Eppico

Head OďŹƒce: Borg El Mohandessen 4/51, Post code 11371Rabaa El adawia Nasr City - Cairo - Egypt Tel.: (+202) 240 18412 - 226 05695 - 240 51884 Fax: (+202) 22629718

NEISCO

Factory: Badr industrial City zone 6/71 - Cairo - Egypt Tel.: (+202) 286 41641 - 286 41642 Fax: (+202) 28641132 E-mail: info@neiscoegypt.com Website: www.neiscoegypt.com

NEISCO Neisco For Modern Waters Systems Production

HDPE Pipes

NEISCO NEISCO introduces the Best Solutions for Water Networks serving the following Water Feeding: • Drainage.

• Drip Irrigation Networks.

• Water Treatment Stations.

• Also Networks for Transfer of Gas and Petrol material through best Commercial Agents for Best International Producers.

NEISCO After gaining a large market share in Egypt as COMER Italy Distributor on the year 2000 NEISCO, under license with COMER Italy, started to produce u.PVC pressure fittings and valves branded COMER by NEISCO. The NEISCO production is according to International Standards ISO 727, DIN 8063, EN 1452 and ISO 4422/3.

The factory currently recruits more than 250 employees Management was trained in Italy by COMER NEISCO lately started to produce also PP Drippers to be inserted over the PE irrigation pipes known as “Inline Drippers” with self pressure control (pressure compensated) and without self pressure control, together with another Online Dripper called “ Turbo Key “ with different Flow Rates “ 2. 4, 8 and 16 L/H “ for producing all elements that is in Irrigation Networks ( Dripping and Irrigation ).

NEISCO is now working on completing additional product’s ranges expected to be ready on 2015/2016 for the Irrigation Networks, such as pipes, rigid PE drip lines (already in production), flat hoses drip lines, filters and accessories, on the aim to become a First Class Manufacturer of complete Irrigation System and a leader Supplier of its products to MENA Market as well as of the Africa, Asia and Europe Markets.

NEISCO has already an exceeding significant market share of the Egyptian u.PVC pressure Fittings and Valves market through a distribution network covering all major cities and NEISCO is already successfully exporting its products to over 26 Countries of Middle East, the Gulf and Africa.

Polyethylene is a thermoplastic comes from ethylene in monomer state. It is generally referred to as PE briefly in plastics industry.

Features High density polyethylene is named as HDPE. HDPE has a high resistance against water and chemicals.

HDPE has very good mechanical attributes, particularly, it has a high resistance to impact and tensile strength.

Usage -

Potable water pipelines pressure irrigation pipelines treatment plant cable Duct pipe Sewage Pipelines Solid waste drainage line

Advantages of Polyethylene Piping • They have high flexibility features. Thus, they ensure ease of installation. Elongation at break is minimum 350%.

• They are not affected from underground movements, they do not break.

• They have high impact resistance and rapid crack propagation resistance.

• Since they have Low interior surface roughness, they ensure significant advantages while selecting diameter during project design.

• They do not have installation wastage thanks to the joining method.

• Black colored pipes are resistant to UV rays.

•They do not change odor and taste of water, therefore, fit for health.

• It is not possible for plant and tree roots to penetrate inside the pipes.

PE100 Minimum required strength MRS (MPa) Value 10 PE100 Coefficient =1.25 Temperature (°C)

Coefficient (fT)

20

1

30

0.87

40

0.74

PE100 Pipe Table SDR26 - PN6 Diameter Wall Weight (mm) Thickness Kg/m (mm) 20 25 32 40 50 2.0 0.314 63 2.5 0.494 75 2.9 0.675 90 3.5 0.978 110 4.2 1.430

SDR17 - PN10 Wall Weight Thickness Kg/m (mm)

2.0 2.4 3.0 3.8 4.5 5.4 6.6

0.187 0.295 0.453 0.721 1.020 1.460 2.170

SDR11 - PN16 Wall Weight Thickness Kg/m (mm) 2.0 0.112 2.3 0.171 3.0 0.272 3.7 0.430 4.6 0.666 5.8 1.050 6.8 1.470 8.2 2.120 10 3.140

In line Dripper - PC

In line Dripper - NON PC

The IN LINE DRIPPER PC “COMER BY NEISCO” are compensating flow emitters with a silicone rubber discharge at different pressures. We produce IN LINE DRIPPER PC “COMER BY NEISCO” in two models: 2,4 L/H. We recommended to use it in hilly areas or on terrains with different level of inclination.

The IN LINE DRIPPER “COMER BY NEISCO” are cylindrical dripper, designed with along, wide labyrinth. This configuration provides a turbulent water flow which minimizes formation of residues that may cause clogging. We produce “COMER BY NEISCO” flow emitters in four models:2,4 L/H

Structure and features

Structure and features

• Unique flow regulating concept : a wide effective labyrinth, leading into the flow control chamber, where a sensitive floating diaphragm regulates and maintains a constant flow rate at variable inlet pressure • Operating pressure range 0.8 -3.0 bar • Resistant to chemicals and fertilizers commonly used in agriculture.

• Large surface inlet filter • Outstanding clogging resistance for all flow rates • Operating pressure 1.0 bar • Resistant to chemicals and fertilizers commonly used in agriculture

IN LINE DRIPPER 16mm

IN LINE DRIPPER PC 16mm Lateral length(m)

Operating pressure range 0.8 -3.0 bar

IN LINE DRIPPER PC 20mm

*Recommended working pressure: 1.0 bar

0.8

1

1.5

Act. Flow Rate (L/H)

1.7

2

2.1 2.15 2.2

2

3

Operating pressure range 0.8 -3.0 bar

0.8

1

1.5

2

3

3.7

3.9

4

4.2

4.2

Diameter (mm)/ Flow Rate

Diameter (mm)/ Flow Rate

IN LINE DRIPPER 20mm

0.3 0.33 0.5 0.75

Lateral length(m)

60

80

1

120 160 200

0.3 0.33 0.5 0.75 60

*Recommended working pressure: 1.0 bar

70

90

1

120 150

On Line Dripper - PC

On Line Dripper - NON PC

The ON LINE PC DRIPPER “COMER BY NEISCO” are an on line pressure compensating flow emitters with a removable tob cap and a silicone rubber diaphragm that regulates water discharge at different pressures.

We produce “COMER BY NEISCO” compensating flow emitters in two models 4 , 8 L/H. We recommended to use it in hilly areas or on terrains with different level of inclination

The ON LINE DRIPPER “COMER BY NEISCO” are turbulent flow emitters with a removable top cap wich allows easy inspection and cleaning. We produce “COMER BY NEISCO” flow emitters in four models: 2, 4, 8, 16 L/H

Structure and features

Structure and features

• Dripper can be opened to facilitate easy cleaning • Manufactured from virgin plastic for stable performance • Turbulent flow path with wide cross-sectional area ensures clog resistance • Extended outlet facilitates use of PE extension tube or vinyl tube • Regulating pressure range: 0.8-2.5 bar • Filtration requirement: 120 mesh, 130 micron

• Dripper can be opened to facilitate easy cleaning • Manufactured from virgin plastic for stable performance • Silicone rubber diaphragm ensures consistent performance for longer period • Narrow cross-shaped inlet acts as a filter • Optional anti-bug cap prevents intrusion of insects • Self-cleaning design ensures flushing at all times during operation • Wide operating pressure compensating range allows longer length of laterals • Regulating pressure range: 0.8-3 bar • Filtration requirement: 120 mesh, 130 micron

Technical data: Technical data: Color

FLOW (L/H)

Red Blue

4 L/H 8 L/H

PRESSURE (bar) 0.8 3.8 7.7

1 4 7.8

1.5 4.1 7.9

2 4.15 8

2.5 4.2 8.1

3 4.3 8.1

Color

FLOW (L/H)

Black Blue Brown Green

2L/H 4L/H 8L/H 16L/H

PRESSURE (bar) 0.8 1.9 3.8 7.8 15.6

*Recommended working pressure: 1.0 We test our product to better satisfy customer needs and to ensure the highest standards of quality and reliability

1 2.1 4.2 8.2 16.2

1.5 2.5 4.5 9 17

2 2.8 4.8 9.5 18.2

2.5 3.1 5.1 10 19.5

PP Compression

MATERIALS Body and nut are made of polypropylene copolymer (PP- B), conical Gaskets (special O-Rings) of NBR 70 shore (UNI 4920), clinching rings of acetalic resin. The threaded female offtakes from diametre 1¼” are reinforced with AISI 430 stainless steel ring

Feed and push the body along the pipe axis.

MAXIMUM WORKING TEMPERATURE Polypropylene: 100° C Acetalic resin: 80° C

Comer by Neisco PP compression is a ready installed fittings with non disassembling procedures or breakup . moreover bigger size pipe can be easily inserted due to the fact no hindrance between attaching the clamping and the pipe insertion procedure doesn't requires special tools to install the fittings with the pipeline

MAXIMUM WORKING PRESSURE PN 16 from diametre 20 mm. up to 63 mm. PN 10 from diametre 75 mm. up to 110 mm. Reduced security factor for items with female thread 4”

Before screwing the locking nut on the body, ascertain that the pipe hits the body inside step.

The full screwing of the locking nut can be made by hand till Ø 50 / 63 mm., whereas for bigger dimensions it is advisable to use a wrench

5

STANDARDS Compression joints are complying with UNI9561, UNI 9562, DIN 8076-3 , ISO 14236, ISO 13460 Threads are complying with ISO 7/1 BS21 APPROVALS COMER by NEISCO compression joints are suitable for alimentary fluids handling in accordance with the norms and prescriptions issued by the Ministry of Health Gazette n. 174 dated the 6nd of avril 2004 and are approved by: - JASWIC (Joint Acceptance Scheme for Water Installation Complements) in the Republic of South Africa.

Neisco now is activity working on obtaining the most important approvals from other international Institutes.

ASSEMBLY INSTRUCTIONS Cut the pipe at 90° and chanfrin it.

Insert at first the locking nut then the clinching ring, avoiding to push it too much forward on the pipe, the collar and O- ring.

4

3 2 1

As our lip gasket enjoys special properties, no pre-lubrication procedure is required. this special properties give superior hydraulic performance in case of ovalized , scratched or even under sized pipes In addition, the special Conical Gasket O-Ring of the COMER by NEISCO compression Joints is granting the best performance in case of water hammer and/or water pressure peak inside the joint’s body.

SO310

COUPLING MANCHON ‫وﺻﻠﺔ‬

dXd

D

d

L

20 x 20 25 x 25 32 x 32 40 x 40 50 x 50 63 x 63 75 x 75 90 x 90

44 52 63 76 91 107 125 150

20 25 32 40 50 63 75 90

109 121 137 167 184 214 243 307

RS310 REDUCING COULING MANCHON REDUIT ‫وﺻﻠﺔ ﻣﺨﻔﻀﺔ‬ part

Description

1

Nut

2

Clinching Ring

3

Collar

4

Lip Gasket

5

BODY

l 53 59 67 82 90 105 119 151

Z g 3 3 3 3 4 4 5 5

62 93 131 270 430 670 894 1330

CA370

‫ﻧﻬﺎﻳﺔ‬ d

AD312

SO312

TE340

END CAP BOUCHON

D

Tee 90° Te à 90°

°٩٠ ‫ﻣﺸﺘﺮك‬

d

L

l

g

dxdx d

D

d

L

l

L1

20 x 20 x 25 x 25 x 32 x 32 x 40 x 40 x 50 x 50 x 63 x 63 x 75 x 75 x 90 x 90 x

44 52 63 76 91 107 125 150

20 25 32 40 50 63 75 90

130 147 168 207 234 277 319 402

53 59 67 82 90 105 119 151

65 73 84 103 117 138 159 201

20 25 32 40 50 63 75 90

Z

g

24 29 34 43 54 67 81 100

100 150 230 430 680 1100 1900 2200

ADAPTOR MALE THREADED RACCORD MALE

‫ﺑﺪاﻳﺔ ﺧﻂ ﺳﻦ ﺧﺎرﺟﻰ‬ d x G D

d

L

l

H

Z

g

20 20 25 25 25 32 32 32 40 40 40 50 50 63 63 75 75 90

20 20 25 25 25 32 32 32 40 40 40 50 50 63 63 75 75 90

88 88 94 95 97 102 106 106 127 129 129 140 141 154 160 179 178 213

53 53 59 59 59 67 67 67 82 82 82 90 90 105 105 119 119 151

18 18 18 18 20 18 20 22 22 24 24 24 26 24 26 26 26 28

35 35 35 36 38 35 39 41 45 47 47 50 51 49 55 60 59 62

38 40 50 52 52 78 80 90 140 150 160 236 250 380 390 730 750 774

x x x x x x x x x x x x x x x x x x

1/2" 3/4" 1/2" 3/4" 1" 3/4" 1" 1 1/4" 1" 1 1/4" 1 1/2" 1 1/2" 2" 1 1/2" 2" 2" 2 1/2" 3"

44 44 52 52 52 63 63 63 76 76 76 91 91 107 107 125 125 150

d x

G

D

d

L

l

H

Z

g

20 20 25 25 25 32 32 32 40 40 50 50 63 63 75 75 90

1/2" 3/4" 1/2" 3/4" 1" 1/2" 3/4" 1" 1 1/4" 1 1/2" 1 1/2" 2" 1 1/2" 2" 2" 2 1/2" 3"

44 44 52 52 52 63 63 63 76 76 91 91 107 107 125 125 150

20 20 25 25 25 32 32 32 40 40 50 50 63 63 75 75 90

89 90 95 99 104 105 106 123 128 128 139 145 155 160 174 179 217

53 53 58 58 58 67 67 67 82 82 90 90 105 105 119 119 151

18 18 18 18 20 18 18 20 22 27 27 29 27 29 29 30 33

18 19 18 18 20 19 19 19 24 19 22 22 22 26 26 30 33

54 60 65 67 74 90 90 95 200 220 253 270 420 440 780 820 1000

x x x x x x x x x x x x x x x x x

‫ﻣﺸﺘﺮك ﻣﺨﻔﺾ‬

TE341

d1xdxd1

D

d D1

d1

L

l

25 x 20 x 25 32 x 25 x 32 40 x 32 x 40 50 x 32 x 50 50 x 40 x 50 63 x 50 x 63

44 52 63 63 76 91

20 25 32 32 40 50

25 32 40 50 50 63

147 168 207 234 234 277

59 67 82 90 105 127

52 63 76 91 91 107

L1 l1 68 78 91 98 110 127

53 59 67 67 82 90

Z

g

29 34 43 54 54 67

145 230 360 550 640 940

90° TEE with THREADED MALE OFFTAKE TE à 90° avec DERIV.FILETTEE MALE

°٩٠ ‫ﻣﺸﺘﺮك ذو ﺳﻦ ﺧﺎرﺟﻰ‬

ADAPTOR FEMALE THREADED RACCORD FEMALLE

‫ﺑﺪاﻳﺔ ﺧﻂ ﺳﻦ داﺧﻠﻰ‬

TR340 Tee 90° reduced TR340 Te à 90° reduit

dxG

x d

D

d

L

l

L1

H

Z

g

20 x 1 /2 " 20 x 3 /4" 25 x 3/4" 25 x 1" 32 x 3/4" 32 x 1" 40 x 1 1/4" 50 x 1 1/2" 63 x 2"

x 20 x 20 x 25 x 25 x 32 x 32 x 40 x 50 x 63

44 44 52 52 63 63 76 91 107

20 20 25 25 32 32 40 50 63

130 130 147 147 168 168 207 234 277

53 53 59 59 67 67 82 90 105

45 45 49 51 53 56 64 73 86

18 18 18 22 18 22 24 26 28

24 24 29 29 34 34 43 54 67

80 80 111 111 168 168 330 539 880

TE342

EL352 90° ELBOW W/THR. FEMALE OFFTAKE

90° TEE with THREADED FEMALE OFFTAKE TE à 90° avec DERIV.FILETTEE FEMELLE

COUDE à 90° avec DERIV. FILETTEE FEMELLE

‫ ذو ﺳﻦ داﺧﻠﻰ ﻣﻦ ﻃﺮف واﺣﺪ‬°٩٠ ‫ﻛﻮع‬

°٩٠ ‫ﻣﺸﺘﺮك ذو ﺳﻦ داﺧﻠﻰ‬ dxG

x d

20 x 1/2" x 20 x 3/4" x 25 x 1/2" x 25 x 3/4" x 25 x 1" x 32 x 3/4" x 32 x 1" x 40 x 1" x 40 x 1 1 /4" x 50 x 1 1/2" x 63 x 2 x 75 x 2 1/2 " x 90 x 3" x

EL350

20 20 25 25 25 32 32 40 40 50 63 75 90

D

d

L

l

L1

H

Z

g

d x

G

D

d

L

l

L1

H

Z

g

44 44 52 52 52 63 63 76 76 91 107 125 150

20 20 25 25 25 32 32 40 40 50 63 75 90

130 130 147 147 147 168 168 207 207 234 277 319 402

53 53 59 59 59 67 67 82 82 90 105 119 151

42 42 42 47 50 51 53 53 61 71 85 95 111

18 18 18 18 20 18 20 20 22 27 29 30 33

24 24 29 29 29 34 34 43 43 54 67 81 100

78 78 114 114 172 190 190 335 335 565 878 1445 1700

20 20 25 25 32 32 40 50 63 75 90

1/2" 3/4" 3/4" 1" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3"

44 44 52 52 63 63 76 91 107 125 150

20 20 25 25 32 32 40 50 63 75 90

65 65 73 73 84 84 103 117 138 159 201

53 53 59 59 67 67 82 90 105 119 151

42 42 47 50 51 53 61 71 85 97 111

18 18 18 20 18 20 22 27 29 30 33

12 12 14 14 17 17 21 27 33 40 80

54 54 74 74 111 111 225 368 570 1120 1440

90° ELBOW COUDE à 90°

°٩٠ ‫ﻛﻮع‬

d xd

D

d

L

l

Z

g

20 x 20 25 x 25 32 x 32 40 x 40 50 x 50 63 x 63 75 x 75 90 x 90

44 52 63 76 91 107 125 150

20 25 32 40 50 63 75 90

65 73 84 103 117 138 159 201

53 59 67 82 90 105 119 151

12 14 17 21 27 33 40 50

75 110 150 320 480 680 1320 1600

EL351 90° ELBOW W/THR.MALE OFFTAKE

COUDE à 90° avec DERIV. FILETTEE MALE

‫ ذو ﺳﻦ ﺧﺎرﺟﻰ ﻣﻦ ﻃﺮف واﺣﺪ‬°٩٠ ‫ﻛﻮع‬

d x

G

D

d

L

l

L1

H

Z

g

20 20 25 25 25 32 40 50 63 75 90

1/2" 3/4" 1/2" 3/4" 1" 1" 1 1 /4" 2" 2" 21/2" 3"

44 44 52 52 52 63 76 91 107 125 150

20 20 25 25 25 32 40 50 63 75 90

65 65 73 73 73 84 103 117 138 159 201

53 53 59 59 59 67 82 90 105 119 151

45 45 49 49 51 56 64 75 86 97 111

18 18 18 18 22 22 24 28 28 30 33

12 12 14 14 14 17 21 27 33 40 80

54 54 76 76 76 100 225 340 560 1120 1440

x x x x x x x x x x x

x x x x x x x x x x x

Saddles

SA350 CLAMP SADDLES IN PP FOR POLYETHYLENE AND PVC PIPES / WITH REINFORCING RING COLLIERS DE PRISE EN PP POUR TUYAUX EN PE ET PVC /AVEC ANNEAU DE RENFORCEMENT ‫رﻛﺎب ﺑﻮﻟﻲ ﺑﺮوﺑﻠﻴﻦ ﻻﻧﺎﺑﻴﺐ اﻟﺒﻮﻟﻲ اﻳﺜﻠﻴﻦ وال ﺑﻲ ﻓﻲ ﺳﻲ‬ /‫ﻣﻊ اﻟﺤﻠﻘﺔ اﻟﻤﻌﺪﻧﻴﺔ‬

Material:

Body U.V. stabilized polypropylene Bolts galvanized Steel / Stainless Steel Oring NBR / EPDM

Working Pressure:

20° C: 10 bars up to D. 160 6 bars above Suitable for drinking water and alimentary fluids

Notes: dxG

SA351

20 x 1/2" 25 x 1/2" 25 x 3/4" 32 x 1/2" 32 x 3/4" 40 x 1/2" 40 x 3/4" 40 x 1" 50 x 1/2" 50 x3/4" 50 x 1" 50 x 1 1/4" 63 x 1/2" 63 x 3/4" 63 x 1" 63 x 1 1/4" 63 x 1 1/2" 75 x 1/2" 75 x 3/4" 75 x 1" 75 x 1 1/4" 75 x 1 1/2" 75 x 2" 90 x 1/2" 90 x 3/4" 90 x 1" 90 x 1 1/4" 90 x 1 1/2" 90 x 2" 110 x 1/2" 110 x 3/4" 110 x 1" 110 x 1 1/4" 110 x 1 1/2" 110 x 2" 110 x 3" 125 x 3/4" 125 x 1" 125 x 1 1/4" 125 x 1 1/2" 125 x 2" 125 x 3" 140 x 3/ 4" 140 x 1" 140 x 1 1/4" 140 x 1 1/2" 140 x 2" 160 x 3/4" 160 x 1" 160 x 1 1/4" 160 x 1 1/2" 160 x 2" 160 x 3" 160 x 4"

Weight (g) 60.2 60.2 57.7 71.1 68.6 103 101 106 204 210 213 224 235 231 231 220 239 262 272 264 283 300 313 350 341 341 343 361 363 505 499 503 507 546 522 578 508 507 509 509 518 836 748 753 779 784 813 792 788 794 826 798 1097 1111

Bolts 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6