/aspsellsheets2011

Page 1

AGENT BATON ™

The combination of discreet concealment and rapid presentation make the Agent Baton an ideal impact weapon for administrators, investigators and undercover operatives. The baton incorporates a 4140 steel striking surface. The 7075 T6 aluminum middle shaft and finely knurled clip ring grip are forged to shape and then precision machined. The handle and shafts of the Agent Baton are Electroless Nickel plated. The Agent Baton expands to a 16 LeverLoc.® It has the form, fit and striking potential of a duty baton. The reduced diameter, low profile grip of the Agent may be concealed inside the waistband or worn on the belt. The Snap Loc™ Clip may be adjusted to a variety of positions along the handle to enhance concealment or ease of presentation. As with all LeverLoc Batons, the Agent is retracted with a simple twist.


Agent Baton Cap Retention O-Ring

Handle Tube

Replaceable Cap

Snap Loc Clip

Carry Ring

Background Custom formulated tubing High strength Custom drawn Specifications Retracted Length Expanded Length Diameter Weight Locking System

7.75" 19.69 cm 15.75" 40.00 cm .875" 22.23 cm 7.3 ounces 2.07 grams LeverLoc®

Steel Tubing 4140 49-57 RC 240,000 PSI tensile 225,000 PSI yield Aluminum Tubing 7075 T6 87 RB 83,000 PSI tensile 73,000 PSI yield

Middle Tube Locking Lugs

Middle Tube Stop

Middle Tube

Crosstec Knurling

Eccentric Locking Groove

End Tube Locking Lugs

End Tube

End Tube Stop

Middle Tube 7075 T6 aluminum Electroless Nickel plated

Eccentric Locking Groove

Threaded Tip

Grip Crosstec knurling Fine line knurling Spiral micro grooves Machined clip rings One inch on center Electroless nickel coated

LeverLocs High carbon steel Heat treated Electroless Nickel plated

Cap Electroless nickel plated O-ring sealed

Tube Stops High carbon steel Heat treated Electroless Nickel plated

Snap Loc Clip .040 thick Heat treated spring steel Black Chrome plated

Tip Carbon steel Electroless Nickel plated Lockup Lever controlled lugs Eccentric cam groove

Striking Surface 4140 steel Electroless Nickel plated

Crosstec Knurling on the Agent Baton provides a secure grip without causing abrasion.

Maintenance Kits are available to service your Agent Baton.

Carry your Agent ™ Baton in your pocket, on a dress belt or inside your waistband.

Snap Loc™ clips are removable. Retract your Agent Baton by stabilizing the end tube. Rotate the middle tube clockwise while pressing the end tube inward. Then stabilize the middle tube. Rotate the handle while pressing the middle tube inward.

®

“Protecting Those Who Protect” Agent Baton

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2010 ASP


BATON CAPS

Each distinctive cap in the ASP gallery of designs is compatible with three million ASP Batons currently in service throughout the world. Whether you own a Friction Loc速 or LeverLoc速 expandable, these specialized additions to your baton will fit and function flawlessly. Each cap serves a specific need. Each will enhance your performance. Each will increase your safety. ASP Baton Caps are precision machined from high strength alloy steel or lightweight aircraft aluminum. They are undercoated to protect their threads. A surface finish guards against abuses of the street. Each cap is o-ring sealed to the expandable baton that it enhances.


A Distinctive Addition to your ASP Baton BATON CAP SERIES 543_ _

521_ _

544_ _ 541_ _ 52916 523_ _

542_ _

52915 Logo Caps are available with 66 standard Prestige insignias including ASP Certification, operational specialty, US military and State Seals. Logos are offered in Brass or Nickel Silver.

Logo Band Caps are available with Gold (52100) or Silver (52300) Bands to accent the Tactical Baton®. Caps are produced for all Prestige insignias.

52921

Grip Caps are designed to enhance retention. The Grip Cap is available in Textured, Electroless® and with Prestige insignias.

547_ _

545_ _

52920

548_ _

546_ _

Leverage Caps lock the baton in the officer’s hand improving retention and control. This unique design increases both speed to target and impact potential. Available in Textured Black, Electroless, Gold Band (54700), Silver Band (54800) and with Prestige insignias.

PRESTIGE LOGOS Distinctive insignias are available in Brass, Nickel Silver or color fill. To order, combine the first three numbers of the selected Baton Cap with the two numbers of the desired Prestige Logo.

52923

Custom logos are available in Brass, Nickel Silver or color fill. They may be die struck on request for individual agencies or divisions. Custom logos are available with an order for 20 Logo Caps or Guardian Handcuff Keys.

BreakAway ® subcaps are designed to be interposed between the cap and handle of an expandable baton. Removing the cap exposes three ceramic pins set in a machined aluminum geodome. The BreakAway provides rapid entry through a vehicle window.

52922

01

02

03

04

05

06

07

08

09

10

11

12

13

14

15

40

41

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74


TACTICAL TRIADS

55601

Tactical Triads速 attach a brilliant white 70 lumen light to an ASP Tactical Baton. A rotary switch guards against accidental activation of the compact Lithium powered LED.

TACTICAL DEFENDERS

52854 Tactical Defenders速 place two proven control tools conveniently in hand. The straight line activation system of the Defender OC is combined with the proven dependability of the ASP Tactical Baton.

52914 Wrist Strap Caps are designed for mounted units. The stainless steel cap incorporates a closed loop parachute cord retaining strap and adjustable ball slide.

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90


®

“Protecting Those Who Protect” Baton Caps

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2008 ASP


BATON SCABBARDS

Protection, portation, presentation. The three criteria of any baton scabbard. Each carrier must define a compromise between security and speed of presentation. It must provide a level of protection without compromising access. The case must secure the baton without hindering rapid deployment. On the street, there can be no tolerance for second best. A scabbard that fails may compromise baton access during the critical point of a confrontation.

Under the most severe tactical conditions, ASP Scabbards do not fail. They combine protection with access. They secure the baton during transport. They allow a firm grip and rapid presentation. ASP Scabbards excel. Under the most severe tactical conditions, they have no equal. Each day the nation’s most respected and tactically sophisticated law enforcement agencies trust their safety to ASP. Each day ASP Scabbards are the first choice of those who cannot afford less.


SideBreak The foundation of the ASP gallery of Baton Scabbards. The Rotating SideBreak® swivels to 12 distinct positions or may be locked upright on the duty belt. A retracted or expanded baton may be rapidly presented, yet is securely retained during dynamic confrontations. Expanded batons may be presented out the side of the carrier. Available in Black, Ballistic, Basketweave and ASPtec® finishes.

SideBreak Paddle The Paddle Scabbard is easily attached to and removed from the belt. It provides secure retention and rapid presentation of an expandable baton. The carrier may be worn straight or angled on the Strong or Reaction Side. The compact design secures and conceals the full range of ASP expandables.

Duty This “soft” design baton scabbard is ideal for military, investigative or security personnel. The carrier snaps onto the belt. It securely retains a retracted or expanded ASP Baton as well as the ASP Triad® Series of lights in a lens up or lens down configuration.

MOLLE Designed for military or special operations, this rotating polymer SideBreak Scabbard will clip onto all MOLLE equipped vests and equipment. The case swivels to 12 distinct positions or may be locked in place. A retracted or expanded baton may be rapidly presented, yet is securely retained during dynamic confrontations. Expanded batons may be presented out the side of the carrier.

Federal Paddle Designed for the investigator or plainclothes officer. This Paddle Scabbard rapidly clips onto and off of the belt. It may be worn straight or angled on the Strong or Reaction Side. The Paddle distributes the weight of the baton over the hip. The carrier will retain a retracted or expanded ASP Baton.

Federal A compact, reduced form carrier for the Tactical Baton®. The Federal® Scabbard is designed for those officers who prefer a closed front ASP case. The carrier adjusts to a variety of belt widths. It rotates to 12 distinct positions and will retain a retracted or extended ASP Baton.


SideBreak Scabbards allow rapid presentation of an expanded baton.

Federal Scabbards are compact. They securely retain the ASP Baton.

The soft side Duty Scabbard is easily attached and rigidly secure.

Black Ballistic Basketweave ASPtec速

Belt loops are sized for duty belts. They incorporate an adjustable belt slide.

The Paddle allows a Federal or SideBreak Scabbard to be worn in a variety of investigative configurations.

The retaining clip of ASP polymer scabbards can be adjusted for ease of presentation or strength of retention.

The hex tool in polymer baton scabbards is removed with the double lock pin of a handcuff key. It is used for both adjustment and disassembly.

Baton scabbards are available in Series 16, 21 and 26 lengths.

The SideBreak Scabbard retains the baton tip with four plates which flex open to allow carry of an expanded baton.

Federal Scabbards retain the baton tip with a single plate which can be bypassed by angled insertion of the baton.

SideBreak Scabbards are fitted with spare retention screws.

The polymer SideBreak Scabbard will flex open to present an expanded baton.

The Duty Scabbard is soft, yet secure.

The elastic technologies of the Duty Scabbard will retain 16, 21 or 26 batons.

SideBreak and Federal Scabbards rotate to 12 distinct positions.

Paddle Scabbards adjust to 5 distinct positions.

Duty Scabbards retain Triad lights in a lens up or lens down position.

FEATURES


Classic Carriers with a Hidden Advantage Each Tactical Baton Scabbard in the ASP gallery of designs is fabricated for a specific purpose. Each employs advanced computer aided design and fabrication concepts. ASP Scabbards are a benchmade blend of retention, safety and speed. Each baton case is fashioned with the same painstaking attention to detail as the finest pistol holster.

16

21

26

Black

52232

52432

52632

Basketweave

52233

52433

52633

Ballistic

52235

52435

52635

ASPtec

52234

52434

52634

52236

52436

52636

52245

52445

52645

52238

52438

52638

Black

52239

52439

52639

Black

32232

32432

32632

Ballistic

32235

32435

32635

ASP designs utilize strategically positioned lines of tension and zero tension areas. Each carrier incorporates ISO certified construction in designs so unique that they are patented. The result is a series of compact, inconspicuous and extremely effective carriers for the ASP Baton.

SideBreak Slide

SideBreak Paddle Black

MOLLE Black

Federal Slide Black

Federal Paddle

Duty

®

“Protecting Those Who Protect” Baton Scabbards

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2008 ASP


BREAKAWAY


ASP BreakAway . . . When Split-Second Entry is Crucial A

The flexible gasket that seals a car window acts as a cushion when trying to enter the vehicle with a baton. Window punches require straight-on activation placing an officer in front of a threat. They can carry the hand through a window and into the interior of a vehicle.

B

Most window entry tools are not readily available. They are in the patrol car or equipment case at the split second when they are needed.

C

The ASP BreakAway ® subcap is designed to be interposed between the cap and handle of an expandable baton. It is always available. It is readily at hand. Removing the baton cap exposes the three ceramic pins of the BreakAway. Set in a machined aluminum geodome, at least one pin will make contact with the tempered glass of a car window whatever the angle of application. The officer can stand to the side of a threat, grasp the tip of the baton and easily shatter any vehicle window. Entry is rapid and tactically sound.

D A Ground Ceramic Pins B Precision Geometric Dome C Accepts all ASP Attachments D Mounts to any ASP Baton

Black Electroless

BreakAway window breakers can be attached between the cap and handle of any ASP Baton. They add less than .75" to the baton length.

BreakAway attachments can break out windshields for emergency entry. Punch a large circular pattern with the BreakAway. The ceramic pins will penetrate the glass making it possible to break out the perforated area.

The three ceramic pins of the BreakAway provide instant entry through tempered glass.

®

“Protecting Those Who Protect” BreakAway

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2008 ASP


FRICTION LOC BATONS ®

On the street, there can be no tolerance for second best. It is here that the nation’s most respected and tactically sophisticated law enforcement agencies trust their safety to ASP. An impact weapon system of uncompromising quality from a firm with a long tradition of agency service. Under the most severe tactical conditions, ASP products have proven themselves virtually indestructible. Easily carried. Readily at hand. Low profile. Improved public image. Unparalleled psychological deterrence. Devastatingly effective. ASP. . . protecting those who protect.®


Field Proven Performance

Airweight® offers a 45% weight reduction with 98% of the striking potential of steel.

Black Chrome provides the most durable and corrosion resistant black baton finish available.

Chrome delivers a high lustre finish for increased visibility under low light conditions.

Electroless® is the most corrosion resistant finish. It is well suited to high humidity environments.

Gold offers a jewelry quality 18K finish. It is ideal as a gift, award or for presentations.

Maximum Yield Strength

Foamed vinyl grips are extremely durable and replaceable. The 4140 steel used to manufacture ASP Batons is significantly stronger than the 4130 used by other manufacturers. Injection molded DuraTec® grips are permanently bonded to the baton handle.

Wavemaster grips provide a secure hold and increased control. Independent laboratory tests have confirmed the superior corrosion resistance of ASP products.

®

Friction Loc Batons

Airweight* Black Chrome Chrome Electroless

F16

Foam

DuraTec

Wavemaster

FA FB FC FE

DA DB DC DE

WA WB WC WE

F21

F26 The patented ASP Retaining Clip is replaceable and color coded. It identifies the manufacturing date of each expandable baton.

* Airweight Batons weigh 45% less than steel models. They are not recommended for uniform duty use. ®

“Protecting Those Who Protect” Friction Loc Batons

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 1997 ASP


Lasting Impressions at the Speed of Light Custom German optics. A precision focused beam. The most advanced computer graphics. ASP laser engraving stands above all others. Highly skilled technicians. Sophisticated new machines. A laser lab that produces images of incredible detail. These are impressions of unmatched quality. Digital technology directs the precision beam of the laser. A light so intense it vaporizes metal. A mark that is crisp, precise and permanent. This is the most sophisticated engraving technology available. Images of quality. Lasting impressions at the speed of light.


Create Your Own Lasting Impressions The Process A Custom Work Order must be completed for each product that is to be engraved with a laser logo. This order will specify the preparation cost for computer conversion of the original artwork. The digital conversion is a one-time investment that can be used indefinitely and is maintained by ASP. A set-up charge applies to all orders under 576 pieces. The individual cost of the logos being ordered will be determined by the number of insignia that are engraved during each production run. ASP Products ASP designs may be laser engraved in a variety of configurations. Once an image has been converted, it may be used on all ASP products. The concentrated beam of the laser vaporizes the surface coating of the metal. The image color is white against the background of the metal coating.

Onyx Rich black logos are achieved with the exclusive ASP Onyx process. A blend of laser engraving and metal coloration, each insignia is attractive, durable and distinctive. Your Artwork Camera-ready or digital artwork must be provided for the insignia to be engraved. The quality of the original artwork will directly affect the quality of the final imprint. Camera-ready artwork must be high quality and at least four inches in length. Digital artwork is the preferred method for providing logos. This electronic artwork must be a bitmap image at 1200 dpi resolution, one inch in length in a PCX file or a black and white Adobe Illustrator vector based drawing file (for MAC or PC) with any typography converted to paths. The logo file must be a complete drawing using no placed images. E-mail or use a floppy, CD or Zip disk for transport. ®

“Simply Brilliant” Laser Engraving

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . www.asp-usa.com

© 2003 ASP


LEVERLOC BATONS 速

Elegantly simple. Incredibly strong. Easily carried. Rapidly deployed. A new twist for retraction. A new standard for convenience. The LeverLoc Baton from ASP. Four heat treated levers assure extension. Four internal lugs provide a positive lockout. A design that is both stable and secure. A baton that is both effortless and effective. Eccentric retention grooves allow opposing locking lugs to cam free. The baton is closed with a simple twist. 4140 steel. Foamed vinyl, DuraTec速 or Wavemaster grips. Compatible with all existing Tactical Baton 速 caps and accessories. Fits all Tactical Baton scabbards. The LeverLoc Baton retains all that you have come to expect from ASP. Premium materials, exceptional workmanship, flawless function. This is a baton that combines an incredible psychological deterrence with unparalleled control potential. Quality, durability and performance in every detail.


ASP LeverLoc. . . the Baton with a New Twist Music Wire Retention Clip

Middle Tube Stop

Stainless Steel Retention Post

End Tube Stop

Nylon Locking Insert

Grip Insert

Eccentric Locking Grooves Extended Tip

Retention Clip Assembly

Replaceable Cap

Cap Retention O-Ring

Middle Tube Locking Lugs

Nylon Locking Insert

Background Custom formulated steel tubing High carbon content Custom drawn Specifications Diameter Locking System

End Tube Locking Lugs

Tube Stops High carbon steel Heat treated Zinc Dichromate coated Inset thread lock

1" 25.4 mm LeverLoc

Scabbards Duty Federal® SideBreak®

Grip Yellow Zinc Dichromate Textured powdered paint Foamed vinyl grip Wavemaster grip Protective front collar DuraTec® grip

Shafts Airweight® Black Chrome Chrome Electroless

Extension Grooves

Retention Stainless retention post Music wire retention clip Aluminum Clip Assembly

Lockup Lever controlled lugs Eccentric locking groove

Aluminum Tubing 7075 T6

Nylon Locking Insert

Cap Yellow Zinc Dichromate Textured powdered paint O-ring sealed

Tip Extended Carbon steel core Extension grooves (3) Replaceable

Steel Tubing 4140 49-57 RC 238,000 PSI tensile 215,000 PSI yield

Retention Collar

Control Grip

Duty, SideBreak® and Federal® Scabbards retain retracted or expanded LeverLoc Batons.

Middle Tube Distinctive appearance Reduced diameter alignment collar Locking Lugs Stainless steel Heat treated

Federal ®

LeverLoc Batons

L16

L21

L26 SideBreak Cases are available in four finishes.

Foamed vinyl grips are extremely durable and replaceable.

SideBreak

Wavemaster Grips provide a secure hold and increased control.

Injection Molded DuraTec® Grips are permanently bonded to the baton handle.

Airweight* Black Chrome Chrome Electroless

Foam

DuraTec

Wavemaster

FA FB FC FE

DA DB DC DE

WA WB WC WE

Insignia Caps add a mark of distinction to your LeverLoc ® Baton.

* Airweight Batons weigh 45% less than steel models. They are not recommended for uniform duty use.

Duty

®

“Protecting Those Who Protect” LeverLoc

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2006 ASP


Crystal Clear Illumination ®

Brilliant Lifetime LED

Replaceable Battery Pak

Translucent Frame

Auto Tension Tri-Ring® Clip

3 MODES • CONSTANT-ON • ALERT STROBE • INTERNATIONAL SOS

Ice lights add translucent panels and a replaceable battery pak to the award winning Wearable® design. A brilliant white lifetime LED is activated by a 3-Mode Softouch® switch. Solid state reliability that is conveniently clipped. Ice lights provide vivid, high tech illumination where and when you need it.


ASP Ice . . . Simply Brilliant

PowerPak® Lithium Battery

The distinctive ASP swirl indicates a 3-mode architecture.

Auto Tension Retaining Bar Custom Integrated Circuit Board

Injection Molded Frame Lifetime LED 3-Mode Switch

Tri-Ring® Clip features a coil spring for smooth opening and automatic closing.

Translucent Polycarbonate Panel

LED COLOR

Background Replaceable battery pak Lifetime LED replacement Designed to professional standards Extremely bright Injection molded frame Integral retention clip Specifications Length 2.67" 67.8 mm Width .95" 24.1 mm Thickness .34" 8.6 mm Weight .41 ounces 11.6 grams System 6 volt Output Brilliant white light Produced to aerospace tolerances Panels Translucent Polycarbonate Brilliant colors Frame Polycarbonate Water resistant Precision balanced No sharp edges Fitted battery compartment

Softouch ® Switch Cover Minimal power requirements Minimal heat generation Non-deteriorating light Shockproof Vibration proof Impact proof Low voltage requirement Water clear acrylic lens Even light distribution (no hot spots) Free lifetime replacement

PowerPak Replaceable Polymer encased Uni-directional Ejection post 6 volt Lithium system Ten year shelf life Low temperature certified Leak proof Vibration resistant

Red

Retention Clip Triangular profile Coil spring tensioned Wide mouth Automatic attachment

Architecture Side mounted switch Modes: Constant-On (One hour auto off) Alert Strobe International SOS Santoprene switch cover One hand operation

Warranty Limited Lifetime

Lamp Lifetime LED High luminous intensity High efficiency Visible over one mile 100,000 hour rating Semiconductor based 180° viewing radius Solid state

Amber

®

Clear

Genuine ASP Look for the colored panels and contrasting frame.

Blue

ASP Ice®. . . the crystal clear, 3-mode light.

®

“Simply Brilliant” Ice

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2003 ASP


®

. . . Brilliant Illumination

Elite Wearable Lights® introduce PowerPak® technology to high intensity personal lighting. They are bright, reliable and conveniently clipped. The Elite series incorporates a Softouch ® switch and integrated circuit with constant-on, alert strobe and SOS modes. A replaceable battery pak is added to the award winning 3-Mode design.

Brilliant Lifetime LED

Constant-On, Alert & SOS

Replaceable Battery Pak

Forged Aluminum Body

Auto Tension Tri-Ring® Clip

True Color

High Visibility

These lights are a brilliant companion. Constant illumination where and when you need it. The lifetime Elite LED produces a high efficiency, non-deteriorating, solid state beam. It provides soft illumination with a 180° viewing radius that is visible over one mile. Elite. The standard of quality in personal lighting.

3 MODES • CONSTANT-ON • ALERT STROBE • INTERNATIONAL SOS


ASP Elite . . . Simply Brilliant

PowerPak® Lithium Battery

The distinctive ASP swirl indicates a 3-mode architecture.

Auto Tension Retaining Bar Custom Integrated Circuit Board

Injection Molded Frame Lifetime LED 3-Mode Switch LED COLOR

Forged Aluminum Body

Background Replaceable battery pak Lifetime LED replacement Designed to professional standards Extremely bright Forged aluminum body Injection molded frame Integral retention clip Specifications Length 2.67" 67.8 mm Width .95" 24.1 mm Thickness .34" 8.6 mm Weight .44 ounces 12.4 grams System 6 volt Output Brilliant LED light Produced to aerospace tolerances Panels Die struck High strength aluminum alloy Bright dip industrial anodizing 18K Gold plating Frame Engineering grade resin Water resistant Precision balanced No sharp edges Fitted battery compartment

Tri-Ring® Clip features a coil spring for smooth opening and automatic closing.

Softouch® Switch Cover PowerPak Replaceable Polymer encased Uni-directional Ejection post 6 volt Lithium system Ten year shelf life Low temperature certified Leak proof Vibration resistant

Solid state Minimal power requirements Minimal heat generation Non-deteriorating light Shockproof Vibration proof Impact proof Low voltage requirement Water clear acrylic lens Even light distribution (no hot spots) Free lifetime replacement

Architecture Side mounted switch Modes: Constant-On (One hour auto off) Alert Strobe International SOS Santoprene switch cover One hand operation

Retention Clip Triangular profile Coil spring tensioned Wide mouth Automatic attachment Available Custom Options Laser engraveable ChromaColor®

Lamp Lifetime LED High luminous intensity High efficiency Visible over one mile 100,000 hour rating Semiconductor based 180° viewing radius

Blue

Violet

Pewter

Warranty Limited Lifetime

Genuine ASP Look for the colored panels and contrasting frame.

®

Red

Black

Gold

ASP Elite® . . . the high intensity, forged aluminum, 3-mode light. ®

“Simply Brilliant” Elite

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2002 ASP


The ASP Mirage introduces a new technology to personal lighting products. It is bright, reliable and conveniently clipped. The shockproof Mirage will become your constant companion. A Lifetime of Light ®. . . where and when you need it. Lifetime LEDs produce a high efficiency, non-deteriorating solid state beam. They provide soft illumination with a 180˚ viewing radius that is visible over one mile. This is a lighting system so advanced that it is guaranteed. An LED and Batteries for a lifetime of use. ®

W E A R A B L E

. Brilliant Lifetime LED . Lifetime Battery Replacement . Softouch® Pressure Switch . Translucent Frame . Auto Tension Tri-Ring® Clip

A

LIFETIME

OF

LIGHT

L I G H T


ASP Mirage . . . Simply Brilliant Tri-Ring ® Clip Auto Tension Retaining Bar Injection Molded Frame

Dome Switch

Lifetime LED

Tri-Ring® Clip features a coil spring for smooth opening and automatic closing.

Lithium Batteries Translucent Body

LED COLOR

Softouch ® Switch Cover

Background Lifetime battery replacement Lifetime LED replacement Designed to professional standards Extremely bright Injection molded frame Integral retention clip Specifications Length 2.67" 67.8 mm Width .95" 24.1 mm Thickness .34" 8.6 mm Weight .46 ounces 13.0 grams System 6 volt Output Brilliant White light Produced to aerospace tolerances Panels Translucent High strength polycarbonate Brilliant colors Frame Polycarbonate Water resistant Precision balanced Solid brass insert No sharp edges

Batteries 3 volt Lithium (two) Ten year shelf life Low temperature certified Leak proof Vibration resistant Fitted battery compartment Free lifetime replacement

Minimal power requirements Minimal heat generation Non-deteriorating light Shockproof Vibration proof Impact proof Low voltage requirement Water clear acrylic lens Even light distribution (no hot spots) Free lifetime replacement

Architecture Side mounted switch Intermittent Tactile dome activation Santoprene switch cover One hand operation

Retention Clip Triangular profile Coil spring tensioned Wide mouth Automatic attachment

Lamp Lifetime LED High luminous intensity High efficiency Visible over one mile 100,000 hour rating Semiconductor based 180° viewing radius Solid state

Warranty Limited Lifetime

Amber

White

Genuine ASP Look for the colored panels and contrasting frame.

Red

Blue

Mirage® . . . crystal clear illumination.

®

“Simply Brilliant” Mirage

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2001 ASP


Patriot Lights ... in appreciation of those who secure our freedom

The Patriot® was the first ASP Wearable Light® to employ ChromaColor®. This striking new process fuses rich colors into the pores of aerospace aluminum. The vibrant pigments are as durable as the forged metal panels that they become a part of. In the history of the men and women who protect and serve this nation are stories of incredible personal sacrifice and valor. It is this spirit of commitment and selflessness that are symbolized by the Patriot Series. Each Patriot light incorporates a white lifetime LED with a high efficiency, non-deteriorating, solid state beam of incredible brightness. Each light provides soft illumination with a 180° viewing radius that is visible over one mile.

Patriot lights are bright, reliable and conveniently clipped. Each light symbolizes an appreciation for the men and women whose commitment to duty and country secure the freedoms that we cherish. Made in the United States by ASP on the most sophisticated computer driven production machines in the industry, each model in the Patriot Series is guaranteed for a Lifetime of Light ®.


The

Patriot Series ...

in appreciation of those who secure our freedom Balance Weight Auto Tension Retaining Bar Dome Switch

Injection Molded Frame

Tri-Ring® Clip features a coil spring for smooth opening and automatic closing.

Lifetime LED Lithium Batteries Forged Aluminum Body

LED COLOR

Softouch® Switch Cover

Background Lifetime battery replacement Lifetime LED replacement Designed to professional standards Extremely bright Forged aluminum body Injection molded frame Integral retention clip

Batteries 3 volt Lithium (two) Ten year shelf life Low temperature certified Leak proof Vibration resistant Fitted battery compartment Free lifetime replacement

Specifications Length 2.67" 67.8 mm Width .95" 24.1 mm Thickness .34" 8.6 mm Weight .47 ounces 13.4 grams System 6 volt Output Brilliant LED light Produced to aerospace tolerances

Architecture Side mounted switch Intermittent Tactile dome activation Santoprene switch cover One hand operation

Vibration proof Impact proof Low voltage requirement Water clear acrylic lens Even light distribution (no hot spots) Free lifetime replacement Retention Clip Triangular profile Coil spring tensioned Wide mouth Automatic attachment Available Custom Options Laser engraveable Warranty Limited Lifetime

Lamp Lifetime LED High luminous intensity High efficiency Visible over one mile 100,000 hour rating Semiconductor based 180° viewing radius Solid state Minimal power requirements Minimal heat generation Non-deteriorating light Shockproof

Panels Die struck High strength aluminum alloy Bright dip industrial anodizing Frame Engineering grade resin Water resistant Precision balanced Solid brass weight No sharp edges

ASP ChromaColor ® . . . the high intensity, forged aluminum Lifetime Light ®.

52524

52525

52523 Genuine ASP Look for the colored panels and contrasting frame.

®

“Simply Brilliant” Patriot

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2004 ASP


®

. . . for a Lifetime of Light •

Brilliant Lifetime LED

Lifetime Battery Replacement

Softouch ® Pressure Switch

Forged Aluminum Body

Auto Tension Tri-Ring® Clip

True Color White Crystal

ASP Sapphire lights introduce a new technology to personal lighting products. They are bright, reliable and conveniently clipped. Shockproof Wearable Lights® will become your constant companion. A Lifetime of Light ®. . . where and when you need them. The Lifetime LED produces a high efficiency, non-deteriorating solid state beam. It provides soft illumination with a 180˚ viewing radius that is visible over one mile. This is a lighting system so advanced that it is guaranteed. An LED and Batteries for a lifetime of use.


ASP Sapphire . . . Simply Brilliant Balance Weight Auto Tension Retaining Bar Dome Switch Injection Molded Frame Lifetime LED

Tri-Ring® Clip features a coil spring for smooth opening and automatic closing.

Lithium Batteries Forged Aluminum Body

Softouch® Switch Cover

LED COLOR

Background Lifetime battery replacement Lifetime LED replacement Designed to professional standards Extremely bright Forged aluminum body Injection molded frame Integral retention clip

Batteries 3 volt Lithium (two) Ten year shelf life Low temperature certified Leak proof Vibration resistant Fitted battery compartment Free lifetime replacement

Specifications Length 2.67" 67.8 mm Width .95" 24.1 mm Thickness .34" 8.6 mm Weight .47 ounces 13.4 grams System 6 volt Output Brilliant LED light Produced to aerospace tolerances

Architecture Side mounted switch Intermittent Tactile dome activation Santoprene switch cover One hand operation

Panels Die struck High strength aluminum alloy Bright dip industrial anodizing Frame Engineering grade resin Water resistant Precision balanced Solid brass weight No sharp edges

Shockproof Vibration proof Impact proof Low voltage requirement Water clear acrylic lens Even light distribution (no hot spots) Free lifetime replacement Retention Clip Triangular profile Coil spring tensioned Wide mouth Automatic attachment

Blue

Violet

Available Custom Options Laser engraveable ChromaColor ®

Lamp Lifetime LED High luminous intensity High efficiency Visible over one mile 100,000 hour rating Semiconductor based 180° viewing radius Solid state Minimal power requirements Minimal heat generation Non-deteriorating light

Warranty Limited Lifetime Pewter

Red

Genuine ASP Look for the colored panels and contrasting frame.

Black

ASP Sapphire®. . . the high intensity, forged aluminum Lifetime Light ®. Gold

®

“Simply Brilliant” Sapphire

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2001 ASP


TACTICAL TRIAD

2

The Tactical Triad Baton Light is precision machined from high strength aerospace aluminum. A proprietary matte black hardcoat anodizing is accented by an extremely durable foamed vinyl grip. The leak proof CR123A power cell has a ten year shelf life. The parabolic reflector is metalized and gasket sealed. It produces a brilliant white penetrating beam of incredible brightness. The rotary switch activation system of the Tactical Triad is positive, yet secure from accidental contact. This brilliant high intensity auxiliary light can be attached to any of the 3 million ASP Tactical Batons® in operation worldwide.

170 Lumens (ANSI Standard)

1 Hour Run TIme

Hardcoat Anodized

Attaches to Any F or L Series Baton

2.9" Long

One CR123A


ASP Tactical Triad . . . Simply Brilliant Lens Gasket

O-Ring Seal High Output Cree LED

O-Ring Sealed Connector

Battery Tube

Parabolic Reflecting Chamber

Lexan® Lens

Rotational Switch

Background Designed to professional law enforcement standards Aerospace aluminum construction Precision machined No sharp edges O-ring sealed for maximum water resistance Distinct profile Specifications Length Diameter Weight System Flashlight Output

2.9" 73.7 mm 1" 25.4 mm 2.8 ounces 79.4 grams (with battery) 3 volt 170 lumens

Body 6061 T6 high strength aluminum Matte black hardcoat Coated threads for durability Exterior and interior scratch and corrosion protection Foamed vinyl grip Power Cell 3 volt Lithium CR123A (one) PTC protected Safety vent Ten year shelf life 1 hour continuous run time Leak proof Vibration resistant

Baton Attachment

Switch Assembly

Foamed Vinyl Grip

Rotary Switch Front mounted Quick and positive switch location under stress PC board positive circuit contact Sensitive and quiet switch activation Computer micro switch controlled Reflector Assembly Extremely durable Non-dulling metalized surface Computer calculated parabola Long distance penetrating beam Room illuminating halo Water clear Lexan lens (IR coated) Gasket sealed

The Tactical Triad ® attaches to any of 3 million ASP Batons in service worldwide.

LED Assembly Proprietary heat management Custom driver Smart chip technology Gasket sealed Scabbards Injection molded Elastic sidewall technology Warranty Limited Lifetime

Federal ® and Duty Scabbards protect and securely retain the Tactical Triad.

SideBreak ® Scabbards for the Tactical Triad are available in four finishes.

®

“Protecting Those Who Protect” Tactical Triad

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2006 ASP


The Ten Reasons Why

American Made • $6 million fully automated production • 1.5 second production cycle • 14 inspections • Lifetime replacement guarantee

3 Modes • Constant-On (Automatic Off after one hour) • Alert Strobe • International SOS

Positive Interleaf Switch (Patent 6,190,018) • Prevents shorts • Assures positive contact • Aggressively enforced patent

Replaceable Battery Pak • Industry first • Ongoing sales opportunity • 50% of all light purchases • Supports a product family

Integral Keyring (Patent 6,357,890) • Rapid attachment • Easy removal • Aggressively enforced patent

Recognized Design (Patents D419,251 · D422,731 · D441,473) • Well recognized catalog presence • Associated with quality • Distinctive

Metal Light • Forged aluminum panels • Mirror polished surface • Military specification finish

Ten Reasons

Widest Selection in the Industry • $9.95 Mirage® to $19.95 Classic ® • 3 activation systems • 3 Crystal™ (LED) colors • 6 translucent panel finishes • 10 aluminum panel finishes • Forged brass panels

Replacement Guarantee • Lifetime frame • Lifetime Crystal • Lifetime battery (Sapphire® & Mirage®)

Price Protection • MAP product line • $5.00 catalog premium • $9.95 Mirage (open pricing)

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . www.asp-usa.com

© 2003 ASP


TRIAD

4

Triad lights form the foundation of the ASP Performance Series of professional illumination tools. A look at the design, construction, fit, finish and illumination tells you that these are not consumer lights. They are not designed to be “just good enough.” ASP lights were conceived, refined and built to be the finest, brightest, most advanced law enforcement lighting tools in the industry.

· 265 Lumens (ANSI Standard) · 1.5 Hour Run Time · Hardcoat Anodized · Foamed Vinyl Grip · Easily Attached Pocket Clip · Intermittent, Locked, Constant-On Switch · 5.5" Long · Two CR123A · Black Accessory Case

Triad lights are machined from bars of 6161 T6 aerospace aluminum. They are hardcoat anodized in a proprietary matte black finish. Each light has a foamed vinyl grip like the finest Tactical Baton.® Each Triad incorporates the ASP designed three position intermittent, locking, constant-on switch. Light engines are from the latest generation of Cree high performance LEDs. They are from a binning selected for its pure white chromonicity and high lumen output. The individual serial number is laser engraved into each light. Batteries are 3v Lithium CR123A primary cells. The shatterproof lens is water clear polycarbonate. A clip groove is machined into the lens and switch end of each light. A heat treated pocket clip snaps into either groove. Whether judged by brightness, features or durability, the ASP Triad is the finest law enforcement illumination tool on the market.


ASP Triad . . . Simply Brilliant Parabolic Reflecting Chamber

Computer Micro Switch

O-Ring Seal

Lens Gasket Overmolded Activation Button Lexan® Lens

High Output Cree LED

Background Designed to professional law enforcement standards Aerospace aluminum construction Precision machined No sharp edges O-ring sealed for maximum water resistance Distinct profile Specifications Length Diameter Weight System Flashlight Output

5.5" 139.7 mm 1.4" 35.6 mm 5.4 ounces 153.1 grams (with batteries) 6 volt 265 lumens (ANSI Standard)

Battery Tube

Front Clip Groove

Rear Clip Groove

Foamed Vinyl Grip

Power Cells Two 3 volt Lithium (CR123A) PTC protected Safety vent Ten year shelf life Two hours continuous run time Leak proof Vibration resistant

Pocket Clip Detachable

Three Position Rotary Sleeve

Reflector Assembly Parabolic Extremely durable Computer calculated ray traces Long distance penetrating beam Room illuminating halo

Gasket sealed

LED Assembly Proprietary heat management Custom driver Smart chip technology Gasket sealed

Power Cell Tube Foamed vinyl grip O-ring sealed

Body 6061 T6 high strength aluminum Satin black hardcoat Coated threads for durability Exterior and interior scratch and corrosion protection Foamed vinyl grip Front clip groove Rear clip groove

Circuit Board Contact

Locking Switch Back mounted Quick and positive switch location under stress O-ring sealed activation button Locked (center) Constant on/off switch activation (right) Intermittent switch activation (left) O-ring sealed switch cover PC board positive circuit contact Sensitive and quiet switch activation Computer micro switch controlled Self-cleaning (no carbon buildup) Fail safe (backup) switch circuits Replaceable modular switch assemblies Optional intermittent switch activation O-ring sealed connection to the light body Rotate one full turn to prevent accidental activation

Belt Cases Injection molded Elastic technology Accessory Case Black Ballistic Weave Warranty Limited Lifetime

SideBreak® and Duty Cases protect and securely retain the Triad.

Lithium Power Cells are available in packs of 2 or 12.

° Rotating the actuator to the left provides intermittent light.

The center position locks the Triad against accidental activation.

• Positioning the actuator to the right provides constant illumination.*

®

“Protecting Those Who Protect” Triad

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2006 ASP


TUNGSTEN

®

When designing the world’s finest safety light, there can be no compromise to quality. Performance is paramount. Reliability is king. Small, powerful, incredibly bright. These were the criteria for the Tungsten by ASP.

· Hardcoat Anodized · Easily Attached Pocket Clip · Intermittent, Locked, Constant-On Switch · Blue Accessory Case Tungsten 12 · 170 Lumens (ANSI Standard) · 1 Hour Run Time · 3.9" Long · One CR123A Tungsten 22 · 200 Lumens (ANSI Standard) · 2 Hour Run Time · 5.3" Long · Two CR123A

The reduced form factor of the Tungsten LED is made possible by a revolutionary new light engine. ASP research developed a unique technology which produces brilliant white pre-focused light. A constant current driver is combined with a mathematically precise collimating cone to achieve unparalleled output. Advanced optics are coupled with precision machined high strength aerospace aluminum. All surfaces are then anodized with a proprietary matte black hardcoat finish. Powered by high density, leak proof CR123A PTC Lithium power cells, the Tungsten provides a ten year shelf life. The domed lens and tri-mode Switch Assembly are both o-ring sealed. The Tungsten is blindingly bright, yet totally secure. A center locking position guards against accidental activation. Turned to the right, the switch provides constant illumination. To the left it is intermittent. A clip groove is machined into the lens and switch end of each light. A heat treated pocket clip snaps into either groove. The Tungsten LED. Innovative design. Unparalleled performance. Exclusive optics. Tri-mode switching. A light without equal. Typically ASP.


ASP Tungsten. . . Simply Brilliant Parabolic Reflecting Chamber

Switch Circuit Board

O-Ring Seal

Battery Tube

Computer Micro Switch

Lens Gasket Overmolded Activation Button

Lexan Lens

®

High Output Cree LED

LED Circuit Board

Front Clip Groove

Driver Circuit Board

Battery Circuit Board

Fine Line Knurling

Background Designed to professional law enforcement standards Aerospace aluminum construction Precision machined No sharp edges O-ring sealed for maximum water resistance Distinct profile

Power Cells 3 volt Lithium (CR123A) PTC protected Safety vent Ten year shelf life Leak proof Vibration resistant

Specifications (Tungsten 1) Length 3.9" 99.1 mm Diameter .83" 21.2 mm Weight 2.2 ounces 62.4 grams (with battery) System 3 volt Flashlight Output 60 lumens Run Time 1.5 hours

Locking Switch Back mounted Quick and positive switch location under stress O-ring sealed activation button PC board positive circuit contact Sensitive and quiet switch activation Computer micro switch controlled Self-cleaning (no carbon buildup) Fail safe (backup) switch circuits Replaceable modular switch assemblies Rotate one full turn to prevent accidental activation Locked (center) Constant on/off switch activation (right) Intermittent switch activation (left) O-ring sealed switch cover

Specifications (Tungsten 2) Length 5.3" 134.6 mm Diameter .83" 21.2 mm Weight 3.2 ounces 90.7 grams (with batteries) System 6 volt Flashlight Output 80 lumens Run Time 3 hours Body 6061 T6 high strength aluminum Matte black hardcoat Coated threads for durability Exterior and interior scratch and corrosion protection Front clip groove Rear clip groove

Rear Clip Groove

Three Position Rotary Sleeve

Reflector Assembly Extremely durable Non-dulling metalized surface Computer calculated parabola Long distance penetrating beam Room illuminating halo Water clear Lexan lens Gasket sealed LED Assembly Proprietary heat management Custom driver Smart chip technology Gasket sealed Belt Cases Duty Executive Warranty Limited Accessory Case Blue Ballistic Weave

Lithium Power Cells are available in packs of 2 or 12. Duty

Executive

Clip Set Detachable pocket clip Detachable lanyard loop Adjustable wrist lanyard

Locking Switch

Duty and Executive cases protect and securely retain the Tungsten®.

Intermittent

Locked

Constant-On

®

“Protecting Those Who Protect” Tungsten

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2006 ASP


LITHIUM BATTERIES

CR123A Lithium primary cells are the international standard for powering tactical lighting products. An extremely dense energy source, Lithium Batteries have a ten year shelf life. They function in a wide range of temperatures and environments. Lithium power cells are leakproof and vibration resistant. They provide the most dependable source of power currently available for handheld professional lights. ASP Lithium cells incorporate a positive temperature coefficient (PTC) protection circuit and safety vent. The system prevents instability in the event a cell overheats or should rapidly discharge as the result of a short. ASP Lithium Batteries are available in a 3 volt single cell or 6 volt welded two cell stick. Batteries are packaged in a two cell clamshell or 12 cell box.

BATTERY BOX (12)

BATTERY STICK

®

“Protecting Those Who Protect” Lithium Batteries

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2008 ASP


LE Defenders SS.qxd:IT-Defenders SS_4pg r2 LE2.qxd

12/8/08

12:08 PM

Page 1

LAW ENFORCEMENT

DEFENDERS

Palm, Key and Street Defenders are readily carried in the waistband. Each incorporates the field proven performance that has made ASP Defenders the first choice of law enforcement professionals worldwide.

Street Defender Key Defender

Palm Defender


LE Defenders SS.qxd:IT-Defenders SS_4pg r2 LE2.qxd

12/8/08

12:08 PM

Page 2

ASP Defenders . . . Palm, Key & Street O-Ring Sealed Tip The world’s smallest aerosols. Test ® Training or Heat ® Oleoresin Capsicum Inserts are replaceable.

Precisely Machined Dispersion Port

Aerospace Aluminum Body

Select the Palm Defender ® for discrete control. The Key Defender ® provides increased capacity. The Street Defender ® is designed for uniform or tactical defense.

Solid Brass Actuator Heat Treated Split Rings

Background Designed to professional law enforcement standards Aerospace aluminum construction Precision machined No sharp edges O-ring sealed Interchangeable components Replaceable aerosol Inserts Specifications Palm Key Street Length 4.5" 5.75" 6.5" Diameter 0.625" 0.625" 0.75" Weight 1.8 ounces 2 ounces 3 ounces System Straight line activation Body 6061 T6 aerospace aluminum construction Fine line knurling Bright dip industrial anodizing Optional textured powdered paint finish Optional electroless nickel finish Coated threads for durability Safety Extremely secure Rapidly released Stainless steel hinge pin O-ring retained Replaceable safety Precision ground Injection molded Delrin® Wraparound design Positive activation blockage Non-engagement indication

Detachables allow convenient key separation.

O-Ring Sealed Cap

The Safety (shown in the off position, ready to activate) is rapidly released.

The wraparound Safety (shown in the on position) is engaged and secure.

Activation Keyring attachment Swivel design Solid brass actuator Requires two distinct movements to activate Tip O-ring sealed Tapered stem seat Precision machined dispersion port Cap O-ring sealed Blind hinge pin hole Split Rings Progressively sized Extra heavy wire Heat treated for toughness Black chrome plated Inserts Readily replaceable World’s smallest aerosol cans Seamless aluminum Impact extruded Precision spring valve Extra long ferrule Gasket sealed Horizontal discharge Cone-shaped dispersion Test Inert Training module Heat Oleoresin Capsicum 2 Million Scoville Heat Units 10% formulation Optional custom formulations Laser engraved expiration date

Palm Defender Inserts 3 grams Three one-half second bursts Effective range three feet Key Defender Inserts 4 grams Six one-half second bursts Effective range five feet Street Defender Inserts 13 grams Thirty one-half second bursts Effective range ten feet

Black

Electroless

Textured

Repair Maintenance Kit Warranty Limited Lifetime

Palm Defender Inserts Defender Inserts are compact, easily replaced and date coded to assure reliability

Key Defender Inserts

Street Defender Inserts

®

“Protecting Those Who Protect” Law Enforcement Defenders

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2003 ASP


PERSONAL SAFETY

DEFENDERS

Key Key Defender Defender

Palm Palm Defender Defender

®

Police Strength

Low Profile

Easily Carried

Quick Firing

ASP products are designed to professional law enforcement standards. They have gained a worldwide reputation for performance. This same precision technology has created a new generation of personal safety devices. The ASP Defender ® Series is precision machined from high strength aerospace aluminum. Bright dip industrial anodizing is accented by an injection molded Delrin ® safety. The solid brass keyring swivel retains two heat treated, black chrome plated split rings. Both the dispersion tip and retention cap are o-ring sealed. The safety is positive and secure. Release requires two distinct movements. Straight line activation places a cone-shaped spray on target . . . even in the dark. The result is a low profile, devastatingly effective aerosol dispenser. Each Defender combines the innovative design and unparalleled manufacturing expertise of ASP. O-ring sealed for integrity. Performance tested for function. Individually date coded for reliability. ASP Defenders are unmatched in function, durability or performance.


ASP Defenders . . . Your Key to Personal Safety O-Ring Sealed Tip

The world’s smallest aerosols. Test ® Training or Heat ® Oleoresin Capsicum Inserts are replaceable.

Precisely Machined Dispersion Port

Select the Palm Defender® for discrete personal safety. The Key Defender ® provides increased capacity.

Aerospace Aluminum Body

Solid Brass Actuator Heat Treated Split Rings

Background Designed to professional law enforcement standards Aerospace aluminum construction Precision machined No sharp edges O-ring sealed Interchangeable components Replaceable aerosol Inserts Specifications Palm Key Length 4.5" 5.75" Diameter 0.625" 0.625" Weight 1.8 ounces 2 ounces System Straight line activation Body 6061 T6 aerospace aluminum construction Fine line knurling Bright dip industrial anodizing Optional 18K Gold finish Coated threads for durability Safety Extremely secure Rapidly released Stainless steel hinge pin O-ring retained Replaceable safety Injection molded Delrin ® Wraparound design Positive activation blockage Non-engagement indication

Detachables allow convenient key separation.

O-Ring Sealed Cap

The wraparound Safety (shown in the on position) is engaged and secure.

Palm Defender Inserts Activation 3 grams Keyring attachment Three one-half second bursts Swivel design Effective range three feet Solid brass actuator Requires two distinct movements to activate Tip Key Defender Inserts O-ring sealed 4 grams Tapered stem seat Six one-half second bursts Precision machined dispersion port Effective range five feet Cap Repair O-ring sealed Maintenance Kit Blind hinge pin hole Warranty Split Rings Limited Lifetime Progressively sized Extra heavy wire Heat treated for toughness Black chrome plated Palm Defender Inserts Inserts Readily replaceable World’s smallest aerosol cans Seamless aluminum Impact extruded Precision spring valve Extra long ferrule Gasket sealed Horizontal discharge Key Defender Inserts Cone-shaped dispersion Test Inert Training module Heat Oleoresin Capsicum 2 Million Scoville Heat Units 10% formulation Optional custom formulations Defender Inserts are compact, Laser engraved expiration date easily replaced and date coded to assure reliability.

The Safety (shown in the off position, ready to activate) is rapidly released.

Black

Red

Gold

Violet

Pewter

Blue

®

“Protecting Those Who Protect” Personal Safety Defenders

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2000 ASP


TACTICAL DEFENDER •

Police Strength

Low Profile

Easily Carried

Quick Firing

`®

The fine line between OC and the need for a baton can be crossed in an instant by a determined assailant. The Tactical Defender allows an officer to bridge that gap by placing two proven control tools conveniently in hand. Low profile. Compact. Rapidly deployed. The straight line activation system of the Defender OC is combined with the proven dependability of the ASP Tactical Baton®.

Airweight® offers a 45% weight reduction with 98% of the striking potential of steel.

Black Chrome provides the most durable and corrosion resistant black baton finish available.

Chrome delivers a high lustre finish for increased visibility under low light conditions. Electroless® is the most corrosion resistant finish. It is well suited to high humidity environments.

The thumb safety of the Tactical Defender employs a stainless steel post to block activation. Two distinct movements are required to disengage and then discharge a 10% concentration of Oleoresin Capsicum directly on target. Reapplication of the safety at any time is rapid and reflexive should the ASP Baton be required. The Tactical Defender can be carried in all Series 26 ASP SideBreak, Federal and Duty Scabbards. Replaceable Heat® Inserts dispense two million Scoville Heat Units of OC in a cone shaped pattern. Inert (Test®) Inserts are ideal for training. An adapter allows the use of Palm® Inserts in situations where a reduced volume of Heat or Test is desired.


ASP Tactical Defender . . . Straight Line Protection O-Ring Sealed Connector

Safety Pin

Safety Replaceable Insert

Retaining Guide

Activator

Aerospace Aluminum Body

®

The Tactical Defender may be purchased as a stand alone unit that attaches to any ASP Baton. It is also available as part of the Fusion Series. This highly successful baton combines an F16 or L16 with the Tactical Defender creating one compact, easily employed control tool.

Foamed Vinyl Grip

Precision Machined Dispersion Port

Dispersion Cap

The Safety (shown in the off position, ready to activate) is rapidly released.

Background Designed to professional law enforcement standards Aerospace aluminum construction Precision machined No sharp edges O-ring sealed Interchangeable components Replaceable aerosol Inserts Specifications Length 4" 101.6 mm Diameter 1" 25.4 mm Weight 3.3 ounces 93.6 grams System Straight line activation Body 6061 T6 aerospace aluminum construction Matte black hardcoat anodizing Coated threads for durability Safety Extremely secure Rapidly released Stainless steel safety pin Replaceable Machined Delrin® Slide away design Positive activation blockage Activation Concentric ring slide Requires two distinct movements

Dispersion Cap O-ring sealed May be used as a baton cap Tapered stem seat Precision machined dispersion port Tactical Black Optional Gold Band Optional Silver Band Inserts Readily replaceable World’s smallest aerosol cans Seamless aluminum Impact extruded Precision spring valve Extra long ferrule Gasket sealed Horizontal discharge Cone-shaped dispersion Laser engraved expiration date (Heat) Test ® Inert Training module Heat ® Oleoresin Capsicum 2 Million Scoville Heat Units 10% formulation Optional custom formulations

Palm Defender ® Inserts 3 grams Three one-half second bursts Effective range three feet Tactical Defender Inserts 7 grams 10 one-half second bursts Effective range five feet Repair Maintenance Kit Warranty Limited Lifetime

Tactical Defender Inserts

Palm Defender Inserts

Defender Inserts are compact, easily replaced and date coded (Heat only) to assure reliability.

®

SideBreak Scabbards protect and securely retain the Tactical Defender. Palm Defender Conversion Tube ®

“Protecting Those Who Protect” Tactical Defender

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2006 ASP


ALUMINUM HANDCUFFS ASP Chain, Hinge and Rigid Handcuffs set a new standard for police duty restraints. Their hardened stainless steel frame is lightweight, yet incredibly strong. Their polymer overmold has radiused edges and permanent color. The cuffs incorporate double sided keyways and replaceable Lock Sets. A high contact bow face allows positive application. The conical bow profile results in a cuff that fits the largest range of wrists in the industry.

ASP Aluminum Handcuffs improve on this revolutionary design. Alloy bows are hot forged to shape, profile trimmed and precision machined. Each bow is then hardcoat anodized with a matte black finish. Finally, the cuff is laser engraved with the date of manufacture and a unique serial number. The result is an incredibly lightweight, matte black handcuff that incorporates all of the advantages of traditional ASP restraints.


ASP Aluminum Handcuffs . . . the Lighter Side of Control Reinforcing Ribs

Pivot Bushing

Bow

Pivot Pin Serial Number

High Contact Bow Face

Cheek Plates

No Sharp Edges Polymer Overmold

Unitized Stainless Steel Frame

Bow Track Deep Set Ratchet Teeth

Replaceable Lock Sets are available in one, two and three pawl designs.

Lock Set Release Beveled Double Lock Slot

Frame Interlock

Bow Guides

Double Lock Slot Lock Bar (Pawl)

Swivel Collar

Swivel

Stainless Security Plate

Recessed Keyway

Lock Spring Lock Spring Tip

Welded Chain

Double Lock Bar (Yellow)

Security Post

Chain cuffs are flexible and more easily applied during a confrontation. Hinge cuffs provide more restricted control of large subjects. Rigid cuffs provide added security during transport.

Keyway

Hinge Link

Background Precision formed Stainless steel frame * Polymer overmold * High contact face No sharp edges * Permanent color options Extremely lightweight * Interchangeable Lock Set * Recessed keyway Two-sided double lock * Double lock indicator (colored) * Two-sided lock release * One-direction single and double lock release ( * ) A Patent Pending exclusive ASP feature

Specifications Length Chain Hinge Rigid Width Weight Chain Hinge Rigid System Construction Edge Radius

9.4" 9.2" 9.2" 3.125"

239 mm 234 mm 234 mm 79 mm

7 ounces 198 grams 8.5 ounces 241 grams 10.7 ounces 303 grams Replaceable Lock Set Overmolded stainless steel .035" minimum (1 mm)

Frame Computer designed Flex Frame Technology Surgical stainless steel Precision die struck Reinforcing ribs Bow guides Interlocking cheek plates Unitized assembly Polymer overmold Permanent color

Chain Link Stainless steel chain Free rotating swivel Reinforcing swivel collar Hinged Stainless steel links Four point rotation Rigid Stainless pivot bars (2) Two point rotation Dual extension locking Automatic rigidity Lock Set Replaceable Dual keyways Stainless security block Advanced Technology Cases are specifically designed Stainless security posts for the ASP Tactical Handcuff Series of restraints. Dual double lock slots Color coded double lock indicator Dual release lock bar (pawl) One pawl (Yellow) Two pawl (Blue*) Three pawl (Green) Single spring double lock bar Hardened keyways *

Requires a Custom Key

Bow Conical geometry Integral frame track Deep set teeth High contact face Serial numbered Stainless pivot pin Warranty Limited Lifetime

®

“Protecting Those Who Protect” Aluminum Handcuffs

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2008 ASP


CHAIN HANDCUFFS

ASP Chain Handcuffs provide a major advance in both the design and construction of wrist restraints. Frame geometry is the result of extensive computer modeling and simulation analysis. Strength potential has been maximized through use of an interlocking, unitized frame. The cuff structure is forged from high strength stainless steel on custom built, high speed, progressive dies. Each restraint is then overmolded with ordnance grade polymer under 75 tons of pressure. The Lock Assembly is unitized and replaceable. The Chain Handcuff was designed in the field. Input came from officers and instructors in over 80 nations where ASP currently conducts training. As a result, this ASP design incorporates the practical features most requested by officers on the street. A stainless steel handcuff that weighs less than standard designs. A flat contact bow improves application. Complex “keyhole up” training procedures are no longer necessary. There is a keyway and double lock slot on each side of each restraint. A double lock warning bar is readily visible. Both double and single locks are released by turning the key in a single direction. The frame geometry, deep set teeth and precision smooth action eliminates the need for back loading. Color coding of restraints is now possible. Custom colors are available for agencies, divisions or to designate the security threat of subjects. Lock Assemblies are readily replaced. The Chain Handcuff is a companion to the Tri-Fold ® family of disposable restraints. Each cuff incorporates the innovative design and unparalleled manufacturing expertise of ASP. In design, in construction, in features . . . this is a restraint that is distinctly ASP.


ASP Chain Handcuffs . . . a New Design on Security Reinforcing Ribs

Pivot Bushing

Bow

Pivot Pin Serial Number

High Contact Bow Face

Cheek Plates

No Sharp Edges

Forged aluminum bows are black hardcoat anodized.

Polymer Overmold

Unitized Stainless Steel Frame

Bow Track Deep Set Ratchet Teeth

Lock Set Release Beveled Double Lock Slot

Frame Interlock

Bow Guides

Chain cuffs are flexible and more easily applied during a confrontation. Double Lock Slot Lock Bar (Pawl)

Swivel Collar

Swivel

Stainless Security Plate

Recessed Keyway

Lock Spring Lock Spring Tip

Welded Chain

Double Lock Bar (Yellow)

Replaceable Lock Sets are also available in two, three and slip pawl designs.

Keyway

Background Precision formed Stainless steel frame * Polymer overmold * High contact face No sharp edges * Permanent color options Extremely lightweight * Interchangeable Lock Set * Recessed keyway Two-sided double lock * Double lock indicator (colored) * Two-sided lock release * One-direction single and double lock release Complies with NIJ Standard 0307.01 ( * ) A Patent Pending exclusive ASP feature

Specifications Length Width Weight Steel Aluminum System Construction Edge Radius

9.4" 3.125"

239 mm 79 mm

9 ounces 255 grams 7 ounces 198 grams Replaceable Lock Set Overmolded stainless steel .035" minimum (1 mm)

Frame Computer designed Flex Frame Technology Surgical stainless steel Precision die struck Reinforcing ribs Bow guides Interlocking cheek plates Unitized assembly Polymer overmold Beveled keyways Permanent color

Security Post

Chain Link Stainless steel chain Free rotating swivel Reinforcing swivel collar Lock Set Replaceable Dual keyways Stainless security block Stainless security posts Dual double lock slots Color coded double lock indicator Dual release lock bar (pawl) One pawl (Yellow) Two pawl (Blue*) Three pawl (Green) Slip pawl (Red) Single spring double lock bar Hardened keyways * Requires a Custom Key Bow Conical geometry Integral frame track Deep set teeth High contact face Serial numbered Stainless pivot pin Warranty Limited Lifetime

Advanced Technology Cases are specifically designed for the ASP Tactical Handcuff Series of restraints.

®

“Protecting Those Who Protect” Chain Handcuffs

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2008 ASP


HANDCUFF CASES

ASP Handcuff Cases are a benchmade blend of the finest materials in a series of clean, functional designs. Each case incorporates an integral back pocket and auxiliary handcuff key. Duty, Federal and Double cuff carriers are available in Black, Basketweave, Ballistic and ASPtec速. Duty and Federal cases are produced using inset construction. Double and Combination carriers have elastic side walls. Tactical carriers are constructed from ballistic nylon and incorporate a Velcro flap. Investigator and Combination cases in Black and Ballistic are concealable and attach rapidly to the belt with one-direction snaps. Combo cases retain an LED flashlight or Tactical Baton速 with Chain or Hinge Handcuffs.


Classic Carriers with a Hidden Advantage Double Cuff cases secure restraints with a protective cover and elastic side wall technology.

Duty cases incorporate a protective cover and are constructed with an inset back.

Federal cases have an inset back and pull through retention strap.

Investigator cases are compact and concealable. Each ASP Handcuff case incorporates a key pocket.

Duty

Duty

Chain . Hinge

Double

Federal

Rigid

Chain . Hinge . Rigid

Chain . Hinge

Federal

Investigator

Rigid

Chain . Hinge

Investigator Rigid

Black

56131

56151

56160

56138

56168

56134

56154

Basketweave

56132

56152

56161

56139

56169

Ballistic

56133

56153

56162

56140

56170

56135

56155

ASPtec

56137

56156

56163

56141

56171

Black Basketweave Ballistic

Combo cases place two essential tactical tools (Baton or Light and Handcuffs) conveniently at hand.

ASPtec

Tactical cases retain ASP restraints with an adjustable Velcro cover.

Combo cases combine elastic side wall retention with pull through restraint security.

Combo

Chain . Hinge

Tactical

Chain . Hinge

Ballistic

56136

Tactical Baton/Triad (Black)

Rigid

56150

Tungsten

35632

(Ballistic)

35635

(Black)

65732

(Ballistic)

65735

®

“Protecting Those Who Protect” Handcuff Cases

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2008 ASP


HANDCUFF KEYS

ASP Handcuff Keys are designed to withstand the rigors of long term duty use. Conventional keys are stamped from mild steel. They often break or twist off in a handcuff. These “key jammed” restraints create civil liability and must be destroyed to cut them from the subject’s wrist. ASP Handcuff Keys are precision molded from high strength stainless steel. Each key is heat treated for strength and finished in one of five attractive coatings. A hardcoat lacquer is baked on for added protection. The unique ASP BackSet ® feature allows rapid location of the handcuff keyway. ASP Logo Keys feature distinctive insignias, full color State Seals or custom agency logos. ASP Logo Keys feature premium quality die struck medallions and full color State Seals. Distinctive custom logos are available in brass, nickel silver or color fill. They may be die struck on request for individual agencies or divisions. Custom logos are available with an order for 20 Guardian Keys or ASP Baton Logo Caps. •

BackSet Design

High Strength Stainless Steel

Heat Treated

Optional Color Insignias


ASP Handcuff Keys . . . as Tough as the Job A

B

C

D A. Extended Clip: A contoured polymer body with spring steel pocket clip and BackSet stainless key.

The BackSet ® design allows rapid location of the handcuff keyway.

B. Swivel: A rugged, precision machined aluminum swivel body with an inset stainless key.

Each key is fashioned from hammer forged, precision machined stainless steel, then heat treated for durability. ASP Handcuff Keys are the toughest in the industry.

C. Guardian 1: A 360° swivel key combined with a premium quality die struck medallion. D. Guardian 2: A top quality BackSet key with an inlaid die 567 __ __ 56250

570 __ __

56252

It’s a Matter of Pride . . . Prestige ® Logos add a mark of distinction to select ASP products. These jewelers brass, nickel silver and full color insignias are inset in ASP Handcuff Keys. Combine the first three numbers of the selected Handcuff Key with the two numbers of the desired Prestige Logo.

01

02

03

04

05

06

07

08

09

10

11

12

13

14

15

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

88

89

90

®

85 Handcuff Keys

86

87

“Protecting Those Who Protect” ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2003 ASP



TEST REPORT

TO: FR: RE:

Bureau Commanders Field Services Division ASP Tactical Handcuffs

ASP Tactical Handcuffs are American made. They exceed NIJ Standard 0307.01. Each is individually pull tested. A series of exclusive ASP patents provide major advances in both the design and construction of wrist restraints. Frame geometry is the result of extensive computer modeling and simulation analysis. Strength potential has been maximized through use of a hardened, interlocking, unitized core. The cuff structure is forged from high strength stainless steel on custom built, high speed, progressive dies. Each restraint is then overmolded with ordnance grade polymer under 75 tons of pressure. The stainless Lock Assembly is unitized and replaceable with a welded lock pin. The ASP Tactical Handcuff was design in the field. Input came from officers and instructors in the 80 nations where ASP currently conducts training. As a result, these ASP handcuff designs incorporate the practical features most requested by officers on the street. These stainless steel handcuff weigh less than standard designs. The flat contact ASP bow is rapidly applied. Conical geometry secures both large and small wrists. Complex “keyhole up” training procedures are no longer necessary. There is a recessed keyway and beveled double lock slot on each side of each restraint. The frame geometry, deep set teeth and precision lockwork of ASP cuffs eliminate the need for backloading. Color coding of restraints is now possible. Custom colors are available for agencies, divisions or to designate the security threat of subjects. Lock Assemblies are readily replaced. ASP handcuffs are the safest restraints in the industry. They incorporate Flex Frame Technology, radiused edges, a smooth action, high visibility double lock indicator, beveled double lock slot and one-direction double and single unlock. We recommend that all existing handcuffs be replaced with ASP Chain, Hinge or Rigid restraints. The Transport Division should adopt one of the special colored Identifier cuffs. Higher security blue or green Lock Sets should be used with all high threat individuals. Investigators should adopt the Airweight aluminum bow restraints.

®

“Protecting Those Who Protect” Handcuff Advantages

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2007 ASP


HINGE HANDCUFFS

ASP Hinge Handcuffs provide a major advance in both the design and construction of wrist restraints. Frame geometry is the result of extensive computer modeling and simulation analysis. Strength potential has been maximized through use of an interlocking, unitized frame. The cuff structure is forged from high strength stainless steel on custom built, high speed, progressive dies. Each restraint is then overmolded with ordnance grade polymer under 75 tons of pressure. The Lock Assembly is unitized and replaceable. The Hinge Handcuff was designed in the field. Input came from officers and instructors in over 80 nations where ASP currently conducts training. As a result, this ASP design incorporates the practical features most requested by officers on the street. A stainless steel handcuff that weighs less than standard designs. A flat contact bow improves application. Complex “keyhole up” training procedures are no longer necessary. There is a keyway and double lock slot on each side of each restraint. A double lock warning bar is readily visible. Both double and single locks are released by turning the key in a single direction. The frame geometry, deep set teeth and precision smooth action eliminates the need for backloading. Color coding of restraints is now possible. Custom colors are available for agencies, divisions or to designate the security threat of subjects. Lock Assemblies are readily replaced. The Hinge Handcuff is a companion to the Tri-Fold ® family of disposable restraints. Each cuff incorporates the innovative design and unparalleled manufacturing expertise of ASP. In design, in construction, in features . . . this is a restraint that is distinctly ASP.


ASP Hinge Handcuffs . . . a New Design on Security Pivot Bushing

Reinforcing Ribs

Bow

High Contact Bow Face Forged aluminum bows are black hardcoat anodized.

Pivot Pin

Cheek Plates

Serial Number

No Sharp Edges

Unitized Stainless Steel Frame

Bow Track Deep Set Ratchet Teeth

Polymer Overmold Lock Set Release Beveled Double Lock Slot

Frame Interlock Bow Guides Recessed Keyway

Hinge cuffs provide more restricted control of large subjects.

Double Lock Slot Lock Bar (Pawl)

Hinge Bar

Lock Spring Hinge Blocks Stainless Security Plate

Hinge Assembly

Double Lock Bar (Yellow)

Replaceable Lock Sets are also available in two, three and slip pawl designs.

( * ) A Patent Pending exclusive ASP feature

9.2" 3.125"

234 mm 79 mm

10 ounces 283 grams 8.5 ounces 241grams Replaceable Lock Set Overmolded stainless steel .035" minimum (1 mm)

Frame Computer designed Flex Frame Technology Surgical stainless steel Precision die struck Reinforcing ribs Bow guides Interlocking cheek plates Unitized assembly Polymer overmold Beveled keyways Permanent color

Security Post

Keyway

Background Precision formed Stainless steel frame * Polymer overmold * High contact face No sharp edges * Permanent color options Extremely lightweight * Interchangeable Lock Set * Recessed keyway Two-sided double lock * Double lock indicator (colored) * Two-sided lock release * One-direction single and double lock release Complies with NIJ Standard 0307.01

Specifications Length Width Weight Steel Aluminum System Construction Edge Radius

Lock Spring Tip

Hinged Stainless steel links Four point rotation Lock Set Replaceable Dual keyways Stainless security block Stainless security posts Dual double lock slots Color coded double lock indicator Dual release lock bar (pawl) One pawl (Yellow) Two pawl (Blue*) Three pawl (Green) Slip pawl (Red) Single spring double lock bar Hardened keyways *

Requires a Custom Key

Bow Conical geometry Integral frame track Deep set teeth High contact face Serial numbered Stainless pivot pin Warranty Limited Lifetime

Advanced Technology Cases are specifically designed for the ASP Tactical Handcuff Series of restraints.

®

“Protecting Those Who Protect” Hinge Handcuffs

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2008 ASP


IDENTIFIER HANDCUFFS 速

What the Best Dressed Criminals are Wearing

The patented design of ASP Chain and Hinge Handcuffs provides the safest restraint in the industry. The flat contact surface and smooth action prevents injury during application. All edges of the frame, cheek plate and bow are rounded to minimize the potential for nerve damage. The conical geometry of the cuff securely holds both small and large wrists. Flex Frame Technology reduces injury potential from excessive lateral stress due to improper handcuff application. The double lock indicator of ASP cuffs is highly visible. It is easily checked to assure activation. Cuffs that test too tight may be loosened and double locked without removing the key from the cuff. The interchangeable Lock Set may be selectably upgraded to a two or three pawl insert. The two-sided lock release is recessed and easily accessed without trauma to the subject. Both the single and double lock are released by turning the key in one direction.

Identifier handcuffs add permanent color options to this world class design. Identifier colors will not crack, chip or fade. They are a permanent, structural component of the handcuff frame and will last the life of the cuff. Two categories of Identifier cuffs are available. The Law Enforcement Series provides both Chain and Hinge Tactical Handcuffs in blue, brown and gray. Corrections Chain and Hinge cuffs are offered in high visibility yellow, orange and pink. Custom colors are available with a minimum purchase of 1,000 handcuffs. Identifier handcuffs can readily distinguish the restraints of specific agencies or divisions. They may be used to designate the security threat or medical condition of subjects. They add the final level of safety to the most secure series of handcuffs on the market.


ASP Identifier Handcuffs . . . Safe and Secure Pivot Bushing Reinforcing Ribs

Bow Serial Number

High Contact Bow Face

Replaceable Lock Sets are also available in two, three and slip pawl designs.

Pivot Pin

Cheek Plates

No Sharp Edges

Polymer Overmold Unitized Stainless Steel Frame

Bow Track Deep Set Ratchet Teeth

Blue

Lock Set Release Beveled Double Lock Slot

Frame Interlock Bow Guides

Double Lock Slot Lock Bar (Pawl)

Swivel Collar

Swivel

Hinge Link

Stainless Security Plate

Recessed Keyway

Lock Spring Lock Spring Tip

Welded Chain

Double Lock Bar (Yellow)

Security Post

Identifier® Chain and Hinge cuffs are produced in three tactical and three high visibility colors. Custom frame colors are available in lots of 1,000. Background Precision formed Stainless steel frame * Polymer overmold * High contact face No sharp edges * Permanent color options Extremely lightweight * Interchangeable Lock Set * Recessed keyway Two-sided double lock * Double lock indicator (colored) * Two-sided lock release * One-direction single and double lock release * Reinforced swivel collar Complies with NIJ Standard 0307.01 ( * ) A Patent Pending exclusive ASP feature

Specifications Length (Chain) Length (Hinge) Width Weight (Chain) Weight (Hinge) System Construction Edge Radius

9.4" 239 mm 9.2" 234 mm 3.125" 79 mm 9 ounces 255 grams 10 ounces 283 grams Replaceable Lock Set Overmolded stainless steel .035" minimum (1 mm)

Keyway

Frame Computer designed Flex Frame Technology Surgical stainless steel Precision die struck Reinforcing ribs Bow guides Interlocking cheek plates Unitized assembly Polymer overmold Beveled keyways Permanent color

Bow Conical geometry Integral frame track Deep set teeth High contact face Serial numbered Stainless pivot pin Color Options Blue Brown Gray Yellow Orange Pink Custom

Chain Link Stainless steel chain Free rotating swivel Reinforcing swivel collar

Gray

Yellow

Warranty Limited Lifetime

Hinge Link Stainless steel links Four point rotation

Lock Sets Replaceable Dual keyways Stainless security block Stainless security posts Dual double lock slots Color coded double lock indicator Dual release lock bar (pawl) One pawl (Yellow) Advanced Technology Cases are Two pawl (Blue*) specifically designed for the ASP Three pawl (Green) Identifier Series of restraints. Slip pawl (Red) Single spring double lock bar Hardened keyways *

Brown

Orange

Requires a Custom Key

Pink

®

“Protecting Those Who Protect” Identifier Handcuffs

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2006 ASP


RIGID HANDCUFFS

ASP Rigid Handcuffs may be used to control the most resistive subject. Their extension lock design provides a secure structure that allows an officer to stabilize without impact. The folding mechanism of the Rigid Cuff permits the restraint to be easily carried, then automatically lock open to form a solid restraint. The rigid configuration offers the most restrictive structure of the ASP Tactical Series. It removes both lateral and linear mobility. For this reason, Rigid Cuffs are ideal for courtroom or airline restraint. ASP Rigid Handcuffs feature a locking bridge in the center of an ergonomic palm swell. Orientation disks confirm proper positioning. Raised for right hand officers, lowered for left. The recessed finger track and contoured hand guard maintain a clear path to the bow guides. As with all ASP Tactical Handcuffs, the Rigid design incorporates a one piece unitized stainless steel frame, polymer overmold, dual keyway, high visibility double lock indicator, high contact conical bow, radiused edges, increased range of adjustment for both large and small wrists, smooth bow action and single direction unlock. Flex Frame Technology reduces injury potential from excessive lateral stress. Thin. Lightweight. ASP Rigid Handcuffs. Providing officers with a new hold on control.


ASP Rigid Handcuffs . . . a New Hold on Control Reinforcing Ribs

Pivot Bushing Bow Serial Number

High Contact Bow Face

Pivot Pin

Cheek Plates

No Sharp Edges

Unitized Stainless Steel Frame

Bow Track

Polymer Overmold

Deep Set Ratchet Teeth Beveled Double Lock Slot

Frame Interlock

Double Lock Slot Lock Bar (Pawl)

Bow Guides

Recessed Keyway

Lock Spring Lock Spring Tip Stainless Security Plate

Frame Support Bridge Cover

Security Post

Rigid Block Bridge Mainspring

Double Lock Bar (Yellow)

Keyway

Hinge Assembly

Replaceable Lock Sets are also available in two, three and slip pawl designs.

Folding Keyway

Background Precision formed Stainless steel frame * Polymer overmold * High contact face No sharp edges Extremely lightweight * Interchangeable Lock Set * Recessed keyway Two-sided double lock * Double lock indicator (colored) * Two-sided lock release * One-direction single and double lock release ( * ) A Patent Pending exclusive ASP feature

Specifications Length Width Weight Steel Aluminum System Construction Edge Radius

9.2" 3.125"

234 mm 79 mm

12.8 ounces 363 grams 10.7 ounces 303 grams Replaceable Lock Set Overmolded stainless steel .035" minimum (1 mm)

Frame Computer designed Flex Frame Technology Surgical stainless steel Precision die struck Reinforcing ribs Bow guides Interlocking cheek plates Unitized assembly Polymer overmold Beveled keyways Permanent color

Bridge Stainless pivot bars (2) Two point rotation Dual extension locking Automatic rigidity Lock Sets Replaceable Dual keyways Stainless security block Stainless security posts Dual double lock slots Color coded double lock indicator Dual release lock bar (pawl) One pawl (Yellow) Two pawl (Blue*) Three pawl (Green) Slip pawl (Red) Single spring double lock bar Hardened keyways *

Requires a Custom Key

Advanced Technology Cases are specifically designed for the ASP Rigid Handcuff Series of restraints.

Bow Conical geometry Integral frame track Deep set teeth High contact face Serial numbered Stainless pivot pin Color Options Tactical Black Custom colors Warranty Limited Lifetime ®

“Protecting Those Who Protect” Rigid Handcuffs

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2006 ASP


SECURITY HANDCUFFS The revolutionary design of ASP Tactical Handcuffs allows Lock Sets to be interchanged to meet the security requirement of a specific agency. Lock Sets are available in one, two and three pawl designs. All ASP Locks incorporate plastic shields which make it impossible to shim the cuff from the side of the bow. One pawl Lock Sets form the foundation of the ASP Restraint System. Color coded Yellow, the single pawl design forms the strongest and most dependable Lock Set. However, the single pawl can be shimmed from the entrance of the frame. It can also be manipulated by a subject who is given access to tools. The Lock Set uses a standard handcuff key. The two pawl High Security ASP Restraint is both shim and pick resistant. It is color coded Blue. A stainless steel plate separates two precisely machined independent pawls. Shimming from the side is impossible. The security plate blocks entrance of a shim into the mouth of the frame. A single tool can retract only one pawl. As a result, the two pawl ASP restraint is easily replaceable yet provides the most secure Lock Set in the industry. The unique key used in the two pawl lock will open all standard handcuffs as well as the two pawl restraint. However, standard keys cannot open a two pawl lock. The three pawl European Lock Set is impossible to shim from the side. A shim inserted from the frame entrance must precisely match the width of all three pawls. The Lock Set uses a standard handcuff key and is color coded Green.

TWO PAWL

THREE PAWL


ASP Security Handcuffs . . . Unparalleled Control Potential Reinforcing Ribs

Pivot Bushing

Pivot Pin

Bow High Contact Bow Face

Serial Number

Cheek Plates

Polymer Overmold

No Sharp Edges Unitized Stainless Steel Frame

Bow Track

Lock Set Release

Deep Set Ratchet Teeth Frame Interlock

Hinge Link

Forged aluminum bows are black hardcoat anodized.

Beveled Double Lock Slot

Bow Guides

Double Lock Slot

Swivel Collar Swivel

Replaceable Lock Sets are available in two and three pawl designs.

Recessed Keyway

Lock Bar (Pawl) Stainless Security Plate

Lock Spring

Welded Chain

Lock Spring Tip Lock Bar (Pawl)

Divider Plate Double Lock Bar (Blue)

Security Post

Rigid Link Background Precision formed Stainless steel frame * Polymer overmold * High contact face No sharp edges * Permanent color options Extremely lightweight * Interchangeable Lock Set * Recessed keyway Two-sided double lock * Double lock indicator (colored) * Two-sided lock release * One-direction single and double lock release Complies with NIJ Standard 0307.01

Chain Link Stainless steel chain Free rotating swivel Reinforcing swivel collar Hinged Stainless steel links Four point rotation Rigid Stainless pivot bars (2) Two point rotation Dual extension locking Automatic rigidity

( * ) A Patent Pending exclusive ASP feature

Specifications Length (Chain) Length (Hinge) Length (Rigid) Width Weight Chain (Steel) Chain (Aluminum) Hinge (Steel) Hinge (Aluminum) Rigid (Steel) Rigid (Aluminum) System Construction Edge Radius Frame Computer designed Flex Frame Technology Surgical stainless steel Precision die struck Reinforcing ribs Bow guides Interlocking cheek plates Unitized assembly Polymer overmold Beveled keyways Permanent color

9.4" 9.2" 9.2" 3.125"

Keyway

239 mm 234 mm 234 mm 79 mm

9 ounces 255 grams 7 ounces 198 grams 10 ounces 283 grams 8.5 ounces 241grams 12.8 ounces 363 grams 10.7 ounces 303 grams Replaceable Lock Set Overmolded stainless steel .035" minimum (1 mm)

Lock Set Replaceable Dual keyways Stainless divider plate Stainless security posts Dual double lock slots Color coded double lock indicator Dual release lock bar (pawl) One pawl (Yellow) Two pawl (Blue*) Three pawl (Green) Single spring double lock bar Hardened keyways

Chain cuffs are flexible and more easily applied during a confrontation. Hinge cuffs provide more restricted control. Rigid cuffs provide added security during transport.

( * ) Requires a Custom Key

Bow Conical geometry Integral frame track Deep set teeth High contact face Serial numbered Stainless pivot pin Warranty Limited Lifetime

Advanced Technology Cases are specifically designed for the ASP Tactical Handcuff Series of restraints.

®

“Protecting Those Who Protect” Security Handcuffs

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 2008 ASP


TRI-FOLD RESTRAINTS ®

ASP Tri-Fold Disposable Restraints are compact, easily carried and rapidly applied. Specifically designed to law enforcement standards, their wide, brightly colored straps have no sharp edges. Tri-Folds open to oversized loops of incredible strength. The Roller Loc® ratchet has an extremely smooth pull with a covered locking mechanism. These are the most tactically sophisticated disposable restraints on the market.

Easily Carried

Rapidly Applied

Oversized Loops

Smooth Pull

Extreme Strength

Covered Lock


ASP Tri-Folds . . . Disposable Tactical Restraints Tri-Folds® feature a recessed identification plate and textured writing surface.

Custom Formulated Polymer Straps Recessed Identification Plate

Roller Loc Retention System

Retaining Block

Compact Foldable Design

Strength Tested for your safety Background Specifically designed as a law enforcement restraint Compact Easily carried Rapidly applied Tri-Ring pull No sharp edges Wide, brightly colored straps Extremely strong, oversized loops Smooth pull Roller Loc® ratchet Covered locking mechanism

Ratchet Smooth, single tooth pull Roller Loc retention system Pick resistant Covered locking mechanism Will not pull through

Single Pull Design Both straps may be tightened with a single pull Automatic Spacing Integral Retaining Block spacing Helps avoid over tightening Facilitates removal

Clip Case Holds two Tri-Folds Open top Clip-on design Carabiner Forged aluminum clip Black Tactical carrier Tri-Fold Ring Injection molded Black Foldable Detachable

Identification Recessed identification plate Textured writing surface Large marking area on each strap Packaging Six restraints per bag Re-sealable Self-locking top O

R-

LOC

OC

Straps Injection molded thermoplastic .5" wide safety strap Rounded edges High strength micro-tension teeth Three position diamond folds Safety Yellow Tactical Black Training Red

Application Pop the Tri-Fold open Place the restraints onto the subject’s wrists Pull the straps to tighten

Duty Case Holds three Tri-Folds Flap closure Injection molded Three optional finishes Leather Grain Basketweave Ballistic

L

21" .5" .080" .060" 6" .25"

Setup Carried with straps folded in three locations Straps pop open to a diamond configuration Ends may be pushed up for easy gripping Straps may be retracted for easy storage

VA P

Specifications Strap Length Strap Width Strap Thickness Block Thickness Loop Diameter Pull Holes

Assembly Twin high strength straps Molded connecting block

VA P O R

-

Scarab® cutters snap onto a keyring. They remove restraints with compound leverage.

Retaining Block Black Smooth profile Reinforced top and base

Duty Carriers (in three finishes) hold three Tri-Folds.

Clip Cases quickly attach two Tri-Fold Restraints.

®

“Protecting Those Who Protect” Tri-Fold

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com

© 1998 ASP


16 SideBreak Clip Scabbard

M75

M77

M52 225

262 263 257

M76 223

225

M

Back Plate Body Black Basketweave ASPtec Ballistic Weave Rotating Base 2" Adjustment Block Belt Clip Hex Key Back Plate Screw Lock Ring Retention Clip Wave Washer

M52

1.80

M53 M54 M55 M56 M75 M76 M77 223 225 257 262 263

5.20 5.20 5.20 5.20 2.50 1.00 2.50 .25 .10 .20 .20 .25

APRIL 2005


Agent Baton

AB-404 ASP-5

LL445

LL307 LL116

ASP-204 LL128 LL128 LL101

LL102

AB-406 LL104 LL103

Handle Tube LL445 Middle Tube Locking Lug LL101 Middle Tube Stop LL103 End Tube Locking Lug LL102 End Tube Stop LL104 LeverLoc End Tube LL116 Tube Stop Pin LL128 LeverLoc Aluminum Middle Tube LL307 Tip ASP-5 End Cap AB-406 Belt Clip AB-404

41.00 14.00 10.00 12.00 8.00 14.00 .25 27.00 4.00 6.00 3.00

AUGUST 2010


Chain Handcuff

H210 REPLACEABLE LOCK SET Lock Set

H210

6.25

MAY 2005


F16

209

5 209 1, 52

8

3

204

16

19 (WA) 7

63, 81

201

6, 49

2, 53

Handle Black Electroless Airweight (Aluminum) Federal DuraTec (Aluminum) Middle Tube Black Chrome Electroless Gold (Presentation) Airweight End Tube Black Chrome Electroless Gold (Presentation) * Shaft Assembly consists of the Middle Tube, End Tube and Tip ** Retaining Clip Assembly consists of the Washer, Retaining Clip and Rivet

1 1E 52 63 81

21.15 21.45 21.15 17.80 16.75

2B 2C 2E 2G 53

9.25 8.05 9.50 15.50 17.45

3B 3C 3E 3G

10.25 9.05 10.20 16.00

Tip Black Chrome Electroless Gold (Presentation) Shaft Assembly* Airweight Black Chrome Electroless Gold (Presentation) Cap Black Electroless Airweight Retaining Clip Assembly** Washer Retaining Clip Rivet Grip O-Ring Tape

5B 5C 5E 5G

1.40 1.15 .95 12.45

16A 16B 16C 16E 16G

29.10 20.90 18.25 20.65 43.95

6 6E 49 (WA) 7 19 201 8 204 209

2.30 1.95 2.95 1.50 1.10 .25 .15 1.60 .05 5.00 /roll

JANUARY 2009


F16 Federal Scabbard

M86

273 M85

258

274 263 257

M51 223

M87

Slide Bar Back Plate Belt Loop Body, Black Hex Key Lock Ring Slide Bar Screw Wave Washer Adjustment Screw Retention Clip

M51 M85 M86 M87 223 257 258 263 273 274

.60 1.80 2.50 5.20 .25 .20 .25 .25 .75 .20

APRIL 2005


F16 SideBreak Clip-On Scabbard

M75

M77

M52 225

262 263 257

M76 223

225

M

Back Plate Body Black Basketweave ASPtec Ballistic Weave Rotating Base 2" Adjustment Block Belt Clip Hex Key Back Plate Screw Lock Ring Retention Clip Wave Washer

M52

1.80

M53 M54 M55 M56 M75 M76 M77 223 225 257 262 263

5.20 5.20 5.20 5.20 2.50 1.00 2.50 .25 .10 .20 .20 .25

APRIL 2005


F16 SideBreak Paddle Scabbard

M84 223 M80 262

273

225 M

Body Black Basketweave ASPtec Ballistic Weave Back Plate Paddle Hex Key Back Plate Screw Retention Clip Adjustment Screw

M53 M54 M55 M56 M80 M84 223 225 262 273

5.20 5.20 5.20 5.20 1.80 5.00 .25 .10 .20 .75

APRIL 2005


F21

209 5

209

33, 55

27 9

21 204 19 66, 82

(WA) 7 201

6, 49

26, 56

Handle Black Electroless Airweight (Aluminum) Federal DuraTec (Aluminum) Middle Tube Black Chrome Electroless Gold (Presentation) Airweight End Tube Black Chrome Electroless Gold (Presentation) * Shaft Assembly consists of the Middle Tube, End Tube and Tip ** Retaining Clip Assembly consists of the Washer, Retaining Clip and Rivet

33 33E 55 66 82

24.10 25.60 23.55 20.55 18.50

26B 26C 26E 26G 56

11.55 10.35 11.95 28.10 19.50

27B 27C 27E 27G

13.00 11.80 13.10 29.60

Tip Black Chrome Electroless Gold (Presentation) Shaft Assembly* Airweight Black Chrome Electroless Gold (Presentation) Cap Black Electroless Airweight Retaining Clip Assembly** Washer Retaining Clip Rivet Grip O-Ring Tape

5B 5C 5E 5G

1.40 1.15 .95 12.45

21A 21B 21C 21E 21G

33.90 25.95 23.30 26.00 70.15

6 6E 49 (WA) 7 19 201 9 204 209

2.30 1.95 2.95 1.50 1.10 .25 .15 1.90 .05 5.00 /roll

JANUARY 2009


F21 Federal Paddle Scabbard

M84

223

274

273

M88

Paddle Body, Black Hex Key Adjustment Screw Retention Clip

M84 M88 223 273 274

5.00 5.35 .25 .75 .20

APRIL 2005


F21 Federal Paddle Scabbard

M84

223

274

273

M88

Paddle Body, Black Hex Key Adjustment Screw Retention Clip

M84 M88 223 273 274

5.00 5.35 .25 .75 .20

APRIL 2005


F21 Federal Scabbard

M86

M85

273

258

274 263 257

M51

223

M88

Slide Bar Back Plate Rotating Belt Loop Body, Black Hex Key Lock Ring Slide Bar Screw Wave Washer Adjustment Screw Retention Clip

M51 M85 M86 M88 223 257 258 263 273 274

.60 1.80 2.50 5.35 .25 .20 .25 .25 .75 .20

APRIL 2005


F21 SideBreak Clip-On Scabbard

M75

M77

M57 225

262 263 257

M76 223

M

225

Back Plate Body Black Basketweave ASPtec Ballistic Weave Rotating Base 2" Adjustment Block Belt Clip Hex Key Back Plate Screw Lock Ring Retention Clip Wave Washer

M57

1.90

M58 M59 M60 M61 M75 M76 M77 223 225 257 262 263

5.35 5.35 5.35 5.35 2.50 1.00 2.50 .25 .10 .20 .20 .25

APRIL 2005


F21 SideBreak Paddle Scabbard

M84 223 M81 262

273

M 225

Body Black Basketweave ASPtec Ballistic Weave Back Plate Paddle Hex Key Back Plate Screw Retention Clip Adjustment Screw

M58 M59 M60 M61 M81 M84 223 225 262 273

5.35 5.35 5.35 5.35 1.90 5.00 .25 .10 .20 .75

APRIL 2005


F21 SideBreak Scabbard

M50

M57

262 258 263 257 M51 223

225

M

258 225

Rotating Belt Loop Slide Bar Back Plate Body Black Basketweave ASPtec Ballistic Weave Hex Key Back Plate Screw Lock Ring Slide Bar Screw Retention Clip Wave Washer

M50 M51 M57

2.50 .60 1.90

M58 M59 M60 M61 223 225 257 258 262 263

5.35 5.35 5.35 5.35 .25 .10 .20 .25 .20 .25

APRIL 2005


F21 Training Baton

407 420

210

405

403

216

411

402

401

Grip and Rod Assembly* Grip Grommet Rod Foam Core Cable Tie Cover Locking Collar Set Screw Tip Disk

401 402 403 405 210 407 411 216 420

10.05 2.50 1.75 5.80 4.90 .65 14.10 2.50 .50 .55

* Grip and Rod Assembly consists of Part Numbers 401, 402 and 403.

DECEMBER 2004


F26

209 5 10 22, 58

24

209

204 (WA)

26 65, 83

19 7

201 6 23, 59

Handle Black Electroless Airweight (Aluminum) Federal DuraTec (Aluminum) Middle Tube Black Chrome Electroless Gold (Presentation) Airweight End Tube Black Chrome Electroless Gold (Presentation) * Shaft Assembly consists of the Middle Tube, End Tube and Tip ** Retaining Clip Assembly consists of the Washer, Retaining Clip and Rivet

22 22E 58 65 83

26.25 27.90 26.35 22.80 22.05

23B 23C 23E 23G 59

13.00 11.85 13.30 30.75 22.75

24B 24C 24E 24G

14.50 13.35 14.75 31.50

Tip Black Chrome Electroless Gold (Presentation) Shaft Assembly* Airweight Black Chrome Electroless Gold (Presentation) Cap Black Electroless Airweight Retaining Clip Assembly** Washer Retaining Clip Rivet Grip O-Ring Tape

5B 5C 5E 5G

1.40 1.15 .95 12.45

26A 26B 26C 26E 26G

38.65 28.90 26.35 29.00 74.70

6 6E 49 (WA) 7 19 201 10 204 209

2.30 1.95 2.95 1.50 1.10 .25 .15 2.00 .05 5.00 /roll

JANUARY 2009


F26 Federal Scabbard

M86

M85

273

258

274 263 257

M51

223

M89

Slide Bar Back Plate Rotating Belt Loop Body, Black Hex Key Lock Ring Slide Bar Screw Wave Washer Adjustment Screw Retention Clip

M51 M85 M86 M89 223 257 258 263 273 274

.60 2.00 2.50 6.30 .25 .20 .25 .25 .75 .20

APRIL 2005


F26 SideBreak Clip-On Scabbard

M75

M77

M62 225

262 263 257

M76 223

M 225

Back Plate Body Black Basketweave ASPtec Ballistic Weave Rotating Base 2" Adjustment Block Belt Clip Hex Key Back Plate Screw Lock Ring Retention Clip Wave Washer

M62

2.00

M63 M64 M65 M66 M75 M76 M77 223 225 257 262 263

6.30 6.30 6.30 6.30 2.50 1.00 2.50 .25 .10 .20 .20 .25

APRIL 2005


F26 SideBreak Paddle Scabbard

M84 223 M82 262

273

M

225

Body Black Basketweave ASPtec Ballistic Weave Back Plate Paddle Hex Key Belt Plate Screw Retention Clip Adjustment Screw

M63 M64 M65 M66 M82 M84 223 225 262 273

6.30 6.30 6.30 6.30 2.00 5.00 .25 .10 .20 .75

APRIL 2005


F26 SideBreak Scabbard

M50

M62

262

258 263 257 M51

223

225

258

M 225

Rotating Belt Loop Slide Bar Back Plate Body Black Basketweave ASPtec Ballistic Weave Hex Key Back Plate Screw Lock Ring Slide Bar Screw Retention Clip Wave Washer

M50 M51 M62

2.50 .60 2.00

M63 M64 M65 M66 223 225 257 258 262 263

6.30 6.30 6.30 6.30 .25 .10 .20 .25 .20 .25

APRIL 2005


F26 Training Baton

408

420

406 210

404

216

411

402 401

Grip and Rod Assembly* Grip Grommet Rod Foam Core Cable Tie Cover Locking Collar Set Screw Tip Disk

401 402 404 406 210 408 411 216 420

11.05 2.50 1.75 6.80 5.50 .65 14.20 2.50 .50 .55

* Grip and Rod Assembly consists of Part Numbers 401, 402 and 404.

DECEMBER 2004


F31 Federal Paddle Scabbard

M84

223

274

273

M90

Paddle Body, Black Hex Key Adjustment Screw Retention Clip

M84 M90 223 273 274

5.00 7.00 .25 .75 .20

APRIL 2005


Hinge Handcuff

H210 REPLACEABLE LOCK SET Lock Set

H210

6.25

MAY 2005


Key Defender OC

119 203

187

t er Ins

229 M17

120 203

207 118

208 Body* Electroless 18K Gold Textured Cap* Electroless 18K Gold Textured Tip* Electroless 18K Gold Textured * For the Body (187), Cap (118), Tip (119), specify: Blue, Violet, Pewter, Red, Black or Gold

187 187E 187G 187T 118 118E 118G 118T 119 119E 119G 119T

5.75 8.75 12.50 8.75 5.00 6.25 8.75 6.25 2.50 3.75 6.25 3.75

Swivel Dowel Pin Safety Lock Plug End O-Ring Tip End O-Ring Small Split Ring Large Split Ring

120 229 M17 203 203 207 208

1.50 .10 .25 .05 .05 .40 .50

JANUARY 2009


L16

LL131

209

209 121

114, 306 115, 307 116

21 204

128 101

128 102

Handle Black Electroless Airweight Middle Tube Black Chrome Electroless Airweight End Tube Black Chrome Electroless Tip Black Chrome Electroless

* Shaft Assembly consists of the Middle Tube, End Tube and Tip

104

103

6, 49

114B 114E 306A

28.00 26.00 30.00

115B 115C 115E 307A

18.00 18.00 20.00 27.00

116B 116C 116E

12.00 12.00 14.00

121B 121C 121E

3.00 3.00 4.00

Shaft Assembly* Black Chrome Electroless Airweight Cap Black Electroless Airweight Large Locking Lug Small Locking Lug Large Plug Small Plug O-Ring Grip Tape Spacer Sleeves

LL16B LL16C LL16E LL16A

77.50 77.50 82.50 89.50

6 6E 49 101 102 103 104 204 21 209 LL131

2.30 1.95 2.95 14.00 12.00 10.00 8.00 .05 2.50 5.00 /roll 1.00 /set

AUGUST 2010


L21

LL131

209

209

121 111, 206 112, 207 113

22 204

128 101

128 102

Handle Black Electroless Airweight Middle Tube Black Chrome Electroless Airweight End Tube Black Chrome Electroless Tip Black Chrome Electroless

* Shaft Assembly consists of the Middle Tube, End Tube and Tip

104

103

6, 49

111B 111E 206A

30.00 28.00 34.00

112B 112C 112E 207A

20.00 20.00 22.00 30.00

113B 113C 113E

13.00 13.00 15.00

121B 121C 121E

3.00 3.00 4.00

Shaft Assembly* Black Chrome Electroless Airweight Cap Black Electroless Airweight Large Locking Lug Small Locking Lug Large Plug Small Plug O-Ring Grip Tape Spacer Sleeves Tube Stop Pin

LL21B LL21C LL21E LL21A 6 6E 49 101 102 103 104 204 22 209 LL131 128

80.50 80.50 85.50 112.50 2.30 1.95 2.95 14.00 12.00 10.00 8.00 .05 3.00 5.00 /roll 1.00 /set .25

AUGUST 2010


L26

LL131

209

121 117, 406

209

118, 407 119

204

23

128 101

128 102

6, 49

104 103

Handle Black Electroless Airweight Middle Tube Black Chrome Electroless Airweight End Tube Black Chrome Electroless Tip Black Chrome Electroless

* Shaft Assembly consists of the Middle Tube, End Tube and Tip

117B 117E 406A

32.00 30.00 36.00

118B 118C 118E 407A

21.00 21.00 23.00 31.00

119B 119C 119E

14.00 14.00 16.00

121B 121C 121E

3.00 3.00 4.00

Shaft Assembly* Black Chrome Electroless Airweight Cap Black Electroless Airweight Large Locking Lug Small Locking Lug Large Plug Small Plug O-Ring Grip Tape Spacer Sleeves Tube Stop Pin

LL26B LL26C LL26E LL26A 6 6E 49 101 102 103 104 204 23 209 LL131 128

82.50 82.50 87.50 115.50 2.30 1.95 2.95 14.00 12.00 10.00 8.00 .05 3.50 5.00 /roll 1.00 /set .25

AUGUST 2010


Palm Defender OC

119 203

144

t er Ins

229 M17 120 203

207 118

208

Body* Electroless 18K Gold Textured Cap* Electroless 18K Gold Textured Tip* Electroless 18K Gold Textured * For the Body (144), Cap (118), Tip (119), specify: Blue, Violet, Pewter, Red, Black or Gold

144 144E 144G 144T 118 118E 118G 118T 119 119E 119G 119T

5.00 7.50 11.25 7.50 5.00 6.25 8.75 6.25 2.50 3.75 6.25 3.75

Swivel Dowel Pin Safety Lock Plug End O-Ring Tip End O-Ring Small Split Ring Large Split Ring

120 229 M17 203 203 207 208

1.50 .10 .25 .05 .05 .40 .50

JANUARY 2009


Rigid Handcuff

H210 REPLACEABLE LOCK SET

Lock Set

H210

6.25

APRIL 2006


21 Sentry Baton

5

221

27

204 19 (WA) 7 201

49

26

Handle Middle Tube Black End Tube Black Tip Black Shaft Assembly* Black Cap Airweight Retaining Clip Assembly** Washer Retaining Clip Rivet O-Ring * Shaft Assembly consists of the Middle Tube, End Tube and Tip ** Retaining Clip Assembly consists of the Washer, Retaining Clip and Rivet

221

20.55

26B

11.55

27B

13.00

5B

1.40

21B

25.95

49 (WA) 7 19 201 204

2.95 1.50 1.10 .25 .15 .05

AUGUST 2010


Street Defender OC

179 251

188

t er Ins

252 M49 182 251

207 181

208

Body Black Electroless Textured Cap Black Electroless Textured Tip Black Electroless Textured

188B 188E 188T

8.00 9.50 10.25

181B 181E 181T

6.25 7.50 8.25

179B 179E 179T

4.75 6.25 7.00

Swivel Dowel Pin Safety Lock Plug End O-Ring Tip End O-Ring Small Split Ring Large Split Ring

182 252 M49 251 251 207 208

4.50 .20 .30 .10 .10 .40 .50

JANUARY 2009


Tactical Defender OC

185 804 186

E25

M72 804 147

226

M73

t er Ins

265 145

M74 t er Ins

146 264

O-Ring, Canister Tube Grip, Tactical Defender Canister Tube Canister Head Housing Actuator, Black Pin, Actuator Plunger, Safety

804 E25 186 185 146 145 147

.10 2.00 18.05 10.00 18.00 2.50 2.50

Screw Spring, Button Spring, Plunger Button, Safety Button Actuator Plunger, Actuator

264 265 226 M72 M73 M74

1.25 .50 .50 2.50 5.00 7.50

FEBRUARY 2007


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.