Conventional-Knuth-catalog-2013 by Knuth Werkzeugmaschinen GmbH

MACHINE TOOLS

Turning Milling Drilling

2013

The deﬁnition of a new standard for conventional lathes had to be perfect - therefore, we complemented the Servoturn with the following features:: Mineral-Casting Machine Frame • mineral-casting reduces vibration 6 times faster than castiron (GG25) and up to 10 times faster than steel- this ensures excellent surface quality that could not be achieved with conventional machines • excellent thermal stability • modern manufacturing process with excellent energy footprint

Linear Proﬁle Guide Rails • maximum reliability and performance • excellent rigidity, strength and accuracy is achieved by optimum load distribution, designed for accepting high loads and torques • no stick-slip effect • long life and minimum maintenance • replaceable parts

intuitive operation

Recirculating Ball Screw • considerably less errors due to loseness (backlash), resulting in significantly higher precision • significantly reduced friction • no stick-slip effect • reduced heat development • less wear for even less maintenance requirements

Servo drive technology – including "Teach-in" buttons that allow setting a limit stop at the current position Options • 3-jaw chuck, Ø 8 in, Camlock 1-6, 4000 rpm • 4-jaw chuck, Ø 8 in, Camlock 1-6, 4000 rpm • quick-change tool holder set WB • plus assembly

Part No. 146 372 146 472 103 195 103 315

Part No. • oscillating elements LT 33 (per piece) 103 321 • accessory set, MT 4 (8 pieces) 104 594 For additional options for this machine, visit our website and search for Servoturn 410 (product search)

Standard Equipment: 3-axis position indicator, quick-action tool changer with 1 cartridge, coolant system, splatter guard, support shield, work lamp, operator manual Speciﬁcations Servoturn 410 Working area center width turning diameter - over bed (max) - over support (max) X axis travel Z axis travel bed width Headstock spindle speed spindle speed (forward) spindle speed (reverse) spindle bore spindle mount spindle taper Feed X / Z axis feed

1100

mm mm mm mm mm

410 250 225 960 300

min-1 min-1 min-1 mm

30 - 3000 30 - 3000 30 - 3000 52 D1-6 MK 6

mm/U

Thread Cutting thread cutting, metric thread cutting, Whitworth tailstock tailstock quill diam. tailstock taper tailstock quill stroke Drive Capacities headstock motor rating motor rating X axis motor rating Z axis power supply Dimensions/Weight overall dimensions (LxWxH) weight Part No. with position indicator

0,01 - 2

For the latest specials, visit www.knuth.de

mm GPZ

(24) 0,2 - 14 (24) 4 - 48

mm mm

50 MK 4 120

kW kW kW V

5,5 1 1,5 400

mm kg

2250 x 1260 x 1250 2500 300 825

Tur ni ng

Lathe

Servoturn 410 Conventional Precision Lathe with servo drive easy to operate, more reliable, more precise, for higher loads and reduced maintenance

• mineral-casting • preloaded ball screws • electronic hand-wheels • axes are driven by servomotor • linear guide • V const

Intuitive operation as we know it from conventional machines - only much better: • feed and thread leads can be selected via rotary switch - what a brilliant concept • stops can be set electronically with the press of a button • feeds are infinitely variable between 50 and 100% via override potentiometer - finally available on a conventional lathe • micro-control via electronic hand-wheels - but handling and postioning just as with a conventional machine • axes are powered by high-quality servo drives that translate your hand movements with the precision and dynamics of modern CNC machines • infinitely variable speed adjustment and constant cutting speed of headstock

linear proﬁle rail guides on Z and X

For more information and options, visit www.knuth.de

servo-motor and preloaded ball screw cutter head swivels ± 90° - manual quill feed for angular bores

Proven Milling Machine with innovative operating concept and new feed technology Your Advantages: • Easy to use: intuitive operation - practical layout of control elements and streamlined function • automatic feed on all axes and infinitely variable rapid feed • with speeds up to 3000 mm/min • set limit stops on any axis with the push of a button - 3 stop positions per axis can be stored • More precise: operated via electronic hand-wheels - axes are powered by high-quality servo drives that translate your hand movements with the precision and dynamics of modern CNC machines • More reliable: drives, spindles, and measuring systems are totally enclosed or mounted in protective enclosures and virtually maintenance-free • Electronics - made in Germany • More capacity: this machine only uses premium drive components that are designed for continuous operation • Maintenance-free: no regular maintenance needed for the entire feed drive control panel with integrated X.pos Plus Position Indicator Standard Equipment: 3-axis position indicator, electronic hand-wheels, pneumatic workpiece clamping, chip collector tray, LED work lamp, coolant system, central lubrication (manually operated), horizontal guideway cover, operating tools, operator manual Options • oscillation element LT 55 (per unit) • hydraulic vise HS 125 Specifications Servomill Working area X axis travel Y axis travel Z axis travel table setup area table load capacity (max.) Feed feed speed (infinitely variable) feed per spindle revolution rapid feed X axis rapid feed Y axis rapid feed Z axis

Part No. 103 322 125 024

mm mm mm mm kg

700 570 380 1370 x 300 350

mm/min mm/U mm/min mm/min mm/min

0 - 1000 0.01 - 1 5000 3000 2000

• divider ST 130 • milling chuck set ISO 40 • clamping tools, assorted De Luxe 16 / M14 Vertical Cutter Head speed range (infinitely variable, back gear ranges) spindle mount quill stroke Drive Capacities main motor rating power supply Dimensions / Weight dimensions weight Part No.

110 960 106 044 105 300

rpm

50 - 4000

ISO 40 125

kW V

3.7 400

mm kg

2540 x 2156 x 2235 1590 301 250

For more information and options, visit www.knuth.de

Servomill

• preloaded ball screw • electronic hand-wheels

Conventional Multipurpose Milling Machine for workshop applications, single parts production and training purposes

• Preloaded ball screws on all axes: - less errors due to backlash - increased precision - reduced heat accumulation - less wear • Rigid machine base: - doveteail guide on X axis

- all guides are hardened and ground - wide square guides on Y and Z • Universal cutter head: - pneumatic tool clamping - powerful 3.7 kW motor - LED speed indicator - manual coarse feed for quill

- quill with micrometer depth stop - infinitely variable spindle speed including back gear - spindle brake

For more information and options, visit www.knuth.de

M i l l i ng

Multipurpose Milling Machine

taper turning unit is included

• heavy machine bed made of premium cast-iron with hardened and ground guideways • massive headstock with high-precision spindle running in tapered roller bearings, and 2 lathe chuck mounts • gears are hardened and ground • high torque at the working spindle ensures high chip removal rates when machining parts with large diameters • powerful main drive motor with 7.5 to 11 kW power • central, easy to operate control for feeds and thread leads • wide spectrum of inch and metric threads • heavy-duty 4-station tool holder • including high-performance coolant system • taper turning unit with 500 mm turning length

Standard Equipment: 3-axis position indicator, 4-station tool holder, two 3-jaw lathe chucks 400 mm (TubeTurn 135), 3-jaw lathe chuck 500 mm (TubeTurn 200 & 225), 4-jaw face chuck 520 mm (TubeTurn 200 & 225), coolant system, operator manual Options for this machine can be found on our website under TubeTurn (product search) Speciﬁcations TubeTurn Working area center width turning diameter over bed (max) turning diameter over support (max) X axis travel Z axis travel Headstock speed range headstock torque (max.) lathe chuck diameter spindle bore spindle bore inside chuck Feed X axis rapid feed Z axis rapid feed

135

200

225

mm mm mm mm mm

1350 630 350 340 1350

1350 670 390 340 1350

rpm Nm mm mm mm

14 - 750 2700 400 135 133

17 - 300 2050 500 200 197

17 - 300 2050 500 225 223

mm/min mm/min

4000 4000

For the latest specials, visit

www.knuth.de

TubeTurn Tube Lathe with large spindle bore and dual lathe chuck for long tubes â&#x20AC;˘ spindle bore from 135 to 225 mm

incl. Position Indicator

TubeTurn 225 is shown

SpeciďŹ cations TubeTurn Tool Carrier number of tool stations tool shank dimensions Tailstock tailstock taper tailstock quill diam. tailstock quill stroke Drive Capacities main motor rating total connected load Dimensions / Weight overall dimensions (LxWxH) weight Part No. with position indicator

135

200

225

qty mm

4 32 x 32

mm mm

MT 5 100 205

kW kVA

11 12

7.5 9

mm kg

3657 x 1449 x 1393 4100 301 739

3657 x 1449 x 1393 4190 301 740

3657 x 1449 x 1413 4264 301 741

For more information and options, visit www.knuth.de

CN C M achi ni ng

Box-way Lathes

Furnished with completely assembled 3-axis position indicator

Standard Equipment for DL E Heavy: 3-axis position indicator, 4-jaw independent chuck (DL E 500 und 630 Serie Ø = 1000 mm DL E 800 series Ø = 1400 mm, DL E 1000 series Ø = 1600 mm), coolant system, steady rest (DL E 500 series 50 - 470 mm, DL E 620 series 50 - 590 mm, DL E 800 and 1000 series 220 - 630 mm), follow rest 50 - 220 mm (except DL E 800 and 1000 series ), halogen work lamp, centers, reducing sleeves, foundation bolts, central lubrication, operating tools, operator manual

rest diameters up to 1100 mm (option for DL E Heavy 1000)

Options steady rest for series • DL E Heavy 500, 220 - 630 mm Part No. 250 641 • DL E Heavy 620, 220 - 630 mm Part No. 250 642 • DL E Heavy 800, 260 - 900 mm Part No. 250 644 • DL E Heavy 1000, 500 - 1100 mmPart No. 250 646 Specifications DL E Heavy center width turning diameter - over bed (max) - over support (max) travel - X axis - Z axis - Z1 axis workpiece weight (max.) bed width top-slide swivel range spindle speed (forward/reverse) spindle bore spindle mount feed - X axis - Z axis - Z1 axis rapid feed - X axis - Z axis thread cutting - metric - diametric - module - Whitworth tailstock quill taper diam. tailstock quill stroke tailstock cross adjustment headstock motor rating / voltage overall dimensions (LxWxH) weight Part No. with position indicator

mm mm mm mm mm mm kg mm rpm mm mm/U mm/U mm/U mm/min mm/min mm DP mm GPZ mm mm mm kW / V m kg

500/1500 1500

follow rest for series • DL E Heavy 800, 50 - 220 mm • DL E Heavy 1000, 50 - 220 mm

500/3000 500/5000 3000 5000 1000 650 510 1300 2800 4800 300 6000 755 ± 180° 3,15 - 315 (21) / 3,15 - 400 (12) 130 ISO A2-15 0,064 - 12 0,032 - 6 0,016 - 3 1870 3740 1 - 120 (45) 30 - 1/4 (42) 0,5 - 60 (46) 0,5 - 60 (48) metrisch 80 / 160 300 ± 2,5 22 / 400 4,6 x 1,85 6,1 x 1,81 8,1 x 1,81 x 1,79 x 1,79 x 1,79 9350 10850 12650 300 499 300 500 300 502

500/8000 8000

7800

11,1 x 1,81 x 1,79 16100 300 504

620/1500 1500

Part No. 250 643 Part No. 250 645

620/3000 620/5000 3000 5000 1250 900 630 1300 2800 4800 300 6000 755 ± 180° 3,15 - 315 (21) / 3,15 - 400 (12) 130 ISO A2-15 0,064 - 12 0,032 - 6 0,016 - 3 1870 3740 1 - 120 (45) 30 - 1/4 (42) 0.5 - 60 (46) 0,5 - 60 (48) metrisch 80 / 160 300 ± 2,5 22 / 400 4,6 x 1,81 6,1 x 1,88 8,1 x 1,88 x 1,79 x 1,92 x 1,92 9750 11550 13300 300 505 300 506 300 508

For the latest specials, visit www.knuth.de

620/8000 8000

7800

11,1 x 1,88 x 1,92 16800 300 510

DL E Heavy

• 22 kW motor • maximum part weight 10 t

130 mm spindle bore, large turning diameter and center widths up to 8000 mm • powerful 22-kW motor ensures very high chip removal capacity • induction hardened and ground guideways • large spindle bearings • overload clutch is mounted inside apron

Specification DL E Heavy center width turning diameter - over bed (max) - over support (max) travel - X axis - Z axis - Z1 axis workpiece weight (max.) bed width top-slide swivel range spindle speed (forward/reverse) spindle bore spindle mount feed - X axis - Z axis - Z1 axis rapid feed - X axis - Z axis thread cutting - metric - diametric - module - Whitworth tailstock quill taper diam. tailstock quill stroke tailstock cross adjustment headstock motor rating / voltage overall dimensions (LxWxH) weight Part No. with position indicator

mm mm mm mm mm mm kg mm rpm mm mm/U mm/U mm/U mm/min mm/min mm DP mm GPZ mm mm mm kW / V m kg

800/3000 3000

• a heavy, large cast-iron body and machine bed with strong ribbing reduce vibrations to a minimum • Joystick control for X and Z axis feed is mounted directly to support • hand lever for tailstock adjustment (only on machines with a center width above 3000 mm) • separate rapid feed motor for X and Z axis • sturdy multi-disk clutch for headstock drive

800/5000 800/8000 5000 8000 1600 1280 820 2800 4800 7800 200 6000 970 ± 180° 2,5 - 250 (21) / 3,15 - 250 (12) 130 ISO A2-15 0.064 - 12 0.032 - 6 0.016 - 3 1870 3740 1 - 120 (45) 30 - 1/4 (42) 0,5 - 60 (46) 0,5 - 60 (48) metrisch 80 / 160 300 ± 2,5 22 / 400 6,04 x 2,06 8,04 x 2,06 11,04 x 2,06 x 2,23 x 2,23 x 2,23 12900 16200 21020 300 512 300 514 300 516

1000/2000 2000

1800

5,2 x 2,2 x 2,4 13000 300 518

1000/3000 1000/5000 3000 5000 2000 1600 1020 2800 4800 200 10000 1100 ± 180° 2 - 200 (21) / 2,5 - 200 (12) 130 ISO A2-15 0.064 - 12 0.032 - 6 0.016 - 3 1870 3740 1 - 120 (45) 30 - 1/4 (42) 0,5 - 60 (46) 0,5 - 60 (48) metrisch 80 / 160 300 ± 2,5 22 / 400 6,1 x 2,2 8,1 x 2,2 x 2,4 x 2,4 18500 23200 300 519 300 520

For more information and options, visit www.knuth.de

1000/8000 8000

7800

12,92 x 2,38 x 2,51 30080 300 522

Tur ni ng

Universal Heavy-Duty Lathe

DL B

extensive standard equipment

Rigid and Accurate – for machining of part diameters up to 105 mm • extra heavy ribbed machine bed • induction hardened and ground guideways • massive headstock with high-precision spindle running in tapered roller bearings • gears are hardened and ground • large capacity spindle bore of 105 mm • central, easy to operate control for feeds and thread leads • wide spectrum of diametric, inch, module, and metric threads • support and top slide are designed for high cutting forces

• joystick control for X and Z feeds mounted directly to support • powerful 11 kW motor for powerful machining • overload clutch is mounted inside apron • includes completely assembled 3-axis position indicator

DL 465/3000B shown

Specifications DL center width max. turning diameter - over bed - over support - over gap bridge gap bridge length bed width spindle speeds (quantity/range) spindle bore spindle taper longitudinal feeds transverse feeds rapid feed (longit/transv) max. cross slide travel max. top slide travel

100

465/1500B 1500

465/3000B 3000

465/4000B 4000

465/5000B 5000

550/1500B 1500

550/3000B 3000

550/4000B 4000

550/5000B 5000

mm mm mm mm mm

950 670 1120 390 550

1100 790 1270 390 550

min-1 mm

(18) 6-800

mm/rev mm/rev mm/min mm mm

(18) 6-800 105 MK5 0,1 - 24 0,05 - 12,15 4000

500

575 200

For the latest specials, visit www.knuth.de

Tur ni ng incl. position indicator

rigid 4-station tool holder plus one follow rest (included)

Standard Equipment DL B: position indicator, 3-jaw chuck Ø 325 mm, 4-jaw independent chuck Ø 500 mm, face plate Ø 950 mm (DL465), face plate Ø 1100 mm (DL550), change gears, 4-station tool holder, coolant system, steady rest 75 - 320 mm, follow rest 30 - 80 mm, chuck guard, protective shield for support, halogen work lamp, steady center, operating tools, operator manual

Options

Part No.

• steady rest 280 - 480 mm 250 649 • coolant concentrate 5 L 103 184 • radius cutter head 103 350 • quick-adjusting spindle bore stop, size 10, 90-110 mm 103 026 • quick-change tool holder Set, WC 103196 For additional options for this machine, visit our website and search for DL B (Product Search) Specifications DL swing range of top slide tapping - metric - Whitworth - module - diametric tailstock quill taper diam. tailstock quill stroke tailstock transverse adjustment motorating motorvoltage dimensions (LxWxH) weight Part No.

465/1500B

465/3000B

465/4000B

mm mm DP mm mm mm kW V mm kg

3510x1550 x1670 4850 301 470

5010x1550 x1670 5900 301 472

6010x1550 x1670 6600 301 474

465/5000B 550/1500B +/- 90° (50) 1-240 (26) 14 -1 (53) 0,5-120 (24) 28-1 MK5 / Ø100 250 +/- 15 11 380 7010x1550 3510x1590 x1670 x1760 7700 5250 301 476 301 478

For more information, visit www.knuth.de

550/3000B

550/4000B

550/5000B

5010x1590 x1760 6300 301 480

6010x1590 x1760 7100 301 482

7010x1590 x1760 8100 301 484

101

102

For the latest specials, visit www.knuth.de

weight Part No. incl. position indicator

rapid feed (longit./transv) max. cross-slide travel max. top-slide travel top-slide swivel range tapping - metric - Whitworth - module - diametric tailstock taper / Ø tailstock quill stroke tailstock cross adjustment motor rating / voltage overall dimensions (LxWxH)

Specifications Sinus center width max. turning Ø over bed max. turning Ø over support max. turning Ø w/o bridge bridge length bed width spindle speed (steps) spindle bore Ø spindle mount / taper longitudinal feeds transverse feeds

mm TPI mm DP mm mm mm kW/V mm

m/min mm mm

mm/rev mm/rev

mm mm mm mm mm mm rpm mm

4/2 368 230 45° (54) 0,45 - 120 (54) 0,44 - 80 (46) 0,25 - 60 (42) 0,88 - 160 MT 5 / 90 235 12,5 7,5 / 400 3210 x 1230 x 1600 2700 300 010

4/2 368 230 45° (54) 0,45 - 120 (54) 0,44 - 80 (46) 0,25 - 60 (42) 0,88 - 160 MT 5 / 90 235 12,5 7,5 / 400 3707 x 1230 x 1595 2900 300 011

330/2000 D 2000 660 440 900 320 400 25 - 1600 (16) 105 D1-8 / MT5 (25) 0,044 - 1,48 (25) 0,022 - 0,74 4/2 368 230 45° (54) 0,45 - 120 (54) 0,44 - 80 (46) 0,25 - 60 (42) 0,88 - 160 MT 5 / 90 235 12,5 7,5 / 400 4707 x 1230 x 1595 3300 300 012

330/3000 D 3000 660 440 900 320 400 25 - 1600 (16) 105 D1-8 / MT5 (25) 0,044 - 1,48 (25) 0,022 - 0,74 4/2 420 230 90° (54) 0,45 - 120 (54) 7/16 - 80 (46) 0,25 - 60 (42) 0,88 - 160 MT 5 / 90 235 11 7,5 / 400 3240 x 1140 x 1140 3220 300 015

4/2 420 230 90° (54) 0,45 - 120 (54) 7/16 - 80 (46) 0,25 - 60 (42) 0,88 - 160 MT 5 / 90 235 11 7,5 / 400 3740 x 1140 x 1910 3505 300 013

400/2000 D 2000 800 570 1035 250 400 25 - 1600 (16) 105 D1-8 / MT5 (25) 0,044 - 1,48 (25) 0,022 - 0,74 4/2 420 230 90° (54) 0,45 - 120 (54) 7/16 - 80 (46) 0,25 - 60 (42) 0,88 - 160 MT 5 / 90 235 11 7,5 / 400 4740 x 1140 x 1910 3870 300 014

400/3000 D 3000 800 570 1035 250 400 25 - 1600 (16) 105 D1-8 / MT5 (25) 0,044 - 1,48 (25) 0,022 - 0,74

• overload protection for feed shaft and leadscrew • rapid feed

400/1500 D 1500 800 570 1035 250 400 25 - 1600 (16) 105 D1-8 / MT5 (25) 0,044 - 1,48 (25) 0,022 - 0,74

large parts • manual central lubrication • multi-disk clutch for soft starts when working with heavy parts • automatic lubrication of headstock and main gears • protected leadscrew

330/1500 D 1500 660 440 900 320 400 25 - 1600 (16) 105 D1-8 / MT5 (25) 0,044 - 1,48 (25) 0,022 - 0,74

• removable bridge for machining of large parts with diameters up to 1035 mm • high precision and quiet operation even at maximum loads • heavy, large bed • hardened guideways (>HB 400) • 105 mm spindle capacity for machining of

Precision Lathe with large center height and spindle bore of 105 mm, including taper turning and assembled 3-axis position indicator

Sinus D

Precision Lathe

Taper turning feature (included)

Quick change tool holder (option)

For more information, visit www.knuth.de

103

Sinus D 330/2000 shown

Total Price including 3-axis position indicator (assembled) (Product Search)

Tur ni ng

For available options for this machine, visit our website and search for Sinus D

Standard Equipment: 3-axis position indicator, 3-jaw chuck (315 mm diam.), 4-jaw chuck (400 mm diam.) face place with 450 mm diam., dog plate, 4-station tool holder, up to 2000 mm center width, includes splatter guard (wall); from 3000 mm upwards with splatter guard (moves along with support), coolant system, steady rest and follow rest, taper turning feature, chuck guard, halogen work lamp, reducing sleeves, dead centers, operating tools, operator manual

104

For the latest specials, visit

www.knuth.de

320 570

230/1000 1000

320 571

320 575

320 572

320 573

320 574

280/2000 280/3000 1928 2928 560 355 785 170 350 (12) 25 - 1600 L 25-200 / H 200-1600 80 Camlock D1-8 / MT7 0.059 - 1.646 0.020 - 0.573 316 130 ± 52° (47) 0.2 - 14 (60) 2 - 112 TPI (39) 0.1 - 7 (50) 4 - 112 MT 5 / 75 180 ± 12 7.5 / 400 2840x1150 3340x1150 4340x1150 x1460 x1460 x1460 2370 2720 3430 320 559 320 560 320 561

280/1500 1428

• large number of thread leads • removable bridge for machining of large diameters • stop spindle with four adjustable linear stops • a quick-action tool changer system is available as an option

230/1500 230/2000 1500 2000 460 270 690 165 300 (12) 25 - 2000 L 30-600 / H 600-3000 58 Camlock D1-6 / MK 6 mm/rev 0,031 - 1,7 mm/rev 0,014 - 0,784 mm 285 mm 128 ± 52° mm (41) 0,1 - 14 TPI (60) 2 - 112 mm (34) 0,1 - 7 DP (50) 4 - 112 mm MK 4 / 60 mm 120 mm ± 13 kW / V 5,5 / 400 mm 2200x1080 2750x1080 3250x1080 x1340 x1340 x1340 kg 1720 1970 2100 320 555 320 558 320 557

mm mm mm mm mm mm rpm rpm mm

Part No. with position indicator a. infin. variable speed adjust.

weight Part No. with position indicator

Specifications Turnado center width max. turning diam. over bed - over support - over bridge bridge length bed width spindle speed (quantity/range) incl. infin. variable speed adjustment spindle bore spindle mount / taper longitudinal feeds transverse feeds max. cross-slide travel max. top-slide travel top-slide swivel range - metric Thread Cutting - Whitworth - module - diametric tailstock quill taper / Ø tailstock quill stroke tailstock cross adjustment motor rating / voltage overall dimensions (LxWxH)

• Low Price and Lasting High Value • well arranged control panel with ergonomically located selectors • Camlock spindle mount D1-6 and D1-8 • wide bed, ground and hardened • tailstock can be moved sideways for taper turning

A proven classic in 2 designs: with manual transmission, or with infinitely variable speed adjustment and constant speed (vconst)

Turnado 230 • 280

Lead Screw and Feed Shaft Lathes

Turnado with inﬁnitely variable speed adjustment: • back gearing, first-class control technology and a powerful headstock motor allow a wide range of speeds and high torque for powerful machining • very quiet operation at maximum spindle speed • max. speed for the Turnado 230 series is 3000 rpm, infinitely variable • the extensive features of the X.Pos Position Indicator are complemented by a speed display and vconst (constant speed) function: During face turning, the spindle speed automatically adapts to the changing workpiece diameter – the constant cutting speed at the cutting edge of the turning tool ensures superior turning results with a quality comparable to CNC lathes

constant cutting speed for a ﬂawless surface throughout

faceplate is included

For more information and options, visit www.knuth.de

105

Options Part No. • 4-jaw lathe chuck 250 mm for Turnado 230 116 624 • 4-jaw lathe chuck 250 mm for Turnado 230 with infinitely variable speed adjustment 146 473 • 4-jaw lathe chuck 315 mm for Turnado 280 146 483 • quick-change tool holder set WB for Turnado 230 103 195 • quick-change tool holder set WC for Turnado 280 103 196 plus assembly 103 315 • live centers MT 4 (Turnado 230) 106 755 • live centers MT 4, assortment (Turnado 230) 106 790 • live centers MT 5 (Turnado 280) 106 760 • oscillation element LT 33 (per piece) for Turnado 230 103 321 Part No. oscillation element LT 55 (per piece) for Turnado 280 103 322 clamped turning tool set 25 mm 108 670 indexable insert set, 25 mm, 30 pieces 108 675 Power Worker chip lift-off device 123 040 knurling tool kit, angled 108 521 knurl holder 108 520 coolant concentrate 5 L 103 184

including stop spindle

For additional options for this machine, visit our website and search for Turnado (Product Search)

• • • • • • •

Tur ni ng

incl. Position Indicator

Standard Equipment: 3-axis position indicator, 3-jaw chuck Ø 250 mm (Turnado 230), 3-jaw chuck Ø 315 mm (Turnado 280), 4-jaw face plate chuck Ø 300 mm (Turnado 230), 4-jaw face plate chuck Ø 400 mm (Turnado 280), face plate Ø 350 mm (Turnado 230), face plate Ø 450 mm (Turnado 280), 4-station tool holder, coolant system, steady and follow rests, stop spindle, splatter guard, chuck guard, foot brake pedal, halogen work lamp, reducing sleeve, steady center, thread gauge, operating tools, operator manual

Ø=100mm S=580rpm

• the extensive features of the X.Pos Position Indicator (catalog page 274) are complemented here with a digital speed indicator and an easy to program auxiliary function Constant speed - During face turning, the spindle speed automatically adapts to the changing workpiece diameter – the constant cutting speed at the cutting edge of the turning tool ensures superior turning results with a quality comparable to CNC lathes • a quick-action tool changer system is available as an option

Ø=80mm S=717rpm

The cutting speed selected by the operator...

Ø=20mm S=2900rpm

... will be held constant by automatically controlling the spindle speed ...

... up to a maximum speed of 3000 rpm.

Specifications V-Turn center width max. turning diam. - over bed - over support - over bridge bridge length bed width spindle speeds (range) spindle bore spindle mount / taper longitudinal feeds transverse feeds max. cross-slide travel max. top-slide travel

106

mm mm mm mm mm mm rpm mm Camlock

mm/rev mm/rev mm mm

410/1000 1000

410/1500 1500

410 255 580 250 250 L 30 - 550 H 550 - 3000 52 D1-6 / MT 6 0,05 - 1,7 0,025 - 0,85 210 140

410 255 580 190 250 L 30 - 550 H 550 - 3000 52 D1-6 / MT 6 0,05 - 1,7 0,025 - 0,85 210 140

Standard Equipment: 3-axis position indicator, 4-jaw chuck (250 mm diam.), face place with 350 mm diam., change gears, 4-station tool holder, coolant system, steady and follow rests, turret stop, micrometer stop, chip tray, splatter guard, support shield, chuck guard, foot brake pedal, halogen work lamp, thread gauge, operating tools, operator manual Options Part No. • 3-jaw chuck, Ø 200 mm Camlock 1-6, 4000 rpm 146 372 • 4-jaw chuck, Ø 200 mm Camlock 1-6, 4000 rpm 146 472 • Quick-change tool holder set WB 103 195 plus assembly 103 315 • Live center MT 4 106 755 • Oscillation element LT 33 (per piece) 103 321 • Clamped turning tool set 16/20/24 mm, 9-pc 108 780 • Clamped turning tool set 25 mm 108 670 • Indexable Insert set 16/20/24 mm, 30-pc 108 782 • Indexable insert set, 25 mm, 30 pieces 108 675 • Coolant concentrate 5 l 103 184 • Power Worker chip lift-off device 123 040 • Turret MT 4 105 050 • Knurl holder 108 520 • Knurling tool kit, angled 108 521 • Quick-adjusting spindle bore stop, size 6 103 020 • Accessory-Set MT 4 8-pc. 104 594 For available options for this machine, visit our website and search for V-Turn (Product Search)

top-slide swivel range tapping - metric mm - whitworth - module mm - diametric DP tailstock quill taper diam. / Ø mm tailstock quill stroke mm tailstock cross adjustment mm motor rating / voltage kW/V dimensions (LxWxH) mm weight kg Part No. inc. position indicator

For the latest specials, visit www.knuth.de

± 45°

(39) 0,2 - 14 (45) 2 - 72 (18) 0,3 - 3,5 (21) 8 - 44 MT 4 / 50 120 ± 13 5,5 / 400 1940 x 850 x 1280 1550 300 820

(39) 0,2 - 14 (45) 2 - 72 (18) 0,3 - 3,5 (21) 8 - 44 MT 4 / 50 120 ± 13 5,5 / 400 2440 x 850 x 1320 1800 300 821

V-Turn 410 Convincing Price and Performance! With infinitely variable speed adjustment and constant cutting speed

including 3-axis position indicator with intergrated spindle speed indicator, completely assembled

Shown with optional accessories

• a heavy ribbed machine bed and a massive one-piece cast-iron frame provide the solid basis for this machine • wide, hardened and ground guideways ensure superior turning results and long life • large spindle bearings and high-precision headstock ensure excellent concentricity • headstock gears and shafts are hardened and ground for quiet operation und constant speed • 5.5 kW headstock motor ensures powerful machining • spindle speeds are infinitely variable from 30 to 550 and 550 to 3000 rpm • micrometer and turret stop are included • integrated central lubrication at the support for low maintenance Quick change tool holder (optionally)

For more information and options, visit www.knuth.de

107

Tur ni ng

Precision Lathe

Universal Lathe

DM 1000 A Large spindle capacity of 52 mm and powerful 5.5 kW motor

incl. position indicator

• heavy-duty bed with large dimensions, hardened and precision-ground, removable bridge • adjustable overload clutch inside the support • large headstock in a solid bearing with Camlock D1/6 • all gears and shafts are hardened and ground and run in an oil-bath Standard Equipment: 3-axis position indicator, 3-jaw chuck Ø 250 mm, 4-jaw face plate chuck Ø 320 mm, face plate Ø 520 mm, change gears, 4-station tool holder, coolant system, steady and follow rests, splatter guard, chuck guard, foot brake pedal, work lamp, reducing sleeve, 2 steady centers, operating tools, operator manual Specifications DM 1000 A center width max. turning diam. - over bed - over support - over bridge bridge length bed width spindle speeds (number/range) spindle bore spindle mount / taper longitudinal feeds transverse feeds max. cross-slide travel max. top-slide travel

108

1000

mm mm mm mm mm rpm mm

400 240 580 200 290 (12) 30 - 1600 52 Camlock D1-6 /MT6 0,039 - 1,1 0,055 - 0,1 225 140

mm/r mm/r mm mm

• manual central lubrication • foot brakes for instant stop and shut-down of the headstock Options 4-jaw lathe chuck 250 mm Quick-change tool holder set WB Live center MT 4 Oscillation element LT 33 Clamped turning tool set 25 mm Coolant concentrate 5 l

top-slide swivel range tapping - metric - whitworth - module - diametric tailstock quill taper diam. tailstock quill stroke tailstock cross adjustment motor rating / voltage dimensions (LxWxH) weight Part No. incl. position indicator

Part No. 116 624 103 195 106 755 103 321 108 670 103 184

± 45° mm mm DP mm mm mm kW / V mm kg

For more information and options, visit www.knuth.de

(25) 0,5 - 20 (35) 80 - 1 3/4 (24) 0,25-10 (30) 160-3 1/2 MT4 / 60 130 ± 10 5,5 / 400 2180 x 970 x 1280 1450 320 612

• Ideal for single part and batch production, or for

Basic 180 Super

The most successful The Basic Series Long record of proven performance in craft and industry applications

Basic 180 V

Basic

training • Universal range of applications • Reliability, Lasting value • User-friendly operation • Excellent price/performance ratio • Short delivery time • Reliable replacement parts availability • High customer satisfaction • After-Sales Service • Quality by Knuth

Basic 170 Super

• Extensive accessory package included

• Powerful drive • Camlock quick-action clamp • Hardened guideways • Lathe beds with heavy ribbing • Rigid, heavy-duty cast-iron design • Basic 180 V with v-const and 3000 min-1 • Gears are hardened and precision-ground • Oil-bath lubrication • Headstock runs in precision-bearings • Large spindle bore

Basic Plus

• Guideways are induction-hardened and ground

• Very quiet operation • Total Price including digital 3-axis assembled • Safety equipment according to CE 109

Lathe

Basic 180 Super Precise tool shop lathe machine at a low price

incl. position indicator

• cast-iron bed, heavily ribbed • all tracks are induction-hardened and precision ground • headstock with D1-4" mount, bore diam. 38 mm, run in 2 adjustable tapered roller bearings • all gears are made of Cr-Ni steel, hardened, precision ground, with oil bath lubrication

• powerful main drive (2.4 kW), including base frame • slides are adjustable via tapered gibs • tailstock can be moved ± 10 mm for taper turning • closed cooling circuit

Standard Equipment: position indicator, 3-jaw chuck Ø 160 mm, 4-jaw face plate chuck Ø 200 mm, face plate Ø 320 mm, 4-station tool holder, coolant system, steady and follow rests, chip tray, splatter guard, chuck guard, foot brake pedal, base, micrometer longitudinal stop, change gears, reducing sleeves, steady center, thread gauge, operating tools, operator manual

For available options for this machine, please visit our website and search for Basic 180 Super (Product Search)

5C Collet Chuck (optional) Specifications Basic 180 Super center width max. turning diam. - over bed - over support - over bridge bridge length bed width spindle speeds (number/range) spindle bore spindle mount / taper longitudinal feeds transverse feeds max. cross-slide travel

110

1000

mm mm mm mm mm rpm mm

356 220 506 206 206 (16) 45 - 1800 38 Camlock D1-4 / MT 5 0,043 - 0,653 0,015 - 0,220 178

mm/r mm/r mm

max. top-slide travel top-slide swivel range tapping - metric - whitworth tailstock quill taper diam. tailstock quill stroke tailstock cross adjustment motor rating / voltage dimensions (LxWxH) weight Part No. incl. position indicator

For the latest specials, visit www.knuth.de

92 ± 50°

(37) 0,4 - 7 (28) 4 - 56 MT 3 / 45 120 ± 10 1,5/2,4 / 400 1945 x 785 x 1204 880 300 805

mm mm mm kW / V mm kg

• Speed up to 3000 min-1 • Consistent cutting speed

Basic 180 V Cost-effective precision lathe provides consistent cutting speed: Vconst!

incl. position indicator

• speed adapts to the part radius - consistent track speed ensures uniform quality finish at any diameter • position indicator with speed display • infinitely variable spindle speed on 2 gear levels Standard Equipment: 3-axis position indicator, 4-jaw faceplate chuck Ø 200 mm, faceplate Ø 320 mm, change gears, 4-station tool holder, coolant system, steady rest and follow rest, chip collection tray, splatter guard, chuck guard, foot brakes, base, halogen work lamp, axial micrometer stop, reducing sleeve, dead center, thread gauge, operating tools, operator manual

Consistent cutting speed Vconst. Shown with optional accessories: Specifications Basic 180 V center width max. turning diam. - over bed - over support - over bridge bridge length bed width spindle speed (inf. variable) (range) spindle bore spindle mount/taper longitudinal feeds transverse feeds

• 3-jaw chuck Ø 160 mm Camlock 1-4“ 4500 min- 1 • 4-jaw chuck Ø 160 mm Camlock 1-4“ 4500 min-1

1000

mm mm mm mm mm min-1

356 220 506 206 206 L 45 - 1800 H 155 - 3000 38 Camlock D1-4 / MT 5 0.043 - 0.653 0.015 - 0.220

mm mm/rev mm/rev

Part No. 146 378 Part No. 116 600

max. cross slide travel compound travel swivel range - compound tapping - metric - Whitworth tailstock quill taper/ -Ø tailstock quill stroke tailstock transverse adjustment motor rating/voltage dimensions (LxWxH) weight Part No. incl. position indicator

mm mm

178 92 ± 50°

(37) 0,4 - 7 (28) 4 - 56 MT 3 / 45 120 ± 10 4 / 400 1945 x 785 x 1204 880 300 807

mm mm mm kW / V mm kg

For more information and options, visit www.knuth.de

111

Tur ni ng

Mechanics Lathe

Basic Plus ‘Low-Cost-Version’ leadscrew and feed shaft lathe

incl. position indicator

• cast-iron bed, heavily ribbed • induction-hardened and precision ground tracks • headstock with camlock D1-4" mount, bore diam. 38 mm, run in 2 adjustable

precision tapered roller bearings • tracks adjustable via tapered gibs • tailstock can be moved ± 10 mm for taper milling

Standard Equipment: position indicator, 3-jaw chuck Ø 160 mm, 4-jaw face plate chuck Ø 200 mm, face plate Ø 250 mm, 4-station tool holder, steady and follow rests, chip tray, splatter guard, chuck guard, base, change gears, reducing sleeves, steady centers, thread gauge, operating tools, operator manual For available options for this machine, please visit our website and search for Basic Plus (Product Search)

turret (option) Specifications Basic Plus center width max. turning diam. - over bed - over support - over bridge bed width spindle speeds (number/range) spindle bore spindle mount / taper longitudinal feeds transverse feeds max. cross-slide travel

112

810

mm mm mm mm rpm

300 178 430 180 (9) 60 - 1500

38 Camlock D1-4 / MK 4 0,052 - 1,392 0,014 - 0,38 175

mm/r mm/r mm

For the latest specials, visit www.knuth.de

95 ± 60°

(26) 0,4 - 7 (34) 4 - 56 MK 3 / 32 100 ± 10 1,1 / 400 1600 x 750 x 1270 520 300 809

mm mm mm kW / V mm kg

Basic 170 Super

max. spindle speed 2000 rpm

Solid Precision Bench Lathe with large center width incl. position indicator

• hardened and ground headstock gears • gapped bedway • max. speed 2000 min-1 • adjustable headstock bearing • oil-bath lubricated main drive and feed gear • shift gear system to change feed direction • cast-iron bed, double v-guide,

hardened and ground • interlocking feature prevents simultaneous advance of leadscrew and feed shaft • double-walled apron box with oil-bath lubrication

Standard Equipment: position indicator, 3-jaw chuck Ø 160 mm, 4-jaw face plate chuck Ø 200 mm, face plate Ø 320 mm, 4-station tool holder, steady and follow rests, splatter guard, chuck guard, foot brake pedal, base, halogen work lamp, steady center, operating tools, operator manual For available options for this machine, please visit our website and search for Basic 170 Super (Product Search)

steady rest (standard) Specifications Basic 170 Super center width max. turning diameter - over bed - over support - over bridge bridge length bed width spindle speeds (number/range) spindle bore spindle mount / taper longitudinal feeds transverse feeds

1000

mm mm mm mm mm rpm

330 198 470 210 166 (8) 70 - 2000

38 Camlock D1-4 / MT 5 0,052 - 1,392 0,014 - 0,38

mm/r mm/r

max. cross-slide travel max. top-slide travel top-slide swivel range tapping - metric - whitworth tailstock quill taper diam. tailstock quill stroke tailstock cross adjustment motor rating / voltage dimensions (LxWxH) weight Part No. incl. position indicator

For more information, visit www.knuth.de

mm mm

170 95 ± 360°

(26) 0,4 - 7 (34) 4 - 56 MT 3 / 33 100 ± 10 1,5 / 400 1830 x 680 x 1320 520 300 815

mm mm mm kW / V mm kg

113

Tur ni ng

Mechanics Lathe

Turret Lathe

HRD 42PF • HRD 60PF High productivity, easy handling – the ideal option for series production

Drilling with the HRD HRD 60PF shown

• infinitely adjustable speed across two gear steps • a powerful drive motor (5.5 kW) provides plenty of power at all speed levels • fine speed adjustments from 120 to 2000 rpm • automatic tool turret change-over and single-lever operation against adjustable end stops allow short machining times and maximum repeatability • minimized downtimes when using the bar feeding feature and cut-off unit Standard Equipment: coolant system, bar feeder, collet chuck Specifications max. part - round - hexagonal - square collet mount travel - axial slide - cross slide

114

HRD 42PF

HRD 60PF

mm mm mm Ø

42 36 30 30, 42

60 51 41 42, 60

mm mm

90 100

Pneumatic collet clamping with 5.8 bar pressure; uses 0.15 l air per clamping

Collet mount collet diameter (1 mm increm.) Part No.

- turrent slide - cut-off slide main rating 400V spindle speed coolant pump weight with bar feeder dimensions (LxWxH) Part No.

For the latest specials, visit

mm mm kW min-1 kW kg mm

Ø 42 mm 03 - 42 mm 116 1+Ø

150 35 5,5 (2) 120-2000 0,1 880 1600x800x1600 100 823

www.knuth.de

Ø 60 mm 04 - 60 mm 116 0+Ø

150 35 5,5 (2) 120-2000 0,1 910 1600x800x1600 100 826

LS 750

including 2-axis position indicator, fully assembled

Compact Precision Bench Lathe with large center width universal use in workshops and training facilities Rigid cast-iron machine bed with hardened and ground dual V-guides.

Standard Equipment: 2-axis position indicator, base, 3-jaw lathe chuck (120 mm), follow rest and steady rest, face plate, operator manual

• all guides are adjustable • large headstock with adjustable tapered roller bearings and 25 mm capacity • headstock gears run in oil-bath and feature hardened gears and 6 gear steps • feed gears with oil-bath lubrication, featuring a wide selection of fine incremented feeds and frequently used thread leads

follow rest and steady rest (included) Speciﬁcations LS 750 Working area center width turning Ø over bed / support (max) max. turning Ø without gap X / Z1 axis travel workpiece weight (max.) bridge length bed width top-slide swivel range Headstock speed range spindle bore spindle taper Feed X axis feed

mm mm mm mm kg mm mm

750 280 / 164 240 155 / 80 15 750 155.5 ± 45°

rpm mm

125 - 2000 25 MT 4

mm/rev

0.03 - 0.3

• feed shaft with overload clutch for automatic feed on X and Z • leadscrew ensures precise thread turning • 2-axis position indicator is standard equipment

Z axis feed X axis rapid feed Z axis rapid feed Thread Cutting thread cutting, module thread cutting, Whitworth Tailstock tailstock taper tailstock quill stroke Drive Capacities motor rating, headstock (400 V) Dimensions / Weight dimensions weight Part No. with position indicator

For more information, please visit www.knuth.de

mm/rev mm/min mm/min

0.015 - 0.15 3.75 - 600 1.875 - 300

mm TPI

0.25 - 2.5 12 - 96

MT 2 85

0,735

mm kg

1500 x 750 x 1400 230 101 560

115

Tur ni ng

Precision Bench Lathe

Universal Lathe/Milling Machine

Universa 550 V incl. 2-axis position indicator

Turning - Milling - Drilling - the ideal machine for the demanding requirements of model builders, training facilities, and precision mechanics

Turning

Drilling / Milling

Digital length measuring system on Z and X axes

• very practical machine with leadscrew for turning / milling / drilling of parts • infinitely variable speed in 2 ranges - for turning with quiet belt drive, for milling with 2-step gears • easy tooling change-over from turning to drilling / milling • rigid machine bed with hardened and ground guideways, taper gibs for zero-backlash adjustments • precision bearings ensure high spindle concentricity • tailstock adjustable for tape turning • milling unit with swivel head Specifications Universa 550 V Turning center width max. turning diameter - over bed - over support bed width spindle speeds (inf. variable) 2 steps via belt drive spindle bore spindle mount / taper longitudinal feeds max. cross slide travel max. top slide travel Tapping - metric - inch tailstock quill taper / -Ø

116

550

mm mm mm min-1

mm/rev mm mm

250 150 135 Lo 50 - 1250 Hi 100 - 2500 26 MT 4 0.07 - 0.20 70 115

mm TPI mm

0.4 - 3.5 8 - 56 MT 2 / Ø35

• cross slide with T-slots for parts clamping

Standard Equipment: position indicator, 3-jaw chuck Ø 125 mm, digital speed indicator, 4-station tool holder, chip tray, splatter guard wall, chuck guard, base, operating tools, operator manual

tailstock quill stroke tailstock cross adjustment motor rating/ voltage Milling max. drilling capacity max. end milling cap. spindle mount spindle-to-table distance throat head swivel speed (infin. variable) 2 gear steps motor rating / voltage dimensions (LxWxH) weight Part No. incl. position indicator

For the latest specials, visit

www.knuth.de

mm mm kW / V

70 6 0.75 / 230

mm mm

16 16 MT 2 150 175 ± 90° Lo 50 - 1125 Hi 100 - 2250 0.5 / 230 1200 x 530 x 1550 240 101 490

mm mm min-1 kW / V mm kg

Universa 700 Proven Concept in a new Performance Class Turning - Milling - Drilling with feed shaft and leadscrew for linear and planar feed

Standard Equipment: 2-axis position indicator, 3-jaw chuck (160 mm diameter), digital speed display, depth indicator, 4-station tool holder, chip collection tray, splatter guard, chuck guard, leadscrew cover, base, operating tools, operator manual

• rigid machine bed with hardened and ground guides, zero-backlash adjustment via taper gibs • infinitely adjustable speed control with variable frequency drive headstock motor, and digital speed indicator • 160 mm lathe chuck with large headstock, plus adjustable tapered roller bearings and 38 mm wide capacity • tailstock can be adjusted for taper turning • micro-stepped feed drive with oil-bath lubrication for a wide selection of increments and feeds per change gear pairing Speciﬁcations Universa 700 Working area center width max. turning diameter - over bed - over support bed width X axis travel Z1 axis travel top-slide swivel range center height Headstock spindle speed (forward/reverse) spindle capacity spindle mount spindle taper Feed X axis feed Z axis feed

700

mm mm mm mm mm

280 165 180 140 80 180° 280

rpm 50 - 1800 mm 38 cylindrical centering 70 mm stud bolts and ﬂanged nuts MT 5 mm/rev mm/rev

0.07 - 0.40 0.02 - 0.28

including 2-axis position indicator, fully assembled

• cutter head/headstock drive with 2 gear steps and infinitely variable spindle speed • large setup area on a cross-slide with 2 T-slots • quill can be moved by a capstan handle (star wheel) for drilling work, or by micro-feed via hand-wheel for milling Thread Cutting - metric - Whitworth tailstock tailstock quill diam. tailstock taper tailstock quill stroke Vertical Cutter Head drilling capacity end milling spindle mount spindle nose-to-table distance Drive Capacities headstock motor rating power supply Dimensions/Weight dimensions weight Part No. with position indicator

For more information, please visit www.knuth.de

mm TPI

0.2 - 3.5 8 - 56

30 MT 3 80

mm mm mm mm

16 63 MT 2 185

kW V

1.1 400

mm kg

1235 x 624 x 1700 230 101 500

117

Tur ni ng

Universal Lathe with integrated cutter head

Mini CNC Drill Press/Milling Machine Combo

PicoMill CNC Small CNC Lathe for training, model construction and small batch productions • manual central lubrication • infinitely variable spindle speeds

• standard electronic hand-wheel • rigid cast-iron frame with wide dovetail guides • preloaded ball screws on all axes

PicoMill CNC is shown with GPlus 450

Options for this machine can be found on our website under PicoMill (product search)

Standard Equipment: GPlus 450 or Siemens 808 D control, drill chuck (diam. 1-13 mm), central lubrication, base frame, operating tools, operator manual and programming instructions

Specifications PicoMill CNC drill capacity in steel end milling up to max. cutter head diam. max. spindle-to-table dist. spindle stroke throat spindle mount spindle speeds table setup area table travel

118

mm mm mm mm mm mm rpm mm mm

25 20 80 250 80 232 MT 3 150 - 2000 450 x 160 254 x 105

Standard Cycles Milling: circular pocket, rectangular pocket, arc pocket, face milling, thread cutting (male and female), circular stud milling, rectangular stud milling Drilling: Basic drilling or delayed drilling (dwell time), deep-hole drilling, tapping with compensating chuck Drill Patterns: bolt hole line, bolt hole circle/ segment, free drill positioning, rectangle / parallelogram

repeatability positioning accuracy motor rating overall dimensions (LxWxH)

weight kg Part No. with GPlus 450 control

0.01 0.01 1 830 x 800 x 1700 391 180 511

Part No. with Siemens 808D control

180 512

For the latest specials, visit

www.knuth.de

mm mm kW mm

Drilling up to 25 mm

PicoTurn CNC Small CNC Lathe for training, model construction and small batch productions • automatic 4-station tool changer • infinitely variable spindle speeds • small footprint

• manual central lubrication • preloaded ball screws • electronic hand-wheel

PicoTurn CNC is shown with GPlus 450

Standard cycles for turning: plain turning, facing, taper turning, radius turning, plunge-cuts, recessing forms E and F, thread turning, multiple thread turning, contour turning Standard Equipment: GPlus 450 or Siemens 808 D control, 3-jaw chuck (125 mm diam.), automatic 4-station tool changer, central lubrication, base frame, operating tools, operator manual and programming instructions Options turning tool set, 12 mm

automatic tool changer is included Specifications PicoTurn CNC center width max. turning diam. over bed bed width spindle speed, infinitely var. spindle mount longitudinal feeds transverse feeds rapid feed (longit./transv) max. cross-slide travel tailstock quill taper / Ø

mm mm mm rpm mm/min mm/min mm/min mm mm

550 250 135 150 - 1750 MT 3 500 250 2000/1000 75 MT 2 / 30

tailstock quill stroke tailstock cross adjustment motor rating / voltage connected load overall dimensions (LxWxH) weight Part No. with GPlus 450 control

Part No. 108 680

mm mm kW / V kVA mm kg

Part No. with Siemens 808D control

For more information and optional accessories, visit www.knuth.de

50 ±4 1 / 230 1.6 1200 x 530 x 1300 400 180 501 180 502

119

Tur ni ng

Mini CNC Lathe

CNC Programming Station

GPlus 450

Software and work preparation plus CNC training without having to use an actual CNC machine. Utilize the advantages of a GPlus 450-Dry • every individual in the class is included at all times

Machine

• every trainee‘s work can be monitored • trainers have the full attention of the whole class at all times GPlus 450-Dry workstation and machine with GPlus 450 control provide a completely integrated training package! Take advantage of this excellent programming and training system to increase your productivity and reduce your production cost!

Master

Trainee

Prerequisites for GPlus 450-Dry Software (Single Workstation): • Industrial computer with Intel processor • Win2000 or WinXP Operating System • At least a 17" monitor with a resolution of 1280 x 1024, ideally the monitor should be vertically adjustable Prerequisites for multiple workstations: Class Management Software (e.g. Vision6). The basic requirement is a standard PC, on which the GPlus 450-Dry Software can be installed to easily adapt the PC for various requirements (turning or milling). The user interface of the PC matches the machine's user interface. Application Example: The required number of PCs can be prepared in a class room by installing the respective software packages and dongles (copyright protection feature in form of a connector). This way the trainer can teach while each individual trainee can individually program at their workstations to store, simulate and learn NC programming in a hands-on fashion. A USB port and RJ-45 Ethernet interface are included for easy data transfers to the machine.

GPlus 450-Dry Software (per workstation): • GPlus 450-Dry Software for 3- and 4-Axis Milling (incl. dongle) Part No. 577 190 • GPlus 450-Dry Software for Turning (incl. dongle) Art.-Nr. 577 191 • Class Room License for 15 + 1 workstations: e.g. GPlus 450-Dry Software for 3- and 4-Axis Milling (incl. dongle) Part No. 577 193

120

For more information, visit

www.knuth-gplus.de

Portamill High precision for large workpieces • heavy cast-iron machine frame provides a rigid structure with firmly integrated gantry; the setup table provides support across the entire travel distance, including heightadjustable traverse

Portamill 208 is shown

• large setup table is moving on a rigid combination of v-guides and box-ways with ground surfaces for maximum accuracy across the entire work area, independent of table loads and load distribution • this machine type handles work pieces with weights up to 2000 kg • the manually shifted 6-step gear delivers high torque

at the headstock • infinitely variable automatic feed on X axis • mechanical axis clamping on all axes • swiveling control panel with long arm allows a wide action radius for the user • automatic central lubrication is included

Standard Equipment: 3-axis position indicator, automatic central lubrication, work lamp, foundation bolts, operating tools, operator manual For additional options for this machine, visit our website and search for Portamill (product search) Speciﬁcations Portamill Working area X axis travel Y axis travel Z axis travel table dimensions table load capacity (max.) T-slots (number/width/spacing) spindle nose-to-table distance Headstock speed range torque (max.) spindle mount Feed X axis rapid feed

208

308

mm mm mm mm kg mm

2000 1100 800 2000x800 2000 5x22x160

3000 1100 800 3000x800 2000 5x22x160

0-800

rpm Nm

82-505 790 ISO 50

1400

mm/min

Y axis rapid feed Z axis rapid feed (gantry) Z axis rapid feed (cutter head) work feed X axis work feed on Y axis Drive Capacities motor rating - Headstock - X / Y axis - Z axis Dimensions / Weight dimensions

mm/min mm/min mm/min mm/min mm/min

890 429 280 0-1300 65-320

890 429 280 0-2600 65-320

kW kW kW

7.5 4 2.2

4000x3000 x2300 5361 362 735

6000x3000 x2300 6200 362 736

weight kg Part No. with position indicator

For more information and optional accessories, visit www.knuth.de

121

M i l l i ng

Gantry-Type Milling Machine

• bed, columns and travel tracks form a solid cast-iron frame structure for high rigidity under hard machining conditions and high table loads • the gantry construction is fully integrated into the machine frame for maximum rigidity • the traverse height is adjustable, ensuring high rigidity even with flat workpieces, since the throat size can be minimized • rigid guides with ground surfaces support the table across the entire travel distance to ensure constant high geometric accuracy • infinitely variable feed on X • large setup area with up to 4000 mm length and 1250 mm width

• this machine type handles work pieces with weights up to 6000 kg • main spindle gears with 6 steps - for vertical and horizontal operation • including weight balancing system for easy movement and precise positioning of the horizontal spindle head • all guideways are protected by telescoping covers or bellows • the control panel is mounted on a long arm, giving the user maximum positioning flexibility • automatic central lubrication is included

2 main spindle heads for competitive manufacturing: • vertical spindle head on height-adjustable traverse can be moved across the entire machining width • easy positioning of the horizontal spindle on the right column guide on Y axis, and via a compact guideway slide 350 mm on the Z axis • 2-sided machining of the workpiece in vertical and horizontal direction with only one setup • both spindle heads swivel ± 35°

Furnished with completely assembled 3-axis position indicator

Standard Equipment: 3-axis position indicator, central lubrication, work lamp, foundation bolts, operating tools, operator manual Options Part No. • machine vise for HNCS 200V 104 936 • machine vise HS 200 125 029 • divider ST 155 110 965 • optional accessory set for ST 155 110 971 • rotary table RTS 320 125 845 • tailstock for RT 320 125 825 • WELDON milling chuck, ISO 50 / 6 mm Ø 106 811 • WELDON milling chuck, ISO 50 / 8 mm Ø 106 812 • WELDON milling chuck, ISO 50 / 10 mm Ø 106 813 For additional options for this machine, visit our website and search for Portamill Duo (product search) Speciﬁcations Portamill Duo Working area X axis travel mm Y axis travel mm Z axis travel mm Working area of horizontal milling spindle Y axis travel mm Z axis travel mm spindle center-to-table distance mm table dimensions mm table load capacity (max.) kg T-slots (qty x width x spacing) mm Vertical spindle spindle nose-to-table distance speed range spindle mount Horizontal spindle spindle mount speed range Feed X axis rapid feed

122

2010

3010

2012

3012

4012

2000 1300 1000

3000 1300 1000

2000 1400 1200

3000 1400 1200

4000 1400 1200

500 350 0 - 500 1000 x 2000 2000 7 x 22 x 125

500 350 0 - 500 1000 x 3000 3000 7 x 22 x 125

500 350 0 - 500 2000 x 1250 3000 7 x 28 x 200

500 350 0 - 500 3000 x 1250 4000 7 x 28 x 200

500 350 0 - 500 4000 x 1250 6000 7 x 28 x 200

0 - 1000 82 - 505 ISO 50

rpm

ISO 50 82 - 505

mm/min

1050

2100

1300

2620

mm rpm

For the latest specials, visit

www.knuth.de

Portamill Duo 2-sided machining in one setup - for high precision across long travel distances and with high workpiece weights

Portamill Duo X axis feed Z axis rapid feed (gantry) Vertical spindle X axis rapid feed Y axis feed Z axis rapid feed Horizontal spindle Y axis rapid feed Y axis feed Z axis rapid feed Drive Capacities motor rating for vertical spindle motor rating for horizontal spindle motor rating X axis motor rating Y / Z axis Dimensions / Weight dimensions (LxWxH) weight Part No. with position indicator

incl. Position Indicator

mm/min mm/min

2010 0 - 1050 432

3010 0 - 2100 432

2012 0 - 1300 432

3012 0 - 2620 432

4012 0 - 2620 432

mm/min mm/min mm/min

890 65, 320, 890 280

mm/min mm/min mm/min

730 50, 265, 730 280

kW kW kW kW

5.5 5.5 4 4

7.5 7.5 5.5 4

7.5 7.5 7.5 4

mm kg

4550 x 3200 x 2700 10292 362 730

7000 x 3200 x 2700 11960 362 731

5000 x 3550 x 3150 12800 362 732

7000 x 3550 x 3150 15849 362 733

9000 x 3550 x 3150 19755 362 734

For more information and optional accessories, visit www.knuth.de

123

M i l l i ng

Gantry-Type Milling Machine

the robust horizontal cutter head features a 7.5 kW drive motor

• machine bed, table and column structure, plus the heavy horizontal cutter head are made of premium cast-iron with heavy ribbing and superior rigidity to guarantee maximum stability even at long travel distances. • the custom machine frame construction supports the table without console directly on the machine bed across the entire travel distance and allows high workpiece weights with unaffected constant accuracy • robust, rigid guideways ensure precision and durability and are supplied with oil by the fully automated central lubrication unit • setup area with up to 3000 mm length and 800 mm width plus a wide throat of at least 750 mm

• infinitely variable automatic linear feed • 6-step headstock gear, easy to shift, with hardened and ground gears and shafts • cutter head swivels 35° on the vertical axis • including telescoping cover on X protect spindle and spindle nut from debris • the control panel is mounted on a long arm to give the user a wide radius of operation

Standard Equipment: 3-axis position indicator, collet chuck, reducing sleeves, combination shell-end milling arbors, work lamp, operator manual Options • machine vise for HNCS 200V • machine vise HS 200 • divider ST 155 • optional accessory set for ST 155 • rotary table RTS 320 Speciﬁcations HBF Working area X axis travel Y axis travel Z axis travel table setup area T-slots (qty x width x dist) spindle center-to-table distance table load capacity (max.) Feed X axis rapid feed Y axis rapid feed Z axis rapid feed feed speed, X axis feed speed, Z axis

124

Part No. 104 936 125 029 110 965 110 971 125 845

• tailstock for RT 320 125 825 • WELDON milling chuck, ISO 50 / 6 mm Ø 106 811 • WELDON milling chuck, ISO 50 / 8 mm Ø 106 812 • WELDON milling chuck, ISO 50 / 10 mm Ø 106 813 For additional options for this machine, visit our website and search for HBF (product search) 206

306

208

308

mm mm mm mm

2000 750 350 2000x630

3000 750 350 3000x630

2000 750 350 2000x800

3000 750 350 3000x800

mm mm kg

5x22x120 0-750 1500

5x22x120 0-750 2000

5x22x160 0-750 1500

5x22x160 0-750 2000

mm/min mm/min mm/min mm/min mm/min

1360 280 1300 0-1360 0-430

1360 280 2100 0-1360 0-430

1360 280 1300 0-1360 0-430

1360 280 2100 0-1360 0-430

For the latest specials, visit

www.knuth.de

HBF Heavy single-column horizontal milling machine with long travels and vertically swivelling head

Furnished with completely assembled 3-axis position indicator

HBF 206 is shown HBF Horizontal Cutter Head speed range spindle mount throat head swivel range Drive Capacities main motor rating motor rating X axis motor rating Y axis motor rating Z axis Dimensions/Weight overall dimensions (LxWxH) weight Part No. with position indicator

206 (6) 82-505 ISO 50 330 ± 35°

306 (6) 82-505 ISO 50 330 ± 35°

208 (6) 82-505 ISO 50 330 ± 35°

308 (6) 82-505 ISO 50 330 ± 35°

kW kW kW kW

7.5 3 2.2 0.4

7.5 4 2.2 0.4

7.5 3 2.2 0.4

7.5 4 2.2 0.4

mm kg

5250 x 1850 x 2150 3593 362 737

6600 x 1850 x 2150 5033 362 738

5250 x 2060 x 2150 3724 362 739

6600 x 2060 x 2150 5516 362 740

rpm mm

For more information and optional accessories, visit www.knuth.de

125

M i l l i ng

Horizontal Milling Machines

including position indicator

• preloaded ball screw with zero backlash for easy and precise feeds • simultaneous axis movement • Turcite-B coated guides • dovetail guide on X axis • square guides on Y and Z axes (only Z axis on UWF 10) • hardened and ground gears, nitrated • swivelling control panel, fully equipped with all operating controls • automatic lubrication • spindle brakes • equipment according to CE

UWF 10 is shown

Specifications set-up area (L x W) mm number of T-slots T-slot width mm T-slot distance mm table travel, longitudinal X mm table vertical travel Z mm transverse travel (milling beam) Y mm head swivel range spindle mount spindle speeds min.-1 feed, longitudinal (infinitely variable)mm/min feed, transverse (infinitely variable) mm/min feed, vertical (infinitely variable) mm/min rapid feed, longitudinal mm/min rapid feed, transverse mm/min rapid feed, vertical mm/min spindle nose-to-table dist. mm throat mm main drive capacity kW axis drive for each axis max. table load capacity kg overall dimensions (LxWxH) mm weight kg Part No. with position indicator

126

UWF 10 1235 x 460 5 18 80 900 450 650 360° ISO 40 (27) 30 - 2050 10 - 1000 10 - 1000 6 - 640 2540 2540 1700 50 - 500 63 - 713 5.5 DC Servo 800 1940 x 2220 x 2115 3000 301 240

UWF 12 B 1635 x 500 5 18 80 1300 450 650 360° ISO 50 (27) 30 - 2050 10 - 1000 10 - 1000 5 - 500 2200 2200 1100 80 - 530 60 - 760 7.5 DC Servo 1800 2140 x 2621 x 1940 3500 301 271

For the latest specials, visit www.knuth.de

UWF 15 B 2000 x 500 5 18 80 1500 500 650 360° ISO 50 (27) 30 - 2050 10 - 1000 10 - 1000 5 - 500 2200 2200 1100 80 - 530 60 - 760 7.5 DC Servo 1800 2140 x 2986 x 1940 5500 301 272

UWF 10 • 12B • 15B • servo drive X, Y, Z • extra large work area Total Price including 3-axis

• extra-large work table and large travel ranges on all axes • sturdy and torsionally rigid construction • universal swivel head – cutter can be moved to any spatial angle • infinitely variable feed speeds and rapid feed with servo motor and motion control on all 3 axes

position indicator (assembled)

UWF 12B is shown including position indicator

Standard Equipment: operating tools, automatic central lubrication, coolant system, operating instructions Options • oscillation element LT 55 (per unit) • hydraulic vise HS 150

Part No. 103 322 125 028

3-axis position indicator, universal swivel head,

• divider ST 155 110 965 • Power Worker chip lift-off device 123 040 • clamping tools, assorted De Luxe 18/M16 105 305

For more information and options, visit

www.knuth.de

127

M i l l i ng

Universal Milling Machine

Cutter head ± 90° with automatic quill feed and 60 mm quill stroke

Universal swivel table (optional)

• ribbed machine stand ensures maximum dynamic rigidity and constant precision • vertical setup table with 5 setup slots allows individual positioning of the sturdy, large work table • micro-tuning (18 steps) of spindle gears to maintain a constant optimum spindle speed • fine adjustments of work feeds and rapid feed on all axes ensure maximum versatility and productivity • the quill can be advanced manually or automatically (3 steps) • very wide hardened guideways ensure constant accuracy • ergonomically arranged controls and a swivelling control panel plus standard digital position indicator for maximum operator comfort • including automatic lubrication system

View: operator side with position indicator Specifications WF 4.2 Working Area travel

- X axis - Y axis - Z axis

table setup area table load capacity (max.) T-slots (qty x width x spacing) Feed rapid feed - X axis - Y axis - Z axis Feed Speed - X axis - Y axis - Z axis quill feeds Vertical Cutter Head spindle speed spindle mount

128

mm mm mm mm kg mm

500 350 400 800 x 400 300 8 x 14 x 45

mm/min mm/min mm/min mm/min mm/min mm/min mm/U

1200 1200 1200 10 - 500 (18) 10 - 500 (18) 10 - 500 (18) 0,03 / 0,06 / 0,12

min-1

40 - 2000 (18) ISO 40

quill stroke throat spindle nose-to-table distance head swivel range Horizontal Cutter Head spindle speed spindle mount spindle axis-to-table distance Drive Capacities main motor rating motor rating for feed coolant pump motor rating Dimensions/Weight overall dimensions (LxWxH) weight Part No.

For the latest specials, visit www.knuth.de

mm mm mm

60 170 - 520 5 - 405 ±90°

min-1 mm

40 - 2000 (18) ISO 40 35 - 435

kW kW kW

3 1,5 0,04

1820 x 1640 x 1710 2300 370 313

Total Price including 3-axis

WF 4.2

position indicator (assembled)

Heavy-duty Universal Tool Milling Machine, for tool and die construction, form and mold construction as well as for training use • high machining quality and maximum reliability • separate feed gears with fine gradation and rapid feeds in all axes • large work table (800 x 400 mm) and travels up to 500 x 350 x 400 mm for maximum versatility • Extensive accessory package included

Standard Equipment: 3-axis position indicator, milling arbors (22, 27 mm), short tool shaft (22, 27 mm), reducing sleeves (MT1, MT2, MT3, MT4), collet chuck set (includes 4, 5, 6, 8, 10, 12, 14, 16 mm), drill chuck (0-6 mm diam.), Ø 1-13mm, chip tray, draw bar, anchor bolts, coolant system, outer arbor support for horizontal milling, work lamp, operating tools, operator manual Options • universal swivel table 630 x 300 mm X / Y axis swivel range: ± 30°, Z axis swivel range: 360° • oscillation element LT 33 (per unit)

Part No.

170 313 103 321

• hydraulic vise HS 125 • divider ST 130 • clamping tools, assorted De Luxe 16 / M14 • combination snap-on punch, Ø27 / SK 40 • milling chuck Weldon ISO 40 / Ø20 mm

For more information and options, visit www.knuth.de

125 024 110 960 105 300 103 905 106 806

129

M i l l i ng

Tool Milling Machine

Doors open up wide for easy access to the work space

Options Universal Knee Universal Reaming Head

Part No. 250 760 250 761

Rotary table Divider

250 762 250 763

Standard Equipment: GPlus 450 control, short tool shank (22, 27 mm), 160 mm vise, reducing sleeves MT1 / MT2 / MT3 / MT4, cutter head clamping assembly, milling chuck with collets (4, 5, 6, 8, 10, 12, 14, 16 mm), chip tray, electronic hand-wheel, draw bar, anchoring bolts, coolant system, outer arbor support for horizontal milling, work lamp, operating tools, operator manual Speciﬁcations WF 4.2 CNC control Working area X axis travel Y axis travel Z axis travel table dimensions table load capacity T-slots (qty x width x spacing) spindle nose-to-table distance throat Headstock speed range spindle mount Feed rapid feed X / Y / Z axis work feed Vertical Cutter Head spindle speed spindle mount

130

GPlus 450 mm mm mm mm kg mm mm mm rpm mm/min mm/min rpm

500 350 400 400 x 800 300 14 x 7 x 50 25 - 425 182 - 532 40 - 4000 ISO40 6000 2 - 3000 4000 ISO 40

quill stroke spindle nose-to-table distance head swivel range Horizontal Cutter Head spindle speed spindle mount spindle axis-to-table distance Accuracy positioning accuracy repeatability Drive Capacities main motor rating motor rating X / Y axis motor rating Z axis Dimensions / Weight dimensions weight Part No.

For the latest specials, visit

www.knuth.de

mm mm

80 25 - 425 ± 90°

rpm

4000 ISO 40 90 - 490 ± 0.022 ± 0.012 7.5 1.3 1.4

mm mm mm kW kW kW mm kg

2900 x 2150 x 2330 2000 101 425

WF 4.2 CNC

cutter head swivels +/-90°

The top model of this successful series – now with CNC control

• rigid, heavily ribbed cast-iron construction ensures excellent damping characteristics • all-around enclosure of work table provides optimum protection from chips and coolant liquids • high speed range (rapid feed up to 6000 mm/ min) and good controllability via a low-maintenance servo-motor • easy operation - optimized for time-saving processes: hydraulic tool clamping is standard equipment

• quill feed at the vertical cutter head allows manual drilling • hardened, plastic-coated guideways ensure long tool life and minimal wear • infinitely variable spindle speeds (40 - 4000 rpm) flexible use for a wide variety of materials and tools • intuitive GPlus 450 control for maximum efficiency and cost-effectiveness

For more information and options, visit www.knuth.de

electronic hand-wheel included in standard equipment

131

M i l l i ng

CNC Tool Milling Machine

easy to read 3-axis position indicator included in price!

18 speeds from 40 to 2000 rpm

powerful main drive motor with 3 kW

Vertical cutter head with 80 mm quill stroke, swivels ±90°

Top slide with max. travel of 400 mm

1,1 kW feed motor Large removable work table with 6 T-slots ensures safe positioning of workpieces Rapid feed 1200 mm/min

WF 4.1 shown

132

For the latest specials, visit www.knuth.de

WF 4.1 • 3.1 • 2.1 Milling Machines for Tool Construction with Digital Position Indicator

extensive standard equipment

• automatic feeds on all 3 axes • outer arbor support for horizontal milling • heavily ribbed cast-iron machine stand ensures maximum static and dynamic rigidity • steamlined arrangement of operating controls on the right side • vertical head quill for drilling, with hand lever feed • quill stroke 80 mm • central lubrication • hardened guideways • chip collector pan

WF 4.1 shown incl. position indicator

For more information and options, visit www.knuth.de

133

M i l l i ng

Tool Milling Machines

B • to use the WF 2.1 for horizontal milling, just rotate the vertical milling head 90° • outer arbor for horizontal milling is included in standard equipment • wide variety of applications

Standard Equipment: position indicator, 4 milling arbors (long - 16, 22, 27, 32 mm), reducing sleeves (MT 1, 2, 3), collet chuck with collets (2, 3,4, 5, 6, 8, 10, 12 mm), draw bar, coolant system, chip collector tray, oscillation elements (WF 3.1 and WF 4.1), outer arbor support for horizontal milling, work lamp, foundation bolts, operating instructions, operating tools

Optional Equipment: universal swivel table for WF4.1 WF3.1 WF2.1 setup area mm swivel around X and Y axis swivel around Z axis Part No.

320 x 620 ± 30° 360° 129 347

WF 2.1 shown

Specifications work space dimensions mm vertical table dimensions mm T-slots, work table mm T-slots, vertical table mm table load capacity kg travels - longitudinal (X) mm - transverse (Y) mm - vertical (Z) mm spindle axis-to-table surface distance - horizontal spindle mm - vertical spindle mm max. throat mm speed range min-1 spindle mount feeds mm/min X, Y, Z axis rapid feed mm/min quill stroke mm main motor rating kW feed motor rating kW dimensions (LxWxH) mm weight kg Part No. w. position indicator

134

WF 2.1 750 x 320 830 x 225 (5) 14 x 63 (2) 14 x 126 160 400 200 380

WF 3.1 750 x 320 830 x 225 (5) 14 x 63 (3) 14 x 63 160 405 305 400

WF 4.1 800 x 400 1060 x 250 (6) 14 x 63 (3) 14 x 63 200 500 400 400

35 - 425 75 - 445 680 (12) 40 - 1600 ISO 40 8 - 310

85 - 485 50 - 450 425 (18) 40 - 2000 ISO 40 10 - 380

50 - 450 50 - 450 540 (18) 40 - 2000 ISO 40 10 - 380

1200 80 2.2 0.75 1170 x 1210 x 1820 1100 302 331

1200 80 2.2 0.75 1215 x 1200 x 1800 1300 302 332

1200 80 3 1.1 1390 x 1430 x 1820 1400 302 333

For the latest specials, visit www.knuth.de

M i l l i ng Horizontal milling with outer arbor support

The WF 4.1 Milling Machine features a vertical cutter head with a +/- 90Âş swivel range. The set degrees are easily read on the integrated degree scale. The large quill features a stroke of 80 mm and is clamped mechanically via lever. For horizontal milling applications, merely remove the vertical cutter head via the swivel arm, shift the upper beam, and mount an outer arbor support.

Universal swivel table (optional)

Conversion and setup costs are very low. All 3 axis of this machine are equipped with automatic feeds and rapid feeds. The X and Y axes are engaged and disengaged via one single directional lever. For the cross feed (Y), a separate lever has been provided at the upper beam. In addition, all axes can be manually moved using the integrated scaled hand-wheels.

infinitely variable vertical cutter head with a swivel range of Âą 90Â°

For more information and options, visit www.knuth.de

135

• This universal cutter head features a 360° swivel and is easy to control for versatile and complex machining of a wide variety of workpieces. 2 swivel levels allow setting of virtually any angle! • robust and proven design – very rigid, heavy machine bed made of premium cast-iron to ensure maximum precision and low vibration • increased operator comfort with large step guard along the entire work table length – easy accessibility to the universal cutter head for easy tooling and unloading of machine when working with large workpieces • robust, specially hardened guideways ensure maximum precision and durability; an automatic central lubrication system minimizes maintenance work • the worktable features are optimized to fulfill the needs of a wide spectrum of applications: large table setup area of 2500 x 575 mm and high table load capacity of 3000 kg • easy and quick change-over from vertical to horizontal alignment of cutter spindle • infinitely variable automatic linear and cross feed • reliable hydraulic clamping on all axes • powerful 11 kW motor for high-capacity machining

Options • Divider F11160A • Rotary table TS 400 • Vise 200 mm • Step blocks, assorted • Divider ST 155 • Option for ST 155 • Rotary table RT 320 • Tailstock for RT 320 • Rotary table RTS 320 • End-face roughing cutters 10-pc • Reducing sleeve ST50 / ST30 • Reducing sleeve ST50 / ST40

Part No. 250 233 250 234 250 235 105 340 110 965 110 971 125 845 125 825 125 815 108 445 103 760 103 770

• • • • • • • • • • • • •

Power Worker chip lift-off device Machine vise HS 200 Machine vise NZM 200 Machine vise HNCS 200 Dial feed for HNCS 200 Milling chuck WELDON ISO 50 Ø 6 mm Milling chuck WELDON ISO 50 Ø 8 mm Milling chuck WELDON ISO 50 Ø 10 mm Milling chuck WELDON ISO 50 Ø 12 mm Milling chuck WELDON ISO 50 Ø 16 mm Milling chuck WELDON ISO 50 Ø 20 mm Milling chuck WELDON ISO 50 Ø 25 mm Milling chuck WELDON ISO 50 Ø 32 mm

123 040 125 029 104 922 104 936 104 937 106 811 106 812 106 813 106 814 106 815 106 816 106 817 106 818

Standard Equipment: 3-axis position indicator, collet chuck ISO 50 with collets (4, 6, 8, 12, 16, 18, 22, 26 mm diam.), reducing sleeve (ISO 50/MT4), coolant system, foundation bolts 11xM24x500, operating tools, operator manual Specifications KB 2500 Working area X axis travel Y axis travel Z axis travel table dimensions table load capacity (max.) T-slots (qty x width x distance)) Feed X axis rapid feed Y axis rapid feed Z axis rapid feed feed speed X axis feed speed Y axis feed speed Z axis cutter head

136

mm mm mm mm kg mm

1800 600 900 2500 x 575 3000 3 x 22 x 152

mm/min mm/min mm/min mm/min mm/min mm/min

3000 3000 1800 20 - 2200 20 - 2200 12 - 1320

speed range spindle mount spindle nose-to-table distance head swivel range Drive Capacities main motor rating feed motor rating coolant pump motor rating Dimensions/Weight dimensions

rpm

40 - 1200 ISO 50

50 - 950 360°

kW kW kW

11 2.9 0.09

weight Part No.

4300 x 3200 x 3300 12000 301 425

For the latest specials, visit www.knuth.de

KB 2500

with hydraulic axis clamping and universal swivel head

The Universal Heavy-Weight with high table load capacity and powerful main spindle drive

incl. position indicator

For more information, visit www.knuth.de

137

M i l l i ng

Bed-Type Milling Machine

This universal cutter head features maximum rigidity and quiet operation. The angle can be set manually on an infinitely adjustable scale from 90º to 45º. This allows an exact adjustment of the headstock in user-defined spatial angles and easy movement to a horizontal position.

Standard Equipment: • 3-axis position indicator • universal swivel head • coolant system

• drawbar • 1 set ISO 50 milling chucks (8-pc. 4, 6, 8, 12, 16, 18, 22, 26 mm)

Optional Equipment • Milling Chuck WELDON ISO 50 / Ø 6 mm • Milling Chuck WELDON ISO 50 / Ø 8 mm • Milling Chuck WELDON ISO 50 / Ø 10 mm • Milling Chuck WELDON ISO 50 / Ø 12 mm • Milling Chuck WELDON ISO 50 / Ø 16 mm • Milling Chuck WELDON ISO 50 / Ø 20 mm • Milling Chuck WELDON ISO 50 / Ø 25 mm • Milling Chuck WELDON ISO 50 / Ø 32 mm • Machine Vise HNCS 160V • Machine Vise HS 150 • Machine Vise MS 160 • Machine Vise NZM 160 • Machine Vise PAL 180 Specifications KB 2100 working area travel X-axis travel Y-axis travel Z-axis table set up area table load capacity (max.) T-slots (number x spacing) Feed rapid feed X- / Y-axis rapid feed Z-axis feed speed X- / Y-Achse Vertical milling head speed range

138

Part-No. 106 811 106 812 106 813 106 814 106 815 106 816 106 817 106 818 104 934 125 028 104 960 104 920 106 022

mm mm mm mm kg

1500 670 0-700 2100 x 500 2000 4 pieces x 20 mm

mm/min mm/min mm/min

3500 1750 20 - 1800

rpm

(12) 40 - 1600

The KB 2100 includes a horizontal cutter arbor holder with excellent rigidity, allowing the user to fully utilize the advantages of a bed-type milling machine design for machining with long cutter arbors.

• • • •

ISO 50 milling arbor Ø 40 mm horizontal arbor holder horizontal milling arbor Ø 32 mm work space lighting

• operating tools • foundation bolts M12 x 500 mm • operator manual

• Coolant Concentrate 5 Ltr. • Pivoted Mounts LK 55 • Power Worker Metal Cutter • Reduction Sleeve SK50 / SK30 • Reduction Sleeve SK50 / SK40 • Rotary Table RT 250 • Tailstock / RT 200/250 • Step of Step Blocks • Universal Indexing Head 200 mm • Universal Indexing Head 250 mm • Universal Indexing Head 320 mm • Roughing End Mill Cutter 63 mm

spindle mount throat vertical spindle-to-table distance milling head swivel range Drive capacities motor rating main drive motor rating feed motor rating coolant pump Measures and weights overall dimensions weight Part No.

For the latest specials, visit www.knuth.de

Part-No. 103 184 103 322 123 040 103 760 103 770 125 840 125 820 105 340 101 288 101 287 101 286 108 402

mm mm

ISO 50 610 0 - 700 360°

kW kW kW

7,5 2 0,55

mm kg

3300 x 2380 x 2750 7300 301 285

KB 2100

extensive standard equipment

Large machine bed, wide column, plus high intrinsic weight - Power package for machining of large parts and heavy-duty chip removal capacity

incl. Position Indicator

• an extremely rigid, large-sized box-column design, made of premium cast-iron, provides a solid base for optimum work results • extra wide box ways ensure maximum stability and precision at high loads • all guideways are hardened and ground for lasting precision • extra long table travel distance (1500 mm) and large table set-

up area (2100 x 500 mm) allow machining of large single parts or interactive machining of several parts - to give you a leading edge over your competition • wide spindle speed range from 40 to 1600 rpm • infinitely variable linear and cross feed • control panel on a long extending arm that can be ideally positioned by the operator

For more information and options, visit www.knuth.de

139

M i l l i ng

Bed-Type Milling Machine

KB 1400 incl. Position Indicator

High-Capacity Bed-Type Milling Machine for large parts and heavy machining Only the cutter head (with the part) – not the machine table – moves on the Z axis. This results in improved stability, less vibration, and ultimately in increased precision and extremely high table load capacity! • infinitely variable speed adjustment provided through frequency drive • rigid, rectangular flat guideways ensure consistent accuracy • Mehanite cast-iron frame • hardened and ground guideways on all axes • cutter head swivels ± 30° • standard 3-axis position indicator

face milling with cutter head Standard Equipment KB 1400: position indicator, collet chuck with collets Ø 4, 5, 6, 8, 10, 12, 14, 16 mm, reducing sleeves MT4, MT3 and MT2, cutter arbor Ø 40, coolant system, work lamp, central lubrication, operating tools, operator manual For available options for this machine, visit our website and search for KB 1400 (Product Search)

Specifications KB 1400 spindle mount vertical spindle nose-to-table dist. throat speeds table size head swivel range travel - X axis - Y axis - Z axis feed speed - X / Y axis - Z axis rapid feed

140

mm mm min-1 mm mm mm mm mm/min mm/min mm/min

ISO 50 150 - 650 510 30-1800 (infinitely var.) 1400 x 400 ± 30° 800 400 500 18 - 627 (9 steps) 18 - 627 1670

T-slots (qty x width x spacing) max. speed of height adjustment quill travel main motor feed motor Z axis motor coolant pump coolant pump flow rate overall dimensions (LxWxH) weight Part No. with position indicator

For the latest specials, visit

www.knuth.de

mm mm/min mm kW kW kW W l/min mm kg

3 x 18 x 100 1670 105 7,5 0,75 0,75 40 12 2290 x 1770 x 2120 3660 301 320

KBH 2000 incl. Position Indicator

Bed-type Milling Machine for concurrent vertical and horizontal milling • machine bed, table, and large rigid column in box-column design are made of high-quality cast-iron with tension-free annealing • extra wide box ways on X and Y ensure maximum rigidity and precision at high table loads • the cutter head is designed for heavy-duty machining and features 2 headstocks for added application flexibility • all gears, shafts, and guideways are hardened and ground • infinitely variable feed on all axes • wide range of spindle speeds across 18 steps from 42 to 1290 rpm

Options for this machine can be found on our website under KBH 2000 (product search) Standard Equipment: 3-axis position indicator, coolant system, central lubrication, draw bar, 1 set ISO 50 milling chucks with collets (4-26 mm), ISO 50 milling arbor (32 mm), work lamp, foundation bolts, operating tools, operator manual Specifications KBH 2000 Working area X axis travel Y axis travel Z axis travel table setup area T-slots (qty x width x spacing) spindle nose-to-table distance Feed rapid feed X / Y / Z axis feed speed X / Y / Z axis Vertical Cutter Head speed range spindle mount

mm mm mm mm mm mm

1500 650 650 2000 x 400 3 x 18 x 100 0 - 600

mm/min mm/min

3500 20 - 2000

rpm

(18) 42 - 1290 ISO 50

throat horizontal milling speed range spindle mount throat Drive Capacities main motor rating feed motor rating coolant pump motor rating Dimensions / Weight dimensions weight Part No. with position indicator

For more information, visit www.knuth.de

450

rpm mm

(18) 42 - 1290 ISO 50 602.5

kW kW kW

7.5 2.8 0.09

mm kg

3000 x 2420 x 2340 4500 301 260

141

M i l l i ng

Bed-Type Milling Machine

Total price including 3-axis

Vertical Milling Machine

position indicator (assembled)

VFM 4 Rugged Knee-and-Column Milling Machine - ideal for single-part production, rework, and repairs • massive machine frame with very rigid knee slide • X and Y axis with automatic feed and rapid feed • Z axis with motorized rapid feed • work table and guides are hardened and ground • extremely rigid cutter head, swivels +/-35° • manual quill feed for boring and micro-feed

Standard Equipment: 3-axis position indicator, milling chuck ISO50 with collets (4, 5, 8, 10, 12, 14, 16 mm), reducing sleeve ISO50/MT4, draw bar, central lubrication, work lamp, operating tools, operator manual Options • machine vise NZM 160 • oscillation element LT 55 (per piece) • coolant concentrate 5 l • Power Worker chip lift-off device Specifications VFM 4 Working area X axis travel Y axis travel Z axis travel table setup area T-slots (qty x width x spacing) throat head swivel range workpiece weight (max.) Feed rapid feed X / Y axis Z axis rapid feed X / Y axis feed speed

142

Part No. 104 920 103 322 103 184 123 040

mm mm mm mm mm mm kg

1000 300 400 1320 x 320 5 x 14 x 63 360 ± 35° 300

mm/min mm/min mm/min

1200 600 (8) 20 - 360

• • • •

milling chuck WELDON ISO 50 / Ø 6 mm milling chuck WELDON ISO 50 / Ø 32 mm clamping tools, assorted, De Luxe 16/M16 reducing sleeve ST50 / ST40

Vertical Cutter Head speed range spindle mount quill stroke vertical spindle-to-table distance Drive Capacities main motor rating feed motor rating coolant pump motor rating Dimensions/Weight overall dimensions (LxWxH) weight Part No. with position indicator

For the latest specials, visit

www.knuth.de

rpm

Part No. 106 813 106 818 105 300 103 770

mm mm

58 - 1710 ISO 50 70 45 - 445

kW kW kW

4 0.55 0.09

mm kg

2220 x 1820 x 1880 2300 301 281

NEW design features larger work space

UWF 4

Superior price/performance ratio, for single part production and training purposes

Standard Equipment: 3-axis position indicator, outer arbor support for horizontal milling, milling chuck set ISO 50 (4, 5, 6, 8, 10, 12, 14, 16 mm), shell-end mill arbor ISO 50/32 mm, adapter sleeve ST 50/ MT4, vertical and horizontal drawbar, coolant system, central lubrication, halogen work lamp, operating tools, test certificate, operator manual

For available options for this machine, visit our website and search for UWF 4 (Product Search)

UWF 4 shown

• including 3-axis position indicator • vertical and horizontal spindles feature their own powerful drives • all gears and shafts are hardened and ground • large, wide, supported table rotates ± 35° • wide rigid, hardened rectangular guideways ensure Specifications Working area X axis travel Y axis travel Z axis travel table dimensions table load capacity (max.) T-slots (qty x width x spacing) Feed rapid feed X / Y / Z axis feed speed, X axis feed speed, Y axis feed speed, Z axis Vertical Cutter Head spindle speed spindle mount

UWF 4 mm mm mm mm kg mm

UWF 4 L

1000 280 / 290

1300 280 325 1320x360 1600x360 250 3 x 14 x 95

mm/min mm/min mm/min mm/min min-1

1290 / 1205 / 513 22 - 420 22 - 393 10 - 168 (12) 60 - 1750 ISO 50

maximum stability • the vertical cutter head swivels on 2 levels allowing virtually any angle setting • automatic feeds and rapid feeds on all axes throat mm spindle nose-to-table distance mm head swivel range Horizontal Cutter Head spindle speed min-1 spindle mount spindle axis-to-table distance mm Drive Capacities motor rating horizontal / vertical spindle kW feed / coolant pump motor rating kW Dimensions / Weight overall dimensions (LxWxH) mm weight Part No.

For the latest specials, visit www.knuth.de

230 - 730 170 - 570 360° (12) 58 - 1800 ISO 50 0 - 400 4 1,1 / 0,09 1980x2020 x1900 2200 362 700

2070x2025 x2020 2480 362 701

143

M i l l i ng

Universal Knee-and-Column Milling Machine

Universal Milling Machine

UFM 3 Plus

extensive standard equipment

Versatile and powerful

Horizontal milling with rigid outer arbor support

Standard Equipment: 3-axis position indicator,1 each horizontal milling arbors (Ø22, Ø27 mm), 2 milling arbors (Ø22, Ø27 mm), collets (5, 6, 8, 10, 12, 14 mm diam.),reducing sleeves (MT2, MT3), draw bar,1 set wrenches, collet puller, foundation bolts M20 x 500 mm, operator manual

For available options for this machine, visit our website and search for UFM 3 Plus (Product Search)

• The Knee-and-Column Milling Machine features a heavily ribbed box-shaped design that will absorb any static and dynamic forces and provides superior rigidity • all controls and indicators are practically arranged • automatic feeds and rapid feeds on all 3 axes • universal cutter head swivels at two levels for vertical/ Specifications UFM 3 Plus table dimensions table load capacity (max.) travel - longitudinal - transverse - vertical - top slide feed - longit., transv. - vertical rapid feed - longit., transv. - vertical number of feeds T-slots

144

mm kg mm mm mm mm mm/min mm/min mm/min mm/min mm

1500 x 300 250 780 235 400 470 17 - 720 4 - 240 2100 700 14 (3) 18

horizontal/angular milling • work table rotates 45° • simultaneous machining of one part with the horizontal and vertical spindle is possible T-slot spacing table rotation horizontal spindle-to-table distance spindle mount spindle speed - horizontal - vertical drive motor rating - horizontal spindle - vertical spindle feed motor dimensions (LxWxH) weight Part no. incl. position indicator

For the latest specials, visit

www.knuth.de

mm mm min-1 min-1 kW kW kW mm kg

70 ± 45° 20 - 420 ISO 40 (12) 35 - 1600 (8) 67 - 1600 4 2.2 0.75 1695 x 1535 x 1728 2850 362 692

Total Price including 3-axis

UWF 3

position indicator (assembled)

Sturdy Universal Milling Machine with swivelling cutter head for universal machining applications

• sturdy, zero-backlash rectangular guideways • universal cutter head with 2 levels can be adjusted to virtually any spheric angle (HURON System) • rapid feeds on all axes allow quick positioning • control panel swivels for comfortable operation • separate drives with gearbox for powerful material removal • large machine table with one 1000 mm X travel

Standard Equipment: 3-axis position indicator, central lubrication, coolant system, work lamp, collet chuck, collets (4, 5, 6, 8, 10, 12, 14, 16 mm), horizontal milling arbor Ø 27 mm and Ø 40 mm, short milling arbor 32mm, operating tools, operator manual

For available options for this machine, visit our website and search for UWF 3 (Product Search) Specifications UWF 3 Working Area travel

- X axis - Y axis - Z axis

table setup area table load capacity (max.) T-slots (qty x width x spacing) Feed rapid feed - X / Y axis - Z axis Feed Speed - X axis - Y axis Vertical Cutter Head spindle speed spindle mount throat spindle nose-to-table distance

mm mm mm mm kg mm

1000 245 450 1320 x 320 260 5 x 14 x 63

mm/min mm/min mm/min mm/min

1200 400 20 - 360 (8) 30 - 360 (8)

min-1

45 - 1660 (11) ISO 40 200 - 760 200 - 650

mm mm

head swivel range Horizontal Cutter Head spindle speed spindle mount horizontal spindle-to-table distance spindle axis-to-table distance Drive Capacities motor rating for horizontal spindle motor rating for vertical spindle motor rating for feed motor rating for Z axis feed coolant pump motor rating Dimensions/Weight dimensions weight Part No.

For the latest specials, visit www.knuth.de

360° min-1 mm mm

40 - 1300 (12) ISO40 20 - 470 200 - 650

kW kW kW kW kW

3 3 0,55 0,75 0,09

2020 x 1710 x 1994 2000 370 297

145

M i l l i ng

Universal Milling Machine

Universal Milling Machine with Universal Swivel Head

UWF 1 Solid engineering, rigid construction, and exacting performance • extra large work table • excellent priceperformance ratio • universal cutter head adjusts to any spatial angle

incl. position indicator

horizontal cutter (standard equipment)

cutter head swivels ± 360° For available options for this machine, visit our website and search for UWF 1 (Product Search) Specifications UWF 1 Work Area X axis travel Y axis travel Z axis travel table setup area table load capacity T-slots (number/width/distance) Feeds feed speed, X axis rapid feed, X axis Vertical Cutter Head spindle speeds spindle mount

146

Standard Equipment: position indicator, outer arbor support for horizontal milling, cutter chuck with 4, 5, 6, 8, 10, 12, 14, 16 mm collets, machine long cutter arbor Ø 32 mm, coolant system, halogen work lamp, operator manual

mm mm mm mm kg mm

600 270 400 1120 x 260 250 3 - 14 - 63

mm/min mm/min

(8) 24 - 720 720

rpm

45 - 1660 ISO 40

throat vertical spindle-to-table surface distance head swivel range Horizontal Cutter Head spindle speeds spindle mount Drive Capacities main motor rating Dimensions / Weight dimensions (LxWxH) weight Part No. incl. position indicator

For more information, visit www.knuth.de

mm mm

60 - 500 0 - 440 360°

rpm

45 - 1600 ISO 40

2,2

mm kg

1660x1500x1730 1300 362 691

VHF 3

incl. position indicator

Solid Universal Milling Machine for drilling and milling work requiring long travel distances • all 3 axes with automatic feed and rapid feeds • vertical head swivels ±45° • spindle speeds for horizontal and vertical spindle controlled by separate switch gears with oil-bath lubrication • capstan-controlled quill feed for drilling, manual micro-feed for milling • 3 automatic quill feeds • for horizontal spindle operations, the top beam including head can be completely rotated on the stand • adjustable ground dovetail guideways on the X axis, and wide square guideways on Y and Z axis • clamping on all 3 axes • adjustable stops for drilling depth and table adjustment

Standard Equipment: position indicator, drilling chuck Ø 16 mm, milling chuck ISO 40, collet chuck ISO 40 incl. collets ( Ø 4, 5, 6, 8, 10, 12, 14, 16 mm), reducing sleeve ISO 40 / MT3 and ISO 40 / MT2, coolant system, chip tray, work lamp, operating tools, operator manual For available options for this machine, visit our website and search for VHF 3 (Product Search)

Specifications VHF 3 work table table set-up area T-slots (quantity / width / distance) table load capacity feeds travel - X axis - Y axis - Z axis feed speeds X axis (from - to / number) feed speeds Y axis rapid feed - X axis - Y axis - Z axis vertical cutter head spindle mount spindle speeds (from - to / number) quill stroke

mm mm kg

1320 x 320 5 / 14 / 50 300

mm mm mm mm/min mm/min mm/min mm/min mm/min

750 280 430 20 - 360 / 8 20 - 360 / 8 1024 1024 670

min-1 mm

ISO 40 90 - 2000 / 8 120

quill feeds (3) throat vertical spindle-to-table distance head swivel range horizontal cutter head spindle mount spindle speeds (from - to / number) spindle axis (horizontal) to table distance drive rating drive motors (vertical / horizontal) feed motor coolant pump dimensions and weight dimensions (LxWxH) machine weight Part No. incl. position indicator

For the latest specials, visit www.knuth.de

mm/rev mm mm

0.08; 0.15; 0.25 200 - 540 140 - 540 ±45°

min-1

ISO 40 38 - 1310 / 12

50 - 450

kW kW kW

2,2 / 2,2 0.55 0.09

mm kg

1710x1720x2330 1800 301 410

147

M i l l i ng

Universal Milling Machine

VHF 1 Flexible Entry-Level Machine - a very compact horizontal/vertical Drill Press/Milling Machine Combination

incl. position indicator

• compact, easy to handle universal milling machine with rigid frame made of vibrationdampening cast-iron • vertical cutter head with robust gears for smooth shifting • quill moves via capstan handle or manual precision feed • horizontal spindle speed adjustable via easy accessible belt drive • table swivels horizontally • table feed in X direction with gear drive for positive power transmission without loss of torque • adjustable stops on all axes • wide, adjustable dovetail guides with clamping fixtures on all axes

Vertical head with horizontal swivel to both sides, top beam with horizontal swivel

Specifications max. drilling capacity in steel max. cutting diameter in steel tapping up to counter-boring up to spindle taper spindle speeds (vertical) speed range spindle speeds (horizontal) speed range throat (spindle center to frame) spindle nose-to-table dist. spindle nose-to-table distance

148

mm mm mm

min.-1 min.-1 mm mm mm

VHF 1 30 25 M 16 100 ISO 40 8 115 - 1750 9 60 - 1350 200 - 700 65 - 385 0 - 300

VHF 2 30 25 M16 100 ISO 40 8 115 - 1750 12 40 - 1300 160 - 610 90 - 400 0 - 300

table setup area X travel Y travel Z travel quill stroke motor (vertical) motor (horizontal) overall dimensions (LxWxH)

mm mm mm mm mm kW kW mm

weight kg Part No. with position indicator

For the latest specials, visit www.knuth.de

1000 x 240 585 185 280 120 1.5 2.2 1290 x 1220 x 2100 850 362 640

1120 x 280 600 270 300 120 1.5 2.2 1710 x 1480 x 2100 1400 362 650

VHF 2 VHF - ideal series for mechanic workshops, training, single part and replacement part manufacturing, and prototyping

incl. position indicator

This excellent price/performance ratio is made possible by high-volume production with standardized VHF assemblies • height adjustment of the work table via automatic feed - precision feed via smooth hand crank • all 3 axes are provided with clamping fixtures • the vertical head swivels to both sides (± 90°), the quill is fed via capstan handle or manual precision feed (hand wheel) • the integrated feed (standard equipment) allows moving of the X axis by hand wheel or via feed • for horizontal machining, the top beam including the head can be rotated by ± 180° on the column, the spindle speed is changed via gears

Standard Equipment VHF 1 and VHF 2: 3-axis position indicator, 2 milling arbors (Ø22, Ø27 mm), collet set - 4 to 16 mm with mount, drill chuck 16 mm, milling chuck ISO 40, reducing sleeve ISO 40 / MT3, reducing sleeve ISO 40 / MT2, work lamp, operating tools, coolant system For available options for this machine, visit our website and search for VHF 1, VHF 2 (Product Search)

wide, adjustable guides

feed gears with rapid feed

upper beam swivels

For more information, visit www.knuth.de

149

M i l l i ng

Universal Milling Machine

Multi-Purpose Milling Machine

MF 5 VP all the benefits of the MF 1 V plus:

inﬁnitely variable spindle speeds up to 3600 rpm

• more rigid and more powerful with 3.75 kW motor • ISO 40 spindle • 3 automatic drill feeds • manual coarse feed for quill, toggles to micro-feed • quill with micrometer depth stop • reverse switch for forward and reverse operation • spindle brakes • wide square guides in y and z axis • infinitely variable speeds • head swivels ± 90° to the right and to the left • TV 1000 table feed in x and y, infinitely variable with rapid feed • coolant system • chip tray • central lubrication • pneumatic tool clamping • optional preloaded ball screw for X and Y axis

incl. position indicator

table feed for X and Y axes (standard equipm.) Options • oscillation element LT 55 (per unit) • hydraulic vise HS 125 • divider ST 130 • milling chuck set ISO 40 • clamping tools, assorted De Luxe 16 / M14 Specifications MF 5 VP table size travel X, Y, Z axis quill spindle taper quill feeds (3 steps) speed range infinitely variable spindle motor max. table load cap.

150

Part No. 103 322 125 024 110 960 106 044 105 300

mm mm mm

Standard Equipment: 3-axis position indicator, table feed TV 1000 in X- and Y-axis, pneumatic tool clamping, chip tray, coolant system, manually operated central lubrication, horizontal guideway cover, operating tools, operator manual

mm/r

1370 x 250 800 x 390 x 380 127 ISO 40 0.04 / 0.08 / 0.15

min-1 V / kW kg

70 - 3600 400 / 3,75 350

weight

dimensions (LxWxH) mm MF 5 VP Part No. with position indicator

1590 2540 x 2156 x 2235 301 235

MF 5 VKP Part No. with position indicator plus preloaded ball screw

301 236

For more information and options, visit www.knuth.de

MF 1

milli used ld y l e d i or ost w in the w m e e h ing •t yp lamp ine t c h l c o a m tic to uma • pne ed d inclu

incl. Position Indicator

MF 1 P • speed (rpm) changed by v-belt shift

Multipurpose Milling Machine for workshops, single part production, construction and training • head swivels around 3 axes swivel angle right + l ± 90° tilt angle forward and back ± 45° turning on column ± 45° • dovetail guides, hardened, adjustable • 3 automatic drill feeds • manual coarse feed for quill, easy changeover to manual precision feed via hand-wheel • quill with automatic micrometer depth stop • spindle mount ISO 30 • FWD/REV toggle switch • central lubrication for spindle, nut, and guides • manual spindle brakes • pneumatic tool clamping • 3-axis position indicator • coolant system

MF 1 VP models • infinitely variable speed via hand-wheel • larger table with larger travel on X • automatic table feed in X direction (TV 1000)

MF 1 VP is shown

MF 1 VKP with preloaded ball screw and position indicator • preloaded ball screws on X and Y axis

Standard Equipment: 3-axis position indicator, pneumatic workpiece clamping, coolant system, central lubrication (manually operated), vertical guideway cover, operating tools, operator manual

Part No. 301 231 Specifications table size X / Y axis travel console travel (Z axis) quill travel (Z axis) spindle mount quill feeds linear table feed (TV 1000)

mm mm mm mm mm/ rev mm/ min

MF 1 P 1060 x 230 670 / 290 370 127 ISO 30 (3) 0.04; 0.08; 0.15 -

MF 1 VP 1245 x 230 760 / 290 370 127 ISO 30 (3) 0.04; 0.08; 0.13 19-890 infinitely

T-slot width / distance speeds

mm rpm

3x16 / 63.5 (16) 80 - 4500

throat main motor rating overall dimensions (LxWxH)

mm kW mm

171 - 476 2.2 2000 x 1600 x 2088 1100 301 232

weight kg Part No. with position indicator

3x16 / 63.5 70 - 3600, inf. variable 171 - 476 2.25 2045 x 1630 x 2070 950 301 230

variable rapid feed

For more information and options, visit www.knuth.de

151

M i l l i ng

Multipurpose Milling Machine

Drill Press/Milling Machine

KBF 50

Total Price including 3-axis position indicator (assembled)

for drilling, milling, tapping, reaming, and universal use in mechanical engineering, training and construction • machine head runs in sturdy dovetail guide • motorized machine head positioning • automatic quill feed (3 steps) • manual quill feed for drilling and fine feed for milling • multi-step gear for maximum drilling and milling capacity • large compound sliding table on rigid guideways • automatic table feed, X and Y axis

Standard Equipment: 3-axis position indicator, solid cast-iron base, coolant system, central lubrication, vertical guideway cover, operating tools,work lamp, operating instructions, collet chuck set, drill chuck, tool mounts

Options Part No. • accessory set, ISO 40, 5 pieces 104 596 • hydraulic vise HS 125 125 024 • divider ST 130 110 960 • milling chuck set ISO 40 106 044 • clamping tools, assorted deluxe 16 / M14 105 300 Additional Options for this machine are listed on our website under KBF 50 (product search) Specifications KBF 50 max. drilling capacity spindle taper quill stroke travel spindle nose to table spindle speed feeds (3) table working surface

152

mm mm mm min-1 mm/r mm

Ø 50 ST 37 ISO 40 180 120 - 620 (16) 94 - 2256 0.1, 0.15, 0.3 1220 x 360

T-slots (3) travels table power feed (8) spindle drive motor dimensions (L x W x H) weight Part No. incl. position indicator

For more information, visit www.knuth.de

mm mm mm/min. V / kW mm kg

14 x 95 X = 600, Y = 360 24 - 720 400 / 1,5/2,4 1730 x 1730 x 2300 1400 362 410

KBF 50 C 50 mm combined drilling capacity with excellent milling characteristics • solid cast-iron frame with long box-column and wide guideways provide an excellent base for powerful machining • cutter head with 45° swivel and motorized positioning on Z axis • 12-step headstock gear provides a wide speed range from 38 to 1730 rpm with large display • automatic quill feed with electromagnetic clutch and 3 gear steps • automatic shut-off when reaching a preset depth, can be used as manual drilling depth limit • quill travel is easy to read on a digital depth indicator with 0.01 mm scale increments • large compound sliding table with adjustable guideways • infinitely variable table feed on X axis • work lamp, coolant system and central lubrication are standard equipment • positioning indicator on X / Y / Z axis

incl. Position Indicator

For available options for this machine, visit our website and search for UWF KBF 50 C (product search) Standard Equipment: 3-axis position indicator, drill chuck 3 - 16 mm Ø, reducing sleeve, coolant system, central lubrication, work lamp, draw bolt, operator manual Speciﬁcations KBF 50 C Working area X axis travel Y axis travel Z axis travel table setup area table dimensions T-slots (qty x width x spacing) max. drilling diameter in steel max. milling diameter in steel tapping capacity in steel counter-boring capacity Vertical Cutter Head spindle speed spindle mount

mm mm mm mm mm mm mm mm mm mm

500 350 420 300 x 800 350 x 1000 3 x 14 x 100 40 25 35 50

rpm

(12) 38 - 1730 MT 4

quill stroke quill diameter spindle nose-to-table dist. throat (spindle center to frame) Swivel range Drive Capacities main motor rating power supply Dimensions / Weight overall dimensions (LxWxH) weight Part No. with position indicator

For the latest specials, visit

www.knuth.de

mm mm mm mm

200 80 180 - 600 360 ± 45°

kW V

2.2 / 2.8 380

1550 x 1580 x 2210 1300 362 430

153

M i l l i ng

Drill Press/Milling Machine

High-Speed Planer

SH 350 Proven in production, tool making, and training workshops – robust, reliable and precise • heavy cast-iron frame in a proven design • reliable multi-disk clutch with oil-bath lubrication • automatic table feed with 4 speed levels • swiveling tool holder head • machine vise with rotating disk is included • central lubrication is standard equipment

Standard Equipment: vise with rotating disk, central lubrication, operating tools, operator manual Speciﬁcations SH 350 Working area stroke length stroke rate stroke speed table size horizontal table adjustment vertical table adjustment automatic table feeds ram-to-table distance (max.)

154

mm m/min rpm mm mm mm quantity mm/stroke mm

350 4 (max. 25) 32 - 125 350 x 300 400 270 4 0.18 - 0.84 330

vertical travel of tool holder vise capacity (opening) drive capacity motor rating Dimensions/Weight overall dimensions (LxWxH) weight Part No.

For the latest specials, visit www.knuth.de

mm mm

110 200

1.5

1430 x 800 x 1200 550 162 700

SBF 32 • 40 Universal Skill Package for the Shop Floor Drilling, Thread cutting, and Milling Drilling and Milling - a true added value for a low price • both machines feature a large compound sliding table for coordinate drilling and milling work • quiet operation with oil-bath lubricated gears for long tool life and durability • the milling machine's high-quality spindle bearing can withstand higher loads for the long term • manual drill feed can be switched to high-precision feed via a hand-wheel • the SBF 40 also features a controllable automatic feed with 3 gear steps • adjustable height of gear head and table • table guides are adjustable with high precision via taper gibs • gear head swivels to both sides • cutter mounts are secured by an M16 drawbar • thread cutter included • the SBF 40 features an integrated coolant system

cutter head swivels to both sides

height-adjustable work table

Specifications Working area travel - X axis mm - Y axis mm - Z1 / Z2 axis mm feed mm/min rapid feed mm/min table setup area mm table load capacity (max.) kg T-slots (number/width/spacing) mm T-slot foot (number/width/spacing) mm spindle speeds (12) rpm spindle mount quill stroke mm throat mm column diameter mm spindle nose-to-table distance mm spindle nose-to-foot distance mm drilling capacity in steel / ST37 mm head swivel range thread cutting in steel / St 37

SBF 32

SBF 40

370 190 260 0-420 600 710 x 210 100 3 x 14 x 50 2 x 14 x 200 75 - 3200 MT 4 120 270 115 510 1180 32 ± 45° M16

500 190 580 0-420 600 730 x 210 100 3 x 14x 70 2 x 25 x 125 75 - 3200 MT 4 120 278 115 600 1180 40 ± 45° M16

SBF 32 shown

Standard Equipment: thread cutter, table feed TV 1000, draw bar, drill chuck, tool-holder bits, coolant system, operating instructions

Drive Capacities main motor rating coolant system Dimensions / Weight overall dimensions (L x W x H) weight Part No.

For the latest specials, visit

www.knuth.de

kW kW

1.1 0.04

1.1 / 1.5 0.04

880 x 750 x 1700 350 101 572

830 x 760 x 1850 390 101 573

155

M i l l i ng

Column Drill Press with Milling Function

Examples of Applications:

inside diameter boring and facing

milling with milling arbor

slot cutting with divider

Standard Equipment: • 3-axis position indicator • base • TV 100 table feed • drill chuck 13 mm • tool holder bits • operating tools Options • ER 32 collet chuck • ER 32 collet set • NZM 125 machine vise • Assorted chucks • Accessories set MT 4

Part No. 106 058 106 052 104 918 105 295 104 594

F F H H H

For available options for this machine, visit our website and search for Mark Super S (Product Search)

angle boring

tapping

Specifications Mark Super S Operating Range head elevation spindle column work table x-way y-way speeds spindle nose-to-table distance (max.) Head + Column spindle mount quill elevation quill diameter head swivel column-Ø / width drilling capacity end milling motor dimension (LxWxH) weight Part No. with position indicator

156

For the latest specials, visit www.knuth.de

F mm mm mm mm mm min-1 mm

mm mm mm mm mm kW/V mm kg

320 260 800 x 240 560 200 (12) 75 - 3200 530 MT 4 120 75 ± 45° 190 32 28 1,1 / 400 990 x 900 x 2100 380 301 498

M i l l i ng

Drill Press / Milling Machine

Mark Super S Cutter head with variable angle, plus large travel ranges ensure maximum versatility

Motor for automatic height adjustment

Dovetail guide

automatic feed with 3-step gears

Manual micro-feed for milling Head swivels ± 45°

Digital depth indicator for quill (LCD display) standard

incl. Position Indicator

The machine head height is adjusted by dovetail guide and lift motor with spindle to provide precise travel. This results in a significantly improved stability during milling operations compared to column-guided systems.

Base including storage shelf

• the integrated tapping feature automatically changes directions upon reaching the preset depth • rigid, and safety-oriented structure of all operation groups, manufactured with maximum precision • the enclosed design of all operation and drive train elements prevents contamination, and ensures troublefree operation

For more information, visit www.knuth.de

157

158

For the latest specials, visit

www.knuth.de

Specifications spindle diameter spindle taper spindle feed facing slide feed facing slide rotation, 18 steps max. table load capacity max. spindle axial thrust spindle center-to-table distance drilling capacity spindle speeds speed range facing slide speed (rpm)

rpm

mm mm rpm kg N mm mm

BO 110 110 ISO 50 600 180 4 - 200 2500 12250 0 - 900 50 22 8 - 1000 18

BO 130 130 ISO 50 900 250 2.5 - 125 10000 31360 0 - 1800 60 24 4 - 800 18

standard digital position indicator in 3 axes on all machines

BO 110 shown

speed range rpm 4 - 200 2.5 - 125 Feed for quill, headstock, and table/spindle rotation range I @ 8 - 400 rpm mm/rev 18 (0.04 - 6) range II @ 500 - 1000 rpm mm/rev 18 (0.01 - 1.53) Feed of facing slide, headstock, and table, facing slide rotation range I - 18 steps mm/rev 0.08 - 12 0.08 - 12 max. spindle torque Nm 1225 3136 max. lathe chuck torque Nm 1960 4900 travel travel - longit./transv. mm 1100/900 2000/2000 vertical head travel mm 900 1800 table setup area mm 1000x960 1600x1800 rapid feed, headstock m/min 2.5 2.,5

BO 110 • BO 130

Horizontal Drill / Milling Unit

rpm kW kW kW kW mm μm mm kg

rotary table rotational speed main motor rating rapid feed motor hydraulic pump spindle stroke motor read-out accuracy, optic counter-bore accuracy overall dimensions (LxWxH) weight Part No. with position indicator

1 7.5 3 0.75 4 0.01 H7 Ra-1.6 4880x2454 x2749 11500 301 499

1,2 15 5.5 1.5 5.5 0.005 H7 Ra-1.6 7030x4660 x3800 29300 399 022

For available options for this machine, visit our website and search for BO 110 / BO 130 (Product Search)

Standard Equipment: 3-axis position indicator, alignment wedges, central lubrication, work lamp, foundation bolts, operating tools, operator manual

• rigid, hardened and precision ground square guides ensure many years of accurate operation • mechanical functions that may not be run simultaneously are provided with interlocks • headstock and feed gears are equipped with an overload clutch • lever-operated shift gears for positioning of the wheels in the desired position • the manual control panel is set up user-friendly and clearly, the panel includes controls for spindle rotation, tool clamping, scale lighting, etc. • table rotates 360° • telescoping steel covers protect the guides from chips and contamination • with variable frequency drive, plus 3-axis servo motor • tailstock included (BO 110), optional (BO 130)

Table load capacity up to 10 tons and a Working Area up to 2,000 x 2,000 mm speak for themselves!

R 32 Basic Rigid Radial Drill Press with an unbeatable price/ performance ratio • for drilling, reaming and tapping • machine frame made of high-quality fine-grain cast-iron with heavy ribbing to ensure maximum reduction of vibrations • precision-ground gears for quiet operation

• practical layout of electrical and mechanical controls at the headstock for easy operation • motorized arm height adjustment • the spindle is made of high-quality hardened steel for consistent accuracy • mechanical clamping for head, column, and arm Specifications R 32 Basic drilling capacity (steel / cast-iron) column diameter throat (spindel-to-column surface) max. throat (spindel-to-column surface) min. spindle nose-to-table dist. max. spindle nose-to-table dist. min. cube table dimensions (LxWxH) machine table dimensions (LxWxH)

mm mm mm mm mm mm mm mm

Standard Equipment: coolant system, cube table, halogen work lamp For available options for this machine, please visit our website and search for R 32 Basic (Product Search)

32 200 820 320 860 320 400 x 400 x 350 1370 x 700 x160

spindle mount quill stroke speeds (quantity/range) feeds (quantity/range) motor rating weight (approximate) overall dimensions (LxWxH) Part No.

For the latest specials, visit www.knuth.de

mm rpm mm/rev kW kg mm

MT 4 240 (6) 75-1220 (3) 0.1-0.25 1.5 1425 1407 x 720 x 1885 101 522

159

Dr i l l i ng

Radial Drill Press

R 40 V - new design • inﬁnitely variable speed control • larger work area

R 40 V

R 60 V • R 80 V

• 40 mm boring capacity, large throat and optimum machining height • infinitely variable speed control with back gearing for high torque across the entire speed range • 4-step feed gears • the boom can be moved vertically, while column and head remain clamped and fixed in their positions • the drill head can be moved radially and positioned with high precision via a centrally located hand-wheel • a clamping lever at the drill head allows the operator to preselect, if the boom should be released for swiveling, whereby both axes will be simultaneously fixed in the requested position above the drill head clamping lever • manual central lubrication

• Optimum size/performance ratio and a new drive technology make these two systems bestsellers • infinitely variable spindle speed and easy to read digital display • the quills of the R 60 V and R 80 V feature guided counterweights for easy handling and increased safety • manually shiftable feed gears with 8 steps • independent hydraulic clamping: boom can be moved vertically without affecting the spindleto-bore alignment • drill head and column can be clamped/released together or separately with the push of a button • a central lubrication system ensures reliable lubrication of the column

Standard Equipment for R 40 V • R 60 V • R 80 V • R 100: coolant system, cube table, halogen work lamp, operator manual

Options R 40 V • R 60 V • R 80 V • R 100 • reducing sleeve MT 5/2 • reducing sleeve MT 5/3 • reducing sleeve MT 5/4 • accessory set, MT 4 (8 pieces)

160

For the latest specials, visit www.knuth.de

Part No. 103 835 103 840 103 845 104 594

R 40 V • R 60 V • R 80 V • R 100 KNUTH Radial Drill Presses - perfect in every detail, powerful, rigid and easy to handle

R 60 V is shown

• base, column, boom and gear head are made of premium high-quality cast • major design features include a large column and a highly torsion-resistant boom • boom height adjustment via a powerful motorized drive and vertical spindle • the boom lifting gears run in an oil-bath for maximum reliability and minimum wear • advanced column swivel design with optimized clamping features maximum rigidity and minimum clamping offset

• swivel axis and travel axis feature extremely smooth operation to make the operator's everyday production work easier • the gears feature hardened and precision-ground chromenickel steel gears for smooth and low-noise operation • all gear parts are lubricated reliably via oil pump • the main spindle runs on precision bearings and features an automatic spindle brake

For more information, please visit www.knuth.de

161

Dr i l l i ng

Radial Drill Presses

depth stop with Nonius

powerful machining with automatic feed

R 100 • a large throat and high boring capacities are supported by a very rigid structural design, without compromising the ease of handling and smoothness of operation • the drill head features a rigid design with motorized or manual movement • spindle speeds and feed velocity are hydraulically controlled for easy and safe operation • the drill spindle is driven by a multi-disk reversing clutch to avoid excessive load peaks; easy operation • independent hydraulic clamping of head, column and boom • drill head and column can be clamped/released together or separately; controlled via push button • boom and column are oiled through a reliable central lubrication system

Speciﬁcations drilling capacity in steel tapping capacity (steel / casting) drilling depth Working area dimensions, machine table dimensions, cube table spindle-to-column surface distance spindle nose-to-table distance drill head travel (horizontal) arm stroke (vertical) Headstock speed range spindle mount Feed feeds Drive Capacities main motor rating lift motor Dimensions / Weight overall dimensions (LxWxH) weight Part No.

162

R 40 V 40 M 32 / M 40 260

R 60 V 62 M 46 / M 52 315

R 80 V 80 M 52 / M 60 400

R 100 100 M 70 / M 80 500

mm mm mm mm mm mm

2050 x 920 x 180 450 x 630 x 450 300 - 1300 300 - 1200 1000 640

2400 x 1000 x 200 500 x 710 x 500 350 - 1600 350 - 1250 1250 585

3400 x 1250 x 280 580 x 850 x 500 450 - 2550 400 - 1620 2100 820

2750 x 1220 x 300 1000 x 800 x 560 570 - 3150 750 - 2500 2580 1000

rpm

54 - 2150 MT 4

38 - 2000 MT 5

30 - 1400 MT 6

8 - 1000 MT 6

mm/rev

0.1 - 0.63

0.06 - 1.00

0.06 - 1.38

0.06 - 3.2

kW kW

2.2 1.1

4 1.5

7.5 2.2

15 3

mm kg

2070 x 850 x 2430 2300 101 556

2490 x 1050 x 2780 3800 101 649

3590 x 1250 x 3530 7400 101 558

4780 x 1630 x 4720 20000 101 653

For the latest specials, visit www.knuth.de

R 40 V • R 60 V • R 80 V • R 100 Proven performance, quality and cost-effectiveness

R 100 is shown

• quill teeth are precision-ground for a smooth feed and minimum wear • the drill head moves on hardened and ground guideways • all models feature adjustable overload clutches in the feeds • adjustable boring depth stop with large, easy to read scale and Nonius

• all operator controls are placed within reach for convenient and practical handling and quick learning • powerful coolant system with coolant reservoir integrated into the machine foot

For more information, please visit www.knuth.de

163

Dr i l l i ng

Radial Drill Presses

Quick-Action Radial Drill Press

KSR 40 Basic Convincing price/performance ratio • modern machine frame design with thick-walled column • top beam with smooth linear guides for quick and accurate positioning of the drill head • 360° rotating column and long vertical travel of top beam allow machining outside the work table boundaries • easy shifting of 12-gear transmission and a powerful drive motor ensure high torque in every speed range • the transmission features hardened and ground shafts and gears • digital speed indicator with large display • drill head swivels ± 90° and its vertical movement is motorized via the column • automatic quill feed (3 steps) is enabled via an electromagnetic clutch and shuts off automatically upon reaching the preset depth • tapping unit with automatic reversal of rotation that is activated upon reaching the preset depth

Standard Equipment: digital speed indicator, additional setup area on the side and rear, swiveling horizontal table, digital drilling depth indicator, halogen work lamp, coolant system, thread cutter, drill chuck and tool-holder bits, reducing sleeves, operating tools, operator manual

Specifications KSR 40 Basic max. drill capacity max. tapping capacity throat max. spindle nose-to-table dist. upper beam travel column stroke quill stroke head swivel range spindle mount spindle speeds, infinitely variable

164

mm mm mm mm mm mm

rpm

Ø 40 M30 950 730 590 380 200 ± 90° MT 4 50 - 315, 315 - 2000

For available options for this machine, visit our website and search for KSR 40 Basic (product search) spindle feeds (number of) column diameter table setup area (L x W) T-slots (qty x width) main motor motor for height adjustment coolant pump motor overall dimensions (LxWxH) weight Part No.

For the latest specials, visit

www.knuth.de

mm/rev mm mm mm kW / V kW / V kW / V mm kg

0.08 - 0.5 (6) Ø 220 1200 x 505 3 / 18 2.2 / 400 1.5 / 400 0.37 / 400 1720x1200x2250 2740 162 380

KSR 40 Advance Linear guides for flexible handling and maximum rigidity

infinitely variable spindle speed with digital display and digital drilling depth indicator for maximum operator comfort

• large travel ranges and many different machining stations provide maximum setup and machining possibilities • powerful machine for drilling, tapping, countersinking and boring • extremely sturdy construction ensures high accuracy and reliability • quick and precise tool positioning: hydraulic clamping is released by the push of a button, head easily swivels forward, backward and horizontally • motorized up and down movement of drill head • height can be adjusted without changing the drilling position • provides great flexibility when machining large parts • drill head swivels ± 90 degrees • autom. feed with depth stop trigger • thick-walled column and large dimensions of all components ensure maximum accuracy • digital drilling depth indicator

Optional Compound Sliding Table Optional Milling Chuck with Collets

Optional Equipment: Compound Sliding Table with Milling Chuck Set Compound Sliding Table table size mm 640x205 cross travel mm 370 linear travel mm 150

dimensions mm 238x320 weight kg 238 Milling Chuck with Collets collet diameter mm 6, 8, 10, 12, 14, 16 Part No. 162 364

Specifications KSR 40 Advance max. drilling capacity mm max. tapping capacity distance (spindle-to-column) mm max. dist. (spindle nose-to-table) mm upper beam travel mm column stroke mm quill stroke mm head swivel range spindle mount spindle speeds, inf. variable rpm

Ø 40 M30 950 780 590 380 200 ± 90° MT 4 50 - 315, 315 - 2000

Standard Equipment: digital speed indicator, additional setup areas at the side and rear, cube table, swivelling horizontal table, digital boring depth indicator, halogen work lamp, coolant system, tapping option, drill chuck with tool-holder bits, reducing sleeves, operating tools, operator manual spindle feeds (quantity) column diameter table setup area (LxW) T-slots, qty x width (table) main motor height adjustment motor coolant pump motor dimensions (LxWxH) weight Part no.

mm/rev mm mm mm kW/V kW/V kW/V mm kg

For more information and options, visit www.knuth.de

0.08 - 0.5 (6) Ø 220 1200 x 505 3 / 18 2.2 / 400 1.5 / 400 0.37 / 400 1720x1200x2250 2740 162 363

165

Dr i l l i ng

High-Speed Radial Drill Press

Tapping machine

GTB 1200 Tapping with wide radius of action This Radial Drill Press for threadcutting features the highest rigidity in its class. Large and very heavy parts can easily be machined next to the machine setup table even horizontally!

Table surface raised to 600 mm

Standard Equipment: base frame, operating tools, operator manual

• innovative articulating arm system provides maximum flexibility • optimum structure for rapid positioning and guaranteed rigidity and precision during machining • very practical workflow - eliminates extensive movements and repeated fixation of workpieces • drill head swivels - angle setting is indicated on a large scale for easy readability Speciﬁcations GTB 1200 thread cutting capacity steel / casting Working area thread cutting depth (max.) throat (min.) throat (max.) T-slots (qty x width x spacing) arm swivels spindle mount

166

27 / 32 mm mm mm mm mm

150 200 1200 3 x 18 x 100 360° diam. 27

Options

Part No.

• UMS 140 Vise • Quick-action Vise M6 - M30 • Assorted chucks De Luxe 16/M14

125 031 250 958 105 300

• wide swivel range of 1200 mm and 360° allows machining on external setup tables - ideal for batch productions • large, ground setup table with 3 clamping flutes • motorized height adjustment across the entire boom speed Drive Capacities main motor rating motor rating, feed motor Dimensions / Weight dimensions without base frame weight Part No.

For the latest specials, visit

www.knuth.de

rpm

60, 120 (2 gears)

kW kW

0.75 0.75

mm kg

1130 x 630 x 1600 385 162 525

Box-Column Drill Press

KSB Superior Rigidity for Demanding Drilling, Reaming and Thread-Cutting Tasks • box-column design provides high load capacity, and is torsionproof and rigid • table and drill head can be moved individually for an optimum machining height • 9-step feed and speed gears, with oil-bath lubrication • high torque across the entire speed range • thread-cutting unit automatically reverses upon reaching the preset depth Specifications drilling capacity in steel feed force torque spindle drive spindle taper throat vertical head travel quill stroke speed range / # spindle feeds / # max. spindle nose-to-table dist. vertical table travel T-slot width / # table setup area coolant pump flow rate overall dimensions (LxWxH) weight Part No.

mm N Nm kW mm mm mm min-1 mm/U mm mm mm mm W l/min mm kg

KSB 25 A 25 9000 160 2,2 MK 3 280 200 200 50-2000/9 0,056-1,80/9 725 300 14 / 3 400 x 550 90 25 962x847 x2340 950 101 691

KSB 32 A 32 9000 160 2,2 MK 4 280 200 200 50-2000/9 0,056-1,80/9 690 300 14 / 3 400 x 550 90 25 962x847 x2340 950 101 692

Standard Equipment: coolant system, tapping unit, halogen work lamp, operating tools, operator manual Options • universal facing and boring head • coolant concentrate 5 L • accessory set, MT 4 (8 pieces) • reducing sleeve MT 5/4 KSB 40 B 40 16000 350 3 MK 4 335 200 250 31,5-1400/12 0,056-1,80/9 750 315 18 / 3 480 x 560 90 25 1040x905 x2530 1250 101 693

KSB 50 C 50 16000 350 4 MK 5 335 195 250 45-850/9 0,056-1,80/9 725 315 18 / 3 480 x 560 90 25 1040x905 x2535 1250 101 694

Part No. 103 402 Part No. 103 184 Part No. 104 594 Part No. 103 845

KSB 63 B 63 30000 800 5,5 MK 5 375 260 250 40-570/9 0,1-0,78/6 860 300 22 / 3 650 x 550 90 25 965x1452 x2787 2500 101 695

For more information and options, visit www.knuth.de

KSB 80 B 80 30000 800 5,5 MK 6 375 260 250 40-570/9 0,1-0,78/6 810 300 22 / 3 650 x 550 90 25 965x1452 x2787 2500 101 696

KSB 100 100 45000 1150 7,5 MK 6 480 300 310 26-320/6 0,1-0,71/6 850 300 22 / 3 760 x 650 75 25 1465x970 x3170 3500 101 697

167

Dr i l l i ng

Column Drill Presses

SSB F Super Production Drill Press with infinitely variable speed and thread-cutting function Ideal for single part and batch productions, for drilling, countersinking, reaming, and thread-cutting • very rigid construction with thick-walled column and large throat • infinitely variable speed adjustment with back gearing and digital speed display • 4 automatic drill feeds with electromagnetic clutch control and automatic shut-off when reaching the limit stop • motorized table height adjustments • large drilling table with circumferential coolant groove, height adjustment, and ± 45° swivel range • thread cutter is included with standard equipment

SSB 40 F Super is shown

digital drilling depth indicator Standard Equipment: thread-cutting unit, protective shield, halogen work lamp, coolant system, operating tools, operator manual For available options for this machine, please visit our website and search for SSB 40 / 50 F Super (Product Search) Specifications SSB drilling capacity (diam.) tapping capacity table setup area quill stroke spindle mount speed feed / settings

mm mm mm rpm mm/rev

spindle nose-to-table dist. mm spindle nose-to-foot dist. mm

168

SSB 50 F Super is shown

40 F Super 40 M 24 540 x 440 190 MT 4 60 - 2600 0.1: 0.2; 0.3; 0.4 (4) 665 1195

50 F Super 50 M 30 580 x 460 200 MT 4 50 - 2200 0.1; 0.2; 0.3; 0.4 (4) 590 1175

throat table travel

mm mm

table swivel range column diameter motor rating overall dim. (LxWxH) weight Part No.

mm kW / V mm kg

For the latest specials, visit www.knuth.de

340 570 430 (motorized) ± 45° 140 2 / 400 1000x650x2220 500 162 337

360 530 410 (motorized) ± 45° 180 2.2 / 400 1150x680x2360 650 101 668

SSB 32 Xn • SSB 40 Xn Powerful Universal Drill Presses for versatile use in the workshop • heavy cast-iron construction with thick-walled column • thread-cutting feature is standard • automatic drill feeds are activated and deactivated via electromagnetic clutch • including coolant system and work lamp • table rotates and swivels ±45° • 2-step motor (SSB 32 Xn) • head swivels ±45°, adjustable height (SSB 32 Xn) • digital speed (rpm) display (SSB 32 Xn)

coolant system is included Standard Equipment: thread cutter, protective shield, halogen work lamp, coolant system, operating tools, operator manual

SSB 40 Xn shown

For available options for this machine, visit our website and search for SSB 32 Xn or SSB 40 Xn (Product Search) Specifications drilling capacity (diam.) tapping capacity table setup area quill stroke spindle mount speed range / # feed / # settings

mm mm mm mm rpm mm/rev

spindle nose-to-table dist. mm spindle nose-to-foot dist. mm

SSB 32 Xn shown

SSB 32 Xn 32 M 20 500 x 420 160 MT 4 125 - 3030 / 12 0.1; 0.2; 0.3 / 3 630 1185

SSB 40 Xn 4 M 24 570 x 480 190 MT 4 72 - 2150 / 9 0.12; 0.24; 0.42 / 3 600 1195

throat table travel head travel head swivel range table swivel range column diameter motor rating overall dim.(LxWxH) weight Part No.

mm mm mm

mm kW / V mm kg

For more information, visit www.knuth.de

320 415 285 ± 45° ± 45° 120 1.2 / 400 835x500x1960 540 162 332

360 460 ± 45° 140 2 / 400 965x580x2275 550 162 338

169

Dr i l l i ng

Column Drill Presses

Bench-mounted Column Drill Press

TSB 25 • TSB 35 Versatile Use in Workshop Applications

TSB 35 • automatic quill feed • rpm indicator • coolant system • head swivels ± 45°

• rigid cast-iron construction • height-adjustable machine head • 6 or 12 speed levels • rectangular table with T-slots and circumferential coolant groove

TSB 35 shown

TSB 25 shown

Standard Equipment: base, protective shield, halogen lamp, coolant system (TSB 35), drill chuck, operating tools, operator manual For available options for this machine, visit our website and search for TSB (Product Search) Specifications drilling capacity in steel tapping capacity in steel Working area setup area, foot quill stroke vertical head travel spindle nose-to-foot dist. throat column diameter spindle speed

170

mm mm mm mm mm mm min-1

TSB 25 25 M 16

TSB 35 35 M 22

310 x 320 110 470 650 240 95 (6) 125-2825

370 x 360 155 515 645 320 120 (12) 125-3030

spindle mount Drive Capacities main motor rating Feed quill feeds Dimensions/Weight dimensions weight Part No.

For the latest specials, visit

MK 3

MK 4

0,75

mm/U

(3) 0,1; 0,2; 0,3

700 x 410 x 1560 220 162 340

810 x 500 x 1670 340 162 345

www.knuth.de

KST 16V shown

KSS 32 shown

Industrial Drill Presses

KST • KSS Rigid table (KST) and column drill presses (KSS) with large work tables Specifications drilling capacity column diameter quill stroke throat max. distance spindle to table spindle to foot mount spindle speed range automatic feed table setup area foot setup area motor, 400 V weight height Part No.

mm mm mm mm mm mm min-1

mm mm kW kg mm

KST 16 16 85 100 180

KST 16V 16 85 100 180

KST 25 25 85 93 180

KSS 25V 25 102 130 230

KSS 32 32 102 130 230

375 610 MT 2 (6) 290-2000 -

375 610 MT 2 (6) 290-2000 (4) 0.10; 0.14; 0.17;0.25 280 x 310 245 x 245 0.75 108 1050 162 500

425 610 MT 2 (9) 160-1820 -

680 965 MT 3 (6) 230-2160 (3) 0.10; 0.16; 0.25 330 x 380 330 x 320 1.5 190 1580 162 502

750 975 MT 3 (9) 160-1880 -

280 x 310 245 x 245 0.75 108 1050 162 510

280 x 310 245 x 245 1.1 108 1050 162 506

330 x 380 300 x 325 1.5 190 1760 162 508

For more information and options, visit www.knuth.de

• automatic feed (model KST 16V + KSS 25V) • coolant system (model KSS 25V + KSS 32) • quiet belt drive • high precision spindle bearing • handwheel and gear rack for table movement • adjustable depth stop • large quill stroke • thick-walled column

171

Dr i l l i ng

KB 32 shown

KB 20 shown

KB 25 shown

with a universal drill table: • swivels 45° • rotates 360° around column

Bench drill presses

KB 20 • 25 • 32 Specifications drilling capacity Working area table setup area spindle nose-to-table dist. spindle nose-to-foot distance throat column diameter Headstock speed range spindle mount quill stroke Drive Capacities main motor rating / 380 V Dimensions/Weight dimensions weight Part No.

KB 20 20

KB 25 25

KB 32 32

mm mm mm mm mm

290 x 290 140 - 550 640 178 80

345 x 345 140 - 850 1360 216 80

475 x 425 210 - 730 1200 254 92

min.-1 mm

(12) 120 - 2580 (12) 120 - 2580 (12) 150 - 2700 MT 2 MT 2 MT 3 80 80 120

0.55

0.75

mm kg

840x570x290 85 162 520

1440x650x320 1475x650x350 110 145 162 521 162 522

1,1

Versatile Use in Workshop Applications, for training and small-parts productions • adjustable depth stop • quiet belt drive operation • forward/reverse can be set by a single switch • headstock runs in precision-bearings • 12 speeds allow selection of optimum speeds at the workpiece Standard Equipment: drill chuck guard, 16 mm drill chuck, operator manual Options for this machine can be found on our website under KB 20, KB 25 or KB 32 (product search)

172

For the latest specials, visit

www.knuth.de

Ill. KGB 30

III. KGB 25

Gear-Drive Drill Press

KGB Specifications max. drill cap. in steel thread quill stroke spindle taper speed range spindle-to-column dist. head swivel spindle-to-table distance spindle-to-base distance travel max. head travel table setup area motor rating 400 V dimensions (L x W x H) weight Part no.

mm mm min-1 mm mm mm mm mm mm kW mm kg

KGB 25 25 M 16 140 MT 3 (8) 100 - 2900 225 110 - 405 300 275 x 315 0,55 / 0,75 390 x 552 x 1240 200 101 690

KGB 30 25 M 16 140 MT 3 (8) 100 - 2900 225 ± 45° 30 - 600 107 460 240 335 x 385 0,55 / 0,75 470 x 640 x 1670 270 101 685

Heavy-duty Gear Drill Press at a Low Price • 8 speed steps with positive torque transmission – no belt slippage • easy speed adjustment via two levers • heavy construction with thick-walled column • hand wheel for vertical feed of head • depth scale with adjustable depth stop • vertical table feed (only KGB 30) • work table swivels +/-50° (only KGB 30)

For available options for this machine, visit our website and search for KGB (Product Search)

For more information and options, visit www.knuth.de

173

Dr i l l i ng