Milestek 2014 Spring/Summer General Catalog by .. ..

INTRODUCTION

Ordering Information

PHONE ORDERS AND TECHNICAL SERVICE: 1-800-524-7444 or 940-484-9400 INTERNET ORDERS: www.milestek.com – 24 hours a day, 7 days a week

ORDERS: Telephone, fax or mail orders welcomed. Most items are in stock; If partial shipment requested, shipping/handling charges will be added to each shipment. F.O.B. POINT: Shipping Point. Freight charges are added to invoice. PRICES: Subject to change without notice. PAYMENT TERMS:

Credit Cards: Visa, MasterCard, American Express and Discover accepted.

Prepayment: Money order, company or personal check (personal check will delay order about 2 weeks).

Commercial Open Account: Net 30 terms extended to companies with approved credit. Open account may be set up by faxing, emailing or mailing trade and bank references. Government: MilesTek Corporation is a small business concern. Government (federal, state, county, city school districts, etc.) purchase orders are accepted with Net 30 terms. Government IMPAC Visa/Mastercard is accepted. International: Prices are in United States Dollars and F.O.B. shipping point, excluding any applicable taxes, custom duties or permit fees.

Payment in Advance via one of the following methods is acceptable:

1. Bank Transfer - Wire Routing information is available by request. Please contact our Accounts Receivable department at AR@milestek.com or by phone 940-484-9400. Please add $25.00 to your wire transfer to cover our bank charge for the wire transfer.

7 a.m. to 6 p.m., Central Time, M-F, except holidays. Fax Orders: 940-484-9402 – 24 hours a day, 7 days a week WARRANTY: MilesTek warrants its products to be free from defects of workmanship and material. If any such defects occur,replacement will be made without charge to our customers. This warranty does not cover normal wear and tear, or abuse. The warranty period depends upon the product.

RETURN POLICY: All returns must have MilesTek authorization with return authorization number. All returns must be made within 30 days from shipment date and will be subject to a 20% restocking fee. RMA will be issued, but shipment of products back to MilesTek is customer’s responsibility. Shipping charges for returns due to MilesTek error or evaluation for defect, will be covered at MilesTek’s expense. RMA will be issued along with shipping label and instructions. Products MUST be in original packaging, not be damaged or marked on in any way, and contain all original piece parts. Any items that are returned and are not in re-sellable condition will not be considered for credit. For full version of MilesTek’s return policy, visit our website at MilesTek.com. TRADE MARKS: All trade marks referenced are the service marks or trademarks of their respective owners.

DISPUTE RESOLUTION: It is hereby agreed and understood that any dispute, difference or disagreement of any kind whatsoever, whether statuary or contractual, which arises from the services/products provided or relates in any way to the general business relationship of the parties to this agreement, shall be, as the sole available remedy, resolved through mediation or binding arbitration, rather than litigation. Any such mediation or arbitration shall be governed by the Federal Arbitration Act and conducted in accordance with the Rules of Mediation and Arbitration.

Quick Order:

Instantly place items in your cart just by entering the part numbers. Multiple part number entry is supported. Just one click from anywhere on the site from the Acct/Order Management at the top of every MilesTek.com page.

2. Cashier's Check, Certified Check or International Money Order - Check must be payable in US Dollars. Sending check or money order via overnight courier will improve service.

3. Company Check - Check must be drawn on a US Bank and is subject to MilesTek approval of sufficient funds.

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T

INTRODUCTION

Easy Online Ordering Quick summary of some of our website’s features: • Our websiteÊs Cable Assembly Wizard helps you find the assembly you need · Search by cable type and connector ends · Create a custom-length cable assembly, and place it in your cart to purchase. · Same-Day Shipping! · Supports Metric (cm) or English (inch) lengths • Find Adapters quickly and easily with our Adapter Wizard • New homepage Quick-Order feature allows fast and easy ordering from any MilesTek catalog or milestek.com • Over 10,000 products available, including products for Mil-Std-1553B, DS3 Telecom, and Ethernet Networking! • Enhanced security features · PCI Compliant and high-encryption keeps your sensitive information 100% secure We hope you find MilesTek.com provides the excellent experience you deserve.

Save 5% off general catalog pricing by placing your order online.

Inventory Search:

You can find the products you need quickly and easily. Search by keyword, MilesTek part number and even by manufacturer's part number.

Order Status:

Our site now has a new order status function that allows customers to view the current status of any open or shipped order that was placed either over the web or over the phone, and provides customers with the ability to drill right down to the item detail level on each order. Our new order status function also allows customers to view their assigned tracking numbers for all UPS shipments, and provides a link to allow customers to directly view tracking information for these numbers through the UPS Tracking System.

Account Management:

We have located all the account and order management tools within one click from anywhere on our site. Just click on the Acct/Order Management link at the top of any page. Once you are logged into the site, you can change passwords, contact information, and review purchasing history.

Web Order Purchasing History:

View web orders you've placed by date or invoice number and go to individual orders to view all their detail.

For Expert Customer Service, Call Our Sales Team Today!

Shipping Options:

We’ve added the ability to select expedited shipping. Customers can also enter their own UPS or FedEx account number for their order. UPS is MilesTek’s standard/preffered carrier.

Shopping Menu:

Navigate easily throughout our site and go directly where you need to go fast with our new shopping menu.

Download Catalogs:

Now you can download our latest catalogs and see our latest products even before they hit your mailbox.

A More Intuitive Design:

Our new stylish design is simple and easy to navigate. We've chosen colors that are easy on your eyes and page layouts that are clear and easy to follow.

Technical Blogs, Videos and Information:

Our new technical blog provides an interactive forum for technical discussion regarding current and relevant industry trends. Check out our new application videos for MIL-AERO/MIL-STD-1553B and DS3 Telco Central Office business applications. Technical drawings are available for many devices, cables and connectors.

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

INTRODUCTION

The MilesTek Advantage

Dear Valued Customer,

For over 30 years, our commitment to quality and service as a complete connectivity solutions provider has helped MilesTek gain the trust of thousands of corporate, IT/networking, education, broadcast, telcom, houses of worship, and other end-user professionals all over the world. MilesTek would like to introduce our new 72-page 2014 General Catalog, which contains an updated offering of our top selling core products along several new product solutions. Organized sections include Networking, AV Distribution, Coaxial, Racks & Accessories, and Cable Management.

We’re excited to now provide even greater service and product options to our customers through our recent acquisition by L-Com. L-Com, a global designer and manufacturer of wired and wireless connectivity products, offers a wide range of solutions including cable assemblies, connectors, adapters, industrial networking components, and custom connectivity products, as well as a broad line of wireless products.

We invite MilesTek customers to check out L-Com’s product offering at L-Com.com. Then contact MilesTek for pricing and availability on any items that fit your application, which can be easily added to your order of MilesTek product.

Our customers have come to expect more than just products – they expect solutions to their project challenges and are seeking unbeatable values. We take great pride in being easy to do business with, while delivering the expertise you need with service and value you cannot find anywhere else. MilesTek service consultants are standing by to support your installation projects. Contact MilesTek today! For the very latest products and best pricing (Save 5% off general phone/catalog pricing), please continue to visit and order at MilesTek.com

Technical expertise, customer service and unbeatable value – that’s the MilesTek Advantage.

Networking .............................. 3 - 15 CAT5E and CAT6 Bulk Cable Wall Plates and Jacks / Patch Cords and Panels Network Ethernet Switches / Media Converters

AV Distribution ....................... 16 - 54 HDMI / VGA/ DVI / Component Video Composite Video / AV Over CAT5 / Wall Plates

Coaxial .................................. 55 - 63 Connectors and Adapters / Bulk Cable Cable Assemblies / Tools / Racks / Panels

Racks & Accessories ................ 64 - 75 Rack Enclosures / Wall Mount Racks / Rack Shelves Horizontal Managers / Ladder Racks

Cable Management ................ 76 - 81 Surface Raceway System / In-Wall Raceway Ducting Tools / Cable Ties

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T

NETWORKING

CAT5E/CAT6 Bulk, RJ45 Plugs CATEGORY UTP CABLE

Today's advanced fast ethernet and gigabit computer networks require CAT5E or CAT6 high-speed cabling to distribute data, voice and video. Our CAT5E cables will handle bandwidth intensive applications up to 350 MHz and beyond. The CAT6 standard addresses the need for improving the performance of twisted pair cabling to support emerging high-speed applications. The transmission parameter requirements exceed CAT5E and are specified up to 550 MHz. For complete specifications on our category cables, visit www.milestek.com

CAT5E 350 MHz Solid

CAT6 550 MHz Solid

CMR or CMP Rated • 24 AWG / 4 Pair

CMR or CMP Rated

PVC 1000’ PULL BOX PLENUM 1000’ PULL BOX 30-50013-Black 30-50014-Black 30-50013-Blue 30-50014-Blue 30-50013-Gray 30-50014-Gray 30-50013-Green 30-50014-Green 30-50013-Orange 30-50014-White 30-50013-Red 30-50014-Yellow 30-50013-White · 30-50013-Yellow · PRICE PRICE $115.50 $236.25

PVC 1000’ PULL BOX 30-60013-Black 30-60013-Blue 30-60013-Gray 30-60013-Green 30-60013-Orange 30-60013-Red 30-60013-White 30-60013-Yellow PRICE $172.20

NOTE: Due to continuing fluctuation in the cost of copper, our category UTP bulk cable pricing is subject to change without notice.

COMMUNICATION CABLE Flat Silver Satin Cable

PART # DESCRIPTION 30-04024-1K Blue/White Pair $66.15 PRICE

PART # DESCRIPTION 30-04001-1K 4-Conductor 30-04002-1K 6-Conductor

1,000 FT. ROLLS

24 AWG / 4 Pair • Solid BC • 1000 ft. PART # 30-50112

PRICE $52.50 $62.40

50 ø" of gold plating

PART # 10-23063 10-23063-BP 10-23061 10-23061-BP 10-23062 10-23062-BP

COLOR Black

PRICE $215.25

DESCRIPTION RJ45 8C8P 2OP Solid Bulk Pack (100) RJ11 4C Solid/Stranded Bulk Pack (100) RJ11 6C Solid/Stranded Bulk Pack (100) PART # 10-99033 10-99034 10-99035 10-99036 10-99046 10-99047 10-99048 10-99049 10-99050 PRICE

RJ45 Plug Boots

DESCRIPTION RJ11, 4-Conductor RJ12, 6-Conductor RJ22, Handset

PRICE $0.17 $0.22 $0.32

MilesTek Universal Crimper * Not compatible with AMP plugs

For Expert Customer Service, Call Our Sales Team Today!

PRICE $393.75

CAT5E Direct Burial Cable

Flat Satin Plugs

PART # 40-12161 40-12061 40-12162 40-12062

PLENUM 1000’ PULL BOX 30-60014-Black 30-60014-Blue 30-60014-Gray 30-60014-Green 30-60014-Orange 30-60014-White · ·

RJ45 and RJ11 Modular Plugs

Cross Connect Wire

PART # 10-23051 10-23052 10-23050

• Rated • 23 AWG / 4 Pair

DESCRIPTION Frame w/ RJ45* RJ45 Die Set* Frame w/ RJ11* RJ11 Die Set*

PRICE $44.09 $21.71 $44.09 $21.71

PRICE $0.29 $25.20 $0.29 $25.20 $0.29 $25.20

COLOR White Ivory Gray Black Red Yellow Blue Green Orange $0.21

UTP Cable Stripper/Cutter

PART # DESCRIPTION 40-40071 Stripper/Cutter

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $7.88

NETWORKING

Tools, Modular Adapters/Couplers

EZ-RJ45 Plugs & Tools ®

3 EZ Steps to Perfect Terminations 1 Strip & prepare cable, slide conductors straight through EZ connector

2 Verify proper wiring order

40-40371

3 Crimp connector & trim excess wire in one step with the EZ-RJ45 ® Crimp Tool!

40-40630

The one-piece EZ-RJ45® connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front for verifying the proper wiring order. Reducing the distance between the wire twists and contacts, electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. The crimp tool crimps and trims in one cycle. PART # 10-23087 10-23087-100 10-23089 10-23089-100 10-23090 10-23090-100 10-23088 10-23088-100 10-99073 10-99074 10-99075 10-99076 10-99077 40-40371 40-40630

DESCRIPTION CAT5E EZ-RJ45® Plugs, 50 Pack CAT5E EZ-RJ45® Plugs, 100 Pack EZ-RJ11® Plugs, 50 Pack EZ-RJ11® Plugs, 100 Pack Shielded CAT5E/CAT6 EZ-RJ45, 50 pk Shielded CAT5E/CAT6 EZ-RJ45, 100 pk CAT6 EZ-RJ45® Plugs, 50 Pack CAT6 EZ-RJ45® Plugs, 100 Pack CAT6 Boot Blue 50 Pack CAT6 Boot Gray 50 Pack CAT6 Boot Green 50 Pack CAT6 Boot Yellow 50 Pack CAT6 Boot Black 50 Pack Crimp Tool Pro Crimp Tool

PRICE $33.08 $65.05 $18.74 $36.70 $81.38 $157.50 $37.38 $73.45 $9.85 $9.85 $9.85 $9.85 $9.85 $65.10 $91.30

Network Installer Kit • EZ-RJ45® Crimp Tool • 100 EZ-RJ45® CAT5E Connectors • Round Cable Cutter • 12 Tray Tote Bag • Universal Stripper/Cutter • Replacement Blades • Pro Punchdown Tool Handle • Pro Punchdown Tool 110 Bit & 66 Bit PART # DESCRIPTION 40-50288 Network Installer Kit

Uni-Network Tester

This compact tester with remote tests continuity of individual wires in either automatic or manual mode. Accepts both RJ45 and RJ11 plugs. Includes BNC Adapter cables, case and 9V Battery.

PRICE $248.73

PART # 40-30089

Modular Adapters/Couplers

KEY A B C D

PART# 10-23952 10-23941 10-23942 10-23946 10-23948

DESCRIPTION CAT5e RJ45 Coupler RJ11 4C Coupler RJ11 6C Coupler CAT5e Insert Coupler CAT6 Insert Coupler

DESCRIPTION Uni-Network Tester

PRICE $91.82

MilesTek Pro Punchdown Tool PRICE $2.40 $0.37 $1.35 $3.75 $6.00

• Integrated bit storage in handle • Adjustable tension setting • Ergonomic handle with cushioned grip

KEY A B C

PART# 40-40303 40-40304 40-40305

DESCRIPTION Punchdown Tool 110 Bit 66 Bit

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $26.88 $7.80 $7.88

Stock Orders Shipped Same Day until 5 P.M. C.S.T

NETWORKING

Milestek Jacks MILESTEK SNAP IN JACKS

The keystone jacks are individually terminated using 110 termination method for quick installation. User instructions and basic wiring layouts for standard configuration are included.

AV SNAP IN JACKS

CAT5E Jacks

PRICE

$2.76

PART # 60-06524 60-10524 60-16524 60-19524 60-18524

COLOR Ivory White Red Blue Yellow

PART # 60-25524 60-15524 60-17524 60-08524 60-07524

COLOR Off. White Black Green Orange Light Almond

PART # 60-25624 60-15624 60-17624 60-08624

COLOR Off. White Black Green Orange

PART # 60-25136 60-15136 60-17190 60-08190 60-07190

COLOR Off. White Black Green Orange Light Almond

CAT6 Jacks

PRICE

$3.94

PART # 60-06624 60-10624 60-16624 60-19624 60-18624

COLOR Ivory White Red Blue Yellow

RJ11 Jacks

PRICE

$2.10

PART # 60-06190 60-10190 60-16190 60-19190 60-18190

COLOR Ivory White Red Blue Yellow

3.5 mm

USB/A

HDMI

BNC

PART # 60-40001 60-40002 60-40003 60-40004 60-40005 60-10152 60-25197 60-06197 60-15197

DESCRIPTION 3.5mm Snap In Jack White USB/A F/F Mini Snap In Jack White USB/B F/F Mini Snap In Jack White HDMI F/F Snap In Jack Ivory HDMI F/F Snap In Jack BNC Insert - White BNC Insert - Office White BNC Insert - Ivory BNC Insert - Black

RCA to RCA Feedthroughs

Jack Terminator Tool Kit

For MilesTek CAT5E and HellermannTyton CAT5E/CAT6 Jacks This new patented product allows professionals to significantly reduce the time it takes to terminate CAT5E communication cables into standard wall jacks. In one simple action, 4 pairs of wires are terminated and the built-in blades cut off the excess wire, eliminating the need for a secondary trim step. • High-grade, hardened steel frame offers superior performance and durability • Ratcheted action to ensure proper, consistent termination

PART # 60-06226 60-10226 60-25226 60-06221 60-10221 60-25221

JACK White White White Red Red Red

MODULE Ivory White Off. White Ivory White Off. White

RCA to F-Type Feedthroughs

• Removable jack cradle allows for alternate lacing option

• Lifetime Warranty (crimper frame only).

PART # 40-50400

DESCRIPTION Jack Termination with Punchdown Head-Set For MilesTek CAT5E Jacks Only (not CAT6) and HT Jacks (RJ45FC5E, RJ45FC6)

PRICE $97.23

Binding Post Modules

SOLD IN PAIRS. Each pair includes one module with a red stripe and one with a black stripe. PART # 60-06137 60-06152 60-06138

For Expert Customer Service, Call Our Sales Team Today!

DESCRIPTION Binding Post Binding Post Binding Post

COLOR White Ivory Off, White

PRICE $6.93 $6.93 $6.93

PRICE

USB/B

$4.01

PART # 60-06219 60-10219 60-25219 60-06227 60-10227 60-25227 60-06228 60-10228 60-25228

PRICE $3.94 $3.29 $3.29 $6.56 $6.56 $4.45 $4.45 $4.45 $4.45

PART # JACK 60-06220 Yellow 60-10220 Yellow 60-25220 Yellow 60-06222 Black 60-10222 Black 60-25222 Black 60-06299 Blue 60-10299 Blue 60-25299 Blue 60-06277 Green 60-10277 Green 60-25277 Green PRICE DESCRIPTION Red RCA to F Red RCA to F Red RCA to F Yellow RCA to F Yellow RCA to F Yellow RCA to F Black RCA to F Black RCA to F Black RCA to F

F-Type Jacks

MODULE Ivory White Off. White Ivory White Off. White Ivory White Off. White Ivory White Off. White $3.62 COLOR Ivory White Off. White Ivory White Off. White Ivory White Off. White

Blank Fillers PART # 60-06191 60-10191 60-25191 PRICE

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

COLOR Ivory White Off. White $1.34

PART # 60-06192 60-10192 60-25192 PRICE

Sold in 10 Pack

COLOR Ivory White Off. White $2.10

NETWORKING

Wall Plates, Surface Mount Boxes

MILESTEK WALL PLATES

RECESSED CABLE PLATE

These wall plates are ideal for the installation of keystone jacks, "F" TV connectors or ST, SC fiber optic connectors, available in 1, 2, 3, 4 and 6-port or blank.

Single Gang Plate

Flush-Mount Wall Plates

Dual Gang Plate PART # 60-06144 60-10144 60-20444 60-06145 60-10145 60-20105 60-07512 PRICE

DESCRIPTION 6-Port Ivory 6-Port White 6-Port Off. White 12-Port Ivory 12-Port White 12-Port Off. White 12-Port Lt. Almond $3.62

PART # 60-06501 60-10501 60-25501 60-07501 60-06502 60-10502 60-25502 60-07502 60-06503 60-10503 60-25503 60-07503 60-06504 60-10504 60-25504 60-07504 60-06506 60-10506 60-25506 60-07506 PRICE

DESCRIPTION 1-Port Ivory 1-Port White 1-Port Off. White 1-Port Lt. Almond 2-Port Ivory 2-Port White 2-Port Off. White 2-Port Lt. Almond 3-Port Ivory 3-Port White 3-Port Off. White 3-Port Lt. Almond 4-Port Ivory 4-Port White 4-Port Off. White 4-Port Lt. Almond 6-Port Ivory 6-Port White 6-Port Off. White 6-Port Lt. Almond $0.92

Stainless Multi-Access Faceplates Single Gang Plate PART # 60-03033 60-03034 60-03035 60-03036 PRICE

DESCRIPTION 1-Port 2-Port 4-Port 6-Port $2.52

Use these new recessed low voltage cable plates to install low voltage cables behind your flat panel TV, your amplifier or other audio and video devices. These recessed low voltage cable plates are designed for use with Low Voltage / Data cables only. PART # DC-45-0001-BR DC-45-0001-LA DC-45-0001-WH DC-45-0001-BK DC-45-0002-BR DC-45-0002-LA DC-45-0002-WH DC-45-0003-WH DC-45-0003-BK

DESCRIPTION 1 Gang Recessed Cable Plate Brown 1 Gang Recessed Cable Plate Almond 1 Gang Recessed Cable Plate White 1 Gang Recessed Cable Plate Black 2 Gang Recessed Cable Plate Brown 2 Gang Recessed Cable Plate Almond 2 Gang Recessed Cable Plate White 3 Gang Recessed Cable Plate Almond 3 Gang Recessed Cable Plate Black

PRICE $2.78 $2.78 $2.78 $2.78 $3.73 $3.73 $3.73 $6.69 $6.69

Surface Mount Boxes

Surface mount boxes feature a compact low profile outline. They are ideal where internal wall access is not available. Boxes have knockouts on three sides to mate with HellermannTyton’s raceway. Easy to install and can be fastened to virtually any surface.

Compatible with Milestek Jacks

Dual Gang Plate PART # 60-03037 60-03038 60-03039 PRICE

DESCRIPTION 4-Port 6-Port 12-Port $4.15

PART # 60-05211 60-05212 60-05213 PRICE

DESCRIPTION 2-Port Ivory 2-Port White 2-Port Office White $2.56

PART # 60-05214 60-05215 60-05216 PRICE

DESCRIPTION 4-Port Ivory 4-Port White 4-Port Office White $4.22

PART # 60-05208 60-05209 60-05210 PRICE

DESCRIPTION 6-Port Ivory 6-Port White 6-Port Office White $7.88

CAT5E Surface-Mount Jacks Mounting Brackets

PART # DESCRIPTION 60-01003 1-Gang Plastic Mounting Bracket - MP1P 60-01006 1-Gang Metal Mounting Bracket - MP1S

PRICE $1.54 $2.07

Category 5e surface-mount jacks are the printed circuittype, to meet 100 MHz requirements. A tie wrap attached to the circuit board provides cable strain relief. The lids are held by a screw for secure mounting. Wall plates have a double-sided, adhesive pad for mountingthey may also be screw-mounted. The single CAT5e surface-mount jack is compact, measuring 2 5/8”w x 13/4”d x 13/8”h. The duplex model measures 2 5/8”w x 2 5/8”d x 13/8”h. Ivory.

PART # DESCRIPTION 60-06193 CAT5e Single Surface-Mount 60-06194 CAT5e Duplex Surface-Mount

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $4.20 $8.75

Stock Orders Shipped Same Day until 5 P.M. C.S.T

NETWORKING

CAT5E/CAT6 Patch Cords, Panels MILESTEK PATCH CORDS

Perfect for distributing data, voice and video, our patch cables ensure you always have the necessary throughput to bandwidthintensive applications. Our CAT5E patch cords are tested to 350 MHz for high-speed applications. CAT6 patch cords are designed to pass 10/100/1000 Mbp traffic through a Gigabit network without latency from the physical layer. Booted to prevent unwanted network failures or cable snag during usage, and molded to help with strain relief.

CAT6 Patch Cords - featuring a snagless strain relief. Gray Blue White Red

26-260-xxx 26-261-xxx 26-262-xxx 26-263-xxx

LENGTH (FT) xxx Part # PRICE

Black Green Yellow Orange

26-264-xxx 26-265-xxx 26-266-xxx 26-267-xxx

1’ 12 $1.35

3’ 5’ 7’ 10’ 14’ 25’ 36 60 84 120 168 300 $1.95 $2.55 $3.15 $4.36 $5.85 $9.00 Replace the xxx with the needed length in inches Example: 26 260 36 = 3 ft.

CAT5E 350 MHz Stranded EZ-Latch Snag Free Patch Cords Gray Blue White Red

26-250-xxx 26-251-xxx 26-252-xxx 26-253-xxx

LENGTH (FT) xxx Part # PRICE

Black Green Yellow Orange 1’ 12 $1.05

26-254-xxx 26-255-xxx 26-256-xxx 26-257-xxx

3’ 5’ 36 60 $1.44 $1.81

7’ 84 $2.25

14’ 25’ 168 300 $3.75 $6.46

Example: 26-250-36 = 3 ft.

Replace the xxx with the needed length in inches

CAT5E 350 MHz Stranded Conductor Non-Booted Patch Cords Gray Blue White Red

26-200-xxx 26-201-xxx 26-202-xxx 26-203-xxx

LENGTH (FT) xxx Part # PRICE

Black Green Yellow Orange

1’ 12 $1.05

26-204-xxx 26-205-xxx 26-206-xxx 26-207-xxx

3’ 36 $1.44

5’ 7’ 10’ 14’ 25’ 60 84 120 168 300 $1.81 $2.25 $3.00 $3.75 $6.46

Replace the xxx with the needed length in inches

MILESTEK PATCH PANELS

10’ 120 $3.00

Example: 26-200-36 = 3 ft.

Our pre-configured RJ45 Cat5E and CAT6 patch panels are suitable for level connecting or terminal connecting. CAT5E panels are

available with 24, 48 or 96 ports. CAT6 panels are available with 12, 24 or 48 ports.

CAT6 Patch Panels

CAT5E Patch Panels

• 19-inch rack-mountable • Multi-port modular jacks, compact size 50 microns gold-plated pin contacts • Accept 22-26 AWG solid with insulation diameter of 0.4 - 0.64mm • Used for any standard 483mm rack • Plug insertion life 750cycles min • Each patch panel is compatible with T568A and T568B wiring schemes • CAT6 panels are fully compatible with Gigabit Ethernet • Can easily be terminated with single pair or multi-pair impact tool

PART # PORTS 50-44083 12 50-44081 24 50-44082 48

PRICE $66.00 $75.00 $144.00

PART # PORTS 50-44080 12, Vertical

PRICE $75.00

RJ45 Cat5E patch panels have 110 punchdown connectors.

See page 69 for Hinged Panel Mounts

PART # PORTS 50-44052 12, Vertical 50-44066 24 50-44067 48 50-44068 96

PRICE $50.00 $57.00 $105.00 $270.00

CAT5E Front Access Patch Panels

• All connections from front panel • Front covers hide 110 terminations • 24 port model surface or rack mountable

PART # PORTS 50-44026 12 50-44027 24

PRICE $67.50 $133.50

MILESTEK WIRING BLOCKS 110 Wiring Block Kit

Vertical 50-pair 110 wiring block kit has 4 & 5-pair clips, ID holder, label, and bracket. Horizontal 100 & 300-pair 110 wiring block kits have wiring blocks with legs, 4 & 5-pair clips PART # DESCRIPTION and two ID holders with labels. 50-44029 Horizontal 100-Pair

For Expert Customer Service, Call Our Sales Team Today!

Type-66 Connecting Block

Type-66 punchdown block is suitable for CAT5e and voice applications. The 89D mounting block holds the 66 block, allowing wires to be routed behind it.

PRICE 28.85

PART # DESCRIPTION 50-44017 66 Punchdown Block w/cover 50-44018 Bridging Clips Bag of 25 50-44014 89D Mounting Block

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $11.99 $2.63 $2.00

NETWORKING

Leviton Jacks, Wall Plates, Panels

Leviton QuickPort Snap-In Modules for Voice & Data

CAT5e Gigamax Jacks

RJ11 6C Modules

PART NO. LE-5G108-RI5 LE-5G108-RW5 LE-5G108-RG5 LE-5G108-RE5 LE-5G108-RO5 LE-5G108-RL5 LE-5G108-RR5 LE-5G108-RY5 LE-5G108-RB5 LE-5G108-RT5 LE-5G108-RV5 LE-5G108-RP5 LE-5G108-RC5 PRICE

PART NO. LE-41106-RI6 LE-41106-RW6 LE-41106-RG6 LE-41106-RE6 LE-41106-RO6 LE-41106-RL6 LE-41106-RR6 LE-41106-RY6 LE-41106-RB6 LE-41106-RT6 LE-41106-RG6 LE-41106-RP6 LE-41106-RC6 PRICE

COLOR Ivory White Gray Black Orange Blue Dark Red Yellow Brown Lt. Almond Green Purple Crimson Red $4.70

COLOR Ivory White Gray Black Orange Blue Dark Red Yellow Brown Lt. Almond Green Purple Crimson Red $2.91

Jack Terminator Tool Kit

For Leviton CAT5E/CAT6 Jacks

This new patented product allows professionals to significantly reduce the time it takes to terminate CAT5E and CAT6 communication cables into standard wall jacks. In one simple action, 4 pairs of wires are terminated and the built-in blades cut off the excess wire, eliminating the need for a secondary trim step. • High-grade, hardened steel frame offers superior performance and durability • Ratcheted action to ensure proper, consistent termination • Adjustment feature for extra leverage applications • Quick-change punch sets require no tools • Removable jack cradle allows for alternate lacing option

• Rubber-embedded handles provide extra comfort.

• Lifetime Warranty (crimper frame only).

CAT5E Patch Panels

FEATURES: • The panels shall PART # DESCRIPTION PRICE feature both T568A LE-5G596-U89 12 Port Vertical Mount $98.39 and T568B wiring LE-5G596-U12 12 Port Rackmount $114.57 configurations, LE-5G596-U24 24 Port Rackmount $153.51 white IDC 110LE-5G596-U48 48 Port Rackmount $306.97 punchdown modLE-5G596-U96 96 Port Rackmount $579.62 ules, mounting standoffs for cable management bars, color-coded front window labeling, and a termination standoff for patch panel earthing/grounding. • The panels have universal T568A and T568B wiring cards for terminations. • The panels are made of 16 gauge steel, and have a black painted finish with white silk-screening. • The plastic elements are fire-retardant with a UL flammability rating of 94V-0. • The 110 termination on the rear of the panel follows normal installation color sequence (blue, orange, green, brown) from left to right.

PART # LE-61110-RI6 LE-61110-RW6 CAT6+ eXtreme LE-61110-RT6 LE-61110-RL6 RJ45 Jacks These 8-position, 8-conductor Connectors LE-61110-RR6 feature dual-color-coded wiring labels with LE-61110-RO6 both T568A and T568B wiring patterns, LE-61110-RY6 QuickPort compatibility, and a 110-style rear termination field for easy termination LE-61110-RV6 of a jack while installed in a wallplate or LE-61110-RE6

field-configurable panel.

PRICE

COLOR Ivory

White Lt. Almond Blue Dk Red Orange Yellow Green Black $8.48

PART #

DESCRIPTION Jack Terminator with Punchdown Head-Set For Leviton 40-50401 CAT5E Jacks (41106, 41108, 5G108) 40-50402

Punchdown Head Set for Leviton CAT6 Jacks (61110, 5G110, 6110G)

PRICE $97.23 $41.08

CAT6+ eXtreme Patch Panels

Set the bar higher for mechanical and electrical excellence with Leviton’s new, craft-friendly, 110-style eXtreme 6+ Universal Patch Panels. These panels feature T568A and T568B wiring compatibility, white IDC 110-punchdown modules, and top-of-the-line, error-free Category 6 performance. Optimized for maximum throughput and a zero bit error rate, these panels also feature Leviton’s unique "Retention Force PART # DESCRIPTION PRICE Technology" for LE-69586-U89 12 Port Vertical Mount $137.24 increased connection LE-69586-U12 12 Port Rackmount $147.14 integrity and LE-69586-U24 $225.26 24 Port Rackmount consistently robust LE-69586-U48 $443.76 48 Port Rackmount performance over LE-69586-U96 $816.74 96 Port Rackmount the life of the system.

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T

NETWORKING

Leviton Wall Plates, Surface Mount Leviton QuickPort® Single-Gang Multi-Port Wall Plates Single-gang flush mount wallplates offer field-configurable flexibility in an attractive single-piece housing. A choice of 1-, 2-, 3-, 4- or 6-ports allows for a variety of configurations and future expansion if needed. The wallplates are fully compatible with all QuickPort Snap-in Modules including connectors or blank fillers. PART # LE-41080-6IP LE-41080-6WP LE-41080-6TP LE-41080-4IP LE-41080-4WP LE-41080-4TP LE-41080-3IP LE-41080-3WP

PORTS 6 Port 6 Port 6 Port 4 Port 4 Port 4 Port 3 Port 3 Port

COLOR Ivory White Lt. Almond Ivory White Lt. Almond Ivory White

PART # LE-41080-3TP LE-41080-2IP LE-41080-2WP LE-41080-2TP LE-41080-1IP LE-41080-1WP LE-41080-1TP PRICE

PORTS 3 Port 2 Port 2 Port 2 Port 1 Port 1 Port 1 Port

COLOR Lt. Almond Ivory White Lt. Almond Ivory White Lt. Almond $1.75

Single Gang Wallplates Decora COLOR Wallplates PART NO. ®

LE-80401-I LE-80401-E LE-80401-GY LE-80401-W LE-80401-T PRICE

Leviton Surface Mount Housing

Compact, highly versatile surface mount housings designed especially for Leviton’s QuickPort® Keystone Jacks, to provide network installers with an economical yet reliable enclosure for multiple voice/data connections. Modular design allows the user to create a unique networking and/or voice solution by loading the housing with CAT 5e, CAT6, video and voice grade jacks. These housings are unloaded, connectors sold separately. • Snap-on locking cover offers convenient accessibility for quick and easy keystone installation, additions, or upkeep • Screws and mounting adhesive included for permanent desktop or wall mount installation

• UL 94 V-0 fire rated

• NEC Article 800 compliant • CSA certified

• UL listed • Additional port and color styles available

PART # LE-41089-2IP LE-41089-2WP LE-41089-4WP

DESCRIPTION Leviton 2-port Surface Mount Housing, Ivory Leviton 2-port Surface Mount Housing, White Leviton 4-port Surface Mount Housing, White

For Expert Customer Service, Call Our Sales Team Today!

PRICE $2.26 $2.26 $4.23

Ivory Black Gray White Lt. Almond $1.00

Dual Gang Wallplates PART NO. LE-80409-I LE-80409-E LE-80409-GY LE-80409-W LE-80409-T PRICE

COLOR Ivory Black Gray White Lt. Almond $2.57

QuickPort Decora® Multimedia Inserts

Combine voice, data, audio and video in one compact, attractive Decora wallplate. Decora Wallplate Inserts offer designer style to match Leviton Decora electrical switches and outlets, with the capacity and flexibility to support high-tech communications for boardrooms or workstations.

PART # LE-41642-00I LE-41642-00W LE-41642-0GY LE-41642-00B LE-41642-00T LE-41642-00E LE-41643-00I LE-41643-00W LE-41643-0GY LE-41643-00E LE-41643-00T LE-41643-00B PRICE

DESCRIPTION 2 Port Ivory 2 Port White 2 Port Gray 2 Port Brown 2 Port Lt. Almond 2 Port Black 3 Port Ivory 3 Port White 3 Port Gray 3 Port Black 3 Port Lt. Almond 3 Port Brown $4.27

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PART # LE-41644-00I LE-41644-00W LE-41644-0GY LE-41644-00E LE-41644-00T LE-41644-00B LE-41646-00I LE-41646-00W LE-41646-0GY LE-41646-00E LE-41646-00T LE-41646-00B

DESCRIPTION 4 Port Ivory 4 Port White 4 Port Gray 4 Port Black 4 Port Lt. Almond 4 Port Brown 6 Port Ivory 6 Port White 6 Port Gray 6 Port Black 6 Port Lt. Almond 6 Port Brown

NETWORKING

Leviton Structured Media

LEVITON STRUCTURED MEDIA CENTERS

LEVITON STRUCTURED MEDIA MODULES 1x6, 1x8 Coaxial

Series 140 Structured Media Center

• Accommodates up to two full-width Pre-Configured Structured Cabling Panels– delivering audio/video, voice and data to any room of the home or office. • Positive “stops” on housing sidewalls prevent the enclosure from falling through studs during installation. • One piece white steel unit holds full and half-width expansion modules. • Can be surface mounted or recessed. Ideal for new installations or retrofits. • Purchase empty or in kits with Pre-Configured Structured Cabling Panels, for easy, one-step home technology solutions. • Mounting guides on the cover align screw-holes and reduce the chances of dropping during attachment. • Powder-coated white cover features a ¾" overlap to hide irregular drywall cuts. • Combine two or more enclosures for larger installations or future expansion. • Multiple knock-outs on top & bottom facilitate cable entry & routing.

PART NUMBER LE-4760514W

DESCRIPTION SMC-140 14' Enclosure & Cover Size: 14.38"H x 14.38"w x 3.60"d

PRICE $42.08

Series 280 Structured Media Centers

• Splits video signals. Outputs for up to 6 or 8 televisions.

• Provide digital cable, cable TV

and other video services, via coaxial cable, to any room in the house.

• Die-cast housing and printed circuit board.

• Use with the Video Amplifier for increased signal strength. • Units come with mounting bracket.

• Gold-flashed contacts on 2.05 GHz units provide lowest conductive resistance.

PART NUMBER DESCRIPTION LE-47690-6C2 1x6 Passive Video Splitter Module (2.05 GHz) LE-47690-8C2 1x8 Passive Video Splitter Module (2.05 GHz)

PRICE $35.77 $40.93

1x9 Bridged Telephone Module • Operates up to 9 separate telephones with 4 separate telco lines.

• Printed circuit board with 10 bridged 4-pair 110 type insulation displacement connectors. • Dimensions: 2.24"h x 6.57"w x 1.82"d.

• Sturdy, one-piece white steel construction. • Combine two or more enclosures for larger installations or future expansions. • Holds ¼, ½ and full-width expansion modules with the ability to mount most modules vertically or horizontally. • Large capacity provides multiple functionality for | “wired” homes. • Powder -coated white cover features a ¾" overlap to hide irregular drywall cuts. • Mounting hooks on the cover align screw-holes and reduce the chances of dropping during attachment. • Holds a broad range of current and future distribution modules, delivering audio, video, voice, data, security and more to any room of the home or office. • Can be surface mounted or recessed. Ideal for new installations or retrofits.

Modules

• Suitable for phone, fax or modem.

• Multiple knock-outs on top, bottom, sides and back facilitate cable entry and routing from every desired room.

PART NUMBER DESCRIPTION LE-47605-28W SMC-280 28" Enclosure & Cover Size: 28"H x 14.38"w x 3.60"d

Cable Distribution

PRICE $87.81

PART NUMBER DESCRIPTION LE-47689-00B 1x9 Bridged Telephone Module

PRICE $46.20

CAT5E Voice and Data Module • Use CAT5e patch cords to link to media distribution modules and data hubs. Use phone cords to link to telephone distribution modules.

• Use high-speed unshielded, twisted-pair cable to route data, phone, fax or modem signals. • Printed circuit board with six CAT5e ports. • Dimensions: 2.24"h x 6.57"w x 1.96"d. PART NUMBER DESCRIPTION LE-47605-C5B CAT5E Voice and Data Module

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $47.43

Stock Orders Shipped Same Day until 5 P.M. C.S.T

NETWORKING

HellermannTyton Jacks, Wall Plates, Panels CAT5E Flush Jacks

The MegaBand Category 5e flush modular jack was designed to meet the needs of end-users and installers. Several features have been incorporated to provide an easier and quicker installation. This system is guaranteed to have exceptional performance.

COLOR Ivory White Gray Black

PART # 60-16424 60-17424 60-18424 60-19424

COLOR Red Green Yellow Blue

PRICE PART # COLOR 60-08424 Orange 60-24424 Brown 60-25424 Office White 60-26424 Violet

Flush-Mount Faceplates

PART # 60-06139 60-10139 60-20436 60-06140 60-10140 60-20438 60-06141 60-10141

DESCRIPTION 1-Port Ivory 1-Port White 1-Port Office White 2-Port Ivory 2-Port White 2-Port Office White 3-Port Ivory 3-Port White

The GigaBand CAT6 flush modular jack was designed to “future proof” installations. Its patented design uses innovative crosstalk cancellation technology. The GigaBand system will easily support emerging applications such as Gigabit Ethernet and 622 Mbps ATM.

$4.60

PRICE PART # 60-06424 60-10424 60-11424 60-15424

CAT6 Flush Jacks

PART # 60-06324 60-10324 60-11324 60-15324

COLOR Ivory White Gray Black

PART # 60-16324 60-17324 60-18324 60-19324

PART # 60-20440 60-06142 60-10142 60-20442 60-06143 60-10143 60-20443 PRICE

DESCRIPTION 3-Port Office White 4-Port Ivory 4-Port White 4-Port Office White 6-Port Ivory 6-Port White 6-Port Office White $1.42

The CAT5e patch panels are pre-configured in 12, 24, 48 and 96 port versions to meet the needs of nearly all customer applications. Offered with increments of 6 port modules that can be replaced if damaged during installation, the patch panels can be used for both T568A and T568B wiring configurations. DESCRIPTION

PRICE

50-44048 12 Port

$114.25

50-44049 24 Port

$137.09

50-44050 48 Port

$252.26

50-44051 96 Port

$524.53

For Expert Customer Service, Call Our Sales Team Today!

PART # 60-08324 60-24324 60-25324 60-26324

COLOR Orange Brown Office White Violet

Snap-In Modular Multimedia Distribution Panels

Snap-in 19” modular multimedia distribution panels are made of black high-grade anodized aluminum. Unique locking feature is provided by an integrated plastic bezel within the aluminum panel that locks modules and couplers securely in PART# PANEL DESCRIPTION PRICE place, flush with the 50-23019 1-Row 12-Ports 1-RS $38.15 front of the panel. 50-23020 1-Row 16-Ports 1-RS $44.15 Panels have numbered 50-23021 2-Rows 12-Ports 2-RS $26.25 holes (ref. 0.57”w x 50-23022 2-Rows 16-Ports 2-RS $61.88 0.78”h) and all 50-23023 3-Rows 16-Ports 3-RS $64.16 panels have rolled 60-15146 Blank FIller Black $3.33 edges for rigidity.

CAT5e Patch Panels

PART #

COLOR Red Green Yellow Blue

$8.02

CAT6 Patch Panels

Pre-configured in 12, 24 and 48 PART # DESCRIPTION PRICE port versions to meet the needs 50-44038 12 Port $145.31 of nearly all applications. 50-44039 24 Port $213.10 The panels are offered with 50-44040 48 Port $423.79 increments of 6 port modules that can be replaced if damaged during installation. They can be used for both T568A and T568B wiring configurations.

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

NETWORKING

Fiber Optic Solutions

FIBER OPTIC PATCH CORDS Multi-Mode Fiber Optic Patch Cords ST/ST DUPLEX

Part # 27-500-001 (Custom Lengths Available)

Part # 27-270-001

PART # 27-200-001 27-200-002 27-200-003 27-200-005 27-200-010

SIZE 1M 2M 3M 5M 10 M

ST/SC DUPLEX PRICE $13.00 $13.91 $14.84 $16.54 $21.00

SC/SC DUPLEX PART # 27-300-001 27-300-002 27-300-003 27-300-005 27-300-010

SIZE 1M 2M 3M 5M 10 M

SIZE 1M 2M 3M 5M

PRICE $13.34 $14.78 $16.25 $19.16 $26.46

PART # 27-255-001 27-255-002 27-255-003 27-255-005

SIZE 1M 2M 3M 5M

FIBER ENCLOSURES & ADAPTER MODULES Wall Mount Fiber Enclosures

• Fully enclosed and lockable wall mount enclosures • Designed to support up to 4 modular adapter panels • Equipped with cable management and cable routing accessories to limit bend radius and add strain relief control. • The 12-port enclosure includes a rugged plastic latch to secure the door • The 24-port enclosure has a door lock for the provider side and a rugged plastic latch for the user door side. PART #. DESCRIPTION 50-24024 12/16 Wall Mount Enclosure 50-24025 24/32 Wall Mount Enclosure

PRICE $84.75 $120.33

ST/LC DUPLEX PRICE $13.26 $14.18 $14.82 $15.10 $21.14

PART # SIZE 27-270-001 1 M 27-270-002 2 M 27-270-003 3 M 27-270-005 5 M 27-270-010 10 M

PART # 27-510-001 27-510-002 27-510-003 27-510-005

SIZE 1M 2M 3M 5M

PART # 27 260 001 27 260 002 27 260 003 27 260 005 27 260 010

PRICE $15.89 $17.33 $18.80 $21.71 $24.94

PART # 27-250-001 27-250-002 27-250-003 27-250-005 27-250-010

PART # 27-265-001 27-265-002 27-265-003 27-265-005

SIZE 1M 2M 3M 5M

PRICE $16.94 $17.85 $18.80 $20.48 $27.56

SIZE 1M 2M 3M 5M 10 M

PRICE $18.38 $19.85 $21.29 $24.20 $31.50

SC/SC DUPLEX PRICE $15.12 $16.20 $17.30 $18.90

PART # 27-310-001 27-310-002 27-310-003 27-310-005

LC/ST DUPLEX PRICE $20.40 $20.95 $22.05 $24.20

SIZE 1M 2M 3M 5M 10 M

LC/LC DUPLEX

ST/SC DUPLEX PRICE $16.07 $16.80 $17.57 $19.04

LC/LC DUPLEX (Custom Lengths Available)

SIZE 1M 2M 3M 5M 10 M

SC/LC DUPLEX

Single Mode Fiber Optic Patch Cords ST/ST DUPLEX PART # 27-210-001 27-210-002 27-210-003 27-210-005

PART # 27-500-001 27-500-002 27-500-003 27-500-005 27-500-010

PRICE $21.14 $21.79 $22.58 $24.02

SIZE 1M 2M 3M 5M

PRICE $16.46 $17.20 $17.85 $19.30

HDMI Over Fiber

See Page 26

Rackmountable Fiber Enclosures

• Sliding tray for easy access to the fiber • Integrated cable management • Enclosures come unloaded, customize with fiber adapter modules at right.

PART # 50-24044 50-24045 50-24046 50-24047

DESCRIPTION 18/24 Fiber Enclosure 1U Unloaded 36/48 Fiber Enclosure 2U Unloaded 54/72 Fiber Enclosure 3U Unloaded 72/96/144 Fiber Enclosure 4U Unloaded

Plug-In Fiber Adapter Modules

PRICE $217.19 $240.89 $299.16 $366.31

PART # DESCRIPTION 50-24017 6 ST MM/SM 50-24018 6 Simplex SC MM/SM 50-24019 3 Duplex SC MM/SM 50-24020 6 Duplex SC MM/SM 50-24021 6 Duplex LC MM/SM 50-24022 8 Simplex SC MM/SM 50-24023 8 Simplex ST MM/SM

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $34.30 $44.60 $51.57 $85.59 $66.54 $60.30 $47.80

Stock Orders Shipped Same Day until 5 P.M. C.S.T

NETWORKING

Network Switches/Media Converters 10/100 Desktop Ethernet Switches

With advantages such as, easy to Install and use, compact-sized design, and simple troubleshooting, these Fast Ethernet switches provides cost-conscious business and home users with the foundation of an integrated system of small-office / home-office networking. Provides array LED indicators, the network status can be monitored at a glance. PART # PORTS 90-30320 5 90-30321 8 90-30322 16

• Metal Housing • Complies with IEEE 802.3 10BaseT and IEEE 802.3u 100Base-TX standards • Automatic speed and duplex mode sensing • Auto MDI/MDI-X on each port • Up to 3.2G non-blocking switch fabric • Up to 1K MAC address table • High performance Store-and-Forward Architecture

PRICE $37.21 $38.55 $71.31

10/100 Rackmount Ethernet Switches

PART # PORTS 90-30323 16 90-30324 24 90-30458 48

PRICE $74.17 $94.12 $354.18

• Complies with IEEE802.3 10Base-T, IEEE802.3u 100Base-TX standards • High performance Store-and-Forward Architecture • Runt and CRC filtering • Flow control (Back Pressure) support in half-duplex mode • 1K MAC Address Table, automatically learning and aging • Auto-MDI/MDIX on each port

Fast Ethernet MM Converters

10/100/1000 Gigabit Ethernet Switches

Desktop

• Comply with IEEE802.3, IEEE802.3u 10/100Base-TX, 100Base-FX Standard • Connectors: One RJ-45 (Auto-MDI/MDI-X for FT-80x series) Twisted Pair, EIA568 • Support distances up to 2 km • One Fiber-optic, 1310nm wavelength, connector-type • Duplex mode support: Full or half-duplex mode by PART # DESCRIPTION PRICE Auto-Negotiation 90-30113 RJ45 to ST $93.85 • Can be installed in a media 90-30114 RJ45 to SC $78.45 converter chassis

Rackmount

Providing 16 Gbps non-blocking switch fabric as well as 8K MAC Address table, these switches support 802.3x full duplex flow control and also offer wire-speed packet transfer performance without risk of packet loss. All RJ-45 copper interfaces support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ-45 Category 3, 4, 5 or above cables. MDI/MDI-X auto detection is provided for direct wire connection to any Ethernet device without requiring crossover cables. PART # 90-30144 90-30474 90-30148 90-30145 90-30146

PORTS 5 8 16 24 48

TYPE Desktop Desktop Rackmount Rackmount Rackmount

For Expert Customer Service, Call Our Sales Team Today!

PRICE $48.49 $100.08 $197.68 $274.85 $825.00

Gigabit Ethernet Converters

• Complies with IEEE802.3z, 1000Base-SX / 1000Base-LX, IEEE802.3ab 1000Base-T • 1000Base-SX interface for up to 500 meters (SC,MM) • Compact in size, easy installation • 1000Base-LX interface for up to 10km (SC,SM) • Full-duplex supports for TP and fiber port PART # PORTS 90-30124 1000Base-T to 1000Base-SX (SC, MM) 90-30125 1000Base-T to 1000Base-LX (SC, SM)

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $114.10 $181.21

NETWORKING

USB Solutions

USB Cables A

Part# 35-101-72 • Part# 35-101-120 • Part# 35-101-180

Part# 35-100-72 • Part# 35-100-120 • Part# 35-100-180

KEY PART# A 35-101-12 A 35-101-36 A 35-101-72 A 35-101-120 A 35-101-180 B 35-100-72 B 35-100-120 B 35-100-180 C 35-108-192 D 90-30641 E USB2-6MF E USB2-10MF E USB2-15MF

D Part# 90-30641

E Part# USB-6MF • Part# USB-10MF • Part# USB-12MF

Part# 35-108-192

DESCRIPTION USB 2.0 A-Male to B-Male Cable, 1 ft. USB 2.0 A-Male to B-Male Cable, 3 ft. USB 2.0 A-Male to B-Male Cable, 6 ft. USB 2.0 A-Male to B-Male Cable, 10 ft. USB 2.0 A-Male to B-Male Cable, 15 ft. USB 2.0 A-Male to A-Male Cable, 6 ft. USB 2.0 A-Male to A-Male Cable, 10 ft. USB 2.0 A-Male to A-Male Cable, 15 ft. A-A Ext. 2.0 Active Cable, 16' USB/Serial Adapter A-DB9M

PRICE $1.35 $1.50 $2.10 $3.75 $4.95 $2.40 $3.30 $5.10 $27.00 $36.00 $1.95 $3.75 $4.35

USB 2.0 Extension non Active A/A MF 6 ft. White USB 2.0 Extension non Active A/A MF 10 ft. White USB 2.0 Extension non Active A/A MF 15 ft. White

USB 1.1 Over CAT5E/CAT6 Solutions

Extend your USB peripherals (i.e. computer keyboard, mouse or hard drive) up to 150 ft. away from the location of your computer using one CAT5/5E/6 cable. The USB signal is sent between the Local and Remote units by buffering the signal through send and receive line drivers, preserving data integrity. Active repeaters provide maximum flexibility for USB devices and are ideal for security and surveillance video, PC digital audio systems and other peripherals with USB interface that are beyond the reach of regular cables

USB 1.1 Over CAT5E/CAT6 Extender/4-Port Hub

PART # 90-12201

DESCRIPTION USB UTP Hub Kit

PRICE $78.17

Features: • Wall Plate set includes both Local and Remote Plate • Extends USB signal using regular CAT5/5e/6 cable up to 150 ft. • Fully compliant with USB 1.1 specification • Supports any full-speed or low-speed USB devices • 100% compatible with USB hubs and other devices • No software driver, no power needed

USB 1.1 Over CAT5E/CAT6 Extender

PART # 90-12200

DESCRIPTION USB UTP Extender Kit

USB 1.1 Over CAT5E/CAT6 Wall Plate Set PRICE $51.54

PART # 90-12202

DESCRIPTION USB Over CAT5E/6 Wall Plate

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $51.54

Stock Orders Shipped Same Day until 5 P.M. C.S.T

NETWORKING

USB Solutions A

USB 2.0 Over CAT5E/CAT6 Solutions

Transmitter

USB 2.0 Over CAT5E/CAT6 Active Extender Sets FEATURES:

• Extends the transmission distance up to 100 meter/ 330 ft using one CAT5E/CAT6 solid-gauge cable • Fully compliant with USB 2.0 specification • Supports most full-speed or low-speed USB devices • Recommended 1 ft. USB cable for transmitter side is included • AC/DC 5V 2A power adapter included • Designed in Gigabit Ethernet Protocol, supports speed up to 480 Mbps USB 2.0 Specifications • Ideal for USB peripheral extension, industrial control, security, digital signage • Works with Windows XP, Vista, Windows 7, Windows Server 2003 & 2008 • Not compatible with USB hubs, some touch screen monitors, and video streaming devices such as webcams • Software driver included

KEY PART # A 90-12203 B 90-12204

DESCRIPTION USB 2.0 Over CAT5E/CAT6 Extender Set USB 2.0 Over CAT5E/CAT6 Extender Balun 4-Port Hub (Active)

USB 2.0 Over CAT5E/CAT6 Advanced Extender Sets

Suggested USB 2.0 extender for video streaming applications such as Webcams, and for advanced Touch Screen Monitor applications. Represents the leading edge of USB 2.0 Extension solutions, providing world class 4 port USB 2.0 connectivity over CAT 5 at data rates up to 480Mbps.

PRICE $163.80 $234.15

FEATURES:

• Long reach USB 2.0 powered by ExtremeUSB® technology • Extends USB 2.0 high-speed and USB 1.1 (low-speed, full speed) devices up to 100m over Cat 5 cable • Operates with USB 2.0 high-speed host controllers and USB 1.1 classic hosts • Supports all USB device types: Control, Interrupt, Bulk and Isochronous at up to 480Mbps • True plug and play, ready to operate right out of the box. No new driver installation required • Supports all major operating systems including Windows®, Mac OS®, and Linux® • Integrated hub provides four remote USB 2.0 ports. Number of devices can be increased using additional USB hubs • AC power adapter at remote unit provides standard 500mA to each USB port • Power adapter at local unit is not required for normal operation • Ideal for a wide variety of USB devices, from printers, scanners, hard drives, and audio devices, to touch screens, web cams, and game controllers

PART # 90-12205 90-12206

For Expert Customer Service, Call Our Sales Team Today!

Receiver

DESCRIPTION USB 2.0 Over CAT5E/CAT6 Advanced Extender Balun 4-Port Hub (Active) USB 2.0 Over CAT5E/CAT6 Extender

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $346.48 $339.13

AV DISTRIBUTION

HDMI Cables and Adapters

COMPLETE LINE OF AV DISTRIBUTION SOLUTIONS

While being able to enjoy true HDTV in one location is nice, being able to split, switch and extend that signal to multiple locations is becoming a very popular and a convenient option to have. In addition, being able to provide quality solutions with the right connections, distance ability and performance is a must. Whether you’re distributing HDMI signals throughout a home or VGA signals throughout a school or business, MilesTek has a full range of digital and analog devices to make your installation successful. We offer devices for more budget conscious projects on up to higher-end products from a few leading AV partners.

LENGTH 1 FT 3 FT 6 FT 10 FT 15 FT 20 FT 25 FT 35 FT 50 FT 66 FT 75 FT 100 FT

AWG 28 28 28 28 28 28 24 24 24 24 RedMere™ RedMere™

Several devices utilizing CAT5E/CAT6 cabling to achieve greater distance, while keeping costs to a minimum, are also available. Our complete line of AV products includes: • Cable Assemblies • Switchers • Distribution Amplifiers • Active and Passive Baluns • Over CAT5 Extenders • Wall Plates

HIGH SPEED CABLE FEATURES: • HDMI Ethernet Channel, which allows for a 100 Mb/s Ethernet Connection between the two HDMI connected devices • Supports Audio Return Channel Functionality • Allows 3D over HDMI when connected to 3D devices • Supports 4K x 2K and 1080p Video Resolutions • Additional Color Spaces (sYCC601, RGB & YCC601) • Gold Plated HDMI (Type A to Type A) Connectors • Data Speed Transfer: 10.2 Gbps • UL Listed

HDMI® High Speed with Ethernet Cables

TPART # 32-270-12 32-270-36 32-270-72 32-270-120 32-270-180 32-270-240 32-270-300 32-270-420 32-270-600 32-270-792 32-270-900 32-270-1200

This easy-to-follow section offers signal distribution options for HDMI, DVI, Component Video, RGB, VGA, Audio and USB.

PRICE $5.70 $7.95 $10.65 $14.64 $18.90 $21.90 $37.80 $49.00 $77.00 $125.75 $133.80 $174.72

HDMI® High Speed 180 Degree Swivel Cables (No Ethernet)

DVI to HDMI Adapter Cables PART # 32-231-1M 32-231-2M 32-231-3M 32-231-5M 32-231-144 32-231-300

LENGTH 1M 2M 3M 5M 12 FT 25 FT

PRICE $9.60 $17.25 $20.25 $31.50 $19.05 $52.17

PART # LENGTH 32-231-420 35 FT 32-231-600 50 FT

PRICE $70.11 $95.79

PART # 32-260-36 32-260-72 32-260-144 32-260-300

LENGTH 3 FT 6 FT 12 FT 25 FT

AWG 28 28 28 28

PRICE $19.14 $22.45 $32.00 $48.54

HDMI Wall Plates HDMI Adapters

KEY A B C

PART # 10-24523 10-24526 10-24527

DESCRIPTION HDMI F/F HDMI F to DVI M HDMI M to DVI F

PRICE $15.44 $21.21 $24.23

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

See Page 47

Stock Orders Shipped Same Day until 5 P.M. C.S.T

AV DISTRIBUTION

HDMI Splitters and Switchers HDMI Splitters

1x2, 1x4 and 1x8 HDMI splitters distribute signal from 1 HDMI source to multiple HDMI displays simultaneously. They offers solutions for HDTV retail and show sites, STB, DVD and Projector factory, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments. FEATURES:

• Max. cable extension: 10 meters by 28AWG HDMI Cable; 15 meters by 26AWG HDMI Cable; 20 meters by 24 AWG Cable • Input Video Signal: 0.5 -1.0 volts p-p • Input DDC Signal: 5 volts p-p (TTL) • Max Single Link Range: 1920X1200, 1080P • Output Video: HDMI 1.3 + HDCP1.0/1.1/1.2 • DVI: 480p/576i/576p/720i/720p/1080i/1080p • Resolutions DTV/HDTV: 480i/576i/480p/576p/ 720p/1080i/1080P/3D(1080p@24Hz) • HDMI Version: HDMI 1.3 • Operating Frequency: Up to 225MHz • EIDI Duration: 4 seconds • Power supply: DC 5V

KEY A B C

PART # 90-12003 90-12004 90-12018

DESCRIPTION HDMI 1 to 2 Splitter HDMI 1 to 4 Splitter HDMI 1 to 8 Splitter

ENCLOSURE Metal Metal Metal

PRICE $22.18 $105.00 $207.00

HDMI Switchers

The HDMI Switchers allow access up to five HDMI sources, using one HDTV display. HDMI Switchers are perfect for home theaters, audio/video installations, data centers, information distributions, conference room presentations, schools and corporate training environments.

FEATURES: • Switch easily between any 3 or 5 HDMI v1.3 sources • Maintain 480p, 720p, 1080i and 1080p resolutions • Switch inputs with the IR remote control or MANUAL push button • HDCP and HDMI 1.3 version compliant • Auto searches current signal input when product is turned on or by controller • Easy installation • Auto power and switching • Compact enclosure, AC/DC power adapter included KEY PART # D 90-12001 E 90-12000

DESCRIPTION ENCLOSURE HDMI 3 to 1 Switcher Metal (w/ remote) HDMI 5 to 1 Switcher Metal (w/ remote)

For Expert Customer Service, Call Our Sales Team Today!

PRICE $93.16 $113.85

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

AV DISTRIBUTION

HDMI Matrix Switchers

4x2 HDMI Matrix Switcher

This 4x2 HDMI matrix switcher is with 4 HDMI inputs and 2 HDMI outputs. It is a true matrix and can distribute any one of 4 sources to either of 2 displays, and can work as a splitter to show the same source on 2 displays simultaneously. It is HDMI 1.3 and supports full HD 1080p.

FEATURES:

• Distributes any one of 4 sources to either of 2 displays or to both displays simultaneously • Compatible with full HD 480i, 480p, 576i, 576p, 720p, 1080i and 1080p, and 3D(1080p/24Hz) • Switch easily between multiple HDMI sources via remote control or via buttons on the unit • With inner IR receiver to enlarge IR remote control signal • HDMI 1.3 V and compliant with HDCP • Power: 5wtts (Max) • Power Supply: DC 5V

PART #

DESCRIPTION

PRICE

90-12020 4x2 HDMI Matrix Switcher

$98.07

4x4 HDMI Matrix Switcher

4x4 HDMI Matrix Switcher is a full routing type 4-by-4 HDMI Matrix Switch, and any one of input sources is able to be displayed simultaneously on 4 displays. It offers HD video solution for super market; shopping Mall; HDTV, STB, DVD and projector factory; data control center; information distribution; conference room presentation; education and training, corporation show room, luxurious house, etc. FEATURES:

• It is real HDMI 1.3 version and HDCP compliant • Compatible with full HD 480i, 480p, 576i, 576p, 720p, 1080i and 1080p, and 3D(1080p/24Hz) • Multiple witching modes: IR remote control, operate manually or operate via RS232 port • With IR extender: enlarge remote control signal • Rack-mountable: with mounting kit and screws • Input video signal: 0.5-1.0 volts p-p • Input DDC signal: 5 volts p-p (TTL) • Audio: LPCM,Dolby-AC3, DTS7.1, DSD/Dolby TrueHD/DTS-HD master Audio

• HDMI video color format: deep color • Maximum transmission distance: 10 meters by 28AWG cable; 15 meters by 26AWG cable(for further distance, HDMI extender is optional) • Power consumption: MAX. 36W • Power supply: 12V DC, 3A PART # 90-12021

DESCRIPTION 4x4 HDMI Matrix Switcher with HDMI 1.3

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $382.22

Stock Orders Shipped Same Day until 5 P.M. C.S.T

AV DISTRIBUTION

HDMI Over CAT5E/CAT6 HDMI OVER CAT5E/CAT6 SOLUTIONS HDMI Over Dual CAT5E/CAT6 Passive Extender Balun and Wall Plate Sets FEATURES: • Extends HDMI 1.3 signal up to 100 ft. @ 1080p with CAT6 • Supports HDMI 1.3 • Balun and Wall Plate Sets Include Transmitter & Receiver • Video and audio signals are transmitted digitally over CAT5E/CAT6 cable with zero signal loss • Video Bandwidth: 165 MHz • Connectors: Standard HDMI 19 pin, RJ45 (CAT5E/CAT6) • HDCP/DDC/CEC Compatibility • No power supply required - requires source that provides 5V DC HDMI signal • RoHS compliant • Wall Plate: Not a decora-style wall plate, Each plate is one piece • Balun: HDMI pigtail cables are 10” long • Solid gauge CAT5E cable may be used, but for optimal performance and distance CAT6 is suggested for these passive devices. KEY PART #

DESCRIPTION

PRICE

A 90-12034 HDMI Over Dual CAT5E/CAT6 Passive Balun Extender with HDMI Pigtail Set 90-12035 B HDMI Over Dual CAT5E/CAT6 Passive Wall Plate Extender Set

$62.42 $27.20

HDMI Over Dual CAT5E/CAT6 Active Extender Balun Set

FEATURES: •Transmission Range: o Extends 1080p resolutions up to 115 ft. (35M) over Cat5e Cables o Extends 1080p resolutions up to 164 ft. (50M) over Cat6 Cables • HDMI 1.3 and HDCP compliant • Includes transmitter & receiver and power adaptor • Video Bandwidth: 165 MHz • Up to 24bit color depth • Connectors: Standard HDMI 19 pin, RJ45 (CAT5E/CAT6) • HDCP/DDC/CEC Compatibility • Power Supply: 5V DC, Receiver Side Only PART # DESCRIPTION • Required Cables: Solid CAT5E/6 Cables 90-12006 HDMI Over Dual CAT5E/CAT6 Extender • RoHS compliant

AV CAT5E/CAT6 EXTENDERS: Standard pre-made patch cords (strandedgauge) shouldnÊt be used for these products. Use solid-gauge CAT5E/CAT6 bulk cable throughout installation run, correctly terminated with RJ45 connectors. Avoid breaking cabling up by going thru CAT5E/CAT6 wall plate jacks and panels. AV over CAT5E/CAT6 extenders in general are designed and tested to work directly

For Expert Customer Service, Call Our Sales Team Today!

PRICE

$59.82

from the original Source device (laptop, BlueRay DVD, cable/satellite box, etc.) to the Display/HDTV. Although success has been experienced, signal performance, compatibility, and endurance over time can't be guaranteed when combined with AV receivers/signal processors, converters, switches or splitters/amplifiers between the original Source and Display.

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

AV DISTRIBUTION

HDMI Over CAT5E/CAT6

HDMI Over Dual CAT5E/CAT6 IR Active Extender Balun and Wall Plate 3D-Ready Sets FEATURES:

• Transmission Range:

— Extends 1080p resolutions up to 164 ft. (50M) over Cat5 Cables

— Extends 1080p resolutions up to 180 ft. (55M) over Cat6 Cables

• High Speed Chip Set that Supports 3D, 4K x 2K • Full HD1080P/60HZ, HDCP Compliant • Video Bandwidth: 225 MHz

• Includes IR Adapter Cables for both Transmitter and Receiver

• Supports Digital Audio Format, DTS-HD/DolbyTrue HD/LPCM7.1/AC3/DTS/DSD

IR Adapter Cables

• Unique Circuit Design Allows for Protection against High Voltage and Peak Currents

• Tested with Whole Series 7.1 Home Theater Systems

PART #

DESCRIPTION

90-12040

HDMI IR 3D Active Extender, 50M (164 ft.)

PRICE $141.14

• Full IR bandwidth compatibility, IR frequency range: 20KHz to 60KHz BALUN VERSIONS:

• Rack or Wall Mountable

• 9V DC, UL Listed Power Supply for Receiver Side

• Dimensions: 1.25”W x .875”H x 3.25”D WALL PLATE VERSIONS:

• 50M Version: 5V DC, UL Listed Power Supply for Receiver Side

• Dimensions: 2.75”W x 4.5”H x 1.25”D IR Adapter Cables

PART #

DESCRIPTION

PRICE

90-12042 HDMI IR 3D Active Extender Wall Plate, 50M (164 ft.)

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

$158.00

Stock Orders Shipped Same Day until 5 P.M. C.S.T

AV DISTRIBUTION

HDMI Over Single CAT5E/CAT6 HDMI Over Single CAT5E/CAT6 Active Extender Balun Set FEATURES:

•Transmission Range: o Extends 1080p resolutions up to 164 ft. (50M) over Cat5e Cables o Extends 1080p resolutions up to 196 ft. (60M) over Cat6 Cables • HDMI 1.3 and HDCP compliant • Includes transmitter & receiver and power adaptors • Video Bandwidth: 165 MHz • Up to 24bit color depth • Connectors: Standard HDMI 19 pin, RJ45 (CAT5E/CAT6) • HDCP/DDC/CEC Compatibility PART # • Power Supply: 5V DC, For Transmitter and Receiver Sides 90-12017 • Solid Gauge Cat6 Cable Preferred for This Product

DESCRIPTION HDMI Over Single CAT6 Extender

HDMI Over HDBaseT Lite Single CAT5E/CAT6 Extenders • Features HDBaseT Lite Technology that transmits uncompressed full HD digital video, audio, and control signals through a single 70m/229ft CAT5E/CAT6 cable with RJ45 connectors • Transmission Range: Extends 1080p resolutions up 229 ft over a single CAT5E/CAT6 cable • Super IR control system, IR transport channel can be forward or backward • Supports Standard IR in 38 kHz mode, includes 1 IR TX and 1 IR RX

PRICE $126.00

FEATURES:

• HDBaseT Technology that supports 3D and 4K x 2K • Video Bandwidth: Uncompressed video/audio up to 10.2 Gbps • FullHD1080P • HDCP compliant • Supports Digital Audio Format, DTS-HD/Dolby-True HD/LPCM7.1/AC3/DTS/DSD • Tested for Compatibility with all leading HD Video brands • Tested with 7.1 Home Theater Systems • (2) 5V DC Power Supplies

KEY PART #

DESCRIPTION

PRICE

A 90-12055 HDMI HDBaseT Lite Extender B 90-12056 HDMI HDBaseT Lite Wall Plate Extender

For Expert Customer Service, Call Our Sales Team Today!

$193.86 $270.95

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

AV DISTRIBUTION

HDMI Over Single CAT5E/CAT6

HDMI Over HDBaseT Single CAT6 IR/Serial/Ethernet Extender Now combine all your HDTV and networking requirement into one cutting edge device! This CAT6 active extender transmit HDMI with HDCP up to 330ft @ 1080p 60Hz. Built-in pass-thru IR control allows you to manage source device and RS232 for the display. This unique extender allows long distance distribution of IR, RS232 serial, audio & video using inexpensive CAT6 cables.

FEATURES:

• HDBaseT (Power over Ethernet) Technology • Supports all HDMI 1.4a 3D formats • Manage both source device and display remotely • Built-in 3 fast Ethernet LAN ports on each module • 340 MHz bandwidth and extends up to 330ft • Provides local HDMI bypass port on TX module • Deep Color Video with EDID pass-thru capability • DTS-HD & Dolby TrueHD multi-channel digital audio • Extends full bandwidth IR and full-duplex RS-232 • Includes Transmitter, Receiver and Infra-Red blaster module • Note: This is not an HDMI over LAN device

PART #

DESCRIPTION

90-12046 HDMI Over Single CAT6 All-In-One AV/Networking Extender Set

PRICE $273.34

What is HDBaseT?

HDBaseT is a connectivity standard for whole-home and commercial distribution of uncompressed HD multimedia content. The cornerstone of HDBaseT technology is 5Play™, a feature set that converges uncompressed full HD digital video, audio, 100BaseT Ethernet, power over cable and various control signals through a single LAN cable.

The HDBaseT 5Play™ feature set enables delivering the following over a single 100m/328ft CAT5e/6 cable.

HDBaseT Architecture

HDBaseT uses an asymmetric method, sending video, audio, Ethernet and controls from source to sink, but only 100Mb are transferred back (Ethernet and controls). Unlike conventional data communication which is a symmetrical application by nature, with required a bit error rate (BER) of at least 10 to the minus 12, the asymmetric nature of HDBaseT is based on an innovative DSP engine and an AFE (Application Front End) architecture.

A special line coding scheme was developed to provide a better transfer quality to some kinds of data (audio, controls, Ethernet) without the need to 'pay' the protecting overhead for the video content which consumes most of the bandwidth.

HDBaseT uses a proprietary version of Pulse Amplitude Modulation (PAM) technology, where digital data is represented as a coding scheme using different levels of DC voltage at high rates. This enables the 5Play feature-set to be maintained over a single 100 m CAT cable, without the electrical characteristics of the wire affecting performance. Although HDBaseT uses the same coding technology as Ethernet and even has an Ethernet channel, its packet-based technology is different from the traditional Ethernet packets. HDBaseT simply relies on the same physical cabling which provides the inherent benefits of the cost-effective CAT infrastructure.

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T

AV DISTRIBUTION

HDMI Over LAN/Ethernet HDMI Over LAN/Ethernet IR Active Extender Kit

Allows you to simultaneously send out an HDMI 1.3 Signal to one or more HDMI displays using one CAT5E/CAT6 cable over a standard managed Ethernet infrastructure as well as returns an IR control signal to the source to control it. Perfect for multiple display commercial applications such as digital signage and others, bars/restaurants, corporate. This set includes a transmitter, receiver, and AC adapters. The units also come with one set of IR send and receive control cables shown above to allow control of source device at any remote display location.

You can distribute HD digital content 330ft/100m from one source to one HD display, or to many displays through unmanaged or managed Ethernet switches (330ft/100m max between transmitter/receiver to switches or between switches to switches). Daisy-chain up to 3 levels of Ethernet switches to reach a maximum distance of 1,300ft/400m while sustaining picture and sound quality.

TECH NOTE: This system is not an HDMI Balun, but an HDMI over IP system. This means you can create your own AV Ethernet network and all of the receivers will find the transmitter automatically. It can even be used over smaller existing house networks and low cost LAN switches and routers. FEATURES: • Connect Hundreds of Displays to a Single Source • Expand by adding Ethernet Hub and more Receivers • Supports HDMI v1.3 1080p with stereo audio • 225MHz Bandwidth, Plug & Play for easy installation • IR Allows control of source from remote locations • Includes Transmitter, Receiver, and IR transmitter/receiver • Includes AC adapters • HDCP, HDMI v1.3, & RoHS Compliant

For Expert Customer Service, Call Our Sales Team Today!

KEY PART #

A B

DESCRIPTION

90-12028 HDMI Over LAN/Ethernet IR Extender Kit 90-12029 HDMI Over LAN/Ethernet IR Receiver

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE

$365.07 $189.00

AV DISTRIBUTION

HDMI Over CAT5E/CAT6

HDMI 1x4 Splitter over Dual CAT5E/CAT6 Extender System

• Allows 1 HDMI Source to be Connected to 4 HDMI Displays Devices over Dual Cat5e/Cat6 Cables • Transmission Range: — Extends 1080p resolutions up to 100 ft over Cat5e Cables — Extends 1080p resolutions up to 110 ft over Cat6 Cables • High Speed Chip Set that Supports 3D and 4K x 2K • Full HD1080P/60HZ, HDCP Compliant • Super IR & RS232 control system, IR transport channel can be forward or backward • Supports Digital Audio Format, DTS-HD/Dolby-True HD/LPCM7.1/AC3/DTS/DSD • Unique Circuit Design Allows for Protection against High Voltage and Peak Currents • Tested for Compatibility with all leading HD Video brands • Tested with Whole Series 7.1 Home Theater Systems • Rack or Wall Mountable • 9V DC, UL Listed Power Supply for Transmitter Units • 1 x 4 Splitter Dimensions: 12.5”W x 1.125”H x 6.25”D • Receiver Dimensions: 1.75”W x .875”H x 3.25”D PART # 90-12044 HDIR-T HDIR-R

DESCRIPTION HDMI over Dual CAT5 1x4 Splitter and Receivers Transmitter IR Adapter Cable (Optional)* Receiver IR Adapter Cable (Optional)*

PRICE $655.25 $7.95 $7.95

Optional IR Adapter Cables

4 Receivers Included

*CanÊt use general IR cables with these systems; Only HDIR-T / HDIR-R cables will work

HDMI 4x4 Matrix Switch over Single CAT5E/CAT6 Extender System This system enables up to 4 HDMI video/audio devices to be independently switched to 4 HDMI displays or projectors for uncompressed digital distribution up to 40m (130ft) over a single Cat5e/Cat6 cable. Each output is able to show any connected source simultaneously regardless of whether the input carries HDCP FEATURES: • Reads and copies EDID from connected devices with additional EDID configuration through customizable DIP switch settings • Supports all high definition resolutions up to 1080p • HDMI v.1.3, Supports 24Bit Color depth • For even greater control and fine tuning, each receiver features a fully adjustable EQ distance range for optimizing the transmission signal • Protection against ESD (electrostatic discharge) included within the receiver units to further stabilize transmission • Choose from 6 switching modes – infrared remote control, front panel buttons, local IR, IR call-back, LAN and RS232 • Simple switching remote control included, which can also be learned into a universal remote handset to allow the control of multiple devices from one handset • Pack comes complete with 1 x 4x4 Matrix with 19” brackets, 4 x 40m IR receivers with mounting brackets, IR receivers, emitters and a Matrix remote control

encryption. Designed work seamlessly together for complete compatibility and full management of handshakes, screen resolutions and HD signal distribution to each display point, whether in a residential or commercial environment.

• 12V DC, UL Listed Power supply for 4x4 matrix • 5V DC, UL Listed Power Supplies for Receivers (4 total) • 4x4 Matrix Dimensions: 17.25” W x 2.05” H x 9.25” D • Receivers Dimensions: 2.4” W x .09” H x 4.5” D

PART # DESCRIPTION 90-12058 HDMI 4x4 Matrix Switch over Single CAT5E/CAT6 Extender System

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $1,033.86

Stock Orders Shipped Same Day until 5 P.M. C.S.T

AV DISTRIBUTION

HDMI Over Coax HDMI OVER COAX SOLUTIONS HDMI over Single RG6/SDI Coax Extender Set FEATURES:

• Extends high definition HDMI compliant devices up to 400 ft. (120 m) with RG6 dual or quad shield CATV broadband coax. • Supports SDI signal distance up to 300M (approx. 1,000 ft.) for SD signal, 200M (660 ft.) for HD signal and 100M (330 ft.) for 3G signal • Supports resolutions 480i/p, 576i/p, 720p and 1080i/p @ 24-60Hz • Due to signal compression technology of this system, supports screen ratio 16:9 only – not 4:3 • Supports HDMI 1.3c and HDCP 1.1/1.2 compliant devices • Operation at 2.970Gb/s, 2.970/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s and 270Mb/s • Equalized and re-clocked loop output • Auto video mode detection (3G/SD/HD) • Conversion from SMPTE 425M level B to Level A for 1080p 50/59.94/60 4:2:2 10-bit • Simultaneous display with SDI and HDMI signalv • Frequency Bandwidth 225MHz/link (HDMI 1.3) • Supplied with a Locking PSU • Consumer Electronics Control (CEC) • Set includes cascadeable transmitter and receiver, (2) 5V power adapters, plus remote control • Unique system allows signals from 2 input sources to transmit to 1 remote display. • Cascade port is available on both transmitter and receiver, allowing signal expansion to multiple remote receivers.

PART # 90-12024 90-12025

DESCRIPTION HDMI over Single RG6 Coax Receiver-Only for Cascading

PRICE $357.00 $186.80

HDMI Over Single Coax Bi-Directional IR Extender Set FEATURES:

• Transmission Range: Extends 1080p Resolution Up to 328 ft (100 m) over RG-6 Coaxial Cable (Dual and Quad-Shielded);Extends 1080p Resolution Up to 164 ft (50 m) over RG-59 Coaxial Cable • Works with HDMI and HDCP Compliant Devices • Supports High Definition Resolution 1080p • Auto-adjustment of feedback, equalization and amplification • DIP switch for EDID setting • LED indicators for power and signal status • Transfers bi-directional IR control signals, IR RX and TX included • Equipped with ESD (Electro-Static Discharge) protection • Mounting ears are supplied • Power Supply: (2) 5V DC • Dimensions: 5” W x 1” H x 5” D

PART # DESCRIPTION 90-12026 HDMI Over Single Coax Bi-Directional IR Extender Set

For Expert Customer Service, Call Our Sales Team Today!

PRICE $314.93

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

AV DISTRIBUTION

HDMI Over Fiber

HDMI OVER FIBER EXTENDERS HDMI over Fiber Optic Extenders with IR Pass-Thru Allows long distance HDMI distribution up to 1,600 meters @ 1080i and 800 meters @ full HD 1080p utilizing inexpensive and commonly used multimode fiber optic cabling. Provides pure HDMI transmission with zero signal compression or degradation even at long distances, and is completely free of Electromagnetic Interference (EMI) which can be common with CAT5E/CAT6 copper cabling in certain critical environments. Unique, exclusive design of 3D-ready version provides loop-up HDMI port on transmitter for local monitor, and 2 HDMI outputs on receiver to connect 2 HD displays! So this device is both a signal extender and splitter in one.

Why HDMI over Fiber instead of HDMI over CAT5E/CAT6? In addition to the obvious distance advantages, there are some applications where Electromagnetic Interference (EMI) is common such hospitals, government building, broadcast facilities, industrial factories, high-security areas and others. Although AV distribution over CAT5E/CAT6 is widely popular, when used in these types of environments, electrical noise causing signal in-and-outs and cross talk with other cables can occur.

However fiber optic cabling is totally immune to such EMI issues, making the idea of combining it into increasingly popular HD video distribution applications very appealing. Signal flow through fiber will not interfere with other equipment or cables. Fiber is also safer for security purposes since it can’t be interrupted or spliced like CAT5E/CAT6.

FEATURES:

• Completely free of Electromagnetic Interference (EMI) • Supports video resolution up to full HD 1080p/60Hz, 2K and 1920 x 1200 • Extend HDMI signal up to 1,600 meters @ 1080i / 800 meters @ 1080p • Pure digital transmission at great distances with zero signal compression • Compatible with 7.1 channel audio • IR pass-thru extending function, IR cables included

SPECIFICATIONS:

• Total Fiber Bandwidth: 7.5Gbps • Video Amplifier Bandwidth: 165MHz (4.95Gbps) • Video Support: 480i, 480p, 720p, 1080i, 1080p/60Hz, Full HD (1920 x 1080), WUXGA (1920 x 1200) • Deep color supported: up to 24 bit color space • Extension Distance: 800 meters (1080p) / 1,600 meters (1080i) • IR frequency bandwidth: 20-60KHz • HDMI, Fiber, IR Connection: HDMI Type A / SC Multimode / 3.5mm • Fully compliant with HDMI 1.3 and 1.4 high-speed specifications • 3D-Ready, HDCP compliant • Auto signal equalization and EDID learning • Power Supplies (2): 5V DC

KEY PART # DESCRIPTION A 90-12070 HDMI Over Fiber Optic Extender With IR (1,200m) B 90-12071 HDMI Over Fiber Optic 3D Extender With IR (1,600m)

PRICE $779.92 $1286.25

Part # 90-12071

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T

AV DISTRIBUTION

HDMI Converters PC RJ45 to HDMI/VGA Over LAN Converter

Regardless of what output connections your PC/laptop may have, this cuttingedge converter allows extension of computer screen and control by directly connecting to computer’s RJ45 Ethernet port with CAT5E/CAT6 cabling. Connect straight to the converter on display end, up to 328ft/100m away, or run signal through dedicated Ethernet switch/router first. Provides outputs for either HDMI or VGA for display, and includes two USB ports to control PC peripherals such as keyboard and mouse. Perfect networking display solution allows multiple users connected to same network to access a remote display. Users can share multimedia content stored on their computer from anywhere in building or facility. FEATURES:

• Supports up to HD 1080p or 1920x1080 resolutions with primary display, mirror desktop and extended desktop video modes • Multiple PCs and multiple converters/displays can be connected to same router, but product supports only one PC-to-display connection at a time. • Allows multiple users to share a Multi-Function Print (MFP) over a network to print, scan, and fax from any networked computer • Support 500mA electric current for both USB ports (not compatible for combination with other USB hubs) • Supported protocols: TCP/IP, LPR, DHCP, UPnP • Ethernet IEEE 802 3 10Base IEEE • Standards: 802.3 10Base-T; 802.3U 100Base-T • Network Interface: 10/100/1000 Mbps, RJ45 • Support Windows 7,Vista and XP; software driver included

PART # 90-12039

DESCRIPTION PC to HDMI/VGA Over LAN Converter

PRICE $145.35

SDI to HDMI Converter

This converter is ideal for broadcast/production studio applications where SDI is the standard interface. This converter makes it easier for professionals to distribute and extend 3G SDI signals while providing the ability to display production work on HDMI displays instead of more expensive SDI compatible displays. FEATURES: • Input: 1xSDI; Output: 1x HDMI • Auto-detect resolution of HD-SDI, SD-SDI and 3G-SDI • Date rate: 270Mb/s, 1.485Gb/s, 2.97Gb/s. Impedance: 75Ω • Supports signal transmission distances of up to 300M for SDI signals, 200M for HD signals and 100M for 3G signals • SDI input: SD 525i, 625i; HD720P@24HZ, 720P@25HZ, 720P@30HZ,720P@50HZ, 720P@60HZ, HD 1080i@50HZ; 1080i@60HZ; HD 1080P@24HZ, 1080P@25HZ, 1080P@30HZ, 1080P@50HZ,1080P@60HZ • HDMI output:720P@50Hz, 720P@60Hz, 1080i@50Hz, 1080i@60Hz, 1080P@24Hz, 1080P@25Hz, 1080P@30Hz, 1080P@50Hz, 1080P@60Hz. Recommended resolutions: 720P@50Hz;720P@60Hz

For Expert Customer Service, Call Our Sales Team Today!

PART # DESCRIPTION 90-12038 SDI to HDMI Converter

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $87.35

AV DISTRIBUTION

HDMI Converters

HDMI Audio Extractor FEATURES:

• Use to extract audio signals from an HDMI source • Allows simultaneous output of toslink or coaxial digital and stereo 3.5mm analog audio signals • Supports 2.0CH/5.1CH audio switch • Supports High Definition Resolution 1080p and 3D • Supports 225 MHz/2.25 Gbps Per Channel Bandwidth (6.75 Gbps All Channels) • Supports 12 Bit per Channel Deep Color, 36 Bit Total • Supports Uncompressed Audio LPCM (Linear Pulse Code Modulation) • Supports Compressed Audio DTS Digital, Dolby Digital (DTS-HD and Dolby True HD) • HDCP Compliant • Power Supply: 5V DC, UL Listed • Dimensions: 2.75" W x .75" H x 2.378"

PART # DESCRIPTION 90-12049 HDMI Audio Extractor

PRICE $94.01

VGA 3.5mm Audio to HDMI 720p/1080p Converter Scaler This converter is designed to take video and audio signal from PC or Laptop and upscale it to digital HDMI output of wide-range HDTV and PC resolutions, up to 1080p. Plug and play, no software is needed. Great for connecting the VGA video output of your computer or media server and integrating it into a new digital HDMI Home Theater System.

FEATURES:

• Up-scales VGA to HDMI 720P or 1080P • Supports VGA Input: 640x480@60/75Hz, 800x600@60/75Hz, 1024x768@60Hz, 1280x720@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1360x768@60Hz, 1440x900@60Hz, 1400x1050@60Hz, 1680x1050@60Hz, 1920x1080@60Hz. (Recommended input resolution: 1024x768@60Hz) • Supports HDMI Output: 720p/60Hz, 1080p/60Hz • Auto-store setting of output resolution • Product Dimension: 119 x 74 x 23 mm ( L x W x H ) • HDMI 1.3 and HDCP compliant • Maximum Operation Range: 49.5 ft. (15 m) • Power Supply: DC 5V, AC 100-240V PART # 90-12014

DESCRIPTION VGA to HDMI Converter

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $59.98

Stock Orders Shipped Same Day until 5 P.M. C.S.T

AV DISTRIBUTION

HDMI Converters Composite Video/S-Video to HDMI Converter Scaler

RCA Composite video and S-video to HDMI Scaler takes either Composite Video or S-Video as input and converts it to HDMI. It allows older analog devices to be integrated into HD home theater system. FEATURES:

• Scales up Composite Video or s-video to HDMI 720p

• Motion Compensated 3D Wavelet Video Coding Technology is applied to make the converted picture rich in color and more vivid

• Input audio is integrated into HDMI output as well as pass-through to earphone or sound box • Input video systems - NTSC and PAL is automatically detected and adjusted

PART # 90-12015

DESCRIPTION Composite Video/S-Video to HDMI Converter

PRICE $72.50

Component Video to HDMI Converter

Component Video (YPbPr) to HDMI converter box transforms Component Video (YPbPr) and Audio R/L or SPDIF signal to HDMI output. It enables the connection of devices with YPbPr output, e.g. PSP, PS2, Wii, XBOX, STB, DVD, Player, Projector, etc. to HDTV, offering you perfect view when you watch movies or play games.

FEATURES:

• Device Type: Component Video to HDMI converter. Interface Type: YPbPr and Stereo audio In, HDMI Out • Purely for conversion between video formats, not to convert the input/output video resolutions • Compliant with HDMI 1.3 and HDCP • Input Component Video: 480P@60Hz, 576P@50Hz, 720P@50/60Hz, 1080i@50/60Hz • Output HDMI: 480P@60Hz, 576P@50Hz,720P@50/60Hz, 1080i@50/60Hz • Supports SPDIF digital 5.1 audio • HDMI Transmission Rate/Bandwidth: 5Gbps • Maximum Signal Transmission Distance: 49.5 ft (15 meters) • Output Video Impedance Matching: 75Ω • Compatible with HDMI 1.3 and HDCP • Working Temperature: -25℃～75℃ • Working Humidity: 10%-60% • Power Supply: DC 5V 1A

For Expert Customer Service, Call Our Sales Team Today!

PART # 90-12012

DESCRIPTION Component Video to HDMI Converter/Scaler

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $56.30

AV DISTRIBUTION

HDMI Converters

All Video To HDMI Converter Scaler Switcher

FEATURES:

• Allows the conversion of up to 11 multi-format inputs to 2 HDMI outputs • Allows upscaling and switching from standard definition/high definition sources to resolutions up to 720p or 1080p, with both outputs working simultaneously some VESA formats can be bypassed by using VGA and DVI-I ports • Buffers, amplifies and equalizes the signal to ensure optimum transmission and reception over the length of the cable run without any loss in video/audio quality • Inputs supported include: ◦ 1 x VGA source ◦ 1 x S-Video source ◦ 2 x Composite AV sources with stereo audio ◦ 2 x Component sources with analog audio ◦ 4 x HDMI sources (with one supporting 5.1 multichannel digital audio) ◦ 1 x DVI-I source with analog audio and digital audio via optical* • HDMI Outputs feature separate analog audio outputs • Allows display(s) to view any source at anytime • Supports bypass function with VGA and DVI-I ports • DVI-I supports both analog and digital formats with L/R and optical audio input* • Detached audio output by L/R and optical • Delivers uncompressed digital video with zero signal loss • Supports high definition resolutions up to 1080p • Can bypass scaling and output as source • 10-bit triple-ADC for RGB/YPbPr • Dual switching option: IR control with remote handset and manual front panel control • Additional Remote control function with RS232 connectivity • Power Supply: 5V DC, UL Listed PART # DESCRIPTION • Dimensions: 17.2” W x 1.6” H x 7.4” D

90-12019 All Video To Hdmi Converter Scaler Switcher

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $397.63

Stock Orders Shipped Same Day until 5 P.M. C.S.T

AV DISTRIBUTION

HDMI Wireless HDMI Wireless Extender Set

5 GHz Wireless HDMI transmitter and receiver set offers a plug-and-play method of extending audio/video 20 meters open field and 10 meters through walls. Using WHDI technology, delivers perfect replication of high definition visuals, and full digital audio without any signal latency. Compatible with all common HD media source devices and displays (LCD / LED TV, Plasma, Projectors). IR pass-thru control allows remote of HD source device to be used on display end. SPECIFICATIONS:

• Supports video resolutions up to 1080p including 3D formats; Up to 1920x1080 for PC • Supports HDMI 1.3/1.4 video format and HDCP 1.2/2.0 with video encryption • Operating Frequency: 5.1 GHZ to 5.9 GHz • Antenna: High Performance Internal Antennas • IR Frequency Bandwidth: 38 KHz • Includes (1) HDMI 3ft. cable, (1) IR extension cable, and remote control • Power supply: (2) DC Output 5V, AC Input 100-240V

FEATURES:

• Includes 5 GHz wireless transmitter and receiver • Real-time, uncompressed HD audio/video using WHDI Technology • Transmission distance reaches 20 meters open field and 10 meters through walls (actual distances will depend on construction building, walls, etc.) • Extends IR and CEC signals for remote control of AV equipment

PART # DESCRIPTION 90-12030 HDMI Wireless Extender Set

PRICE $277.23

VGA/HDMI Wireless Presentation System

Connect any PC/Mac, PDA, or Windows Mobile with Wi-Fi wireless to access the projector or HDTV with VGA or HDMI port and display up to 4 users simultaneously. Conference control function is perfect for conference, classroom, and training sessions for real-time video and audio presentations. It feature Wi-Fi access point, log-in protection for secured access, changeable Standby Splash Screen, and built-in DHCP / SNMP provides installation flexibility. • Supports 10/100BaseT Wired-LAN, Wi-Fi IEEE802.11b/g/n, A/V streaming up to 720p, and DirectX application projection such as AutoCAD, ProE & PC games • Works with Windows Mobile, 7/Vista/XP/2K & Mac OS X systems

PART # DESCRIPTION 90-12062 VGA/HDMI Wireless Presentation System

For Expert Customer Service, Call Our Sales Team Today!

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $371.55

AV DISTRIBUTION

VGA Cables and Wall Plates

VGA CABLES

These premium Super VGA HD15 cables are ideal for video presentation devices, video splitter and KVM. Constructed of premium grade shielded video cable, which uses a combination of FEATURES: • Resolution: Tested up to 1600 x 1200 • Supports up to UXGA

coax and twisted pair, these Super VGA cables feature mini-coax, overall shield cable with high density 15-pin connectors. Ferrite core helps eliminate EMF interference.

SVGA Cables ID BIT / DDC COMPATIBLE

Male to Female

SVGA with Audio Cables

SVGA HD15 with 3.5mm stereo audio plugs for extending audio as well as video. Double shielding (foil and braid) provides maximum EMI/RFI protection. This is a supreme high performance solution for quickly connecting your PC to a video display system with speakers.

A KEY A A A A A A B

B PART # 32-235-36 32-235-72 32-235-120 32-235-300 32-235-600 32-235-900 32-207-Y

DESCRIPTION SVGA Ferrite/3.5 MM Stereo M/M 3' SVGA Ferrite/3.5 MM Stereo M/M 6' SVGA Ferrite/3.5 MM Stereo M/M 10' SVGA Ferrite/3.5 MM Stereo M/M 25' SVGA Ferrite/3.5 MM Stereo M/M 50' SVGA Ferrite/3.5 MM Stereo M/M 75' SVGA/2 Monitor Share M/2F

PRICE $6.93 $8.66 $10.69 $21.53 $32.81 $51.45 $4.60

PART # 32-206-36 32-206-72 32-206-120 32-206-180 32-206-300 32-206-420 32-206-600 32-206-900 32-206-1200

Male to Male

SIZE 3Ê 6Ê 10Ê 15Ê 25Ê 35Ê 50Ê 75Ê 100Ê

PRICE $6.70 $8.14 $10.37 $12.74 $17.85 $22.31 $31.24 $45.41 $61.69

PART # SIZE 32-208-36 3Ê 32-208-72 6Ê 32-208-120 10Ê 32-208-180 15Ê 32-208-300 25Ê 32-208-420 35Ê 32-208-600 50Ê 32-208-900 75Ê 32-208-1200 100Ê

PRICE $6.70 $6.86 $10.37 $12.74 $17.85 $22.31 $31.24 $45.41 $51.19

Plenum SVGA Cables 100% Plenum Rated jacket.

Male to Male PART # 32-250-72 32-250-180 32-250-300 32-250-420 32-250-600

SIZE 6Ê 15Ê 25Ê 35Ê 50Ê

PRICE $98.70 $113.40 $115.50 $121.80 $161.70

PART # SIZE 32-210-72 6 ft. 32-210-120 10 ft.

PRICE $15.10 $18.90

ID BIT / DDC COMPATIBLE PART # 32-250-900 32-250-1200 32-250-1800

SIZE 75Ê 100Ê 150Ê

PRICE $235.20 $485.00 $567.00

DECRIPTION VGA and L/R Audio RCA Jacks Decor Wall Plate

PRICE $13.99 $10.18

VGA/RGBHS Cables

Used to attach a monitor with RGB, vertical sync and horizontal inputs to a PC’s VGA port, VGA/RGBHS cables are configured with a HD15M at the PC end to five BNC male plugs for the monitor end.

VGA WALL PLATES

KEY A B C

B PART # 60-13044 60-13042 60-13043

DECRIPTION VGA Wall Plate Insert with Dual Keystone Openings

VGA Wall Plate VGA Dual Wall Plate

PRICE $18.30 $7.27 $14.59

KEY PART # D 60-13145 E 60-13144

VGA with 3.5mm Stereo Audio Wall Plate

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T

AV DISTRIBUTION

VGA Wall Plates PROFESSIONAL VGA ALUMINUM WALL PLATES

While plastic wall plates provide an adequate solution, MilesTek understands that some commercial environments are more physically demanding and require a more durable metal wall plate.

digital signage areas. Combined with our AV cables and devices, MilesTek customers now have professional end-to-end installation solutions. • Includes engraved text • Durable 1/8" (11 gauge) aluminum • Double beveled edges, .0635 at 45 degrees • Clear anodized finish • Vertical grain • Feedthrough Connectors • Matching mounting screws supplied • Fits standard low voltage boxes • Made in the USA Custom Configurations Available

With durability in mind, we are pleased to introduce our new highquality, clear anodized aluminum wall plates. These plates provide a rugged mounting surface for professional AV connectivity and are designed to stand up to years of continued service while maintaining an aesthetically pleasing appearance. Each plate is individually assembled and engraved, and comes complete with matching mounting hardware.

These plates are perfect for commercial systems integration. Examples of applications include classroom and educational facilities, corporate conference rooms and boardrooms, houses of worship, and other

KEY PART #

A B C D E F

DESCRIPTION

PRICE

60-53042 60-53043 60-53144 60-53145 60-53146 60-53246

1 Gang VGA Wall Plate 1 Gang Dual VGA Wall Plate 1 Gang VGA w/ 3.5 Audio Wall Plate 1 Gang Dual VGA w/ 3.5 Audio Wall Plate 1 Gang VGA w/ 3.5 Audio, 3 RCA Wall Plate 2 Gang Dual VGA w/ 3.5 Audio, 3 RCA Wall Plate G 60-53147 1 Gang VGA w/ 3.5 Audio, RJ45, 3 RCA Wall Plate

$19.45 $29.72 $31.06 $50.42 $48.47 $54.12 $68.36

D-Sub/HD Gender Changers A B C D

KEY PART # A 10-24500 B 10-24501 10-24508 C 10-24502 D 10-24503 10-24509

For Expert Customer Service, Call Our Sales Team Today!

DESCRIPTION DB9 M-M DB9 F-F DB9 M-F DB15 M-M DB15 F-F DB15 M-F

PRICE $2.63 $2.63 $4.20 $4.20 $4.20 $12.34

E F

G H

KEY E F G

PART # 10-24504 10-24505 10-24506 10-24511 H 10-24507

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

DESCRIPTION DB25 M-M DB25 F-F HD15 M-M HD15 M-F HD15 F-F

PRICE $3.41 $3.41 $5.25 $6.30 $4.46

AV DISTRIBUTION

VGA Splitters A

VGA Splitters

This VGA splitter and distribution amplifier is used to take video input from a single source and direct it to two, four or eight video outputs for monitors using analog signals. The signal boost allows you to not only split the signal but to extend the distance of the signal to about 210 feet. (Your average VGA card, combined with a standard VGA cable, can send a clear VGA signal approximately 25 feet.) This makes public broadcasts from a single computer very feasible. If you want to display the same information on many monitors at once, such as in a classroom environment, or at a demonstration, this product performs incredibly well.

FEATURES: • 2, 4 and 8 port models available • High 250 MHz video bandwidth • Resolution: 1920 x 1440 in 24 or 32 bit true color mode • Transmission distance of up to 210 feet • Suitable for SVGA, VGA and Multi-sync monitors. • Daisy-Chain multiple units together for even more outputs • Ideal for public broadcasting; remote monitoring; classroom and training facilities

VGA Splitters with 3.5 Stereo Audio

Connects two or four monitors and audio to one computer and broadcast to multiple monitors/audio simultaneously with the VGA with Audio video splitter. Its built-in video extender ensures clear and sharp images as far as 213ft away from the CPU. Use video splitter to enhance your presentations as well as broadcasting of real-time data. It is ideal for classrooms & training facilities, and remote security monitoring. To ensure the best video integrity, the video splitter has a high bandwidth of 400MHz, FEATURES: • Multi-function • With 400 MHz Pixel Frequency • Turn on or off the monitor by means of the front panel switch • Extends video signal for distance up to 65m • Supports the DDC, DDC2, DDC2B (For video out port 1)

KEY A B C

PART # PORTS 90-20105 2 90-20106 4 90-20107 8

PRICE $46.06 $76.57 $131.22

up to 2048x1536 maximum resolution and a two level cascade capability that provides for future expansion. Supports analog plasma screen & flat panel, projectors and any VGA monitor types & sizes. Includes power adaptor. D

• Can be cascaded • The output is compatible with standard VGA card • General audio line level output • Allowed to use the general earphone

E KEY PART # PORTS D 90-20202 2 E 90-20203 4

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $59.02 $121.56

Stock Orders Shipped Same Day until 5 P.M. C.S.T

AV DISTRIBUTION

VGA Switchers VGA Switchers with 3.5mm Stereo Audio

Two or four computers can share one monitor, projector or any video display with VGA port. This premium video selector has a high bandwidth of 250MHz to maintain video integrity and provides clear & sharp images. Ideal for presentations, classrooms, control center, remote monitoring & training facilities. Provides high resolution up to

1920x1440, status LEDs, front panel port selector and supports analog flat panel, projectors, VGA monitors, HDTV’s.

FEATURES: • Resolution up to 1920x1440

• Pixel frequency up to 250MHz

• Supports DDC1, DC2, DDC2B, DDC2B+, DDC2AB (For video out port 1) • Hot pluggable

• Auto skip over the power-off and suspended PC, and the unplugged VGA cable

KEY PART # PORTS F 90-20208 2 G 90-20209 4

VGA MATRIX SWITCHERS

This is a video share and video splitter in one switch. Two computers can share two or four monitors, projectors or any video displays with VGA port (Video Share), or a computer can control the two or four video output and project to all monitors (Video Splitter). This premium video selector has a high bandwidth of 250MHz to maintain video integrity and provides clear & sharp images. Ideal for presentations, classrooms, control center, remote monitoring & training facilities. Provides high resolution up to 1920x1440, status LEDs, front panel

PRICE $66.24 $119.55

port selector and supports analog flat panel, projectors & VGA monitors up to 21". Includes power adaptor.

VGA Video Matrix Switchers with Audio FEATURES: • Intelligent functionality

• With 250 MHz Pixel Frequency

• Extends video signal for distance up to 65m

• Supports the DDC, DDC2, DDC2B. (For video out port 1 and 2)

VGA Matrix Switchers

FEATURES: • Resolution up to 1920x1440

• Can be cascaded

• The output is compatible with standard VGA card

• Pixel frequency up to 250MHz

• Free select from PC(A) or PC(B) or switch off by means of the front panel switch

• Supports DDC1, DC2, DDC2B, DDC2B+, DDC2AB (For video out port 1) • Hot pluggable

• Auto skip over the power-off and suspended PC, and the unplugged VGA cable C

A KEY PART # DESCRIPTION A 90-20210 VGA Matrix Switcher B 90-20211 VGA Matrix Switcher

For Expert Customer Service, Call Our Sales Team Today!

PORTS 2x2 2x4

PRICE $41.91 $113.08

E KEY C D E

PART # 90-20215 90-20216 90-20217

DESCRIPTION VGA Video Matrix Switcher with Audio VGA Video Matrix Switcher with Audio VGA Video Matrix Switcher with Audio

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PORTS 2x2 2x4 4x4

PRICE $123.56 $154.05 $269.69

AV DISTRIBUTION

VGA Over CAT5E/CAT6

VGA OVER CAT5E/CAT6 SOLUTIONS

MilesTek’s high-resolution VGA over UTP devices extend the your video and stereo audio signals up to 1,000 feet from the VGA source using two CAT5/5E/6 cables. Receiver units have built-in equalization, gain control to adjust brightness and skew control. This is a perfect and reliable solution for situations where your VGA monitor needs to be located in maybe a separate room or floor

VGA 3.5mm Audio Over CAT5E/CAT6 Active Extender Set

from where the VGA source, i.e. computer workstation, is located. Running VGA over commonly used CAT5 cable results in greater signal distance, reduced material costs and ease of installation. Example applications include larger AV environments such as classroom and educational facilities, corporate conference rooms and boardrooms, houses of worship, and other digital signage areas.

FEATURES: • Set includes transmitter, receiver and power adapters for each • Transmitter module has loop-thru port for local monitor • Supports VGA/WUXGA up to 1920x1440 @ 60Hz. 1920x1200 to 100ft., 1280x1024 to 300ft., 1024x768 to 500ft. • Works with monitors, projectors, HDTV and flat panels

SPECIFICATIONS: • CAT5E/CAT6 Cable Equalization: Adjustable EQ Controls • Video Bandwidth: 150Mz • Insertion Loss: Less than 3db • Impedence: RGB - 75 Ohms unbalanced, CAT5E - 100 Ohms Balanced

PART # 90-12105

• Video Signal Return Loss: -15db Max from DC to 60MHz • Audio Frequency: 10Hz to 25KHz / -3dB • Audio Impedence/Connectors: 10k Ohms / 3.5mm • Operating Temperature: 32 to 120 degrees F • FCC, UL, CE, RoHS Compliant

PRICE $97.73

VGA RS232 IR Audio Over CAT5E/CAT6 Active Extender Set FEATURES: • Extends A/V & control signals • Control a projector or HDTV up to 1,000 ft. over CAT5E/CAT6 • Supports full WUXGA high-resolution at max distance • Supports analog stereo and digital SPDIF audio • Supports RS-232 serial with bi-directional IR blaster • Provides adjuctable EQ and gain control • Built-in mounting flange with locking power connectors • Includes transmitter, reveiver and IR emitters • Includes universal 100v-240v power adaptors • FFC, CE & RoHS compliant SPECIFICATIONS: • Video Bandwidth: 350MHz • Connectors: HD15 / DB9 / RCA / 3.5MM / RI45 • EQ & Gain Adjustment: Rotary • RS-232 Serial: Half-Duplex with Dual-Mode • Infra Red Frequency: 38KHz • Power Supply / Operating Temp: 5v 2A DC / 32 to 131ºF

PART # 90-12120

DESCRIPTION VGA RS232 IR Audio Over CAT5E/CAT6 Extender Set

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $287.00

Stock Orders Shipped Same Day until 5 P.M. C.S.T

AV DISTRIBUTION

VGA Over CAT5E/CAT6 VGA 3.5mm Audio Over CAT5E/CAT6 Active Extender Wall Plate Set

This extender device provides an economical, yet robust way to connect any VGA/WGA with audio devices using a single CAT5E or CAT6 cable. Perfect for any presentation application, it has 350MHz video bandwidth for clear and sharp images up to 1,000 ft. (300M) away. Provides gain and EQ control for optimal picture and decora wall plate styling. It supports resolution up to 1600x1200 @ 60Hz. Includes wall plate transmitter & receiver, and universal power adapters.

FEATURES: • Included in Kit: (1) transmitter, (1) receiver, (2) 12v DC power adaptors • Signal Type: VGA/SVGA, XGA/WUXGA Video • Bandwidth: 350MHz Connectors: HD15, RJ45, 3.5mm • Insertion Loss: Less than 3db • Impedance: RGB - 75 Ohms Unbalanced / CAT5E - 100 Ohms Balanced • Video Signal Return Loss: -15db Max from DC to 60MHz • EQ & Gain Adjustment: Rotary • Audio Frequency: 10Hz to 25KHz / -3d • Power Supply / Operating Temp: 12v DC 1.2A / 32 to 120˚F • Compliance: FCC, UL, CE, RoHS • Warranty: 1 year • Supported Distances: 1600x1200 @ 60Hzat 100 meters, 1280x1024 @ 60Hz at 120 meters, 1024x768 @ 60Hz at 180 meters, 800x600 @ 60Hz at 200 meters, and 640x480 @ 60Hz at 300 meters.

PART # 90-12106

PRICE $100.15

VGA Audio with Composite Vide/Audio Over CAT5E/CAT6 Passive Extender Wall Plate Set Intuitive design anticipates both computer and regular A/V application. This wall plate extender kit has shielded casing to meet government, school, and commercial requirements. Using 2xCAT5e RJ45 cables, it provides both PC VGA & stereo audio along with composite audio and video. USB port on transmitter plate allows power delivery via USB cable from laptop/computer when VGA port is non-powered. Supports 1280x1024 @60Hz up to 30 Meters. (Local Connectors: 1 HD15/3.5mm, 2 RJ45, 3 RCA female; Remote Connectors: 1 HD15/3.5mm, 2 RJ45, 3 RCA female) PART # 90-12119

For Expert Customer Service, Call Our Sales Team Today!

PRICE $130.85

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

AV DISTRIBUTION

VGA Over CAT5E/CAT6

VGA Audio CAT5E/CAT6 1x4 Splitter, 2-Port Expandable Receiver Kit This extender kit sends VGA video and audio using a single CAT5e cable. The transmitter module has built-in 4-Port RJ45 D/A with loop-out for local screen and speaker. Receiver module has dual-output VGA/Audio that allows you to connect two-sets of screens and speakers, it has gain and EQ control for optimal picture, and extra RJ45 port for daisy-chainability up to 3 levels. Supports resolution up to 1600x1200 @ 60Hz up to 100 meters, 1280x1024 @ 60Hz at 120 meters, 1024x768 @ 60Hz at 180 meters, 800x600 @ 60Hz at 200 meters and 640x480 @ 60Hz at 300 meters. FEATURES: • Provides pass-thru port for local monitor and speaker ° Tx provides up to 4 receivers with local pass-thru port ° Rx has build-in 2-Port D/A and RJ45 daisy-chain port ° Rx provides equalization and gain control • Expand as needed with 3-level daisy-chain capability • Supports VGA/UXGA up to 1600x1200 @ 60Hz • Starter Kit includes Tx/Rx and power adaptors • FCC, CE, and RoHS compliant KEY A B C

PART # 90-12114 90-12115 90-12109

DECRIPTION VGA Audio CAT5E/CAT6 Extend Kit 2-Port Expandable Receiver Only Wall Plate Receiver Only

A B

PRICE $189.00 $108.23 $66.23

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T

AV DISTRIBUTION

AV Feed-Thru Wall Plates HDMI WALL PLATES

KEY PART # A 60-10608 B 60-10609

DECRIPTION Single HDMI Pigtail Decor Wall Plate Dual HDMI Pigtail Decor Wall Plate

D PRICE $13.61 $20.04

E KEY PART #

DECRIPTION Single HDMI Pigtail and RGB Component C 60-10612 Video Triple RCA Jack Decor Wall Plate Single HDMI Pigtail and 3.5mm D 60-10613 Stereo Jack Decor Wall Plate HDMI VGA 3.5mm Audio Stainless E 60-10615 Steel Feed-Thru Wall Plate

PRICE $15.17 $14.32 $25.05

COMPONENT AND VIDEO WALL PLATES

KEY PART # F 60-10621 G 60-10622

DECRIPTION RGB Component Video Triple RCA Jacks Decor Wall Plate

RGB Component Video with Audio Wall Plate

PRICE $5.39 $10.99

KEY PART # H 60-10623

HDMI Cables

VGA Cables

See Page 16

See Page 36

DECRIPTION HDMI Wall Plate With Component Video

PRICE $36.08

VGA WALL PLATES

A KEY A B C

PART # 60-13044 60-13042 60-13043

DECRIPTION VGA Wall Plate Insert with Dual Keystone Openings

VGA Wall Plate VGA Dual Wall Plate

For Expert Customer Service, Call Our Sales Team Today!

C PRICE $18.30 $7.27 $14.59

KEY PART # D 60-13145 E 60-13144

DECRIPTION VGA and L/R Audio RCA Jacks Decor Wall Plate VGA with 3.5mm Stereo Audio Wall Plate

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $13.99 $10.18

AV DISTRIBUTION

AV Cable Assemblies

COMPONENT VIDEO (RGB) CABLES

These high-graded professional component video cables will give you the best conductivity signal and BLACK! quality. For use with video cameras, DVD, VCRs, DSS, High Definition digital TV (HDTV), VCR, DSS, DVD, TV and so on. Triple heavy-duty, superior shielded RG-59/U cables to maximum signal PART # SIZE transfer and minimize interference. Gold plated RCA plugs to improve conductivity. Color coded and 30-106-36-BLACK 3Ê labeled for the luminance (Y) and chrominance (Pr, Pb) Signals. Fully molded construction.

NOW IN

30-106-72-BLACK

RGB Video Cable

PART # 30-105-36-BLACK 30-105-72-BLACK 30-105-144-BLACK 30-105-300-BLACK 30-105-600-BLACK 30-105-900-BLACK 30-105-1200-BLACK

SIZE 3Ê 6Ê 12Ê 25Ê 50Ê 75Ê 100Ê

PRICE $5.60 $8.05 $11.43 $20.77 $35.70 $53.43 $71.17

3.5 mm Stereo Audio Patch Cords SIZE 6Ê 12Ê 25Ê 50Ê

SIZE 6Ê 12Ê 25Ê 50Ê

SIZE 3Ê 6Ê 12Ê 25Ê

Video RCA to RCA RG59 Cables

30-106-420-BLACK 30-106-600-BLACK 30-106-900-BLACK 30-106-1200-BLACK

PART # 30-102-36 30-102-72 30-102-144 30-102-216 30-102-300 30-102-600

PRICE $2.10 $2.59 $3.78 $6.65

PRICE $5.39 $5.99 $6.56 $43.23

30-106-300-BLACK

6Ê 10Ê 12Ê 15Ê 25Ê 35Ê 50Ê 75Ê 100Ê

SIZE 3Ê 6Ê 12Ê 25Ê

PRICE $1.68 $2.25 $3.63 $6.06

Audio/Video RCA Gold Plated Patch Cables

RG59 BNC to RCA Cables RG59 BNC-BNC Cables

PART # 20-613-36 20-613-72 20-613-144 20-613-300

30-106-144-BLACK 30-106-180-BLACK

PART # 30-101-36 30-101-72 30-101-144 30-101-300

PRICE $1.58 $2.10 $5.60 $9.45

Male to Female Extension PART # 38-101-72 38-101-144 38-101-300 38-101-600

30-106-120-BLACK

Audio RCA Gold Plated Patch Cables

Male to Male PART # 38-100-72 38-100-144 38-100-300 38-100-600

RGB Video Cable w/ Stereo Audio

PRICE $8.98 $10.73 $16.78 $16.80 $18.03 $27.07 $37.34 $49.47 $53.43 $94.50

PART # SIZE 20-612-36 3Ê 20-612-72 6Ê 20-612-144 12Ê 20-612-300 25Ê 20-612-600 50Ê 20-612-900 75Ê 20-612-1200 100Ê PART # 20-614-72 20-614-144 20-614-300 20-614-600

PRICE $2.76 $3.18 $6.30 $6.98 $13.13 $38.06 $47.25 SIZE 6Ê 12Ê 25Ê 50Ê

PRICE $4.60 $8.40 $3.92 $22.31

SIZE 3Ê 6Ê 12Ê 18Ê 25Ê 50Ê

PRICE $3.02 $3.90 $4.65 $6.15 $12.30 $17.47

3.5mm Stereo to RCA Y Cables

10-22022

10-22023

3.5mm to 2 RCA Y Cables are designed for quality computer audio applications. 3.5mm audio cables connect the PC sound card, portable CD player or any mini-stereo audio device with 3.5mm or RCA jacks to multimedia speakers. All “Y” cables are 6 inches. PART # 10-22021 10-22022 10-22023 10-22025 10-22030 10-22031 10-22027

DESCRIPTION SIZE 3.5mm Stereo Male to (2) 3.5mm Stereo Females 6‰ 3.5mm Stereo Female to (2) 3.5mm Stereo Males 6‰ 3.5mm Stereo Male to (2) RCA Females 6‰ 3.5mm Stereo Male to (2) RCA Males 6‰ 3.5mm Stereo Female to (2) RCA Males 6‰ 3.5mm Stereo Male to (2) RCA Females 6 ft. 3.5mm Stereo Male to (2) RCA Males 6 ft.

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $3.28 $2.89 $2.89 $1.61 $1.89 $3.10 $2.84

Stock Orders Shipped Same Day until 5 P.M. C.S.T

AV DISTRIBUTION

Quick-Connect Cabling System

SVGA + Stereo Audio Solution Basic Run Cable: Type A

TYPE A BASIC RUN CABLE

• 3-28 AWG Coaxial Cables with Braided Copper Shielding, 3-24 AWG Twisted Pair and a single 24 AWG Pair, Mylar™ Foil Shield

• UXGA Supports PC Resolutions up to 1600 x 1200 Pixels Includes protective caps with pulling eyes that are able to withstand a maximum pulling tension of 30 pounds

• Available in CL2-rated PVC jacket for residential installations and CMP jacket for commercial installations SIZE 15Ê 25Ê 35Ê 50Ê 75Ê 100Ê 125Ê 150Ê

PVC PART # QC01-A-15 QC01-A-25 QC01-A-35 QC01-A-50 QC01-A-75 QC01-A-100 QC01-A-125 QC01-A-150

PRICE $22.10 $31.79 $41.35 $55.76 $79.85 $103.95 $122.85 $150.73

PLENUM PART # QC02-A-15 QC02-A-25 QC02-A-35 QC02-A-50 QC02-A-75 QC02-A-100 QC02-A-125 QC02-A-150

PRICE $50.63 $80.93 $110.54 $155.95 $225.04 $292.15 $373.09 $446.12

Din14 Male to HD15 Male + 3.5mm Stereo Plug Adapter Cable

front

PART # QC03-HD15M-35M-01 QC03-HD15M-35M-03 QC03-HD15M-35M-06 QC03-HD15M-35M-10

back

KEY PART # DESCRIPTION A QC04-HD15-35F-FP HD15 VGA + 3.5mm Female Wall Plate

Din14 Male to HD DB15 Male Adapter Cable PART # SIZE PRICE QC03-HD15-01 1Ê $9.11 QC03-HD15-03 3Ê $11.58 QC03-HD15-06 6Ê $12.65 QC03-HD15-10 10Ê $16.43

O.D. 0.73‰

back

FEMALE

Din14 Male to Din 14 Female „A‰ Wall Plate PART # QC04-D14A-FP

PRICE $15.23

KEY PART # DESCRIPTION B QC04-HD15-FP HD15 VGA Female Wall Plate

O.D. 0.73‰

• 5-28 AWG Coaxial cables with Mylar™ Foil and 85% Braided Copper Shielding

• Ideal for A/V and Component Video Applications Compatible with Analog and S/PDIF Digital Audio

• Includes protective caps with pulling eyes that are able to withstand a maximum pulling tension of 30 pounds

O.D. 0.73‰

MALE

FEMALE

Composite Video + Stereo Audio Basic Run Cable: Type B

PRICE $25.36 $38.17 $50.59 $69.67 $100.10 $119.54 $142.49 $156.98

For Expert Customer Service, Call Our Sales Team Today!

PLENUM PART # QC02-B-15 QC02-B-25 QC02-B-35 QC02-B-50 QC02-B-75 QC02-B-100 QC02-B-125 QC02-B-150

PRICE $73.50 $119.70 $163.80 $231.00 $336.00 $447.30 $558.60 $667.80

Din14 Male to Din 14 Female „B‰ Wall Plate PART # QC04-D14B-FP

• Available in CL2-rated PVC jacket for residential installations and CMP jacket for commercial installations PVC PART # QC01-B-15 QC01-B-25 QC01-B-35 QC01-B-50 QC01-B-75 QC01-B-100 QC01-B-125 QC01-B-150

PRICE $14.44

DIN14 Connector

TYPE B BASIC RUN CABLE

SIZE 15Ê 25Ê 35Ê 50Ê 75Ê 100Ê 125Ê 150Ê

PRICE $17.33

Basic Run Cable: Type A

DIN14 Connector

MALE

PRICE $9.35 $12.05 $16.20 $21.74

SVGA High Density DB15 Solution

front

O.D. 0.73‰

SIZE 1Ê 3Ê 6Ê 10Ê

Din14 Male to 3 RCA Male (RWY) Adapter Cable

front

B back

PART # QC03-RWY-01 QC03-RWY-03 QC03-RWY-06 QC03-RWY-10

SIZE 1Ê 3Ê 6Ê 10Ê

KEY PART # DESCRIPTION B QC04-RWY-FP 3 RCA Composite Video + Stereo Audio Plate

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $15.23

PRICE $8.27 $9.35 $10.87 $13.47 PRICE $12.86

AV DISTRIBUTION

Quick-Connect Cabling System

TYPE B BASIC RUN CABLE (continued) Component Video + Stereo Audio Solution

Component Video 3RCA (RGB) Solution

Basic Run Cable: Type B

Din14 Male to 5 RCA Male Adapter Cable

front

C back

PART # QC03-5RCA-01 QC03-5RCA-03 QC03-5RCA-06 QC03-5RCA-10

SIZE 1Ê 3Ê 6Ê 10Ê

KEY PART # DESCRIPTION C QC04-5RCA-FP 5 RCA Component + Stereo Audio Plate

Din14 Male to 3 RCA Male (RGB) Adapter Cable

front

PRICE $10.11 $13.23 $17.96 $23.39 PRICE $15.49

D back

PART # SIZE QC03-RGB-01 1Ê QC03-RGB-03 3Ê QC03-RGB-06 6Ê QC03-RGB-10 10Ê

KEY PART # DESCRIPTION D QC04-RGB-FP 3 RCA Component Video Wall Plate

PRICE $8.27 $9.35 $10.87 $13.47 PRICE $12.86

Component Video (3RCA)+ Digital Audio (1RCA) Solution Composite Video (1RCA)+ S Video (MIN DIN 4) +Stereo Audio Solution Basic Run Cable: Type B Basic Run Cable: Type B

Din14 Male to 4 RCA Male Adapter Cable

front

E back

PART # QC03-4RCA-01 QC03-4RCA-03 QC03-4RCA-06 QC03-4RCA-10

SIZE 1Ê 3Ê 6Ê 10Ê

KEY PART # DESCRIPTION E QC04-4RCA-FP 4 RCA Component + Digital Audio Plate

front

PRICE $9.35 $12.42 $17.15 $23.52 PRICE $14.44

Component Video RGB (3BNC) Solution

Din14 Male to 3 RCA + MDIN4 Adapter Cable F back

KEY PART # DESCRIPTION F QC04-MD4-FP 3 RCA Composite + S-Video Wall Plate

front

G back

PART # QC03-3BNC-01 QC03-3BNC-03 QC03-3BNC-06 QC03-3BNC-10

KEY PART # DESCRIPTION G QC04-3BNC-FP 3 BNC Component Video Wall Plate

SIZE 1Ê 3Ê 6Ê 10Ê

PRICE $13.00 $14.31 $16.31 $18.90 PRICE $15.49

PRICE $9.82 $12.89 $17.62 $23.99 PRICE $15.49

Component Video RGBHV (5BNC) Solution

Basic Run Cable: Type B

Din14 Male to 3 BNC Adapter Cable

PART # SIZE QC03-MD4-01 1Ê QC03-MD4-03 3Ê QC03-MD4-06 6Ê QC03-MD4-10 10Ê

Din14 Male to 5 BNC Adapter Cable

front

H back

PART # QC03-5BNC-01 QC03-5BNC-03 QC03-5BNC-06 QC03-5BNC-10

KEY PART # DESCRIPTION H QC04-5BNC-FP 5 BNC Component Video Wall Plate

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

SIZE 1Ê 3Ê 6Ê 10Ê

PRICE $18.67 $21.74 $26.36 $32.60 PRICE $18.11

Stock Orders Shipped Same Day until 5 P.M. C.S.T

AV DISTRIBUTION

Quick-Connect Cabling System TYPE C BASIC RUN CABLE

DVI Digital Link Solution

front

Basic Run Cable: Type C

• 4-28 AWG twisted pairs with Mylar™ foil and drain wire, 28 AWG twisted pair and 5-28 AWG conductors

• Optimized design for TMDS uncompressed digital video; such as HDMI and DVI application. • Includes protective caps with pulling eyes that are able to withstand a maximum pulling tension of 30 pounds

• Available in CL2-rated PVC jacket for residential installations and CMP jacket for commercial installations SIZE 15Ê 25Ê 35Ê 50Ê 75Ê 100Ê 125Ê 150Ê

PVC PART # QC01-C-15 QC01-C-25 QC01-C-35 QC01-C-50 QC01-C-75 QC01-C-100 QC01-C-125 QC01-C-150

PRICE $30.50 $40.61 $50.61 $65.71 $79.83 $225.75 $262.40 $309.94

PLENUM PART # QC02-C-15 QC02-C-25 QC02-C-35 QC02-C-50 QC02-C-75 QC02-C-100 · ·

PRICE $48.72 $78.96 $105.84 $147.84 $215.04 $431.55 · ·

DIN19 Connector O.D. 0.73‰

Din19 Male to Din 19 Female „C‰ Wall Plate

FEMALE

PART # QC04-D19-FP

HDMI Extender/Equalizer

PRICE $23.63

(for QC Type C cables 35 ft. or longer)

The HDMI Extender automatically adjusts and compensates for cable attenuation up to 40dB. In addition, it can be powered directly from the cable without an external power supply up to 150 feet which is ideal for long distance application. PART # 90-12009 90-12010

Din19 Male to DVI Male Adapter Cable PART # SIZE QC03-DVID-01 1Ê QC03-DVID-03 3Ê QC03-DVID-06 6Ê QC03-DVID-10 10Ê

PRICE $11.00 $12.76 $15.59 $19.14

KEY PART # DESCRIPTION J QC04-DVID-FP DVID Female Wall Plate K 90-12300 DVID Extender up to 150 ft.

PRICE $17.33 $76.13

TECH NOTE: Type C Basic Run Cables 35 ft. or longer MUST be used with an HDMI or DVI extender/equalizer. See options on this page.

DVI with Audio Digital Link Solution

O.D. 0.73‰

MALE

back

DESCRIPTION HDMI Extender/Equalizer HDMI Extender Pigtail Adapter Cable

Basic Run Cable: Type C

Din19 Male to DVI Male Adapter Cable PART # SIZE QC03-DVID-35M-01 1Ê QC03-DVID-35M-03 3Ê QC03-DVID-35M-06 6Ê QC03-DVID-35M-10 10Ê

front

PRICE $11.34 $13.37 $16.31 $21.87

back

KEY PART # DESCRIPTION L QC04-DVID-35F-FP DVID with 3.5mm Audio Female Wall Plate

PRICE $41.48

PRICE $40.95 $46.20

HDMI Digital Link Solution

Basic Run Cable: Type C

90-12009

90-12010

Din19 Male to HDMI Male Adapter Cable PART # SIZE PRICE QC03-HDMI-01 1Ê $11.34 QC03-HDMI-03 3Ê $13.23 QC03-HDMI-06 6Ê $16.12 QC03-HDMI-10 10Ê $20.03 KEY PART # DESCRIPTION M QC04-HDMI-FP HDMI Female Wall Plate

For Expert Customer Service, Call Our Sales Team Today!

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $17.59

AV DISTRIBUTION

Quick-Connect Cabling System

QUICK-CONNECT INTEGRATED WALL PLATES & CABLES Integrated Wall Plate - Single Gang A

KEY PART # A B C D E F

DESCRIPTION

PRICE

QC04-VR-1-SFP

DIN 14 Male to HD 15 F,RCA F/Composite Video Single Gang Wall Plate

$17.33

QC04-A2R-1-SFP

DIN 14 Male to 3.5 mm Jack and, 2 RCA F/Stereo Audio Single Gang Wall Plate

$24.73

QC04-VACN-2-SFP HD 15, 3.5 mm stereo, Component Video Single Gang Wall Plate with two fly leads

$47.57

QC04-VACP-1-SFP HD 15, 3.5 mm stereo, Composite Video/Audio Single Gang Wall Plate with one fly lead

$30.40

QC04-VACP-2-SFP HD 15, 3.5 mm stereo, Composite Video/Audio Single Gang Wall Plate with two fly leads

$34.97

QC04-VACPS-2-SFP HD 15, 3.5 mm stereo, Composite Video/Audio and S-Video Single Gang Wall Plate with two fly leads

$47.41

Integrated Wall Plate - Double Gang G

KEY PART #

DESCRIPTION

PRICE

G QC04-VACPK-1-DFP HD 15, 3.5 mm stereo, Composite Video/Audio with four keystone jacks cutouts Double GangWall Plate with one fly lead H QC04-VACPK-2-DFP HD 15, 3.5 mm stereo, Composite Video/Audio with four keystone jacks cutouts Double Gang Wall Plate with two fly lead I QC04-VACPSK-2-DFP HD 15, 3.5 mm stereo, Composite Video/Audio and S-video with four keystone jacks cutouts Double Gang

$32.92

J QC04-VACNK-2-DFP

$41.74

Wall Plate with two fly lead HD 15, 3.5 mm stereo, Component Video with four keystone jacks cutouts Double Gang Wall Plate with two fly lead K

$39.06 $51.19

Adapter Cables KEY PART # K K K K

PRICE

QC03-VACP-1-18 DIN 14 Male to HD 15, 3.5 mm stereo, Composite Video/Audio Adapter Cable with 1.5ft long

$20.48

QC03-VACP-1-03 DIN 14 Male to HD 15, 3.5 mm stereo, Composite Video/Audio Adapter Cable with 3ft long

$23.10

QC03-VACP-1-06 DIN 14 Male to HD 15, 3.5 mm stereo, Composite Video/Audio Adapter Cable with 6ft long

$28.75

QC03-VACP-1-10 DIN 14 Male to HD 15, 3.5 mm stereo, Composite Video/Audio Adapter Cable with 10ft long

$36.23

KEY PART # L L L L

DESCRIPTION

PRICE

QC03-VACP-2-18 DIN14 Male to HD15, Composite Video, and Din14 male to 3.5mm Stereo and 2RCA audio Adapter cables, 2 pieces in a set

$21.89

QC03-VACP-2-03 DIN14 Male to HD15, Composite Video, and Din14 male to 3.5mm Stereo and 2RCA audio Adapter cables, 2 pieces in a set

$25.73

QC03-VACP-2-06 DIN14 Male to HD15, Composite Video, and Din14 male to 3.5mm Stereo and 2RCA audio Adapter cables, 2 pieces in a set

$33.47

QC03-VACP-2-10 DIN14 Male to HD15, Composite Video, and Din14 male to 3.5mm Stereo and 2RCA audio Adapter cables, 2 pieces in a set

$43.71

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T

AV DISTRIBUTION

Interseries Adapters, XLR Audio Interseries Adapters

KEY A B C D E F G H I J K L M N O P

M PART # 10-01014 10-01015 10-01016 10-01118 10-01017 10-01018 10-01019 10-01020 10-01021 10-01022 10-01082 10-01083 10-01095 10-01103 10-01098 10-01096

N O P INTERSERIES ADAPTERS DESCRIPTION RCA Male to BNC Male RCA Male to BNC Female RCA Female to BNC Male RCA Female to BNC Female F-Type Female to BNC Male BNC Female to F-Type Male F-Type Female to BNC Female F-Type Female to RCA Male RCA Female to F-Type Male RCA Female to F-Type Female RCA Female to ¼” Mono Male RCA Female to ¼” Mono Female RCA Male to ¼” Mono Female 3.5mm Mono Female to RCA Male 3.5mm Mono Male to RCA Female 3.5mm Stereo Female to 3.5mm Mono Male

PRICE $2.02 $1.30 $1.49 $2.18 $1.64 $2.27 $1.64 $1.64 $1.51 $1.22 $1.01 $2.10 $1.10 $0.67 $0.64 $0.63

KEY Q R S T U V W X Y Z AA AA BB CC DD EE

PART # 10-01099 10-01106 10-01100 10-01101 10-01104 10-01105 10-01107 10-01102 10-01121 10-01122 10-26054 10-26055 10-21538 10-21900 10-21904 10-21905

INTERSERIES ADAPTERS DESCRIPTION 3.5mm Stereo Female to 3.5mm Stereo Female 3.5mm Stereo Female to ¼” Stereo Male 3.5mm Stereo Male to 2x3.5mm Stereo Female 3.5mm Stereo Female to 2 x ¼” Stereo Female 3.5mm Stereo Male to ¼” Stereo Female 3.5mm Mono Female to ¼” Mono Male 3.5mm Mono Male to ¼” Mono Female ¼” Stereo Male to 2 x 3.5mm Stereo Female ¼” Stereo Male to 2 x RCA Female 3.5mm Stereo Male to 2xRCA Female ¼” Barrel Mono Female to Female ¼” Barrel Stereo Female to Female RCA Bulkhead Barrel 0.5”D RCA Barrel F/F RCA M/F/F RCA F/F/F

PRICE $1.30 $0.55 $0.76 $1.09 $0.50 $0.63 $0.50 $6.47 $1.51 $1.26 $2.10 $6.17 $5.80 $0.25 $1.68 $1.18

MILESTEK AUDIO CONNECTORS XLR Microphone Cables

3 Pin XLR and 1/4” Cable Connectors

XLR Male to Female - Pro Grade PART # 31-200-36 31-200-60 31-200-120 31-200-180 31-200-300 31-200-600 31-200-1200

SIZE 3 ft. 5 ft. 10 ft. 15 ft. 25 ft. 50 ft. 100 ft.

PRICE $22.30 $29.23 $37.13 $36.39 $64.43 $120.69 $221.34

XLR Male to Female - Economy PART # 31-101 36 31-101 60 31-101 120 31-101 180 31-101 300

SIZE 3 ft. 5 ft. 10 ft. 15 ft. 25 ft.

PRICE $11.51 $11.38 $13.10 $13.57 $16.80

XLR Wall Plates

XLR wall plates are made of stainless steel and contain rear solder-type Switchcraft connectors. PART # 60-03030 60-03031 33673-F

PART # 10-20512 10-20015 10-26016 10-26015 BELDEN-8412-F

DESCRIPTION MilesTek XLR Female 3-Conductor MilesTek XLR Male 3-Conductor MilesTek ¼” Male Stereo MilesTek ¼” Male Mono Audio Cable for XLR Plugs/Jacks (black reel)

PRICE $2.75 $2.50 $3.30 $1.22 $1.60 ft.

XLR Barrel Adapters

DESCRIPTION XLR Jack (D3F) Stainless XLR Dual Jk (D3F) Stainless Audio Cable, 2 Pair - 22 AWG, shielded stranded

For Expert Customer Service, Call Our Sales Team Today!

Nickel Housing and Contacts

PRICE $11.89 $18.96 $0.23

PART # DESCRIPTION 10-20949 MilesTek XLR M/M Barrel 3-Conductor 10-20948 MilesTek XLR F/F Barrel 3-Conductor

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $2.18 $2.75

COAXIAL

BNC Connectors & Adapters

BNC Crimp Plugs, 75 Ohm - Broadcast Digital Video

50 W vs. 75 W BNC

High frequency HDTV serial digital video. Three piece crimp plug with captive center contact. PART # CABLE TYPE 10-03001-204 RG59 20AWG, 1505A, 30 01003, 30 01004, 30 01005, 30 01006 10-03001-217 8218/VFM809, 1855A, 1856A 10-03001-215 RG179, 1520A, 1522A 10-03001-237 30 01031, 1694A, 1695A 10-03001-203 8281 10-03001-202 8241, RG59 23 AWG

CRIMP SLEEVE Hex 0.255

PRICE $3.15

Hex 0.178 Hex 0.178 Hex 0.324 Hex 0.324 Hex 0.255

$3.15 $3.15 $3.15 $3.15 $3.15

Traditional 50 W BNC connectors that are installed on 75W coaxial video cable cause digital signal distortion which results in digital transmission errors. The mechanical differences between the two types of connectors are the dielectric insulators and center pins. The 75W connector employs Teflon as a dielectric and air around its outer spring fingers as compared to Delrin surrounding the spring fingers of the 50W type. Also the 75W connector's center pin has the same diameter in the front and rear areas where the pin is crimped to the cable's center conductor; the 50W connector's pin has a larger diameter in the crimp area. Therefore, different crimp tools are required for two types of center pins. However, both types on connectors mate mechanically without physical damage. Nevertheless, the 50W connector is adequate for analog video applications.

Tech Note: (1) (2) (4) Use BNC Plug Key Chart below.

BNC Adapters

BNC Adapters are offered in 50 W and 75 W versions. The 50 W type is sufficient for analog video. Although designed for digital video, the 75 W type will also operate with analog video.

BNC Crimp Plugs, 50 Ohm - Analog Video, Ethernet

Traditional NTSC Baseband Analog Video

PART # 10-02001-202 10-02001-203 10-02001-233 10-02001-201

CABLE TYPE RG59/U (solid) 23 AWG 8241 8281 RG58A C/U, RG 223, 9907 RG58/U (solid), 8240

CRIMP SLEEVE Hex 0.255 Hex 0.324 Hex 0.213 Hex 0.213

PRICE $3.15 $3.15 $3.15 $3.15

Tech Note: (2) (3) (4) Use BNC Plug Key Chart below.

MILESTEK BNC ELECTRICAL SPECIFICATIONS: • Frequency Range: Tested to 3 GHz • Working Voltage: 500 VRMS • Dielectric Withstanding Voltage: 1500 VRMS • VSWR: 1.05 + 0.1f (GHz) DC to 1 GHz • Contact Resistance: Center Contact 1.5 milliohms, Outer Contact 1.0 milliohms • Insulation Resistance: 5000 megohms (min.) Tek Note: BNC Plug Key Chart (1) Use center pin crimper 40-15002 for all Milestek 75 W BNC plugs. (2) Use 40-11209 Corex Cable Stripper for specified cable types. (3) Use 0.068‰ die cavity & 40 12001 to crimp the center pin on all Milestek 50 W BNC plugs. (4) May be crimped with either 3/8‰ or 1/2‰ crimp die. Cable strip dimensions applies to ALL 75 W BNC plugs, 50 W BNC plugs. 0.327‰ (braid) • 0.146‰ (dielectric) • 0.158‰ (center conductor)

KEY PART # A 10-02904 10-02946 B 10-03946 C 10-02914 D 10-03914 E 10-03900 F 10-02947 G 10-03947 H 10-03908 I 10-01002 J 10-01066 K 10-02406-009 L 10-02406-010

BNC ADAPTERS DESCRIPTION 50 W BNC „T‰ F/M/F 50 W BNC „T‰ F/F/F 75 W BNC „T‰ F/F/F 50 W BNC Goal Post M/F/F 75 W BNC Goal Post M/F/F 75 W BNC Barrel F/F 50 W BNC Barrel M/M 75 W BNC Barrel M/M 75 W BNC Right Angle M/F Weco Male (.090) to BNC Female Mini-Weco Male to BNC Female BNC 50 W Terminator 1 % 0.5W Resistor BNC 75 W Terminator, 1% 0.5W Resistor Analog Applications M 10-03406-029 BNC 75 W Terminator, 0.1% 0.5W Resistor Digital Applications

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

M PRICE $4.20 $1.32 $6.37 $4.10 $4.20 $4.15 $1.26 $4.62 $8.40 $12.55 $16.75 $2.10 $2.63 $4.15

Stock Orders Shipped Same Day until 5 P.M. C.S.T

COAXIAL

BNC Tools MILESTEK BNC FAQS

Is the quality of MilesTek BNC's the same as other brands? Depending on the brand, MilesTek BNC's are equal to or exceed the quality of other competitors. For example, the MilesTek BNC plug bodies are machined from virgin brass in accordance with MIL-C39012 and then plated with bright nickel. Many other less expensive brands have cheaper die cast bodies. Furthermore, the MilesTek BNC body incorporates a beryllium copper wave washer to allow the BNC to flex during mating and to provide firm uninterruptible continuity of the shield signal. Teflon, the best dielectric, provides the proper dielectric for 75Ω impedance and securely holds the captive center pin.

More than 30 µ” is unnecessary for normal use. Some competitive brands have a 75Ω body with 50Ω center pin to eliminate the necessity of a separate center pin crimper. If tested, the connector with 50Ω pin and 75Ω body produces an impedance of approximately 68Ω .

Universal BNC Termination Kit

The 40-15002 precision tool crimps 75W BNC plug center pins. It has 4-way crimping dies per MS22520, full cycle ratchet, built-in pin locator and comfort grips.

How is your BNC center pin different than some other brands? In order to be true 75Ω impedance, the center pin has the same diameter in the crimp area as the mating area. Our captive BNC pins are plated with 30 µ” of gold in accordance with MIL-G-45204.

Should the BNC body have enclosed beryllium copper spring fingers? One manufacturer promotes this idea. Unless the BNC is subject to abuse such as thousands of matings and foreign objects poking into the interface of the connector, this design is unnecessary. What about cable pull strength? Pull strength is important on small diameter cables such as 735A. MilesTek BNC plugs have diamond knurling for maximum cable retention. Out of 3,000 to 4,000 coaxial cable assemblies, MilesTek's BNC's for 735A recorded pull test performance of 49.3 Ibs. The minimum specification is 30 Ibs.

75 Ohm Pin Crimpers

PART # DESCRIPTION 40-15002 For Digital Video BNCs 40-15005 For Telco BNCs PART # 40-50220

PRICE $236.25

Center Conductor Trimmer

The Center Conductor Trimmer automatically cuts the coaxial center conductor to the proper length for MilesTek BNC plugs.

• Universal crimper frame with RG58/59 and RG179/8281 crimp dies • Corex Cable stripper w/extra cassette • Center conductor trimmer • 75ohm pin crimper • Round cable cutter • BNC removal tool

PART # DESCRIPTION 40-15001 Center Conductor Trimmer

Corex II Coax Stripper

The Corex II Stripper prepares coax cables with diameters from 0.100” to 0.305” Includes four color-coded V-blocks for different cable sizes and hex wrench. The 3-blade black cassette with strip dimensions of 0.327/0.146 is specifically designed for MilesTek BNC plugs. PART # DESCRIPTION 40-11209 Corex (0.327/0.146) 40-11210 Corex Cassette (0.327/0.146)

PRICE $75.60 $26.25

MilesTek Universal Crimper

shown as 40-12100

For Expert Customer Service, Call Our Sales Team Today!

FRAME & DIE RG58/59/62 RG59/8281 RG179/8281

PRICE $8.95

Clothespin Stripper

The Clothespin Stripper (CP) prepares RG58, RG59 and RG6/8281. The cassette cutting dimensions are in parentheses. Specifically-designed for MilesTek BNC plugs. PART # DESCRIPTION 40-11310 CP 3-Bl. (0.327/0.146) 40-11311 CP 3-Bl. Cassette (0.327/0.146)

Use with MilesTek 3-piece BNC Crimp plugs. PART # 40-12100 40-12101 40-12115

PRICE $89.25 $99.75

PRICE $17.05 $5.25

Universal Crimper Die Sets PRICE $44.80 $38.07 $40.18

PART # 40-12002 40-12003 40-12015

DESCRIPTION RG58/59/62 Die Set: Hex size 0.255/0.213/0.068 RG59/8281 Die Set: Hex 0.324/0.255/0.068 RG179/8281 Die Set: Hex 0.324/0.178/0.068

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $18.06 $18.06 $18.06

COAXIAL

Coax Cable, F-Connectors

RG6 Dual Shield CATV

RG59 CCTV

CMR Rated • Spool Box PART # 30-01041-WHITE 30-01041-BLACK 30-01042-WHITE 30-01042-BLACK

AWG CONDUCTOR 18 CCS 18 CCS 18 CCS 18 CCS

COLOR White Black White Black

PUT-UP 1000 ft. 1000 ft. 500 ft. 500 ft.

CMR Rated • Spool Box

PRICE $112.88 $115.24 $63.00 $60.38

PART # 30-01046-WHITE 30-01046-BLACK

AWG CONDUCTOR 20 Solid BC 20 Solid BC

RG6 Quad Shield CATV

RG59 with Siamese Power 18/2 CCTV

CMR Rated • Spool Box

PART # 30-01043-WHITE 30-01043-BLACK

AWG CONDUCTOR 18 CCS 18 CCS

COLOR PUT-UP White 1000 ft. Black 1000 ft.

PUT-UP 1000 ft. 1000 ft.

PRICE $178.50 $181.13

PART # AWG/CONDUCTORS CONDUCTOR COLOR PUT-UP 30-01047-WHITE RG59 + 18/2 Solid BC White 500 ft. 30-01047-BLACK RG59 + 18/2 Solid BC Black 500 ft.

PRICE $141.75 $141.75

F-TYPE CONNECTORS

COLOR White Black

PRICE $194.25 $186.38

F-Type Connectors & Adapters KEY A A B B C D E F G H

PART # 10-16013-202 10-16013-224 10-16041-202 10-16041-224 10-16908 10-16935 10-16410-002 10-16049 10-16047 10-16044

DESCRIPTION F-Plug RG59 Crimp F-Plug RG6 Crimp F-Plug RG59 Universal Crimp F-Plug RG6 Universal Crimp F-Plug-Jack R/A Adapter F-Push-On Plug/F Jack F-Plug Terminator 75 W F-81 Bulkhead J/J w/Hardware F-81 Bulkhead J/J w/Hardware Single F Grounding Block

PRICE $0.47 $0.47 $0.92 $0.97 $1.03 $0.87 $0.21 $0.24 $0.90 $0.66

F-Type Cables

F-type cords have molded cable ends. Both cable and satellite can be run through RG6 F-type cords. Custom Cable lengths available.

RG59 CATV Cables

F-Type CATV Wallplates PART # 60-10801 60-06801 60-10802 60-06802

DESCRIPTION MilesTek Single F CATV Wallplate White MilesTek Single F CATV Wallplate Ivory MilesTek Dual F CATV Wallplate White MilesTek Dual F CATV Wallplate Ivory

Video RF Splitters KEY I J K L M N O

PART # 90-10112 90-10113 90-10114 90-10115 90-10116 90-10117 90-10118

DESCRIPTION 2-Way 5-900 MHz Gold 3-Way 5-900 MHz Gold 4-Way 5-900 MHz Gold 6-Way 5-900 MHz 8-Way 5-900 MHz 2-Way 2 GHz Satellite 4-Way 2 GHz Satellite

PRICE $3.36 $4.28 $4.75 $7.60 $8.32 $3.02 $8.48

PART # 33-100-36 33-100-72 33-100-144 33-100-300

PRICE $1.01 $1.01 $1.64 $1.64

M N

SIZE 3 ft. 6 ft. 12 ft. 25 ft.

RG6 CATV Cables

PRICE $1.85 $2.27 $3.33 $5.26

PART # 33-300-36 33-300-72 33-300-144 33-300-300

SIZE 3 ft. 6 ft. 12 ft. 25 ft.

PRICE $4.62 $2.73 $4.15 $7.27

CATV Crimper only

PRICE $76.51 $28.13

F-Plug Installation Kit

The F-plug installation kit has a crimper, 2-step coax cable stripper, round cable, flush cutter, two F-plug installation tools for RG59 and RG6, a blow molded case and instructions. CATV crimper frame/die terminates F-plugs for RG59 and PART # DESCRIPTION RG6 both regular and 40-50223 CATV Kit quad shield connectors. 40-12116

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T

COAXIAL

Compression Connectors F-Conn RG59 & RG6 Compression Connectors A full line of compression connectors specifically designed for ease of installation, the F-Conn system is the fastest way to terminate cable. Available for RG59 and RG6 cable, the new F-Conn universal connectors support both standard and quad-shield cable.

F-Conn Compression Tool for Compression Connectors

• Rugged, light weight: accommodates full-line of compression connectors

• Ratcheting handle doesn't release until connector is fully terminated

Connector Features and Benefits:

• 80-pound pull strength between connector and cable • Radial design provides 360 degree electrical continuity • Internal “O” sealing rings prevent moisture migration • Large ferrule surface insure’s proper RF and Digital interface

PART # 10-16020-202 10-16020-224 10-21002-240 10-21002-237 10-03100-240 10-03100-237

CONNECTORS (5 PACK) RG59 F RG6 F RG59 RCA RG6 RCA RG59 BNC RG6 BNC

PART # 10-16020-202-BP 10-16020-224-BP 10-21002-240-BP 10-21002-237-BP 10-03100-240-BP 10-03100-237-BP

MilesTek Coax Stripper for Compression Connectors (RG59, RG6, Mini RGB Coax)

PRICE $2.96 $3.15 $8.31 $8.68 $15.08 $15.08

100 PIECE BULK PACKS RG59 F RG6 F RG59 RCA RG6 RCA RG59 BNC RG6 BNC

PRICE $57.28 $61.25 $152.25 $159.25 $266.00 $276.50

• One Stripper does it all! • Perfectly strips RG59, RG6, Mini 23-26 AWG RGB Coax • Strips all appropriate cable types without changing out cartridge

MilesTek Basic Coax Stripper

for Compression Connectors (RG59, RG6 coax) Preset coaxial cable stripping tool - This stripper quickly and simply strips RG59 and RG6 coaxial cables for MilesTek compression type connectors. KEY A B C

PART# 40-40350 40-11412 40-40396

CONNECTOR F-Conn Compression Tool MilesTek Coax Stripper MilesTek Basic Coax Stripper

PRICE $131.72 $34.37 $25.76

HDMI over Single RG6/SDI Coax

Perfect for utilizing new or existing runs of RG6 CATV/broadband coax to upgrade analog video systems to fully digital platforms. Using a single RG6 coax, this device extends high definition HDMI 1.3 compliant devices up to 400 ft (120 M) and supports up to 1080P. Unique system allows signals from 2 input sources to transmit to 1 remote display. Cascade port is available on both transmitter and receiver, allowing signal expansion to multiple remote receivers. This starter kit package includes transmitter, receiver and remote control for switching between inputs. Additional receiver units, part # 90-12025, are sold separately. • Easy to install and simple to use. • Extends high definition HDMI compliant devices up to • Video amplifier speed: 10.2 Gbps. 400 ft. (120 m) over 75 Ohm RG6 Dual or Quad Shield • Video amplifier bandwidth: 340MHz. • Supports resolution up to 1080P. • Up to 36bit color depth. • Works with HDMI 1.3 and HDCP compliant devices. PART # DESCRIPTION • Consumer Electronics Control (CEC). 90-12024 HDMI over Single RG6 Coax • Supports xvYCC function. 90-12025 Receiver-Only for Cascading • Extends range of HDMI by equalizing signals.

For Expert Customer Service, Call Our Sales Team Today!

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $381.82 $210.00

RACKS & ACCESSORIES

Racks & Enclosures

SLIM 5 SERIES EQUIPMENT RACK ENCLOSURE Specify a Slim 5 when multiple racks need to be joined or when open sides are desirable. Ships ready-to-assemble to reduce shipping costs.

ENHANCED! top knockouts for fans

Structural Featuresv

• Available in 20” and 26” useable depths • Weight Capacity: • Static load capacity, 1,000 lbs. • UL Listed load capacity, 400 lbs. • Wide range of cabinet options makes rack adaptable to a multitude of different installation environments • Optional removable steel side panels provide security while attractive thermolaminate top and side panel options provide aesthetic appeal for ENHANCED! home and studio installations additional • Heavy-duty 14-gauge steel top and bottom contribute to cable tie points unsurpassed rigidity of rack design • Standard front and rear fixed 11-gauge, 10-32 threaded rackrail with marked rackspace increments to speed equipment mounting • Optional casters can be bolted directly to bottom of rack or concealed in skirted base • Unique mechanically interlocking corner joint is central to each unit’s exceptional strength and eases assembly • Bolt-together design allows for flat shipment via UPS • 2” and w” top and bottom electrical knockouts in rear of rack for cable pass-through • NEW top accepts two fans aesthetically pleasing silver • UL Listed in the US and Canada or black anodized trim panels available

unique mechanically interlocking corner joint provides superior strength

20‰ or 26‰ 191/8‰

5-29

Thermolaminate Side and Top Colors Available:

dark cherry shown with dark cherry side and top panels and plexiglass front door

granite gray

Zero Space Rackshelf

26” USEABLE DEPTH

MILESTEK PART #

MA PART #

50-70441

5-43

$375.19 50-70440

5-43-26

50-70442

5-37

$359.49 50-70437

5-37-26

50-70443

5-29

$342.64 50-70295

5-29-26

50-70444

5-21

$311.19 50-70435

5-21-26

50-70445

5-14

$276.36 50-70434

5-14-26

50-70446

5-8

$242.64 50-70438

5-8-26

PRICE

MILESTEK PART #

pepperstone (with slate sides)

Lacer Bars available for enhanced cable management. black

20” USEABLE DEPTH

light walnut

Steel Side Panel Colors Available:

26‰ deep Slim 5 shown with granite gray steel side panels

honey maple

MA PART #

PRICE

RACKING HEIGHT

$425.75 75¼” (43 space) $410.03 64¾” (37 space)

OVERALL WEIGHT HEIGHT CAPACITY 79‰

400 lbs.

68½‰

400 lbs.

$393.19 50¾” (29 space) $361.70 36¾” (21 space)

54½‰

400 lbs.

40½‰

400 lbs.

$326.90 24½” (14 space) (8 space) $294.39 14”

28¼‰

400 lbs.

17¾‰

400 lbs.

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PART# SH-5A

zero space full depth front and rear mount SH Series rackshelf

Stock Orders Shipped Same Day until 5 P.M. C.S.T

RACKS & ACCESSORIES

Racks & Enclosures casters add 37/8‰ to overall cabinet height

5W set of 4 commercial grade casters

5WR set of 4 fine floor casters

SLIM 5 SERIES EQUIPMENT RACK ENCLOSURE OPTIONS

5WL set of 4 commercial grade locking casters

5WLR set of 4 locking fine floor casters

CBS-5 skirted base with 4 commercial grade non-locking casters, fits 20‰ depth models; CBS-5-26 fits 26‰ depth models

CBS-5R skirted base with 4 fine floor non-locking casters, fits 20‰ depth models; CBS-5-26R fits 26‰ depth models

Door Options, Side Panels, Rear Access Pans, Rear Rackrail

RACK PART # 5-43 5-37 5-29 5-21 5-14 5-8 5-43-26 5-37-26 5-29-26 5-21-26 5-14-26 5-8-26

SOLID FRONT DOOR DO-5-43 DO-5-37 DO-5-29 DO-5-21 DO-5-14 DO-5-8 DO-5-43 DO-5-37 DO-5-29 DO-5-21 DO-5-14 DO-5-8

PLEXI FRONT DOOR DOP-5-43 DOP-5-37 DOP-5-29 DOP-5-21 DOP-5-14 DOP-5-8 DOP-5-43 DOP-5-37 DOP-5-29 DOP-5-21 DOP-5-14 DOP-5-8

STEEL SIDE PANELS, PAIR SP-5-43 SP-5-37 SP-5-29 SP-5-21 SP-5-14 SP-5-8 SP-5-43-26• SP-5-37-26• SP-5-29-26• SP-5-21-26• SP-5-14-26• SP-5-8-26•

TOP AND SIDE PANELS** TSP-5-43xx TSP-5-37xx TSP-5-29xx TSP-5-21xx TSP-5-14xx – TSP-5-43-26xx TSP-5-37-26xx TSP-5-29-26xx TSP-5-21-26xx TSP-5-14-26xx –

REAR ACCESS PANEL RAP43 RAP37 RAP29 RAP21 RAP14 RAP8 RAP43 RAP37 RAP29 RAP21 RAP14 RAP8

ADJUSTABLE “SPLIT” REAR RACKRAIL 5AR43 5AR37 5AR29 5AR21 5AR14 5AR8 5AR43-26 5AR37-26 5AR29-26 5AR21-26 5AR14-26 5AR8-26

CABLE CHASE 3”WIDE* 5CC43 5CC37 5CC29 5CC21 5CC14 5CC8 5CC43-26 5CC37-26 5CC29-26 5CC21-26 5CC14-26 5CC8-26

•Suffix part number with GY for granite gray finish. *Custom width cable chases available, please call for details. **Replace ÂxxÊ with DC=Dark Cherry, MP=Maple, LW=Light Walnut or PS=Pepperstone top (slate sides)

POWER DISTRIBUTION AND LIGHTING

vertical and rackmount power and lighting available, please see pgs. 64-79

TRIM PANELS

ADJUSTABLE “SPLIT” REAR RACKRAIL

PART # FINISH 5-CAVTRIM silver brushed and anodized 5-BAVTRIM black brushed and anodized

• Facilitates rear hanging of equipment Permits panels to be „mid-mounted‰ • All brackets, rails and hardware included • Cable chase kit required when using this option with ganged enclosures • Works with steel side panels only; will not accommodate wood side panels

top and bottom trim panels available to match the finish of the products mounted within the enclosure, includes 2 pieces

5AR37 installed on 5-37

Installation and Ordering Notes

Top and side panels are constructed from thermolaminated MDF. Will not work when using split rear rackrail options.

Removable Steel Side Panels are vented top and bottom with recessed lift handles and internal locking clips. Made from 18-gauge steel and finished in a durable black textured powder coat, each side panel adds s‰ per side to overall enclosure width. Side panels for 26‰ deep Slim 5 also available with granite gray finish.

WUSS and SH Series shelves need to be installed prior to installation of wood side panels, which conveniently lift off.

Dimensions

Runner Kit

Cable Chase Top View

3.00‰

For Expert Customer Service, Call Our Sales Team Today!

custom widths available

Doors are capable of being installed with a right or left swing and are equipped with a cam keylock and attractive flush handle.

Rear access pans feature a unique no-hinge „tip-out lift-off‰ design with a laser knockout for cable pass-through on the bottom.

Requires the use of a cable chase when used in multi-bay installations. Doors provide 12‰ clearance.

Securing keylock included.

Trim Strips low-friction runner allows the Slim 5 to easily slide in and out of credenzas and lecterns

PART #

FITS

5-RS20 5-RS26

20‰ deep models 26‰ deep models

add the finishing touch to any installation

without trim strip installed

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

with trim strip installed

RACKS & ACCESSORIES

Racks & Enclosures

ERK SERIES STAND-ALONE/GANGABLE RACK ENCLOSURES Aggressively Priced Stand-Alone Rack with Ganging Capabilities configurable open top on 44, 40 and 35 space models

Specify an ERK when economy is required and solid sides are preferable. Provides unparalleled quality at an aggressive price.

Structural Features • Fully welded construction, combined with 16-gauge steel tops, bottoms, and sides, provides a 2,500 lb. weight capacity • Standard front adjustable 11-gauge, 10-32 threaded rackrail with numbered rackspace increments to speed equipment mounting • Finished in a durable black textured powder coat

standard solid rear doors are configurable for enhanced thermal management, (27 to 44 space ERKs only)

Thermal Management • Front and side ventilation locations optimize convection • Configurable open tops on all 44, 40 and 35 space ERKs accept a number of options for thermal management while 27, 21 and 18 space models feature a solid top with 2 laser knockouts that accept 4-1/2" fans • Standard solid rear doors are configurable and accept a number of options for thermal management

fully adjustable front rackrail standard locking rear door incorporates spring loaded latch to keep door closed without key

Cable Management • 1/2”, 3/4”, 1”and 1-1/2” electrical knockouts found on removable split rear plates, top knockout plate additionally includes UHF/VHF antenna knockouts • Multiple lacing points and slotted rail brackets add cable management convenience to ERKs • Removable split rear plates allow cable bundles to be easily passed over or under the ERK’s standard key-locking rear door

rail brackets are prepunched for built-in cable management

Code Compliancy • Seismic Certified to the 1997 UBC and 2001 CBC Seismic Zone 4 and the 2000 IBC, 2003 IBC, 2002 ASCE Standard 7 and 2003 NFPA 5000 Seismic Use Group III lateral force requirements for protecting 600 lbs. of essential equipment in upper floor installations when used with optional ERK-Z4 seismic floor anchor brackets (see pg. 32) with an Ip value of 1.5 ganging holes (laser knockouts) • Stud in the base of rack facilitates proper 20‰ or grounding and bonding of electronic 25‰ equipment, as per NEBS and NEC standards • UL Listed in the US and Canada

numbered rackspace increments speed equipment mounting

22‰

ERKs feature 4‰ laser EKOs on sides, providing cable pass-through and ganging holes, allowing the ERK to be used in a multi-bay configuration without drilling (44, 40, 35 space models only), use GK4 4‰ ganging grommet kit to protect cables

20” OUTSIDE DEPTH (18 15/32” USEABLE) MILESTEK MA PART # PART #

PRICE

ERK-4425

25” OUTSIDE DEPTH (23 15/32” USEABLE) MILESTEK MA PART # PART #

PRICE

RACKING HEIGHT

OVERALL HEIGHT

50-70554-44

ERK-4420* $681.32 50-70354-44

ERK-4425*

$736.92 77‰

(44 space)

81 1/8‰

50-70554-40

ERK-4020* $642.55 50-70354-40

ERK-4025*

$676.97 70‰

(40 space)

74 1/8‰

50-70554-35

ERK-3520* $572.91 50-70354-35

ERK-3525*

$638.16 61 ¼‰(35 space)

65 3/8‰

50-70554-27

ERK-2720* $525.71 50-70354-27

ERK-2725*

$570.50 47 ½‰ (27 space)

51 3/8‰

50-70554-21

ERK-2120* $494.53 50-70354-21

ERK-2125*

$541.38 36 ¾‰(21 space)

40 7/8‰

50-70554-18

ERK-1820* $465.10 50-70354-18

ERK-1825*

$512.26 31 ½‰ (18 space)

35 5/8‰

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

AXS slide out system is compatible in ERK rack.

*available without rear door, suffix part # with ÂLRDÊ.

Stock Orders Shipped Same Day until 5 P.M. C.S.T

RACKS & ACCESSORIES

Racks & Enclosures

ERK SERIES STAND-ALONE/GANGABLE RACK ENCLOSURE OPTIONS Top Options (44, 40, 35 space models) 2 standard ball bearing fans ERK-ST solid

optional thermostatic fan control

ERK-VT vented

ERK-10FT mounts one 10‰ fan NEW ERK-10FT-550CFM with fan ERK-10FT-FC accommodates with fan + control deeper DVRs

ERK-6FT mounts two 6‰ fans NEW ERK-6FT 440CFM with fans

ERK-4FT mounts three 42‰ fans NEW ERK-4FT-285CFM with fans ERK-4QFT-FC with quiet fans + control

Door Options vented rear door, for ERKs ordered without rear door

FRONT DOORS

REAR DOOR

RACK PART #

SOLID

PLEXI

REGULAR PERF VENTED

LARGE PERF VENTED

PLEXI VENTED

VENTED

ERK-44xx ERK-40xx ERK-35xx ERK-27xx ERK-21xx ERK-18xx

FD-44 FD-40 FD-35 FD-27 FD-21 FD-18

PFD-44 PFD-40 PFD-35 PFD-27 PFD-21 PFD-18

VFD-44 VFD-40 VFD-35 VFD-27 VFD-21 VFD-18

LVFD-44 LVFD-40 LVFD-35 – LVFD-21 LVFD-18

PVFD-44 – – – – –

ERK-VRD-44 ERK-VRD-40 ERK-VRD-35 ERK-VRD-27 ERK-VRD-21 ERK-VRD-18

POWER DISTRIBUTION & LIGHTING

VERTICAL LACER STRIPS

vertical and rackmount power and lighting available please see pgs. 94-107

LACE-44LP 44 space 32‰ wide lacer strip, sold in pack of 6

ADDITIONAL RAIL, CASTER BASES

LACE-P 45 space 2‰ wide lacer strip, sold in packs of 6 see pg. 91

LACE-40-OP 40 space 34‰ wide lacer strip, sold in packs of 6

RACK ADD’L 10-32 COMMERCIAL GRADE PART # THREADED RACKRAIL CASTER BASES ERK-4420 ERK-RR44 CBS-ERK-20 ERK-4020 ERK-RR40 CBS-ERK-20 ERK-3520 ERK-RR35 CBS-ERK-20 ERK-2720 ERK-RR27 CBS-ERK-20 ERK-2120 ERK-RR21 CBS-ERK-20 ERK-1820 ERK-RR18 CBS-ERK-20 ERK-4425 ERK-RR44 CBS-ERK-25 ERK-4025 ERK-RR40 CBS-ERK-25 ERK-3525 ERK-RR35 CBS-ERK-25 ERK-2725 ERK-RR27 CBS-ERK-25 ERK-2125 ERK-RR21 CBS-ERK-25 ERK-1825 ERK-RR18 CBS-ERK-25

BB-40 40 space 2‰ wide copper buss bar

700 lb. weight capacity

FINE FLOOR CASTER BASE CBS-ERK-20R CBS-ERK-20R CBS-ERK-20R CBS-ERK-20R CBS-ERK-20R CBS-ERK-20R CBS-ERK-25R CBS-ERK-25R CBS-ERK-25R CBS-ERK-25R CBS-ERK-25R CBS-ERK-25R

Fan Kit w/ 2 fans, 190 CFM

Vent Panel Kit

KO-AWFP2

KO-VT3

Filter Kit

Blank Panel Kit

KO-FILTER3 KO-WSB3

standard solid rear doors are configurable for enhanced thermal management

ELECTRICAL ISOLATION KNOCKOUT PANEL

ISO-KOP top or bottom mount Electrical Isolation Knockout Panel features non-conductive EKOs to isolate electrical conduit from the rack, see pg. 33

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

BB-44-1 44 space 1‰ wide copper buss bar

GROMMETS

REAR DOOR KNOCKOUT PANEL OPTIONS 1,300 lb. weight capacity

For Expert Customer Service, Call Our Sales Team Today!

COPPER BUSS BARS

GK-4G GK4

NEW GK-4G gland grommet. Hugs cables to reduce dust and control airflow within an enclosure,sold in packs of 4. Standard GK4 ganging grommet also available.

VENT BLOCKER

VBK vent blockers available for Active thermal management, see pg. 115

RACKS & ACCESSORIES

Wall Mount Cabinets

WRP/WRS Series Low-Profile Wall Cabinets Specify a WRP or WRS when vertically wall mounting deep eqiupment

Structural Features • Unique design with 23” useable racking depth allows mounting of deeper equipment vertically in a parallel-to-the-wall orientation for space efficiency and aesthetics • Standard adjustable 11-gauge, 10-32 threaded rackrail • Solid hinged body swings either left or right • Angled, hinged plexiglass (WRP Series) or solid steel (WRS Series) top cover allows convenient equipment access • Top cover keyed separately from body keylock, providing user access to equipment controls while limiting access to rear equipment connections • Finished in a durable putty powder coat (WRP Series) or black textured powder coat (WRS Series) powder coat Thermal Management • Vented front and two bottom located fan mounting positions facilitate thermal management Cable Management • Rackrail adjusts to provide a space from 1” to 4” between top cover and equipment faces, allowing abundant room for D-Ring cable managers Code Compliancy • Grounding/bonding stud facilitates the proper grounding and bonding of electronic equipment, as per NEBS and NEC standards • UL Listed in the US and Canada BLACK PRICE PART # 50-70191 $364.95 50-70192 $378.56 50-70193 $427.06

PUTTY PART # WRP-4 WRP-6 WRP-8

RACKING HEIGHT $403.76 7‰ (4 space) $417.38 101/2‰(6 space) $456.19 14‰ (8 space) PRICE

USEABLE DEPTH 23‰ 23‰ 23‰

WEIGHT CAPACITY 150 lbs. 150 lbs. 150 lbs.

locking hinged plexiglass top cover

adjustable rackrail provides ample room for D-Ring cable managers

locking hinged body

accepts two 41/2” fans (not included)

WRP-6 unique vertical racking provides a generous 23‰ useable depth vented for cooling 25 1/4”

WRP-6

281/2”

WRS-6 shown with top cover open

A&E SPEC. # 96-068 laser knockout and electrical knockouts in backpan

SBX Series Wall Mount Cabinet Specify a WRP or WRS when vertically wall mounting deep eqiupment Structural Features • Removable backpan simplifies installation and provides easy access to equipment connections • Fully welded center section utilizes 18-gauge steel, backpan constructed from 14-gauge steel • Locking front door swings open a full 180º on a virtually indestructible hinge for rugged security and unobtrusive accessibility • Deep rail-to-door clearance ratio provides flexibility not found in flush-mount door designs • Standard 11-gauge, 10-32 threaded rackrail with marked rackspace increments to speed equipment mounting Thermal Management • Ventilation slots at top & bottom of each side promote passive thermal management Cable Management • 2” and w” electrical knockouts at top, bottom and rear facilitate cable entry PART # 50-70190 50-70381

RACKING HEIGHT 12 1/4‰ (7 space) 17 1/2‰ (10 space)

USEABLE DEPTH 14 3/4‰ 14 3/4‰

WEIGHT CAPACITY 75 lbs. 100 lbs.

electrical knockouts in top and bottom

removable backpan pre-mounts for easier installation 1 7” includes door!

SBX-10 rack is easily fastened to backpan with included security screws and driver bit

PRICE $263.97 $370.72

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T

RACKS & ACCESSORIES

Wall Mount Racks

PIVOTING PANEL MOUNT, HINGED PANEL MOUNT AND WALL MOUNT OPEN FRAME RACK Pivoting Panel Mount

The logical choice for wall mounting patch panels and network equipment, pivoting panel mounts are offered in 6”, 12”, and 18” depths and provide easy rear access. Innovative design with 90º positive stop facilitates punching down while fully open. Featuring abundant tie points for cable management, hook and loop cable fasteners and rugged steel construction, each unit is finished in a durable black powder coat.

TIA/EIA COMPLIANT

50-41014 50-41014

Hinged panel mounts feature holes to allow mounting directly to rackrail of any open frame rack

50-41019

PART # 50-70565 50-70566 50-70567 50-41003 50-41004 50-41005

OVERALL HEIGHT 5 ¾‰ 9 ¼‰ 12 ¾‰ 12 ¾‰ 16 ¼‰ 16¼‰

RACKING HEIGHT 3 ½‰ (2 space) 7‰ (4 space) 10 ½‰ (6 space) 10 ½‰ (6 space) 14‰ (8 space) 14‰ (8 space)

DEPTH 6‰ 6‰ 6‰ 12‰ 12‰ 18‰

WEIGHT CAPACITY 20 lbs. 20 lbs. 30 lbs. 40 lbs. 60 lbs. 60 lbs.

Hinged Panel Mount

Our HPM Series provides simple and straightforward wall mounting of rackmount components and can also be rackmounted to any 19” open frame rack. Hinged to provide rear access to mounted components, each of the 1, 2, 4, and 6 space units are 6” deep. Features abundant tie points for internal cable management, hook and loop fasteners, a smooth cutout in rear for cable pull-through and heavy-duty threaded rackrail. New Adjustable Depth HPM Series available. One side hinged at two points for easy rear access. Simple adjustable depth accommodates components from 9" - 15". Available in 4, 6 or 8 rackspace models. Built-in cable management.

50-70576

Adjustable depth HPM from 9‰ to 15‰ Rackspaces: 4, 6, or 8 VPM Versatile solution to wall mount racking.

New Vertical Panel Mount Series is a cost effective, versatile solution to wall mount racking. Can accommodate all depths of equipment. Mounts horizontally or vertically allowing versatile component placement. Available in 2, 3 or 4 rackspace models. 200 lb. weight capacity

Standard HPM Series

PART #

RACKING HEIGHT

50-41014 50-41001 50-41009 50-41015

1¾‰

(1 space)

3½‰ (2 space) 7‰ (4 space) 10½‰ (6 space)

50-70576 top dust cover acts as an equipment shelf

PRICE $31.43 $42.46 $51.70 $60.69 $30.12

Adjustable HPM Series

PART #

DESCRIPTION

50-41020 4 space, adjustable depth 9" - 15" 50-41021 6 space, adjustable depth 9" - 15" 50-41022 8 space, adjustable depth 9" - 15"

VPM Series

PART #

DESCRIPTION

50-41025 2 rackspace, vertical panel mount 50-41026 3 rackspace, vertical panel mount 50-70135 shown with HCM-2D horizontal cable manager fixed design prevents kinking or breaking of fiber-optics Includes rack screws

TIA/EIA COMPLIANT

For Expert Customer Service, Call Our Sales Team Today!

PRICE $74.17 $85.38 $92.16 $152.80 $163.99 $188.71

50-41027 4 rackspace, vertical panel mount

PRICE $97.35 $103.64 $109.92 PRICE $70.91 $78.93 $86.86

Wall Mount Open Frame Rack

A self-squaring rack for mounting virtually any data or telecommunications component, the Wall Mount Open Frame Rack is quick and easy to assemble thanks to its self-aligning design. Rugged steel construction features 11-gauge, 10-32 threaded rackrail and a black textured powder coat finish. WM Series racks are offered in two depths (12” and 18”), with models in heights ranging from 17 ¾” to 56 ¼”. PART # 50-70568 50-70569 50-70570 50-70571 50-70135 50-70124

OVERALL HEIGHT 17¾‰ 30‰ 56¼‰ 17¾‰ 30‰ 56¼‰

RACKING HEIGHT 14‰ (8 space) 26¼‰ (15 space) 52½‰ (30 space) 14‰ (8 space) 26¼‰ (15 space) 52½‰ (30 space)

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

DEPTH 12‰ 12‰ 12‰ 18‰ 18‰ 18‰

WEIGHT CAPACITY 200 lbs. 200 lbs. 175 lbs. 150 lbs. 150 lbs. 125 lbs.

PRICE $145.15 $149.40 $175.06 $166.50 $181.42 $202.78

RACKS & ACCESSORIES

Swing Frame and 2-Post Racks

Swing Frame Rack

• Open-back design maximizes useable wall space • 90º opening with positive stop facilitates punching down of wires • Ships ready-to-assemble to reduce space needed for storage and transport • Unique, open swing frame design utilizes pivot points instead of hinges and can be inverted to allow opening from the left or the right. • Durable black powder coat finish • 50 rack screws included • Abundant tie points and cable pass-throughs ease cable management • Permanently lubricated bushings with a proprietary pivot prevent sag

PART # 50-41006 50-41029 50-70572 50-70573 50-41030 50-41031 50-41032 50-41033

OVERALL HEIGHT 27 1/4‰ 41 1/4‰ 27 1/4‰ 41 1/4‰ 50‰ 27 1/4‰ 41 1/4‰ 50‰

RACKING HEIGHT DEPTH 21‰ (12 space) 12‰ 35‰ (20 space) 12‰ 21‰ (12 space) 18‰ 35‰ (20 space) 18‰ 43 3/4‰ (25 space) 18‰ 21‰ (12 space) 24‰ 35‰ (20 space) 24‰ 43 3/4‰ (25 space) 24‰

WEIGHT CAPACITY 100 lbs. 100 lbs. 100 lbs. 100 lbs. 100 lbs. 100 lbs. 100 lbs. 100 lbs.

Steel 2-Post Relay Racks

PRICE $257.50 $235.13 $198.85 $252.70 $286.28 $239.81 $295.96 $332.94

All-steel 19" equipment racks with 11-gauge steel side channels are self-squaring to speed up rack assembly. Rails are tapped on front and rear flanges with 10/32" threads and are spaced 5/8" - 5/8" - 1/2". Base has approximately 20" x 16" footprint and two assemblies. Two angles form top brace. Black powder-coat finish. 50 rack screws are provided for mounting shelves and panels. Optional 18" deep cantilever support base (20" x 24" footprint) offers extra stability B for free-standing applications. No special tools required for A assembly. Hex wrenches supplied. The 84"H rack has 45 rack spaces and the 72"H has 38 spaces. • Self-aligning design speeds assembly • 1600 lb. weight capacity • 1/8" (11-gauge) steel channels for strength • Aluminum top angles for easy field-drilling • Stabilizer gussets on feet • Durable black powder coat finish • 50 rack screws included • Optional cantilever support base available • 10-32 threaded hardware available KEY A B

PART # 50-70118 50-70377 50-70119

DESCRIPTION Steel Rack 19" x 84"H Steel Rack 19" x 72"H Cantilever Support Base

PRICE $243.20 $229.32 $101.78

TIA/EIA COMPLIANT

Open position 90 degree opening with positive stop to facilitate punch-down

Aluminum 2-Post Relay Racks

• 1600 lb. weight capacity

• 3/16" extruded aluminum uprights are 12-24 threaded front and rear

• Heavy duty 1/4" aluminum base is 15" deep for stability and includes holes for securing to floor C

• Heavy duty 1/4" thick aluminum top angle provides extra stability for cable ladders • Easy-to-assemble design saves on freight

• Includes 25 qty 12-24 rack screws

• Attractive silver brushed aluminum or black powder coat finish

KEY C

PART # DESCRIPTION 50-70304 Black Aluminum Rack 19" x 84"H 50-99004 12-24 Rack Screws

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $189.44 $23.80

Stock Orders Shipped Same Day until 5 P.M. C.S.T

RACKS & ACCESSORIES

Drawers/Rackshelves/Power Strips Rackmount Utility Drawers

The rackmount 19" drawer has full-extension ball bearing slides, allowing maximum opening of 14", a face-mounted drawer pull, built-in catch to keep it closed and a convenient rear knock-out for cable runs. KEY

PART # 50-70389 A 50-70175 50-70176 50-70177 50-70178

DESCRIPTION 2-Space 3-Space 4-Space Keylock Latch

PRICE $118.70 $126.35 $145.58 $17.99 $13.51

Adjustable Telescoping Rackshelf • Adjusts between front and rear rails • 500# weight capacity • Vented, 1 rack space PART # 50-70815 50-70816

Customize your cabinets and racks to fit your system with our wide array of rackmount shelves and accessories. Shelves are constructed of 16-gauge steel and are finished with a durable black powder-coat finish.

Sliding Shelves/Tray/Drawer

KEY PART # DESCRIPTION B 50-70136 Heavy-Duty Sliding Shelf C 50-70198 Low-Profile Sliding Shelf

WEIGHT USEABLE CAPACITY DEPTH 50 lbs. 14 5/16‰ 35 lbs. 14‰

Computer/Monitor Power Cord

PRICE $0.77 $2.17 $2.85 $4.31 $1.66 $2.29 $3.02 $7.72

For Expert Customer Service, Call Our Sales Team Today!

I G

F G H I J

PART # 50-70160 50-70102 50-70120 50-70121 50-70187 50-70216

RACK USEABLE DESCRIPTION UNITS DEPTH 19" Solid Cantilever 1U 10 1/2‰ 19" Solid Cantilever 2U 14 1/2‰ 19" Vented Cantilever 3U 17 3/8‰ 19" Vented Center-Mount 2U 17 7/8‰ 19" Half Equipment Width 1U 9 1/2‰ Fixed Writing/Keyboard 2U 17 5/16‰

WEIGHT CAPACITY 35 lbs. 50 lbs. 60 lbs. 50 lbs. 25 lbs. 100 lbs.

PRICE $29.84 $37.82 $74.33 $74.17 $24.58 $99.86

APC Personal SurgeArrest

Cord is compatible with virtually all computers, monitors, printers, power strips and fax machines. SIZE 1 ft. 18 in. 2 ft. 3 ft. 6 ft. 10 ft. 15 ft. 25 ft.

PRICE $136.64 $92.30

KEY

POWER STRIPS

PART # 39-200-12 39-200-18 39-200-24 39-200-36 39-200-72 39-200-120 39-200-180 39-200-300

PRICE $110.55 $136.17

Heavy Duty Rackshelves

The heavy-duty sliding 19" shelf is made of 16-gauge steel. Occupying little more than one rack space, it latches in the open or closed position and has ball bearing shelf slides extending it to a 14" length. The 19" low-profile sliding shelf (1 space) extends 11" on 3/4" nylon roller slides, equipped with positive-stop lockouts. The 19" steel sliding rack tray (1 space) has ball bearing shelf slides. Its universal equipment fixing points allow attachment of a variety of equipment. The economy 19" rack drawer with face-mounted drawer pull is non-latching and non-locking. The one rack space drawer is made of steel, with ball bearing slides.

DESCRIPTION 16" - 26" 27" - 44"

Reliable surge protection for home or office computers and electronic equipment. • Lightning and power surge protection • Protection Working Indicator • $50,000 Lifetime Equipment Protection PART # AP-PER7

MODEL 7 Outlet

SURGE RATING (JOULES) 240

PRICE $23.18

Basic Power Strip 6-outlet power strip is UL/CSA-listed to UL 1363/UL1449, with 1-MOV 90 Joules basic surge protection. PART # PRICE Has 3’ power cord, integrated circuit 80-20105 $8.93 breaker and on/off rocker switch.

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

RACKS & ACCESSORIES RACK MOUNT POWER STRIPS

The 50-70432 rackmount power distribution unit is equipped with 8 rear outlets, and one front outlet. Standard equipment includes surge and spike protection, EMI filtering, and a 9' cord. A generous 9" depth offers easy access to the 15 amp rear panel outlets, which are solidly mounted on yokes to eliminate deflection. An illuminated combination power switch/ circuit breaker is located on the front panel. UL listed in the US and Canada. The 50-70726 rack mount power distribution unit with local and remote notification of surge suppression status is equipped with 8 rear outlets and one front outlet. Two front LED status indicators display the level of protection provided by the unit's 2 stage surge and spike suppression. The PD-915RV-RN provides notification of surge suppression status to any customer supplied monitoring device.

STAGE 1 STAGE 2 INDICATOR INDICATOR

STATUS

Full Protection

Off

Stage 1 Compromised Stage 2 Active

Off

Load Unprotected

Rack Power Strips front

rear

PART #

DESCRIPTION

PRICE

50-70432

9 Outlet, Single 15 Amp Circuit, Surge/Spike Protected Rackmount Power Distribution with 9' Cord, Black Power Coat Finish

$102.85

front

rear

50-70726 PART # 50-70726

DESCRIPTION 9 Outlet, Single 15 Amp Circuit, Surge/Spike Protected Rackmount Power Distribution with 2 Stage Surge Suppression and Notification

PRICE $160.62

MULTI-MOUNT RACK MOUNT POWER STRIPS

Designed to optimize space and efficiency in power management, the new single circuit, 15 Amp rackmount power distribution system provides up to 20 outlets within a shallow depth. • Versatile design allows for the unit to be mounted either horizontally or vertically in the rack • Shallow 4" depth • Up 20 total outlets, front and rear • 9’, 14 gauge SignalSafe™ power cord minimizes the effects of AC magnetic fields • Reversible, adjustable mounting ears provide more flexible installation options with either 0º or 90º mounting • Outlets are oriented in various directions to accommodate plugs of different shapes, sizes and orientations. When installed with 90º orientation, the unit supports heavy "wall wart" power supply plugs. Sequenced models also feature: • Three channels of sequencing (two outlets per channel, 6 total) • Local or remote control • Adjustable sequencing delays up to 6 seconds • LED power indication Surge protected models also feature: • Two stages of protection, with remote status notification • LED status indicators

50-70723

50-70724

front rear

50-70725 PART # 50-70723 50-70724

50-70725

DESCRIPTION 20 Outlet, Single 15 Amp Circuit, Multi-Mount Power Distribution, 9Ê cord, 4‰ deep, Black Power Coat Finish 20 Outlet, Single 15 Amp Circuit, Multi-Mount Power Distribution, 9Ê cord, 4‰ deep, 10 Switched Outlets, Black Power Coat Finish 18 Outlet, Single 15 Amp Circuit, Multi-Mount Power Distribution, 9Ê cord, 4‰ deep, 2-Stage Surge/Spike, Remote Notify, Black Power Coat Finish

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $81.74 $100.53

$120.33

Stock Orders Shipped Same Day until 5 P.M. C.S.T

RACKS & ACCESSORIES

Rack Cable Management Horizontal Cable Managers

Organize patch cords and maintain a required bend radius. Available in a wide variety of styles to suit any application. The D-Ring provides a creative solution for adding individual D-Rings to a rack or on a wall using appropriate fasteners. For optimal performance, do not exceed a 50% fill rate when passing cables through cable rings. Constructed from 16-gauge steel, and finished in a durable black powder coat. B

KEY A B C D E F G H I J K L

E PART # 50-70376 50-70114 50-70374 50-70117 50-70375 50-70115 50-70132 50-70133 50-70109 50-70131 50-70130 50-70129

DESCRIPTION 1 ¾" (1 space) “Micro-Clip” Style 1¾" (1 space) “Micro-Clip” Style, with End Rings 1 ¾" (1 space) “D-Ring” Style 1 ¾" (1 space) “D-Ring” Style, with End Rings 3 ½" (2 space) “D-Ring” Style 3 ½" (2 space) “D-Ring” Style, with End Rings 1 ¾" (1 space) “D-Ring”, Front and Rear 3 ½" (2 space) “D-Ring”, Front and Rear 1¾" (1 space) “Micro-Clip” Style, with End Rings Wall-mount/Rackmount “D-Ring” D-Ring 2 5/16” w x 6”h D-Ring 2 5/16” w x 3 7/8” h

PRICE $26.29 $35.46 $32.85 $35.46 $35.46 $38.10 $40.74 $43.37 $34.07 $10.57 $9.28 $10.08

KEY M N O P Q R S

K L

PART # 50-70153 50-70184 50-70185 50-70186 50-70183 50-70155 50-70156

DESCRIPTION 1-Space (1¾‰) Single Sided Slot Duct, 2‰ Deep Access Panel 2-Space Access Panel 4-Space Access Panel 6-Space Filter Panel 3-Space Single Sided Center Slot Duct - 35‰ long Single Sided End Slot Duct - 35‰ long

PRICE $40.87 $31.21 $36.91 $44.75 $31.63 $60.25 $58.80

Rack Fasteners V

KEY V W X Y Z

W PART # 50-99002 50-99008 50-99009 50-99005 50-99006

DESCRIPTION Phillips Head 3/4" Screw 100 pack (10/32") Six Lobe Screw 50 pack Six Lobe Driver bit Square Head Screw100 pack (10/32") Square Head Driver Bit

Horizontal Lacer Bars

• Economical & effective for cable management • 5 styles for any application • Finished in durable black powder coat A

PRICE $15.73 $15.14 $12.71 $25.64 $3.17

B C D E

Black powder finish Flanged Blank Panels

PART # 50-70110 50-70111 50-70112

RACK SPACES 1 2 3

PRICE $7.02 $9.50 $12.97

For Expert Customer Service, Call Our Sales Team Today!

PART # 50-70174 50-70577

RACK SPACES 4 5

PRICE $16.26 $20.23

KEY A B C D E

PART # 50-70584 50-70583 50-70126 50-70127 50-70211

DESCRIPTION 4" Offset Round Rod 1.5" Offset Round Rod Round Rod Rectangular Bar „L‰ Bar

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRICE $7.81 $7.01 $4.99 $5.21 $3.34

RACKS & ACCESSORIES E

LADDER RACKS H

Ladder Racks D

P O G

B C

Rack mounting plate accommodates most cable ladders and includes mounting hardware and J-bolts as shown above. Typical application is shown below.

Call MilesTek for 18‰ and 24‰ wide ladder rack options.

KEY A A B C D E F G H I J K L M N O P

PART NO. 50-70324 50-71325 50-70326 50-70328 50-70340 50-70332 50-70330 50-70342 50-70344 50-70346 50-70334 50-70336 50-70338 50-70347 50-70350 50-70349 50-70516

DESCRIPTION Ladder Rack 6'L x 12" W Ladder Rack 10'L x 12" W Outside Radius Runway Inside Radius Runway Triangular Support Bracket Wall Angle Bracket Rack Mounting Plate Cable Retaining Post Threaded Ceiling Kit 5/8" x 6' Threaded Rod Vertical Wall Bracket (Pair) Junction Splice Kit (Pair) Butt Splice Kit (Pair) Foot Kit (Pair) J-Bolt Kit (Pair) Protective End Cap (Pair) 90 Degree Corner Radius

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

COLOR Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black

PRICE $67.00 $112.26 $102.45 $95.95 $40.44 $27.45 $42.70 $35.49 $21.32 $38.47 $17.74 $9.51 $8.87 $27.88 $4.53 $6.74 $116.27

Stock Orders Shipped Same Day until 5 P.M. C.S.T

Surface Raceway

CABLE MANAGEMENT

SURFACE RACEWAY SYSTEM

Surface raceway, fittings and junction boxes are made of 94V-0 PVC and come in 6 ft. and 8 ft. lengths and three widths, ¾”, 1¼” and 1¾”. Ideal for low-voltage UTP and coaxial wire, surface raceway system is a one-piece latching duct designed to contain, route and protect wire and cable when not feasible to run it within the wall. One-piece design cable duct has a flexible hinge, allowing numerous openings without discoloration or stress cracking. Self-locking, hidden positive latch allows quick re-entry and secure cable installation.

*62.5/125/900 PVC OFNR CABLE/WIRE TYPE ¾” WIDE 1¼” WIDE 1 ¾”WIDE CAT5E UTP 4 Pair 2 7 14 CAT5E UTP 25 Pair 0 1 2 RG58/U 3 9 19 RG59/U & RG62/U 2 6 12 RG6/U 1 5 9 Fiber Optic 2 Strand* 4 11 23 Fiber Optic 4 Strand* 3 10 20 Fiber Optic 6 Strand* 2 8 16 Fiber Optic 8 Strand* 2 6 13 Fiber Optic 12 Strand* 2 5 11

Wide raceway base/boxes have foam-backed adhesive to assist in quick installation. Rubber-based adhesive is pressure-sensitive foam tape with high ultimate bond strength, conforming to most any surface. Sold in single pieces or economical 20-piece boxes. Minimum 1” bend radius fittings. 2” deep single-gang and 1½” deep double-gang junction boxes offered. Fittings for 1” minimum bend radius conform to EIA/TIA CAT5e/5 requirements. (+F$) = additional freight charges apply

6 5 7

For Expert Customer Service, Call Our Sales Team Today!

KEY 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 5 5 5 6 6 6 7 7 7 8 8 8 9 9 9 10 10 10 11 11 11 12 13

DESCRIPTION Raceway ¾‰w x ½‰h x 6Êl, 20 pcs/box (+F$) Raceway ¾‰w x ½‰h x 6Êl, 1 piece (+F$) Raceway ¾‰w x ½‰h x 8Êl, 20 pcs/box (+F$) Raceway ¾‰w x ½‰h x 8Êl, 1 piece (+F$) Raceway 1¼‰w x ¾‰h x 6Êl, 20 pcs/box (+F$) Raceway 1¼‰w x ¾‰h x 6Êl, 1 piece (+F$) Raceway 1¼‰w x ¾‰h x 8Êl, 20 pcs/box (+F$) Raceway 1¼‰w x ¾‰h x 8Êl, 1 piece (+F$) Raceway 1¾‰w x 1‰h x 6Êl, 20 pcs/box (+F$) Raceway 1¾‰w x 1‰h x 6Êl, 1 piece (+F$) Raceway 1¾‰w x 1‰h x 8Êl, 20 pcs/box (+F$) Raceway 1¾‰w x 1‰h x 8Êl, 1 piece (+F$) Ceiling Drop ¾‰ Ceiling Drop 1¼‰ Ceiling Drop 1¾‰ End Cap ¾¾‰ End Cap 1¼‰ End Cap 1¾‰ Splice Cover¾¾‰ Splice Cover 1¼‰ Splice Cover 1¾‰ Reducer 1¾‰ to 1¼‰ Reducer 1¾‰ to ¾‰ Reducer 1¼‰ to ¾‰ Internal Cover 1‰ min. bend radius ¾‰ Internal Cover 1‰ min. bend radius 1¼‰ Internal Cover 1‰ min. bend radius 1¾‰ Elbow Cover 1‰ min. bend radius¾1¾‰ Elbow Cover 1‰ min. bend radius 1¼‰ Elbow Cover 1‰ min. bend radius 1¾‰ External Cover 1‰ min. bend radius ¾‰ External Cover 1‰ min. bend radius 1¼‰ External Cover 1‰ min. bend radius 1¾‰ Tee Cover 1‰ min. bend radius ¾‰ Tee Cover 1‰ min. bend radius 1¼‰ Tee Cover 1‰ min. bend radius 1¾‰ Junction Box 2‰ Depth Junction Box Double Gang 1½‰ Depth

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

IVORY 60-20120 60-20121 60-20122 60-20123 60-20124 60-20125 60-20126 60-20127 60-20128 60-20129 60-20169 60-20170 60-20160 60-20161 60-20162 60-20133 60-20134 60-20135 60-20130 60-20131 60-20132 60-20163 60-20164 60-20165 60-20139 60-20140 60-20141 60-20151 60-20152 60-20153 60-20145 60-20146 60-20147 60-20157 60-20158 60-20159 60-20166 60-20167

WHITE 60-20220 60-20221 60-20222 60-20223 60-20224 60-20225 60-20226 60-20227 60-20228 60-20229 60-20269 60-20270 60-20260 60-20261 60-20262 60-20233 60-20234 60-20235 60-20230 60-20231 60-20232 60-20263 60-20264 60-20265 60-20239 60-20240 60-20241 60-20251 60-20252 60-20253 60-20245 60-20246 60-20247 60-20257 60-20258 60-20259 60-20266 60-20267

OFFICE WHITE 60-20320 60-20321 60-20322 60-20323 60-20324 60-20325 60-20326 60-20327 60-20328 60-20329 60-20369 60-20370 60-20360 60-20361 60-20362 60-20333 60-20334 60-20335 60-20330 60-20331 60-20332 60-20363 60-20364 60-20365 60-20339 60-20340 60-20341 60-20351 60-20352 60-20353 60-20345 60-20346 60-20347 60-20357 60-20358 60-20359 60-20366 60-20367

PRICE $140.03 $7.00 $186.70 $9.34 $199.75 $9.99 $266.33 $13.32 $286.24 $14.31 $381.66 $19.08 $2.26 $2.26 $2.26 $1.25 $1.39 $1.51 $1.25 $1.39 $1.51 $1.26 $1.32 $1.52 $1.40 $1.53 $1.66 $1.40 $1.53 $1.66 $2.53 $2.74 $2.93 $1.40 $1.53 $1.66 $5.49 $8.08

CABLE MANAGEMENT

Flexible Raceway

RESI-GARD® FLEXIBLE RACEWAY

Ideal for providing a main chase from the main distribution panel to a secondary hub in the attic or basement, Resi-Gard nonmetallic flexible raceway is available in ¾" to 2" diameter sizes with factory installed pull tape in sizes 1" to 2". The raceway is hand bendable, lightweight and easily cut to length to reduce scrap. Bright orange color clearly signifies a low voltage installation. PART # SIZE 70-80001 ¾‰ 70-80002 1‰ 70-80003 1¼‰ 70-80004 1½‰ 70-80005 2‰

COIL LENGTH 100 feet 100 feet 100 feet 50 feet 50 feet

PRICE $79.88 $103.23 $125.87 $74.57 $102.67

COUPLINGS AND TERMINAL ADAPTERS

Couplings for 1¼” to 2” Resi-Gard Raceway must be cemented using Resi-Gard Solvent Cement.

Resi-Gard® Standard Couplings PART # SIZE 70-80026 1¼‰ 70-80027 1½‰ 70-80028 2‰

PRICE $0.64 $0.85 $1.17

Resi-Gard® Conduit Clamps

Carlon’s orange conduit clamps are designed specifically for the installation of Resi-Gard Raceways. Sold in bags of 5.

Quick Connect Couplings and Adapters B

A C

Carlon one-piece quick connect couplings are designed for quick, easy installation. KEY A A B B C

PART # 70-80037 70-80038 70-80039 70-80040 70-80041

DESCRIPTION ¾" Snap-In Adapter 1" Snap-In Adapter ¾" Threaded Adapter 1" Threaded Adapter ¾" Coupling

PRICE $1.37 $2.06 $1.98 $2.98 $1.13

Low Voltage Open Backed Boxes

Designed with a hard shell thickness for increased durability. The Resi-Rings attached to the box allow you easy access to the cable while keeping it safely out of the way from other trades. KEY PART # DESCRIPTION D 70-80043 1-Gang Bracket 70-80046 2-Gang Bracket

PRICE $1.89 $2.51

Old Work Brackets E

Designed specifically for the installation of low-voltage devices in an existing wall. The backless box design accommodates the space and bend radius requirements of coaxial or data/communications cables. KEY PART # DESCRIPTION E 70-80044 Single 70-80047 Dual

PRICE $1.40 $2.79

PART # 70-80032 70-80033 70-80034 70-80035 70-80036

SIZE ¾‰ 1‰ 1¼‰ 1½‰ 2‰

PRICE $2.29 $3.82 $4.38 $4.49 $4.74

Low Voltage Add-On Bracket F

The Add-On Bracket can be added-on to just about any nonmetallic electrical box. Resi-Rings for cable or ¾” Resi-Gard raceway attachment. KEY PART # DESCRIPTION F 70-80045 Single Add-On Brackett

PRICE $1.89

Resi-Gard Solvent Cement

Resi-Gard Solvent Cement is ideal for easy, tight installation of all Resi-Gard flexible nonmetallic raceway, fittings and accessories. Available in pint sizes with convenient brush top applicator.

PART # 40-40408

PRICE $14.48

Mud Rings

A great alternative to metallic mud rings, this nonmetallic version is lighter in weight, has no sharp corners or edges and is offered in the distinctive orange color that signifies structured cabling components. The back is open to PART # PRICE accommodate appropriate 70-80048 $1.24 bend radiuses.

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T

CABLE MANAGEMENT

Ducting, Tubing, Cable Supports Slotted Ducting

Convoluted Tubing

Used for routing and protecting cable, slotted channel ducting is made from high-impact, rigid black PVC. The 3” wide ducting is available in 2” and 3” heights. The wiring duct covers provide a non-slip, plastic lining to ensure covers remain in place. The duct and cover are sold separately.

Organizes cables and wires into a neat path. Quick and easy installation is done by inserting wires through the split along the length of the polyethylene tubing. Longer lengths are also available.

PART # 70-50299 70-50300 70-50301

DESCRIPTION 3‰W x 2‰H x 6-ft. L Slotted Duct 3‰W x 3‰H x 6-ft. L Slotted Duct 3‰W x 6-ft. L Duct Cover

PRICE $36.34 $44.81 $13.27

PART # 70-50252 70-50253 70-50254

Wide Surface Cable Supports

These cable supports provide proper support of high-performance cabling, including CAT5e, higher speed copper and fiber-optic cables. The hangers’ extra-wide surfaces protect against cable bending, crimping and snagging. Two sizes accommodate up to 16 and 80 four-pair UTP cables. The 2” diameter loop wide-base J-hook can hold up to 80 4-pair UTP cables. The small bundle J-hook will hold up to 16 4-pair UTP cables. The smaller J-hook’s unique bend-back tab provides containment without pressure on cables. Both size J-hooks are made of spring steel. Basic cable hangers (1) and (5) may be nailed, screwed or bolted to surfaces or structures. The drop wire hangers (2) and (6) have a multi-function clip that attaches onto a vertical wire (#12 thru ¼”). The J-hooks for tee bars (3) and (7) snap onto acoustic grids. The cable hangers (4) and (8) are hammered onto beams. The cable cat pulley (9) allows easy pulling of wire, up to 25 four-pair cable. Since the pulley’s Jhook is the same as the Wide Base Basic J-hook 70-50214, the pulley may be permanently attached, or the pulley and pin assembly may be removed and used with another J-hook. KEY 1 2 3 4 5 6 7 8 9

PART # 70-50214 70-50215 70-50216 70-50217 70-50246 70-50423 70-50247 70-50248 70-50362

DESCRIPTION Wide Base Basic J-Hook Wide Base J-Hook Drop Wire Hanger Wide Base J-Hook Tee Bar Wide Base J-Hook Ham. Flange Sm. Bundle Basic J-Hook Cable Cat Pulley Sm. Bundle J-Hook Drop Wire Hanger Sm. Bundle J-Hook Tee Bar Sm. Bundle J-Hook Ham. Flange

For Expert Customer Service, Call Our Sales Team Today!

PRICE $3.12 $3.86 $7.23 $6.51 $1.48 $22.28 $2.35 $4.62 $4.18

DESCRIPTION ½‰ x 10Ê Black ¾‰ x 10Ê Black 1‰ x 10Ê Black

PRICE $2.48 $3.08 $3.52

13 9

10 11 12

17 18 19

Cable Rings & Spool KEY 10 11 12 13 14 15 16 17 18 19

PART # 70-50231 70-50232 70-50233 70-50235 70-50433 70-50424 70-50426 70-50455 70-50454 70-50456

DESCRIPTION Plastic Comp. D-Ring Plastic Comp. D-Ring Plastic Comp. D-Ring Distribution Plastic Spool Cable Hanger Bridle Ring 1/4‰ Thread Bridle Ring Screw Thread Aluminum D-Ring Aluminum D-Ring Aluminum D-Ring

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

SIZE 1 7/8‰ x 2 1/4‰ 3 1/8‰ x 3 1/4‰ 5 1/8‰ x 3 1/4‰ 3 1/4‰ x 2 1/4‰

3 1/8‰ x 3 1/4‰ 1 7/8‰ x 2 1/4‰ 5 1/8‰ x 3 1/4‰

PRICE $1.22 $1.53 $2.27 $1.12 $3.82 $1.35 $1.79 $2.77 $2.50 $3.42

CABLE MANAGEMENT

7 6 5 4 3

KEY 1 2 3 4 5 5 6 6 7 8

Cable Ties

PART NO. 70-50108 70-50257 70-50109 70-50258 70-50110 70-50404 70-50259 70-50405 70-50219 70-50298

DESCRIPTION Cable Tie Wrap Cable Tie Wrap Cable Tie Wrap Cable Tie Wrap Cable Tie Wrap Cable Tie Wrap Cable Tie Wrap Cable Tie Wrap Mount Tie Wrap Mount Tie Wrap

COLOR Natural Black Natural Black Natural Natural Black Black Natural Black

LENGTH WIDTH DIAMETER 4.00‰ 0.10‰ 0.75‰ 4.00‰ 0.10‰ 0.75‰ 6.00‰ 0.10‰ 1.25‰ 6.00‰ 0.10‰ 1.25‰ 8.00‰ 0.19‰ 2.00‰ 11.80‰ 0.19‰ 3.00‰ 8.00‰ 0.19‰ 2.00‰ 11.80‰ 0.19‰ 3.00‰ 8.00‰ 0.19‰ 2.00‰ 8.00‰ 0.19‰ 2.00‰

STRENGTH IN LBS. 18 18 18 18 50 50 50 50 50 50

QTY 100 100 100 100 100 100 100 100 100 100

PRICE $1.46 $1.88 $3.38 $3.54 $4.41 $7.25 $4.52 $7.37 $8.39 $9.00

2 1

High quality American made durable 6/6 natural nylon. The lowest insertion force with the highest tensile strength available.

One Wrap Lineal Reusable Cable Wraps

Velcro Wraps

Each roll is 25 lineal yards.

DESCRIPTION Cable Wrap

COLOR Black

LENGTH 30/BAG 70-50318 8‰

PRICE $17.22

PART NUMBER BY PACKAGING 100/BAG PRICE 900/ROLL 70-50329 $57.52 70-50340

DESCRIPTION Plenum Wrap Cable Wrap

COLOR Black Black

LENGTH 30/BAG 70-50466 8‰ 12‰ 70-50398

PRICE $16.98 $24.08

100/BAG n/a 70-50399

PRICE $266.32

PRICE $92.96

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PART # COLOR 70-50470 Black

PRICE $41.22

Stock Orders Shipped Same Day until 5 P.M. C.S.T

PRODUCT FEEDBACK

For Expert Customer Service, Call Our Sales Team Today!

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

PRODUCT INDEX NETWORKING

Leviton Decora Wall Plates and Inserts ...........................8

HDMI Over LAN/Ethernet Extender ...............................23

CAT5E Bulk Cable – PVC, Plenum ..................................3

Leviton QuickPort Single-Gang Wall Plates .....................9

HDMI Over Dual CAT5E/CAT6 Splitters.........................24

CAT6 Bulk Cable – PVC, Plenum.....................................3

Leviton Surface Mount Housing .......................................9

HDMI Over Dual CAT5E/CAT6 Matrix Switchers ...........24

Cross Connect Wire, Flat Silver Satin Cable....................3

Leviton Structured Media Centers, Modules ..................10

HDMI Over Single RG6/SDI Coax .................................25

MilesTek RJ45 and RJ11 Modular Plugs .........................3

HellermannTyton Jacks, Wall Plates, Panels..................11 Fiber Optic Patch Cords.................................................12 Fiber Optic Patch Cords.................................................12 Fiber Wall Mount and Rackmount Fiber Enclosures ......12

RJ45 Boots.......................................................................3

HDMI Over Single Fiber Optics......................................26

UTP Stripper and Crimper Tools ......................................3

HDMI Converters (USB, VGA, SDI, Component, Composite)..........................................27-30

EZ-RJ45 Plugs and Tools.................................................4 Uni-Network Tester...........................................................4

HDMI Wireless Extender................................................31

RJ45/RJ11 Modular Adapters/Couplers...........................4

Fiber Plug-In Adapter Modules ......................................12

VGA Cables ...................................................................32

Punch down Tools ............................................................4

10/100 Desktop Ethernet Switches................................13

VGA Decora-Style Wall Plates .......................................32

10/100 Rack Mount Ethernet Switches ..........................13

VGA Aluminum Wall Plates............................................33

10/100/1000 Gigabit Ethernet Switches.........................13

HD15/DB15 Gender Changes........................................33 VGA Splitters/Amplifiers.................................................34 VGA Switches and Matrix Switchers..............................35 VGA with Audio Over CAT5E/CAT6 Extenders .........36-37 VGA with Audio Over CAT5E/CAT6 Splitters..................38

CAT5E, CAT6, RJ11 Jacks...............................................5 RCA, HDMI, USB, 3.5, BNC, Fiber, Binding Post and F-type Jacks.......................................5 Plastic Insert Wall Plates..................................................6 Stainless Steel Insert Wall Plates ....................................6 Recessed Cable Plates....................................................6 Wall Plate Mounting Brackets ..........................................6

Fast Ethernet MM Converters ........................................13

Modular Multimedia Distribution Panels...........................6

Gigabit Ethernet Converters ..........................................13 USB Cables....................................................................14 USB Over CAT5E/CAT6 Extender Sets .........................14 USB 2.0 Over CAT5E/CAT6 Active Extender Sets.........15

AV Feed-Thru Wall Plates (HDMI, Component, VGA, Whole House Audio) ............................................39 Component Video (RGB) Cables ...................................39

AV DISTRIBUTION

3.5 mm Stereo Audio Patch Cords.................................40

HDMI Cables and Adapters ...........................................16

Stereo Audio/Video RCA Patch Cables .........................40 RG59 BNC and RCA Cables .........................................40

Surface Mount Jacks........................................................6

S-Video Cables ..............................................................40

CAT5E and CAT6 Patch Cords.........................................7

AV Quick-Connect Cabling System – VGA ....................41

CAT5E and CAT6 Patch Panels .......................................7 110 and Type-66 Wiring Blocks........................................7 Leviton CAT5E, CAT6, RJ11 Jacks ..................................8 Leviton CAT5E, CAT6 Patch Panels.................................8

HDMI Splitters and Switches..........................................17 HDMI Matrix Switches....................................................18 HDMI Over Dual CAT5E/CAT6 Extenders.................19-20 HDMI Over Single CAT5E/CAT6 Extenders..............21-22

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T

PRODUCT INDEX F-Type CATV Wall Plates ...............................................48

Power Strips...................................................................57

F-Type Cables ................................................................48

Rack Mount Power Strips...............................................58

Video RF Splitters ..........................................................48

Horizontal Cable Managers............................................58

RG59 & RG6 Compression Connectors ........................49

Horizontal Lacer Bars.....................................................58

Coax Strip and Compression Tools................................49

Rack Fasteners ..............................................................58 Flanged Blank Panels ....................................................58 Ladder Racks .................................................................60 CABLE MANAGEMENT HellermannTyton Surface Raceway System ..................61

AV Quick-Connect Cabling System – Component / Composite Video ..............................41-42 AV Quick-Connect Cabling System – DVI, HDMI...........43 AV Quick-Connect Integrated Wall Plates ......................44 Interseries Adapters – BNC, RCA, F, 3.5,1/4‰................45 XLR Microphone Cables ................................................45

Carlon In-Wall Raceway System/Accessories ...............62

XLR Wall Plates .............................................................45

Ducting, Tubing, Cable Supports....................................63

3 Pin XLR and 1/4‰ Cable Connectors ...........................45

Cable Ties ......................................................................64 RACKS & ACCESSORIES Slim 5 Series Racks.......................................................50 ERK Series Racks..........................................................52 Wall Mount Cabinets ......................................................54

COAXIAL BNC Crimp Plugs, 75 Ohm - Broadcast Digital..............46 BNC Crimp Plugs, 50 Ohm- Analog Video.....................46 BNC Adapters ................................................................46 BNC Termination Tools (Strippers, Crimpers) ................47

Pivoting Panel Mount .....................................................55

RG6 Dual/Quad Shield CATV Bulk Cable ......................48

Hinged Panel Mount.......................................................55

RG59 CCTV Bulk Cable.................................................48

Wall Mount Open Frame Rack .......................................55

F-Type Connectors & Adapters......................................48

Swing Frame Racks .......................................................56 2-Post Relay Racks........................................................56

Rackshelves and Drawers..............................................57 Computer/Monitor Power Cords.....................................57

For Expert Customer Service, Call Our Sales Team Today!

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

AS9100C / ISO CERTIFICATION

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T

CREDIT APPLICATION

CREDIT APPLICATION FAX TO: 940-898-1725

Milestek Corporation 1506 Interstate 35 W Denton, TX 76207

Contact Information

Billing Information

Contact Name

AP Contact Name

Company Name

Address

City

State

Zip

City

Phone

Fax

E-mail

State

Zip

General Company Information Federal Tax ID Number

Stock Symbol

Tax Exempt (If exempt, please attached exemption certificate) Legal Structure (check all that apply)

Corporation

In Business Since

Number of Employees

Taxable Partnership

Sole Proprietor

Business Type

D&B Number

Bank References Bank Name

Bank Acct #/ Type

Company Name

Bank Address

Bank City/State/Zip

Bank Contact

Bank Phone

Trade References Company/Contact

Address

City

State

Phone

Fax

1. 2. 3. 4.

Signature and Authorization The signature below represents and warrants that (a) the party siging below is an authorized representative of the company; and (b) that the information herein is a complete and accurate representation of the company's financial situation as of the date hereof. Any misrepresentation or fraudulent information provided will be the basis for default under this agreement. By Signing this form, I expressly authorize L-com Inc to contact the above references to determine credit worthiness. Signature

Date

Print Name

Business Title

For Expert Customer Service, Call Our Sales Team Today!

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

TERMS OF CONDITIONS The following are the terms and conditions ("Terms and Conditions") for the sale of products ("Products") by MilesTek Corp. ("MilesTek") to MilesTek's customers ("Customers"). PLEASE READ THIS AGREEMENT CAREFULLY. ANY DIFFERENT OR ADDITIONAL TERMS SET FORTH IN CUSTOMER'S PURCHASE ORDER OR SIMILAR COMMUNICATION ARE OBJECTED TO AND SHALL NOT BE BINDING ON THE COMPANY UNLESS A SEPARATE AGREEMENT HAS BEEN SIGNED BY AN AUTHORIZED OFFICER OF THE COMPANY. BY PLACING AN ORDER FOR PRODUCTS FROM THE COMPANY, OR BY ACCEPTING DELIVERY OF THE PRODUCTS DESCRIBED ON THE APPLICABLE PACKING SLIP, BILL OF LADING AND/OR INVOICE RECEIVED WITH THE PRODUCTS, YOU AGREE TO BE BOUND BY AND ACCEPT THESE TERMS AND CONDITIONS OF SALE. 1. ACCEPTANCE AND CANCELLATION OF ORDERS All orders are subject to acceptance by MilesTek in writing by a duly authorized agent of MilesTek; any written acknowledgement of receipt of an order shall not, in and of itself, constitute such acceptance. Orders accepted and processed by MilesTek may not be cancelled by Customer except as covered by the Limited Warranty. Non-Standard Parts are defined as Products which are special orders, custom orders, orders for non-standard products, products not customarily in stock or orders for value-added products. Non-standard products are Non-Cancelable and Non-Refundable and for these products, all sales are final. Cable Assemblies built-to-order in our facility are Non-Standard Products and are also Non-Cancelable/Non-Refundable („NC/NR‰). In the event of cancellation or other withdrawal of an order for any reason and without limiting any other remedy which MilesTek may have as a result of such cancellation or other withdrawal, reasonable cancellation or restocking charges, which shall include all expenses than incurred and commitments made by MilesTek, shall be paid by Customer to MilesTek. Customer requests to reschedule are subject to acceptance by MilesTek in its sole discretion. Orders may not be canceled or rescheduled after the order has been submitted by MilesTek to the shipment carrier. MilesTek reserves the right to allocate sales and limit quantities of selected Products among its customers in its sole discretion. Product specifications and availability are subject to change without prior notice. 2. PRICES Orders are billed at the prices (in US dollars) in effect at the time of shipment. Prices will be as specified by MilesTek and will be applicable for the period specified in MilesTek's quote. If no period is specified, quoted prices will be applicable for thirty (30) days. Most current pricing will be as displayed on the MilesTek website found at www.MilesTek.com, or any of itÊs affiliated websites (e.g. www.MilesTek1553.com, and others). The catalog reflects the latest pricing information available at the time of printing. Prices shown in the catalog are subject to change without notice. Prices are subject to increase in the event of an increase in MilesTek's costs or other circumstances beyond MilesTek's reasonable control. If Customer does not purchase the quantity upon which quantity prices are based, Customer will pay the non-discounted price for the quantity actually purchased and/or a cancellation or restocking fee. Prices are exclusive of taxes, impositions and other charges, including: sales, use, excise, value added and similar taxes or charges imposed by any government authority, international shipping charges, forwarding agent's and broker's fees, bank fees, consular fees, document fees and import duties. 3. TERMS OF PAYMENT All payments must be in US Dollars. For Domestic Orders We accept major credit cards MasterCard, VISA, American Express, and Discover. We also offer C.O.D. and Pre-paid by wire transfer, money order, company or personal check (personal check will delay order up to two weeks). Open Account Credit is available to businesses, schools and institutions or as otherwise specified by MilesTek subject to an approved credit application. To obtain a credit application, please contact any Customer Service or Sales Representative by calling 1-800-524-7444, or (+1) 940-484-9400. Or you may download a copy of the MilesTek Credit Application form.

For International Orders We offer MasterCard, VISA, American Express, Discover, prepaid by wire transfer, cashier's check in U.S.Dollars, as well as open account credit to qualified institutions and businesses. We cannot accept personal checks or certified personal checks. Money orders can result in significant delays. Payment via Open Account Credit can be established for companies having three U.S. references. We also offer Pre-paid by wire transfer, a wire transfer fee of $25.00 must be included. Orders will not be accepted until funds have been received in full and Purchase Order (PO) has been received. Customer is responsible for duties and taxes. 3.1 TERMS OF PAYMENT For All Orders Customer agrees to pay the entire net amount of each invoice from MilesTek pursuant to the terms of each such invoice without offset or deduction. Orders are subject to credit approval by MilesTek, which may in its sole discretion at any time change the terms of Customer's credit, require payment in cash, bank wire transfer or by official bank check and/or require payment of any or all amounts due or to become due for Customer's order before shipment of any or all of the Products. If MilesTek reasonably believes that the Customer's ability to make payments may be impaired or if Customer fails to pay any invoice when due, MilesTek may suspend delivery of any order or any remaining balance thereof until such payment is made or cancel any order or any remaining balance thereof, and Customer will remain liable to pay for any Products already shipped and all Non-Standard Products ordered by Customer. Customer agrees to submit such financial information as MilesTek may reasonably require for determination of credit terms and/or continuation of credit terms. Checks are accepted subject to collection and the date of collection will be deemed the date of payment. Any check received from Customer may be applied by MilesTek against any obligation owing by Customer to MilesTek under this or any other contract, regardless of any statement appearing on or referring to such check, without discharging Customer's liability for any additional amounts owing by Customer to MilesTek. The acceptance by MilesTek of such check will not constitute a waiver of MilesTek's right to pursue the collection of any remaining balance. Invoices not paid when due will bear interest to date of payment at the annual rate of eighteen (18%) percent or such lower rate as may be the maximum permitted by law. If Customer fails to make payment when due, MilesTek may pursue any legal or equitable remedies, in which event MilesTek will be entitled to reimbursement for costs of collection and reasonable attorneys' fees. There is a $25.00 service charge on all returned checks. 4. SALES TAX Only residents of the State of Texas need to remit sales tax. MilesTek does not remit sales tax to states other than Texas. Any sales tax due that is not collected by MilesTek is the responsibility of the customer. 5. DELIVERY AND TITLE All shipments by MilesTek are F.O.B. point of shipment, and the amount of all transportation charges will be paid to MilesTek by the Customer in addition to the purchase price of the Products. Subject to MilesTek's right of stoppage in transit, delivery of the Products to the carrier will constitute delivery to Customer and title and risk of loss will pass to Customer. MilesTek will make reasonable efforts to initiate shipment and schedule delivery as close as possible to Customer's requested delivery date(s). Customer acknowledges that delivery dates provided by MilesTek are estimates only and that MilesTek will not be liable for failure to deliver on such dates. Selection of the carrier and delivery route will be made by MilesTek unless specifically designated by Customer. MilesTek reserves the right to make deliveries in installments. Delay in delivery of one installment will not entitle Customer to cancel any other installment(s). Delivery of any installment of Products within thirty (30) days after the date requested will constitute a timely delivery. Delivery of a quantity which varies from the quantity specified shall not relieve Customer of the obligation to accept delivery and pay for the Products delivered.

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T

TERMS OF CONDITIONS 6. MILESTEK'S LIMITED WARRANTY MilesTek warrants its products to be free from defects of workmanship and material. If any such defects occur, replacement will be made without charge to our Customers. We strive to provide 100% Satisfaction for our Customers to the best of our ability. This warranty does not cover normal wear and tear, and abuse. The warranty period depends upon the product. All products are covered by a LIMITED WARRANTY for a period of thirty (30) days from the date of shipment when purchased from MilesTek. Customer must notify MilesTek within 30 days from date of shipment of any defective product. An approved Return Materials Authorization (RMA) number must first be obtained from MilesTek prior to the return of any merchandise to MilesTek for inspection under warranty. Shipping charges for all materials returned under this Limited Warranty are to be prepaid by the Customer. This warranty is limited to the original purchaser. MilesTek's liability arising out of any sale of products to Customer is expressly limited to either (1) Credit or refund for the purchase price paid by Customer for such products (without interest), or (2) Repair and/or replacement of such products, found to be defective after inspection by MilesTek at its main headquarters, and such remedies shall be exclusive and in lieu of all others. Implied warranties of fitness for a particular purpose and merchantability are specifically excluded and shall not apply. Non-Standard products as defined in Section 1 above are not eligible for return for refund. Products returned for refund may be subject to a 20% restocking fee. Customer's obligations and MilesTek's remedies, with respect to defective or nonconforming products, are solely and exclusively as stated herein. Further, no warranty will apply if the Product has been subject to misuse, neglect, accident or modification, or has been soldered or altered in any way. All returns must be shipped to: MilesTek Corp., 1506 Interstate 35W, Denton, TX 76207-2402 USA 7. LIMITATION OF LIABILITIES In no event shall MilesTek be liable for any special, incidental or consequential damages of any nature including, but not limited to, damages resulting from loss of profit or revenue, recall costs, claims for service interruptions or failure to supply downtime, testing, installations or removal costs, costs of substitute products, property damage, personal injury, death or legal expenses. Customer's recovery from MilesTek for any claim shall not exceed the purchase price paid by Customer for the goods, irrespective of the nature of the claim, whether in warrant, contract or otherwise. CUSTOMER SHALL INDEMNIFY, DEFEND AND HOLD MILESTEK HARMLESS FROM ANY CLAIMS brought by any party regarding products supplied by MilesTek and incorporated into the customer's product. 8. USE OF PRODUCTS IN LIFE SUPPORT, NUCLEAR AND CERTAIN OTHER APPLICATIONS Products are intended for commercial use only. Products are traceable at the manufacturer's level only. Not all products have lot level traceability. Products sold by MilesTek are not designed, intended or authorized for use in life support, life sustaining, human implantable, nuclear facilities, or other applications in which the failure of such Products could result in personal injury, loss of life or catastrophic property damage. If Customer uses or sells the Products for use in any such applications: (1) Customer acknowledges that such use or sale is at Customer's sole risk; (2) Customer agrees that MilesTek is not liable, in whole or in part, for any claim or damage arising from such use; and (3) Customer agrees to indemnify, defend and hold MilesTek harmless from and against any and all claims, damages, losses, costs, expenses and liabilities arising out of or in connection with such use or sale. 9. STATEMENTS AND ADVICE If statements or advice, technical or otherwise, are offered or given to Customer, such statements or advice will be deemed to be given as an accommodation to Customer and without charge and MilesTek shall have no responsibility or liability for the content or use of such statements or advice.

For Expert Customer Service, Call Our Sales Team Today!

10. FORCE MAJEURE MilesTek will not be liable for delays in delivery or for failure to perform its obligations due to causes beyond its reasonable control, including, but not limited to, product allocations, material shortages, labor disputes, transportation delays, unforeseen circumstances, acts of God, acts or omissions of other parties, acts or omissions of civil or military authorities, Government priorities, fire, strikes, floods, severe weather conditions, computer interruptions, terrorism, epidemics, quarantine restrictions, riots, or war. MilesTek's time for delivery or performance will be extended by the period of such delay or MilesTek may, at its option, cancel any order or remaining part thereof without liability by giving notice to Customer. 11. EXPORT CONTROL Products purchased or received under these Terms and Conditions are subject to export control laws, restrictions, regulations and orders of the United States. Customer agrees to comply with all applicable export laws, restrictions and regulations of the United States or foreign agencies or authorities, and shall not export, or transfer for the purpose of re-export, any product to any prohibited or embargoed country, including but not limited to The Balkans, Belarus, Burma, Cote d'Ivoire, Cuba, the Democratic Republic of the Congo, Iran, Iraq, North Korea, Sudan, Syria, and Zimbabwe, or to any denied, blocked, or designated person or entity as mentioned in any such United States or foreign law or regulation. Customer represents and warrants that it is not: (i) on any the Denied Persons List (as compiled by the United States Department of Commerce), Specially Designated Nationals List (as compiled by the United States Treasury Department), Debarred Persons List (as compiled by the United States State Department) or any other United States or other government list of prohibited persons; and (ii) otherwise prohibited by United States or other law from purchasing the products or services hereunder. Customer shall be solely responsible to obtain any license to export, re-export or import as may be required. 12. GENERAL The Terms and Conditions may not be modified or cancelled without MilesTek's written agreement. Accordingly goods furnished and services rendered by MilesTek are sold only on the terms and conditions stated herein. The sale of Products hereunder will be governed by the Terms and Conditions, notwithstanding contrary or additional terms and conditions in any order purchase order, planning schedule, acknowledgment, confirmation or any other form or document issued by either party effecting the purchase and/or sale of Products. Notwithstanding any terms and conditions on Customer's order, the information and conditions on the Credit Application are controlling over Customer and MilesTek. Any conflicting statements or terms listed on the Customer purchase orders, invoice, confirmations or other Customer generated documents ("Customer Documents") whether heretofore or hereafter submitted are negated by submission of the Credit Application and the issuance of credit by MilesTek, and all different or additional terms and conditions contained in any Customer Documents are hereby objected to by MilesTek. MilesTek's performance of any contract is expressly made conditional on Customer's agreement to MilesTek's Terms and Conditions of Sale, unless otherwise specifically agreed in writing by MilesTek. In the absence of such agreement, commencement of performance and/or delivery shall be for Customer's convenience only and shall not be deemed or construed to be acceptance of Customer's terms and conditions, or any of them. No rights, duties, agreements or obligations hereunder may be assigned or transferred by operation of law, merger or otherwise, without the prior written consent of MilesTek. The obligations, rights, terms and conditions hereof will be binding on the parties hereto and their respective successors and assigns. The waiver of any breach of any term, condition or covenant hereof or default under any provision hereof will not be deemed to constitute a waiver of any other term, condition, or covenant contained herein or of any subsequent breach or default of any kind or nature. Any provision hereof which is prohibited or unenforceable in any jurisdiction shall, as to such jurisdiction, be ineffective to the extent of such prohibition or unenforceability without invalidating the remaining provisions hereof in that jurisdiction or affecting the validity or enforceability of such provision in any other jurisdiction. The Terms and Conditions will be governed by and construed in accordance with the laws of the State of Texas and the applicable laws of the United States.

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

ORDER FORM

Order at milestek.com (Save 5%) or call 800-524-7444 E-mail: salesinfo@milestek.com Fax: 940-484-9402

Stock Orders Shipped Same Day until 5 P.M. C.S.T

Solutions for Your Installation Challenges HDMI OVER FIBER see page 26

HDMI AUDIO EXTRACTOR CONVERTER see page 28

ALL VIDEO TO HDMI CONVERTER see page 30

HDMI HDBASET SINGLE CAT5E/CAT6 EXTENDERS see page 21-22

HDMI WIRELESS EXTENDER SET see page 31

VGA/HDMI WIRELESS PRESENTATION SYSTEM see page 31

For Expert Customer Service Call Today! 800-524-7444 • milestek.com

1506 Interstate 35W Denton, TX 76207-2402

Order from MilesTek today

800-524-7444 • milestek.com

+ Now even more connectivity solutions available! Milestek Has Been Acquired by L-Com For over 30 years, our commitment to quality and service as a complete connectivity solutions provider has helped MilesTek gain the trust of thousands customers all over the world. We’re excited to provide even greater service and product options to our customers through our recent acquisition by L-Com.

L-Com, a global designer and manufacturer of wired and wireless connectivity products, offers a wide range of solutions including cable assemblies, connectors, adapters, industrial networking components, and custom connectivity products, as well as a broad line of wireless products.

We invite MilesTek customers to check out L-Com’s product offering at L-Com.com.

Contact MilesTek for your pricing and availability on any items that fit your application.

Technical expertise, customer service and unbeatable value — that’s the MilesTek Advantage