Best Way to Install LED Cooler Tube- LEDMyplace.com

Best Way to Install

LED Cooler Tube

www.ledmyplace.com

Best Way to Install LED Cooler Tube

L

EDMyplace will explain to you How easy it is to install an LED Cooler Tube. This tube has been specially manufactured to installed in cooler places like refrigerate, freezer, display showrooms, and many other cooler places. This product must be connected to an individual grounded branch circuit, protected by the circuit breaker or time delay fuse.

Only licensed electrician to perform this installation.

Must have Material  Two number ten self-tapping screws  Wire  Nuts, a power drill  A wire cutter pliers

www.ledmyplace.com

2

Steps to Install an LED Cooler Tube Before you start, remove the existing fluorescent lightings  Remember to switch off power prior to installation or servicing  Remove the clips and ballast of fluorescent tubes  Cut off and remove any fluorescent fixture ends  Just hold the first cap firmly while snapping off the tab with pliers  Feed the simple power leads through the pre-existing holes  Use a power drill and the self-tapping screws to mount the cooler tube  Connect the tube power leads with the existing power supply wires using a wire nut on the opposite side of the mullion  Make sure that you connect the wire in according way black wire to hot and white wire to neutral  When you’ve removed or capped off any existing unused power supply leads, You are ready to test Now you have successfully installed an extremely long life and low energy consumption.

Where can you install this Cooler Tube?  Freezer case  Display box  Under cabinet instantly www.ledmyplace.com

3

What do you get in the Delivery Box?  3 screws and nuts  3 mounting brackets  Connecting wires (If you order 3 LED Cooler Tube)

Where to Buy? LEDMyplace is the perfect place to get the perfect cooler tubes for your requirement. We have 4ft, 5ft, and 6ft tubes with the color temperature of 5000K day white light, wattage count 18W replace the 60W fluorescent tube, 32W replace the 80W fluorescent tube, and 40W replace the 100W fluorescent tube. To pre-order your fixture, visit our site LEDMyplace and get 5 years warranty with 30 days return policy.

www.ledmyplace.com

4

Thank You info@ledmyplace.com |

888-972-6211