Artwork Guide
Original BENDi System Width of component (700 // 800 // 900 // 1,000mm)
When setting up the artwork for your BENDi system, please note that the width and height vary depending on the system you are purchasing. The system comes in 4 different widths (700, 800, 900 and 1,000mm wide) and 3 different heights (2,000, 2,250 and 2,700mm)
Bleed: Please include 3mm bleed on the artwork
Technical Information Please supply the artwork in any of the following file types:
Height of component (2,000 // 2,250 // 2,700mm)
Please set the artwork up to the size of the unit ordered as per opposite diagram.
Ai, EPS, PDF, JPG, TIF Ensure all files are set up in CMYK colour mode. We recommend the resolution at full scale to be no less than 150 dpi. Please also ensure that all text is converted to curves.
Note: Please be aware when creating a spread from multiple BENDi units of the panel joins. Although the graphics produce a seamless look, small text can become difficult to read if letters are split between panels. Please avoid small text or detailed graphics crossing the joins between units.
You can upload your files direct to us here: http://www.marsdendirect.co.uk/upload