L‑DALI Relay Module
DALI OPC
LDALI‑RM3, LDALI‑RM4
Functions
BACnet CEA‑709 Datasheet #89059020
L‑VIS, L-STAT
Features • Easy integration into LOYTEC L‑DALI lighting systems and LROC‑40x room automation controllers
• Programmable switching output for standard consumers in the power grid • Universal voltage support (120 – 347 V AC)
• Supplied via the DALI channel
• Analog Interface 0 – 10 V and 1 – 10 V for legacy dimmable lamps • DALI specification IEC 62386‑208 (Device Type 7 – Switching Function) supported • DALI specification IEC 62386‑206 (Device Type 5 – Converter) supported • Configurable relay position in case of power loss
Routers, NIC
• Up to 64 LDALI‑RM Relay Modules per DALI channel with sufficient dimensioned bus supply
• Potential‑free, bi-stable relay make contact
L‑DALI
• Device configuration with the free L‑DALI Configurator or via the built‑in web server of the L-DALI controller
Gateways
The LDALI-RM module comes with two housing options: While the LDALI-RM3 is designed for installation in distribution boxes or behind standard plugs in installa‑ tion boxes, the LDALI-RM4 allows installation on US-style fixtures or junction box ½’’ knockouts (“spud-mount”).
L‑IOB
As a unique safety feature the relay state for fault conditions can be configured: In case of a loss of power on the DALI bus, the relay will switch to the position as defined with the DALI configuration register “System Failure Level”.
L‑INX
Together with the LOYTEC DALI controllers or LROC‑40x room automation con‑ trollers, the LDALI‑RM modules act as programmable switching output modules. The integration of the module in the DALI network follows the same simple steps as the integration of a DALI lamp. The device supports the DALI specification IEC 62386‑208 (Device Type 7, “switching function”) for non-dimmable loads and the DALI specifications IEC 62386‑206 (Device Type 5, “converter”) for loads dim‑ mable via the 0 - 10 V and 1 – 10 V interface, respectively. The LDALI‑RM modules are directly connected to a DALI channel and also supplied with energy by that channel.
L‑ROC
The built-in relay contact can be used for currents of up to 10 A or loads of up to 2.500 VA, respectively. It supports a wide voltage range of 120 – 347 V AC and up to 30 V DC. Zero cross switching technology is used to be able to handle the large in-rush currents typically found in lighting applications. For legacy dimmable bal‑ lasts the LDALI-RM modules are also equipped with an 0-10 V and 1-10 V interface, which can be used together with the relay contact to control these types of loads via DALI.
L‑WEB, L‑STUDIO
The LDALI‑RM Relay Modules enable the control of standard consumers via a DALI channel. Typical application scenarios are the integration of non-DALI luminaires or other loads like fans in toilets or washrooms and motors for partition walls or screens in DALI lighting applications.
• Zero cross switching function
Interfaces Accessories
buildings under control
139
LDALI‑RM3, LDALI‑RM4
L‑WEB, L‑STUDIO
Functions
L-DALI Relay Module
DALI 1
DALI 2 1-10V
10A 250V~
LDALI-RM3 Relay Module
L‑ROC
LOYTEC www.loytec.com
Made in Austria
DALI 3
DALI 4
L‑INX
Made in Austria
POWER
DA1+ DA1DALI 1
DA2+ DA2DALI 2
DA3+ DA3DALI 3
DA4+ DA4DALI 4
DA+ DADALI 1
Made in Austria
116mA
DA+ DADALI 2
116mA
L‑IOB
LOYTEC www.loytec.com
L-DALI
Power Supply
LOYTEC www.loytec.com Input N L
85-240VAC 50/60 Hz
OUTPUT DALI 4x 116mA
LDALI-ME204-U
Made in Austria
LDALI-PWR4-U
PWR N
85-240VAC L 50/60Hz
DA+ DADALI 3 MSTP
USB 2 USB 1
DA1
DA+ DADALI 4
116mA
DA2
DA3
116mA
status
DA4
L-DALI
BACnet DALI Controller RS-485 GND +
Ethernet 2 Ethernet 1
-
Accessories
Interfaces
Routers, NIC
L‑DALI
L‑VIS, L-STAT
Gateways
85 - 240 VAC BACnet/IP
BACnet MS/TP
Specifications Type
LDALI‑RM3
LDALI‑RM4
Dimensions (mm)
51 x 41 x 21 (L x W x H), DIM042
51 x 51 x 21 (L x W x H), DIM042
Power supply
DALI bus, typ. 3.4 mA (0-10V/1-10V connected), respectively 2 mA (0-10V/1-10V not connected) at 16 V DC
Operating conditions
0 °C to 50 °C, 10 – 90 % RH, non-condensing, degree of protection: IP20
Interfaces
1 x DALI, protected against overvoltage (mains voltage) 1 x Analog interface 0 – 10 V or 1 – 10 V
DALI protocol conformance (IEC 62386 parts)
101 ed2, 102 ed2, 208 ed1 (switching) or 206 ed1 (converter)
For use with
LDALI‑3E101‑U, LDALI‑3E102-U, LDALI‑3E104-U, LDALI‑ME201-U, LDALI‑ME204‑U, LDALI-PLC4, LROC‑40x
Resource limits Number of LDALI‑RM3/LDALI‑RM4
64 per DALI channel, with sufficient dimensioned DALI bus power
Connection wires profile
0.5 – 1.5 mm² [AWG 24 – 16]
Wire stripping length
8 mm [0.31 in]
Max. switching power
2 500 VA, 300 W
Nominal switching capacity AC
10 A, 120 V AC 10 A, 250 V AC 8 A, 277 V AC 6 A, 347 V AC
Nominal switching capacity DC
10 A, 30 V DC
Relay contact switching voltage
120 - 347 V AC / 30 V DC
Switching cycle
1.5 x 105
Min. switching interval
500 ms
Max. average switching frequency
20 times/min
Interface (0 – 10 V / 1 – 10 V)
current sink 1 mA
Order number
Product description
LDALI‑RM3
DALI Relay Module 10 A, Analog Interface 0 – 10 V and 1 – 10 V
LDALI‑RM4
DALI Relay Module 10 A, Analog Interface 0 – 10 V and 1 – 10 V, “spud-mount”
140
www.loytec.com
Functions
Dimensions of the devices in mm and [inch]
L‑WEB, L‑STUDIO
DIM040
LDALI‑MS2
Ø60 [2.362] Ø78 [3.071]
L‑ROC
15° 8 [.315] 30
[1.181]
L‑INX
104 [4.095] In-wall
On-wall
Spring Ø65 cutout
[2.559]
38
max. 25
[1.496]
[0.984]
L‑IOB
DIM042
LDALI‑BM2
60
80
100 mm
LDALI‑RM3
L‑VIS, L-STAT
DIM041
40
Gateways
SCALE 1 : 3 10 0 20
LDALI‑RM4
41
7 [.276]
25.5 [1.004]
1-10V 1-10V
Relay Module LOYTEC www.loytec.com
[.827]
21 [.827]
0-10V
8A 277V~/6A 347V~
Relay Module LOYTEC www.loytec.com
Interfaces
LDALI-RM4
½″ NPSM
Routers, NIC
36.8 [1.449]
[.394]
34 [1.338]
[.126]
Made in Austria Made in Austria
10
MARCOM
10A 250V~ 250V~ 10A
LDALI-RM3
21
ø 3.2
51 [2.008]
9.0
[.354]
13.5
[.531]
46.8 [1.842]
[1.614]
L‑DALI
Made in Austria
37.8 [1.488]
max. 3 mA /LED
51 [2.008]
45.8 [1.803]
Made in Austria
41 [1.614]
Accessories
shop.marcomweb.it 10
SCALE 1 : 2 0 20
buildings under control
40
60
80
100 mm
189