Vehicle Access Solutions for Perimeter Protection
MSL 20 MCE Gate Motor
»» The MSL 20 MCE slide gate operator is an economical alternative for commercial and security applications where fast operating speeds and high usage is of importance. »» Drive system supports gates up to 1,500kg. »» Runs on single phase mains supply. »» Various operating modes programmable on request
are
Controller The controller contains a combined Programmable Logic Controller and Variable Speed Drive (PLC/VSD). Depending on customer requirements, various operating modes with a pedestrian open option can be programmed at the factory. Terminal strips are provided to interface with remote control devices, security access systems, keypads, safety devices and emergency stop devices. The controller provides 3 phase output power to the motor, however the mains supply needs only to be single phase.
MSL20MCE,001_EN_03/03.2015 | Subject to change without prior written notice.
Drive System The MSL 20 MCE Motor Drive is a 3 phase (240V) AC induction torque motor. While 3 phase is applied to the coils U, V & W, a magnetic field is produced which results in torque being applied to open or close the gate. Power requirement is 240V 10A single phase. The Drive system is designed for Cantilever gates up to 1,250kg, Track Gates up to 1,500kg and speeds up to 600mm/sec. Position control is achieve by the software in the integrated PLC/VSD drive unit – which does not require proximity switches, limit switches or encoders – making it easy to set up and low maintenance. A frequency invertor is part of the PLC controller to allow acceleration and deceleration of the gate for optimum performance. Safety On power failure the drive unit can be easily disengaged from the gate to allow manual movement of the slide gate. The controller has input terminals for safety devices as standard. Safety edge strips are provided as an optional feature.
Accessories Accessories include warning lights, warning signs, inductive loop detectors, PE Beams, radio controls and uninterruptable power supply.
www.ac-magnetic.com/australia
Technical Data
MSL 20 MCE Gate Motor
Power Consumption
550 watts
Voltage Single Phase
240 volts
Frequency
50 Hz
Current
1.2 Amp
Protection
IP55
Output Speed
56 Rpm
Output Torque
53 Nm
Housing
Width Depth Height
500 mm 260 mm 550 mm
Motor Weight
39 kg
Gate Weight - Cantilever
1,250 kg
Gate Weight - Track
1,500 kg
Duty Cycle
100%
Warranty
1 year
MSL20MCE,001_EN_03/03.2015 | Subject to change without prior written notice.
Diagrams provided for information purposes only
National Sales & Service 1300 364 864
Melbourne Head Office +61 3 9339 2900 info@magnetic-oz.com
Sydney +61 2 9421 8800 nswsales@magnetic-oz.com
Brisbane +61 7 3801 2100 qldsales@magnetic-oz.com
Perth +61 8 9205 9900 wasales@magnetic-oz.com
www.ac-magnetic.com/australia