IV Giving Sets that always deliver!
Flip Cover
Designed Aniset Anti–Kink
3 Channel Air Vented Piercing Spike
Bacterial Air Vent
Compressible Drip Chamber
Veterinary
Particle Filter
This Millpledge Fluid Therapy Brochure incorporates our range of IV sets, accessories and equipment.
We are very proud of our veterinary designed products, manufactured for the specific needs of the Veterinary Professional. Everything within the pages of this brochure has been designed with the animal profession in mind.
Dial Flow Regulator
Have everything run as smoothly and efficiently as possible.
By using Aniset Anti-Kink® IV Sets and accessories we believe you will achieve the best outcome for your patients. From companion animals to large animals, and the smallest closure stopper to our large animal IV, you will find everything you need for your Fluid Therapy requirements.
Learn about the Anifusion® difference.
We’ve launched the most comprehensive IV Pump on the market, specifically designed for veterinary use. More details of this can be found in this brochure.
Aniset Anti-Kink®
IV Giving Set Components
Drip chamber with vented spike:
• Allows for rapid and controlled infusion.
• Assists in priming.
• Squeezable chamber with 15 Micron particle filter to prevent contaminants entering the fluid line.
Dial-A-Flow regulator:
Control fluid volume by simply turning the dial to required flow rate.
Baxter Set slide clamp: Removable/reusable slide clamp enables use with Baxter fluid pump.
Roller clamp with IV line dock: Park your excess tubing here.
Flip covered: bacterial air vent Open when using non collapsible bottles.
Needle-Free port:
• Entirely removes the risk of needle injury.
• NF allows for sets to be ‘piggy-backed’ easily.
Proximal injection port with finger guard:
Reduces the risk of needle related injuries when adding meds to the line.
Quick fluid clamp:
Allows for a quick on/off control of fluids.
Self priming end cap:
• Allows the set to be primed, expelling all air-bubbles.
• No fluid loss, waste or mess –keeps the treatment area and patient clean and dry.
Anti-Kink® tubing:
• Continuous fluid flow.
• No tube occlusions.
S/L connector: Joins to an indwelling catheter with a push fit connection.
L/L connector:
• Secure connection to any IV line accessory or catheter.
• Can be slid back if required creating an S/L connection.
Anti-Kink® spiral tubing:
• Allows for a longer length.
• Ideal for patients in larger recovery areas and runs.
Slide clamp:
Allows end of tube to remain primed with fluid if break point is used and patient needs to be moved.
Extention tubing:
Built-in extention tubing – Allows patients to be easily disconnected from fluids for exercise purposes.
Distal injection port: For immediate effect of additional medication.
Aniset™ IV S/L & L/L Giving Sets
With
Extension
78” - 106” IV administration sets with Slip Luer or Luer Lock connection.
Aniset Anti-Kink® provides superior benefits to the animal patient and practice throughout the infusion. Designed specifically for veterinary use.
HB06540A
HB06541A
HB06542A
HB06740A
HB06741A
Aniset™ (A) L/L (15 drops/mL) With Extension
Aniset™ (A) L/L (15 drops/mL) With Extension
Aniset™ (A) S/L (15 drops/mL) With Extension
Aniset™ (B) L/L (15 drops/mL) With Extension
Aniset™ (B) L/L (15 drops/mL) With Extension
TALLY CONS
Infusion pump compatible
Aniset™ (A) compatible with Abbott® or Hospira® calibrated IV Pumps. Aniset™ (B) compatible with Baxter® calibrated IV Pumps.
Aniset™ Dial-A-Flow
Aniset™ Pediatric
70” length.
Anti-kink® IV administration set with 15 Micron Particle Filter within the drip chamber. This helps to prevent foreign bodies or crystallized fluids from passing into the fluid line.
Designed specifically for veterinary use.
Infusion pump compatible
Code
HB06536A
HB06736A Description
Aniset™ (A) Pediatric (60 drops/mL) Aniset™ (B) Pediatric (60 drops/mL)
Aniset™ (A) compatible with Abbott® or Hospira Aniset™ (B) compatible with Baxter® calibrated IV Pumps.
15 micron particle filter on all Pediatric sets. Helps to block foreign bodies or crystallized fluids from passing into the fluid line.
Aniset™ Pediatric
Dial-A-Flow
70” length.
Anti-kink® IV administration set equipped with both a 15 Micron Particle Filter within the drip chamber and high precision Dial Flow Regulator (5-250mL/hour range).
Designed specifically for veterinary use.
Code
HB06548A
Aniset™ Pediatric Dial-A-Flow (60 drops/mL)
Aniset™ Spiral
136” length IV set with fully integrated spiral tube (94”).
Anti-kink® IV administration set with high standard tubing that allows full extensibility and full recoil for improved patient mobility and user convenience. Designed specifically for veterinary use.
Aniset™ (A) compatible with Abbott® or Hospira® calibrated IV Pumps.
Aniset™ (B) compatible with Baxter® calibrated IV Pumps.
Infusion pump compatible
Have an excited patient? Use Aniset™ Spiral with extendable tubing for improved patient mobility.
Aniset™ Transfusion Blood Giving Set
2.8 yards long.
Anti-kink® Blood Giving Set with soft large gauge tubing and in-line filter for immediate rapid infusion at the rate of 20 drops/mL. Designed specifically for veterinary use.
Aniset™ IV Opset
73” length. Auto filling IV giving set.
Intended for use on all small animal patient sizes during routine infusion under controlled and supervised conditions or surgery. Includes a silicone injection port at the distal end.
Aniset Anti–Kink
Needle-Free IV Administration Sets
Infusion pump compatible
Aniset™ Needle-Free
Anti-kink® IV administration set that incorporates a veterinary designed, Y-Style, safer Needle-Free (NF) injection valve. Designed specifically for veterinary use. Allows the introduction of fluid to the IV line without the use of needles, removing the incidence of needle stick related injuries, accidents and costs. Also allows other IV accessories, extensions and secondary IV lines to be connected seamlessly without the need for needles, clamps or ancillary joining devices. Swabable with a protective cap. Needle-Free IV Sets are also available with Dial-A-Flow Regulator for controlling fluid during surgery.
NF06536A
NF06540A
NF06541A
NF06545A
NF06548A
NF06550A
NF06736A
NF06741A
Aniset™ NF (A) Pediatric (60 drops/mL)
With Extension
(15 drops/mL) With Extension
Aniset™ NF Dial-A-Flow (15 drops/mL)
Aniset™ NF Pediatric Dial-A-Flow (60 drops/mL)
Aniset™ NF (A) Spiral (15 drops/mL)
Aniset™ NF (B) Pediatric (60 drops/mL)
Aniset™
(B) L/L (15
With Extension
Primary IV sets have 2 Needle-Free injection ports
Aniset™ (A) compatible with Abbott® or Hospira® calibrated IV Pumps. Aniset™ (B) compatible with Baxter® calibrated IV Pumps.
NF Secondary IV Sets a safer way for ‘piggy-backing’ fluids.
The Aniset™ Secondary IV set has a male luer lock, that is designed to be connected to the NF injection port of the primary Aniset™ IV set.
The combined use of Needle-Free IV primary and secondary sets allow two IVs to be connected quickly and easily for administering additional fluids by volume or fluid mixture to your patient. This allows for a greater volume of fluid to be administered over extended periods of time without the need to regularly change smaller fluid containers and bags.
Secondary IV sets have 1 Needle-Free injection port
Aniset Anti–Kink
Helps protect UV light sensitive IV fluids
Infusion pump compatible
SAFE
Aniset™ UV
Light refractive laminated bronze
colored Anti-Kink® tubing.
Using the Aniset™ UV whilst administering light sensitive liquid medications reduces the risk of molecule crystallization and drug photodegradation via an IV. Aniset™ UV tubing, Needle-Free injection sites, Drip Chamber, extension and connecting components. This provides a protective refractive barrier to light, maintaining drug potency and limpidity, and reducing the potential harmful effects that light has on drugs administered via transparent, pellucid IV sets.
Extension set included
All Colloids are photosensitive. (Gelatins, Dextrans & Hydroxethyl Starches (HES). To help, see the list to the right of this text to identify fluids that are also photosensitive. Always check drug label and alternative resources for photosensitive drugs.
The Aniset™ UV range of IV fluid administration sets are equipped with the same high-quality features as our standard Needle-Free sets with the added benefit of the UV protective material throughout the entire length.
Aniset™ UV NF (A) Pediatric (60 drops/mL)
UV NF (A) L/L (15 drops/mL) Aniset™ UV NF (A) L/L (15 drops/mL)
UV NF Dial-A-Flow (15 drops/mL)
UV NF Pediatric Dial-A-Flow (60 drops/mL) Aniset™ UV NF (B) L/L (15 drops/mL) Aniset™ UV NF (B) L/L (15 drops/mL)
Aniset™ (A) compatible with Abbott® or Hospira® calibrated IV Pumps. Aniset™ (B) compatible with Baxter® calibrated IV Pumps.
Examples of IV fluids affected by UV light
Antibiotics:
Cefovecin (convenia)
Ceftriaxone sodium
Enrofloxacin
Metronidazole
Antiemetic: Ranitidine
Class C: Diazepam
Diuretic: Furosemide
Gut stimulus: Metoclopramide
Local Anaesthetic: Lidocaine
Pain - opiate:
Buprenorphine
Morphine Sulphate
Pethidine
Steroid: Betamethasone
Dexamethasone
Vasodilation:
Adrenaline
Aminophylline
Atropine Sulphate
Vasopressin: Dopamine HCL
Vitamins:
Vitamin B1
Vitamin B6
Vitamin C
Vitamin K1
VETERINARY PROFESSIONAL IV PUMP
Anifusion® is the most comprehensive fluid delivery system, designed specifically for veterinary medicine.
Veterinary Specific
Includes CRI and KVO modes
Accurate
Fluid volume delivery to within 1% *
Constant Rate Infusions
Used when including accurate delivery of a drug from within the primary fluid bag
Rechargeable Battery
Battery lasts in excess of 8 hours at a delivery of 80mLs per hour*
Fast Setup
Quick and easy set-up. Calibrate up to 15 lines
Blood Compatible
Meets blood and Component
Blood Quality Requirements
GB18469-2012
Animal Mode Automatically calculate hydration.
Touch screen
Touch screen with easy to navigate screens
Anifusion® has been designed to function and perform in close proximity to multiple patients and it’s one of the quietest pumps available. The alarm can be reduced, to avoid spooking neighboring patients and the screen brightness can be lowered, offering a calm recovery environment.
The running screen displays all essential information clearly during an infusion.
The freedom to add patient details such as name, age and species.
Simple, quick to learn user interface. The perfect choice in any busy practice.
“We are very excited and satisfied with Millpledge’s Anifusion® infusion pump. The device is very easy to operate via the touchscreen. It is very quiet when infusing, with the different options you can offer every animal the perfect infusion therapy.”
Tom Southgate Practice Manager, Kleintierpraxis im Fischerhaus, Heidelberg, Germany
Aniset™ L/A IV Set
2 & 4 Spike
Large Animal IV Fluid Administration Set, available with either 2 or 4 insertion spikes. Designed to deliver higher volumes of fluids to larger animal patients, particularly horses. Clear large bore tubing (4.8mm i.d.) and robust connecting components used throughout.
1. Long single-vented spikes - For ease of insertion and high-volume fluid flow.
2. Pre-threaded black reusable/adjustable plastic ties - Attach to appropriate slot/holes in the IV. fluid bags to give greater security.
3. Both sets have a blue shut-off C-clamp on each delivery arm - Gives you control as to how many IV fluid containers are flowing at any one time.
4. Emergency Red C-clamp - For rapid shut-off of all fluids.
5. Free 360-degree rotating pivot connector risk of tubes twisting, allowing the set to turn freely and giving the animal more freedom of movement. It also makes unravelling the line a lot easier should it occur.
6. 100mL Burette clearly marked with 1mL graduations for accurate reading - Complete with filtered air vent and injection port to fluid chamber.
7. Automatic red shut-off float disc - Helps prevent air embolisms. Also allows for accurate visual readings of fluid volumes within the burette chamber.
8. Spiral tubing - 65cm tightly coiled. Extends to 250 - 300cm when stretched. Allows the animal to move freely and walk around.
9. Blue Slide Clamp - Accessible shut-off of fluids when required.
Use in conjunction with No.10 to assist in easy rotation of control clamp.
12. Mane grip tie assemblyHelps secure the set to the patient.
13. Distal ‘Y’ style latex free injection port - For ease of administering additional IV medication.
14. Rotating male luer lock - Allows for secure connection to an Anicath™ IV Catheter.
15. Fluid priming cap - Allows the set to be primed, expelling all the air bubbles without losing any fluid keeping the treatment area and patient clean and dry.
Anisite™
A small plastic closure stopper. With incorporated injection site/port for intermittent IV. injection of medication. Sterile packed for immediate use.
• Luer lock/slip fitting.
• Latex Free.
Anitap™
Three-way tap or stopcock. For simultaneous administration of infusion solutions and intermittent injection of additional medications when used in conjunction with other accessories such as Anisite™ or Anivalve™ Sterile packed for immediate use.
• Two screw-capped female luer ports – Use for injecting or aspiration.
• Male luer with rotating spin lock attachment – Connects to indwelling device.
• Lipid resistant plastic – Resistant to micro-cracks offering safer patient treatment.
• Arrow indication marks on the cap – Shows direction of flow.
Aniflow™ In-line Burette
150mL In-line Burette.
This set is used to measure and control volumes of IV. fluids being given intermittently to animals in-line with standard IV. giving sets or devices. Designed specifically for veterinary use.
• Capped, ported bottle/bag spike with Shut-off Roller Clamp on short standard tubing below.
• 150mL Burette, clearly marked 1mL graduated chamber with latex injection port and capped air filter vent at top.
• Short standard outlet tubing with fluid Shut-off Clamp.
Connection instructions
1. Insert the sharp vented piercing spike into your fluid container.
2. Insert the IV Set spike into the distal tube beneath the burette.
Anispike™
Sharp mini-spike device, with built-in bacterial air filter. For easy and safe Needle-Free repeated withdrawal of injectables from inverted rubber capped containers/phials. Sterile packed for immediate use.
• Sharp slim spike – For easy penetration of rubber stoppered phials.
• Built-in bacterial air filter – Prevents negative pressure build-up in containers and avoids contamination of contents.
MP Male Adapter Plug S/L
The ‘traditional’ standard length injection site. Attaches to hub of venipuncture device.
Aniset™ T-Connector
8cm length. Priming volume 0.3mL.
Sterile packed in a recyclable Millpack™ pouch.
Connect IV fluids here
Easy shut-off clamp. For quick singlehanded control
• Assists in connecting and disconnecting all IV sets – Avoids disturbing the position or accidental displacement of indwelling catheter.
• Needle-Free two-way injection valve – Allows for Needle-Free fluid administration or aspiration. Also reduces needle stick injuries to staff and patients.
• Female luer fitting – Connects to IV fluids.
Aniset™ T-Connector Plus
14.5cm length. Priming volume 0.8mL.
Sterile packed in a recyclable Millpack™ pouch.
Connect IV fluids here
Easy shut-off clamp. For quick singlehanded control
• Assists in connecting and disconnecting all IV sets – Avoids disturbing the position or accidental displacement of indwelling IV catheter.
• Male spin luer – For secure connection to indwelling IV catheter.
• Distal Needle-Free two-way injection valve – Allows for Needle-Free fluid administration or aspiration. Also reduces needle stick injuries to staff and patients.
• Proximal Needle-Free two-way swabable injection valve – Connects to IV fluids.
• Shut-off C-clamp – For quick ‘on/off’ fluid release.
• Kink resistant tubing – Less risk of occlusion.
• Large bore tubing – Gives more stability for larger heavier patients.
MP Microbore T-Connector™
Assists in connecting and disconnecting all IV sets. Avoids disturbing the position or accidental displacement of indwelling IV catheter as you can administer drugs and rapidly connect infusion lines to your patient.
Ideal for smaller patients
Distal end has a female luer fitting. Proximal end has male luer lock with latex injection port. It also has an easy shut-off ‘C’ clamp for quick single handed control.
Ani-Y-Port™
Allows two giving sets to be used in combination during fluid therapy. Especially useful with Aniset™ and Aniset™ Dial-A-Flow IV Giving Sets. Easily join two sets together to allow higher volumes of fluid without changing/renewing bags, saving money in the process.
Anicath™ fits securely to the distal end via a spin luer lock
• Overall length 16.5cm. Standard bore flexible tubing.
• Winged grip luer push/lock fit connectors on two branches at the proximal end.
• A spin luer lock connection at the distal end.
Anicath™ IV Catheters
Winged
Peripheral IV. Over-needle indwelling radiopaque IV catheters with small soft fixing wings. Thicker wall needle, IV catheters designed especially for veterinary use. Ranging from the most demanding thin micro 26G up to 14G sizes, suitable for all vein conditions in routine and delicate continuous peripheral intravenous procedures. Sterile packed in a recyclable Millpack™ pouch.
Non-Winged
Peripheral IV. Over-needle indwelling radiopaque IV catheters. Thicker wall needle, IV catheters designed especially for veterinary use. Ranging from the most demanding thin micro 26g up to 14g sizes, suitable for all vein conditions in routine and delicate continuous peripheral intravenous procedures. Sterile packed in a recyclable Millpack™ pouch.
Anicath™ Winged & Non-Winged - Features & Benefits
• Advanced design with ergonomic finger grip – Easier to handle and allows for easy controlled insertion.
• Trocar locks on to the catheter – Prevents unnecessary rotation of the trocar when advancing the catheter.
• Early visualization of blood flashback, through highly transparent grip part – Confirms instant placing success.
• Multi-faceted sharp needle point – For ease of puncture techniques.
• Atraumatic, rounded and shaped end – Easier advancement without burring, more comfortable for your patient.
• Teflon catheter material – Safer for your patient.
• 26G available in both 16mm and 19mm lengths –Ideal for neonates and small furries.
Two advancement notches on the hub Aids sturdy advancement, provides suture ridge.
FLEXIBL E WINGS
Anicath™ Winged - Features & Benefits (additional)
• Soft fixing wings with suture holes – Enables more stability, they can also be sutured or taped into position.
Code
MP06214A
MP06216A
MP06218A
Anicath™ Winged
Anicath™ Winged
Anicath™ Winged
Anicath™ Winged
Anicath™ Winged Anicath™ Winged Anicath™ Winged Anicath™ Winged
MP06114A
MP06116A
MP06118A
MP06119A
MP06120A
MP06121A
MP06122A
MP06124A
MP06126A
MP06127A
Anicath™ Non-Winged
Anicath™ Non-Winged
Anicath™ Non-Winged
Anicath™ Non-Winged
Anicath™ Non-Winged
Anicath™ Non-Winged
Anicath™ Non-Winged
Anicath™ Non-Winged
Anicath™ Non-Winged
Anicath™ Non-Winged
Size
14g/45mm
16g/45mm
18g/45mm
18g/32mm
20g/32mm
20g/25mm
22g/25mm
24g/19mm
26g/19mm
26g/16mm
Anicath™ IV Wing Set
Siliconised stainless steel indwelling cannula.
With soft plastic wings. 12” length. Sterile packed for immediate use.
Ideal for Thoracocentesis and subcutaneous fluids.
• 12” length – Small bore tubing extension line with male luer lock connector.
• Available in four color-coded sizes – 19g, 21g, 23g and 24g.
Anicath™ IV Wing Set Anicath™ IV Wing Set
IV Wing Set
IV Wing Set
Anicath™ L/A
Suitable for short or long term use for up to 20 days. An advanced range of short to extended term use, Anti-kink® indwelling IV catheters are designed specifically for the larger animal where greater volumes of fluid are required. From a few hours to 20 days in use. Sterile packed in a recyclable Millpack™ pouch.
• Strong fixing wings with suture holes –Enables more stability; they can also be sutured or taped into position.
• Non-coring, tri-faceted needle bevel with greater wall thickness, 15% stronger than other brands – Reduced risk of bending on insertion.
• PUR with precision conical catheter material, Anti-kink® – Aligns to natural vein contours and inner wall surface profile.
• Siliconized – Superior glide during insertion and placement.
• Hydrophobic blood sealing plug in needle flashback chamber –Allows early visualization of venipuncture.
• Trocar locks on to the catheter – Prevents unnecessary rotation of the trocar when advancing the catheter.
• Two advancement notches on the hub – Aids sturdy advancement.
MP06352A
MP06353A
MP06354A
MP06372A
MP06374A
MP06375A
Anicath™ L/A
Anicath™ L/A
Anicath™ L/A
Anicath™ L/A
14g/5.25”
14g/3.5”
14g/3.25”
16g/5.25”
16g/3.25”
16g/3”
Aniject™ 3-Part Syringes
3-Part latex free syringes. Sizes range from 1mL
Zero Dead Space to 60mL. Sterile individually packed three-piece construction with accurate and legible graduation markings.
Part 1 - Transparent barrel
Part 2 - Plunger
Part 3 - Rubber plunger cap - forms a better seal between the barrel and the plunger.
The barrels and plungers are recyclable PP (Polypropylene), the rubber on the 3-part plungers is natural and can be recycled. Pouches are a combination of paper and recyclable PE film.
• Zero Dead Space 1mL – Allows complete drug administration limiting medication waste.
• Zero Dead Space 1mL has ultra-accurate 1/50th graduations – Ideal readability.
• Black graduation – Gives ideal contrast & readability.
• High barrel transparency – Simplifies inspection of syringe’s content.
• Very firm stop restraint – Minimizes risk of accidental plunger withdrawal.
• Eccentric needle mount on 5mL and larger syringes – Easier to inject or aspirate.
• Non-toxic, latex and pyrogen free – Safer for patients and user.
• Light lubrication of a silicone based medical lubricant – Allows for a safe regular sliding motion of the plunger.
• Luer-lock on 60mL syringe – Prevents detachment of needle when using high volumes of injectibles.
Aniject™ 3-Part Zero Dead Space Syringe (Centred Mount)
Aniject™ 3-Part Syringe (Centred Mount)
Aniject™ 3-Part Syringe (Offset)
Aniject™ 3-Part Syringe (Offset)
Aniject™ 3-Part Syringe (Centred Mount)
Aniject™ 3-Part Dosing Syringe
3-Part latex free 60mL Dosing Syringe. High Quality 60mL syringe with catheter-tip for ‘oral dosing’, feeding or flushing and irrigating wounds. Sold individually in blister packs.
Aniject™ 3-Part Syringe With Needle Attached
3mL 3-Part syringe with needle attached. Incorporates incredibly sharp hypodermic needle with greater wall thickness. Designed to minimise trauma on an animal’s skin.
Aniject™ 3-Part Syringe L/L + 22g x 3/4” Needle Aniject™ 3-Part Syringe L/L + 22g x 1” Needle
Aniject™ 3-Part Syringe S/L + 22g x 3/4” Needle
Peace of Mind for the Veterinary Professional Contact Us
Millpledge Veterinary, 828 Mitchell Rd, Thousand Oaks, CA 91320
Freephone: (888) 715-9909
Email: nasales@millpledge.com
Web: millpledge.com
Copyright Millpledge 2024. Brand names mentioned are all copyright of respective owners. Duplication and use of images or text is by prior written consent only.
We are continually updating and improving our products for the veterinary professional. Due to this commitment it may be necessary to alter some products and therefore goods received may differ slightly from those shown within this catalog.