Poles
The poles are made using S235JR steel and are hot galvanised in compliance with the EN40-4 standard. They are finished with a polyester powder paint coat. For poles up to 5.5 m above the ground, the terminal board slot measures 132×38 mm. For poles over 6 m above the ground, the terminal board slot measures 186×45 mm. All poles are supplied with a protective closing head, terminal board, fuse-holder (fuse not included), terminal board cover and anchoring plate for flanged poles. Poles measuring 8 m and 10 m can be constructed in two pieces to be assembled using stainless steel bolts. With 132×38 mm slot Four-pole, 3-way monoblock terminal board with in/out power supply terminal up to size 6 mm2 and branch terminal to the lamp up to size 2.5 mm2, double insulated (Class II). Disconnectable fuse-holder (fuse not included). With 186×45 mm slot Four-pole, 3-way monoblock terminal board with in/out power supply terminal up to size 16 mm2 and branch terminal to the lamp up to size 2.5 mm2, double insulated (Class II). Disconnectable fuse-holder (fuse not included). Lid for covering slot, IP43 All poles are approved for 1 street fixture in zone 7 (wind speed 29 m/s). When mounting two or more fixtures on a single pole, a stability test must be requested by contacting the Martini S.p.A. customer service.
Tapered
206
Conical
Cylindrical
Cylindrical in two parts