Laguna plasma by Laguna Tools

• Available in 4' x 4', 4' x 8', and 5' x 10' • Precision square Profile linear bearing's on X,Y, and Z axes • Covered Y-Axis Bearing Rails • Helical rack and pinion drive system for X and Y axes (Smooth and precise motion for amazing cut quality) • Precision ball screw for Z axis • Central oiling system for all axes • Heavy Duty water table Frame, (Proven Smart Shop Frame and motion devices) (Water table minimizes fumes by cooling flash) • B+R PLC control system with Network-capable Touchscreen (Built in HTTP server for networking, file transfers and remote diagnostics) (4-year track record on controller with SmartShops and IQ) B & R Automation (Austria) • Break away torch holder with sensor (Detects torch collision and stops program) • ARC feedback "Auto Torch Height Control" ATHC system (Uses divided Arc voltage to sense the change in cut height and adjusts automatically.) • The Touchscreen has a simple plasma setup screen to input the cutting parameters from the cut charts pierce height, cut height, pierce delay and feed rate. This allows for ease of set up and the ability to use the same G-code for many different metal thicknesses. This also allows for very simple Cam software like V-carve to work flawlessly. • Overrides for Feed rate that can be adjusted during a program run • Heavy duty .2" thick steel spike plate supports that greatly extend the time you get from your sacrificial support table. Extended life and extra strength for the heaviest of projects

CUTMASTER AUTOMATION SERIES Introducing the next generation of Automated CUTMASTER Systems from Thermal Dynamics®. Based on the same proven platform as the TRUE™ Series, the Cutmaster A-Series offers standard features to meet the needs of many automated applications. Cutmaster Automation • A powerful 80% Duty Cycle to handle all-day production cutting in the toughest environments • Light-weight, compact design and convenient mounting feet allow for easy mounting in any application • Valve in torch design reduces cycle time between parts and increases productivity • CNC Interface connection is located on the rear of the power supply offering “Start/Stop”, and “OK to MOVE” signals • Full arc voltage is available using an internal terminal connection • Software automatically detects the torch that is attached and switches between automation and manual modes • Dedicated automation software improves cycle time and performance in many applications

The new A-Series includes the SL100®SV 1Torch® with standard ATC Quick Disconnect in lengths of 25 ft. (7.6 m), 35 ft. (10.7 m) and 50 ft. (15.2 m) (Longer torch leads up to 100 ft. (30.5 m) available). Our 1Torch start technology eliminates the electronic interference that can occur with other designs. 1Torch provides quick, reliable starts and a strong pilot arc to pierce heavy plate. With auto-pilot restart, it can also cut expanded metal quickly and easily. With all the advantages of 1Torch and proven CUTMASTER reliability, the new automated CUTMASTER A-Series delivers the best in productivity, precision and performance. SureLok® Electrode Technology The innovative, patented, self-locking electrode mechanism eliminates the need for an installation tool and ensures precise electrode and tip alignment. Both the electrode and tip are stationary which results in a highly defined arc and precise cuts. SureLok alignment also means longer tip and electrode life and reduced operating costs.

• Water Table design to control fumes and contain fallout from manufacturing Advanced Controls for Higher-End Users • For advanced users there are fine-tuning parameters for the height control to allow fine tuning for specific production methods • 5 Micron Filter set for the pneumatic air to the power supply, included • Laguna's plasma controller will work with any power supply that can provide a divided ARC feedback less than 10vdc Max

1/2” Plate Steel

Start Cartridge High Frequency has been completely eliminated from the plasma system. A patented component called the “Start Cartridge” sits between the tip and electrode.The Start Cartridge is in contact with the tip while the torch is inactive. When a start signal is given, air forces the cartridge to break contact with the tip and the pilot arc is started. This unique design allows the pilot arc to start without moving either the tip or electrode, resulting in better parts life, cut performance and reliability. The start cartridge is the only moving part in the SL100SV torch.

Superior Quality at All Amperages Whether you are fabricating thick plate or cutting ornamental shapes, the Cutmaster® Automation Series is perfect for the job. At 120 Amp output, the Cutmaster A120 produces the BEST CUT on 1/2" (12 mm) mild steel plate at 70 IPM (1.86 m/ min). For those cutting intricate shapes, select low amperage tips for kerf widths less than 0.045" (1.14 mm) wide. Whether you cut plate, HVAC duct work or ornamental shapes,the Cutmaster A-Series is right for you

7REASONS TO CHOOSE A

LAGUNA CNC

Return on Your Investment producers in the world to ensure that your Laguna CNC offers the best value in the industry with no compromising on quality!

Quality Control

Every Laguna CNC machine goes through a rigorous set of quality control inspections and performance tests before leaving our facility. This ensures that your machine performs flawlessly from day one!

We Are With You All the Way

We make the process of moving to a CNC machine less daunting by walking with you through every step. Not only do we supply the CNC machine technology, we help you select the best software for your application and teach you how to make that product! Send us a drawing, and we will determine the optimum method of producing the part. Laguna Tools is truly a “Technology Transfer” company!

Dedicated Support

We are committed to your success. Our team of CNC experts are only a phone call away to help you get the most out of your Laguna CNC machine.

Increased High Productivity

The Laguna CNC machines have been designed to reduce your material waste, eliminate costly errors and increase your overall shop productivity. Plus, in most cases, the Laguna CNC machines can replace several manual

Innovation

reducing labor costs.

Laguna engineers world-class CNC machines that are both innovative and affordable. Our new “Laguna Touch” CNC machine controls (developed in partnership with B&R Automation of Austria) has redefined the CNC user experience!

Ease of Use

The CNC can replace numerous machines in your shop in one simple operation. The use of a CNC machine is designed to be user friendly and ideal for all skill levels.

Laguna CNCs operate in a non-PC environment for consistent operation using Austrian-made B&R Industrial controls.

The Laguna CNC machines have set a new user-friendly standard for the industry. The machine controls are both easy-to-learn and easy-to-use, regardless of the skill level of the operator. This ensures that you will be able to use the CNC immediately.

Designed and Developed in the USA We use good old American innovation to develop, design and deliver a first-class product.