Model TX3-UGA and TX3-USG Universal Series Gooseneck Adaptors Installation Instructions Gooseneck Mounting The TX3-UGA and TX3-USGA Universal Series Gooseneck Adaptors are used to connect the universal series enclosures to a pedestal or other type of enclosure. The TX3 universal enclosure uses the supplied screws and the four mounting holes at the back of the enclosure to connect to the gooseneck adaptor.
Figure 1: TX3-UGA Universal Series Gooseneck Adaptor 0.625”
TX3-UGA GOOSENECK ADAPTOR
TX3 UNIVERSAL ENCLOSURE 0.4” dia 0.4” dia 0.4” dia
0.4” dia
Feed the wires from the TX3 telephone access through the centre large hole of the gooseneck adaptor. Then mount the gooseneck adaptor to the pedestal or other enclosure. Secure the gooseneck with four screws whose holes surround the centre large hole. Dimension of the Universal Enclosure without the flush trim is: 16.25” H x 10.6” W x 2.75” D at bottom, 3” at top
Place the TX3 backbox on top on the gooseneck adaptor. Use the four 8-32” screws provided with the TX3 panel to fasten the TX3 backbox to the gooseneck adaptor through the mounting holes to the standoffs on the gooseneck adaptor as shown by dotted line.
LT-983 Rev 0 September 2009
Figure 2: TX3-USGA Slim Line Universal Gooseneck Adaptor 0.625”
TX3-USGA SLIM LINE GOOSENECK ADAPTOR
UNIVERSAL SLIM LINE ENCLOSURE
Dimension of the Universal Slim Line Enclosure without the flush trim is: 16.25” H x 6.4” W x 2.75“D at bottom, 3” D at top Installation instructions for UGA and USGA Gooseneck Adaptors: 1. Feed the wires from the TX3 telephone access through the centre large hole of the gooseneck adaptor. 2. Then mount the gooseneck adaptor to the pedestal or other enclosure. 3. Secure the gooseneck with four screws whose holes surround the centre large hole. 4. Place the TX3 backbox on top on the gooseneck adaptor. Use the four 8-32” screws provided with the TX3 panel to fasten the TX3 backbox to the gooseneck adaptor through the mounting holes to the standoffs on the gooseneck adaptor as shown by dotted line.