Marcom OPC Server DLMS Quick Start CONNECTION •
Add and configure a new Connection like this:
DEVICE IEC Add a device to the connection:
Where: • Protocol: IEC • Address is the meter number • “Start at 300 bps” if the connection is with optical cable • “Readout” if the reading of the device is made with readout command Paolo Comai Marcom S.r.l.
DLMS Start Guide.docx
Pag. 1 1 giugno 2012
READOUT VARIABLES Click the button Apply and then the button “Device Readout”: this connect the application with the meter, do a readout and the put all the variables in the OPC Server. After that save the project and start the communication with the button Start on the main menu.
DEVICE DLMS Add a device to the connection:
• • • • • •
Protocol: DLMS Address is the meter number (can be empty) “Start at 300 bps” if the connection is with optical cable DLMS Physical address can be 0 DLMS Logic address is the mandatory logic address Referencing is SN or LN
READ THE OBJECT LIST Click the button “Read the Object List”: this connect the application with the meter, do a read of the object list and then present the following window:
Paolo Comai Marcom S.r.l.
DLMS Start Guide.docx
Pag. 2 1 giugno 2012
Where: • The check box “Only managed objects” shows only the objects managed by the application • The button “Add all as variables” insert all the managed object in the variable list of the device. After that save the project and start the communication with the button Start on the main menu.
Paolo Comai Marcom S.r.l.
DLMS Start Guide.docx
Pag. 3 1 giugno 2012