Cabstrut Cable Reticulation 2014

RETICULATION MANAGEMENT

o

2014 www.cabstrut.co.za

Proudly Bidvest

1

INDEX & INTRODUCTION

2-8

9-12

13

14-15

16

17-18

19

20-22

23-24

25-26

27-28

29-30

31-32

33-42

43-44

45

46-48

49-50

2-8 EUBIQ POWER TRACK 9 AL8/1, AL801 ALUMINIUM POWERSKIRTING 10 N8/1, P801 & P803 POWERSKIRTING 11 PLATINUM PVC POWERSKIRTING 12 EXECUDUCT PVC POWERSKIRTING 13 STATION MASTER UTILITY POLE & UNIMOD TOWER 14 FLOOR RETICULATION Under Screed & Access Floor 15 FLOOR RETICULATION Flush Ducting 16 WALL RETICULATION 17-18 OUTLETS & ACCESSORIES 19 ULTRA-STRUT 20 CAB-STRUT 21 CAB-STRUT CHANNELS & COMBINATIONS 22 CAB-STRUT CONCRETE INSERTS 22 CAB-STRUT DESIGN DATA 23 CAB-STRUT CANTILEVER ARMS & MANHOLE BRACKET 24 CAB-STRUT AIRCON SETS 25-26 CAB-STRUT BRACKETS 27-28 PIPE & CABLE CLAMPS 29-30 GRIPPLE HANGERS 31-32 FASTENERS & ANCHORS 33-42 CAB-CLIPS 43 CABLE TRAY Perforated Metal 44 RETURN FLANGE CABLE TRAY 45 CABLE TRAY Welded Wire Mesh 46 CL55/76 CABLE LADDER 47 POWERWAY CABLE LADDER - PW75/100 47 ANGLEWAY CABLE LADDER 47 GENERAL STRUCTURAL STEEL 48 CL130 CABLE LADDER 49-50 WIRING DUCT 51 PVC TRUNKING 51 CABLE LINE TRUNKING 52 SLOTTED PVC TRUNKING 52 PVC FLOOR (HALF MOON) TRUNKING 52 CORNICE (TRIANGULAR) TRUNKING 53 PVC & STEEL CONDUIT & FITTINGS 54 PRODUCT MASSES / LOAD CHART PARAMATERS Back Cover TECHNICAL INFORMATION & BRANCH DETAILS

IICLIPSAL

R

Crabtree 51

52

53

速

Execuduct

Trunking & Ducting Certification Approved

Voltex is a member of the Bidvest Electrical group. Bidvest brings together the industry leaders of industrial and commercial companies. www.bidvest.com BEE information can be viewed on our web site www.bidvest.com Price lists available for Cabstrut Standard Product Range. Prices for other materials and finishes on request. Alternatively for all standard product information and current list prices visit www.cabstrut.co.za.

Cabstrut reserves the right to change the design of, or discontinue any of its products. E&OE.

Electric

eubiq

THYNK Cabstrut is a division of the Voltex Group, the leading electrical wholesaler with a network of branches nationwide. www.voltex.co.za

by Schneider

IN ACCORDANCE WITH SANS 61084-1

Certificates available on request

TM

TM

2

OUTLETS ANYWHERE, ANYTIME!

EUBIQ GSS POWER TRACK (GROUNDED SENTRY SHUTTER) system

Free yourself from fixed power outlets!

Eubiq is the perfect solution for residential, retail, commercial and industrial applications End terminals fitted as standard Stock finish natural anodised Light & easy to install Clean & aesthetic Safe GSS system Modular

eubiq

TM

SFC2s Modular Track 62

27.5

actual size

Product Code

Length

SFC2 / 400 W/ET SFC2 / 600 W/ET SFC2 / 800 W/ET SFC2 / 1000 W/ET SFC2 / 1200 W/ET SFC2 / 1600 W/ET SFC2 / 1800 W/ET SFC2 / 2400 W/ET SFC2 / 3600 W/ET SFC2 / 3600 BLANK COVER

400mm 600mm 800mm 1000mm 1200mm 1600mm 1800mm 2400mm 3600mm 3600mm

Stock lengths (other lengths to order)

Blank Covers can be cut to length on order Trunking & Ducting Certification Approved IN ACCORDANCE WITH SANS 61084-1

The SFC2s Modular Track is common to SH1, DMS1, RH1/2, VSF1-MB/MC & SOHO housings featured below

VSF1-MB & MC Power & Data Housing (Mounting Base) SH1 Surface Mounting Power & Data Housing

RH1 Recess Power & Cable Management Housing

(page 4)

(page 6)

(page 7)

DMS1 Cable Management Housing

RH2 Recess Power & Data Housing

(page 5)

(page 6)

SOHO Multi Function Work Centre & Data Housing (page 7)

3

EUBIQ GSS POWER TRACK

The Complete System

High quality adaptors made of fire-retardant polycarbonate feature a raised pin which ensures use in primary power circuits only.

CLASSIC ADAPTOR RANGE 13A

15A

Dedicated power adaptors suit secondary power circuits only.

15A Dedicated

Secondary power circuits feature a plastic beading preventing primary adaptors from being used.

Live Core

eubiq 15A

TM

Grounded Sentry Shutter

PREMIUM ADAPTOR RANGE Available in standard and dedicated outlets. (as shown above) 15A stock, others to order.

15A 2 Pin

Surge Protector

USB Charger

Entire body is grounded

Neutral Core

Ultra Safe!

Patented GSS™ (Grounded Sentry Shutter) system is one of the safest systems in the world.

Standard Accessories A Complete Range of Multimedia Connectors is Available For use with SFC2 based tracks

DS3 Data/Tel Holder (Flush) Not suitable for SH1

DS4 Data/Tel Holder (Proud)

PLT 15A Plugtop Fused 13A

NS007 CAT 5E Jack RJ45 (Data or Telephone) CAT6 UTP Data

TR50-MS Motion Sensor Light Holder

TR50-TS Toggle Switch Light Holder

NS006 CF Lamp supplied separately

NS006 CF Lamp supplied separately

CCS-13 Coiled Cordset Kettle

CCS-7 Coiled Cordset Figure 8

CCS-7 Coiled Cordset Mickey Mouse

4

EUBIQ SH1 HOUSING

Free yourself from fixed power outlets!

Durable Premium finishing EMI shielded Built-in accessory rail Dado mid-height mounting Snap-on multimedia connectors Precise alignment of trunking runs with corner links Uninterrupted Power Supply (UPS) ready

29

SH1 with SFC2 Track Standard Finishing: NSB Natural Shot Blast Maximum Length: 3600mm

100

eubiq

Screw on Mounting

TM

For Adaptors see page 3 Skirting

Wall Mount

SH1 with DS4 Data Holder DS3 Data Holder is not suitable for SH1

SH1 with SFC2 Blank Cover

Recessed Track accepts towel rail and hooks (See page 8) DS4 Data Housing

5

EUBIQ DMS1 HOUSING

Free yourself from fixed power outlets!

Light & easy to install Clean & aesthetic Safe GSS system Modular

40

Configuration A

(Configuration A)

Configuration B

SFC2 Power Track

Power Cables

Data Cables

DS3 or DS4 Data Housing

150

(Configuration B)

SFC2 Power Track

Power Cables

SFC2 Blank Cover DS3 Data Housing

SFC2 Power Track

DS4 Data Housing

DMS1 Housing Track Retainer Insert & Rotate to install. Retainers clip together in pairs or more

eubiq

DMS1/SH1 Corner Cap Installation

1

2

3

For Adaptors see page 3 Typical Housing Installation (DMS1 shown)

Insert Snap on Cap Retainer Clips top and bottom

Snap on Cap. Fit only after wiring is complete

SFC2 Power Track (Primary Power Circuit)

SFC2 Power Track (Primary Power Circuit)

Track Retainer

Internal Corner Cap SFC2 Power Track (Secondary Power Circuit)

External Corner Cap

Blank Cover

TM

6

EUBIQ RH1 & RH2 HOUSING (RECESSED DATA, POWER & CABLE MANAGEMENT)

Free yourself from fixed power outlets!

SFC2s Modular Track (Supplied separately) see page 2

Installation can be done on table with a minimum thickness of 15mm

SFC2s Modular Track (Supplied separately) see page 2

INTEGRATED POWER & DATA SOLUTION Designed with the GSS System Power Track, the RH series is the perfect solution for recessed power and data requirements.

Manufactured from natural anodised aluminium with polycarbonate accessories Power track and data outlets can be configured in any combination and length to suit customer requirements

The product is designed for easy installation, thus saving time and labour cost.

Maximum standard length 3600mm

RH2 RH1 80

80

34

57

RH1 End Caps (Pair)

For Adaptors see page 3

EUBIQ V3 MINI TOWER (FIXED OR MOBILE ISLAND RETICULATION) Durable Premium finishing EMI shielded Triple compartments Snap-on multimedia connectors Uninterrupted Power Supply (UPS) ready Compatible with all GSS System Adaptors & Accessories For outlets see page 3 Standard Finishing: NSB Natural Shot Blast Maximum Length: 3600mm

EUBIQ ELEPOD (MOBILE OR DESKTOP RETICULATION) Plug and Play Premium finishing Ultra Slim Free Standing Built-in Surge Protector Up to 7 outlets Pre-packed kit includes: 1 x SC2 Power Track (Pre-wired with 3m Cable) 1 x Desktop Stand 1 x Stand 2 x Adhesive Tapes 6 x Anti-skid Pads 3 x 3pin 15A Classic Adaptors (Grey) Length: 600mm

Base Diameter: 240mm Weight: Estimated 7.1kg

Free Standing On Floor

650mm

Available in standard length: 650mm

Suitable for Desktop installation

240mm

elepod

7

EUBIQ VSF1 DESKTOP MODULES (POWER & DATA TRACKS WITH CLAMP OR BASE MOUNTING) VSF1-MB Base Mounting POWER & DATA TRACK

Free yourself from fixed power outlets!

Pre-assembled with SFC2 power track, data holders (x2 DS3) and 2m power cord Compatible with GSS adaptors and accessories (not included) 800 and 1000mm kits available standard stock Special lengths to order Natural Anodised finish

eubiq VSF1-MC Clamp Mounting POWER & DATA TRACK

TM

For Adaptors see page 3

EUBIQ SOHO DESKTOP MODULES (POWER & DATA TRACK WITH CLAMP MOUNTING)

Free yourself from fixed power outlets!

Wall Mount

1. Accessory Tray: Clears all clutter from the workspace 2. Cable Reel: Keep cables in place

1

Desk Clamp

SOHO is available in 1000, 1500, 1800 and 2000mm Retail Packs.

Adaptors are not included (See page 3).

90째 angle Desk clamp

Accessory Tray 2

Table thickness: 10-55mm

Cable Reel

140mm

Standard Accessories

30mm

8

EUBIQ RETAIL KIT (POWER TRACK WITH ACCESSORY RAIL)

Free yourself from fixed power outlets!

Designed for use in any kitchen or household Compatible with GSS accessories 1000 and 1500mm tracks in stock, up to 3600mm to order Natural Anodised finish Easy to install Retail Kits 600 and 1000mm Retail Kits supplied with track, 2 x 15A and 1 x 5A adaptors, wall plugs and screws, 400mm kitchen rail and 2 x hooks

Recessed Track accepts towel rail and hooks

CABINET

Min 18mm

For additional Adaptors see page 3

27

71

Standard Accessories KH Kitchen Hook (set of 4)

Kitchen Rails KH/400 (400mm) KH/600 (600mm)

46

Min 40mm

WORKTOP

9

AL8/1, AL801 ALUMINIUM POWERSKIRTING Suitable for office environments and light industrial applications LIGHTWEIGHT! Aluminium Power Skirting is extremely light making it easy to handle and install whilst remaining strong & rigid!

3000mm standard length AL8/1 covers supplied separately & fixed with blue SEZ clips at 400mm centres Powerskirting can be used as 1, 2, 3 or multiple tiers

Utilises standard outlets (available for all standard single & double accessories Aesthetic textured powder coating in standard or special colours (to order) Optional clip-in divider available for all compartments

Aesthetic textured powder coating options Trunking & Ducting Certification Approved

Motor Craft Grey

IN ACCORDANCE WITH SANS 61084-1

Standard Steel Accessories

Carrier Beige

Hammertone Grey

White

Easter Oak

Hospital Grey

Accessories shown are for Series P801. Internal elbows not required.

Accessories for N8/1 & N8/3 are also available For weights and ordering information see page 56

Splice pieces for powerskirting body supplied separately External Elbow

Purpose mitre cut aluminium bodies to form accessories manufactured to order

Internal Elbow/ Standard Tee

End Cap

Flat Elbow

Flat Tee

Duct Divider (31 x 21 x 3000mm)

Outlet Cover Kits - Order Cradle Separately No More Pulling through of cables .

All internal and external elbows are fitted AFTER the wiring is complete!

A comprehensive range of outlets and accessories are available

Crabtree Classic 15A 13A 2 x 13A 1 Lever 2 Lever

15A 13A

Modular Diamond & Thynk 50 x 50 50 x 75

2 Lever

Blank

Clipsal

Veti SSO 3 Module

For product masses see page 54

Standard Body Configurations

Double Stacked AL8/1 = AL801 Splice pieces for bodies supplied separately For weights and ordering information see page 56

UNIVERSAL FLUSH OUTLET KIT AL8/1 Duct

AL801 Duct

AL8/1 + AL801 = AL8/3

57 x 82.5 x 3000mm

57 x 165 x 3000mm

57 x 247.5 x 3000mm

Readily available outlets and accessories in various design options are simply clipped in place before colour matched cover plates are screwed on. See pages 17-18

10

N8/1, P801 & P803 POWERSKIRTING Suitable for office environments and light industrial applications Floor level or dado rail installation Distribute power and data simultaneously in dedicated channels

3000mm standard length Texture powder coated galvanised steel is RUST PROOF and available in a range of six attractive colours Covers, Elbows, Tees and End Caps are colour matched for a professional finish A comprehensive range of outlets and accessories are available Separate services with drop in Duct Dividers Rivet assembly (TOX) - no spot welding for straighter lines and more accurate installation

RUST FREE!

Aesthetic textured powder coating options

Motor Craft Grey

Carrier Beige

White

Hammertone Grey

Easter Oak

Hospital Grey

Standard Accessories

Series 8 Powerskirting is manufactured from Z275 galvanised steel, epoxy powder coated on visible surfaces only.

Accessories shown are for Series N8/P801. Accessories for N8/1 & N8/P803 are also available.

External Elbow

Internal Elbow/ Standard Tee

End Cap

Flat Elbow

Flat Tee

Duct Divider (3000mm)

Outlet Cover Kits - Order Cradle Separately

No More Pulling through of cables .

All internal and external elbows are fitted AFTER the wiring is complete!

A comprehensive range of outlets and accessories are available

Crabtree Classic 15A 13A 2 x 13A 1 Lever 2 Lever

15A 13A

Modular Diamond & Thynk 50 x 50 50 x 75

2 Lever

Blank

Clipsal

Veti SSO 3 Module

For product masses see page 54

Standard Body Configurations (N8/1 can be double stacked) For weights and ordering information see page 56

Trunking & Ducting Certification Approved IN ACCORDANCE WITH SANS 61084-1

N8/1 Body

N8/P801 Body

(Loose Splice) 55 x 82,5 x 3000mm

(Fixed Splice) 55 x 165 x 3000mm

N8/P803 Body (Fixed Splice) 55 x 244 x 3000mm

Readily available outlets and accessories in various design options are simply clipped in place before colour matched cover plates are screwed on. See pages 17-18

11

PLATINUM PVC POWERSKIRTING Suitable for office environments and light industrial applications.

LIGHTWEIGHT & EASY TO INSTALL! PLATINUM 2 SERIES PVC Power Skirting with features seen in European systems.

Strong, light and rigid making it easy to install.

3000mm standard length.

PLATINUM 2 SERIES PVC Power Skirting is cost efficient and practical.

Pre-punched at 260mm centres for easy installation.

EP202) Duct

Clean, aesthetic lines available in white, grey or black offer low maintenance and are able to withstand minor impact without denting or chipping.

55 x 160 x 3000mm C/W Covers

Full installation instructions are supplied with PLATINUM 2 SERIES PVC Power Skirting.

55

POZI-LOCK COVER (Top & Bottom Locking System)

Standard colours:

Grey

White

Installation of Covers

Black

Starting at one end, firmly press cover into place working along the entire length.

52

160

Standard Accessories A complete range of colour matched accessories are available for a professional finish.

Push accessories firmly onto duct cover and fit from the front after wiring. Permanent fixing with PVC weld can be used if required.

EP202 Duct 55 x 160 x 3000mm C/W Covers

Pre-punched at 260mm centres for easy installation

EPIB2 Internal Elbow

EPEB2 External Elbow

Outlet Cover Kits - Supplied with Cradle & Screws

Crabtree Classic 15A 2 Lever

Clipsal

Modular

15A 2 Lever

50 x 50 50 x 75 Blank

Legrand Mosaic 2 Module 3 Module

EPEC2 Universal End Cap

EPCJ2 Cover Joining Clip

Generic PVC Cradle

EPFB2 Flat Elbow

EPFT2 Flat Tee

Platinum duct is supplied with protective tape on all covers and top side.

Outlet or accessory on appropriate cradle

Retaining Screws A comprehensive range of outlets and accessories is available.

Matching Cover Plate

See pages 17-18

12

速

Execuduct

EXECUDUCT PVC POWERSKIRTING Suitable for office environments and light industrial applications.

LIGHTWEIGHT & EASY TO INSTALL! EXECUDUCT PVC Power Skirting is extremely light making it easy to handle and install whilst remaining strong & rigid!

3000mm standard length.

EXECUDUCT PVC Power Skirting is cost efficient and practical.

Clean, aesthetic lines available in grey, white, black or sand offer low maintenance and able to withstand minor impact without denting or chipping.

Standard colours: EXE3 Duct

55

55 x 214 x 3000mm C/W Covers

Grey

White

Black

Sand

POZI-LOCK COVER (Top & Bottom Locking System)

EXE3 is not available in black

55

50

EXECUDUCT PVC Power Skirting is supplied with protective tape on all covers and top side.

52 50

214

40 165

50

52

52

100

Standard Accessories A complete range of colour matched accessories are available for a professional finish.

EXE2 Duct

Duct Divider

55 x 165 x 3000mm C/W Covers

EXE1 Duct 40 x 100 x 3000mm C/W Cover

Outlet Cover Kits - Supplied with Cradle & Screws

Crabtree Classic 15A 2 Lever 13A

Clipsal

Modular

15A 2 Lever

50 x 50 50 x 75 Blank

Legrand Mosaic 2 Module 3 Module

End Cap

Int/Ext Bend

Cover Joint

Flat Tee Flat Elbow NB: Flat Tee & Flat Bend are fabricated

Note: Different cradles suit 1 & 2 or 3 tier ducts.

1 & 2 Compartment Cradle

PVC Cradle Outlet or accessory on appropriate cradle

3 Compartment Cradle

51

49

Retaining Screws

Matching Cover Plate

A comprehensive range of outlets and accessories is available.

See pages 17-18

13

STATION MASTER UTILITY POLE & UNIMOD TOWER STATION MASTER

Standard Pole Kit

3000, 3500, 4000 and 4500mm standard lengths 57mm diameter, 4 compartment

Pole with Covers

Pole kit comprises: Pole, PVC covers, base plate, ceiling flange and jack assembly

Ceiling Flange

UNIMOD TOWER 4, 8 or 12 outlets Installs on a standard floor duct outlet, conduit floor box or stand-alone steel base unit (supplied separately)

Base Plate

Jack Assembly

Modules stack 2, 3 or more high

600mm high

CLIP-ON KIT!

Eliminates the need for screws and cover plates.

Quicker and easier to install!

Other heights manufactured to order

Unimod Outlet Kit One kit fits Poles & Towers Accepts all modular accessories Modules can be stacked Kit contains body, universal cradle, two plastic end covers & divider Old style non-modular (traditional) kits also available

Readily available outlets and accessories are available. See pages 17-18 For product masses see page 54

Standard Accessories

For Conduit Box See Page 15

Pole Cover Kits Cradle Classic 15A 13A 2 x 13A 1 Lever 2 Lever

Clipsal 15A 13A

Modular 50 x 50 50 x 75

2 Lever

Blank

Veti SSO 3 Module

Traditional Outlet Kit

Unimod Outlet Kit

Unimod Blank Outlet Kit Pre-etched to breakout for most accessories

14

FLOOR RETICULATION UNDER SCREED DUCTING SYSTEM (Sub-surface Outlets Protected from Damage)

ACCESS FLOOR/CONDUIT BOX SYSTEM (Sub-surface Outlets Protected from Damage)

3000mm standard length

System fits into access floor tile

Breakout outlet points at 500mm centres

Can also fit onto conduit floor box cast into the floor and fed by conduit

Duct installed 35mm below surface level

(208 x 288mm aperture)

Overall depth 75mm minimum Galvanised (PG) 1,2mm construction PVC Carpet Frame & Lid 200 x 300mm

Alternative installation method available on request

DUCT OUTLET KIT COMPRISING:

CONDUIT BOX OUTLET KIT COMPRISING:

Disposable Concrete Ingress Prevention Plate

Disposable Concrete Ingress Prevention Plate

Screed Frame

Conduit Box

Modular Outlet Plates

Modular Outlet Plates

Fit Duct Outlet Kit to Duct prior to screeding of Floor Duct

3UAA Duct

220 x 350mm Deep

Conduit Access Floor Box 205 x 287 x 79 or 100mm Deep

79/100 287

Trunking & Ducting Certification Approved IN ACCORDANCE WITH SANS 61084-1

For product masses see page 54

Standard Accessories

External Splice (For cut lengths)

Internal Splice (For standard lengths)

3UA Universal Drawbox 300 x 300 x 65mm

Universal Modular Outlet Plate Order outlets separately.

Modular outlets and accessories make this system user friendly Module combinations are totally flexible Manufactured from high impact PVC Flush lid features twin, flip-up cable outlet ports Lid is recessed to accept carpet or tile Readily available outlets and accessories are available.

See pages 17-18

15

FLOOR RETICULATION 3F FLOOR DUCT - FLUSH DUCTING WITH SURFACE MOUNTED OUTLET PEDESTALS 3000mm standard length Removable outlet covers at 1000mm centres Galvanised (PG) 2mm top and 1mm base 31mm installation depth FD2, FD3 & FD4 pedestals can be fitted

31 75

65

Trunking & Ducting Certification Approved

75

FLOOR BOXES Order boxes, pedestals, covers and outlets separately

IN ACCORDANCE WITH SANS 61084-1

POP-UP PEDESTAL

FD3 Pedestal

Brushed aluminium finish 150 x 150mm base frame

230 x 140 x 75mm

Standard Modular Outlet 75 x 50mm

FD2 Pedestal

140 x 150 x 75mm

FD3/4 Pedestal Conduit Box FD2 Pedestal Conduit Box

Ingress Prevention Plate

117 x 210 x 38mm

Modular outlets and accessories make this system user friendly.

117 x 135 x 38mm

FD4 Pedestal

150 x 255 x 75mm

Pedestal Cover Kits - Order Cradle Separately

Crabtree Classic 15A 13A 2 x 13A 1 Lever 2 Lever

Conduit Box

Clipsal

Modular

Veti

15A 13A

50 x 50 50 x 75

Not Available

2 Lever

Blank

115 x 115mm

Support Bracket For product masses see page 54

Readily available outlets and accessories are available.

See pages 17-18

Standard Accessories

External Splice (For cut lengths)

Internal Splice (For standard lengths)

3F Universal Drawbox 300 x 300 x 65mm

Power Skirting Connector

16

WALL RETICULATION Suitable for power, voice & data outlets Fit from front clip-on PVC covers Boxes suitable for single or double sided use Order boxes, cradles, covers & outlets separately

Wall Box

(for dry or brick walls)

275mm

Surface Mounted Outlet

(PVC, Steel or Epoxy Coated) with 6 or 9 Way Outlet Plates 157mm

2 Tier Option

62/88mm

9 Way Outlet Plate

275mm

Locating Tabs

66mm

Wall Box

Universal Floating Cradle

For Modular Outlets & Accessories see pages 17-18

For product masses see page 54

17

OUTLETS & ACCESSORIES

IICLIPSAL

R

by Schneider

Electric

Crabtree

Crabtree

CLASSIC

DIAMOND

Cradle 11000

15A SSO 6896H

16A SSO LS 2002

Suitable for all Blank Covers 15A Dedicated SSO 6896HD (RED) (Blue & Black also available)

16A Dedicated SSO LS 2003 (RED) LS 2013 (BLUE) LS 2015 (BLACK)

S2015PS/13 13A SSO

13A SSO 4556H

16A SO 11915

16A 1 Way Switch 11901/WH

16A Dedicated SO 11451/RED (RED) (Blue & Black also available)

20A 1 Way Switch (Red)* 11901/RED

20A 1 Way Switch + LED 11981/WHI

Blank Cover Plate 11900

13A Double SSO 4555T

Universal Twin Cradle LS 1005

2 Pole 20 Amp Isolator

*(Blue & Black also available)

Cord Grip + Clamp

Universal Cradle 0412

Cradle 11000

Not to be used for Blank Covers 16A S/P Switch

Telephone Socket RJ11**

16A S/P Dedicated Switch

20A DPI 2460

Data Socket RJ45**

**RJ11 & RJ45 available as shuttered or open (CAT5E shown, CAT6 available to order)

Int. Adaptor SO 11916

13A SO 11940

5A Socket + Cradle 1430

Standard 15A Plug Top

Euro Socket 11850

Cord Outlet 2435

20A DPI 11904/WH

Cord Outlet 11906

T.V. 11992

Satellite 11996

5A Outlet 1435

Dedicated 15A Plug Tops (RED), (BLUE), (BLACK) Data RJ45 CAT6 Shuttered 11894

Telephone Shuttered 11815

5A Plug Tops also available

Matching Cover Plates for all Powerskirting & Duct are readily available

Facsimile Shuttered 11814

OUTLETS & ACCESSORIES

THYNK

TM

3 Mod Cradle i0005806

MODULAR

3 Mod. Cradle THK006C 16A SO i0005843

Single Blank i0005851

Double Blank i0005852

16A SSO THK001A

16A Dedicated SSO (Red)* THK002A

Suitable for all Blank Covers 16A Ded. SO (Red)* i0005844

16A 1 Way Switch i0005856

18

16A 1 Way Switch + Locator i0005858

16A 1 Way Switch + Indicator i0005861

16A 1 Way Switch (Red)* i0005857

Data Mod. (White) THK004D1 (Red, Blue & Black also available) 16A SO 16A Ded. SO (Red)* THK001AS THK002AS *(Blue & Black also available)

THK005EU Euro Socket

THK001B 13A SO

*(Blue & Black also available)

3 Mod Cradle i0005806

16A Schuko Type i0005847

16A Switch Mod. (White) THK-SW16A/W (Red, Blue & Black also available)

3 Mod. Cradle THK006C Blank Plug THK004DBL

Euro Socket i0005848 13A SO i0005846

6A SO i0005845

3 Mod. Data Cover (White) THK004D 2 Pole 20 Amp Isolator THK-SW20A

3 Mod Cradle i0005806

1 Mod. 20A DPI i0005854

Cord Grip + Clamp THK004DCG

Telephone Shuttered THK004KC3

Data RJ45 CAT5 Shuttered THK004KC5

Data RJ45 CAT6 Shuttered THK004KC6

Cord Outlet i0005853

PANEL SOCKETS

5A Outlet THK-6R

16A SO

16A Ded. SO (Red)*

Euro Socket

IEC 10A Adaptor

2 Mod. 20A DPI i0005855

Telephone Shuttered i0005849

Data RJ45 CAT6 Shuttered i0005850

5A Outlet THK-6S-5C

*(Blue & Black also available)

Matching Cover Plates for all Powerskirting & Duct are readily available

19

ULTRA-STRUT METAL FRAMING

The 2.5mm Industry Standard is now 20% Stronger and 40% Lighter

NEW!

A direct replacement in every way It may look different because of the UltraSTEEL™ process, but UltraSTRUT™ is a direct replacement for BS compliant 41x41 and 41x21 strut channel sections in 2.5mm It is light duty and fits all existing ancillary components Being lighter, it's easier to handle, lift and transport, so it helps reduce installation costs.

We provide plain, and slotted configurations in hot dip galvanised material, so there’s a strut for all your applications All this means, that when selecting UltraSTRUT™ you will require less steel for the same performance, which is good for you and good for the environment.

BS6946: 1988 compliant Fits all existing ancillary components Available in these configurations:

UL1000 41 x 41 UL1000T41 x 41 Slotted UL3300 41 x 21 UL3300T 41 x 21 Slotted Standard length 5800mm Slot size 14 x 25 at 50mm pitch Ultra-strut standard finish is Plain, Pre-Galv & Hot Dip Galvanised

Trunking & Ducting Certification Approved IN ACCORDANCE WITH SANS 61084-1

The result is you get MORE for your MONEY! SAFE LOADS

CHANNEL NUTS

41 x 41 UNIFORMLY DISTRIBUTED LOAD 41 x 41 PLAIN

41 x 41 SLOTTED

SPAN MM

KG

KG

500

941.6

876.6

1000

470.8

438.3

1500

313.9

292.2

2000

235.4

219.2

2500

188.3

175.3

3000

156.9

146.1

41 x 21 UNIFORMLY DISTRIBUTED LOAD 41 x 21 PLAIN

41 x 21 SLOTTED

SPAN MM

KG

KG

500

346.8

323.0

1000

173.4

161.5

1500

115.6

107.7

2000

86.7

80.8

2500

69.4

64.6

3000

57.8

53.8

AVAILABLE WITH OR WITHOUT SPRINGS

Cab-Strut nuts for P1000 & P2000 CSN106/M6 CSN110/M10

CSN108/M8 CSN112/M12

P1000 Resistance to slip 350 Kg Pull out strength 700 Kg SAFETY FACTOR: 2

P2000 340 Kg 520 Kg

Spring nut is inserted anywhere along continuous slot. Rounded nut ends permit easy insertion.

A 90 degree turn positions the serrated grooves in the nut with the clamping ridges of the channel.

The fitting makes the connection between any framing channels or as means for other attachments.

Tightening by a wrench, locks the serrated teeth of the nut into the clamping ridge of the channel to make the strong, vice-like connection.

Cab-Strut nuts for P4000 CSN406/M6 CSN408/M8 CSN410/M10 CSN412/M12 P3300 Resistance to slip 350 Kg Pull out strength 500 Kg SAFETY FACTOR: 2 For product masses see page 54

P4000 340 Kg 480 Kg

20

CAB-STRUT SUPPORT SYSTEMS

CAB-STRUT Systems Go Anywhere!

Cab-Strut is a rigid metal construction system which is a time and money saving alternative to conventional support methods. ! No Welding ! No Drilling ! 100% Adjustable ! 100% Reusable

Spring nut is inserted anywhere along continuous slot. Rounded nut ends permit easy insertion.

A 90 degree turn positions the serrated grooves in the nut with the clamping ridges of the channel.

The fitting makes the connection between any framing channels or as means for other attachments.

Tightening by a wrench, locks the serrated teeth of the nut into the clamping ridge of the channel to make the strong, vice-like connection.

Trunking & Ducting Certification Approved IN ACCORDANCE WITH SANS 61084-1

Unique "Weldless" Connection Hex-head bolt connects fitting to channel as it is threaded into spring nut Chamfer in the nut eases starting of the bolt.

Nut teeth create a strong, vice-like grip when tightened against the inturned channel edges Channel edges and the nut's tapered grooves act as guides to provide fool-proof alignment of connection Nut teeth grip the channel's inturned edges, tying the channel sides together in a "box" configuration for added strength Spring allows precision placement anywhere along the channel length, then holds the nut in position while the connection is completed

CHANNEL NUTS

AVAILABLE WITH OR WITHOUT SPRINGS

Cab-Strut nuts for P1000 & P2000 CSN106/M6 CSN110/M10

CSN108/M8 CSN112/M12

P1000 Resistance to slip 350 Kg Pull out strength 700 Kg SAFETY FACTOR: 2

P2000 340 Kg 520 Kg

Cab-Strut nuts for P4000 CSN406/M6 CSN408/M8 CSN410/M10 CSN412/M12 P3300 Resistance to slip 350 Kg Pull out strength 500 Kg SAFETY FACTOR: 2 For product masses see page 54

P4000 340 Kg 480 Kg

21

CAB-STRUT CHANNELS & COMBINATIONS

41

10

41 10

10

7 41

18

10

10 10

7

7

41

41

41

18

19

21

41

10

7

10

P1000 Thickness 2,5mm.

Standard length: 5000mm.

P1000T Thickness 2,5mm.

Standard length: 5000mm.

Slot size 28 x 14mm @ 50mm centres.

Standard finish: Galvanised (PG). P1000 & P 3300 are also available in hot dipped galvanised (HDG). P1000 is available in Stainless Steel 304L, 316L & 3CR12 corrosion resistant steel all 2mm thick.

For part numbers of P2000 combination channels replace the P1 with P2.

E.g. P1001 becomes P2001.

10 21

8

P3300

P2000 Thickness 1,0 and 1,5mm.

Standard length: 5000mm.

Thickness 2,5mm.

Standard length: 5000mm.

P1001-A

P1001-B

P1001-D

P1001-3

P1001-A3

P1001-B3

P1001-C

P1001-C3

P1001-C31

P1001-C32

P1001-C33

P1001-C4

P1001-C41

P1001-C42

P1001-C43

(70mm wide)

P1001-D3

P4002-1

(93mm wide)

P1004-A (124mm deep)

P4002-2

(70mm wide)

P1004

P1003

P1002

(100mm wide 43mm deep)

(93mm wide)

P4001

P4003

P4004

For product masses see page 54

9

Thickness 1,5mm.

Standard length: 5000mm.

P3300T (slotted) is also available.

(93mm wide)

7

10

P4000

P1001

P1003-1

41

22

CAB-STRUT CONCRETE INSERTS

Cab-Strut concrete inserts offer a practical solution for

the provision of mechanical fastening into concrete walls and ceilings.

LOAD DATA - Recommended loading on inserts in average good concrete, with a safety factor of two, is as follows:

s tre en c 00 t1 a gs Lu 41

41

21

P32/75 - 225kg P32/100 - 360kg P32/150 - 450kg P32/200 - 460kg P32/300 to P32/5000 580kg per 300mm length.

79 41

P33/75 - 225kg P33/100 - 275kg P33/150 - 350kg P33/200 - 410kg P33/300 to P32/5000 460kg per 300mm length.

1750

2000

2250

2500

2750

3000

COLUMN LOAD AT SLOT FACE S.F. 1,6

1216 844 745 559 1202 835 720 542 1170 812 657 499 1102 756 559 428 1006 670 463 354 912 585 — —

MAXIMUM LOADING OF COLUMN (Kg) S.F. 1,6

4268 2714 2857 1872 4105 2622 2523 1686 3755 2410 1894 1336 3131 1976 1258 924 2467 1480 856 637 1970 1121 — —

UDL (Kg) WHEN DEFLECTION EQUALS SPAN 1/360

— — — — — — — — — — — 94 71 — 222 55 40 142 33 25 142 98 23 17

UDL (Kg) WHEN DEFLECTION EQUALS SPAN 1/200

— — — — — — — — — — — — — — 95 70 — — 61 46 — — 42 32

DEFLECTION AT WORKING STRESS (mm)

0,17 0,2 0,33 0,33 0,83 0,7 1,3 1,3 1,54 1,6 3,0 3,0 2,1 2,8 5,2 5,3 4,3 4,3 8,1 8,2 6,2 6,3 11,7 12,0

UDL (Kg) AT WORKING STRESS 125 n/MM²

1264 899 395 305 632 446 197 152 421 297 131 101 316 224 98 76 252 178 79 61 210 148 65 50

PRODUCT

P 1000 P 2000 P 3300 P 4000 P 1000 P 2000 P 3300 P 4000 P 1000 P 2000 P 3300 P 4000 P 1000 P 2000 P 3300 P 4000 P 1000 P 2000 P 3300 P 4000 P 1000 P 2000 P 3300 P 4000

BEAM SPAN OR COLUMN UNSUPPORTED HEIGHT (mm)

COLUMN LOAD AT SLOT FACE S.F. 1,6

1500

MAXIMUM LOADING OF COLUMN (Kg) S.F. 1,6

1250

UDL (Kg) WHEN DEFLECTION EQUALS SPAN 1/360

1000

UDL (Kg) WHEN DEFLECTION EQUALS SPAN 1/200

750

DEFLECTION AT WORKING STRESS (mm)

500

UDL (Kg) AT WORKING STRESS 125 n/MM²

250

PRODUCT

BEAM SPAN OR COLUMN UNSUPPORTED HEIGHT (mm)

CAB-STRUT DESIGN DATA

P 1000 P 2000 P 3300 P 4000 P 1000 P 2000 P 3300 P 4000 P 1000 P 2000 P 3300 P 4000 P 1000 P 2000 P 3300 P 4000 P 1000 P 2000 P 3300 P 4000 P 1000 P 2000 P 3300 P 4000

180 127 56 43 158 111 49 38 140 99 44 33 126 89 39 30 114 81 35 27 105 74 32 25

8.4 8.6 15.9 16.2 11.0 11.2 20.8 21.2 13.8 14.2 26.2 26.7 17.1 17.5 32.3 33.0 20.7 21.1 39,0 40.0 34.6 25.2 46.5 47.0

— — 31 23 144 100 20 18 114 79 18 — 92 64 15 — 76 52 12 — 64 44 10 —

104 72 17 13 80 55 14 10 63 44 10 — 37 35 8 — 42 29 7 — 35 24 5 —

1620 880 — — 1365 716 — — 1172 599 — — 1021 512 — — — — — — — — — —

829 512 — — 757 452 — — 694 402 — — 638 361 — — — — — — — — — —

23

CAB-STRUT CANTILEVER ARMS

Standard finish galvanised (HDG)

For arms with channel inverted add 'A' to part Number. E.g.

WAA150A.

Channel used is Cab-Strut P1000 Econo-Arm is Cab-Strut P2000 slotted

NOTE: Cantilever Arms should be 50mm longer than the width of the cable tray to be supported

Used for supporting cable tray, ladder and many other applications

For product masses see page 54

* 100, 500 & 800 are Non-Stock Items

40

1 89mm Wrap Around (223 Series) Part Number

Length

Design Load (kg)

WAA150 WAA200 WAA250 WAA350

150 200 250 350

315 310 280 260

14Ø

89

1

2 135mm Wrap Around (223 Series) Part Number

Length

Design Load (kg)

WAA450 WAA550 WAA650

450 550 650

245 200 160

40 40

14Ø

135

3 A Flat Plate Arm (254 Series) Part Number

Length

Design Load (kg)

FPA150 FPA200 FPA250 FPA350 FPA450 FPA550 FPA650

150 200 250 350 450 550 650

290 280 260 240 180 155 130

2

159

14Ø 6

3 A+B

40

3 B Flat Plate P2000 Econo-arm Part Number

Length

Design Load (kg)

FPA/P2/450 FPA/P2/600

450 600

130 110

14Ø 159 40

4 Half Double (254 Series) Part Number

Length

Design Load (kg)

HDA0550 HDA0650 HDA0850 HDA1050

550 650 850 1050

240 200 160 130

159

5 Full Double (254 Series) Part Number

Length

Design Load (kg)

FDA0550 FDA0650 FDA0850 FDA1050

550 650 850 1050

460 310 180 150

6 Tray Arms (249 Series)

8

152 229 305 381 457 610

49 70 87 108 126 164

x1 x2 x3 x4 x5 x7

914 Manhole Bracket Standard finish Galvanised (HDG)

160 148 136 124 112 100

5

14Ø

11Ø

Part Number A mm B mm C 76 mm Design Load (kg) Old Part Number TA150 TA229 TA305 TA381 TA457 TA610

4

8

P2491 P2492 P2494 P2495 P2497 P2500

B

6

C A 7 x 33

24

CAB-STRUT AIRCON SETS

NEW!

Available in 450, 550, 600 & 650 lengths

HARDWARE SUPPLIED WITH EACH KIT

Available in HDG or EPC (Beige only) Sets comprise 2 x slotted cantilever arms, 2 x back channels and all fixing hardware

HEX SET SCREW x 4

SHIELD ANCHORS x 4

For product masses see page 54 SPRING NUT x 4

HDG CODE

450mm I0005863

550mm I0005864

600mm I0005865

650mm I0005866

DESCRIPTION

SET COMPRISES

QTY/SET

Aircon Set 450mm Slotted Cantilever Arm HDG Complete

Slotted C/L Arms (FPA type) 450mm Length x 1.6mm (P2000 Arm) Back Plate : 150mm x 45mm x 6mm - HDG Backing Channel 41mm x 41mm x 2.0mm thick (P1000) x 250mm Long - HDG M8 x 65mm Shield Anchors - EG M10 x 25mm Hex Set SCREW - EG M10 x 8mm thick SPRING NUT - EG

2 2 4 4 4

Aircon Set 550mm Slotted Cantilever Arm HDG Complete

Slotted C/L Arms (FPA type) 550mm Length x 2.0mm (P1000 Arm) Back Plate : 150mm x 45mm x 6mm - HDG Backing Channel 41mm x 41mm x 2.0mm thick (P1000) x 250mm Long - HDG M8 x 65mm Shield Anchors - EG M10 x 25mm Hex Set SCREW - EG M10 x 8mm thick SPRING NUT - EG

2 2 4 4 4

Aircon Set 600mm Slotted Cantilever Arm HDG Complete

Slotted C/L Arms (FPA type) 600mm Length x 2.0mm (P1000 Arm) Back Plate : 150mm x 45mm x 8mm - HDG Backing Channel 41mm x 41mm x 2.0mm thick (P1000) x 250mm Long - HDG M10 x 75mm Shield Anchors - EG M10 x 25mm Hex Set SCREW - EG M10 x 8mm thick SPRING NUT - EG

2 2 4 4 4

Aircon Set 650mm Slotted Cantilever Arm HDG Complete

Slotted C/L Arms (FPA type) 650mm Length x 2.0mm (P1000 Arm) Back Plate : 150mm x 45mm x 8mm - HDG Backing Channel 41mm x 41mm x 2.0mm thick (P1000) x 250mm Long - HDG M10 x 75mm Shield Anchors - EG M10 x 25mm Hex Set SCREW - EG M10 x 8mm thick SPRING NUT - EG

2 2 4 4 4

EPC CODE

DESCRIPTION

SET COMPRISES

QTY/SET

450mm

Aircon Set 450mm Slotted Cantilever Arm EPC (Beige) Complete

Slotted C/L Arms (FPA type) 450mm Length x 1.6mm (P2000 Arm) Back Plate : 150mm x 45mm x 6mm - EPC Backing Channel 41mm x 41mm x 2.0mm thick (P1000) x 250mm Long - EPC M8 x 65mm Shield Anchors - EG M10 x 25mm Hex Set SCREW - EG M10 x 8mm thick SPRING NUT - EG

2 2 4 4 4

550mm

Aircon Set 550mm Slotted Cantilever Arm EPC (Beige) Complete

Slotted C/L Arms (FPA type) 550mm Length x 2.0mm (P1000 Arm) Back Plate : 150mm x 45mm x 6mm - EPC Backing Channel 41mm x 41mm x 2.0mm thick (P1000) x 250mm Long - EPC M8 x 65mm Shield Anchors - EG M10 x 25mm Hex Set SCREW - EG M10 x 8mm thick SPRING NUT - EG

2 2 4 4 4

600mm

Aircon Set 600mm Slotted Cantilever Arm EPC (Beige) Complete

Slotted C/L Arms (FPA type) 600mm Length x 2.0mm (P1000 Arm) Back Plate : 150mm x 45mm x 8mm - EPC Backing Channel 41mm x 41mm x 2.0mm thick (P1000) x 250mm Long - EPC M10 x 75mm Shield Anchors - EG M10 x 25mm Hex Set SCREW - EG M10 x 8mm thick SPRING NUT - EG

2 2 4 4 4

Aircon Set 650mm Slotted Cantilever Arm EPC (Beige) Complete

Slotted C/L Arms (FPA type) 650mm Length x 2.0mm (P1000 Arm) Back Plate : 150mm x 45mm x 8mm - EPC Backing Channel 41mm x 41mm x 2.0mm thick (P1000) x 250mm Long - EPC M10 x 75mm Shield Anchors - EG M10 x 25mm Hex Set SCREW - EG M10 x 8mm thick SPRING NUT - EG

2 2 4 4 4

I0005867

I0005868

I0005869

650mm I0005870

25

CAB-STRUT BRACKETS

Material: Unless otherwise noted, Cab-Strut fittings are pressed from hot rolled, pickled and oiled plate or strip steel

Hole size,14mm diameter, Hole spacing: 20mm from end of fitting, 48mm centre to centre: Fitting width: 40mm unless otherwise stated; Fitting thickness: 6mm unless otherwise stated

Subject to commercial tolerances

All dimensions subject to commercial tolerances.

Standard Dimensions: The following dimensions apply to all fittings except where noted on the part drawing:

For product masses see page 54

Flat Fittings P1061 A=7mm P1062 A=9mm P1063 A=11mm P1064 A=14mm

60g Ea.

AĂ˜ 88

136

184

P1067

P1066

P1065

232

P1941

40 Thickness 5mm 90 41

P1924

41

P2079

136 90

P1036

90

P1031

136

P1028 136

138

90 64

P1979

90

P1356

138

P1358

234 90

P1380

P1953 90

90

90

90°angle Fittings 50 47

P1026

P1068

55

42

89

P1325

36 104

42

50 95

P1034

P2484

95

P1035

90

P1033

50

50

P1326

138

103

90 55

90 102

(Replaces 102 1331 & 1332)

90

P1458

P1037 51 98

90

P1038

56

P1357

137

90

90

90

104

P1359

P1993

104

137

P1727

41

41 51

47

“U" Shape 83

P1047

P4047

P1737

42

P4376

84

43 141

138

138

P1044

47

P4376-A

138

P4377

186

P1377

186

P2346

137

98 41

43

89

26

CAB-STRUT BRACKETS

“Z" Shape

For product masses see page 54

27

P1045

22 54

41

P4045

P1347

Trolley Assembly P2750 Trolley Assembly

42

42

Base Plates 40

37

P2072-S1 100

100

17

51

60

P2073/A

Ø 7mm

3,5

54

89

Slotted Fittings

76

P1000 Channel

42

42

88

54

P4347

P1450 Cable Ladder Hold-down Bracket

67

99

P1747

P1749

38 67

180

100

38

Ideal for sliding doors, welding curtains etc.

Beam Clamps

Slotted Fittings 90

57

38

P1130

A=170 B=66

P1713

80 B

38

35

P1270

P1131

64 90

A

A=220 B=116

95

2x M12

M12

P1271

48

22

41

10

M12

38

Beam Clamps M10

5

M12

22

P1272

P1796

Purlin Clamp 8 or 10mm M6/M8, M10 & M12

45 22 90

31

Flange Clamp 6, 8,10 or 12mm

21 30

20

60

Angle Fittings

Beam Clamps BEAM CLAMPS ARE NOT RECOMMENDED FOR USE IN THE VERTICAL PLANE

P1272/U Accepts Threaded Rod 10 Ø Max.

49

O

45

P1032

P1072

41 41

45O

P1073

94 41

45O

138

Angle Fittings 94

P1546 P2094 P2095 P2096

O

45

P1074

P1191

P1192

90

O

45

68

68

45O

Angle Fittings P2101 P2102 P2103 P2104

A B mm 30° 82 22½° 82 15° 82 7½° 82

P2101 - P2104

A B mm 45° P2097 58 82½° 43 P2098 75° P2099 43 67½° 46 P2100 P1546 - P2100

A B mm 60° 48 52½° 52 37½° 46 37½° 67

20 B

A

Variable Angle Fittings 20

B

A 20 64

P1186 P2105 P2106 P2107 P2108 P2109 P2110

A 45° 82½° 75° 67½° 60° 52½° 37½°

B mm 78 65 67 69 73 74 86

A

54

102

Var.

P1843

Var.

P1354

B 64

54

102

P1186 - P2110

LOAD DATA FOR BRACKETS

Channel Bearing Loads

Connection Bearing Loads

LOAD

LOAD

700 kg

P1000 P2000 P4000

1 500 kg 650 kg 750 kg

P1000 P2000 P4000

Safety factor = 2.0

P1000 450 kg P2000 270 kg

P1000 900 kg P2000 400 kg

P1000 P2000

900 kg 650 kg

P1000 650 kg P2000 350 kg

300 kg

P1000 650 kg P2000 450 kg

P1000 1300 kg P2000 680 kg

P1000 450 kg P2000 220 kg

2 200 kg 900 kg 1 000 kg 300 kg

27

PIPE & CABLE CLAMPS

Split Clamps

For product masses see page 54

REF Diameter

Standard finish galvanised (EG) Rubber Insert Pull strength 600kg Twist strength 8kg

SC/12-16 ZP R/L SC/15-19 ZP R/L SC/20-25 ZP R/L SC/26-30 ZP R/L SC/32-36 ZP R/L SC/38-43 ZP R/L SC/47-51 ZP R/L SC/53-58 ZP R/L SC/60-64 ZP R/L SC/68-72 ZP R/L SC/75-80 ZP R/L SC/81-86 ZP R/L SC/87-92 ZP R/L SC/99-105 ZP R/L SC/107-112 ZP R/L SC/113-118 ZP R/L SC/125-130 ZP R/L SC/132-137 ZP R/L SC/138-142 ZP R/L SC/148-152 ZP R/L SC/159-166 ZP R/L SC/200-212 ZP R/L SC/215-220 ZP R/L SC/249-254 ZP R/L SC/314-319 ZP R/L

Material/Finish: Mild Steel Zinc-Electroplated (EG) Pipe Clamp Sizes: Diameter range stated is the suitable pipe O.D range Safe Working Load (tensile) : 200 kg Sound Reduction: 18 dB (A) Working Temperature Range: -40°C / +110°C Fire resistance: Class B2 ( DIN 4102) Rubber : EPDM Rubber (Ethylene Propylene Diene Monomer (M-class) rubber) Thickness : 4 -5mm

T (mm)

A (mm)

B (mm)

C (mm)

2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5

20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0

M6 x 20mm M6 x 20mm M6 x 20mm M6 x 20mm M6 x 20mm M6 x 20mm M6 x 20mm M6 x 20mm M6 x 20mm M6 x 20mm M6 x 20mm M6 x 20mm M6 x 20mm M6 x 20mm M6 x 20mm M6 x 20mm M6 x 25mm M6 x 25mm M6 x 25mm M6 x 25mm M6 x 25mm M6 x 25mm M6 x 25mm M6 x 25mm M6 x 25mm

M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10 M8 / M10

Traditional 2/Piece Clamps

C (M8/M10 Combi-nut)

A

B

T

TP 2/Piece Clamps

Standard Finish: Galvanised (PG) Fasteners (EG) Supplied separately Design Load Safety Factor of 5

Overall Bolt Material Ø mm Size mm Thickness mm

Part Number

Part No.

Overall Ø

P2025 P1108 P2026 P1108-A P2027 P1109 P2028 P1111 P2030 P1112 P2032 P1113 P2034 P1114 P1115 P2038 P2039 P1117 P2043 P1118 P1119 P1120 P1121 P1122 P1123 P1124 P1125 P1126 P1127 P1129

7,0-10,5 10,5-12,5 11,5-13,5 10,5-14,5 14,5-16,5 16,0-18,5 16,5-19,5 21,0-25,5 25,5-28,0 27,0-30,0 30,0-33,5 32,0-36,0 35,0-40,0 38,0-44,0 43,0-51,0 49,0-52,0 47,0-61,0 54,0-70,0 62,0-75,0 71,0-85,0 87,0-95,0 99-110 110-122 116-140 135-145 141-175 160-200 196-230 225-270 245-280

Fasteners Required

M6 x 20mm Gutter Bolt & Nut Required

M6 x 25mm Gutter Bolt & Nut Required

M8 x 35mm Hex Set Screw & M8 Hex Nut Required

M10 x 50mm Hex Set Screw & M10 Hex Nut Required M10 x 60mm Hex Set Screw & M10 Hex Nut Required

Body and screw galvanised (EG) Design load 200kg (safety factor of 5) Suitable for pipework and cables

Supplied as one piece including fastener Designed for use with Cab-Strut channel Practical range of eleven convenient sizes

TP15/20

15-20

M6 x 20

1,6

TP20/25

20-25

M6 x 20

1,6

Design Load

Material Thickness

TP25/30

25-30

M6 x 20

1,6

TP30/40

30-40

M6 x 20

2,0

180 kg 180 kg 180 kg 180 kg 180 kg 180 kg 180 kg 180 kg 180 kg 270 kg 270 kg 270 kg 270 kg 270 kg 360 kg 360 kg 360 kg 360 kg 360 kg 360 kg 360 kg 360 kg 360 kg 360 kg 360 kg 360 kg 360 kg 360 kg 360 kg 360 kg

1,5mm 1,5mm 1,5mm 1,5mm 1,5mm 1,5mm 1,5mm 1,5mm 2,0mm 2,0mm 2,0mm 2,0mm 2,0mm 2,0mm 2,5mm 2,5mm 2,5mm 2,5mm 2,5mm 2,5mm 2,5mm 2,5mm 2,5mm 2,5mm 2,5mm 3,0mm 3,0mm 3,0mm 3,0mm 3,0mm

TP40/50

40-50

M8 x 20

2,0

TP50/60

50-60

M8 x 20

2,0

TP60/70

60-70

M8 x 20

2,0

TP70/80

70-80

M8 x 20

2,5

TP80/90

80-90

M8 x 20

2,5

TP90/100

90-100

M8 x 30

2,5

TP100/110 100-110 M8 x 30 TP110/120 110-120 M8 x 30

2,5

TP120/130 120-130 M8 x 30

2,5

2,5

Strap Clamps Supplied with strap, studs, nuts, washers and collets Designed for use with Cab-Strut channel Practical range of four convenient straps which are fully adjustable and offer a

very flexible range of sizes Strap, studs, nuts, washers and collets galvanised (EG) Suitable for large diameter poles and pipes

Part Number

Diameter

Strap Length

Thread Size

Stud Length

T1STCL/75-100MM/EG T1STCL/100-125MM/EG T1STCL/125-150MM/EG T1STCL/150-175MM/EG T1STCL/175-200MM/EG

75-100mm 100-125mm 125-150mm 150-175mm 175-200mm

160mm 200mm 230mm 295mm 325mm

M10 M10 M10 M10 M10

85mm 95mm 115mm 120mm 135mm

PIPE & CABLE CLAMPS

28

For product masses see page 54

“Q” Clamps

P75 Hanger Clamps

Light and strong Body galvanised (SG) Screw galvanised (SG) One common clamp for all applications

Standard finish galvanised (PG) Fasteners (EG) Suitable for hanging plumbing, drainage and sprinkler pipes

Clamp Size

Bolt Size

BØ (mm)

Clamp Size

Bolt Size

BØ (mm)

Q16mm Q20mm Q26mm Q32mm Q40mm Q46mm

M6 M6 M6 M6 M8 M8

16 20 26 32 40 46

Q52mm Q58mm Q66mm Q70mm Q78mm

M8 M8 M8 M8 M8

52 58 66 70 78

P75/15 P75/20 P75/25 P75/32 P75/40 P75/50 P75/65 P75/80 P75/100 P75/125 P75/150 P75/200

B

Angle Iron

D

15 20 25 32 40 50 65 80 100 125 150 200

1,6 1,6 1,6 1,6 1,6 1,6 2,0 2,0 2,0 2,5 3,0 3,5

25 25 25 25 25 25 25 25 25 25 25 30

52 57 68 75 87 110 118 129 152 194 228 295

Aluminium Trefoil Clamps No magnetic circuit can be created in aluminium Trefoil clamps can withstand a rupturing capacity of 95kA at 750mm spacings

Diameter A Mat. Bolt (mm) (mm) (mm) 21 26 34 42 48 60 76

0,8 0,8 1,0 1,0 1,0 1,0 1,2

Diameter A Mat. Bolt (mm) (mm) (mm)

Part No.

M6 M6 M6 M6 M6 M6 M6

B

Cabstrut Channel

Saddle Clamps

SS1 SS1/1 SS1/2 SS1/3 SS1/4 SS1/5 SS1/6

A

M8 M8 M8 M8 M8 M8 M10 M10 M10 M10 M10 M12

Standard finish galvanised (PG)

Part No.

C

A B C D E Part Number (mm) (mm) (mm) (mm) (mm)

Wire Mesh Tray Application

Cable Ladder Cross Rung

E (Thread Rod)

1,2 1,2 2,0 2,0 2,0 2,0

88 101 114 142 173 225

SS1/7 SS1/8 SS1/9 SS1/10 SS1/11 SS1/12

M8 M8 M8 M8 M8 M8

Part No.

Cable Size A (mm)

TR-30 TR-37 TR-42 TR-48 TR-53 TR-57 TR-63

30 37 42 48 53 57 63

Mat. Bolt (mm) (mm) 4,5 4,5 4,5 4,5 4,5 4,5 4,5

M6 M6 M6 M6 M6 M6 M6

M6 Hi-tensile Bolt (EG)

AØ

AØ

Cable Diameter/Mass Approximate calculated dimension and nett mass per 100 metres

Approximate calculated dimension and nett mass per 100 metres

Approximate calculated dimension and nett mass per 100 metres

Rated area mm2

Number of cores

Max. overall dia. mm

Nett mass kg/100m

Gland to suit

Rated area mm2

Number of cores

Max. overall dia. mm

Nett mass kg/100m

Gland to suit

Rated area mm2

Number of cores

Max. overall dia. mm

Nett mass kg/100m

Gland to suit

1,5

2 3 4 7 12 2 3 4 7 2 3 4 7 2

13,7 14,2 15,1 17,6 22,9 14,5 16,1 16,9 20,0 16,8 17,5 19,4 22,5 18,6

33 37 41 55 89 39 43 51 79 49 55 75 101 67

0 0 0 1 2 0 0 1 2 0 1 1 2 1

6

3 4 2 3 4 2 3 4 2 3 4 2 3 4

19,6 20,9 20,7 21,9 23,4 23,1 25,9 27,9 22,4 26,9 29,1 23,9 28,8 32,5

77 89 85 99 117 108 149 176 113 173 211 138 213 283

1 1 1 2 2 2 2 3 2 3 3 2 3 4

35 50

3 4 3 4 3 4 3 4 3 4 3 4 3 4

33,2 36,5 36,5 40,2 41,3 45,2 43,7 47,9 47,4 53,7 53,0 58,7 59,2 66,7

295 367 275 471 486 610 567 716 685 922 864 1092 1076 1438

4 4 4 4 4 5 5 5 5 6 6 6 6 7

2,5

4

6

10

16

25

35

70 95 120 150 185 240

29

GRIPPLE HANGERS

www.gripple.com

The Revolutionary Wire Hanger System Serrated Teeth Stainless Springs (type 302 S26) End Cap Zinc Housing Wire Rope (entry hole)

Gripple Hangers are easy to use and install, saving time and money ls r e q ui r e

no

d

t

oo

king st

self loc

Gripple Hangers are an alternative to threaded rod and chain and no additional connectors, bearers or brackets are required

all

Strong yet lightweight Gripple Hangers have no joints, are proof tested and safe

6

in x f ast er to

Setting Key (entry hole) Locking Wedges

Standard finish galvanised, stainless steel available on request.

Setting Key

LOOP-END APPLICATION

STUD-END APPLICATION

STANDARD ACCESSORIES

2mm Dia. / SWL 10-45kg

Anchor Adaptor

No.2

3mm Dia. / SWL 45-90kg

(Can also be used with certain Cab-Clips)

No.3

Wire End Tidy Clip

5mm Dia. / SWL 90-225kg

No.4

Never exceed 60°!

6mm Dia. / SWL 225-325kg

No.5

Pre-packed Kits

Order kits containing specified Gripple number, wire cut to length, setting key and wire end tidy clip SWL (Safe Working Load) Safety Factor: 5

No. 2 Gripple Hanger - Loop End REF LE2001 LE2002 LE2003 LE2004 LE2005 LE2006 LE2007 LE2008 LE2009 LE2010

A (m)

BØ (mm)

S Kg

1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0

10-45 10-45 10-45 10-45 10-45 10-45 10-45 10-45 10-45 10-45

B

60° Max

Ready made lengths from 1m to 10m come as standard 100m coils available

SWL is reduced by 50% at 60°

No. 2 Gripple Hanger - M6 Stud End REF

SWL Safety Factor:5

A

60° Max

SE2001 SE2002 SE2003 SE2004 SE2005 SE2006 SE2007 SE2008 SE2009 SE2010

B

A (m)

BØ (mm)

S Kg

1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0

10-45 10-45 10-45 10-45 10-45 10-45 10-45 10-45 10-45 10-45

M8 ON REQUEST ONLY SWL Safety Factor:5

A

GRIPPLE HANGERS

www.gripple.com

30

The Revolutionary Wire Hanger System

No. 3 Gripple Hanger - Loop End REF LE3001 LE3002 LE3003 LE3004 LE3005 LE3006 LE3007 LE3008 LE3009 LE3010

No. 3 Gripple Hanger - M6 Stud End M8 ON REQUEST ONLY

A (m)

BØ (mm)

S Kg

1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0

45-90 45-90 45-90 45-90 45-90 45-90 45-90 45-90 45-90 45-90

SWL Safety Factor:5

REF SE3001 SE3002 SE3003 SE3004 SE3005 SE3006 SE3007 SE3008 SE3009 SE3010

A

B

LE4001 LE4002 LE4003 LE4004 LE4005 LE4006 LE4007 LE4008 LE4009 LE4010

BØ (mm)

S Kg

1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0

45-90 45-90 45-90 45-90 45-90 45-90 45-90 45-90 45-90 45-90

SWL Safety Factor:5

A

B

No. 4 Gripple Hanger - Loop End REF

A (m)

A (m)

BØ (mm)

S Kg

1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0

90-225 90-225 90-225 90-225 90-225 90-225 90-225 90-225 90-225 90-225

No. 5 Gripple Hanger - Loop End

SWL Safety Factor:5

REF LE5001 LE5002 LE5003 LE5004 LE5005 LE5006 LE5007 LE5008 LE5009 LE5010

A (m)

BØ (mm)

S Kg

1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0

225-325 225-325 225-325 225-325 225-325 225-325 225-325 225-325 225-325 225-325

SWL Safety Factor:5

A

A

B B

Gripple “Y” System A simple, effective system to support both sides of duct or tray utilising just one Gripple hanger.

REF

A (m)

B Width (mm)

S Kg

i0005793 i0005794

3.0 3.0

50-300 300-1000

90-225 90-225

SWL Safety Factor:5

B

A

31

FASTENERS & ANCHORS For product masses see page 54

Hex Nuts

Cab-Strut Nuts Description

Size

Finish

Long Spring Short Spring No Spring

M6, M8, M10, M12 M6, M8, M10, M12 M6, M8, M10, M12

EG, SS316 EG, SS316 EG

For technical Information see page 20

Fully Threaded Rod

Nylock Nuts

Diameter M4 M5 M6 M8 M10 M12

Diameter M6 M8 M10 M12

Finish: EG, SG, SS304, SS316, BR

Diameter

Length

Finish

M6 M8 M10 M12

1m, 3m 1m, 3m 1m, 3m 1m, 3m

EG, SG, SS304 EG, SG, SS304 EG, SG, SS304 EG, SG, SS304

DIN975

Grade 8 DIN934

Cab-Strut Stud Nuts

Finish: EG, SS304

Coupling Nuts

Size

Diameter

M10 x 85 M10 x 95 M10 x 115 M10 x 120 M10 x 135

M6 x 25mm M8 x 30mm M10 x 35mm M12 x 40mm

Finish: EG

Finish: EG

Hex Set Screw

Threaded Rod Cutters

GRADE 4, 6 DIN558 Diameter Length (mm) Finish

Cuts M6, M8, & M10 threaded rod with very little effort Burr free cut allows for immediate use of the threaded rod

M6, M8, M10, M12 12, 16, 20, 25, 30, 35, 40, 45, 50, 60 EG, SG, SS304, SS316

Heavy duty construction 2-step action shear Lightweight Cutter blades reverse for increased life

Gutter Bolts & Nuts

Suitable for carbon steel rods One-handed Operation

M8

Diameter Length M6 M6 M6 M6 M6

Diameter

12mm 16mm 20mm 25mm 30mm

M6 x 16mm 3,2mm Shank M8 x 16mm 3,2mm Shank

Finish: SG, SS316

Finish: EG Single Slot NK M8 & NK M10

Cup Square Bolts, Nuts & Washer

Dual Slot NK M8/M10

M10

Cone Point Screws Diameter

Part Number

Description

Thread Size

Full Length (mm)

NK M8 NK M10 NK M8/M10 NKS M6 NKS M8 NKS M10

Single Slot Threaded Rod Cutter Single Slot Threaded Rod Cutter Dual Slot Threaded Rod Cutter Replacement Cutter Blades Replacement Cutter Blades Replacement Cutter Blades

M8 M10 M8 & M10 M6 M8 M10

765 765 765 -

M10 x 45mm M12 x 45mm

Finish: EG, SS316

Mushroom Head Screws & Nuts Diameter M10 x 20mm

Finish: SG

32

FASTENERS & ANCHORS For product masses see page 54

Smooth EG

Knurled Yellow Pass.

33

CAB-CLIPS - Cab-Clip Electrical and Mechanical Fixing Systems CAB-CLIPS are ideal for cables, trunking, cable tray, conduit, pipework, ducting, light fittings, suspended ceilings and hundreds of other uses CAB-CLIPS are labour saving and significantly reduce installation time CAB-CLIPS simply hammer or push on and require only the most basic tools

Quick Find Index For Fixing To

Tools Required FLANGES

Screwdriver

Drill

Hammer

Waterpump Pliers

Loading

S Kg

U Kg

Static SF 3:1

Ultimate SF:Nil

Finish (Unless otherwise stated) S.G. Zinc Plated 12-15 microns for enhanced corrosion protection (600 hours+)

Fixing Type

Page

FLANGE

39

THREADED ROD

40-41

CABLE & TUBE

41-44

Z-PURLIN

44-45

CABLE TIE

45

STRAP

46

CLAMPS/MISCELLANEOUS

47

PURLINS

CHANNELS "STRUT"

FACINGS/ SOFFITS

RODS/TUBE CONDUIT

Timber

Threaded Rod

Brick/Mortar

Cable & Tube

CEILING STRIP/MISC.

34

CABCLIPS - Technical & Commercial

! All loads are for clips used on standard construction

Material ! Spring Steel conforming to BS EN 1449 Past 1.15 Grade

steelwork. Not recommended for use on stainless steel

CS 70

or aluminium support structures

! Austempered and hardened to HRC 38.52 !

S Kg

Static loads safety factor 3 to 1

!

U Kg

Ultimate loads maximum safe usable

Quality Assurance ! Generally in accordance with BS EN 9001 ! Every batch comprehensively inspected and tested to

destruction ! Similar testing on product from alternative Q.A.

Corrosive Protection ! Unless otherwise indicated spring steel fasteners are

approved sources

finished SG specifications ! SG - Zinc Plated 12 to 15 micron for enhanced corrosion

Loading ! Loads indicated are in kilograms for stationary vertical

protection (600 HR+)

loads as indicated

FLANGE FIXINGS

Beam Clip

Vertical Flange Clip

Universal Beam Clip

Beam Clip available in sizes to suit horizontal flanges from 1.5-20mm thick. 6.5mm hole receives hook, chain or nut and bolt connection.

Hammer on clip for vertical flanges from 1,5-7mm thick. 6.5 hole receives hook, chain or nut and bolt connection.

Universal Beam Clip available in sizes to suit horizontal flanges from 3-20mm thick. Suitable for horizontal and vertical screw/bolt connection.

REF BC153 BC38 BC814 BC1420

T (mm)

A (mm)

BØ (mm)

S Kg

1.5-3 3-8 8-14 14-20

16 18 26 30

6.5 6.5 6.5 6.5

72 90 90 90

REF

T (mm)

A (mm)

B (mm)

CØ (mm)

S Kg

VF155 VF57

1.5-5 5-7

53 53

19 19

6.5 6.5

72 72

B

T

REF

T (mm)

A (mm)

UBC38 UBC38S UBC814 UBC814S UBC1420 UBC1420S

3-8 3-8 8-14 8-14 14-20 14-20

36 36 36 36 36 36

M6x12 M6x12 M6x12

CØ (mm)

S Kg

M6 M6 M6 M6 M6 M6

45 45 45 45 45 45

A

T

C

A B

UBC

Large Beam Clip

Master Clamp

Large Beam Clip to suit horizontal flanges from 2330mm. Simple solution for fixing to outsized steel.

Screw clamp for horizontal flanges from 2-18mm thick.

Suitable for horizontal and vertical screw/bolt connection.

REF

T (mm)

A (mm)

BØ (mm)

U Kg

LBC2330

23-30

25

6.5

20

A

B (mm)

REF

A

T A BØ CØ DØ EØ FØ GØ (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)

SC65 2-18 SC107 2-18

34 34

M6 M6

6.5 10.7

M6 M6

6.5 6.5 B

B T

M4 10.7 M4 10.7

C

T

S Kg

45 45

B

UBCS

C A

D F

E

Ø

T G

35

THREADED ROD FIXINGS

Threaded Rod Hanger Threaded Rod Hanger for fixing to vertical faces.

Suits threaded rod M6, M8, M10 and M12. RH127 requires nut to secure.

REF

A (mm)

BØ (mm)

CØ (mm)

S Kg

28 28 28 28

6.5 6.5 6.5 6.5

M6 M8 M10 12.7

68 68 68 68

RH6T RH8T RH10T RH127

Large Beam Clip/Threaded Rod Hanger Combination A simple cost-effective solution for fixing onto outsized steelwork Grips firmly onto flanges up to 30mm. Suits threaded rod M6, M8, M10 and M12. RH127 requires nut to secure.

REF

A T (mm) (mm) 25 25 25 25

LBC2330-RH6T LBC2330-RH8T LBC2330-RH10T LBC2330-RH127

BØ (mm)

U Kg

M6 M8 M10 12.7

20 20 20 20

23-30 23-30 23-30 23-30

Right Angle Bracket for soffit fixing. Incorporates Threaded Rod Hanger to suit rod diameters M6, M8, M10 and M12. RH127 requires nut to secure.

REF

A (mm)

BØ (mm)

CØ (mm)

S Kg

47 47 47 47 65 65 65 65

M6 M8 M10 12.7 M6 M8 M10 12.7

6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5

68 68 68 68 68 68 68 68

RAB26-RH6T RAB26-RH8T RAB26-RH10T RAB26-RH127 RAB44-RH6T RAB44-RH8T RAB44-RH10T RAB44-RH127

A

B

Right Angled Bracket/ Threaded Rod Hanger Combination

C

A

A

T B

C

B B

Beam Clip/Threaded Rod Hanger Combination Beam Clip to suit horizontal flanges 1,5-20mm thick.

Incorporating Threaded Rod Hanger for rod diameters M6, M8, M10 and M12. RH127 requires nut to secure.

REF

T (mm)

A (mm)

BØ (mm)

BC153-RH6T BC153-RH8T BC153-RH10T BC153-RH127

1.5-3 1.5-3 1.5-3 1.5-3

44 44 44 44

M6 M8 M10 12.7

68 68 68 68

BC38-RH6T BC38-RH8T BC38-RH10T BC38-RH127

3-8 3-8 3-8 3-8

46 46 46 46

M6 M8 M10 12.7

68 68 68 68

BC814-RH6T BC814-RH8T BC814-RH10T BC814-RH127

8-14 8-14 8-14 8-14

54 54 54 54

M6 M8 M10 12.7

68 68 68 68

BC1420-RH6T BC1420-RH8T BC1420-RH10T BC1420-RH127

14-20 14-20 14-20 14-20

60 60 60 60

M6 M8 M10 12.7

68 68 68 68

Height Adjustable Threaded Rod Hanger

Vertical Flange Clip/ Threaded Rod Hanger Combination

Height Adjustable Threaded Rod Hanger Clip for fixing to vertical faces. Clip flexes to allow rapid adjustment of threaded rod. Suits threaded rod diameter M6, M8 & M10.

Hammer-on Vertical Flange Clip to suit flange thickness 1.5-7mm. Incorporates Threaded Rod Hanger for rod diameters M6, M8, M10 and M12.

RH127 requires nut to secure.

REF

S Kg

REF

T (mm)

A (mm)

BØ (mm)

S Kg

VF155-RH6T VF155-RH8T VF155-RH10T VF155-RH127 VF57-RH6T VF57-RH8T VF57-RH10T VF57-RH127

1.5-5 1.5-5 1.5-5 1.5-5 5-7 5-7 5-7 5-7

70 70 70 70 70 70 70 70

M6 M8 M10 12.7 M6 M8 M10 12.7

68 68 68 68 68 68 68 68

TRH6 TRH8 TRH10

T

S Kg

55 55 55

6.5 6.5 6.5

M6 M8 M10

60 70 70

C

Vertical Flange Clip/Height Adjustable Threaded Rod Hanger Combination

B

Vertical Flange Clip to suit flanges 1.5-7mm thick, incorporating Height Adjustable Threaded Rod Hanger for threaded rod diameters M6, M8 & M10.

Threaded rods adjusted by flexing clip with finger.

Master Clamp/Threaded Rod Hanger Combination

SC107-RH6T SC107-RH8T SC107-RH10T SC107-RH127

A

CØ (mm)

A

A

REF

BØ (mm)

B

Screw Clamp for horizontal flanges up to 18mm.

Incorporates Threaded Rod Hanger to suit rod diameters M6, M8, M10 and M12. RH127 requires nut to secure.

T

A (mm)

T (mm)

AØ (mm)

S Kg

Max 18 Max 18 Max 18 Max 18

M6 M8 M10 12.7

45 45 45 45

T (mm)

AØ (mm)

S Kg

VF155-TRH6 VF155-TRH8 VF155-TRH10 VF57-TRH6 VF57-TRH8 VF57-TRH10

1.5-5 1.5-5 1.5-5 5-7 5-7 5-7

M6 M8 M10 M6 M8 M10

60 70 70 60 70 70

T

B

T

A

REF

36

THREADED ROD FIXINGS

Master Clamp/Height Adjustable Threaded Rod Hanger Combination

Height Adjustable Threaded Rod Hanger Combination

Beam Clip/Height Adjustable Threaded Rod Hanger Combination

Screw Clamp for horizontal flanges up to 18mm.

Incorporates Adjustable Threaded Rod Hanger to suit rod diameters M6, M8 & M10.

Double Clip for fixing threaded rod to threaded rod, diameters M6, M8 & M10 in various combinations (see tabulated information) Height adjustable by flexing clip with finger.

Beam Clip for horizontal flange fixing, incorporating Height Adjustable Threaded Rod Hanger to suit threaded rod diameter M6, M8 & M10. Beam Clips suit flange thickness 2-20mm

REF

T (mm)

AØ (mm)

S Kg

SC107-TRH6 SC107-TRH8 SC107-TRH10

Max 18 Max 18 Max 18

M6 M8 M10

25 25 25

REF

AØ (mm)

BØ (mm)

S Kg

M6 M6 M6 M8 M8 M10

M6 M8 M10 M8 M10 M10

60 60 60 70 70 70

TRH6-TRH6 TRH6-TRH8 TRH6-TRH10 TRH8-TRH8 TRH8-TRH10 TRH10-TRH10

T

A

A

REF

T (mm)

AØ (mm)

S Kg

BC153-TRH6 BC153-TRH8 BC153-TRH10

1.5-3 1.5-3 1.5-3

M6 M8 M10

60 70 70

BC38-TRH6 BC38-TRH8 BC38-TRH10

3-8 3-8 3-8

M6 M8 M10

60 70 70

BC814-TRH6 BC814-TRH8 BC814-TRH10

8-14 8-14 8-14

M6 M8 M10

60 70 70

BC1420-TRH6 BC1420-TRH8 BC1420-TRH10

14-20 14-20 14-20

M6 M8 M10

60 70 70

B

T

A

CABLE & TUBE FIXINGS

Cable Run Clip

Support Clip

Snap-In Conduit Clip

Simple clip available in sizes to suit horizontal or vertical flanges from 2-12mm thick. Suitable for round conduit or cable.

Spring clip for horizontal and vertical flanges or threaded drop rods. Designed to support conduit 1640mm diameter. No tools required.

For fixing to vertical or horizontal surfaces. Conduit snaps securely into position. Designed to support conduit 18-33mm diameter.

REF CRS4555 CRS67 CRS89 CRS1011 CRS1214 CRS1519 CRS2024 CRS2532 CRM4555 CRM67 CRM89 CRM1011 CRM1214 CRM1519 CRM2024 CRM2532 CRL4555 CRL67 CRL89 CRL1011 CRL1214 CRL1519 CRL2024 CRL2532

T (mm) A Ø (mm) 2-4 2-4 2-4 2-4 2-4 2-4 2-4 2-4 4-7 4-7 4-7 4-7 4-7 4-7 4-7 4-7 8-12 8-12 8-12 8-12 8-12 8-12 8-12 8-12

REF

4.5-5.5 6-7 8-9 10-11 12-14 15-19 20-24 25-32 4.5-5.5 6-7 8-9 10-11 12-14 15-19 20-24 25-32 4.5-5.5 6-7 8-9 10-11 12-14 15-19 20-24 25-32

A (mm)

BØ (mm)

S Kg

3-5 6-9 9-13 3-5 6-9 9-13 13-16 16-20

16-25 16-20 16 20-38 20-35 20-30 20-25 20

45 45 45 45 45 45 45 45

M6/M8/M10 M6/M8/M10

20 Max 40 Max

22 22

REF

(For flanges) SC313T

SC320T

SICC1825 SICC2229 SICC2933

A (mm)

BØ (mm)

CØ (mm)

U Kg

38 38 43

18-25 22-29 29-33

6.5 6.5 6.5

11 11 11

(For rod) SC313T SC320T

C B

A

A B

A

A

T

B

37

CABLE & TUBE FIXINGS

Locking Conduit Clip For fixing to vertical or horizontal surfaces.

Conduit/cable is held securely in position by locking mechanism. Use pliers to secure. Designed to support conduit/cable 12-57mm diameter.

REF LCC1219 LCC1926 LCC2632 LCC3240 LCC4047 LCC4757

A (mm)

BØ (mm)

CØ (mm)

S Kg

44 44 55 68 79 87

12-19 19-26 26-32 32-40 40-47 47-57

6.5 6.5 6.5 6.5 6.5 6.5

45 45 45 45 45 45

C

A

B

Double Run Snap-In Conduit Mount Double Snap-in Conduit Clips to support multidirectional conduit. Supports conduit 18-33mm diameter. No tools required.

Double Run Locking Conduit Mount

Beam Clip/Locking Conduit Clip Combination

Double Locking Conduit Clip to support multidirectional conduit. Use pliers to lock. Designed to support conduit 12-57mm diameter.

Beam Clip with Locking Conduit Clip for fixing to horizontal or vertical flanges. Conduit is held adjacent to face of flange. Designed to support conduit/cables 12-57mm diameters.

REF LCC1219-LCC1219 LCC1219-LCC1926 LCC1219-LCC2632 LCC1219-LCC3240 LCC1219-LCC4047 LCC1219-LCC4757 LCC1926-LCC1926 LCC1926-LCC2632 LCC1926-LCC3240 LCC1926-LCC4047 LCC1926-LCC4757 LCC2632-LCC2632 LCC2632-LCC3240 LCC2632-LCC4047 LCC2632-LCC4757 LCC3240-LCC3240 LCC3240-LCC4047 LCC3240-LCC4757 LCC4047-LCC4047 LCC4047-LCC4757 LCC4757-LCC4757

AØ (mm)

BØ (mm)

U Kg

12-19 12-19 12-19 12-19 12-19 12-19 19-26 19-26 19-26 19-26 19-26 26-32 26-32 26-32 26-32 32-40 32-40 32-40 40-47 40-47 47-57

12-19 19-26 26-32 32-40 40-47 47-57 19-26 26-32 32-40 40-47 47-57 26-32 32-40 40-47 47-57 32-40 40-47 47-57 40-47 47-57 47-57

45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 A

REF

AØ (mm)

BØ (mm)

U Kg

SICC1825-SICC1825 SICC1825-SICC2229 SICC1825-SICC2933 SICC2229-SICC2229 SICC2229-SICC2933 SICC2933-SICC2933

18-25 18-25 18-25 22-29 22-29 29-33

18-25 22-29 29-33 22-29 29-33 29-33

11 11 11 11 11 11

B

Beam Clip/Snap-in Conduit Clip Combination

T (mm)

AØ (mm)

U Kg

BC38-SICC1825 BC38-SICC2229 BC38-SICC2933 BC814-SICC1825 BC814-SICC2229 BC814-SICC2933 BC1420-SICC1825 BC1420-SICC2229 BC1420-SICC2933

3-8 3-8 3-8 8-14 8-14 8-14 14-20 14-20 14-20

18-25 22-29 29-33 18-25 22-29 29-33 18-25 22-29 29-33

7 7 7 7 7 7 7 7 7

REF

T (mm)

AØ (mm)

U Kg

BC38-SICC1825R BC38-SICC2229R BC814-SICC1825R BC814-SICC2229R BC814-SICC2933R BC1420-SICC1825R BC1420-SICC2229R BC1420-SICC2933R

3-8 3-8 8-14 8-14 8-14 14-20 14-20 14-20

18-25 22-29 18-25 22-29 29-33 18-25 22-29 29-33

7 7 7 7 7 7 7 7

A

T T

A

AØ (mm)

U Kg

BC153-LCC1219 BC153-LCC1926 BC153-LCC2632 BC153-LCC3240 BC153-LCC4047 BC153-LCC4757

1.5-3 1.5-3 1.5-3 1.5-3 1.5-3 1.5-3

12-19 19-26 26-32 32-40 40-47 47-57

12 12 12 12 12 12

BC38-LCC1219 BC38-LCC1926 BC38-LCC2632 BC38-LCC3240 BC38-LCC4047 BC38-LCC4757

3-8 3-8 3-8 3-8 3-8 3-8

12-19 19-26 26-32 32-40 40-47 47-57

12 12 12 12 12 12

BC814-LCC1219 BC814-LCC1926 BC814-LCC2632 BC814-LCC3240 BC814-LCC4047 BC814-LCC4757

8-14 8-14 8-14 8-14 8-14 8-14

12-19 19-26 26-32 32-40 40-47 47-57

12 12 12 12 12 12

BC1420-LCC1219 BC1420-LCC1926 BC1420-LCC2632 BC1420-LCC3240 BC1420-LCC4047 BC1420-LCC4757

14-20 14-20 14-20 14-20 14-20 14-20

12-19 19-26 26-32 32-40 40-47 47-57

12 12 12 12 12 12

T

Beam Clip/Snap-In Conduit Combination - Reversed Beam Clip with Snap-In Conduit Clip for fixing to horizontal or vertical flanges. Designed to support conduit 18-33mm diameter.

REF

T (mm)

B

A

Beam Clip with Snap-In Conduit Clip for fixing to horizontal or vertical flanges. Designed to support conduit 18-33mm diameter

REF

A

Universal Beam Clip/Snap-In Conduit Clip Combination Universal Beam Clip with Snap-in Conduit Clip for fixing to horizontal or vertical flanges. Designed to support conduit 18-33mm.

REF

T (mm)

AØ (mm)

U Kg

UBC38-SICC1825 UBC38-SICC2229 UBC38-SICC2933 UBC814-SICC1825 UBC814-SICC2229 UBC814-SICC2933 UBC1420-SICC1825 UBC1420-SICC2229 UBC1420-SICC2933

3-8 3-8 3-8 8-14 8-14 8-14 14-20 14-20 14-20

18-25 22-29 29-33 18-25 22-29 29-33 18-25 22-29 29-33

11 11 11 11 11 11 11 11 11

T A

CABLE & TUBE FIXINGS

Universal Beam Clip/Side Mounted Snap-In Conduit Clip Combination Universal Beam Clip with side mounted Snap-In Conduit Clip for fixing to horizontal or vertical flanges.

Conduit is held away from the edge of flange.

Designed to support conduit 18-33mm diameter.

REF UBC38-SICC1825SM UBC38-SICC2229SM UBC38-SICC2933SM UBC814-SICC1825SM UBC814-SICC2229SM UBC814-SICC2933SM UBC1420-SICC1825SM UBC1420-SICC2229SM UBC1420-SICC2933SM

T (mm)

AØ (mm)

U Kg

3-8 3-8 3-8 814 814 814 14-20 14-20 14-20

18-25 22-29 29-33 18-25 22-29 29-33 18-25 22-29 29-33

11 11 11 11 11 11 11 11 11

38

Large Beam Clip/Locking Conduit Clip Combination

Master Clamp/Locking Conduit Clip Combination

Large Beam Clip to suit horizontal flanges from 2330mm thick with Locking Conduit Clip. Designed to support conduit 12-57mm diameter. Use pliers to lock.

Screw Clamp incorporating Locking Conduit Clip for horizontal flanges up to 18mm thick. Holds conduit or pipe adjacent to face of flange. Suits conduit or pipe 12-57mm diameter. Use pliers to lock. Conduit Clip swivels 360°.

REF

T (mm)

AØ (mm)

U Kg

REF

T (mm)

AØ (mm)

U Kg

LBC2330-LCC1219 LBC2330-LCC1926 LBC2330-LCC2632 LBC2330-LCC3240 LBC2330-LCC4047 LBC2330-LCC4757

23-30 23-30 23-30 23-30 23-30 23-30

12-19 19-26 26-32 32-40 40-47 47-45

10 10 10 10 10 10

SC65-LCC1219 SC65-LCC1926 SC65-LCC2632 SC65-LCC3240 SC65-LCC4047 SC65-LCC4757

18 Max 18 Max 18 Max 18 Max 18 Max 18 Max

12-19 19-26 26-32 32-40 40-47 47-57

45 45 45 45 45 45

A A

T

Master Clamp/Snap-In Conduit Clip Combination Screw Clamp incorporating Snap-in Conduit Clip for horizontal flanges up to 18mm thick. Holds conduit or pipe adjacent to face of flange. Suits conduit or pipe 18-33mm diameter. Conduit Clip swivels 360°.

Universal Beam Clip/ Locking Conduit Clip Combination

REF

Universal Beam Clip with Locking Conduit Clip for fixing to horizontal or vertical flanges. Conduit is held adjacent to face of flange. Designed to support conduit 12-57mm diameter. Use pliers to lock.

REF

T (mm)

AØ (mm)

U Kg

UBC38-LCC1219 UBC38-LCC1926 UBC38-LCC2632 UBC38-LCC3240 UBC38-LCC4047 UBC38-LCC4757 UBC814-LCC1219 UBC814-LCC1926 UBC814-LCC2632 UBC814-LCC3240 UBC814-LCC4047 UBC814-LCC4757 UBC1420-LCC1219 UBC1420-LCC1926 UBC1420-LCC2632 UBC1420-LCC3240 UBC1420-LCC4047 UBC1420-LCC4757

3-8 3-8 3-8 3-8 3-8 3-8 8-14 8-14 8-14 8-14 8-14 8-14 14-20 14-20 14-20 14-20 14-20 14-20

12-19 19-26 26-32 32-40 40-47 47-57 12-19 19-26 26-32 32-40 40-47 47-57 12-19 19-26 26-32 32-40 40-47 47-57

45 45 45 25 45 45 45 45 45 45 45 45 25 45 45 45 45 45

SC65-SICC1825 SC65-SICC2229 SC65-SICC2933

T (mm)

AØ (mm)

U Kg

18 Max 18 Max 18 Max

18-25 22-29 29-33

11 11 11

T

A

T

Master Clamp/Side Mounted Locking Conduit Clip Combination Screw Clamp incorporating side mounted Locking Conduit Clip for horizontal flanges up to 18mm thick.

Holds cable, conduit or pipe adjacent to edge of flange. Suits conduit or pipe 12-57mm diameter.

Conduit Clip swivels 360°.

REF SC107-LCC1219 SC107-LCC1926 SC107-LCC2632 SC107-LCC3240 SC107-LCC4047 SC107-LCC4757

T (mm)

AØ (mm)

U Kg

18 Max 18 Max 18 Max 18 Max 18 Max 18 Max

12-19 19-26 26-32 32-40 40-47 47-57

12 12 12 12 12 12

T

T A

A

Master Clamp/Side Mounted Snap-In Conduit Clip Combination Screw Clamp incorporating Side Mounted Snap-in Conduit Clip for horizontal flanges up to 18mm thick.

Holds conduit or pipe adjacent to edge of flange.

Suits conduit or pipe 18-33mm diameter. Conduit Clip swivels 360°.

REF SC107-SICC1825 SC107-SICC2229 SC107-SICC2933

T (mm)

AØ (mm)

U Kg

18 Max 18 Max 18 Max

18-25 22-29 29-33

7 7 7

Vertical Flange Clip/Snap-In Conduit Clip Combination Clips for vertical flanges from 1,5-7mm thick incorporating a Snap-In Conduit Clip for services 1833mm diameter. Holds services away from face of flange.

REF

T (mm)

AØ (mm)

U Kg

VF155-SICC1825 VF155-SICC2229 VF155-SICC2933 VF57-SICC1825 VF57-SICC2229 VF57-SICC2933

1.5-5 1.5-5 1.5-5 5-7 5-7 5-7

18-25 22-29 29-33 18-25 22-29 29-33

11 11 11 11 11 11

T

T A

T

A A

39

CABLE & TUBE FIXINGS

Vertical Flange Clip/Locking Conduit Clip Combination Clips for vertical flanges from 1,5-7mm thick incorporating a Locking Conduit Clip for services 12-57mm diameter. Holds services away from face of flange.

REF

T (mm)

AØ (mm)

U Kg

VF155-LCC1219 VF155-LCC1926 VF155-LCC2632 VF155-LCC3240 VF155-LCC4047 VF155-LCC4757

1.5-5 1.5-5 1.5-5 1.5-5 1.5-5 1.5-5

12-19 19-26 26-32 32-40 40-47 47-57

25 25 25 25 25 25

VF57-LCC1219 VF57-LCC1926 VF57-LCC2632 VF57-LCC3240 VF57-LCC4047 VF57-LCC4757

5-7 5-7 5-7 5-7 5-7 5-7

12-19 19-26 26-32 32-40 40-47 47-57

25 25 25 25 25 25

Vertical Flange Clip/Locking Conduit Clip Combination Reversed

Vertical Flange Clip/Snap-In Conduit Clip Combination Reversed

Clips for vertical flanges from 1,5-7mm thick incorporating a reversed Locking Conduit Clip for services 12-32mm diameter. Holds services beneath flange, recessed back from face.

Clips for vertical flanges from 1,5-7mm thick incorporating a reversed Snap-in Conduit Clip for services 18-33mm diameter. Holds services beneath flange, recessed back from face.

REF

T A (mm) (mm)

BØ (mm)

U Kg

VF155-LCC1219R VF155-LCC1926R VF155-LCC2632R

1.5-5 MAX20 1.5-5 MAX20 1.5-5 MAX20

12-19 19-26 26-32

12 12 12

12-19 19-26 26-32

12 12 12

5-7 5-7 5-7

VF57-LCC1219R VF57-LCC1926R VF57-LCC2632R

MAX20 MAX20 MAX20

REF

T (mm)

A (mm)

BØ (mm)

U Kg

VF155-SICC1825R VF155-SICC2229R VF155-SICC2933R VF57-SICC1825R VF57-SICC2229R VF57-SICC2933R

1.5-5 1.5-5 1.5-5 5-7 5-7 5-7

MAX20 MAX20 MAX20 MAX20 MAX20 MAX20

18-25 22-29 29-33 18-25 22-29 29-33

11 11 11 11 11 11

T

T

A A

A

A

B B

T

Girder Clips for Multi Cables Girder Clip to suit horizontal flange from 3-18mm, allows for cable tie attachment.

C

A

REF GC310 GC1018

T (mm)

A (mm)

3-10 10-18

52 52

T

B (mm) C (mm) 16 16

10 10

A B

Z-PURLIN HANGERS (45°)

Z-Purlin Flange Clip (45°) Hammer-on clip for supporting chains etc. to 45° angled steelwork 1.5-5mm. 4.5mm hole receives hook, chain or nut and bolt connection.

REF

T A B C DØ (mm) (mm) (mm) (mm) (mm)

ZPFC155 1.5-5 o

45

15

53

15

S Kg

6.5

Z-Purlin Flange Clip (45°)/ Threaded Rod Hanger Combination

Z-Purlin Hanger (45°)/ Locking Conduit Clip Combination

Hammer-on 45° Z-Purlin Flange Clip to suit flange thickness 1.5-5mm. Incorporates Threaded Rod Hanger for rod diameters M6, M8, M10 and M12.

RH127 requires nut to secure.

Z-Purlin Hanger incorporating a Locking Conduit Clip. Suits conduit and cable diameters 12-57mm.

Conduit clip turns 360°.

45

DØ T A B (mm) (mm) (mm) C° (mm)

T

A

ZPFC155-RH6T ZPFC155-RH8T ZPFC155-RH10T ZPFC155-RH127

B

D

1.5-5 1.5-5 1.5-5 1.5-5

15 15 15 15

77 77 77 77

45° 45° 45° 45°

M6 M8 M10 12.7

o

45

C

S Kg

45 45 45 45

REF

A (mm)

BØ (mm)

S Kg

ZPH2-LCC1219 ZPH2-LCC1926 ZPH2-LCC2632 ZPH2-LCC3240 ZPH2-LCC4047 ZPH2-LCC4757

Max 3 Max 3 Max 3 Max 3 Max 3 Max 3

12-19 19-26 26-32 32-40 40-47 47-57

45 45 45 45 45 45

45o

Z-Purlin Hanger (45°)

T

A

Z-Purlin Hangers for supporting conduit junction boxes, chains etc. to 45° angled steelwork up to 3mm thick.

REF

A (mm)

B (mm)

CØ (mm)

S Kg

ZPH1 ZPH2

Max 3 Max 3

64 50

6.5 6.5

45 45

C°

A

B

45o A

B

C

ZPH1

A

B

C

ZPH2

D

B

40

Z-PURLIN HANGERS

Z-Purlin Hanger (45°) / Snap-In Conduit Clip Combination (45°)

Z-Purlin Hanger (45°) / Cable Tie Saddle Combination

Z-Purlin Hanger incorporating a Snap-In Conduit Clip.

Suits conduit diameter 18-33mm. Conduit clip turns 360°.

Z-Purlin Hanger incorporating Cable Tie Saddle.

REF

A (mm)

BØ (mm)

U Kg

ZPH2-SICC1825 ZPH2-SICC2229 ZPH2-SICC2933

Max 3 Max 3 Max 3

18-22 22-29 29-33

11 11 11

Z-Purlin Hanger (45°)/ Threaded Rod Hanger Combination Z-Purlin Hanger incorporating Threaded Rod Hanger to suit rod diameter M6, M8, M10 & M12.

REF ZPH2-CTS

A (mm)

U Kg

Max 3

22

o

45

45o

A

REF

A (mm)

BØ (mm)

S Kg

ZPH1-RH6T ZPH1-RH8T ZPH1-RH10T ZPH1-RH127

Max 3 Max 3 Max 3 Max 3

M6 M8 M10 12.7

45 45 45 45

A

45o

A

B

Z-Purlin Hanger (45°) / Height Adjustable Rod Hanger Combination Z Purlin Hanger incorporating a Height Adjustable Threaded Rod Hanger to suit threaded Rod diameters M6, M8 & M10.

REF

A (mm)

BØ (mm)

S Kg

ZPH1-TRH6 ZPH1-TRH8 ZPH1-TRH10

Max 3 Max 3 Max 3

M6 M8 M10

45 45 45

B

A

45o

B

CABLE TIE FIXINGS

Vertical Flange Clip/Cable Tie Saddle Combination Clips for vertical flanges 1.5-7mm thick incorporating Cable Tie Saddle for cable tie attachment

REF VF155-CTS VF155-CTSR VF57-CTS VF57-CTSR

T (mm)

A (mm)

B (mm)

U Kg

1.5-5 1.5-5 5-7 5-7

9 9 9 9

3.5 3.5 3.5 3.5

22 22 22 22

Cable Tie Saddle

Beam Clip/Cable Tie Saddle Combination

Loose Cable Tie Saddle for use as a mounting base for cable ties.

REF

A (mm)

B (mm)

C Ø (mm)

CTS

9

3.5

6.5

Beam Clip to suit horizontal flange from 1.5-20mm with Cable Tie Saddle for cable tie attachment

A B C

REF

T (mm)

A (mm)

B (mm)

U Kg

BC153-CTS BC38-CTS BC814-CTS BC1420-CTS

1.5-3 3-8 8-4 14-20

9 9 9 9

3.5 3.5 3.5 3.5

22 22 22 22

T

T

Large Beam Clip/Cable Tie Saddle Combination A simple cost-effective solution for fixing onto outsized steelwork. Grips firmly onto flanges up to 30mm incorporating Cable Tie Saddle for cable tie attachment.

T (mm) A (mm) B (mm)

REF B

LBC2330-CTS

A

23-30

9

3.5

B

U Kg

20

(Reversed Option)

T

B A

A

41

STRAP HANGERS

Strap Hanger Strap Hanger with 6.5mm diameter hole for fixing to vertical surfaces. Suitable for straps up to 28mm wide.

REF

A (mm)

B (mm)

C (mm)

SH SHR

28 28

6.3 6.3

18 34

DØ (mm)

S Kg

6.5 6.5

90 90

Strap Hanger Clip for fixing onto vertical flanges 1.5-7mm thick. Suits strap width up to 28mm, running parallel to edge of flange.

Angle bracket for soffit fixing, incorporating strap hanger to suit strap width up to 28mm. Two versions available.

T A B C (mm) (mm) (mm) (mm)

VF155-SH 1.5-5 5-7 VF57-SH

C

SH

Right Angle Bracket/Strap Hanger Combination

REF

D

D

Vertical Flange Clip/Strap Hanger Combination

28 28

SHR

6.3 6.3

S Kg

62 62

72 72

REF

A B (mm) (mm) 28 28 28 28

RAB26-SH RAB44-SH RAB26-SHR RAB44-SHR

6.3 6.3 6.3 6.3

C DØ (mm) (mm) 38 54 54 72

6.5 6.5 6.5 6.5

T

C

S Kg

90 90 90 90

D C

B B A

A

Strap Hanger for fixing to horizontal flanges 1.5-20mm thick. Suits strap width up to 28mm, running parallel to edge of flange.

REF

T A B C (mm) (mm) (mm) (mm)

S Kg

BC153-SH BC38-SH BC814-SH BC1420-SH

1.5-3 3-8 8-14 14-20

72 90 90 90

6.3 6.3 6.3 6.3

36 38 46 58

C

B

A

B

Beam Clip/Strap Hanger Combination

28 28 28 28

C

D

B A A

Vertical Flange/Right Angle Strap Hanger Combination Right Angle Strap Hanger for fixing onto vertical flanges 1-7mm thick. Suits strap width up to 28mm, running at right angle to edge of flange.

REF

T A B C (mm) (mm) (mm) (mm)

VF155-SHR VF57-SHR

1.5-5 5-7

6.3 6.3

28 28

C T

77 77

S Kg

72 72

Z-Purlin Hanger 45° / Strap Hanger Combination Z-Purlin Hanger incorporating Strap Hanger Support for strap up to 25mm wide.

REF

A B C D (mm) (mm) (mm) (mm)

S Kg

ZPH1-SH ZPH1-SHR

Max 3 Max 3

45 45

88 115

28 28

6.3 6.3

o

45

A

B

ZPH1-SHR

Beam Clip/Right Angle Strap Hanger Combination

D T

Right Angle Strap Hanger for fixing to horizontal flanges 1.5-20mm thick. Suits strap width up to 28mm, running at right angle to edge of flange.

C

REF

T A B C (mm) (mm) (mm) (mm)

BC153-SHR 1.5-3 3-8 BC38-SHR 8-14 BC814-SHR BC1420-SHR 14-20

28 28 28 28

6.3 6.3 6.3 6.3

58 60 68 80

A

S Kg

72 90 90 90

C

B

ZPH1-SH B D A C

T

C

B

A

42

CLAMPS/MISCELLANEOUS

Ceiling Clip / Spin Nut

Heavy Duty Swivel Hanger

XC25-16S Ceiling Clip is a special centre rotating clamp on clip for ceiling “T” bars. Supplied with 16mm long M6 threaded stud as standard. WN6 spin nuts supplied separately.

Offers high load bearing capacity whilst removing the need to bend threaded rod. Accepts both M8 and M10 rods.

Ref

A (mm)

B (mm)

CØ

XC25-16S WN6

25 -

16 -

M6 M6

REF S Kg

T (mm)

A (mm)

B (mm)

C (mm)

DØ (mm)

EØ (mm)

S Kg

60

71

12

10

M8/M10

200*

HDSH Max 25

22

*Note: Vertical Load

XC25-16S

WN6

B

C

A

6 Nm o 180

S Kg

Max 30

o

A

Right Angle Bracket

D T

Basic bracket for horizontal soffit fixing. 6.5mm hole receives hook, chain or nut and bolt connection.

REF

A B (mm) (mm)

RAB-26 RAB-44

26 44

CØ DØ (mm) (mm)

26 28

6.5 6.5

B 70kg

S Kg

4.6 -

C

D

90 90

Finish: EG C

B

D

E A

D

100kg

B

S Kg

C

RAB-26 C

A

RAB-44 C

250kg

200kg

43

CABLE TRAY - PERFORATED METAL Use with Cab-Strut metal framing to provide multi-directional support for runs of cabling Standard finish (LCT) galvanised (PG) Standard finish (MCT & HCT) galvanised (HDG)

HCT - 76mm deep (2 Slots) MCT - 38mm deep (1 slot)

Other materials & finishes on request LIGHT DUTY CABLE TRAY (LCT) Width Height Material

52 13 1,0

78 13 1,0

103 19 1,0

152 19 1,0

205 19 1,2

230 19 1,2

305 19 1,2

Standard Length: 3000mm (2950 + 50mm Tongue) Slots: 25 x 7mm Pitch: 40 x 12,7mm Accessory Radius: 100mm

MEDIUM DUTY CABLE TRAY (MCT) Width Height Material

76 38 1,6

114 38 1,6

152 38 1,6

229 38 1,6

305 38 1,6

No Splices Required.

Order M6 x 12mm Gutter Bolts & Nuts Separately.

Standard Length: 3000mm Slots: 25 x 11mm Pitch: 38 x 25mm Accessory Radius: 450mm Order splices, screws and nuts separately.

M10 x 20mm Mushroom Head Screws & Nuts (4/Splice)

LCT

For greater widths Heavy Duty Tray is recommended.

HEAVY DUTY CABLE TRAY (HCT) Width Height Material

76 76 1,6

114 76 1,6

152 76 1,6

229 76 1,6

305 76 1,6

457 76 2,0

Standard Length: 3000mm Slots: 25 x 11mm Pitch: 38 x 25mm Accessory Radius: 450mm Order splices, screws and nuts separately.

M10 x 20mm Mushroom Head Screws & Nuts (4/Splice)

610 76 2,0

Light Duty Cable Tray (LCT)

Typical Cantilever Arm Installation

Standard Accessories

Typical Trapeze Installation For product masses see page 54

Horizontal Bend 90째

Tee

4 Way Crossover

External Elbow (Dropper)

Angle Splice (Medium Duty) Centre Splice (457mm Wide & Upward Only)

Internal Elbow (Riser)

Angle Splice (Heavy Duty) Reversible Reducing Splice

Closed Cover (1,5m Long) Covers for standard accessories also available ALL COVERS MADE TO ORDER

44

RETURN FLANGE CABLE TRAY Worldwide standard design Lighter, stronger and more cost effective Reduced installation times and costs Standard finish galvanised (PG) Other materials and finishes on request

Standard Length: Slot Size (Longitudinal): (Lateral) Fasteners:

3000mm 25 x 7,5mm 20 x 11mm M6 x 16 Cup Sq. Screw, Nut & Washer

50-225 1,0 1,0

Width (mm) Straight Tray Standard Accessory

RFMD/STR Medium Duty Return Flange Tray

600

RFHD HEAVY DUTY

RFMD MEDIUM DUTY

Material Thicknesses 300 1,2 1,2

450 1,5 1,2

600 1,5 1,2

750 1,5 1,5

900 1,5 1,5

10 10

11 11

27

RFHD/STR Heavy Duty Return Flange Tray

250

250

200

200

Length 3000mm

50

Length 3000mm

"Built-in" coupler (splice) on all standard accessories reduces installation time.

300 600

150

300

Load kg/m

150

150

150

Load kg/m 100

100

50

1,0

SPAN 1,5

2,0

50

1,0

SPAN 1,5

2,0

Standard Accessory Radii: Horizontal Bends, Tees and 4 Way Crossovers: 50 - 225mm wide = 125mm 300mm wide = 150mm 450 - 900mm wide = 200mm Variable Risers: All widths = 240mm

For Load Chart Parameters see page 54.

Standard Accessories Horizontal Bend 90째

For product masses see page 54

Tee

Variable Internal Riser & External Dropper from 0째-90째

Wrap Over Coupler (200mm)

Fishplate Coupler Straight Couplers 200 x 45mm 200 x 20mm Divider (Straight Tray) Dividers also available for Standard Accessories

135

Wall Mounting Plate W

Tray Arm W (up to 150mm)

W 50

Horizontal and Vertical Adjustable Couplers

W 145mm

W

Tray Standoff Bracket

4 Way Crossover

Trapeze Hanger Bracket

W (up to 300mm)

Open Hanger Bracket

Reversible Reducing Coupler (150, 300 & 450mm) Closed Cover (1,5m Long) Covers for standard accessories also available ALL COVERS MADE TO ORDER

45

CABLE TRAY - WELDED WIRE MESH 3000mm standard length Pitch 100 x 50mm & 50 x 50mm Standard finish - Hot Dip Galvanised (HDG) WWMD/WWHD

Hold down saddle & joiner clamp set galvanised (HDG) Other materials and finishes on request

ON SITE FABRICATION On site fabrication is simple using bolt cutters. Trays can be cut to suit required radius.

MEDIUM DUTY CABLE TRAY (WWMD) Width mm Joiner Sets Req. Height: 50mm Wire Ø: 4,0mm

50 2

100 3

150 3

200 3

300 3

400 4

500 4

600 4

Sidewalls: 2 longitudinal wires at 25mm centres

HEAVY DUTY CABLE TRAY (WWHD) Width mm Joiner Sets Req. Height: 75mm Wire Ø: 5,0mm

100 150 200 300 400 500 600 800 1000 3 3 3 3 4 4 4 5 5

Sidewalls: 3 longitudinal wires at 25mm centres

Accessory Radius: 450mm or 160mm (WWMD only).

Order joiner sets separately.

WWMD Wire Mesh Tray

WWHD Wire Mesh Tray

150

400

CLIP-ON SUPPORT CHANNEL Horizontal or vertical installation No saddles required

300

Load kg/m 50/600mm

Load kg/m 200

100/200mm

SPAN 1,5

2,0

1200mm standard length Material Thickness: 1,6mm

300/1000mm

75

1,0

Bend over tabs to secure

1,5

100

SPAN 2,0

3,0

For Load Chart Parameters see page 54.

Standard Accessories - 50x50mm Pitch Horizontal Bend 90°

For product masses see page 54 Tee 2 Part Joiner Clamp (includes integral nut & bolt)

Internal Elbow (Riser)

Unique Flush Hold Down Saddle (8,5mm Slot)

(Saddle tongues locate below cross wires) External Elbow (Dropper) 4 Way Crossover

4 Part Joiner Clamp Set (includes M6 x 16mm Screw & Nut)

46

CL LADDER - CL55/76 Standard Length: Rung Spacing: Slot Size CL55: CL76: Cross Rung Thickness: Std. Accessory Radius:

Standard finish galvanised (HDG) Welded construction Special materials & coatings on request

3000mm 375mm 17 x 7mm 25 x 7mm 1,6mm 450mm 45

17

8

17

CL55 LIGHT DUTY CABLE LADDER 100 CL55 1,6

Width Rung Type Side Rail Thickness

150 CL55 1,6

200 CL55 1,6

300 CL55 1,6

400 CL55 1,6

500 CL55 1,6

8 8

13

Side Rail

100 150 200 300 400 500 600 800 1000 Width CL76 CL76 CL76 CL76 CL76 CL76 CL76 HCL HCL Rung Type Side Rail Thickness 1,6 1,6 1,6 1,6 1,6 2,0 2,0 2,0 2,0

CL55 Load kg/m

76

45

Side Rail

HCL Cross Rung

23

18

Adjustable CL55 & CL76 Splice Sets comprise: 4 x Plates, 8 x M6 x 16 Cup Sq. Screws, Nuts & Washers, 4 x M8 x 20 Hex. Screws, Nuts & Washers

CL55 & CL76 VARIABLE INT/EXT KIT COMPRISING:

400

200

18

23

CL55 & CL76 Splice sets comprise: 2 x Plates, 8 x M6 x 16 Cup Sq. Screws, Nuts & Washers

CL76 Load kg/m 400

55

45

CL55 Cross Rung

CL76 MEDIUM DUTY CABLE LADDER

CL76 Cross Rung

8

2 x Side Pieces, 6 x M6 Cup Sq. Bolts, Nuts & Washers & 2 x M8 x 20 Screw & Nut + Washers Cross Rungs from 100-1000mm Supplied Separately

300

100/500mm

150

300/1000mm

200

Specifically designed for horizontally oriented installations.

100 100/200mm

100

50

1,0

SPAN 1,5

2,0

1,5

SPAN 2,0

3,0

For Load Chart Parameters see page 54.

1 x Side Piece = 440 Radius 2 x Side Pieces = 650 Radius 3 x Side Pieces = 1000 Radius Use to create infinite directional changes

Standard Accessories (suitable for all ladders) Accessory Radius: 450mm. Other radii to order

For product masses see page 54

CL55 Splices Internal Elbow (Riser)

Tee

Horizontal Bend 90째

CL76 Splices

Cable Cover Clamp

Width Reducing Splice

Adjustable Splice

External Elbow (Dropper)

P1450 Cable Ladder Hold-down Bracket

4 Way Crossover

Closed Cover (1,5m Long) Covers for standard accessories also available ALL COVERS MADE TO ORDER

47

POWERWAY CABLE LADDER - PW75/100 Standard Length: Rung Spacing: Slot Size : Material - Side Rail: (3,0mm Side Rail to Order) Cross Rung: Standard Acc. Radius:

Standard finish galvanised (HDG) Welded construction 150mm depth also available Special materials & coatings on request

3000mm 300mm 25 x 7mm 2,0mm 2,0mm 450mm

9 43

150

200

300

400

500

600

800

1000

100

Side Rail

Side Rail

45 23

PW75 & PW100 Splice sets comprise: 2 x Plates, 16 x M8 x 16 Cup Sq. Screws, Nuts & Washers

PW Cross Rung

Adjustable PW75 & PW100 Splice Sets comprise: 4 x Plates, 16 x M8 x 16 Cup Sq. Screws, Nuts & Washers, 4 x M8 x 20 Hex. Screws, Nuts & Washers

PW75 Load kg/m

18

75

PW75 & PW100 POWERWAY Width

9 43

18

45

23

23

PW Cross Rung

23

ANGLEWAY CABLE LADDER (Light, Medium & Heavy Duty)

PW100 Load kg/m 400

400

300/1000mm

300/1000mm

200

300 100/200mm 100/200mm

150

Standard finish galvanised (HDG)

200

100 100

1,5

SPAN 2,0

3,0

GENERAL STRUCTURAL STEEL

50

2,0

SPAN 2,5

Welded construction

Specifically designed for side oriented installations.

Standard Length: 3000mm Side Rail Profile: Light Duty: 25 x 25 x 2,5mm Medium Duty: 40 x 40 x 3,0mm Heavy Duty: 50 x 50 x 4,0mm Rung profile & spacing to order

6000mm standard length. Standard finish HDG. Stainless steel prices available on request.

3,0

FLAT BAR 25 x 5 30 x 5 40 x 5 50 x 5

For Load Chart Parameters see page 54.

ANGLE IRON 25 x 25 x 3 25 x 25 x 5 30 x 30 x 3

TAPER FLANGE CHANNEL

30 x 30 x 5 40 x 40 x 5 50 x 50 x 5

76 x 38 100 x 50 x 6 STD 100 x 50 x 6 SL

Standard Accessories (suitable for all ladders) Accessory Radius: 450mm. Other radii to order

For product masses see page 54

PW75 Splices Internal Elbow (Riser)

Tee

Horizontal Bend 90째

PW100 Splices

Cable Cover Clamp

Width Reducing Splice

Adjustable Splice

External Elbow (Dropper)

P1450 Cable Ladder Hold-down Bracket

4 Way Crossover

Closed Cover (1,5m Long) Covers for standard accessories also available ALL COVERS MADE TO ORDER

48

CL130 CABLE LADDER Standard Length: 6000mm 5800mm manufactured to order Rung Spacing: 300mm Slot Size: 25 x 11mm Std. Acc. Radius: 650mm

Standard finish galvanised (HDG) Welded construction Special materials & coatings on request

19 10 130

45

CL130 CABLE LADDER Width Rung Type

150 HCL

200 HCL

300 HCL

400 HCL

500 HCL

600 HCL

800 HCL

1000 HCL

23

HCL Cross Rung

Side Rail

25

Designed to meet NEMA Classification 20B = 1,6mm thick 20C = 2,0mm thick

National Electrical Manufacturers Association

Deflection 1/150 Deflection 1/200

Side Rail 1,6mm Load kg/m

Side Rail 2,0mm Load kg/m

400

400 1/150

300

300

200

200

Specifically designed for horizontally oriented installations.

1/150

1/200

100

4,0

SPAN (Metres) 6,0 5,0

100

4,0

SPAN (Metres) 6,0 5,0

Wraparound CL130 Splice manufactured from 2,0mm galvanised steel (HDG)

For Load Chart Parameters see page 54.

Standard Accessories (suitable for all ladders) Accessory Radius: 650mm. Other radii to order

For product masses see page 54

CL130 Splices Internal Elbow (Riser)

Tee CL130 Splices

Horizontal Bend 90째

Width Reducing Splice

Adjustable Splice

External Elbow (Dropper)

P1450 Cable Ladder Hold-down Bracket

4 Way Crossover

Closed Cover (1,5m Long) Covers for standard accessories also available ALL COVERS MADE TO ORDER

49

WIRING DUCT - LAY-IN WIRING RETICULATION All Cabstrut Ducting, Splices and Accessories are prepunched with fixing holes that make installation a whole lot easier and quicker SAVING YOU TIME AND THAT MEANS MONEY! Secondly NO POWER REQUIRED when running full lengths, just a rivet gun and the correct sized rivets.

And to make life even easier, the pre-punched holes are slotted so there's no need to struggle locating the rivet* especially when the duct isn't straight and level.

Trunking & Ducting Certification Approved IN ACCORDANCE WITH SANS 61084-1

Comes as standard on: P8200 / P8300 / P8000 / P7810 / P9000 / P9800 / P9810 No pulling of cables necessary, all accessory covers are fitted after the wiring is complete!

ONE SPLICE SUITS ALL DUCT SIZES (Not suitable for P8100 Duct)

Suitable for all reticulation including lighting Can be customised for special projects New universal splices suitable for all duct sizes from 76x50 to 127x100. Simply bend on site for smaller profiles.

TM

Traditional U shaped FOLD-FROM-FLAT splices are also prepunched and available as an option.

P8300 - 5A Socket outlets at 1500mm staggered centres.

Other centres to order. P9000, P7100, P8000 and P8300 can be manufactured to order with various outlets, e.g. 16A switched, 16A unswitched, 5A, 13A, etc. at centres specified.

P2200 - 20mm knockouts staggered on both sides at 150mm centres.

P8300

Capacity of Wireways Ducting vs. Conduit DERIVED FROM SABS 0142-1981 DUCTING TYPE

P3300 P4000 P1000 P2000 P2200 P8100 P8200 P8300 P8000 P7000 P9000

P2200

Duct Covers

EQUIVALENT No. OF CONDUITS 20Ø

25Ø

32Ø

40Ø

50Ø

3 4 7 8 12 9 18 23 27 34 46

2 2 5 5 8 6 11 14 17 21 29

1 2 3 3 5 4 7 9 11 13 18

1 2 2 3 2 4 5 7 8 11

1 1 2 2 3 4 4 5 7

Standard finish (duct and cover): Galvanised (PG) Covers are also available in grey and white PVC P7184 and P2200 covers in (PG) only

Wiring Duct Sizes 22

P1000 41 x 41 x 2,5 Std. Length 5m

P1184 Cover

40 x 2500mm x 0,5

34

22

51 51

22

22

P2000 41 x 41 x 1,0 P2000 41 x 41 x 1,5

P4000 41 x 20 x 1,5

P3300 41 x 20 x 2,5

P2200 51 x 51 0,8

P8100 76 x 25 x 0,8

P8200 76 x 51 x 0,8

P1184 Cover 40 x 2500mm x 0,5

P1184 Cover

40 x 2500mm x 0,5

P1184 Cover

Biscuit Tin Lid

P8184 Cover

P8184 Cover

Std. Length 5m

Std. Length 5m

Std. Length 5m

40 x 2500mm x 0,5

Std. Length 3m

52 x 3000mm x 0,8

Std. Length 3m

75 x 3000mm x 0,5

Std. Length 3m

75 x 3000mm x 0,5

For product masses see page 54

51

51

51

102

51

51

1.0mm TO ORDER ONLY

P8300 76 x 63 x 0,8

P8000 76 x 76 x 0,8

P7810 100 x 76 x 0.8

P9810 127 x 100 x 0.8

P9000 127 x 76 x 0.8

P9800 127 x 76 x 0.8

P8184 Cover

P8184 Cover

P8184 Cover

P8184 Cover

P9184 Cover

P8184 Cover

Std. Length 3m

75 x 3000mm x 0,5

Std. Length 3m

75 x 3000mm x 0,5

Std. Length 3m

75 x 3000mm x 0,5

Std. Length 3m

75 x 3000mm x 0,5

Std. Length 3m

125 x 3000mm x 0,5

Std. Length 3m

75 x 3000mm x 0,5

50 Powder Coated on request.

Trunking & Ducting Certification Approved IN ACCORDANCE WITH SANS 61084-1

Cabstrut FOLD-FROM-FLATTM Accessories Hand made on-site in seconds Accessories are easy to use and take up virtually no space in your store Fold upwards towards raised bubbles Bend-over tabs lock cover in place Accessories for all ducts are available Standard finish: Galvanised (PG) Fold From Flat Accessories External Elbow

Internal Elbow

3 Way Tee

Horizontal Elbow

4 Way Crossover

Standard Splice

End Cap

Universal Splice

Fold From Flat Radiused Accessories (Complete With Cover) External Elbow

Internal Elbow

Horizontal Elbow

Tee Radiused

Crossover Radiused

Hanger

Distribution Outlet

Standard Solid Accessories External Elbow

Internal Elbow

Horizontal Elbow

3 Way Tee

4 Way Crossover

Standard Splice

Hanger

End Cap

LIGHTING & CEILING SUPPORT Fit standard adaptors at any point along the duct (22mm width opening) length. Hollow adaptor serves as a conduit Standard Accessories

P2540 Nylon (Including Nut) (M20)

P1200 Top Hat 2400 mm

HDSH Heavy Duty Swivel Hanger Purlin Clamp M6/M8 M10 & M12

P2540 Brass (M20)

Fluorescent Fitting

Hanger P1272/U Accepts Threaded Rod 10 Ă˜ Max.

Flange Clamp 6, 8, 10 or 12mm

PVC End Caps P1000, P2000, P3300 & P4000 only

51

PVC TRUNKING

Standard Accessories

Internal Angle Trunking & Ducting Certification Approved IN ACCORDANCE WITH SANS 61084-1

1

2

3

Stop End

5 4

6

External Angle

7

8

9

10

COMPACT MINI TRUNKING Colour - white Installation is easy, neat and affordable with a wide range of accessories.

Flat Angle

Tee Unit

NBT/4 Socket Outlet Cover 15A 6896H

1. NBT/5 2. NBT/4 Divider 3. NBT/4 4. YT/5 5. YT/4 Divider 6. YT/4 7. YT/3 8. YT/2.5 9. YT/2 10. YT/1

100 x 50 x 3000mm 33 x 12 x 3000mm 100 x 40 x 3000mm 40 x 40 x 3000mm 20 x 14 x 3000mm 40 x 25 x 3000mm 40 x 16 x 3000mm 25 x 25 x 3000mm 25 x 16 x 3000mm 16 x 16 x 2000 & 3000mm

Full range of accessories for a professional finish.

For product masses see page 54

CABLE LINE TRUNKING Standard Accessories CABLE LINE TRUNKING Colour - grey and white

External Angle

Internal Angle

Complete range of accessories for a professional finish.

1. CLT/6 100 x 100 x 3000mm 2. CLT/5 100 x 75 x 3000mm 3. CLT/4 100 x 50 x 3000mm 4. CLT/3 75 x 75 x 3000mm 5. CLT/2 75 x 50 x 3000mm 6. CLT/1 50 x 50 x 3000mm

Flat Angle

Tee Unit

1 2 Stop End

3 4

5

6

SLOTTED PVC TRUNKING Standard Length: 2000mm Colour: RAL 7030 grey SABS approved Shock resistant and self-extinguishing thermoplastic that conforms with UL 94 VO Conforms to RoHs directive Lead-free material Base punching configuration to DIN 43659 Coining on all sizes that creates burr-free edges to reduce abrasion to hands and cables Pre-scored line at base as well as each finger to make a clean, precise opening for passing cables

Code

Size (W x H)

Code

Size (W x H)

Code

Size (W x H)

i0005763 i0005764 i0005765 i0005766 i0005767

25 x 25mm 25 x 40mm 25 x 60mm 25 x 80mm 40 x 40mm

i0005768 i0005769 i0005770 i0005771 i0005772

40 x 60mm 40 x 80mm 60 x 40mm 60 x 60mm 60 x 80mm

i0005773 i0005774 i0005775 i0005776

80 x 40mm 80 x 60mm 100 x 60mm 100 x 80mm

Trunking & Ducting Certification Approved IN ACCORDANCE WITH SANS 61084-1

For product masses see page 54

PVC FLOOR (HALF MOON) TRUNKING Standard Length: 2000mm Standard Colour: Grey

SABS approved Shock resistant and selfextinguishing thermoplastic that conforms with UL 94 VO

12 48 18

Conforms to RoHs directive

70

Lead-free material

Code

Size (W x H)

i0005778 48 x 13mm i0005777 70 x 18mm i0006308 48mm End cap i0006309 70mm End cap

For product masses see page 54

CORNICE (TRIANGULAR) TRUNKING Standard Length: 3000mm Standard Colour: White

55

SABS approved Shock resistant and self-extinguishing thermoplastic that conforms with UL 94 VO

30

Lead-free material

Code i0005927 i0005928 i0005929 i0005930 i0005931 i0005932

Description Duct & Cover Divider Int. Elbow Ext. Elbow Int. TEE End Cap

For product masses see page 54

Int. Elbow

Ext. Elbow

Int. TEE

52

53

PVC & GALVANISED STEEL CONDUIT & FITTINGS

Straight Conduit

Conduit Box - 1 Way Side Entry

Standard Length: 4000mm

STEEL

PVC

SABS APPROVED

Code i0005974 i0005975 i0005976 i0005977 i0005978

Size Ø 20mm 25mm 32mm 40mm 50mm

GALV. PLAIN END

Code i0005933 i0005934 i0005935 i0005936 i0005937

Size Ø 20mm 25mm 32mm 40mm 50mm

Conduit Box - 2 Way Angle

STEEL

PVC Code i0005987 i0005988

Size Ø 20mm 25mm

Conduit Box - 2 Way Through

Code i0005940 i0005941

Size Ø 20mm 25mm

Conduit Box Loop-in 4 Outlets

PVC Code i0005979 i0005980

Size Ø 20mm 25mm

STEEL Code i0005938 i0005939

Size Ø 20mm 25mm

Conduit Box - 3 Way Side Entry

PVC Code i0005983 i0005984

Size Ø 20mm 25mm

STEEL Code i0005944 i0005945

Size Ø 20mm 25mm

90° Solid Bend

STEEL

PVC Code i0005981 i0005982

Size Ø 20mm 25mm

Code i0005942 i0005943

Size Ø 20mm 25mm

Conduit Box - 4 Way Side Entry

STEEL

PVC Code i0005983 i0005984

Size Ø 20mm 25mm

Code i0005946 i0005947

Size Ø 20mm 25mm

Solid Coupling

STEEL Code i0005950

Size Ø 20mm

PVC Conduit Box Lids Code i0006005 i0006006 i0006007

PVC Size Ø Std O/S Sw.

PVC Spacer Saddle Bar

Code i0005989 i0005990 i0005991 i0005992 i0005993

Size Ø 20mm 25mm 32mm 40mm 50mm

Hospital Saddle

Size Ø 20mm 25mm 32mm 40mm 50mm

Male Adaptors

Code i0006013 i0006014

Size Ø 20mm 25mm

Code i0006008 i0006009 i0006010 i0006011 i0006012

Size Ø 20mm 25mm 32mm 40mm 50mm

PVC PVC Strap Saddle

STEEL Code i0005952 i0005953 i0005954 i0005955 i0005956

Size Ø 20mm 25mm 32mm 40mm 50mm

Code i0005999 i0006000 i0006001 i0006002 i0006003

Size Ø 20mm 25mm 32mm 40mm 50mm

Pipe Benders Code i0005972 i0005973

Size Ø 20mm 25mm

STEEL

PVC Code i0005994 i0005995 i0005996 i0005997 i0005998

Size Ø 20mm 25mm 32mm 40mm 50mm

Code i0005957 i0005958 i0005959 i0005960 i0005961

Size Ø 20mm 25mm 32mm 40mm 50mm

Female Adaptors

STEEL Code i0005962 i0005963 i0005964 i0005965 i0005966

Size Ø 20mm 25mm 32mm 40mm 50mm

STEEL

PVC Code i0006004

Size Ø 20mm

Code i0005967 i0005968 i0005969 i0005970 i0005971

PVC Bonding Fluid Code i0006019 i0006020

Size 100ml 200ml

Size Ø 20mm 25mm 32mm 40mm 50mm

PRODUCT MASSES

LOAD CHART PARAMETERS FOR CABLE TRAY & LADDER

The loading curves give an indication of the likely performance of the product over a number of spans.

This information is based on physical test results with joints at mid-span (worst position).

54

Deflection does not exceed a deflection standard of span over 200 unless otherwise stated.

Due to material and manufacturing tolerances, test results can vary per individual length. The data shown is typical and given for guidance only. No guarantee can be offered that installed product will match the test results exactly and accept no liability for product supplied not matching these figures.

Cabstrut reserves the right to change the design of any of its products. This may consequently affect the sizes & masses of the products.

TECHNICAL INFORMATION

VOLTEX HEAD OFFICE (011) 879-2000

WHOLESALE DISTRIBUTORS NORTHERN CAPE VOLTEX Kimberley (053) 832 1211/2/3/4 Upington (054) 332 6211/1874

EASTERN CAPE VOLTEX Umtata (047) 532 4706 East London (043) 743 3650 Port Elizabeth (041) 504 8200

(044) 382 1242 Mossel Bay (Depot) (044) 695 0010 Overstrand (Depot) (028) 312 3366 Paarl (021) 872 1554/5 Strand (021) 853 8511 MPUMULANGA Vredenburg (Depot) VOLTEX Lydenburg (Sales Office) (022) 713 2371/2946 (013) 235 4706 Wetton (Depot) Nelspruit (021) 761 4599 (013) 753 3641/2/3/4 Worcester (Depot) Witbank (023) 342 1795 (013) 692 8536 WESTERN CAPE BELLCO (021) 440 7100 VOLTEX Blackheath (Depot) (021) 905 1877 Brackenfell (Depot) (021) 982 1404 Cape Town (021) 531 2033 City Centre (Depot) (021) 462 4058 George (044) 871 2006 Knysna (Depot)

KWA-ZULU NATAL VOLTEX ELECTRICAL Ballito (Depot) (032) 946 3966 Briardene (031) 573 9200 Durban (031) 310 7900 Newcastle (034) 315 4150 Pietermaritzburg (033) 342 9773 Pinetown (031) 702 0831

GAUTENG ELECTRIC CENTRE Pretoria (012) 322 1641 KEENS ELECTRICAL Montana (012) 548 6737/8/9 VOLTEX Alberton (011) 907 3752/6 Bramley (011) 887 1308/9 Centurion (012) 653 3090 Denver (011) 616 6269 East Rand (011) 918 5220 Kempton (011) 970 3290 Midrand (011) 315 5800 Pretoria (012) 330 0211 Randburg

SPECIALIST DIVISIONS

(011) 792 3380 Reuven (011) 434 3800 West Rand (011) 951 5780 FREE STATE VOLTEX Welkom (057) 396 3191 Bloemfontein (051) 505 0700 NORTH WEST VOLTEX Klerksdorp (Depot) (018) 462 9945/6/7 Potchefstroom (018) 297 5520 Rustenburg (014) 597 1311 LIMPOPO VOLTEX Lephalale (Ellisras) (014) 763 2215 Phalaborwa (015) 781 6409 Polokwane (015) 297 6177 Tzaneen (015) 307 1213/4

www.cabstrut.co.za

CABSTRUT BRANCHES JOHANNESBURG 350 Main Reef Road Denver Tel: 011-622-8633 Fax: 011-622-6122 cabstrut@voltex.co.za

PRETORIA 636 Ella Street Rietfontein Tel: 012-329-6882 Fax:012-329-2220 cabpta@voltex.co.za

DURBAN 2 Brickworks Way Briardene Tel: 031-573-9400 Fax: 031-564-1935 cabdurban@voltex.co.za

CAPE TOWN Unit 2A Ndabeni Business Park Cnr Inyani & Old Mill Rd Tel: 021-530-3560-6 Fax: 021-531-0952 cabcape@voltex.co.za

EAST LONDON W.J. Agencies 37 Patterson Street, Arcadia Tel: 043-722-6272 043-722-6282 Fax: 043-722-6098

VOLTEX LSIS (011) 314 0620/1 CABSTRUT Bloemfontein (051) 430-7269 Cape Town (021) 530 3560-6 Durban (031) 573 9400 East London (043) 722 6272 George (044) 874 5549 Johannesburg (011) 622 8633 Port Elizabeth (041) 451 2011 Pretoria (012) 329 6882 VERSALEC CABLES (PTY) LTD (011) 314 0220 ATLAS CABLE SUPPLIES Alrode (011) 864 5255

Bloemfontein (051) 448 0738/40 Polokwane (015) 292 3330/4 WACO RETAIL Durban (031) 573 9350 East London (043) 743 3650/5201 Cape Town (021) 534-3979 Rayton (012) 734 5586 WACO INDUSTRIES Bloemfontein (Depot) (051) 448 0996 Cleveland (011) 677 2500 Cape Town (021) 593 1114 Durban (031) 319 5400 Port Elizabeth (041) 374 1687 VOLTEX LIGHTING Johannesburg (011) 402 0251

Trunking & Ducting Certification Approved IN ACCORDANCE WITH SANS 61084-1

Certificates available on request

PORT ELIZABETH W.J. Agencies 13 Davies Street, Sidwell Tel: 041-451-2011 Fax: 041-451-2040 GEORGE Tel: 044-874-5549

BLOEMFONTEIN 15 B Kraal Street Old East End Bloemfontein 9300 Tel 051 430-7269 Fax 051 430-7270

BOTSWANA TNS Maintenance Plot 151, Unit 3, International Com. Park Tel: (00267) 392-2868 (00267) 391-5293 Cell: (00267) 723-5063