LIQUID JEWLZ
LIQUID JEWLZ DEMI PERMANENT 100ml/33oz
• Contains Vegan Bond Complex
• 31 Colours and 1 Gloss
• No ammonia & pH 10-10.5
• No lift or base break
• No demarcation
• Blends grey up to 70%
• Intermixable collection
• 1:2 or 1:1 ratio + 1.5% Jewlz Developer
• 250ml/8oz Liquid Gloss
FLAWLESS FUSION OF NATURAL SUPERFOODS TO COLOUR AND TONE WITH SUPERIORITY
32 vegan, ammonia free, gloss demi-permanent colours and Liquid Gloss toning collection
Liquid Jewlz contains the hallmark Vegan Bond Complex, a collective blend of vegan natural superfoods protecting and conditioning hair.
Give clients the full impact of a gentle, naturally shiny, softer, vegan hair colour in just 20 minutes or less.
JEWLZ COLOUR CHART
TOP 10 REASONS WHY
1. Vegan Bond Complex
2. No lift or base break
3. Effectively adjust warmth or coolness
4. Create soft translucent coverage
5. No demarcation (gradual grow-out/fade)
6. Gentle conditioning formulation
7. Blended grey coverage (up to 70%)
8. Maintain colour for up to 6 weeks
9. Intermixable shades
10. Personalise colour results
BEFORE USE
Wear protective gloves & shake bottle well
GENERAL MIX (1:2)
1 part Liquid Jewlz + 2 parts 1.5% Jewlz Developer
TOP 6 SERVICES
Toning & pre-tone
Colour balance/fill porosity
Colour refresh
Blended grey coverage
Restore shine - Liquid Gloss
Introduction to first colour
APPLICATION TOOLS
Apply with brush and bowl
TONING & PRE-TONE
General toning application to enhance, match, tone or add dimension or pre-tone highlighted hair
• Shampoo hair and towel dry
• Mix 1 part Liquid Jewlz + 2 parts 1.5% Jewlz Developer (1:2)
• Apply zones 1, 2 & 3
• Process maximum 20 minutes (visual)
• Rinse hair and condition
APPLICATION
ZONES
Zone 1 = Regrowth
Zone 2 = Mid lengths
Zone 3 = Ends
COLOUR BALANCE/FILL POROUS HAIR
Fill and/or gentle colour deposit correction to rebalance uneven, brassy or overtoned colour.
• Follow Toning Method (steps 1 - 3)
• 5 - 10 mins prior to rinsing colour
• Spray zones 2 & 3 with All Purpose 6 in 1 and massage into hair and colour
• Rinse hair and condition
COLOUR REFRESH (ideally at week 4)
Refresh faded colour at mids and ends whilst colouring roots with Couture Silk permanent colour. Bring highlights back to life.
• Following Toning Method (steps 1 - 2)
• Apply to faded zones 2 & 3
• Process maximum 20 minutes (visual)
• Rinse hair and condition
BLENDED GREY COVERAGE
Up to 70% blended grey coverage without lifting the hair’s natural pigments.
• Follow Toning Method (steps 1 - 2)
• Apply colour to zones 1, 2 & 3
• Process maximum 30 minutes (visual)
• Rinse hair and condition
LIQUID GLOSS
• Deposit shine
• Zero pigment
• Mix with demi & permanent colours
• Dilute level/colour intensity (see table)
• Refresh mids and ends
• Help fill porous hair
• Add to any 9 or 10 level to convert to a toner shade
COLOUR : GLOSS RESULT
3 : 1 (25%) 1 level lighter
2 : 2 (50%) 2 levels lighter
1 : 3 (75%) Pastel toning
LIQUID CHROME
• Create soft silver tones
• Neutralise or enhance toneadd 10% Liquid Chrome
• For introduction to first colour, use Toning method and visually process up to 30 mins
• Increase depth - Use alternative mixing ratio 1:1.5 (1 part Liquid Jewlz + 1.5 parts Jewlz Developer)
• Not recommended to mix with Permanent colours (excluding Liquid Gloss)
• Do not use heat for any Liquid Jewlz service
• Use Leyton House Rhassoul Shampoo and Conditioners
• 8.18 is designed to neutralise unwanted copper tones at different levels
• .018T Sodalite should be used with a level darker than 10 and can also be used to mix with 8.18 to create a lighter version without losing the .18 tone
CREATE PERFECTION
• The perfect system for toning after lightening
• Create seamless blended colour melt and root stretch/root tap
COLOUR BALANCING
LOSS OF SHINE
1. Spray Rhassoul 6 in 1 Leave in Treatment from Zones 2 to 3
2. Apply Liquid Gloss (Clear) + 1.5% Jewlz Developer (1:2)
3. Process for 5-10 minutes
LOSS OF REFLECT
1. Process regrowth colour for half the development time
2. Spray Rhassoul 6 in 1 Leave in Treatment from Zones 2 to 3
3. Massage and comb through and apply colour *Zone 1 to 3
4. Process for up to 10 minutes
* Only when colour on Zone 1 is target shade for Zone 3
LOSS OF REFLECT AND DEPTH
1. Spray Rhassoul 6 in 1 Leave in Treatment from Zones 2 to 3
2. Apply corresponding Couture Silk™ colour
3. Process visually for up to 20 minutes
NOTES:
• 1 - 10 SERIES - Porous/damaged hair, process for up to 20 mins or 10 mins with gentle heat
• Artificial colour will not lighten artificial colour (except for Rouge)
• Use LH digital scales for accuracy
Couture Silk™ Permanent (1-10 series) are formulated to cover up to 70% white hair without the need to add base.
% of GREY COLOUR SELECTION
0% - 70% Select + apply target colour
70% - 100% 3 parts target colour + 1 part Natural, Natural Ash, Extra Natural or PLUS+ Series
GREY COVERAGE NATURALLY
Use 3% LH Developer UNLESS hair is coarse/resistant
NATURALS
1.0/1N - 10.0/10N - 100% blended grey coverage
NATURAL ASH
5.01/5NA - 9.01/9NA - 100% blended coverage or enhance coolness
ASH BLUE-VIOLET
6.18/6ABV - 10.18/10ABV - 100% block coverage Cool grey coverage or intense cool results add 25% - 75% to naturals, extra naturals or natural ash.
Colouring a high percentage of grey with a cool reflect colour, (.1, .2, .11, .21, .18 or .221), add 25% - 50% Natural or Extra Natural in the mix to avoid over toning and guarantee coverage
GREY COVERAGE FOR COARSE/RESISTANT HAIR
1. Mix 1:1 + 6% LH Developer
2. Increase processing up to 10 mins (no heat)
3. Pre-pigment/Pre-soften (1 part colour (1 level lighter) + 1 part water)
EXTRA NATURALS
44.0/44N - 99.0/99N - 100% block coverage with increased pigment
PLUS+ SERIES RESISTANT COOL NATURALS
44+/44N+ - 88+/88N+
Counteract underlying warm tones when covering grey. Contains a blend of green/blue undertones with green being dominant to counter red.
When covering grey hair with the resistant naturals, warm undertones may appear. To counter act this add a quarter of .1, .11, .021 or .18.
The PLUS+ series is a cooler option designed to reduce the warm tones or to give a cooler effect.
TWILIGHT SERIES (.117) ASH GREEN
Deposit only range of double ash green shades to enhance SILVER GREY reflects on white or pre-lightened hair.
1. Use on pre-lightened and toned hair (levels 9 & 10)
2. Can be used on natural white (grey) hair
3. Add to naturals for cool results when depositing 5. Neutralise unwanted warmth (levels 8 and below)
Not designed to lighten or lift
1.5% LH Developer OR MIX 1:1.5 3% LH Developer
When applied to golden hues, hair will result in a green ash tone
To prevent this occurring, neutralise unwanted warmth
High Lift 12 Series with built-in tone Capable of lifting up to 4 levels On scalp blonding designed to lighten and neutralise
High Lifts contain 3 times more toning capability than a level 10 colour
MIXING & PROCESSING
NATURAL DEPTH 7 to 9
RATIO 1:2
PROCESSING TIME
VBC COUTURE SILK HIGH LIFT 12 SERIES NATURAL DEPTH 4 to 6
20g/0.7oz High Lift
40g/1.4oz + 3% up to 9% LH Developer
35 - 55 minutes no heat
20 - 30 mins with gentle heat
NOTE: Levels 7 and above DOES NOT contain copper underlying-pigment. Can be lifted globally to create smooth blended blonde
RATIO 1:2
PROCESSING TIME
20g/0.7oz High Lift
40g/2.1oz + 6% up to 12% (depending on desire lift)
35 - 55 minutes no heat
20 - 30 mins with gentle heat
1. Ensure sufficient product is applied in fine sections
2. Lift and deposit achieved will depend on the hairs’ texture and porosity
3. Mix 1:2 for maximum toning plus lift
4. Illuminates may be added into mix by 10% for increased tonal value
COLOUR REMOVAL
1. After processing, add a small quantity of water and emulsify colour
2. Rinse until water runs clear
3. Shampoo and condition with Rhassoul
BLEND GREY WITH HIGH LIFT 12 SERIES
% of GREY MIX
Up to 50% Use desired High Lift
50 - 70% ¼ 12.0 + ¾ desired High Lift
70 - 100% High Lift not recommended
High Lift 12 Series will not cover grey, but will blend
HIGH LIFT 12 SERIES APPLICATION
VIRGIN HEAD
1. Apply to Zones 2 to 3 starting at darkest areas. Leave 2cm at roots
2. Process for half the development time
3. Apply fresh colour to Zone 1
4. Process for 35 - 55 minutes
REGROWTH
1. Apply to Zone 1
2. Process for 35 - 55 minutes
NOTE: Gentle heat can be used for bot application (20 - 30 mins)
SUPER BOOST
USE: Add 25% 12.S Boosts an 1 extra level of lift
GENERAL MIX 1:2 1.5% Jewlz Developer
VISUAL PROCESS up to 20 mins Applied to pre-lightened (Levels 9 or10)
unwanted yellow tones. Lilac effect
Use on natural depths 6 and below (except Magenta use on level 6 and above)
Use alone or blend with permanent colours
Create fresh intense vibrant fashion colour
Lifts up to 4 levels on natural or coloured hair to for vibrant long lasting reds and coppers
1. Best underlying pigment for vibrant red = depth 5 (red/orange).
2. .526 Magenta - Best used on depths 6 and above
3. Rouge can be used on coloured hair. The amount of vibrancy depends on the amount of existing colour build-up
20g/0.7oz Rouge + 20g/0.7oz LH Developer
INTENSIFY WITH .4 & .6
Add UP TO 25% to your desired Couture Silk™ Permanent colour
Using 12% developer can result in a lighter, less reflective colour
Note: Couture Silk Rouge may cause scalp and skin staining
Always conduct an AAT prior to application
COLOUR
REFRESH
OPTION 1
Mix chosen red/copper permanent colour
E.g Couture Silk 6.66 or 7.66 + 1.5% (1:2)
OPTION 2
At the basin mix equal parts Rouge + Water
Apply to Mids and Ends Process 5 - 10 mins
Couture Silk Illuminate collection of 5 concentrated pure pigment to aid in creating an endless colour palette.
Increase vibrancy or neutralise warmth.
MIXING CAPABILITIES
NOTE: If using more than 25% Illuminate, this will have an effect on grey coverage
DOWNLOAD YOUR WALL CHART
GENERAL MIX (1:2)
(1 part Blonda + 2 parts LH Developer)
(VEGAN FORMULA)
BLONDA 7
• Advanced Bond Protection
• Up to 7 levels of lift
• Gentle controlled lifting
• Clay, Pectin and Erythorbic Acid
• Dust free high performance
• Violet pigment powder
• Use with all LH & Alpine Developers
• Easy pour spout
ALPINE BLONDA 9
• Super Fast lifting up to 9 levels with clean results on all depths/ levels
• Contains Condensed Sugar Protection, soothing the persulphates
• Highly recommended for strong, resistant/coarse and dark hair types
• Contains Guar Bean and Kaolin composite to strengthen and repair
3%, 6%, 9% & 12%
Apply to dry hair only
*Do not apply to pre-shampooed hair
PROCESS
10 - 50 mins
Visually check frequently
*12% LH Developer is recommended on Levels 1 - 3 only
DO NOT MIX 1:1
ON SCALP APPLICATION IS NOT RECOMMENDED
DO NOT USE HEAT
1. Do not apply to pre-shampooed hair
2. Use non metallic bowl
3. Mix by FOLDING - DO NOT WHISK
4. Do not overlap
5. Perform a Strand Test
6. Refer to Underlying Pigment guide
Higher strengths of developer increases the speed of lift not the level of lift.
All LHP Developers will lift to the same level but at differing speeds.
Using high developer strengths should be determined by texture and resistance.
Coarser darker hair use higher volumes due to its structure, not due to the lifting goal.
ALPINE BLONDING
METHOD RATIO DEVELOPER
On Scalp 1:2 3% or 4.5% ONLY
Freehand 1:1 3%, 4.5%, 6%, 7.5% or 9%
Foiling 1:1.5 or 1:2 3%, 4.5%, 6%, 7.5% or 9%
VISUAL UP TO 50 MINS
1. Ratios vary depending (1:1 up to 1:2) depending on
a. Texture
b. Porosity
c. Existing damage
2. Fine or damaged hair: Mix 1:2 ratio (gentle and steady lift)
3. On scalp lightening use 3% or 4.5% Alpine Developer
CHARCOAL BLONDING
On Scalp 1:2 3% or 4.5% ONLY
Freehand 1:1 3%, 4.5%, 6%, 7.5% or 9%
Foiling 1:1.5 or 1:2 3%, 4.5%, 6%, 7.5% or 9%
VISUAL UP TO 50 MINS
ALPINE & CHARCOAL BLONDING CREAM VEGAN
ENRICHED WITH
• Jojoba Oil strengthens,and protects hair prone to breakage while locking in moisture
• Avocado Oil, an antioxidant promoting stronger healthier hair and protects against environmental damage
ALPINE BLONDING
SINGLE APPLICATION LIFT & TONE Up to 7 levels of lift
Gentle cream formula infused with Jojoba and avocado oils for on scalp and all lightening applications.
• 450gm economical tube with built-in blue violet tone
• 500ml blue violet pigmented 4.5% and 7.5% Alpine Developers
CHARCOAL BLONDING
SINGLE APPLICATION LIFT & NEUTRALISE Up to 8 levels of lift
Create cool neutral results infused with active charcoal. Contains Jojoba and avocado oils for on scalp and all lightening applications.
• Use with all LH 3%, 6% or 9% Developers and Alpine Developers
• Increase neutralisation use 4.5% and 7.5% Alpine Developers
When desired level of lift is achieved follow steps below
1. Rinse thoroughly lightly with luke warm water
2. Gently shampoo and condition with Rhassoul
3. Tone if required with Liquid Jewlz
* Heat not recommended for either Alpine or Charcoal Blonding
COLOUR CORRECTION WITH ALPINE BLONDA
1
2
GENTLE REMOVAL TONE ONLY
Mix 1 part Alpine Blonda 7 + 1 part 3% LH Developer + 1 part water/shampoo
Apply to darkest areas first + visually process
MAXIMUM REMOVAL DEPTH & TONE
Mix 1 part Alpine Blonda 7 + 1 part 3% LH Developer +
Apply to darkest areas first + visually process
GOING DARKER/COLOURING BACK
When going 2 or more shades darker a FILLER is required to replace the pigment that was removed when hair was lightened.
Filler + target colours can be selected from either Couture Silk™ Permanent or Liquid Jewlz depending on the hair’s texture and porosity.
FILLER METHOD
1. Spray Rhassoul 6 in 1 Leave in Treatment
2. *Apply filler to lightened areas + blow dry into hair
3. Mix and apply target colour
4. Process for full development time
1. Fragile blonde hair will benefit with using Liquid Jewlz colour
2. Use sufficient product for even results
CORRECTION WITH
SERIES
Permanent colours containing a built-in filler Create low-lights or colour back in 1 APPLICATION
4.036
ADD TO COLOUR DIRECTIONS FOR USE
Permanent Colour Service
GENERAL RATIO 1:10
WHATS IS FILLERPLEX(EBR)?
Single step Enzymatic Bond Reconstructor (EBR) with dual process action.
Plex treatment working from the OUTSIDE to INSIDE, surrounding the hair fibres with a protective webbing structure to mend broken bonds during a chemical service.
Penetrates and reconstructs disulfide bond fibres, providing elasticity and strength, even after just ONE application.
ADD TO POWDER LIGHTENER DIRECTIONS FOR USE
Alpine Blonda 7 & 9 Service
GENERAL RATIO 2:10
1gr/.03oz FillerPlex(EBR) + 10gr/.3oz colour
Example:
6gr/.2oz FillerPlex(EBR) + 60gr/2oz Couture Silk colour
Accurate measuring is key for correct usage of this product. Always measure the quantity being dispensed into the mix using Leyton House digital scales
CARE SERVICE
For added Strength & Resilience - in-between colour services.
Mix 10ml/.33oz FillerPlex(EBR) + 100ml/3.38oz water. Mix thoroughly (easier to mix and shake in the bottle)
1. Apply to dry hair section by section
2. Comb through ensuring perfect distribution of product
3. Process for 5 mins – DO NOT RINSE
4. Apply Rhassoul Hair Recovery Masque and leave in for 10 mins
5. Rinse thoroughly and shampoo with Rhassoul Colour Care (no need to condition)
2gr/.07oz FillerPlex(EBR) + 10gr/.34oz lightener
Example 8gr/.27oz FillerPlex(EBR) + 40gr/1.4oz Alpine Blonda
Average powder mixture: 25g/.084oz + 50g/1.69oz LH Developer
FillerPlex(EBR) is measured to weight of lightener only
E.g 25g/.084oz Alpine Blonda + 5g/.016oz FillerPlex(EBR) + 50g/1.69oz Developer
FILLERPLEX(EBR) & CURLY HAIR
Fills the porosity of the hair structure making it less porous, absorbs less water and less reactive to humidity. For frizz reduction
The more often used = Less Frizz
Without FillerPlex(EBR) With FillerPlex(EBR)
2 in 1
SMOOTHING MANAGEMENT
DIRECTIONS FOR USE
A gentle, high performance base solution to successfully and safely de-frizz and smooth hair.
Activated with heat, KeraCALM redefines the hair’s keratin matrix without breaking bonds, leaving hair incredibly smooth and sleek.
(Lasts up to 3 months dependant on lifestyle)
1. Wash hair twice (x2) with Rhassoul Revitalise Shampoo
2. Rinse well and towel dry (damp hair)
3. Section hair into a quadrant (4 sections)
4. Wear protective gloves and shake well
5. Pour 25ml/.85oz (medium length hair) KeraCALM into a colouring bowl
6. Use a colouring brush and start at the nape
7. *Apply KeraCALM sparingly from roots to ends
8. Comb each section to ensure even distribution
9. Process according to hair type (see Table 1)
10. Blow dry completely dry hair using a paddle brush
11. Starting at the nape use ceramic irons and pass over each section according to hair density (see Table 2)
12. Rinse hair well for minimum 5 mins with water and towel dry
13. Apply generous amount of Rhassoul Hair Recovery Masque and comb through
14. Leave in for approx 3 - 5 mins
15. Rinse and pat dry hair with a towel
16. Apply a small amount of Shimmer Oil to palm of hand and evenly distribute through hair
17. Blow dry hair to desired style and iron if needed at 180˚ / 300°F using Heat Defender.
TABLE 1
• *Too much product can make Step 10 difficult
• For both treatments, using Rhassoul paraben and sulphate free shampoo to maintain the treatments benefits for as long as possible after leaving the salon
BOTOX TREATMENT
DIRECTIONS FOR USE (Lasts 4-6 weeks dependant on lifestyle)
1. Wash hair twice (x2) with Rhassoul Revitalise Shampoo
2. Rinse well and towel dry (damp hair)
3. Section hair into a quadrant (4 sections)
4. Wear protective gloves and shake well
5. Pour 5ml/.17oz KeraCALM + 25ml/.85oz Rhassoul Hair Recovery Masque into a bowl
6. Start at the nape. Apply KeraCALM + Rhassoul Hair Recovery Masque mix from roots to ends
7. Comb each section to ensure even distribution
8. Leave to process for 20 to 30 minutes and rinse well
9. Dry and style hair as desired
2
