CBi Electric: Low Voltage Catalog 2014 by Alf Allingham

price list

price list price list

price list

price list price list

price list

price list price list price list

price list price list

price list

price list price list price list price list

price list

Wiring Accessories price list Surge Protection Devices

priceprice list list price list

Circuit Breakers for Equipment Miniature Circuit Breakers Earth Leakage Devices Metering Devices Moulded Case Circuit Breakers Air Circuit Breakers Motor Control Devices

price list price list

2013 / 2014

price list

price list price list

price list

price list price list

price list

ORDERING INFORMATION

All prices are in Rand. Prices are subject to variation.

Price List reflects VAT exclusive.

Discounts and ordering criteria are subject to conditions as per the official stockist policy.

For non-standard ampere ratings prices available on request (POR).

Prices invoiced will be ruling prices at date of dispatch of goods.

SPECIFICATIONS Avoid delays in delivery by always specifying the following: 1.

Exact frame size of circuit breaker or switch disconnector and number of poles.

Ampere rating applicable to either the circuit breaker or switch disconnector should be clearly stated. The standard ampere ratings applicable to the various circuit breakers are detailed in our catalogue.

The time delay curve desired and the breaking capacity.

Note: Unless specified to the contrary, circuit breakers will be supplied with the standard time delay curve as indicated in the catalogues. 4.

Voltage - in all cases state whether the voltage is DC or AC.

Types of terminals need only be specified where they differ per pole from terminal types listed in this price list.

For multipole circuit breakers, specify requirements per individual pole.

When ordering accessories, stipulate voltage if applicable.

HANDLE COLOUR CODING PRODUCT TYPE Circuit Breakers Curve One Circuit Breakers

MCB White Orange

MCCB (hydraulic-magnetic) White -

MCCB (thermal-magnetic) (Mitsubishi) Black -

MCCB Black -

Switch Disconnector

Green

Red

DC Circuit Breaker

White/Grey

Orange

Note: Due to constant research and development, CBI reserves the right to make modifications and change without prior notice. For further detailed information visit www.cbi-electric.com Circuit Breaker Industries Ltd T/A CBI-electric: low voltage

Should you experience any â&#x20AC;&#x153;stock-outsâ&#x20AC;? in your area, contact us directly on our new HOTLINE number 0860 BREAKR (273 257)

INDEX

WIRING ACCESSORIES Light Switches and Grid Plates

Switched, Unswitched and Dedicated Switched Socket Outlets

Dedicated, Surface Mount Outlet Boxes, Switch Disconnectors

TV & Telephone Socket Outlets, Bell Push, Neon, TV, DSTV, Telephone

Switch Inserts, Dimmer Switch and Dimmer Module

Colour Options

Technical wiring diagrams

SURGE PROTECTION DEVICES Clip-In Dual Mount Surge Protection Devices

CIRCUIT BREAKERS FOR EQUIPMENT (CBE) B Frame, C Frame, D Frame, DD Flush Rocker, J Series and L Series

QDC (80/125 V DC)

MINIATURE CIRCUIT BREAKERS (MCB), EARTH LEAKAGE UNITS (ELU), SURGE AND AUXILIARY PRODUCTS MCB Residential Circuit Breakers and Switch Disconnectors QA (13) - Hydraulic Magnetic

MCB Commercial / Industrial Circuit Breakers and Switch Disconnectors QF (13) - Hydraulic Magnetic

QF (26) - Hydraulic Magnetic

QF (18) DIN - Hydraulic Magnetic

QF (18) DIN - Thermal Magnetic

QF (27) DIN - Thermal Magnetic

Commercial / Industrial Circuit Breakers and Switch Disconnectors and Eart Leakage Protection Devices QF DIN - Earth Leakages

QH (18) DIN QH (27) DIN

17 18

QH DIN - Earth Leakages

Residential / Commercial & Industrial Clip-In Earth Leakage Protection Devices SF, QA and QF

Commercial / Industrial Earth Leakage Protection Devices SF and SM

MCB ACCESSORIES MCB Accessories

Auxiliary Products

Ready Boards

Distribution Boards

INDEX

METERING PRODUCTS Rail Mount Meters

26 - 27

Rotating Disc Meters

MOULDED CASE CIRCUIT BREAKERS JS / JSN and Accessories

LB / LBN and Accessories

MB / MBN and Accessories

Thermal - Magnetic Range CBI MCCBs and Switch disconnectors (16-250 A) FD / FDN / GD / GDN

GD/FD Accessories

F65DV Accessories

MCCBs and Switch Disconnectors (250A-1600 A) KD, KDN (Thermal - Magnetic) and KDE (Electronic)

Accessories

LDE, LDN and Accessories

NDE & NDN and Accessories

Special Traction DC Breakers JSDC

Integral Earth Leakage Circuit Breakers 25 kA-35 kA ELFD and ELKD

Industrial and Mining Earth Leakage Relays

Earth Leakage Relays, Hospital Monitors, Portable Units

Mitsubishi Electric MCCBs, ELCBs and Switch Disconnectors (16-250 A) World Super Series MCCBs (16-125) NF125, (150-250) NF250

World Super Series ELCBs (16-125) NV125, (150-250) NV250

World Super Series Accessories

43 - 44

Mitsubishi Electric MCCBs, ELCBs and Switch Disconnectors (DSN) World Super Series MCCBs (200-1600 A) NF

World Super Series ELCBs (250-800 A) NV

World Super Series Accessories

47 - 48

MITSUBISHI AIR CIRCUIT BREAKERS Air Circuit Breakers and Switch Disconnectors

Accessories

MOTOR CONTROL Magnetic Contactors Series S-N

Accessories

52 - 54

55 - 56 57

Electronic Motor Protection Relays Type ET-N Medium Voltage Vacuum Contactors Series SH-V

Spares and Accessories

Series VZ-D

Spares and Accessories

Terminal Blocks Series TEK

61 TECHNICAL SECTION: CIRCUIT BREAKERS

MCBs and Accessories Data

MCB Dimensions

MCCBs and Accessories Data

Terminations

Cascading Tables

Cascading Table No. 1

Cascading Table No. 2

Motor Starting Guide: 230-400 V

Motor Starting Guide: 400-525 V

Motor Starting Guide: 525-1000 V

MS-N Series Quick Reference Guide

72 - 73

Circuit Breaker Selection for Capacitor Circuits

Terms & Conditions of Sale

Circuit Breaker Industries Product Warranty

iii

INDEX

Thermal Overload Relays Series TH-N Accessories

WIRING ACCESSORIES

2 x 4 LIGHT SWITCHES (250 V AC, 16 A, IP20) CATALOGUE NO.

DESCRIPTION

PACK SIZES

L120-P L121-P L122-P L123-P L124-P L125-P

One lever switch (1-way) complete with surround One lever switch (2-way) complete with surround Two lever switch (1-way) complete with surround Two lever switch (2-way) complete with surround Three lever switch (1-way) complete with surround Four lever switch (1-way) complete with surround

4 x 4 LIGHT SWITCHES (250 V AC, 16 A, IP20) CATALOGUE NO.

DESCRIPTION

L126-P L127-P

Four lever switch (1-way) complete with surround Six lever switch (1-way) complete with surround

10 10 10 10 10 10

L120 / L121-P

WHITE OPTION SILVER SHIMMER PRICE EA. PRICE EA. 59.00 24.00 62.00 27.00 32.00 67.00 42.00 77.00 43.00 78.00 49.00 85.00

L122 / L123-P

PACK SIZES 10 10

L126-P

CATALOGUE NO.

DESCRIPTION

PACK SIZES

G000-P G001-P G002-P G003-P G009-P S013-P

Grid plate (1 lever) with surround Grid plate (2 lever) with surround Grid plate (3 lever) with surround Grid plate (4 lever) with surround Grid plate (Blank) with surround Surround

G000-P

CATALOGUE NO.

DESCRIPTION

G010-P S014R-P

Grid plate (Blank) with surround Surround

25 25 25 25 25 25

G001-P

G002-P

25 25

G009-P

S013-P

WHITE OPTION SILVER SHIMMER PRICE EA. PRICE EA. 54.00 18.00 11.00 NO COLOUR

G010-P Should you require a special combination please contact CBI. Refer to Page 5 for colour options.

L127-P

WHITE OPTION SILVER SHIMMER PRICE EA. PRICE EA. 16.00 51.00 16.00 47.00 16.00 47.00 16.00 51.00 13.00 48.00 7.00 NO COLOUR

G003-P

PACK SIZES

L125-P

WHITE OPTION SILVER SHIMMER PRICE EA. PRICE EA. 110.00 63.00 127.00 80.00

2 x 4 GRID PLATES

4 x 4 GRID PLATES

L124-P

S014R-P

CATALOGUE NO.

DESCRIPTION

PACK SIZES

PS672-P PS673-P PS681-P

Single switched socket outlet, Vertical Single switched socket outlet, Horizontal SA/Euro combined socket outlet, Vertical

5 5 5

4 x 4 SWITCHED SOCKET OUTLETS 4 x 4 6 WAY EURO SOCKET OUTLET (250 V AC, 16 A, IP20)

PS672-P

CATALOGUE NO.

DESCRIPTION

PS674R-P PS675R-P PS680-P PS682R-P PS683R-P

Single switched socket outlet Double switched socket outlet SA/Euro combined socket outlet 6 Way Euro Socket Outlet Single switched sockect with 3 Euro sockets

PS683R-P

WHITE OPTION SILVER SHIMMER PRICE EA. PRICE EA. 49.00 85.00 49.00 85.00 106.00 POR

PACK SIZES 5 5 5 5 5

PS682R-P

PS674R-P

PS673-P

PS681-P

WHITE OPTION SILVER SHIMMER PRICE EA. PRICE EA. 59.00 106.00 80.00 127.00 80.00 127.00 80.00 127.00 118.00 ---

PS675R-P

PS680-P

2 x 4 UNSWITCHED SOCKET OUTLETS (250 V AC, 6 A, IP20) CATALOGUE NO.

DESCRIPTION

PACK SIZES

PS678-P

Socket outlet

WHITE OPTION SILVER SHIMMER PRICE EA. PRICE EA. NO COLOUR 34.00

ROUND UNSWITCHED SOCKET OUTLETS (250 V AC, 6 A, IP20) CATALOGUE NO.

DESCRIPTION

PACK SIZES

PS679-P

Socket outlet

PS678-P

PRICE EA. 25.00

PS679-P

Should you require a special combination please contact CBI. Refer to Page 5 for colour options.

WIRING ACCESSORIES

2 x 4 SWITCHED SOCKET OUTLETS (250 V AC, 16 A, IP20)

WIRING ACCESSORIES

4 x 4 DEDICATED SWITCHED SOCKET OUTLETS (250 V AC, 16 A, IP20) CATALOGUE NO.

DESCRIPTION

PS676R-P PS677R-P

Single dedicated switched socket outlet Double dedicated switched socket outlet

PACK SIZES 5 5

2 x 4 SURFACE MOUNT OUTLET BOX CATALOGUE NO.

DESCRIPTION

OB690

Surface mount outlet box (Plastic)

DESCRIPTION

OB878

Surface mount outlet box (Plastic)

PACK SIZES 10

DESCRIPTION

I129-P I131-P

Switch disconnector, 2-pole Switch disconnector, 3-pole

PACK SIZES 10

DESCRIPTION

I130-P

Switch disconnector, 2-pole

PRICE EA. 16.00

PRICE EA. 19.00

OB878

PACK SIZES 1 1

2 x 4 2 SWITCH DISCONNECTOR (250 V AC, 30 A, IP20) CATALOGUE NO.

PS677R-P

OB690

4 x 4 2/3 SWITCH DISCONNECTOR (250 V AC, 60 A, IP0X) CATALOGUE NO.

90.00 122.00

PS676R-P

4 x 4 SURFACE MOUNT OUTLET BOX ORDER No.

PRICE EA.

WHITE OPTION SILVER SHIMMER PRICE EA. PRICE EA. 97.00 144.00 192.00 239.00

I129 / I131-P

PACK SIZES 1

WHITE OPTION SILVER SHIMMER PRICE EA. PRICE EA. 85.00 120.00

Should you require a special combination please contact CBI. Refer to Page 5 for colour options.

I130-P

CATALOGUE NO.

DESCRIPTION

TV678-P B133-P T686-P

Single TV socket outlet complete with surround Bell push complete with surround Single telephone socket outlet (RJ11) complete with surround

5 5 5

NEON, TV, DSTV & TELEPHONE INSERTS CATALOGUE NO.

DESCRIPTION

TI657-P II662-P TVI663-P TVI664-P DI645-P

Telephone socket outlet insert, RJ11 Indication light insert, RED Standard TV connection insert DSTV connection insert Data socket outlet insert, RJ45

SWITCH INSERTS (IP20) CATALOGUE NO.

DESCRIPTION

BI661-P LI659-P LI660-P LI661-P LI662-P LI663-P II663-P LI664-P

Bell push insert (250 V AC, 4 A) Light switch insert (1-way), (250 V AC, 16 A) Light switch insert (2-way), (250 V AC, 16 A) Dimmer switch insert (250 V AC, 16 A) Blank switch insert 2-Pole switch insert (250 V AC, 16 A) 2-Pole switch insert (250 V AC, 20 A) Intermediate switch insert (250 V AC, 16 A)

TACTILE DIMMER MODULE

WHITE OPTION SILVER SHIMMER PRICE EA. PRICE EA. 91.00 126.00 40.00 75.00 78.00 113.00

PACK SIZES

TV678-P

PACK SIZES 10 10 10 5 10

TI657-P

II662-P

10 10 10 10 25 10 10 10

CATALOGUE NO.

DESCRIPTION

PACK SIZES

D500-P D500C-P

Dimmer module (250 V AC, 500 W resistive, 400 W inductive) Complete Dimmer Unit (G000-P, L1661-P, D500-P)

Refer to Page 5 for colour options.

4 4

TVI664-P

DI645-P

WHITE OPTION SILVER SHIMMER PRICE EA. PRICE EA. 24.00 33.00 13.00 22.00 18.00 27.00 21.00 31.00 4.00 13.00 37.00 47.00 51.00 61.00 73.00 82.00

LI660-P

LI659-P

T686-P

WHITE OPTION SILVER SHIMMER PRICE EA. PRICE EA. 63.00 73.00 31.00 NO COLOUR 73.00 82.00 72.00 81.00 77.00 NO COLOUR

TVI663-P

PACK SIZES

BI661-P

B133-P

LI663-P/II663-P

LI661-P

PRICE EA. 268.00 310.00

WIRING ACCESSORIES

2 x 4 TV & TELEPHONE SOCKET OUTLETS AND BELL PUSH

WIRING ACCESSORIES

LOAD TABLES

Minimum No. Of Lamps Maximum No. Of Lamps

500 W Universal Dimmer (D500C-P) 12 V Low Voltage 12 V Low Voltage Electronic Transformers Inductive Transformers 20 W 35 W 50 W — 20 W 35 W 50 W —

1 1 1 — 25 14 10 —

20 W 35 W 50 W — 20 W 35 W 50 W —

1 1 1 — 20 11 8 —

230 V Down Lighter

230 V Incandescent

— — 50 W — — — 50 W —

20 W 40 W 60 W 100 W 20 W 40 W 60 W 100 W

— — 1 — — — 10 —

SWITCH ADVANTAGE COLOUR OPTIONS

Silver Shimmer C03-T

Wiring Accessories available in the above colours. Please note: Due to the restraints of printing, colour reflected on this page may differ from actual product colour. * When ordering a colour option (EG); 1 lever one way in Silver Shimmer, construct ordering numbers as follows: L120C03-T • In the case of ordering wiring accessories, -P refers to our standard white range. • In the case of ordering wiring accessories, -T refers to our colour variant.

1 1 1 1 25 12 8 5

Live OUT

LI660-P

LI660-P L1

TWO WAY DIMMING & SWITCHING Dimmer Switch (LI661-P)

Live IN

Dimmer Switch (LI661-P)

Live OUT

Dimmer Module D500-P Neutral

INTERMEDIATE SWITCHING Live OUT

Live IN LI664-P Position 1 LI660-P

LI660-P

Position 2

DIMMING & SWITCHING ON/OFF Live IN

Dimmer Switch (LI661-P)

Live OUT Dimmer Module D500-P Neutral

WIRING ACCESSORIES

TWO WAY SWITCHING Live IN

SURGE PROTECTION DEVICES

CLIP-IN DUAL MOUNTED SURGE PROTECTION DEVICES

QKL-1(13)D

QKL-1(13)

5 kA (8/20 µs) SURGE PROTECTION DEVICES1: 275 V Mini Rail (57 mm Escutcheon) - Class II PRODUCT

DESCRIPTION

WIDTH

STD PACK

QFL-1(13) QFLN-2(13) QFL-3(13) QFLN-4(13)

1 Pole 275 V, with indicaton 1 Pole and Neutral 275 V, with indication 3 Pole 275 V, with indication 3 Pole and Neutral 275 V, with indication

13 mm 26 mm 39 mm 52 mm

12 6 4 3

PRICE EA.

ORDER NO.

192.00 364.00 545.00 727.00

QFLM0001 QFLM0002 QFLM0003 QFLM0004

20 kA (8/20 µs) SURGE PROTECTION DEVICES2: 275 V Mini Rail (57 mm Escutcheon) - Class II PRODUCT

DESCRIPTION

WIDTH

STD PACK

PRICE EA.

ORDER NO.

QKL-1(13) QKLN-2(13) QKL-3(13) QKLN-4(13)

1 Pole 275 V, with indication 1 Pole and Neutral 275 V, with indication 3 Pole 275 V, with indication 3 Pole and Neutral 275 V, with indication

13 mm 26 mm 39 mm 52 mm

12 6 4 3

478.00 915.00 1,374.00 1,830.00

QKLM0001 QKLM0002 QKLM0003 QKLM0004

5 kA (8/20 µs) SURGE PROTECTION DEVICES1: 275 V DIN Rail (45 mm Escutcheon) - Class II PRODUCT

DESCRIPTION

WIDTH

STD PACK

QFL-1(13)D QFLN-2(13)D QFL-3(13)D QFLN-4(13)D

1 Pole 275 V, with indication 1 Pole and Neutral 275 V, with indication 3 Pole 275 V, with indication 3 Pole and Neutral 275 V, with indication

13 mm 26 mm 39 mm 52 mm

12 6 4 3

PRICE EA.

ORDER NO.

192.00 364.00 545.00 727.00

QFLD0001 QFLD0002 QFLD0003 QFLD0004

20 kA (8/20 µs) SURGE PROTECTION DEVICES2: 275 V DIN Rail (45 mm Escutcheon) - Class II PRODUCT

DESCRIPTION

WIDTH

STD PACK

PRICE EA.

ORDER NO.

QKL-1(13)D QKLN-2(13)D QKL-3(13)D QKLN-4(13)D

1 Pole 275 V, with indication 1 Pole and Neutral 275 V, with indication 3 Pole 275 V, with indication 3 Pole and Neutral 275 V, with indication

13 mm 26 mm 39 mm 52 mm

12 6 4 3

478.00 915.00 1,374.00 1,830.00

QKLD0001 QKLD0002 QKLD0003 QKLD0004

5 kA (8/20 µs) SURGE PROTECTION DEVICES1: 130 V Dual Mounted - Class II PRODUCT QFL-1(13) QFL-1(13)D

DESCRIPTION

WIDTH

STD PACK

PRICE EA.

ORDER NO.

1 Pole 130 V, 5 kA with indication Mini rail (57 mm Escutcheon) 1 Pole 130 V, 5 kA with indication DIN rail (45 mm Escutcheon)

13 mm

192.00

QFLM1001

13 mm

200.00

QFLD1001

1Required to be backed up by a QA MCB. 2Required to be backed up by a QF MCB.

CLASS ll SPD’S ARE ONLY TO BE USED WHERE ITEMS ARE NOT SUBJECTED TO DIRECT LIGHTNING STRIKES AND THE VOLTAGE / CURRENT SURGES ARE ATTENUATED (REDUCED IN MAGNITUDE) PRODUCT TYPE

QFL

Maximum Continuous Operating Voltage Voltage Protection Level (Peak) Nominal Discharge Current (In) Maximum Discharge Current (Max) Short Circuit Withstand

275V AC (RMS) 1,5kV 5kA (8/20μs) 10kA (8/20μs) 2,5kA (50Hz)

QKL 275V AC (RMS) 1,5kV 20kA (8/20μs) 40kA (8/20μs) 5kA (50Hz)

C FRAME

DD FRAME

L SERIES

CIRCUIT BREAKERS TYPE B-FRAME B-FRAME C-FRAME C-FRAME DD-FRAME DD-FRAME J SERIES L SERIES

POLES 1-2 1-2 1-4 1-2 1-4 1-2 1 1

VOLTAGE 240 V AC 65 V DC 240 V AC 80 V DC 240 / 415 V AC 80 V DC 80 V DC 125 V DC

RATING (A) 1 - 30 1 - 30 1 - 50 1 - 50 1 - 70 (100 A - 1 Pole) 1 - 250 100 - 750 700 - 1500

PRICE EA. POR POR POR POR POR POR POR POR

Notes: The CBE range of products are fully approved by leading international authorities such as VDE, UL, IEC and CSA. *Contact CBI for availability. * Standard discounts are not applicable.

Should you experience any “stock-outs” in your area, contact us directly on our new HOTLINE number 0860 BREAKR (273 257) 8

CIRCUIT BREAKERS FOR EQUIPMENT

B FRAME

CBE RANGE*

RAIL MOUNTED DC CIRCUIT BREAKERS

QDC RANGE (80 V DC, 125 V DC)

QDC-1(13)-D

80 V DC CIRCUIT BREAKERS 10 kA Curve U2 Mini-rail Mounting, 57 mm Escutcheon and DIN Rail Mounting, 45 mm Escutcheon MCB WIDTH (mm) 13 (1 Module)

STD PACK 12

26 (2 Modules)

80 V DC

26 (2 Modules) 39 (3 Modules)

TYPE

POLES

VOLTAGE

QDC-1(13) (Grey Handle)

80 V DC

QDC-2(13) (Grey Handle)

80 V DC

QDC-2(13) (Grey Handle) QDC-3(13) (Grey Handle)

2 (Parallel) 3 (Parallel)

RATING (A)

PRICE EA.

5 10,15,20 25,30,35,40 45,50,60 5 10, 15, 20 25,30,35,40 45,50 80 100 125,150

TBA TBA TBA TBA TBA TBA TBA TBA TBA TBA TBA

125 V DC CIRCUIT BREAKERS 10 kA Curve U2 Mini-rail Mounting, 57 mm Escutcheon and DIN Rail Mounting, 45 mm Escutcheon MCB WIDTH (mm) 13 (1 Module)

STD PACK 12

26 (2 Modules)

TYPE

POLES

VOLTAGE

QDC-1(13) (Grey Handle)

125 V DC

QDC-2(13) (Grey Handle)

125 V DC

QDC-2(13) (Grey Handle)

2 (Parallel)

125 V DC

RATING (A)

PRICE EA.

5 10,15,20 25,30,35,40 45,50,60 5 10,15,20 25,30,35,40 45,50 80 100

TBA TBA TBA TBA TBA TBA TBA TBA TBA TBA

125 V DC CIRCUIT BREAKERS 10 kA Curve U2, DIN Rail Mounting, 45 mm Escutcheon TYPE

POLES

VOLTAGE

QDC-1(26)-D (Grey Handle)

125 V DC

MCB WIDTH (mm) 26 (1 Module)

Contact CBI for details. Standard discounts are not applicable.

STD PACK 6

RATING (A)

PRICE EA.

80,100,125

TBA

QA-1(13)

QA-2(13)

QA-3(13)

QA-N-2(13)

QA-N-4(13)

QA-S-3(13)

CIRCUIT BREAKERS 3 kA Curve 3 (Standard) Mini Rail Mounting, 57 mm Escutcheon TYPE

MCB WIDTH (mm) 13 (1 Module)

STD PACK 12

26 (2 Modules)

415 V AC

39 (3 Modules)

1+N

240 V AC

26 (2 Modules)

3+N

415 V AC

52 (4 Modules)

POLES

VOLTAGE

QA-1(13) (White Handle)

240 V AC

QA-2(13) (White Handle)

415 V AC

QA-3(13) (White Handle)

QA-N-2(13) (White / Green Handle) QA-N-4(13) (White / Green Handle)

RATING (A) 5 10,15,20 25,30,35,40 45,50,60 5 10,15,20 25,30,35,40 45,50 5 10,15,20 25,30,35 40,45,50 5,10,15,20 25,30,35,40,45,50 60 5,10,15,20,25 30,35,40,45,50

PRICE EA.

ORDER NO.

108.00 110.00 123.00 127.00 413.00 424.00 436.00 469.00 610.00 663.00 673.00 686.00 292.00 309.00 315.00 793.00 811.00

QAL183...

QAL283...

QAL383...

QAL213...

QAL413...

DUAL MOUNT SWITCH DISCONNECTORS 3 kA, Mini Rail Mounting, 57 mm Escutcheon

QA-S-1(13) (Green Handle)

WITHSTAND kA1 240 V AC 3

QA-S-2(13) (Green Handle)

415 V AC

26 (2 Modules)

215.00

QAL20063

QA-S-3(13) (Green Handle)

415 V AC

39 (3 Modules)

330.00

QAL30063

QA-S-4(13) (Green Handle)

415 V AC

52 (4 Modules)

415.00

QAL40063

TYPE

POLES

VOLTAGE

MCB WIDTH (mm) 13 (1 Module)

STD PACK 12

RATING (A)

PRICE EA.

ORDER NO.

107.00

QAL10063

Notes: The above Voltages and kA ratings are in accordance with SANS specifications, (see side of product). The front printing on the product refers to Voltages and kA ratings in accordance with IEC specifications. Max Cable Size 35 mm2 - QA (13). 1Required to be backed up by suitable Short Circuit Protection Device (SCPD).

RESIDENTIAL CIRCUIT BREAKERS + SWITCH DISCONNECTORS - 3 kA

QA RANGE MINI RAIL 13MM HYDRAULIC MAGNETIC

COMMERCIAL / INDUSTRIAL CIRCUIT BREAKERS + SWITCH DISCONNECTORS - 6 kA

QF-1(13)

QF-2(13)

QF RANGE DUAL MOUNT 13MM HYDRAULIC MAGNETIC

QF-3(13)

QF-N-2(13)

QF-N-4(13)

QF-S-4(13)

CIRCUIT BREAKERS 6 kA Curve 2 (Standard) Mini and DIN Rail Mounting, 57 mm Escutcheon MCB WIDTH (mm) 13 (1 Module)

STD PACK 12

26 (2 Modules)

415 V AC

39 (3 Modules)

240 V AC

415 V AC

26 (2 Modules) 52 (4 Modules)

TYPE

POLES

VOLTAGE

QF-1(13) (White Handle)

240 V AC

QF-2(13) (White Handle)

415 V AC

QF-3(13) (White Handle)

QF-N-2(13) 1+N (White / Green Handle) QF-N-4(13) 3+N (White / Green Handle)

RATING (A)

PRICE EA.

ORDER NO.

5 10,15,20 25 5 10,15,20 25 5 10,15,20 25 5,10,15,20 25 5,10,15, 20 25

119.00 121.00 135.00 449.00 462.00 503.00 720.00 720.00 732.00 317.00 337.00 863.00 863.00

QFA182...

QFA282...

QFA382...

QFA212... QFA412...

CIRCUIT BREAKERS 6 kA Curve 1 (Special) Mini and DIN Rail Mounting, 57 mm Escutcheon TYPE

POLES

VOLTAGE

QF-1(13) (Orange Handle) QF -2(13) (Orange Handle) QF-3(13) (Orange Handle) QF-N-2(13) (Orange Handle)

240 V AC

415 V AC

1+N

240 V AC

MCB WIDTH (mm) 13 (1 Module) 26 (2 Modules) 39 (3 Modules) 26 (2 Module)

STD PACK 12

PRICE EA.

ORDER NO.

5,10,15,20,25

167.00

QFA181...

5,10,15,20,25

615.00

QFA281...

5,10,15,20 25 5,10,15,20 25

923.00 929.00 353.00 357.00

QFA381...

RATING (A)

QFA211...

SWITCH DISCONNECTORS 6 kA, Mini and DIN Rail Mounting, 57 mm Escutcheon TYPE

POLES

QF-S-1(13) (Green Handle) QF-S-2(13) (Green Handle) QF-S-3(13) (Green Handle) QF-S-4(13) (Green Handle)

1 2 3 4

WITHSTAND MCB WIDTH (mm) kA1 240 V AC 6 13 (1 Module) 415 V AC 6 26 (2 Modules) 415 V AC 6 39 (3 Modules) 415 V AC 6 52 (4 Modules) VOLTAGE

STD PACK 12

RATING (A)

PRICE EA.

ORDER NO.

124.00

QFA10063

233.00

QFA20063

364.00

QFA30063

467.00

QFA40063

Notes: The above Voltages and kA ratings are in accordance with SANS specifications, (see side of product). The front printing on the product refers to Voltages and kA ratings in accordance with IEC specifications. Max Cable Size 35 mm2 - QF (13). 1Required to be backed up by suitable Short Circuit Protection Device (SCPD).

Contact CBI for details.

QF-1(26)-C1

QF-1(26)-C2

QF-2(26)-C2

QF-3(26)-C2

QF-S-2(26)

CIRCUIT BREAKERS 6 kA Curve 1(Special) Mini and DIN Rail Mounting, 57 mm Escutcheon MCB WIDTH (mm) 26 (1 Module)

STD PACK 12

52 (2 Modules)

78 (3 Modules)

TYPE

POLES

VOLTAGE

QF-1(26) (Orange Handle)

240 V AC

QF-2(26) (Orange Handle)

415 V AC

QF-3(26) (Orange Handle)

415 V AC

RATING (A)

PRICE EA.

ORDER NO.

5,10,15,20 25,30,35,40,45,50,63 80 100,125 5,10,15,20 25,30,35,40,45,50,63 80 100 5 10,15,20 25,30,35,40,45,50,63 80 100

169.00 174.00 280.00 401.00 620.00 623.00 906.00 986.00 928.00 930.00 932.00 1,361.00 1,472.00

QFE181...

QFE281...

QFE381...

CIRCUIT BREAKERS 6 kA Curve 2(Standard) Mini and DIN Rail Mounting, 57 mm Escutcheon MCB WIDTH (mm) 26 (1 Module)

STD PACK 12

52 (2 Modules)

415 V AC

78 (3 Modules)

QF-N-2(26) 1+N (White / Green Handle)

240 V AC

52 (2 Modules)

QF-N-4(26) 3+N (White / Green Handle)

240V AC

104 (4 Modules)

TYPE

POLES

VOLTAGE

QF-1(26) (White Handle)

240 V AC

QF-2(26) (White Handle)

415 V AC

QF-3(26) (White Handle)

RATING (A)

PRICE EA.

ORDER NO.

5,10 15,20,25,30 35,40,45,50,63 80 100,125 5 10,15,20 25,30,35,40 45,50,63 80 100 5,10,15,20 25,30,35,40,45,50,63 80 100 5,10,15,20 25,30,35,40 45,50,63 80 100 70,80,90,100

115.00 123.00 130.00 245.00 284.00 454.00 462.00 509.00 516.00 853.00 1,274.00 663.00 669.00 1,227.00 1,472.00 306.00 319.00 356.00 533.00 539.00 1,731.00

QFE182...

QFE282...

QFE382...

QFE212...

QFE412...

DUAL MOUNT SWITCH DISCONNECTORS 6 kA, Mini and DIN Rail Mounting, 57 mm Escutcheon TYPE

POLES

QF-S-1(26)

QF-S-2(26)

QF-S-3(26)

QF-S-4(26)

WITHSTAND MCB WIDTH kA (mm) 240 V AC 6 26 (1 Module) 415 V AC 6 52 (2 Modules) 415 V AC 6 78 (3 Modules) 415 V AC 6 104 (4 Modules) VOLTAGE

STD PACK 12 6 4 3

RATING (A) 63 100 63 100 63 100 63 100

PRICE EA.

ORDER NO.

138.00 233.00 272.00 447.00 423.00 739.00 556.00 985.00

QFE10063 QFE100100 QFE20063 QFE200100 QFE30063 QFE300100 QFE40063 QFE400100

COMMERCIAL / INDUSTRIAL CIRCUIT BREAKERS + SWITCH DISCONNECTORS - 6 kA

QF RANGE DUAL MOUNT 26MM HYDRAULIC MAGNETIC

COMMERCIAL CIRCUIT BREAKERS + SWITCH DISCONNECTORS - 6 kA

QF RANGE DIN RAIL 18MM HYDRAULIC MAGNETIC

QF-3(18)-D-C1

QF-1(18)-D-C2

QF-2(18)-D-C2

QF-3(18)-D-C2

CIRCUIT BREAKERS 6 kA Curve 1 (Special) DIN Rail Mounting, 45 mm Escutcheon TYPE

POLES

VOLTAGE

QF-1(18)-D (Orange Handle) QF-2(18)D (Orange Handle) QF-3(18)-D (Orange Handle)

240 V AC

415 V AC

MCB WIDTH (mm) 18 (1 Module) 36 (2 Modules) 54 (3 Modules)

STD PACK 12 6 4

RATING (A) 6,10,16,20 25,32,40,50,63 6,10,16,20 25,32,40,50,63 6,10,16,20 25,32,40,50,63

PRICE EA.

ORDER NO.

168.00 173.00 620.00 622.00 929.00 932.00

QFD181... QFD281... QFD381...

CIRCUIT BREAKERS 6 kA Curve 2 (Standard) DIN Rail Mounting, 45 mm Escutcheon MCB WIDTH (mm) 18 (1 Module)

STD PACK 12

36 (2 Modules)

415 V AC

54 (3 Modules)

QF-N-2(18)-D2 1+N (White / Green Handle)

240 V AC

36 (2 Modules)

QF-N-4(18)-D3 3+N (White / Green Handle)

415 V AC

72 (4 Modules)

TYPE

POLES

VOLTAGE

QF-1(18)-D (White Handle)

240 V AC

QF-2(18)-D (White Handle)

415 V AC

QF-3(18)-D (White Handle)

RATING (A) 6, 10, 16, 20 25, 32 35,40,50,63 6 10,16,20 25,32,40 45,50,63 6 10,16,20 25,32,40,45,50,63 6,10,16,20 25,32,40 45,50,63 6,10,16,20 25,32,40 50,63

Notes: The above Voltage and kA ratings are in accordance with IEC specifications. (See front printing of product). The SANS specifications for voltage and kA ratings are printed on the side of the product. Max Cable Size 35 mm2 - QF (18). 1Required to be backed up by suitable Short Circuit Protection Device (SCPD).

Contact CBI for details.

PRICE EA.

ORDER NO.

116.00 131.00 134.00 454.00 462.00 510.00 516.00 768.00 663.00 669.00 309.00 321.00 359.00 863.00 914.00 926.00

QFD182...

QFD282...

QFD382...

QFD212...

QFD412...

QF-3(18)-D-C2 QF-N-2(18)-D-C2

QF-N-4(18)-D-C2

QF-S-2(18)-D

QF RANGE DIN RAIL 18MM THERMAL MAGNETIC CIRCUIT BREAKERS 6 kA Curve 1 (Special) DIN Rail Mounting, 45 mm Escutcheon TYPE

POLES

VOLTAGE

QF-1(18)-D (Orange Handle)

240 V AC

415 V AC

QF-2(18)-D 2 (Orange Handle) QF-3(18)-D 3 (Orange Handle) QF-N-4(18)-D 3+N (Orange / Green Handle)

MCB WIDTH (mm) 18 (1 Module)

STD PACK 12

36 (2 Modules) 54 (3 Modules) 72 (4 Modules)

6 4 3

RATING (A)

PRICE EA.

ORDER NO.

6 10,16,20 25,32,40,50,63 6,10,16,20 25,32,40,50,63 6,10,16,20 25,32,40,50,63 6,10,16,20 25,32,40 50,63

169.00 169.00 175.00 621.00 625.00 932.00 933.00 1,107.00 1,178.00 1,195.00

QFD181...1

QFD281...1 QFD381...1 QFD411...1

CIRCUIT BREAKERS 6 kA Curve 2 (Standard) DIN Rail Mounting, 45 mm Escutcheon MCB WIDTH (mm) 18 (1 Module)

STD PACK 12

36 (2 Modules)

415 V AC

54 (3 Modules)

QF-N-2(18)-D 1+N (White / Green Handle)

240 V AC

36 (2 Modules)

QF-N-4(18)-D 3+N (White / Green Handle)

415 V AC

72 (4 Modules)

TYPE

POLES

VOLTAGE

QF-1(18)-D (White Handle)

240 V AC

QF-2(18)-D (White Handle)

415 V AC

QF-3(18)-D (White Handle)

RATING (A) 6,10,16,20 25,32 40,50,63 6 10,16,20 25,32,40 50,63 6 10,16,20 25,32,40,50,63 6,10,16,20 25,32,40 50,63 6,10,16,20 25,32,40 50,63

PRICE EA.

ORDER NO.

117.00 134.00 137.00 456.00 464.00 511.00 518.00 770.00 666.00 670.00 311.00 323.00 361.00 864.00 915.00 928.00

QFD182...1

QFD282...1

QFD382...1

QFD212...1

QFD412...1

SWITCH DISCONNECTORS 6 kA, DIN Rail Mounting, 45 mm Escutcheon TYPE

POLES

QF-S-1(18)-D

QF-S-2(18)-D

QF-S-3(18)-D

QF-S-4(18)-D

WITHSTAND MCB WIDTH (mm) kA1 240 V AC 6 18 (1 Module) 415 V AC 6 36 (2 Modules) 415 V AC 6 54 (3 Modules) 415 V AC 6 72 (4 Modules) VOLTAGE

STD PACK 12 6 4 3

RATING (A) 100 125 100 125 100 125 100 125

PRICE EA.

ORDER NO.

226.00 315.00 359.00 447.00 581.00 740.00 770.00 985.00

QFD100100 QFD100125 QFD200100 QFD200125 QFD300100 QFD300125 QFD400100 QFD400125

Notes: For non-standard amp ratings, please contact CBI. The above Voltages and kA ratings are in accordance with SANS specifications (see front printing of product). MCB Max Cable Size 35 mm2 Switch Disconnector Max Cable Size 50mm2 These Products are to be used in conjuction with the 63A QRM Range Earth leakages when earth leakage with add on overload Protection is required (Ref Page 16) Contact CBI for availabilty.

COMMERCIAL / INDUSTRIAL CIRCUIT BREAKERS + SWITCH DISCONNECTORS - 6 kA

QF-1(18)-D-C1 QF-2(18)-D-C2

COMMERCIAL / INDUSTRIAL CIRCUIT BREAKERS + SWITCH DISCONNECTORS - 6 kA

QF-1(27)-D

QF RANGE DIN RAIL 27MM THERMAL MAGNETIC

QF-2(27)-D

QF-3(27)-D

CIRCUIT BREAKERS 6 kA Curve 1 (Special) DIN Rail Mounting, 45 mm Escutcheon TYPE

POLES

VOLTAGE

QF-1(27)-D 1 (Orange Handle) QF-2(27)-D 2 (Orange Handle) QF-3(27)-D 3 (Orange Handle) QF-N-4(27)-D 3+N (Orange / Green Handle)

240 V AC

415 V AC

MCB WIDTH (mm) 27 (1 Module) 54 (2 Modules) 81 (3 Modules) 108 (4 Modules)

STD PACK 12 6 4 3

RATING (A)

PRICE EA.

ORDER NO.

80 100 80 100 80 100 80 100

280.00 401.00 906.00 986.00 1,361.00 1,472.00 1,788.00 1,788.00

QFF181...1 QFF281...1 QFF381...1 QFF411...1

CIRCUIT BREAKERS 6 kA Curve 2 (Standard) DIN Rail Mounting, 45 mm Escutcheon TYPE

POLES

VOLTAGE

QF-1(27)-D 1 (White Handle) QF-2(27)-D 2 (White Handle) QF-3(27)-D 3 (White Handle) QF-N-4(27)-D 3+N (White / Green Handle)

240 V AC

415 V AC

MCB WIDTH (mm) 27 (1 Module) 54 (2 Modules) 81 (3 Modules) 108 (4 Modules)

STD PACK 12 6 4 3

RATING (A)

PRICE EA.

ORDER NO.

80 100 80 100 80 100 80 100

245.00 280.00 853.00 1,274.00 1,227.00 1,472.00 1,627.00 1,627.00

QFF182...1 QFF282...1 QFF382...1 QFF412...1

Notes: For non-standard amp ratings, please contact CBI. The above Voltages and kA ratings are in accordance with SANS specifications (see front printing of product). Max Cable Size 50 mm2 These Products are to be used in conjunction with the 125A QRM Range Earth leakages when Earth leakage with Add on Overload Protection is required (Ref Page 16) Contact CBI for availabilty.

QF36C-D 100A

QRM16A-D 125A

QRM36A-D 125A

QRM16AD 63A

QRM36AD 63A

QF RANGE DIN RAIL THERMAL MAGNETIC EARTH LEAKAGES (30mA) EARTH LEAKAGE MODULE WITH SWITCH, Icw = 6 kA, DIN Rail Mounting, 45 mm Escutcheon - No Overload TYPE

POLES

VOLTAGE

QF16CD

1+N

240 V AC

QF36CD

3+N

415 V AC

MCB WIDTH (mm) 36 (1 Module) 72 (1 Module)

STD PACK 6 3

RATING (A)

PRICE EA.

ORDER NO.

63,100

959.00

QF16CD...

63,100

2,099.00

QF36CD...

EARTH LEAKAGE MODULE WITH SWITCH, Icw = 6 kA, DIN Rail Mounting, 45 mm Escutcheon TYPE

POLES

VOLTAGE

QRM16AD

415 V AC

QRM36AD

415 V AC

MCB WIDTH (mm) 36 (1 Module) 72 (1 Module)

STD PACK 6 3

RATING (A)

PRICE EA.

ORDER NO.

63 125 63 125

799.00 1,273.00 959.00 1,976.00

QRM16AD... QRM16AD... QRM36AD... QRM36AD...

NOTE:

For 6 kA Applications: QRM16A-D-63A must be used in con-junction with QF-N-2(18)-D on Page 14 QRM16A-D-125A must be used in con-junction with QF-2(27)-D on Page 15 QRM36A-D-63A must be used in con-junction with QF-N-4(18)-D on Page 14 QRM36A-D-125A must be used in con-junction with QF-N-4(27)-D on Page 15

Contact CBI for availabilty.

CABLE LENGTHS MAY NOT BE CUT

INTERCONNECTING CABLES AS PER ABOVE ILLUSTRATION ARE STANDARD WITH ALL QRM 125A PRODUCT PURCHASES.

STANDARD EARTH LEAKAGE MODULE 6 kA DIN RAIL MOUNTING

QF16C-D 100A

COMMERCIAL / INDUSTRIAL CIRCUIT BREAKERS + SWITCH DISCONNECTORS - 10 kA

QH-1(18)-D-C1

QH-2(18)-D-C2

QH-3(18)-D-C2

QH-N-2(18)-D-C2

QH-S-1(18)-D

QH-N-4(18)-D-C2

QH RANGE DIN RAIL 18MM THERMAL MAGNETIC STANDARD CIRCUIT BREAKERS 10 kA Curve 2 (Standard) DIN Rail Mounting, 45 mm Escutcheon TYPE

POLES

VOLTAGE

QH-1(18)-D 1 (White Handle) QH-2(18)-D 2 (White Handle) QH-3(18)-D 3 (White Handle) QH-N-2(18)-D 1+N (White / Green Handle) QH-N-4(18)-D 3+N (White / Green Handle)

240 V AC

415 V AC

240 V AC

415 V AC

MCB WIDTH (mm) 18 (1 Module) 36 (2 Modules) 54 (3 Modules) 36 (2 Modules) 72 (4 Modules)

STD PACK 12 6 4 6 3

RATING (A)

PRICE EA.

ORDER NO.

6,10,16,20 25,32,40,50,63 6,10,16,20 25,32,40,50,63 6,10,16,20 25,32,40,50,63 10,16,20 25,32,40,50,63 10,16,20 25,32,40,50,63

251.00 294.00 768.00 866.00 1,040.00 1,127.00 669.00 692.00 1,229.00 1,366.00

QHB182... QHB282... QHB382... QHB212... QHB412...

SPECIAL CIRCUIT BREAKERS 10 kA Curve 1, DIN Rail Mounting 45 mm Escutcheon TYPE

POLES

VOLTAGE

QH-1(18)-D 1 (Orange Handle) QH-2(18)-D 2 (Orange Handle) QH-3(18)-D 3 (Orange Handle) QH-N-4(18)-D 3+N (Orange / Green Handle)

240 V AC

415 V AC

MCB WIDTH (mm) 18 (1 Module) 36 (2 Modules) 54 (3 Modules) 72 (4 Modules)

STD PACK 12 6 4 3

RATING (A)

PRICE EA.

ORDER NO.

6,10,16,20 25,32,40,50,63 6,10,16,20 25,32,40,50,63 6,10,16,20 25,32,40,50,63 10,16,20 25,32,40,50,63

417.00 497.00 949.00 1,004.00 1,424.00 1,510.00 1,648.00 1,695.00

QHB181... QHB281... QHB381... QHB411...

SWITCH DISCONNECTORS 10 kA DIN Rail Mounting, 45 mm Escutcheon TYPE

POLES

VOLTAGE

QH-S-1(18)-D (Green Handle) QH-S-2(18)-D (Green Handle) QH-S-3(18)-D (Green Handle) QH-S-4(18)-D (Green Handle)

240 V AC

415 V AC

MCB WIDTH (mm) 18 (1 Module) 36 (2 Modules) 54 (3 Modules) 72 (4 Modules)

STD PACK 12

RATING (A)

PRICE EA.

ORDER NO.

100

267.00

QHB100100

100

531.00

QHB200100

100

755.00

QHB300100

100

1,065.00

QHB400100

Note: Use curve 1 for Motor Protection. Contact CBI for delivery. For Motor Starting Applications, refer to pages 69, 70, 71. Max Cable Size 35 mm2 - QH. These Products are to be used in conjunction with the 63A QRM Range Earth leakages when Earth leakage with Add on Overload Protection is required (Ref Page 19) Contact CBI for availabilty.

QH-1(27)-D-C2

QH-2(27)-D-C2

QH-3(27)-D-C2

QH-S-2(18)-D

STANDARD CIRCUIT BREAKERS 10 kA Curve 2 (Standard) DIN Rail Mounting, 45 mm Escutcheon TYPE

POLES

VOLTAGE

QH-1(27)-D 1 (White Handle) QH-2(27)-D 2 (White Handle) QH-3(27)-D 3 (White Handle) QH-N-2(27)-D 1+N (White / Green Handle) QH-N-4(27)-D 3+N (White / Green Handle)

240 V AC

415 V AC

240 V AC

415 V AC

MCB WIDTH (mm) 27 (1 Module) 54 (2 Modules) 81 (3 Modules) 54 (2 Modules) 108 (4 Modules)

STD PACK 12 6 4 6 3

RATING (A)

PRICE EA.

ORDER NO.

80 100 80 100 80 100 80 100 80 100

382.00 447.00 1,139.00 1,384.00 1,491.00 1,675.00 723.00 842.00 1,756.00 1,882.00

QHD182... QHD282... QHD382... QHD212... QHD412...

SPECIAL CIRCUIT BREAKERS 10 kA Curve 1, DIN Rail Mounting, 45 mm Escutcheon TYPE

POLES

VOLTAGE

QH-1(27)-D (Orange Handle) QH-2(27)-D (Orange Handle) QH-3(27)-D (Orange Handle) QH-N-4(27)-D (Orange Handle)

240 V AC

415 V AC

3+N

415 V AC

MCB WIDTH (mm) 27 (1 Module) 54 (2 Modules) 81 (3 Modules) 108 (4 Modules)

STD PACK 12 6 4 4

RATING (A)

PRICE EA.

ORDER NO.

80 100 80 100 80 100 80 100

651.00 707.00 1,379.00 1,395.00 2,068.00 2,092.00 1,756.00 1,882.00

QHD181... QHD281... QHD381... QHD411...

Note: Use curve 1 for Motor Protection. Contact CBI for delivery. For Motor Starting Applications, refer to pages 69, 70, 71. Max Cable Size 50 mm2 - QH. Note: These Products are to be used in conjunction with the 125A QRM Range Earth leakages when Earth leakage with Add on Overload Protection is required (Ref Page 19)

COMMERCIAL / INDUSTRIAL CIRCUIT BREAKERS + SWITCH DISCONNECTORS - 10 kA

QH-1(27)-D-C1 QH RANGE DIN RAIL 27MM THERMAL MAGNETIC

STANDARD EARTH LEAKAGE MODULE 10 kA DIN RAIL MOUNTING

QH16C-D 63A

QH36C-D 100A

QRM16A-D 125A

QRM36A-D 125A

QRM16AD 63A

QRM36AD 63A

QH RANGE DIN RAIL THERMAL MAGNETIC EARTH LEAKAGES (30mA) EARTH LEAKAGE MODULE WITH SWITCH, Icw = 6 kA, DIN Rail Mounting, 45 mm Escutcheon - No Overload TYPE

POLES

VOLTAGE

QH16CD

1+N

240 V AC

QH36CD

3+N

415 V AC

MCB WIDTH (mm) 36 72 (1 Module)

STD PACK 6 (1 Module) 3

RATING (A)

PRICE EA.

ORDER NO.

63,100

1,059.00

QHD16CD...

63,100

2,199.00

QHD36CD...

EARTH LEAKAGE MODULE WITH SWITCH, Icw = 6 kA, DIN Rail Mounting, 45 mm Escutcheon TYPE

POLES

VOLTAGE

QRM16AD

415 V AC

QRM36AD

415 V AC

MCB WIDTH (mm) 36 (1 Module) 72 (1 Module)

STD PACK 6 3

RATING (A)

PRICE EA.

ORDER NO.

63 125 63 125

799.00 1,273.00 959.00 1,976.00

QRM16AD... QRM16AD... QRM36AD... QRM36AD...

Note:

For 10 kA Applications: QRM16A-D-63A must be used in con-junction with QH-N-2(18)-D on page 17 QRM16A-D-125A must be used in con-junction with QH-N-2(27)-D on page 18 QRM36A-D-63A must be used in con-junction with QH-N-4(18)-D on page 17 QRM36A-D-125A must be used in con-junction with QH-N-4(27)-D on page 18 Contact CBI for availabilty.

CABLE LENGTHS MAY NOT BE CUT

INTERCONNECTING CABLES AS PER ABOVE ILLUSTRATION ARE STANDARD WITH ALL QRM 125A PRODUCT PURCHASES.

QF17A

QF17C

SF15A

SF15C

QA, QF, SF, AND SM RANGE EARTH LEAKAGES 1.

Special Earth Leakage Protection Devices All products manufactured by CBI to meet special non-standard requirements of customers will be quoted for (Price On Request).

Earth Leakage Protection Devices Abbreviation Codes Suffix A Earth Leakage protection device with overload, Single pole and Neutral / 3 pole and Neutral versions.

2. Standard Current Ratings Ampere ratings indicated are standard. Non-standard ratings can be provided (POR).

Suffix C Earth Leakage protection device (switch disconnector, non overload), Single pole and 3 pole versions.

3. Earth Leakage Protection Device Sensitivities Sensitivities indicated are standard. Non-standard sensitivities can be provided (POR). 4. Standard Pack Sizes CBI reserves the right to apply a surcharge not exceeding 20 % for orders received where quantities are below the minimum pack sizes. TYPE

POLES

VOLTAGE WITHSTAND kA

WIDTH (mm)

STD PACK

RATING (A)

PRICE EA.

ORDER NO.

Residential/Commercial Earth Leakage Protection Device Single Phase with Overload Protection (Dual Mount) QA17A

1+N

240 V AC

5,10,15,20,25,30,40,50,63

1,287.00

QA17A...

Residential/Commercial Earth Leakage Protection Device Single Phase without Overload Protection (Dual Mount)1 QA17C

1+N

240 V AC

669.00

QA17C...

Commercial/Industrial Earth Leakage Protection Device Single Phase with Overload Protection (Dual Mount) QF17A

1+N

240 V AC

5,10,15,20,25,30,40,50,63

1,389.00

QF17A...

Commercial/Industrial Earth Leakage Protection Device Single Phase without Overload Protection (Dual Mount)1 QF17C

1+N

240 V AC

959.00

QF17C...

Residential/Commercial Earth Leakage Protection Device Three Phase with Overload Protection (Dual Mount) QA36AW

3+N

415 V AC

6,10,15,20,25,30,40,50,63

2,199.00

QA36AW2...

Residential/Commercial Earth Leakage Protection Device Three Phase without Overload Protection (Dual Mount)1 QA36CW

3+N

415 V AC

1,422.00

QA36CW...

DIN Commercial/Industrial Earth Leakage Protection Device Single Phase with Overload Protection (DIN Mount) QF14AD

1+N

240 V AC

6,10,16,20,32,40,50,63

1,389.00

QF14AD2...

DIN Commercial/Industrial Earth Leakage Protection Device Single Phase without Overload Protection (DIN Mount)1 QF14CD

1+N

240 V AC

959.00

QF14CD...

Commercial/Industrial Earth Leakage Protection Device Single Phase with Overload Protection (Mini Rail & Front Mount) SF15A

1+N

240 V AC

80,100

1,899.00

SF15K...

Commercial/Industrial Earth Leakage Protection Device Single Phase without Overload Protection (Mini Rail & Front Mount)1 SF15C

1+N

240 V AC

100

1,299.00

SF15A...

Commercial/Industrial Earth Leakage Protection Device Three Phase with Overload Protection (Mini Rail & Front Mount) SF36A

3+N

415 V AC

117

15,20,30,40,50,60,70,80

2,499.00

SF35K...

Commercial/Industrial Earth Leakage Protection Device Three Phase without Overload Protection (Mini Rail & Front Mount)1 SF36C

3+N

Max Cable Size 35 mm2 35 mm2 50 mm2 50 mm2 -

415 V AC

117

QA 5A-63A QF 5A-63A QF 70A-125A SF 15A-100A

1Required to be backed up by suitable Short Circuit Protection Device (SCPD).

2,099.00

SF35A...

RESIDENTIAL + COMMERCIAL / INDUSTRIAL CLIP IN EARTH LEAKAGE PROTECTION

QF14

COMMERCIAL / INDUSTRIAL CLIP-IN EARTH LEAKAGE PROTECTION

SM RANGE

SF / SM36A

SM15A

110V AC Mining / Industrial Earth Leakage Potection Device, Single Phase with Overload Protection (Mini Rail & Front Mount) TYPE

POLES

VOLTAGE

SM15A SM15A SM15A SM15A SM15A SM15A SM15A

1+N 1+N 1+N 1+N 1+N 1+N 1+N

110 V AC 110 V AC 110 V AC 110 V AC 110 V AC 110 V AC 110 V AC

6 6 6 6 6 6 6

30mA 50mA 100mA 250mA 375mA 500mA 1000mA

WIDTH (mm) 65 65 65 65 65 65 65

STD PACK 10 10 10 10 10 10 10

RATING (A)

PRICE EA.

ORDER NO.

10,15,20,30,40,50,60,80,100 10,15,20,30,40,50,60,80,100 10,15,20,30,40,50,60,80,100 10,15,20,30,40,50,60,80,100 10,15,20,30,40,50,60,80,100 10,15,20,30,40,50,60,80,100 10,15,20,30,40,50,60,80,100

1,899.00 1,899.00 1,899.00 1,899.00 1,899.00 1,899.00 1,899.00

SN15K... SN15L... SN15M... SN15N... SN15P... SN15Q... SN15R...

240V AC Mining / Industrial Earth Leakage Potection Device, Single Phase with Overload Protection (Mini Rail & Front Mount) TYPE

POLES

VOLTAGE

SM15A SM15A SM15A SM15A SM15A SM15A

1+N 1+N 1+N 1+N 1+N 1+N

240 V AC 240 V AC 240 V AC 240 V AC 240 V AC 240 V AC

6 6 6 6 6 6

50mA 100mA 250mA 375mA 500mA 1000mA

WIDTH (mm) 65 65 65 65 65 65

STD PACK 10 10 10 10 10 10

RATING (A)

PRICE EA.

ORDER NO.

10,15,20,30,40,50,60,80,100 10,15,20,30,40,50,60,80,100 10,15,20,30,40,50,60,80,100 10,15,20,30,40,50,60,80,100 10,15,20,30,40,50,60,80,100 10,15,20,30,40,50,60,80,100

1,899.00 1,899.00 1,899.00 1,899.00 1,899.00 1,899.00

SM15L... SM15M... SM15N... SM15P... SM15Q.. SM15R...

110V AC Mining / Industrial Earth Leakage Potection Device, Three Phase with Overload Protection (Mini Rail & Front Mount) TYPE

POLES

VOLTAGE

SM36A SM36A SM36A SM36A SM36A SM36A SM36A

3+N 3+N 3+N 3+N 3+N 3+N 3+N

110 V AC 110 V AC 110 V AC 110 V AC 110 V AC 110 V AC 110 V AC

6 6 6 6 6 6 6

30mA 50mA 100mA 250mA 375mA 500mA 1000mA

WIDTH (mm) 117 117 117 117 117 117 117

STD PACK 5 5 5 5 5 5 5

RATING (A)

PRICE EA.

ORDER NO.

10,15,20,30,40,50,60,80 10,15,20,30,40,50,60,80 10,15,20,30,40,50,60,80 10,15,20,30,40,50,60,80 10,15,20,30,40,50,60,80 10,15,20,30,40,50,60,80 10,15,20,30,40,50,60,80

2,499.00 2,499.00 2,499.00 2,499.00 2,499.00 2,499.00 2,499.00

SN35K... SN35L... SN35M... SN35N... SN35P.. SN35Q... SN35R...

415V AC Mining / Industrial Earth Leakage Potection Device, Three Phase with Overload Protection (Mini Rail & Front Mount) TYPE

POLES

VOLTAGE

SM36A SM36A SM36A SM36A SM36A SM36A

3+N 3+N 3+N 3+N 3+N 3+N

415 V AC 415 V AC 415 V AC 415 V AC 415 V AC 415 V AC

6 6 6 6 6 6

50mA 100mA 250mA 375mA 500mA 1000mA

WIDTH (mm) 117 117 117 117 117 117

STD PACK 5 5 5 5 5 5

* Please contact CBI to determine the earth leakage configuration and availability. Max Cable Size 50 mm2 - SM.

RATING (A)

PRICE EA.

ORDER NO.

15,20,30,40,50,60,80 15,20,30,40,50,60,80 15,20,30,40,50,60,80 15,20,30,40,50,60,80 15,20,30,40,50,60,80 15,20,30,40,50,60,80

2,499.00 2,499.00 2,499.00 2,499.00 2,499.00 2,499.00

SM35L... SM35M... SM35M... SM35P... SM35Q.. SM35R..

SAFETY BLANK

FUCHS RAIL TO RAIL FUCHS +HEINEMANN ADAPTOR PLATE

HANDLE LOCK

Mini Rail PRODUCT QA, QF, QA, QF QA, QF QA, QF QF High Rating QF High Rating QF High Rating QF High Rating QA, QF QA, QF QA, QF Adaptor Plate QA, QF QA SF, QF SF QF High Rating SF, E-Frame SAK Rail to Rail QAN QF QA, QF QA, QF, QH

DESCRIPTION STD PACK Shroud - 2 x 13 mm / 1 x 26 mm* 10 Shroud - 4 x 13 mm / 2 x 26 mm* 10 Shroud - 6 x 13 mm / 3 x 26 mm* 10 Shroud - 8 x 13 mm / 4 x 26 mm* 10 Shroud - 1 x 26 mm, Complete with MKII Surface Mounting Clip 10 Shroud - 2 x 26 mm (Open / Knockout) Complete with MKII Surface Mounting Clip 10 Shroud - 3 x 26 mm (Open / Knockout) Complete with MKII Surface Mounting Clip 10 Shroud - 4 x 26 mm (Open / Knockout) Complete wrth MKII Surface Mounting Clip 10 Shroud - Sealing Screws 100 Shroud - Insert Nuts 100 Mini Rail - 13 mm Module, 96 Modules 10 Heinemann Clip Tray to Samite 400 Insulating Clip-On / Terminal Cover 1 Safety Blank - 13 mm Module, Clips into Mini-Rail 100 Escutcheon blank - 26 mm Module, Clips into D/B Aperture 500 Dummy - 26 mm Single Pole 50 Surface Mounting Clips MKI - Price per 4-way strip (excl sealing screws and insert nuts) 40 Surface Mounting Clips MKII - Price per pair (excl. sealing screws and insert nuts) 40 Contactor Paralleling Bars 10 Fuchs Clip Tray to Mini Rail Adaptor Plate 50 Clip-in Neutral Bar (Mini rail only) 50 Escutcheon Blank (6,5 mm Module) 12 x 6,5 mm Way Strip 10 Shroud Mounting Kit (Black) 10 Handle Lock 1

PRICE EA. ORDER No. 50.00 3670093 84.00 3670095 104.00 3670097 115.00 3670099 52.00 3670002 87.00 3670004 108.00 3670008 115.00 3670006 4.00 3670012 2.00 2096000 4.00 SAMR096 15.00 SAMR100 POR 2156995 11.00 SAEB000 6.00 SFEB000 23.00 SF1002601 7.00 SAAX000 5.00 SFAX001 12.00 3670011 6.00 SAMR101 63.00 SANB000 21.00 2356208 25.00 3670145 30.00 QFAP001

DIN Rail PRODUCT QF DIN QF DIN QF DIN QF DIN QF DIN QF DIN QF DIN QF DIN

DESCRIPTION Shroud - 2 x 13 mm / 1 x 18 mm / 1 x 27 mm* Shroud - 4 x 13 mm / 2x 18 mm / 2 x 27 mm* Shroud - 6 x 13 mm / 4 x 18 mm / 3 x 27 mm* Shroud - 8 x 13 mm / 5 x 18 mm / 4 x 27 mm* Busbar - 18 mm Module, Single Phase 36 Modules Top Busbar - 18 mm Module, Single Phase 19 Modules Busbar - 18 mm Module, Three Phase Insulated Metre Lengths (16 x 3-Phase) Shroud - Mounting Kit (Grey)

PRODUCT QA, QF QA, QF QF QA, QF QA, QF QF QA, QF SF SA, SF, SH

DESCRIPTION Busbar - 13 mm Module, Single Phase 54 Modules Top Busbar - 13 mm Module, Single Phase 26 Modules Busbar 26 mm - Module, Single Phase 36 Modules Insulating Busbar Cover - Single Phase Busbar - 13 mm Module, Three Phase Insulated Metre Lengths (25 x 3-Phase) Busbar - 26 mm Module, Three Phase Insulated Metre Lengths (13 x 3-Phase) Busbar Link Extended Lug Terminal Handle Locking Mechanism (Heilock)

STD PACK 10 10 10 10 50 50 1 10

PRICE EA. ORDER No. 50.00 3670094 84.00 3670096 104.00 3670098 115.00 3670100 92.00 2121363 POR 2121381 875.00 3670121 18.00 3670146

STD PACK 50 50 50 1 1 1 50 50 10

PRICE EA. ORDER No. 84.00 SABBM54 84.00 2121380 102.00 SABBM36 18.00 2176081 875.00 3670010 870.00 3670009 11.00 SABL000 13.00 3190166 28.00 SAAP001

DIN and Mini Rail

*Complete with QA MK1 Surface Mounting Clip.

MCB ACCESSORIES

AUXILIARY PRODUCTS

SAK

AUXILIARY PRODUCTS

QAT-R-DM

ECU

Electronic Time Switches PRODUCT QAT-R-DM

DESCRIPTION Standard Electronic Time Switch with 24 Hour Reserve Dual Mount 39 mm

STD PACK 10

PRICE EA. 439.00

ORDER NO. QATRDM

STD PACK 10 5

PRICE EA. 439.00 439.00

ORDER NO. SACU0.. SACU0..

STD PACK 5

PRICE EA. 874.00

ORDER NO. SAKR001

DESCRIPTION STD PACK Plastic Pole Mounting Box Complete with One Operating Slide 10 (Excludes Mounting Bracket MCBs, will accept 1, 2, 3-Pole MCBs Type QF, SF and QH) Horizontal Mounting Bracket - Ferrous 10 Vertical Mounting Bracket - Ferrous 10 Vertical Mounting Bracket - Non-Ferrous 10 Horizontal / Vertical Mounting Bracket - Ferrous 10 Horizontal / Vertical Mounting Bracket - Non-Ferrous 10 Strapping Bracket - Non-Ferrous 10 Operating Slide with Hole Plug 10

PRICE EA. 277.00

ORDER NO. SPB1001

33.00 41.00 97.00 69.00 187.00 33.00 23.00

3674000 3674001 3670022 3674002 3670024 3670025 2166100

Energy Control Unit (Electronic) PRODUCT SA-ECU

DESCRIPTION 5,10,15 20 A Units, switches 21 A resistive load @ 230 V AC (5 kW) 25,30,40,60 A Units switches 21 A resistive load @ 230 V AC (5 kW)

Domestic Contactor (4 Pole Bridged Unit) PRODUCT SAK

DESCRIPTION Contactor 220 / 240 V AC - 4 Poles AC3 (Inductive Load) - Max 13A AC1 (Resistive Load) - Max 40A

Plastic Pole Mounting Box PRODUCT SPB1 SPB1 Kit-B SPB1 Kit-D SPB1 Kit-E SPB1 Kit-F SPB1 Kit-G SPB1 Kit-H SPB1 Slide

NRBCON002

NRBCON003

Ready Boards ORDER NO. Ready board NRBCON002

Ready board NRBCON003

DESCRIPTION 1 x QA 17C 63 A 2 x QA -1 (13) 20 A 3 x 16 A switched sockets 1 x 6 A Euro socket 1 x QA 17C 63 A 2 x QA-1 (13) 20 A 1 x switched bulkhead 3 x 16 A switched sockets 1 x 6 A Euro socket

NOTE: Other variations on request, including a CFL version Bulkhead

PRICE EA. 620.00

653.00

AUXILIARY PRODUCTS

READY BOARDS

AUXILIARY PRODUCTS

DISTRIBUTION BOARDS

ARCHITRAVE BOARD

20- WAY DB BOARD

Flush Mounted Distribution Boards DESCRIPTION 12-Way Steel Distribution Board, complete with 1 Plastic Cover and 1 Steel Tray (Mini Rail) 12-Way Steel Distribution Board, complete with 1 Steel Cover and 1 Steel Tray (Mini Rail) 20-Way White Plastic hinged dust cover 20-Way Steel Distribution Board, complete with 1 Plastic cover and 1 Steel tray (Mini Rail) 20-Way Front Cover (including hinged dust cover) 20-Way Steel Distribution Board, complete with 1 Steel cover and 1 Steel tray (Mini Rail)

STD PACK 1 1 1 1 1 1

PRICE EA. 181.00 181.00 21.00 249.00 52.00 282.00

ORDER NO. DBBOX12SP 3190796 2856033 DBBOX20SP 3670107 3190795

STD PACK 1

PRICE EA. 220.00

ORDER NO. NDBCON001

STD PACK 1 1

PRICE EA. 1,104.00 1,350.00

ORDER NO. DBBOX40 DBBOX60

Surface Mount Distribution Board DESCRIPTION 13-Way Surface Mount Plastic Distribution Board (Mini Rail)

Architrave Boards DESCRIPTION 40-Way (2 x 20-Way and Tray)1 60-Way (3 x 20-Way and Tray)1 1Complete with reversible door, lockable metal latch, metal hinges, earth and neutral bars,

mounting kit and manufactured in 1.2 & 1.0 mm mild steel & powder coated white.

Circuit Breaker Selection Guide QFL SPD (Surge Protective Device) QA-N-2(13) (1 pole + neutral combination)

- Protects appliances from overvoltage surges e.g. lightning

- Protects against overloads and short circuit faults up to 2,5 kilo Amps (kA)

QAT-R (Electronic Time Switch)

- Typical usage – Main switch disconnector – Isolate live and neutral

- Control lights, pool pumps, geysers etc - Compact size - Clips on mini and DIN rails inside DBs - Simple settings of time and programmes - Setting intervals: 30 minutes - Power Failure reserve of up to 24 hours (QAT-R) - LCD display - Programme can be bypassed - Terminals can accommodate 2 up to 10 mm cable

Ecolec EC320 (Electronic Kilo-Watt Hour Meter)

Measures energy consumption

QA17 – 2,5 kA EL (Earth Leakage Unit) - Protects life and property from electrical shock and fire hazards

2,5 kA MCB (Miniature Circuit Breaker) (Also available 5 A – 63 A )

ECU (Energy Control Unit) - Used for load shedding by controlling non-essential loads (e.g. geyser, underfloor heating) Example: stove = controlling appliance geyser = controlled appliance - Maximum controlled load (AC1=21A, MAX 4kW Geyser) Automatically controls household energy loads during peak periods

- Protects against overloads and short circuit faults up to 2,5 kiloAmps (kA) - Typical usage – Lights – Plugs

EC330CM

EC320CD

EC330CD

Ecolec Rail Mount Meters TYPE

PHASE

VOLTAGE

FREQUENCY

RATING

ESCUTCHEON

EC320CM EC320CD EC330CM EC330CD

1+N 1+N 3+N 3+N

230 230 230 230

50 50 50 50

5(80) Amps 5(80) Amps 5(80) Amps 5(80) Amps

57 mm 45 mm 57 mm 45 mm

NO. OF MODULES 2 2 4 4

STD PACK 6 6 3 3

PRICE EA.

ORDER NO.

609.00 609.00 1,720.00 1,720.00

EC320CM EC320CD EC330CM EC330CD

1 Standard discounts are not applicable. Contact CBI for discount structure

ORDERING INFORMATION Ordering Information PRODUCT DESCRIPTION Mini-rail 230 V / 50 Hz Din-rail 230 V / 50 Hz Qty per std pack Meter width Meter height Meter depth Mass / std pack

SINGLE PHASE DIRECT CONNECT EC320CM EC320CD 6 26 mm 107 mm 66 mm 1060 g

THREE PHASE FOUR WIRE EC330CM EC330CD 3 52 mm 107 mm 66 mm 1150 g

SHELL COLOUR Black Grey

ESCUTCHEON HEIGHT 57 mm 45 mm Shrink Wrap Carton Carton 178 mm wide Carton 68 mm high Carton 110 mm high

Rail Mount Meter The Rail Mount Meters are based on a meter module width of 13 mm with the single phase being 2-Modules and the three phase 4-Modules. The meter uses an integral current transformer as a measuring element and will count positive no matter from which direction the current is drawn. The display is a conventional cyclometer. The range includes Mini and DIN rail mountings, 230 V, 50 Hz.

Features • • • • • • •

IEC 61036 Class 1 electricity meters Single and three phase alternatives Fits all Mini and DIN rail Distribution Boards 7 digit indication of energy consumed to 1 / 10 kWH Dual colour lamp shows rate of consumption and/or confirms presence of incoming supply Supplied with anti-tamper terminal protection plugs Also available in 120 V / 60 Hz

LED Indications LED INDICATION Pulses RED Pulses GREEN Solid GREEN Pulses ORANGE Solid ORANGE Solid RED No LED

REASON DESCRIPTION Normal Consumption Pulses (1000 pulses per Kilo Watt Hour) Low Load Condition (Consumption is less than 30 Watts) No Load (Meter is powered up) Abnormal Load (Supply Voltage is between 265 - 460V or 60 - 90 V AC) Unsafe Load Condition (The Current being drawn is greater than 125A or the Supply Voltage is greater than 460V AC) Error Condition ( The Meters Internal Built In Test has failed) No LED Indication ( The Supply Voltage is less than 160V AC)

METERING PRODUCTS

EC320CM

RAIL MOUNT METERS (CLASS 1)

METERING PRODUCTS

1 RAIL MOUNT METERS

EC 300 series kWh consumption when using external CTs There is a requirement to measure loads in excess of the meters maximum current rating of 85 Amps. This can be done by using external CTs. The question of how to calculate the consumption when using external CTs, is one that repeatedly keeps being asked. The actual kWh consumption per phase can be calculated by multiplying the CT ratio being used by the difference between the current and previous meter reading Eg: For a 200/5 CT ratio the factor is 40. Therefore the consumption per phase = 40 x kWh consumption. For CT Selection, please refer to the NRS057 specification parts 1, 2 and 4. NOTE: Do not Earth CT’s fitted above!

PRODUCT APPROVALS • • •

SANS IEC 61036 test report MTR/BB0630-SR 5(80) A SANS 1799

Standard discounts are not applicable. Contact CBI for discount structure.

3 Phase 4 wire

(5 A)

3 Phase 4 wire

(40-100 A)

3 Phase 4 wire

(80-160 A)

Watt-Hour Meters3 DESCRIPTION 1 Phase 2 Wire 20 - 80 A with encapsulated coils 1 Phase 2 Wire 20 - 80 A with encapsulated coils (calibrated2) 3 Phase 4 Wire 40 - 100 A (calibrated2) 3 Phase 4 Wire 80 - 160 A (calibrated2) 3 Phase 4 Wire 5 A (calibrated2)

PRODUCT APPROVAL SABS 1607 / IEC 521 1Standard discounts are not applicable. Contact CBI for discount structure. 2Certificates available on request.

STD PACK

PRICE EA.

ORDER NO.

1 1 1 1 1

375.00 437.00 1,946.00 2,049.00 1,765.00

BF36-20/80 BF36-20/80-C MH36G-40-C MH36G-80-CER MH36-5A-C

METERING PRODUCTS

ROTATING DISC METERS 1 Phase 2 wire (20-80 A) (SABS Approved)

MOULDED CASE CIRCUIT BREAKERS + SWITCH DISCONNECTORS - 25 kA

50 mm

105 mm

210 mm

100 mm

JS / JSN RANGE (HYDRAULIC - MAGNETIC)

JS25

J25S

Distribution Circuit Breakers (Mixed Load) TYPE

240 V 25

kA@ 415 V -

525 V -

STD PACK 1

G4B

POLES

TERMINALS

JS25 Complete with Mounting Hardware

3 J25S Complete with 4 Phase Barriers, Mounting Hardware

RATING (A)

PRICE EA.

ORDER No.

80,100 125 150 200 250 15,20,25,30,35,40,50,60 70,80,90,100 125 150 160,175,200 225 250

1,478.00 1,536.00 1,668.00 1,723.00 1,911.00 2,942.00 2,979.00 3,126.00 3,314.00 3,948.00 3,985.00 4,682.00

JSS0100 JSS0125 JSS0150 JSS0200 JSS0250 JSO00_ _ _ JSO00_ _ _ JSO0125 JSO0150 JSO0_ _ _ JSO0225 JSO0250

100 150 200 250

1,920.00 2,501.00 3,253.00 3,805.00

JSN0100 JSN0150 JSN0200 JSN0250

UTLIZATION Cat A Cat A

MOUNTING Surface Mount Surface Mount

TERMINALS Lug Terminals Lug Terminals

PRICE EA.

ORDER No.

759.00 759.00 759.00 759.00 759.00 759.00 821.00 821.00 821.00 961.00 961.00 369.00 369.00 442.00 442.00 729.00 729.00 1,152.00 1,152.00 668.00 72.00 2,725.00 171.00 909.00 564.00 66.00 237.00

FSAA002 FSAA003 FSAA005 FSAA006 FSAA001 FSAA004 FSAA007 FSAA008 FSAA009 FSAC220 FSAC380 FSAG001 FSAH002 FSAE001 FSAF001 FSAQ001 FSAR001 FSAU001 FSAV001 FSAX006-013 FSAP001 4470076 FSAX001 FSAX003 FSAX002 FSAX004 FSAX005

Switch Disconnector1 J25SN Complete with 4 Phase Barriers, Mounting Hardware

25++

15++

G4B

25++

15++

For DC Application (AS BELOW) Contact CBI Poles V DC per Pole kA (lcu) 1 80 V DC 20 3 80 V DC 20

kA (lcs) 10 10

RATINGS (A) 80-250 300-750

JS Accessories DESCRIPTION LH = Left Hand Side, RH = Right Hand Side Shunt Trip

RH RH LH LH RH LH LH LH LH RH RH RH LH RH LH RH LH RH LH LH

Resettable Shunt Trip

Undervoltage Release Auxiliary Switch Trip Alarm Switch 2 x Auxiliary Switch 1 x Auxiliary +1 x Trip Alarm Switch Cylindrical Lock Handle Lock Plastic Daros Rotary Handle (Std.Shaft - 300 mm) (G4B) Stub Bar (G6) Rear Connecting Studs (250 A Max) (G5) Tandem Box Terminal (250 A Max) Phase Barriers (Set of 2) Terminal Covers (Each) (Line or Load)

}

3 Per Set line or load side

FACTORY FITTED Yes

Yes

Yes Yes Yes Yes Yes Yes

STD PACK 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Set Set Set Set 1

VOLTAGE-AC 110-250 380-600 110-250 380-600

110-250 380- 600 220-250 380-440

1Withstand current must be backed up by Suitable Short Circuit Protection Device (SCPD). ++To IEC60947-3. 2Accessories cannot be fitted to a single pole JS breaker.

Note: Contact CBI for Terminations

NOTE: Please fill in required AMP rating on dotted line of order number column.

VOLTAGE-DC

24 24 24

150 mm

300 mm

105 mm

LB / LBN RANGE (HYDRAULIC - MAGNETIC)

L20BN

L20B

Distribution Circuit Breakers (Mixed Load) TYPE L20B Complete with 4 Phase Barriers and Mounting Hardware

L40B Complete with 4 Phase Barriers and Mounting Hardware

POLES

kA@415 V lcu

TERMINALS

STD PACK

lcs

RATING (A)

PRICE EA.

ORDER No.

100,125,150 175,200,225 250 300 350,400 450,500 600 100,125,150 175,200,225 250 300 350,400 450,500 600

4,913.00 6,027.00 6,372.00 7,573.00 8,970.00 12,930.00 13,543.00 5,434.00 6,631.00 7,040.00 8,331.00 9,864.00 14,223.00 14,897.00

L20B_ _ _ L20B_ _ _ L20B250 L20B300 L20B_ _ _ L20B_ _ _ L20B600 L40B_ _ _ L40B_ _ _ L40B250 L40B300 L40B_ _ _ L40B_ _ _ L40B600

RATING (A)

PRICE EA.

ORDER No.

300 400 500 600

6,554.00 6,945.00 9,381.00 9,477.00

L20BN0300 L20BN0400 L20BN0500 L20BN0600

300 400 500 600

7,209.00 7,640.00 10,318.00 10,421.00

L40BN0300 L40BN0400 L40BN0500 L20BN0600

VOLTAGE-AC

PRICE EA.

ORDER No.

110 220 - 240 380 - 415

1,638.00 1,638.00 1,638.00 729.00 671.00 900.00 1,294.00 3,148.00 83.00

LBSHT110 LBSHT220 LBSHT380 LBAUX LBALARM 4120166 4670038 12CBI.3745 LBKIT

Switch Disconnector1 TYPE L20BN Complete with 4 Phase Barriers and Mounting Hardware L40BN Complete with 4 Phase Barriers and Mounting Hardware

POLES

Withstand kA@ 415 V

TERMINALS

STD PACK

20++

40++

LB Accessories DESCRIPTION Shunt Trip Shunt Trip Shunt Trip* Auxiliary Switch Trip Alarm Switch (G4B)Stub Busbar (500 - 600 A) (G6) Rear Connecting Studs (up to 250 A Max) Daros Rotary Handle (Std.shaft - 300 mm) Phase Barriers (Set of 4)

}

FACTORY FITTED Yes

STD PACK 1

Yes Yes

1 1 Set Set 1 Set

3 Per Set line or load side

1Withstand current must be backed up by Suitable Short Circuit Protection Device (SCPD). ++SABS 152. *Contact CBI for availability. All Accessories are Factory Fitted only.

NOTE: Please fill in required AMP rating on dotted line of order number column.

MOULDED CASE CIRCUIT BREAKERS + SWITCH DISCONNECTORS 20 kA - 40 kA

MOULDED CASE CIRCUIT BREAKERS + SWITCH DISCONNECTORS 25 kA - 50 kA

210 mm

280 mm

105 mm

MB / MBN RANGE (HYDRAULIC - MAGNETIC)

M35B

Distribution Circuit Breakers (Mixed Load) TYPE

POLES

TERMINALS

M25B M35B M50B

3 3 3

G4B G4B G4B

STD PACK 1 1 1

kA @415 V 25++ 35 50++

RATING (A)

PRICE EA.

ORDER No.

700,830 700,830 700,830

21,147.00 21,704.00 22,149.00

MB25_ _ _ MB35_ _ _ MB50_ _ _

18,365.00

MBN0830

PRICE EA. 2,429.00 2,429.00 2,429.00 1,734.00 1,783.00 108.00

ORDER No. MBAA220 MBAA_ _ _ MBAA525 MBAG000 MBAE000 2176069

Triple Pole Switch Disconnector1 M35BN

G4B

35++

830

MB Accessories STD PACK 1 1 1 1 1 Set

DESCRIPTION Shunt Trip with cut-out, both leads out

Auxiliary Switch Trip Alarm Switch Interphase Barriers (Set of 2)

VOLTAGE-AC 220 380 / 415 525

1Withstand current must be backed up by Suitable Short Circuit Protection Device (SCPD). ++To IEC60947-2 / 3.

Note: All MB type circuit breakers and switch disconnecters come complete with 4 phase barriers and mounting hardware. All Accessories are Factory Fitted only.

NOTE: Please fill in required AMP rating on dotted line of order number column.

Should you experience any “stock-outs” in your area, contact us directly on our new HOTLINE number 0860 BREAKR (273 257) 31

F65DV 16-250 A 105 mm 165 mm 86 mm

F1000D 15-250 A 105 mm 184 mm 103 mm

FD / FDN / GD / GDN RANGE - TRIPLE POLE (THERMAL - MAGNETIC)

G15D

F35D

Triple Pole Circuit Breakers (Mixed Load) TYPE

POLES

TERMINALS

G15D

F15D

G25D

F25D

G35D

F35D

F65DV2 Complete with Phase Barriers

G1 G1 G1 G1 G1 G4B4 G1 G1 G1 G1 G1 G4B4 G1 G1 G1 G1 G4B4 G1 G1 G1 G1 G4B4

NO. OF INTERPHASE kA@ 415 V 525 V BARRIERS 15 15 2 15 15 15 15 15 15 4 15 15 15 15 25 18 2 25 18 25 18 25 22 4 25 22 25 22 35 22 2 35 22 35 30 4 35 30 35 30 65 35 4 65 35 65 35 65 35 65 35

RATING (A)

PRICE EA.

ORDER No.

16,20,32,40,50,63 80,100 125 150,160 175,200,225 250 16,20,32,40,50,63 80,100 125 150,160 175,200,225 250 16,20,32,40,50,63 80,100 150,160 175,200,225 250 16-25,25-40,40-63 63-100 80-125 125-160 160-250

1,911.00 2,183.00 2,347.00 2,567.00 4,281.00 4,680.00 2,314.00 2,385.00 2,436.00 2,822.00 4,622.00 4,986.00 2,658.00 3,144.00 3,328.00 6,032.00 6,490.00 3,971.00 4,224.00 4,370.00 4,840.00 6,517.00

G15D_ _ _ G15D_ _ _ G15D_ _ _ F15D_ _ _ F15D_ _ _ F15D_ _ _ G25D_ _ _ G25D_ _ _ G25D_ _ _ F25D_ _ _ F25D_ _ _ F25D_ _ _ G35D_ _ _ G35D_ _ _ F35D_ _ _ F35D_ _ _ F35D_ _ _ F65DV_ _ _ F65DV63-100 F65DV80-125 F65DV125-160 F65DV160-250

Switch Disconnectors1 TYPE

POLES

TERMINALS

G35DN F35DN

3 3

G1 G1 G4B4

Withstand kA@ NO. OF INTERPHASE 415 V 525 V BARRIERS 30++ 18++ 30++ 22++ 30++ 22++

RATING (A)

PRICE EA.

ORDER No.

125 160 250

1,645.00 2,445.00 3,270.00

G35DN125 F35DN160 F35DN250

RATING (A)

PRICE EA.

ORDER No.

150 200

2,655.00 4,452.00

F10DDC150 F10DDC250

PRICE EA.

ORDER No.

4,927.00 4,927.00 5,377.00 6,519.00 10,395.00 12,728.00 14,007.00 15,440.00

F1000DV_ _ _ F1000DV_ _ _ F1000DV080 F1000DV100 F1000DV125 F1000DV160 F1000DV200 F1000DV250

Triple Pole Circuit Breakers for DC Traction TYPE

POLES

TERMINALS

F10DDC

G2 G2

kA@ 440 V DC 10 10

NO. OF INTERPHASE BARRIERS 4

Triple Pole Circuit Breakers for 1000 V Applications3 TYPE

F1000D2

POLES

TERMINALS G1 G1 G1 G1 G1 G1 G1 G1

kA@ 1000 V AC 10 10 10 10 10 10 10 10

NO. OF INTERPHASE RATING (A) BARRIERS 4 15-20,20-25,25-32,32-40 4 40-50,50-63 4 63-80 4 80-100 4 100-125 4 125-160 4 160-200 4 200-250

1Withstand current must be backed up by Suitable Short Circuit Protection Device (SCPD). 2Thermal Adjustable. 3F1000D uses special accessories. (See page 36 for list of accessories). 4 FD 250 A breakers come complete with G4B stub busbars (set of 6).

++To IEC60947-3.

NOTE: Please fill in required AMP rating on dotted line of order number column

MOULDED CASE CIRCUIT BREAKERS + SWITCH DISCONNECTORS 15 kA - 65 kA

G15D/G25D/F15D/F25D G35D/F35D 16-125 A 150-250 A 16-100 A 125-250 A a 90 mm 105 mm 90 mm 105 mm b 130 mm 165 mm 130 mm 165 mm c 68 mm 68 mm 68 mm 68 mm

ACCESSORIES

F35DN

GD / FD ACCESSORIES

F65DV

F1000DV

GD Accessories DESCRIPTION LH = Left Hand Side, RH = Right Hand Side

STD PACK

Shunt Trip

1 1 1 1 1 1 1 1 1 1 1 1 1 Set 1 1 1

Undervoltage Release

RH RH RH RH RH RH RH RH LH LH LH

Auxiliary Switch Double Auxiliary Switch Alarm Auxiliary Switch Line and Load shrouds Motor Operator 220 V 50 Hz (G4B) Stub busbar (Qty 3) Daros Rotary Handle (Std. shaft - 300 mm) Handle Lockout Interphase Barriers (Qty 1)

VOLTAGE (AC)

24-48 100-240 380-550 24 / 48 100-110 / 120-130 200-220 / 230-250 380-415 / 440-480 500-550 / 600

100-240 (AC / DC)

PRICE EA.

ORDER No. GD

351.00 351.00 351.00 738.00 738.00 738.00 738.00 738.00 244.00 490.00 501.00 205.00 9,830.00 171.00 1,236.00 258.00 84.00

SHTA048-1SWRS SHTA240-1SWRS SHTA550-1SWRS UVTNA048-1SWRS UVTNA130-1SWRS UVTNA250-1SWRS UVTNA480-1SWRS UVTNA600-1SWRS AX-1SWLS AX2-1SWL ALAX-1SWLS TCL-1SW3W MDS240-1SW FB-1SW 12MEC.1145 HLS-1SW BAF-1SW

PRICE EA.

ORDER No. FD

578.00 578.00 578.00 948.00 948.00 948.00 948.00 948.00 263.00 530.00 613.00 550.00 9,830.00 171.00 1,236.00 258.00 84.00

SHTA048-2SWRS SHTA240-2SWRS SHTA550-2SWRS UVTNA048-2SWRS UVTNA130-2SWRS UVTNA250-2SWRS UVTNA480-2SWRS UVTNA600-2SWRS AX-2SWLS AX2-2SWL ALAX-2SWLS TCL-2SW3W MDS240-2SW FSAX001 12MEC.1045 HLS-2SW BAF-2SW

FD Accessories DESCRIPTION LH = Left Hand Side, RH = Right Hand Side

STD PACK

Shunt Trip

1 1 1 1 1 1 1 1 1 1 1 1 1 Set 1 1 1

Undervoltage Release

RH RH RH RH RH RH RH RH LH LH LH

Auxiliary Switch Double Auxilary Switch Alarm Auxiliary Switch Line and Load shrouds Motor Operator 220 V 50 Hz (G4B) Stub busbar (Qty 3) Daros Rotary Handle (Std. shaft - 300 mm) Handle Lockout Interphase Barriers (Qty 1)

VOLTAGE (AC)

24-48 100-240 380-550 24 / 48 100-110 / 120-130 200-220 / 230-250 380-415 / 440-480 500-550 / 600

100-240 (AC / DC)

ACCESSORIES

F65DV ACCESSORIES F65SDV Accessories DESCRIPTION LH = Left Hand Side, RH = Right Hand Side Shunt Trip

Undervoltage Release

Auxiliary Switch Double Auxiliary Switch Line and Load shrouds Motor Operator 220 V 50 Hz Daros Rotary Handle (Std. shaft - 300 mm) Handle Lockout Interphase Barriers (Qty 1)

RH RH RH RH RH RH RH RH LH LH

STD PACK

VOLTAGE (AC)

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

24-48 100-240 380-550 24 / 48 100-110 / 120-130 200-220 / 230-250 380-415 / 440-480 500-550 / 600

100-240 (AC / DC)

ORDER No. F6SDV

PRICE EA. 578.00 578.00 578.00 948.00 948.00 948.00 948.00 948.00 263.00 530.00 550.00 9,830.00 1,236.00 258.00 84.00

SHTA048-2GSWR SHTA240-2GSWR SHTA550-2GSWR UVTSA048-2GSWRS UVTSA130-2GSWR UVTSA250-2GSWR UVTSA480-2GSWR UVTA600-2GSWR AX-2GSWLS AX2-2GSWLS TCL-2GSW3 MD250GSW240 12MEC.1245 HLS-2GSW BAF-2GSW

THERMAL and MAGNETIC Adjustable Chart - FDV TYPE F65DV 16-25 A F65DV 25-40 A F65DV 40-63 A F65DV 63-100 A F65DV 125-160 A F65DV 160-250 A 4 5

MAGNETIC 4,6,8,10 4,6,8,10

Magnetics are adjustable in fixed steps as per adjustability chart Thermals are adjustable in fixed steps as per adjustability chart

THERMAL 16,20,25 25,32,40 40,50,63 63,80,100 125,160 160,200,250

MOULDED CASE CIRCUIT BREAKERS + SWITCH DISCONNECTORS 15 kA - 70 kA

a b c

KD 140 mm 257 mm 103 mm

K1000D 140 mm 275 mm 120.5 mm K25D

K35D

K50D

KD, KDN RANGE (THERMAL - MAGNETIC), KDE RANGE (ELECTRONIC) KD Circuit Breakers (Mixed Load) TYPE

POLES

TERMINALS

K25D

G4B G4B G4B G4B G4B G4B

K35D

K50D

3 3 3

415 V 25 25 35 35 36 50

kA@ 500 V 22 22 30 30 22 40

525 V 30 30 35

NO. OF INTERPHASE BARRIERS 4 4 4 4 4 4

RATING (A)

PRICE EA.

ORDER No.

250 300,350,400 250 300,350,400 500,630 500,630

6,113.00 7,324.00 7,161.00 9,672.00 12,585.00 13,973.00

K25D250 K25D_ _ _ K35D250 K35D_ _ _ K35D_ _ _ K50D_ _ _

RATING (A)

PRICE EA.

ORDER No.

200-400 300-630 200-400 300-630

11,725.00 18,348.00 12,447.00 20,557.00

K35DE400X K50DE630X K65DE400X K70DE630X

RATING (A)

PRICE EA.

ORDER No.

300 400 630 630

6,667.00 6,980.00 8,901.00 12,062.00

K35DN300X K35DN400X K35DN630X K50DN630X

RATING (A)

PRICE EA.

ORDER No.

300 400

8,192.00 8,417.00

K15DDC300 K15DDC400

RATING (A)

PRICE EA.

ORDER No.

125-250 200-400 315-630

18,807.00 18,862.00 24,663.00

K1000DV250 K1000DV400 K1000DV630

KDE Electronic Circuit Breakers (Adjustable in Fixed Steps) TYPE

POLES

TERMINALS

K35DE K50DE K65DE K70DE

3 3 3 3

G4B G4B G4B G4B

415 V 35 50 65 70

kA@ 500 V 30 40 50 50

525 V 30 35 50 -

NO. OF INTERPHASE BARRIERS 4 4 4 4

Switch Disconnector1 TYPE

POLES

K35DN 3 K50DN

TERMINALS G4B G4B G4B G4B

WITHSTAND kA@ NO. OF INTERPHASE 400 V 500 V 525 V BARRIERS 35++ 22++ 4 35++ 22++ 4 36++ 22++ 4 50++ 40++ 35++ 4

Triple Pole Circuit Breakers for DC Traction TYPE

POLES

TERMINALS

K15DDC

G4B G4B

kA@ 440 V DC 15 15

NO. OF INTERPHASE BARRIERS 4 4

Triple Pole Circuit Breakers for 1000 V Applications2 TYPE

POLES

TERMINALS

G1 G1 G1

K1000D

kA@ 1000 V AC 15 15 15

NO. OF INTERPHASE BARRIERS 4 4 4

1Backed up by Suitable Short Circuit Protection Device (SCPD). 2K1000D uses special accessories. Contact CBI for price and availability. (See page 36).

++To IEC60947-2 / 3. Note: The new KD range is available from 250 A up to 630 A. Ampere ratings from 100 A to 225 A are available in the new FD range.

NOTE: Please fill in required AMP rating on dotted line of order number column.

K35DN

KD ACCESSORIES KD Accessories DESCRIPTION LH = Left Hand Side, RH = Right Hand Side Shunt Trip

RH RH LH RH Undervoltage Release LH/RH LH/RH LH/RH LH/RH Auxiliary Switch LH Trip Alarm Switch LH Alarm Auxiliary Switch LH (G6) Rear Connected Studs - 400 A (Line & Load - set of 6) (G6) Rear Connected Studs - 630 A (Line & Load - set of 6) Motor Operator Daros Rotary Handle (Std. shaft - 300 mm) Mechanical Interlock Interphase Barriers (Qty 1) Handle Lockout Cylindrical lock* (Same key) Cylindrical lock* (Different key) Line and Load Shroud ( Terminal Cover)

STD PACK 1 1 1 1 1 1 1 1 1 1 1 Set Set 1 1 1 1 1 1 1 1 2

VOLTAGE-AC

PRICE EA.

ORDER No.

24-48 AC / DC 100-450 100-450 380-550 110-120 220-240 380-415 500-550

1,197.00 712.00 712.00 712.00 1,281.00 1,281.00 1,281.00 1,281.00 463.00 498.00 605.00 1,151.00 1,863.00 6,227.00 6,227.00 1,323.00 4,913.00 92.00 314.00 581.00 581.00 625.00

SHT48-4SWRS SHT-4SWRS SHT-4SWLS SHT-A550-4SWRS UVTA120-4SWS UVTA240-4SWS UVTA415-4SWS UVTA550-4SWS AX-4SWLS AL-4SWLS ALAX-4SWLS ST-4SW3 ST-6SW3 MDS-4SWA110 MDS-4SWA220 12MEC.0645 MI630 BAF-4SW HLS-4SW 4470113 4470112 TCL-4SW3

PRICE EA. 7,324.00 463.00 6,227.00 4,913.00

PRICE 14,648.00 926.00 12,453.00 4,913.00

100-110 200-220

Example DESCRIPTION K25D 300 A Circuit Breaker KD Auxiliary Switch KD Spring Charge Motor Operator KD Mechanical Interlock and Baseplate

QTY 2 2 2 1

TOTAL

32,940.00

Note: â&#x20AC;˘ For mechanically interlocked automatic change over circuit breaker assembly (Factory assembled), take the price of 2 x selected KD MCCBs complete with auxiliary switches + 2 x KD spring charge motor operators and 1 x mechanical interlock. See above example. The breakers are electrically interlocked via their auxiliary switches. * Contact CBI for availability and type. These accessories do not fit the new K1000D breakers. Please contact CBI for price and availability.

MOULDED CASE CIRCUIT BREAKER ACCESSORIES - 1000 V F1000D & K1000D Accessories DESCRIPTION Shunt Trip (Fits both F1000D & K1000D)

Under Voltage Release (Fits both F1000D & K1000D)

Auxiliary Switch 1N/O (fits both F1000D & K1000D) Rear Connecting Studs - F1000D 250 A (Set of 3) Rear Connecting Studs - K1000D 630 A (Set of 3) Daros Handle - F1000D (Std. shaft - 300 mm) Daros Handle - K1000D (Std. shaft - 300 mm)

LH LH LH LH LH LH LH RH

FACTORY FITTED Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

STD PACK 1 1 1 1 1 1 1 1 Set Set 1 1

VOLTAGE

PRICE EA.

ORDER No.

24 V AC / DC 110-130 V AC / DC 208-250 V AC / DC 525 V AC / DC 110-130 V AC 208-240 V AC 525 V AC / DC

1,126.00 1,126.00 1,126.00 1,126.00 1,304.00 1,304.00 1,304.00 263.00 1,370.00 1,934.00 830.00 1,592.00

FD1000-SHTA24 FD1000-SHTA110 FD1000-SHTA220 FD1000-SHTA525 FD1000-UVTA110 FD1000-UVTA220 FD1000-UVTA525 FD1000-AX FD1000-RCS KD1000-RCS FD1000-DH KD1000-DH

KD ACCESSORIES

K25DN

MOULDED CASE CIRCUIT BREAKERS + SWITCH DISCONNECTORS 36 kA - 70 kA

LDE a

210 mm

275 mm

103 mm

LDE, LDN RANGE

L50DE

L50DN

Triple Pole Circuit Breakers (Mixed Load) Adjustable in Fixed Steps TYPE

POLES

TERMINALS

L35DE L50DE L70DE

3 3 3

G4B G4B G4B

415 V 36++ 50++ 70++

Standard Ratings 400-800 A kA@ NO. OF 500 V 525 V INTERPHASE BARRIERS 22++ 2 40++ 25++ 2 50++ 2

RATING (A)

PRICE EA.

ORDER No.

400-800 400-800 400-800

19,756.00 22,437.00 24,680.00

L35DE800X L50DE800X L70DE800X

RATING (A)

PRICE EA.

ORDER No.

800

14,598.00

L50DN800X

Triple Pole Switch Disconnector1 TYPE

POLES

TERMINALS

L50DN

G4B

Standard Ratings 800 A WITHSTAND kA@ NO. OF 400 V 500 V 525 V INTERPHASE BARRIERS 50++ 40++ 25++ 2

1Backed up by Suitable Short Circuit Protection Device (SCPD). ++To IEC60947-2 / 3.

LDE AND LDN ACCESSORIES DESCRIPTION LH = Left Hand Side, RH = Right Hand Side Shunt Trip

STD PACK 1 1 1

Undervoltage Release

1 1 1 1 1 1 1 Set 1 1 1 1 1 1

RH RH LH RH Auxiliary Switch (1N/0 + 1N/C) LH/RH Trip Alarm Switch LH/RH Alarm Auxiliary Switch (G6) Rear Connected Studs - 800 A (Line & Load - set of 6) LH/RH LH/RH Spring Charge Unit MDS Type 110 V AC LH Spring Charge Unit MDS Type 220 V AC LH Daros Rotary Handle (Std. shaft - 300 mm) LH Mechanical Interlock Key Interlock - Cylindrical type Phase barriers (Qty 1)

VOLTAGE-AC

PRICE EA.

ORDER No.

24-48 AC / DC 100-450 380-550

1,197.00 712.00 712.00

SHT48-4SWRS SHT-4SWRS SHTA550-4SWRS

110-120 220-240 380-415 500-550

1,281.00 1,281.00 1,281.00 1,281.00 463.00 498.00 605.00 2,345.00 6,227.00 6,227.00 1,719.00 4,913.00 581.00 103.00

UVTA120-4SWS UVTA240-4SWS UVTA415-4SWS UVTA550-4SWS AX-4SWLS AL-4SWLS ALAX-4SWLS ST-8SW3 MDS-8SWA110 MDS-8SWA220 12MEC.0845 MI630 4470113 BAF-8SW

100-110 200-220

N85DE

NDE AND NDN RANGE

N85DN

Triple Pole Circuit Breakers (Mixed Load) Adjustable Standard Ratings 500 - 1000 A, 600 - 1250 A, 800 - 1600 A TYPE

POLES

TERMINALS

N85DE

G4B

kA@ 415 V 500 V 85++ 65++

NO. OF INTERPHASE BARRIERS 2 2 2

RATING (A)

PRICE EA.

ORDER No.

500-1000 600-1250 800-1600

25,272.00 30,186.00 43,627.00

N85DE1000X N85DE1250X N85DE1600X

RATING (A)

PRICE EA.

ORDER No.

1000 1250

21,450.00 27,342.00

N85DN1000X N85DN1250X

VOLTAGE-AC

PRICE EA.

ORDER No.

100-120 200-240 380-450 500-550 100-120 200-240 380-450 500-550 100-110 200-220 -

1,801.00 1,801.00 1,801.00 1,801.00 1,888.00 1,888.00 1,888.00 1,888.00 643.00 1,064.00 643.00 4,913.00 32,295.00 32,295.00 581.00 2,209.00 103.00

SHTA120-10SWRS SHTA240-10SWRS SHTA450-10SWRS SHTA550-10SWRS UVTNA130-10SWRS UVTNA240-10SWRS UVTNA450-10SWRS UVTNA550-10SWRS AX-10SWLS ALAX-10SWLS AL-10SWLS MI1000 MD-10SWA110 MD-10SWA220 4470113 12MEC.0945 BAF-10SW

Triple Pole Switch Disconnector1 Standard Ratings: 1000,1250 A TYPE

POLES

TERMINALS

N85DN

G4B

WITHSTAND kA@ 415 V 500 V 85++ 65++

NO. OF INTERPHASE BARRIERS 2 2

NDE AND NDN ACCESSORIES NDE and NDN Accessories DESCRIPTION LH = Left Hand Side, RH = Right Hand Side Shunt Trip

Under Voltage Release

Auxiliary Switch (1N/0 + 1N/C) Alarm + Auxiliary Switch Combined Alarm Switch (1N/0 + 1N/C) Mechanical Interlock Spring Charge Unit MDS Type

FACTORY FITTED

STD PACK 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

RH RH RH RH RH RH RH RH LH LH LH

Key interlock - Cylindrical type Daros Handle Mechanism 12 MEC 0945 (Std shaft - 300 mm) Phase barriers (Qty 1)

Yes Yes Yes Yes

Note: For mechanically interlocked automatic change over circuit breaker assembly (Factory assembled), take the price of 2 x selected NDE MCCBs c/w Aux Switches +2 x NDE Spring Charge Operators and 1 x mechanical interlock. The breakers are electrically interlocked via their auxiliary switches. For additional auxiliary switches please specify. 1Backed up by Suitable Short Circuit Protection Device (SCPD). ++ To IEC60947-2 / 3

JSDC - SPECIAL TRACTION DC BREAKER

Triple Pole Circuit Breakers For DC TYPE

POLES

TERMINALS

kA@ 220 V DC

J10SDC

G4B

10++

NO. OF INTERPHASE BARRIERS 4

Note: ++To IEC60947-2/3. 3 For other ratings, please contact CBI for prices and availability.

RATING (A)

PRICE EA.

ORDER No.

250

4,534.00

FTO0250

MOULDED CASE CIRCUIT BREAKERS + SWITCH DISCONNECTORS - 85 kA

1000/1250A

210 mm 406 mm 140 mm

1600A

a b c

INTEGRAL EARTH LEAKAGE CIRCUIT BREAKERS 25 kA - 35 kA

a b c

EL3G 3P 16-100 A 90 mm 130 mm 68 mm

EL3F 3P 125-250 A 105 mm 165 mm 68 mm

EL4G 4P 16-100 A 120 mm 130 mm 68 mm

EL4F 4P 125-225 A 140 mm 165 mm 68 mm

a b c

ELK 3P 4P 140 mm 185 mm 257 mm 257 mm 103 mm 103 mm

ELFD / ELKD RANGE (THERMAL - MAGNETIC, ELECTRONIC)

ELK35D

Integral Earth Leakage Circuit Breakers (Mixed Load) not for 4-Wire Systems EL3G25D

POLES CB E/L 3 3

EL3F25D

EL3K35D

G4B

TYPE

TERMINALS G1

kA@ SENSITIVITY NO. OF INTERPHASE RATING (A) 380 V 400 V 525 V mA BARRIERS 1 25 25 15 30,175,250 2 16,20,32,40,50,63 2 80,100 25 25 15 30,250,3751 4 125,150,175 4 200,225,250 35 35 25 100,300,5002 4 250 4 300 4 400 4 630

PRICE EA.

ORDER No.

5,154.00 5,449.00 6,783.00 7,958.00 10,602.00 14,558.00 15,647.00 19,238.00

ELG25D3_ _ _

CB = Circuit Breaker Poles. E/L = Earth Leakage Poles. 1Sensitivity: Adjustable (instantanious tripping time). Other units available on request. (contact CBI for availability). 2Sensitivity: Adjustable mA and time delay setting (0.45, 1.0 2.0 s). 3Sensitivity: 30 mA fixed rating (instantanious tripping time).

NOTES: • For “EL3G/EL3F/EL3K” Accessories, refer to FD and KD accessories (only the left hand cavity is available for fitting of accessories). * Contact CBI for availability (Non Stock items).

NOTE: Please fill in required AMP rating on dotted line of order number column. TECHNICAL: 3 Phase EL’s without Neutral are not suitable for all 4 wire systems.

ELF25D3_ _ _ ELK35D3_ _ _

105 mm 125 mm 57 mm 50 mm

EB225H

EL305

ELP15

REMOTE CORE

EARTH LEAKAGE RELAYS EL305 / 306 Earth Leakage Relays EL3052 TYPE

SUFFIX

EL305 Complete with ClipTray

A AA B J K L Y Z

STANDARD VOLTAGE 110,220,380,525 110,220,380,525 110,220,380,525 1 525 1 525 1 525 110,220,380,525 220,380,525

SENSITIVITY mA 250 125 500 1000 5000 2000 30 50

STD PACK 1 1 1 1 1 1 1 1

REMOTE CORE IF REQUIRED (mm) 70,105 Not Available 70,105,152,190 70,105,152,190 70,105,152,190 70,105,152,190 Not Available Not Available

PRICE EA.

ORDER No.

1,930.00 2,304.00 1,930.00 2,340.00 2,340.00 2,340.00 2,636.00 2,636.00

QC5A00_ _ _ QC5AA0_ _ _ QC5B00_ _ _ QC5J00_ _ _ QC5K00_ _ _ QC5L00_ _ _ QC5Y00_ _ _ QC5Z00_ _ _

Inverse Definite Minimum Time (IDMT) Earth Leakage Relay EL3062 TYPE

SUFFIX

EL306 Complete with Clip-tray

C D E F

STANDARD VOLTAGE 110-525 110-525 110-525 110-525

SENSITIVITY mA 500 1000 2000 375

STD PACK 1 1 1 1

REMOTE CORE IF REQUIRED (mm) 70,105 70,105,152 70,105,152,190 70,105

PRICE EA.

ORDER No.

2,317.00 2,450.00 2,707.00 2,317.00

QC06C00_ _ _ QC06D00_ _ _ QC06E00_ _ _ QC06F00_ _ _

Remote Cores for EL305 / EL306 Earth Leakage Relays *1 TYPE RC3 RC4 RC6 RC8 Remote Test Button

INTERNAL DIAMETER 70 mm 105 mm 152 mm 190 mm

PRICE EA.

ORDER No.

• •

• • • •

• •

• • •

• • • •

2,636.00 2,707.00 3,071.00 4,425.00 239.00

TBA TBA TBA TBA TBA

PRICE EA. 7,922.00

ORDER No. EB99900

*1 Note: Remote Core and Earth Leakage Relay must be a matched pair (Factory Calibrated).

HOSPITAL MONITOR Hospital Earth Leakage Monitor TYPE EB225H (Early Bird)

POLES 1+N

VOLTAGE 230 V

kA -

mA 1

STD PACK 1

PORTABLE EARTH LEAKAGE UNITS Portable Earth Leakage Units AC 20 A 50 Hz, 2.5 kA @ 230 V, 30 mA SABS 767-2 TYPE ELP15

Fitted with 3-Standard 15 A round pin socket outlets & 20A Overload Protection

STD PACK 1

1 Other non-standard voltages available on request. 2 If the sum of the conductor’s outside diameter is greater than 50 mm, a remote core must be purchased with the EL305 / 6.

NOTE: Please fill in required VOLT rating on dotted line of order number column.

PRICE EA. 2,690.00

ORDER No. LP36K15

INDUSTRIAL AND MINING EARTH LEAKAGE RELAYS

a b c Ø

WORLD SUPER SERIES MCCBs (10 - 250 A)

NF125-SWA

WSS - CIRCUIT BREAKERS / SWITCH DISCONNECTERS

NF250-SWA

Circuit Breakers World Super Series SWA / SGW TYPE

POLES

TERMINALS

NF125-SWA2

NF125-SGW RT*

NF160-SWA2

NF160-SGW RT* NF250-SWA2

3 3

NF250-SGW RT*

G1 G1 G1 G1 G1 G1 G1 G1 G1 G1 G1 G1

Standard Ratings 16, 20, 25, 32, 40, 50, 63, 80, 100, 125, 150, 160, 175, 200, 225, 250 A kA@ NO. OF INTERPHASE RATING (A) 400 V 500 V 525 V BARRIERS 30 18 18 2 16,20,32,40,50,63 30 18 18 80,100,125 36 30 22 4 16-25,25-40,40-63 36 30 22 4 63-100 36 30 22 4 80-125 30 22 22 4 125 30 22 22 4 150,160 36 30 22 4 125-160 30 22 22 4 125,150,175,200,225 30 22 22 4 250 36 30 22 4 125-160 36 30 22 4 160-250

PRICE EA.

ORDER No.

2,392.00 2,764.00 2,388.00 2,765.00 3,255.00 3,534.00 4,049.00 4,049.00 4,855.00 5,376.00 4,855.00 5,376.00

NF125SW_ _ _ NF125SW_ _ _ NF125SW_ _ _ NF125SW63-100 NF125SW80-125 NF160SW125 NF160SW_ _ _ NF160SGW125-160 NF250SW_ _ _ NF250SW250 NF250SGW125-160 NF250SGW160-250

PRICE EA.

ORDER No.

1,566.00 3,849.00 3,849.00 4,602.00 5,172.00 5,172.00 5,896.00 6,649.00 5,896.00 6,649.00

NF63HW_ _ _ NF125HW_ _ _ NF125HGW_ _ _ NF160HW125 NF160HW_ _ _ NF160HGW125-160 NF250HW_ _ _ NF250HW250 NF250HGW125-160 NF250HGW160-250

PRICE EA.

ORDER No.

1,731.00 2,727.00 4,223.00 4,661.00

NF125CW_ _ _ NF250CW_ _ _ NF250CW_ _ _ NF250CW250

Circuit Breakers World Super Series HWA / HGW

TYPE

POLES TERMINALS

NF63-HWA NF125-HWA NF125-HGW RT* NF160-HWA

3 3 3 3

NF160-HGW RT* NF250-HWA

3 3

NF250-HGW RT*

G1 G2 G1 G1 G1 G1 G1 G1 G1 G1

Standard Ratings 10, 16, 20, 25, 32, 40, 50, 63, 80, 100, 125, 150, 160, 175, 200, 225, 250 A kA@ NO. OF INTERPHASE RATING (A) 400 V 500 V 525 V BARRIERS 10 7.5 2 10,16,20,,32,50,63 50 35 22 2 16,20,32,40,50,63,80,100 75 50 35 4 16-25,25-40,40-63,63-100,80-125 50 35 35 4 125 50 35 35 4 150,160 75 50 35 4 125-160 50 35 35 4 125,150,175,200,225 50 35 35 4 250 75 50 35 4 125-160 75 50 35 4 160-250

Circuit Breakers CWA Compact Economy Class TYPE

POLES

TERMINALS

NF125-CWA NF250-CWA

3 3

G1 G1 G1 G1

Standard Ratings 63, 80, 100, 125, 150, 175, 200, 225, 250 A kA@ NO. OF INTERPHASE RATING (A) 400 V 500 V 525 V BARRIERS 10 10 2 63,80,100 18 14 4 125,150 18 14 4 175,200,225 18 14 4 250

Circuit Breakers DC Locomotive Protection (Orange Handle) TYPE

POLES TERMINALS

NF250-CWA (DC)

3 3

G1 G1

kA@ 440 V DC 10 10

NO. OF INTERPHASE RATING (A) BARRIERS 4 150 4 175,200,225,250

PRICE EA.

ORDER No.

2,979.00 4,753.00

NF250CWDC150 NF250CW_ _ _

On Load Switch Disconnectors1 (Red Handle) Standard Ratings 125, 150, 250 A TYPE

POLES

TERMINALS

DSN125-CWA DSN125-SWA DSN125-SGW DSN250-CWA

3 3 3 3

DSN250-SWA DSN250-SGW

3 3

G1 G1 G1 G1 G1 G1 G1

ICW kA 2 2 2 4 4 4 4

SEC.

RATING (A)

PRICE EA.

1 1 1 1 1 1 1

125 125 125 150 250 250 250

1,323.00 1,563.00 2,372.00 2,155.00 3,581.00 3,754.00 3,754.00

*Thermal Adjustable. 1Backed up by Suitable Short Circuit Protection Device (SCPD). 2These breakers can be used in DC applications. Contact CBI for more information.

NOTE: Please fill in required AMP rating on dotted line of order number column.

ORDER No. DSN125CW125 DSN125SW125 DSN125SGW125 DSN250CW150 DSN250CW250 DSN250SW250 DSN250SGW250

NV250-SWA

Earth Leakage Circuit Breakers kA@ SENSITIVITY TYPE POLES TERMINALS 380 V 415 V 480 V 525 V 550 V mA SELECTABLE NV63-HWA 3 G1 10 10 10 7.5 7.5 30,100,500 NV125-SWA 3 G1 25 15 15 18 10 30,175,250 G1 25 15 15 18 10 30,175,250 NV125-HWA* 3 G1 50 30 30 22 18 30,175,250 NV250-SWA 3 G1 25 15 15 18 10 30,250,375 G1 25 15 15 18 10 30,250,375 NV250-SWA 3 G1 25 15 15 18 10 250,375,500 G1 25 15 15 18 10 250,375,500 NV250-HWA* 3 G1 50 30 30 22 18 250,375,500

NO. OF

TIME INTERPHASE DELAY BARRIERS Inst Inst Inst Inst Inst Inst 0.45,1,2 0.45,1,2 0.45,1,2

2 2 2 2 4 4 4 4 4

RATING (A)

PRICE EA.

ORDER No.

16,20,32,40,50,63 16,20,32,40,50,63 80,100 16,20,32,40,50,63,80,100 125,150,175 200,225,250 125,150,175 200,225,250 125,150,175,200,225

3,449.00 4,642.00 4,925.00 9,132.00 7,073.00 7,947.00 7,174.00 7,946.00 17,134.00

NV63HW_ _ _ NV125SW_ _ _ NV125SW_ _ _ NV125HW_ _ _ NV250SW_ _ _ NV250SW_ _ _ NV250SW_ _ _ NV250SW_ _ _ NV250HW_ _ _

Note: Remote tripping not available on NV63 Series. *Contact CBI for availability

WSS - Dimensions DESCRIPTION

a 75 90 90 105 105 105

NF63 & NV63 (SWA / HWA) NF125 & NV125 (CWA / SWA / HWA) DSN125 (CWA / SWA) NF160 / 250 & NV250 (CWA /SWA / HWA) DSN250 (CWA / SWA) NF125 / 160 / 250 (SGW/HGW)

DIMENSIONS (mm) b 130 130 130 165 165 165

c 68 68 68 68 68 86

THERMAL and MAGNETIC Adjustable Chart - HGW/SGW MAGNETIC1 4,6,8,10 4,6,8,10 4,6,8,10

TYPE NF 125 HGW / SGW 16-25 A NF 125 HGW / SGW 25-40 A NF 125 HGW / SGW 40-63 A NF 125 HGW / SGW 63-100 A NF 125 HGW / SGW 80-125 A NF 160 HGW / SGW 125-160 A NF 250 HGW / SGW 160-250 A 1

Magnetics are adjustable in fixed steps as per adjustability chart. are adjustable in fixed steps as per adjustability chart.

2 Thermals

NOTE: Please fill in required AMP rating on dotted line of order number column.

THERMAL 16,20,25 25,32,40 40,50,63 63,80,100 80,100,125 125,160 160,200,250

WORLD SUPER SERIES ELCBs (16 - 250 A)

NV125-SWA

WSS - EARTH LEAKAGE CIRCUIT BREAKERS

WORLD SUPER SERIES ACCESSORIES (10 - 250 A)

WSS - ACCESSORIES WSS - Accessories TYPE

VOLTAGE RANGE

STD PACK

PRICE EA.

ORDER No.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

582.00 582.00 582.00 582.00 738.00 738.00 738.00 738.00 738.00 948.00 948.00 948.00 948.00 948.00 948.00 948.00 948.00 948.00 948.00 948.00 948.00 948.00 948.00 948.00

UVTNA048-05SWLS UVTNA130-05SWLS UVTNA480-05SWLS UVTNA600-05SWLS UVTNA048-1SWLS UVTNA130-1SWLS UVTNA250-1SWLS UVTNA480-1SWLS UVTNA600-1SWLS UVTNA048-2SWRS UVTNA130-2SWRS UVTNA250-2SWRS UVTNA480-2SWRS UVTNA600-2SWRS UVTNA048-2SWLS UVTNA130-2SWLS UVTNA250-2SWLS UVTNA480-2SWLS UVTNA600-2SWLS UVTSA048-2GSWRS UVTSA130-2GSWRS UVTSA250-2GSWRS UVTSA480-2GSWRS UVTSA600-2GSWRS

1 1 1 1 1 1 1 1 1 1 1 1

346.00 346.00 346.00 351.00 351.00 351.00 578.00 578.00 578.00 578.00 578.00 578.00

SHTA048-05SWRS SHTA240-05SWRS SHTA550-05SWRS SHTA048-1SWRS SHTA240-1SWRS SHTA550-1SWRS SHTA048-2SWRS SHTA240-2SWRS SHTA550-2SWRS SHTA048-2GSWRS SHTA240-2GSWRS SHTA550-2GSWRS

1 1

239.00 239.00

AL-05SWLS AL-05SWRS

1 1 1 1 1 1 1

237.00 237.00 244.00 244.00 263.00 263.00 263.00

AX-05SWLS AX-05SWRS AX-1SWLS AX-1SWRS AX-2SWLS AX-2SWRS AX-2GSWLS

Undervoltage Release NF63 & NV63 (SWA / HWA)

NF125 & NV125 (CWA / SWA / HWA) NF125(CWA / SWA / HWA) (RHS FITTED) NV125 (CWA / SWA / HWA) (LHS FITTED) NF160 / 250 (CWA / SWA / HWA)

NV250 (SWA / HWA)

NF125 / 160 / 250 (SGW / HGW)

LH LH LH LH LH LH LH LH LH RH RH RH RH RH LH LH LH LH LH RH RH RH RH RH

24 / 48 V AC 100-110 / 120-130 V AC 380-415 / 440-480 V AC 500-550 / 600 V AC 24 / 48 V AC 100-110 / 120-130 V AC 200-220 / 230-250 V AC 380-415 / 440-480 V AC 500-550 / 600 V AC 24 / 48 V AC 100-110 / 120-130 V AC 200-220 / 230-250 V AC 380-415 / 440-480 V AC 500-550 / 600 V AC 24 / 48 V AC 100-110 / 120-130 V AC 200-220 / 230-250 V AC 380-415 / 440-480 V AC 500-550 / 600 V AC 24 / 48 V AC 100-110 / 120-130 V AC 200-220 / 230-250 V AC 380-415 / 440-480 V AC 500-550 / 600 V AC

Shunt Trip1 NF63 (SWA / HWA) NV125 = LHS NF125 (CWA / SWA / HWA) NV125 = LHS NF160 / 250 (CWA / SWA / HWA)

NF125 / 160 / 250 (SGW/HGW)

RH RH RH RH RH RH RH RH RH RH RH RH

24-48 V AC 100-240 V AC 380-550 V AC 24-48 V AC 100-240 V AC 380-550 V AC 24-48 V AC 100-240 V AC 380-550 V AC 24-48 V AC 100-240 V AC 380-550 V AC

Trip Alarm NF63 (SWA / HWA)

LH RH

NF63 (SWA / HWA)

LH RH LH RH LH RH LH

Auxiliary Switch NF125 (CWA / SWA / HWA) NF160 / 250 (CWA / SWA / HWA) NF125 / 160 / 250 (SGW / HGW) 1

For shunt trip possibility on NV breakers, contact CBI.

WSS - Accessories TYPE

VOLTAGE RANGE

STD PACK

PRICE EA.

ORDER No. ALAX-05SWLS ALAX-05SWRS ALAX-1SWLS ALAX-2SWLS

Alarm/Auxiliary Switch NF63 (SWA / HWA) NF125 & NV125 (CWA / SWA / HWA) NF160 / 250 & NV250 (CWA / SWA / HWA) NF125 / 160 / 250 (SGW / HGW)

LH RH LH LH

1 1 1 1

510.00 510.00 501.00 613.00

709.00

ALAX-2GSWLS

709.00

ALAX-2GSWRS

Terminal Covers NF63 & NV63 (SWA / HWA)

84.00

TCL-05SW3W

NF125 & NV125 (CWA / SWA / HWA) NF160 / 250 & NV250 (CWA / SWA / HWA) NF125 / 160 / 250 (SGW / HGW)

2 2 2

205.00 550.00 550.00

TCL-1SW3W TCL-2SW3W TCL-2GSW3

83.00

ADAPT125

1 1 1

1,236.00 1,236.00 1,236.00

12MEC.1145 12MEC.1045 12MEC.1245

1 1 1

9,830.00 9,830.00 9,830.00

MD250GSW240 2 MDS240-1SW 3 MDS240-2SW

Adaptor Plate1 NF125 (CWA / SWA / HWA)

Daros Handles NF63 & NV63 (SWA / HWA) NF125 / NV125 NF160 / 250 & NV250 (CWA / SWA / HWA) NF160 / 250 (SGW / HGW)

(Std shaft - 300 mm) (Std shaft - 300 mm) (Std shaft - 300 mm)

NF125 / 160 / 250 (SGW / HGW) / 125SW NF125 (CWA / SWA / HWA) NF250 (CWA / SWA / HWA)

100-240 V AC / 100-250 V DC 100-240 V AC / 100-250 V DC 100-240 V AC / 100-250 V DC

Motor Operator

Adaptor plate must be used when retro-fitting NF125 in place of NF100 breaker. These units have mechanical trip indication on the operators. 3 These units have electrical trip indication through an alarm switch. 2

WORLD SUPER SERIES ACCESSORIES (10 - 250 A)

WSS - ACCESSORIES

WORLD SUPER SERIES MCCBs (200 - 1600 A)

WSS - Circuit Breakers / Switch Disconnectors

NF400-SEW

DSN400-CWA

Thermal-Magnetic Circuit Breakers (CWA) Compact Economy Class (CIF Approved) TYPE

POLES

TERMINALS

NF400-CWA

NF630-CWA

G4B G4B G4B G4B

Standard Ratings: 250, 300, 350, 400, 500, 630 A kA@ NO. OF INTERPHASE 400 V 500 V BARRIERS 36 22 4 36 22 4 36 22 4 36 22 4

RATING (A)

PRICE EA.

ORDER No.

250 300 350,400 500,600,630

6,792.00 7,813.00 8,191.00 12,705.00

NF400CW250 NF400CW300 NF400CW_ _ _ NF630CW_ _ _

Thermal-Magnetic Circuit Breakers (SWA) Standard Fixed Type (CIF Approved) TYPE

POLES

TERMINALS

NF400-SWA2

NF630-SWA2

G4B G4B G4B G4B

Standard Ratings: 250, 300, 350, 400, 500, 600, 630 A kA@ NO. OF INTERPHASE RATING (A) 400 V 500 V 525 V BARRIERS 50 40 35 4 250 50 40 35 4 300 50 40 35 4 350,400 50 40 35 4 500,600,630

PRICE EA.

ORDER No.

9,124.00 9,201.00 9,599.00 14,107.00

NF400SW250 NF400SW300 NF400SW_ _ _ NF630SW_ _ _

Electronic Adjustable Circuit Breakers (CIF Approved) TYPE NF400-SEW NF400-HEW NF630-SEW NF630-HEW NF800-CEW NF800-SEW NF800-HEW

Standard Ratings: 200-400 A, 300-630 A, 400-800 A, 500-1000 A, 600-1250 A, 800-1600 A kA@ NO. OF INTERPHASE POLES TERMINALS RATING (A) PRICE EA. 380 V 400 V 500 V 525 V BARRIERS 3 G4B 50 50 40 35 4 200-400 11,316.00 3 G4B 70 70 50 50 4 200-400 16,581.00 3 G4B 50 50 40 35 4 300-630 18,348.00 3 G4B 70 70 50 4 300-630 20,557.00 3 G4B 40 36 18 2 400-800 19,756.00 3 G4B 50 50 40 25 2 400-800 22,437.00 3 G4B 70 70 50 2 400-800 24,680.00

ORDER No. NF400SEW400 NF400HEW400 NF630SEW630 NF630HEW630 NF800CEW800 NF800SEW800 NF800HEW800

Electronic Adjustable Circuit Breakers (CIF Approved) TYPE

POLES

TERMINALS

NF1000-SEW NF1250-SEW NF1600-SEW

3 3 3

G4B G4B G4B

Standard Ratings: 500-1000 A, 600-1250 A, 800-1600 A kA@ NO. OF INTERPHASE 380 V 400 V 500 V BARRIERS 85 85 65 2 85 85 65 2 85 85 65 2

RATING (A)

PRICE EA.

ORDER No.

500-1000 600-1250 800-1600

25,272.00 30,186.00 43,627.00

NF1000SEW NF1250SEW NF1600SEW

Circuit Breaker DC Locomotive Protection (Orange Handle) TYPE

POLES

TERMINALS

NF400-CWA (DC)

G4B

Standard Ratings: 300, 400 A kA@ NO. OF INTERPHASE 440 V DC BARRIERS 15 4 15 4

RATING (A) 300 400

PRICE EA.

ORDER No.

8,342.00 8,609.00

NF400CWDC300 NF400CWDC400

ON LOAD SWITCH DISCONNECTORS1 (Red Handle) TYPE DSN400-CWA DSN400-SWA DSN630-CWA DSN630-SWA DSN800-CWA DSN800-SWA DSN1000-SW DSN1250-SW

POLES

TERMINALS

3 3 3 3 3 3 3 3

G4B G4B G4B G4B G4B G4B G4B G4B

Standard Ratings: 300, 400, 630, 800, 1000, 1250 A ICW RATING (A) kA SEC. 6 1 300,400 6 1 400 8 1 630 8 1 630 10 1 800 10 1 800 15 1 1000 15 1 1250

1Backed up by Suitable Short Circuit Protection Device (SCPD). 2These breakers can be used in DC Applications. Contact CBI for more information.

NOTE: Please fill in required AMP rating on dotted line of order number column.

PRICE EA.

ORDER No.

5,342.00 7,324.00 8,986.00 12,063.00 12,477.00 14,598.00 21,450.00 27,342.00

DSN400CW_ _ _ DSN400SW400 DSN630CW630 DSN630SW630 DSN800CW800 DSN800SW800 DSN1000SW _ _ _ DSN1250SW _ _ _

NV800-SEW

Earth Leakage Circuit Breakers Progressive Super Series POLES TERMINALS

TYPE

NV400-SWA NV400-SEW NV630-SWA NV800-SEW

3 3 3 3

G4B G4B G4B G4B

kA@ 380 V 400 V 525 V 550 V

SENSITIVITY mA SELECTABLE

50 50 50 50

100,300,500 100,300,500 100,300,500 100,300,500

50 50 50 50

15 15 25 25

15 15 15 15

TIME DELAY

No. OF INTERPHASE BARRIERS

RATING (A)

PRICE EA.

ORDER NO.

4 4 4 2

250,300,350,400 200-400 500,600,630 400-800

15,994.00 17,188.00 19,550.00 22,122.00

NV400SW_ _ _ NV400SEW400 NV630SW_ _ _ NV800SEW800

0.45, 1,2 0.45, 1,2 0.45, 1,2

a b PSS/WSS - Dimensions

DIMENSIONS (mm)

TYPE NF400 & NV400 (CWA / SWA / SEW / HEW) DSN400 (CWA / SWA) NF630 & NV630 (SEP / HEP) NF630 & NV630 (CWA / SWA / SEW / HEW) DSN630 (CWA / SWA) NF800 & NV800 (CWA / SWA / SEW / HEW) DSN800 (CWA / SWA) NF1000 & NV1250 & NF1600 (SEW) DSN1000 & DSN1250 (SW)

257 257 275 257 257 275 275 406 406

140 140 210 140 140 210 210 210 210

103 103 103 103 103 103 103 140 140

WSS - Current Setting Range (Adjustable Breakers) TYPE NF400-SEW (CEW / SEW / HEW) NF630-SEW (CEW / SEW / HEW) NF800-SEW (CEW / SEW / HEW) NF1000-SEW NF1250-SEW NF1600-SEW Notes: For availability and price of NV4P breakers, contact CBI.

RATING (A)

SETTING RANGE (fixed steps)

200-400 300-630 400-800 500-1000 600-1250 800-1600

200 / 225 / 250 / 300 / 350 / 400 A 300 / 350 / 400 / 500 / 600 / 630 A 400 / 450 / 500 / 600 / 700 / 800 A 500 / 600 / 700 / 800 / 900 / 1000 A 600 / 700 / 800 / 1000 / 1200 / 1250 A 800 / 1000 / 1200 / 1400 / 1500 / 1600 A

WORLD SUPER SERIES ELCBs (250 - 800 A)

NV400-SEW

WORLD SUPER SERIES ACCESSORIES

WSS - ACCESSORIES WSS - Accessories TYPE

VOLTAGE RANGE

STD PACK

PRICE EA.

ORDER No.

1 1 1 1 1 1 1 1 1 1

2,092.00 2,092.00 1,281.00 1,281.00 1,281.00 1,281.00 1,888.00 1,888.00 1,888.00 1,888.00

UVTSD048-8SWRFS UVTD110-4SWS UVTA120-4SWS UVTA240-4SWS UVTA415-4SWS UVTA550-4SWS UVTNA130-10SWRS UVTNA240-10SWRS UVTNA450-10SWRS UVTNA550-10SWRS

1 1 1 1 1 1 1 1 1 1

1,197.00 712.00 712.00 712.00 1,801.00 1,801.00 1,801.00 1,801.00 1,801.00 1,801.00

SHT48-4SWRS SHT-4SWLS SHT-4SWRS SHTA550-4SWRS SHTA024-10SWRS SHTA048-10SWRS SHTA120-10SWRS SHTA240-10SWRS SHTA450-10SWRS SHTA550-10SWRS

498.00

AL-4SWLS

1 1 1 1 1 1

463.00 463.00 463.00 463.00 643.00 643.00

AX-4SWLS AX-4SWRS AX-4SWLS AX-4SWLS AX-10SWLS AX-10SWRS

605.00

ALAX-4SWLS

1,064.00

ALAX-10SWLS

1 1 1 1 1 1

6,227.00 6,227.00 6,227.00 6,227.00 32,295.00 32,295.00

MDS-4SWA110 MDS-4SWA220 MDS-8SWA110 MDS-8SWA220 MD-10SWA110 MD-10SWA220

4,913.00

MI630

4,913.00

MI1000

Set Set Set

1,151.00 1,863.00 2,345.00

ST-4SW3 ST-6SW3 ST-8SW3

Undervoltage Release NF400 / 630 / 800 & NV400 / 630 / 800 (CW / SW / CEW / SEW / HEW)

NF1000SEW & NF1250SEW & NF1600SEW

RH LH/RH LH/RH LH/RH LH/RH LH/RH RH RH RH RH

24-48 V DC 110 V DC 110-120 V AC 220-240 V AC 380-415 V AC 500-550 V AC 100-120 V AC 200-240 V AC 380-450 V AC 500-550 V AC

Shunt Trip1 NF400 / 630 / 800 (CW / SW / CEW / SEW / HEW) RH 24-48 V AC / DC LH 100-450 V AC / 100-200 V DC RH 100-450 V AC / 100-200 V DC RH 380-550 V AC NF1000SEW & NF1250SEW & NF1600SEW RH 24 V AC RH 48 V AC RH 100-120 V AC RH 200-240 V AC RH 380-450 V AC RH 500-550 V AC

Alarm Switch NF400 / 630 / 800 & NV400 / 630 / 800 (CW / SW / CEW / SEW / HEW)

Auxiliary Switch NF400 / 630 / 800 (CW / SW / CEW / SEW / HEW) LH RH NV400 / 630 / 800 (SW / SEW) LH NV400 / 630 / 800 (SW / SEW) LH NF1000SEW & NF1250SEW & NF1600SEW LH RH

Alarm/Auxiliary Switch NF400 / 630 / 800 & NV400 / 630 / 800 (CW / SW / CEW / SEW / HEW) NF1000SEW & NF1250SEW & NF1600SEW

LH LH

Motor Operator* NF400 / 630 & NV400 / 630 (CW / SW / CEW / SEW / HEW) NF800 & NV800 (CEW / SEW / HEW) NF1000SEW & NF1250SEW & NF1600SEW

100-110 V AC 200-220 V AC 100-110 V AC 200-220 V AC 100-110 V AC 200-220 V AC

Mechanical Interlock* NF400 / 630 / 800 & NV400 / 630 / 800 (CW / SW / CEW / SEW / HEW) NF1000SEW & NF1250SEW & NF1600SEW

Rear Connecting Studs* NF400 & NV400 (CW / SW / CEW / SEW / HEW) NF630 & NV630 (CW / SW / CEW / SEW / HEW) NF800 & NV800 (CEW / SEW / HEW)

Set of 6 Set of 6 Set of 6

For shunt trip possibility on NV breakers, contact CBI. *Contact CBI for availability.

TYPE

VOLTAGE RANGE

STD PACK

PRICE EA.

ORDER No.

625.00

TCL-4SW3

1 1

781.00 1,214.00

TCL-8SW3 TCL-10SW3

314.00

HLS-4SW

2,209.00

HLS-10SW

(Std. shaft - 300 mm)

1,323.00

12MEC.0645

(Std. shaft - 300 mm) (Std. shaft - 300 mm)

1 1

1,719.00 2,209.00

12MEC.0845 12MEC.0945

Terminal Covers* NF400 / 630 & NV400 / 630 (CW / SW / CEW / SEW / HEW) NF800 & NV800 (CEW / SEW / HEW) NF1000SEW & NF1250SEW & NF1600SEW

Handle Locking Device (Metal)* NF400 / 630 & NV400 / 630 (CW / SW / CEW / SEW / HEW) NF1000 / 1250 / 1600 SEW

Daros Handles NF400 / 630 & NV400 / 630 (CW / SW / CEW / SEW / HEW) NF800 & NV800 (CEW / SEW / HEW) NF1000SEW & NF1250SEW & NF1600SEW

*Contact CBI for availability Note: Walking Beam Interlock Mechanisms: Two Daros "MEC" handle mechanisms (one on Breaker A and one on Breaker B) required operations: i. Breaker A is "OFF" and Breaker B is "OFF" ii. Breaker A is "ON" and Breaker B is "OFF" iii. Breaker A is "OFF" and Breaker B is "ON"

WORLD SUPER SERIES ACCESSORIES

WSS - ACCESSORIES

AIR CIRCUIT BREAKERS

AE1600-SW

AE WORLD SUPER SERIES LOW VOLTAGE AIR CIRCUIT BREAKERS (CIF APPROVED) Air Circuit Breakers1

TYPE

POLES

TERMINALS

AE630-SW AE1000-SW AE1250-SW AE1600-SW AE2000-SW AE2500-SW AE3200-SW AE2000-SWA* AE4000-SWA

3 3 3 3 3 3 3 3 3

Horizontal Stubs Horizontal Stubs Horizontal Stubs Horizontal Stubs Horizontal Stubs Horizontal Stubs Horizontal Stubs Vertical Stubs Vertical Stubs

Standard Ratings: 315-630, 500-1000, 625-1250, 800-1600, 1000-2000,1250-2500,1600-3200, 2000-4000 A kA@ STD PRICE EA. RATING (A) 525 V 690 V PACK FIXED (F)3 65 65 1 315-630 30,136.00 65 65 1 500-1000 31,674.00 65 65 1 625-1250 33,344.00 65 65 1 800-1600 35,211.00 75 75 1 1000-2000 41,921.00 75 75 1 1250-2500 48,372.00 75 75 1 1600-3200 61,007.00 65 65 1 1000-2000 38,566.00 75 75 1 2000-4000 97,909.00

PRICE EA. DRAW OUT (D)3 40,809.00 42,938.00 43,756.00 44,575.00 54,886.00 58,062.00 72,530.00 49,728.00 119,262.00

ORDER No. AE630SW(F/D) AE1000SW(F/D) AE1250SW(F/D) AE1600SW(F/D) AE2000SW(F/D) AE2500SW(F/D) AE3200SW(F/D) AE2000SWA(F/D) AE4000SWA(F/D)

AE WORLD SUPER SERIES LOW VOLTAGE SWITCH DISCONNECTORS Switch Disconnectors2 TYPE

POLES

DSN AE1600-SW DSN AE2500-SW DSN AE3200-SW DSN AE2000-SWA* DSN AE4000-SWA*

3 3 3 3 3

Standard Ratings: 1600, 2000, 2500, 3200, 4000 A STD PRICE EA. TERMINALS RATING (A) PACK FIXED (F)3 Horizontal Stubs 1 1600 30,070.00 Horizontal Stubs 1 2500 42,642.00 Horizontal Stubs 1 3200 53,969.00 Vertical Stubs 1 2000 33,214.00 Vertical Stubs 1 4000 88,431.00

PRICE EA. DRAW OUT (D)3 39,302.00 52,364.00 65,527.00 44,311.00 107,703.00

ORDER No. DSN1600SW(F/D) DSN2500SW(F/D) DSN3200SWA(F/D) DSN2000SWA(F/D) DSN4000SWA(F/D)

Note: Standard discounts are not applicable. Contact CBI for discount structure. For ACBs bigger than 4000 A (5000 A & 6300 A), contact CBI for price and availability. 1

All ACBs come complete with terminal connectors, aux(2a, 2b), door frame (Draw-out ACB also has safety shutters) and Electronic Trip Relay (ETR). All Switch Disconnecters come complete with terminal connectors, aux(2a, 2b) and door frame (Draw-out DSN also has safety shutters). 3 Ordering numbers Fixed = (F) Draw out = (D) 2

*Contact CBI for availability.

Air Circuit Breakers Type AE630-SW to AE4000-SWA VOLTAGE AC Door Interlock* for all Draw Out Types Door Interlock* for all Fixed Types Cell Switch* (4 Contacts) Auxiliary Switch (5N/O + 5N/C) Shunt Trip 100-250 Shunt Trip* Shunt Trip 380-525 Motor Charging Device 100-125 Motor Charging Device 200-250 Closing Coil Unit 100-250 Closing Coil Unit Cylinder Lock Mechanism with Viro Key Counter* Undervoltage Tripping Device - instantaneous (tripping coil included) 100-120 Undervoltage Tripping Device - instantaneous (tripping coil included) 200-240 Undervoltage Tripping Device Time Delay - (tripping coil included) 200-240 Undervoltage Tripping Device - instantaneous (tripping coil included) 380-460 Push Button Cover (For Padlocking) Misinsertion Preventer* Terminal Connectors on Breaker Terminal Connectors on Cradle Ground Fault Protection Relay* (module must be fitted to ETR) Mechanical Interlock Device (Draw out Type Only) (630SW - 1600SW, 2000SWA) Mechanical Interlock Device (Fixed Type Only) (630SW - 1600SW, 2000SWA) Mechanical Interlock Device (Draw out Type Only) (2000SW - 3200SW, 4000SWA) Mechanical Interlock Device (Fixed Type Only) (2000SW - 3200SW, 4000SWA) Mechanical Interlock Wire Set* (used when 3 ACBs are interlocked) Shutter Locking Parts* (Padlock Excluded) Safety Shutter (AE630SW - AE1600SW, AE2000SWA) Safety Shutter (AE2000SW - AE3200SW, AE4000SWA) Cradle* (AE630SW - AE1600SW) - (Excluding Safety Shutters) Cradle* (AE2000SW - AE2500SW) - (Excluding Safety Shutters) Cradle* (AE3200SW) (Excluding Safety Shutters) Vertical Terminal Adaptor* (Draw out) Set of 3 (AE630SW - AE1600SW) Vertical Terminal Adaptor* (Draw out) Set of 3 (AE2000SW - AE2500SW) Vertical Terminal Adaptor* (Draw out) Set of 3 (AE3200SW) Extension Module (EX1)* - (compulsory module for display and interface function) Display Module (DP1)* - (WS - EX1 is required) VT Unit (VT)* - (WS - EX1 is required) CC-Link Interface Unit* - (WS - EX1 is required) Drawout Position Switch for Network* - (WS-BIF-IO is required) I/O Unit* - (interface unit is required ex WS - BIF - PR) PROFIBUS-DP Interface Unit* - (WS - EX1 is required) Modbus Interface Unit* - {WS - EX1 is required) Neutral Pole Current Transformer* (AE1600SW) Neutral Pole Current Transformer* (AE2000SW, AE2000SWA) Neutral Pole Current Transformer* (AE2500SW) Neutral Pole Current Transformer* (AE3200SW) Neutral Pole Current Transformer* (AE4000SWA) -

TYPE

Note: Standard discounts are not applicable, contact CBI for discount structure. *Contact CBI for availability.

VOLTAGE STD PRICE EA. DC PACK 1 4,849.00 1 5,217.00 1 2,898.00 1 1,854.00 100-250 1 1,316.00 24-48 1 1,316.00 1 1,316.00 100-125 1 3,937.00 200-250 1 3,937.00 100-250 1 1,650.00 24-48 1 2,084.00 1 2,207.00 1 1,855.00 1 4,636.00 1 4,636.00 1 4,636.00 1 7,476.00 1 293.00 1 581.00 1 1,260.00 1 1,260.00 1 1,451.00 1 3,937.00 1 3,937.00 1 3,937.00 1 3,937.00 1 1,943.00 1 147.00 1 1,226.00 1 1,226.00 1 7,517.00 1 12,124.00 1 12,124.00 1 3,260.00 1 5,754.00 1 6,901.00 1 3,675.00 1 4,059.00 1 2,609.00 1 7,244.00 1 2,320.00 1 3,478.00 1 7,244.00 1 7,244.00 1 2,758.00 1 2,758.00 1 3,678.00 1 3,678.00 1 3,678.00

ORDER No. WS-DI-SAED WS-DI-SAEF WS-CLCCELLS WS-AXAESW5A5B WS-SHTAE110AC WS-SHTAE24DC WS-SHTAE400AC WS-MDAESW110 WS-MDAESW220 WS-CCAE025A WS-CCAED048A WS-CYLAESW WS-CNTAESW WS-UVT-A120-INS WS-UVT-A240-INS WS-UVT-A240-TD3 WS-UVT-A460-INS WS-BCL-SAE WS-MIPAESW WS-ATC-SAEBKR WS-ATC-SAECRL WS-G1 WS-MIAESW16D WS-MIAESW16F WS-MIAESW32D WS-MIAESW32F WS-Ml-IW WS-SSTAESW WS-SSTAESW160 WS-SSTAESW400 WS-AE1600SSCR WS-AE2000SSCR WS-AE3200SSCR WS-VTA-02SAC WS-VTA-03SAC WS-VTA-32SAE WS-EX1 WS-DISPLAY WS-VT WS-BIF-CC WS-BIF-DO-POS WS-BIF-IO WS-BIF-PR WS-BIF-MD WS-NCTAESW16 WS-NCTAESW20 WS-NCTAESW25 WS-NCTAESW32 WS-NCTAESW40

AIR CIRCUIT BREAKER ACCESSORIES

WORLD SUPER SERIES ACCESSORIES

MAGNETIC CONTACTORS

SERIES S-N (CIF APPROVED) - AC CONTACTOR, AC COIL

S-N95

Magnetic Contactors Series S-N (CIF Approved) RATED AC-1 AC-3 CONTINUOUS 380 V/440 V 525 V 380 V/440 V 525 V CURRENT (A) (A) kW (A) kW (A)

TYPE2 S-N103 S-N113 S-N123 S-N183 S-N203 S-N213 S-N253 S-N353 S-N503 S-N653 S-N80 S-N95 S-N125 S-N150 S-N180 S-N220 S-N300 S-N400 S-N600 S-N800

20 20 20 25 32 32 50 60 80 100 135 150 150 200 260 260 350 450 800 1000

11 13 13 20 32 32 50 60 80 100 135 150 150 200 260 260 350 450 660 800

8 11 11 16 32 32 50 60 80 100 135 150 150 200 260 260 350 450 660 800

4(9) 5.5 (12) 5.5 (12) 7.5 (16) 11 (22) 11( 22) 15 (30) 18.5 (40) 22 (50) 30 (65) 45 (85) 55 (105) 60 (120) 75 (150) 90 (180) 132 (250) 160 (300) 220 (400) 330 (630) 440 (800)

4 (7) 5.5 (9) 5.5 (9) 7.5 (13) 11 (17) 11 (17) 15 (24) 18.5 (32) 22 (38) 37 (60) 45 (75) 55 (85) 60 (90) 90 (140) 110 (180) 132 (200) 160 (250) 225 (350) 330 (500) 500 (720)

AC-4 380 V/440 V

525V

kW (A)

1.1 (6) 1.5 (9) 1.5 (9) 2.2 (9) 3. 7 (13) 3.7 (13) 5.5 (17) 5. 5 (24) 7.5 (32) 11 (47) 15 (62) 18.5 (75) 22 (90) 30 (110) 37 (150) 45 (180) 60 (220) 75 (300) 110 (400) 130 (630)

1.1 (6) 1.5 (9) 1.5 (9) 2.2 (9) 3.7 (10) 3.7 (10) 5.5 (12) 5.5 (17) 7.5 (24) 11 (38) 15 (45) 18.5 (55) 22 (65) 37 (80) 45 (140) 55 (140) 60 (200) 90 (250) 130 (350) 150 (500)

STANDARD AUX CONTACTS1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Note: DIN rail mounting for all contactors up to SN-65 1Extra auxiliary contact blocks can be added (refer to contactor spares and accessories) 2When ordering please specify coil voltage e.g. SN10-400. 3These units have finger protection on terminals as standard (CX).

Standard coil voltages are 110 V, 220 V, 400 V, 525 V. Other voltages available on request.

Contactor Utilisation Categories (IEC 60947.4) ALTERNATING CURRENT AC-1

All AC Loads with a power factor ≥ 0.80 - heating distribution

AC-3

Starting and stopping squirrel cage motors - starting ±7 times rated motor current - stopping the voltage is at ±20 % of mains supply voltage - light breaking

AC-4

Plugging and inching of squirrel cage - closing and opening at ±7 times rated motor current - severe breaking

AC-15

Control of electromagnetic loads (>72 VA)

DC-13

Control of electromagnets

DIRECT CURRENT Note: For new rating of auxiliary contacts for SN/SDN contactors see table 1 on page 61.

PRICE EA.

ORDER NO.

365.00 436.00 501.00 602.00 754.00 816.00 1,015.00 1,306.00 1,673.00 2,058.00 3,056.00 3,919.00 4,419.00 6,442.00 7,295.00 8,283.00 15,159.00 19,405.00 26,919.00 34,610.00

SN10-_ _ _ SN11-_ _ _ SN12-_ _ _ SN18-_ _ _ SN20-_ _ _ SN21-_ _ _ SN25-_ _ _ SN35-_ _ _ SN50-_ _ _ SN65-_ _ _ SN80-_ _ _ SN95-_ _ _ SN125-_ _ _ SN150-_ _ _ SN180-_ _ _ SN220-_ _ _ SN300- _ _ _ SN400-_ _ _ SN600-_ _ _ SN800-_ _ _

NORMALLY NORMALLY OPEN CLOSED

1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Magnetic Contactors Series S-N Contact Coils CONTACTOR TYPE SN10 SN11 SN12 SN18 SN20 SN21 SN25 SN35 SN50 SN65 SN80 SN95 SN125 SN150 SN180 SN220 SN300 SN400 SN600 SN800 SDN12 SDN21 SDN35 SDN50 SDN65 SDN80 SDN95 SDN125 SDN150 SDN220 SDN300 SDN400 SDN600 SDN800 SRN4 SRDN DU-A60 DU-A120 DU-K180 DU-K260 DUD-A60 DUD-A120 DUD-K180 DUD-K260 SD-Q11 SD-Q12 SD-Q19

COIL PRICE EA.

ORDER NO.

151.00 151.00 151.00 151.00 195.00 195.00 247.00 247.00 364.00 364.00 614.00 614.00 1,563.00 1,563.00 1,839.00 1,839.00 2,417.00 2,417.00 2,417.00 2,417.00 385.00 909.00 1,058.00 1,299.00 1,299.00 1,447.00 1,447.00 1,108.00 1,108.00 2,936.00 8,717.00 8,717.00 9,611.00 9,611.00 151.00 385.00 POR POR POR POR POR POR POR POR POR POR POR

SN10-...C

NOTE: ORDER NUMBER EXAMPLE: Contactor Type + Coil Voltage + “C” i.e.: SN10 -110C SDN80-110C

SN21-...C SN25-...C SN50-...C SN80-...C SN125-...C SN180-...C SN300-...C SN600-...C

SDN21-...C SDN35-...C SDN50-...C SDN80-...C SDN125-...C SDN220-...C SDN300-...C SDN600-...C SN10-...C SN10-...C DU_.COIL DC- ...V DU_.COIL DC- ...V SN180-...C SN300-...C DU_.COIL DC- ...V DU_.COIL DC- ...V DU_.COIL DC- ...V DU_.COIL DC- ...V 24 V DC 24 V DC 24 V DC

CONTACTOR ACCESSORIES

ACCESSORIES

UNML220

530.00 530.00 530.00 530.00 530.00 530.00 -

701.00 701.00 -

PRICE EACH 701.00 701.00 701.00 701.00 701.00 701.00 701.00

UNAX11 (1A, 1B)

UNML150

512.00 512.00 512.00 512.00 512.00 512.00 512.00 512.00 512.00 512.00 512.00 -

UNAX4 (2A,2B) UNAX4CX3A (3A,1B) UNAX4CX4A (4A)

UNML80

428.00 428.00 428.00 -

UNAX2 (1A,1B) UNAX2CX2A (2A) UNAX2CX2B (2B)

UNML21

TYPE SN10 SN11 SN12 SN18 SN20 SN21 SN25 SN35 SN50 SN65 SN80 SN95 SN125 SN150 SN180 SN220 SN300 SN400 SN600 SN800 SDN11 SDN12 SDN21 SDN35 SDN50 SDN65 SDN80 SDN95 SDN125 SDN150 SDN220 SDN300 SDN400

SIDE CLIP-ON AUX. CONTACT BLOCK (1,3)

FRONT CLIP-ON AUX. CONTACT BLOCK (1,2)

MECHANICAL INTERLOCK

UNML11

CONTACTOR ACCESSORIES

ACCESSORIES

204.00 204.00 204.00 204.00 204.00 204.00 204.00 204.00 204.00 204.00 204.00 204.00 204.00 204.00 204.00 204.00 -

268.00 268.00 268.00 268.00 268.00 268.00 268.00 268.00 268.00 268.00 268.00 268.00 268.00 268.00 268.00 268.00 -

277.00 277.00 277.00 277.00 277.00 277.00 277.00 277.00 277.00 277.00 277.00 277.00 277.00 -

1Front clip-on & side clip-on should not be both mounted. 2Max 1 aux contact block can be mounted on a contactor. 3Max 2 aux contact block can be mounted on a contactor. 4Price includes fitting and adjusting.

Note: *Contact CBI for availability A = Normal Open Contact B = Normal Closed Contact

550.00 550.00 -

UNSY32 (DIRECT MOUNTING ON CONTACTOR)

PRICE EACH 505.00 505.00 505.00 505.00 505.00 505.00 505.00 505.00 505.00 -

UNSY22 (DIRECT MOUNTING ON CONTACTOR)

550.00 550.00 550.00 550.00 550.00 550.00 550.00 550.00 . -

UNSY12 (SEPARATE MOUNTING)

2,036.00 2,036.00 2,036.00 2,036.00 -

DC INTERFACE MODULE RELAY UNSY31 (DIRECT MOUNTING ON CONTACTOR)

287.00 287.00 287.00 287.00 287.00 287.00 287.00 287.00 287.00 POR -

DC INTERFACE MODULE SOLID STATE UNSY21 (DIRECT MOUNTING ON CONTACTOR)

UNAX600 (2A, 2B)

268.00 268.00 268.00 . 268.00 268.00 268.00 POR -

UNSY11 (SEPARATE MOUNTING)

UNAX150 (1A, 1B)

TYPE SN10 SN11 SN12 SN18 SN20 SN21 SN25 SN35 SN50 SN65 SN80 SN95 SN125 SN150 SN180 SN220 SN300 SN400 SN600 SN800 SDN11 SDN12 SDN21 SDN35 SDN50 SDN65 SDN80 SDN95 SDN125 SDN150 SDN220 SDN300 SDN400 SDN600 SDN800 DU(D)A DU(D)K SRN4 SRDN4

UNAX80 (1A1B)

ORDER No.

SIDE CLIP-ON AUX. CONTACT BLOCK

. 550.00 550.00 550.00 550.00 550.00 550.00 550.00 550.00 -

505.00 505.00 505.00 505.00 505.00 505.00 505.00 505.00 505.00 -

. 550.00 550.00 . -

1Max 2 aux contact block can be mounted on a contactor.

Note: *Contact CBI for availability A = Normal Open Contact B = Normal Closed Contact

CONTACTOR ACCESSORIES

ACCESSORIES

THERMAL OVERLOAD RELAYS SERIES TH-N

SERIES TH-N

TH-N12KP

Thermal Overload Relays Series TH-N Heater Type TYPE

CONTACTOR SIZE

THN12-0.17 THN12-0.24 THN12-0.35 THN12-0.5 THN12-0.7 THN12-0.9 THN12-1.3 THN12-1.7 THN12-2.1 THN12-2.5 THN12-3.6 THN12-5 THN12-6.6 THN12-9 THN12-11

S-N10- (CX), S-N11- (CX), S-N12- (CX).

THN18-15

S-N18(CX)

THN20-0.24 THN20-0.35 THN20-0.5 THN20-0.7 THN20-0.9 THN20-1.3 THN20-1.7 THN20-2.1 THN20-2.5 THN20-3.6 THN20-5 THN20-6.6 THN20-9 THN20-11 THN20-15 THN20-19 THN20-22 THN20-29 THN20-35

S-N20 (CX), S-N21 (CX), S-N25 (CX), S-N35 (CX).

S-N25 (CX), S-N35 (CX).

OVERLOAD SIZE AMPS TH-N12KP(CX)1 0.17 0.24 0.35 0.5 0.7 0.9 1.3 1.7 2.1 2.5 3.6 5 6.6 9 11 TH-N18KP(CX)2 15 TH-N20KP(CX)3 0.24 0.35 0.5 0.7 0.9 1.3 1.7 2.1 2.5 3.6 5 6.6 9 11 15 19 THN20TAKP(CX) 22 29 35

Note 1 For direct connection to contactors. 2 For direct connection to S-N18 only. 3 For the correct connecting links to contactors see thermal overload accessories on p.66. 4 5

For use with contactors S-N20 & S-N21 only. For use with contactors S-N35 only.

ORDER NUMBER = TYPE NUMBER

HEATER RANGE AMPS

PRICE EA.

0.14 - 0.22 0.2 - 0.32 0.28 - 0.42 0.4 - 0.6 0.55 - 0.85 0.7 - 1.1 1.0 - 1.6 1.4 - 2.0 1.7 - 2.5 2.0 - 3.0 2.8 - 4.4 4.0 - 6.0 5.2 - 8.0 7.0 - 11.0 9.0 - 13.0

314.00 314.00 314.00 314.00 314.00 314.00 314.00 314.00 314.00 314.00 314.00 314.00 314.00 314.00 314.00

12.0 - 18.0

314.00

0.2 - 0.32 0.28 - 0.42 0.4 - 0.6 0.55 - 0.85 0.7 - 1.1 1.0 - 1.6 1.4 - 2.0 1.7 - 2.5 2.0 - 3.0 2.8 - 4.4 4.0 - 6.0 5.2 - 8.0 7.0 - 11.0 9.0 - 13.0 12.0 - 18.0 16.0 - 22.0

407.00 407.00 407.00 407.00 407.00 407.00 407.00 407.00 407.00 407.00 407.00 407.00 407.00 407.00 407.00 407.00

18.0 - 26.0 24.0 - 34.0 30.0 - 40.0

407.00 407.00 407.00

TH-N60KP

Thermal Overload Relays Series TH-N Heater Type TYPE2

CONTACTOR SIZE

THN60-15 THN60-22 THN60-29 THN60-35 THN60-42 THN60-541

S-N50, S-N65, S-N80, S-N95.

THN60-67 THN60-82 THN60-953

S-N80, S-N95.

THN120-42 THN120-54 THN120-67 THN120-82

S-N125, S-N150.

THN120-105 THN120-125

S-N125, S-N150.

THN220 - 82 THN220 - 105 THN220 - 125 THN220 - 150 THN220 - 180 THN220 - 2105

S-N180, S-N220.

THN400 - 125 THN400 - 150 THN400 - 180 THN400 - 250 THN400 - 330

S-N300, S-N400.

THN600 - 330 THN600 - 500 THN600 - 660

S-N600, S-N800.

OVERLOAD SIZE AMPS TH-N60KP (CX) 15 22 29 35 42 54 TH-N60TAKP 67 82 95 TH-N120TP 42 54 67 82 TH-N120TAKP 105 125 TH-N220RHKP4 82 105 125 150 180 210 TH-N400RHKP4 125 150 180 250 330 TH-N600KP6 330 500 660

HEATER RANGE AMPS.

PRICE EA.

12 - 18 18 - 26 24 - 34 30 - 40 34 - 50 43 - 65

679.00 679.00 679.00 679.00 679.00 679.00

54 - 80 65 - 93 85 - 105

679.00 679.00 679.00

34 - 50 43 - 65 54 - 80 65 - 100

1,002.00 1,002.00 1,002.00 1,002.00

85 - 125 100 - 150

1,002.00 1,002.00

65 - 100 85 - 125 100 - 150 120 - 180 140 - 200 170 - 250

2,729.00 2,729.00 2,729.00 2,729.00 2,729.00 2,729.00

100 - 150 120 - 180 140 - 220 200 - 300 260 - 400

3,490.00 3,490.00 3,490.00 3,490.00 3,490.00

260 - 400 400 - 600 520 - 800

1,021.00 1,021.00 1,021.00

Current Transformer Specs for TH-N600kP HEATER DESIGNATION (A) 330 500 660

SETTING RANGE (A) 260-400 400-600 520-800

Note: 1 Cannot be mounted onto SN50. 2 For the correct connecting links to contactors see thermal overload accessories on p.66. 3 For contactor size SN95 only. 4 Connecting links included. 5 For contactor size SN220 only. 6 Current transformers not included. CT Class to be Class 1 or better. 7Current transformer to be supplied by customer.

ORDER NUMBER = TYPE NUMBER

CURRENT TRANSFORMER RATIO 500/5 750/5 1000/5

TRANSFORMER CAPACITY 15 V A or more 15 V A or more 140 V A or more

THERMAL OVERLOAD RELAYS SERIES TH-N

SERIES TH-N

THERMAL OVERLOAD ACCESSORIES

ACCESSORIES Connecting Links for TH-N OverloadS & S-N Contactors TYPE UN-TH21 UN-TH25 4370006 4370000 BH579N355 BH589N355 UN-HZ12(CX)

DESCRIPTION Connecting links TH-N20KP (CX) & S-N20 / 21 (CX) Connecting links TH-N20TAKP (CX) & S-N25 / 35 (CX) Connecting links TH-N60KP (CX) & S-N50 / 65 (CX) BH559N350 Connecting links TH-N60TAKP (CX) & S-N80 / 95 BH569N350 + bracket Connecting links TH-N120KP & S-N125 Connecting links TH-N120TAKP & S-N150 Adaptor block for separate mounting of TH-N 12KP (CX)

PRICE EA. 142.00 165.00 159.00 204.00 225.00 225.00 296.00

Note: TH-N220RHKP have connecting bars & base plate included. TH-N400RHKP have connecting bars & base plate included.

Remote Reset Release TYPE UN-RR205* UN-RR405* UN-RR550* UN-RR555* UN-RR705*

DESCRIPTION Remote reset forTH-N 12 18 200 mm Remote reset for TH-N 12 18 400 mm Remote reset for TH-N20 550 mm Remote reset for TH-N 12 18 550 mm Remote reset for TH-N 12 18 700 mm

Note: *Contact CBI for availability.

PRICE EA. 319.00 319.00 641.00 641.00 650.00

Electronic Motor Protection Relays Type ET-N TYPE ETN60-1 -110 OR 220 ETN60-4-110 OR 220 ETN60-8-110 OR 220 ETN60-20-110 OR 220 ETN60-60-110 OR 220 ETN60-1-400 OR 525 ETN60-4-400 OR 525 ETN60-8-400 OR 525 ETN60-20-400 OR 525

CONTROL VOLTAGE

110 / 220 V

400 / 525 V*

ETN150-110 OR 220 ETN150-400 OR 525

110 / 220 V 400 / 525 V*

ETN360-110 OR 220 ETN360-400 OR 525

110 / 220 V 400 / 525 V*

SETTING RANGE ET-N60 0.25 - 1.0 A 1.0 - 4.0 A 2.0 - 8.0 A 5.0 - 20 A 15 - 60 A

STD PACK

PRICE EA.

1 1 1 1 1

2,313.00 2,313.00 2,313.00 2,313.00 2,313.00

0.25 - 1.0 A 1.0 - 4.0 A 2.0 - 8.0 A 5.0 - 2.0 A ET-N150 40 - 150 40 - 150 ET-N360 110 - 360 110 - 360

1 1 1 1

3,202.00 3,202.00 3,202.00 3,202.00

1 1

4,769.00 5,361.00

1 1

4,955.00 5,518.00

Note: Motor protection relays type ET-N feature selectable protection mode, i.e. overload, phase failure and phase reversal protection with selectable tripping time at 600 % of setting. Remote reset facility can be added at an additional cost. *Contact CBI for availability.

ORDER NUMBER = TYPE NUMBER

ELECTRONIC MOTOR PROTECTION RELAYS TYPE ET-N

ET-N60

TYPE ET-N

SH-V320

SH-V400 SHV-600

210 mm

290 mm

210 mm

285 mm

210 mm

225 mm

a b

SERIES SH-V

SH-V320

Medium Voltage Vacuum Contactors Series SH-V up to 1500 V AC-1 & Ith

TYPE1 PRICE EA.

(A) 200 350 450 750

SH-V160 SH-V320 SH-V400 SH-V600

440 V kW (A) 110 (180) 200 (320) 250 (400) 300 (630)

AC-3 660 V 1000 V 1500 V kW (A) kW (A) kW (A) 160 (180) 315 (320) 400 (400) 600 (600)

225 (160) 450 (320) 550 (400) 750 (600)

315 (160) 700 (320) 800 (400) 1000 (600)

STANDARDS AUX CONTACTS

COIL

NORMALLY OPEN

VOLTAGES STD: 110 / 220 / 400 / 525 STD: 110 / 220 / 400 / 525 STD: 110 / 220 / 400 / 525 STD: 110 / 220 / 400 / 525

NORMALLY CLOSED

2 2 2 2

27,881.00 27,881.00 30,514.00 55,281.00

Note: 1Specify coil voltages.

SPARES AND ACCESSORIES Medium Voltage Vacuum Contactors Series SH-V up to 1500 V

UAAXVV4 (2A2B) (FITS MNTG PLATE)

UAAXVV2 (2A2B) PRICE EACH 1,017.00 1,017.00 1,017.00 -

1,656.00 REPLACEMENT COILS

VACUUM TUBE ASSEMBLY (SET OF 3)

17,129.00 -

SHV600TUBE

16,809.00 -

SHV400TUBE

SHV320TUBE

TYPE* SH-V160 SH-V320 SH-V400 SH-V600

SHV160TUBE

PRICE EACH 17,129.00 18,029.00

1,919.00 1,919.00 1,919.00 -

SHV600- _ _ _ C

622.00 622.00 622.00 -

ADD ON AUX CONTACT

SHV160- _ _ _ C SHV320- _ _ _ C SHV400- _ _ _ C

TYPE SH-V160 SH-V320 SH-V400 SH-V600

UAAXVV1 (1A1B) (FITS MNTG PLATE)

ORDER No.

REPLACEMENT AUX CONTACT

ORDER No.

MEDIUM VOLTAGE VACUUM CONTACTORS

SH-V160

2,522.00

1SHV coils interchangeable with SN180 coils. 2SHV coils interchangeable with SN300 coils

*Contact CBI for availability. A = Normal Open Contact. B = Normal Closed Contact.

Medium Voltage Vacuum Contactors Series VZ-D (Std 2 NO / 2 NC Contactor) Ith

TYPE1 & 2

(A)

(110 V AC/DC) VZ2-PE-E10

VZ4-PE-E10 (110 V AC/DC) (220 V AC/DC) VZ2-PE-E20

VZ4-PE-E20 (220 V AC / DC)

200 200 200 200 200 200 200 200 400 400 200 200 200 200 200 200 200 200 400 400

3 Ph. INDUCTION MOTOR RATING 3.3 kV 3.3 kV 6.6 kV 6.6 kV kW (A) kW (A) 35-75 20 75-160 20 90-200 50 185-400 50 220-400 100 450-800 100 450-630 150 900-1250 150 710-750 200 1500 200 900-1250 300 2500 300 1500 400 3000 400 35-75 20 75-160 20 90-200 50 185-400 50 220-400 100 450-800 100 450-630 150 900-1250 150 710-750 200 1500 200 900-1250 300 2500 300 1500 400 3000 400

3.3 kV kVA 5 / 10 20 / 30 50 / 75 100 / 150 200 / 300 500 / 750 1000 1500 2000 5 / 10 20 / 30 50 / 75 100 / 150 200 / 300 500 / 750 1000 1500 2000

TRANSFORMER RATING 3.3 kV 6.6 kV 6.6 kV (A) kVA (A) 0.87 / 1.75 5 / 10 0.44 / 0.87 3.5 / 5.25 20 / 30 1.75 / 2.62 8.75 / 13.1 50 / 75 4.37 / 6.56 17.5 / 26.2 100 / 150 8.75 / 13.1 35.0 / 52.5 200 / 300 17.5 / 26.2 87.5 / 13.1 500 / 750 43.7 / 65.6 175 1000 / 1500 87.5 / 131 2000 175 262 3000 262 350 4000 350 0.87 / 1.75 5 / 10 0.44 / 0.87 3.5 / 5.25 20 / 30 1.75 / 2.62 8.75 / 13.1 50 / 75 4.37 / 6.56 17.5 / 26.2 100 / 150 8.75 / 13.1 35.0 / 52.5 200 / 300 17.5 / 26.2 87.5 / 131 500 / 750 43.7 / 65.6 175 1000 / 1500 87.5 / 131 2000 175 262 3000 262 350 4000 350

PRICE EA. 36,331.00

49,581.00 38,124.00

51,915.00

ADDITION OF AUXILIARY CONTACTS Description of Additional Contractors that may be fitted to the Standard Products TYPE VZMOD1 VZMOD2 (110 VAC) VZMOD3 (220 VAC)

DESCRIPTION Additional 2NO and 2NC Contacts with External Pre-Wired Terminal Strip Additional 4NO and 4NC Contacts with External Pre-Wired Terminal Strip Additional 2NO and 2NC Contacts with External Pre-Wired Terminal Strip

Note: *Withdrawable type available contact CBI. 1Available coil voltages are: 110 V AC / DC (1100) replaced (5100). 220 V AC / DC (2100) replaced (6100). 2Standard aux contacts fitted are 2 N/O + 2 N/C. Aux contact ratings are 1 A @ 220 V AC and 110 V DC. Extra aux contacts can be fitted. *Contact CBI for availability. All Accessories are Factory Fitted only.

ORDER NUMBER = TYPE NUMBER

PRICE EA. 3,650.00 5,750.00 5,750.00

MEDIUM VOLTAGE VACUUM CONTACTORS

SERIES VZ-D

TERMINAL BLOCKS

SERIES TEK Terminal Blocks TYPE TEK 1.25-12* TEK 1.25-3 TEK 2-3 TEK 2-6 TEK 2-9* TEK 2-12 TEK 2-20* TEK 5.5-3 TEK 5.5-12* TEK 14-3 TEK 14-4 TEK 22-3 TEK 22-4 TEK 60-3 TEK 60-4 TEK 100-3 TEK 100-4 TEK 200-3 TEK 400-3*

CURRENT RATING (A) 10 10 15 15 15 15 15 30 30 60 60 80 80 150 150 225 225 400 800

NO. OF WAYS 12 3 3 6 9 12 20 3 12 3 4 3 4 3 4 3 4 3 3

RATED VOLTAGE 250 250 660 660 660 660 660 660 660 660 660 660 660 660 660 660 660 660 660

WIRE SIZE mm2 MAX 1.25 1.25 2.5 2.5 2.5 2.5 2.5 6.0 6.0 16.0 16.0 25.0 25.0 70.0 70.0 120.0 120.0 180.0 120x2

*Contact CBI for availability

ORDER NUMBER = TYPE NUMBER

Available and reliable. 61

PRICE EA. 83.00 39.00 50.00 52.00 101.00 102.00 154.00 52.00 127.00 64.00 97.00 121.00 154.00 174.00 242.00 293.00 394.00 788.00 3,865.00

1. Calibration With CBI Hydraulic-Magnetic Miniature Circuit Breakers, there is no effect on the fixed trip point at ambient temperature ranges from -5 °C to +60 °C. 2. Products Products comply to local and international standards (SANS,VC, IEC, etc). 3. DC Voltage Rating Please refer to CBI catalogues / leaflets for DC ratings. 4. For reverse connection Contact CBI for details. 5. Module Width CBI’s MCB module widths are: 13 mm and 26 mm in mini-rail mounting (Escutcheon height 57 mm). 13 mm, 18 mm and 27 mm in din-rail mounting (Escutcheon height 45 mm), Suffix “D”. 6. Special Breakers For all breakers manufactured to non-standard requirements, prices will be by quotation only. 7. Standard Current Ratings Ampere ratings as indicated are standard. Non-standard ratings can be provided - Prices on request (POR). 8. Switch Disconnectors All switch disconnectors must be backed up by a suitable short circuit protection device (SCPD), having the same or lower current rating and the same interrupting capacity as the switch disconnector, unless otherwise stated. Contact CBI for availability of 4-Pole switch disconnector units. 9. Motor Starting Please refer to pages 82, 83, 84 or CBI catalogues / leaflets. 10.Time Delay curves

Curve No.

Time Delay

Instantaneous (Short circuit)

Non Tripping Current

Tripping Current

Long

High 10 - 20 x In

1.05 x In

1.30 x In

Medium

Medium 5 - 10 x In

1.05 x In

1.30 x In

Short

Low 3 - 5 x In

1.05 x In

1.30 x In

2,3 (LL)

Medium

115 % Trip Point (Load Limiting)

1.05 x In

1.15 x In

9 B

Long Short

Medium 7 - 12 x In

1.05 x In

1.30 x In

Low 3 - 5 x In

1.13 x In

1.45 x In

Medium

Medium 5 - 10 x In

1.13 x In

1.45 x In

Long

High 10 - 20 x In

1.13 x In

1.45 x In

OP (AC+DC)

Very Short

Low 3 - 5 x In

1.05 x In

1.30 x In

U2 (DC)

Medium

Medium 6 - 11 x In

1.05 x In

1.30 x In

Medium

Medium 6 - 12 x In

1.00 x In

1.25 x In

*Other curves available on request.

TECHNICAL SECTION: MINIATURE CIRCUIT BREAKERS

MCBs AND ACCESSORIES DATA

TECHNICAL SECTION: MINIATURE CIRCUIT BREAKERS

MCB DIMENSIONS PRODUCT

HEIGHT (A)

WIDTH (B)

DEPTH (C)

ESCUTCHEON (D)

QA-1(13)

QA-2(13)

QA-3(13)

QF-1(13)

QF-2(13)

QF-3(13)

QF-4(13)

QF-1(18)-D

QF-2(18)-D

QF-3(18)-D

QF-4(18)-D

QF-1(26)

QF-2(26)

QF-3(26)

104

97.5

QF-4(26) QF-1(27)-D QF-2(27)-D

97.5

QF-3(27)-D QF-4(27)-D

97.5

108

QH-1(27)-D

97.5

QH-2(27)-D

97.5

QH-3(27)-D

97.5

QH-4(27)-D

97.5

108

QF14 A/C-D

QA17 A/C

64.8

QF17 A/C

64.8

SM15A

122

SM36A

122

117

NOTE: All measurements are done in mm.

1. 1000 V Rating For 1000 V rating, please consult CBI. (Switch disconnectors not available) 2. Adjustable Current Ratings From the FD range upwards, some breakers are fitted with adjustable magnetic trips. The suffix “V/E” types also have adjustable overload trips. Suffix “E” (electronic) types down to 50 % of nominal rating and suffix “V” (mechanical) types down to 75 % of nominal rating. 3. Calibration CBI thermal breakers are calibrated at 40 °C, unless otherwise stated. Derating for higher temperature environment to be done in accordance with derating curves. 4. Reverse Connection Contact CBI for details. Units indicated line / load should not be reverse connected. 5. Special Breakers Prices for all breakers made by CBI to meet non-standard rating requirements of customer will be by quotation only. 6. Standard Current Ratings Ampere ratings indicated are standard. Non-standard can be provided, on application at a surcharge of up to 20 % of the next standard rating price, depending on quantity, product type and acceptance by CBI. 7. Switch Disconnector Fault Ratings The fault current ratings of CBI switch disconnectors which are fitted with shunt trips and external tripping devices are the same as those of the corresponding circuit breakers. Addition of interface barriers is mandatory. 8. Terminations Consult CBI Catalogues for details. 9. Transient Inrush and Close Co-ordination Protection Higher transient motor starting current associated with some high efficiency motors have created nuisance tripping problems. Consult CBI when in doubt. 10. DC Interrupting Capacity All CBI MCCBs have a DC Voltage Rating of 125 V per pole at 10 kA. 11. Motor Starting In addition to cable protection functions, the CBI circuit breakers are designed for induction motor starting and protection duties. These breakers are particularly suited to direct-on-line starting applications for standard type motors in conjunction with a contactor overload combination or as a stand-alone unit. (Refer to pages 69, 70, 71.) For direct-on-line starting applications using Mitsubishi Circuit Breakers, please refer to page 70. For complete details, refer to the “Motor Starting and Protection Application Guide” and “Circuit Breaker Selection Guide for DOL Motor Starting”, copies available upon request.

WARRANTY CLAIMS Products may only be returned to CBI for warranty claims if all conditions under Section 7, Limitation of Liability, of CBI’s General Terms and Conditions of Sale have been met (Copy available upon request)

TECHNICAL SECTION: MOULDED CASE CIRCUIT BREAKERS

MCCBs AND ACCESSORIES DATA

TECHNICAL SECTION: MOULDED CASE CIRCUIT BREAKERS

TERMINATIONS LUG TERMINAL

KD G4B

G4B

J25S/FD

LB Note: For relevant current carrying capacities, please refer to relevant products. MCCB TERMINAL BOLT SIZES: • J25S M8 • L20 / L40B M12 • G15 / 25D M8 • G35D M8 • F15 / 25D M8 • F35D M8 • K25 / 35D M12 • L35 / 50D M12 • MB M12 • N85D M12

CASCADING TABLES Note: Any current limiting by the cables should be taken into account. Application of the Cascading Table No 1 and 2 on Page 67 and 68. The Cascading Table is applied in practice as follows: 1. Determine the maximum prospective short circuit fault current level at the point of installation of the upstream breaker in the cascade. 2. Moving from the left side towards the right side of the cascading table, in the top row, select an upstream breaker whose breaking capacity rating is equal to or greater than that determined by (1.) above. 3. Determine the prospective short circuit current at the installation point of the downstream breaker, taking into account only the current limiting effect of any cable that is connected between the upstream and downstream breakers. Any current limiting by the upstream breaker should be ignored for this purpose. 4.

From the first column on the left of the cascading table, select the row that represents a short circuit current that is equal to or higher than this latter short circuit current.

5. The downstream breaker suitable for the cascading application will then be found at the intersection of the row from (2) above, and the column from (4) above.

Due to constant research and development, CBI reserves the right to make changes, modifications and extensions to these cascading tables without prior notice.

Also available: 2 CBI’s software “CBI ” which is specially prepared to assist designers in the selection of circuit breakers and cables for a low voltage distribution system. This program is available through CBI.

TECHNICAL SECTION: CASCADING

THIS IS A SERIES CONNECTED (CASCADING) SYSTEM REPLACEMENT OF THE CIRCUIT BREAKERS OTHER THAN THOSE OF IDENTICAL TYPES SHOULD BE REFERRED TO THE CIRCUIT BREAKER MANUFACTURER

QF*

QF1

250

QF*

QF1

QF1 QF*

QF*

QH QF1*

250

QF1

QF*

QF1

QF*

QF/QH

QF*

QF1

QF*

QF1

QF*

QH QF1*

250

TYPE

3 100

F15D CAN CASCADE WITH ANY FD UPSTREAM BREAKER UP TO THE MAXIMUM FAULT LEVEL kA OF THE UPSTREAM BREAKER

QF1

QF QF*

QF1 QF*

QF1

QF*

QF1

QH QF1*

125

QF*

250

QF*

G35D / F35D

QF*

QF1

125

G25D / F25D

UPSTREAM CIRCUIT BREAKERS F65DV

G15D / F15D QH

G15D / F15D

400

K65D

QF1

G15D / F15D

630

L65D

57 45

Mini / DIN DIN

ESCUTCHEON, mm

QF1

G15D / F15D G15D / F15D QH QH

G15D / F15D

400

K35D

MOUNTING TYPE

QF1

G15D / F15D

400

K25D

BUSBAR RATING kA RMS

TECHNICAL SECTION: CASCADING TABLE No.1 CASCADING TABLE (CBI MCCBs and MCBs)

QF, QF*, QH = Single, double or triple pole circuit breakers

QF1, QF1* = Single pole circuit breakers

QF* = QF-(18), QF-(26) ONLY

QF = QF-(13), QF-(18), QF-(26)

NOTES:

LEVEL kA (RMS)

125

FAULT LEVEL kA

AMP RATING

G15D / F15D

No. OF POLES

TYPE

PROSPECTIVE DOWNSTREAM FAULT

68 QF

MCCBs NF125 = 63-100, 80-125 A (thermal adjustable) NF160 = 125-160 A (thermal adjustable) NF250 = 125-160, 160-250 A (thermal adjustable)

MCBs QF = QF3-(18), QF1-(18),QF-(26)

160

125

AMP RATING

250

125

250

125

160

250

TYPE

ESCUTCHEON, mm

57 45 DIN

Mini / DIN

MOUNTING TYPE

160

125

250

TECHNICAL SECTION: CASCADING TABLE No.2

160

3 20

No. OF POLES

FAULT LEVEL kA

NF250SGW

NF160SGW

NF125SGW

TYPE

NF160SGW

UPSTREAM CIRCUIT BREAKERS

MITSUBISHI CASCADING TABLE (Mitsubishi MCCBs and CBI MCBs)

NF125SGW

NOTES:

PROSPECTIVE DOWNSTREAM FAULT LEVEL kA (RMS)

Notes:

5 kA QF1 5 A* QF1 5 A* QF1 5 A* QF1 5 A* QF1 10 A* QF1 10 A* QF1 15 A* QF1 15 A* QF1 20 A* QF1 20 A* QF1 25 A* QF1 30 A* QF1 30 A* QF1 35 A* QF1 40 A* QF1 45 A* QF1 50 A* QF1 60 A* QF1 70 A* QF1 80 A* QF1 100 A*

10 kA QH1 5 A* QH1 5 A* QH1 5 A* QH1 5 A* QH1 10 A* QH1 10 A* QH1 15 A* QH1 15 A* QH1 20 A* QH1 20 A* QH1 25 A* QH1 30 A* QH1 30 A* QH1 35 A* QH1 40 A* QH1 45 A* QH1 50 A* QH1 60 A* QH1 70 A* QH1 80 A* QH1 100 A*

QF3 1 A* QF3 2 A* QF3 2 A* QF3 5 A* QF3 5 A* QF3 5 A* QF3 5 A* QF3 10 A* QF3 10 A* QF3 10 A* QF3 15 A* QF3 15 A* QF3 20 A* QF3 20 A* QF3 20 A* QF3 20 A* QF3 20 A* QF3 25 A* QF3 30 A* QF3 35 A* QF3 45 A* QF3 60 A* QF3 70 A* QF3 80 A* QF3 100 A*

5 kA

QH3 1 A* QH3 2 A* QH3 2 A* QH3 5 A* QH3 5 A* QH3 5 A* QH3 5 A* QH3 10 A* QH3 10 A* QH3 10 A* QH3 15 A* QH3 15 A* QH3 20 A* QH3 20 A* QH3 20 A* QH3 20 A* QH3 20 A* QH3 25 A* QH3 30 A* QH3 35 A* QH3 45 A* QH3 60 A* QH3 70 A* QH3 80 A* QH3 100 A*

10 kA

G15D 16 A** G15D 16 A** G15D 16 A** G15D 16 A** G15D 16 A** G15D 16 A** G15D 16 A** G15D 16 A** G15D 16 A** G15D 16 A** G15D 20 A G15D 20 A G15D 20 A G15D 20 A G15D 32 A G15D 32 A G15D(40 A G15D 40 A G15D 50 A G15D 63 A G15D 80 A G15D 100 A G15D 100 A G15D 125 A G15D 125 A F15D 175 A F15D 225 A F15D 250 A / F25D 250 A K25D 350 A K25D 400 A K35D 500 A K35D 600 A L35DE 800 (700 A)1 N85DE 1000 (900 A)1 N85DE 1000 (1000 A)1 N85DE 1250 (1200 A)1 N85DE 1250 (1250 A)1 N85DE 1600 (1400 A)1 N85DE 1600 (1600 A)1 AE2000SW/SWA (1750 A)1 AE2000SW/SWA (1900 A)1

15 kA

35 kA

65 kA

G25D 16 A** G25D 16 A** G25D 16 A** G25D 16 A** G25D 16 A** G25D 16 A** G25D 16 A** G25D 16 A** G25D 16 A** G25D 16 A** G25D 20 A G25D 20 A G25D 20 A G25D 20 A G25D 32 A G25D 32 A G25D 40 A G25D 40 A G25D 50 A G25D 63 A G25D 80 A G25D 100 A G25D 100 A G25D 125 A G25D 125 A F25D 175 A F25D 225 A F25D 250 A / F25D 250 A K25D 350 A K25D 400 A K35D 500 A K35D 600 A L35DE 800 (700 A)1 N85DE 1000 (900 A)1 N85DE 1000 (1000 A)1 N85DE 1250 (1200 A)1 N85DE 1250 (1250 A)1 N85DE 1600 (1400 A)1 N85DE 1600 (1600 A)1 AE2000SW/SWA (1750 A)1 AE2000SW/SWA (1900 A)1

G35D 16 A** G35D 16 A** G35D 16 A** G35D 16 A** G35D 16 A** G35D 16 A** G35D 16 A** G35D 16 A** G35D 16 A** G35D 16 A** G35D 20 A G35D 20 A G35D 20 A G35D 20 A G35D 20 A G35D 20 A G35D 40 A G35D 40 A G35D 50 A G35D 63 A G35D 80 A G35D 100 A G35D 100 A G35D 125 A G35D 125 A F35D 175 A F25D 225 A F35D 250 A / F35D250 A K35D 350 A K35D 400 A K35D 500 A K35D 600 A L35DE 800 (700 A)1 N85DE 1000 (900 A)1 N85DE 1000 (1000 A)1 N85DE 1250 (1200 A)1 N85DE 1250 (1250 A)1 N85DE 1600 (1400 A)1 N85DE 1600 (1600 A)1 AE2000SW/SWA (1750 A)1 AE2000SW/SWA (1900 A)1

F65DV 16-25 (16 A)**1 F65DV 16-25 (16 A)**1 F65DV 16-25 (16 A)**1 F65DV 16-25 (16 A)**1 F65DV 16-25 (16 A)**1 F65DV 16-25 (16 A)**1 F65DV 16-25 (16 A)**1 F65DV 16-25 (16 A)**1 F65DV 16-25 (16 A)**1 F65DV 16-25 (16 A)**1 F65DV 16-25 (20 A)1 F65DV 16-25 (20 A)1 F65DV 16-25 (20 A)1 F65DV 16-25 (20 A)1 F65DV 25-40 (32 A)1 F65DV 25-40 (32 A)1 F65DV 25-40 (40 A)1 F65DV 25-40 (40 A)1 F65DV 40-63 (50 A)1 F65DV 40-63 (63 A)1 F65DV 80-125/63-100 (80 A)1 F65DV 80-125/63-100 (100 A)1 F65DV 80-125/63-100 (100 A)1 F65DV 80-125 (125 A)1 F65DV 80-125 (125 A)1 F65DV 160-250 (175 A)1 F65DV 160-250 (225 A)1 F65DV 250 A / K65DE 250 A)1 K65D 200-400 (350 A)1 K65D 200-400 (400 A)1 K70D 300-630 (500 A)1 K70D300-630 (600 A)1 L70DE 800 (700 A)1 N85DE 1000 (900 A)1 N85DE 1000 (1000 A)1 N85DE 1250 (1200 A)1 N85DE 1250 (1250 A)1 N85DE 1600 (1400 A)1 N85DE 1600 (1600 A)1 AE2000SW/SWA (1750 A)1 AE2000SW/SWA (1900 A)1

Note: * = External Overload Protection Required. Curve 1 Circuit Breakers Only. ** = Locked Rotor Protection Only.

25 kA

THREE PHASE VOLTAGE 400 V AC

1) All information in this table is for reference and selection purposes only, and only for direct line (DOL) starting. 2) Breaker selection is based on 4-pole three phase squirrel cage motors and certain deviations may be encountered for different motor manufacturers. 3) Circuit breaker settings are based on rated motor current multiplied by 1,6 to prevent starting current from exceeding the instantaneous pick-up current of the circuit breaker. 4) For complete details refer to the “Circuit Breaker Selection Guide for DOL Motor Starting”. 1 These are adjustable breakers and the current in ( ) is the ampere value that these breakers must be set at.

MOTOR SIZE (kW) 0.12 0.18 0.25 0.37 0.55 0.75 1.1 1.5 1.8 2.2 3 3.7 4 4.5 5.2 5.5 6 7 7.5 9.3 11 15 18.5 22 26 30 37 45 55 75 90 110 132 160 200 250 315 355 400 450 500 560 630 710

SINGLE PHASE VOLTAGE 230 V AC

TECHNICAL SECTION: MOTOR STARTING GUIDE: 230 - 400 V

NOTES:

1) All information contained in this table is for reference and selection purposes only and only for direct on line motor starting (DOL). 2) Breaker selection is based on 4-pole three phase squirrel cage motors and certain deviations may be encountered for different motor manufacturers. 3) kA ratings of breakers must be selected in accordance with fault levels of applicable systems. 4) Circuit breaker settings are based on rated motor current multiplied by 1,6 to prevent starting current from exceeding the instantaneous pick-up current of the circuit breaker. 5) For complete details, refer to the "Circuit Breaker Selection Guide For DOL Motor Starting".

NF800-CEW/SEW (800 A)*, NV800-SEW (800 A)* NF1000-SEW (900 A)*, AE1000-SW (900 A)* NF1000-SEW (1000 A)*, AE1000-SW (1000 A)* NF1250-SEW (1200 A)*, AE1250-SW (1100 A)* NF1250-SEW (1200 A)*, AE1250-SW 1200 A)* NF1600-SEW (1400 A)*, AE1600-SW (1300 A)* NF1600-SEW (1500 A)*, AE1600-SW (1500 A)*

NF1250-SEW (1200 A)*, AE1250-SW (1200 A)* NF1250-SEW (1250 A)*, AE1250-SW (1250 A)* NF1600-SEW (1400 A)*, AE1600-SW (1400 A)* NF1600-SEW (1600 A)*, AE1600-SW (1600 A)* AE2000-SW/SWA (1750 A)* AE2000-SW/SWA (1900 A)*

355

400

450

500

560

630

710

TECHNICAL SECTION: MOTOR STARTING GUIDE: 400 - 525 V

NF800-CEW/SEW (700 A)*, NV800-SEW (700 A)*

NF1000-SEW (900 A)*, AE1000-SW (900 A)* NF1000-SEW (1000 A)*, AE1000-SW (1000 A)*

NF630-CW/SW 600 A, NV630-SW 600 A

250

315

NF630-CW/SW 500 A, NV630-SW 500 A

NF630 CW/SW 600 A, NV630 SW 600 A NF800 CEW/SEW (700 A)*, NV800- SEW (700 A)*

NF400-CW/SW 350 A, NV400-SW 350 A

160

200

NF400-CW/SW 300 A, NV400-SW 300 A

NF400 CW/SW 400 A, NV400 SW 400 A NF630 CW/SW 500 A, NV630 SW 500 A

NF400 CW/SW 350 A, NV400 SW 350 A

110

132

NF250-CWA/SWA/HWA 200 A, NV250-SWA/HWA 200 A NF250-CWA/SWA/HWA 250 A, NF400-CW/SW 250 A, NV400-SW 250 A

NF250-CWA/SWA/HWA 250 A, NF400CW/SW 250 A, NV400 SW 250 A

NF250-CWA/SWA/HWA 175 A, NV250-SWA/HWA 175 A

NF125-CWA/SWA/HWA 80 A, NV125-SWA/HWA 80 A

18.5

NF250-CWA/SWA/HWA 225 A, NV250-SWA/HWA 225 A

NF63-HWA 50 A, NF125-SWA/HWA 50 A, NV125-SWA/HWA 50 A

NF63-HWA 63 A, NF125-CWA/SWA/HWA 63 A, NV125-SWA/HWA 63 A

NF63-HWA 50 A, NF125-SWA/HWA 50 A, NV125-SWA/HWA 50 A

NF160/250-CWA/SWA/HWA 125 A, NV250-SWA/HWA 125 A

NF63-HWA 40 A, NF125-SWA/HWA 40 A, NV125-SWA/HWA 40 A

7.5

NF160/250-CWA/SWA/HWA 125 A, NV250-SWA/HWA 125 A

NF63-HWA 32 A, NF125-SWA/HWA 32 A, NV125-SWA/HWA 32 A

5.5

NF160-SWA/HWA 160 A, NF250-CWA/SWA/HWA 175 A, NV250-SWA/HWA 175 A

NF63-HWA 20 A, NF125-SWA/HWA 20 A, NV125-SWA/HWA 20 A

NF63-HWA 10 A, NV63-HWA 16 A, NV125-SWA/HWA 16 A NF63-HWA 16 A, NF125-SWA/HWA 16 A, NV125-SWA/HWA 16 A

NF63-HWA 16 A, NF125-SWA/HWA 16 A, NV125-SWA/HWA 16 A