Catalogo Network Electronics 2006/2007

Page 1

Product Catalogue 2006–2007

routing, signal processing and optical transport

network-electronics.com


Simplicity rules

Network Electronics will be the best partner for signal transport needs to the professional video and broadcast industry. Network Electronics serves the professional video and broadcast industry by setting new standards in routing, signal processing and optical transport. With a focus on the future, and a thorough understanding of immediate needs, our products are a combination of reliable, efficient and practical solutions for the transport of audio, video and datacom signals. Our world wide Network offers prompt delivery to where you are now, and where you want to be.

ISO 9001

RoHS

Network Electronics ASA is ISO 9001:2000 certified.

RoHS – the Restriction of the use of certain Hazardous Substances in electrical and electronic equipment is an EU directive banning electrical and electronic equipment containing more than agreed level of certain hazardous substances from 1 July 2006. It is very important that manufacturers show commitment to the outside environment, and many customers, even outside Europe, ask for RoHS compliance at tender stage.

ISO 9001 Certified

o

m Ne k

r Ce

tific ion at

NORWEGIAN ACCREDITATION QUAL 001

Certificate no. 900752

The ISO 9001:2000 certification of Network Electronics ASA’s systems and internal routines is a proof of our commitment to steadfast quality improvement throughout the organisation. In today’s demanding business environment, this is an important certification both for the manufacturer and even more important for demanding customers who do not want to spend time auditing suppliers. As part of the ISO 9001:2000 certification, an independent accredited board will carry out annual audits of the company’s systems and routines.

Both Network Electronics ASA’s product lines VikinX and Flashlink are compliant with the requirements of Directive 2002/95/EC on the Restriction of the use of certain Hazardous Substances (RoHS).

WEEE One of the challenges in the world is the growing amounts of Electronic Equipment (EE) waste that is not sorted and treated properly. Network Electronics ASA has implemented return facilities for all products that we bring to market. Network Electronics ASA is fully compliant with the requirements of Directive 2002/96/EC on the Waste Electrical and Electronic Equipment (WEEE).

| network-electronics.com


RECENT awards Network garnered a first place Engineering Excellence Award from the readers of Broadcast Engineering in the New studio technology – nonbroadcast: category for supplying Louisiana State University’s 150,000 sq-ft Football Operations Centre with a robust routing system specifically designed to bridge the gap between component and composite gear and an SDI format. The Company’s inventive spirit was acknowledged with a STAR award from TV Technology for the revolutionary Sublime ­ SL-3GHD – the world’s first routing switcher for 3 Gbps Single Link HD. Part of the new VikinX Sublime range, the router addresses the need for 3Gbps 1080p single link HD video. Network’s SDI-IP-GTW SDI to IP Gateway which provides an IPTV gateway solution for the transmission of uncompressed SDI over IP networks was given the BE PICK HIT award. The SDI-IP-GTW allows the real-time contribution and distribution of SDI over Wide Area Networks (WAN) where access to dark fibre or wavelengths is limited.

network-electronics.com

|


Routing, signal processing and optical transport Network Electronics has established itself as one of the world leaders in routing, signal processing and optical transport to the professional broadcast industry. Our VikinX routers are now in use world wide in studios, post production houses and outside broadcast facilities, while our Flashlink range of products are used in applications ranging from small in-house signal conversions up to country-wide distribution networks.

Founded in 1996, Network Electronics maintains headquarters in the seaside town of Sandefjord, Norway and operates offices throughout the world. Our products have won several prestigious awards and are characterized by their ease of use, high reliability and competitive pricing.

Odbjørn Bergem, CEO

| network-electronics.com


World Wide Reach Network Electronics is represented through 17 Network country offices and hundreds of distributors, representation offices and resellers throughout the world. All staff is trained and motivated to provide you with top quality service and support.

A global brand needs global coverage; we are ready and able to help you at all these locations…

Our world wide «Network» offers prompt delivery to where you are now, and where you want to be. For further information: www.network-electronics.com.

Network HQ in Norway Network owned offices US owned Regional offices Network franchised offices Distributors More than 300 sub-distributors and system integrators

network-electronics.com

|


The Concept Since the conception of Network Electronics we have prided ourselves on philosophy that has been applied to our products and business beliefs.

Vikinx Our product portfolios, Vikinx and Flashlink have set new industry standards and achieved many awards constantly each year. The Vikinx products is our routing range and has three different entry points … With innovative and well built routers we are keeping up demand and technology while introducing the three entry points for our customers, the Sublime series provide the next level solution and incorporates all the latest technology and leads all manufactures into the next decade with the first produced 3G router. The Flexible Modular series will see this product extended to the 256x256 level using the same technology used in the 128 size router by using the same cross point cards, same power supplies and the same system controller cards, that’s smart thinking! … and the industry standard Compact series which has been the steadfast work router for all entry point and top end broadcaster for some 10 years now.

Modular

Sublime

Compact

Broadcast and Telco formats covered in our routing products: 3GHD, HD, SDI, AES, ­Analogue Video & Audio, Time code, RS422, 34/45 Mbits, 140-155 Mbits and G703.

All this plus a complete range of control panels, control software and configuration software to make the most complex system simple. The complete range for all routing solutions and again a trusted partner when it comes to routing.

Simplicity rules … Reliability and maintenance free, Easy operation and a support service second to none

| network-electronics.com


Flashlink The Flashlink product covers all processing and distribution equipment and the Fibre optic domain and comes with several innovative housing solutions. The processing and distribution products are capturing market prominence with a complete line of products that will do the job that they are intended for, simply and straight forward and maintenance free with a technical passion that makes this range stand out among the field. It could be simply Video or Audio distribution or change over switching or frame synchronisers, what ever your product desires we can satisfy your wishes. Network is known for being well engineered, simple for the user and ultra reliable with a cost performance advantage. For many years the flashlink fibre range of products have lead the industry and has become the industry standard for fibre transport system in the broadcast and transport arenas.

Synchronisation, Delay, Multiplexing, Converters, Distribution amplifiers, change over switching

HD, SD, AES, Analogue Video and Audio, 10/100 Base & Gbit Ethernet, RS422, GPIO, LBand, TDM SDI, SDH/ SONET Up to SDM16/OC-48, DVB-ASI, Fibre Channel, IP Transport systems for Video, 3R Regeneration & many others

From a simple one channel fibre system up to 40 channels of uncompressed data or broadcast signal formats on the one fibre, Flashlink is known world wide for their innovative transport system and control system possibilities including SNMP on all products.

We have products to suit semiprofessional to large Broadcasters and Signal transport companies at a price to suit everyone.

network-electronics.com

|


VikinX Routers Since its introduction in 1996, the VikinX Compact range has dominated the marketplace through its simplicity, reliability and affordability. Today the product is one of the most deployed routing switchers in the world.

Reliability The range was followed by VikinX Modular, a range of modular routing products that has been built with reliability and affordability as the most important design criteria. The reliability of the router, due to fully redundant control architecture and extremely low power consumption are the major reasons why the VikinX Modular product can be found in the most mission critical applications.

Unmatched flexibility Another reason is the unmatched flexibility of the VikinX Modular control system, offering control features far beyond other comparable routing systems. As the only system available with full TCP/IP interconnectivity, VikinX Modular reduces the capital expenses necessary to install the system down to a minimum. Reliability through design simplicity as well as easy to operate user interfaces keep the operational expenses at a low level, thus resulting in low cost of ownership. When adding the 256x256 VikinX Modular in 2006, the line of modular routing products offers a wide range of different frame sizes and signal formats covered.

VikinX Sublime At NAB 2006 we added VikinX Sublime to the VikinX range of routers, marking a new era in

small and medium sized routing. The VikinX Sublime range offers the broadcast market the most extensive range of matrix sizes available (8x8 to 64x64 and 128x2) and covers signal formats from analog video/audio to HDTV also incorporating 1080p 3Gbps Single Link HD. In addition, VikinX Sublime provides many of the powerful control features that drove the VikinX Modular range to success. VikinX Sublime offers flexible routing solutions for general purpose facilities and on-air routing as well as mobile outside broadcast applications and sophisticated A/V applications.

Simplicity Rules Network Electronics’ slogan applies also to the company’s software tools developed to eliminate the obstacles installers and operators face when setting-up and configuring complex routing solutions. One of the latest examples for easy-to-use software is the VikinX System Configurator that accommodates wizards and convenient drag & drop menus comfortably guiding the operator through the installation process. Together with Network Electronics’ proven routing hardware, the control system with all its control panel options and software features provides probably the most comprehensive and reliable routing switcher products in the business.


VIKINX ROUTERS

VikinX Sublime

1

Marking a new era

In 2006 we introduced VikinX Sublime, built to continue our leadership in the market for small and medium routing applications. VikinX Sublime raises the standard for reliability, affordability and comfort in its segment. VikinX Sublime offers the broadcast industry the most extensive range of matrix sizes available (8x8 to 64x64 and 16x2 to 128x2) and covers signal formats from analogue video/au¬dio to HDTV. The SMPTE-292 HD products pro¬vide support for 3Gbps dual link standard. A full range of 3Gbps single link HD products is avail¬able, underscoring our commitment to offer a future-proof range of products. The VikinX Sublime 2RU (32x32) and 4RU (64x64) frames offer mix and match of various signal formats within the same frame, thus allowing to tailor your routing switcher to your application. Flexible control solutions accommodate local and remote panels equipped with professional Broadcast type buttons. VikinX Sublime provides many of the powerful control features that made the VikinX Modular range to a success story. Control options as serial control RS232/422, IP/Ethernet and SNMP make the Sublime range fitting into any application from small production facilities into large networks with centralized management. Third party

interface options allow the integration of Sublime into existing routing installations. VikinX Sublime offers flexible routing solutions for general purpose facility and on-air routing as well as mobile out¬side broadcast applications and sophisticated A/V applications.

Key features

• Analogue video/audio, AES, SD-SDI, E4, STM-1 from 8x8 to 64x64 • Multiformat HD-SDI from 8x8 to 64x64 with support for 3Gbps Dual Link HD • Single Link 3Gbps HD 8x8 to 16x16 • Non-square matrix sizes 32x4, 64x8, 128x2 • Re-clocking and non-reclocking SDI and HD-SDI • Mix and match multiple signal formats combined in one frame (2RU and 4RU frame) • Control via IP/Ethernet, RS-232/422, Network Control Bus (NCB), SNMP • Space saving 5cm (2in) frame depth allowing front and rear rack mount • Flexible matrix partitioning • Flexible local and external control panels with professional Broadcast type buttons • Programmable button configuration • External control panels providing multipurpose GPI/GPO • Ultra-low power, high-reliability design • Dual DC power inlet • Redundant power supplies (brick or frame) with front indicators • Signal diagnostics (signal presence, re-clocking, EDH) • Seamless interoperability with VikinX Modular range of routers • Sync with loop-through, tri-level on HD routers • Mounting trays for brick power supply

network-electronics.com

|


VIKINX SUBLIME

1.1 Analogue Video SL-V1616

SL-V0808

16x16

8x8

Specifications Frequency response 0–125MHz –3dB Differential gain 0.1% (3.58/4.43MHz) Differential phase 0.1° (3.58/4.43MHz) Crosstalk < -60dB (3.58/4.43MHz) Video S/N Ratio typ. 70dB, unweighted Bar tilt < 0.1% Lum. non-linearity < 0.1% Number of inputs 16 termination with jumpers Number of outputs 16 Impedance 75 ohm Return loss typ. 40dB @ 10MHz Max signal 2Vp-p Coupling DC DC offset < 15mV Connector BNC AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x44x50 mm (19”, 1RU)

Also available with X-Y Control Panel integrated in the front (SL-V1616-CP)

10 | network-electronics.com

Specifications Frequency response 0–125MHz –3dB Differential gain 0.1% (3.58/4.43MHz) Differential phase 0.1° (3.58/4.43MHz) Crosstalk < -60dB (3.58/4.43MHz) Video S/N Ratio typ. 70dB, unweighted Bar tilt < 0.1% Lum. non-linearity < 0.1% Number of inputs 8 terminated Number of outputs 8 Impedance 75 ohm Return loss typ. 40dB @ 10MHz Max signal 2Vp-p Coupling DC DC offset < 15mV Connector BNC AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x44x50 mm (19”, 1RU)

Also available with X-Y Control Panel integrated in the front (SL-V0808-CP)


VIKINX SUBLIME

Analogue Video

1.1

SL-V1602

16x2

• Expandable up to 128x2

Specifications Frequency response 0–125MHz –3dB Differential gain 0.1% (3.58/4.43MHz) Differential phase 0.1° (3.58/4.43MHz) Crosstalk < -60dB (3.58/4.43MHz) Video S/N Ratio typ. 70dB, unweighted Bar tilt < 0.1% Lum. non-linearity < 0.1% Number of inputs 16 switchable termination Number of outputs 2 with 2 BNC each Impedance 75 ohm Return loss typ. 40dB @ 10MHz Max signal 2Vp-p Coupling DC DC offset < 15mV Connector BNC AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x44x50 mm (19”, 1RU)

Also available with X-Y Control Panel integrated in the front (SL-V1602-CP)

network-electronics.com

| 11


VIKINX SUBLIME

1.1 Analogue Audio SL-A1616

SL-A0808

16x16

8x8

Specifications Frequency response Crosstalk THD+N

20Hz–20kHz ± 0.1dB < –100dB < 0.01% @ +6dBu < 0.01% @ +22dBu Number of inputs 16 (Stereo) electronically balanced Input impedance > 10 kohm CMRR > 60dB Number of outputs 16 (Stereo) electronically balanced Output impedance < 66ohm Audio connector DB25 female AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x44x50 mm (19”, 1RU)

Also available with X-Y Control Panel integrated in the front (SL-A1616-CP)

12 | network-electronics.com

Specifications Frequency response Crosstalk THD+N

20Hz–20kHz ± 0.1dB < –100dB < 0.01% @ +6dBu < 0.01% @ +22dBu Number of inputs 8 (Stereo) electronically balanced Input impedance > 10 kohm CMRR > 60dB Number of outputs 8 (Stereo) electronically balanced Output impedance < 66ohm Audio connector DB25 female AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x44x50 mm (19”, 1RU)

Also available with X-Y Control Panel integrated in the front (SL-A0808-CP)


VIKINX SUBLIME

Analogue Audio

1.1

SL-A1602

16x2

• Expandable up to 128x2

Specifications Frequency response Crosstalk THD+N

20Hz–20kHz ± 0.1dB < –100dB < 0.01% @ +6dBu < 0.01% @ +22dBu Number of inputs 16 (Stereo) electronically balanced Input impedance > 10 kohm CMRR > 60dB Number of outputs 2 (stereo) electronically balanced Output impedance < 66ohm Audio connector DB25 female AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x44x50 mm (19”, 1RU)

Also available with X-Y Control Panel integrated in the front (SL-A1602-CP)

network-electronics.com

| 13


VIKINX SUBLIME

1.1 Digital Video SL-SD1616N

SL-SD0808N

16x16

8x8

Specifications Data rate NRZ Reference input

143Mbps–540Mbps Comp. Video 1Vpp, 300mV sync, 75 ohm Number of inputs 16 terminated Equalisation Automatic up to 300m (Belden 8281) Number of outputs 16 Re-clocking On R-versions only Impedance 75 ohm Return-loss in/out > 15dB (5MHz–540MHz) Signal level nom. 800mVp–p ±10% Rise/fall time typ. 700ps Connector BNC AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x44x50 mm (19”, 1RU)

Specifications Data rate NRZ Reference input

143Mbps–540Mbps Comp. Video 1Vpp, 300mV sync, 75 ohm Number of inputs 8 terminated Equalisation Automatic up to 300m (Belden 8281) Number of outputs 8 Re-clocking On R-versions only Impedance 75 ohm Return-loss in/out > 15dB (5MHz–540MHz) Signal level nom. 800mVp–p ±10% Rise/fall time typ. 700ps Connector BNC AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x44x50 mm (19”, 1RU)

Also available as SL-SD1616R with re-clocking

Also available as SL-SD0808R with re-clocking

Also available with X-Y Control Panel integrated in the front (SL-SD1616N-CP and SL-SD1616R-CP (with re-clocking))

Also available with X-Y Control Panel integrated in the front (SL-SD0808N-CP and SL-SD0808R-CP (with re-clocking))

14 | network-electronics.com


VIKINX SUBLIME

Digital Video

1.1

SL-SD1602R

16x2

• Expandable Up to 64x2 • Legendable buttons • Input Equalisation

Specifications Data rate NRZ Reference input

143Mbps–540Mbps Comp. Video 1Vpp, 300mV sync, 75 ohm Number of inputs 16 Equalisation Automatic up to 300m (Belden 8281) Number of outputs 2 Re-clocking On R-versions only Impedance 75 ohm Return-loss in/out > 15dB (5MHz–540MHz) Signal level nom. 800mVp–p ±10% Rise/fall time typ. 700ps Connector BNC AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x44x50 mm (19”, 1RU)

Also available with X-Y Control Panel integrated in the front (SL-SD1602R-CP)

network-electronics.com

| 15


VIKINX SUBLIME

1.1 HD Digital Video SL-HD1616n

SL-HD0808N

16x16

8x8

Specifications Data rate NRZ 143Mbps–1.485Gbps Reference input NTSC or PAL Black Burst or HD Tri-Level according to SMPTE 274M, SMPTE 276M Number of inputs 16 terminated Equalisation Automatic up to 100m (Belden 8281) Number of outputs 16 Re-clocking On R-versions only Impedance 75 ohm Return-loss in/out > 15dB (5MHz-1.485GHz) Signal level nom. 800mVp-p ±10% Rise/fall time < 270ps Connector BNC AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x44x50 mm (19”, 1RU)

Specifications Data rate NRZ 143Mbps–1.485Gbps Reference input NTSC or PAL Black Burst or HD Tri-Level according to SMPTE 274M, SMPTE 276M Number of inputs 8 terminated Equalisation Automatic up to 100m (Belden 8281) Number of outputs 8 Re-clocking On R-versions only Impedance 75 ohm Return-loss in/out > 15dB (5MHz-1.485GHz) Signal level nom. 800mVp-p ±10% Rise/fall time < 270ps Connector BNC AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x44x50 mm (19”, 1RU)

Also available as SL-SD1616R with re-clocking

Also available as SL-SD0808R with re-clocking

Also available with X-Y Control Panel integrated in the front (SL-SD1616N-CP and SL-SD1616R-CP (with re-clocking))

Also available with X-Y Control Panel integrated in the front (SL-SD0808N-CP and SL-SD0808R-CP (with re-clocking))

16 | network-electronics.com


VIKINX SUBLIME

HD Digital Video

1.1

SL-HD1602R

16x2

Specifications Data rate NRZ 143Mbps–1.485Gbps Reference input NTSC or PAL Black Burst or HD Tri-Level according to SMPTE 274M, SMPTE 276M Number of inputs 16 Equalisation Automatic up to 100m (Belden 8281) Number of outputs 2 Re-clocking On R-versions only Impedance 75 ohm Return-loss in/out > 15dB (5MHz-1.485GHz) Signal level nom. 800mVp-p ±10% Rise/fall time < 270ps Connector BNC AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x44x50 mm (19”, 1RU)

Also available with X-Y Control Panel integrated in the front (SL-SD1602R-CP)

network-electronics.com

| 17


VIKINX SUBLIME

1.1 Digital Audio SL-AD1616-110

SL-AD0808-110

16x16

8x8

Specifications Signal type AES/EBU digital audio (Stereo) Number of inputs 16 transformer balanced Input impedance 110 ohm Number of outputs 16 transformer balanced Output impedance 110 ohm Jitter < 0.025UI Signal level 0.2 – 7Vp-p Sampling rates 32 – 96kHz Switching mode Asynchronous Audio connector DB25 female AC power External power supply 100–260VAC DC power +15V, connector DB9 male Dimensions 483x44x50 mm (19”, 1RU)

Specifications Signal type AES/EBU digital audio (Stereo) Number of inputs 8 transformer balanced Input impedance 110 ohm Number of outputs 8 transformer balanced Output impedance 110 ohm Jitter < 0.025UI Signal level 0.2 – 7Vp-p Sampling rates 32 – 96kHz Switching mode Asynchronous Audio connector DB25 female AC power External power supply 100–260VAC DC power +15V, connector DB9 male Dimensions 483x44x50 mm (19”, 1RU)

Also available as unbalansed 75 ohm (SL-AD1616-75)

Also available as unbalansed 75 ohm (SL-AD0808-75)

Also available with X-Y Control Panel integrated in the front (SL-AD1616-110-CP and SL-AD1616-75-CP)

Also available with X-Y Control Panel integrated in the front (SL-AD0808-110-CP and SL-AD0808-75-CP)

18 | network-electronics.com


VIKINX SUBLIME

Digital Audio

1.1

SL-AD1602-110

16x2

• Expandable up to 64x2 • Legendable buttons • Balansed In/Outputs

Specifications Signal type AES/EBU digital audio (Stereo) Number of inputs 16 transformer balanced Input impedance 110 ohm Number of outputs 2 transformer balanced Output impedance 110 ohm Jitter < 0.025UI Signal level 0.2 – 7Vp-p Sampling rates 32 – 96kHz Switching mode Asynchronous Audio connector DB25 female AC power External power supply 100–260VAC DC power +15V, connector DB9 male Dimensions 483x44x50 mm (19”, 1RU)

Also available as unbalansed 75 ohm (SL-AD1602-75)

Also available with X-Y Control Panel integrated in the front (SL-AD1602-75-CP)

network-electronics.com

| 19


VIKINX SUBLIME

1.1 Telecom SL-T1616

SL-T0808

SL-T1616

SL-T0808

• 34Mbps or 45Mbps Data rate • Output-Reclocking • Meets ITU-T G.703 for HDB3 signals

• 34Mbps or 45Mbps Data rate • Output-Reclocking • Meets ITU-T G.703 for HDB3 signals

Specifications Data rate 140Mbps/155Mbps G.703 CMI Number of inputs 16 terminated Equalisation Automatic up to 250m (Belden 8281) Number of outputs 16 Impedance 75 ohm Return-loss > 15dB (7–240MHz) Signal level 1000mV fixed on 75 ohm load Connector BNC AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x44x50mm (19”, 1RU)

Specifications Data rate 140Mbps/155Mbps G.703 CMI Number of inputs 8 terminated Equalisation Automatic up to 250m (Belden 8281) Number of outputs 8 Impedance 75 ohm Return-loss > 15dB (7–240MHz) Signal level 1000mV fixed on 75 ohm load Connector BNC AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x44x50mm (19”, 1RU)

Also available with X-Y Control Panel integrated in the front (SL-T1616CP)

20 | network-electronics.com

Also available with X-Y Control Panel integrated in the front (SL-T0808-CP)


VIKINX SUBLIME

RS-422 Data

1.1

SL-D32P

SL-D32P

Specifications Data rate 5Mbps Connector DB9 female AC Power External power supply 100–260VAC DC Power +5V, connector DB9 male Dimensions 483x88x50 mm (19”, 2RU)

network-electronics.com

| 21


VIKINX SUBLIME

1.1 Sublime Accessories

SL-PWR-40 40W Power Supply for VikinX Sublime series of routers

SL-MT-2PSU 1 RU tray for 2x SL-PWR-40, to be placed behind Sublime router

SL-MT-BP Blindplate for 2 positions of SL-MT-6PSU SL-MT-6PSU 1 RU mounting tray for 6x SL-PWR-40

DB25Pin Adaptor Small print-card with DB25 to screw-terminal

3mxXLRF-25PIN DB25pin XLRF, 3 meter cable

22 | network-electronics.com

3mxXLRM-25PIN DB25pin XLRM, 3 meter cable


VIKINX SUBLIME

1.1

network-electronics.com

| 23


VIKINX MODULAR

1.2 Modular Frames

Widest range of signal formats

TCP/IP Interconnectivity

Network Electronics’ VikinX family of modular routers accommodates the widest range of signal formats, including HD-SDI, SD-SDI, analogue audio, AES/EBU audio and telecom. Most of these signals can all be mixed in the same frame.

All VikinX Modular devices provide TCP/IP interconnectivity, an ideal way of operating a routing system from remote sites, independent of whether those are within a campus or on another continent.

Independent of signal format, all components are front loaded and hot-swappable. VikinX Modular allows configurations up to 256 x 256 with increments of 32 x 32.

Bridge Line Concept With the 256x256 VikinX Modular router Network Electronics introduces the Bridge Line Concept providing a 16 signal wide bus, allowing to route any signal in the router through Flashlink signal processing and fibreoptic devices that can be placed in dedicated slots in the router. Bridge-lines make it possible to internally switch line or frame-synchronisers, A/D and D/A converters or fibreoptical interfaces into the signal path, thus enabling signal error suppression, domain conversion, fibreoptical conversion and trunking.

Vikinx System Configurator Each control panel has its own database containing configuration files for the Software Configurable Keys. New configurations can easily be made using the VikinX System Configurator software tool. With the Expandable Panel Concept, allowing grouping of several panels into one logical control unit and the Customised Surface Design, giving unlimited possibilities in designing user surfaces, the VikinX Modular range of control panels provides one of the most sophisticated router control systems available. All routers can be controlled remotely through PCs, other manufacturers control equipment or Network’s own THOR Windows-based software. New features are continuously added to make the use of the system even more simple and comfortable. The steadily growing number of third party interfaces allows installation of VikinX Modular routers in existing third party systems. Those systems can also be controlled from a VikinX Modular control system including the THOR Windows software in order to obtain all advantages provided by the Network Electronics router control system.

Frame sizes The VikinX Modular series comes in three frames sizes. Physical Dimensions 483w x 400h x 340d (19”, 9RU)

The 5RU series (S) is for routers where space is at a premium and a maximum of 64x64 cross points is needed. Everything is the same for the 9RU (M) series except it has space for up to 128x128 cross points. The 21RU (L) series still uses the same building blocks and provides 256x256 cross points.

Physical Dimensions 483w x 220h x 340d (19”, 5RU)

A simple, elegant router design • High Reliability • Easy Upgrades • Easy Maintenance

24 | network-electronics.com

The fact that identical modules are used for router sizes from 32x32 to 256x256 gives our customers an unique upgrade path.


VIKINX MODULAR

Modular Frames

1.2 Single Board Matrix Design – 32x32 matrix modules

Single Board Matrix Design – 32x32 matrix modules

2 x Sys-Con-SM 2 x Power Supplies 2 x Sys-Con-SM 2 x GYDA-128

2 x Power Supplies

The Simple, Elegant Design • High reliability • Low power consumption • Load sharing power supplies running at very low level • Minimum number of circuit modules • Minimum number of module interconnections • Redundant Fans with plenty of air-space and low noise

Easy Serviceability • No active components on rear panel • All front loading, hot swappable modules • Minimal # of spares to stock • Easy upgrade to larger matrix sizes A Control System Architecture for today’s needs

A router with the complete set of features • Meets all relevant SMPTE specifications • Includes SNMP, Web tools • High level of Redundancy

Simple and familiar interconnect • Works very well for small systems • Works very well for larger arrangements – grow with facility • Supports remote sites extremely well

Features

• 2 Power Supplies – Redundant and load sharing (single PSU included in the router price) • 2 System Controllers SYSCON – System controller for all VikinX modular routing switchers (single SYSCON included in the router price) – Redundant and Dual Level Control with different protocols – Crosspoint Configuration on flash card – Dual Sync Inputs – Simultaneous switching of entire matrix • Built-in monitoring matrix with 1 output per 32x32 block • Internal Bridge Lines for advanced processing and fibre (256x256 only) • SD-SDI, HD-SDI and AES digital audio routing in one frame • Mixed 525/625 operation • Tri-Level Sync • Independent Ethernet and serial ports – Fully Redundant Internal Control Architecture • 2 Status, monitoring, alarming modules GYDA-VX – Optional router control module – Signal diagnostics – Redundant SNMP and Web-based interaction Control Interfaces Serial ports: 2x RS-232/422/485 with standard SysCon-SM 2x RS-232/422/485 with redundant SysCon-SM Connector DB9 female Ethernet ports: 1x 10/100Base-T with standard SysCon-SM 1x 10/100Base-T with redundant SysCon-SM 1x 10/100Base-T with standard GYDA-128 1x 10/100Base-T with redundant GYDA-128 Connector RJ45 Power Supplies AC Range 90-130VAC / 180-254VAC switchable, 50-60Hz, 300W Connector IEC 320, separate input for each power supply DC Range 36-72VDC, 300W Connector Screw terminal Alarm Power Alarm Relay contact closure Connector RJ45 Cooling Type Internal forced air

network-electronics.com

| 25


VIKINX MODULAR

1.2 SD Digital Video VD128128M / VD6464S

Serial Digital Video Routers

VD128128M

VD6464S

Electrical Signal Inputs Standard SMPTE 259M Data Rate 19.4Mbps – 540Mbps Connector 75 ohm BNC female Impedance 75 ohm nominal Return Loss > 15dB (5-540MHz) Cable Equalisation 0 to 300m typical Belden 8281 Electrical Signal Outputs Connector 75 ohm BNC female Signal Level 800mVp-p ±10% Signal Polarity Non-inverting with respect to inputs Impedance 75 ohm nominal Return Loss > 15dB (5-540MHz)

Reference Inputs Number of Inputs

2 standard, both reference signals supplied to both SysCon128 when used in redundant mode Connectors 75 ohm BNC female, loop-thru Return Loss > 40dB (100kHz – 5MHz), >35dB (5-10MHz) Signal Format NTSC or PAL Black Burst or HD Tri-Level acc. to SMPTE 274M, SMPTE 276M Signal Level Nominal 1.0Vp-p Field Selectivity Odd / Random field selectable Timing Range Adjustable in 1 line steps

Alarm Interfaces Card Edge LEDs, RS-232/422/485 with open protocol, SNMP Agent and WEB interface with GYDA-128. Information regarding performance of incoming signal, EDH on each signal path can be presented on one common surveillance and monitoring output.

26 | network-electronics.com


VIKINX MODULAR

HD Digital Video

1.2 HD128128M / HD6464S

High Definition Digital Video Routers

HD128128M

HD6464S

Electrical Signal Inputs Standard SMPTE 292M Data Rate 19.4Mbps – 1485Mbps Connector 75 ohm BNC female Impedance 75 ohm nominal Return Loss > 15dB (5MHz-1.5GHz) Cable Equalisation 0 to 100m typical Belden 1694A Electrical Signal Outputs Connector 75 ohm BNC female Signal Level 800mVp-p ±10% Signal Polarity Non-inverting with respect to inputs Impedance 75 ohm nominal Return Loss > 15dB (5MHz-1.5GHz)

Reference Inputs Number of Inputs

2 standard, both reference signals ­supplied to both SysCon-SM when used in redundant mode Connectors 75 ohm BNC female, loop-thru Return Loss > 40dB (100kHz – 5MHz), >35dB (5-10MHz) Signal Format NTSC or PAL Black Burst or HD Tri-Level acc. to SMPTE 274M, SMPTE 276M Signal Level Nominal 1.0Vp-p Field selectivity Odd / Random field selectable Timing Range Adjustable in 1 line steps

Alarm Interfaces Card Edge LEDs, RS-232/422/485 with open protocol, SNMP Agent and WEB interface with GYDA-128. Information regarding performance of incoming signal, EDH on each signal path can be presented on one common surveillance and monitoring output.

network-electronics.com

| 27


VIKINX MODULAR

1.2 Analogue Audio A128128M / A6464S

Analogue Stereo Audio Routers

Electrical Signal Inputs Type Balanced Connector DB25 female Impedance > 10 kohm CMRR > 60dB Max. level +23dBu Electrical Signal Outputs Type Balanced Connector DB25 female Impedance < 66 ohm CMRR > 40dB Max. level +23dBu Gain adj. 1.0dB (compensation for 600 ohm load)

28 | network-electronics.com

Performance Frequency response Adjacent crosstalk SNR THD+N Click noise

20Hz – 125kHz (-3dB), 20Hz – 20kHz ±0.1dB > 100dB, 20Hz – 20kHz < -90dBu(A) < 0.01% at 6dBu < -50dBu

Alarm Interfaces Card Edge LEDs, RS-232/422/485 with open protocol, SNMP Agent and WEB interface with GYDA-128


VIKINX MODULAR

Digital Audio + Telecom

1.2

AD128128M / AD6464M

Digital Audio, AES/EBU Routers

Electrical Signal Inputs Type Transformer balanced Connector DB25 female Impedance 110 ohm Signal level > 0.2 – 7Vpp Electrical Signal Outputs Type Transformer balanced Connector DB25 female Impedance 110 ohm Performance Sampling rates 32–96kHz Switching mode Asynchronous Jitter Typical 800ps

Reference Inputs Number of Inputs

2 standard, both reference signals ­supplied to both SysCon-128 when used in redundant mode Connectors 75 ohm BNC female, loop-thru Return Loss > 40dB (100kHz – 5MHz), >35dB (5-10MHz) Signal Format NTSC or PAL Black Burst or HD Tri-Level acc. to SMPTE 274M, SMPTE 276M Signal Level Nominal 1.0Vp-p Field selectivity Odd / Random field selectable Timing Range Adjustable in 1 line steps

Alarm Interfaces Card Edge LEDs, RS-232/422/485 with open protocol, SNMP Agent and WEB interface with GYDA-128.

T128128-140/155M / T6464-140/155S

140/155Mbps Telecom Routers

Electrical Signal Inputs Standard ITU G.703 CMI Data Rate 140Mbps / 155Mbps Connector 75 ohm BNC female Impedance 75 ohm nominal Return Loss > 15dB (5-540MHz) Cable Equalisation 0 to 300m typical Belden 8281 Electrical Signal Outputs Connector 75 ohm BNC female Signal Level 1000mVp-p ±10% Signal Polarity Non-inverting with respect to inputs Impedance 75 ohm nominal Return Loss > 15dB (5-540MHz)

Reference Inputs Number of Inputs

2 standard, both reference signals ­supplied to both SysCon-128 when used in redundant mode Connectors 75 ohm BNC female, loop-thru Return Loss > 40dB (100kHz – 5MHz), >35dB (5-10MHz) Signal Format NTSC or PAL Black Burst or HD Tri-Level acc. to SMPTE 274M, SMPTE 276M Signal Level Nominal 1.0Vp-p

Alarm Interfaces Card Edge LEDs, RS-232/422/485 with open protocol, SNMP Agent and WEB interface with GYDA-128.

network-electronics.com

| 29


VIKINX CONTROL

1.3 Modular Control and Monitoring

Along with the broad range of VikinX routing switchers, Network Electronics provides numerous possibilities to either direct or remote control all switching devices. From simple single bus and X-Y control panels for smaller applications to advanced IP control panels, SNMP control and web client for highly flexible large router applications, there is always a control set-up that fits the needs of your application.

Router Controller With the VikinX Modular router controller SYSCON we have taken system security onto new heights. Through our fully redundant control architecture, from the independent control ports on the router to the crosspoint switch controller, we can offer the highest reliability possible in a routing system. The SYSCON control system completely avoids single points of failure, like changeovers, centralized main controllers or similar. SYSCON retains the system database in an easy removable Compact Flash card. SYSCON provides both serial and Ethernet/IP interfaces. The IP interconnectivity allows operating a routing system from remote sites, independent of whether those are within a campus or on another continent. Our intelligent IP control panels automatically obtain the IP address of the redundant SYSCON in case there is an error on the main controller.

SNMP control With the GYDA-VX monitoring and control device we are offering signal diagnostics on a user friendly web interface as well as SNMP control, allowing our routers to be controlled by a Network Management System.

30 | network-electronics.com

Intelligent panels Intelligent panels accommodate features and user interface flexibility that typically require a huge selection of different products. With the VikinX panels you can create an unlimited number of different user interfaces exactly fitting your operational requirements. Each control panel has Software Configurable Keys allowing simple operation like Single Bus or X-Y, but also complex Multi-Level / Multi-Crosspoint operations. The Expandable Panel Concept allows grouping of several panels into one logical control unit. Customised Surface Design is giving unlimited freedom in designing button layouts.

System Configurator Software New panel configurations can easily be made using the VikinX System Configurator software tool, developed to eliminate the obstacles installers and operators face when setting-up and configuring complex routing solutions. The VikinX System Configurator accommodates wizards and convenient drag & drop menus comfortably guiding the operator through the installation process.


VIKINX CONTROL

Modular Control and Monitoring

1.3

Numerous possibilities for both direct and remote control of all components ‌ through the use of panels, PCs, SysCon, GYDA, other manufacturers control equipment and THOR

site

router 1: Video l1

site 2

router 1: Video l1

CP 6: CP MdP

router 2: Video l2

router 2: Video l2

CP 1 (ePC): 2 x CP 16 lCd

CP 1 (ePC): 2 x CP 16 lCd

CP 2 (ePC): 2 x CP MeC

CP 2 (ePC): 2 x CP MeC

router : Video l

router : Video l

CP (ePC): CP MeC and CP 16 lCd

CP : CP 16 lCd

CP : CP 16 lCd

CP 5: CP 16 lCd

CP 5: CP 16 lCd

tHor

additional Control

internet

tHor

site 1 CP 6: CP MdP

router Management system

ETH-CON

Control Panel Configurator

tCP/iP

tHor rd Party Control system Compact routers

CP 1 (ePC): 2 x CP 16 lCd

CP 2 (ePC): 2 x CP MeC network Control Bus

CP (ePC): CP MeC and CP 16 lCd

CP : CP 16 lCd

CP 5: CP 16 lCd

CP 6: CP MdP

For direct control of the VikinX compact routers, Network Electronics has developed a flexible and expandable range of compact panels. For the VikinX modular routers, Network offers a range of IPbased control panels that allows the use of standard Ethernet LAN. To further allow for flexibility, the ETH-CON enables compact routers and control panels to interconnect with the modular control system. Thus the modular control panels can be used to control compact routers and the advanced features of the modular control system are made available for compact routers. The SysCon cards contain the configuration database for the modular routers

and optionally for the panels on an easily replaced Compact Flash card. GYDA-128 gives the modular routing line a comprehensive alarming/surveillance and SNMP control. GYDA-128 is available both as single controller and dual redundant controller. The THOR router management system is a Windowsbased router control system for the VikinX compact and modular router series. THOR offers a wide and modular range of features that provides complete control and multiple configuration options.

network-electronics.com

| 31


VIKINX CONTROL

1.3 Modular Control and Monitoring SysCon-128 / SYSCON-64

GYDA-VX

SYSCON

GYDA

System CPU 400MHz Intel PXA255 StrongARM Memory 64MB SDRAM 8MB Flash

System CPU 400MHz Intel PXA255 StrongARM Memory 64MB SDRAM 8MB Flash

Electrical Interfaces 2 x RS232 or RS422 control ports on DB9F conforming to IBM PC (RS232) or SMTPE207M (RS422) 1 x 10BaseT/100Base-TX fast ethernet, full duplex capable

Electrical Interfaces 1 x 10BaseT/100Base-TX fast ethernet, full duplex capable Power Consumption +5V, typ. 400 mA. Maximum 3W

Power Consumption +5V, typ. 400 mA. Maximum 3W

GYDA-VX

32 | network-electronics.com

• WEB interface tool for router monitoring and control, SNMP Agent. • WEB interface HTTP ver. 1.1, HTML ver. 4.01, compatible with all major browsers, SNMP ver. 3.0, User Based Security Model • Monitoring and control features available on both user interfaces • Signal presence detection on inputs • Reading Re-clocker lock and lock rate 143,177,270,360,540,14 85/1483.5 on all outputs • SysCon Error • EDH Monitoring • Possibility for separated Ethernet connections for monitoring and control


VIKINX CONTROL

Compact Gateway

1.3

TCP/IP interconnectivity for our compact routers plus our line of IP-based control panels provide unparalleled connectivity. Control, configure or monitor your infrastructure from anywhere

Router Management System

ETH-CON

Control Panel Configurator

TCP/IP

THOR 3rd Party Control System Compact Routers

CP 1 (EPC): 2 x CP 16 LCD

CP 2 (EPC): 2 x CP 44 MEC Network Control Bus

CP 3 (EPC): CP 44 MEC and CP 16 LCD

CP 4: CP 16 LCD

CP 5: CP 16 LCD

CP 6: CP MDP

Featuring: SCK – Software Configurable Keys EPC – Expandable Panel Concept CSD – Customised Surface Design

network-electronics.com

| 33


VIKINX CONTROL

1.3 IP-based Control Panels

Expandable Panel Concept

2 x CP 16 LCD interconnected via the EPC bus will logically appear as one panel on the VikinX modular control bus.

CP 16 LCD and CP 44 MEC interconnected via the EPC bus will logically appear as one panel on the VikinX modular control bus.

2 x CP 44 MEC interconnected via the EPC bus will logically appear as one panel on the VikinX modular control bus. CP 44 MEC and CP MDP interconnected via the EPC bus will logically appear as one panel on the VikinX modular control bus.

CP 16 LCD and CP 44 MEC interconnected via the EPC bus will logically appear as one panel on the VikinX modular control bus.

Customised Surface Design All buttons in use…

Extra overlay ready for customising comes with every IP-based Control Panel. The overlay has half stamped holes for the buttons, making it easy to customise. SCK – Software Configurable Keys EPC – Expandable Panel Concept CSD – Customised Surface Design Example of customised panel

CSD (Customised Surface Design) gives you a greater freedom in designing your specific user surface. With CSD you can remove keys that you find unnecessary, create functional blocks, as you need them and still get a professional looking panel.

34 | network-electronics.com


VIKINX CONTROL

IP-based Control Panels

1.3

CP-44-MEC

CP-16LCD

44 Software Configurable Buttons

16 Software Configurable LCD-Buttons

• 34Mbps or 45Mbps Data rate • Output-Reclocking • Meets ITU-T G.703 for HDB3 signals

• 16 software configurable LCD buttons with 36x24 pixels

Control Interfaces Ethernet ports 1x 10/100Base-T Connector RJ45

Control Interfaces Ethernet ports 1x 10/100Base-T Connector RJ45

Power Supplies AC Range 90-254VAC, 50-60Hz, 10W Connector IEC 320 DC Range 36-72VDC, 10W Unit Power Voltage +5V DC Connector DB9 male

Power Supplies AC Range 90-254VAC, 50-60Hz, 10W Connector IEC 320 DC Range 36-72VDC, 10W Unit Power Voltage +5V DC Connector DB9 male

Physical Dimensions 483w x 44h x 45d mm (19”, 1RU)

Physical Dimensions 483w x 44h x 45d mm (19”, 1RU)

• Tri-colour button illumination • TCP/IP LAN panel bus • Expandable Panel Concept (EPC) RS-232 port • 16 GPI ports / 16 GPO ports

network-electronics.com

| 35


VIKINX CONTROL

1.3 IP-based Control Panels CP-MDP-CL

Master Display Panel

• 64 software configurable buttons • Easy exchangeable labelling • 320x240 QVGA display, colour or B/W • Customised Surface Design (CSD) option

Control Interfaces Control Interfaces Ethernet ports 1x 10/100Base-T Connector RJ45 Power Supplies AC Range 90-254VAC, 50-60Hz, 10W Connector IEC 320 DC Range 36-72VDC, 10W Unit Power Voltage +5V DC Connector DB9 male Physical Dimensions 483w x 88h x 45d mm (19”, 2RU)

36 | network-electronics.com


VIKINX CONTROL

Sublime Control Panels

1.3

All Sublime Control Panels: - Ethernet/RS-232/422/NCB control - Programmable - Size: 19inch 1RU, depth 5cm

Multibus X-Y Control Panel For router sizes: 16x16 and 8x8

Dualbus Control Panel For router size: 16x2

Singlebus Control Panel For router sizes: 16x16 and 8x8

Universal Control Panel 40 programmable buttons

network-electronics.com

| 37


VIKINX CONTROL

1.3 Compact Control Panels

Singlebus panels Sizes offered: 8, 16, 32, 64 • A/V Breakaway function • Audio follow video funtion • Legendable buttons • Panel enable function • Take function

Control System • Up to 50 Routers and Control Panels per system • Network Control Bus in all Routers and CPs • RS-232 port in all Routers and CPs • De-centralized control architecture • Local, independant sub-systems • PC/Ethernet/LAN/IP/Remote access possibilities • Open protocol; you may write your own software

Multibus X-Y panels Sizes offered: 8x8, 16x16, 32x32, 64x64 • A/V Breakaway function • Audio follow video funtion • Legendable buttons • Panel enable function • Take function

GPI/Tally/Joystick panels Sizes offered: 8x8, 16x16, 32x32, 64x64 • GPI or joystick operation • GPI-CP with single bus panel • Comprehensive user options • Tally output

Universal, multilevel panel • 2x16 character alphanumeric display • 8 level A/V breakaway control • Panel enable fundtion • Legendable buttons VikinX Compact Control Panels, Reference Guide Router \ CP Singlebus Dualbus Multibus (X-Y) CP-UNI GPI / Tally • Take/salvo function

Joystick (w/CP)

VikinX.1602

(1RU) Remote

(1RU) Rem./Local (1RU) Remote

(1RU) Remote

VikinX.08

(1RU) Remote

(1RU) Remote*

(1RU) Remote/Local (1RU) Remote

(1RU) Remote

VikinX.16

(1RU) Remote

(1RU) Remote*

(1RU) Remote

(1RU) Remote

(1RU) Remote

VikinX.32

(1RU) Remote

(1RU) Remote*

(2RU) Remote

(1RU) Remote

(2RU) Remote

VikinX.64

(2RU) Remote

(1RU) Remote*

(4RU) Remote

(1RU) Remote

(4RU) Remote

(1RU) Remote

(1RU) Remote

CAV8 / CAV16 (1RU) Remote (1RU) Remote* Remote / Local *) Dualbus CP can only control the first 2 outputs.

38 | network-electronics.com

(1RU) Remote


VIKINX CONTROL

VikinX System Configurator

1.3

Powerful new features

Full TCP/IP interconnectivity

The new System Configurator features include: • Unified configuration tool for VikinX Modular, Sublime, ETH-CON & Gyda • Easy system set-up through simple Wizard and Drag & Drop menus • Auto-detecttion of all hardware with listing in main menu • Interactive help menu • Simplicity Rules

VikinX is the only system available with full TCP/IP interconnectivity. The VikinX router range minimises initial investment cost, and operating expenses, resulting in very low cost of ownership.

Eliminate the obstacles

The most comprehensive and reliable routing switcher solutions

Simplicity Rules – Network Electronics’ new slogan applies to the Company’s software tool developed to eliminate the obstacles installers and operators face, when setting-up and configuring complex routing switcher solutions.

Guided installation The new System Configurator provides wizards and convenient drag & drop menus that comfortably guide the operator through the installation process.

Together with Network Electronics’ proven routing hardware VikinX Modular and VikinX Compact, plus the new VikinX Sublime range of routing switchers, the new software solutions provide the most comprehensive and reliable routing switcher solutions in the business.

The new system configurator is made to eliminate the obstacles installers and operators face when settingup and configuring complex routing switcher solutions.

network-electronics.com

| 39


VIKINX CONTROL

1.4 THOR THOR is the Windows-based router control system for the VikinX Modular and Compact router series

• Detect your router system automatically RS232 Network Control Bus

• Control your routers with drag & drop interface • Lock and protect your crosspoints • Switch up to 16 virtual levels simultaneously THOR system requirements:

Ethernet

• WinNT, Win2000, WinXP • Intel Pentium III 500 MHz • 128 MB RAM and 50 MB hard disk space • SVGA video adapter and monitor Ethernet

Ethernet Ethernet

F u nct i o n a l i ty

Basic Standard

Premium TieLine

Feature Pack

C O N T R OL G UI Matrix view

Drag & Drop router control

Virtual Router Mapping (Multilevel control)

Configurable Control GUI

Web control with salvos

TieLines manager

CONTROL FEATURES Crosspoint protection (lock, protect and prohibit)

Salvos

Salvo time scheduling

Categories and Groups

Crosspoint logging

COMMUNICATION FEATURES Single Computer to compact routers (RS232)

Single computer to modular routers (TCP/IP)

Multiple computers on LAN

Remote computer on LAN or modem

3rd party interface (protocol converting)

CONFIGURATION FEATURES Router configuration

Mnemonics and icons

User Management with login

Router size limitation

40 | network-electronics.com

64x64

64x64 NO NO N.A.


VIKINX CONTROL

THOR

1.4

all editions have the following basic functions and configuration possibilities:

Control Functions • Matrix Views • Crosspoint lock and Protection • salvo Configuration • Mnemonics and icons

THOR baSIC EdITION • Router sizes up to 64x64

upgradable

THOR STaNdaRd EdITION • Router sizes up to 64x64 Includes: • Basic Edition • Drag & Drop Router Control • Categories and Groups • Crosspoint Logging • Virtual Router Mapping (Multilevel Switching) • User Management

upgradable

Ext r a f e at u r e s These features are available in THOR if extra control GUI or communication are needed. Some communication features need extra hardware (included in the price).

THOR pREmIUm EdITION • No router size limitation Includes: • Standard Edition • Multiple computers on LAN

upgradable

CONTROL GUI FEATURES Configurable Control GUI

upgradable

Salvo Scheduler WEB Control

THOR TIElINE EdITION

COMMUNICATION FEATURES LAN Multi User Interface Ethernet Interface to VikinX Compact

Hardware adapter

Routers and VikinX Sublime

(RS232 to Ethernet

• No router size limitation • Includes: Premium Edition TieLines Manager

converter) ETH-CON

3rd Party Interface ETH-CON Advanced Remote Control • PC (Modem) to PC (Modem) • PC (Modem) to Device Server Device Server

network-electronics.com

| 41


VIKINX CONTROL

1.4 THOR Control GUI Feature Packs

F Configurable Control GUI

• Graphical Editor for making custom design router control views • Windows Internet Explorer HTML based control interface

Salvo Scheduler E

• Timed salvo takes with salvo scheduler • Advanced reoccurrence options (hourly, daily, weekly and more) • Execute many salvos in a timed sequence with salvo sequence editor

WEB CONTROL E

• Multiplatform web based control interface with salvo switching • THOR main computer must run windows web server

LINUX

ROUTER

Internet / Intranet

MAC

ROUTER

WINDOWS WEB-SERVER

42 | network-electronics.com

WINDOWS


VIKINX CONTROL

THOR

1.4

Communication Feature Packs

Client

Client

Client

F LAN Multi User Interface (Standard Edition only)

tHor

tHor

tHor

• Graphical Editor for making custom design router control views • Windows Internet Explorer HTML based control interface

Master

F 3rd Party Interface

G Ethernet Interface to VikinX Compact aND VikinX Sublime

• We support 3rd party interfaces by protocol converting • Includes ETH-CON as protocol interface

• Direct connection of a VikinX Compact and VikinX Sublime Router with/without panel to Ethernet • Includes hardware adapter • More details on ETH-CON, see page XXX

Client

Advanced Remote Control E

Special router control solutions • PC (Modem) to PC (Modem), remote THOR Client, connect to Master PC (must include LAN Multiuser) • PC (Modem) to Device Server, remote serial port by modem connection

tHor

network-electronics.com

| 43


VIKINX COMPACT

1.4 Small and Medium-sized Routers

Network Electronics’ compact VikinX routers embody the company’s pioneering spirit by providing a ground-breaking price to performance ratio in a feature-rich range. The units’ unparalleled ultra-thin housing was designed to accommodate facilities where real estate is at a premium. Configurations, ranging from 8 x 4 to 64 x 64, address every application from broadcast to corporate to post-production.

PARTITIONING TABLE Router Size (square) FORMAT 64 32 16 08 Composite Video 64x64 32x32 16x16 8x8 Y/C (SVHS) 32x32 16x16 8x8 4x4 RGB/YUV 21x21 10x10 5x5 N/A RGB/sync 16x16 8x8 4x4 2x2 It is possible to reconfigure the switch groups for all routers in the Compact Router Line via the configuration switch on the back-plane to create several formats of routers.

44 | network-electronics.com

Power Supply All VikinX Compact Frame routers are supplied with a single desk-top power supply included in the price.


VIKINX COMPACT

Small and Medium-sized Routers

1.4

ANALOGUE VIDEO

COMPONENT ANALOGUE VIDEO

ANALOGUE AUDIO

DIGITAL VIDEO

HIGH DEFINITION

DIGITAL AUDIO

TELECOM

RS-422 DATA

network-electronics.com

| 45


VIKINX COMPACT

1.4 Analogue Video

• Power down memory • RS-232 Interface • Network Control Bus

46 | network-electronics.com


VIKINX COMPACT

Analogue Video

1.4

V6464

V3232

64x64

32x32

Specifications Frequency response 0-125MHz -3dB Differential gain typ. 0.08% (3.58/4.43MHz) Differential phase typ. 0.08° (3.58/4.43MHz) Crosstalk < -60dB (3.58/4.43MHz) Video S/N Ratio typ.70dB Bar tilt < 0.1% Lum. non-linearity < 0.1% Number of inputs 64 terminated Number of outputs 64 Impedance 75 ohm Return loss typ. 40dB @ 10MHz Max signal 2 Vp-p VIT input 1Vpp, 300mV sync, 75ohm DC offset typ. < 15mV Propagation delay 15ns ± 1ns Coupling DC Connector BNC AC power External power supply 100–260 VAC DC power ±5V, connector DB9 male Dimensions 483x264x100 mm (19”, 6RU)

Specifications Frequency response 0-125MHz -3dB Differential gain typ. 0.06% (3.58/4.43MHz) Differential phase typ. 0.06° (3.58/4.43MHz) Crosstalk < -60dB (3.58/4.43MHz) Video S/N Ratio typ.70dB Bar tilt < 0.1% Lum. non-linearity < 0.1% Number of inputs 32 terminated Number of outputs 32 Impedance 75 ohm Return loss typ. 40dB @ 10MHz Max signal 2 Vp-p VIT input 1Vpp, 300mV sync, 75ohm DC offset typ. < 15mV Propagation delay 9ns ± 1ns Coupling DC Connector BNC AC power External power supply 100–260 VAC DC power ±5V, connector DB9 male Dimensions 483x132x100 mm (19”, 3RU)

network-electronics.com

| 47


VIKINX COMPACT

1.4 Analogue Video V1616

V0808

16x16

8x8

Specifications Frequency response 0-90MHz -3dB Differential gain typ. 0.05% (3.58/4.43MHz) Differential phase typ. 0.05° (3.58/4.43MHz) Crosstalk < -60dB (3.58/4.43MHz) Video S/N Ratio typ. 70dB Bar tilt < 0.1% Lum. non-linearity < 0.1% Number of inputs 16 termination with jumpers Number of outputs 16 Impedance 75 ohm Return loss typ. 40dB @ 10MHz Max signal 2Vp-p Coupling DC DC offset typ. 10mV Propagation delay 8ns ± 1ns Connector BNC AC power External power supply 100–260 VAC DC power ±5V, connector DB9 male Dimensions 483x44x300 mm (19”, 1RU)

Specifications Frequency response 0-110MHz -3dB Differential gain typ. 0.1% (3.58/4.43MHz) Differential phase typ. 0.2° (3.58/4.43MHz) Crosstalk < -55dB (3.58/4.43MHz) Video S/N Ratio typ. 70dB Bar tilt < 0.1% Lum. non-linearity < 0.1% Number of inputs 8 terminated Number of outputs 8 Impedance 75 ohm Return loss typ. 38dB Max signal 2 Vp-p Coupling DC DC offset typ. 5mV Propagation delay 5ns ± 1ns Connector BNC AC power External power supply 100–260VAC DC power ±5V, connector DB9 male Dimensions 483x44x40 mm (19”, 1RU)

Also available with X-Y Control Panel integrated in the front (V0808CP)

48 | network-electronics.com


VIKINX COMPACT

Analogue Video

1.4

V1602

16x2

• Expandable up to 128x2

Specifications Frequency response 0-80MHz -3dB Differential gain typ. 0.08% (3.58/4.43MHz) Differential phase typ. 0.3° (3.58/4.43MHz) Crosstalk < -55dB (4.43MHz) Video S/N Ratio > 68dB Bar tilt < 0.1% Lum. non-linearity < 0.1% Number of inputs 16 switchable termination Number of outputs 2 with 2 BNC each Auxaliary outputs 2 for Router extension Impedance 75 ohm Return loss > 40dB Max signal 2Vp-p Coupling DC DC offset typ. 30mV Propagation delay 7ns ± 1ns Connector BNC AC power External power supply 100–260VAC DC power ±5V, connector DB9 male Dimensions 483x44x45 mm (19”, 1RU)

Also available with X-Y Control Panel integrated in the front (V1602CP)

network-electronics.com

| 49


VIKINX COMPACT

1.4 Component Analogue Video

If our routers were any thinner We could ship them in envelopes

Everything you want in a compact feature-rich design, including: • Seamless tri-step switching • External control system compatibility • Typ. 0–110MHz/-3dB@0dBm input signal • Audio breakaway possible • Up to 1600 x 1200 resolution • Built-in RS232 interface • Built-in professional control panel Available in configurations of RGBHV, plus stereo analogue audio. Sizes include 16x16, 16x8, 8x8, 8x4.

50 | network-electronics.com

Configurations The following formats may be configured (analogue stereo audio and built-in control panel are both optional): 16x16 RGBHV + AA + CP 16x8 RGBHV + AA + CP 8x8 RGBHV + AA + CP 8x4 RGBHV + AA + CP


VIKINX COMPACT

Component Analogue Video

1.4

CAV0808 / CAV0804

CAV1616 / CAV1608

8x8 / 8x4

16x16 / 16x8

Video specifications Number of inputs 8 Number of outputs 8 or 4, depending on model

Video specifications Number of inputs 16 Number of outputs 16 or 8, depending on model

Audio specifications (Optional) Number of inputs 8 (Stereo), true balanced Number of outputs 8 or 4 (Stereo), depending on model, all true balanced

Audio specifications (Optional) Number of inputs 16 (Stereo), true balanced Number of outputs 16 or 8 (Stereo), depending on model, all true balanced

Video specifications Frequency response typical 0–130MHz / -3dB @ 0dBm input signal. Differential gain typical 0.1% (3.58/4.43MHz) Differential phase typical 0.2° (3.58/4.43MHz) Crosstalk < -55dB (3.58/4.43MHz) Video S/N Ratio typical 70dB Bar tilt < 0.1% Lum. Non-linearity < 0.1% Number of inputs 16 Number of outputs 16 or 8, depending on model Impedance 75 ohm Return loss typical 38dB Max signal 2 Vp-p Coupling DC DC offset typ. 5mV Propagation delay 5ns ± 1ns Connector BNC Switching Seamless w/variable delay 2-5s, or VIT, selectable via DIP-switches. PAL/NTSC selection on DIP-switches. VIT loop

Audio specifications (Optional) Frequency response 20Hz-100kHz ± 0.1dB Crosstalk > -100dB Click noise < 60dBu THD+N < 0.003% SNR > 100dB ref. to 0db 20Hz-20kHz Number of inputs 16 (Stereo), true balanced Input impedance > 10k ohm CMRR > 75dB Max. Input level + 25dBu Number of outputs 16 or 8 (Stereo), depending on model, all true balanced Output impedance 66 ohm Connector DB25 female Panel specifications (Optional) Salvos Programmable/executable on panel General AC Power External power supplies 100 – 260 VAC DC Power ±15V, connector DB9 male, equipped with 2x DB9 connectors Max. power consumption <40W Dimensions 483 x 264 x 35 mm (19”, 6RU)

network-electronics.com

| 51


VIKINX COMPACT

1.4 Analogue Audio

• 100kHz Audio Bandwidth • Power down memory • Programmable format • RS-232 Interface • Network Control Bus • Also usable as Time Code router

52 | network-electronics.com


VIKINX COMPACT

Analogue Audio

1.4

A6464

A32x32

64x64

32x32

Specifications Frequency response Crosstalk THD+N SNR

20Hz-100kHz ± 0.1dB > -100dB < 0.005% >100dBr ref. to 0dB 20Hz–20kHz Number of inputs 16 (Stereo) electronically balanced Input impedance > 10 kohm CMRR > 75dB Max. input level + 23dBu Number of outputs 16 (Stereo) electronically balanced Output impedance 66 ohm Audio connector DB25 female AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x44x300 mm (19”, 1RU)

Specifications Frequency response 20Hz-100kHz ±0.1dB Crosstalk > -100dB Clicknoise < 60dBu THD+N < 0.005% SNR > 90dB ref. to 0dB 20Hz-20kHz Number of inputs 32 (Stereo) electronically balanced Input impedance > 10kohm Max input level + 23dBu CMRR > 75dB Number of outputs 32 (Stereo) electronically balanced Output impedance 66 ohm Audio connector DB25 female AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x132x100 mm (19”, 3RU)

A6464 is also available as mono. This unit is called A6464 Mono.

network-electronics.com

| 53


VIKINX COMPACT

1.4 Analogue Audio A1616

A0808

16x16

8x8

Specifications Frequency response Crosstalk THD+N SNR

20Hz-100kHz ± 0.1dB > -100dB < 0.005% >100dBr ref. to 0dB 20Hz–20kHz Number of inputs 16 (Stereo) electronically balanced Input impedance > 10 kohm CMRR > 75dB Max. input level + 23dBu Number of outputs 16 (Stereo) electronically balanced Output impedance 66 ohm Audio connector DB25 female AC power External power supply 100 – 260 VAC DC power ±15V, connector DB9 male Dimensions 483x44x300 mm (19”, 1RU)

Specifications Frequency response Crosstalk THD+N Number of inputs

20Hz-100kHz ± 0.1dB > -100dB < 0.003% 8 (Stereo) electronically balanced Input impedance > 10k ohm CMRR > 75dB Max. input level + 23dBu Number of outputs 8 (Stereo) electronically balanced Output impedance 66 ohm Connector DB25 female AC power External power supply 100–260VAC DC power ±15V, connector DB9 male Dimensions 483x44x40 mm (19”, 1RU)

Also available with X-Y Control Panel integrated in the front (A0808CP)

54 | network-electronics.com


VIKINX COMPACT

Analogue Audio

1.4

A1602

16x2

• Expandable up to 128x2

Specifications Frequency response Crosstalk THD+N SNR

20Hz-100kHz ±0.1dB < 100dB <0.005% <92dB ref. to 0db 20Hz-20Khz Number of inputs 16 (Stereo) electronically balanced Input impedance >10 k ohm CMRR > 75dB Max. input level +23dBu Number of outputs 2 (stereo) electronically balanced Auxaliary outputs 2 for Router extension Output impedance 66 ohm Connector DB25 female AC power External power supply 100–260VAC DC power ±15V, connector DB9 male Dimensions 483x44x45 mm (19”, 1RU)

Also available with X-Y Control Panel integrated in the front (A1602CP)

network-electronics.com

| 55


VIKINX COMPACT

1.4 Digital Video

• D1 4:2:2 270Mbps Component • 143Mbps NTSC Composite • D2 177Mbps PAL Composite • Up to 540Mbps Data rate • Input Equalisation • Network Control Bus • Power down memory • RS-232 Interface • DVB-ASI compatible

56 | network-electronics.com


VIKINX COMPACT

Digital Video

Specifications Data rate NRZ VIT Input

1.4

VD6464

VD32x32

64x64

32x32

143Mbps–540Mbps Comp. Video 1Vpp, 300mV sync, 75ohm Number of inputs 64 terminated Equalisation Automatic up to 300m (Belden 8281) Number of outputs 64 Impedance 75 ohm Return loss in/out > 18dB (10MHz–270MHz) Signal level nom. 800mV Rise/fall time typ. 700ps Connector BNC AC power External power supply 100–260 VAC DC power +5V, connector DB9 male Dimensions 483x264x100 mm (19”, 6RU)

Specifications Data rate NRZ VIT Input

143Mbps–540Mbps Comp. Video 1Vpp, 300mV sync, looped, 75ohm Number of inputs 32 terminated Equalisation Automatic up to 300m (Belden 8281) Number of outputs 32 Impedance 75 ohm Return loss in/out > 18dB (10MHz–270MHz) Signal level nom. 800mV Rise/fall time typ. 700ps Connector BNC AC power External power supply 100–260 VAC DC power +5V, connector DB9 male Dimensions 483x132x100 mm (19”, 3RU)

network-electronics.com

| 57


VIKINX COMPACT

1.4 Digital Video VD1616

VD0808

16x16

8x8

Specifications Data rate NRZ VIT input

143Mbps–360Mbps Comp. Video 1Vpp, 300mV sync, 75 ohm Number of inputs 16 terminated Equalisation Automatic up to 300m (Belden 8281) Number of outputs 16 Re-clocking on outputs (on VD1616-RC version only) Impedance 75 ohm Return-loss in/out > 15dB (10MHz-270MHz) Signal level nom. 800mV Rise/fall time typ. 700ps Connector BNC AC power External power supply 100–260 VAC DC power ±5V, connector DB9 male Dimensions 483x44x300 mm (19”, 1RU)

Also available as VD1616-RC with re-clocking

58 | network-electronics.com

Specifications Data rate NRZ VIT input

143Mbit/s–360Mbps Comp. Video 1Vpp, 300mV sync, 75 ohm Number of inputs 8 terminated Equalisation Automatic up to 300m (Belden 8281) Number of outputs 8 Impedance 75 ohm Return-loss in/out > 15dB (10MHz-270MHz) Signal level nom. 800mV Rise/fall time typ. 700ps Connector BNC AC power External power supply 100–260VAC DC power +5V, connector DB9 male Dimensions 483 x 44 x 45 mm (19”, 1RU)

Also available with X-Y Control Panel integrated in the front (VD0808CP)


VIKINX COMPACT

Digital Video

1.4

VD1602

16x2

• Expandable Up to 64x2 • Legendable buttons • Input Equalisation

Specifications Data rate NRZ VIT input

143Mbit/s–360Mbps Comp. Video 1Vpp, 300mV sync, 75 ohm Number of inputs 8 terminated Equalisation Automatic up to 300m (Belden 8281) Number of outputs 8 Impedance 75 ohm Return-loss in/out > 15dB (10MHz-270MHz) Signal level nom. 800mV Rise/fall time typ. 700ps Connector BNC AC power External power supply 100–260VAC DC power +5V, connector DB9 male Dimensions 483 x 44 x 45 mm (19”, 1RU)

Also available with X-Y Control Panel integrated in the front (VD0808CP)

network-electronics.com

| 59


VIKINX COMPACT

1.4 HD Digital Video HD1616

16x16

Specifications Data rate Video ref. input

• Universal Wideband Technology • Simultaneous Routing from 143Mbps to 1.5Gbps • Passes Pathological SDI and HD-SDI Signals • Automatic Standard Select Re-clocking • Input Equalisation • Network Control Bus / RS232 – RS422 Control

60 | network-electronics.com

143Mbps – 1.5Gbps Comp. Video 1Vpp, 300mV sync, 75 ohm Number of inputs 16 terminated Equalisation Auto up to 100m @ 1.5G (Belden 1694A) Number of outputs 16 Re-clocking On outputs, auto standard select Impedance 75 ohm Return-loss > 15dB (5MHz-1.5GHz) Signal level 800mV ± 10% Connector BNC AC power External power supply 100–260 VAC DC power +5V, connector DB9 male Dimensions 483x88x35 mm (19”, 2RU)


VIKINX COMPACT

HD Digital Video

Specifications Data rate Video ref. input

1.4

HD0808

HD1602

8x8

16x2

143Mbps – 1.5Gbps Comp. Video 1Vp-p, 300mV sync, 75 ohm Number of inputs 8 terminated Equalisation Auto up to 100m @ 1.5G (Belden 1694A) Number of outputs 8 Re-clocking On outputs, auto standard select Impedance 75 ohm Return-loss > 15dB (5MHz-1.5GHz) Signal level 800mV ± 10% Connector BNC AC power External power supply 100–260 VAC DC power +5V, connector DB9 male Dimensions 483x88x35 mm (19”, 2RU)

Specifications Data rate Video ref. input

143Mbps – 1.5Gbps Comp. Video 1Vpp, 300mV sync, 75 ohm Number of inputs 16 terminated Equalisation Auto up to 100m @ 1.5G (Belden 1694A) Number of outputs 2 Re-clocking On outputs, auto standard select Impedance 75 ohm Return-loss > 15dB (5MHz-1.5GHz) Signal level 800mV ± 10% Connector BNC AC power External power supply 100–260 VAC DC power +5V, connector DB9 male Dimensions 483x88x35 mm (19”, 2RU)

network-electronics.com

| 61


VIKINX COMPACT

1.4 Digital Audio

• 110 ohm balanced in- and outputs • 96kHz compatible • Sampling rates 32–96kHz • Power Down Memory • Programmable format • Network Control Bus • RS-232 Interface

62 | network-electronics.com


VIKINX COMPACT

Digital Audio

1.4

AD6464-110

AD3232-110

64x64

32x32

Specifications Signal type AES/EBU digital audio Number of inputs 64 transformer balanced Input impedance 110 ohm Number of outputs 64 transformer balanced Output impedance 110 ohm Jitter 800ps Delay 170ns Signal level 0.2 – 7Vpp Sampling rates 32 – 96kHz Switching mode Asynchronous Audio connector DB25 female AC power External power supply 100 or 260 VAC DC power +5V, connector DB9 male Dimensions 483x132x100 mm (19”, 3RU)

Also available as unbalanced 75 ohm (AD6464-75)

Specifications Signal type AES/EBU digital audio Number of inputs 32 transformer balanced Input impedance 110 ohm Number of outputs 32 transformer balanced Output impedance 110 ohm Jitter 800ps Delay 170ns Signal level 0.2 – 7Vpp Sampling rates 32 – 96kHz Switching mode Asynchronous Audio connector DB25 female AC power External power supply 100 or 260 VAC DC power +5V, connector DB9 male Dimensions 483x132x100 mm (19”, 3RU)

Also available as unbalanced 75 ohm (AD3232-75)

network-electronics.com

| 63


VIKINX COMPACT

1.4 Digital Audio AD1616-110

AD0808-110

16x16

8x8

Specifications Data rate NRZ VIT input

143Mbps–360Mbps Comp. Video 1Vpp, 300mV sync, 75 ohm Number of inputs 16 terminated Equalisation Automatic up to 300m (Belden 8281) Number of outputs 16 Re-clocking on outputs (on VD1616-RC version only) Impedance 75 ohm Return-loss in/out > 15dB (10MHz-270MHz) Signal level nom. 800mV Rise/fall time typ. 700ps Connector BNC AC power External power supply 100–260 VAC DC power ±5V, connector DB9 male Dimensions 483x44x300 mm (19”, 1RU)

Specifications Data rate NRZ VIT input

143Mbit/s–360Mbps Comp. Video 1Vpp, 300mV sync, 75 ohm Number of inputs 8 terminated Equalisation Automatic up to 300m (Belden 8281) Number of outputs 8 Impedance 75 ohm Return-loss in/out > 15dB (10MHz-270MHz) Signal level nom. 800mV Rise/fall time typ. 700ps Connector BNC AC power External power supply 100–260VAC DC power +5V, connector DB9 male Dimensions 483 x 44 x 45 mm (19”, 1RU)

Also available as unbalanced 75 ohm (AD0808-75)

Also available as unbalanced 75 ohm (AD1616-75)

64 | network-electronics.com

Also available as with a control panel in the front (AD0808CP-110 and AD0808CP-75)


VIKINX COMPACT

Digital Audio

1.4

AD1602-110

16x2

• Expandable up to 64x2 • Legendable buttons • Balansed In/Outputs

Specifications Data rate NRZ VIT input

143Mbit/s–360Mbps Comp. Video 1Vpp, 300mV sync, 75 ohm Number of inputs 8 terminated Equalisation Automatic up to 300m (Belden 8281) Number of outputs 8 Impedance 75 ohm Return-loss in/out > 15dB (10MHz-270MHz) Signal level nom. 800mV Rise/fall time typ. 700ps Connector BNC AC power External power supply 100–260VAC DC power +5V, connector DB9 male Dimensions 483 x 44 x 45 mm (19”, 1RU)

Also available as unbalanced 75 ohm (AD1602-75)

Also available as with a control panel in the front (AD1602CP-110 and AD1602CP-75)

network-electronics.com

| 65


VIKINX COMPACT

1.4 Telecom T6464-34/45

T3232-34/45

64x64

32x32

• 34Mbps or 45Mbps Data rate • Input Equalisation • Output-Reclocking • Meets ITU-T G.703 for HDB3 signals • RS-232 Interface • Network Control Bus

Specifications Data rate 34Mbps – 45Mbps G.703 HDB3 Number of inputs 64, terminated Equalisation Automatic, up to 200m (Belden 8281) Number of outputs 64 Impedance 75 ohm Re-clocking On outputs Return loss > 16dB (10MHz–270MHz) Signal level 1000 mV fixed, 75 ohm load Connector BNC AC Power External power supplies 100–260 VAC DC Power ±5V, connector DB9 male Max power consumption < 17.5W Dimensions 483 x 616 x 120 mm (19”, 14RU)

66 | network-electronics.com

Specifications Data rate 34Mbps–45Mbps G.703 HDB3 Number of inputs 32 terminated Equalisation Automatic up to 200m (Belden 8281) Number of outputs 32 Re-clocking on outputs Impedance 75 ohm Return-loss > 16dB Signal level 1000mV fixed on 75 ohm load Connector BNC AC power External power supply 100–260 VAC Power option 24–72V DC DC power ±5V, connector DB9 male Dimensions 483x308x100 mm (19”, 7RU)


VIKINX COMPACT

Telecom

1.4

T6464-140/155

T3232-140/155

64x64

32x32

• 140Mbps or 155Mbps Data rate • Input Equalisation • Non-Reclocking • Meets ITU-T G.703 for CMI signals • RS-232 Interface • Network Control Bus

Specifications Data rate 140Mbps – 155Mbps G.703 CMI Number of inputs 64, terminated Equalisation Automatic, up to 200m (Belden 8281) Number of outputs 64 Impedance 75 ohm Return loss > 16dB (10MHz – 270MHz) Signal level 1000 mV fixed, 75 ohm load Connector BNC AC Power External power supplies 100–260 VAC DC Power +5V, connector DB9 male Max power consumption < 80W Dimensions 483 x 132 x 120 mm (19”, 3RU)

Specifications Data rate 140Mbps–155Mbps G.703 CMI Number of inputs 32 terminated Equalisation Automatic up to 200m (Belden 8281) Number of outputs 32 Impedance 75 ohm Return-loss > 16dB Signal level 1000mV fixed on 75 ohm load Connector BNC AC power External power supply 100–260 VAC Power option 24–72V DC DC power +5V, connector DB9 male Dimensions 483x132x100 mm (19”, 3RU)

network-electronics.com

| 67


VIKINX COMPACT

1.4 Telecom T1616-34/45

T0808-34/45

16x16

8x8

• 34Mbps or 45Mbps Data rate • Output-Reclocking • Meets ITU-T G.703 for HDB3 signals

Specifications Data rate 34Mbps–45Mbps G.703 HDB3 Number of inputs 16 terminated Equalisation Automatic up to 200m (Belden 8281) Number of outputs 16 Re-clocking on outputs Impedance 75 ohm Return-loss > 16dB Signal level 1000mV fixed on 75 ohm load Connector BNC AC power External power supply 100–260 VAC Power option 24–72V DC DC power ±5V, connector DB9 male Dimensions 483x132x280 mm (19”, 3RU)

68 | network-electronics.com

• 34Mbps or 45Mbps Data rate • Output-Reclocking • Meets ITU-T G.703 for HDB3 signals

Specifications Data rate 34Mbps–45Mbps G.703 HDB3 Number of inputs 8 terminated Equalisation Automatic up to 200m (Belden 8281) Number of outputs 8 Re-clocking on outputs Impedance 75 ohm Return-loss > 16dB Signal level 1000mV fixed on 75 ohm load Connector BNC AC power External power supply 100–260 VAC Power option 24–72V DC DC power ±5V, connector DB9 male Dimensions 483x88x40 mm (19”, 2RU)


VIKINX COMPACT

Telecom

1.4

T1616RC-140/155

T1616-140/155

16x16

8x8

• 140Mbps or 155Mbps Data rate • Output-Reclocking • Meets ITU-T G.703 for CMI signals

Specifications Data rate 140Mbps – 155Mbps G.703 CMI Number of inputs 16 terminated Equalisation Automatic up to 200m (Belden 8281) Number of outputs 16 Re-clocking on outputs Impedance 75 ohm Return-loss > 16dB Signal level 1000mV fixed on 75ohm load Connector BNC AC power External power supply 120-260 VAC Power option 24–72V DC DC power +5V, connector DB9 male Dimensions 483x44x280 mm (19”, 1RU)

• 140Mbps or 155Mbps Data rate • Non-Reclocking • Meets ITU-T G.703 for CMI signals

Specifications Data rate 140Mbps–155Mbps G.703 CMI Number of inputs 16 terminated Equalisation Automatic up to 200m (Belden 8281) Number of outputs 16 Impedance 75 ohm Return-loss > 16dB Signal level 1000mV fixed on 75 ohm load Connector BNC AC power External power supply 100–260 VAC Power option 24–72V DC DC power +5V, connector DB9 male Dimensions 483x44x280 mm (19”, 1RU)

network-electronics.com

| 69


VIKINX COMPACT

1.4 Telecom T0808–140/155

8x8

• 140Mbps or 155Mbps Data rate • Non-Reclocking • Meets ITU-T G.703 for CMI signals

Specifications Data rate 140Mbps–155Mbps G.703 CMI Number of inputs 8 terminated Equalisation Automatic up to 200m (Belden 8281) Number of outputs 8 Impedance 75 ohm Return-loss > 16dB Signal level 1000mV fixed on 75 ohm load Connector BNC AC power External power supply 100–260 VAC Power option 24–72V DC DC power +5V, connector DB9 male Dimensions 483x44x40 mm (19”, 1RU)

70 | network-electronics.com


VIKINX COMPACT

1.4

network-electronics.com

| 71


VIKINX COMPACT

1.4 RS-422 Data D3232

32x32

• Machine and edit control • State of the art quality • Power down memory • For production systems • RS-232 Interface • Network Control Bus

72 | network-electronics.com

Specifications Data rate 5Mbps Connector DB9 female AC Power External power supply 100–260VAC DC Power +5V, connector DB9 male Dimensions 483x220x35 mm (19”, 5RU)


VIKINX COMPACT

RS-422 Data

1.4

D1616

D0808

16x16

8x8

Specifications Data rate 5Mbps Connector DB9 female AC Power External power supply 100–260VAC DC Power +5V, connector DB9 male Dimensions 483x88x300 mm (19”, 2RU)

Specifications Data rate 5Mbps Connector DB9 female AC Power External power supply 100–260VAC DC Power +5V, connector DB9 male Dimensions 483x88x300 mm (19”, 2RU)

network-electronics.com

| 73


VIKINX COMPACT

1.4 Compact Accessories

All Network products have a single desk top power supply included in the unit price. Below you will find some options for single or redundant power supply in 19”-2RU.

19”-2RU power supply frame can be equipped with up to 4 Motherboards, where each Motherboard can house up to 2 power supplies (single or redundant) of all VikinX equipment (routers, amplifiers, converters) up to the VikinX.32 Router Family, as well as AD6464-110 and A6464 Mono. For A6464 Stereo, please specify PSU’s for each Mono frame! Each motherboards have 5 DC power outlets. GPI Alarm per power supply included. Each power supply gives 60W. Autosensing 100-240VAC. Please call for 48V DC solutions. Note that all routers and control panels are supplied with single desktop power supply as standard.

Order no. Description: FR-PWR-1S Frame, 1 x Motherboard and 1 x Power Supply, handles up to 5 VikinX devices FR-PWR-1R Frame, 1 x Motherboard and 2 x Power Supplies, handles up to 5 VikinX devices FR-PWR-2S Frame, 2 x Motherboards and 2 x Power Supplies, handles up to 10 VikinX devices FR-PWR-2R Frame, 2 x Motherboards and 4 x Power Supplies, handles up to 10 VikinX devices FR-PWR-3S Frame, 3 x Motherboards and 3 x Power Supplies, handles up to 15 VikinX devices FR-PWR-3R Frame, 3 x Motherboards and 6 x Power Supplies, handles up to 15 VikinX devices FR-PWR-4S Frame, 4 x Motherboards and 4 x Power Supplies, handles up to 20 VikinX devices FR-PWR-4R Frame, 4 x Motherboards and 8 x Power Supplies, handles up to 20 VikinX devices Specify Power Cables (quantity of each type) when ordering FR-PWR-xx. See below. Power Cables for FR-PWR-xx DC-DC-+/-5V Cable, 1,5m (5 ft.), interconnects FR-PWR-xx and VikinX devices +/-5V Typical products: VIDEO DC-DC-+/-15V Cable, 1,5m (5 ft.), interconnects FR-PWR-xx and VikinX devices +/-15V Typical products: AUDIO FR-PWR-2R-V Rack mount Redundant PSU solution for V6464 and AD-6464-75. Frame, 2 x Motherboards and 4 x Power Supplies, incl. dedicated DC/DC PSU-Router cable FR-PWR-3R-VD Rack mount Redundant PSU solution for VD6464. Frame, 3 x Motherboards and 6 x Power Supplies, incl. dedicated DC/DC PSU-Router cable UPGRADE AND SPARE PARTS MODULES Power Supply Module for FR-PWR-xx PWR-AC Power supply with 2 x 15V and 2 x 5V, 60W, 15/15/5/5V input 110-260VAC auto-sensing, for spare or redundant supply PWR-DC Power supply with 2 x 15V and 2 x 5V, 60W, input 15/15/5/5V 36-72VDC, for spare or redundant supply Backplane for power supply modules for FR-PWR-xx BCK-PL Backplane for Power Supply Modules for FR-PWR-xx, can hold 2 x PSU modules

PWR-AC15/15/5/5V

74 | network-electronics.com

Fan FR-Fan-1RU

Fan for ventilation, 1 RU. Please call for further instructions.


VIKINX COMPACT

Compact Accessories

1.4

DESKTOP Power Supply Units (PSU) AC Main DC mains AC +/- 5V / 10W DC +/- 5V / 30W AC +/- 5V / 25W (V6464) DC +/- 15V / 30W AC +/- 5V / 30W AC +/- 5V / 110W (VD6464/T6464-140) AC +/- 15V / 10W AC +/- 15V / 30W AC +/- 15V / 35W (CAV16) Please refer to product manual/specification for correct power supply. Accessories Y-cable, for redundant power A necessary item to combine two power supplies for redundancy TOOL-KIT RJ45-NCB Connector Matchbox (adapter) between RJ45 and NCB (Network Control Bus), incl. 2 x NCB 0.3 and 2 x RJ45-RJ45-0.3 RJ45-NCB-ADP Connector Matchbox (adapter) between RJ45 and NCB (Network Control Bus) DB25Pin Adaptor Small print-card with DB25 to screwterminal NCB-bus Cable incl. Connectors NCB-0,3 NCB (Network Control Bus) 0.3 meter cable NCB-1,5 NCB (Network Control Bus) 1.5 meter cable NCB-3,0 NCB (Network Control Bus) 3.0 meter cable NCB-7,5 NCB (Network Control Bus) 7.5 meter cable NCB-15 NCB (Network Control Bus) 15 meter cable NCB-25 NCB (Network Control Bus) 25 meter cable NCB-50 NCB (Network Control Bus) 50 meter cable NCB-xx NCB (Network Control Bus) longer lengths Audio DB25 to XLR 3m x XLRF-25pin Network DB25pin Audio Contact to 8 x XLRF (Female),3 meter cable 3m x XLRM-25pin Network DB25pin Audio Contact to 8 x XLRF (Male), 3 meter cable

network-electronics.com

| 75


Signal Transport, Processing and Distribution Since its introduction to the broadcast market in 1999, the Flashlink range has gained a track record that speaks for itself. Numerous prestigious awards and an impressive installed base of products, prove that the Flashlink product range is at the forefront of technology while remaining simple in use. The modular Flashlink product range features very low power consumption and extensive control capabilities with SNMP support for all modules as standard.

Meeting the needs of demanding customers The Flashlink product range is designed to solve the most mission critical signal transport applications in a demanding broadcast environment. The modular system’s functionality is based on real-world feedback from customers based across the globe.

Three different Enclosures The comprehensive and versatile modular product range can be fitted in three different enclosures: APPLICATION

HOUSING

Stand-alone

Flashlink Micro Series N-BOX single module frame

Rack mount, studio facilities, OB vans

Flashlink FR-2RU 19� frame for up to 10 modules and dual power supply

Mobile use, outside broadcast, events

MOT-BOX, lightweight rugged housing for Flashlink FR-2RU frame


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Flashlink Overview Rack mount, studio facilities, OB vans: Flashlink FR-2RU 19” frame for up to 10 modules and dual power supply

2 Mobile use, outside broadcast (OB), events: MOT-BOX, lightweight rugged housing for Flashlink FR-2RU frame

Stand-alone: N-BOX single module frame

Flashlink Micro

Functions included…

Flashlink Micro is a comprehensive line of standalone products based on the well-accepted N-BOX enclosure. Flashlink Micro offers the highest quality and flexibility available for stand-alone products in the marketplace at a competitive price level.

Other stand-alone products in the Flashlink range comprises Flashlink Compact 1RU 19” cost effective distribution amplifiers and the award-winning 1RU 19” SDI to IP and ASI to IP gateways for video transport over existing IP infrastructure.

• SDI and AES embedding/de-embedding with analogue signal support • SD-SDI and HD-SDI 2x1 changeover modules • Distribution amplifiers all flavours • Electrical to Optical and Optical to Electrical media conversion • Fibre optical signal distribution and automatic protection switching • Optical multiplexing, WDM, CWDM and DWDM • 3R-regeneration of optical signals with wavelength scheme swapping • Electrical multiplexing, TDM • AES to analogue audio and analogue audio to AES conversion • SDI to NTSC/PAL encoding, 10-bit and 8-bit version • NTSC/PAL to SDI decoding • Line and frame synchronisation • System Controller with web and SNMP support

Signal formats supported by Flashlink…

the world’s most compact 16-channel CWDM system

• Uncompressed SD-SDI/HD-SDI • NTSC/PAL • Analogue audio and video • AES and MADI • E4, STM1-16, OC3-48 • DVB-ASI, M2S (Divicom), SMPTE 310, SDTI • RS-422, GPI/GPO • 10/100/1000Mbps Ethernet • Fibre Channel • Analogue L-band signals

The Flashlink product range also includes the world’s most compact 16-channel CWDM system in only 2RU fully populated with dual SD-SDI or HD-SDI modules. This extraordinary packing density saves precious rack space.

Different enclosures – same modules The same modules can be used in all three enclosures making Flashlink the most flexible system in the market place. The system can be built and extended according to current customer needs.

Stand-alone products

Widly deployed DWDM system Flashlink’s DWDM system has been deployed world wide since year 2000, and with up to 80 ITU wavelengths per fibre this is the preferred solution if access to fibre is limited. With each of these 80 wavelengths carrying 4 time division multiplexed uncompressed SDI signals it means a total of 320 uncompressed SDI signals on a single strand of fibre.

All in all, Flashlink provides the ideal building blocks for broadcast infrastructure. Ask your local sales representative for a demonstration and see for yourself the system’s performance and simplicity.

network-electronics.com

| 77


FLASHLINK MICRO

2.1 Flashlink Micro Distribution Amplifiers Embedders / De-embedders Video Converters Audio Converters Synchronisation Modules Automatic Changeover Modules EO and OE Converters Datacom Interfaces

One Flashlink card + One in-line power supply + One N-Box = Flashlink Micro

Flashlink Micro, your ideal choice for desktop applications – High performance video/audio processing and fibre optics made simple Modules for desktop and stand alone applications have until now been associated with mediumlow to medium-high performance with little or no reconfiguration possibilities. Well, those days are gone.

• Under the table mounting • Angled wall-, on-table- and under-the-tablemounting • Stacking of Flashlink Micro modules

Interchangeable modules

The comprehensive Flashlink Micro range covers a wide variety of functions: • Audio and Video conversion, processing and synchronisation • Distribution amplifiers • Fibre conversion of SDI and HD-SDI signals • Embedding/de-embedding • Datacom Interfaces • Automatic changeover modules for redundancy

– Initial cost savings combined with a future proof upgrade path With Flashlink Micro, Network Electronics introduces the industry standard Flashlink modules fitted in a compact and cost-effective housing for stand alone applications. As regular Flashlink modules are used in the Flashlink Micro series it is no longer a trade off between form factor and module performance, the best of both worlds can finally be realised with Flashlink Micro.

Minimum setup time Flashlink Micro comes with an in-line brick power supply (redundant power optional, brick or rackmount) so all you need is to connect signal- and power cables and the self-contained box is up and running with full broadcast quality in no time.

Maximum functionality

Low power consumption All Flashlink Micro modules are designed with low power consumption in mind.

Ruggedised enclosure design The combination of high reliability design philosophy and the ruggedised enclosure design, means you can enjoy Flashlink Micro for many years.

Monitoring and configuration

Future proof upgrade path

Control features like on board status LED’s and GPI interface as well as RS-422 interface for GYDA control is standard on all modules. Re-configuration of the module is easily done with DIP-switches on the module itself or via the GYDA system controller for Flashlink.

Since the boards and back planes of Flashlink Micro are the same as in the Flashlink 2RU modular frame holding up to 10 modules, the roadmap to future system expansion is crystal clear and straight forward. Interchangeable boards means that all modules in Flashlink Micro automatically are compliant with relevant broadcast standards, as is the case for the Flashlink 2RU modular system.

Flexible mounting Various mounting options are available for increased mounting flexibility: • 1RU Tray for 4 Flashlink Micro modules • Wall mounting • On table mounting

78 | network-electronics.com

In the next few pages you can see for yourself that Flashlink Micro meets or exceeds your expectations to modules for desktop or stand-alone applications.


FLASHLINK MICRO

Distribution Amplifiers

2.1

FM-DA-HDSDI

FM-DA-SDI

HD-SDI Multirate Distribution Amplifier

SDI Distribution Amplifier

• SDI/HD-SDi/AES-3id support • Automatic bit rate detection • On-board cable equaliser • Non-video bitrate support • Only 3W power consumption

• SDI/AES-3id support • Automatic bit rate detection • On-board cable equaliser • Non-video bitrate support • Only 3W power consumption

In: 1 – Out: 6

In: 1 – Out: 6

More details, see page XX

More details, see page XX

FM-DA-SDI-NRC

FM-DA-VA

SDI Distribution Amplifier (non-reclocked)

Analogue Video Multisignal Distribution Amplifier

• SDI / ASI fan-out distribution amplifier • 6 non-inverting outputs • Configurable EQ defeat for low bitrates

• SDI / ASI fan-out distribution amplifier • 6 non-inverting outputs • Configurable EQ defeat for low bitrates

In: 1 – Out: 6

In: 1 – Out: 6

More details, see page XX

More details, see page XX

FM-DA-AES

FM-DA-AA

Dual Digital Audio Distribution Amplifier

Dual Analogue Audio Distribution Amplifier

• Digital audio distribution amplifier • Configurable as Dual 1x4 or Single 1x8 • Reports signal presence • Supports sample rate from 15 to 96kHz • Supports bit rate from 16kbps to 14Mbps

• Analogue audio distribution amplifier • Precision gain settings for -12 to +12dB • Allows mixing of 2 inputs in dual 1x4 mode • For balanced AC signals from 3.3Hz to 400kHz

In: 1 or 2 – Out: 8 or 2x4 More details, see page XX

In: 2 – Out: 8

More details, see page XX

FM-DA-T140 Telecom Distribution Amplifier • 140Mbps E4, 155Mbps STM-1 Distribution Amplifier • 6 outputs, non-inverting • Automatic input cable EQ • ITU-T G.703 compatible • Allows distribution of 1-540Mbps signals up to 1000mV amplitude • EQ bypass function • AES-3id support In: 1 – Out: 6

More details, see page XX

FM-DAC-MON

FM-DAC-PAL-M

SDI Distribution Amplifier w/Monitoring Output

SDI Distribution Amplifier w/Monitoring Output

• 8-bit composite encoder and DA • 3 SDI and 3 composite outputs • Automatic standards detection • EDH monitoring

• 8-bit composite encoder and DA • 3 SDI and 3 composite outputs • Automatic standards detection • EDH monitoring

In: 1 Out: 3 re-clocked SDI and 3 NTSC/PAL composite

In: 1 Out: 3 re-clocked SDI and 3 NTSC/PAL composite

More details, see page XX

More details, see page XX

network-electronics.com

| 79


FLASHLINK MICRO

2.1 Embedders / De-embedders

Also available with 75ohm AES-3id backplane

FM-Av-MUX, FM-Av-MUX-xxT

FM-AV-DMUX, FM-AV-DMUX-R

Digital Audio Embedder

Digital Audio De-embedder

• 4-channel 24-bit AES (8 mono audio) audio embedder • Automatic insertion of sample rate converters • EDH in accordance with SMPTE-RP165 • Embedding in acc. with SMPTE-272M giving maximum compatibility to 3rd party products • Transformer balanced AES in- and outputs • Allows external sampling rates from 16-144kHz w/SRC enabled • Can be used as 4-CH embedder, 4-CH de-embedder or 2-CH de-embedder/embedder • 110ohm balanced and 75ohm unbalalanced version available • Optional with optical output (AV-MUX-xxT)

Also available with 75ohm AES-3id backplane

• 4-channel 24-bit AES (8 mono audio) audio de-embedder • EDH in accordance with SMPTE-RP165 • De-embedding in acc. with SMPTE-272M giving maximum compatibility to 3rd party products • Transformer balanced AES outputs • 110ohm balanced and 75ohm unbalanced version available • Optional with optical input (AV-DMUX-R) More details, see page XX

More details, see page XX

FM-Av-HD-XMUX, FM-AV-HD-XMUX-R

FM-AAv-MUX, FM-AAv-MUX-xxT

HD Digital Audio Embedder

Analogue Audio Embedder

• All-in-one Embedder and De-embedder • Multi-format SD/HD support • Embeds and de-embeds 4 AES signals • AES inputs with sample rate conversion allowing sampling rates from 24 to 96kHz (8kHz-216kHz) • Sample rate conversion bypass for Dolby E audio • Transformer coupled AES in- and outputs • Accepts 20 or 24 bit audio • RS-422 input for embedding of serial data or GPI information • Uninterrupted transport of AES audio in case of loss of SDI signal • Automatic mute of AES in case of AES errors • Optional optical input and output providing up to 30dB optical budget (SD) • Supports pathological SDI/HDSDI pattern (checkfield) • 1310nm, 1550nm and CWDM lasers ­available • Audio matrix and processor allowing group swap, channel shuffle, L/R inversion and channel summing • 4-channel AES variable audio delay line with up to 1.2s delay • Internal video generator • Audio Test Tone generator • Built-in EDH processor • Backplanes for balanced 110 ohm and unbalanced 75 ohm AES available • GYDA enabled for remote control, status monitoring, error reporting and SNMP ­support

• 4 channel analogue audio embedder • 24 bit converters 107dB(A) typical dynamic range • Cascadable for additional audio channels • Gain adjustments with DIP switches • EDH insertion and handling • 20 or 24 bit embedding • Optional with optical output (AAV-MUX-xxT)

Transponder

AES-3ID (75 ohm)

More details, see page XX

80 | network-electronics.com

More details, see page XX

FM-AAV-DMUX, FM-AAV-DMUX-R Analogue Audio De-embedder • 4 channel analogue audio de-embedder • 24 bit converters 106dB(A) typical dynamic range • Cascadable for additional audio channels • Gain adjustments on DIP switches • EDH insertion and handling • Optional with optical input (AAV-DMUX-R) More details, see page XX


FLASHLINK MICRO

Signal Processing and Synchronisation

2.1

FM-ADC-SDI

FM-DAC-AES

NTSC/PAL to SDI Decoder

Dual Audio D/A Converter

• 10-bit composite to SDI decoder • Automatic standards detection • EDH and field 1 ID insertion • 2x oversampling (27MHz) • Analogue inputs w/ loop-through, 3 SDI outputs • 3-line adaptive comb filters and selectable filter settings More details, see page XX

• 24-bit high performance AES to analogue audio converter • Two independent converters on one board • Typical dynamic range of 120dBA • Transformer balanced AES inputs • Allows sampling rates from 32–96kHz More details, see page XX

FM-ADC-SDI-CC

FM-ADC-AES

Video A/D Converter and Decoder

Dual Audio A/D Converter

• 10-bit component, composite or Y/C to SDI converter • Built-in video PROC-AMP • 3 SDI outputs • 5 line adaptive comb filter and selectable filter settings • Automatic standards detection • EDH and field 1 ID insertion More details, see page XX

• 24-bit high performance analogue audio to AES converter • Two independent converters on one board • Typical dynamic range of 117dBA • Transformer balanced AES outputs • Internal sampling rates 44.1, 48 and 96kHz Also available with 75ohm AES-3id backplane

More details, see page XX

FM-DAC-SDI

FM-DLY-AES

SDI to NTSC/PAL Encoder and D/A Converter

Dual AES Audio Delay

• 10-bit SDI to composite encoder and 10-bit SDI to component converter in one product • Built-in frame synchroniser w/ sub-carrier and horizontal phase adjustment • Large frame buffer (4 frames) • EDH monitoring • 4x oversampling (54 MHz) • SDI input w/ loop-through, 4 analogue outputs More details, see page XX

• 2 independent audio delay signal paths • Built-in sample rate converter accepting 32, 41.1, 48kHz • Black-burst and AES-11 reference input • Up to 10s delay at 48kHz • Simultanous fixed delay and externally switchable dynamic delay • Delay tracking input for synchronisation with DAC-SDI, FRS-SDI or other video devices • 2 AES outputs per delay line • Transformer balanced AES in- and outputs More details, see page XX

FM-HDSDI-CHO-2x1

FM-LIS-SDI

HD Change-over

SDI Line Synchroniser

• Multi-rate change-over • Non-broadcast data rates also supported nonreclocked • Auto change-over on signal loss or reclock error • Configurable change back logic • Reports signal loss and bitrate • GPI control and alarms • Integrated DA with 4 re-clocked HD/SDI outputs More details, see page XX

• SDI 10 bit 4:2:2 line synchroniser • Analogue Black Burst genlock • EDH insertion and handling in accordance with SMPTE-RP165 • SDI 4:2:2 input with one active loop-through output • 3 x SDI 4:2:2 line synchronised outputs • Automatic detection of 525- and 625-line format input More details, see page XX

FM-SDI-CHO-2x1

FM-FRS-SDI

SDI Change-over

SDI Frame Synchroniser

• SDI change-over • Non-broadcast data rates also supported nonreclocked • Auto change-over on signal loss or reclock error • Configurable change back logic • Reports signal loss and bitrate • GPI control and alarms • Integrated DA with 4 re-clocked SDI outputs More details, see page XX

• SDI 10 bit 4:2:2 frame synchroniser with embedded audio handling • Analogue Black Burst genlock • Selectable freeze on last good frame or black video on error or on loss of input signal • EDH insertion and handling in accordance with SMPTE-RP165 • Wide delay range, from 128us up to 232ms ­(Sample, H and V adjustment) • Audio delay tracking output • SDI 4:2:2 input with one active loop-through output • 3 x SDI 4:2:2 synchronised outputs • Automatic detection of 525- and 625-line format input More details, see page XX

network-electronics.com

| 81


FLASHLINK MICRO

2.2 Optical Converters FM-SDI-EO-13T

FM-SDI-OE-S

SDI Electrical to Optical converter

SDI Optical to Electrical converter

• 1310nm Single Mode • Built-in dual output Distribution Amplifier • High performance laser for the long haul • DVB-ASI compatible • SMPTE 259M/297M compliant More details, see page XX

• Sensitivity -20dBm • Max. input -6dBm • High sensitivity receiver • Buil-in dual output Distribution Amplifier • DVB-ASI compatible • SMPTE 259M/297M compliant More details, see page XX

FM-SDI-EO-2-13T Dual SDI Electrical to Optical converter • 1310nm Single Mode • –7.5dBm F-P laser • High-density packaging in the ultra compact 2RU frame • 1310nm, 1550nm and CWDM laser available • High performance laser for the long haul • Full DVB-ASI compatibility • Built-in crossover allowing wavelength swap and emergency switching • Active looped SDI output More details, see page XX

FM-SDI-EO-2-13T, 0dBm Dual SDI Electrical to Optical converter • 1310nm Single Mode • 0dBm laser • High-density packaging in the ultra compact 2RU frame • 1310nm, 1550nm and CWDM laser available • High performance laser for the long haul • Full DVB-ASI compatibility • Built-in crossover allowing wavelength swap and emergency switching • Active looped SDI output More details, see page XX

FM-HD-OE HD-SDI Optical to Electrical converter • High sensitivity receiver • Buil-in dual output Distribution Amplifier • DVB-ASI compatible • SMPTE 259M/292M compliant

FM-SDI-OE-2 Dual SDI Optical to Electrical converter • Sensitivity -20dBm • Max. input -6dBm • High sensitivity receiver • Buil-in dual output Distribution Amplifier • DVB-ASI compatible • SMPTE 259M/297M compliant More details, see page XX

FM-HD-EO-13T HD-SDI Electrical to Optical converter • 1310nm Single Mode • Built-in dual output Distribution Amplifier • High performance laser for the long haul • DVB-ASI compatible • SMPTE 259M/292M compliant More details, see page XX

FM-HD-EO-2-13T Dual HD-SDI Electrical to Optical converter • 1310nm Single Mode • –7.5dBm F-P laser • High-density packaging in the ultra compact 2RU frame • High performance laser for the long haul • Full DVB-ASI compatibility • Built-in crossover allowing wavelength swap and emergency switching • Multiformat Re-clocking More details, see page XX

More details, see page XX

FM-HD-OE-2

FM-HD-EO-2-13T, 0dBm

Dual HD-SDI Optical to Electrical Converter

Dual HD-SDI Electrical to Optical converter

• High-density packaging in the ultra compact 2RU frame • High sensitivity receiver • Full DVB-ASI compatibility • Built-in crossover allowing wavelength swap and emergency switching • 2 Output Distribution Amplifier • Multiformat Re-clocking • Re-clocker bypass for non-video formats More details, see page XX

82 | network-electronics.com

• 1310nm Single Mode • 0dBm laser • High-density packaging in the ultra compact 2RU frame • 1310nm, 1550nm and CWDM laser available • High performance laser for the long haul • Full DVB-ASI compatibility • Built-in crossover allowing wavelength swap and emergency switching • Multiformat Re-clocking More details, see page XX


FLASHLINK MICRO

Datacom Interfaces

2.2

FM-ETH100-13T

FM-ETH1000-13T

Fast Ethernet Converter

Gigabit Ethernet Media COnverter

• Transmitter and receiver on one card • 1310, 1550nm and CWDM lasers • Electrical output for use in DWDM systems • Two electrical inputs • Onboard switch • Sensitivity better than -36dBm

• Transmitter and receiver on one card • 10BaseT/100BaseTx/1000BaseT auto sensing, compliant with IEEE 802.3 and IEEE 802.3u, auto MDI/MDI-X • 1310nm, 1550nm, CWDM lasers • Receiver sensitivity better than -25dBm • Card edge LEDs and GYDA enabled • Low power (2W) More details, see page XX

More details, see page XX

Flashlink Micro Accessories N-BOX-CABLE Cable Cable for centralized powering of 4 x N-BOX, includes break-out for GYDA control interface

N-BOX-SH1RU

N-BOX-PL1

1RU Shelf

Mounting Plate

1RU shelf for up to 4 x N-BOX, including 3 front panels for empty slots

Mounting plate for N-BOX, allows wall, on-table, under-table mounting, complete with screw set

N-BOX-PL2

N-BOX-PL3

Angled Mounting Plates

Interconnecting Plate

Angled mounting plate for N-BOX, allows wall, on-table, under-table mounting, complete set with 2 plates and screws

Interconnecting plate for N-BOX, allows stapling of N-BOXes, complete set with 2 plates and screws

network-electronics.com

| 83


1RU COMPACT DISTRIBUTION AMPLIFIERS

2.2 Compact Distribution Amplifiers AV0110

A0108DS

Analogue Video Audio Distributor 1x10

Analogue Stereo Audio Distributor 1x8 Dual

• 1x10 Video/Audio • 100kHz Audio Bandwidth • 80MHz Video Bandwidth • Broadcast Specification • Studio, CCTV, Duplication

AUDIO Frequency response 20Hz–100kHz ±0.1dB Crosstalk > –100dB THD+N < 0.003% SNR > 90dB ref. to 0db 20Hz–20kHz Number of inputs 1 looped (stereo) Input impedance 47 k ohm Max. input level +22dBu Number of outputs 10 (stereo) Output impedance 66 ohm Connector RCA VIDEO Frequency response 0-80MHz –3dB Differential gain < 0.07% (3.58/4.43MHz) Differential phase < 0.1° (3.58/4.43MHz) Video S/N Ratio > 68dB Gain 0dB, ±0.1dB Number of inputs 1 looped Number of outputs 10 Impedance 75 ohm Return loss > 40dB Max signal 2 Vp-p Coupling DC Connector BNC AC power External power supply 100–260VAC (included) DC power ±15V, connector DB9 male Dimensions 483x44x40 mm (19”, 1RU)

84 | network-electronics.com

• Dual 1x8 Stereo • 100kHz Audio Bandwidth • Balanced inputs and outputs • Additional unbalanced inputs • Broadcast specification

SPECIFICATION Frequency response 20Hz–100kHz ±0.1dB Crosstalk > –100dB THD+N < 0.003% SNR > 90dB ref. to 0db 20Hz–20kHz Number of inputs 4 mono (2 stereo) Input impedance > 10 k ohm Max. input level +23dBu Number of outputs 4x8 mono (2x8 stereo) Output impedance > 66 ohm Connector DB25 female Gain adjustment ± 6dB Unbalanced inputs 4 mono Input impedance 47 k ohm AC power External power supply 100–260VAC (included) DC power ±15V, connector DB9 male Power consumption 9W max Dimensions 483x44x45 mm (19”, 1RU)


1RU COMPACT DISTRIBUTION AMPLIFIERS

Compact Distribution Amplifiers

2.2

V0106Q

AD0108Q

Analogue Video Distributor 1x6 Quad

Quadruple Digital Audio AES/EBU Distributor

• Quadruple 1x6 Video • PAL, NTSC, HDTV, YC, SVGA, RGBS • 500MHz Video Bandwidth • High performance Broadcast Quality

• Quadruple 1x8 AES/EBU distributor • AES3, AES-3id / S/PDIF input • 48kHz compatible • Low jitter spec

SPECIFICATION Frequency response 0–500MHz –3dB Differential gain < 0.07% Differential phase < 0.22° Video S/N Ratio > 70dB Gain 0dB, ±0.1dB Number of inputs 4 looped Number of outputs 4x6 Impedance 75 ohm Return loss > 40dB Max signal 2 Vp-p Coupling DC Connector BNC AC power External power supply 100–260VAC (included) DC power ±5V, connector DB9 male Dimensions 483x44x40 mm (19”, 1RU)

SPECIFICATION Signal type AES/EBU digital audio (Stereo) Balanced inputs 4x transformer coupled AES3-110 Signal amplitude 0,2 – 7Vp-p Connector DB25 female Impedance 110 ohm Unbalanced inputs 4x 75 ohm 1Vp-p unbalanced coax, SMPTE 276M Signal amplitude 100mVp-p to 1Vp-p Connector RCA Impedance 75 ohm Outputs 4x8 AES3-110 Signal amplitude 4Vp-p ± 1Vp-p Connector DB25 female Impedance 110 ohm Jitter 0.7ns Sampling rates 32 – 48kHz AC power External power supply 100–260VAC (included) DC power +5V, connector DB9 male Dimensions 483x44x45 mm (19”, 1RU)

network-electronics.com

| 85


1RU COMPACT DISTRIBUTION AMPLIFIERS

2.2 Compact Distribution Amplifiers V0106DEQ

SDI0106Q

Video Equalising Distributor 1x6 Dual

Serial Digital Distributor 1x6 Quad

• Dual 1x6 Video • Differential inputs • Equalisation for up to 300m cable • Gain range –1.8 to +4dB • >25MHz Bandwidth • External DC control

Specification Frequency response 0–25MHz –3dB Differential gain < 0.2% Differential phase < 0.2° Video S/N Ratio > 70dB Number of inputs 2 looped, balanced Return loss > 40dB to 10MHz Number of outputs 2x6 Impedance 75 ohm Max signal 2 Vp-p Equalisation 0–300m RG59U or equiv. Gain range –1.8 to +4dB Connector BNC AC power External power supply 100–260VAC (included) DC power ±5V, connector DB9 male Dimensions 483x44x45 mm (19”, 1RU)

86 | network-electronics.com

• Quadruple 1x6 SDI • D1 4:2:2 270Mbps component • D2 177Mbps PAL composite • High performance Broadcast Quality

SPECIFICATION Data rate 143Mbps–270Mbps Min. signal level 0.25 nom.0.8V Max. signal level 4.5V Number of inputs 4 looped Number of outputs 4x6 Impedance 75 ohm Signal processing none Connector BNC AC power External power supply 100–260VAC (included) DC power ±5V, connector DB9 male Dimensions 483x44x40 mm (19”, 1RU)


2.2

network-electronics.com

| 87


FLASHLINK HOUSINGS

2.3 Flashlink Housings

Flashlink 2RU frame

MOT-BOX

• For rack-mount solutions, holds up to 10 modules + dual power supply • Houses e.g. the world’s most compact 16-channel CWDM system

• The most compact and lightweight 3RU mobile transport housing available • Holds a Flashlink 2RU frame • Only 12kg fully populated with redundant power supply

N-BOX • A rugged housing for desktop or stand alone applications, holds one module • Is the housing that is used for the Flashlink Micro product range

Flashlink – The most flexible system in the market place The range of different housings for the Flashlink system makes Flashlink the most flexible modular system in the market place. The same modules can be used for a wide variety of applications, thereby reducing inventory significantly. No need to stock multiple spares due to different form factor. The three different housings make Flashlink the ideal solution from desktop applications via state of the art fibre optical networks to the most challenging outside broadcast environments. Look no further, Flashlink meets or exceeds all your expectations.

88 | network-electronics.com


FLASHLINK HOUSINGS

Flashlink 2RU Frame

2.3

Flashlink 2RU Frame – Compact and comprehensive

After six years on the market, we decided to give the Flashlink FR-2RU-10-2 frame a face lift and some mechanical improvements to meet the demands from outside broadcast applications. The following changes have been done: • Enhanced high tech/high quality profile to match the module performance • Marking area inside and outside for all modules • Improved, rugged detach and lock mechanism giving improved shock and vibration resistance for outside broadcast applications. The rest of the Flashlink FR-2RU-10-2 frame is exactly as you would expect from a state-of-the-art modular system: Compact – only 2RU. Saves rack space like nothing else.

10 module slots • Mix and match modules according to your needs • All cabling at the rear • A fully functioning 16-channel CWDM system in only 2RU with dual converters

Easy configuration • Short time to get on air

No fans • Low power consumption means that we have removed the most common single point of failure; the fans

Two power supply slots • Single or redundant, load sharing power supply, AC, DC or both

No active components on backplane • Hot-swapping of modules and power supplies accessible from front means short replacement time • No re-cabling needed for module replacement/ re-configuration • No electrical disturbance on other modules during hot-swapping, particularly important in on air situations

Comprehensive control and monitoring • Status monitoring through front LED’s, GPI and RS-422 simultaneously • Address setting of each frame allows for simultaneous control of 8 frames • SNMP – Simple Network Management Protocol support for use with larger Network Management Systems is standard on all modules • GYDA System Controller provides web interface/ SNMP for all modules connected to the controller at a remote location • Remote configuration and monitoring saves time and trouble-shooting time

FR-2RU-10-2

Flashlink Frame AC power AC power supply module 100–260 VAC (PWR-AC15/15/5/5V) DC power (optional) DC power supply module 36–72 VDC (PWR-DC15/15/5/5V) Redundant power (optional) Dimensions 483 x 88 x 178 mm (19”, 2RU) Card slots 10 Power supply slots (reserved) 2 Internal voltages +5V, +15V, –15V Weight approx. 3 kg fully populated ­dependent on module types

Power Supply for Flashlink Frame Internal power supplies are available in both AC- and DC-versions. Mixed AC/DC operation is possible, when both power supply slots are used for redundancy. An LED in the front shows if the power is active. The internal powers can deliver 30W at ±5V, 15W at +15V and 15W at –15V at the same time.

PWR-AC15/15/5/5V Input voltage Output voltages

100-260VAC ±5V, ±15V DC

PWR-DC15/15/5/5V Input voltage 36-72VDC Output voltages ±5V, ±15V DC

network-electronics.com

| 89


FLASHLINK HOUSINGS

2.3 N-BOX N-BOX is an ultra compact, ruggedised and cost effective housing for the Flashlink modules. The same Flashlink modules and backplanes can be used in the Flashlink FR-2RU-10-2 frame and in N-BOX. This interchange ability allows for easy migration and system expansion from N-BOX to the Flashlink FR-2RU-10-2 frame in case of future expansion needs. All Flashlink modules have, of course, the same feature set regardless of housing. Distribution Amplifiers Embedders / De-embedders Video Converters Audio Converters Synchronisation Modules Automatic Changeover Modules EO and OE Converters Datacom Interfaces

N-BOX-SH1RU

N-BOX-PL1

1RU Shelf

Mounting Plate

1RU shelf for up to 4 x N-BOX, including 3 front panels for empty slots

Mounting plate for N-BOX, allows wall, on-table, under-table mounting, complete with screw set

N-BOX-PL2

N-BOX-PL3

Angled Mounting Plate

Interconnecting Plate

Angled mounting plate for N-BOX, allows wall, ontable, under-table mounting, complete set with 2 plates and screws

90 | network-electronics.com

Interconnecting plate for N-BOX, allows stapling of N-BOXes, complete set with 2 plates and screws


FLASHLINK HOUSINGS

2.3

network-electronics.com

| 91


FLASHLINK HOUSINGS

2.3 MOT-BOX

Flashlink MOT-BOX – Extremely lightweight mobile transport enclosure

MOT-BOX, the Star-Award recipient of NAB 2005, is the most compact and lightweight mobile transport enclosure available. MOT-BOX houses one Flashlink 2RU frame with modules for optical transport, signal processing and distribution.

RUGGED DESIGN With its rugged design it is the logical choice for all mission-critical mobile and outside broadcast applications.

IDEAL FOR OUTSIDE BROADCAST EVENTS Network Electronics is known as the supplier of routing and signal transport solutions to all major sports events in the world. Events like the Olympic Games, FIFA World Cup, and Skiing World Cups have been broadcasted to millions of viewers with Network Electronics equipment. The MOT-BOX is the ideal solution for coverage of these applications and any other outside broadcast event.

maximum mobility, two person lift is a thing from the past. One person can easily carry the MOT-BOX alone. In a fully loaded van close to exceeding weight limits, the low weight of the MOT-BOX will be appreciated.

Robust fibre cable The MIL specified tactile fibre with hermaphroditic connectors has 4 fibres and can be delivered in lengths of 150m, 250m or 500m. The extremely robust fibre cable ensures a reliable fibre connection.

Multiple fibres, multiple signals The 4 fibres allow uni- or bi-directional video with associated audio and RS-422 signals. By utilising TDM (electrical multiplexing) and CWDM (optical multiplexing) the number of signals can be increased to meet specific demands. HD-SDI, SD-SDI or analogue video, the choice is yours, MOT-BOX is the ideal companion for mobile and outside broadcast productions.

Minimised spares holding

MOT-BOX

The MOT-BOX can be pre-configured to meet specific requirements, and also shared among several vans for e.g. news gathering, substantially lowering the investment cost. Since the modules of the mobile system are exactly the same as you use in the studio, the number of spares can be held at a minimum.

• The most compact and lightweight 3RU mobile transport housing available • Holds a Flashlink 2RU frame • AC and DC power supply option • Supports the full set of Flashlink modules • Rugged connector backplanes for tough use • MIL specified tactile fibre cable reels with 4 fibres (optional) • Breakout panels to various connectors like SC/PC or E2000 available • Only 12kg fully populated with redundant power supply

Lightweight The MOT-BOX design with rugged connectors like XLRs for audio and a hermaphroditic (both male and female) fibre connector holding 4 fibres allows for use in harsh environment. The low weight gives

92 | network-electronics.com


FLASHLINK HOUSINGS

MOT-BOX

2.3

MOT-BOX

MOT-BOX AC Power PWR-AC15/15/5/5V AC power supply module 100-260 VAC DC Power (optional) PWR-DC15/15/5/5V DC power supply module 36-72 VDC Dimensions (WxDxH) 530 x 570 x 215 mm with front and rear covers. 530 x 425 x 215 mm w/o front and rear covers Weight Including PSU and 10 modules: <12 kg Card slots 10 Power Supply slots: 2 Internal voltages: +5V, -5V, +15V, -15V

Fibre hermaphroditic expanded beam connector

The optical fibre is fully protected behind a hard-coated expanded beam lens and forms a no-contact connection.

MOT-BOX Backplane Modules MB-FR-1RU

MB-MIL-4SC MB-MIL-CABLE

1RU frame with front mounted 4-fibre expanded beam hermaphroditic MIL connector, rear panel with 4 x SC-PC connector. Space for up to 5 MIL fibre connectors. Mil connector to 4xSC breackout for use with MB-FR-1RU Mil connector to 4xSC breackout cable

MB-BP-00

Blindplate

MB-BP-01

Backplane for ADC-AES

MB-BP-02

Backplane for DAC-AES, DA-AA or DA-AES

MB-BP-03

Backplane for SDI-OE, SDI-EO, HDOE or HD-EO

MB-BP-04

Backplane for DA-SDI ,DA-SDI-NRC, DA-HDSDI, ADC-SDI, ADC-SDI-CC or DAC-SDI

MB-BP-05

Backplane for AV-MUX

MB-BP-06

Backplane for AAV-MUX or AVA-MUX

MB-BP-07

Backplane for AV-DMUX, AAV-DMUX or AVA-DMUX

MB-BP-08

Backplane for D422-MG(RS422)

MB-BP-09

Backplane for D422-MD(GPI in and out)

MB-BP-10

Backplane with 4x SC-PC fibre connector including 4x 0,5m fibre patch cord

MB-BP-11

Backplane with 4x E2000/PC fibre connector including 4x 0,5m fibre patch cord

Dirt and contamination can be simply cleaned with a cloth (or your shirt sleeve)

MOT-BOX Reels with cables Singlemode tactical 4-fibre cable terminated with expanded beam hermaphroditic MIL fibre connector MB-Reel-150 Reel with 150m MB-Reel-250 Reel with 250m MB-Reel-500 Reel with 500m

network-electronics.com

| 93


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.4 Flashlink Modules

Flashlink modules – Comprehensive functionality with short installation time

The Flashlink range was introduced as a price competitive high performance product line in 1999. From the very beginning Flashlink gained an impressive track record, both in number of awards but even more important in number of installations and returning customers. A large and growing number of customers world-wide have now standardised on the Flashlink system.

Different housings fit any application Each Flashlink module consists of a passive backplane and a front loaded processing board containing all active components. The Flashlink modules can be fitted in different housings depending on the application: • Flashlink FR-2RU-10-2 main frame for studio applications. 2RU frame for 10 modules, saves rack space • N-BOX for stand alone applications (See Flashlink Micro for bundled stand alone solutions) • MOT-BOX, holds one FR-2RU-10-2 frame for mobile applications

Monitoring and configuration Control features like on board status LED’s and GPI interface as well as RS-422 interface for GYDA control is standard on all modules. All modules have Simple Network Management Protocol (SNMP) support as a standard feature. This is particularly useful for larger systems distributed on multiple sites. Re-configuration of the module is easily done with DIP-switches on the module itself or via the GYDA system controller for Flashlink.

94 | network-electronics.com

Hot swappable modules All modules in the Flashlink range can be swapped without disconnecting the power supplies. For on-air applications this is particularly useful, and it goes without saying that swapping modules will not interfere with signals running on other modules.

Only passive electronics on backplanes All active electronics is placed on the processing board, leaving the backplane with only passive components that will not fail. This means that no cable disconnection is needed for a module replacement. Hot swapping is done from the front of the rack in just a very few seconds.

Dual redundant power supplies (optional) The Flashlink FR-2RU-10-2 has room for two power supplies, and is delivered with a single power supply operating on either AC or DC as standard. Adding the optional second power supply gives power supply redundancy. The power supplies have separate inputs paths and can be fed from different sources giving maximum redundancy. Both autosensing AC and DC power supplies are available.

Low power consumption – no fans needed All Flashlink modules are designed with low power consumption in mind. The low power-high reliability design of Flashlink means that we have removed all fans from the system, thereby removing the component most likely to fail in a system. No fans means that the operator will have less noise in his/her working environment.


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Flashlink Modules

High performance modules with advanced functionality Short installation time and simple to use. The Flashlink design philosophy states that modules shall be easy to use and setup time shall be kept at a minimum. This shortens time to get on-air dramatically.

Standards compliance All modules in the Flashlink range comply with relevant industry standards. During the design phase of any Flashlink module we always investigate which standards apply. Standards compliance is a very important product feature as it ensures interoperability with 3rd party products complying with the same standards, as well as being a reference for performance measurements of the product.

Flashlink modules for HDTV infrastructure (SMPTE 292M) • Distribution Amplifiers • Embedders and deembedders • Single and dual electrical to optical converters • Single mode or multi mode fibres • All wavelength schemes supported, 1310/1550, CWDM and DWDM • Wavelength conversion modules for 3R regeneration • 16ch HD-SDI CWDM system in only 2RU, world’s most compact • 4-channel SD-SDI Time Division Multiplexer for utilisation of HDTV infrastructure according to SMPTE 346M

2.4

Maximum functionality The comprehensive Flashlink range covers a wide variety of functions: • Audio and Video conversion, processing and synchronisation • Distribution amplifiers • Fibre conversion of digital signals e.g. SDI and HD-SDI signals • Fibre conversion of L-band satellite signals • Dense/Coarse Wavelength Division Multiplexing (DWDM/CWDM) • Time Division Multiplexers • Wavelength transponding • Embedding/de-embedding of audio and video • Datacom Interfaces for RS-422 and 10/100/1000Mbps Ethernet • Automatic changeover modules for redundancy • GYDA System Controller for Flashlink (Web/SNMP) This section describes the different Flashlink modules available. If you want to learn more and experience the simplicity yourself, do not hesitate to contact your nearest sales representative for a demo.

network-electronics.com

| 95


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.4 System Controller for Flashlink GYDA-SC Control, Monitoring and Configuration – for the signal transport, processing and distribution products

GYDA MkII

New version!

• New, improved hardware design • Log-files are stored on compact flash files • New, user-friendly graphical user interface • Support for VikinX Compact and VikinX Sublime router control (requires GYDA MkII hardware) • Link to other GYDAs via left sidebar • Network System Configuration protocol implemented for IP setup • New SNMP system with alarm and trap filtering implemented for all modules • FTP service for online upgrades • Time-zone included with NTP settings • “Debug console” for service access to Flashlink internal bus

GYDA-SC – System Controller • a monitoring card for the Flashlink optical transport and signal processing system • controls up to 8 Flashlink frames with each up to 10 cards • provides a standard 10/100Base-T Ethernet interface with TCP/IP protocol • standard web browsers to configure and monitor Flashlink.

System CPU 400MHz Intel PXA255 StrongARM Memory 64MB SDRAM 8MB Flash Electrical Interfaces 2 x RS232 or RS422 control ports on DB9F conforming to IBM PC (RS232) or SMTPE207M (RS422) 1 x 10BaseT/100Base-TX fast ethernet, full duplex capable Power Consumption +5V, typ. 400 mA. Maximum 3W

96 | network-electronics.com

Enhanced GUI design is one of the improved features when Network Electronics takes the monitoring and control system GYDA to the next level.


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Flashlink Modules

2.4

Remote monitoring and control Use internet technology to connect remote sites together, enabling complete control of all your flashlink equipment from all locations. Sending technicians to remote locations for error tracing becomes a thing of the past. Error correction is faster, saving money and providing better availability to the end user.

Online monitoring GYDA will continuously monitor the system for all vital parameters, like signal quality and power supply voltages. The web page is always updated with the latest information.

Configuration All cards can be configured through GYDA. Some cards have complex set-up which is made easy with GYDA.

Alarms GYDA has advanced alarm handling, where an operator can get a “system health condition” report. The alarms are “sticky”, they will not be removed from the alarm list until they are acknowledged by an operator. An alarm can be acknowledged while it still is active, it will then be removed automatically from the alarm list, the moment the cause of the alarm is resolved. Example of alarms: • Card removed • Signal lost • Laser failed • Supply voltage dropped • GPI input

GYDA and SNMP applications All Flashlink modules will generate SNMP traps according to user settings in the interface configuration section on the GYDA System Controller. GYDA MkII is also able to interface and control cross point settings of the VikinX Compact routers, providing cross point information via SNMP or the web interface. This feature gives you the possibility to have: • Audible alarms • Alarm notification on e-mail • Browser pop-upon module pages with alarms • Trap relay

Logging The logging facility gives the user a system history with date and time of each event. The log will be stored on the flash crad, and can not be cleared without a reset, making it ideal for error tracing «a posteriori». Availability and Password protection In the default setup, GYDA is available to all users on the network. GYDA allows anonymous/open access to the card information. Two extra levels of protection (observer and operator) can be enabled for situations where anonymous access to the system, alarm and log tabs is not wanted. The built-in password protection uses the htpasswd mechanism of the Apache web-server. Manuals and technical documentation are always available The GYDA controller has a complete collection of all flashlink manuals in Adobe PDF format, always available to the operator.

network-electronics.com

| 97


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.4 Modular Distribution Amplifiers DA-HDSDI

DA-SDI

HD Distribution Amplifier

SDI Distribution Amplifier

Hd1 Hd2

sdi1

equaliser

sdi2

equaliser Hd Hd

Reclocker

Hd input

Reclocker

sdi input

Bypass

sdi sdi

Bypass Hd5 Hd6

Bypass 177M / asi

Microcontroller

Bypass 177M / asi

sdi5

remote Control

sdi6 Microcontroller

• Multi-rate distribution amplifier • 3 non-inverting outputs, 3 inverting outputs • Re-clocking rates 143, 177, 270, 360, 540, 1483.5, 1485Mbps • Configurable reclocker bypass for non-video bitrates • Configurable EQ defeat for low bitrates

Electrical Signal Inputs Number of inputs 1 Standard SMPTE 292M Data Rate 19.4Mbps – 1485Mbps Connector 75 ohm BNC female Impedance 75 ohm nominal Return Loss > 15dB (5MHz-1.5GHz) Cable Equalisation 0 to 100m typical Belden 1694A at HD rates, 0 to 300m typical Belden 8281A at SD rates Electrical Signal Outputs Number of outputs 6 Connector 75 ohm BNC female Signal Level 800mVp-p ±100mV Signal Polarity 3 outputs non-inverting, 3 outputs inverting Impedance 75 ohm nominal Return Loss > 15dB (5MHz-1.5GHz) Features Re-clocking rates

143, 177, 270, 360, 540, 1483.5, 1485Mbps Supported standards SMPTE 292M, 259M, 305.2M, 344M, 310M DVB-ASI EN50083-9 (on non-inverting outputs), AES-3id Configuration Configurable automatic mute or bypass when not locked. Automatic SD / HD detection. Automatic output slew rate adjustment according to SMPTE-259M / SMPTE 292M Input equaliser Bypass for non-video formats Configurable EQ mute

Control Interfaces Card Edge LEDs, GPI port, RS-422 with open protocol, SNMP Agent and WEB interface with GYDA controller Electrical Power

+5V DC / 3W

98 | network-electronics.com

remote Control

• SDI / ASI distribution amplifier • 6 non-inverting outputs • Re-clocking rates 143, 177, 270, 360, 540Mbps • Configurable reclocker bypass for non-video bitrates • Configurable EQ defeat for low bitrates

Electrical Signal Inputs Number of inputs 1 Standard SMPTE 259M Data Rate 19.4Mbps – 540Mbps Connector 75 ohm BNC female Impedance 75 ohm nominal Return Loss > 15dB (5MHz-270MHz) Cable Equalisation 0 to 300m typical Belden 8281A Electrical Signal Outputs Number of outputs 6 Connector 75 ohm BNC female Signal Level 800mVp-p ±100mV Signal Polarity All outputs non-inverting Impedance 75 ohm nominal Return Loss > 15dB (5MHz-270MHz) Features Re-clocking rates 143, 177, 270, 360, 540Mbps Supported standards SMPTE 259M, 305.2M, 344M, 310M, DVB-ASI EN50083-9 (on all outputs), AES-3id Configuration Configurable autom. mute or bypass when not locked Input equaliser Bypass for non-video formats Configurable EQ mute Control Interfaces Card Edge LEDs, GPI port, RS-422 with open protocol, SNMP Agent and WEB interface with GYDA controller GEneral Power

+5V DC / 3W


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Modular Distribution Amplifiers

2.4

DA-SDI-NRC (non-reclocked)

DA-VA

SDI Distribution Amplifier

Analogue Video Multisignal Distribution Amplifier

sdi1

sdi1

sdi2

equaliser sdi input

sdi Bypass

sdi2 sdi input

sdi

sdi

sdi

sdi5

sdi5

sdi6 Microcontroller

sdi6

remote Control

Microcontroller

• SDI / ASI fan-out distribution amplifier • 6 non-inverting outputs • Configurable EQ defeat for low bitrates

Electrical Input Data rate NRZ 1 to 540Mbps Data rate RZ 1 to 270Mbps Equalisation Automatic. Cable equaliser can be bypassed to support bitrates down to 1Mbps Impedance 75 ohm Return loss >15dB (500kHz–270MHz) Signal level nom. 800mV. apx. 200mV min. when equaliser switched to Bypass Connector BNC Electrical Output Number of outputs Connector Impedance Return loss Jitter Peak to peak signal level Signal polarity

6 BNC 75 ohm >15dB (500kHz – 270MHz) max 0.2UI 0.8V ± 80mV 6 non inverting

Features Input equaliser Eq. bypass for low bit rates General Power Control

+5V DC / 3W Max. Control system for access to setup and module status with BITE (Built-In Test Equipment) for use with GYDA Control System

Supported standards SMPTE SMPTE 259M AES AES-3id (with EQ switched off)

remote Control

• SDI / ASI fan-out distribution amplifier • 6 non-inverting outputs • Configurable EQ defeat for low bitrates

Electrical Input Maximum input 2 Vp-p Coupling DC Impedance 75 ohm (switchable to high impedance) Connector BNC Electrical Output Number of outputs Connector Impedance Signal polarity Analogue video Frequency range Return loss Video S/N ratio Differential gain Differential phase Gain

6 BNC 75 ohm 6 non inverting

0 to 200 MHz -3dB > 40dB @ 10MHz > 70dB < 0.1 % < 0.1 º 0dB ± 0.1dB 0-15 MHz 0dB ± 0.5dB 0-150 MHz

Analogue amplifier used for SDI-video (SMPTE259M) Gain 0dB Jitter < 700 ps, typ. 250 ps Return loss > 15dB @ 270MHz Data rate up to 270Mbps Rise/fall overshoot < 10 %, typ. 0 % Rise and fall time > 400 ps, < 1500 ps, typ. 1000 ps Rise/fall time difference < 500 ps, typ. 100 ps General Power Control

+5V DC / 0.1 W, ±15V DC / 1.9W Control system for access to setup and module status with BITE (Built-In Test Equipment) for use with GYDA Control System

network-electronics.com

| 99


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.4 Modular Distribution Amplifiers DA-AES

DA-AA

Dual Digital Audio Distribution Amplifier

Dual Analogue Audio Distribution Amplifier aes 1 output aes 1 output

aes 1 input

ana 1 output

ana 1 input

ana 1 output

aes 1 output

ana 1 output gain settings

aes 1 output aes 2 output aes 2 output

aes 2 input

ana 2 output

aes 2 output

Microcontroller

ana 2 output gain settings

remote Control

Electrical Input Number of inputs 1 or 2 Standard AES-3 Supported Sample Rate 15-96kHz Signal Amplitude 0.2-7Vp-p Connector DB15 balanced Impedance 110 ohm nominal Electrical Output Number of outputs 8 or 4+4 Connector DB25 balanced Signal amplitude 4Vp-p ±1Vp-p Impedance 110 ohm nominal Features Configurable dual 1 input to 4 outputs or single 1 input to 8 outputs

+5V DC / 0.5W Control system for access to setup and module status with BITE (Built-In Test Equipment) for use with GYDA Control System

remote Control

• Analogue audio distribution amplifier • Precision gain settings for -12 to +12dB • Allows mixing of 2 inputs in dual 1x4 mode • For balanced AC signals from 3.3Hz to 400kHz

Electrical Input Number of inputs 2 Connector DB15 balanced Impedance > 10k ohm Maximum Input Level +25dBu Common mode rejection >70dB Electrical Output Number of outputs 8 Connector DB25 balanced (Tascam DA88) Frequency response 20 Hz–80kHz ±0.2dB Crosstalk -100dB THD+N > 100dB ref to 20 Hz-20kHz @ 20dBu Impedance 40 ohm nominal. Maximum 55 ohm Maximum Output Level +25dBu Output voltage balance ratio >30dB Output common mode rejection >50dB Switched gain tolerance 0.1dB Gain -12 to +12dB Control Interfaces • Card edge LEDs for voltage monitoring • RS-422 with open protocol • SNMP Agent • WEB interface with GYDA controller. Control system for access to setup and module status with BITE (Built-In Test Equipment) for use with GYDA Control System Electrical Power

100 | network-electronics.com

ana 2 output Microcontroller

• Digital audio distribution amplifier • Configurable as Dual 1x4 or Single 1x8 • Reports signal presence • Supports sample rate from 15 to 96kHz • Supports bit rate from 16kbps to 14Mbps

ana 2 output

ana 2 input

aes 2 output

GEneral Power Control

ana 1 output

+5V / 0.1 W, ±15V / 1.9W


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Modular Distribution Amplifiers

2.4

DA-T140

DAC-MON

Telecom Distribution Amplifier

SDI Distribution Amplifier w/Monitoring Output

output 1 1 0–155Mbps output 2 1 0–155Mbps equaliser input 1 0–155Mbps

Reclocker Bypass Bypass 177M / asi

Microcontroller

CVBs 1 sdi in

CVBs

output 1 0–155Mbps

sdi 1

output 5 1 0–155Mbps

sdi 2

output 6 1 0–155Mbps

sdi

remote Control

• 140Mbps E4, 155Mbps STM-1 distribution amplifier • 6 outputs, non-inverting • Automatic input cable EQ • ITU-T G.703 compatible • Allows distribution of 1-540Mbps signals up to 1000mV amplitude • EQ bypass function • AES-3id support

Electrical Input Data rate NRZ 1 to 540Mbps Data rate RZ 1 to 270Mbps Equalisation Automatic . Cable equaliser can be bypassed to support bitrates down to 1Mbps. Impedance 75 ohm Return loss >15dB (500kHz–270MHz) Signal level nom. 1000mV. apx. 200mV min. when equaliser switched to Bypass Connector BNC Electrical Output Number of outputs 6 Connector BNC Impedance 75 ohm Return loss >15dB (500kHz–270MHz) Jitter max 0.2UI Peak to peak signal level: 1V ± 0.1V Signal polarity 6 non inverting Features Input equaliser Eq. bypass for low bit rates GEneral Power Control

CVBs 2

edH

output 1 0–155Mbps

• 8-bit composite encoder and DA • 3 SDI and 3 composite outputs • Automatic standards detection • EDH monitoring

Digital Serial Input Signal 4:2:2 SMPTE 259M-C, 270Mbps Equalisation Automatic Impedance 75 ohm Return loss >15dB @ 270MHz Signal level nom. 800mV Connector BNC Digital Serial Output Signal 4:2:2 SMPTE 259M-C, 270Mbps reclocked Connector BNC Number of outputs 3 Impedance 75 ohm Return loss >15dB @ 270MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Analogue Output Connector Impedance Formats Signal level Return loss

+5V DC / 3W Max. Control system for access to setup and module status with BITE (Built-In Test Equipment) for use with GYDA Control System

Supported standards ITU-T ITU-T G.703 AES AES-3id (with EQ switched off)

BNC 75 ohm Composite video, PAL 625/50 or NTSC 525/60 1Vp-p >40dB up to 10MHz

Processing Performance Signal path 8/10 bits Sampling 27MHz Video bandwidth 5.5MHz SNR >60dB typical Electrical Power

+5V DC / 2W, -15V DC / 0.6W

network-electronics.com

| 101


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.4 Embedders/De-embedders AV-MUX, AV-MUX-xxT

AV-DMUX, AV-DMUX-R

Digital Audio Embedder

Digital Audio De-embedder

aes1 input

srC i0

aes2 input

srC i0

aes input

aes1 output

aes2 output

aes2 output

aes output

srC i0

aes input

aes1 output

eQ

re-clocker

edH

4-ch multiplexer

4-ch multiplexer

edH

Microcontroller

sdi input

eQ

re-clocker

edH

4-ch de-multiplexer

4-ch de-multiplexer

sdi output

Microcontroller

remote Control

• 4-channel 24-bit AES (8 mono audio) audio embedder • Automatic insertion of sample rate converters • EDH in accordance with SMPTE-RP165 • Embedding in acc. with SMPTE-272M giving maximum compatibility to 3rd party products • Transformer balanced AES in- and outputs Also available • Allows external sampling rates from 16-144kHz with 75ohm w/SRC enabled AES-3id • Can be used as 4-CH embedder, 4-CH backplane de-embedder or 2-CH de-embedder/embedder • 110ohm balanced and 75ohm unbal. version avail. • Optional with optical output (AV-MUX-xxT) GENERAL Power +5V DC / 5.3W Control DIP Switches/GYDA-SC Monitoring Front panel LEDs and GYDA-SC GPI SDI input loss, 4 x AES input loss, laser failure, power good AES Audio Input/ Outputs Number of inputs 4 transf. balanced Number of outputs 4 transf. balanced Format AES3-1992 Impedance 110ohm or 75ohm Connector DB25-110ohm and BNC-75ohm Sampling rates Asynchronous to SDI 16-144kHz w/SRC enabled. Isosynchronous to SDI 48kHz SDI Input / Output Data rate NRZ 270Mbps, 540Mbps Video Frame rates 50 Hz and 60 Hz Input equalisation Auto. up to 35dB Impedance 75ohm Return loss >15dB @270MHz Signal level nom. 800mV Connector BNC Output rise/fall time typ. 650ps Optical Output (optional) Transmission circuit fibre Single Mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 137 Optical power for CWDM modules 0dBm Jitter (UI=unit interval) 0.135 UI max. Connector return loss better than 40dB typ. Maximum reflected power 4% Connector SC/UPC according to SMPTE-297M

102 | network-electronics.com

aes output

aes output

srC i0

optical output sdi input

aes output

optical input

Also available with 75ohm AES-3id backplane

sdi output remote Control

• 4-channel 24-bit AES (8 mono audio) audio de-embedder • EDH in accordance with SMPTE-RP165 • De-embedding in acc. with SMPTE-272M giving maximum compatibility to 3rd party products • Transformer balanced AES outputs • 110ohm balanced and 75ohm unbalanced version available • Optional with optical input (AV-DMUX-R)

GENERAL Power +5V DC / 3.7W Control DIP Switches/GYDA-SC Monitoring Front panel LEDs and GYDA-SC GPI SDI input loss, 2 x audio group, optical input loss, power good Optical Input (optional) Data rate optical 143Mbps – 540Mbps Sensitivity better than –20dBm typ. Optical wavelength 1200-1620nm Transmission circuit fibre Multi mode 50/125um. Single mode 9/125um ­compatible Connector Return loss >40dB w/SM fibre Detector overload threshold min. –6dBm, typ. –3dBm Connector SC/UPC AES Audio Output Number of outputs 8 transf. balanced Format AES3-1992 Impedance 110ohm or 75ohm Connector DB25-110ohm and BNC-75ohm Sampling rates 48kHz SDI Input / Output Data rate NRZ 143-540Mbps Input equalisation Auto. up to 35dB Impedance 75 ohm Return loss >15dB @270MHz Signal level nom. 800mV Connector BNC Number of outputs 1 Output rise/fall time typ. 650ps


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.4

network-electronics.com

| 103


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.4 Embedders/De-embedders

Network Electronics’ AV-HD-XMUX Receives Multiple Honours at IBC 2005 STAR (Superior Technology Award Recipient) – TV Technology Pick Hit award – Broadcast Engineering World Edition

Embedder features

• All-in-one Embedder and De-embedder • Multi-format SD/HD support • Embeds and de-embeds 4 AES signals • AES inputs with sample rate conversion allowing sampling rates from 24 to 96kHz (8kHz-216kHz) • Sample rate conversion bypass for Dolby E audio • Transformer coupled AES in- and outputs • Accepts 20 or 24 bit audio • RS-422 input for embedding of serial data or GPI information • Uninterrupted transport of AES audio in case of loss of SDI signal • Automatic mute of AES in case of AES errors

Optical port features

• Optional optical input and output providing up to 30dB optical budget (SD) • Supports pathological SDI/HDSDI pattern (checkfield) • 1310nm, 1550nm and CWDM lasers available

SD / HD

Optical Transmitter

Optical Receiver

optical fiber

Audio processor/delay features

• Audio matrix and processor allowing group swap, channel shuffle, L/R inversion and channel summing • 4-channel AES variable audio delay line with up to 1.2s delay

Other general features

• Internal video generator • Audio Test Tone generator • Built-in EDH processor • Backplanes for balanced 110 ohm and unbalanced 75 ohm AES available • GYDA enabled for remote control, status monitoring, error reporting and SNMP support

Compliant to the following Broadcast standards

Formats Stamdards SD, 270 Mbps SMPTE 259M, SMPTE 272M-AC (synchronous audio at 48kHz and extended data packets) HD, 1485 Mbps SMPTE 292M, SMPTE 274M, SMPTE 291M, SMPTE 295M SMPTE 296M, SMPTE 299M AES AES3-1996 Optical SMPTE 297M, SMPTE 292M EDH Compliant to SMPTE-RP165

104 | network-electronics.com

Re-clocker SDI/HD Input RS422

EDH/ DeSer.

Deembed.

Embedder

EDH/ Ser.

EQ

SDI/HD Output

EQ Audio Proc.

Rx

SD / HD optical fiber

Tx

RS422

• Audio Matrix • Audio Delay • Group swapping

AES1

SRC

AES2

SRC

AES2

AES3

SRC

AES3

AES4

SRC

AES1

AES4 Microcontroller

Remote Control


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Embedders/De-embedders

2.4

AV-HD-XMUX

HD Digital Audio Embedder Measurement conditions Audio Sampling rate 48 kHz Ambient temperature 25ºC GENERAL Power +5V DC 0.6A 3.0W Control DIP switches, Gyda system controller. GPi Monitoring Front panel LEDs Gyda system controller and GPI. EDH processing Full. Received flags are updated, new CRCs are calculated INPUTS Electrical video input Video Data rate 270Mbps or 1,485Gbps Video frame ratE 24p, 50i, 60i, 50p or 60p Hz. Equalisation Automatic up to 35dB Impedance 75 ohm Return loss >15dB @1,5GHz Signal level nom. 800mV Connector BNC Optical video input Transmission circuit fibre Multi-mode 50/125 µm Optical wavelength 1200–1620nm Maximum Optical power 0 dBm Minimum Optical power HD/SD –25/–30 dBm Return loss Better than 27 dB typ. Maximum reflected power 4% Connector SC/UPC Audio Inputs Number of AES inputs 4 Audio data rate 8 kHz to 216 kHz, converted to 48 kHz if not isochronous to the video input signal Impedance (C1) 110 transformer balanced Connector (C1) 25 pin D-sub. (4 Inputs + 4 outputs) Impedance (C2) 75 ohm unbalanced Connector (C2) 4 x BNC Embedded audio word length: 24 bits Embedded audio Channel status: As received when synchronous. Otherwise fixed Sample rate converter dynamic range: 140 dB(A)

outputs Electrical video output Number of HD/SDI outputs 1 Connector BNC Impedance 75 ohm Return loss > 15dB @1.5GHz Signal level nom. 800mV. Rise/fall time (SD) typically 650ps. @270Mbps Rise/fall time (HD) typically 100ps. @1485Mbps Optical video output Transmission circuit fibre Single Mode Light source F-P/DFB Laser Optical wavelength ver. 13T 1310nm ± 40nm Optical power: -7.5 or 0 dBm Optical wavelength ver. CxxxxT (16 CWDM wavelength acc. to ITU-T G.694.2) Optical power: 0 dBm Jitter (UI=unit interval) 0.135 UI max. Connector SC/UPC HD/SDI digital serial component video Audio outputs Number of AES outputs 4 Audio data rate 48 kHz Impedance (C1) 110 transformer balanced Connector (C1) 25 pin D-sub Impedance (C2) 75 ohm unbalanced Connector (C2) 4 x BNC data outputs Number of RS422 Outputs 1 Connector RJ45 gpi outputs Signals

Power status good, video optical input loss, video electrical input loss Connector RJ45 Signal type Open drain transistor with freewheel diode Positive signal Valid video output Maximum voltage 100 V Maximum current 150 mA

data Inputs RS422 1 Connector RJ45 UART Baud rates 115200, 34800 Data length 5 to 8 bits Parity None, odd or even Stop bits 1, 1.5 or 2 bits GPI mode Raw data sampling frequency 93750bps (supports baud rates up to 19200)

network-electronics.com

| 105


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.4 Embedders/De-embedders AAV-MUX, AAV-MUX-xxT

AAV-DMUX, AAV-DMUX-R

Analogue Audio Embedder

Analogue Audio De-embedder

Bal. input

gain setting

a/d optical input

ana1 ana2 ana

sdi

ana

sdi input

audio 2r audio 2l reclocker deserialiser

de-embedder

optical output

eQ

re-clocker

edH

4-ch multiplexer

edH

Microcontroller

• 4 channel analogue audio embedder • 24 bit converters 107dB(A) typical dynamic range • Cascadable for additional audio channels • Gain adjustments with DIP switches • EDH insertion and handling • 20 or 24 bit embedding • Optional with optical output (AAV-MUX-xxT) GENERAL Power +5V/2.6W / +15V/1W Control DIP switches Monitoring Front panel LEDs and GYDA-SC and GPI EDH Processing Full. Received flags are updated, new CRCs are calculated Embedding level SMPTE 272M-C Synchronous audio at 48kHz and extended data packets (24-bit optional) VIDEO INPUT Video data rate 270Mbps Video frame rate 50Hz or 60Hz Equalisation Automatic up to 35dB Impedance 75 ohm Return loss >15dB @ 270 MHz Signal level Nom. 800 mV Connector BNC AUDIO INPUTS No. of ana. inputs 4 Audio data rate 48kHz Impedance 24 kohm electronically balanced Connector 25-pin D-sub Embedded audio word length: Configurable 20 or 24 bits. Dynamic range* >100dB(A) Crosstalk < -90dB Frequency response 20-Hz-20kHz +0dB –0.1dB Common Mode Rejection Ratio (CMRR): Min 70dB, typ 80dB Group delay 12 samles, 250 us Stopband attenuation 95dB SDI OUTPUT No. of SDI outputs 1 Connector BNC Impedance 75ohm Return loss >15dB @ 270 MHz Signal level Nom. 800 mV Rise/fall time 650ps typ. OPTICAL OUTPUT (optional) Transmission circuit fibre Single mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 137 Optical power for CWDM modules 0dBm Jitter (UI = unit interval) 0.135 UI max. Return loss >40dB Max. reflected power 4% Connector SC/UPC * Dynamic range is calculated as |(THD+N of –60dBFS signal)|+60

106 | network-electronics.com

Y, g or CVBs u, B or Y

Frame synchroniser

sdi output remote Control

audio 1r audio 1l

Y, r or C

BB

CVBs, Y or BB

• 4 channel analogue audio de-embedder • 24 bit converters 106dB(A) typical dynamic range • Cascadable for additional audio channels • Gain adjustments on DIP switches • EDH insertion and handling • Optional with optical input (AAV-DMUX-R) GENERAL Power +5V/2.4W / ±15V/2.2W Control DIP switches Monitoring Front panel LEDs and GYDA-SC and GPI EDH Processing Full. Received flags are updated, new CRCs are calculated De-Embedding level SMPTE 272M-C Synchronous audio at 48kHz and extended data packets (24-bit optional) ANALOGUE AUDIO OUTPUTS Number of outputs 4 electronically balanced Connector D-sub 25 pin female Common mode voltage tolerance ±15 V Output impedance (differential) 50ohm Frequency response 10 Hz–21.5kHz, +0dB -0.1dB Passband ripple ±0.0002dB Group delay 44 samples/0.9ms Stopband attenuation 75dB Dynamic range* Min. 100dB(A) (0dBFS @ +12dBu). Typ. 105dB(A) THD+N @ -1dBFS Max. –80dB, Typ. –87dB Intermodulation dist. @–12dB FS** Max. –80dB, Typ. –87dB Crosstalk Max. –85dB, Typ. –95dB SDI OUTPUT No. of SDI outputs Connector Impedance Return loss Signal level Rise/fall time

1 BNC 75ohm > 15dB @270MHz nom. 800mV. typically 650ps.

OPTICAL INPUT (optional) Transmission circuit fibre Multi Mode 50/125um Single Mode 9/125um compatible Optical wavelength 1200-1620nm Max. Optical power 0dBm Sensitivity -20dBm, typ. -25dBm Return loss better than 40dB typ. Max. reflected power 4% Connector SC/UPC VIDEO INPUT Video Data rate 270Mbps Video frame rate 50Hz or 60Hz Equalisation Automatic up to 35dB Impedance 75ohm Return loss >15dB @270MHz Signal level nom. 800mV Connector BNC * |(THD+N of –60dB FS signal)| + 60 ** SMPTE 4:1 60 Hz + 7kHz


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.4

network-electronics.com

| 107


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.4 Embedders/De-embedders AVA-MUX, AVA-MUX-xxT

Analogue Video and Audio Transport Module

CVBs or Y line 1 Marking CVBs or C

audio 2r

edH processor

embedder

serialiser

audio 2l

sdi

optical output

audio 1r audio 1l

• 4 channel analogue video and audio embedder • Termination switches and loop connectors for input video • Cascadable for additional audio channels • EDH insertion • 20 or 24 bit audio processing • Optional with optical output (AVA-MUX-xxT)

Occupies two slots

Audio Inputs Number of analogue inputs 4 Differential Impedance 25 kohm, electronically balanced Connector DB25 pin, female Maximum signal level Configurable +12dBu to +24dBu (= 0dBFS) Common mode voltage tolerance ±30 V Frequency response 20Hz – 20kHz ±0.dB Passband ripple ±0.035dB Stop band attenuation 95dB Min. 101dB(A) (0dBFS = +12dBu), Dynamic range1) Typ. 107dB(A) THD+N @ -1dB FS Max. -85dB, Typ. < -95dB Intermodulation distortion2) @–12dB FS Max. -90dB Crosstalk Max. -80dB, 20Hz – 20kHz, Typ. -95dB CMRR (0 Hz – 8kHz) Min. 70dB, Typ. 80dB SDI Output Video Data rate Number of SDI outputs Connector Impedance Return loss Signal level Rise/fall time

270Mbps 1 BNC 75ohm > 15dB @270MHz nominal. 800mV typically 650ps

108 | network-electronics.com

Optical Output (optional) Transmission circuit fibre Single Mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ±40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ±40nm Optical power 0dBm Optical wavelength for CWDM See page 137 Optical power 0dBm Jitter (UI=unit interval) Max. 0.135 UI Return loss Typ. > 40dB Maximum reflected power 4% Connector SC/UPC GPI GPI Output

Power good, SDI unlock, Embed error, Audio overload1, Audio overload2 GPI Connector RJ45 Signal type Open collector transistor Maximum voltage 50V Maximum current 400mA if only one output driven, 100mA all outputs driven 1) (THD+N of –60dB FS signal)| + 60 2) SMPTE 4:1 60 Hz + 7kHz


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Embedders/De-embedders

2.4

AVA-DMUX, AVA-DMUX-R

Analogue Video and Audio Transport Module

optical input

sdi

audio 2r audio 2l reclocker deserialiser

audio 1r audio 1l

de-embedder

Y, g or CVBs u, B or Y

Frame synchroniser

Y, r or C

BB

CVBs, Y or BB

• 4 channel analogue video and audio de-embedder • Component and composite video outputs • Cascadable for additional audio channels • EDH handling • Optional with optical input (AVA-DMUX-R) Occupies two slots

Measurement conditions Audio Sampling rate 48kHz Ambient temperature 25 OC Measurement bandwidth 20 Hz-20kHz Detector RMS Input overload level (0dBFS) +18dBu General Power +5V/5.3W, +15V/1.5W, -15V/1.3W Control DIP switches/GYDA-SC Monitoring Front panel LED’s and GYDA-SC EDH processing Full. Received flags are updated, new CRCs are calculated De-embedding level SMPTE S272M C – Synchronous audio at 48kHz and extended data packets Audio Delay 0.67 ms (12+20 audio samples) Video Delay 5.1us in minimum delay mode, 40ms or greater if frame buffer is used SDI Video Input Video Data rate 270Mbps Video frame rate 50 Hz or 60 Hz Equalisation Automatic up to 35dB Impedance 75ohm Return loss >15dB @270MHz Signal level nominally 800mV Connector BNC Optical Input (optional) Transmission circuit fibre Multi Mode 50/125um, Single Mode 9/125um comp. Optical wavelength 1200-1620nm Maximum Optical power 0dBm Sensitivity -20dBm, typ. -25dBm Return loss better than 40dB typ Maximum reflected power 4% Connector SC/UPC

Black Burst reference input Input signal SMPTE 170M / PAL ITU 624-4 Return loss > 35dB up to 5.75MHz Termination 75ohm Video Outputs Number of video outputs 4 Formats YUV+CVBS, RGB+CVBS, YC+Y+CVBS, YC+BB+CVBS Connector BNC Impedance 75ohm Return loss > 35dB up to 5.75 MHz Signal level 1V Audio Outputs Number of analogue outputs 4 electronically balanced Audio sampling frequency 48kHz Impedance 50ohm differential, 5 kohm common mode Connector 25 pin D-sub De-embedded audio word length Up to 24 bits Frequency response1) 20 Hz – 20kHz > 106dB(A) Dynamic range2) THD+N @ 0dBFS better than 0.01%, –80dB 3) better than 0.01%, –80dB Intermodulation distortion Crosstalk < -90dB Noise < –75dBqp CCIR-468 weighted, < –90dBu A-weighted GPI GPI Output

Power good, SDI unlock, de-embed error, audioA invalid, audioB invalid GPI Connector RJ45 Signal type Open collector transistor Maximum voltage 50 V Maximum current 400 mA if only one output driven, 100 mA all outputs driven 1) ±0.1dB relative to the level at 500 Hz 2) |THD+N @ -60dBFS A-weighted| + 60 3) SMPTE IM, 60 Hz + 7kHz 4:1 @ -12dBFS (RMS)

network-electronics.com

| 109


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.4 Video Conversion ADC-SDI

ADC-SDI-CC

NTSC/PAL to SDI Decoder

Video A/D Converter and Decoder

loop

CVBs/lum2 genlock

loop

sdi 1

CVBs/Y adC CVBs/C

Pal/ntsC Field 1 insertion

genlock

red/Pr

sdi 1

adC green/Y

edH

decoder

decoder

sdi 2 Blue/Pb/Crom2

Pal/ntsC Field 1 insertion

edH

Video Buffer

sdi Microcontroller

remote Control

• 10-bit composite to SDI decoder • Automatic standards detection • EDH and field 1 insertion • 2x oversampling (27MHz) • Analogue inputs w/ loop-through, 3 SDI outputs • 3-line adaptive comb filters and selectable filter settings

Input Formats

Return loss Signal Level

Composite Video PAL (625/50) NTSC (525/60) Y/C (S-Video), with active loop-through >35dB up to 5.75MHz nom 1000mV, ± 10mV

Output Signal (3x) 4:2:2 SMPTE 259M-C, 270Mbps Return loss > 15dB @ 270MHz Signal level nom. 800mV Processing Performance Quantisation 10 bits Sampling 27MHz (2x oversampling) Video bandwidth 6MHz SNR (unweight) > 60dB Diff. gain < 0.6% Diff. phase < 1.00 Power

+ 5VDC / 2.2W, - 15VDC / 0.7W

SELECTABLE LUMA/CHROMA SEPARATION FILTERS • Adaptive 3-line comb filter • Fixed 2-line comb filter • Low-pass/bandpass

110 | network-electronics.com

sdi 2 sdi

Microcontroller

remote Control

• 10-bit component, composite or Y/C to SDI converter • Built-in video PROC-AMP • 3 SDI outputs • 5 line adaptive comb filter and selectable filter settings • Automatic standards detection • EDH and field 1 ID insertion

Digital Serial Output Signal type SMPTE 259M / ITU-R BT.601 Connector BNC Impedance 75ohm Return loss >15dB @ 270MHz Jitter < 0.2UI Peak to peak signal level 800mV ± 80mV Composite and Y/C Input Signal type Composite video, PAL 625/50Hz or NTSC 525/60Hz Y / C (S-video) Connector BNC Impedance 75ohm Signal level 1Vp-p Return loss >40dB Component and RGB Input Signal rate 625/50Hz or 525/60Hz Signal type RGB without setup, with separate sync. SMPTE / EBU Y, Cr, Cb Connector BNC Impedance 75ohm Signal level Y = 1Vp-p. Cb, Cr, R, G, B = 0.7Vp-p Return loss >40dB Processing Performance Signal path 10 bits Sampling 27MHz, 2 x oversampling Luma/Chrome separation Selectable 5 line adaptive comb filter or chroma trap filter Video bandwidth 6MHz Hue Accuracy 0.5° typical Colour Sat. Accuracy 0.8% typical Luminance Nonlinearity 0.6% typical SNR (unified weighted) 66dB typical Diff. gain <1.0% Diff. phase <1.0° Video processing delay 3 video lines Power +5V DC / 2.75W, -15V DC / 0.5W


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Video Conversion

2.4

DAC-SDI

SDI to NTSC/PAL Encoder and D/A Converter loop sdi

H-Phase adj. eQ

re-clocker

Frame Buffer

g/Y/CVBs

Filter

10-bit Encoder/ daC

edH

genlock

B/u/Cuma r/V/Chroma CVBs/Y/ Black Burst

Microcontroller

remote Control

• 10-bit SDI to composite encoder and 10-bit SDI to component converter in one product • Field 1 ID insertion • Built-in frame synchroniser w/ sub-carrier and horizontal phase adjustment • Large frame buffer (4 frames) • EDH monitoring • 4x oversampling (54 MHz) • SDI input w/ loop-through, 4 analogue outputs Input Signal 4:2:2 SMPTE 259M-C, 270Mbps, with active loop-through Equalisation Auto. up to 35dB (300m Belden 8182) Return loss > 15dB up to 270MHz Signal level 800mV ±10% Ext. reference Analogue video SMPTE 170M/PAL ITU 624-4 Output Formats

Signal level Return Loss

Composite video PAL (625/50) NTSC (525/60), RGB, YUV, Y/C (S-Video), Composite video and component video provided simultaneously nom. 1Vp-p >35dB up to 5.75MHz

Processing Performance (both Encoder and Converter) Signal path 10 bits Sampling 54 MHz (4x oversampling) Video bandwidth 6MHz SNR (unweigth) > 60dB Diff. gain < 0.5% Diff. phase < 1.00 Power

+ 5VDC / 3.1W, - 15VDC / 0.7W

network-electronics.com

| 111


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.4 Audio Conversion DAC-AES

ADC-AES

Dual Audio D/A Converter

Dual Audio A/D Converter Bal. input

ana1a

aes1

ana2a aes receiver re-clocker

d/a

lowpass filter + gain

ana1B ana2B

gain setting

a/d

aes Format + driver

ana1 ana2

aes1a aes1B

ana

aes2a

ana aes2

ana a ana a

ii

ana B

aes2B aes ref.

Microcontroller

Clock Control Pld aes receiver

ana B

Microcontroller

remote Control

remote Control

• 24-bit high performance AES to analogue audio converter • Two independent converters on one board • Typical dynamic range of 120dBA • Transformer balanced AES inputs • Allows sampling rates from 32–96kHz

• 24-bit high performance analogue audio to AES converter • Two independent converters on one board • Typical dynamic range of 117dBA • Transformer balanced AES outputs • Internal sampling rates 44.1, 48 and 96kHz Also available with 75ohm AES-3id backplane

Analogue outputs Number of outputs 2x 4 electronically balanced Frequency response 20 Hz > –0.1dB > 20kHz Passband ripple ±0.0002dB Group delay 43.5 samples Stopband attenuation 110dB Dynamic range Min. 112dBA, Typ. 120dBA THD+N @ -1dB FS Max. –90dB, Typ. –100dB Crosstalk Max. –100dB, Typ. –110dB Output differential impedance 50 ohm AES Audio Input Number of inputs 2 transformer. balanced Format AES3-1992 Impedance 110ohm Connector DB15-110ohm Sampling rates 29kHz–100kHz GEneral Power Control

+5V/1.4W / ±15V/3.5W Control system for access to set-up and module status with BITE (Built-In Test Equipment)

Analogue inputs Number of inputs 4 electronically balanced Frequency response 20 Hz > –0.1dB > 20kHz Passband ripple ±0.001dB Group delay 37.8 samples Stopband attenuation 110dB Dynamic range Min. 112dBA, Typ. 117dBA THD+N @ -1dB FS Min. –98dB, Typ. –105dB Crosstalk Min. –100dB, Typ. –110dB CMRR Min. 70dB, Typ. 80dB Input differential impedance 10kohm Input common mode impedance 18kohm AES Audio Outputs AND INPUTS Number of outputs 2x2 transformer. balanced Format AES3-1992 Impedance 110ohm Connector DB15-110ohm Internal sampling rates 44.1kHz, 48kHz, 96kHz External synchronisation AES3 on DB15 connector Sync. input impedance 110ohm External sampling rates 29kHz–100kHz GEneral Power Control

112 | network-electronics.com

+5V/2.4W / ±15V/2.1W Control system for access to setup and module status with BITE (Built-In Test Equipment)


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Synchronisation DLY-AES

FRS-SDI

Dual AES Audio Delay

SDI Frame Synchroniser

tracking input

tracking Control

aes 1

srC

aes 2

srC

delay Control input gPi x 2

2.4

dip sw. setting

delay

m U x

delay delay Control

d d

aes 1 (1)

ref

aes 1 (2)

loop

aes 2 (1)

sdi in

sync. sep.

Microcontroller

remote Control

• 2 independent audio delay signal paths • Built-in sample rate converter accepting 32, 41.1, 48kHz • Black-burst and AES-11 reference input • Up to 10s delay at 48kHz • Simultanous fixed delay and externally switchable dynamic delay • Delay tracking input for synchronisation with DACSDI, FRS-SDI or other video devices • 2 AES outputs per delay line • Transformer balanced AES in- and outputs General Power +5V DC approx. 0.3A 1.5W Control DIP switches, GYDA-SC Monitoring Front panel LEDs and GYDA-SC Inputs (AES3-1995) Number 2 Connector DB25 female Sample rate converter word-length 24 bits Sample rates Any between 1/3 and 3 times the reference sample rate Reference Input Format AES11 (AES-3-ID) or analogue video Connector BNC Reference Sample rate from video 48kHz Sample rates from 48, 44.1, 32kHz Outputs (AES3-1995) Number 4 Connector DB25 female Usage Either dual outputs from delay lines 1 & 2 or quad outputs from delay line 1 Delay Minimum delay Maximum tracking delay Maximum fixed delay @ 48kHz Maximum fixed delay @ 44.1kHz Maximum fixed delay @ 32kHz

Frame synchroniser and delay adj.

sdi 1 edH insertor

sdi 2 sdi

sdi loop

reference input Black Burst

reclocker & edHanalyser

aes 2 (2)

Clock Control Pld

aes-11

tracking delay output

genlock

Microcontroller

remote Control

• SDI 10 bit 4:2:2 frame synchroniser with embedded audio handling • Analog Black Burst genlock • Selectable freeze on last good frame or black video on error or on loss of input signal • EDH insertion and handling in accordance with SMPTE-RP165 • Wide delay range, from 128us up to 232ms ­(Sample, H and V adjustment) • Audio delay tracking output • SDI 4:2:2 input with one active loop-through output • 3 x SDI 4:2:2 synchronised outputs • Automatic detection of 525- and 625-line format input DIGITAL SERIAL INPUT Input format 270Mbps scrambled NRZI 4:2:2 video (SMPTE 259M) Equalisation Automatic up to 30dB Signal level 800mV nominal Return loss >15dB @ 270MHz Impedance 75 ohm Connector BNC DIGITAL SERIAL OUTPUT Output format 270Mbps scrambled NRZI 4:2:2 video (SMPTE 259M) Number of outputs 3 synchronised outputs, 1 buffered loop of input Signal level 800mV nominal Rise/fall time typ. 650ps Jitter 0.2UI max. Return loss >15dB @ 270MHz Impedance 75 ohm Connector BNC REFERENCE INPUT Input format

Signal level Impedance Connector

92 samples at 48kHz 230ms 10.6s 11.6s 16.1s

test generator

Black Burst, Composite analogue (NTSC SMPTE 170M / PAL ITU 624-4) 1Vp-p 75 ohm, loop must be terminated with 75 ohm BNC

DELAY ADJUSTMENTS Minimum delay Maximum delay Resolution

120us or 2 video lines 232ms down to video sample resolution

POWER Input voltage

5VDC/3.0W, -15VDC/0.3W

network-electronics.com

| 113


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.4 Synchronisation LIS-SDI

SDI Line Synchroniser

tracking delay output

genlock

ref loop

sdi 1 reclocker & edHanalyser

sdi in

line synchroniser

edH insertor

sdi 2 sdi

sdi loop Microcontroller

remote Control

• SDI 10 bit 4:2:2 line synchroniser • Analogue Black Burst genlock • EDH insertion and handling in accordance with SMPTE-RP165 • SDI 4:2:2 input with one active loop-through output • 3 x SDI 4:2:2 line synchronised outputs • Automatic detection of 525- and 625-line format input DIGITAL SERIAL INPUT Input format 270Mbps scrambled NRZI 4:2:2 video (SMPTE 259M) Equalisation Automatic up to 30dB Signal level 800mV nominal Return loss >15dB @ 270MHz Impedance 75 ohm Connector BNC DIGITAL SERIAL OUTPUT Output format 270Mbps scrambled NRZI 4:2:2 video (SMPTE 259M) Number of outputs 3 synchronised outputs, 1 buffered loop of input Signal level 800mV nominal Rise/fall time typ. 650ps Jitter 0.2UI max. Return loss >15dB @ 270MHz Impedance 75 ohm Connector BNC REFERENCE INPUT Input format

Signal level Impedance Connector

Black Burst, Composite analogue (NTSC SMPTE 170M / PAL ITU 624-4) 1Vp-p 75 ohm, loop must be terminated with 75 ohm BNC

DELAY ADJUSMENTS Minimum delay 39 samples Maximum delay 1 line + 39 samples Resolution down to video sample resolution Power Input voltage

5VDC/3.0W, -15VDC/0.3W

114 | network-electronics.com


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Automatic Changeover Modules HDSDI-CHO-2x1

SDI-CHO-2x1

HD Change-over

SDI Change-over

equaliser

equaliser outputs: Hd/sd1 Hd/sd2

Hd/sd Main input Bypass

Switch 2x1

outputs: sd1 sd2

sd Main input Bypass

Reclocker

equaliser Hd/sd standby input

Hd/sd Hd/sd Bypass 177M / asi

Bypass

Switch 2x1

Reclocker

equaliser sd standby input

sd sd Bypass 177M / asi

Bypass Microcontroller

remote Control

Microcontroller

• Multi-rate change-over • Non-broadcast data rates also supported nonreclocked • Auto change-over on signal loss or reclock error • Configurable change back logic • Reports signal loss and bitrate • GPI control and alarms • Integrated DA with 4 re-clocked HD/SDI outputs Electrical Input Number of input 2 Data rate NRZ 1 to 1485Mbps Equalisation Automatic. Cable reclocker can be bypassed to support bit rates down to 1Mbps Impedance 75 ohm Return loss >= 15dB @ 1485MHz Signal level nom. 800mV. App. 200mV min. when equaliser switched to Bypass Connector BNC Electrical Output Number of outputs 4 Connector BNC Impedance 75 ohm Return loss >= 15dB @ 1485MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity 2 outputs non inverting, 2 outputs inverting Features Re-clocking Automatic clock rate detection. Supported clock rates: 143, 177, 270, 360, 540 and 1485Mbps GEneral Power Control

2.4

+5V DC / 3W Max. Control system for access to set-up and module status with BITE (Built-In Test Equipment)

remote Control

• SDI change-over • Non-broadcast data rates also supported nonreclocked • Auto change-over on signal loss or reclock error • Configurable change back logic • Reports signal loss and bitrate • GPI control and alarms • Integrated DA with 4 re-clocked SDI outputs Electrical Signal Inputs Number of inputs 2 Standard SMPTE 259M Data Rate 1Mbps–540Mbps Connector 75 ohm BNC female Impedance 75 ohm nominal Return Loss > 15dB (5MHz-270MHz) Cable Equalisation 0 to 300m typical Belden 8281A Electrical Signal Outputs Number of outputs 4 Connector 75 ohm BNC female Signal Level 800mVp-p ±10% Signal Polarity 2 outputs non-inverting, 2 outputs inverting Impedance 75 ohm nominal Return Loss > 15dB (5MHz-270MHz) Features Re-clocking rates 143, 177, 270, 360, 540Mbps Supported standards SMPTE 259M, 305.2M, 344M, 310M,DVB-ASI EN50083-9, AES-3id Re-clocking Configurable automatic mute or bypass when not locked Input equaliser Bypass for non-video formats Control Interfaces Control Control system for access to set-up and module status with BITE (Built-In Test Equipment) Electrical Power

+5V DC

Supported standards SMPTE SMPTE292M, SMPTE259M, SMPTE305.2M, SMPTE310M, SMPTE344M DVB-ASI EN50083-9

network-electronics.com

| 115


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.5 Signal Transport

Flashlink – There is no better choice for your optical network – From the simplest point-to-point connection to complex broadcast contribution networks

Medical images transferred live from the Operations Rooms from St Olavs Hospital to SONY 4K projector at Trondheim Kino June 14, 2006.

Through the years Flashlink has proven to be the ideal solution to solve all kinds of fibre optic signal transport challenges. When it comes to video infrastructure, customers all over the world are already benefiting from the Flashlink features. Helping out troubled engineers challenged by earth loops on campus networks by replacing coaxial connections with fibre connection providing galvanic isolation is just an example of how Flashlink can be used. Flashlink is also used successfully as the building block for nationwide complex broadcast contribution fibre networks with more than 1000 Flashlink modules in operation using GYDA’s SNMP interface for monitoring and control.

116 | network-electronics.com

Application areas:

• Broadcast contribution • Campus networks • DVB Backhaul and production • DVB-ASI distribution • Repeaterless point-to-point HD-SDI or SD-SDI connections • Digital video networks • Remote studios and outside broadcast • Field production and news gathering • Telecom infrastructure, Metro- and Wide Area Networks • General purpose digital video transport services

Signal formats:

• HD-SDI, SD-SDI, DVB-ASI, M2S, SMPTE 310M, SDTi, PAL, NTSC, L-band • AES, MADI and analogue audio • 10/10/1000Mbps Ethernet, Fibre Channel, RS-422 and GPI • SDH/SONET up to STM-16/OC48c, E4 and others


SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Automatic Changeover Modules

2.4

See for yourself how you can benefit from the extensive features of the Flashlink system:

Feature

Function

Benefit

Multiformat Broadcast, Telecom and Datacom

Dedicated modules for different signals

Offer one or more of these services with

platform

formats, the MR-TR range supports all

potential future expansion with the same

formats optically

platform

Multi mode fibre on receivers allow for use

Install new fibre cables or use existing

with single or multi mode fibres

infrastructure

GYDA System Controller with TCP/IP web

Dynamic web site generation by system

Use web interface for full access to installed

interface

controller gives access to remotely control

system from control site, no special software

and configure system

needed

GYDA operates as an SNMP agent

Easy integration into larger control systems

Single mode and multi mode compatible

All Flashlink modules have Simple Network Management Protocol support via GYDA Extensive monitoring possibilities

using SNMP GPI output, front card LED’s and RS-422

Tailor monitoring to existing studio needs

control Hot-swappable architecture

Change modules without powering down

Little or no down-time on running services

system Modular and easily expandable system

10 slots per Frame, hot swappable, add

Grow with the system, no need for huge

modules without powering down on-air

initial investments

frames Supports pathological video patterns without

Extremely good low frequency response

Robust signal transport system

Any wavelength scheme, 1310nm and 1550nm,

Add the number of wavelengths needed

Flexible system design, tailored for specific

CWDM and DWDM

per fibre according to current needs

customer needs

Very compact 2RU rack mount solution

Industry leading rack size compactness

Saves rack space with increased packing

scrambling

density Dual redundant power supply

Load sharing ensures working frame as

Lower risk for power loss during critical

long as more than one of the two powers

operations

operate normally AC and/or DC power supply

AC and/or DC operation

Maximum power redundancy, flexible power sources

Dual converters for SD-SDI and HD-SDI

Two independent signal paths per module

Increased packing density, maximum return on investment

Our company vision is: Network Electronics will be the best partner for signal transport needs to the professional video and broadcast industry. Do not hesitate to contact your nearest representative to discuss solutions for your video infrastructure.

network-electronics.com

| 117


SIGNAL TRANSPORT

2.5 Optical Converters SDI-EO

SDI Electrical to Optical Converter

Optical Transmitter

sdi input 19. 5 0Mbps

optical output

equaliser

distribution amplifier 2 x sdi output

• Built-in dual output Distribution Amplifier • High performance laser for the long haul • DVB-ASI compatible • SMPTE 259M/297M compliant

Inputs Data rate NRZ 19.4Mbps – 540Mbps Equalisation Auto. up to 35dB Impedance 75 ohm Return loss >15dB @270MHz Signal level nom. 800mV Connector BNC SDI Output Number of outputs Connector Impedance Return loss Signal level Rise/fall time

2 BNC 75 ohm > 15dB @270MHz nom. 800mV typ. 650ps

DWDM

CWDM

SDI-EO-13T/15T

GEneral Power +5V DC / 10W Max. 5W typically Control Control system for access to set-up and module status with BITE (BuiltIn Test Equipment)

GEneral Power +5V DC / 1.6W Control Control system for access to set-up and module status with BITE (BuiltIn Test Equipment)

GEneral Power +5V DC / 1.6W Control Control system for access to set-up and module status with BITE (BuiltIn Test Equipment)

Optical Output Transmission circuit fibre Single Mode 9/125um Light source DFB Laser Optical centre wavelength See page 137 Optical power 0dBm (optionally +5dBm) Max. wavelength drift ± 0.16nm Jitter (UI=unit interval) 0.135 UI max. @ 270Mbps Connector return loss Better than 40dB typ. Maximum reflected power 4% Connector SC/UPC acc. to SMPTE 259M

Optical Output Transmission circuit fibre Single Mode 9/125um Light source DFB Laser Optical wavelength See page 137 Optical power 0dBm Jitter (UI=unit interval) 0.135 UI max. Connector return loss Better than 40dB typ. Maximum reflected power 4% Connector SC/UPC according to SMPTE-297M

Optical Output Transmission circuit fibre Single Mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Jitter (UI=unit interval) 0.135 UI max. Connector return loss Better than 40dB typ. Maximum reflected power 4% Connector SC/UPC according to SMPTE-297M

118 | network-electronics.com


SIGNAL TRANSPORT

Optical Converters

2.5

SDI-EO-2

Dual SDI Electrical to Optical Converter SD/ASI Input 1 19.4540Mbps

SD/ASI Input 2 19.4540Mbps

Equaliser

Optical Transmitter Optical Output 1

Bypass

Equaliser

SD/ASI Output 1 19.4540Mbps

# 2x2

Optical Transmitter Optical Output 2 SD/ASI Output 2 19.4540Mbps

Bypass

Microcontroller

Remote Control

• High-density packaging in the ultra compact 2RU frame • 1310nm, 1550nm and CWDM laser available • High performance laser for the long haul • Full DVB-ASI compatibility • Built-in crossover allowing wavelength swap and emergency switching • Active looped SDI output Inputs Data rate NRZ 19.4 to 540Mbps Equalisation Automatic. Cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps Impedance 75 ohm Return loss >15dB @ 270MHz Signal level nom. 800mV Connector BNC General Power Control

+5V DC / 3.5W Max. Control system for access to setup and module status with BITE (Built-In Test Equipment)

Electrical Output Number of outputs 1 per converter Connector BNC Impedance 75 ohm Return loss >15dB @ 270MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity Non inverting Optical Output Transmission circuit fibre Single Mode Light source F-P / DFB laser Optical power -7.5dBm @1310nm, 0dBm (DFB laser) Optical centre 1310, 1550 or CWDM wavelength See page 137 Temp. range 0 to +40 °C Jitter (UI=Unit Interval) 0.135 UI max. @ 270Mbps, Connector return loss >40dB w/SM fibre Maximum reflected power 4% Connector SC/UPC Standards Supported standards for electrical and optical ports: SMPTE259M, SMPTE297, SMPTE305M, SMPTE310 DVB-ASI EN50083-9

network-electronics.com

| 119


SIGNAL TRANSPORT

2.5 Optical Converters SDI-OE-S / SDI-OE-L / MF-OE-NRC

SDI-OE-2

SDI Optical to Electrical Converter

Dual SDI Optical to Electrical Converter Optical receiver Optical Input 1

Optical Receiver sdi input Processor optical input

reclocker

2 x ASI / 2 x SD / HD Output 1 19.4540Mbps

Reclocker Bypass 177M/ASI

distribution amplifier

#

2 x sdi output 19. –5 0Mbps

Optical receiver

2x2

Optical Input 2

2 x ASI / 2 x SD / HD Output 2 19.4540Mbps

Reclocker Bypass 177M/ASI

Microcontroller

• High sensitivity receiver • Buil-in dual output Distribution Amplifier • DVB-ASI compatible • SMPTE 259M/297M compliant

Optical Input Data rate optical 19.4Mbps – 540Mbps Sensitivity SDI-OE-S –20dBm typ. SDI-OE-L better than –30dBm typ. MF-OE-S-NRC –20dBm typ. Maximum input power SDI-OE-S -6dBm SDI-OE-L 0dBm Optical wavelengths 2nd & 3rd opt. windows, 1200-1620nm Transmission Circuit Fibre Multi Mode 50/125um, Single Mode 9/125um compatible Return loss Better than 40dB w/Single Mode fibre (typ.) Detector overload threshold min. –6dBm, typ. –3dBm Connector SC/UPC GEneral Power SDI-OE-S and MF-OE-S-NRC + 5V DC /1.7W Power SDI-OE-L +5V DC/1.6W, -15V DC/0.15W Control Control system for access to set-up and module status with BITE (Built-In Test Equipment) SDI Output Number of outputs Connector Impedance Return loss Signal level Rise/fall time Jitter (UI= Unit Interval)

2 BNC 75 ohm > 15dB @270MHz nom. 800mV typ. 650ps 0.2 UI max.

120 | network-electronics.com

Remote Control

• High-density packaging in the ultra compact 2RU frame • High sensitivity receiver • Full DVB-ASI compatibility • Built-in crossover allowing wavelength swap and emergency switching • Re-clocker bypass for non-video formats • 2 Output Distribution Amplifier Optical Input Data rate optical 19.4 to 540Mbps Sensitivity: for SDI (270Mbps) better than –30dBm Detector overload threshold min. -6dBm Optical wavelength 2nd & 3rd opt. windows 1200–1620nm Transmission circuit fibre Multi Mode 50/125um, Single Mode 9/125um compatible Connector return loss >40dB w/SM fibre Detector damage threshold >+1dBm Connector SC/UPC General Power Control

Electrical Output Number of outputs Connector Impedance Return loss Jitter Peak to peak signal level Signal polarity

+5V DC / 3.2W Max. Control system for access to setup and module status with BITE (Built-In Test Equipment)

2 per converter BNC 75 ohm >15dB @ 270MHz max 0.2UI 0.8V ± 0.1V 2 non inverting

Standards Supported standards for electrical and optical ports: SMPTE 292, SMPTE259M, SMPTE297, SMPTE305M, SMPTE310, DVB-ASI EN50083-9


SIGNAL TRANSPORT

Optical Converters

2.5 SDI-TR

SDI Optical Converter and Transponder optical transmitter optical receiver optical input

input Processor

optical output

sdH / Cdr 3x1 mUx

equaliser

Sd/aSI CdR distribution amplifier

sd/asi input 19. -5 0Mbps

1 x asi / 2 x sd output

Bypass 177M / asi

Bypass

Microcontroller

input / Cdr select

remote Control

• Multirate optical to optical transponder for 19.4– 622Mbps • O/E, E/O converter • 1310nm and 1550nm • Supports SDI, HD-SDI, SMPTE 310 MPEG, DVB-ASI, SDH/SONET, Gigabit Ethernet, Fibre channel and many other signal formats • Performs 3R Regeneration

The SDI-TR is a multi bit-rate converter and transponder module providing high performance media conversion for various broadcast signals from 19.4Mbps up to 622Mbps. The unit can be configured as an Electrical to Optical or Optical to Electrical converter, or as an Optical to Optical Transponder. This state of the art unit offers a high performance optics. Unmatched signal accuracy, even in critical applications with pathological signal patterns makes the SDI-TR the first choice for all optical transport demands. The SDI-TR can transport all SD signal formats in addition to DVB-ASI and SMPTE 310. In addition it performs optical refreshing, reclocking and wavelength swapping for SDH/SONET signals at 155Mbps and 622Mbps.

The input sensitivity is typically better than –30dBm. This will allow for a range of 80km, with a 16-channel DWDM system using high quality Single Mode fibre at 270Mbps. The optical output is equipped with a Fabry-Perot laser diode for 1310nm or a DFB laser for CWDM. The open system platform of Network Electronics’ flashlink system allows easy interoperability with third party fibre optical systems. The electrical input is equipped with a multi rate cable equaliser providing an equalisation of typically 300m of high quality coax cable at 270Mbps. A distribution amplifier with 2 outputs reduces the need for additional DAs (for DVB-ASI only one can be used).

Optical Input Data rate optical 19.4 to 622Mbps Sensitivity for SDI (270Mbps) Better than –30dBm for SDH / SONET (622Mbps) Better than –25dBm Detector overload threshold min. -3dBm Optical wavelength 1200-1620nm Transmission circuit fibre Multi Mode 50/125um Single Mode 9/125um compatible Connector return loss >40dB w/SM fibre Detector damage threshold >+1dBm Connector SC/UPC

General Power Control

Optical Output Transmission circuit fibre Single Mode 9/125um Light source F-P/DFB Laser Optical power -7.5dBm or 0dBm @ 1310nm Optical centre wavelength 1310nm ± 20nm Temp. range 0 to +50 oC Jitter (UI=Unit Interval) 0.135 UI max. @ 270Mbps Connector return loss >40dB w/SM fibre Maximum reflected power 4% Connector SC/UPC

+5V DC / 3W Max. Control system for access to setup and module status with BITE (Built-In Test Equipment)

Electrical Input Data rate NRZ 19.4 to 540Mbps Equalisation Automatic Cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps. Impedance 75 ohm Return loss >15dB @ 270MHz Signal level nom. 800mV Connector BNC Electrical Output Number of outputs Connector Impedance Return loss Jitter Peak to peak signal level Signal polarity

2 BNC 75 ohm >15dB @ 270MHz max 0.2UI 0.8V ± 0.1V 1 non inverting, 1 inverting

Standards Supported standards for electrical and optical ports: SMPTE SMPTE259M, SMPTE297M, SMPTE305M, SMPTE310M, DVB-ASI EN50083-9 Additional supported standards for the optical ports, only ­optical transponder configuration: SDH / SONET STM1 / OC3, STM4 / OC12

network-electronics.com

| 121


SIGNAL TRANSPORT

2.5 Optical Converters (for CWDM and DWDM) SDI-TR-D15xx and SDI-TR-C1xxx

SDI Optical Converter and Transponder optical transmitter optical receiver

input Processor

optical input

optical output

sdH / Cdr 3x1 mUx

equaliser

Sd/aSI CdR distribution amplifier

sd/asi input 19. -5 0Mbps

1 x asi / 2 x sd output

Bypass 177M / asi

Bypass input / Cdr select

Microcontroller

• Multirate optical to optical transponder for 19.4–622Mbps • O/E, E/O converter • CWDM and DWDM laser available • Supports SDI, HD-SDI, SMPTE 310 MPEG, DVB-ASI, SDH/SONET, Gigabit Ethernet, Fibre channel and many other signal formats • Performs 3R Regeneration

remote Control

The SDI-TR-D15xx is a multi bit-rate converter and transponder module providing high performance media conversion for various signal formats from 19.4Mbps up to 622Mbps. The unit can be configured as an Electrical to Optical or Optical to Electrical converter, or as an Optical to Optical Transponder. This state of the art unit offers a high sensitivity PIN diode and narrowband ultrastabilised DWDM laser technology or CWDM laser. Unmatched signal accuracy, even in critical applications with pathological signal patterns makes the SDI-TR-D15xx the first choice for all optical transport demands. The flashlink DWDM system uses only wavelengths in accordance with the ITU-T G.694.1 recommendation. If the module is to be used together with existing third party DWDM systems the exact wavelength needs to be specified. The SDI-TR-D15xx can transport all SD signal formats in addition to DVB-ASI and SMPTE 310. In addition it performs optical

refreshing, reclocking and wavelength swapping for a DWDM or CWDM wavelength for SDH/SONET up to 622Mbps. The input sensitivity is typically better than –30dBm. This will allow for a range of 80km, with a 16 channel DWDM system, using high quality Single Mode fibre at 270Mbps. The optical output comes with a sophisticated 1550nm DFB DWDM or CWDM laser covering the demands of short, medium and long haul applications. The open system platform of Network Electronics DWDM and CWDM multiplexing technology allows easy interoperability with third party fibre optical systems. The electrical input is equipped with a multi rate cable equaliser providing an equalisation of typically 300m of high quality coax cable at 270Mbps. A distribution amplifier with 2 outputs reduces the need for additional DA’s (for DVB-ASI only one can be used).

Optical Input Data rate optical 19.4 to 622Mbps Sensitivity: for SDI (270Mbps) Better than –30dBm for SDH / SONET (622Mbps) Better than –25dBm Detector overload threshold min. -3dBm Optical wavelength 1200-1620nm Transmission circuit fibre Multi Mode 50/125um, Single Mode 9/125um compatible Connector return loss >40dB w/SM fibre Detector damage threshold >+1dBm Connector SC/UPC

General Power Control

Optical Output Transmission circuit fibre Single Mode 9/125um Light source DFB Laser Optical power 0dBm (optionally +5dBm) Optical centre wavelength for DWDM See page 137 Optical centre wavelength for CWDM See page 137 Max. wavelength drift +/- 0.16nm (DWDM) Temp. range 0 to +40 oC Jitter (UI=Unit Interval) 0.135 UI max. @ 270Mbps Connector return loss >40dB w/SM fibre Maximum reflected power 4% Connector SC/UPC

122 | network-electronics.com

+5V DC / 10W Max. 5W typically Control system for access to setup and module status with BITE (Built-In Test Equipment)

Electrical Input Data rate NRZ 19.4 to 540Mbps Equalisation Automatic Cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps. Impedance 75 ohm Return loss >15dB @ 270MHz Signal level nom. 800mV Connector BNC Electrical Output Number of outputs 2 Connector BNC Impedance 75 ohm Return loss >15dB @ 270MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity 1 non inverting, 1 inverting Standards Supported standards for electrical and optical ports: SMPTE SMPTE259M, SMPTE297M, SMPTE305M, SMPTE310M, DVB-ASI EN50083-9 Additional supported standards for the optical ports, only ­optical transponder configuration: SDH / SONET STM1 / OC3, STM4 / OC12


SIGNAL TRANSPORT

2.5

network-electronics.com

| 123


SIGNAL TRANSPORT

2.5 Optical Converters HD-EO-D15xx / HD-EO-C1xxx / HD-EO-13T/15T

HD-SDI Electrical to Optical Converter

Optical Transmitter optical output

equaliser Hd-sdi input 19. -1 85Mbps

reclocker distribution amplifier 2 x Hd-sdi output

• Built-in dual output Distribution Amplifier • High performance laser for the long haul • DVB-ASI compatible • SMPTE 259M/292M compliant

Electrical Input Data rate NRZ 19.4 to 1485Mbps Equalisation Automatic. Cable equaliser and ­reclocker can be bypassed to ­support bitrates down to 2Mbps Impedance 75ohm Return loss >15dB @ 1485MHz Signal level nom. 800mV Connector BNC Electrical Output Number of outputs Connector Impedance Return loss Jitter Peak to peak signal level Signal polarity

2 BNC 75 ohm >15dB @ 1485MHz max 0.2UI 0.8V ± 0.1V 1 non inverting, 1 inverting

Standards Supported standards for electrical and optical ports: SMPTE: SMPTE292, SMPTE259M, SMPTE297M, SMPTE305M, SMPTE310M DVB-ASI: EN50083-9 DWDM: ITU-T G.694.1 CWDM: ITU-T G.694.2

DWDM

CWDM

HD-EO-13T/-15T

GEneral Power +5V DC / 10W Max. 5W typically Control Control system for access to setup and module status with BITE (Built-In Test Equipment)

GEneral Power +5V DC / 3W Max. Control Control system for access to setup and module status with BITE (Built-In Test Equipment)

GEneral Power +5V DC / 3W Max. Control Control system for access to setup and module status with BITE (Built-In Test Equipment)

Optical Output Transmission circuit fibre Single Mode 9/125um Light source DFB Laser Optical power 0dBm (optionally +5dBm) Optical centre wavelength See page 137 Max. wavelength drift ± 0.16nm Jitter (UI=unit interval) 0.135 UI max. @ 270Mbps 0.2 UI max. @ 1485Mbps Connector return loss Better than 40dB typ. Maximum reflected power 4% Connector SC/UPC acc. to SMPTE 259M

Optical Output Transmission circuit fibre Single Mode 9/125um Light source DFB Laser Optical power 0dBm Optical centre wavelength for CWDM See page 137 Max. wavelength drift ± 6nm Jitter (UI=unit interval) 0.135 UI max. @ 270Mbps 0.2 UI max. @ 1485Mbps Connector return loss Better than 40dB typ. Maximum reflected power 4% Connector SC/UPC acc. to SMPTE 259M

Optical Output Transmission circuit fibre Single Mode 9/125um Light source F-P laser Optical power –7.5dBm or –3dBm @ 1310nm 0dBm @ 1550nm (DFB laser) Optical centre wavelength 1310nm or 1550nm Max. wavelength drift +/- 20nm @ temp. range 0 to +50 °C Jitter (UI=Unit Interval) 0.135 UI max. @ 270Mbps 0.2 UI max. @ 1485Mbps Connector return loss >40dB w/SM fibre Maximum reflected power 4% Connector SC/UPC acc. to SMPTE 259M

124 | network-electronics.com


SIGNAL TRANSPORT

Optical Converters

2.5

HD-EO-2

Dual HD-SDI Electrical to Optical Converter SD/HD/ASI Input 1 19.41485Mbps

SD/HD/ASI Input 2 19.41485Mbps

Equaliser

Optical Transmitter Optical Output 1

Reclocker Bypass

Equaliser

SD/HD/ASI Output 1 19.41485Mbps

Bypass 177M/ASI

# 2x2

Optical Transmitter Optical Output 2

Reclocker Bypass

SD/HD/ASI Output 2 19.41485Mbps

Bypass 177M/ASI

Microcontroller

Remote Control

• High-density packaging in the ultra compact 2RU frame • 1310nm, 1550nm and CWDM laser available • High performance laser for the long haul • Full DVB-ASI compatibility • Built-in crossover allowing wavelength swap and emergency switching • Multiformat Re-clocking Electrical Input Data rate NRZ 19.4 to 1485Mbps Equalisation Automatic. Cable equaliser and ­reclocker can be bypassed to support bitrates down to 2Mbps. Impedance 75 ohm Return loss >15dB @ 1485MHz Signal level nom. 800mV Connector BNC General Power Control

+5V DC / 3.5W Max. Control system for access to setup and module status with BITE (Built-In Test Equipment)

Electrical Output Number of outputs 1 per converter Connector BNC Impedance 75 ohm Return loss >15dB @ 1485MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity Non inverting Optical Output Transmission circuit fibre Single Mode Light source F-P / DFB laser Optical power -7.5dBm @1310nm, 0dBm (DFB laser) Optical centre wavelength 1310nm or 1550nm Max. wavelength drift +/- 6nm Temp. range 0 to +50 °C Jitter (UI=Unit Interval) 0.135 UI max. @ 270Mbps, 0.2 UI max. @ 1485Mbps Connector return loss >40dB w/SM fibre Maximum reflected power 4% Connector SC/UPC Standards Supported standards for electrical and optical ports: SMPTE: SMPTE 292, SMPTE259M, SMPTE297, SMPTE305M, SMPTE310 DVB-ASI: EN50083-9

network-electronics.com

| 125


SIGNAL TRANSPORT

2.5 Optical Converters HD-OE

HD-OE-2

HD-SDI Optical to Electrical Converter

Dual HD-SDI Optical to Electrical Converter Optical receiver Optical Input 1

Optical receiver optical input

reclocker

1 x ASI / 2 x SD / HD Output 1 19.41485Mbps

Reclocker

distribution amplifier

Bypass 177M/ASI

#

2 x Hd-sdi output 19. -1 85Mbps

Optical receiver

2x2

Optical Input 2

1 x ASI / 2 x SD / HD Output 2 19.41485Mbps

Reclocker Bypass 177M/ASI

Microcontroller

• High sensitivity receiver • Buil-in dual output Distribution Amplifier • DVB-ASI compatible • SMPTE 259M/292M compliant

Optical Input Data rate optical 19.4 to 1485Mbps Sensitivity for HD-SDI (1485Mbps) Better than –20dBm Sensitivity for SDI (270Mbps) Better than –25dBm Detector overload threshold Min. -3dBm Optical wavelength 2nd & 3rd opt. windows 1200–1620nm Transmission circuit fibre Single Mode 9/125um Connector return loss >40dB w/SM fibre Detector damage threshold >+1dBm Connector SC/UPC GEneral Power Control

Electrical Output Number of outputs Connector Impedance Return loss Jitter Peak to peak signal level Signal polarity

+5V DC / 3W Max. Control system for access to setup and module status with BITE (Built-In Test Equipment)

2 BNC 75 ohm >15dB @ 1485MHz max 0.2UI 0.8V ± 0.1V 1 non inverting, 1 inverting

Standards Supported standards for electrical and optical ports: SMPTE 292M, SMPTE259M, SMPTE297M, SMPTE305M, SMPTE310M, DVB-ASI EN50083-9

126 | network-electronics.com

Remote Control

• High-density packaging in the ultra compact 2RU frame • High sensitivity receiver • Full DVB-ASI compatibility • Built-in crossover allowing wavelength swap and emergency switching • 2 Output Distribution Amplifier • Multiformat Re-clocking • Re-clocker bypass for non-video formats Optical Input Data rate optical 19.4 to 1485Mbps Sensitivity: for HD-SDI (1485Mbps) Better than –20dBm for SDI (270Mbps) Better than –25dBm Detector overload threshold min. -6dBm Optical wavelength 2nd & 3rd opt. windows 1200–1620nm Transmission circuit fibre Single Mode 9/125um Connector return loss >40dB w/SM fibre Detector damage threshold >+1dBm Connector SC/UPC General Power Control

Electrical Output Number of outputs Connector Impedance Return loss Jitter Peak to peak signal level Signal polarity

+5V DC / 3.2W Max. Control system for access to setup and module status with BITE (BuiltIn Test Equipment)

2 per converter BNC 75 ohm >15dB @ 1485MHz max 0.2UI 0.8V ± 0.1V 1 non inverting

Standards Supported standards for electrical and optical ports: SMPTE 292, SMPTE259M, SMPTE297, SMPTE305M, SMPTE310, DVB-ASI EN50083-9


SIGNAL TRANSPORT

Optical Converters

2.5 MR-TR-13T

HD Multi Rate Optical Converter and Transponder optical transmitter optical receiver optical input equaliser

input Processor

sdH / 1000BaselX Cdr

optical output 3x1 mUx

Hd/Sd/aSI CdR distribution amplifier

sd/Hd/asi input 19. –1 85Mbps

1 x asi / 2 x sd / Hd output

Bypass 177M / asi

Bypass input / Cdr select

Microcontroller

remote Control

• Multirate optical to optical transponder for 19.4–1485Mbps • O/E, E/O converter • 1310nm • Supports SDI, HD-SDI, SMPTE 310 MPEG, DVB-ASI, SDH/ SONET, Gigabit Ethernet, Fibre channel and many other signal formats • Performs 3R Regeneration

The MR-TR is a multi bit-rate converter and transponder module providing high performance media conversion for various broadcast signals from 19.4Mbps up to 1485Mbps. The unit can be configured as an Electrical to Optical or Optical to Electrical converter, or as an Optical to Optical Transponder. This state of the art unit offers a high performance optics. Unmatched signal accuracy, even in critical applications with pathological signal patterns makes the MR-TR the first choice for all optical transport demands. The MR-TR can transport all HD and SD signal formats in addition to DVB-ASI and SMPTE 310. In addition it performs optical refreshing, reclocking and wavelength swapping for SDH/SONET signals at 155Mbps and 1485Mbps.

The input sensitivity is typically better than –20dBm. This will allow for a range of 50km, with a 16-channel DWDM system using high quality Single Mode fibre at 1485Mbps. The optical output is equipped with a Fabry-Perot laser diode for 1310nm. The open system platform of Network Electronics’ flashlink system allows easy interoperability with third party fibre optical systems. The electrical input is equipped with a multi rate cable equaliser providing an equalisation of typically 100m of high quality coax cable at 1485Mbps. A distribution amplifier with 2 outputs reduces the need for additional DAs (for DVB-ASI only one can be used).

Optical Input Data rate optical 19.4 to 1485Mbps Sensitivity: for HD-SDI (1485Mbps) better than –20dBm for SDI (270Mbps) better than –25dBm for SDH /SONET (622Mbps) better than –25dBm for 1000BaseLX (1250Mbps) better than –25dBm Detector overload threshold min. -3dBm Optical wavelength 2nd & 3rd opt. windows 1200-1620nm Transmission circuit fibre Single Mode 9/125um Connector return loss >40dB w/SM fibre Detector damage threshold >+1dBm Connector SC/UPC

Electrical Input Data rate NRZ 19.4 to 1485Mbps Equalisation Automatic Cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps. Impedance 75 ohm Return loss >15dB @ 1485MHz Signal level nom. 800mV Connector BNC

Optical Output Transmission circuit fibre Single Mode 9/125um Light source F-P/DFB laser Optical power –7.5dBm or –3dBm @1310nm Optical centre wavelength 1310nm ± 20nm Optical power 0dBm Temp. range 0 to +50 OC Jitter (UI=Unit Interval) 0.135 UI max. @ 270Mbps, 0.2 UI max. @ 1485Mbps Connector return loss >40dB w/SM fibre Maximum reflected power 4% Connector SC/UPC General Power Control

Electrical Output Number of outputs Connector Impedance Return loss Jitter Peak to peak signal level Signal polarity

2 BNC 75 ohm >15dB @ 1485MHz max 0.2UI 0.8V ± 0.1V 1 non inverting, 1 inverting

Standards Supported standards for electrical and optical ports: SMPTE: SMPTE292M, SMPTE259M, SMPTE297M, SMPTE305M, SMPTE310M, DVB-ASI: EN50083-9 Additional supported standards for the optical ports, only ­optical transponder configuration: SDH / SONET: STM1 / OC3 and STM4 / OC12 Gigabit Ethernet: IEEE 802.3, 1000BaseLX for SM fibre

+5V DC / 3W Max. Control system for access to setup and module status with BITE (Built-In Test Equip.)

network-electronics.com

| 127


SIGNAL TRANSPORT

2.5 Optical Converters AES-EO-13T/15T

AES-OE

AES Electrical to Optical Converter

AES Optical to Electrical Converter

slicing & Filtering aes input

limiter Optical Transmitter

optical output

• Transport AES separately • 1310, 1550nm and CWDM versions • Electrical output for use in DWDM systems

Inputs Signal format AES-3 (AES/EBU) Impedance 110 ohm (transformer balanced) Connector DB25 female (Tascam pin layout) GEneral Power +5V DC / 1.5W Control RS-422 with protocol for use with GYDA System Controller Control system has access to set-up and module status with BITE (Built-In Test Equipment) Optical Output Transmission circuit fibre Single Mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 137 Optical power for CWDM modules 0dBm Maximum reflected power 4% Connector SC/UPC, Return Loss better than 40dB

128 | network-electronics.com

optical input

output Buffer

Optical Receiver

aes output

• Transport AES separately • Multi mode or single mode • 1200-1620nm input

Output Signal format AES-3 (AES/EBU) Impedance 110 ohm (transformer balanced) Jitter < 20ns Connector DB25 female (Tascam pin layout) GEneral Power +5V DC / 1.4W Control RS-422 with protocol for use with GYDA System Controller Control system has access to set-up and module status with BITE (Built-In Test Equipment) Optical Input Sensitivity better than –30dBm Max. input power -3dBm Optical wavelengths 1200-1620nm Transmission circuit fibre Multi Mode 50/125um, Single Mode 9/125um compatible Connector SC/UPC, Return Loss better than 40dB


SIGNAL TRANSPORT

Optical Converters

2.5

T140-EO-13T/15T

T140-OE

G.703 Electrical to Optical Converter

G.703 Optical to Electrical Converter

Optical Transmitter

g.70 input 1 0-155Mbps

Optical Transmitter optical output

equaliser

g.70 input 1 0-155Mbps

distribution amplifier

optical output

equaliser

distribution amplifier

2 x g.70 output

2 x g.70 output

• STM1/OC3 and E4 transport • 1310, 1550nm and CWDM versions

G.703 Input Data rate NRZ 140Mbps – 155Mbps Standard ITU-T G.703 Equalisation Auto. up to 35dB Impedance 75 ohm Return loss >15dB @270MHz Peak to peak signal level 1V ± 0.1 V Connector BNC GEneral Power Control

+5V DC / 1.6W Control system for access to set-up and module status with BITE (Built-In Test Equipment)

G.703 Output Number of outputs 2 Connector BNC Impedance 75 ohm Return loss > 15dB Peak to peak signal level 1V ± 0.1 V Rise/fall time < 2ns Standard ITU-T G.703 Optical Output Transmission circuit fibre Single Mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power –7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 137 Optical power for CWDM modules 0dBm Jitter (UI=unit interval) 0.135 UI max. Connector return loss Better than 40dB typ. Maximum reflected power 4% Connector SC/UPC

• Multi mode and single mode • STM1/OC3 and E4 transport

Optical Input Data rate optical Sensitivity Optical wavelengths

140Mbps–155Mbps better than –28dBm typ. 2nd & 3rd opt. windows, 1200-1620nm Transmission Circuit Fibre Multi Mode 50/125um, Single Mode 9/125um compatible Return loss Better than 40dB w/Single Mode fibre Detector overload threshold min. –6dBm, typ. –3dBm Connector SC/UPC

GEneral Power Control

+ 5V DC / 1.7W Control system for access to set-up and module status with BITE (Built-In Test Equipment)

G.703 Output Number of outputs 2 Connector BNC Impedance 75 ohm Return loss > 15dB Peak to peak signal level 1V ± 0,1V Rise/fall time < 2ns Standard ITU-T G.703

network-electronics.com

| 129


SIGNAL TRANSPORT

2.5 Time Division Multiplexers SDI-TD-MUX-4

SDI-TD-DMUX-4

SDI Time Division Multiplexer

SDI Time Division De-multiplexer

Equaliser SDI/ASI 270Mbps

Reclocker Equaliser

SDI/ASI 270Mbps

4x4 switch

Equaliser

SDI/ASI 270Mbps

Reclocker

SDI/ASI 270Mbps

Reclocker

SDI/ASI 270Mbps

Reclocker

SDI/ASI 270Mbps

SMPTE 346M-2000

Optical Receiver

Optical Transmitter Optical Output

Reclocker

SDI/ASI 270Mbps

Reclocker TDM-DMUX

TDM-MUX

SMPTE 346M-2000

1.485 Gbps HD-SDI outputs

1.485 Gbps Optical Input

2x1 Changeover

1.485 Gbps Electrical Input

1.485 Gbps HD-SDI input

4x4 switch

Electrical Output

Reclocker Equaliser

SDI/ASI 270Mbps

EDH Handling

Reclocker

EDH Handling

Microcontroller

Remote Control

• 4 -Channel SDI/SDTI/DVB-ASI time division multiplexer • Complies with SMPTE 346M-2000 standard for TDM of video, audio, data over HD • Uninterrupted signal transport by loss of any input feed at transmitter (MUX) • High performance optics for short and long haul applications with CWDM laser option Electrical input Number of inputs 4 independent SD-SDI, DVB-ASI or SDTI Data rate 270 Mbps Equalisation Automatic up to 300m Impedance 75 ohm Return loss >15dB @ 270MHz Connector BNC Optical output Output signal

HD-SDI with TDM payload acc. to SMPTE 346M-2000 Transmission circuit fibre Single Mode Light source F-P / DFB laser Optical power –7.5dBM @ 1310nm (F-P laser), 0 dBm (DFB laser) Optical centre wavelength 1310nm, 1550nm, CWDM acc. to ITU-T G.694.2 Max. wavelength drift ±20nm (F-P lasers), ±6nm (DFB lasers) Jitter (UI = Unit Interval) Max. 0.2UI @ 1485Mbps Connector return loss better than 40dB w/ SM fibre Connector SC/UPC

Electrical output Output signal

HD-SDI with TDM payload acc. to SMPTE 346M-2000 Data rate 1485 Mbps Impedance 75 ohm Return loss >15dB @ 1485MHz Jitter (UI = Unit Interval) Max. 0.2UI Peak to peak signal level 0.8V ±0.1V Signal polarity Non-inverting Connector BNC

Electrical Temperature range 0 to +45 °C Power consumption 4.5W Control RS-422, GYDA enabled, SNMP Standards Supported standards for electrical and optical ports: SMPTE: SMPTE 346M-2000, SMPTE 292M, SMPTE 259M, SMPTE 305.2M, SMPTE 297M, SMPTE RP165 DVB-ASI: EN50083-9

130 | network-electronics.com

Microcontroller

• 4 -Channel SDI/SDTI/DVB-ASI time division demultiplexer • Transparent to AES audio or data signals in the vertical ancillary data space • Built-in routing switcher provides channel swapping capability • GYDA enabled for remote control, Optical input Input signal

HD-SDI with TDM payload according to SMPTE 346M-2000 Sensitivity Better than -25dBm Detector overload threshold Min. -6dBm Detector damage threshold > +1dBm Optical wavelength 2nd and 3rd optical window, 1200–1620nm Transmission circuit fibre Single Mode Connector return loss better than 40dB w/ SM fibre Connector SC/UPC Electrical input Output signal

HD-SDI with TDM payload according to SMPTE 346M-2000 Data rate 1485 Mbps Equalisation Automatic up to 100m Impedance 75 ohm Return loss >15dB @ 270MHz Signal level Nom. 800mV Connector BNC Electrical output Number of outputs 4 independent SD-SDI, DVB-ASI or SDTI Data rate 270 Mbps Impedance 75 ohm Return loss >15dB @ 270MHz Jitter (UI = Unit Interval) Max. 0.2UI Peak to peak signal level 0.8V ±0.1V Signal polarity Non-inverting Connector BNC Electrical Temperature range 0 to +45 °C Power consumption 4.5W Max. Control RS-422, GYDA enabled, SNMP Standards Supported standards for electrical and optical ports: SMPTE SMPTE 346M-2000, SMPTE 292M, SMPTE 259M, SMPTE 305.2M, SMPTE 297M, SMPTE RP165 DVB-ASI EN50083-9

Remote Control


SIGNAL TRANSPORT

RF over Fibre Modules

2.5

LB-EO

LB-OE

L-band Electrical to Optical Converter

L-band Optical to Electrical Converter

step attenuator

Optical Transmitter Optical Output

L-band

Optical Input 950-2150 MHz

Optical Receiver

Electrical Output 950-2150MHz LNB control

Monitor Output LNB power supply

LNB control

Microcontroller

Remote Control

• Frequency range 950–2150 MHz • Remotely controlled digital gain and manual gain control with GYDA system controller • Protocol transparent broadband transmission • F-type coaxial connector • High performance optics for short and long haul applications with CWDM laser option • Optical link budget up to 25dB • GYDA enabled for remote control, status monitoring, error reporting and SNMP support

RF Characteristics Frequency band width Return loss Gain flatness

950-2150 MHz >10dB ±1.5dB over entire band ±0.25dB at any 36 MHz Maximum usable input signal < -5dBm Maximum input signal without damage >+10dBm Inter modulation products < -55dBc with two carriers –20dBm input signal, 5dB fibre loss Link gain 40dB 1dB compression (output) 0dBm Noise figure <10dB Carrier to noise ratio (CNR) >45dB with maximum input power @ 36MHz Spurious free dynamic range (SFDR) – input signal level -25dBm >109dBc/Hz

Optical Characteristics Wavelength 1310nm ± 10nm, 10 CWDM channels ± 2nm 1290, 1310, 1330, 1350, 1470, 1490, 1510, 1530, 1550 and 1570nm Power output +3dBm Other general standards for compliance with all products: EMC EN 55103-1, 55103-2 Environmental RoHS, WEEE Power consumption Maximum power consumption <3W (+5V), <1.5W (-15V), <1.5W (+15V)

Monitor Output

step attenuator

Microcontroller

Remote Control

• Frequency range 950–2150 MHz • Remotely controlled digital gain and manual gain control with GYDA system controller • Protocol transparent broadband transmission • F-type coaxial connector • High performance optics for short and long haul applications with CWDM laser option • Optical link budget up to 25dB • GYDA enabled for remote control, status monitoring, error reporting and SNMP support

RF Characteristics Frequency band width 950-2150 MHz Return loss >10dB Gain flatness ±1.5dB entire band ±0.25dB at any 36 MHz Maximum Output signal > -5dBm Inter modulation products < -55dBc with two carriers –20dBm input signal, 5dB fibre loss Link gain 40dB 1dB compression (output) 0dBm NF (5dB optical loss) <15dB CNR >45dB with maximum input power @ 36MHz SFDR (typically -25dBm) >109dBc/Hz Optical Characteristics Wavelength 1270-1610nm Maximum input power -6dBm Other general standards for compliance with all products: EMC EN 55103-1, 55103-2 Environmental RoHS, WEEE LNB control 22kHz compatible Power consumption Maximum power consumption <3W (+5V), <1.5W (-15V), <1.5W (+15V) Environmental conditions Operation temperature range 0°C – 45°C Operation without damage temperature range –10°C – 55°C

Environmental conditions: Operation temp. range 0°C – 45°C Operation without damage temperature range –10°C – 55°C

network-electronics.com

| 131


SIGNAL TRANSPORT

2.5 Datacom Interfaces ETH100

ETH1000

Fast Ethernet Converter

Gigabit Ethernet Media Converter electrical output to dWdM Module

2X 10/100 Mbps twisted Pair ethernet

Ethernet Switch w/1mb packet buffer

optical transmitter optical output

optical transmitter optical output 10/100/1000 Mbps twisted Pair ethernet

physical interface ethernet

optical receiver optical input

optical receiver optical input

Microcontroller

• 1310, 1550nm and CWDM lasers • Electrical output for use in DWDM systems • Two electrical inputs • Onboard switch • Sensitivity better than -36dBm

Optical input Sensitivity Better than –36dBm Optical wavelength 1200–1620nm Transmission circuit fibre Multi mode 50/125um, Single mode 9/125um compatible Connector return loss Better than 40dB Detector damage threshold >+1dBm Max input power 0dBm Connector SC/UPC Optical output Transmission circuit fibre Single Mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 137 Optical power for CWDM modules 0dBm Connector return loss better than 40dB typ. Max.reflected power 4% Connector SC/UPC Ethernet 2 x 10BaseT/100BaseTx on RJ-45 connectors, compliant with IEEE 802.3 and IEEE 802.3u, speed auto sensing, auto MDI/MDI-X General Power Control

+5V DC/4W and –15VDC/0.1W Control system for access to setup and module status with BITE (Built-In Test Equipment)

132 | network-electronics.com

remote Control

• 10BaseT/100BaseTx/1000BaseT auto sensing, compliant with IEEE 802.3 and IEEE 802.3u, auto MDI/MDI-X • 1310nm, 1550nm, CWDM lasers • Receiver sensitivity better than -25dBm • Card edge LEDs and GYDA enabled • Low power (2W)

Optical Input Sensitivity Better than –25dBm Optical wavelength 1200–1620nm Transmission circuit fibre Single mode 9/125um Connector return loss Better than 40dB Detector damage threshold >+1dBm Max input power 0dBm Connector SC/UPC optical Output Transmission circuit fibre Single Mode 9/125um Light source F-P/DFB Laser Optical wavelength: ETH1000-13T, -7.5dBm 1310 ±40nm ETH1000-13T, 0dBm 1310 ±40nm ETH1000-15T, 0dBm 1550 ±40nm ETH1000-C1470, 0dBm 1470 ±6nm ETH1000-C1490, 0dBm 1490 ±6nm ETH1000-C1510, 0dBm 1510 ±6nm ETH1000-C1530, 0dBm 1530 ±6nm ETH1000-C1550, 0dBm 1550 ±6nm ETH1000-C1570, 0dBm 1570 ±6nm ETH1000-C1590, 0dBm 1590 ±6nm ETH1000-C1610, 0dBm 1610 ±6nm ethernet 10BaseT/100BaseTx/1000BaseT on RJ-45 connectors, compliant with IEEE 802.3 and IEEE 802.3u, speed auto sensing, auto MDI/MDI-X General Power Control

+5V DC / 2W Control system for access to setup and module status with BITE (Built-In Test Equipment)


SIGNAL TRANSPORT

RS-422 and GPI D-422

D-422-MG

RS-422 Data Transceiver

RS-422 Data Transceiver with GPI Multiplexer

optical transmitter rs 22

2.5

electrical output to optional dWdM Module optical output

COdEC

rs 22(1) rs 22(8)

optical transmitter

gPo(1)

optical input

optical output

multiplexer gPo(16) gPi(1)

optical receiver

gPi(16)

electrical output to optional dWdM Module

optical receiver optical input

Occupies two slots • Bi-directional RS-422 to optical converter • Transports from DC up to 115.2kbps • Low latency • 1310nm, 1550nm and CWDM • Electrical output for use in DWDM system

Data inputs and outputs Signal format RS-422 Connector RJ-45 Bit Rate DC up to 115.2kbps Latency 400ns maximum single ­direction latency including 1m of fibre. ­Additional latency 5us/km of fibre. General Power +5V DC /2.4W Control RS-422 with protocol for use with GYDA System Controller. Control system has accessto set-up and ­module status with BITE (Built-In Test Equipment) Optical Input Sensitivity better than –30dBm Max. input power –3dBm Optical wavelengths 1200-1620nm Transmission circuit fibre Multi Mode 50/125um, Single Mode 9/125um compatible Connector SC/UPC, Return Loss better than 40dB Optical Output Transmission circuit fibre Single Mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 137 Optical power for CWDM modules 0dBm Jitter (UI=unit interval) 0.135 UI max. Connector return loss Better than 40dB typ. Maximum reflected power 4% Connector SC/UPC

• 8 x RS-422 bi-directional data streams • 16 x GPI in each direction • Very low latency • CWDM laser type is optional • Electrical output for use in DWDM system

Data inputs and outputs Signal format 8 x RS-422 Connector 4 x RJ-45 Signal format 16 x GPI / 16 x GPO Connector DB 25 Bit Rate DC up to 115.2kbps Latency 400ns maximum single ­direction latency including 1m of fibre. ­Additional latency 5us/km of fibre GENeRAL Voltage +5V DC Control RS-422 with protocol for use with GYDA System Controller. Control system has access to set-up and module status with BITE (Built-In Test Equipment) Optical Input Sensitivity Better than –30dBm Max. input power -3dBm Optical wavelengths 1200-1620nm Transmission circuit fibre Multi Mode 50/125um, Single Mode 9/125um compatible Connector SC/UPC, Return Loss better than 40dB Optical Output Transmission circuit fibre Single Mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 137 Optical power for CWDM modules 0dBm Jitter (UI=unit interval) 0.135 UI max. Connector return loss Better than 40dB typ. Maximum reflected power 4% Connector SC/UPC

network-electronics.com

| 133


SIGNAL TRANSPORT

2.5 Automatic Protection Switching and Optical Distribution WOC-2-x-x

Wideband Optical Coupler

Combiner / Splitter

Common optical Fiber

X% of λ

optical Fiber 1

(100 – X)% of λ

optical Fiber 2

• Passive optical splitter module • 50/50, 90/10 or 95/05 split rate • For multiple distribution and linear tapped fibre busses • Directivity better than 55dB

Optical Optical wavelength

The drawing shows how the optical signal from a 0dBm SDI-EO module can be distributed to many end users through a tapped linear bus architecture using different types of wideband optical couplers. The drawing does not include fibre attenuation, which must be added. In order to optimise the transmission budgets a combination of different split ratios should be used. If the distances from the wideband optical coupler to the receivers are approximately the same, a split ratio of 50-50 is preferred. If the distance to one of the receiver is much shorter than the other, either a split ratio of 90-10 or 95-05 can be used dependent on the available optical budget. As a rule of thumb, a margin of 3dB in the budget is recommended in case of future degradation of the optical link. Regeneration of the signal may be done by utilising an O/E and E/O (O-E-O) conversion, hence allowing for further drop points and/or longer distances. See also p. 90 for 3R Regeneration.

2nd and 3rd opt. window (1310nm and 1550nm) Optical bandpass 1270-1350nm and 1510-1590nm Connector return loss >40dB w/SM fibre Directivity >55dB Transmission circuit fibre Single mode 9/125 um Connector SC/UPC Split ratios and insertion loss ratios incl. connector losses: WOC-2-50-50 50%/50% 4.3dB/4.3dB WOC-2-90-10 90%/10% 1.4dB/11.7dB WOC-2-95-05 95%/5% 1.1dB/15.3dB

GEneral Power None Control None

WOC-2-95-05

0dBm W O C

SdI-EO

WOC-2-90-10

-1.1dBm

0dBm W O C

SdI-EO

95 . . 5

-2.2dBm W O C

SdI-EO

0dBm

W O C

95 . . 5

W O C

95 . . 5

-6.6dBm W O C

95 . . 5

-17.5dBm

-18.6dBm

-19.7dBm

-20.8dBm

-1. dBm

-2.8dBm

- .2dBm

-5.6dBm

-7.0dBm

-8. dBm

90 . . 10

50 . . 50

- . dBm

134 | network-electronics.com

95 . . 5

5.5dBm

-16. dBm

W O C

90 . . 10

W O C

-1 .1dBm

- . dBm W O C

W O C

- . dBm

-15. dBm

-11.7dBm

WOC-2-50-50

95 . . 5

- . dBm

50 . . 50

-8.6dBm

W O C

-1 .5dBm

-8.6dBm W O C

90 . . 10

50 . . 50

-12.9dBm

W O C

-15.9dBm

-12.9dBm W O C

90 . . 10

50 . . 50

-17.2dBm

W O C

-17. dBm

-17.2dBm W O C

90 . . 10

-18.7dBm

-21.5dBm W O C

50 . . 50

-21.5dBm

90 . . 10

-25.8dBm W O C

50 . . 50

-25.8dBm


SIGNAL TRANSPORT

Optical switching and Wavelength Division Multiplexing

2.5

WOS-2x2

WDM-2

2x2 Wideband Optical Switch

Wavelength Division Multiplexer

optical Fiber 1

optical Fiber 2

Power

Power SpdT

Power

Power

Common optical Fiber 1

1 1 10nm + 1550nm

1+

2

2

Common optical Fiber 2

• Optical redundancy switch • Contolled via GPI alarm input, RS-422 or GYDA Control System • Tally output • Latching and non-latching version available

1550nm

• Two channels per fibre • Bi-directional traffic on the same fibre • Can be used as multiplexer and de-multiplexer

Optical Optical wavelength 1290-1620nm Insertion loss 1.4dBtyp, max 2.1dB Connector return loss >40dB w/SM fibre Cross talk <-80dB Repeatability +/- 0.01dB Durability 10 000 000 cycles Switching time 50ms typ. Transmission circuit fibre Single mode 9/125 um Connector SC/UPC

Optical Optical wavelength

GENERAL Power Control

GEneral Power None Control None

2nd and 3rd opt. window (1310nm or 1550nm) Optical bandpass 1280-1335nm and 1525-1575nm Insertion loss < 2dB Isolation > 17dB Directivity > 50dB Transmission circuit fibre Single mode 9/125 um Connector Return loss >40dB w/SM fibre Connector SC/UPC

+5V DC/ 1W Control system for access to setup and module status with BITE (Built-In Test Equipment)

2x2 Switch Main Position

1 10nm

Wdm

Example

2x2 Switch standby Position

input 1

output 1

input 1

output 1

input 2

output 2

input 2

output 2

Town A

Town B

Frame: Fr-2ru-10-2

Frame: Fr-2ru-10-2

Modules: 1 x WdM-2 1 x sdi-eo-1 t odBm 1 x sdi-eo-15t odBm

Modules: 1 x WdM-2 2 x sdi-oe-s or 2 x sdi-oe-l

network-electronics.com

| 135


SIGNAL TRANSPORT

2.5 Optical Multiplexing

CWDM systems can be built with 8 channels pr frame (up to 16 ch.), or with 16 channels in one frame (requires dual optical converters for SD/HD). Systems incorporating DWDM are based on the 4+1 architecture that has 4 channels per frame + 1 upgrade port, thereby enabling easy and cost efficient upgrade of capacity on the fibre as the demand grows. Optical multiplexers are available for systems with a wavelength count higher than 16.

Comparison of WDM technologies Flashlink DWDM/CWDM DWDM (100GHz) CWDM Power consumption per Tx card (SDI)

5W typically

1.6W

Laser wavelength variation (0-40°C)

±0.16nm

±6.5nm

Channel spacing

0.8nm

20nm

Max number of channels today 40

Channels per frame 4+1 upgrade port 8 or 16 Optical amplification well proven for long haul applications

Yes No

WDM Channel Overview

o-band 1250

1 00

To ensure maximum interoperability, the wavelengths used in both the CWDM as well as the DWDM systems are selected according to the standards ITU-T G.694.1 for DWDM and ITU-T G.694.2 for CWDM.

e-band 1 50

1 00

s-band

1 50 1500 Wavelength (nm)

1 10

Since some of the CWDM wavelengths overlap the DWDM wavelengths, systems using DWDM technology over CWDM infrastructure can be built. Optical multiplexing is format and protocol independent, so a mixture of different signals on the different wavelengths is straightforward.

16

Fiber attenuation

By using the all-optical Wavelength Division Multiplexing (WDM) technique, simultaneous transport of multiple signals on the same fibre is possible. A standard 2-channel WDM solution enables transmission of two independent signals on the same fibre. Both uni-directional and bi-directional configurations are possible, as the direction of any channel can be chosen to suit the transport needs.

1270

C-band

l-band

u-band

1550

1600

1650

2 ch WdM

1550

1 70

1550

16 ch CWdM

1610

C-band

15 0

1565

2 ch dWdM

C-band

15 0

136 | network-electronics.com

1565

0 ch dWdM


SIGNAL TRANSPORT

Optical Multiplexing

Ch.2

independent channels

Ch.

Ch.2 Ch.

optical fibre

Ch.

upgrade port

upgrade port

Ch.

Ch.1

The DWDM system is based on 4+1 architecture consisting of 4 channels per frame + 1 upgrade port per frame, hence the name 4+1 architecture. This architecture enables easy addition of more services on the same fibre by adding more wavelengths without interruption of existing services on the optical fibre. The inherent modularity and scalability of the 4+1 architecture as opposed to a fixed 4 or 8-channel system, creates a system that can be scaled to fit the demand for bandwidth for many years to come. The upgrade port adds additional flexibility in design of optical links. Smart and cost-effective networks can be built by utilising the upgrade port to e.g. bypass traffic through a node and onto the final destination without the need to demultiplex and multiplex the signals at each node.

flashlink CWDM 1–8 and 9–16 Wavelength Availability Chart acc. to ITU-T G.694.2

Wavelength [nm] sub-rack 1 1470 1490 1510 1530 1550 1570 1590 1610

Wavelength [nm] sub-rack 2 1270 1290 1310 1330 1350 1370 1390 1410

All those wavelengths are available in one frame in the CWDM 1-16 system

Frequency

[THz]

196.00 195.90 195.80 195.70 195.60 195.50 195.40 195.30 195.20 195.10 195.00 194.90 194.80 194.70 194.60 194.50 194.40 194.30 194.20 194.10 194.00 193.90 193.80 193.70 193.60 193.50 193.40 193.30 193.20 193.10 193.00 192.90 192.80 192.70 192.60 192.50 192.40 192.30 192.20 192.10 192.00

Wavelength flashlink sub-rack [nm]

position

1529.55 1530.33 SR-3 1531.12 1531.90 SR-4 1532.68 1533.47 SR-3 1534.25 1535.04 SR-4 1535.82 1536.61 SR-3 1537.40 1538.19 SR-4 1538.98 1539.77 SR-3 1540.56 1541.35 SR-4 1542.14 1542.94 1543.73 1544.53 1545.32 1546.12 1546.92 1547.72 1548.51 1549.32 SR-1 1550.12 1550.92 SR-2 1551.72 1552.52 SR-1 1553.33 1554.13 SR-2 1554.94 1555.75 SR-1 1556.55 1557.36 SR-2 1558.17 1558.98 SR-1 1559.79 1560.61 SR-2 1561.41

Bl ue waveleng ths

Ch.1

flashlink DWDM Wavelength Availability Chart acc. to ITU-T G.694.1

RED wavelengths

Introduction – Multichannel WDM

2.5

network-electronics.com

| 137


SIGNAL TRANSPORT

2.5 Optical Multiplexing FR-2RU-CWDM1-8 and FR-2RU-CWDM9-16

CWDM System 16 independent channels

Ch.9 . . .

CWdm channel 9-16

Ch.16 Ch.1 . . .

optical fibre

Ch.9 . . .

CWdm channel 9-16

CWdm channel 1-8

Ch.16

CWdm channel 1-8

Ch.8

Ch.1 . . . Ch.8

CWdm 1270

Specifications for each frame Dimensions 483 x 88 x 178 mm (19â€?, 2RU) Card slots 9 (1 reserved) Power supply slots 2 AC power AC power supply module 100-260 VAC (PWR-AC15/15/5/5V) DC power (optional) DC power supply module 36-72 VDC (PWR-DC15/15/5V) Redundant power (optional) Internal voltages +5V, + 15 V, -15 V Operation temperature 0-40°C Light source DFB Laser Wavelengths See page 137 Transmission circuit fibre Single mode 9/125 um Optical power per ch. 0dBm typ. Connector Return loss Better than 30dB typ. Max. reflected power 4% Connector common port SC/UPC acc. to SMPTE-297M Connector common port (optional) FC/PC OPTICAL FILTERING, channels 1-8 and 9-16 Insertion loss any ch. (1-8) 5dB max total for both ends Insertion loss any ch. (9-16) 7dB max total for both ends Insertion loss per upgrade port 2.0dB max Tx-Tx directivity -55dB Isolation adjacent ch. -25dB Isolation any other ch. -35dB

138 | network-electronics.com

1 70

1550

1610

This CWDM system is based on frames containing 8 channels each. 1 upgrade port for easy addition of more channels at a later stage. The wavelengths of FR-2RU-CWDM 1-8 and 9-16 are fixed, and are chosen according to the ITU-T G.694.2 standard in order to ensure maximum interoperability. The optical filtering is mounted permanently within the frames. The wavelengths of the signal cards must correspond to the wavelengths of the optical filters, whereas the signal formats running on those wavelengths can be chosen to suit the signal transport needs. A 16-channel CWDM system consists of two frames, one frame at each end of the fibre. Both FR-2RU-CWDM 1-8 and 9-16 are 2RU frames with a single AC power supply, a dedicated slot for redundant power supply (AC or DC), RS-422 control, as well as the optical filtering needed, the different signal cards (transmitters and receivers) for each of the 16 wavelengths must be ordered separately.


SIGNAL TRANSPORT

Optical Multiplexing

2.5

FR-2RU-CWDM1-16

16-Channel CWDM system

16 independent channels

Ch.1 . . .

CWdm channel 1-16

Ch.16

optical fibre

Ch.1 . . .

CWdm channel 1-16

Ch.16

CWdm 1270

1 70

1550

1610

Specifications Dimensions 483 x 88 x 178 mm (19”, 2RU) Card slots 8 (2 reserved) Power supply slots 2 AC power AC power supply module 100-260 VAC (PWR-AC15/15/5/5V) DC power (optional) DC power supply module 36-72 VDC (PWR-DC15/15/5V) Redundant power (optional) Internal voltages +5V, + 15 V, -15 V Operation temperature 0-40°C Light source DFB Laser Wavelengths See page 137 Transmission circuit fibre Single mode 9/125 um Optical power per ch. 0dBm typ. Connector Return loss Better than 30dB typ. Max. reflected power 4% Connector common port SC/UPC acc. to SMPTE-297M Connector common port (optional) FC/PC OPTICAL FILTERING, channels 1-16 Insertion loss any ch. (1-8) 5dB max total for both ends Insertion loss any ch. (9-16) 7dB max total for both ends Insertion loss per upgrade port 2.0dB max Tx-Tx directivity -55dB Isolation adjacent ch. -25dB Isolation any other ch. -35dB

The industry’s most compact 16-Channel CWDM system Based on our new dual optical converters and our widely deployed ultra-compact 8-Channel CWDM filter (see previous page), we are now able to offer 16 independent SDI or HD-SDI channels multiplexed onto a single fibre strand in only 2RU. Following Network Electronics’ low power design strategy the system consumes only 30W and does not require fans. The FR-2RU-CWDM1-16 16-Channel CWDM system has the following major advantages: • 16-Channel SDI or HD-SDI with CWDM Multiplexer in 19” 2RU frame • Dual redundant AC/AC, AC/DC, or DC/DC power supplies with dual mains • Ultra-low power design, no fans • Front-loaded hot-swap of optical transmitter and receiver cards

network-electronics.com

| 139


SIGNAL TRANSPORT

2.5 Optical Multiplexing FR-2RU-DWDM-1, FR-2RU-DWDM-2 FR-2RU-DWDM-3 and FR-2RU-DWDM-4

DWDM System

Ch.16 Ch.15 Ch.1

dWdm channels 13-16

dWdm channels 13-16 16 independent channels

Ch.1 Ch.12

dWdm channels 9-12

Ch.11 Ch.10

optical fibre

Ch.11 Ch.10 Ch. 9

Ch.8

Ch.2

dWdm channels 1-4

Ch. Ch.

Ch.7

dWdm channels 1-4

Ch.6 Ch.5

Ch.5

Ch.8

Ch.1 Ch.12

Ch.1

Ch.7

Ch.15 Ch.1

dWdm channels 9-12

Ch. 9

Ch.6

Ch.16

Ch. dWdm channels 5-8

dWdm channels 5-8

Ch. Ch.2 Ch.1

C-band

15 0

1565

0 ch dWdM

Specifications for each frame Dimensions 483 x 88 x 178 mm (19â€?, 2RU) Card slots 5 (5 reserved) Power supply slots 2 AC power AC power supply module 100-260 VAC (PWR-AC15/15/5/5V) DC power (optional) DC power supply module 36-72 VDC (PWR-DC15/15/5V) Redundant power (optional) Internal voltages +5V, + 15 V, -15 V Operation temperature 0-40°C Light source DFB Laser Wavelengths See page 137 Transmission circuit fibre Single mode 9/125 um Optical power per channel 0dBm typ. Connector Return loss Better than 30dB typ. Maximum reflected power 4% Connector common port SC/UPC acc. to SMPTE-297M Connector common port (optional) FC/PC OPTICAL FILTERING Insertion loss any channel (1-4) 6dB max total for both ends Insertion loss any channel (1-8) 8dB max total for both ends Insertion loss any channel (1-12) 10dB max total for both ends Insertion loss any channel (1-16) 10dB max total for both ends Insertion loss per upgrade port 2.0dB max Tx-Tx directivity -55dB Isolation adjacent channel -25dB Isolation any other channel -35dB

140 | network-electronics.com

The flashlink DWDM system is based on frames containing 4 channels each +1 upgrade port for easy addition of more channels at a later stage. The wavelengths of FR-2RU-DWDM are fixed, and are chosen according to the ITU-T G.694.1 standard in order to ensure maximum interoperability. The optical filtering is mounted permanently within the frames. The wavelengths of the signal cards must correspond to the wavelengths of the optical filters, whereas the signal formats running on those wavelengths can be chosen to suit the signal transport needs. A 16-channel DWDM system consists of eight frames, four frames at each end of the fibre. FR-2RU-DWDM is the 2RU frame with a single AC power supply, a dedicated slot for redundant power supply (AC or DC), RS-422 control, as well as the optical filtering needed, the different signal cards (transmitters and receivers) for each of the wavelengths must be ordered separately.


SIGNAL TRANSPORT

Optical Multiplexing

2.5

FR-2RU-DWDM-MUX32-C / FR-2RU-DWDM-MUX40-C

32 (40) channel DWDM System

e/o

digital signal in

e/o e/o e/o e/o e/o e/o

Ch.1 Ch.2 Ch. Ch.

Ch.1 Ch.2 Ch. Ch.

Ch.5 Ch.6 Ch.7 Ch.8

Ch.5 Ch.6 Ch.7 Ch.8

Ch.9 Ch.10 Ch.11 Ch.12

Ch.9 Ch.10 Ch.11 Ch.12

Ch.1 Ch.1 Ch.15 Ch.16 Ch.17 Ch.18 Ch.19 Ch.20

flashlink dWdm 32 ch. mUx frame

2 independent channels optical fibre

flashlink dWdm 32 ch. dmUx frame

Ch.1 Ch.1 Ch.15 Ch.16 Ch.17 Ch.18 Ch.19 Ch.20

Ch.21 Ch.22 Ch.2 Ch.2

Ch.21 Ch.22 Ch.2 Ch.2

Ch.25 Ch.26 Ch.27 Ch.28

Ch.25 Ch.26 Ch.27 Ch.28

Ch.29 Ch. 0 Ch. 1 Ch. 2

Ch.29 Ch. 0 Ch. 1 Ch. 2

o/e o/e o/e o/e o/e

digital signal out

e/o

o/e o/e o/e

C-band

15 0

SpecificationS Dimensions 483x88x178mm (19�, 2RU) Wavelengths See page 85 Channel spacing 100GHz within the C-band Insertion loss paired mux/demux 11dB max Pair uniformity on paired shipped together 2.0dB typ Adjacent ch. isolation 28dB typ, 25dB min Non-adjacent ch. isolation 4 0dB min Directivity 45dB min Connector SC/UPC Connector return loss Better than 40dB Polarisation Dependent Loss 0.1dB typ, 0.2dB max Transmission circuit fibre Single Mode 9/125 um

1565

0 ch dWdM

The flagship of the optical transport platform is the 32-channel DWDM-system, allowing for up to 32 signals on a single strand of optical fibre. Based on the standardised ITU-T G.694.1 channel spacing grid of 100GHz within the C-band, the 32-channel DWDM system has the same flexibility in signal formats and bit-rates as the 16-channel system using a channel spacing grid of 200GHz. The optical filtering is placed in a separate 2RUframe doing all the filtering needed to multiplex or demultiplex the channels involved. The filtering is always sold as a corresponding pair of two frames, one for each end of the fibre. This is due to the fact that the filters are designed as a pair in order to optimise the optical characteristics of the filters and minimise insertion loss. The direction of any channel can be reversed so the system allows for maximum flexibility while designing your optical networks. Please contact our technical system sales team to design the best solution for your needs. A 40-channel DWDM can be delivered on request.

network-electronics.com

| 141


SIGNAL TRANSPORT

2.5 Optical Multiplexing SDI-TR-D15xx.xx, MR-TR-D15xx.xx and MR-TR-2.5G

3R Regeneration – Reamplification, Reshaping and Reclocking

For long haul application the 3R-2RU-DWDM can provide 3R regeneration of optical signals, thereby working as a repeater station doing the optical to electrical to optical conversion of multiple signals. The signals supported will depend on the module doing the electrical signal processing. The compact 2RU chassis provides 3R regeneration for the same set of 4 DWDM channels as the corresponding frame of the FR-2RU-DWDM series, thereby reducing the amount of space from 4RU to 2RU at the regeneration points. This repeater frame is particularly useful for transport of bi-directional signals as well as being an alternative to Erbium Doped Fibre Amplifiers (EDFAs) for low channelcounts. It is available for DWDM channels 1-16. An EDFA provides optical reamplification (1R regeneration) for uni-directional signals, for bidirectional signals one (or more depending on the distance) EDFA is needed per direction. The 2RU frame consist of the following parts: 1 4-channel optical demultiplexer 1-4 MR-TR-D15xx.xx, MR-TR-2.5G or SDI-TR-D15xx.xx configured 1 4-channel optical multiplexer

142 | network-electronics.com

Ch.1 dWdm dmUx

Ch.2 Ch. Ch.

Fr-2ru-dWdM-1

70km

r-2ru-dWdM-1

3R 3R 3R 3R

65km

Ch.1 Ch.2 Ch.

dWdm mUx

Ch.

r-2ru-dWdM-1

80km

Fr-2ru-dWdM-1


SIGNAL TRANSPORT

IP Gateways

2.5 SDI-IP-GTW

SDI TO IP GATEWAY The world market is going through a major change the way in which video content is moved around. The new way is by using the Internet Protocol (IP) over Telco networks, a technology currently deployed on the Internet and in corporate networks. The scalable and cost-effective IP networks offer an inherent flexibility of bandwidth: 10Mbit/s, 100Mbit/s, 1Gbit/s and 10 Gbit/s. This technology enables new applications and opportunities, for instance low delay uncompressed video on SDI using 270Mbit/s, MPEG-2 bandwidths of 1-50 Mbit/s, MPEG-4 part10 (H.264/AVC)

SDI to IP Gateway The award winning IPTV gateway (SDI-IP-GTW) solution allows real time transport of uncompressed SDI digital video via IP over Wide Area Networks (WAN) where access to dark fibre or wavelengths is limited. Like other products in the Flashlink family, the SDI-IP-GTW provides uncompromising video quality with no signal degradation. An advanced forward error correction mechanism in accordance with Pro-MPEG Code-of-Practice #4 guarantees high quality of service. Application Areas: • Professional broadcast contribution • Video backhaul solutions • Live event coverage Production Facility

IP Network

Live Sports

Network Operations Center

SDI IN

SDI OUT 1

SDI OUT 2

TEST

IN ACTIVE LED YELLOW : SDI IN LED GREEN : ACTIVE

• SDI over Gigabit Ethernet/IP • IP protocol in accordance with Pro-MPEG CoP4 • Various Forward Error Correction modes, high QoS • Built-in frame synchroniser with advanced jitter suppression • Transparent to embedded AES audio or other ancillary data • Configurable as transmitter or receiver • Separated management Ethernet port with in-band management option • User friendly WEB/XML based remote control • Easy integration to NMS systems with SNMP support Video Interfaces Input SDI (SMPTE259) /SDTI (SMPTE305) Output 2 x SDI (SMPTE259) Connector Female BNC Bitrate 270Mbps SDI Clock Options Locked to Input Signal Genlock to external SDI input Network Interfaces Type 100/1000Base-T Ethernet Protocols IEEE802.3 Ethernet RTP, ARP, IPv4, IGMPv2/3, TCP/UDP Connector RJ45 SFP Module Features Video Encapsulation Pro-MPEG Forum COP-4 Forward Error Correction: Pro-MPEG Forum COP-4 Control and Management Type 10/100 Base-T Features Element control through HTTP/WEB. SNMP traps for integration with Network Management System (NMS) Protocol HTTP, XML, SNMP v2 Connector RJ45 Alarm Relay 9 pin D-SUB Maintenance Port RS232 9 pin D-SUB Physical and Power Input Voltage 100-240V AC +/- 10% Input Voltage Option 48V DC Dimensions 1RU, ½-width 19’’ (WxDxH) 210x300x44.5mm (Two units in 19’’ 1RU rack space) Installation 19’’ rack mounting kit supplied Environmental Conditions Operating Temperature 0°C - +50°C Storage Temperature -20°C - +70°C Relative Humidity 5% to 95% (non condensing) Compliance CE

CE marked in accordance with 93/68/EEC (22/07/03) Directive UL Designed for UL approval Safety IEC60950 and EN60950 EMC EN55022, EN55024,EN6100-3-2

network-electronics.com

| 143


SIGNAL TRANSPORT

2.5 Accessories

Single Mode Patch Cords Order no. Description: SC/SPC-1 SC Patch Cord 1m SC/SPC-2 SC Patch Cord 2m SC/SPC-3 SC Patch Cord 3m SC/UPC-FC/PC-1 SC-FC Patch Cord 1m

SC/UPC-SC/APC SC/APC Patch Cord (8O cut angle) 1m Other lengths or multi mode patch cords on request

PIGTAILS Order no.: SC/UPC Pigtail 1m SC/UPC Pigtail 2m SC/UPC Pigtail 3m

ATTENUATORS Order no.: SC-Attenuators 5dB SC-Attenuator 10dB

CleTop – Fibre Cleaning Order no. Description: CleTop For cleaning your fibre connections CleTop Tape Spare tape for CleTop

CAT5 – Cables Order no. Description: CAT-5/SerPort-1 m Cable connection Frame to PC

Other accessories Order no. Description FR-Fan-1RU Fan for ventilation, 1 RU DB25Pin ­Adaptor Small print-card with DB25 to screw-terminal 3m x XLRM-25pin Network DB25pin Audio Contact to 8 x XLRM (Male), 3 meter cable 3m x XLRM-15pin Network DB15pin Audio Contact to 4 x XLRM (Male), 3 meter cable DB15-DB25 Cable Interconnect cable ADC-AES to AV-MUX-xxxx DB25-DB15 Cable Interconnect cable AV-MUX-xxxx to ADC-AES

Power Supply AC / DC For flashlink Frame PWR-AC15/15/5/5V

Power supply with 2 x 15V and 2 x 5V, 60W, input 110-260VAC auto-sensing, for spare or redundant supply

3rd Party Interfaces

Multiple 3rd Party Interfaces may be used in conjunction with the flashlink optical product range. These interfaces further expand the variety of signal formats that can be transported on all our platforms: PtP, WDM, CWDM and DWDM

Manufacturer: Allied Telesyn

Order no. Description AT-RapierG6-A35LX/SC 6 port Gigabit Ethernet switch with 1000BaseLX uplink port for use with MR-TR. With wire speed Layer 2 switching and wirespeed Layer 3 IP routing on all ports. All 6 ports supports 10/100/1000 Mbit/s. 2RU AT-MC1005 Gigabit Ethernet Media Converter for 1000BaseT to 1000BaseLX conversion. Can be used with MR-TR to give electrical Gigabit Ethernet compatibility. (AT-MCR12, 12 slot Media Converter rackmount chassis also available).

Manufacturer: Pandatel

Order no. Description: FLT-EE/4SGB-E Fibreoptical Modem, 1310nm F-P laser, SC-PC, 34Mbps E3 FLT-EE/BSGB-E Fibreoptical Modem, 1550nm DFB laser, SCPC, 34Mbps E3 FLT-ET/4SGB-E Fibreoptical Modem, 1310nm F-P laser, SC-PC, 45Mbps T3/DS3 FLT-ET/BSGB-E Fibreoptical Modem, 1550nm DFB laser, SCPC, 45Mbps T3/DS3 EMUX-C/GR-E 16-ch. 2Mbps Multiplexer, 34Mbps electrical output, 2Mbps E1/T1. 1RU AM-F-E/4F Optical Interface for EMUX-C, 1310nm F-P laser, FC-PC AM-F-E/BS Optical Interface for EMUX-C, 1550nm DFB laser, SC-PC FME-ST-C/4FGR-E 4-ch. 2Mbps Multiplexer, 1310 laser, FC/PC, 2Mbps E1/T1 FME 6-ch. Multiplexer, X.21;V.35;V.24; T1; E1; HDSL (nx56/64kbps). 1RU

Manufacturer: Precidia

Order no. Description: Ether 422 Serial 422 to Ethernet converter, max 38400 bps Ether 232 Serial 232 to Ethernet converter, max 38400 bps Ether 485 Serial 485 to Ethernet converter, max 38400 bps

144 | network-electronics.com


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.