LED Lighting Catalogue
LANDROVER
Signal light upgrades All of our signal lamps (70mm & 95mm) come fitted with OEM Land Rover connectors for plug and play installation onto all 1996 and later vehicles, earlier vehicles will require the removal of the connectors. On most model Defenders excluding limited editions such as SVX the front position lights, brake/position and all four indicators are 70mm in diameter. The fog and reverse since 2002 have all been 95mm including special editions. Most special editions have 95mm rear lamps with the fog, reverse, brake and position being LED and the rear indicators remaining halogen bulb but becoming 95mm in size. Daytime Running Lamp (DRL) – recent legislation requires all new model cars to have DRLs fitted, as the Defender is an existing platform it is exempt from this requirement. However it is a great safety feature and also a styling enhancement and does not require any new holes or fitment of additional lamps when using our combined DRL & front position lamp. Lamps can be purchased in any combination, for example 70mm lamps fitted on the front and set of 6 SVX style 95mm lamps on the rear. 70mm front lights Direct replacement for existing units and fully compatible with all accessories such as KBX grilles and trims. Choice of clear or coloured lens for indicators Front position lamp with the option of integrated Daytime Running Light (DRL) 70mm rear lights Direct replacement for existing units and fully compatible with all accessories such as swing away spare wheel carrier Choice of clear or coloured lens for both brake and indicators 95mm rear lights Direct replacement for existing units using genuine Land Rover mounting plinths Choice of coloured or clear lens for brake, indicator, fog and reverse. Genuine Land Rover accessory – same as fitted to special editions such as SVX 02
70mm Upgrade n Direct swap for original n 4 year warranty n Submersible waterproof n No visible fixings n Colour coded cable n Aluminium base n Clear & coloured lenses
Size: 72.5mm Lens: Polycarbonate Housing: Die-Cast Light Source: LED Input Voltage: 10-30V DC
Current Draw: 0.03A > 0.6A depending on function Standards: ECE approval Sealed to IP67 Wiring: Approx 600mm cable or 100mm with OE connector
n All functions available
Available as: Indicator – Amber lens Indicator – Clear lens Brake & position – Red lens Brake & Position – Clear lens Front position – Clear lens Front position & DRL – Clear lens Rear fog – Red lens Rear fog – Clear lens Reverse
n Made in USA
03
Front position lamp with the option of integrated Daytime Running Light (DRL)
95mm Upgrade sometimes referred to as NAS or SVX style lamps
n NAS spec size n OE Land Rover supplier n Foam mounting gasket n Genuine LR accessory n Genuine LR mounting kit n Stainless steel screws
Size: 95mm Lens: PMMA Housing: ABS & Polycarbonate Light Source: LED Input Voltage: 12V DC
Current Draw: 0.03A > 0.6A depending on function Standards: ECE approval Sealed to IP67 Wiring: Approx 500mm cable or 100mm with OE connector
Available as: Indicator – Amber lens Indicator – Clear lens Brake & position – Red lens Brake & Position – Clear lens Rear fog – Red lens Rear fog – Clear lens Reverse 05
95mm and 70mm Sets 403LEDRR8 4 x 70mm amber lens indicators 2 x 70mm clear lens front position 2 x 70mm red lens brake & position
403LEDRR895MM 4 x 70mm amber lens indicators 2 x 70mm clear lens front position 2 x 70mm red lens brake & position 1 x 95mm clear lens reverse 1 x 95mm red lens rear fog
403LEDRR8C 4 x 70mm clear lens indicator 2 x 70mm clear lens front position + DRL 2 x 70mm clear lens brake & rear position
06
403LEDRR8C95MM 4 x 70mm clear lens indicator 2 x 70mm clear lens front position + DRL 2 x 70mm clear lens brake & rear position 1 x 95mm clear lens reverse 1 x 95mm clear lens rear fog
407NAS95MMSET6C 3 x 95mm clear lens indicator 2 x 95mm clear lens brake & rear position 1 x 95mm clear lens rear fog 1 x 95mm clear lens reverse
All sets include fixings, wiring and upgraded LED flasher relay where required. Any combination of size and colour available please call for details
Model 8700 n Internal bezel colour – Black or Chrome n Direct swap for original n Up to 5 times brighter than sealed beam n Half the power consumption of halogen n Submersible waterproof n H2604 / 2D1 size n 20,000 hour rated life n 4 year warranty n Whiter light n Built in H4 connector
Size: 178mm Par 56 Lens: Polycarbonate Housing: Die-Cast Light Source: LED Raw: 1,350 Lumens Effective: 650 Lumens Low Beam 760 Lumens High Beam Input Voltage: 12-24V DC
Current Draw: 2.5 Amps @ 12V DC Standards: ECE Reg 112 Sealed to IP67 ECE Reg 10
Wiring: H4 plug adaptor Features: Direct replacement for standard 178mm (7�) sealed or semi-sealed headlight inserts
07
Model 8700 n Integral front position lamp n Internal bezel colour – Black or Chrome n Direct swap for original n Up to 5 times brighter than sealed beam n Half the power consumption of halogen n Submersible waterproof n H2604 / 2D1 size n 20,000 hour rated life n 4 year warranty n Whiter light n Built in H4 connector
08
Size: 178mm Par 56 Lens: Polycarbonate Housing: Die-Cast Light Source: LED Raw: 1,350 Lumens Effective: 650 Lumens Low Beam 760 Lumens High Beam Input Voltage: 12-24V DC
Current Draw: 2.5 Amps @ 12V DC Standards: ECE Reg 112 Sealed to IP67 ECE Reg 10
Wiring: H4 plug adaptor Features: Direct replacement for standard 178mm (7�) sealed or semi-sealed headlight inserts
Model 8701 n Internal bezel colour – Black or Chrome n Complete with housing n E approved n Driving beam pattern n Submersible waterproof n H2604 / 2D1 size n 20,000 hour rated life n 4 year warranty n Whiter light
Size: 178mm PAR 56 Lens: Glass Housing: Die-Cast Light Source: LED Raw: 1,800 Lumens Effective: 970 Lumens Input Voltage: 12-24V DC
Current Draw: 2.5 Amps @ 12V DC Standards: ECE Reg 112, Sealed to IP67 ECE Reg 10
Wiring: H4 plug adaptor Features: Direct replacement for standard 178mm (7�) sealed or semi-sealed headlight inserts
n Half the power consumption of halogen
09
Model 7155 n 117460 Candela output (Pencil beam) n Up to 5 times brighter than sealed beam n Half the power consumption of halogen n Clear or coloured lens covers available n Submersible waterproof n Choice of protective covers n 20,000 hour rated life n 4 year warranty n Whiter light
Size: 167mm x 119mm Lens: Glass or Polycarbonate Housing: Die-Cast Light Source: LED Raw: TBA Effective: TBA Input Voltage: 12-24V DC
Current Draw: 3.7Amps @12V DC Pencil 3.25Amps @12V DC Driving Standards: ECE Reg 112 Sealed to IP67 ECE Reg 10
Wiring: Deutsch DT042P
n Built in waterproof connector n Choice of black or silver housing
11
Model 8655 n E approved n Driving beam pattern n Submersible waterproof n PAR 46 size n 40,000 rated life n 4 year warranty n Whiter light n Low power consumption
12
Size: 146mm PAR 46 Lens: Glass Housing: Aluminum Light Source: LED Raw: TBA Effective: TBA Input Voltage: 12-24V DC
Current Draw: 2.8 Amps @ 12V DC Standards: ECE Reg 112 Sealed to IP67 ECE Reg 10
Wiring: TBA
Model 4410 n Integral waterproof connector n Low power draw n Brighter than 55W halogen n 40,000 hour rated life n 4 year warranty n Universal mounting n Flood or Spot beam pattern n Amber lens available
Size: 79mm Lens: Polycarbonate Housing: Die-Cast Light Source: LED Raw: 1,100 Lumens Effective: 770 Lumens Input Voltage: 12-48V DC
Current Draw: 1.20 Amps @ 12V DC Standards: Sealed to IP67 Wiring: Supplied with 2-pin Deutsch weather proof plug with 300mm cable Features: Universal mount
13
Remote Controlled Version Available! While the installation of our standard 9049 involves hooking up an in-cab on/off switch, the remote-controlled version requires nothing more than simply pressing a button on the programmable key fob. Available with the 4-module version only, this convenient option allows you to cycle through various combinations of lights being turned on & off with ease. One key fob comes standard with the remote-controlled version, however, additional fobs can be ordered at the time of purchase and come pre-programmed for your light.
Model 9049 n Remote control optional n 2, 4 or 6 module versions n Floor or driving beam versions n Heavy duty mounting bracket n Inline waterproof connector n 40,000 hour rated life n 4 year warranty
Size: 641 x 67mm Lens: Polycarbonate Housing: Die Cast Light Source: LED Raw: 2,200-6,600 Lumens Effective: 1,320-3,960 Lumens
Input Voltage: 12V or 24V DC Current Draw: 4 Amps @ 12V DC Standards: Sealed to IP67 ECE Reg 10 Wiring: 300mm harness Features: 2, 4 & 6 module versions available
15
Model 850 n Low cost n Unbreakable rubber housing n 40,000 hour rated life n 4 year warranty n Not polarity sensitive n Universal mount
16
Size: 136 x 89mm Lens: Polycarbonate Housing: Rubber Light Source: LED Raw: 420 Lumens Effective: 250 Lumens Input Voltage: 12V DC
Current Draw: 0.45 Amps @ 12V DC Standards: Sealed to IP67 Wiring: 150mm bare ends Features: Universal mount
Model 700 n Contemporary oval shape n 40,000 hour rated life n 4 year warranty n Integral waterproof connector n Universal mount n Flood, spot & trap patterns n IR version available n Amber version available
Size: 145 x 95mm Lens: Polycarbonate Housing: Die-Cast Light Source: LED Raw: 780 Lumens Effective: 400 Lumens Input Voltage: 12-48V DC
Current Draw: 2.0 Amps @ 12V DC Standards: Sealed to IP67 CE Recognized Wiring: Supplied with 2-pin Deutsch weather proof plug with 300mm cable Features: Universal mount
17
Model 783 n Multiple mounting options n Low profile design n 40,000 hour rated life n 4 year warranty n Integral waterproof connector n Universal mounting bracket
18
Size: 155 x 40mm Lens: Polycarbonate Housing: Die-Cast Light Source: LED Raw: 600 Lumens Effective: 430 Lumens Input Voltage: 12-48V DC
Current Draw: 1.0 Amp @ 12V DC Standards: Sealed to IP67 CE Recognized Wiring: Supplied with 2-pin Deutsch weather proof plug with 300mm cable Features: Universal mount
Model 830 n Common 100mm square size n 40,000 hour rated life n 4 year warranty n Integral waterproof connector n Universal mount n Flood, spot or trap patterns
Size: 95 x 95mm Lens: Polycarbonate Housing: Die-Cast Light Source: LED Raw: 840 Lumens Effective: 550 Lumens Input Voltage: 12-48V DC
Current Draw: 2.0 Amps @ 12V DC Standards: Sealed to IP67 Wiring: Supplied with 2-pin Deutsch weather proof plug with 300mm cable Features: Universal mount
19
Model 4100 n Virtually indestructible n Integral waterproof connector n No exposed metal parts n Corrosion proof housing n Can be mounted to roll cage n Trap or flood beam pattern n Common sealed bulb n Universal mounting n Value range
20
Size: 72 x 64mm Lens: Glass Housing: Rubber Light Source: MR16 Halogen Input Voltage: 12 or 24V DC
Current Draw: 1.67 Amps @ 12V DC Wiring: Supplied with 2-pin Deutsch weather proof plug with 300mm cable Features: Optional magnectic mount
Model 282 n Clear or frosted lens n White or red / white functions n Surface mounted n 40,000 hour rated life n 4 year warranty n Durable acrylic lens resists scratching
Size: Standards: 216 x 49mm Sealed to IP 67 Lens: Wiring: Acrylic Pre-wired with 150mm Housing: cable Reinforced Nylon Options: Light Source: Clear lens, Hazed lens and LED Red/White with hazed lens Input Voltage: available 12-24V DC Current Draw: 0.5 Amps @ 12/24V DC
21
Model 417 n Switchable red & white functions n Low power courtesy light/door switch function n 40,000 hour rated life n 4 year warranty n Acrylic lens resists scratching n Low profile mount
22
Size: 193 x 124mm Lens: Acrylic Housing: Reinforced Nylon Light Source: LED Input Voltage: 12V DC
Current Draw: 0.175 Amps (Red x 2) 0.325 Amps (White x 4) 0.025 Amps (White x 1) Standards: Standards IP66 Wiring: Wiring 150mm bare ends
Map Lights n Quality Osram product n Multiple lengths 100, 200 & 500mm n Hardwire & cigar plug variants n 40,000 hour rated life n 4 year warranty n Optional red illumination n Built in switch n Head rotates through 360 degrees
Size: 42 x 52mm Lens: Polycarbonate Housing: Matt black finish Light Source: LED Input Voltage: 12V DC Current Draw: 0.064 Amps @ 12V DC Standards: IP20 Wiring: 100mm
23
Blue Sea Split Charger n Marine grade n Hermetically sealed contacts/ vapour proof n Tin plated copper studs n 22mm long studs to accept multiple cables n Multiple cable entry points n Senses charge on either battery n Optional remote status LED n Capable of temporary immersion up to 30 minutes
24
Size: 99 x 89 x 48mm Max Current: 500A for 10 seconds Input Voltage: 10 – 30 volts Standards: IP67 Rated switch cycles: 10,000 Continuous current: 120A Wiring: M10 studs
Blue Sea Split Charger n Marine grade n Silver alloy contacts for increased reliability n Tin plated copper studs n 22mm long studs to accept multiple cables n Manual control / override n Senses charge on either battery n Remote switch & status LED n Highest rated current carrying capability on the market
Size: 93 x 52 x 139mm Max Current: 2,500A for 10 seconds Input Voltage: 10 – 30 volts Standards: IP66 Rated switch cycles: 10,000 Continuous current: 500A Wiring: M10 studs
25
BLue Sea Fuse Box Size: 85 x 165 x 39mm Cover: Polycarbonate Housing: Reinforced Polycarbonate Max current: 100A per block Max fuse size: 30A per fuse position Input voltage: 10 – 30 Volts Wiring: M5 studs for input M4 studs for individual circuits
12 way
26
6 way
Size: 85 x 125 x 39mm Cover: Polycarbonate Housing: Reinforced Polycarbonate Max current: 100A per block Max fuse size: 30A per fuse position Input voltage: 10 – 30 Volts Wiring: M5 studs for input M4 studs for individual circuits
n 6 & 12 way versions
n Tin plated copper studs
n Accepts standard blade fuses
n Marine grade
n Tin plated copper fuse holder terminals
n With or without negative bus
n Made in USA
n Fuse & power distribution box in one
n Spare fuses can be stored in cover
Blue Sea Fuse Holder n Marine grade n Made in USA n Stainless steel studs n Accepts ANL fuses up to 300A n Removable protective cover n Multiple cable entry points n UL 94-V0 base resists high heat n Design allows fuse replacement
Size: 115 x 38 x 42mm Cover: Polycarbonate Max fuse size: 500A Input voltage: 10 – 30 Volts Wiring: M8 studs Housing: Reinforced Polycarbonate
without removing fasteners
27
Carling Switches n Marine spec n Weatherproof n Silver plated contacts n Various symbols/legends available n Multiple switching configurations n Vibration resistant n Replaceable switch rockers/ actuators
Size: 49 x 39 x 25mm Housing: Polyester Max current: 20 Amps Input Voltage: 12 or 24 volts Standards: IP68 when mounted Wiring: 6.4mm female spade Rated switch cycles: 100,000
29
Jump start connectors n Bracket or panel mount options n Insulated divider n Easy installation n Red or Black versions n Colour coded insulating caps n Drilling template provided with panel mount version
30
Max Current: 350A continuous @12V DC Max Voltage: 48V DC Contacts: Brass hex Posts: Nickel plated mild steel Post Size: M10 Features: Suit panel thickness up to 9.5mm Glass filled nylon bush
Technical & legal information. The original equipment (OE) lamp is approved for use with a specific incandescent bulb; the replacement of this bulb with an LED bulb inside the OE housing invalidates the approval and makes the unit illegal for road use. All LED signal lamps listed in this catalogue carry the correct E approval for road use and are complete replacement units. The 70mm indicators are approved for use on the front and rear of the vehicle. 95mm LED lamps listed in the catalogue are approved for use on the rear only; for applications using 95mm lamps at the front please use the contact information on the back page LED headlights are approved under regulation 112 and as an aftermarket accessory do not require levelling or washing to pass an MOT. E approval makes the lamps suitable for use anywhere in Europe and any country accepting ECE regulations such as Russia and Japan. All lamps are correctly approved in both coloured and clear lens versions where applicable. 70mm lamps use the existing fixing holes and fix from the rear using bolts provided. 95mm lamps require the fitment of a supplied adaptor plinth which enables the use of the original 70mm fixing holes. Fog & Reverse - Where fitted prior to 2002 the Defender uses a rectangular shaped fog & reverse lamp, from 2002 through to the present day a 95mm lamp is used. Pre 2002 – the use of a 70mm fog & reverse or 95mm will require a small amount of additional work to mount both the fog & reverse. Post 2002 – 10 lamps set containing 95mm lamps with the optional connectors is a complete plug & play replacement without modification. Using the 70mm lamps will require a small amount of additional work to mount the fog & reverse. All indicator kits are supplied with a replacement 3 pin LED flasher relay
31
Mobilecentre PO Box 222, Evesham WR11 4WT United Kingdom www.mobilecentre.co.uk sales@mobilecentre.co.uk www.facebook.com/mobilecentre Tel +44 844 578 1000 Fax +44 844 578 1111