2018-swit-new-products-0618

NEW PRODUCTS 2018

Introduction

SWIT - Solution with Innovative Tech

✓ In SWIT’s 22-year history specialized in Film and Media Industry, always: ★ Quality-Oriented ★ Service-Spirit ★ Innovation-Based ✓ Independent R&D, production and sales ✓ Four major product lines ✓ “China Nasdaq” company ✓ European and American subsidiaries ✓ Worldwide sales: ✓more than 100 countries ✓more than 300 agents

1

Field / Studio LED Lights

PL-E series

Edge Mounted SMD LED Panel

Highlight: Thinner, Brighter and More Precise All Edge Lit：Thinner SWIT patented PL-E60/90 series： Brighter in entire lifecycle More Precise: CRI Ra 98, TLCI 99 and more uniform in entire lifecycle

PL-E series

Edge Mounted SMD LED Panel

Comparison of advantage and disadvantage Comparison

Direct Lit LED

Normal Edge Lit LED

SWIT Patent PL-E

Thinner

BAD

GOOD

GOOD

Lighter

BAD

GOOD

GOOD

Less Light Loss

BEST

Very BAD

BETTER

Bright. Uniformity

BEST

BAD

GOOD

CRI

OK

GOOD

BEST

Shadowless

BAD

GOOD

GOOD

Lighting Stability

GOOD

BAD

GOOD

Healthy & EP

GOOD

BAD

GOOD

Moisture- Proof

GOOD

BAD

GOOD

Radiating

BEST

BAD

BETTER

* Details in the following pages

PL-E series

Edge Mounted SMD LED Panel

Advantages of all Edge mounted LEDs ⚫ Thinner 83mm vs. 48mm ⚫ Lighter 4.1kg vs. 3kg

Diffuser space

83mm 4.1kg Direct Lit

48mm

Edge Lit 3kg

PL-E series

Edge Mounted SMD LED Panel Structure of Edge Lit Advantages of all Edge mounted LEDs

PL-E series

Edge Mounted SMD LED Panel

Normal Edge Lit - Disadvantages They need to refract and reflect the lights, so: LED light in

Effective light

light loss ⚫ More lights loss on all other light loss directions, including back Ink screen print Bumps ⚫ Brightness of middle area is light loss hard to uniform with edge area ⚫ Ink screen printing(for refraction)is unhealthy, not moistureproof, not weatherproof, poor stability(obviously dimmed and not uniform after half a year)

PL-E series

Edge Mounted SMD LED Panel

How PL-E series solves the disadvantages (Patent) ① Laser Pits’ 3D Grating vs. ink printing’s diffuse reflection： much less light loss and much more uniform Better CRI Ra and TLCI

PL-E series

Edge Mounted SMD LED Panel

How PL-E series solves the disadvantages (Patent) ② Laser Pits’ Physical Molding vs.

Chemical ink screen printing: ✓ ✓ ✓ ✓ ✓ ✓ ✓

No unhealthy Chemicals Permanent Stability Moisture- and Corrosion-Proof Climate-Proof Brightness not change over time Uniformity not change over time CRI not change over time

PL-E series

Edge Mounted SMD LED Panel

How PL-E series solves the disadvantages (Patent) ③ Two LED bars vs. normal one LED bar： ✓ ✓

Smaller lamp area for more luminance Less unit power to extend LED’s life

④ Patented design ensures seamless bonding of LED bars to metal frames with heat sinks: ✓ ✓

maximize the heat dissipation effect extend LED’s life

PL-E series

Edge Mounted SMD LED Panel Compare with 1st Generation Edge Light

S-2410

S-2420

PL-E60

PL-E90

60W, 1065Lux CRI Ra 96

40W, 623Lux CRI Ra 96

60W, 1500Lux CRI Ra 98

90W, 2200Lux CRI Ra 98

PL-E series

Edge Mounted SMD LED Panel Reference: CRI Comparison

PL-E series

Edge Mounted SMD LED Panel

Press knob to Quick Adjust Dimmer: 0-100% adjustable Quick mode: 10% stepping

Color Temperature: 2700K-6500K adjustable Quick mode: 2700-3200-4500-5600-6500

PL-E series

Edge Mounted SMD LED Panel Power Input Battery: V-mount or Gold mount DC IN: 4-pin XLR 11-36V Auto boost circuit: Brightness constant during battery voltage drop down

PL-E60 / 3KIT Edge Mounted SMD LED Panel

PL-E90 / 3KIT Edge Mounted SMD LED Panel

PL-E 3KIT

Edge Mounted SMD LED Panel

Application Scenarios of 3 Lights KIT

PL-E series

Edge Mounted SMD LED Panel

Optional Accessories

PL-E90D

Edge Mounted SMD LED Panel - DMX Development Background When lights are used in studio, they need DMX for convenient control.

So this PL-E90D is the DMX version.

We also add more functions on the control, for better experiences on both field lighting or studio lighting.

PL-E90D

Edge Mounted SMD LED Panel - DMX

PL-E90D Same LED, same front view as PL-E90 Different control box on rear side

* PL-E60D is also on progress

PL-E90D

Edge Mounted SMD LED Panel - DMX

DMX control DMX 512 protocol Standard 5-pin XLR, in and out 1 light occupies 2 DMX channels (Dimmer and Color temperature)

PL-E90D

Edge Mounted SMD LED Panel - DMX

Interaction control without additional controller Set CH address for each light in the network

CH 001

CH 001

DMX cable

CH 002

DMX cable

CH 001

DMX cable

CH 002

DMX cable

CH 002

DMX cable

Operate any of the CH 001 light, all the other CH 001 lights can be controlled together.

Max 512 CH addresses can be set.

LA-WR8

Pocket Wireless DMX Controller Paint Points for lights control ① Inconvenient It’s always troublesome to adjust the lights one by one, here and there, up and down.

We can use DMX, but the controller is too big for field setup and cable works are complex.

② Expensive in current Market Base Stations: USD1790 Light Adaptor: USD495 1 to 3 Kit: USD3800 1 to 10 Kit: USD7850

LA-WR8

Pocket Wireless DMX Controller LA-WR8 8-ch standard DMX 512 controller Compact design Work for all Lights with DMX function Use 2x AA batteries 7 Groups channel switch Black out key

LA-WR8

Pocket Wireless DMX Controller Advantages: ✓

✓ ✓ ✓ ✓

* Only prototype, size TBD

✓

Portability: small & very light Good Operability Good Compatibility & Extensibility Low Power Consumption & Durability Long distance & super wall penetration Cost Efficiency

LA-WR8

Pocket Wireless DMX Controller

Wireless DMX adaptor Connect with DMX IN of the light (5-PIN) Power by USB

Pocket Wireless DMX controller Control the light directly and wirelessly

LA-WR8

Pocket Wireless DMX Controller

Wireless DMX adaptor Work with all Skypanels with USB output

Pocket Wireless DMX controller Control the light directly and wirelessly

LA-WR8

Pocket Wireless DMX Controller

Wireless DMX adaptor Connect DMX light without USB output: Connect USB of PB-S220S battery.

Pocket Wireless DMX controller Control the light directly and wirelessly

LA-WR8

Wireless Adaptor

Pocket Wireless DMX Controller

Wireless Adaptor

Wireless DMX adaptor Use wireless adaptors for each light

Wireless Adaptor

Wireless Adaptor

LA-WR8

Wireless Adaptor

Pocket Wireless DMX Controller

DMX OUT

DMX IN

DMX OUT

DMX IN

DMX OUT

Wireless DMX adaptor Use 1 wireless adaptor and other lights by DMX cable

DMX IN

LA-WR8 Group Switching Button

Pocket Wireless DMX Controller Channel and Group Setting Normal Panel Light (SWIT) 1 light occupy 2 DMX channels CH1: Brightness CH2: Color Temperature 1 LA-WR8 can control 4 Lights (Different DMX addresses) 7 Groups switching, totally 7x4=28 Lights with different DMX addresses.

LA-WR8 Group Switching Button

Pocket Wireless DMX Controller Channel and Group Setting ARRI SkyPanel 1 light occupy 8 DMX channels (Default) Min 3 channels, Max 36 channels

1 LA-WR8 can control 1 SkyPanel 7 Groups switching, totally 7 SkyPanels with different DMX addresses.

2

Wireless HD Transmission

CW Series

SDI / HDMI Wireless HD Transmission

Highest Performance Wireless System in the world ⚫ Uncompressed No signal loss at all ⚫ NO Delay Latency < 1ms

⚫ Application scenarios: ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Director Monitoring Remote Shooting Focus Pulling/Following Pan/Tilt Cradle Head Live Tournament/Sports Variety Show Wedding Broadcast Forum Broadcast …

CW Series

SDI / HDMI Wireless HD Transmission SWIT: Official, Authorized Legal Manufacture SWIT is official, authorized legal manufacture of AMIMON (Unique chipset provider in the world).

AMIMON do not sell chipsets to unauthorized manufactures, do not provide any technical support and cooperation to them. Amimon reserve all rights to take legal actions to pursue their duties.

CW Series

SDI / HDMI Wireless HD Transmission SWIT: Official, Authorized Legal Manufacture From left stand of Amimon in NAB2018, you can only see Teradek, Arri and SWIT.

CW-H150

HDMI 150m / 500ft Wireless CW-H150 HDMI 150m/500ft Uncompressed HDMI (Max 1080p60) 150 meters / 500 feet (Line-of-Sight) Less than 1 millisecond latency 2-ch HDMI embedded audio transmission

CW-S150

SDI 150m / 500ft Wireless CW-S150 SDI 150m/500ft Uncompressed 3G/HD-SDI 150 meters / 500 feet (Line-of-Sight) Less than 1 millisecond latency 2-ch SDI embedded audio transmission

CW-S300

SDI 300m / 1000ft Wireless CW-S300 SDI 300m/1000ft Uncompressed 3G/HD-SDI 300 meters / 1000 feet (Line-of-Sight) Less than 1 millisecond latency 2-ch SDI embedded audio transmission SDI timecode transmission

CW-SH150

SDI&HDMI 150m / 500ft Wireless CW-SH150 SDI&HDMI 150m/500ft Uncompressed 3G/HD-SDI & HDMI 150 meters / 500 feet (Line-of-Sight) Less than 1 millisecond latency 2-ch SDI/HDMI embedded audio transmission

CW Series

SDI / HDMI Wireless HD Transmission

Common Features

DFS comply

Dynamic Frequency Selection

3-4 pairs working in one location

1 transmitter to 4 receivers

CW Series

SDI / HDMI Wireless HD Transmission

Differences to S-49xx series 1.

2.

3.

4.

5.

New shorter antennas with better performance.

Support DFS function (Mainly for Europe).

Pair Tx and Rx to work, not 0-9 selection.

Set all antennas straight up to get better transmission.

CW-S300 supports Timecode transmission.

CW Series

SDI / HDMI Wireless HD Transmission

Easy Pair Operation 1.

2.

3.

Every set of CW- wireless Tx and Rx are already paired in factory.

You donâ&#x20AC;&#x2122;t need to re-pair every time, just plug and use.

If you have several pairs and mixed them each other, you need to Re-Pair the Tx and Rx. And itâ&#x20AC;&#x2122;s not difficult to operate.

S-4904/4914P SDI&HDMI 1km / 3300ft Wireless Development Background Long distance is always welcome.

To pro-long the wireless distance, and keep transmission quality, we upgrade the S-4904/S-4914 receiver to a new Panel Receiver, that is a 14dbi panel antenna with wireless receiver built-in.

S-4904/4914P SDI&HDMI 1km / 3300ft Wireless Development Background Other manufacturers have similar solution, but they just bundle the wireless receiver onto the backside of a panel antenna, connect antenna wires, and not easy to install.

S-4904/4914P SDI&HDMI 1km / 3300ft Wireless

S-4904P

Tx SDI & HDMI, 1000m / 3300ft

S-4914P

Rx

Tx

Rx

SDI & HDMI, 1000m / 3300ft

S-4904/4914P SDI&HDMI 1km / 3300ft Wireless

Panel Receiver

LEMO 4-pin DC IN

SDI output x1 â&#x20AC;&#x201C; CANARE BNC

S-4904/4914P SDI&HDMI 1km / 3300ft Wireless

Panel Receiver Video & Power indicator RSSI

Frequency CH display CH selection CH Apply

S-4904/4914P SDI&HDMI 1km / 3300ft Wireless

Panel Receiver â&#x2018; To cover the critical long distance, please set the panel surface aimed at the transmitter direction

â&#x2018;Ą For short distance, direct direction is no need.

3

Battery and Power Solutions

SWIT

Quality of SWIT Batteries all along

SWIT

Quality of SWIT Batteries all along

Compare with competitors â&#x2018; Competitor Complex crossed wires and jumper wires, will greatly increase failure rate.

SWIT Sophisticated and advanced design, Art-like; Clean wires; Very Reliable

SWIT

Quality of SWIT Batteries all along

Compare with competitors â&#x2018;Ą Competitor 1. Narrow Nickel belt: NG 2. Overlaid Nickel belt welding: Unreliable 3. Weld on Positive cap: Dangerous!

SWIT 1. Mounded wider Nickel plate: Reliable 2. No overlaid welding: Reliable 3. Avoid Positive cap welding: Reliable

PB-S series

Multi-sockets Square Battery Development Background The normal size batteries are designed for ENG cameras at the very beginning.

And nowadays there’re many Cinecameras with smaller body and the normal size batteries don’t match well.

Meanwhile, there’s lot of requirements on the USB sockets.

PB-S series

Multi-sockets Square Battery

PB-S98A/S 98Wh 6.8Ah

PB-S220A/S 220Wh 15.3Ah

PB-S series

S-8082

Multi-sockets Square Battery

PB-S98

PB-S220

S-8183

PB-S series

Multi-sockets Square Battery

PB-S98

PB-S220

Max Load 100W / 8A 3A fast charging <2.5H charging time

Max Load 150W / 12A 6A fast charging 3H charging time

PB-S series

Multi-sockets Square Battery

PB-S98

D-tap x2 Share total load

PB-S220

USB x1 5V / 2A

D-tap x4 Share total load

USB x1 5V / 2A

PB-S series

Multi-sockets Square Battery

Display power percentage when the battery is free of during charging.

Low power LCD, will not lose 1% for 2 months

PB-S series

Multi-sockets Square Battery

Display remaining running time when the battery is powering on camera or any devices.

Running time is calculated every 2 seconds.

Press power check button can switch to power percentage display.

PB-S series

Multi-sockets Square Battery

When remaining running time is less than 15 minutes, the LCD will flash to remind changing battery.

PB-S series

Multi-sockets Square Battery

Long press power check button for 5 seconds, it will display battery cycle times.

Discharge capacity over 10% will enter cycle counting system. When add up to 80%, the system will count as 1 cycle.

PB-S series

Multi-sockets Square Battery

Display warning info when the battery detected over discharging, over charging current / voltage, over load, short circuit, etc.

Refer the warning code to User Manual to take steps.

PB-S series

Multi-sockets Square Battery

SMBUS info system Display power info in both SONY and RED cameras, auto recognize and switch.

PB-R series

Heavy Duty Batteries

PB-R160S 160Wh/11.1Ah

PB-R290S 290Wh/20.1Ah

162x101x53mm, 1.08kg

162x101x69mm, 1.51kg

PB-R series

Heavy Duty Batteries

Dual Housing Strong Structure

Drop-off proof MORE THAN 1.5 meter

PB-R series

Heavy Duty Batteries

PB-R160

PB-R290

Max Load 150W / 12A

Max Load 200W / 16A

6A fast charging 1.3H charging time

6A fast charging 3.3H charging time

PB-R series

Heavy Duty Batteries

SMBUS info system Display power info in both SONY and RED cameras, auto recognize and switch.

PB-R series

Heavy Duty Batteries

When battery is free, press power check button, the upper 4 LEDs indicate remaining power percentage.

When battery is charging, the upper 4 LEDs flash and indicate remaining power percentage.

* Color of shell TBD

PB-R series

Heavy Duty Batteries

When battery is working on camera or other devices, press power check button, the upper 4 LEDs indicate remaining working hours, and lower 4 LEDs indicate remaining working minutes.

* Color of shell TBD

LB-CA50

Canon EOS-C300II & C200 Battery Development Background From EOS-C300 MK2, Canon use new batteries BP-A30/A60, with encoded info system. The cameras only recognize original batteries, which is really expensive to the camera users: BP-A60 list price USD495.

We canâ&#x20AC;&#x2122;t decode the info system, but we made such a solutionâ&#x20AC;Ś

LB-CA50

Canon EOS-C300II & C200 Battery Solution Install the battery into camera; The battery doesnâ&#x20AC;&#x2122;t have bottom power pins, And power the camera by D-tap to DC cable; The battery can be charged by D-tap charger.

LB-CA50

Canon EOS-C300II & C200 Battery

LB-CA50 73Wh, 5.1Ah BP-A60: 86Wh, 6Ah

PA-B2L4 D-tap to LEMO DC cable

PC-U130B2 Dual D-tap charger 3A fast charging

LB-CA50

Canon EOS-C300II & C200 Battery Basic Package 2x LB-CA50 batteries 1x PA-B2L4 DC cable 1x PC-U130B2 charger

Package price â&#x2030;&#x2C6; 1x BP-A60 * Can also sell individually

PC-U130

Ultra Portable Charger Development Background Many people like the previous S-3010A/S/B ultra portable charger. Anyway, itâ&#x20AC;&#x2122;s only 1.8A charging current, which is too slow.

So we upgrade the portable charger to 3A faster charging current, and add another dual D-tap heads version, to satisfy customers.

PC-U130

Ultra Portable Charger

PC-U130B Charge via D-tap PC-U130S For V-mount

PC-U130A For Gold mount

PC-U130B2 Dual D-tap heads

110x50x32mm, 260g

PC-U130

Ultra Portable Charger PC-U130B2 Charging time Battery

Time

2x LB-CA50

3h 30m

2x S-8U63

3h 30m

2x S-8U93

5h

LC-D420

4-ch Multi-type DV Battery Charger

LC-D420 DC 8.4V, 2AĂ&#x2014;4ch simultaneous charging, Multiple plates exchangeable

LC-D420

4-ch Multi-type DV Battery Charger

LC-D420F:

4x SONY NP-F: S-8972/8970

LC-D420D:

4x Panasonic VBD/VBR: S-8D98/8D58/8D62

LC-D420B:

4x Panasonic VBG: S-8BG6

LC-D420C:

4x Canon BP: S-8845/8945

LC-D420i:

4x JVC SSL: S-8i50/8i75

Customers can purchase plates as they wish for mix using.

4

Broadcast/Film Monitor

FM-17

17.3â&#x20AC;? FHD Portable Film Monitor Development Background A cost effective monitor is always welcome.

This is a 17.3â&#x20AC;? full HD monitor with new designed, specially for film set monitoring, and offer an attractive price to users, while with no compromised on display quality.

FM-17

17.3” FHD Portable Film Monitor LCD Display 17.3” 1080

1920

17.3 inches 1920x1080 resolution 300nit, 700:1 contrast 178°H/V viewing angle

FM-17

17.3â&#x20AC;? FHD Portable Film Monitor Interfaces 3G/HD/SD-SDI 2-in 1-out HDMI 1.3 1-in CVBS 1-in Analog audio 1-in 1-out RS485 1-in, USB 1-in AC IN; DC 11-17V IN

FM-17

17.3â&#x20AC;? FHD Portable Film Monitor Features Waveform / Vector / Histogram 16-ch Audio meter / Timecode Peaking / Focus assist / Exposure assist Zebra / Blue only / Markers / Multi De-log LUTs 120 Internal SDR/HDR LUTs 32 User LUT upload by USB Disk

FM-17

17.3â&#x20AC;? FHD Portable Film Monitor Installation Provide brackets to Set-up by lighting tripod

FM-21HDR 21.5â&#x20AC;? FHD High-Bright HDR Film Monitor Development Background For outdoor film set monitoring, a high bright big monitor is useful obviously.

So in the FM (Film Monitor) series, this 21.5â&#x20AC;? is a high bright version, and high brightness can result HDR. With HLGHDR compatibility, the FM-21HDR can display amazing HDR image.

FM-21HDR 21.5” FHD High-Bright HDR Film Monitor LCD Display 21.5 inches 1920x1080 resolution 1000nit, 1000:1 contrast 178°H/V viewing angle

FM-21HDR 21.5â&#x20AC;? FHD High-Bright HDR Film Monitor Interfaces 3G/HD/SD-SDI 2-in 1-out HDMI 1.3 1-in CVBS 1-in Analog audio 1-in 1-out RS485 1-in, USB 1-in AC IN; DC 11-17V IN

FM-21HDR 21.5â&#x20AC;? FHD High-Bright HDR Film Monitor Features HDR Capability HLG HDR under 1000nit high bright LCD.

FM-21HDR 21.5â&#x20AC;? FHD High-Bright HDR Film Monitor Features Waveform / Vector / Histogram 16-ch Audio meter / Timecode Peaking / Focus assist / Exposure assist Zebra / Blue only / Markers / Multi De-log LUTs / 16 User LUT upload

FM-21HDR 21.5â&#x20AC;? FHD High-Bright HDR Film Monitor Installation Provide brackets to Set-up by lighting tripod

FM-24DCI

24â&#x20AC;? FHD DCI Gamut Production Monitor Development Background The film production is based on DCI-P3 color gamut, so a monitor supports DCIP3 is quite necessary for Colorist during post production.

The FM-24DCI monitor adopts a high quality LCD panel and display DCI-P3 color gamut for film production.

FM-24DCI

24â&#x20AC;? FHD DCI Gamut Production Monitor Color gamut DCI = Digital Cinema Initiatives FM-24DCI supports DCI-P3 color gamut for Digital Film post production, which is wider than Rec 709 that for Broadcasters.

FM-24DCI

24” FHD DCI Gamut Production Monitor LCD Display 24 inches 1920x1200 resolution 10-bit 1.073G Over DCI P3 Color Gamut 250nit, 1000:1 contrast 178°H/V viewing angle

FM-24DCI

24” FHD DCI Gamut Production Monitor Interfaces 3G/HD/SD-SDI 2-in 2-out HDMI 1.3 1-in DC out: USB 2-out 5V 1A DC out: LEMO 12V 1.5A AC IN; DC 12-16.8V IN

FM-24DCI

24â&#x20AC;? FHD DCI Gamut Production Monitor Features Waveform / Vector scope 16-ch Audio meter / Closed Caption Focus assist / Exposure assist SDI 1/2 Picture-By-Picture Multi De-log LUTs 33 points precious 3DLUT processing User LUT with Pre-loaded Film look LUTs

RM-40Fx4

4x 4.3” Rack Monitor

4x 4.3” LCDs

800x480 resolution 300nit, 400:1, H/V 170° 8-bit 16.77M color LCD 19-inch 2U rack size

RM-40Fx4

4x 4.3â&#x20AC;? Rack Monitor

Interfaces

3G/HD/SD-SDI or CVBS 1in-1out RS485 UMD 1in-1out Ethernet 1in GPI (TALLY) 1in

RM-40Fx4

4x 4.3â&#x20AC;? Rack Monitor Main Features 16-ch audio meters Waveform / Vector - Full screen Closed Caption H/V delay, Blue Only, IMD, etc.

Enjoy our innovation SWIT Electronics Europe GmbH