The 14 |12 continuous to set the standard. When the 14|12 was launched, it surprised everybody by the attention to detail, level of engineering & beautiful fit & finish. It went on to win the praise of reviewers and users around the world for its outstanding performance. It’s a Bandsaw with no compromises.
“… after using a production model of the saw for a few weeks in my own shop, I highly recommend it!” Roland Johnson Fine Woodworking Magazine
14
110V 1.75 HP
TWE LVE OPTIONS SPECIFICATIONS Part Number: MBAN D1412 Motor: 1.75HP 110 Volt 14/7 Amp TEFC 6ft. Cord w/Nema 5-15P Plug √ 110V Outlet on Back for Light √ Min-Max Blade Width: "-¾" Resaw Capacity: 12" Blade Length: 115" Hi/Low Alum. Fence: 18" x 5½" x ½" Table Tilt: -7°, 45° Quick-Release Tension: √ 10-Point Laguna Ceramic Guides: √ Cast Table Size: 21½" X 16" Direct Starter: √ Dual Light Mount: √ Pyramid Shaped Spine: √ Worm Gear Rack & Pinion: √ Massive Cast Trunion: 8" X 13" Dust Ports: 1 X 4" Cast Iron Wheels: √ Anodized Insert w/Micro Adjustment: √ Magnetic Blade Guard: √ Magnetic Blade Tension Guide: √ Flat Poly-Groove Drive Belt: √ Urethane Single Piece Snap-on Tire: √ Table Height: 38" Overall Height: 70¼" Footprint: 25" x 18" x 70¼" Weight (Net/Ship): 258/312 Lbs.
PRO WHEEL SYSTEM MBA14/12 WHEEL SYSTEM • Foot Operated • 360° Omni-Directional • Rubber-Coated Wheels • Adjustable Rubber Pads • Oilite Bronze Bushing Allows for Less Friction and Longer Life • Easy Install with No Drilling Required • Pedal Raises & Lowers Front Wheel • Wheels Mounted Outside Frame to Maximize Stability
Electronically Dynamically Balanced Cast Wheel
PRO LIGHT - DOUBLE ARM ALAREVO18 Light
110V
PRO LIGHT - SHORT ARM 1¾HP TEFC Motor
Laguna Ceramic Guides
Lights Can Mount Top or Side
Dustport 4"
MBA14/12 LIGHT 110V • Swivels 220° • 12 Volt /50 Watt • Tilts Vertically 320° • Built-In Transformer • Independent ON/OFF • Ribbed Aluminum Case • Halogen Hi-Intensity Light • Bright, Glare-Free Flood Light • Designed for Even Light Distribution • Reinforced Glass, Dustproof Design • Top & Side Cabinet Mounting Position
Massive Cast Trunion
3
lagunatools.com
14
110V 220V 1.75 HP
2.5 HP
bx
SPECIFICATIONS
1.75HP
2.5HP
1.75HP 110V Part Number: MBAND14BX110-175 TEFC Motor/14 Amp./6 ft. cord Nema 5-15P Plug 110V Outlet on Back for Light √ Recommended Breaker: 30 Amp. 2.5HP 220V Part Number: MBAND14BX220-250 TEFC Motor/9.8 Amp./6 ft. cord Nema 6-15P Plug 220V Outlet on Back for Light √ Recommended Breaker: 20 Amp. Min-Max Blade Width: 1/8-3/4" Resaw Capacity: 12" Blade Length: 115" Hi/Low Alum. Fence: 18" x 5½" x ½" Table Tilt: -7°, +45° Quick-Release Tension: √ 10-Point Laguna Ceramic Guides: √ Cast Table Size: 21½" X 16" Magnetic Starter: √ Dual Light Mount: √ Pyramid Shaped Spine: √ Worm Gear Rack & Pinion: √ Massive Cast Trunion: 8" X 13" Dust Ports: 2 X 4" Cast Iron Wheels: √ Disc-Brake with Micro Switch: √ Anodized Insert w/Micro Adjustment: √ Magnetic Blade Guard: √ Magnetic Blade Tension Guide: √ Urethane Single Piece Snap-on Tire: √ Table Height: 38" Overall Height: 70 ¼" Footprint: 17½" X 22 ½" Weight (Net/Ship): 260/320 Lbs.
OPTIONS PRO WHEEL SYSTEM MBA14/12 WHEEL SYSTEM • Foot Operated • 360° Omni-Directional • Rubber-Coated Wheels • Adjustable Rubber Pads • Oilite Bronze Bushing Allows for Less Friction and Longer Life • Easy Install with No Drilling Required • Pedal Raises & Lowers Front Wheel • Wheels Mounted Outside Frame to Maximize Stability
PRO LIGHT - DOUBLE ARM ALAREVO18 Light
110V
PRO LIGHT - DOUBLE ARM MBA14BX-LIGHT220-DA
Lights Can Mount Top or Side
220V
• Swivels 220° • 12 Volt/50 Watt • Tilts Vertically 320° • Built-In Transformer • Independent ON/OFF • Ribbed Aluminum Case • Halogen Hi-Intensity Light • Bright, Glare-Free Flood Light • Designed for Even Light Distribution • Reinforced Glass, Dustproof Design • Top & Side Cabinet Mounting Position
18
220V 3 HP
bx
SPECIFICATIONS Part Number: MBAND18BX2203 Motor: TEFC, 3HP, 220V, 1 Ph, 12 Amp. Recommended Breaker: 20 Amp. 220v Outlet on Back for Light √ 6ft. Cord w/Nema 6-15 Plug √ Min-Max Blade Width: ⅛"-1¼" Resaw Capacity: 16" Blade Length: 145" Hi/Low Alum. Fence: 22 ¾" x 7¼" x 1¾" Table Tilt: -6°, +45° Quick-Release Tension: √ 10-Point Laguna Ceramic Guides: √ Cast Table Size: 20" x 26" Magnetic Starter: √ Dual Light Mount: √ Pyramid Shaped Spine: √ Worm Gear Rack & Pinion: √ Cast Trunion: 8" X 13" Dust Ports: 2 X 4" Cast Iron Wheels: √ Disc-Brake with Micro Switch: √ Anodized Insert w/Micro Adjustment: √ Magnetic Blade Guard: √ Magnetic Blade Tension Guide: √ Flat Poly-Groove Drive Belt: √ Urethane Single Piece Snap-on Tire: √ Table Height: 38" Overall Height: 77¾" Footprint: 36" x 30" Weight (Net/Ship): 410/460 Lbs.
*Shown with Optional Wheel System
OPTIONS PRO WHEEL SYSTEM MBA18BX-CX-WS • Foot Operated • 360° Omni-Directional • Rubber-Coated Wheels • Adjustable Rubber Pads • Oilite Bronze Bushing Allows for Less Friction and Longer Life • Easy Install with No Drilling Required • Pedal Raises & Lowers Front Wheel • Wheels Mounted Outside Frame to Maximize Stability
PRO LIGHT - DOUBLE ARM MBA14BX-Light220-DA 220V
Lights Can Mount Top or Side
• Swivels 220° • 12 Volt/50 Watt • Tilts Vertically 320° • Built-In Transformer • Independent ON/OFF • Ribbed Aluminum Case • Halogen Hi-Intensity Light • Bright, Glare-Free Flood Light • Designed for Even Light Distribution • Reinforced Glass, Dustproof Design • Top & Side Cabinet Mounting Position
5
lagunatools.com
Laguna Tools Bandsaw Blades are constructed of hand-picked metals from all over the world to ensure the finest cuts. We weld all of our blades in-house and cut any custom size at no extra charge! We supply some of the most rigid blades in the world with shining customer service to match.
The Resaw King is perhaps the world's finest resawing blade. Manufactured with C4 carbide teeth, this blade allows you to cut ultra-smooth, wafer-thin veneers with minimal waste. Woodworkers demanding the best will be impressed. The triple vari-tooth design minimizes vibration and lowers harmonics. Teeth are individually brazed and ground to perfection using diamond wheels on our custom-built Shark grinder designed exclusively for this blade. The Resaw King is the ideal blade for anyone cutting hardwoods or exotics, providing ultra-smooth cut quality with minimal material loss. Nearly a decade in the making, the Resaw King has been skillfully finessed into one of the best woodworking blades in the world. Created by Torben Helshoj, an award-winning woodworker, the Resaw King displays his passion for the art. Made from a C4 carbide tipped alloy, the Resaw King can be resharpened 4-5 times! Variable tooth spacing significantly reduces vibration while producing sleek, smooth cuts. This dynamic blade also cuts down wood waste due to its ultra-thin kerf and backing material, saving you money. The Resaw King is manufactured in Germany exclusively for Laguna Tools and is perfected here, in the USA, by our skilled team of professionals using our full line of CNC machines.
n Elite Resaw Blade
n Ultra-Thin Kerf
n 4X Resharpenable
n C-4 Carbide Tipped
n Very Smooth Finish
VARIABLE TOOTH PITCH
14MM
16MM
18MM
SPECIFICATIONS Sizing
Kerf
Backing
Sizing
Kerf
Backing
3/4"
1.1mm
.024" (.6mm)
1 1/4"
1.1mm
.024" (.6mm)
1"
1.1mm
.024" (.6mm)
2"
1.1mm
.024" (.6mm)
Made in the USA, the Shear Force blade is compatible with nearly every bandsaw. Manufactured with an ultra-thin .024" backing and alternating 3-4, TPI it ensures a smoother cut and significantly reduces vibration. If you are looking for a versatile blade with an exceptional precision cut, Shear Force is your blade. This blade is truly unique in every way. n Perfect for Resawing
n .024" Backing
n Heavy-duty blade
n Made From Carbon Steel
SPECIFICATIONS Width TPI Backing Thickness 5/8" 3-4 025" 025" 1" 3-4
Material Carbon Steel
Cutting Radius 4"
Carbon Steel
N/A
Cut Finish
Cutting Speed
Smooth Medium Smooth
Medium
n Thin Kerf reduces waste
Direct from Sweden, our Proforce blade stock is the finest on the market. You will immediately notice the difference in quality and precision with the new Proforce. The Proforce is an affordable blade without compromising the cut. Every blade is hand welded on a state-of-the-art welder by one of our skilled professionals. Individually inspected for quality control and backed by a 1 year manufacturer’s warranty, the Proforce is a high quality blade with an economy price.
SPECIFICATIONS Width
TPI
Backing Thickness
Material
Cutting Radius
Cut Finish
Cutting Speed
1/8" 1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" 1" 1" 1 1/4" 1 1/4" XT 2"
14 4 6 14 4 14 3 14 3 3 3-4 3-4 3-4 3-4
.025" .025" .025" .025" .025" .025" .025" .025" .025" .035" .042" .042" .028" .035"
Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
3/16" 5/8" 5/8" 5/8" 1 1/2" 1 1/2" 2 1/2" 2 1/2" 5 1/2" 7" 7" N/A N/A N/A
Smooth Rough Medium Smooth Rough Smooth Rough Smooth Rough Rough Rough Rough Rough Very Rough
Slow Fast Medium Slow Fast Slow Fast Slow Fast Fast Very Fast Fast Fast Very Fast
7
lagunatools.com
“About as close as it comes to sheer perfection in a woodworking lathe.”
“This lathe is an absolute overachiever in its price range.”
1 10V
220V
1.5 HP
2 HP
MLAREVO 1836 110V
SPECIFICATIONS 110V
MLAREVO 1836 220V
220V
US Patent 9,370,872 and 9,557,000
STANDARD ON REVO 18|36 & REVO 24|36 n n n n n n n n n n
12" Tool Rest with 6mm Leading Edge Dual Cast Iron Mounting Brackets Knockout Rod with brass tip 4 X Hard Nylon Pads Luxury Live Center 3" Face Plat 2 X Stop Pins Drive Center Tool Caddy Lock Rod
√ √ √ √ √ √ √ √ √ √
110V Motor: TEFC, 1725 RPM, 1.5 HP, 4.2A 220V, 3PH 110V Recommended Breaker: 15 Amp 110V Phase: Single phase input, 3-phase output 220V Motor: TEFC, 1725 RPM, 2 HP, 5.2A 220V, 3PH 220V Recommended Breaker: 15 Amp 220V Phase: Single phase input, 3 phase output VFD: Delta S1 Variable Frequency Drive Phase: 1-Phase Input, 3-Phase Output Drive Belt: Poly-Groove with EZ Access Tailstock Quill: 4½", Engraved, Self-Ejecting Floor to Spindle Center: 41½" w/Pads Front Bearing: TPI Taiwan 6207LLU Rear Bearing: TPI Taiwan 6205LLU Spindle Index#: 14/36/48 w/Lock Distance Between Centers: 36" Headstock Through-Bore: 3/8" Tailstock Through-Bore: 3/8" Spindle Size: 1¼" X 8 TPI RH Floor to Bed: 32½" with Pads Spring Loaded Spindle Lock √ Max. Outboard Swing: 32" Swing over Banjo: 13½" Headstock Spindle: MT2 taper hardened to 40° HRC Tailstock Quill: MT2 taper hardened to 40° HRC Swing Over Bed: 18" RPM: High: 135-3500 Low: 50-1300 Dimensions: W 60" D 26" H 47" Weight for 110V (Net/Ship): 425/478 Lbs. Weight for 220V (Net/Ship): 427/480 Lbs.
OPTIONS q q q q q q q q q q
20" Extension, Tailstock Base, Tool-Rest Ext. Industrial Flood Light (Fits Two) 12" Swing-Away Extension Deluxe Wheel System Cast Iron Leg w/Pads 58" Bed without Leg Inverter for Vacuum Headstock Guard 3" Riser Block Kit Comparator
220V 3 HP MLAREVO 2436 220V
*Shown with Optional Lights
SPECIFICATIONS Motor: TEFC, 1725 RPM, 3 HP, 8A 220V, 3PH Recommended Breaker Size: 15 Amp Phase: 1-Phase Input, 3-Phase Output VFD: Delta S1 Variable Frequency Drive Remote Control Box w/Speed Settings: √ Two Ergonomic Control Panel Positions: High/Low Drive Belt: Poly-Groove with EZ Access Tailstock Quill: 4½", Engraved, Self-Ejecting Floor to Spindle Center: 44½" Front Bearing: TPI Taiwan 6307LLU Rear Bearing: TPI Taiwan 6205LLU Spindle Index#: 14/36/48 w/Lock Distance Between Centers: 36" Headstock Through-Bore: 3/8" Tailstock Through-Bore: 3/8" Spindle Size: 1¼" X 8 TPI RH Floor to Bed: 32½" with Pads Spring Loaded Spindle Lock √ Max. Outboard Swing: 38" Swing over Bajo: 19 ¾" Face Plate: 3" Diameter Tool Rest: 12" Headstock Spindle: MT2 taper hardened to 40° HRC Tailstock Quill: MT2 taper hardened to 40° HRC Swing Over Bed: 24" RPM: High: 135-3500 Low: 50-1300 Dimensions: 60" W x 26" D x 52¼" H Weight for 220V (Net/Ship): 532/605 Lbs. *Shown with Optional Lights US Patent 9,370,872 and 9,557,000
STANDARD ON REVO 18|36 & REVO 24|36
Standard Equipment
n n n n n n n n n n
12" Tool Rest with 6mm Leading Edge Dual Cast Iron Mounting Brackets Knockout Rod with brass tip 4 X Hard Nylon Pads Luxury Live Center 3" Face Plat 2 X Stop Pins Drive Center Tool Caddy Lock Rod
√ √ √ √ √ √ √ √ √ √
OPTIONS q 20" Extension, Tailstock Base, Tool-Rest Ext. q Industrial Flood Light (Fits Two) q 12" Swing-Away Extension q Deluxe Wheel System q Cast Iron Leg w/Pads q 58" Bed without Leg q Inverter for Vacuum q Headstock Guard q 3" Riser Block Kit q Comparator
9
lagunatools.com
L-Shaped dual mount motor bracket Eliminates vibration, notice the width of vertical bracket Single piece main-plenum construction Allows air to flow freely into canister with little resistance Radial steel fan Balanced to ISO 1940 Standards
Inlet with splitter & sealed cap Rubber, not plastic caps
Generation II canister has much improved surface area Canister Paper made in Denmark
Ingenious Lift system requires no flex hose This unique design creates a strong seal against drum lid
High Quality Swiveling Casters 4" Diameter (Frame Casters) 3" Diameter (Drum Casters)
CYCLONE SECRETS LAGUNA FAN DESIGN Nothing is more critical than the fan, the design and quality is paramount to obtain maximum performance. Laguna fans are made from riveted steel, except the T FLUX 10 and X FLUX10 which uses welded steel. All fans are first static balanced then dynamically balanced according to ISO 1940 mechanical vibration requirements for rotors in a rigid state. We use a backward curved fin design on all fans.
CYCLONE REMOTE Laguna has designed the remote for the AIR category to operate using High Frequency. This technology does not require line-of-sight & will not interfere with fluorescent lights
THE GOLDEN TRIANGLE Cyclones are difficult, they are designed to put maximum amount of dust directly into drum without ever passing through the fan, however in order to do so the position & angle of inlet, the diameter of barrel, the shape of cone, the length of return wane along with other details must all work together. This is what we call the Golden Triangle.
11
lagunatools.com
CYCLONE DUST COLLECTORS SPECIFICATIONS Part Number: MDCBF1110C1M Motor: 1HP, 110V, 1PH, 60Hz, 7 Amps Recommended Breaker Size: 15 Amps RPM: 3450 CFM Shop* / Inlet: 550 / 650 Max Static Pressure (inches of water): 4.86" Inlet Diameters: 4" X 1" Port Impeller: 9" Steel Radial Fin Drum Collection Plastic Bag: 350 x 980mmL Canister Diameter: 14.2" Canister Length: 11.8" Filter Surface Area: 1.6m2/17.2 ft2 Canister Filter Type: 1 Micron Filtration Efficiency: 0.2-2 micron @ 99.97% MERV Rating: 12 Canister Cleaning: Manual Crank Decibel Reading: 76 d B(A) (@9.8ft) Dimensions: 29" x 15" x 50" Weight (Net/Ship): 71/77 Lbs.
SPECIFICATIONS Part Number: MDCCF15110 Motor: 1½HP, 110V, 1PH, 60Hz, 18.8 Amps Recommended Breaker Size: 30 Amps 6ft. 3 Wire Cord with No Plug: √ RPM: 3450 Switch: Magnetic On/Off Hand-held Remote Control: High Frequency CFM Shop* / Inlet: 900/1314 Max Static Pressure (inches of water): 10.1" Inlet Diameters: 6" x 4" X 2 Ports Impeller: 13.5” Steel Radial Fin Drum Capacity: 32 Gal. Bag Hold-Down: Metal Insert Canister Filter Type: 1 Micron Filtration Efficiency: 0.2-2 micron @ 99.97% MERV Rating: 12 Canister Cleaning: Manual Crank 360° Decibel Reading: 82 d B(A) (@9.8ft) Dimensions: 43" x 24" x 69" Weight (Net/Ship): 232/287 Lbs. *220V Operation requires purchase of additional parts.
SPECIFICATIONS
SPECIFICATIONS Part Number: MDCCF22201 Motor: 2HP, 220V, 1PH, 60Hz, 14 Amps Recommended Breaker Size: 20 Amps 6ft. 3 Wire Cord with No Plug: √ RPM: 3450 Switch: Magnetic On/Off Hand-held Remote Control: High Frequency CFM Shop* / Inlet: 1166 / 1740 Max Static Pressure (inches of water): 9.3" Inlet Diameters: 6" x 4" X 2 Ports Impeller: 14.5" Steel Radial Fin Drum Capacity: 46 Gal. Bag Hold-Down: Metal Insert Canister Filter Type: 1 Micron Filtration Efficiency: 0.2-2 micron @ 99.97% MERV Rating: 12 Canister Cleaning: Manual Crank 270° Decibel Reading: 88 d B(A) (@9.8ft) Dimensions: 46" x 27" x 79" Weight (Net/Ship): 296/364 Lbs.
Part Number: MDCCF32201 Motor: 3HP, 220V, 1PH, 60Hz, 22 Amps Recommended Breaker Size: 30 Amps 6ft. 3 Wire Cord with No Plug: √ RPM: 3450 Switch: Magnetic On/Off Hand-held Remote Control: High Frequency CFM Shop* / Inlet: 1624 / 2817 Max Static Pressure (inches of water): 11.2" Inlet Diameters: 8" x 4" X 3 Ports Impeller: 15.5" Steel Radial Fin Drum Capacity: 46 Gal. Bag Hold-Down: Metal Insert Canister Filter Type: 1 Micron Filtration Efficiency: 0.2-2 micron @ 99.97% MERV Rating: 12 Canister Cleaning: Manual Crank 270° Decibel Reading: 82 d B(A) (@9.8ft) Dimensions: 46" x 27" x 79" Weight (Net/Ship): 309/375 Lbs.
OPTIONAL AUTO CLEAN This upgrade allows automatic cleaning on any of the c|flux series cyclones. It includes motor, cover plate & sensor that turns on when pressure rises inside canister.
110V ADCACKIT110
220V ADCACKIT220
The auto clean is programmed from factory to run 10 seconds clockwise, 10 seconds counter clockwise.
13
lagunatools.com
CYCLONE DUST COLLECTORS
SPECIFICATIONS Part Number: MDCPF15110 Motor: 1½HP, 110V, 1PH, 60Hz, 18.8 Amps Recommended Breaker Size: 30 Amps 6ft. 3 Wire Cord with No Plug: √ RPM: 3450 Control Panel: Anodized Aluminum Switch: Magnetic On/Off Hand-held Remote Control: High Frequency Canister Clean Warning LED Drum Full Warning LED CFM Shop* / Inlet: 900 / 1314 Max Static Pressure (inches of water): 10.1" Inlet Diameters: 6" x 4" X 2 Ports Impeller: 13.5" Steel Radial Fin Drum Capacity: 32 Gal. Bag Hold-Down: Auto Negative Pressure Canister Filter Type: HEPA Filtration Efficiency: 0.4 micron @ 99.2% MERV Rating: 16+ Canister Cleaning: Use External Air Compressor Decibel Reading: 70 d B(A) (@9.8ft) Dimensions: 46" x 24" x 69" Weight (Net/Ship): 269/331 Lbs. *220V Operation requires purchase of additional parts.
SPECIFICATIONS Part Number: MDCPF22201 Motor: 2HP, 220V, 1PH, 60Hz, 14 Amps Recommended Breaker Size: 20 Amps 6ft. 3 Wire Cord with No Plug: √ RPM: 3450 Control Panel: Anodized Aluminum Switch: Magnetic On/Off Hand-held Remote Control: High Frequency Canister Clean Warning LED Drum Full Warning LED CFM Shop* / Inlet: 1166 / 1740 Max Static Pressure (inches of water): 9.3" Inlet Diameters: 6" x 4" X 2 Ports Impeller: 14.5" Steel Radial Fin Drum Capacity: 46 Gal. Bag Hold-Down: Auto Negative Pressure Canister Filter Type: HEPA Filtration Efficiency: 0.4 micron @ 99.2% MERV Rating: 16+ Canister Cleaning: Use External Air Compressor Decibel Reading: 76 d B(A) (@9.8ft) Dimensions: 6" x 27" x 80" Weight (Net/Ship): 340/408 Lbs.
SPECIFICATIONS Part Number: MDCPF32201 Motor: 3HP, 220V, 1PH, 60Hz, 22 Amps Recommended Breaker Size: 30 Amps 6ft. 3 Wire Cord with No Plug: √ RPM: 3450 Control Panel: Anodized Aluminum Switch: Magnetic On/Off Hand-held Remote Control: High Frequency Canister Clean Warning LED Drum Full Warning LED CFM Shop* / Inlet: 1624 / 2817 Max Static Pressure (inches of water): 11.2" Inlet Diameters: 8" x 4" X 3 Ports Impeller: 15.5" Steel Radial Fin Drum Capacity: 46 Gal. Bag Hold-Down: Auto Negative Pressure Canister Filter Type: HEPA Filtration Efficiency: 0.4 micron @ 99.2% MERV Rating: 16+ Canister Cleaning: Use External Air Compressor Decibel Reading: 82 d B(A) (@9.8ft) Dimensions: 46" x 27" x 80" Weight (Net/Ship): 351/419 Lbs.
SPECIFICATIONS Part Number: MDCTF52201 Motor: 5HP, 220 Volt, 1PH, 60Hz, 22.4 Amp Recommended Breaker Size: 40 Amp RPM: 3450 Control Panel: Anodized Aluminum Switch: Magnetic On/Off Drum Full Warning: LED & Beep CFM Shop* / Inlet: 2450 / 4295 Max Static Pressure (inches of water): 12.30" Inlet Diameter: 10" Splitter: 4 x 4" Canister Diameter: 23.62" Canister Length: 47.24" Filter Surface Area: 15m2 / 162ft2 Impeller: 16" Steel Radial Fin Balanced To: ISO 1940 Drum Capacity: 54 Gal. Octagon Drum: Low Pressure Suction Canister Filter Type: 1 Micron Filtration Efficiency: 0.2-2 micron @ 99.97% MERV Rating: 12 Canister Cleaning: Auto Clean (Gear Motor) Decibel Reading: 82 d B(A) (@9.8ft) Dimensions: 72" x 39" x 111" Weight ( Net / Ship): 717/948 Lbs.
15
lagunatools.com
FUSION 2 TABLE SAW
HAVING EARNED A STELLAR REPUTATION FOR YEARS HAS NOW EXPANDED THE TABLESAW LINE-UP TO INCLUDE TWO BRAND NEW MODELS
SPECIFICATIONS
n New TEFC Motor n Single Belt Operation n Uber Smooth Controls n Quick-Release Blade Guard
Part Number: Motor:
MTSF236110175-0130 1.75 HP, 115V, 1-Phase, 3450 RPM
Amp: Recommended Breaker Size Rip Capacity:
n Single Piece Right Fence Rail n Blade Lock when Changing Blades n Gearing has been Changed to Move Arbor Faster n Trunnion is Completely Redesigned & Tested for Strength
Max. Depth of Cut @ 90°: Max. Depth of Cut @ 45°: Max Dado Capacity: Blade Diameter: Blade Tilt:
14 FLA 30 AMP 36" Standard, 52" Option 3 1/8" 2 1/8" 8" x 13/16" 10" 0 – 45° Left
Mitre Slots:
¾" with 1" T
Arbor Size:
5/8"
Arbor Speed: Dust Collection: Dimension: Weight (Net/Ship):
4500 RPM 4" Outlet, 500 CFM 39¾" L x 65½" W x 38" H 275/368 Lbs.
*220V Operation requires purchase of additional parts.
FUSION 3 TABLE SAW
52" Rip Fence, 2 Support Legs & Black MDF Table
SPECIFICATIONS Part Number: Motor:
MTSF3362203-0130 3HP, 230V, 1-Phase, 3450 RPM
Amp: Recommended Breaker Size Rip Capacity:
14 FLA 30 AMP 36" Standard, 52" Option
Max. Depth of Cut @ 90°:
3 1/8"
Max. Depth of Cut @ 45°:
2 1/"
Max Dado Capacity: Blade Diameter: Blade Tilt: Mitre Slots:
8" x 13/16" 10" 0 – 45° Left3° Arbor Adjust. ¾" with 1" T
Arbor Size: ⅝ 5/8" Arbor Speed: Dust Collection: Dimension: Weight (Net/Ship):
FUSION 2 MTSF252110175-0130 FUSION 3 MTSF3522203-0130
4500 RPM
Optional 0 Clearance Dado Throat Plate
4" Outlet, 550 CFM 39¾" L x 65½" W x 38" H 291/390 Lbs.
17
lagunatools.com
SHEAR-TECll JOINTER
6" DOVETAIL SPECIFICATIONS Part Number: MJOIN600 Motor: 1.5HP TEFC, 110V Motor Amperage Rating: 13 Amp. Cutter-Head RPM: 5000 Cutter-Head: Shear-TecII #Rows of Inserts: 6 #Usable Sides of Inserts: 4 Total inserts: 6 X 7 = 42 Design: Crowned Leading Edge Material: Solid Carbide Adjustment Dovetail
6 Row 15x15x2.5mm Solid Carbide Cutting Width: 6" Cutting Depth: ½" Rabbeting Capacity: ½" Cutter-Head Diameter: 2.4" Table Dimensions: 6" X 56" Fence Dimensions: 4" X 29" Fence Tilt: 90° & 45° with Positive Stop Table Height 32.2" Dust Port: 4" Wheel System: Built-In Weight (Net/Ship): 388/425 Lbs.
8" DOVETAIL SPECIFICATIONS Part Number: MJOIN8012 Motor: 2HP TEFC, 220V, 1-Phase Motor Amperage Rating: 8 Amp. Cutter-Head RPM: 5600 Cutter-Head: Shear-TecII #Rows of Inserts: 6 #Usable Sides of Inserts: 4 Total inserts: 6 X 9 = 54 Design: Crowned Leading Edge Material: Solid Carbide Adjustment: Dovetail
6 Row 15x15x2.5mm Solid Carbide Max. Width: 8" Max. Depth: ½" Rabbeting Capacity: ½" Cutter-Head Diameter: 3" Table Dimensions: 8" X 75" Fence Dimensions: 4" X 38" Fence Tilt: 45°, 90° and 45° Positive Stop Table Height: 32" Dust Port: 4" Wheel System: Built-In Weight (Net/Ship): 510/600 Lbs.
8" PARALLELOGRAM SPECIFICATIONS Part Number: MJOIN8020 Motor: 3HP TEFC, 220V, 1-Phase Motor Amperage Rating: 13 Amp. Cutter-Head RPM: 5000 Cutter-Head: Shear-TecII #Rows of Inserts: 6 #Usable Sides of Inserts: 4 Total inserts: 6 X 9 = 54 Design: Crowned Leading Edge Material: Solid Carbide Adjustment: Parallelogram Max. Width: 8"
6 Row 15x15x2.5mm Solid Carbide
Max. Depth: ½" Rabbeting Capacity: ½" Cutter-Head Diameter: 3" Table Dimensions: 8" X 83" Fence Dimensions: 4¾" X 40" Fence Tilt: 90° & 45° with Positive Stop Table Height: 33" Dust Port: 4" Wheel System: Built-In Weight (Net/Ship): 648/750 Lbs.
12" PARALLELOGRAM SPECIFICATIONS Part Number: MJOIN12X86 Motor: Leeson, 5HP TEFC, 220V, 1-Ph Motor Amperage Rating: 22 Amp. Cutter-Head RPM: 5500 Cutter-Head: Shear-TecII #Rows of Inserts: 6 #Usable Sides of Inserts: 4 Total inserts: 6 X 14 = 84 Design: Crowned Leading Edge Material: Solid Carbide Adjustment: Parallelogram
6 Row 15x15x2.5mm Solid Carbide
Max. Width: 12" Max. Depth: ½" Rabbeting Capacity: ½" Cutter-Head Diameter: 4" Table Dimensions: 12" X 87 ¾" Fence Dimensions: 5" X 60" Fence Tilt: 90° & 45° with Positive Stop Height From Floor: 33" Dust Port: 6" Wheel System: Built-In Weight (Net/Ship) 880/1078 Lbs.
19
lagunatools.com
SHEAR-TECll TECHNOLOGY
• 6 Rows • 4-Sided • Ultra Quiet • Solid Carbide • Extreme Longevity • Crowned Leading Edge
T-Shoulder
Cone-Shaped
• T- shaped step recess design is less susceptible to breaking.
• Standard head only accepts max. of 65lbs of torque.
• Laguna Shear-TecII can handle torque force up to 120lbs.
• Standard cone-shaped design causes the knife to be brittle.
• Laguna Shear-TecII is a 6-row system, which results in a better finish & longer life.
OPTIONS
SHEAR-TEC II INSERTS 10 pack of 4-sided solid carbide inserts.
16" SHEAR-TECII SPECIFICATIONS Part Number: MPLAN1510 Motor: 5HP, 1 Phase, 220 Volt TEFC Readout: Digital with Tape Backup Table: W 16" x D 56" Incl. 2 x Extensions Cutter-Head RPM: 5000 Cutter-Head: Shear-TecII #Rows of Inserts: 6 #Usable Sides of Inserts: 4 Total inserts: 6 X 18 = 108 Design: Crowned Leading Edge Material: Solid Carbide
6 Row 15x15x2.5mm Solid Carbide 2 Feed Speeds: 16 & 20 Ft/Min Mechanical Adjustment of Bed: √ Mechanical Adjustment of Bed Rollers: √ 2x Cast Iron Extension Tables Included: √ 2x Polished Steel Rollers for Material Return Dust-Hood: 4" Max Removal: 1/8" Min-Max: " – 6" Dimension w/Ext: W 35" x D 44" x H 45" Wheels Built-In: √ Weight: (Net/Ship): 567/668 Lbs.
SHEAR-TECll PLANER
Standard equipment includes: DRO, in/outfeed extensions, built-in wheel system. The ShearTecII Cutter Head is a 6 row system which equals longer life, superior finish. Knives are positioned to cut at an shear angle while deep gullets & thicker knives allow for better removal. Another benefit of the ShearTecII head is the noise level; customers cannot believe how ultra-quiet they run.
20" SHEAR-TECll SPECIFICATIONS Part Number: MPLAN2010 Motor: 5HP TEFC, 220V, 1-Phase Readout: Digital with Tape Backup Table: D 56" X W 20" Incl. 2 x Extensions Cutter-Head RPM: 5000 Cutter-Head: Shear-TecII #Rows of Inserts: 6 #Usable Sides of Inserts: 4 Total inserts: 6 X 23 = 138 Design: Crowned Leading Edge Material: Solid Carbide
6 Row 15x15x2.5mm Solid Carbide 2 Feed Speeds: 16 & 20 Ft/Min Mechanical Adjustment of Bed: √ Mechanical Adjustment of Bed Rollers: √ 2x Cast Iron Extension Tables: √ Dust-Hood: 4" Max Removal: ⅛" Min-Max: " – 8" Overall Dimension W 39" x D 60" x H 45" Wheels Built-In: √ Weight: (Net/Ship): 880/990 Lbs.
21
lagunatools.com
COMPACT SHAPER
The Compact Shaper impressive precision fence and wide-range RPM make it a versatile investment for any pro. 4 speeds, generous sized table, wheels built right in. Easy spindle lock makes tool changes a snap. One of the most impressive features is the speed change. A simple pull of a handle compresses the distance from the spindle to the pulley, changing speeds along the way. Another outstanding detail is the flat poly-groove belt which transfers more power with less vibration; something you won’t find in this price range anywhere else.
SPECIFICATIONS INCLUDES
½" Collet
¼" Collet
1¼" Spindle
¾" Spindle
Part Number: MSHAP4SPD Motor: 3HP, 220V, 1-Phase Table Size: 32" X 26½" X 34" Spindle Travel: 4" Spindle Sizes: ¾" & 1¼" Router Collets: ¼" & ½" Capacity Under Nut: 4" (1¼" Spindle) 3½" (¾" Spindle) Spindle Speeds: 4000, 6000, 8000, 10000 RPM Table Opening Diameter: 6¼" Table Insert Opening Diameter: 2½", 4"
Rotation: Forward/Reverse Fence Size: 4" x 16" Drive Belt: Flat Poly-Groove Dust Port 4" Table T-Slot: √ Micro Adjustment on Fence: √ Wheels Built-In: √ Miter Guage: √ Pre-Drilled for Feeder: √ Weight (Net/Ship): 450/500 Lbs.
PRO SHAPER INCLUDES
The Pro Shaper table measures an impressive 31 x 39″ and is predrilled to accept most power feeders. The fence has a precision micro-adjustment that is aligned by a solid steel bar. Each full revolution of the turn handle gives an exact 1/16″ adjustment to the fence. Inside you will find a heavy-duty motor available in either 5HP 220 volt single phase or 7.5 HP 220 volt three phase. Each offers 3 speeds with a unique quick change poly-groove belt system rather than the traditional V-belt. Digital readout is standard for the spindle height.
½" Collet
¼" Collet
1¼" Spindle
¾" Spindle
The Pro Shaper is also equipped with a reversing switch and all controls are mounted with an easy access panel.
SPECIFICATIONS 110V 220V
Part Number: MSHAP5010 Motor: 5HP, 220V, 1-Phase Part Number: MSHAP5030 Motor: 7.5HP, 220V, 3-Phase Table Size: 39" X 31" X 3½" Spindle Travel: 4" Spindle Sizes: ¾" and 1¼" Capacity Under Nut: 6" (1¼" Spindle) 4" (¾" Spindle) Router Collets: ¼" and ½" Spindle Speeds: 5000 / 7000 / 10000 RPM Table Opening Diameter: 7"
Digital Readout: √ Rotation: Forward/Reverse Fence Size: 4" x 16" Drive Belt: Flat Poly-Groove Dust Port: 4" Table T-Slot: √ Micro Adjustment on Fence: √ Wheels Built-In: √ Miter Gauge: √ Pre-Drilled for Feeder: √ Weight (Net/Ship): 640/720 Lbs.
Easy Belt Change
23
lagunatools.com
SUPERMAX 16-32
EXCEPTIONAL SUPERMAX FEATURES n Patented “Quick Lever Adjustment” which allows height adjustments from 0-3″ with one pull of a lever versus 48 revolutions of a hand wheel greatly reducing set-up time and increases productivity. n Includes built-in Digital Read Out which helps maintain consistent thicknesses to increase accuracy and quality. n A newly designed Turbo Vented Dust Port increases CFM air-flow to dust collectors by 15%. n Simple alignment feature – just one nut adjusts the conveyor to parallel the sanding head, making aligning the conveyor to the sanding head fast and easy. n Indexed alignment setting – the fast lever is an indexed alignment setting for narrow and wide stock. When sanding stock wider than 16″, the index lever will properly adjust the conveyor for flawless wide sanding. n Drum will never go “out of alignment” – the drum carriage is bolted to the base, preventing any movement or alignment issues. n INTELLISAND Technology.
SPECIFICATIONS
DRO Standard Equipment
Drum Speed Maximum Sanding Width Minimum Sanding Length Maximum Sanding Thickness Minimum Sanding Thickness Drum Dust hood Conveyor Speed Drive Motor Power Requirements Shipping Weight Assembled Dimensions (Footprint)
1740 RPM 32"″ 2-1/4"″ 3″ 1/32"″ 5" x 16"″ extruded aluminum Turbo Vented – 1"×4", vacuum port (min. 600 CFM recommended) 0-10 FPM 1-1/2 HP 110 V, 15 Amp, 20 AMP Service 158 lbs (1 box including stand) W: 34" | D: 22" | H: 48" (without casters)
SUPERMAX 19-38
EXCEPTIONAL SUPERMAX FEATURES n Drum will never go “out of alignment” The drum carriage is bolted to the base, preventing any movement or alignment issues. n Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex” in conveyor, guaranteeing flatness to less than .010″ across the width of the sander. n Abrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinner. n Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlap. n Easiest access to abrasive fastening system of any drum sander! Extra wide space to access fasteners to eliminate need for special tools. n Self-cooling drum prevents overheating and extends abrasive life.
SPECIFICATIONS
Awarded 5/5 Stars from Wood and Editor’s Pick from American Woodworker!
Sanding Capacity:
Maximum Width (in): 38" (two passes) Minimum Length (in): 2-1/4" Maximum Thickness (in): 4" Minimum Thickness (in): 1/32"
Dimensions (in): Drum (in): Drum Speed: Dust Hood: Conveyor Motor: Drive Motor (TEFC): Power Requirements: Shipping Weight (lbs):
27"D x 46"W x 52"H (on stand) 5"x19" extruded aluminum 1740 RPM 1"- 4"″ vacuum port, min. 600 CFM recommended 43 in.-lb. torque, direct drive D.C. motor, ranged variable 0-10 FPM 1-3/4 HP 110 V, 15 amp 286 (3 boxes incl. stand)
25
lagunatools.com
SUPERMAX 25-50
EXCEPTIONAL SUPERMAX FEATURES n Indexed alignment setting Has an indexed alignment setting for narrow and wide stock. When sanding stock wider than 25", the index lever will properly adjust the conveyor for flawless wide sanding. n Easy height adjustments. A thrust bearing below the handle and a nut positioned above prevents the drum from moving out of the set position while sanding. No backlash or slop in the height adjustment mechanism allowing easier and smoother height adjustments. n Drum will never go “out of alignment”. The drum carriage is bolted to the base, preventing any movement or alignment issues. n INTELLISAND™ Technology: Automatically adjusts conveyor speed based on load. n Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex” in conveyor, guaranteeing flatness to less than .010 across the width of the sander. n Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlap. n Tension rollers are adjustable in height and hold down pressure, eliminating snipe.
SPECIFICATIONS Sanding Capacity:
Maximum Width (in): 50" (two passes) Minimum Length (in): 2-1/4" Maximum Thickness (in): 4" Minimum Thickness (in): 1/32"
Dimensions (in): Drum: Drum Speed: Dust Hood: Conveyor Motor: Drive Motor (TEFC): Power Requirements: Shipping Weight (lbs):
27"D x 46"W x 53"H (on stand) 5 x 25 extruded aluminum 1740 RPM 1"- 4"″ vacuum port, min. 600 CFM recommended 43 in.-lb. torque, direct drive D.C. motor, ranged variable 0-10 FPM 1-3/4 HP 110 V 20 amp 369 (3 boxes incl. stand)
SUPERMAX ACCESSORIES
*Item shown fits on our 19-38 and 25-50 drum sanders.
Expandable Roller Stand
SuperMax Digital Read Out
The expandable roller stand assistive conveyor. Adjustable height and length make it ideal for any size workshop. Part Number 875600
The DRO (Digital Read Out). Advised for those who need a high level of accuracy with the thickness of their wood after sanding.
SPECIFICATIONS Maximum Load Capacity – 200lbs Minimum Length – 14" 3/4"″ Maximum Length – 50"″ Adjustable Height – 23"″ to 36"″ Number of Rollers – 9 Nickel Plated Rollers Dimensions (Dia x W) – 1" 1/2" x 13" 3/4"″ Swivel Casters – 4"x 3"″ W/Footbrake
SuperMax Abrasive Cleaning Stick
SuperMax Infeed Outfeed Tables
Use our abrasive cleaning stick to clean up your sandpaper and get it back in shape.
SuperMax infeed and outfeed tables help accommodate larger pieces of wood for sanding. Fits the 16-32,19-38 and the 25-50 Drum Sander.
SuperMax Casters
Bulk Sand Paper Rolls
SuperMax Abrasive Conveyor Belts
Create a convenient workspace by equipping your SuperMax machines with wheels!
Comes in 36, 60, 80, 100, 120, 150, 180, & 220 Grit Sand Paper.
Sizes and part numbers for machines: 16-32 Drum Sander, Part Number 60-0316 19-38 & 25-50 Drum Sander, Part #60-0322
27
lagunatools.com
supermaxtools.com