Channel Footpath Drainage
The ideal solution for draining pedestrian areas Channel Footpath Drainage
ACO N100K Channel Footpath Drainage - Inlay Gratings FOR USE WITH ASPHALT, CONCRETE AND PAVIOUR APPLICATIONS Load Class (EN 1433:2002/DIN 19580)
Optimum solution
Benefits for specifiers
ACO Channel Footpath Drainage systems N100K 080 (80mm total depth) and N100K 0100 (100mm total depth) are general purpose channel drainage systems with protective cast-in galvanised steel edge rails for use where installation depth is restricted, whilst providing excellent drainage performance.
Profiled kerb outlet buff or grey coloured and rainwater downpipe adaptor
3-way channel connector to build drainage systems
Resin concrete construction offers excellent chemical resistance
Quicklock速 fastenings for all gratings
Based on ACO N100K range of channels with a wide range of inlay gratings
Constant depth channels with an internal width of 100mm and invert depths of 65mm and 85mm
Channel sealant groove for suspended slab applications ie. car park decks
Downpipe connector for use with external diameter 85mm plastic pipe (see page 5)
Free technical support To support the specifier and contractor in designing and installing ACO N100K Channel Footpath Drainage schemes, ACO Drain Design Services Department offers computer-aided scheme design, hydraulic performance calculations and installation advice services. Telephone Hotline:
01462 816666
Benefits for contractors
Fax Hotline:
Resin concrete channel construction is strong and rigid for lifetime integrity
Quick to install, minimal excavation
Lightweight channel units - maximum weight less than 12kg
Channel provided with galvanised steel rail as standard - stainless steel rails available to special order
A wide range of Quicklock速 gratings available
01462 851081 e-mail:
draintechnical@aco.co.uk website:
www.aco.co.uk
80 and 100mm channel unit complete with Quicklock速 inlay grating
2
ACO N100K Channel Footpath Drainage FOR USE WITH ASPHALT, CONCRETE AND PAVIOUR APPLICATIONS
Kerb Outlets
Bullnose/Textured†bullnose kerb outlet
Half batter kerb outlet
Full batter kerb outlet
Channel Accessories
Rainwater downpipe adaptor
Resin concrete
Re *
te
e
t re
nc
co
e et
r nc
co
ed rc
re nc
co
ry
fo in
re
na
sin
Water absorption <0.01% by weight*
i rd
O
3-4 times compressive strength of OPC (Ordinary Portland Cement), so products can be made lighter
ss
10 20 30 40 50 60 70 80 90 100
la
Minimal lifetime maintenance
G
Compressive strength strength (N/mm2)
Corner unit 3-way connector (N100K 0100 only)
Water absorption
â&#x20AC; N100K 080 and 080V only
1.5 2.0
BBA report No. 1580
3
sin nc e*
te
re nc
co
e
t re
nc
t re
co
ed rc fo
in
y
co
ar
in
re ss
rd
Re
O
la
G
*
depth (mm)
0.5 1.0
ACO N100K Channel Footpath Drainage PARTS TABLE Channel units with sealant grooves for use with inlay gratings only
Description
Order no.
Invert Constant Depth
Dimensions (mm) Depth Overall Invert
Width Bore
Overall
Length
Weight (kg)
Closing Endcap
N100K 080
06395
L
80
65
100
130
1000
9.0
N100K 080V
06071
L
80
65
100
130
1000
9.4
N100K006 N100K006
N100K 0100
06086
L
100
85
100
130
1000
10.4
N100K006
N100K 1000V
06088
L
100
85
100
130
1000
10.5
N100K006
1000mm 80/100mm
100mm
130mm
100mm
80/100mm
N100K 080/N100K 0100
90mm
N100K 080V/N100K 0100V
Kerb outlets
Description
Colour
Order no.
Dimensions (mm) Depth Overall Invert
HBKOB Half batter
buff
4608
200
-
100
155
130
HBKOG Half batter
grey
4682
200
-
100
155
130
6.5
FBKOB Full batter
buff
4609
200
-
100
155
130
6.5
FBKOG Full batter
grey
4683
200
-
100
155
130
6.5
BNKOB Bullnose
buff
4610
200
-
100
155
130
7.5
BNKOG Bullnose
grey
4684
200
-
100
155
130
7.5
CKOG Textured bullnose†
grey
7173
200
-
100
155
130
7.5
130mm
155mm
FBKOB/FBKOG Full batter kerb outlets
Weight (kg) 6.5
155mm 44mm
200mm
200mm
HBKOB/HBKOG Half batter kerb outlets
Length
130mm
155mm 44mm
44mm
Overall
200mm
130mm
Width Bore
BNKOB/HBNKOG/CKOG Bullnose kerb outlets
V Indicates a PVC-U Ø110mm pipe cast into channel base for vertical outlet.
4
† For N100K 080 and 080V only. Note: As with all pre-cast products, polymer concrete units are subject to dimensional and weight tolerances.
ACO N100K Channel Footpath Drainage PARTS TABLE Corner unit 3-way connector (N100K 0100 only)
Description
Colour
Order no.
Dimensions (mm) Depth Overall Invert
TO2B Corner unit
buff
4692
100
85
100
150
155
3.0
TO2G Corner unit
grey
4694
100
85
100
150
155
3.0
Width Bore
Overall
Length
Weight (kg)
155mm
150mm
100mm
100mm
155mm
TO2B/TO2G Corner unit 3-way connector Endcaps for corner unit
Description
Colour
Order no.
Dimensions (mm) Depth Overall Invert
4844 Closing
buff
4844
100
-
-
130
20
0.5
4848 Closing
grey
4848
100
-
-
130
20
0.5
Order no.
Dimensions (mm) Depth Overall Invert
Width Bore
Overall
Length
Weight (kg)
DCO1B Downpipe connector buff
4607
80
65
100
150
155
2.6
DCO1G Downpipe connector grey
4681
80
65
100
150
155
2.6
DCO2B Downpipe connector buff
1466
100
85
100
150
155
3.2
DCO2G Downpipe connector grey
1467
100
85
100
150
155
3.2
Width Bore
Overall
Length
Weight (kg)
100mm
20mm
20mm 130mm
4844/4848 Closing endcap Inlet/downpipe connector
155mm
150mm
80mm
155mm
155mm
155mm
150mm
Colour
100mm
Description
Ø75mm
Ø75mm
Ø85mm
Ø85mm
DCO1B/DCO1G Downpipe connector
DCO2B/DCO2G Downpipe connector
Note: As with all pre-cast products, polymer concrete units are subject to dimensional and weight tolerances.
5
ACO N100K Channel Footpath Drainage PARTS TABLE FOR N100K 080 AND N100K 0100 ONLY Inlay gratings - Load Class A15
Description
Order no.
Dimensions (mm) Width Overall Length
Slotted galvanised steel 400QL
31530
123
1000
-
2.0
Slotted galvanised steel 402QL
31531
123
500
-
1.0
Stainless steel slotted 460QL
31630
123
1000
-
2.0
Stainless steel slotted 461QL
31631
123
500
-
1.0
Description
Order no.
Dimensions (mm) Width Overall Length
Flange Thickness
Weight (kg)
Slotted galvanised steel 423QL
31540
123
1000
-
4.6
Slotted galvanised steel 424QL
31541
123
500
-
2.3
Stainless steel slotted 470QL
31640
123
1000
-
4.6
Stainless steel slotted 471QL
31641
123
500
-
2.3
Galvanised steel mesh 410QL*
2815
123
1000
-
3.7
Galvanised steel mesh 412QL*
2816
123
500
-
2.0
‘Heelguard’ resin composite 522QL - Black
4780
123
500
-
1.6
‘Heelguard’ resin composite 523QL - White
4781
123
500
-
1.6
‘Heelguard’ cast iron 508QL
2810
123
500
-
3.6
Slotted cast iron 502QL
2809
123
500
-
4.1
Perforated galvanised steel 483QL*
31520
123
1000
-
4.5
Perforated galvanised steel 2460QL*
31521
123
500
-
2.4
Mosaic ductile iron 519QL*
7593
123
500
-
4.1
Slotted galvanised steel
Flange Thickness
Weight (kg)
Stainless steel slotted
Inlay gratings - Load Class C250
Slotted galvanised steel
Stainless steel slotted
Galvanised steel mesh
‘Heelguard’ resin composite
‘Heelguard’ cast iron
Slotted cast iron
Perforated galvanised steel
Mosaic ductile iron
6 *
These gratings are available to special order. Please contact ACO Customer Support Team for availability.
ACO N100K Channel Footpath Drainage INSTALLATION DETAILS A AND C 1.0 Ground Conditions
Asphalt Pavement
The customer should ensure that the minimum dimensions shown are suitable for the existing ground conditions. Engineering advice may be necessary.
Note: Top of haunch 25mm maximum below wearing course
Detail A
See Note 5
2.0 Block and Paving Slab Pavements The channel must be supported laterally and therefore blocks and pavement slabs must be restrained from movement by bedding securely e.g. by using a Polymer Modified Mortar for bed and perpendicular joints (for example RONAFIX Mortar Mix C from Ronacrete: Tel 01279 638 700). Engineering advice may be required.
Concrete bed and haunch Minimum C25 100mm minimum Class A 150mm minimum Class C
See Note 1 100mm minimum Class A 150mm minimum Class C
Concrete Pavement
Note: Expansion joint to engineers detail
See Note 3
Detail A
3.0 Surface Cracks Alternate crack control and movement joints transversely within bed and haunch may reduce unsightly surface cracking.
Concrete Slab
Concrete Slab Concrete bed and haunch Minimum C25 100mm minimum Class A 150mm minimum Class C
4.0 Joint Sealant Where ACO Drain channel joints and fittings are to be sealed (where used in foul water applications or where impermeability is required) contact a sealant specialist for guidance on the most appropriate sealing compound to use. 5.0 Surface Protection In asphalt pavements avoid contact between compaction equipment and channel/grating. This may be achieved by ensuring that the finished surface level lies above the grating level (by at least 3mm). Stones should be removed from grating prior to laying/rolling wearing course.
See Note 1 100mm minimum Class A 150mm minimum Class C
Block and Paving Slab Pavement (Options 1 and 2) Note: Block bedded securely (See Note 2)
Detail A Option 1 See Note 3
Option 2
Block
Block
Concrete bed and haunch Minimum C25 100mm minimum Class A 150mm minimum Class C
See Note 1 Approx 225mm
100mm minimum Class A 150mm minimum Class C
Detail A
3mm Generally
Grating
7 Pavement or haunch (construction varies)
Channel Wall
ACO N100K Channel Footpath Drainage SPECIFICATION CLAUSE
Model specification clause The surface drainage system shall be ACO drain N100K channel system as supplied by ACO Technologies plc; all materials and components within the scope of this channel system shall be obtained from this manufacturer. The system shall be certificated to Load Class A/C as defined in EN 1433:2002, load test certificates shall be supplied to the Supervising Officer. The system shall be of 100mm nominal internal width, manufactured in polyester resin concrete with cast-in galvanised/stainless steel edge rails. The channels shall be installed with manufacturer’s grating appropriate to the Load Class of the place of installation and locked securely in place using the manufacturer’s Quicklock® boltless locking system.
The system shall be installed in accordance with the manufacturer’s printed instructions, and the work carried out as specified in drawing no. ( * ) and in accordance with recognised good practice. Standards of workmanship shall generally be as specified in BS EN 752:Parts 1-4 and BS 8000:Part 14:1989.
*
insert appropriate information
Note: Also available on our website for downloading
Technical Support Services To support architects, engineers and contractors in designing and installing ACO N100K Channel Footpath Drainage schemes, ACO Drain Design Services Department offers computer-aided scheme design, hydraulic performance calculations and installation advice services. Our Telephone Hotline 01462 816666, Fax Hotline 01462 851081, e-mail draintechnical@aco.co.uk and website www.aco.co.uk enable us to give you the response you need.
8
ACO CivicDrain速 Channel Footpath Drainage - Overlay Gratings FOR USE WITH BLOCK PAVIOUR AND PAVING SLAB APPLICATIONS Load Class (EN 1433:2002)
Optimum solution
Benefits for specifiers
ACO Channel Footpath Drainage systems - G080 (80mm total depth) and G0100 (100mm total depth) - for use where installation depth is restricted, whilst providing excellent drainage performance.
Profiled kerb outlet buff or grey coloured and rainwater downpipe adaptor
3-way channel connector to build drainage systems
Resin concrete construction offers excellent chemical resistance
Free technical support
Based on the ACO CivicDrain速 range of channels with a wide range of lockable overlay gratings
Constant depth channels with an internal width of 100mm and invert depths of 60mm and 80mm
Channel sealant groove for suspended slab applications ie. car park decks
Downpipe connector for use with external diameter 85mm plastic pipe (see page 12)
Fax Hotline:
Neat appearance from overlay grating
01462 851081
Benefits for Contractors
e-mail:
To support the specifier and contractor in designing and installing ACO CivicDrain速 Channel Footpath Drainage schemes, ACO Drain Design Services Department offers computer-aided scheme design, hydraulic performance calculations and installation advice services. Telephone Hotline:
01462 816666
draintechnical@aco.co.uk website:
www.aco.co.uk
Resin concrete channel construction is strong and rigid for lifetime integrity
Quick to install, minimal excavation
Lightweight channel units - maximum weight less than 13kg
A wide range of lockable gratings available for different load classes.
80 and 100mm channel unit complete with bolted overlay grating
9
ACO CivicDrain® Channel Footpath Drainage FOR USE WITH BLOCK PAVIOUR AND PAVING SLAB APPLICATIONS Kerb Outlets
Bullnose/Textured† bullnose kerb outlet
Half batter kerb outlet
Full batter kerb outlet
Channel Accessories
Rainwater downpipe adaptor
Resin concrete
co t re e*
e
t re
nc
co
te
ed rc
re nc
co
nc
y
fo in
re
r na
in
s Re
Water absorption <0.01% by weight*
i rd
O
3-4 times compressive strength of OPC (Ordinary Portland Cement), so products can be made lighter
ss
10 20 30 40 50 60 70 80 90 100
la
Minimal lifetime maintenance
G
Compressive strength strength (N/mm2)
Corner unit 3-way connector (G0100 only)
Water absorption
depth (mm)
0.5 1.0 1.5 2.0
sin Re *
te
d
e
et
r nc
co
BBA report No. 1580
te
re nc
co
e rc
*
re nc
y
fo in
10
co
ar
re
in
rd
ss
la
O
G
† G080 only
ACO CivicDrain® Channel Footpath Drainage PARTS TABLE Channel units with sealant groove for use with overlay gratings only
Description
Order no.
Invert Constant Depth
Dimensions (mm) Depth Overall Invert
Width Bore
Overall
Length
Weight (kg)
Closing Endcap
G080*
6030
L
80
65
100
130
1000
7.6
G006
G0100*
6031
L
100
85
100
130
1000
12.0
G006
100mm
1000mm
80-100mm
60-80mm
130mm
Ø110mm
90mm
Kerb outlets
Description
Colour
Order no.
Dimensions (mm) Depth Overall Invert
HBKOB Half batter
buff
4608
200
-
100
155
130
HBKOG Half batter
grey
4682
200
-
100
155
130
6.5
FBKOB Full batter
buff
4609
200
-
100
155
130
6.5
FBKOG Full batter
grey
4683
200
-
100
155
130
6.5
BNKOB Bullnose
buff
4610
200
-
100
155
130
7.5
Width Bore
Overall
Length
Weight (kg) 6.5
BNKOG Bullnose
grey
4684
200
-
100
155
130
7.5
CKOG Textured bullnose†
grey
7173
200
-
100
155
130
7.5
130mm
155mm
44mm
HBKOB/HBKOG Half batter kerb outlets
155mm 44mm
200mm
200mm
44mm
*
130mm
155mm
FBKOB/FBKOG Full batter kerb outlets
200mm
130mm
BNKOB/HBNKOG/CKOG Bullnose kerb outlets
Pre-formed Ø110mm round knockout for vertical outlet.
† For G080 only. Note: As with all pre-cast products, polymer concrete units are subject to dimensional and weight tolerances.
11
ACO CivicDrain® Channel Footpath Drainage PARTS TABLE Corner unit 3-way connector (G0100 only)
Description
Colour
Order no.
Dimensions (mm) Depth Overall Invert
TO2B Corner unit
buff
4692
100
85
100
150
155
3.0
TO2G Corner unit
grey
4694
100
85
100
150
155
3.0
Width Bore
Overall
Length
Weight (kg)
150mm
100mm
100mm
155mm
155mm
TO2B/TO2G Corner unit 3-way connector Endcaps for corner unit
Description
Colour
Order no.
Dimensions (mm) Depth Overall Invert
4844 Closing
buff
4844
100
-
-
130
20
0.5
4848 Closing
grey
4848
100
-
-
130
20
0.5
Width Bore
Overall
Length
Weight (kg)
100mm
20mm
20mm 130mm
4844/4848 Closing endcap
Inlet/downpipe connector
Order no.
Dimensions (mm) Depth Overall Invert
Width Bore
Overall
Length
Weight (kg)
DCO1B Downpipe connector buff
4607
80
65
100
150
155
2.6
DCO1G Downpipe connector grey
4681
80
65
100
150
155
2.6
DCO2B Downpipe connector buff
1466
100
85
100
150
155
3.2
DCO2G Downpipe connector grey
1467
100
85
100
150
155
3.2
12
155mm
150mm
80mm
155mm
155mm
155mm
150mm
Colour
100mm
Description
Ø75mm
Ø75mm
Ø85mm
Ø85mm
DCO1B/DCO1G Downpipe connector
DCO2B/DCO2G Downpipe connector
Note: As with all pre-cast products, polymer concrete units are subject to dimensional and weight tolerances.
ACO CivicDrain® Channel Footpath Drainage PARTS TABLE FOR G080/G0100 ONLY Overlay Gratings - Load Class A15
Description
Order no.
Dimensions (mm) Width Overall Length
Slotted galvanised steel 403
6303
127
1000
3
1.6
Slotted galvanised steel 404
6304
127
500
3
0.8
Slotted stainless steel 407*
6318
127
1000
3
1.6
Slotted stainless steel 408*
6319
127
500
3
0.8
Description
Order no.
Dimensions (mm) Width Overall Length
Flange Thickness
Weight (kg)
Slotted galvanised steel 405
6300
127
1000
4
2.9
Slotted galvanised steel 406
6301
127
500
4
1.5
Galvanised steel mesh 413*
6305
127
1000
3
3.3
Galvanised steel mesh 414*
6306
127
500
3
1.7
Description
Order no.
Dimensions (mm) Width Overall Length
Flange Thickness
Weight (kg)
Cast iron slotted 500
6314
127
500
5
2.9
‘Heelguard’ ductile iron 501
6350
127
500
5
3.2
Cast iron solid cover 511
6320
127
500
5
3.8
Flange Thickness
Weight (kg)
Slotted galvanised steel
Flange Thickness
Weight (kg)
Slotted stainless steel
Overlay Gratings - Load Class B125
Slotted galvanised steel
Galvanised steel mesh
Overlay Gratings - Load Class C250
Cast iron slotted
‘Heelguard’ ductile iron
Cast iron solid cover
Locking
Description
Order no.
Dimensions (mm) Width Overall Length
Locking assembly for slotted galvanised steel 808
6309
-
-
-
0.1
Locking assembly for slotted stainless steel * 806
6316
-
-
-
0.1
Locking assembly for galvanised steel mesh* 809
6308
-
-
-
0.1
Locking assembly for all cast iron gratings and cover 812
6317
-
-
-
0.1
13 *
These gratings and locking assemblies are available to special order. Please contact ACO Customer Support Team for availability.
Note: The channel Standard EN 1433:2002 recommend locking at Load Class C.
ACO CivicDrain速 Channel Footpath Drainage INSTALLATION DETAILS (LOAD CLASS A TO C) 1.0 Ground Conditions The customer should ensure that the minimum dimensions shown are suitable for the existing ground conditions. Engineering advice may be necessary.
Block and Paving Slab Pavements Block Bedded securely (See Note 3)
Detail A
2 Load Class B and C
1 Load Class A Block or paving
Block or paving
2.0 Overlay Gratings (Detail A) The relationship between finished pavement level and the channel will depend upon the overlay grating type chosen. Refer to Detail A below and Page 13 for flange thickness. It is important to ensure that the edges of the grating are isolated from any floor/pavement finishes.
Concrete bed and Haunch Minimum C25
150mm min
Approx 225mm
Approx 225mm
3.0 Block and Paving Slab Pavements The channel must be supported laterally and therefore blocks and paving slabs must be restrained from movement by bedding securely e.g. by using a Polymer Modified Mortar for bed and perpendicular joints (for example RONAFIX Mortar Mix C from Ronacrete: Tel 01279 638 700). Engineering advice may be required.
Detail A 3mm generally Flange see page 13 Grating
4.0 Joint Sealant Where ACO Drain channel joints and fittings are to be sealed (where used in foul water applications or where impermeability is required) contact a sealant specialist for guidance on the most appropriate sealing compound to use.
14
Block or paving slabs See notes 2.0 and 3.0
Channel Wall
ACO CivicDrain® Channel Footpath Drainage SPECIFICATION CLAUSE Model specification clause The surface drainage system shall be ACO CivicDrain® Channel Footpath Drainage system as supplied by ACO Technologies plc; all materials and components within the scope of this channel system shall be obtained from this manufacturer. The system shall be certificated to Load Class ( * ) as defined in EN 1433:2002, load test certificates for both grating/cover and channel body shall be supplied to the Supervising Officer. The system shall be of 100mm nominal internal width.
The channels shall be installed with manufacturer’s grating appropriate to the Load Class of the place of installation and locked securely in place using the manufacturer’s locking system. The system shall be installed in accordance with the manufacturer’s printed instructions, and the work carried out as specified on drawing no. ( * ) and in accordance with recognised good practice. Standards of workmanship shall generally be as specified in BS EN 752:Parts 1-4 and BS 8000:Part 14:1989.
*
insert appropriate information
Note: Also available on our website for downloading
Technical Support Services To support architects, engineers and contractors in designing and installing ACO CivicDrain® Channel Footpath Drainage schemes, ACO Drain Design Services Department offers computer-aided scheme design, hydraulic performance calculations and installation advice services. Our Telephone Hotline 01462 816666, Fax Hotline 01462 851081, e-mail draintechnical@aco.co.uk and website www.aco.co.uk enable us to give you the response you need.
15
ACO Technologies Plc
International Enquiries
ACO Business Park, Hitchin Road, Shefford, Bedfordshire SG17 5TE
Tel: +44 (0)1462 816666 Fax: +44 (0)1462 850957 e-mail: international@aco.co.uk website: www.aco.co.uk
Tel: 01462 816666 Fax: 01462 815895 e-mail Sales: customersupport@aco.co.uk e-mail Technical: draintechnical@aco.co.uk website: www.aco.co.uk
Š April 2005 ACO Technologies Plc. All reasonable care has been taken in compiling the information in this document. All recommendations and suggestions on the use of ACO products are made without guarantee since the conditions of use are beyond the control of the Company. It is the customer's responsibility to ensure that each product is fit for its intended purpose, and that the actual conditions of use are suitable. This brochure and any advice is provided by ACO Technologies Plc (the Company) free of charge and accordingly on terms that no liability including liability for negligence will attach to the Company or its servants or agents arising out of or in connection with or in relation to this brochure or any such advice. Any goods supplied by the Company will be supplied solely upon its standard conditions of sale, copies of which are available on request. The Company's policy of continuous product development and improvement renders specifications liable to modification. Information provided in this brochure is therefore subject to change without prior notification.