1.Identify all the necessary items. Identify all the items necessary for assembly: • 1 x 85mm bolt. • 1 x 70mm bolt. • Frontend Lever. • Main boom frontend body. • 2 x 1mm boom connector shims. • 2 x 2.5mm boom connector shims. • 2 x plastic O rings spacers. • 1 x mast shim.
2.Remove old one.
2 X 1MM BOOM CONNECTOR SHIMS
2 X 2,5MM BOOM CONNECTOR SHIMS
MAST SHIM
70mm BOLT
85mm BOLT
MAIN BOOM FRONTEND BODY
PLASTIC O RINGS SPACERS
FRONTEND LEVER
Next, take off your old boom head unit.
3.Shim thickness. Determine which shim thickness you will need and install the correct one. The 1mm shim’s will fit a 40mm carbon boom front section. The 2.5mm shims will fit a 36mm boom front section. Set them on with the seams facing the boom tail, and the slanted edge to the inside as shown.
www.mauisails.com | 0