Flexco by luuk drent

EF100M

Splicing and Conveyor Solutions

Belt Fastener Selection Guide HEAVY DUTY APPLICATIONS HEAVY-DUTY APPLICATIONS FLEXCO® BOLT SOLID PLATE Market Applications

FLEXCO® RIVET SOLID PLATE

Higher-tension, Heavy-duty main-haulage belts conveyor and used in coal, elevator belts hard-rock commonly used for mining, foundries, handling sand, grain elevators, gravel, crushed aggregate plants, and stone, grain, coal, steel mills. cement, and salt.

UNDERGROUND MINING APPLICATIONS

FLEXCO® F-SERIES

FLEXCO® BOLT HINGED

FLEXCO® R2

FLEXCO® RIVET HINGED

Construction and road equipment, coal, salt, and potash mines, stacking and stockpiling belts, and other applications involving smaller pulleys.

Underground mining, moveable construction machinery, wood processing, and other medium-duty applications.

Underground mining, construction equipment with smaller pulleys, asphalt plants, log belts, and similar applications.

Underground mining applications that require mechanical machine-installed splices.

(Not available in Continental Europe)

Recommended Maximum Operation Tension

For belts with mechanical fastener ratings up to 105 kN/m (620 P.I.W.)

For belts with mechanical fastener ratings up to 140 kN/m (800 P.I.W.)

For belts with mechanical fastener ratings up to 70 kN/m (400 P.I.W.)

For belts with mechanical fastener ratings up to 60 kN/m (330 P.I.W.)

For belts with mechanical fastener ratings up to 140 kN/m (800 P.I.W.)

Belt Strength

For belt strengths up to 1000 N/mm

For belt strengths up to 1600 N/mm

For belt strengths up to 500 N/mm

For belt strengths up to 400 N/mm

For belt strengths up to 1250 N/mm

For belt strengths up to 1400 N/mm

5 mm – 30 mm

6 mm – 24 mm

6 mm – 22 mm

3 mm – 10 mm

6 mm – 18 mm

6 mm – 14 mm

(3/16" – 1 3/16")

(7/32" – 15/16")

(1/4" – 7/8")

(1/8" – 3/8")

(7/32" – 23/32")

(7/32" – 9/16")

300 mm and up

450 mm and up

150 mm and up

125 mm and up

225 mm and up

(12" and up)

(18" and up)

(6" and up)

(5" and up)

(9" and up)

Belt Thickness Range Recommended Minimum Pulley Diameter*

*For operating tension of 75-100% of belt rating.

LIGHT-DUTY APPLICATIONS

ALLIGATOR® RIVET

ALLIGATOR® PLASTIC RIVET

SPIRAL LACE

WIRE HOOKS

Manufacturing assembly lines, food, package and parts handling, checkout counters, and agricultural equipment.

Hay baling applications.

Applications requiring nonmetallic fasteners. Airports, food, and pharmaceutical applications.

Applications requiring nonmetallic fasteners such as food processing, baggage handling, and x-ray equipment at airports.

Packaging/parts/ baggage handling, food processing, checkout counters, laundries, filter media, and agricultural applications.

For belts with mechanical fastener ratings up to 35 kN/m (200 P.I.W.)

For belts with mechanical fastener ratings up to 52 kN/m (300 P.I.W.)

For belts with mechanical fastener ratings up to 11 kN/m (65 P.I.W.)

For belts with mechanical fastener ratings up to 8,7 kN/m (50 P.I.W.)

For belts with mechanical fastener ratings up to 35 kN/m (200 P.I.W.)

For belt strengths up to 400 N/mm

For belt strengths up to 250 N/mm

For belt strengths up to 500 N/mm

For belt strengths up to 100 N/mm

For belt strengths up to 400 N/mm

1,5 mm – 6,4 mm

1,6 mm – 13 mm

3,2 mm – 5,6 mm

2,4 mm – 3,2 mm

1,0 mm – 5,0 mm

1 mm – 10 mm

(1/16" – 1/4")

(1/16" – 1/2")

(1/8" – 7/32")

(3/32" – 1/8")

(1/32" – 1/4")

(3/64" – 25/64")

50 mm and up

25 mm and up

88 mm and up

38 mm and up

10 mm and up

24 mm and up

(2" and up)

(1" and up)

(3 1/2" and up)

(1 1/2" and up)

(1/2" and up)

(15/16" and up)

ALLIGATOR® STAPLE

ALLIGATOR® LACING

Light- and medium-duty conveyor belts in package and baggage handling, cased goods, parts, food and agricultural products.

Alligator Fastener Systems for Light-DutyApplications 速

EF115M

More Light-Duty Solutions from Flexco The Wire Hook System Double staggered grip pattern gives wire hooks substantial holding power without degrading the belt carcass integrity. Choose from a wide selection of wire diameters, leg and point lengths, strip lengths, and styles. For a complete Wire Hook catalog, contact your local distributor, Flexco Customer Service, or log on to www.flexco.com.

Unibar® Fasteners Wire hooks are welded to a common bar and feature our patented Safety Strip which covers hook point to protect user’s fingers. Holds hook legs parallel to ease the “meshing” of belt ends and simplify hinge pin insertion.

Carded Hooks Individual hooks secured on carding paper for easier handling. Works with any application, including bias splices and troughed belt applications.

ClipMark™ Series Fasteners Designed for mono/multifilament conveyor belting and filter media up to 4 mm (5/32") thick, and for pulleys as small as 24 mm (15/16"). High width-to-height ratio gives ClipMark™ superior mass and strength for increased reliability.

Other Flexco Conveyor Solutions Flexco® Heavy-Duty Fastener Systems: Hinged and solid plate fasteners for applications up to 263 kN/m (1500 P.I.W.).

Tatch-A-Cleat® Belt Cleats: Easy to install. Choice of specialized compounds make them ideal for wide variety of applications.

Belt Cleaning Products: Complete selection of cleaning solutions includes pre-cleaners, secondary cleaners, and belt plows.

Flex-Lag® Pulley Lagging: Minimize belt slippage with applicationmatched styles, including conventional rubber and long-wearing ceramic lagging. 19

CH225

Clipper® Vise Lacer

Vise Lacers are available for all series of Clipper hook sizes in widths up to 10" (250 mm). Wider belts can be laced in multiple operations with the easy-to-use continuous lacing feature.

Market applications • Agriculture • Food processing • Bowling alleys • Laundry & textiles • General manufacturing

Vise Lacer For Hook Size:

Tool Width in. mm

2-7, U2SP-U7

100

2-7, U2SP-U7

175

R-7

2-7, U2SP-U7 1, UX-1

10 7

250 175

R-10 1VL-7

25*

175

25VL-6

30, 36, UCM36

175

36VL-7

*25 Lacers have a slightly different construction.

Ordering Number R-4

Flexible Steel Lacing Company 2525 Wisconsin Avenue Downers Grove, IL 60515-4200 U.S.A. Telephone: (630) 971-0150 Fax: (630) 971-1180 E-mail: advertising@flexco.com Visit our Web site at: www.flexco.com

Australia: 61-2-9680-3322 • England: 44-1457-891000 • Germany: 49-7428-9406-0 • Mexico: 52-5-674-5326 New Zealand: 64-9-415-4488 • Republic of South Africa: 27-11-974-2771

Simply place the lacer in a vise, load the hooks, insert the belt, and close the vise. The exclusive built-in pressure plate ensures a consistent clinch for long-lasting splices. And the Acusteel™ Hook Retainer produces an optimal loop profile for maximum splice performance.

Clipper

The Clipper® Vise Lacer is the ideal lacing tool for the user with only a few conveyor belts, while providing the reliability and performance of a machine splice. It is also easy to use and inexpensive.

CH210

Clipper® Roller Lacer®

• Parcel services • General material handling • Corrugated box board • Food processing • Distribution centers • Ag/Combine pick-up belts

A durable, lightweight body made from sturdy aircraft aluminum and a carrying handle make it easy to take the Roller Lacer on-site to lace belts right on the conveyor. Plus, there is room for extra lacer pins and face strips in a handy storage compartment. For more frequent lacing applications, and/or when installing hooks into hard belts, specify the Roller Lacer with the optional steel lacing head.

Market applications

Clipper

The portable, easy-to-use Clipper® Roller Lacer® makes it easy to lace belts up to 60" (1500 mm) wide in a single operation. Belts wider than the lacer’s width can be laced in multiple passes with the continuous lacing feature. A handle-actuated belt clamp holds belts securely while twin rollers embed fasteners evenly to create a strong, longlasting splice.

AL200

Alligator Conveyor Belt Lacing Fastener System ®

Designed for belts from 1/32" (.8 mm) to 1/2" (12.5 mm), Alligator Belt Lacing installation requires no special tools, only a hammer. The lacing is secured with teeth that embed lengthwise on the belt, providing a strong, vise-like hold. Clips hold gauge rod and lacing firmly and squarely against the belt and ensures a strong, straight splice. The straight splice also helps ease hinge pin insertion.

Market applications • Package/Parts Conveying • Food/Sanitary Contact • Agricultural Harvesting/Handling • Recycling/Scrap Handling • Wood Products

Alligator® Conveyor Belt Lacing Selection Chart

Lacing Size

For Belts With Mechanical Fastener Ratings Up To:

Belt Thickness Range in.

Recommended Minimum Pulley Diameter

Approx. Corrugated Hinge Pin Diameter

Strip Length

P.I.W.

kN/m

in.

4.3

Up thru 1/16

Up thru 1.6

3/64

1.2

152

7.8

1/16-3/32

1.6-2.4

1-1/2

1/16

1.6

152

8.7

3/32-9/64

2.4-3.6

1/16

1.6

152

11.4

1/8-5/32

3.2-4.0

2-1/2

3/32

2.4

305

16.6

5/32-3/16

4.0-4.8

7/64

2.8

305

100

17.5

3/16-7/32

4.8-5.6

102

1/8

3.2

305

100

17.5

7/32-9/32

5.6-7.1

127

1/8

3.2

305

150

9/32-5/16

7.1-7.9

178

9/64

3.6

305

165

5/16-3/8

7.9-9.5

229

3/16

4.8

305

175

3/8-7/16

9.5-11.1

305

13/64

5.2

305

200

7/16-1/2

11.1-12.7

356

13/64

5.2

305

in.

Alligator®

For easy, economical installation and an exceptionally smooth joint, choose the Alligator® Conveyor Belt Lacing System. Alligator Lacing is available in continuous lengths to fit any belt width and the onepiece design provides uniform tension across the full belt width. The one-piece fastener strip also ensures that there are no loose pieces to work themselves out of the belt and into the conveyed product.

BH200

Flexco® Bolt Hinged Fastener System

Versatile, easy-to-install design

No. 375X

No. 550

On-site installation requires hand or power tools. Our exclusive piloted bolt also simplifies installation and holds fastener plates firmly in place. For added strength and pull-out resistance, specially formed teeth penetrate deep into the belt carcass without damaging carcass fibers.

Market applications Exclusive tapered tip cradles nuts securely in place.

• Construction and Road Equipment • Coal • Salt • Potash • Grain • Wood Products • Recycling

Easy to use. Reduces installation time.

Flexco® Bolt Hinged Fastener Selection Guide

Fastener Size 375X 550

Belt Thickness Range

For Belts with Mechanical Fastener Ratings Up To:

Recommended Minimum Pulley Diameter (Operating Tension 75% -100% of Belt Rating)

in.

P.I.W.

kN/m

in.

1/4 - 13/32

6 - 11

190

mm 150

1/4 - 5/8

6 - 16

300

225

For belt conveyor applications subject to frequent length adjustments, the Bolt Hinged fastener is easy to install – and re-install. The joint can be separated simply by removing the hinge pin.

Flexco

Sturdy hinged construction makes Flexco® Bolt Hinged fasteners ideal for applications that use smaller pulleys, but still require a high-strength, dependable splice. A choice of sizes accommodate belts from 1/4" (6 mm) to 5/8" (16 mm) thick.

BSP200

Flexco Bolt Solid Plate Fastener System ®

High strength When belt top covers are 3/16" (5 mm) or more, countersinking (recessing) fastener plates is recommended.

Easy installation

Exclusive tapered tip cradles nuts securely in place. Easy to use.

Field-proven templets, punches, and boring tools make it easy to quickly and accurately prepare belts for fastener installation. Fasteners are easily installed on-site using portable hand tools or power tools. Our exclusive piloted bolts also contribute to faster installation.

Market applications

Reduces installation time.

• Sand • Gravel • Grain • Coal

• Crushed stone • Cement • Salt

Flexco® Bolt Solid Plate Fastener Selection Guide Belt Thickness Range

Fastener Size

in.

For Belts with Mechanical Fastener Ratings Up To:

Recommended Minimum Pulley Diameter (Operating Tension 75% -100% of Belt Rating)

P.I.W.

kN/m

in.

3/16 - 7/16

5 - 11

150

300

140

3/16 - 7/16

5 - 11

225

350

190

5/16 - 9/16

8 - 14

330

450

1-1/2

7/16 - 11/16

11 - 17

300

450

9/16 - 13/16

14 - 21

440

750

2-1/4

9/16 - 1-3/16

14 - 30

620

105

900

2-1/2

3/4 - 1

19 - 25

450

1050

15/16 & over

24 & over

560

100

1200

High strength is the result of superior design and plate compression on both the top and bottom sides of the belt. High tensile strength bolts compress top and bottom plates to distribute splice tension evenly across the entire width of each fastener plate. For added strength and pull-out resistance, specially formed teeth penetrate deep into the belt carcass – without damaging carcass fibers.

Flexco

Flexco® Bolt Solid Plate fasteners are engineered to meet the demands of the toughest material handling applications, providing a strong sift-free splice and superior holding ability. A choice of sizes accommodates belts from 3/16" (5 mm) to over 15/16" (24 mm) thick.

Flexco® Bolt Solid Plate Installation Tools and Supplies

The only tools needed for Bolt Solid Plate fastener installation are a templet and portable hand tools or power tools such as wrenches and belt punches. Impact wrench driven power tools are recommended, and can reduce installation time by at least 50%. Power Installation Tools

Hand Installation Tools For Fastener Number

Description Bolt Horn Punch

Boring Bit

Wrench

Ordering Number

Description Power Punch

For Fastener Number 1, 140, 190 & RP1 1-1/2, 2, 2-1/4 & RP2

Ordering Number HP1 HP2

1, 140, 190 & RP1

2BH P1P

1-1/2, 2, 2-1/4 & RP2

P2P

2-1/2 & 3

P3P

1, 140, 190 & RP1

B1B

1-1/2, 2, 2-1/4 & RP2

HB2

1-1/2, 2, 2-1/4 & RP2

B2B

2-1/2 & 3

HB3

1, 140, 190 & RP1

HW1

Power Boring Bit

Power Wrench

2-1/2 & 3

HP3

1, 140, 190 & RP1

HB1

2-1/2 & 3

B3B

1, 140, 190 & RP1

S1S

1-1/2, 2, 2-1/4 & RP2

HW2

1-1/2, 2, 2-1/4 & RP2

S2S

2-1/2 & 3

HW3

2-1/2 & 3

S3S

Quick Change Chuck

5552

Power Tools

Bolt Breaker For Fastener Number

Description Bolt Breaker (Two Per Package)

Hand Tools

Ordering Number

1, 140, 190 & RP1 1-1/2, 2, 2-1/4 & RP2

110 112

2-1/2 & 3

113

Bolt Breaker

Flexco-Lok® Tape

Flexco® Cracking Chisel

Rigid nylon tape helps eliminate belt ripples on plied or solid-woven belting, so belts run smoothly over pulleys and under cleaners. Also helps seal splices against seepage of fines and moisture.

With a hammer and cracking chisel, individual worn plates can be easily replaced – without resorting to replacement of the entire splice.

Flexco-Lok® Belt Tape (100' per Carton) Fastener Size 1 & 140 190, 1-1/2 2 & 2-1/4

Ordering Number FL7C FL11C

Cracking Chisel Nut Size 1, 140 & 190 1-1/2, 2 & 2-1/4

Ordering Number C1C C2C

Flexco® SR™ Rivet Hinged Fastener System

RH240

The Flexco® SR™ Scalloped Edge™ fastener features a low profile that significantly reduces the fastener’s exposure to cleaner blades, skirt rubber, and return idlers. Reduced wear and tear on the fastener extends the life of the splice to maximize belt availability and to help keep productivity on a roll.

Improved performance Designed for rubber plied and PVC solid woven belting, and for worn belts unfit for vulcanized splices, the Flexco SR fastener features a patented Scalloped Edge design. The scalloped design contributes to improved fastener profile resulting in increased compatibility with belt cleaners and improved cleaner-tip wear. The staggered rivet pattern also provides maximum holding ability by allowing the rivets to pass betweeen the carcass fibers without damaging them.

Scalloped Edge™

A built-in viewport simplifies fastener positioning. And self-setting rivets are installed from the top side of the belt for faster installation.

Viewport

Market applications

Lower fastener profile extends belt splice life.

• Coal • Wood Processing • Asphalt Plants • Construction and Road Equipment

Less effort required for installation. Reduced maintenance costs. Viewport assures proper installation alignment.

Flexco® SR™ Scalloped Edge™ Fastener Selection Guide

Fastener Size

Belt Thickness Range in.

R2 R5 R5-1/2 R6 RAR6LP RAR8

1/8- 3/8 7/32- 7/16 5/16- 19/32 13/32- 11/16 5/16- 23/32 13/32- 11/16

mm 3- 10 6- 11 8- 15 10.5- 17 8- 18 10.5- 17

For Belts with Mechanical Fastener Ratings Up To:

Recommended Minimum Pulley Diameter (Operating Tension 75%-100% of Belt Rating)

P.I.W.

kN/m

in.

330 450 650 800 800 1500

60 79 114 140 140 263

5 9 12 18 18 18

125 230 300 450 450 450

BM201

Far-Pul® HD® Belt Clamps

Far-Pul HD

Clamp-bar pins simplify alignment and positioning

Unique design, easily adjustable The unique design of the Far-Pul HD provides even tensioning across the entire belt width for a secure grip. And with a load capacity of up to three tons (2.7 metric tons), when used with two 1-1⁄ 2-ton chain come-alongs, it is ideal for rubber covered and PVC heavy-duty belting from 7/32" (6 mm) to 1" (25 mm) thick. Grooves on clamp bars for non-slip grip

Adjustable steel scissors

The Far-Pul HD also accommodates a variety of belt widths. So the need to inventory different clamp bars for different belt widths is eliminated. Clamp brackets slide easily into place against both belt edges for easy adjustability. And clamp-bar pins simplify alignment and positioning.

Far-Pul® HD® Belt Clamps are the lightweight belt maintenance tool specially engineered for heavy-duty applications.

BM200

FSK™ Belt Skiver

Flexco® FSK™ Belt Skiver Description

Ordering Number

Skiver Complete

FSK-1

Australia: 61-2-9680-3322 • England: 44-1457-891000 • Germany: 49-7428-9406-0 • Mexico: 52-5-674-5326 New Zealand: 64-9-415-4488 • Republic of South Africa: 27-11-974-2771

™

For use on rubber-covered belts with top covers of 3/16" (4.5 mm) or more. Provides skives from 1/16" (1.5 mm) to 3/8" (10 mm) deep in a single pass. Deeper skives can be achieved with multiple passes. Can also be used on most worn or damaged belt surfaces.

FSK

Portable, lightweight, and easy to carry, the FSK™ Belt Skiver adjusts easily to the precise cutting depth you need. The FSK Belt Skiver is compact, so it is easy to use anywhere on the job site – even in cramped operating environments.

More Innovative Solutions from Flexco In addition to mechanical fasteners, Flexco is also the source for a complete family of belt cleaners, belt trainers, lagging, cleats, tools, and other accessories to maximize productivity and performance up and down the conveyor line. Contact your Flexco distributor for additional product information.

Eliminator Belt Cleaners ®

Select from a wide variety of fastener-friendly Eliminator® belt cleaners, including precleaners, secondary cleaners, and reversing cleaners. (Not available in Continental Europe.)

Deflector ™ Plows A selection of Deflector™ belt plows feature an innovative blade design for superior protection of tail pulleys from the damaging effects of rocks, fines, and other clinging debris. (Not available in Continental Europe.)

Flex-Lok ™ Skirt Clamps Flex-Lok™ skirt clamps from Flexco provide a simple, easy-to-install solution to loading-point spillage problems.

Persuader ™ Belt Positioners The Persuader™ belt positioner is an effective and easy-to-install solution for belt mistracking problems.

Maintenance Tools Choose from a wide selection of tools specially engineered to simplify conveyor belt maintenance and installation.

Flex-Lag Pulley Lagging ®

Flex-Lag® easy-to-install, high-performance ceramic and rubber pulley lagging delivers exceptional traction, eliminates belt slippage.

Tatch-A-Cleat Belt Cleats ®

Complete line of mechanically fastened and bondable cleats that help restore full carrying capacity to incline or conveyor belts – without removing your belt from the conveyor.

B E LT C O N V E Y O R P R O D U C T S

Keep your line up and running.

Partners in Productivity

h-type

Precleaner with V- or VP-Tips

High Efficiency Tungsten-Carbide Precleaner The Flexco H-Type® Precleaner with V- or Protected V-Tips is designed to be positioned on the head pulley and to remove the bulk of the carryback from the belt. Proven performance over 20 years as the most efficient precleaner in material handling applications such as coal, iron ore, bauxite and hard rock mining with vulcanized belts.

Durable, tungsten carbide tips

Segmented blades ensure proper wear throughout the life of the blade Impact-resistant steel base

Protected V-Tip Option

Heavy-duty, 2-7/8" (73 mm) pole ensures durability for those tough applications

Segmented cushions allow each blade to self-adjust and maintain blade-to-belt contact

Features and Benefits • Works with vulcanized belts. The tungsten carbide tips allow for maximum cleaning efficiency and superior wear characteristics. Also available with protected tips for abrasive applications. • Complete cleaning system. When teamed with a secondary cleaner, it makes up a system that delivers maximum cleaning power for the most abusive conveyor applications. • Made for mining conveyors. Made from heavy-duty steel with corrosion-resistant powder coating, the H-Type is available in sizes for belt widths from 18" to 72" (450 to 1800mm). Additional sizes are available upon request. • Optimal positioning. Blade contact on the pulley is 15° below the horizontal centerline. This keeps the blades out of the discharge path and protects them from rocks, large lumps and other debris.

www.flexco.com www.flexco.com

Quick Mount Tensioner (QMT) allows the blade tension to be visually inspected

MSP

Standard Mine-Duty Precleaner

Economical and Effective The MSP Standard-Duty Precleaner is not your average solid-blade belt cleaner that mounts on the head pulley. It is a mine-tough design that combines simple, do-it-yourself installation, quick maintenance and effective cleaning results with an affordable price tag.

Faceted profile design results in continuous blade edge “renewal” for improved cleaning efficiency throughout the life of the blade

Heavy-duty 2-7/8” (72 mm) pole ensures durability for those tough applications

Material path options, belt width minus, 2”, 8” or 14”, guarantee proper cleaning and blade life

Molded in wear line on all Flexco ConShear™ blades

High strength aluminum extrusion

Simple blade replacement no tools needed

Features and Benefits • Quick-change blade. No tools are needed. Just pull one pin, remove the old blade, slide in the new one and replace the pin. • Works with Flexco and other mechanical splices. The spring tensioner quickly moves the blade away from the belt when a splice passes. The polyurethane blade easily glides over the splice without damage and with minimal cleaning disruption. • Easy to service. All maintenance work is done from the easy-access side of the beltline. Blade retensioning and change-out are quick and easy. • Fits most conveyor structures. Available for belt widths from 24" to 84" (600 to 2100mm). The MSP poles are extra long (belt width plus 54"/1350 mm) to accommodate varying structure widths.

www.flexco.com www.flexco.com

Quick Mount Tensioner (QMT) allows the blade tension to be visually inspected

EZP-LS Limited Space Stainless Steel Primary Cleaner with White ConShear™ LS Blade

Big Features in a Small Package for Corrosive Environments Many conveyors and portables have tight space configurations. That means a belt cleaner must be small and compact to fit. The new EZP-LS Primary Cleaner delivers a big cleaning job in a compact cleaner, with the added advantage of corrosion resistant stainless steel components.

Faceted profile design results in continuous blade edge “renewal” for improved cleaning efficiency throughout the life of the blade.

High Strength aluminum extrusion.

Molded-in wear line on all Flexco Conshear blades.

Smaller LST Tensioner is self contained and simple to adjust.

Smaller blade and mounting clearance allows installation on conveyors with pulleys as small as 150mm (6”). Simple blade replacement no tools needed.

Features and Benefits • White food-grade ConShear Primary Cleaner is chemical resistant and all ingredients used in urethane formulation comply with the relevant requirements of 21 CFR (FDA Code of Federal Regulations) for use in repeated bulk dry food applications. • Stainless Steel. Corrosive environments wear on any component, but stainless steel can protect against that. • Quick-change blade. No tools are needed. Just pull one pin, remove the old blade, slide in the new one and replace the pin. • Can be used on reversing belts. Installing cleaners on both pulleys gives superior cleaning results on belts that run in both directions. • Can be ordered for special configurations. Special order options include: a stainless steel pole for corrosive applications or a high temp ConShear-LS Blade for applications with temperatures up to 135° C (275° F) with spikes to 163° C (325° F).

www.flexco.com www.flexco.com

Easy-to-read pointer shows when the blade is worn out.

Tatch-A-Cleat Econo-Cleat® Model EC ®

TAC205

The versatile design also permits use as a cleat, plow, or belt scraper in a variety of positions and on any type of belt. These cleats vary in height from 1-1/4" (31 mm) to 6" (150 mm) and in angles from 45º to 90º before installation.

Market applications • Harvesting • Material handling • Bulk materials • Canned goods

Tough and economical solution for bulk-material handling

The Econo-Cleat also provides economical cleating without remnants – short sections may be butted together. Separate cleat supports are not necessary.

Cleat resilience and specially engineered shape carry product gently and prevent possible damage to both the belt and conveyed product.

Cleat bottom is concave to ensure a tight seal against the belt when fastened.

The Econo-Cleat is constructed from a specially compounded, durable EPDM rubber that provides good resistance to abrasion. Plus, it stands up well to all types of weather, including constant exposure to sunlight and ozone. Also available in PVC for less demanding applications.

Tatch-A-Cleat

Designed to prevent material roll-back on incline conveyors, the Tatch-A-Cleat® Econo-Cleat® Model EC is ideal for lightduty to medium-duty applications, including grain handling, harvesting equipment, material handling, and canned goods.