& TRICKS

To clean up wood or MDF after cutting, use a Magic Eraser by Mr. Clean or a generic equivalent.

Dampen it and rub until the residue is removed. Wipe off excess moisture immediately, especially if you are working with MDF.

Comes right up, project saved!

Various Sources

For Glowforge Users: Ever wonder why the working size of your bed seems to change - well, the speed impacts the useable space. Here is a guide, courtesy of Jonathan Gleich and the Friendliest Glowforge Group on Facebook.

Trouble lifting those magnets from your honeycomb? Sandwich them in a piece of Gorilla Tape and leave extra as a tab. This gives you something to grab and they come right up.

Liz Rivers

The Laser Outpost

For Best Paint Finishes

When using primer, make sure you use the primer that matches your paint: oil based for oil-based paints, such as spray paint, and water-based when finishing with acrylic paints.

Various Sources