Network Electronics VPG - Catalog 2008/2009

g

&

Si

gn

al

Pr

oc

ess

ing

Product Catalog 2008–2009

N , SO P I , r Fibe

ET

/S

, DH

Ro

ut

in

network-electronics.com • vpginc.com

ISO 9001

RoHS

Network Electronics is ISO 9001:2000 certified.

RoHS – the Restriction of the use of certain Hazardous Substances in

ISO 9001 Certified

an EU directive banning electrical and

m Ne k

electronic equipment containing more

o

r Ce

tific ion at

electrical and electronic equipment is

than agreed level of certain hazardous substances from 1 NORWEGIAN ACCREDITATION QUAL 001

Certificate no. 900752

July 2006.

It is very important that manufacturers show commitment to the outside environment, and many customers, even outside Europe, ask for RoHS compliance at tender stage.

The ISO 9001:2000 certification of Network Electronics’s systems and internal routines is a proof of our commitment

Both Network Electronics’ product lines VikinX and Flashlink

to steadfast quality improvement throughout the

are compliant with the requirements of Directive 2002/95/

organisation.

EC on the Restriction of the use of certain Hazardous Substances (RoHS).

In today’s demanding business environment, this is an important certification both for the manufacturer and even more important for demanding customers who do not want

WEEE

to spend time auditing suppliers.

One of the challenges in the world is the growing amounts of Electronic Equipment

As part of the ISO 9001:2000 certification, an independent

(EE) waste that is not sorted and treated

accredited board will carry out annual audits of the

properly. Network Electronics has

company’s systems and routines.

implemented return facilities for all products that we bring to market.

NEBS Level 3

Network Electronics is fully compliant with the requirements

Many products from Network / VPG have been tested to

of Directive 2002/96/EC on the Waste Electrical and

verify their compliance with the requirements of NEBS (or

Electronic Equipment (WEEE).

“Network Equipment Building System”) Level 3. Products that meet these stringent environmental safety and electromagnetic compatibility standards are qualified for use in telecom central office environments in the United States, and customers around the world recognize the level of reliability indicated by a NEBS Level 3 certification.

The specifications for NEBS are managed by Telcordia Technologies (www.telcordia.com).

Contents Chapter 1

VPG Intro page 8

1.1 Ventura .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Ventura Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Element Management . . . . . . . . . . . . . . . . . . . . . . . .

Monitoring and Test System . . . . . . . . . . . . . . . . . .

Time Division Multiplexing . . . . . . . . . . . . . . . . . . . .

SONET/SDH Network Interfaces .. . . . . . . . . . . . . . .

Wavelength Division Multiplexing .. . . . . . . . . . . . .

Converters and Embedders/De-embedders .. . . . .

Single Channel Fiber .. . . . . . . . . . . . . . . . . . . . . . . . .

High Definition .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

IP Network Interfaces . . . . . . . . . . . . . . . . . . . . . . . . .

Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Speciality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SFP Selection Index .. . . . . . . . . . . . . . . . . . . . . . . . . .

10 13 16 18 25 26 30 44 54 64 66 70 76

1.2 Plus Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Monitoring and Test System .. . . . . . . . . . . . . . . . . . 78 TV-1 Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 TV-C Plus .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Chapter 2

10

1.3 BravoNet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

BravoNet Chassis and Power Supply .. . . . . . . . . . .

Element Management . . . . . . . . . . . . . . . . . . . . . . . .

Monitoring and Test System .. . . . . . . . . . . . . . . . . .

ASI Multiplexer/Network Adapter . . . . . . . . . . . . . .

ASI/SDI 270 Multiplexer/Network Adapter . . . . . .

ASI/SDI Protection Switching . . . . . . . . . . . . . . . . . .

84 86 88 90 96 100

84

78

Network Intro page 102

2.1 Flashlink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Flashlink Housings .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Frame .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 N-BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 MOT-BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Flashlink Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

System Controller (GYDA-SC) .. . . . . . . . . . . . . . . . . 110 Modular Distribution Amplifiers .. . . . . . . . . . . . . . . 112 Embedders/De-embedders . . . . . . . . . . . . . . . . . . . . 116 HD to SD Downconverter with Framesync and ARC .. . . . . . . . . . . . . . . . . . . . . 129 Video Conversion .. . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Audio Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Synchronisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Automatic Changeover Modules . . . . . . . . . . . . . . . 136 EO and OE Converters . . . . . . . . . . . . . . . . . . . . . . . . 137 Time Division Multiplexers .. . . . . . . . . . . . . . . . . . . . 146 RF over fiber Modules .. . . . . . . . . . . . . . . . . . . . . . . . 147 Datacom Interfaces .. . . . . . . . . . . . . . . . . . . . . . . . . . 148 RS-422 and GPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 Automatic Protection Switching and Optical Distribution .. . . . . . . . . . . . . . . . . . . . . . 150 2 ch. WDM – Optical Multiplexing . . . . . . . . . . . . . 151 Optical Multiplexing .. . . . . . . . . . . . . . . . . . . . . . . . . 152 Optical Multiplexing / CWDM .. . . . . . . . . . . . . . . . 154 Optical Multiplexing / DWDM . . . . . . . . . . . . . . . . . 155 EDFA .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 IP Gateways .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Flashlink Micro .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Distribution Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . 163 Embedders/De-embedders . . . . . . . . . . . . . . . . . . . . 164 Video Conversion .. . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 Audio Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 Synchronisation Modules .. . . . . . . . . . . . . . . . . . . . . 165 Automatic Changeover Modules . . . . . . . . . . . . . . . 165 EO and OE Converters . . . . . . . . . . . . . . . . . . . . . . . . 166 Datacom Interfaces .. . . . . . . . . . . . . . . . . . . . . . . . . . 167 Flashlink Micro Accessories . . . . . . . . . . . . . . . . . . . . 167 1RU Compact Distribution Amplifiers .. . . . . . . . . . . . . . . . .

106

110

162

2.2 VikinX .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 VikinX Sublime .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

173 Analog Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174 Analog Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 SD Digital Video .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 3G-HD Digital Video .. . . . . . . . . . . . . . . . . . . . . . . . . 177 Digital Audio .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 RS-422 Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 VikinX Sublime Accessories . . . . . . . . . . . . . . . . . . . . 180 VikinX Modular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

181 Redundancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 Modular Frames .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 SD Digital Video .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184/186 HD Digital Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185/187 Analog Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Digital Audio .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 Telecom .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 VikinX Configuration, Control and Monitoring .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

190 Direct and remote control .. . . . . . . . . . . . . . . . . . . . 191 Control and Monitoring .. . . . . . . . . . . . . . . . . . . . . . 192 Ethernet Connections .. . . . . . . . . . . . . . . . . . . . . . . . 193 Control Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 VikinX Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 VikinX Compact .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

202 Analog Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 Analog Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 Component Analog Video .. . . . . . . . . . . . . . . . . . . . 206 SD Digital Video .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 Digital Audio .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Telecom .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 RS-422 Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212

VikinX Accessories .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 Power Supply Frames . . . . . . . . . . . . . . . . . . . . . . . . . 214 Desktop Power Supply . . . . . . . . . . . . . . . . . . . . . . . . 215

168

2.3 NETCARE .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216

Flashlink Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 171

network-electronics.com

|3

The Global Video Transport Leader

Network Electronics designs, manufactures and markets a portfolio of video transport solutions of unrivalled breadth and depth.

The acquisition of Video Products Group, Inc. (VPG) of Oxnard, California in January of 2008 has further enhanced the company’s global presence and reputation for providing industry leading solutions to the video, broadcast and telecommunications markets.

Network

Electronics’

competitive

solutions

are highly functional and deployment-proven, creating future-proof transport architectures that fully meet campus, short-haul, metro and long-distance.

For contact information: www.network-electronics.com

The Global Video Transport Leader

Ventura • SONET/SDH and IP network interfaces and multiplexers • JPEG 2000 and MPEG-2 encoders and decoders • Optical multiplexing; CWDM and DWDM • Multi-format metropolitan transport • Carrier class specifications and features (NEBS)

Flashlink • Fiber optics • Optical multiplexing; CWDM and DWDM • Time division multiplexing • Signal processing and distribution • Highly cost-efficient • Very compact and low-power

VikinX – routing range • VikinX Sublime – Ethernet control – 3Gbps single link support for 1080p HDTV – Ultra low power consumption – Sizes from 8x8 to 64x64 • VikinX Modular – HD-SDI, SD-SDI, analog audio, AES/EBU – Configuration up to 256x256 with

6 | network-electronics.com

increments of 32x32

network-electronics.com

|7

Ventura Versatile solutions

3 compliance. Ventura cards are hot-swappable, and in

The Ventura™ line of modular signal transport solutions

many instances are field-configurable, using SFP modules

is designed with carrier-class specifications and features in

to support CWDM, DWDM and 1310/1550 transport.

mind. Whether it is dark fiber transport, telco interfacing to

Ventura equipment protects signal integrity with integrated

SONET/SDH or IP with or without signal multiplexing, the

HD jitter attenuation, sub-millisecond recovery from

Ventura platform fulfils today’s and future signal transport

signal interruptions and a self-configuring browser-based

needs. The NEBS-compliant Ventura platform can transport

management system.

analog or digital video with associated audio as well as data in a variety of formats, thus providing probably the

Network / VPG is extending the Ventura line with the

most versatile products for high quality content delivery.

introduction of new modules developed to facilitate the

JPEG 2000 and MPEG2 compression schemes enable video

compression, transmission and economical transport of HD

transport over a wide range of network interfaces and bit

signals. The new modules, including a JPEG 2000 encoder

rates.

and decoder, an 8-channel SONET/SDH multiplexer and

Flexible networks

de-multiplexer, and a universal analog digital video/audio adapter for fiber optic transport, provide Ventura customers

Ventura products provide conversion and transport

with greater ability to meet the challenges of transporting

solutions for non-compressed analog and digital optical

high definition signals and managing diverse legacy and

signals, mostly in the metro area network environment.

emerging signal formats. The compression and long

The extensive selection of Ventura cards and space-

distance interfaces extend the reach of the Ventura line, and

efficient Ventura chassis enable customers to create flexible

the universal conversion capability enables customers to

networks—networks that support a wide variety of formats,

adapt to evolving regulatory requirements in metropolitan

recover nimbly from signal interruptions and provide a long-

networking.

lasting return on investment.

Adaptable capabilities

Key features • Metropolitan area and long distance networking

The Ventura line supports all video formats, as well as

• SONET/SDH and IP network interfaces and multiplexers

Ethernet, RS422, DS3 and 155Mbps signals. The VS103 3RU,

• JPEG 2000 and MPEG-2 encoders and decoders

10-slot chassis and the VS101 1RU, 3-slot chassis can each

• Optical multiplexing; CWDM and DWDM

run on AC or DC power, are compatible with all Ventura

• Carrier-class specifications and features (NEBS)

cards, and meet the stringent requirements of NEBS Level

BRAVOnet Robust bandwidth operations

on a single DS3 line, or for slipless ASI switching—

BRAVOnet is Network / VPG’s high port-density, carrier-class

technology that transforms a signal-break event from a 7 –

transport product suite that provides telco operators and

10 second viewer annoyance and advertiser nightmare into

broadcasters with a solution for transporting multiple DVB-

an imperceptible switch to the alternate signal source.

ASI signals and different video formats over SONET/SDH and PDH telco networks with an unmatched bandwidth

Features

utilization.

• ASI bandwidth optimization

Optimized real-time performance BRAVOnet boasts the highest ASI payload in the industry, with up to 16 ASI streams on DS3 and OC-3 networks. Like the Ventura line, BRAVOnet provides carrier-class, NEBS

• Maximizes ASI payload capacity • Simultaneous transport of multiple compressed and uncompressed digital video signals • Manages, controls and protects each transport stream individually

Level 3 compliant, transport, but BRAVOnet specializes in

• Duel-channel intelligent slipless switching

optimizing the structured formats and multiplexing for

• Full transport stream protection for digital television

long distance. Customers select BRAVOnet for bandwidth

networks

efficiency, such as its ability to carry two ATSC-HD channels

PLUS Series Point-to-point fiber optic ­transport solutions

value and space efficiency with the convenience of a Web-

TV-C PLUS encoders and decoders perform high quality

automated alerts for DVB-ASI, SDI, SDTI and associated

MPEG2 compression of SDI or composite video as well as

audio signals, these element management products provide

analog or digital audio. TV-C PLUS comes with a variety

tools to simplify deployment of a standard template of

of interfaces for SDH/PDH, IP and DVB-ASI networks. The

chassis and cards to multiple remote locations.

intuitive graphical user interface of the TV-C PLUS software shortens setup time and eases operation.

FOCUS Element Management Simplified deployment

based interface. In addition to monitoring and providing

Cost efficient Network / VPG’s element testing and management solutions offer high visibility and powerful troubleshooting tools at an extremely low cost per channel. Every level of ETR 101 – 290

The Focus product line supports sophisticated signal

reporting for up to sixteen channels can be made available

integrity analysis and trouble-shooting of transport

from a 1RU monitoring system. Network / VPG network

equipment––whether the equipment is from Network /

management products are designed to achieve a maximal

VPG or another vendor. Focus products combine attractive

result with a minimal cost of ownership.

network-electronics.com

|9

VENTURA

1.1 Chassis VS101-AC / VS101-DC

1RU Chassis for the Ventura Series • Both AC and DC versions available • 3 slots for any combination of cards from the Ventura series • Single, field-replacable power supply included • A second, external, field-installable power supply option is available for AC or DC which includes a dual redundant load-sharing board • Hot swappable cards in any slot • Field serviceable fans • Transparent front panel to view card LEDs • Sliding front panel for card access • 19” rack mountable with removable flange for center or wall mounting • Optional Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet, without occupying a card slot • NEBS Level 3‑compliant DC version for central office applications

AC Power Supply (Internal) chassis Voltage Power Frequency Current Efficiency Weight

90-250VAC, 90-264VAC 60W 47-63Hz 1.1A max 82% typical 10.0 lbs. (4.5 kg)

ELEMENT management Optional advanced element management features SNMP and Web browser interfaces that provide monitoring and/or configuration of the status, alarms and controls for Ventura series cards installed in a VS101 chassis. The element management card is installed over the power supply so that it does not occupy or interfere with card slots. An RJ45 connector is located on the rear of the chassis for access to the network system. An RJ11 jack is also provided for connecting an RJ11-to-DB9 converter cable for serial access.

Physical and Environmental # of Card Slots 3 Rack Space 1RU x 19” rack Dimensions 1.75” x 19” x 14” Cooling Field serviceable fans Grounding Nut Use 18 AWG or thicker Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85%

10 | network-electronics.com

Redundant AC Power Supply (External) Voltage Power Frequency Current Efficiency Weight

90-264VAC 50W 47–63Hz 1.35A max 75% typical 1.2 lbs. (0.54 kg)

DC Power Chassis Voltage Power Efficiency Weight

35-72 VDC 50W 81% typical 10.0 lbs. (4.5 kg)

Redundant DC Power Supply (external) Voltage Power Efficiency Weight

35-72 VDC 50W 81% typical 2.0 lbs. (0.9 kg)

Ordering Options VS101-3-AC 1RU AC Ventura chassis with 3 card slots VS101-3-PSAC Internal power supply VS101-3-RPSAC Redundant AC power supply (load sharing board included) VS101-3-DC 1RU DC Ventura chassis with 3 card slots VS101-3-PSDC Internal DC power supply VS101-3-RPSDC Redundant DC power supply (load sharing board included) VS101-3-EMS Built-in comprehensive element management VS101-3-AEMS Built-in Advanced Element management

VENTURA

Chassis and Power Supplies

1.1

VS103 / VS113 / VS123

VS103 4RU Chassis and VS113-A/C and VS123-D/C Power Supplies • Robust carrier-class design • 10 slots for any combination of cards from the Ventura series • Dual redundant load sharing power supplies, available in AC or DC, ensure maximum system up time • Hot swappable cards and power supplies • Field serviceable fans ensure system longevity • Front panel summary LEDs of power supply status, board monitors and fan monitors • Drop-down door for card access • Passive chassis backplane • 19” rack mountable • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

ELEMENT management FCS183-AEMS features SNMP and Web browser interfaces that provide monitoring and/or configuration of the status, alarms and controls for Ventura series cards installed in a VS103 chassis.

Physical and Environmental # of Card Slots 10 Rack Space 4RU x 19” rack Dimensions 5.25” x 19” x 14” Weight AC chassis: 11.22 lbs.

DC chassis: 10.93 lbs.

Power Input Connectors AC–IEC320 DC–3 way terminal screw Fuse AC–4A/250V DC–5A anti-surge Cooling 3 field-replaceable fans per tray located underneath each PSU and top front exhausting fan tray, alarmed, redundant and field-replaceable Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Summary LED Indicators System LEDs Three sets of summary alarm LEDs are visible on the front of the VS103 when the door is closed. LED set includes power supply status, board monitors and fan monitors.

Backplane Power LEDs DC Power Green Major Red Minor Yellow Board Monitors LEDs Major Red Minor Yellow Fan Monitors LEDs Major Red Minor Yellow

Alarm and Monitoring Connector A 37-way D-Type connector provides direct access to the major and minor alarm lines and serial bus for each card in the chassis.

Ordering Options VS103-AC-IFA 4RU AC Ventura chassis VS103-DC-IFA 4RU DC Ventura chassis VS113 AC power supply VS123 DC power supply VS111 1RU heat baffle VS112 1RU heat baffle with fans FCS183-AEMS Advanced Element Management System FCS183-EMS Element management system

AC Power Supplies Voltage Power Frequency Efficiency Weight

90–264VAC 200W 47–63Hz 70% at full load 1.67 lbs.

LED indicators Power LEDs AC Power Green Major Alarm Red Minor Alarm Yellow

Ordering Options VS103-AC-IFA 4RU AC Ventura chassis VS113 AC power supply

dc power supplies Voltage Power Efficiency Weight

35-72 VDC 200W 70% at full load 1.70 lbs.

LED indicators Power Monitors DC Power Green Major Alarm Red Minor Alarm Yellow

Ordering Options VS103-DC-IFA VS123

4RU DC Ventura chassis DC power supply

network-electronics.com

| 11

VENTURA

1.1

12 | network-electronics.com

VENTURA

Element Management

1.1

FCS183

Web browser with SNMP Element Management System • Web browser and SNMP user interfaces • Automatic card recognition • User definable alarms (major, minor or no alarm) • Status and configuration of card settings • Provides history with date/time stamping for each card • Two levels of user and password access privileges • Fan and power supply alarm status • Inband element management • Firmware remotely downloadable over Internet/Intranet • Provides interface to third party element management systems through standard SNMP MIBs • Access up to 32 chassis through a single IP address or via one RS232 port • NEBS Level 3 compliant

Network VS103 Ventura chassis V S 1 8 3

Ethernet

snmp

# of Trap Destinations Trap Information Trap Configuration

MIB II sysDesc sysObject sysUpTime sysContact sysName sysLocation sysServices 5 Trap number Trap attachment through Web browser interface

RS232 Connector Baud Rate

S L O T

S L O T

S L O T

S L O T

S L O T

S L O T

S L O T

S L O T

# 2

# 3

# 4

# 5

# 6

# 7

# 8

# 9

# 10

Element Management

Connector RJ45 Link Speed 10Mbps (10BaseT) IP Settings IP Address Subnet Mask Gateway Password Levels Administrator User Operating Systems Windows 98 Windows 2000 Professional Windows XP Professional Linux Web browsers Internet Explorer 6.0 Netscape 7.2

Standard MIB Parameters

S L O T

DB9 (female) 9600, 1 stop bit, 8 data bits, no parity

Features SNMP and Web browser interface that provides monitoring and/ or configuration of the status, alarms and controls for Ventura series cards installed in a VS103 chassis.

Sample Alarms Loss of input Loss of video EDH errors Loss of audio Laser failure Optical low light Upstream transmitter alarms Sample Status Control settings SFP transmitter wavelength SFP transmitter output power Model and serial number Sample Controls Laser transmitter (enable or disable) Control set by (netman or onboard switches) Receiver input mode (optical or electrical) SDI default signal (ON or OFF) Mux channel (enable or disable) Test pattern generator (enable or disable) Line standard (NTSC or PAL)

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +5V Power Consumption 2W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options LED indicators FCS183-AEMS Activity Link DC power

FCS183

Focus comprehensive element management card

network-electronics.com

| 13

VENTURA

1.1 Advanced Element Management FCS183-AEMS

Advanced Element Management System

SNMP agent #1 SNMP manager #1

Get, Set Inform

SNMP agent #N BRAVOnet

Get, Set

Network

AEMS

Inform

SNMP manager #N

SNMP agent

Web browser Web browser Web server #X

Web manager #X

VS103 Ventura chassis F A N

P O W E R

P O W E R

# 2

# 1

V S 1 8 3 A E M S

S L O T

S L O T

S L O T

S L O T

S L O T

S L O T

S L O T

S L O T

S L O T

# 2

# 3

# 4

# 5

# 6

# 7

# 8

# 9

# 10

The FCS183-AEMS is a Linux-based element management card managing the Ventura series cards. It acts as an SNMP agent for all cards in the shelf, controls and configures them using a Web browser and stores all the data in Flash (buffer) memory. The FCS183-AEMS can be configured to control other cards using a remote and secure Telnet session.

The FCS183-AEMS is unobtrusive in installing or uninstalling and acts automatically as soon as a new card is inserted in one of the slots in the shelf.

It uses residual power to save the data and shuts down in a controlled manner.

• Automatic recognition, control and operation of line cards • Web browser and SNMP based monitoring and controlling • Remote firmware download for FCS183-AEMS and other line cards using remote and secure Telnet session • Date/time stamped history and data recording in Flash memory (buffer) • Chassis environment reporting using temperature and fan speed sensor (LED indicators) • On-board microprocessor details: 100MIPS, 32-bit RISC based SoC, External 128Mb flash and 64Mb SDRAM • Safe operation transfer to updated firmware (starts using new firmware after validation) • Linux-based system • User definable alarms based on priority (major, minor or no alarm)

14 | network-electronics.com

VENTURA

Advanced Element Management

1.1

FCS183-AEMS

Advanced Element Management System

Back plane

FCS183-AEMS Front Panel LEDs and RJ-45

Linux based single board computer 32-bit SoC 100MIPS

DIP Switch

Connector panel

Ethernet Transformer

RJ-45

PC and Alarm Processing

IDC-50

Serial Ports

RS232 (x2)

PC Lines and Alarms

128Mb Flash 64Mb SDRAM Programmable General Purpose I/O

GPIO (8 I/Os)

Power Conversion

FCS183-AEMS as snmp agent A single FCS183-AEMS acts as the proxy agent for up to 9 Ventura line cards, 2 power supplies and the fan assembly placed in the VS103 chassis.

Element management Features SNMP and Web browser interfaces that provide monitoring and/ or configuration of the status, alarms and controls for Ventura series cards installed in a VS103 chassis. Some of the features are given below: – SNMPV2c ready – Telnet based remote and secure login – Remote firmware downloads

LED INDICATORS DC DC power supply status ECG Device status LINK Ethernet link status ACT Ethernet activity status CARD VS-183 AEMS alarm status SHELF Line cards alarm status PROG Can be user configured

PHYSICAL and Environmental FCS183-AEMS – AEMS card resides in a single slot of a VS103 Ventura series chassis.

Voltage 5V or 3.3V chassis supply Power Consumption 2W max Operating Temp 0 °C/32°F to 50 °C/122°F Storage Temp -40 °C/-40°F to 85 °C/185°F Relative Humidity 5% to 85% Compliance NEBS level 3, UL, CSA, CE, FCC (Part 15, Class A), C-TICK, and RoHS.

Connector Types Ethernet Telnet Remote Linux system configuration FTP Firmware downloads HTTP Web browser access SNMP Element management Connector RJ45 10/100 Mbps No. of Connectors Single access dual interface (front and rear access: Two ports are provided for a common access) Password Levels Administrator/User Operating Systems Windows 98, 2000 Pro, XP Pro and Linux Web browser Internet Explorer 6.0 Netscape Navigator 7.2 Mozilla Firefox 1.0 (Newer version supported) RS232 / EIA232 For Linux system configuration Connector DB9 (male) No. of Connectors 2 Baud Rate Up to 115200, 1 stop bit, 8 data bits, no parity GPIO To interface Ventura chassis with user’s equipment Connector Micro-D 9-pin No. of Connectors 1, with 8 user configured, TTL compatible I/O lines

Ordering Options FCS183-AEMS Advanced Element Management System card GPIO Cable FCS183-AEMS general purpose input/output card connector cable

network-electronics.com

| 15

VENTURA

1.1 Monitoring and Test System FCS1000

DVB-ASI/SDI Monitoring and Test System

FCS1000 provides a high-density, cost-effective QoS monitoring solution.

Each input has a 270Mbps interface, allowing monitoring of either DVB-ASI signals or serial digital video signals. Service management is provided via an embedded PC-based processor which provides a full Simple Network Management Protocol (SNMP) interface and Web browser display. All alarm conditions can be mapped into SNMP traps as well as individual GPI outputs for local alarms.

• In-service monitoring for up to 16 channels in 1RU • DVB-ASI or SMPTE 259 SDI capable • Checking of all DVB input streams to ETR 101 290 • Checking to SMPTE RP165 on SDI input streams • High-impedance passive ‘BNC Tee’ for each channel • Comprehensive SNMP traps and informs • Separate GPI contact alarms for each channel • Full internal diagnostics • ASI stream handling from 16Kbps – 216Mbps • 10/100baseT Ethernet management port • Serial port communications for local diagnostics and ISDN/PSTN adapters • Powerful alarm filtering and logging • QoS profile presets and weekly scheduling • Remote uploads of new schedules and firmware upgrades

16 | network-electronics.com

VENTURA

Monitoring and Test System

1.1

FCS1000

DVB-ASI/SDI Monitoring and Test System

OPERATION Browser based, multi-channel, menu-driven QoS monitoring system.

Configurable for SDI or ASI in groups of four. A set-up screen for each group of four allows for detailed monitoring from top level alarms and faults, right down to fine-grain details of SMPTE RP165 or ETR 101290.

Up to four different program profiles can be pre-loaded for each channel and a scheduler screen allows for one full week of profile scheduling.

An alarm conditioning/filtering/logging screen provides for alarm persistence and hold time filtering as well as criticality assignment and threshold settings. Individual channel SNMP informs are generated and sent based on the settings of this screen.

DVB-ASI Monitoring SMPTE 259M SDI Monitoring ETR 101 290 SMPTE RP165 Signal present Signal present TS sync loss EDH–Missing TS sync byte errors EDH–Packet error PAT error Active Picture (AP) EDH error here Continuity count error AP error detected already PMT error AP unknown error status PID error Full Field (FF) error detected here PCR error / accuracy FF error detected already CAT error FF unknown error status NIT error Ancillary (ANC) error detected here SDT error ANC error detected already EIT error ANC unknown error status RST error Other alarms TDT error Video black RS FEC Error Freeze frame Continuity count Audio (group error, silence, phase and overload)

Power and Environmental Power Automatic 110~240 V AC, IEC connector Power Consumption 0.15A , 240VAC, <35W Cooling Forced via side intake and exhaust vents Operating Temperature Between 0 °C and 50 °C Operating Humidity 10% to 90% (non-condensing)

ELEMENT management Features SNMP and Web browser interfaces that provide monitoring and/ or configuration of the status, alarms and controls. Some of the features are: - SNMP V2c ready - Telnet based remote and secure login - Remote firmware downloads

Connector Types Ethernet Telnet Remote Linux system configuration FTP Firmware downloads HTTP Web browser access SNMP Element management Connector RJ45 10Mbps No. of Connectors Single access (16 channels) Password Levels Administrator/User Operating Systems Windows 98, 2000 Pro, XP Pro and Linux Web browser Internet Explorer 6.0 Netscape Navigator 7.2 RS232 / EIA232 For Linux system configuration (two connectors, front and rear access) Connector DB9 (male) No. of Connectors 2 Baud Rate Up to 115200, 1 stop bit, 8 data bits, no parity GPIO To interface Ventura chassis with user’s equipment Connector DSUB-25 pin No. of Connectors 1, with 16 TTL compatible I/O lines

Physical Width Height Depth Weight

Front panel: 19” EIA standard (483mm) (exc. rack ears: 440m) 1.7” (43mm), 1RU 19” (484mm) (including rear connectors) 11lbs. (5kg) (6kg with delivery packing)

Ordering Options FCS1000

Focus Monitoring and Test System (formerly named TIMS)

network-electronics.com

| 17

VENTURA

1.1 Time Division Multiplexing VS411

4-Channel SDI/ASI Multiplexer/Demultiplexer • Multichannel digital data on a single fiber • Designed to transport 270Mbps signals complying with SMPTE-259M, 305M and DVB-ASI EN-50083-9 • Removes timing and alignment jitter from the SDI signals at the demux output • Loss of video, loss of optical input, laser failure LEDs • Automatic cable equalization up to 300m for Belden 8281 • Selectable test pattern generator for each channel • Enable/disable control for each channel • EDH QoS monitoring on each channel for SDI • Auxiliary RS422 channel • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 and any ITU CWDM or DWDM wavelengths • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

VS411-EO

VS411-OE

Front panel monitor

CH1 SDI (SMPTE-259M) CH2 SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH3 CH4

Front panel monitor

1310/1550/CWDM

APD Rcv’r

1.302Gbps 1310/1550/CWDM

270Mbps Network

APD Rcv’r

RS422

Digital video

CH2 SDI (SMPTE-259M) SDTI (SMPTE-305M) CH3 DVB-ASI (EN50083-9) CH4 RS422

ELEMENT management

Standards

SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of inputs 4 (VS411-EO) # of outputs 4 (VS411-OE) Monitors 1 (VS411-EO and VS411-OE) Connector BNC Impedance 75 Ohm Data rate 270Mbps Equalization Up to 300m w/Belden 8281

Optical transmitter # of outputs Connector Data rate Laser type Laser wavelengths Output power level Fiber type

CH1

1 SC/PC 1.3Gbps SFP 1310nm, 1550nm, CWDM, DWDM –1dBm min Single mode

optical receiver # of inputs 1 Connector SC/PC Receiver type APD pigtail Input wavelengths 1260nm – 1620nm Sensitivity ≤–32dBm Max input power –8dBm Fiber type Single mode

RS422 # of channels 1 Connector 3 pin polarized header Data rate Up to 1Mbps

LED indicators VS411-EO VS411-OE Channel 1 loss of video Channel 1 loss of video Channel 2 loss of video Channel 2 loss of video Channel 3 loss of video Channel 3 loss of video Channel 4 loss of video Channel 4 loss of video Laser failure Loss of input

18 | network-electronics.com

Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms Channel 1 loss of video Channel 2 loss of video Channel 3 loss of video Channel 4 loss of video Laser transmitter failure (VS411-EO) Loss of input (VS411-OE) Status Model and serial number Transmitter power level (VS411-EO) SFP laser transmitter wavelength (VS411-EO) SFP receiver installed (VS411-OE) Receiver power level (VS411-OE) Laser power Optical receiver power Controls Laser transmitter enable/disable (VS411-EO) Pattern generator enable

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +5V, +12V, -12V Power consumption 9W max Operating temperature 0 ˚C to 50 ˚C chassis ambient Storage temperature –40 ˚C to 85 ˚C ambient Relative humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS411-EO-SFP Transmitter w/SFP cage, no optics installed VS411-OE APD receiver installed SFP Options SFP-T3-1310-S SFP-T3-1550-S SFP-T3-1470-C SFP-T3-1490-C SFP-T3-1510-C SFP-T3-1530-C SFP-T3-1550-C SFP-T3-1570-C SFP-T3-1590-C SFP-T3-1610-C

1310nm laser 1550nm laser 1470nm CWDM laser 1490nm CWDM laser 1510nm CWDM laser 1530nm CWDM laser 1550nm CWDM laser 1570nm CWDM laser 1590nm CWDM laser 1610nm CWDM laser

VENTURA

Time Division Multiplexing

1.1

VS411-OO

4-Channel SDI/ASI Optical Regenerator • Optical regeneration of multichannel digital data on a single fiber • Designed to regenerate optical signal of data rate 1.3025 Gbps from any VS411-EO • Removes timing and alignment jitter from the SDI signals at the demux output • Loss of optical input, laser failure LEDs • Small Form-factor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

VS411-EO

CH1 SDI (SMPTE-259M) CH2 SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH3 CH4

VS411-OO

270Mbps 1.3Gbps

1310/1550/ CWDM

APD Rcv’r

1.3Gbps

VS411-OE

1.3Gbps

1310/1550/ CWDM

APD Rcv’r

270Mbps

RS422

Digital video Standards

RS422

ELEMENT management 1.3025Gbps

Optical transmitter # of Outputs Connector Data Rate Laser Type Laser Wavelengths Output Power Level Fiber Type

CH1

CH2 SDI (SMPTE-259M) SDTI (SMPTE-305M) CH3 DVB-ASI (EN50083-9) CH4

1.3Gbps

1 SC/PC 1.3025Gbps SFP 1310nm, 1550nm, CWDM, DWDM –1dBm min Single mode

Compatible with the FCS183 and FCS183-AEMS that feature SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms Laser transmitter failure Loss of input Status Model and serial number SFP laser installed Laser enable Laser wavelength (nm) Laser power (dBm) SFP receiver installed Optical receiver power (dBm) Controls Laser transmitter enable/disable

optical receiver # of Inputs 1 Connector SC/PC Receiver Type APD SFP Input Wavelengths 1260nm–1620nm Sensitivity ≤–32dBm Max Input Power –8dBm Fiber Type Single mode

LED indicators Laser failure Loss of input

physical and environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Power Consumption +3.3V, +5V, 5W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS411-OO SFP Options SFP-T3-1310-S SFP-T3-1550-S SFP-T3-1470-C SFP-T3-1490-C SFP-T3-1510-C SFP-T3-1530-C SFP-T3-1550-C SFP-T3-1570-C SFP-T3-1590-C SFP-T3-1610-C

Optical regenerator with SFP-R3-APD receiver installed 1310nm laser 1550nm CWDM laser 1470nm CWDM laser 1490nm CWDM laser 1510nm CWDM laser 1530nm CWDM laser 1550nm CWDM laser 1570nm CWDM laser 1590nm CWDM laser 1610nm CWDM laser

network-electronics.com

| 19

VENTURA

1.1 Time Division Multiplexing VS411-EO-SFP-SFP* / VS411-OE-SFP-SFP*

4-Channel SDI/ASI Fiber Multiplexer/Demultiplexer with Protection

VS411-EO

VS411-OE

Front panel monitor

Front panel monitor

CH1

SDI (SMPTE-259M) CH2 SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH3 CH4 RS422

1310/1550/CWDM

APD Rcv’r

1.302Gbps 1310/1550/CWDM

270Mbps Network

APD Rcv’r

CH1

CH2 SDI (SMPTE-259M) SDTI (SMPTE-305M) CH3 DVB-ASI (EN50083-9) CH4 RS422

• Multichannel digital video on a single fiber • Optional second optical output for network path diversity (multiplexer) and optional second optical receiver for automatic switchover and network resilience (demultiplexer) • Designed to transport 270Mbps signals complying with SMPTE-259M, 305M and DVB-ASI EN-50083-9 • Removes timing and alignment jitter from the SDI signals at the demultiplexer output • LEDs to indicate loss of video, loss of optical input and laser failure • Automatic cable equalization up to 300m for Belden 8281 • Selectable test pattern generator for each channel with EDH • Enable/disable control for each channel • EDH QoS monitoring on each channel for SDI at multiplexer input and demultiplexer output • Auxiliary RS422 channel • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 and any ITU CWDM or DWDM wavelengths • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

*Scheduled availability Q2 2008

20 | network-electronics.com

VENTURA

Time Division Multiplexing

1.1

VS411-EO-SFP-SFP* / VS411-OE-SFP-SFP*

Digital video

ELEMENT management

Standards

SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of inputs 4 (VS411-EO) # of outputs 4 (VS411-OE) Monitors 1 (VS411-EO and VS411-OE) Connector BNC Impedance 75 ohms Data rate 270Mbps Equalization Up to 300m w/Belden 8281

Optical transmitter # of outputs Connector Data rate Laser type Laser wavelengths Output power level Fiber type

2 SFPs SC/PC 1.3Gbps SFP 1310nm, 1550nm, CWDM, DWDM –1dBm min Single mode

optical receiver # of inputs 2 SFPs Connector SC/PC Receiver type APD SFP Input wavelengths 1260nm – 1620nm Sensitivity ≤–32dBm Max input power ≥–8dBm Fiber type Single mode

RS422 # of channels 1 Connector 3 pin polarized header Data rate Up to 1Mbps

LED indicators VS411-EO-SFP-SFP VS411-OE-SFP-SFP Channels 1-4 Channels 1-4 LED Lights Green Signal Yellow Loss of signal Flash green Test pattern only Flash green Test pattern only Laser failure Loss of input

Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms On each video channel of EO and OE Loss of video EDH On network interface Laser transmitter failure on EO Loss of inputs on OE Status On each video channel of EO and OE Channel On or Off Format SDI or ASI SDI rate 525/60 or 625/50 Pattern generator enabled or disabled Pattern generator 525 or 625 line On network interface Laser present on EO Wavelength on EO Receiver present on OE Optical power on OE General Model and serial number Firmware revision Controls On each video channel of EO and OE Enable or disable channel Force SDI or ASI Enable or disable test pattern On network interface Enable or disable laser on EO

Ordering Options VS411-EO-SFP-SFP

Transmitter w/SFP dual cage, no optics installed VS411-OE-SFP-SFP Receiver with dual SFP cages and one SFP installed SFP Options SFP-T3-1310-S 1310nm laser SFP-T3-1550-S 1550nm laser SFP-T3-1470-C 1470nm CWDM laser SFP-T3-1490-C 1490nm CWDM laser SFP-T3-1510-C 1510nm CWDM laser SFP-T3-1530-C 1530nm CWDM laser SFP-T3-1550-C 1550nm CWDM laser SFP-T3-1570-C 1570nm CWDM laser SFP-T3-1590-C 1590nm CWDM laser SFP-T3-1610-C 1610nm CWDM laser SFP-R3-1APD APD SFP receiver

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +5V, +12V, -12V Power consumption 9W max Operating temperature 0 ˚C to 50 ˚C chassis ambient Storage temperature –40 ˚C to 85 ˚C ambient Relative humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

*Scheduled availability Q2 2008

network-electronics.com

| 21

VENTURA

1.1 Time Division Multiplexing VS811

8-Channel SDI/ASI Multiplexer/Demultiplexer • Multichannel digital data on a single fiber • Optional second optical output for network path diversity (Mux) and optional second optical receiver for automatic switchover and network resilience (Demux) • Designed to transport 270Mbps signals complying with SMPTE-259M, 305M, and DVB-ASI EN-50083-9 • Removes timing and alignment jitter from the SDI signals at the Demux output • Selectable test pattern generator for each channel: Color bars, PLL pathological, equalizer pathological and black field • Enable/disable control for Mux input channels • Automatic cable equalization up to 300m for Belden 8281 • Auxiliary RS422 channel • Small Formfactor Pluggable (SFP) optics available CH1 in 1310, 1550 or any ITU CWDM or DWDM CH2 wavelength 270Mbps CH3 CH4 • NEBS Level 3 compliant CH5 • Compatible with the FCS183-AEMS Advanced SDI (SMPTE-259M) CH6 SDTI (SMPTE-305M) Element Management System that provides remote DVB-ASI (EN50083-9) CH7 status, alarms and configurations via SNMP and CH8 Ethernet

VS811-EO

VS811-OE CH1 CH2 3.125Gbps

1310/1550/CWDM 1310/1550/CWDM

APD Rcv’r 270Mbps Network

CH3 3.125Gbps

APD Rcv’r

RS422

Digital video

CH6 SDI (SMPTE-259M) SDTI (SMPTE-305M) CH7 DVB-ASI (EN50083-9) CH8 RS422

external alarms

Standards

SDI (SMPTE-259M), SDTI (SMPTE-305M), DVB-ASI (EN50083-9) # of Inputs 8 (VS811-EO) # of Outputs 8 (VS811-OE) Connector BNC Impedance 75 ohm Data Rate 270Mbps Equalization Up to 300m w/Belden 8281

Optical transmitter # of Outputs Connector Data Rate Laser Type Laser Wavelengths Output Power Level Fiber Type

270Mbps

CH4 CH5

2 SC/PC 3.125 Gbps SFP 1310nm, 1550nm, CWDM, DWDM 0dBm min Single mode

N/C relay contact outputs for major and minor alarm signals.

element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms Loss of video Laser transmitter failure (VS811-EO) Loss of input (VS811-OE) Status Channels enabled/disabled (VS811-EO) Selected test pattern Test pattern generator enabled/disabled Model and serial number SFP transmitter installed Transmitter wavelength Laser power SFP receiver installed Optical receiver power Controls Test pattern generator enable/disable Input channel enable/disable (VS811-EO) Laser transmitter enable/disable (VS811-EO)

optical receiver # of Inputs 1 Connector SC/PC Receiver Type APD SFP Input Wavelengths 1260nm–1620nm Sensitivity ≤-30dBm Max Input Power –8dBm Fiber Type Single mode

RS422 # of Channels 1 Connector 3 pin polarized header Data Rate Up to 500 Kbps

LED indicators VS811-EO VS811-OE Channel 1 loss of video Channel 1 loss of video Channel 2 loss of video Channel 2 loss of video Channel 3 loss of video Channel 3 loss of video Channel 4 loss of video Channel 4 loss of video Channel 5 loss of video Channel 5 loss of video Channel 6 loss of video Channel 6 loss of video Channel 7 loss of video Channel 7 loss of video Channel 8 loss of video Channel 8 loss of video SFP Primary laser failure Loss of primary input SFP Second. laser failure Loss of secondary input DC power DC power

22 | network-electronics.com

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V Power Consumption 10W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS811-EO-SFP VS811-OE-SFP SFP-T3-1310-S SFP-T3-1550-S SFP-T3-1470-C SFP-T3-1490-C SFP-T3-1510-C SFP-T3-1530-C SFP-T3-1550-C SFP-T3-1570-C SFP-T3-1590-C SFP-T3-1610-C SFP-R3-APD

Multiplexer card w/dual SFP cages, no optics installed Demultiplexer card w/dual SFP cages, no optics installed 1310nm SFP laser module 1550nm SFP laser module 1470nm CWDM SFP laser module 1490nm CWDM SFP laser module 1510nm CWDM SFP laser module 1530nm CWDM SFP laser module 1550nm CWDM SFP laser module 1570nm CWDM SFP laser module 1590nm CWDM SFP laser module 1610nm CWDM SFP laser module SFP APD receiver

VENTURA

Time Division Multiplexing

1.1

VS811-OO

8-Channel SDI/ASI Optical Regenerator • Optical regeneration of mutichannel digital data on a single fiber • Designed to regenerate optical signal of data rate 3.125 Gbps from any VS811-EO • Removes timing and alignment jitter from the SDI signals at the demux output • Small Form-factor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

VS811-EO

VS811-OO

VS811-OE

CH1

CH1

CH2 270Mbps

CH3 CH4 CH5

SDI (SMPTE-259M) CH6 SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH7 CH8

3.125Gbps

1310/1550/ CWDM

APD Rcv’r

3.125Gbps

3.125Gbps

1310/1550/CWDM

1310/1550/ CWDM

APD Rcv’r

CH2 CH3 3.125Gbps

CH6 SDI (SMPTE-259M) SDTI (SMPTE-305M) CH7 DVB-ASI (EN50083-9) CH8

APD Rcv’r 1310/1550/ CWDM

RS422

Digital video Standards

RS422

element management 3.125Gbps

Optical transmitter # of Outputs Connector Data Rate Laser Type Laser Wavelengths Output Power Level Fiber Type

270Mbps

CH4 CH5

1 SC/PC 3.125Gbps SFP 1310nm, 1550nm, CWDM, DWDM –1dBm min Single mode

Compatible with the FCS183 EMS and FCS183-AEMS which feature SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms Laser transmitter failure Loss of input Status Model and serial number SFP laser installed Laser enable Laser wavelength (nm) Laser power (dBm) SFP receiver installed Optical receiver power (dBm) Controls Laser transmitter enable/disable

optical receiver # of Inputs 1 Connector SC/PC Receiver Type APD SFP Input Wavelengths 1260nm–1620nm Sensitivity ≤-30dBm Max Input Power –8dBm Fiber Type Single mode

physical and environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Power Consumption +3.3V, +5V, 5W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

LED indicators Laser failure Loss of input

external alarms N/C relay contact outputs for major and minor alarms signals.

Ordering Options VS811-OO-SFP SFP Options SFP-T3-1310-S SFP-T3-1550-S SFP-T3-1470-C SFP-T3-1490-C SFP-T3-1510-C SFP-T3-1530-C SFP-T3-1550-C SFP-T3-1570-C SFP-T3-1590-C SFP-T3-1610-C

Optical regenerator with SFP-R3-APD receiver installed 1310nm laser 1550nm CWDM laser 1470nm CWDM laser 1490nm CWDM laser 1510nm CWDM laser 1530nm CWDM laser 1550nm CWDM laser 1570nm CWDM laser 1590nm CWDM laser 1610nm CWDM laser

network-electronics.com

| 23

VENTURA

1.1 Time Division Multiplexing VS9345

DS3/E3 DVB-ASI TS Multiplexer Bandwidth Optimizer • Multiplexes four DVB-ASI inputs into one DS3 (45Mbps) or E3 (34Mbps) output • Maximizes ASI payload capacity (up to 43.8Mbps over a 45Mbps network) • Inputs can be switched to any output • Individual channel bandwidth ceiling provides total control over capacity available to client (to a resolution of 0.1Mbps per TS) • DVB validity check (PID, PAT, PMT, ES and SES) • Reed-Solomon FEC can be applied to each ASI TS for reliable MPEG-2 transmission • Each input TS is assigned conditional access codes (2 layers) for secure content delivery • Compatible with the FCS183 Advanced Network Management System that provides remote status, alarms and configurations via SNMP and Ethernet

MUx INPUT SIGNALS Input signal type

Maximum Payload Number of inputs Input/output levels Input impedance (ASI) Cable equalizer (max) OUTPUT SIGNALS Output signal type Framing Impedance/connector Number of outputs

Network management/alarms 270Mbps DVB-ASI - EN50083-9 or ASI2, containing data from 800kbps up to 43.8Mbps DS3 43.8Mbps E3 33.9Mbps 4 800mV(pk-pk) 75 ohm 200m of Belden 8281 cable

MUX CONTROLS Input rate setting Ch 1 to 4: Input bit rate ceiling, set to a resolution of 0.1Mbps RS FEC Ch 1 to 4: Add / don’t add DVB checking Ch 1 to 4: Check for PID, PAT, PMT, SES or ES errors DVB error threshold Sets thresholds for alarms Output mode Selects network interface type Channel ID codes Ch 1 to 4: Sets each TS’s conditional access codes (2)

45Mbps – DS3 (B3ZS) 34Mbps – E3 (HDB3) DS3 C-bit parity E3 G.751 75 ohm / BNC 2 identical buffered outputs

MUX ALARMS (set as either; none, major or minor) Card fail Card fault Input loss Ch 1 to 4: No input Input rate violation Ch 1 to 4: Allowable input bit rate exceeded Configuration error Wrong input type selected DVB error Channel 1 to 4: RS, PID, PAT, PMT, SES or ES errors

45Mbps – DS3 (B3ZS) C-bit parity 34Mbps – E3 (HDB3) G.751 75 ohm / BNC 2 with automatic switching for protection and 1 loop through for receiver chaining

DEMUX CONTROLS Standby protection switch Enable or disable automatic network standby switching Switch persistence Error persistence to enable protection switch to operate Input mode Selects network interface type BER threshold Sets BER alarm threshold Non-Consec. error Network error threshold Channel ID codes Ch 1 to 4: Sets each TS’s conditional

access codes (2)

Demux INPUT SIGNALS Input signal type Impedance/connector Number of inputs OUTPUT SIGNALS Output signal type Number of outputs

Impedance/connector

270Mbps DVB-ASI - EN50083-9 4 x 270Mbps DS3 / E3 75 ohm / BNC

Power consumption/environment VPG9345TX/RX Operating temperature Storage temperature Humidity

<20W (All options) 0 °C to +50 °C –10 °C to +70 °C 20% – 80% RH, non-condensing

DEMUX ALARMS (set as either; none, minor or major) Card fail Card fault Input loss Loss of frame alignment Configuration error Ch 1 to 4: Error in data type or conditional access code Input errors Ch 1 to 4: Rate exceeds programmed thresholds Standby input selected Standby network input is being used by DEMUX DVB error Channel 1 to 4: RS, SES errors

Ordering Options Contact factory for ordering information.

24 | network-electronics.com

VENTURA

SONET/SDH

1.1 VS811-S

SDI/ASI SONET/SDH Multiplexer/Demultiplexer • Multichannel digital video over OC-48c or STM-16 network tributary • Optional second optical output at Mux and optional second optical receiver at Demux for path diversity with automatic switch over • Manages SONET/SDH pointer adjustments • Removes timing and alignment jitter from the 270Mbps signals at the Demux output • Format independent 270Mbps inputs can carry SDI, SDTI and DVB-ASI • Enable/disable control for Mux input channels • Selectable test pattern generator for each channel: color bars, PLL pathological, equalizer pathological and black field • Automatic cable equalization providing 300m at 270Mbps • Auxiliary RS422 channel for inband management • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 and any ITU CWDM or DWDM wavelengths • NEBS Level 3 compliant VS811-SM-48 • Configurable to 1 HD and 2 SDs; CH1 scheduled availability in 2008 CH2 CH3 SDI (SMPTE-259M) CH4 SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH5 CH6 CH7 CH8

VS811-SD-48 CH1 CH2

OC-48c 1310/1550/DWDM 1310/1550/DWDM

CH3 CH4 SDI (SMPTE-259M) SDTI (SMPTE-305M) CH5 DVB-ASI (EN50083-9) CH6

APD Rcv’r SONET/SDH Network

APD Rcv’r

CH7

STM-16

CH8

RS422

Digital video Standards

SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of Inputs (VS811-SM-48) 8 x 270Mbps # of Outputs (VS811-SD-48) 8 x 270Mbps Connector BNC Impedance 75 Ohm Data Rate 270Mbps ± 100ppm Equalization 300m w/Belden 8281

Optical transmitter # of Outputs Connector Data Rate Laser Type Laser Wavelengths Output Power Level Fiber Type

RS422

Framing

1 primary with optional secondary (SFP) SC/PC 2.488Gbps (OC-48/STM-16) SFP 1310nm, 1550nm, CWDM, DWDM 0dBm min Single mode

Optical receiver # of Inputs 1 primary with optional secondary (SFP) Connector SC/PC Receiver Type APD SFP Input Wavelengths 1260nm – 1620nm Sensitivity ≤-30dBm at BER of 10E-10 Max Input Power –8dBm at BER of 10E-10 Fiber Type Single mode

RS422 # of Channels 1 Connector 3 pin polarized header Data Rate Up to 500 Kbps

LED indicators VS811-SM-48 VS811-SD-48 Channels 1-8 Channels 1-8 LED Lights Green Signal Yellow Loss of signal Flash green Test pattern only SFP Primary laser failure Loss of primary input SFP Secondary laser failure Loss of secondary input DC Power DC power

OC-48 STM-16

STS-48c, ANSI, T1.105 STM-16; ITU-Rec G.707

External alarms N/C relay contact outputs for major and minor alarm signals.

Element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms Loss of video and section, line, path Laser transmitter failure (VS811-SM-48) Loss of input (VS811-SD-48) Status Channels enabled/disabled (VS811-SM-48) Selected test pattern Test pattern generator enabled/disabled Model and serial number Controls Optical standard (SONET/SDH) Test pattern generator enable/disable Input channel enable/disable (VS811-SM-48) Laser transmitter enable/disable (VS811SM-48)

Physical and environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V Power Consumption 10W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering options VS811-SM-48 VS811-SD-48 SFP-T3-1310-S SFP-T3-1550-S SFP-T3-XX-D SFP-R3-APD

8X270Mbps multiplexer to SONET/SDH OC-48/STM-16, 2.485Gbps 8x270Mbps demultiplexer to SONET/SDH OC-48/STM-16 1310nm SFP laser module 1550nm SFP laser module where XX = ITU DWDM grid number SFP APD Receiver

network-electronics.com

| 25

VENTURA

1.1 Wavelength Division Multiplexing VS402/404/408

2-Channel, 4-Channel and 8-Channel Optical CWDM • Bidirectional channels • Environmentally stable • 20nm channel spacing • Low return loss • Very low insertion loss • ITU G.694.2 standards compliant • High channel isolation • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

VS402 cwdm Standards ITU-T G.694.2 # of I/O Channels 2 Common Output 1 Connector SC/PC Optical Wavelengths (nm) 1310, 1550 Channel Separation 20nm Insertion Loss 1dB max Link Loss w/mux/demux combo ≤2.0dB Return Loss ≥50dB Input Power 300mW max Polarization Dependent Loss ≤0.1dB Fiber Type Single mode

VS404 cwdm Standards ITU-T G.694.2 # of I/O Channels 4 Common Output 1 Connector SC/PC Optical Wavelengths (nm) 1510, 1530, 1550, 1570 Channel Separation 20nm Insertion Loss 1dB max Link Loss w/Mux/Demux Combo ≤2.0dB Return Loss ≥50dB Input Power 300mW max Polarization Dependent Loss ≤0.1dB Fiber Type Single mode

VS408 cwdm Standards ITU-T G.694.2 # of I/O Channels 8 Common Output 1 Connector SC/PC Optical Wavelengths (nm) 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610 Channel Separation 20nm Insertion Loss 1.5dB max Link Loss w/mux/demux combo ≤2.5dB Return Loss ≥50dB Input Power 300mW max Polarization Dependent Loss ≤0.1dB Fiber Type Single mode

26 | network-electronics.com

LED indicators VS402/VS404/VS408

DC power

ELEMENT management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Status

Model and serial number

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +5V Power Consumption <1W Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS402-CWDM VS404-CWDM VS408-CWDM

2-Channel CWDM optical multiplexer/ demultiplexer 4-Channel CWDM optical multiplexer/ demultiplexer 8-Channel CWDM optical multiplexer/ demultiplexer

VENTURA

Wavelength Division Multiplexing

1.1

VS409

9-Channel Optical CWDM • 8 CWDM wavelengths plus 1310nm legacy • Bidirectional channels • Environmentally stable • 20nm channel spacing • Low return loss • Very low insertion loss • ITU G.694.2 standards compliant • High channel isolation • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

VS409 cwdm

ELEMENT management

Standards ITU-T G.694.2 # of I/O Channels 9 Common Output 1 Connector SC/PC Optical Wavelengths (nm) 1310, 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610 Channel Separation 20nm Insertion Loss 1.8dB max Link Loss w/mux/demux combo <3.0dB Return Loss ≥50dB Input Power 300mW max Polarization Dependent Loss ≤0.1dB Fiber Type Single mode

LED indicators VS409

DC power

Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Status

Model and serial number

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +5V Power Consumption <1W Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS409-CWDM

9-Channel CWDM optical multiplexer/ demultiplexer

network-electronics.com

| 27

VENTURA

1.1 Wavelength Division Multiplexing VS401SP

2-Channel Optical Splitter • Half power split — 50/50 • Environmentally stable • Low insertion loss, typically less than 3.6dB including split, connector and internal losses • Wide wavelength range covering all CWDM wavelengths • Directivity better than 50dB • Low polarization dependent loss • NEBS Level 3 compliant

Optical # of Inputs # of Outputs Connector Input Wavelength Range Insertion Loss Return Loss Output Power Thermal Stability Fiber Type

Physical and Environmental 1 2 SC/PC 1260nm–1620nm 3.6dB max on each output ≥–55dB 50/50 split ±0.1dB Single mode

DC power

element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Status

Ordering Options VS401SP

LED indicators VS401SP

Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +5V Power Consumption <1W Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Model and serial number

28 | network-electronics.com

2-Channel optical splitter

VENTURA

Wavelength Division Multiplexing

1.1

VS401SW

2-Channel Optical Switch • 2 X 1 optical path protection • Directional light on each input • Each path is fully bi-directional • Accepts all CWDM wavelengths • Revertive and non-revertive switching modes • Fast 10ms switching time • Front panel and remote netman manual switch • Low loss <2dB • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

optical

element management

# of Input Channels 2 (primary and secondary) # of Outputs 1 Connector SC/PC Insertion Loss 2dB max Switch Channel Crosstalk >55dB Switching Time <10ms Switch Triggered at –35dBm Switch Stimulation Automatic (at -35dBm) Manual (Front panel push button) Element management (forced) Switch Mode Settings Revertive Non-revertive Wavelength Range 1260nm–1620nm Fiber Type Single mode

LED indicators VS401SW

Primary input present Secondary input present Primary input selected Secondary input selected

Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms Loss of primary input Loss of secondary input Status Primary input (present/not present) Secondary input (present/not present) Selected input (primary/secondary) Selected mode (revertive/non-revertive) Model and serial number Controls Input select (primary/secondary) Mode select (revertive/non-revertive)

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +5V Power Consumption <1W Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS401SW

2-Channel optical switch

network-electronics.com

| 29

VENTURA

1.1 Converters and Embedders VS312

SDI/ASI Audio Embedder/De-Embedder • SDI, SDTI and DVB-ASI compatible with automatic input signal detection • Removes timing and alignment jitter from the SDI signal • Passes SMPTE-259M 270Mbps SDI pathological sequence test • Embeds up to four channels of analog audio or two channels of AES digital audio, or mix of both • Asynchronous or synchronous 48Khz audio with 20-bit audio resolution • Available in 600 ohm or Hi-Z • Default SDI keep-alive signal • Loss of video, EDH, SDI video present, loss of input, loss of audio LEDs • Inband element management • Automatic cable equalization up to 300m for Belden 8281 • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet VS312-E SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH1 (L1) Analog Audio

270Mbps

270Mbps Network

270Mbps

270Mbps

SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH1 (L1)

CH2 (R1)

CH2 (R1)

CH3 (L2)

CH3 (L2)

CH4 (R2)

CH4 (R2)

Digital Audio

AES1

AES1

AES2

AES2

Digital video Standards

SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of Inputs 1 # of Outputs 2 Connector BNC Impedance 75 ohm Data Rate 270Mbps Equalization Up to 300m w/Belden 8281

digital Audio Standards AES/EBU (SMPTE-272M) # of Inputs 2 (VS312-E) # of Outputs 2 (VS312-D) Connector BNC (unbalanced) 3-pin terminal (balanced) Impedance 75 ohm (unbalanced) 110 ohm (balanced) Sampling Rates 48 KHz, 44.1 KHz and 32 KHz Output Rate 48 KHz Resolution 20-bit Format Synchronous or asynchronous Output Level 1 Vp-p (unbalanced) 2 Vp-p min (balanced)

analog audio Standards Exceeds RS250C short haul specs # of Inputs 4 (L1,R1,L2,R2) (1 group) (VS312-E) # of Outputs 4 (1 group) (VS312-D) Connector 3-pin terminal Impedance Hi-Z or 600 ohm (balanced) Sampling Rate 48 KHz Quantization 20-bit SNR Unweighted -90dBFS Frequency Response 0.5dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, @ 0dBFS) IMD <0.05% SMPTE @ +2dBu Crosstalk Between Ch. 95dB Input/Output Level 0dBFS = +24dBu (Hi-Z) 0dBFS = +18dBu (600 ohm)

30 | network-electronics.com

VS312-D

Analog Audio

Digital Audio

LED indicators VS312-E VS312-D Error detection handling Error detection handling Loss of input Loss of input Loss of video Loss of video SDI input present SDI input present ASI input present ASI input present Loss of audio 1 Loss of AES 1–2 Loss of audio 2 Loss of analog 1–4 Loss of audio 1 Loss of audio 2

ELEMENT management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms Loss of input Loss of video EDH errors Loss of audio VS312-E uplink transmitter alarms (VS312-D) Status ASI input detected SDI input detected Incoming embedded audio detected Model and serial number Controls Force to ASI mode enable/disabled Select pre-embedded or local embedding mode (VS312-E) SDI generator Remove or retain audio from SDI output (VS312-D) ID setting for the VS312 (0-65535)

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 10W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS312-E VS312-D

SDI audio embeddder SDI audio de-embedder

VENTURA

Converters and Embedders

1.1

VS501

SDI/ASI 270Mbps Audio Embedder/De-Embedder and Fiber Optic Transport • SDI, SDTI and DVB-ASI compatible • Removes timing and alignment jitter from the SDI signal • Passes SMPTE-259M 270Mbps SDI pathological sequence test • Embeds up to four channels of analog audio or two channels of AES digital audio, or mix of both • Asynchronous or synchronous 48Khz audio with 20-bit audio resolution • Default SDI keep-alive signal • AES audio present, analog audio present, SDI video present, ASI video present, laser fail, DC power, EDH, loss of input and loss of audio LEDs • Inband element management • Automatic cable equalization up to 300m for Belden 8281 • Small formfactor pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

VS501-EO

SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9)

1310/1550/CWDM

SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of Inputs 1 # of Outputs 2 Connector BNC Impedance 75 ohm Data Rate 270Mbps Equalization Up to 300m w/Belden 8281

digital Audio Standards AES/EBU (SMPTE-272M) # of Inputs 2 (VS501-EO) # of Outputs 2 (VS501-OE) Connector BNC (unbalanced) 3-pin terminal (balanced) Note: see VS312 data sheet for more detailed specifications

analog audio Standards exceeds RS250C short haul specs # of Inputs 4(VS501-EO) # of Outputs 4 (VS501-OE) Connector 3-pin terminal Note: see VS312 data sheet for more detailed specifications

Optical transmitter 1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min Single mode

optical receiver # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type

270Mbps

270Mbps

SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH1 (L1) CH2 (R1)

CH3 (L2)

CH3 (L2)

CH4 (R2)

CH4 (R2)

AES1

AES1

AES2

AES2

Analog Audio

Digital Audio

LED indicators

Standards

# of Outputs Connector Laser Type Laser Wavelengths Output Power Level Fiber Type

270Mbps Network

CH2 (R1)

Digital Audio

Digital video

VS501-OE 270Mbps

270Mbps

CH1 (L1) Analog Audio

PIN Rcv’r

270Mbps

1 SC/PC PINFET pigtail 1260nm–1620nm ≤-34dBm 0dBm Single mode

VS501-EO Note: same as the VS312

VS501-OE

ELEMENT management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Note: same as the VS312 plus the following: Alarms Laser transmitter failure (VS501-EO) Optical low light (VS501-OE) VS501-EO uplink transmitter alarms (VS501-OE) Status VS501-EO uplink transmitter status (VS501-OE) Model and serial number Laser wavelength Laser power SFP receiver installed Optical receiver installed Controls Laser transmitter enable/disable (VS501-EO) Electrical/optical receiver input mode (VS501-OE) SDI pattern enable ID setting for the VS501 (0-65535)

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 7W typical Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS501-EO VS501-OE

Transmitter card PINFET receiver

SFP Options SFP-TV-1310-SF SFP-TV-1490-C SFP-TV-1530-C SFP-TV-1550-SD SFP-TV-1610-C

SFP-TV-1470-C SFP-TV-1510-C SFP-TV-1550-C SFP-TV-1590-C SFP-RV-PIN

network-electronics.com

| 31

VENTURA

1.1 Converters and Embedders VS551

Composite Analog Video and Audio to SDTI 270Mbps w/Fiber Optic Transport • Converts NTSC/PAL analog video to SDTI for transport over a 270Mbps network Analog Video • Embeds up to four channels of analog audio (NTSC/PAL) • 12-bit video quantization, 20-bit audio quantization • Unintrusive audio monitoring and level adjustment CH1 (L1) • Composite test pattern generator Analog CH2 (R1) • Loss of input, loss of video, EDH, loss of audio LEDs Audio CH3 (L2) CH4 (R2) • Optical (optional) and electrical 270Mbps outputs • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

Analog video

Digital video Standards SDTI (SMPTE-305M) # of Inputs 1 (VS551-DAC) # of Outputs 1 (VS551-ADC) Connector BNC Impedance 75 ohm Data Rate Up to 270Mbps Equalization Up to 300m w/Belden 8281

analog audio Standards Exceeds RS250C short haul specs # of Inputs 4 (VS551-ADC) # of Outputs 4 (VS551-DAC) Connector 3-pin terminal Impedance Hi-Z or 600 ohm (balanced) Sampling Rate 48 KHz Quantization 20-bit SNR Unweighted -90dBFS Frequency Response 0.5dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, @ 0dBFS) IMD <0.05% SMPTE @ +2dBu Crosstalk Between Ch. 95dB Input/Output Level 0dBFS = +24dBu (Hi-Z) 0dBFS = +18dBu (600 ohm)

Optical transmitter (optional)

Fiber Type

VS551-DAC Analog Video (NTSC/PAL)

1310/1550/CWDM

270Mbps SDTI (SMPTE-305M)

270Mbps Network

270Mbps SDTI (SMPTE-305M)

CH1 (L1) CH2 (R1) CH3 (L2) CH4 (R2)

optical receiver (optional)

Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of Inputs 1 (VS551-ADC) # of Outputs 1 (VS551-DAC) Monitors 1 front panel Connector BNC Impedance 75 ohm Quantization 12-bit Equalization Up to 300m w/Belden 8281 SNR >70dB Differential Gain <2% (NTSC), <1% (PAL) Differential Phase <0.7° (NTSC), <0.5° (PAL)

# of Outputs Connector Laser Type Laser Wavelengths Output Power Level

VS551-ADC

1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min (1310 and 1550) -0.5dBm min (CWDM) Single mode

# of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type

LED indicators VS551-ADC VS551-DAC Loss of audio for each ch. Loss of audio for each channel Loss of video (VID) Loss of video (VID) EDH EDH DC power Loss of input (LOI) Loss of frame (LOF)

DC power

Element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms Loss of audio 1-4 Loss of video Status SFP present SFP transmitter wavelength SFP power level Controls Laser transmitter enable/disable

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 9W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS551-ADC-SFP Analog to digital converter w/audio embedder (SFP cage included) SFP Sold Separately SFP-TV-1310-SF SFP-TV-1490-C SFP-TV-1530-C SFP-TV-1550-SD SFP-TV-1610-C VS551-DAC-SFP SFP Sold Separately SFP-RV-PIN

32 | network-electronics.com | network-electronics.com

1 SC/PC PINFET pigtail 1260nm–1620nm ≤-34dBm 0dBm Single mode

SFP-TV-1470-C SFP-TV-1510-C SFP-TV-1550-C SFP-TV-1590-C Digital to analog converter w/audio deembedder (SFP cage included)

Analog Audio

VENTURA

Converters and Embedders

1.1

VS551-D-ADC-SFP

Transmitter – Universal Analog & Digital Video/Audio Adapter for Fiber Optic Transport • Automatically detects video input format • Converts NTSC/PAL/PAL-M Video and ATSC, SD-SDI, HD-SDI and DVB-ASI inputs to SDTI/SDI and optical output for transport over 270Mbps network • Handles 525/625 SD-SDI and 1.4835/1.485Gbps HD-SDI • Composite test pattern generator • Converts up to four channels of analog audio to AES • Dolby E – compatible • Non-intrusive audio monitoring and level adjustment • Embeds AES converted from analog audio or direct-fed AES into SDTI, SD-SDI or HD-SDI • Warning LEDs for loss of video, loss of audio, CRC/EDH • Small Form-factor Pluggable (SFP) optics available in 1310, 1550, and any ITU CWDM or DWDM wavelength • Engineered to meet NEBS Level 3 requirements • Compatible with FCS183 AEMS and EMS element managers

Analog video Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of inputs 1 Monitors 1 front panel Connector BNC Impedance 75 ohm Quantization 12-bit Equalization Up to 300m w/Belden 8281 SNR >70dB Differential gain <2% (NTSC), <1% (PAL) Differential phase <0.7° (NTSC), <0.5° (PAL)

DIGITAL audio Standards AES unbalanced (SMPTE-276M) AES balanced (AES3-1992) Dolby E # of inputs 2 rear balanced or unbalanced Connector Phoenix 3-pin balanced, 110 ohm BNC 75 ohm Signal level Unbalanced 1.2 Vp-p Balanced 1 to 7 Vp-p Resolution Supports up to 24 bits Sample rates 32kHz, 44kHz, 48kHz sample rates converted to 48kHz

optical TRANSMITTER Digital video Standards

SDTI (SMPTE-305M), SDI (SMPTE-259M), HD-SDI (SMPTE-292M), DVB-ASI (EN50083-9), ATSC (SMPTE-310M) # of inputs 1 # of outputs 2 electrical, 1 optical Monitors 1 front panel Connector BNC Impedance 75 ohm Data rate 19.4Mbps, 270Mbps, 1.4835Gbps, 1.485Gbps Equalization Up to 150m at 1.5Gbps with Belden 1694A Up to 300m at 270Mbps with Belden 8281 Jitter Exceeds SMPTE standard Return loss Exceeds SMPTE standard

analog audio Standards Exceeds RS250C short haul specs # of inputs 4 Connector 3-pin terminal Impedance Hi-Z or 600 ohm (balanced) Sampling rate 48 KHz Quantization 20-bit SNR unweighted -90 dBFS Frequency response 0.5 dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, @ 0 dBFS) IMD <0.05% SMPTE @ +2 dBu Crosstalk between channels 95 dB Input/output level 0 dBFS = +24dBu (Hi-Z) 0 dBFS = +18dBu (600 ohms)

# of outputs Connector Laser type Laser wavelengths Output power level Fiber type

1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min (1310 & 1550) -0.5dBm min (CWDM) Single mode

LED indicators Video mode HD/SD/ASI Loss of input CRC/EDH for HD/SD Audio mode analog/AES Loss of audio Analog 1, 2, 3, 4 AES 1, 2

element management Compatible with the FCS183 comprehensive element management system that features SNMP and Web browser Interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura Series chassis Voltage +3.3V, +5V, +12V, -12V Power consumption 9W max Operating temperature 0 ˚C to 50˚C chassis ambient Storage temperature –40 ˚C to 85 ˚C ambient

Ordering Options VS551-D-ADC-SFP Analog to digital converter with audio embedder (SFP cage Included, SFP sold separately) For optical interface options, see Ventura SFP Index data sheet.

network-electronics.com

| 33

VENTURA

1.1 Converters and Embedders VS551-D-DAC-SFP

Receiver – Universal Analog and Digital Video and Audio Adapter for Fiber Optic Transport • Receives all SD-SDI, HD-SDI, ASI and ATSC optically and electrically • De-embeds four channels of audio from SD-SDI and HD-SDI and provides AES and analog outputs • Dolby E – compatible • Converts SDTI to NTSC/PAL/PAL-M • Non-intrusive analog audio monitoring and level adjustment • Loss of input, loss of video, EDH/CRC, loss of audio LEDs • Remote loss of video and loss of audio LEDs • Small Formfactor Pluggable (SFP) optics with APD receiver for optimum sensitivity • Engineered to meet NEBS Level 3 requirements • Compatible with the FCS183 comprehensive element management system that provides remote status, alarms and configurations via SNMP and Ethernet

Analog video

DIGITAL audio

Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of outputs 2 Monitors 1 front panel Connector BNC Impedance 75 ohm Quantization 12-bit Equalization Up to 300m w/Belden 8281 SNR >70dB Differential gain <2% (NTSC), <1% (PAL) Differential phase <0.7° (NTSC), <0.5° (PAL)

Digital video Standards

# of inputs # of outputs Monitors

SDTI (SMPTE-305M) SDI (SMPTE-259M) HD-SDI (SMPTE-292M) DVB-ASI (EN50083-9) ATSC (SMPTE-310M) 1 optical (see optical spec), 1 electrical 2 1 front panel

Connector BNC Impedance 75 ohm Data rate 19.4Mbps, 270Mbps, 1.4835Gbps, 1.485Gbps Equalization Up to 150m at 1.5Gbps with Belden 1694A Up to 300m at 270Mbps with Belden 8281 Jitter Exceeds SMPTE standard Return loss Exceeds SMPTE standard

analog audio Standards Exceeds RS250C short haul specs # of outputs 4 Connector 3-pin terminal Impedance Hi-Z or 600 ohm (balanced) Sampling rate 48KHz Quantization 20-bit SNR unweighted -90dBFS Frequency response 0.5dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, at 0dBFS) IMD <0.05% SMPTE at +2 dBu Crosstalk between channels 95dB Input/output level 0dBFS = +24dBu (Hi-Z) 0dBFS = +18dBu (600 ohms)

34 | network-electronics.com

Standards AES unbalanced (SMPTE-276M) AES balanced (AES3-1992) Dolby E # of inputs 2 rear balanced or unbalanced Connector Phoenix 3-pin balanced, 110 ohm BNC 75 ohm, unbalanced Signal level Unbalanced 1.2Vp-p Balanced 1 to 7Vp-p Resolution Supports up to 24 bits

optical RECEIVER # of inputs Connector Receiver type Input wavelengths Sensitivity Max input power Fiber type

1 SC/PC SFP - APD 1260nm - 1620nm ≤-34dBm –8dBm (+7dBm with 15dB attenuator) Single mode

LED indicators Video Mode HD/SD/ASI Loss of input (local and remote) CRC/EDH for HD/SD Audio mode analog/AES Loss of audio Analog 1, 2, 3, 4 AES 1, 2 (local and remote)

element management Compatible with the FCS183 Comprehensive Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura Series Chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 9W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient

Ordering Options VS551-D-DAC-SFP Universal analog and digital video and audio fiber receiver

VENTURA

Converters and Embedders

1.1

VS601

Composite Analog Video to SDTI 270Mbps Converter • Converts NTSC/PAL analog video to SDTI for transport over a 270Mbps network • Exceeds RS250C short haul specifications • 12-bit quantization • Analog loop thru and 75 ohm termination switch • Front panel monitor port with EQ and gain adjustment • Default SDTI keep-alive signal • Loss of input and loss of video LEDs • Automatic cable equalization up to 300m for Belden 8281 • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

Analog Video (NTSC/PAL)

VS601-ADC

270Mbps SDTI (SMPTE-305M)

Analog video Standards Exceeds RS250C short haul spec Formats NTSC (525 lines) PAL (625 lines) # of Inputs 1 (VS601-ADC) # of Outputs 1 (VS601-ADC) 2 (VS601-DAC) Connector BNC Impedance 75 ohm Quantization 12-bit Equalization Up to 130m w/Belden 8281 SNR >70dB Differential Gain <2% (NTSC) <1% (PAL) Differential Phase <0.7° (NTSC) <0.5° (PAL)

Digital video Standards SDTI (SMPTE-305M) # of Inputs 1 (VS601-DAC) # of Outputs 2 (VS601-ADC) Connector BNC Impedance 75 ohm Data Rate 270Mbps Equalization Up to 300m w/Belden 8281

270Mbps Network

270Mbps SDTI (SMPTE-305M)

VS601-DAC

Analog Video (NTSC/PAL)

element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms Loss of video Loss of input (VS601-DAC) Status 75 ohm termination ON/OFF (VS601-ADC) Model and serial number

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +5V, +12V, -12V Power Consumption 7W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS601-ADC Composite analog video to SDTI converter VS601-DAC SDTI to composite analog video converter

LED indicators VS601-ADC VS601-DAC Loss of video Loss of video Loss of input

network-electronics.com

| 35

VENTURA

1.1 Converters and Embedders VS621

Analog to SDTI Video/Data Converter • Emulates the functions of the PCO5000 fiber link • Accommodates both video and data inputs • Converts composite video signal or wideband 12MHz analog bandwidth into a SMPTE 305M SDTI stream • More than 30dB optical link budget; low noise, high linearity conversion • LED indicators and external alarm contacts for video, data and optics • Balanced and unbalanced inputs and outputs • Front panel buffered monitor outputs • Front panel level (or gain) and cable equalization adjustments • 3Vpp/50 ohm version available • NEBS Level 3 compliant • SFP optics supporting all standard and CWDM applications

General

SDI Electrical interface parameters

Input signal types No. of channels/chassis Wideband mode spec.

NTSC, wideband 12 MHz analog passband 10 NASA: 79K33043 Specification of Wideband Fiber Optic Terminal Equipment Video mode specifications RS-250C Short Haul (video mode) Framing SMPTE 305M / SMPTE 259M

VS621-ADC Input interface Input levels Input impedance Return loss Common mode rejection Cable equalizer max

1 Vpp*, nominal ± 3dB (adjustable) 75 ohm* unbalanced (loop-through) or 124 ohm balanced (user-selectable) >40dB, 0–5 MHz >30dB, 0–10 MHz >70dB at 60Hz 130m, up to 12MHz (Belden 8281)

Equalization frequency response error ± 0.1dB perdB of cable loss *Configured for 3Vpp/50 ohm as VS-3V-PCO5000TX

VS621-DAC output interface Output levels Output impedance Rear panel Front panel

1 Vpp*, nominal ± 3dB (adjustable) Dual 75 ohm* unbalanced or 124 ohm balanced (user-selectable) 75 ohm unbalanced, flat, pre-equalized monitor port >40dB, 0–5 MHz >60dB, 0–5 MHz 130m, up to 12MHz

Return loss Module-to-Module isolation Cable equalizer max. Ith Equalization frequency response error ± 0.1dB perdB of cable loss *Configured for 3Vpp/50 ohm as VS-3V-PCO5000RX

Optical interface parameters # of Outputs # of Inputs Connector Laser Type Laser Wavelength Output Power Level–ADC Sensitivity–DAC Fiber Type

1 (VS621-ADC) 1 (VS621-DAC) SC/PC SFP 1310nm, 1550nm, CWDM, DWDM (please contact us for DWDM optics) -0.5dBm min -34dBm Single mode

System frequency response Video Mode Analog/Digital Mode

± 0.15dB, 10Hz–5MHz ± 0.35dB, 10Hz–8MHz ± 0/-3dB, 8MHz–12MHz

36 | network-electronics.com

Physical Interface SMPTE 259M Format SMPTE 305M Coax Drive Up to 300m (Belden 8281) Cable EQ Up to 300m (Belden 8281)

General Video Performance Specifications Gain Inequality Delay Inequality Intermodulation Chroma non-linear gain distortion Chroma non-linear phase distortion Luminance non-linearity Differential Gain Differential Phase Transient non-linearity Dynamic Gain of Picture Signal Signal to Low Frequency Noise pp Luminance Signal-to-weighted RMS Noise Signal-to-Periodic Noise Signal-to-Impulse Noise

± 1 IRE ± 10ns <1% for 50% APL <0.5% for 50% APL <0.5° for 50% APL <2% <1% <0.5° <1% <1% >53dB

>68dB >67dB >65dB

Analog/Data Signal distortions Total harmonic distortion Signal-to-noise ratio Peak-to-peak jitter

Overshoot Bit Error Rate

>40dB below 1 Vpp sinewave >50dB at -27dBm receiver optical power, 1 Vpp signal to 12MHz band-limited noise <5% up to 4Mbps, tested with 1 Vpp NRZ signal and 215 -1 pseudo-random bit sequence <10% <1 x 10-9, 1kbps to 4Mbps

PHYSICAL AND ENVIRONMENTAL Temperature range Power requirements

0-50 °C ambient <7W

Ordering Options VS621-PCO5000TX Analog to digital VS621-PCO5000RX Digital to analog VS621-3V-PCO5000TX Analog to digital (3Vpp/50 ohm) VS621-3V-PCO5000RX Digital to analog (3Vpp/50 ohm)

VENTURA

Converters and Embedders

1.1

VS651

Composite Analog Video to Component SDI 270Mbps Converter • Converts analog composite video to digital component SDI • 10-bit processing for optimum linearity and SNR • Comprehensive VBI handling • Passes SMPTE-259M 270Mbps SDI pathological sequence test • Meets TV-1 service specifications • Exceeds RS250C short haul specifications • Proprietary selectable comb/bandsplit filtering for top quality dynamic performance • Automatic cable equalization up to 300m for Belden 8281 • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

Analog Video (NTSC/PAL)

VS651-ADC

270Mbps SDI (SMPTE-259M) SDI (SMPTE-295M)

270Mbps Network

SDI (SMPTE-259M) 270Mbps

Analog Video (NTSC/PAL) VS651-DAC

Analog Video (NTSC/PAL)

Reference

Analog video Standards Exceeds RS250C short haul spec Formats NTSC (525 lines) PAL (625 lines) # of Inputs 1 (VS651-ADC) 1 reference video (VS651-ADC) # of Outputs 2 (VS651-DAC) Connector BNC Impedance 75 ohm Quantization 10-bit or 8-bit Equalization Up to 150m w/Belden 8281 SNR >70dB Differential Gain <2% (NTSC) <1% (PAL) Differential Phase <0.7° (NTSC) <0.5° (PAL)

Digital video Standards SDI (SMPTE-259M) # of Inputs 1 (VS651-DAC) # of Outputs 2 (VS651-ADC) Connector BNC Impedance 75 ohm Data Rate 270Mbps Equalization Up to 300m w/Belden 8281

element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms Loss of input (VS651-DAC) DC power alarm (VS651-DAC) Status Selected mode NTSC/PAL/AUTO (VS651-DAC) 270Mbps PAL detected/not detected (VS651-DAC) 270Mbps NTSC detected/not detected (VS651-DAC) Model and serial number (VS651-DAC)

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 7W max Operating Temperature 0˚ to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS651-ADC Composite analog video to component SDI digital converter VS651-DAC Component SDI digital to composite analog video converter

LED indicators VS651-ADC VS651-DAC 625/525 lines NTSC video 10bit/8bit PAL video Sync (analog timing reference) Loss of input Lock (composite Y input present) DC power +5V Configuration complete

network-electronics.com

| 37

VENTURA

1.1 Converters and Embedders VS661

Composite Analog Audio and Video to Component SDI 270Mbps Converter w/Fiber Optic Transport • Embeds up to four channels of analog audio • 20-bit audio quantization • Passes SMPTE-259M 270Mbps SDI pathological sequence test • Meets US telco TV-1 service specifications (GR-338-CORE) • Exceeds RS250C short haul specifications • Proprietary selectable comb/bandsplit filtering for top quality dynamic performance • Automatic cable equalization up to 300m for Belden 8281 • Front panel monitor and calibration adjustments • User-definable alarms based on priority • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 and any ITU CWDM or DWDM wavelengths • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

Analog video Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of inputs 1 (VS661-ADC) # of outputs 2 (VS661-DAC) Monitors 1 (VS661-ADC) Connector BNC Impedance 75 Ohm Quantization 10-bit Equalization Up to 150m w/Belden 8281 SNR >70dB Differential gain <2% (NTSC), <1% (PAL) Differential phase <0.7° (NTSC), <0.5° (PAL)

Digital video Standards SDI (SMPTE-259M) # of inputs 1 (VS661-DAC) # of outputs 2 (VS661-ADC) Connector BNC Impedance 75 Ohm Data rate 270Mbps Equalization Up to 300m w/Belden 8281

analog audio Standards Exceeds RS250C short haul specs # of inputs 4 (VS661-ADC) # of outputs 4 (VS661-DAC) Connector 3-pin terminal Impedance Hi-Z or 600 Ohm (balanced) Sampling rate 48 KHz Quantization 20-bit SNR unweighted –90 dBFS Frequency response 0.5 dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, @ 0 dBFS) IMD <0.05% SMPTE @ +2 dBu Crosstalk between channels 95 dB Input/output level 0 dBFS = +24dBu (Hi-Z) 0 dBFS = +18dBu (600 Ohm)

OPTICAL CHARACTERISTICS # of Outputs # of Inputs Connector Laser type Laser wavelength Output power level – ADC Sensitivity - DAC Fiber type

VS661-ADC

VS661-DAC

Analog Video (NTSC/PAL)

1 (VS661-ADC) 1 (VS661-DAC) SC/PC SFP 1310nm, 1550 nm, CWDM, DWDM (please contact us for DWDM optics) -0.5 dBm min -34dBm Single mode

38 | network-electronics.com

Analog Video (NTSC/PAL)

SDI Analog Audio

270Mbps Network

SDI

CH1 (L1)

CH1 (L1)

CH2 (R1)

CH2 (R1)

CH3 (L2)

CH3 (L2)

CH4 (R2)

CH4 (R2)

Analog Audio

LED indicators VS661 – ADC Minor alarm (MIN) LED (red) Loss of composite video input, loss of SDI video output, or loss of audio Major alarm (MAJ) LED (red) board failure or communication failure Input present (VID) LED (green) composite video input present Power OK (DC) LED (green) power supply ok Audio channel 1 (AUD1) LED (yellow) ON with alarm, normally OFF Audio channel 2 (AUD2) LED (yellow) ON with alarm, normally OFF Audio channel 3 (AUD3) LED (yellow) ON with alarm, normally OFF Audio channel 4 (AUD4) LED (yellow) ON with alarm, normally OFF VS661 – DAC Input present (SDI) LED (red) SDI video present Audio group (AUD) LED (yellow) Audio group present Power (+5V) LED (green) +5V DC power present Alarm (ALM) LED (yellow) flashes with alarm, normally OFF Set-up and alignment 10 character alphanumeric display

Element management Compatible with FCS183-AEMS that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

PHYSICAL AND ENVIRONMENTAL Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power consumption 7W max Operating temperature 0 ˚C to 50 ˚C chassis ambient Storage temperature –40 ˚C to 85 ˚C ambient Relative humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS661-ADC Composite analog audio and video to component SDI digital converter VS661-DAC Component SDI digital to composite analog audio and video converter. SFP optics sold separately

VENTURA

Converters and Embedders

1.1

VS905-ME-CO-FE*

MPEG 2 Encoder NTSC + Audio to ASI/100BaseT Network Interfaces • NTSC composite input and output • Two independent channels of analog audio or four AES/EBU** • Buffered front panel monitor for NTSC input • Video and audio gain and cable EQ adjustments • Supports 2 channels of locally embedded audio • 10/100 Base-T network interface • Video and audio test pattern generators for built-in automated testing of equipment and link • Full VBI support • 4:2:0 support with transport streams of up to 10Mbps • I, B, B, P GOP for 4:2:0 profile. Simple GOP structure configuration through element management GUI** • AC and DC power options with optional redundancy • Compatible with SMPTE 2022, FEC included • Compatible with FCS183-AEMS Advanced Element Management System * Scheduled availability Q3 2008 ** Planned versions for future release

VS905-ME-CO-FE*

MPEG Encoder/Network Interface

**

Operation The VS905-ME-CO-FE MPEG-2 encoder product is designed with the exacting needs of the telecom service provider in mind. The product addresses the fact that most service providers are operating in an environment where NTSC and analog audio are widely used. The VS905ME-CO-FE can be configured at any desired quality level with full MP at ML support. Ease-of-use features like built-in test generators and readily accessible equalization and gain adjustments provides the operator fast and easy ways to set up and configure the equipment in non-ideal environments. Also, by providing ASI and Ethernet network interfaces the service provider can use the equipment directly in most applications.

2

2

**

Element Management Compression Video Format MPEG-2 (ISO/IEC 13 818-2) Profile MP at ML GOP I, B, B, P Bit rate From 1Mbps to 10Mbps Delay <140ms Audio Format Bit rate

MPEG-1 Layer II (ISO/IEC 11172-3) From 64 to 384Kbps

Encoder Inputs – Video Analog System specifications Number of inputs Impedance Nominal level Bandwidth S/N Lum Wt. Cable Eq

NTSC (ITU R-BT 470.RS250-C) 1 75 Ohm 1Vpp >5MHz >62dB >100m

Other Vertical Blanking Interval (VBI) transport is fully supported by stripping the VBI lines at the transmit end, multiplexing them uncompressed for transport and re-inserting at the receive end into the reconstituted video signal.

An SDI pattern generator is also built into the encoder and can be switched into the processing chain ahead of the compression engine, thereby providing end-to-end quality testing of the entire compression, transport and decompression process.

LED Indicators Loss of audio 1 Loss of audio 2 Loss of video Loss of Ethernet activity Power supply

Alarms Loss of video Loss of audio 1 Loss of audio 2 Controls/Status Audio/video encoder parameters Transmission protocol/network settings Test pattern generator VBI configuration

Encoder Inputs – Audio Analog Number of inputs Up to 2 independent channels Connector type Phoenix 3-pin Impedance 600 Ohm or Hi-Z S/N (TX to RX) > 80dB rms, > 62dB Other An on-board tone generator is also present that can be enabled for link and audio processing verification.

Network Interfaces Encoder Formats ASI EN 50083-9 10/100BaseT UDP/RTP, Unicast and Multicast

Management and Control Physical and Environmental Power consumption <12 Watts per unit Operating temp 0 ˚C to 50 ˚C ambient Storage temp –40 ˚C to 85 ˚C C Relative humidity 5% to 85% Agency compliance Safety NEBS Level 3, UL, CSA, CE EMC FCC Part 15 Class A, CE EMC directive

Ordering Information VS905-ME-CO-FE – ENC Encoder

network-electronics.com

| 39

VENTURA

1.1 Converters and Embedders TV-C PLUS-ENC

MPEG 2 Encoder NTSC/PAL/SDI + Audio to ASI/DS3/100BaseT Network Interfaces

• NTSC/PAL composite or SDI inputs and outputs • Eight independent channels of analog audio or four AES/EBU • Video and audio gain and cable EQ adjust at all analog I/Os • Supports pre-embedded or locally embedded audio • DVB-ASI, DS3 and 10/100 Base-T interfaces • Video and audio test pattern generators for built-in automated testing of equipment and link • Full VBI support • 4:2:2 P at ML with transport stream of up to 50Mbps • 4:2:0 support with transport streams of up to 25Mbps • Simple GOP structure configuration through element management GUI • Intuitive front panel, easy-to-navigate LCD menu with push button controls • AC and DC power options with optional redundancy

40 | network-electronics.com

VENTURA

Converters and Embedders

1.1

TV-C PLUS-ENC

Operation

Encoder Inputs – Audio

The TV-C PLUS MPEG-2 encoder and decoder products are designed with the exacting needs of the telecom service provider in mind. The product addresses the fact that most service providers are operating in an environment where NTSC/PAL and analog audio and SDI and AES are all widely used, often by the same customer who is interconnecting digital and analog islands. The TV-C PLUS can be configured to seamlessly bridge these worlds at any desired quality level with full MP at ML and 4:2:2 P at ML support. Ease-of-use features like built-in test generators and readily accessible equalization and gain adjustments provides the operator fast and easy ways to set up and configure the equipment in non-ideal environments. Also, by providing ASI, Ethernet and DS3 network interfaces the service provider can directly use the equipment in most applications.

Compression/De-Compression Video Format MPEG-2 (ISO/IEC 13 818-2) Profile 422P at ML or MP at ML GOP Adjustable Bit rate From 1,5Mbps to 50Mbps Delay <140ms Audio Format Mode Bit rate

MPEG-1 Layer II (ISO/IEC 11172-3) Stereo, Joint Stereo, Mono, Dual Mono From 64 to 384Kbps

Encoder Inputs – Video Analog System specifications Number of inputs Impedance Nominal level Bandwidth S/N Lum Wt. Cable Eq

PAL/NTSC (ITU R-BT 470.RS250-C) 1 75 ohm 1Vpp >5MHz >68dB (Profile dependent) >100m

Digital Format Cable Eq

SDI 4:2:2 (625/625) (ITU-R 656) >250m Belden 8281

Other Vertical Blanking Interval (VBI) transport is fully supported by stripping the VBI lines at the transmit end, multiplexing them uncompressed for transport and re-inserting at the receive end into the reconstituted video signal.

An SDI pattern generator is also built into the encoder and can be switched in to the processing chain ahead of the compression engine thereby providing end-to-end quality testing of the entire compression, transport and decompression process.

Analog Number of inputs Up to 8 independent channels Connector type Phoenix 3-pin Impedance 600 ohm or Hi-Z S/N (TX to RX) > 80dB rms, > 62dB Digital System specification AES-3 Connector type Three, Phoenix Impedance 110 ohm, Balanced Sample frequency 32, 44.1, 48Khz Other Audio may also be carried pre-embedded in the SDI stream. If configured to do so, this audio will be de-embedded and processed by the encoder.

An on-board tone generator is also present that can be enabled for link and audio processing verification.

Network Interfaces Encoder/Decoder Formats ASI EN 50083-9 E3 G.751 DS-3 G.751, C-Bit Parity or M-Frame* 10/100BaseT UDP/RTP, Unicast and Multicast

Management and Control Both encoder and decoder can be configured via front panel push buttons and LCD display.

The main status, control and alarm interfaces are through an RS-232 port and an RJ-45 10 BaseT port on the rear panel of each unit.

Physical and Environmental The TV-C PLUS is fitted with both AC plus DC power supplies. Redundancy is enhanced through unique cross coupling of DC inputs and outputs when two or more units are present.

Power consumption <25 Watts per unit Operating temp 0 ˚C to 50 ˚C ambient Storage temp –40 ˚C to +85 ˚C Relative humidity 5% to 85% Agency compliance Safety UL, CSA, CE Low Voltage Directive EMC FCC Part 15 Class A, CE EMC Directive

Ordering Information VPG TV-C PLUS – ENC Encoder

network-electronics.com

| 41

VENTURA

1.1 Converters and Embedders TV-C PLUS-DEC

MPEG 2 Decoder

NTSC/PAL/SDI + Audio to ASI/DS3/100BaseT Network Interfaces

• NTSC/PAL Composite or SDI inputs and outputs • Eight independent channels of Analog audio or four AES/EBU • Video and audio gain and cable eq adjust at all analog I/O’s • Pre-embedded or locally embedded audio supported • DVB-ASI, DS3 and 10/100 Base-T interfaces • Video and audio test pattern generators for built-in automated testing of equipment and link • Full VBI support • 4:2:2 P at ML with transport stream of up to 50Mbps • 4:2:0 support with transport streams of up to 25Mbps • Simple, GOP structure configuration through element management GUI • Intuitive front panel easy to navigate LCD menu with push button controls • Simple front-panel display/menu/selection • AC and DC power options with optional redundancy

42 | network-electronics.com

VENTURA

Converters and Embedders

1.1

TV-C PLUS-DEC

Operation

Decode Outputs – Audio

The TV-C PLUS MPEG-2 encoder and decoder products are designed with the exacting needs of the telecom service provider in mind. The product addresses the fact that most service providers are operating in an environment where NTSC/PAL and analog audio and SDI and AES are all widely used, often by the same customer who is interconnecting digital and analog islands. The TV-C PLUS can be configured to seamlessly bridge these worlds at any desired quality level with full MP at ML and 4:2:2 P at ML support. Ease-of-use features like built-in test generators and readily accessible equalization and gain adjustments provides the operator fast and easy ways to set up and configure the equipment in non-ideal environments. Also, by providing ASI, Ethernet and DS3 network interfaces the service provider can directly use the equipment in most applications.

Compression/De-Compression Video Format Profile

MPEG-2 (ISO/IEC 13 818-2) 422P at ML or MP at ML

GOP Adjustable Bit rate From 1.5Mbps to 50Mbps Delay <140ms Audio Format Mode Bit rate

MPEG-1 Layer II (ISO/IEC 11172-3) Stereo, Joint Stereo, Mono, Dual Mono From 64 to 384Kbps

Decoder Outputs-Video Analog System specifications Number of inputs Impedance Nominal level Bandwidth S/N Lum Wt. Cable Eq

PAL/NTSC (ITU R-BT 470.RS250-C) 1 75 ohm 1Vpp >5MHz >68dB (Profile dependent) >100m

Digital Format

SDI 4:2:2 (625/625) (ITU-R 656)

Analog Number of outputs Up to 8 independent channels Connector type Phoenix 3-piin Impedance 600 ohm or Lo-Z S/N (TX to RX) > 80dB rms, > 62dB Digital System specification AES-3 Connector type Three, Phoenix Impedance 110 ohm, Balanced Sample frequency 32, 44.1, 48Khz

Network Interfaces Encoder/Decoder Formats ASI EN 50083-9 E3 G.751 DS-3 G.751, C-Bit Parity or M-Frame* 10/100BaseT UDP/RTP, Unicast and Multicast

Management and Control Both encoder and decoder can be configured via front panel push buttons and LCD display.

The main status, control and alarm interfaces are through an RS-232 port and an RJ-45 10 BaseT port on the rear panel of each unit.

Physical and Environmental The TV-C PLUS is fitted with both AC plus DC power supplies. Redundancy is enhanced through unique cross coupling of DC inputs and outputs when two or more units are present.

Power consumption <25 Watts per unit Operating temp 0 ˚C to 50 ˚C ambient Storage temp –40 ˚C to + 85 ˚C Relative humidity 5% to 85% Agency compliance Safety UL, CSA, CE Low Voltage Directive EMC FCC Part 15 Class A, CE EMC Directive

Ordering Information VPG TV-C PLUS – DEC

Decoder

network-electronics.com

| 43

VENTURA

1.1 Single Channel Fiber VS201

SDI/ASI/310M Fiber Optic Transport • SDI, SDTI, ATSC and ASI compatible • Automatic data rate selection • Passes SMPTE-259M 270Mbps SDI pathological test sequence • Loss of video, loss of input, laser failure and DC power LEDs • Automatic cable equalization up to 300m for Belden 8281 • Optical and electrical 270Mbps outputs • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

Digital video

element management

Standards

SDI (SMPTE-259M) SDTI (SMPTE-305M) 19.392Mbps (SMPTE-310M) DVB-ASI (EN50083-9) # of Inputs 1 (VS201-EO) # of Outputs 2 (VS201-OE) Connector BNC Impedance 75 ohm Data Rate Up to 270Mbps Equalization Up to 300m w/Belden 8281

Optical transmitter # of Outputs Connector Laser Type Laser Wavelengths Output Power Level Fiber Type

1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min Single mode

optical receiver # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type

1 SC/PC PINFET pigtail 1260nm–1620nm ≤-34dBm 0dBm Single mode

LED indicators VS201-EO VS201-OE Laser failure Loss of video Loss of video Loss of input Mute (laser disabled) Bypass DC power DC power

external alarms N/C relay contact outputs for major and minor alarm signals.

44 | network-electronics.com

Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms Loss of input Loss of video (VS201-OE) Laser transmitter failure (VS201-EO) Status Transmitter enabled/disabled (VS201-EO) SFP transmitter wavelength (VS201-EO) SFP transmitter output power (VS201-EO) SFP receiver input power (VS201-EO) Data rate (VS201-OE) Bypass enabled/disabled (VS201-OE) Model and serial number Controls Laser transmitter enable/disable (VS201-EO)

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V Power Consumption 3W typical Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS201-EO Transmitter card-SDI/ASI E/O VS201-OE Receiver card-SDI/ASI O/E with SFP-RV-PIN receiver card installed SFP Options SFP-TV-1310-SF SFP-TV-1550-SD SFP-TV-1470-C SFP-TV-1490-C SFP-TV-1510-C SFP-TV-1530-C SFP-TV-1550-C SFP-TV-1570-C SFP-TV-1590-C SFP-TV-1610-C

Video 270/1500Mbps, TX, Non-CWDM FP Video 270/1500Mbps, TX, Non-CWDM DFB Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX,CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM

VENTURA

Single Channel Fiber

1.1 VS231

SDI/ASI 270Mbps Fiber Optic Transport with Jitter Management • SDI, SDTI and DVB-ASI compatible with automatic input signal detection • Removes timing and alignment jitter from the SDI signal • Tolerates multiple cascades through a facility • Passes SMPTE-259M 270Mbps SDI pathological sequence test • Default SDI keep-alive signal • Loss of video, EDH, SDI video present, loss of input LEDs • Inband element management • Automatic cable equalization up to 300m for Belden 8281 • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

Digital video

Physical and Environmental

Standards

SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of Inputs 1 # of Outputs 2 Connector BNC Impedance 75 ohm Data Rate Up to 270Mbps Equalization Up to 300m w/Belden 8281

element management

Optical transmitter # of Outputs Connector Laser Type Laser Wavelengths Output Power Level Fiber Type

1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min Single mode

optical receiver # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type

Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 6W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

1 SC/PC PINFET pigtail 1260nm–1620nm ≤-34dBm 0dBm Single mode

LED indicators VS231-EO VS231-OE Laser failure Loss of video Loss of video Loss of input EDH errors detected EDH errors detected SDI video present SDI video present

Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms Loss of input Loss of video Video errors Laser transmitter failure (VS231-EO) Optical low light (VS231-OE) VS231-EO uplink transmitter alarms (VS231-OE) Status DVB-ASI detected SDI detected Default SDI output enabled/disabled Incoming embedded audio detected VS231-EO uplink transmitter status (VS231-OE) SFP wavelength SFP output power SFP receiver input power Model and serial number Controls ID setting for the VS231 (0-65535) Force to ASI mode enable/disable Default pattern Laser transmitter enable/disable (VS231-EO) Optical/electrical receiver input mode (VS231-OE)

Ordering Options VS231-EO VS231-OE

Transmitter card PINFET receiver

SFP Options SFP-TV-1310-SF SFP-TV-1490-C SFP-TV-1530-C SFP-TV-1550-SD SFP-TV-1610-C

SFP-TV-1470-C SFP-TV-1510-C SFP-TV-1550-C SFP-TV-1590-C SFP-RV-PIN

network-electronics.com

| 45

VENTURA

1.1 Single Channel Fiber VS231-OO

SDI/ASI 270Mbps Fiber Optic Regenerator with Jitter Management • SDI, SDTI and DVB-ASI compatible with automatic input signal detection • Removes timing and alignment jitter from the SDI signal • Tolerates multiple cascades through a facility • Passes SMPTE-259M 270Mbps SDI pathological sequence test • Default SDI keep-alive signal • Loss of video, EDH, SDI video present, loss of input LEDs • Inband element management • Automatic cable equalization up to 300m for Belden 8281 • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

Digital video

element management

Standards

SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of Inputs 1 # of Outputs 2 Connector BNC Impedance 75 ohm Data Rate Up to 270Mbps Equalization Up to 300m w/Belden 8281

Optical transmitter # of Outputs Connector Laser Type Laser Wavelengths Output Power Level Fiber Type

1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min Single mode

optical receiver # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type

1 SC/PC PINFET pigtail 1260nm–1620nm ≤-34dBm 0dBm Single mode

LED indicators Laser failure Loss of video Loss of input EDH errors detected SDI video present

46 | network-electronics.com

Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms Loss of input Loss of video Video errors Laser transmitter failure Optical low light Uplink transmitter alarms Status DVB-ASI detected SDI detected Default SDI output enabled/disabled SFP transmitter wavelength SFP transmitter output power SFP receiver input power Incoming embedded audio detected Uplink transmitter status Model and serial number Controls Force to ASI mode enable/disable Laser transmitter enable/disable Optical/electrical receiver input mode

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 6W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS231-OO

Optical regenerator

VENTURA

Single Channel Fiber

1.1 VS501

SDI/ASI 270Mbps Audio Embedder/De-Embedder and Fiber Optic Transport • SDI, SDTI and DVB-ASI compatible • Removes timing and alignment jitter from the SDI signal • Passes SMPTE-259M 270Mbps SDI pathological sequence test • Embeds up to four channels of analog audio or two channels of AES digital audio, or mix of both • Asynchronous or synchronous 48Khz audio with 20-bit audio resolution • Default SDI keep-alive signal • AES audio present, analog audio present, SDI video present, ASI video present, laser fail, DC power, EDH, loss of input and loss of audio LEDs • Inband element management • Automatic cable equalization up to 300m for Belden 8281 • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet VS501-EO SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH1 (L1) Analog Audio

VS501-OE 270Mbps

270Mbps

270Mbps

270Mbps Network

270Mbps

SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH1 (L1) CH2 (R1)

CH3 (L2)

CH3 (L2)

CH4 (R2)

CH4 (R2)

AES1

AES1

AES2

AES2

Digital video

Analog Audio

Digital Audio

LED indicators

Standards

SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of Inputs 1 # of Outputs 2 Connector BNC Impedance 75 ohm Data Rate 270Mbps Equalization Up to 300m w/Belden 8281

digital Audio Standards AES/EBU (SMPTE-272M) # of Inputs 2 (VS501-EO) # of Outputs 2 (VS501-OE) Connector BNC (unbalanced) 3-pin terminal (balanced) Note: see VS312 data sheet for more detailed specifications

analog audio Standards exceeds RS250C short haul specs # of Inputs 4(VS501-EO) # of Outputs 4 (VS501-OE) Connector 3-pin terminal Note: see VS312 data sheet for more detailed specifications

Optical transmitter 1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min Single mode

optical receiver # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type

PIN Rcv’r

CH2 (R1)

Digital Audio

# of Outputs Connector Laser Type Laser Wavelengths Output Power Level Fiber Type

1310/1550/CWDM

270Mbps

1 SC/PC PINFET pigtail 1260nm–1620nm ≤-34dBm 0dBm Single mode

VS501-EO Note: same as the VS312

VS501-OE

element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Note: same as the VS312 plus the following: Alarms Laser transmitter failure (VS501-EO) Optical low light (VS501-OE) VS501-EO uplink transmitter alarms (VS501-OE) Status VS501-EO uplink transmitter status (VS501-OE) Model and serial number Laser wavelength Laser power SFP receiver installed Optical receiver installed Controls Laser transmitter enable/disable (VS501-EO) Electrical/optical receiver input mode (VS501-OE) SDI pattern enable ID setting for the VS501 (0-65535)

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 7W typical Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS501-EO VS501-OE

Transmitter card PINFET receiver

SFP Options SFP-TV-1310-SF SFP-TV-1490-C SFP-TV-1530-C SFP-TV-1550-SD SFP-TV-1610-C

SFP-TV-1470-C SFP-TV-1510-C SFP-TV-1550-C SFP-TV-1590-C SFP-RV-PIN

network-electronics.com

| 47

VENTURA

1.1 Single Channel Fiber VS551

Composite Analog Video and Audio to SDTI 270Mbps w/Fiber Optic Transport • Converts NTSC/PAL analog video to SDTI for transport over a 270Mbps network Analog Video • Embeds up to four channels of analog audio (NTSC/PAL) • 12-bit video quantization, 20-bit audio quantization • Unintrusive audio monitoring and level adjustment CH1 (L1) • Composite test pattern generator Analog CH2 (R1) Audio CH3 (L2) • Loss of input, loss of video, EDH, loss of audio LEDs CH4 (R2) • Optical (optional) and electrical 270Mbps outputs • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

Analog video

VS551-DAC Analog Video (NTSC/PAL)

1310/1550/CWDM

270Mbps SDTI (SMPTE-305M)

270Mbps Network

270Mbps SDTI (SMPTE-305M)

CH1 (L1) CH2 (R1) CH3 (L2)

Analog Audio

CH4 (R2)

optical receiver (optional)

Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of Inputs 1 (VS551-ADC) # of Outputs 1 (VS551-DAC) Monitors 1 front panel Connector BNC Impedance 75 ohm Quantization 12-bit Equalization Up to 300m w/Belden 8281 SNR >70dB Differential Gain <2% (NTSC), <1% (PAL) Differential Phase <0.7° (NTSC), <0.5° (PAL)

Digital video Standards SDTI (SMPTE-305M) # of Inputs 1 (VS551-DAC) # of Outputs 1 (VS551-ADC) Connector BNC Impedance 75 ohm Data Rate Up to 270Mbps Equalization Up to 300m w/Belden 8281

analog audio Standards Exceeds RS250C short haul specs # of Inputs 4 (VS551-ADC) # of Outputs 4 (VS551-DAC) Connector 3-pin terminal Impedance Hi-Z or 600 ohm (balanced) Sampling Rate 48 KHz Quantization 20-bit SNR Unweighted -90dBFS Frequency Response 0.5dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, @ 0dBFS) IMD <0.05% SMPTE @ +2dBu Crosstalk Between Ch. 95dB Input/Output Level 0dBFS = +24dBu (Hi-Z) 0dBFS = +18dBu (600 ohm)

Optical transmitter (optional) # of Outputs Connector Laser Type Laser Wavelengths

1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM

Output Power Level

-0.5dBm min (1310 and 1550) -0.5dBm min (CWDM) Single mode

Fiber Type

VS551-ADC

# of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type

LED indicators VS551-ADC VS551-DAC Loss of audio for each ch. Loss of audio for each channel Loss of video (VID) Loss of video (VID) EDH EDH DC power Loss of input (LOI) Loss of frame (LOF)

DC power

element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms Loss of audio 1-4 Loss of video Status SFP present SFP transmitter wavelength SFP power level Controls Laser transmitter enable/disable

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 9W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS551-ADC-SFP Analog to digital converter w/audio embedder (SFP cage included) SFP Sold Separately SFP-TV-1310-SF SFP-TV-1490-C SFP-TV-1530-C SFP-TV-1550-SD SFP-TV-1610-C VS551-DAC-SFP SFP Sold Separately SFP-RV-PIN

48 | network-electronics.com

1 SC/PC PINFET pigtail 1260nm–1620nm ≤-34dBm 0dBm Single mode

SFP-TV-1470-C SFP-TV-1510-C SFP-TV-1550-C SFP-TV-1590-C Digital to analog converter w/audio deembedder (SFP cage included)

VENTURA

Single Channel Fiber

1.1

VS551-D-ADC-SFP

Transmitter – Universal Analog & Digital Video/Audio Adapter for Fiber Optic Transport • Automatically detects video input format • Converts NTSC/PAL/PAL-M Video and ATSC, SD-SDI, HD-SDI and DVB-ASI inputs to SDTI/SDI and optical output for transport over 270Mbps network • Handles 525/625 SD-SDI and 1.4835/1.485Gbps HD-SDI • Composite test pattern generator • Converts up to four channels of analog audio to AES • Dolby E – compatible • Non-intrusive audio monitoring and level adjustment • Embeds AES converted from analog audio or direct-fed AES into SDTI, SD-SDI or HD-SDI • Warning LEDs for loss of video, loss of audio, CRC/EDH • Small Form-factor Pluggable (SFP) optics available in 1310, 1550, and any ITU CWDM or DWDM wavelength • Engineered to meet NEBS Level 3 requirements • Compatible with FCS183 AEMS and EMS element managers

Analog video Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of inputs 1 Monitors 1 front panel Connector BNC Impedance 75 ohm Quantization 12-bit Equalization Up to 300m w/Belden 8281 SNR >70dB Differential gain <2% (NTSC), <1% (PAL) Differential phase <0.7° (NTSC), <0.5° (PAL)

DIGITAL audio Standards AES unbalanced (SMPTE-276M) AES balanced (AES3-1992) Dolby E # of inputs 2 rear balanced or unbalanced Connector Phoenix 3-pin balanced, 110 ohm BNC 75 ohm Signal level Unbalanced 1.2 Vp-p Balanced 1 to 7 Vp-p Resolution Supports up to 24 bits Sample rates 32kHz, 44kHz, 48kHz sample rates converted to 48kHz

optical TRANSMITTER Digital video Standards

SDTI (SMPTE-305M), SDI (SMPTE-259M), HD-SDI (SMPTE-292M), DVB-ASI (EN50083-9), ATSC (SMPTE-310M) # of inputs 1 # of outputs 2 electrical, 1 optical Monitors 1 front panel Connector BNC Impedance 75 ohm Data rate 19.4Mbps, 270Mbps, 1.4835Gbps, 1.485Gbps Equalization Up to 150m at 1.5Gbps with Belden 1694A Up to 300m at 270Mbps with Belden 8281 Jitter Exceeds SMPTE standard Return loss Exceeds SMPTE standard

analog audio Standards Exceeds RS250C short haul specs # of inputs 4 Connector 3-pin terminal Impedance Hi-Z or 600 ohm (balanced) Sampling rate 48 KHz Quantization 20-bit SNR unweighted -90 dBFS Frequency response 0.5 dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, @ 0 dBFS) IMD <0.05% SMPTE @ +2 dBu Crosstalk between channels 95 dB Input/output level 0 dBFS = +24dBu (Hi-Z) 0 dBFS = +18dBu (600 ohms)

# of outputs Connector Laser type Laser wavelengths Output power level Fiber type

1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min (1310 & 1550) -0.5dBm min (CWDM) Single mode

LED indicators Video mode HD/SD/ASI Loss of input CRC/EDH for HD/SD Audio mode analog/AES Loss of audio Analog 1, 2, 3, 4 AES 1, 2

element management Compatible with the FCS183 comprehensive element management system that features SNMP and Web browser Interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura Series chassis Voltage +3.3V, +5V, +12V, -12V Power consumption 9W max Operating temperature 0 ˚C to 50˚C chassis ambient Storage temperature –40 ˚C to 85 ˚C ambient

Ordering Options VS551-D-ADC-SFP Analog to digital converter with audio embedder (SFP cage Included, SFP sold separately) For optical interface options, see Ventura SFP Index data sheet.

network-electronics.com

| 49

VENTURA

1.1 Single Channel Fiber VS551-D-DAC-SFP

Receiver – Universal Analog and Digital Video and Audio Adapter for Fiber Optic Transport • Receives all SD-SDI, HD-SDI, ASI and ATSC optically and electrically • De-embeds four channels of audio from SD-SDI and HD-SDI and provides AES and analog outputs • Dolby E – compatible • Converts SDTI to NTSC/PAL/PAL-M • Non-intrusive analog audio monitoring and level adjustment • Loss of input, loss of video, EDH/CRC, loss of audio LEDs • Remote loss of video and loss of audio LEDs • Small Formfactor Pluggable (SFP) optics with APD receiver for optimum sensitivity • Engineered to meet NEBS Level 3 requirements • Compatible with the FCS183 comprehensive element management system that provides remote status, alarms and configurations via SNMP and Ethernet

Analog video Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of outputs 2 Monitors 1 front panel Connector BNC Impedance 75 ohm Quantization 12-bit Equalization Up to 300m w/Belden 8281 SNR >70dB Differential gain <2% (NTSC), <1% (PAL) Differential phase <0.7° (NTSC), <0.5° (PAL)

Digital video Standards

SDTI (SMPTE-305M) SDI (SMPTE-259M) HD-SDI (SMPTE-292M) DVB-ASI (EN50083-9) ATSC (SMPTE-310M) # of inputs 1 optical (see optical spec), 1 electrical # of outputs 2 Monitors 1 front panel Connector BNC Impedance 75 ohm Data rate 19.4Mbps, 270Mbps, 1.4835Gbps, 1.485Gbps Equalization Up to 150m at 1.5Gbps with Belden 1694A Up to 300m at 270Mbps with Belden 8281 Jitter Exceeds SMPTE standard Return loss Exceeds SMPTE standard

analog audio Standards Exceeds RS250C short haul specs # of outputs 4 Connector 3-pin terminal Impedance Hi-Z or 600 ohm (balanced) Sampling rate 48KHz Quantization 20-bit SNR unweighted -90dBFS Frequency response 0.5dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, at 0dBFS) IMD <0.05% SMPTE at +2 dBu Crosstalk between channels 95dB Input/output level 0dBFS = +24dBu (Hi-Z) 0dBFS = +18dBu (600 ohms)

50 | network-electronics.com

DIGITAL audio Standards AES unbalanced (SMPTE-276M) AES balanced (AES3-1992) Dolby E # of inputs 2 rear balanced or unbalanced Connector Phoenix 3-pin balanced, 110 ohm BNC 75 ohm, unbalanced Signal level Unbalanced 1.2Vp-p Balanced 1 to 7Vp-p Resolution Supports up to 24 bits

optical RECEIVER # of inputs Connector Receiver type Input wavelengths Sensitivity Max input power Fiber type

1 SC/PC SFP - APD 1260nm - 1620nm ≤-34dBm –8dBm (+7dBm with 15dB attenuator) Single mode

LED indicators Video Mode HD/SD/ASI Loss of input (local and remote) CRC/EDH for HD/SD Audio mode analog/AES Loss of audio Analog 1, 2, 3, 4 AES 1, 2 (local and remote)

element management Compatible with the FCS183 Comprehensive Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura Series Chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 9W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient

Ordering Options VS551-D-DAC-SFP Universal analog and digital video and audio fiber receiver

VENTURA

Single Channel Fiber

1.1

VS591-SFP-SFP

Dual E4 Transposer • Configurable system for regenerating, transposing and transporting E4 signals • Designed to transport E4 139.264Mbps CMI encoded signals • Meets ITU-T recommendations for E4 • Two independent channels per card • Removes timing and alignment jitter from the SDI signals at the output • Jitter mask uses ITU-T recommendations G.823 • Loss of video, loss of optical input, laser failure LEDs • Automatic cable equalization better than 250m for Belden 8281 • Selectable test pattern generator for each channel • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 and any ITU CWDM or DWDM wavelengths VS591 Transposer Block Diagram • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

Digital video

element management

Standards ITU recommendations G.703 for E4 physical interface G.751 for E4 framing G.823 for jitter performance Electrical inputs 1 per channel Electrical outputs 2 (E4, reclocked and AC coupled) per channel Monitors 1 front panel BNC Connectors BNCs on rear connector panel Impedance 75 Ohm Data rate 139.264Mbps (278.528 M band) Equalization Better than 250m at 140Mbps for Belden 8281

Physical and Environmental

Optical transmitter # of outputs Connector Data rate Laser type Laser wavelengths Output power level Fiber type

1 per channel SC/PC 139.264Mbps SFP 1310nm, 1550nm, CWDM, DWDM –1dBm min Single mode

LED indicators DC power Loss of input Valid E4 present Channel present Laser failure CRC errors/AIS detected

Resides in a single slot of a VS101 or VS103 Ventura series chassis Power consumption 7W Operating temperature 0 ˚C to 50 ˚C chassis ambient Storage temperature –40 ˚C to 85 ˚C ambient Relative humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options

optical receiver # of inputs Connector Receiver type Input wavelengths Sensitivity Fiber type

Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms Loss of optical input Loss of video E4 errors detected Status Model and serial number Transmitter power level SFP laser transmitter wavelength SFP receiver installed Receiver power level Controls Laser transmitter enable/disable Pattern generator enable (PRBS with CRC check)

1 per channel SC/PC PIN 1260nm - 1620nm ≤–32dBm Single mode

VS591-SFP-SFP

Dual E4 transposer and protection switch

SFP Options SFP-TRV-1310-S SFP-TRV-1550-S SFP-TRV-1470-C SFP-TRV-1490-C SFP-TRV-1510-C SFP-TRV-1530-C SFP-TRV-1550-C SFP-TRV-1570-C SFP-TRV-1590-C SFP-TRV-1610-C SFP-RV-PIN

1310nm laser with PIN receiver 1550nm laser with PIN receiver 1470nm CWDM laser with PIN receiver 1490nm CWDM laser with PIN receiver 1510nm CWDM laser with PIN receiver 1530nm CWDM laser with PIN receiver 1550nm CWDM laser with PIN receiver 1570nm CWDM laser with PIN receiver 1590nm CWDM laser with PIN receiver 1610nm CWDM laser with PIN receiver PIN receiver

network-electronics.com

| 51

VENTURA

1.1 Single Channel Fiber VS621

Analog to SDTI Video/Data Converter • Emulates the functions of the PCO5000 fiber link • Accommodates both video and data inputs • Converts composite video signal or wideband 12MHz analog bandwidth into a SMPTE 305M SDTI stream • More than 30dB optical link budget; low noise, high linearity conversion • LED indicators and external alarm contacts for video, data and optics • Balanced and unbalanced inputs and outputs • Front panel buffered monitor outputs • Front panel level (or gain) and cable equalization adjustments • 3Vpp/50 ohm version available • NEBS Level 3 compliant • SFP optics supporting all standard and CWDM applications

General

SDI Electrical interface parameters

Input signal types No. of channels/chassis Wideband mode spec.

NTSC, wideband 12 MHz analog passband 10 NASA: 79K33043 Specification of Wideband Fiber Optic Terminal Equipment Video mode specifications RS-250C Short Haul (video mode) Framing SMPTE 305M / SMPTE 259M

VS621-ADC Input interface Input levels Input impedance Return loss Common mode rejection Cable equalizer max

1 Vpp*, nominal ± 3dB (adjustable) 75 ohm* unbalanced (loop-through) or 124 ohm balanced (user-selectable) >40dB, 0–5 MHz >30dB, 0–10 MHz >70dB at 60Hz 130m, up to 12MHz (Belden 8281)

Equalization frequency response error ± 0.1dB perdB of cable loss *Configured for 3Vpp/50 ohm as VS-3V-PCO5000TX

VS621-DAC output interface Output levels Output impedance Rear panel Front panel

1 Vpp*, nominal ± 3dB (adjustable) Dual 75 ohm* unbalanced or 124 ohm balanced (user-selectable) 75 ohm unbalanced, flat, pre-equalized monitor port >40dB, 0–5 MHz >60dB, 0–5 MHz 130m, up to 12MHz

Return loss Module-to-Module isolation Cable equalizer max. Ith Equalization frequency response error ± 0.1dB perdB of cable loss *Configured for 3Vpp/50 ohm as VS-3V-PCO5000RX

Optical interface parameters # of Outputs # of Inputs Connector Laser Type Laser Wavelength Output Power Level–ADC Sensitivity–DAC Fiber Type

1 (VS621-ADC) 1 (VS621-DAC) SC/PC SFP 1310nm, 1550nm, CWDM, DWDM (please contact us for DWDM optics) -0.5dBm min -34dBm Single mode

System frequency response Video Mode Analog/Digital Mode

± 0.15dB, 10Hz–5MHz ± 0.35dB, 10Hz–8MHz ± 0/-3dB, 8MHz–12MHz

52 | network-electronics.com

Physical Interface SMPTE 259M Format SMPTE 305M Coax Drive Up to 300m (Belden 8281) Cable EQ Up to 300m (Belden 8281)

General Video Performance Specifications Gain Inequality Delay Inequality Intermodulation Chroma non-linear gain distortion Chroma non-linear phase distortion Luminance non-linearity Differential Gain Differential Phase Transient non-linearity Dynamic Gain of Picture Signal Signal to Low Frequency Noise pp Luminance Signal-to-weighted RMS Noise Signal-to-Periodic Noise Signal-to-Impulse Noise

± 1 IRE ± 10ns <1% for 50% APL <0.5% for 50% APL <0.5° for 50% APL <2% <1% <0.5° <1% <1% >53dB

>68dB >67dB >65dB

Analog/Data Signal distortions Total harmonic distortion Signal-to-noise ratio Peak-to-peak jitter

Overshoot Bit Error Rate

>40dB below 1 Vpp sinewave >50dB at -27dBm receiver optical power, 1 Vpp signal to 12MHz band-limited noise <5% up to 4Mbps, tested with 1 Vpp NRZ signal and 215 -1 pseudo-random bit sequence <10% <1 x 10-9, 1kbps to 4Mbps

PHYSICAL AND ENVIRONMENTAL Temperature range Power requirements

0-50 °C ambient <7W

Ordering Options VS621-PCO5000TX Analog to digital VS621-PCO5000RX Digital to analog VS621-3V-PCO5000TX Analog to digital (3Vpp/50 ohm) VS621-3V-PCO5000RX Digital to analog (3Vpp/50 ohm)

VENTURA

Single Channel Fiber

1.1 VS661

Composite Analog Audio and Video to Component SDI 270Mbps Converter w/Fiber Optic Transport • Embeds up to four channels of analog audio • 20-bit audio quantization • Passes SMPTE-259M 270Mbps SDI pathological sequence test • Meets US telco TV-1 service specifications (GR-338-CORE) • Exceeds RS250C short haul specifications • Proprietary selectable comb/bandsplit filtering for top quality dynamic performance • Automatic cable equalization up to 300m for Belden 8281 • Front panel monitor and calibration adjustments • User-definable alarms based on priority • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 and any ITU CWDM or DWDM wavelengths • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

VS661-ADC

VS661-DAC

Analog Video (NTSC/PAL)

Analog Video (NTSC/PAL)

Analog video Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of inputs 1 (VS661-ADC) # of outputs 2 (VS661-DAC) Monitors 1 (VS661-ADC) Connector BNC Impedance 75 Ohm Quantization 10-bit Equalization Up to 150m w/Belden 8281 SNR >70dB Differential gain <2% (NTSC), <1% (PAL) Differential phase <0.7° (NTSC), <0.5° (PAL)

Digital video Standards SDI (SMPTE-259M) # of inputs 1 (VS661-DAC) # of outputs 2 (VS661-ADC) Connector BNC Impedance 75 Ohm Data rate 270Mbps Equalization Up to 300m w/Belden 8281

analog audio Standards Exceeds RS250C short haul specs # of inputs 4 (VS661-ADC) # of outputs 4 (VS661-DAC) Connector 3-pin terminal Impedance Hi-Z or 600 Ohm (balanced) Sampling rate 48 KHz Quantization 20-bit SNR unweighted –90 dBFS Frequency response 0.5 dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, @ 0 dBFS) IMD <0.05% SMPTE @ +2 dBu Crosstalk between channels 95 dB Input/output level 0 dBFS = +24dBu (Hi-Z) 0 dBFS = +18dBu (600 Ohm)

OPTICAL CHARACTERISTICS # of Outputs # of Inputs Connector Laser type Laser wavelength Output power level – ADC Sensitivity - DAC Fiber type

1 (VS661-ADC) 1 (VS661-DAC) SC/PC SFP 1310nm, 1550 nm, CWDM, DWDM (please contact us for DWDM optics) -0.5 dBm min -34dBm Single mode

SDI Analog Audio

270Mbps Network

SDI

CH1 (L1)

CH1 (L1)

CH2 (R1)

CH2 (R1)

CH3 (L2)

CH3 (L2)

CH4 (R2)

CH4 (R2)

Analog Audio

LED indicators VS661 – ADC Minor alarm (MIN) LED (red) Loss of composite video input, loss of SDI video output, or loss of audio Major alarm (MAJ) LED (red) board failure or communication failure Input present (VID) LED (green) composite video input present Power OK (DC) LED (green) power supply ok Audio channel 1 (AUD1) LED (yellow) ON with alarm, normally OFF Audio channel 2 (AUD2) LED (yellow) ON with alarm, normally OFF Audio channel 3 (AUD3) LED (yellow) ON with alarm, normally OFF Audio channel 4 (AUD4) LED (yellow) ON with alarm, normally OFF VS661 – DAC Input present (SDI) LED (red) SDI video present Audio group (AUD) LED (yellow) Audio group present Power (+5V) LED (green) +5V DC power present Alarm (ALM) LED (yellow) flashes with alarm, normally OFF Set-up and alignment 10 character alphanumeric display

Element management Compatible with FCS183-AEMS that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

PHYSICAL AND ENVIRONMENTAL Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power consumption 7W max Operating temperature 0 ˚C to 50 ˚C chassis ambient Storage temperature –40 ˚C to 85 ˚C ambient Relative humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS661-ADC Composite analog audio and video to component SDI digital converter VS661-DAC Component SDI digital to composite analog audio and video converter. SFP optics sold separately

network-electronics.com

| 53

VENTURA

1.1 High Definition VS251

HD-SDI, SDI, SDTI, ATSC and ASI Fiber Optic Transport • HD-SDI, SDI, SDTI , ATSC and ASI compatible • Automatic data rate selection • Passes SMPTE-259M 270Mbps SDI pathological test sequence • Loss of input, loss of video, laser failure and DC power LEDs • External major and minor relay contact closure alarms • Automatic cable equalization up to 120m with Belden 1694 • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

Digital video

element management

Standards

HDSDI (SMPTE-292M) SDI (SMPTE-259M) SDTI (SMPTE-305M) 19.392Mbps (SMPTE-310M) DVB-ASI (EN50083-9) # of Inputs 1 (VS251-EO) # of Outputs 2 (VS251-OE) Connector BNC Impedance 75 ohm Data Rate Up to 1.485 Gbps Equalization Up to 120m w/Belden 1694

Optical transmitter # of Outputs Connector Laser Type Laser Wavelengths Output Power Level Fiber Type

1 SC/PC Video SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min Single mode

optical receiver # of Inputs 1 Connector SC/PC Receiver Type APD Pigtail Input Wavelengths 1260nm–1620nm Sensitivity ≤–32dBm Max Input Power –8dBm Fiber Type Single mode

LED indicators VS251-EO VS251-OE Laser failure Loss of video Loss of video Loss of input Mute (laser disabled) Bypass DC power DC power

external alarms N/C relay contact outputs for major and minor alarm signals.

54 | network-electronics.com

Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms Loss of input Loss of video (VS251-OE) Laser transmitter failure (VS251-EO) Status Transmitter enabled/disabled (VS251-EO) SFP transmitter wavelength (VS251-EO) Data rate (VS251-OE) Bypass enabled/disabled (VS251-OE) SFP transmitter panel level SFP receiver panel Model and serial number Controls Laser transmitter enable/disable (VS251-EO)

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +5V, Power Consumption 3W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS251-1310-EO 1310nm laser VS251-1550-EO-S 1550nm laser VS251-1470-EO-C 1470nm CWDM laser VS251-1490-EO-C 1490nm CWDM laser VS251-1510-EO-C 1510nm CWDM laser VS251-1530-EO-C 1530nm CWDM laser VS251-1550-EO-C 1550nm CWDM laser VS251-1570-EO-C 1570nm CWDM laser VS251-1590-EO-C 1590nm CWDM laser VS251-1610-EO-C 1610nm CWDM laser VS251-OE APD receiver

VENTURA

High Definition

1.1 VS251-SFP

HD-SDI/SDI/SDTI/ASI/ATSC Fiber Optic TX/RX/TRX • 10Mbps to 1.5Gbps with jitter managed and non-jitter managed modes • Jitter management at 1.485Gbps HD, 1.4835Gbps HD and 270Mbps SDI/ SDTI/ASI, other rates supported in bypass mode • SFP optical interfaces supporting 1310nm, 1550nm, CWDM and DWDM • Minimum of 32dB optical dynamic range • SFP optics allow for optimum sparing; card is configurable as E-O, O-E and O-O repeater or wavelength shifter HD-SDI SDI/ASI

• Full CRC and EDH checking in HD-SDI and SDI modes • Built in HD-SDI test signal generator for remote network testing • Transports all HD and SD pathological patterns without additional scrambling at 1310/2550nm and CWDM • Additional scrambling for DWDM applications • SNMP and Web browser supported under Ventura AEMS management • NEBS Level 3 compliant Driver

Opt RX

HD-SDI

Laser

SDI/ASI

EDH/CRC Count HD-SDI SDI/ASI

Cab EQ

OR

Jitter Buffer

EDH/CRC Reset

Driver

HD-SDI SDI/ASI

LSB Dither HD-SDI Generator

Operation

Video Inputs HD-SDI SMPTE 292M SDI SMPTE 259M SDTI SMPTE 305M ATSC SMPTE 310M DVB-ASI EN50083-9

Jitter Performance Tight telecom level jitter tolerance specifications are maintained at all SD/HD inputs, while telecom level jitter transfer and jitter generation specifications are maintained at all SD/HD outputs.

Standard Measurement SD/ASI SMPTE RP184 SMPTE RP192/EG33 HD SMPTE RP184 SMPTE RP192

Electrical Input Number of Inputs Connector Type Return Loss Equalization

1 75 ohm BNC >15dB at 1.5Gbps >150m of Belden 1694 at 1.5Gbps

Electrical Outputs Number of Outputs Connector Type

2 Jitter managed 75 ohm BNC

Optical Input Number of Inputs Connector Type Wavelength Range Sensitivity Level Overload Level

HD-SDI SDI/ASI

Optical Output

This powerful HD/SD processor can be configured to provide electrical to optical, optical to electrical interfacing or as an optical to optical repeater.

The unique design provides full jitter management of all HD/SD rates.

1310/1550nm wavelengths as well as the sixteen CWDM wavelengths are supported using a comprehensive range of VPG-provided SFP optical modules. SFP DWDM is supported by enabling additional scrambling that allows SMPTE pathological patterns to pass error-free through all DWDM network elements. Element management provides detailed analysis of signal status, with CRC checking as well as optical interface monitoring and card status with Web browser and SNMP support. Control of all card functions is available through element management or on-board switches.

The card is ideal for difficult telco environments where both large losses and poor dispersion characteristics associated with legacy fiber plant are overcome with carrier class long-reach optics and jitter management techniques unique to VPG equipment designs.

Standards

Driver

1 SC/PC 1270 – 1610nm –32dBm (worst case) –8dBm (worst case)

Number of Outputs Connector Type Wavelengths Power Out

1 SC/PC 1310/1550nm, CWDM DWDM with LSB scrambling 0dBm min, +1dBm typical

Front Panel LED Indicators There is a row of nine LEDs comprehensively signaling the status and alarm conditions of the card. Depending on the configuration of the card the LEDs have different meanings. This is tabulated in the manual.

External Alarms N/C relay contact outputs for major and minor alarms. Each alarm and status condition can be programmed as a major or minor alarm or can be disabled if not in use.

Element Management The VS251-SFP is compatible with the standard FCS183 and the FCS183AEMS Advanced Element Management System. Both management systems are Web browser and SNMP enabled. The FCS183 provides the simplest Web interface with SNMP supported limited to major and minor predefined events. The FCS183-AEMS has more comprehensive browsing with virtual LED front-panel emulation and an SNMP MIB covering all status, control and alarm variables on the card.

Physical and Environmental Requires only one slot of the VS103 ten-slot chassis or the VS101 three-slot chassis.

Power Consumption <7W Operating Temp 0 ˚C to 50 ˚C ambient Storage Temp –40 ˚C to 85 ˚C Relative Humidity 5% to 85% Agency Compliance Telco NEBS level 3 Safety UL, CSA, CE low voltage directive EMC FCC Part 15 Class A, CE EMC directive

Ordering Information VS251-SFP (1310/1550nm and CWDM applications) “SFP” represents locations for small form factor pluggable (SFP) optical devices.

Use of one of the VPG SFP-TV or SFP-TRV family of high performance video SFPs covering 1310/1550nm and CWDM wavelengths with both PIN and APD receiver options. Please see the VPG SFP Selection Guide for further details.

SFPD denotes the use of DWDM SFPs. These devices are available as transceivers. Please see the VPG SFP Selection Guide for further details.

network-electronics.com

| 55

VENTURA

1.1 High Definition VS252-SFP-SFP

HD-SDI/SDI/SDTI/ASI/ATSC Dual Channel Fiber Optic TX/RX/TRX/Switch*

HD-SDI SDI/ASI

Opt RX

Driver

Laser

Driver

HD-SDI SDI/ASI

Driver

HD-SDI SDI/ASI

Driver

HD-SDI SDI/ASI

Driver

HD-SDI SDI/ASI

Driver

Laser

HD-SDI SDI/ASI

EDH/CRC Count HD-SDI SDI/ASI

Cab EQ

OR

Jitter Buffer

EDH/CRC Reset LSB Dither

HD-SDI Generator

NMS

2x2 Switch*

EDH/CRC Count HD-SDI SDI/ASI

Cab EQ

HD-SDI SDI/ASI

Opt RX

OR

Jitter Buffer

EDH/CRC Reset LSB Dither

The VS252 is a multifunction optical interface card in the High-Definition group of the Ventura™ product line. The card is dual-channel and supports TS bit rates from 10Mbps through 1.5Gbps.

It can be operated in various modes providing optical transport, protection and monitoring of HD-SDI, SDI, ASI and SMPTE-310 video.

• 10Mbps to 1.5Gbps with jitter management and non-jitter management modes • Jitter management at 1.485Gbps HD, 1.4835Gpbs HD and 270Mpbs SDI/ SDTI/ASI • Other rates supported in non-jitter management (bypass) mode • SFP optical interfaces supporting 1310nm, 1550nm, CWDM and DWDM • Minimum of 32dB optical dynamic range • Simplified single card holds spares configurable for E-O, O-E and O-O repeater, wavelength shifter or switch* with any wavelength • Full CRC and EDH checking in HD-SDI and SDI modes • Built-in HD-SDI test signal generator for remote network testing • Transports all HD and SD pathological patterns without additional scrambling at 1310/1550nm and CWDM • SNMP and Web browser supported under Ventura AEMS element management • NEBS Level 3 compliant

56 | network-electronics.com

HD-SDI SDI/ASI

VENTURA

High Definition

1.1 VS252-SFP-SFP

Operation

Optical Output (Each Channel)

This powerful HD/SD processor can be configured to provide electrical to optical, optical to electrical interfacing or as an optical to optical repeater and/or wavelength shifter. With two fully independent channels the card can also operate as an HD/SD transceiver, a 2x2 changeover switch or an automatic HD/SD protection switch in either the electrical or optical domain.

The unique design provides full jitter management of all HD/SD rates.

1310/1550nm wavelengths as well as the sixteen CWDM wavelengths are supported using a comprehensive range of VPG provided SFP optical modules. SFP DWDM is supported scrambling that allows SMPTE pathological patterns to pass error-free through all DWDM network elements. Element management provides detailed analysis of signal status, with CRC checking as well as optical interface monitoring and card status with Web browser and SNMP support.

Control of all card functions is available through element management or through on-board switches. The card is ideal for different telco environments where both large losses and poor dispersion characteristics associated with legacy fiber plant are overcome with carrier class longreach optics and jitter management techniques unique to VPG equipment designs.

Video Inputs Standards

HD-SDI SMPTE 292M SDI SMPTE 259M SDTI SMPTE 305M ATSC SMPTE 310M DVB-ASI EN50083-9

Tight telecom level jitter tolerance specifications are maintained at all SD/HD inputs, while telecom level jitter transfer and jitter generation specifications are maintained at all SD/HD outputs.

Standard Measurement SD/ASI SMPTE RP184 SMPTE RP192/EG33 HD SMPTE RP184 SMPTE RP192

Electrical Input (Each Channel) 1 75 ohm BNC >15dB at 1.5Gbps >150m of Belden 1694 at 1.5Gbps

Electrical Outputs (Each Channel) Number of Outputs Connector Type

2 Jitter managed 75 ohm BNC

Optical Input (Each Channel) Number of Inputs Connector Type Wavelength Range Sensitivity Level Overload Level

Power Out

1 SC/PC 1310/1550nm, CWDM DWDM with LSB scrambling 0dBm min, +1dBm typical

Front Panel LED Indicators There are two rows of nine LEDs comprehensively signaling the status and alarm conditions of each channel. Depending on the configuration of the card the LEDs have different meanings. This is tabulated in the manual.

External Alarms N/C relay contact outputs for major and minor alarms. Each alarm and status condition can be programmed as a major or minor alarm or can be disabled if not in use.

Element Management The VS252 is compatible with the standard FCS183 and the FCS183AEMS (Advanced Element Management System). Both NM systems are Web browser and SNMP enabled. The FCS183 provides the simplest Web interface with SNMP support limited to major and minor pre-defined events. The FCS183-AEMS has more comprehensive browsing with virtual LED front-panel emulation and an SNMP MIB covering all status, control and alarm variables on the card.

Physical and Environmental

Jitter Performance

Number of Inputs Connector Type Return Loss Equalization

Number of Outputs Connector Type Wavelengths

1 SC/PC 1270–1610nm -32dBm (worst case) –8dBm (worst case)

Requires only one slot of either the VS103 ten-slot chassis or the VS101 three-slot chassis Power Consumption <10W Operating Temp 0 ˚C to 50 ˚C ambient Storage Temp –40 ˚C to 85 ˚C Relative Humidity 5% to 85% Agency Compliance Telco NEBS Level 3 Safety UL, CSA, CE Low Voltage directive EMC FCC Part 15 Class A, CE EMC directive

Ordering Information VS252-SFP-SFP (1310/1550nm and CWDM applications) VS252-SFPD-SFPD (DWDM applications) SFP and SFPD represent locations for small form factor pluggable (SFP) optical devices.

The VS252 supports both standard and DWDM applications. However to use DWDM SFPs the VS252 must be ordered with a special adapter.

This adapter may be field retrofitted or the VS252 can be returned to the factory for conversion to DWDM. Consult factory for details.

SFP denotes use of one of the VPG SFP-TV or SFP-TRV family of high performance video SFPs covering 1310/1550nm and CWDM wavelengths with both PIN and APD receiver options. Please see the SFP Selection Guide for further details.

SFPD denotes the use of DWDM SFPs. These devices are available as transceivers. Please see the SFP Selection Guide for further details.

network-electronics.com

| 57

VENTURA

1.1 High Definition VS254-E-SFP

HD-SDI 4xAES Audio Embedder HD-SDI/SDI/SDTI/ASI/ATSC Fiber Optic Transmitter

4xAES Dolby-E/ AC-3 HD-SDI SDI/ASI

Sample Rate Converters and Bypass

AES RX

OR

Jitter Buffer

Laser

Driver

HD-SDI SDI/ASI

Driver

HD-SDI SDI/ASI

EDH/CRC Count EDH/CRC Reset

Cab EQ

Driver

LSB Dither

HD-SDI Generator

The VS254-E-SFP is an HD-SDI audio embedder and optical transmit card in the VS25x group of High-Definition solutions. As well as embedding four AES audio channels it also supports Dolby-E and any AES framed data. The card can also be configured to transport bit rates from 10Mbps through 1.5Gbps through its SFP fiber interfaces.

• Embeds up to four AES/EBU audio channels • Transparently handles any AES-framed data, such as Dolby-E • 10Mbps to 1.5Gbps with jitter managed and non-jitter managed modes • Jitter management at 1.485Gbps HD, 1.4835Gbps HD and 270Mbps SDI/ SDTI/ASI • Other rates supported in bypass mode • SFP optical interfaces supporting 1310nm, 1550nm, CWDM and DWDM • Minimum of 0dBm optical launch power • Simplified single card spares-holding, configurable EO to any wavelength by simple SFP change • Full CRC and EDH checking in HD-SDI and SDI modes • Built-in HD-SDI test signal generator for remote network testing • Transports all HD and SD pathological patterns without additional scrambling at 1310/1550nm and CWDM • SNMP and Web browser support under Ventura AEMS management • NEBS Level 3 compliant

58 | network-electronics.com

HD-SDI SDI/ASI

VENTURA

High Definition

1.1 VS254-E-SFP

Operation

Inputs

This powerful HD/AES processor embeds up to four synchronous or asynchronous AES channels into an HD-SDI video signal. All popular HD formats in the 1485Mbps and the 1485Mbps/1001 are supported.

Disabling the sample rate converters allows the transparent carriage of Dolby-E or any AES-framed data. By adding an SFP, the card is readily transformed into a fiber optic network interface. Configurable additional scrambling allowing can be enabled allowing SMPTE pathological patterns to pass error-free through all DWDM network elements. Element management provides detailed analysis of video and audio signal status, with CRC checking as well as optical interface monitoring and card status with Web browser and SNMP support. Control of all card functions is available through element management or through on-board switches.

Number of Inputs Connector Type A (A, B are Options) B Sampling Rage Level A B

4 110 ohm, Bal, 3-pin Phoenix 75 ohm, Unbalanced 48kHz 1Vp-p +/- 10% 0.5 to 10V p-p

Front Panel LED Indicators A row of nine LEDs comprehensively signal the status and alarm conditions of the card. Depending on the configuration of the card the LEDs have different meanings. This is tabulated in the manual.

Video Inputs External Alarms

Standards HD-SDI

SMPTE 292M 1080i/50, 1080i/60, 1080i/59.94, 1080p/24, 1080p/25, 1080p/23.98, 720p/60, 720p/59.94 SDI SMPTE 259M SDTI SMPTE 305M ATSC SMPTE 310M DVB-ASI EN50083-9

Jitter Performance Tight telecom level jitter tolerance specifications are maintained at all SD/HD inputs while telecom level jitter transfer and jitter generation specifications are maintained at all SD/HD outputs.

Practice Measurement SD/ASI SMPTE RP184 SMPTE RP192/EG33 HD SMPTE RP184 SMPTE RP192

Electrical Input Number of Inputs Connector Type Return Loss Equalization

1 75 ohm BNC >15dB at 1.5Gbps >150m of Belden 1694 at 1.5Gbps

Electrical Outputs Number of Outputs Connector Type

2 Jitter managed 75 ohm BNC

N/C relay contact outputs for major and minor alarms. Each alarm and status condition can be programmed as a major or minor alarm or can be disabled if not in use.

Element Management The VS254 is compatible with the standard FCS183 and the FCS183-AEMS (Advanced Element Management System). Both management systems are Web browser and SNMP enabled. A built-in-test HD-SDI generator can be enabled and switched in remotely to fully test a link. The FCS183-AEMS provides the simplest Web interface with SNMP supported limited to major and minor pre-defined events. The FCS183-AEMS has more comprehensive browsing with virtual LED front-panel emulation and an SNMP MIB covering all status, control and alarm variables on the card.

Physical and Environmental Requires only one slot of the VS103 ten-slot chassis or the VS101 three-slot chassis.

Power Consumption <10W Operating Temp 0 ˚C to 50 ˚C ambient Storage Temp –40 ˚C to + 85 ˚C Relative Humidity 5% to 85% Agency Compliance Telco NEBS Level 3 Safety UL, CSA, CE low voltage directive EMC FCC Part 15 Class A, CE EMC directive

Ordering Information VS254-E-SFP (1310/1550nm and CWDM applications)

Optical Output Number of Outputs Connector Type Wavelengths Power Out

1 SC/PC 1310/1550nm, CWDM, DWDM with LSB scrambling 0dBm min, +1dBm typical

“SFP” represents locations for small form factor pluggable (SFP) optical devices.

SMPTE 299M (Embedding) AES-3 (Balanced and Un-Bal) Dolby-E

SFP denotes use of one of the VPG SFP-TV family of high performance video SFPs covering 1310/1550nm and CWDM wavelengths. Please see the SFP Selection Guide for further details.

Audio Inputs Standards

The VS254 supports both standard and DWDM applications. However to use DWDM SFPs the VS254 must be ordered with a special adapter.

This adapter may be field retrofitted or the VS254 can be returned to the factory for conversion to DWDM. Consult factory for details.

network-electronics.com

| 59

VENTURA

1.1 High Definition VS254-D-SFP

HD-SDI 4xAES Audio De-embedder HD-SDI/SDI/SDTI/ASI/ATSC Fiber Optic Receiver

HD-SDI SDI/ASI

Opt RX

HD-SDI SDI/ASI

Cab EQ

HD-SDI Generator

EDH/CRC Count

OR

Jitter Buffer

EDH/CRC Reset

HD-SDI SDI/ASI

Driver

HD-SDI SDI/ASI

DeEmbed Audio LSB Dither

The VS254-D-SFP is an HD-SDI audio de-embedder and optical receive card in the VS25x group of High-Definition solutions. As well as de-embedding four AES audio channels it also supports Dolby-E and any AES framed data.

The card can also be configured to optically receive bit rates from 10Mbps through 1.5Gbps through its SFP fiber interfaces.

• De-embeds up to four AES/EBU audio channels • Transparently handles any AES-framed data such as Dolby-E • 10Mbps to 1.5Gbps with jitter managed and non-jitter managed modes • Jitter management at 1.485Gbps HD, 1.4835Gbps HD and 270Mbps SDI/ SDTI/ASI • Other rates supported in re-clocker bypass mode • SFP PIN and APD optical interfaces available • Minimum of 0dBm optical launch power • Simplified single card spares-holding, configurable EO PIN or APD by simple SFP change • Full CRC and EDH checking in HD-SDI and SDI modes • Built-in HD-SDI test signal generator for self-test • Receives all HD and SD pathological patterns without additional scrambling with both PIN and APD options • SNMP and Web browser support under Ventura AEMS management • NEBS Level 3 compliant

60 | network-electronics.com

Driver

AES TX

4xAES Dolby-E AC-3

VENTURA

High Definition

1.1 VS254-D-SFP

Operation

Front Panel LED Indicators

This powerful HD/AES processor de-embeds up to four AES channels from an HD-SDI video signal. All popular HD formats in the 1485Mbps and the 1485Mbps/1001 are supported. Dolby-E or any AES-framed data is also de-embedded. By adding an SFP the card is readily transformed into a fiber optic network interface. If additional scrambling has been enabled in the VS254-E to allow SMPTE pathological patterns to pass error-free through DWDM network elements, the VS254-D will pass those signals. Element management provides detailed analysis of video and audio signal status, with CRC checking as well as optical interface monitoring and card status with Web browser and SNMP support. Control of all card functions is available through element management or through on-board switches.

Video Inputs Standards HD-SDI

SMPTE 292M 1080i/50, 1080i/60, 1080i/59.94, 1080p/24, 1080p/25, 1080p/23.98, 720p/60, 720p/59.94 SDI SMPTE 259M SDTI SMPTE 305M ATSC SMPTE 310M DVB-ASI EN50083-9

Jitter Performance Tight telecom level jitter tolerance specifications are maintained at all SD/HD inputs while telecom level jitter transfer and jitter generation specifications are maintained at all SD/HD outputs.

Practice Measurement SD/ASI SMPTE RP184 SMPTE RP192/EG33 HD SMPTE RP184 SMPTE RP192

Electrical Input Number of Inputs Connector Type Return Loss Equalization

1 75 ohm BNC >15dB at 1.5Gbps >150m of Belden 1694 at 1.5Gbps

Electrical Outputs Number of Outputs Connector Type

2 Jitter managed 75 ohm BNC

Optical Input Number of Inputs Connector Type Wavelengths Sensitivity at 1.5Gbps Overload

1 SC/PC 1270nm–1610nm –32dBm (worst case) –8dBm

Audio Outputs Standards

A row of nine LEDs comprehensively signal the status and alarm conditions of the card. Depending on the configuration of the card the LEDs have different meanings. This is tabulated in the manual.

External Alarms N/C relay contact outputs for major and minor alarms. Each alarm and status condition can be programmed as a major or minor alarm or can be disabled if not in use.

Element Management The VS254 is compatible with the standard FCS183 and the FCS183-AEMS (Advanced Element Management System). Both management systems are Web browser and SNMP enabled. A built-in-test HD-SDI generator can be enabled and switched in remotely to self-test the card. The FCS183-AEMS provides the simplest Web interface with SNMP supported limited to major and minor pre-defined events. The FCS183-AEMS has more comprehensive browsing with virtual LED front-panel emulation and an SNMP MIB covering all status, control and alarm variables on the card.

Physical and Environmental Requires only one slot of the VS103 ten-slot chassis or the VS101 three-slot chassis.

Power Consumption <10W Operating Temp 0 to 50 C ambient Storage Temp –40 ˚C to +85 ˚C Relative Humidity 5% to 85% Agency Compliance Telco NEBS Level 3 Safety UL, CSA, CE low voltage directive EMC FCC Part 15 Class A, CE EMC directive

Ordering Information VS254-D-SFP (PIN and APD for 1310/1550 and CWDM) VS254-E-SFPD (APD for DWDM applications) SFP and SFPD represent locations for small form factor pluggable (SFP) optical devices.

The VS254 supports both PIN, and APD receivers for standard and CWDM as well as APD for DWDM applications where the additional scrambling is used. However to use DWDM SFPs the VS254 must be ordered with a special adapter. This adapter may be field retrofitted or the VS254 can be returned to the factory for conversion to DWDM. Consult factory for details.

SFP denotes use of one of the VPG SFP-TV family of high performance video SFPs with PIN or APD technology. Please see the SFP Selection Guide for further details.

The standard connector panel supports balanced AES inputs with Phoenix 3-way connectors. If unbalanced BNCs are required please specify at the time of order.

SMPTE 299M (de-embedding) AES-3 (balanced and un-bal) Dolby-E

Outputs Number of Outputs Connector Type A (A, B are Options) B Sampling Rage Level A B

4 110 ohm, Bal, 3-pin Phoenix 75 ohm, unbalanced 48kHz 1Vp-p +/- 10% 0.5 to 10V p-p

network-electronics.com

| 61

VENTURA

1.1 High Definition VS551-D-ADC-SFP

Transmitter – Universal Analog & Digital Video/Audio Adapter for Fiber Optic Transport • Automatically detects video input format • Converts NTSC/PAL/PAL-M Video and ATSC, SD-SDI, HD-SDI and DVB-ASI inputs to SDTI/SDI and optical output for transport over 270Mbps network • Handles 525/625 SD-SDI and 1.4835/1.485Gbps HD-SDI • Composite test pattern generator • Converts up to four channels of analog audio to AES • Dolby E – compatible • Non-intrusive audio monitoring and level adjustment • Embeds AES converted from analog audio or direct-fed AES into SDTI, SD-SDI or HD-SDI • Warning LEDs for loss of video, loss of audio, CRC/EDH • Small Form-factor Pluggable (SFP) optics available in 1310, 1550, and any ITU CWDM or DWDM wavelength • Engineered to meet NEBS Level 3 requirements • Compatible with FCS183 AEMS and EMS element managers

Analog video Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of inputs 1 Monitors 1 front panel Connector BNC Impedance 75 ohm Quantization 12-bit Equalization Up to 300m w/Belden 8281 SNR >70dB Differential gain <2% (NTSC), <1% (PAL) Differential phase <0.7° (NTSC), <0.5° (PAL)

DIGITAL audio Standards AES unbalanced (SMPTE-276M) AES balanced (AES3-1992) Dolby E # of inputs 2 rear balanced or unbalanced Connector Phoenix 3-pin balanced, 110 ohm BNC 75 ohm Signal level Unbalanced 1.2 Vp-p Balanced 1 to 7 Vp-p Resolution Supports up to 24 bits Sample rates 32kHz, 44kHz, 48kHz sample rates converted to 48kHz

optical TRANSMITTER Digital video Standards

SDTI (SMPTE-305M), SDI (SMPTE-259M), HD-SDI (SMPTE-292M), DVB-ASI (EN50083-9), ATSC (SMPTE-310M) # of inputs 1 # of outputs 2 electrical, 1 optical Monitors 1 front panel Connector BNC Impedance 75 ohm Data rate 19.4Mbps, 270Mbps, 1.4835Gbps, 1.485Gbps Equalization Up to 150m at 1.5Gbps with Belden 1694A Up to 300m at 270Mbps with Belden 8281 Jitter Exceeds SMPTE standard Return loss Exceeds SMPTE standard

analog audio Standards Exceeds RS250C short haul specs # of inputs 4 Connector 3-pin terminal Impedance Hi-Z or 600 ohm (balanced) Sampling rate 48 KHz Quantization 20-bit SNR unweighted -90 dBFS Frequency response 0.5 dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, @ 0 dBFS) IMD <0.05% SMPTE @ +2 dBu Crosstalk between channels 95 dB Input/output level 0 dBFS = +24dBu (Hi-Z) 0 dBFS = +18dBu (600 ohms)

62 | network-electronics.com

# of outputs Connector Laser type Laser wavelengths Output power level Fiber type

1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min (1310 & 1550) -0.5dBm min (CWDM) Single mode

LED indicators Video mode HD/SD/ASI Loss of input CRC/EDH for HD/SD Audio mode analog/AES Loss of audio Analog 1, 2, 3, 4 AES 1, 2

element management Compatible with the FCS183 comprehensive element management system that features SNMP and Web browser Interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura Series chassis Voltage +3.3V, +5V, +12V, -12V Power consumption 9W max Operating temperature 0 ˚C to 50˚C chassis ambient Storage temperature –40 ˚C to 85 ˚C ambient

Ordering Options VS551-D-ADC-SFP Analog to digital converter with audio embedder (SFP cage Included, SFP sold separately) For optical interface options, see Ventura SFP Index data sheet.

VENTURA

High Definition

1.1 VS551-D-DAC-SFP

Receiver – Universal Analog and Digital Video and Audio Adapter for Fiber Optic Transport • Receives all SD-SDI, HD-SDI, ASI and ATSC optically and electrically • De-embeds four channels of audio from SD-SDI and HD-SDI and provides AES and analog outputs • Dolby E – compatible • Converts SDTI to NTSC/PAL/PAL-M • Non-intrusive analog audio monitoring and level adjustment • Loss of input, loss of video, EDH/CRC, loss of audio LEDs • Remote loss of video and loss of audio LEDs • Small Formfactor Pluggable (SFP) optics with APD receiver for optimum sensitivity • Engineered to meet NEBS Level 3 requirements • Compatible with the FCS183 comprehensive element management system that provides remote status, alarms and configurations via SNMP and Ethernet

Analog video Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of outputs 2 Monitors 1 front panel Connector BNC Impedance 75 ohm Quantization 12-bit Equalization Up to 300m w/Belden 8281 SNR >70dB Differential gain <2% (NTSC), <1% (PAL) Differential phase <0.7° (NTSC), <0.5° (PAL)

Digital video Standards

SDTI (SMPTE-305M) SDI (SMPTE-259M) HD-SDI (SMPTE-292M) DVB-ASI (EN50083-9) ATSC (SMPTE-310M) # of inputs 1 optical (see optical spec), 1 electrical # of outputs 2 Monitors 1 front panel Connector BNC Impedance 75 ohm Data rate 19.4Mbps, 270Mbps, 1.4835Gbps, 1.485Gbps Equalization Up to 150m at 1.5Gbps with Belden 1694A Up to 300m at 270Mbps with Belden 8281 Jitter Exceeds SMPTE standard Return loss Exceeds SMPTE standard

analog audio Standards Exceeds RS250C short haul specs # of outputs 4 Connector 3-pin terminal Impedance Hi-Z or 600 ohm (balanced) Sampling rate 48KHz Quantization 20-bit SNR unweighted -90dBFS Frequency response 0.5dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, at 0dBFS) IMD <0.05% SMPTE at +2 dBu Crosstalk between channels 95dB Input/output level 0dBFS = +24dBu (Hi-Z) 0dBFS = +18dBu (600 ohms)

DIGITAL audio Standards AES unbalanced (SMPTE-276M) AES balanced (AES3-1992) Dolby E # of inputs 2 rear balanced or unbalanced Connector Phoenix 3-pin balanced, 110 ohm BNC 75 ohm, unbalanced Signal level Unbalanced 1.2Vp-p Balanced 1 to 7Vp-p Resolution Supports up to 24 bits

optical RECEIVER # of inputs Connector Receiver type Input wavelengths Sensitivity Max input power Fiber type

1 SC/PC SFP - APD 1260nm - 1620nm ≤-34dBm –8dBm (+7dBm with 15dB attenuator) Single mode

LED indicators Video Mode HD/SD/ASI Loss of input (local and remote) CRC/EDH for HD/SD Audio mode analog/AES Loss of audio Analog 1, 2, 3, 4 AES 1, 2 (local and remote)

element management Compatible with the FCS183 comprehensive element management system that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura Series Chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 9W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient

Ordering Options VS551-D-DAC-SFP Universal analog and digital video and audio fiber receiver

network-electronics.com

| 63

VENTURA

1.1 IP Network Interfaces VS901-TE-27 / VS901-TD-27

JPEG 2000 Compression over SDTI • Artifact-free Motion JPEG 2000 compression—no blocking, tiling or motion dependence • Visually lossless compression to a 12:1 compression ratio • Near-mathematically lossless compression to a 2:1 compression ratio • User-configurable compression ratio, either by explicit setting or by selecting maximum bandwidth of transport interface • Multiplexes audio into the transport stream, either pre-embedded into the HD-SDI signal or by locally embedding from AES interfaces on the encoder • Supports all HD video framing formats at 1485Mbps, 1483.52Mbps • Occupies a single Ventura chassis slot

encoder Digital video

LED indicators

# of Inputs # of Outputs

1 HD-SDI or 3G-SDI coax 1 SDTI coax (SMPTE 305) 1 HD-SDI or 3G-SDI front panel monitor coax Connector Coax

Power indicator Loss of input CRC/EDH for HD/SD Optical fault indicator Loss of audio

element management

encoder DIGITAL audio

Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser Interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Due to the complexity of VS901 functions, element management is its primary method of configuration and operation.

# of Inputs 4 Connector AES/EBU 110 ohm balanced or 75 ohm single ended units

decoder Digital video # of Inputs # of Outputs

1 SDTI coax (SMPTE 305) 1 HD-SDI or 3G-SDI coax 1 HD-SDI or 3G-SDI front panel monitor coax Connector Coax

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 9W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

decoder DIGITAL audio # of Outputs 4 Connector AES/EBU 110 ohm balanced or 75 ohm single ended units

Ordering Options VS901-TE-27

HD/SDI compression via JPEG 2000 and mapping to SDTI (SMPTE 305). Carriage of up to four pre embedded AES streams.

Separate carriage of VBI information.

VS901-TD-27 SDTI Receiver with decompression via JPEG 2000 of HD-SDI. Re embedding of up to four transported AES streams and any transported VBI data For optical interface options, see Ventura SFP Index data sheet.

ENCODER and decoder optical TRANSCEIVER # of outputs/inputs Connector

1 SFP transceiver for Ethernet, SDTI, OC3/ STM-1, OC12/STM-4

Encoder and decoder clock input 1 BITS clock input for use with SONET

VS901-TE-27

SDI/ASI

HD/SDI/ASI

HD

HD

1

2

3

SDI/ASI

Compressed HD Video

Compressed HD Video

JPEG2000 Encoder

Audio & Data De-embedder 1 2 3 4

VS901-TD-27

4

AES Inputs

64 | network-electronics.com

SDTI Data AES 1 AES 2 AES 3 AES 4

SDTI

MUX SFP

SDTI 270Mbps Network

SDTI SFP

DEMUX

Data

AES 1 AES 2 AES 3 AES 4

HD/SDI/ASI

JPEG2000 Decoder

HD

HD

Audio & Data Embedder 1

2

3

4

AES Outputs

1 2 3 4

VENTURA

IP Network Interfaces

1.1

VS901-IE-GE* / VS901-ID-GE*

JPEG 2000 Compression Over Gigabit Ethernet • Encoder and decoder each occupy a single Ventura chassis slot • Supports all HD video framing formats at 1485Mbps and 1483.5Mbps • Multiplexes uncompressed audio into the transport stream, either preembedded into the HD-SDI signal or by locally embedding from AES interfaces on the encoder • Transparent carriage of ancillary data • Artifact-free motion JPEG 2000 compression–no blocking, tiling or motion dependence • Intra-frame encoding • Near-mathematically lossless compression with a Gigabit Ethernet interface • Visually lossless compression to a 12:1 compression ratio • Automatically calculates mathematically lossless compression ratio for each frame to ensure constant lossless quality • Configurable FEC with standard and advanced mode settings • Complies with IEEE 802.3 standards • IP/UDP/RTP packets • Simultaneous electrical and optical outputs from encoder • Encode plus decode delay less than 50ms • Compatible with FCS183-AEMS Advanced Element Management System

encoder Digital video # of inputs # of outputs Connector

LED indicators

1 HD-SDI, SMPTE 292M, SMPTE 299M 1 HD-SDI front panel monitor 75 Ohm BNC

Power indicator Loss of HD video Loss of audio CRC errors and IP FEC Optical fault indicator

encoder DIGITAL audio # of inputs 4 Connector AES/EBU 110 Ohm balanced or 75 Ohm single ended units

Element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Due to the complexity of VS901 functions, element management is its primary method of configuration and operation.

decoder Digital video # of outputs

2 HD-SDI or 75 Ohm BNC 1 HD-SDI front panel monitor 75 Ohm BNC

Connector

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power consumption 10W max Operating temperature 0˚ to 50˚C chassis ambient Storage temperature –40 ˚C to 85 ˚C ambient Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

decoder DIGITAL audio # of outputs 4 Connector AES/EBU 110 Ohm balanced or 75 ohm single ended units

ENCODER and decoder Ethernet # of outputs/inputs Connector

1 100/1000 Base-T RJ45 Ethernet connector

Ordering Options VS901-IE-GE

HD/SDI compression via JPEG 2000 and mapping to Gigabit Ethernet. Carriage of up to four pre-embedded AES streams. Separate carriage of ANC data information VS901-TD-27 Gigabit Ethernet receiver with decompression via JPEG 2000 of HD-SDI. Re-embedding of up to four transported AES streams and any transported ANC data For optical interface options, see the Ventura SFP Index data sheet.

ENCODER and decoder optical TRANSCEIVER # of outputs/inputs Connector

1 SFP transceiver for Ethernet, dual SC/PC

VS901-IE-GE

HD

VS901-ID-GE

100/1000 Base-T

JPEG2000 Encoder Compressed HD Video

HD

1 2 3 4

Audio & Data De-embedder 1

2

AES Inputs

3

4

ANC Data AES 1 AES 2 AES 3 AES 4

100/1000 Base-T Compressed HD Video

270Mbps Network MUX SFP 100/1000 Base-T

SFP 100/1000 Base-T

DEMUX

ANC Data

AES 1 AES 2 AES 3 AES 4

JPEG2000 Decoder

HD

Audio & Data Embedder 1

2

3

4

AES Outputs

HD

1 2 3 4

network-electronics.com

| 65

VENTURA

1.1 Data VS701

RS422 Control Fiber Optic Transceiver • One full duplex independent RS422 channel • Up to 2Mbps • Low timing jitter due to high oversampling rate • Can be switched through and SDI router • Automatic cable equalization up to 300m for Belden 8281 • Optical and electrical 270Mbps outputs • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

1310/1550/CWDM

1310/1550/CWDM

TX

RX

RX RS422 CH1

VS711

TX

270Mbps Network

TX

RX

RX 270Mbps

Digital I/O

270Mbps

external alarms

# of Inputs 1 # of Outputs 1 Connector BNC Impedance 75 ohm Data Rate 270Mbps Equalization Up to 300m w/Belden 8281

Optical transmitter # of Outputs Connector Data Rate Laser Type Laser Wavelengths Output Power Level Fiber Type

RS422 CH1

VS711

TX

1 SC/PC 270Mbps SFP 1310nm, 1550nm, CWDM, DWDM 0dBm min Single mode

N/C relay contact outputs for major and minor alarm signals.

element management Compatible with the FCS183 and FCS183-AEMS that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms Loss of optical input Loss of frame Loss of input Loss of channel I/O activity Status Optical/electrical receiver mode Laser transmitter enabled/disabled Model and serial number Controls Receiver mode optical/electrical Laser transmitter enable/disable ID setting for the VS811 (0-65535)

Physical and Environmental optical receiver # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type

1 SC/PC PINFET pigtail 1260nm–1620nm ≤-34dBm 0dBm Single mode

Ordering Options

RS422 # of Channels Connector Receive Data Jitter Receiver Termination

Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 7W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

1 DB9 Female <±40ns 124 ohm

LED indicators Channel 1 I/O activity Loss of optical input Loss of frame Laser failure DC power

66 | network-electronics.com

VS701-SFP RS422 control fiber optic transceiver SFP Options SFP-TV-1310-SF SFP-TV-1550-SD SFP-TV-1470-C SFP-TV-1490-C SFP-TV-1510-C SFP-TV-1530-C SFP-TV-1550-C SFP-TV-1570-C SFP-TV-1590-C SFP-TV-1610-C SFP-RV-PIN

Video 270/1500Mbps, TX, non-CWDM FP Video 270/1500Mbps, TX, non-CWDM DFB Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX,CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, RX, PIN

VENTURA

Data

1.1 VS711

Quad RS422 Control Fiber Optic Transceiver • Four full duplex independent RS422 channels • Up to 2Mbps per a channel • Low timing jitter due to high oversampling rate • Can be switched through an SDI router • Automatic cable equalization up to 300m for Belden 8281 • Optical and electrical 270Mbps outputs • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

1310/1550/CWDM

RS422 CH2 RS422 CH3

RX

RX VS711

RS422 CH4

TX

1 SC/PC 270Mbps SFP 1310nm, 1550nm, CWDM, DWDM 0dBm min Single mode

RS422 CH4

N/C relay contact outputs for major and minor alarm signals.

element management Compatible with the FCS183 and FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms Loss of optical input Loss of frame Loss of input Loss of channel I/O activity Status Optical/electrical receiver mode Laser transmitter enabled/disabled Model and serial number Controls Receiver mode optical/electrical Laser transmitter enable/disable ID setting for the VS811 (0-65535)

Physical and Environmental 1 SC/PC PINFET pigtail 1260nm–1620nm ≤-34dBm 0dBm Single mode

RS422

Channel 1 I/O activity Channel 2 I/O activity Channel 3 I/O activity Channel 4 I/O activity Loss of optical input Loss of frame Laser failure DC power

RS422 CH3

270Mbps

external alarms

optical receiver

LED indicators

RS422 CH2

VS711

TX 270Mbps

Optical transmitter

# of Channels Connector Receive Data Jitter Receiver Termination

RX

RX

# of Inputs 1 # of Outputs 1 Connector BNC Impedance 75 ohm Data Rate 270Mbps Equalization Up to 300m w/Belden 8281

# of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type

RS422 CH1

TX

270Mbps Network

Digital I/O

# of Outputs Connector Data Rate Laser Type Laser Wavelengths Output Power Level Fiber Type

1310/1550/CWDM

TX

RS422 CH1

4 DB25 female <±40ns 124 ohm

Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 7W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS711-SFP-TRX

Fiber optic transceiver with 4 RS422 ch.

SFP Options SFP-TV-1310-SF SFP-TV-1310-SD SFP-TV-1550-SD SFP-TV-1470-C SFP-TV-1490-C SFP-TV-1510-C SFP-TV-1530-C SFP-TV-1550-C SFP-TV-1570-C SFP-TV-1590-C SFP-TV-1610-C SFP-RV-PIN

Video 270/1500Mbps, TX, non-CWDM FP Video 270/1500Mbps, TX, non-CWDM DFB Video 270/1500Mbps, TX, non-CWDM DFB Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, RX, PIN

network-electronics.com

| 67

VENTURA

1.1 Data VS721

10/100 Base-T Ethernet Optical Transceiver • Full-featured 10/100 Base-T Ethernet metropolitan transport solution • Greater than 30dB optical link budget • SFP optics allow for optimum sparing and fast configuration to available Ventura wavelengths • Standards based on the fiber interface—100Base-T • UTP port supports 10/100 and half/full duplex as well as auto-negotiation • Automatic cable equalization up to 100m at gigabit rate • Front panel LED information provides link diagnostics allowing for instant fault location • Bandwidth control allows service providers to configure UTP rate to 10 or 100 Mbps • Can be used in both VS101 and VS103 Ventura chassis • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet

1310/1550/CWDM RJ-45 10/100 Base-T

TX VS721

RX 100 Base-T

Digital I/O

Optical transmitter

Output Power Level Fiber Type

1 SC/PC 100/10Mbps SFP 1310nm, 1510nm, 1530nm, 1550nm, CWDM, DWDM 0dBm min Single mode

optical receiver # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type

TX RX

VS721

RJ-45 10/100 Base-T

100 Base-T

element management

# of Inputs 1 # of Outputs 1 Connector RJ45 Impedance 100 ohm Data Rate 100/10Mbps Equalization 100M Cat 5e

# of Outputs Connector Data Rate Laser Type Laser Wavelengths

1310/1550/CWDM 270Mbps Network

1 SC/PC SFP 1260nm–1620nm ≤–32dBm 0dBm Single mode

LED indicators Fiber full/half duplex Fiber link/activity Auto negotiate 10 M 100 M 1G UTP full/half duplex UTP link/activity DC power

external alarms N/C relay contact outputs for major and minor alarm signals.

68 | network-electronics.com

Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Alarms Daughter card power alarm Fiber link alarm SFP optical source fault SFP optical low light SFP transmitter output power SFP Iinternal supply voltage SFP transmitter internal bias current SFP internal temperature UTP link alarm Status SFP laser transmitter present Full duplex mode for fiber selected Auto negotiation activated Link speed 100Mbps RJ45 UTP is in full duplex mode SFP transmitter wavelength Model and serial number Controls Laser transmitter enable/disable

Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V Power Consumption 7W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Ordering Options VS721

10/100 Base-T Ethernet

SFP Options SFP-TV-1310-SF SFP-TV-1550-SD SFP-TV-1470-C SFP-TV-1490-C SFP-TV-1510-C SFP-TV-1530-C SFP-TV-1550-C SFP-TV-1570-C SFP-TV-1590-C SFP-TV-1610-C SFP-RV-PIN

Video 270/1500Mbps, TX, non-CWDM FP Video 270/1500Mbps, TX, non-CWDM DFB Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX,CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, RX, PIN

VENTURA

Data

1.1 VS722

Gigabit Ethernet Fiber Transport • Full-featured Gigabit Ethernet metropolitan transport solution • Greater than 30dB optical link budget • SFP optics allows for optimum sparing and fast configuration to available Ventura wavelengths • Standards-based on the fiber interface—1000Base-LX • UTP port supports 10/100/1000 and half/full duplex and auto-negotiation • Automatic cable equalization up to 100m at gigabit rate • Front panel LED information provides link diagnostics allowing for instant fault location • Bandwidth control allows service providers to configure UTP rate to 10 or 100 or 1000 Mbps • Can be used in both VS101 and VS103 Ventura chassis • NEBS Level 3 certified • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet 1310/1550/CWDM RJ-45 10/100/1000 Base-T

TX VS722

RX 1000 Base-LX

DIGITAL I/O

OPTICAL TRANSMITTER

Output Power Level Fiber Type

1 SC/PC 1000/100/10Mbps SFP 1310nm, 1510nm, 1530nm, 1550nm, CWDM, DWDM 0dBm min Single mode

OPTICAL RECEIVER # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type

RX TX

RJ-45 10/100/1000 Base-T

VS722

1000 Base-LX

PHYSICAL AND ENVIRONMENTAL

# of Inputs 1 # of Outputs 1 Connector RJ45 Impedance 100 ohm Data Rate 1000/100/10Mbps Equalization 100M Cat 5e

# of Outputs Connector Data Rate Laser Type Laser Wavelengths

1310/1550/CWDM 270Mbps Network

1 SC/PC SFP 1260nm–1620nm ≤–32dBm 0dBm Single mode

LED INDICATORS Fiber full/half duplex Fiber link/activity Auto negotiate 10 M 100 M 1G UTP full/half duplex UTP link/activity DC power

EXTERNAL ALARMS N/O relay contact outputs for major and minor alarm signals.

Resides in a single slot of a VS101 or VS103 Ventura series chassis.

Voltage +3.3V, +5V, +12V Power Consumption 7W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick

Element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces to monitor and configure card status, alarms and controls.

Alarms Daughter card power alarm Fiber link alarm SFP optical source fault SFP optical low light SFP transmitter output power low SFP internal supply voltage high SFP internal supply voltage low SFP transmitter internal bias current high SFP transmitter internal bias current low SFP internal temperature high SFP internal temperature low SFP transmitter output power high UTP link alarm Status SFP laser transmitter present Full duplex mode for fiber selected Auto negotiation activated Link speed 1000Mbps RJ45 UTP is in_full_duplex_mode SFP transmitter wavelength Model and serial number Controls Laser transmitter enable/disable

Ordering Options VS722-TRX-SFP SFP Options SFP-TR1-1310-PIN-S SFP-TR1-1550-PIN-S SFP-TR1-1470-PIN-C SFP-TR1-1490-PIN-C SFP-TR1-1510-PIN-C SFP-TR1-1530-PIN-C SFP-TR1-1550-PIN-C SFP-TR1-1570-PIN-C SFP-TR1-1590-PIN-C SFP-TR1-1610-PIN-C

1Gbps, TRX, non-CWDM 1Gbps, TRX, non-CWDM 1Gbps, TRX, CWDM 1Gbps, TRX, CWDM 1Gbps, TRX, CWDM 1Gbps, TRX, CWDM 1Gbps, TRX, CWDM 1Gbps, TRX, CWDM 1Gbps, TRX, CWDM

network-electronics.com

| 69

VENTURA

1.1 Specialty ODU201

SDI/ASI Fiber Optic Transport • SDI, SDTI and ASI compatible • Automatic data rate selection • Passes SMPTE-259M 270Mbps SDI pathological test sequence • Loss of video, loss of input, laser failure and DC power LEDs • Automatic cable equalization up to 300m for Belden 8281 • Optical and electrical 270Mbps outputs • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength

SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9)

1310/1550/CWDM 270Mbps

ODU201

Digital video

270Mbps

PIN Rcv’r VS231-OE

270Mbps

SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9)

Physical and Environmental

Standards

SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of Inputs 1 Connector BNC Impedance 75 ohm Data Rate Up to 270Mbps Equalization Up to 300m w/Belden 8281

Optical transmitter # of Outputs Connector Laser Type Laser Wavelengths Output Power Level Fiber Type

270Mbps Network

The (226.54mm x 149.63mm x 51.13mm) chassis is suitable for mounting within a NEMA 4 enclosure or mounting on a flat horizontal or vertical surface with input, output and power connections to the rear.

Voltage +12V +/-1V Power Consumption 3W typical Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85%

Ordering Options 1 ST Pigtail, SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min Single mode

LED indicators SDI in Laser fail DC power

70 | network-electronics.com

ODU201-SFP-EO ODU-PSDC

SDI/ASI E/O, no laser DC, 1 Amp powersupply

SFP Options SFP-TV-1310-SF SFP-TV-1550-SD SFP-TV-1470-C SFP-TV-1490-C SFP-TV-1510-C SFP-TV-1530-C SFP-TV-1550-C SFP-TV-1570-C SFP-TV-1590-C SFP-TV-1610-C SFP-RV-PIN

Video 270/1500Mbps, TX, non-CWDM FP Video 270/1500Mbps, TX, non-CWDM DFB Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX,CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, RX, PIN

VENTURA

Specialty

1.1 ODU271

RS422 Control Fiber Optic Transceiver • Single RS422 channel • Up to 2Mbps per channel • Low timing jitter due to high oversampling rate • Can be switched through an SDI router • SDI, SDTI and ASI compatible • Automatic data rate selection • Passes SMPTE-259M 270Mbps SDI pathological test sequence • Loss of video, loss of input, laser failure and DC power LEDs • Automatic cable equalization up to 300m for Belden 8281 • Optical and electrical 270Mbps outputs • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength

1310/1550/CWDM RX VS231-OE

SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9)

VS701-OE

RS422 Data I/O

1310/1550/CWDM TX

RS422 Data I/O SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9)

ODU271

RX TX

270Mbps Network 1310/1550/CWDM RX TX

Digital I/O

LED INDICATORS

Standards

SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of Inputs 1 Connector BNC Impedance 75 ohm Data Rate 270Mbps Equalization Up to 300m w/Belden 8281

Optical transmitter # of Outputs Connector Data Rate Laser Type Laser Wavelengths Output Power Level Fiber Type

2 ST 270Mbps, RS422 SFP 1310nm, 1550nm, CWDM, DWDM 0dBm min Single mode

RS422 Alarms SDI Alarms Laser fail SDI in Low light Laser fail LOF (optical input) RS422 in RS422 out DC power

Physical and Environmental The (226.54mm x 149.63mm x 51.13mm) chassis is suitable for mounting within a NEMA 4 enclosure or mounting on a flat horizontal or vertical surface with input, output and power connections to the rear.

Voltage +12V +/-1V Power Consumption 8.5W typical Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85%

Ordering Options optical receiver # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type

1 ST PIN 1260nm–1620nm ≤–34dBm 0dBm Single mode

RS422 # of Channels Connector Receive Data Jitter Receiver Termination

1 DB9 female <±40ns 124 ohm

ODU271-SFP-EO-SFP ODU-PSDC

SDI/422 E/O, TX + RS422 Transceiver DC, 1 Amp Power Supply

SFP Options SFP-TV-1310-SF SFP-TV-1550-SD SFP-TV-1470-C SFP-TV-1490-C SFP-TV-1510-C SFP-TV-1530-C SFP-TV-1550-C SFP-TV-1570-C SFP-TV-1590-C SFP-TV-1610-C SFP-RV-PIN

Video 270/1500Mbps, TX, non-CWDM FP Video 270/1500Mbps, TX, non-CWDM DFB Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX,CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, RX, PIN

network-electronics.com

| 71

VENTURA

1.1 Specialty VS192

2-Channel SMPTE310-M to DVB-ASI Converter

The VS192 is a SMPTE310-M to DVB-ASI converter with dual SMPTE310-M input and dual coaxial cable and single optical output for each channel.

It has two independent transmission channels which can accept SMPTE310-M transmission stream (19.39Mbps) and output DVB-ASI at 270Mbps. Each channel can be configured as an electro-optical converter by the installation of a VPG SFP optical video laser module.

• Two independent channels per card • SMPTE310-M to DVB-ASI mapping • Optical and electrical 270Mbps outputs • 188, 204 and 208 byte support • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • ATSC and ASI compatible • Automatic recognition, control and configuration by FCS183-AEMS and FCS183-AEMS using SNMP or Web browser interface • User definable alarms based on priority (major, minor or no alarm) • Slow start circuit on all power rails to minimize power supply overshoot • NEBS Level 3 compliant

72 | network-electronics.com

VENTURA

Specialty

1.1 VS192

Standard Application for VS192 ATSC Transport Stream (SMPTE310-M) to DVB-ASI Adapter

SMPTE310-M Broadcast ATSC TS1

Studio

SMPTE310-M ATSC TS2

VS192

DVB-ASI (1) DVB-ASI (2)

270Mbps DVB-ASI Transport Network Optical or Telco

DVB-ASI (1) DVB-ASI (2)

Cable or IPTV or Satellite Headend

IPTV

Cable

Digital video

element management

Standards

19.392Mbps (SMPTE310-M) DVB-ASI (EN50083-9) # Of Inputs 2 (SMPTE310-M) # Of Outputs 4 (coaxial cable) 2 (optical fiber) Connector BNC Impedance 75ohm Data Rate Up to 270Mbps Equalization Up tp 200m

optical transmitter # Of Outputs Connector Laser Type Laser Wavelength Output Power Level Fiber Type

}

Distribution to Residential Customers

2 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min Single mode

led indicators PWR Backplane power status CH1 SMPTE310-M Activity on input CH1 LSR SFP laser fault status CH2 SMPTE310-M Activity on input CH2 LSR SFP laser fault/presence

Compatible with the FCS183-AEMS and FCS183-AEMS that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Status CH1/CH2 SMPTE310-M CH1/CH2 SFP laser transmitter CH1/CH2 SFP laser transmitter FAIL Controls set by switches/element management CH1/CH2 default output enabled by DIP switch with loss of SMPTE310-M input Controls CH1/CH2 default output enabled with loss of SMPTE310-M input

physical and environmental The VS192 card resides in a single slot of a VS103 series chassis.

Voltage 5V and 3.3V chassis supply Power Consumption 7W max Operating Temperature 0 °C/32°F to 50 °C/122°F Storage Temperature -40 °C/-40°F to 85 °C/185°F Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-TICK, and RoHS

Ordering Options VS192-SFP

SMPTE310-M to DVB-ASI converter

Configuration Each channel will have simultaneous optical and electrical outputs if a transmitter SFP is populated. Enable “keep-alive” separately for each channel, controlled by element management or DIP switch, consisting of option to output continuous “comma” characters in absence of input SMPTE310-M signal.

network-electronics.com

| 73

VENTURA

1.1 Specialty Break Out Panel, Frame and Cable

VS150-FR –1RU break out panel frame for one or two break out panels VS711

BP-PL75 – break out panel for VS711. Eight twin-ax PL75 connectors

DB25/PL-75-XX – cable between VS711dB25 connector and PL75 break out panel XX is the cable length in feet. Not to exceed 10 feet.

74 | network-electronics.com

VENTURA

1.1

network-electronics.com

| 75

VENTURA

1.1 SFP Selection Index SFP Options

Small Form-factor Pluggable Components

SFP components provide flexibility by enabling a Ventura card to support different line speeds or laser wavelengths at different times, or to change from simplex to duplex communications.

This document describes the functions provided by various SFP components, and the Ventura cards where they can be used.

Video Products Group SFP part numbers indicate the part’s laser color or wavelength in the third part-number element. The fourth element should be interpreted as follows: S 1310 or 1550 Standard DFB SD Standard Distributed Feedback (not “Standard Definition”) SF Standard Fabrey-Perot C CWDM PIN Optimized for 270Mbps (SD-SDI) APD Optimized for 1485Mbps (HD-SDI)

270Mbps simplex video signals Available for: VS192

VS201

VS501

VS621

VS701

ODU201

VS194

VS231

VS551

VS661

VS711

ODU271

Part number

SFP-TV-1310-S

270 or 1485Mbps simplex video signals Available for: VS251

VS252

Part number

76 | network-electronics.com

VS254 SFP-TV-1310-SD

VS721

VENTURA

SFP Selection Index

1.1 SFP Options

270 or 1485Mbps simplex video signals Available for

VS192

VS201

VS251

VS501

VS621

VS701

ODU201

VS194

VS231

VS252

VS551

VS661

VS711

ODU271

VS254

VS721

Part numbers: SFP-TV-1470-C

SFP-TV-1530-C

SFP-TV-1570-C

SFP-RV-PIN (270)

SFP-TV-1490-C

SFP-TV-1550-C

SFP-TV-1590-C

SFP-RV-APD (1485)

SFP-TV-1510-C

SFP-TV-1550-SD

SFP-TV-1610-C

270Mbps full duplex video signals Available for

VS231-OO

Part numbers: SFP-TRV-1310-PIN-SF SFP-TRV-1470-PIN-C SFP-TRV-1550-PIN-C SFP-TRV-1550-PIN-SD SFP-TRV-1490-PIN-C SFP-TRV-1570-PIN-C

SFP-TRV-1510-PIN-C SFP-TRV-1590-PIN-C

SFP-TRV-1530-PIN-C SFP-TRV-1610-PIN-C

1485Mbps full duplex video signals Available for

VS251

VS252

VS254

Part numbers: SFP-TRV-1310-APD-SD SFP-TRV-1470-APD-C SFP-TRV-1550-APD-C SFP-TRV-1550-APD-SD SFP-TRV-1490-APD-C SFP-TRV-1570-APD-C

SFP-TRV-1510-APD-C SFP-TRV-1590-APD-C

SFP-TRV-1530-APD-C SFP-TRV-1610-APD-C

3Gbps simplex signals Available for

VS411

VS811

Part numbers: SFP-T3-1310-S

SFP-T3-1510-C

SFP-T3-1550-S

SFP-T3-1610-C

SFP-T3-1470-C

SFP-T3-1530-C

SFP-T3-1570-C

SFP-R3-APD

SFP-T3-1490-C

SFP-T3-1550-C

SFP-T3-1590-C

1Gbps full duplex signals Available for

VS722

Part numbers: SFP-TR1-1310-PIN-S

SFP-TR1-1510-PIN-C SFP-TR1-1570-PIN-C

SFP-TR1-1550-PIN-S

SFP-TR1-1530-PIN-C SFP-TR1-1590-PIN-C

SFP-TR1-1470-PIN-C SFP-TR1-1550-PIN-C SFP-TR1-1610-PIN-C SFP-TR1-1490-PIN-C

network-electronics.com

| 77

PLUS

1.2 Monitoring and Test System FCS1000

DVB-ASI/SDI Monitoring and Test System

FCS100 provides a high-density, cost-effective QoS monitoring solution.

Each input has a 270Mbps interface, allowing monitoring of either DVB-ASI signals or serial digital video signals. Service management is provided via an embedded PC-based processor which provides a full Simple network management Protocol (SNMP) interface and Web browser display. All alarm conditions can be mapped into SNMP traps as well as individual GPI outputs for local alarms.

• In-service monitoring for up to 16 channels in 1RU • DVB-ASI or SMPTE 259 SDI capable • Checking of all DVB input streams to ETR 101 290 • Checking to SMPTE RP165 on SDI input streams • High-impedance passive ‘BNC Tee’ for each channel • Comprehensive SNMP traps and informs • Separate GPI contact alarms for each channel • Full internal diagnostics • ASI stream handling from 16Kbps–216Mbps • 10/100baseT Ethernet management port • Serial port communications for local diagnostics and ISDN/PSTN adapters • Powerful alarm filtering and logging • QoS profile presets and weekly scheduling • Remote uploads of new schedules and firmware upgrades

78 | network-electronics.com

PLUS

Monitoring and Test System

1.2

FCS1000

DVB-ASI/SDI Monitoring and Test System

OPERATION Browser based, multi-channel, menu-driven QoS monitoring system.

Configurable for SDI or ASI in groups of four. A set-up screen for each group of four allows for detailed monitoring from top level alarms and faults, right down to fine-grain details of SMPTE RP165 or ETR 101290.

Up to four different program profiles can be pre-loaded for each channel and a scheduler screen allows for one full week of profile scheduling.

An alarm conditioning/filtering/logging screen provides for alarm persistence and hold time filtering as well as criticality assignment and threshold settings. Individual channel SNMP informs are generated and sent based on the settings of this screen.

DVB-ASI Monitoring SMPTE 259M SDI Monitoring ETR 101 290 SMPTE RP165 Signal present Signal present TS sync loss EDH–Missing TS sync byte errors EDH–Packet error PAT error Active Picture (AP) EDH error here Continuity count error AP error detected already PMT error AP unknown error status PID error Full Field (FF) error detected here PCR error / accuracy FF error detected already CAT error FF unknown error status NIT error Ancillary (ANC) error detected here SDT error ANC error detected already EIT error ANC unknown error status RST error Other alarms TDT error Video black RS FEC Error Freeze frame Continuity count Audio (group error, silence, phase and overload)

Power and Environmental Power Automatic 110~240 V AC, IEC connector Power Consumption 0.15A , 240VAC, <35W Cooling Forced via side intake and exhaust vents Operating Temperature Between 0 °C and 50 °C Operating Humidity 10% to 90% (non-condensing)

Element management Features SNMP and Web browser interfaces that provide monitoring and/ or configuration of the status, alarms and controls. Some of the features are: - SNMP V2c ready - Telnet based remote and secure login - Remote firmware downloads

Connector Types Ethernet Telnet Remote Linux system configuration FTP Firmware downloads HTTP Web browser access SNMP Element management Connector RJ45 10Mbps No. of Connectors Single access (16 channels) Password Levels Administrator/User Operating Systems Windows 98, 2000 Pro, XP Pro and Linux Web browser Internet Explorer 6.0 Netscape Navigator 7.2 RS232 / EIA232 For Linux System configuration (two connectors, front and rear access) Connector DB9 (male) No. of Connectors 2 Baud Rate Up to 115200, 1 stop bit, 8 data bits, no parity GPIO To interface Ventura chassis with user’s equipment Connector DSUB-25 pin No. of Connectors 1, with 16 TTL compatible I/O lines

Physical Width Height Depth Weight

Front panel: 19” EIA standard (483mm) (exc. rack ears: 440m) 1.7” (43mm), 1RU 19” (484mm) (including rear connectors) 11lbs. (5kg) (6kg with delivery packing)

Ordering Options FCS1000

Focus monitoring and test system

network-electronics.com

| 79

PLUS

1.2 Point-to-Point Fiber Optic Transport TV-1 PLUS

Multi-Format Video & Audio Fiber Optic Link with Jitter Removal

• NTSC/PAL/PAL-M/PAL-N, SDI or ASI, plus audio transport in a single 1RU chassis • Signal-to-noise ratios in excess of 73dB • 12-bit analog video encoding • SNMP Element Management via 10-BaseT Ethernet interface • Locked selection of chosen tariff • Exceeds 250C Short Haul Specifications • 4 audio channels of input: 2 AES signals of 2 channels each or 4 analog audio channels or 1 AES signal and 2 analog audio channels • Selectable re-sampled or non re-sampled AES modes • Supports SMPTE 272M asynchronous (resampled) and synchronous (non-resampled) • 48 kHz insertion • Removal of SDI timing and alignment jitter • Automatic EDH correction and/or insertion • Indicators/external alarms for loss of carrier & audio

80 | network-electronics.com

PLUS

Point-to-Point Fiber Optic Transport

1.2

TV-1 PLUS STANDARDS / COMPLIANCE DIGITAL VIDEO SDI SMPTE 259M SDTI SMPTE 305M DVB-ASI EN50083-9 DIGITAL AUDIO AES/EBU AES-1992 & Dolby E Embedding Acc. to SMPTE 272M

ANALOG VIDEO and AUDIO NTSC Exceeds RS250C short haul NTSC Exceeds Telcordia GR338-CORE PAL Exceeds ITU-R624-4 and CCIR 567 SNR in excess of 73dB

COMPLIANCE Designed for NEBS Level 3 Compliance Safety UL,CSA, CE EMC FCC Class A, CE

ANALOG VIDEO Qty TX*

1 input plus 1 loop through plus 1 front panel monitor of input Qty RX* Duplicate outputs plus 1 front panel monitor of output Connector type 75Ω BNC floating CMMR >60dB @ 60Hz Return Loss >30dB Cable EQ >130m (Belden 8281) Quantization 12 bits Signal-to-Weighted-Random Noise Ratio (10kHz to 4.2 MHz) 73dB

ANALOG AUDIO Qty TX* Qty RX* Connector Type Level

4 inputs plus 4 front panel monitors of inputs Duplicate outputs plus 4 front panel monitors of outputs 600ohm Phoenix balanced FS + 18dBu @ 600ohm

OPTICAL CONFIGURATION OF SERVICE SERVICE SELECTION SWITCH Location On TX front panel Switch type Rotary switch Termination 75ohm termination switch for NTSC/PAL/ PAL-M video (on/off) Different combinations of video and audio can be set using either Element Management or the front panel rotary switch settings as listed:

TX Output Power -2dBm (+/- 1dB) Wavelength 1310nm or CWDM Optical Receiver 1200nm to 1600nm RX Sensitivity <-32dBm (10E-9 EDH) Overload <–1dBm (10-9 EDH) Connectors SC/PC NOTE: *Video can be either digital or analog. Audio can be a total of two stereo’s with any mix of analog and digital or analog only or digital only.

ALARM MANAGEMENT

JITTER MANAGEMENT JITTER TOLERANCE JITTER TRANSFER

>4UI in the range of 10Hz to 10kHz >0.25UI in the range of 1MHz to 5MHz >20dB attenuation at jitter frequency > 1kHz

PHYSICAL INTERFACES DIGITAL VIDEO Qty TX* Qty RX* Connector type Signal level Return Loss Cable EQ

1 input plus 1 front panel monitor of input 1 input plus 1 front panel monitor of input 75Ω BNC 800mV (pk-pk) >15dB >300m (Belden 8281)

DIGITAL AUDIO Qty TX* Qty RX* Connector Type

2 AES Inputs Duplicate outputs plus front panel monitors of outputs 110Ω Phoenix balanced

FRONT PANEL LEDs Loss of video Yellow (or off) SDI detect Green (or off) ASI detect Green (or off) NTSC/PAL detect Green (or off) Loss of audio Yellow (or off) An audio 1 detect Green (or off) An audio 2 detect Green (or off) AES 1 detect Green (or off) AES 2 detect Green (or off) Power/Fan Red / Green Laser alarm (TX) Red (or off) Optical alarm (RX) Red / Yellow Alarm data is also accessible via a single Phoenix 3-pin male connector located on the rear of each chassis (TX and RX).

SNMP Element management SNMP Element Management is provided via an Ethernet interface (10-BaseT) located on the rear of each chassis. This enables remote configuration and monitoring of alarms through a third party element management system or using VPG’s GUI.

POWER / ENVIRONMENTAL Voltage Redundancy Power TX/RX Current Operating temp Storage temp Humidity

90-254VAC, 50Hz/50Hz Dual PSU’s, each fused separately <20W 1.5Amps 0 °C to +50 °C -40 °C to +80 °C 10% - 90% RH, non-condensing

PHYSICAL Dimensions Weight

1RU rack mount (1.75”Hx 19”W x 14”D) 10 lbs

ORDERING OPTIONS TV-1 PLUS TX: 1RU Encoder/Transmitter TV-1 PLUS RX: 1RU Receiver/Decoder Link with Jitter Removal

network-electronics.com

| 81

PLUS

1.2 Point-to-Point Fiber Optic Transport TV-C PLUS

MPEG 2 Encoder and Decoder NTSC/PAL/SDI + Audio to ASI/DS3/100BaseT Network Interfaces

• NTSC/PAL composite or SDI inputs and outputs • Eight independent channels of analog audio or four AES/EBU • Video and audio gain and cable EQ adjust at all analog I/Os • Supports pre-embedded or locally embedded audio • DVB-ASI, DS3 and 10/100 Base-T interfaces • Video and audio test pattern generators for built-in automated testing of equipment and link • Full VBI support • 4:2:2 P at ML with transport stream of up to 50Mbps • 4:2:0 support with transport streams of up to 25Mbps • Simple GOP structure configuration through element management GUI • Intuitive front panel, easy-to-navigate LCD menu with push button controls • AC and DC power options with optional redundancy

82 | network-electronics.com

PLUS

Point-to-Point Fiber Optic Transport

1.2

TV-C PLUS Operation

Decoder Outputs-Video

The TV-C PLUS MPEG-2 encoder and decoder products are designed with the exacting needs of the telecom service provider in mind. The product addresses the fact that most service providers are operating in an environment where NTSC/PAL and analog audio and SDI and AES are all widely used, often by the same customer who is interconnecting digital and analog islands. The TV-C PLUS can be configured to seamlessly bridge these worlds at any desired quality level with full MP at ML and 4:2:2 P at ML support. Ease-of-use features like built-in test generators and readily accessible equalization and gain adjustments provides the operator fast and easy ways to set up and configure the equipment in non-ideal environments. Also, by providing ASI, Ethernet and DS3 network interfaces the service provider can directly use the equipment in most applications.

Compression/De-Compression Video Format MPEG-2 (ISO/IEC 13 818-2) Profile 422P at ML or MP at ML GOP Adjustable Bit rate Delay

From 1,5Mbps to 50Mbps <140ms

Audio Format Mode Bit rate

MPEG-1 Layer II (ISO/IEC 11172-3) Stereo, Joint Stereo, Mono, Dual Mono From 64 to 384Kbps

Encoder Inputs – Video Analog System specifications Number of inputs Impedance Nominal level Bandwidth S/N Lum Wt. Cable Eq

PAL/NTSC (ITU R-BT 470.RS250-C) 1 75 ohm 1Vpp >5MHz >68dB (Profile dependent) >100m

Digital Format Cable Eq

SDI 4:2:2 (625/625) (ITU-R 656) >250m Belden 8281

Other Vertical Blanking Interval (VBI) transport is fully supported by stripping the VBI lines at the transmit end, multiplexing them uncompressed for transport and re-inserting at the receive end into the reconstituted video signal.

An SDI pattern generator is also built into the encoder and can be switched in to the processing chain ahead of the compression engine thereby providing end-to-end quality testing of the entire compression, transport and decompression process.

Encoder Inputs – Audio Analog Number of inputs Up to 8 independent channels Connector type Phoenix 3-pin Impedance 600 ohm or Hi-Z S/N (TX to RX) > 80dB rms, > 62dB Digital System specification AES-3 Connector type Three, Phoenix Impedance 110 ohm, Balanced Sample frequency 32, 44.1, 48Khz

Analog System specifications Number of inputs Impedance Nominal level Bandwidth S/N Lum Wt. Cable Eq

PAL/NTSC (ITU R-BT 470.RS250-C) 1 75 ohm 1Vpp >5MHz >68dB (Profile dependent) >100m

Digital Format

SDI 4:2:2 (625/625) (ITU-R 656)

Decode Outputs – Audio Analog Number of outputs Up to 8 independent channels Connector type Phoenix 3-piin Impedance 600 ohm or Lo-Z S/N (TX to RX) > 80dB rms, > 62dB Digital System Specification AES-3 Connector type Three, Phoenix Impedance 110 ohm, Balanced Sample frequency 32, 44.1, 48Khz

Network Interfaces Encoder/Decoder Formats ASI EN 50083-9 E3 G.751 DS-3 G.751, C-Bit Parity or M-Frame* 10/100BaseT UDP/RTP, Unicast and Multicast

Management and Control Both encoder and decoder can be configured via front panel push buttons and LCD display.

The main status, control and alarm interfaces are through an RS-232 port and an RJ-45 10 BaseT port on the rear panel of each unit.

Physical and Environmental The TV-C PLUS is fitted with both AC plus DC power supplies. Redundancy is enhanced through unique cross coupling of DC inputs and outputs when two or more units are present.

Power consumption <25 Watts per unit Operating temp 0 ˚C to 50 ˚C ambient Storage temp –40 ˚C to +85 ˚C Relative humidity 5% to 85% Agency compliance Safety UL, CSA, CE Low Voltage Directive EMC FCC Part 15 Class A, CE EMC Directive

Ordering Information VPG TV-C PLUS – ENC Encoder VPG TV-C PLUS – DEC Decoder

Other Audio may also be carried pre-embedded in the SDI stream. If configured to do so, this audio will be de-embedded and processed by the encoder.

An on-board tone generator is also present that can be enabled for link and audio processing verification.

network-electronics.com

| 83

BRAVONET

1.3 Chassis and Power Supply VPG6200

2RU Modular Universal Chassis • Chassis design supports two modules for low density applications • Symmetrical architecture for slot independence • Mid-plane design enables mix-and-match of modules and connections • Chassis accepts any audio/video transport module designed for the BRAVOnet™ product line • Redundant AC or DC power supply system with load-sharing • Built-in fiber management • Element management module is mounted on the power supply, saving a chassis slot

Power Supply System AC DC Input voltage options 108-250VAC -48VDC Input AC frequencies 46-63Hz Power consumption <30W per module (fully configured) Additional features Power supplies are dual redundant, load-sharing

Environmental/Compliance Operating temperature 0 °C to +50 °C Storage temperature -10 °C to +70 °C Humidity 20%–80%, non-condensing EMC compliance FCC, CE Safety compliance UL, CSA, CE

Element Management Optional module can be attached to power supply (does not consume a CODEC slot). This optional card supports two functional module slots.

Its RS-232 interface may be chained to support up to 32 chassis. ASCII command-line interface is provided for ease of use. Consult the VPG Element Management System data sheet for further information on element management software capability.

84 | network-electronics.com

Advanced Element Management Optional module can be attached to power supply (does not consume a CODEC slot). This optional card supports two functional module slots.

Its browser user interface allows for ease of use. MIB tables available for integration within SNMP compliant systems.

Monitoring Status, control, and alarm messages can be sent to the element management software. These messages include chassis-specific information:

Status Module present/absent Option(s) present/absent Module location/ID/serial number Control Set module location/ID Alarm Module fail Over-temperature

ORDERING INFORMATION Contact factory for ordering information.

BRAVONET

Chassis and Power Supply

1.3

VPG6000

5RU Modular Universal Chassis System • Symmetrical architecture for slot independence • Mid-plane design enables mix-and-match of modules and connections • Chassis accepts up to six standard audio/video transport modules designed for the BRAVOnet™ product line • Redundant AC or DC power supply system with load-sharing and supply line redundancy • Element management module is mounted on the power supply, saving a chassis slot • Chassis-mounted wavelength division multiplexer for two or four wavelength systems

Power Modules

Signal Modules

Net Mgmt Module

Backplane Power Bus Network Management Bus Connector Panels

Power Inputs

Signal I/Os

Network Management I/O

Element Management Optional module can be attached to power supply (does not consume a CODEC slot). Its RS-232 interface may be chained to support up to 32 chassis. ASCII command line interface is provided for ease of use. Consult the VPG Element Management System data sheet for further information on element management software capability.

Ordering Information Chassis VPG6000CH-03 VPG6000CH-05

5RU universal modular chassis with heat deflector/fan assembly 5RU universal modular chassis with heat deflector/fan assembly, For use with RJ-45 port ANM element manager.

Advanced Element Management Optional module can be attached to power supply (does not consume a CODEC slot). This optional card supports two functional module slots.

Its browser user interface allows for ease of use. MIB tables available for integration within SNMP compliant systems.

Power Supply System AC DC Input voltage options 108-132VAC -24VDC 210-250VAC -48VDC Input AC frequencies 46-63Hz Power consumption <30W per module (fully configured) Chassis capacity 180W, max.

Additional features Power supplies are dual-redundant, loadsharing and hot-swappable

Power Supplies and Accessories VPG6000AC Power Supply VPG6000-120 115VAC, nom.

VPG6000-120-NM 115VAC + Net Man card, nom.

VPG6000-120-ANM 115VAC + Net Man card, nom.

VPG6000DC Power Supply VPG6000-48 -48VDC VPG6000-48-NM -48VDC + Net Man card VPG6000-48-ANM -48VDC + Net Man card 6000CH Filler Panels VPG6000FP-1 I/O module one-slot filler panel kit VPG6000FP-3 I/O module three-slot filler panel kit VPG6000FP-PS PSU slot filler panel kit

Environmental/Compliance Operating temperature 0 °C to +50 °C Storage temperature -10 °C to +70 °C Humidity 20%–80%, non-condensing EMC Compliance FCC, CE Safety Compliance UL, CSA, CE

network-electronics.com

| 85

BRAVONET

1.3 Element Management FCS6000 AEMS

FCS6000 AEMS (Advanced Element Management System)

VPG Advanced Element Management System Back plane

FCS6000-AEMS Front Panel LEDs and RJ-45

Linux based single board computer 32-bit SoC 100MIPS

Connector panel

Ethernet Transformer

RJ-45

PC and Alarm Processing

IDC-50

Serial Ports

RS232 (x2)

128Mb Flash

DIP Switch

64Mb SDRAM Programmable General Purpose I/O

GPIO (8 I/Os)

Power Conversion

The FCS6000 AEMS is a Linux-based element management card managing the BRAVOnet series cards. It acts as an SNMP agent for all cards in the shelf, controls and configures them using a Web browser and stores all the data in Flash (buffer) memory. The FCS6000 AEMS can be configured to control other cards using a remote and secure Telnet session.

The FCS6000 AEMS is located within a power supply slot and is unobtrusive in installing or uninstalling and acts automatically as soon as a new card is inserted in one of the slots in the shelf. It uses residual power to save the data and shuts down in a controlled manner.

• Automatic recognition, control and operation of line cards • Web browser and SNMP based monitoring and controlling • Remote firmware download using remote and secure Telnet session • Date time stamped history and data recording in Flash memory (buffer) • Chassis Environment reporting using temperature and fan speed sensor (LED indicators) • On-board Microprocessor details: 100MIPS, 32-bit RISC based SoC, External 128Mb flash and 64Mb SDRAM • Safe operation transfer to updated firmware (starts using new firmware after validation) • Linux-based system • User definable alarms based on priority (major, minor or no alarm)

FANS P O W E R

P O W E R

# 2

# 1

A E M S

S L O T

S L O T

S L O T

S L O T

S L O T

S L O T

# 1

# 2

# 3

# 4

# 5

# 6

VPG6000 chassis

86 | network-electronics.com

PC Lines and Alarms

BRAVONET

Element Management

1.3

FCS6000 AEMS

SNMP agent #1 SNMP manager #1

SNMP agent #N

Get, Set

Network

Inform SNMP manager #N

Get, Set Inform

BRAVOnet AEMS SNMP agent

Web browser Web browser Web server #X

Web manager #X

FCS6000 AEMS as snmp agent A single FCS6000 AEMS acts as the proxy agent for up tp 9 Ventura Line Cards, 2 power supplies and the fan assembly placed in the VPG6000 Chassis.

Element management Features SNMP and Web browser interfaces that provide monitoring and/ or configuration of the status, alarms and controls for BRAVOnet Series cards installed in a VPG6000 chassis. Some of the features are given below: -SNMP V2c ready -Telnet based remote and secure login -Remote firmware downloads

AEMS System location Mechanically mounted on Power Supply #1 providing electrical connection to back plane of chassis. Does not consume a VPG6000 slot.

Environmental/Compliance Operating temperature 0 °C to + 50 °C Storage temperature –10 °C to + 70 °C Humidity 20%–80%, non-condensing EMC Compliance FCC, CE Safety Compliance UL, CSA, CE

Connector Types Ethernet Telnet Remote Linux system configuration FTP Firmware downloads HTTP Web browser access SNMP Element Management Connector RJ45 10/100 Mbps No. of Connectors Single access rear interface Password Levels Administrator/User Operating Systems Windows 98, 2000 Pro, XP Pro and Linux Web browser Internet Explorer 6.0 Netscape Navigator 7.2 Mozilla Firefox 1.0 (Newer version supported)

RS232 / EIA232 (For Linux System configuration) Connector DB9 (male) No. of Connectors 2 Baud Rate Up to 115200, 1 stop bit, 8 data bits, no parity

GPIO To interface Ventura chassis with User’s Equipment Connector Micro-D 9-pin No. of Connectors 1, with 8 user configured, TTL compatible I/O lines

Ordering Options FCS6000 AEMS Advanced Element Management System card GPIO Cable FCS6000 AEMS general purpose input/ output card connector cable

network-electronics.com

| 87

BRAVONET

1.3 Monitoring and Test System FCS1000

DVB-ASI/SDI Monitoring and Test System

FCS100 provides a high-density, cost-effective QoS monitoring solution.

Each input has a 270Mbps interface, allowing monitoring of either DVB-ASI signals or serial digital video signals. Service management is provided via an embedded PC-based processor which provides a full Simple network management Protocol (SNMP) interface and Web browser display. All alarm conditions can be mapped into SNMP traps as well as individual GPI outputs for local alarms.

• In-service monitoring for up to 16 channels in 1RU • DVB-ASI or SMPTE 259 SDI capable • Checking of all DVB input streams to ETR 101 290 • Checking to SMPTE RP165 on SDI input streams • High-impedance passive ‘BNC Tee’ for each channel • Comprehensive SNMP traps and informs • Separate GPI contact alarms for each channel • Full internal diagnostics • ASI stream handling from 16Kbps–216Mbps • 10/100baseT Ethernet management port • Serial port communications for local diagnostics and ISDN/PSTN adapters • Powerful alarm filtering and logging • QoS profile presets and weekly scheduling • Remote uploads of new schedules and firmware upgrades

88 | network-electronics.com

BRAVONET

Monitoring and Test System

1.3

FCS1000

DVB-ASI/SDI Monitoring and Test System

OPERATION Browser based, multi-channel, menu-driven QoS monitoring system.

Configurable for SDI or ASI in groups of four. A set-up screen for each group of four allows for detailed monitoring from top level alarms and faults, right down to fine-grain details of SMPTE RP165 or ETR 101290.

Up to four different program profiles can be pre-loaded for each channel and a scheduler screen allows for one full week of profile scheduling.

An alarm conditioning/filtering/logging screen provides for alarm persistence and hold time filtering as well as criticality assignment and threshold settings. Individual channel SNMP informs are generated and sent based on the settings of this screen.

DVB-ASI Monitoring SMPTE 259M SDI Monitoring ETR 101 290 SMPTE RP165 Signal present Signal present TS sync loss EDH–missing TS sync byte errors EDH–packet error PAT error Active picture (AP) EDH error here Continuity count error AP error detected already PMT error AP unknown error status PID error Full field (FF) error detected here PCR error / accuracy FF error detected already CAT error FF unknown error status NIT error Ancillary (ANC) error detected here SDT error ANC error detected already EIT error ANC unknown error status RST error Other alarms TDT error Video black RS FEC Error Freeze frame Continuity count Audio (group error, silence, phase and overload)

Power and Environmental Power Automatic 110~240 V AC, IEC connector Power Consumption 0.15A , 240VAC, <35W Cooling Forced via side intake and exhaust vents Operating Temperature Between 0 °C and 50 °C Operating Humidity 10% to 90% (non-condensing)

Element management Features SNMP and Web browser interfaces that provide monitoring and/ or configuration of the status, alarms and controls. Some of the features are: - SNMP V2c ready - Telnet based remote and secure login - Remote firmware downloads

Connector Types Ethernet Telnet Remote Linux system configuration FTP Firmware downloads HTTP Web browser access SNMP Element management Connector RJ45 10Mbps No. of Connectors Single access (16 channels) Password Levels Administrator/User Operating Systems Windows 98, 2000 Pro, XP Pro and Linux Web browser Internet Explorer 6.0 Netscape Navigator 7.2 RS232 / EIA232 For Linux System configuration (two connectors, front and rear access) Connector DB9 (male) No. of Connectors 2 Baud Rate Up to 115200, 1 stop bit, 8 data bits, no parity GPIO To interface Ventura chassis with user’s equipment Connector DSUB-25 pin No. of Connectors 1, with 16 TTL compatible I/O lines

Physical Width Height Depth Weight

Front panel: 19” EIA standard (483mm) (exc. rack ears: 440m) 1.7” (43mm), 1RU 19” (484mm) (including rear connectors) 11lbs. (5kg) (6kg with delivery packing)

Ordering Options FCS1000

Focus Monitoring and Test System

network-electronics.com

| 89

BRAVONET

1.3 ASI Multiplexer/Network Adapter VPG9155

STM-1/OC-3 DVB-ASI TS Multiplexer – Bandwidth Optimizer

The VPG9155 MUX/DEMUX interoperates with other VPG products to form a layered approach to multiplexing and network interfacing ranging from E3/DS-3, OC-3, to OC-12 rates. With the most efficient use of bandwidth available, these products are designed to squeeze the maximum number of channels into a given capacity. The VPG9155 manages, controls and protects each TS individually, enabling multiple customers to be served on a single 155Mbps or 140Mbps carrier.

• Multiplexes four DVB-ASI inputs into one OC-3/STM-1/STS-3 (155Mbps) or E4 (140Mbps) output • Maximizes ASI payload capacity (up to 148Mbps over a 155Mbps network) • Inputs can be switched to any output • Used with VPG 6000/6200 chassis systems under standard or AEMS (Advanced Element Management System) • Individual channel bandwidth ceiling provides total control over capacity available to client (to a resolution of 0.1Mbps per TS) • DVB validity check (PID, PAT, PMT, ES and SES) • Reed-Solomon FEC can be applied to each ASI TS for reliable MPEG-2 transmission • Each input TS is assigned conditional access codes (2 layers) for secure content delivery

90 | network-electronics.com

BRAVONET

ASI Multiplexer/Network Adapter

1.3

VPG9155

MUX – INPUT SIGNALS Input signal type

Maximum Payload E4 (140Mbps) OC-3/STM-1 Number of inputs Input/output levels Input impedance Output impedance Cable equalizer (max) ASI*

MUX ALARMS (set as either; none, major or minor) 270Mbps DVB-ASI–EN50083-9 or ASI*, containing data from 800kbps up to 148Mbps 135Mbps 148Mbps 4 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 200m of Belden 8281 cable Submux ASI Packets 192/208 bytes

MUX – OUTPUT SIGNALS Output signal type

Number of outputs Input/output levels (elec) Input impedance (elec) Output impedance (elec) Optical

155Mbps–OC-3c / STM-1 155Mbps–STS-3 (electrical) 140Mbps–E4-G.703 (electrical) 1 x optical (STM-1 / OC-3) plus 2 x electrical (STS-3 / E4) 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 1310nm /1550nm single-mode (launch power -3dBm min)

DEMUX – INPUT SIGNALS Input signal type

Number of inputs Optical

155Mbps–OC-3c / STM-1 155Mbps–STS-3 (electrical) 140Mbps–E4-G.703 2 x electrical (STS-3 / E4) plus 1 x optical (STM-1 / OC-3) PINFET (-32bBm sensitivity)

DEMUX – OUTPUT SIGNALS Output signal type Number of outputs Input/output levels Input impedance Output impedance Cable equalizer (max)

270Mbps DVB-ASI–EN50083-9 4 x 270Mbps plus 2 x loop-through STS-3 / E4 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 200m of Belden 8281 cable

Power Consumption/ Environmental VPG9155TX/RX Operating temperature Storage temperature Humidity

Card fail Card fault Laser fail Optical module fault Input loss Ch 1 to 4–no input Input rate violation Ch 1 to 4–allowable input bit rate exceeded Configuration error Wrong input type selected DVB error Channel 1 to 4–RS, PID, PAT, PMT, SES or ES errors

DEMUX CONTROLS Standby protection switch Enable or disable automatic network standby switching Optical loss only switch Enable or disable switching to main electrical input when optical input is lost Switch persistence Error persistence to enable protection switch to operate Input mode Selects network interface type Mode selected Electrical or optical BER threshold Sets BER alarm threshold Non-Consec. error Network error threshold Channel ID codes Ch 1 to 4–Sets each TS’s conditional access codes (2)

DEMUX ALARMS (set as either; none, minor or ­­major) Card fail Card fault Optical loss Input power threshold too low Input loss Loss of frame alignment Configuration error Ch 1 to 4–Error in data type or conditional access code Input errors Ch 1 to 4–Rate exceeds programmed thresholds Standby input selected Standby network input is being used by DEMUX DVB error Channel 1 to 4–RS, SES errors

ORDERING INFORMATION VPG9155RX-00 ASI DeMux, STS-3 VPG9155RX-OE ASI DeMux, STS-3 + STM-1/OC-3c Pinfet receiver VPG9155TX-00 ASI Mux, STS-3 VPG9155TX-SFP-EO ASI DeMux, STS-3 + STM-1/OC-3c laser Please refer to the SFP Options data sheet for SFP selection.

<20W (All options) 0 °C to + 50 °C -10 °C to + 70 °C 20%–80% RH, non-condensing

Element Management / Alarms MUX CONTROLS Input rate setting Ch 1 to 4–Input bit rate ceiling, set to a resolution of 0.1Mbps RS FEC Ch 1 to 4–Add / don’t add DVB checking Ch 1 to 4–Check for PID, PAT, PMT, SES or ES errors DVB error threshold Sets thresholds for alarms Output mode Selects network interface type Optical Laser On or Off (where fitted) Channel ID codes Ch 1 to 4–Sets each TS’s conditional access codes (2)

network-electronics.com

| 91

BRAVONET

1.3 ASI Multiplexer/Network Adapter VPG9345

DS3/E3 DVB-ASI TS Multiplexer – Bandwidth Optimizer

The VPG9345 MUX/DEMUX is one of many DVB-ASI and SDI networking products in the VPG9500 series. These products form a layered approach to multiplexing and network interfacing from E3/DS-3, OC-3, to OC-12 rates. With the most efficient use of bandwidth available, these products are designed to squeeze the maximum number of channels into a given capacity.

Designed with the service provider in mind, the VPG9345 manages, controls and protects each TS individually, enabling multiple customers to be served on a single 34Mbps or 45Mbps circuit.

• Multiplexes four DVB-ASI inputs into one DS3 (45Mbps) or E3 (34Mbps) output • Maximizes ASI payload capacity (up to 43.8Mbps over a 45Mbps network) • Inputs can be switched to any output • Individual channel bandwidth ceiling provides total control over capacity available to client (to a resolution of 0.1Mbps per TS) • DVB validity check (PID, PAT, PMT, ES and SES) • Reed-Solomon FEC can be applied to each ASI TS for reliable MPEG-2 transmission • Each input TS is assigned conditional access codes (2 layers) for secure content delivery

92 | network-electronics.com

BRAVONET

ASI Multiplexer/Network Adapter

1.3

VPG9345

MUX – INPUT SIGNALS Input signal type

Maximum Payload Number of inputs Input/output levels Input impedance Output impedance Cable equalizer (max) ASI*

270Mbps DVB-ASI–EN50083-9 or ASI*, containing data from 800kbps up to 43.8Mbps DS3 43.8Mbps E3 33.9Mbps 4 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 200m of Belden 8281 cable Submux ASI Packets 192/208 bytes.

MUX – OUTPUT SIGNALS Output signal type Number of outputs Input/output levels (elec) Input impedance (elec) Output impedance (elec) Optical

45Mbps–DS3 (B3ZS) 34Mbps–E3 (HDB3) 2 x electrical plus 1 x optical (where fitted) 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 1310nm / 1550nm single-mode (launch power -3dBm min) CWDM or DWDM

DEMUX – INPUT SIGNALS Input signal type Number of inputs Optical (optional)

45Mbps–DS3 (B3ZS) 34Mbps–E3 (HDB3) 2 x electrical plus 1 x optical (where fitted) PINFET (-32dBm sensitivity)

DEMUX – OUTPUT SIGNALS Output signal type Number of outputs Input/output levels Input impedance Output impedance Cable equalizer (max)

270Mbps DVB-ASI–EN50083-9 4 x 270Mbps plus 2 x loop-through DS3 / E3 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 200m of Belden 8281 cable

Power Consumption/Environmental VPG9345TX/RX Operating temperature Storage temperature Humidity

<20W (All options) 0 °C to + 50 °C -10 °C to + 70 °C 20%–80% RH, non-condensing

Element Management/Alarms MUX CONTROLS Input rate setting Ch 1 to 4–Input bit rate ceiling, set to a resolution of 0.1Mbps RS FEC Ch 1 to 4–Add / don’t add DVB checking Ch 1 to 4–Check for PID, PAT, PMT, SES or ES errors DVB error threshold Sets thresholds for alarms Output mode Selects network interface type Optical Laser On or Off (where fitted) Channel ID codes Ch 1 to 4–Sets each TS’s conditional access codes (2)

MUX ALARMS (set as either; none, major or minor) Card fail Card fault Laser fail Optical module fault Input loss Ch 1 to 4–no input Input rate violation Ch 1 to 4–allowable input bit rate exceeded Configuration error Wrong input type selected DVB error Channel 1 to 4–RS, PID, PAT, PMT, SES or ES errors

DEMUX CONTROLS Standby protection switch Enable or disable automatic network standby switching Optical loss only switch Enable or disable switching to main electrical input when optical input is lost Switch persistence Error persistence to enable protection switch to operate Input mode Selects network interface type Mode selected Electrical or optical BER threshold Sets BER alarm threshold Non-Consec. error Network error threshold Channel ID codes Ch 1 to 4–Sets each TS’s conditional access codes (2)

DEMUX ALARMS (set as either; none, minor or ­m ajor) Card fail Card fault Optical loss Input power threshold too low Input loss Loss of frame alignment Configuration error Ch 1 to 4–Error in data type or conditional access code Input errors Ch 1 to 4–Rate exceeds programmed thresholds Standby input selected Standby network input is being used by DEMUX DVB error Channel 1 to 4–RS, SES errors

ORDERING INFORMATION Contact factory for ordering information.

network-electronics.com

| 93

BRAVONET

1.3 ASI Multiplexer/Network Adapter VPG9500

SDI/DVB-ASI TS Multiplexer – Sub-Multiplexer/Bandwidth Optimizer

The VPG9500 MUX/DEMUX interoperates with other VPG products to form a layered approach to multiplexing and network interfacing ranging from E3/DS3, OC-3 to OC-12 rates. With the most efficient use of bandwidth available, these products are designed to squeeze the maximum number of channels into a given capacity. The VPG9500 can be used as a companion card with the other family members performing the function of submultiplexing for ASI bandwidth optimizing or multiplexing into SDTI for adapting to fiber metropolitan or SDI long-distance networks.

• Multiplexes four DVB-ASI inputs into one 270Mbps ASI or SDTI (SMPTE 305) output • Mainly used as a Sub-Mux to increase the number of TS inputs to VPG9345, VPG9155 or VPG9555 • Inputs can be switched to any output • Used with VPG 6000/6200 chassis under standard or AEMS (Advanced Element Management System) • Each input TS can be up to 178Mbps • Individual channel bandwidth ceiling provides total control over capacity available to client (to a resolution of 0.1Mbps per TS) • DVB validity check (PID, PAT, PMT, ES and SES) • Reed-Solomon FEC can be applied to each ASI TS for reliable MPEG-2 transmission • Reed-Solomon checking for each input and output • Each input TS is assigned conditional access codes (2 layers) for secure content delivery

94 | network-electronics.com

BRAVONET

ASI Multiplexer/Network Adapter

1.3

VPG9500

MUX – INPUT SIGNALS Input signal type

Maximum Payload Number of Inputs Input/output levels Input impedance Output impedance Cable equalizer (max) ASI*

MUX ALARMS (set as either; none, major or minor) 270Mbps DVB-ASI–EN50083-9, or ASI*, containing data from 800kbps up to 178Mbps SDTI 178 ASI* 178 4 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 200m of Belden 8281 cable Submux ASI Packets 192/208 bytes

MUX –OUTPUT SIGNALS Output signal type Number of Outputs Input/output levels (elec) Input impedance (elec) Output impedance (elec) Optical ASI*

270Mbps ASI*, or SDTI plus optical (where fitted) containing data up to 179.5Mbps 2 x electrical plus 1 x optical (where fitted) 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 1310nm /1550nm single mode (launch power -3dBm min) Submux ASI Packets 192/208 bytes

DEMUX – INPUT SIGNALS Input signal type Number of Inputs Optical

270Mbps ASI*, or SDTI plus optical (where fitted) 2 x electrical plus 1 x optical (where fitted) PINFET (-32bBm sensitivity)

DEMUX – OUTPUT SIGNALS Output signal type Number of outputs Input/output levels Input impedance Output impedance Cable equalizer (max) ASI*

270Mbps DVB-ASI 4 x 270Mbps plus 2 x 270Mbps input loopthrough SDTI 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 200m of Belden 8281 cable Submux ASI Packets 192/208 bytes

Card fail Card fault Laser fail Optical module fault Input loss Ch 1 to 4–no input Input rate violation Ch 1 to 4–allowable input bit rate exceeded Configuration error Wrong input type selected DVB error Channel 1 to 4–RS, PID, PAT, PMT, SES or ES errors

DEMUX CONTROLS Standby protection switch Enable or disable automatic network standby switching Optical loss only switch Enable or disable switching to main electrical input when optical input is lost Switch persistence Error persistence to enable protection switch to operate Input mode Selects ASI or SDTI Mode selected Electrical or optical BER threshold Sets BER alarm threshold Non-Consec. error Network error threshold Channel ID codes Ch 1 to 4–Sets each TS’s conditional access codes (2)

DEMUX ALARMS (set as either; none, minor or ­m ajor) Card fail Card fault Optical loss Input power threshold too low Input loss Loss of frame alignment Configuration error Ch 1 to 4–Error in data type or conditional access code Input errors Ch 1 to 4–Rate exceeds programmed thresholds Standby input selected Standby 270Mbps input is being used by DEMUX DVB error Channel 1 to 4–RS, SES errors

ORDERING INFORMATION VPG-9500-TX ASI SubMux Card VPG-9500-RX ASI SubDeMux Card

Power Consumption/ Environmental VPG9500TX/RX Operating temperature Storage temperature Humidity

<20W (All options) 0 °C to +50 °C -10 °C to +70 °C 20%–80% RH, non-condensing

Element Management / Alarms MUX CONTROLS Input rate setting Ch 1 to 4–Input bit rate ceiling, set to a resolution of 0.1Mbps RS FEC Ch 1 to 4–Add / don’t add DVB checking Ch 1 to 4–Check for PID, PAT, PMT, SES or ES errors DVB error threshold Sets thresholds for alarms Output mode Selects ASI or SDTI Optical Laser On or Off (where fitted) Channel ID codes Ch 1 to 4–Sets each TS’s conditional access codes (2)

network-electronics.com

| 95

BRAVONET

1.3 ASI/SDI 270 Multiplexer/Network Adapter VPG9000

OC-12/STM-4 SDI/SDTI/DVB-ASI ATM Multiplexer

VPG9000 TX DVB-ASI Multi-Channel DS3 / E3 Telecom Adapter DVB-ASI Source DVB-ASI Source

Stream Processing Stream Processing

Multiplexer Processing and Output Formatting

Line 1 Line 2 OC-12/STM-4 Laser TX

STS-12C (Electrical)

OC-12C/STM-4

VPG9000 RX DVB-ASI Multi-Channel DS3 / E3 Telecom Adapter

STS-12C (Electrical)

OC-12C/STM-4 (Optical)

Line 1 (Main) Line 2 (Standby) PINFET RX

OC-12/STM-4

Demultiplexer Processing and Output Decoding

DVB-ASI Receiver DVB-ASI Receiver

The VPG9000 622Mbps SDH/SONET Video Multiplexer is a time division multiplexer that has been engineered to combine two 270Mbps video tributary signals onto an OC-12/STM-4 carrier. Each 270Mbps tributary may be formatted as an SDI, SDTI or DVB-ASI signal, enabling the simultaneous transport of multiple compressed and uncompressed digital video signals.

• Designed for transporting SDI video signals over a SONET/SDH infrastructure • Multiplexes two uncompressed 270Mbps • SMPTE 259M/ITU-R 601 feeds into 622Mbps • ATM compatible transport interface • Tributary interfaces allow remote fiber-optic or network connection to the backbone multiplexer • Accommodates all VPG audio and format conversion modules • Optional wavelength multiplexing permits up to four SDI signals on the same fiber • Advanced Element Management System with EDH support

96 | network-electronics.com

BRAVONET

ASI/SDI 270 Multiplexer/Network Adapter

1.3

VPG9000

GENERAL Input signal types

No. of channels

Advanced Element Management 270Mbps SDI (SMPTE 259M), SDTI (SMPTE 305M), or DVB-ASI (EN50083-9) Two

270Mbps Electrical (Coaxial) Input/output levels 800 mVpp, with loopthrough capability Input impedance 75 Ohm Output impedance 75 Ohm, dual outputs Cable equalizer max. lth.

300m of Belden 8281 cable 270Mbps Optical Wavelength Coding

1310nm or 1550nm Scrambled or non-scrambled

Fiber type Launched power Received sensitivity Maximum input

Singlemode -3dBm ±1dB -32dBm, typ.

–1dBm for 10-9 BER

External Network Reference Clock Consult factory for options.

Link Data rate 622.08Mbps Physical interfaces Electrical STS-12c compliant Optical OC-12c/STM-4 compliant

Ordering Information

Power Consumption VPG9000TX Optical Option

Status, control, and alarm messages can be sent to the element management software. These messages include: VPG9000TX Status Module present/absent Option(s) present/absent Module location/ID/serial number Control Set module location/ID Laser enable Enable/disable scrambling Alarm Loss of video input Video errors (EDH support) Module fail Optical source fault/bias deviation (link) Optical power fault/low light fault (SDI) VPG9000RX Status Module present/absent Option(s) present/absent Module location/ID/serial number Control Set module location/ID Laser enable Enable/disable descrambling Alarm Loss of link Video errors (EDH support) Module fail Optical power fault/low light fault (link) Optical source fault/bias deviation (SDI)

<25W <1W per module

VPG9000TX-00-21 ATM mux card, OC-12/STM-4 VPG9000RX-00-20 ATM demux card, OC-12/STM-4

Environmental/Compliance Operating temperature 0 °C to +50 °C Storage temperature -10 °C to +70 °C Humidity 20%–80% RH, non-condensing EMC Compliance FCC, CE Safety Compliance UL, CSA, CE

network-electronics.com

| 97

BRAVONET

1.3 ASI/SDI 270 Multiplexer/Network Adapter VPG9500

SDI/DVB-ASI TS Multiplexer – Sub-Multiplexer/Bandwidth Optimizer

The VPG9500 MUX/DEMUX interoperates with other VPG products to form a layered approach to multiplexing and network interfacing ranging from E3/DS3, OC-3 to OC-12 rates. With the most efficient use of bandwidth available, these products are designed to squeeze the maximum number of channels into a given capacity. The VPG9500 can be used as a companion card with the other family members performing the function of submultiplexing for ASI bandwidth optimizing or multiplexing into SDTI for adapting to fiber metropolitan or SDI long-distance networks.

• Multiplexes four DVB-ASI inputs into one 270Mbps ASI or SDTI (SMPTE 305) output • Mainly used as a Sub-Mux to increase the number of TS inputs to VPG9345, VPG9155 or VPG9555 • Inputs can be switched to any output • Used with VPG 6000/6200 chassis under standard or AEMS (Advanced Element Management System) • Each input TS can be up to 178Mbps • Individual channel bandwidth ceiling provides total control over capacity available to client (to a resolution of 0.1Mbps per TS) • DVB validity check (PID, PAT, PMT, ES and SES) • Reed-Solomon FEC can be applied to each ASI TS for reliable MPEG-2 transmission • Reed-Solomon checking for each input and output • Each input TS is assigned conditional access codes (2 layers) for secure content delivery

98 | network-electronics.com

BRAVONET

ASI/SDI 270 Multiplexer/Network Adapter

1.3

VPG9500

MUX – INPUT SIGNALS Input signal type

Maximum Payload Number of Inputs Input/output levels Input impedance Output impedance Cable equalizer (max) ASI*

270Mbps DVB-ASI–EN50083-9, or ASI*, containing data from 800kbps up to 178Mbps SDTI 178 ASI* 178 4 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 200m of Belden 8281 cable Submux ASI Packets192/208 bytes

MUX – OUTPUT SIGNALS Output signal type Number of Outputs Input/output levels (elec) Input impedance (elec) Output impedance (elec) Optical ASI*

270Mbps ASI*, or SDTI plus optical (where fitted) containing data up to 179.5Mbps 2 x electrical plus 1 x optical (where fitted) 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 1310nm /1550nm single mode (launch power -3dBm min) Submux ASI Packets 192/208 bytes

DEMUX – INPUT SIGNALS Input signal type Number of Inputs Optical

270Mbps ASI*, or SDTI plus optical (where fitted) 2 x electrical plus 1 x optical (where fitted) PINFET (-32bBm sensitivity)

DEMUX – OUTPUT SIGNALS Output signal type Number of outputs Input/output levels Input impedance Output impedance Cable equalizer (max) ASI*

270Mbps DVB-ASI 4 x 270Mbps plus 2 x 270Mbps input loopthrough SDTI 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 200m of Belden 8281 cable Submux ASI Packets 192/208 bytes

Power Consumption/ Environmental VPG9500TX/RX Operating temperature Storage temperature Humidity

<20W (All options) 0 °C to +50 °C -10 °C to +70 °C 20%–80% RH, non-condensing

Element Management / Alarms MUX CONTROLS Input rate setting Ch 1 to 4–Input bit rate ceiling, set to a resolution of 0.1Mbps RS FEC Ch 1 to 4–Add / don’t add DVB checking Ch 1 to 4–Check for PID, PAT, PMT, SES or ES errors DVB error threshold Sets thresholds for alarms Output mode Selects ASI or SDTI Optical Laser On or Off (where fitted) Channel ID codes Ch 1 to 4–Sets each TS’s conditional access codes (2)

MUX ALARMS (set as either; none, major or minor) Card fail Card fault Laser fail Optical module fault Input loss Ch 1 to 4–no input Input rate violation Ch 1 to 4–allowable input bit rate exceeded Configuration error Wrong input type selected DVB error Channel 1 to 4–RS, PID, PAT, PMT, SES or ES errors

DEMUX CONTROLS Standby protection switch Enable or disable automatic network standby switching Optical loss only switch Enable or disable switching to main electrical input when optical input is lost Switch persistence Error persistence to enable protection switch to operate Input mode Selects ASI or SDTI Mode selected Electrical or optical BER threshold Sets BER alarm threshold Non-Consec. error Network error threshold Channel ID codes Ch 1 to 4-–Sets each TS’s conditional access codes (2)

DEMUX ALARMS (set as either; none, minor or ­m ajor) Card fail Card fault Optical loss Input power threshold too low Input loss Loss of frame alignment Configuration error Ch 1 to 4–Error in data type or conditional access code Input errors Ch 1 to 4–Rate exceeds programmed thresholds Standby input selected Standby 270Mbps input is being used by DEMUX DVB error Channel 1 to 4–RS, SES errors

ORDERING INFORMATION VPG-9500-TX ASI SubMux card VPG-9500-RX ASI SubDeMux card

network-electronics.com

| 99

BRAVONET

1.3 ASI/SDI Protection Switching VPG7700

ASI/SDI Dual-Channel Intelligent Slipless Switch

Using patented techniques, the VPG7700 ASI/SDI Dual-Channel Intelligent Slipless Switch provides full transport stream protection for digital television networks.

With comprehensive TR 101 290 real-time analysis, the quality of both the primary and backup transport streams is available for any switching decisions. By performing feed-forward switching, TS packet alignment is guaranteed throughout the switching process. Unique patented packet and clock synthesis with programmable duration can also be enabled to bridge disruptions to both transport streams.

• Two fully independent DVB-ASI/SDI switches per card.

• Dual inputs and dual outputs on each switch.

• Patented, packet slipless switching techniques with look ahead buffering to maintain TS synchronization.

• Discontinuity flag set on switching.

• Byte and packet stuffed ASI modes supported.

• Accommodates any size TS between 850Kbps and 160Mbps.

• 75 ohm coaxial interfaces and two buffered monitor points per switch.

• Incoming stream analysis with RS Forward Error Correction verification.

• 188 to 204 byte packet conversion capability.

• Comprehensive switching algorithms with 1 second, 1 minute and 10 minute windows.

• Proactive switching on loss of signal, TS sync loss and error conditions.

• Reactive switching on long term error conditions.

• Patented packet and clock synthesis for bridging discontinuous traffic.

100 | network-electronics.com

BRAVONET

ASI/SDI Protection Switching

1.3

VPG7700

Operation

Front Panel

The VPG7700 switch is used to provide intelligent slipless switching of ASI transport stream packets. It provides unequalled network redundancy protection and is almost insensitive to differential delays between paths as it operates to ensure packet alignment and continuity.

In the single-redundant mode of operation, the VPG7700 contains two fully independent channels that can be used to protect two individual transport streams. In the dual-redundant mode, the product can be crossconnected with another VPG7700 to provide both hardware and power feed redundancy. In both modes of operation, the element management interface is used to select the switching criteria, which can extend from simple loss of signal to profile switching based on TR 101 290 analysis.

Packet synthesis can be enabled to maintain packet continuity during disruptions to both streams, which is not uncommon if the transport stream is switched prior to entering the transport network. The packet synthesis duration is programmable up to ten seconds.

Specifications The VPG7700 supports two separate modes of operation; DVB-ASI mode and SDI mode.

DVB-ASI Interface EN50083-9 Measurement TR 101 290

SDI SMPTE 259M SMPTE RP 165

Alarm Conditions Fixed Alarms DVB-ASI Mode SDI Mode Loss of signal Loss of signal Communication fail Communication fail Card fail Card fail Alternative input selected Alternative input selected Configuration error Configuration error Programmable Alarms DVB-ASI Mode SDI Mode DVB errors TRS errors DVB SES 1 minute EDH errors DVB SES 10 minute EDA errors RS errors IDA errors Continuity error Freeze frame Linearity error Audio missing PID profile mismatch Audio silence

Alarm Conditioning Each alarm condition can be programmed to different levels of severity and switching can be withheld until a preprogrammed persistence of an alarm condition is reached. In this way, chattering and unwanted switching conditions are avoided.

Severity levels Disabled, log only, information, warning, minor, major, critical Persistence Persistence may be set to any value and is used to filter unwanted short-duration alarms.

Indicators – LEDs · Power present (Yellow) · Card fail (Red) · Channel present 1A (Green) · Channel present 1B (Green) · Channel present 2A (Green) · Channel present 2B (Green) · Alarm 1A (Red) · Alarm 1B (Red) · Alarm 2A (Red) · Alarm 2B (Red) Monitor Points Four buffered 75-ohm SMC connectors are provided on the front panel to monitor the main and alternate outputs of each channel.

Element Management The VS7700 is compatible with the VPG6000 BRAVOnet™ AEMS (Advanced Element Management System). This is a Web browser based monitoring and control system with comprehensive SNMP support.

The following can be controlled via the network management interface: Configuration ASI/SDI Switching mode of operation Force 188 output PID profile Auto reversion time Packet synthesis timeout Alarms Priority level (see alarm severity table) Persistence time Hold time These are all programmed through the Web page. Their values depend on the network configuration and conditions. Preset values can be loaded from a configuration file. All configurations can be changed through the “Edit Config” Web page, and its associated pages.

History Logging A deep history log of all events is maintained and accessible through the History Web page. The Alarm Statistics page provides “errored seconds” analysis for each alarm event.

SNMP Compatibility An SNMP MIB conforming to SNMP V2 and V3 is supported through the VPG AEMS management platform.

Ordering Options The VPG7700 is supplied with a connector panel. There are no specific configurations of this product. The ordering code is VPG7700 ASI/SDI dual channel slipless switch.

network-electronics.com

| 101

The Concept Since the conception of Network Electronics, we have provided affordable, compact, energy efficient, high quality products. This philosophy is very much alive, and we continue to bring excellent products with advanced design into the market.

Our product portfolios, VikinX and Flashlink, have set new industry standards and have achieved many awards for modern design and excellent engineering year after year.

VikinX Compact

VikinX Sublime

Vikinx

The VikinX products represent our routing range and have three different entry points ...

The industry standard VikinX Compact series, for over 10 years, is the router for both entry level and broadcasters.

The VikinX Sublime series provides the next generation technologies including Ethernet control, 3Gbps Single Link support for 1080P High Definition TV, and ultra low power consumption. VikinX Sublime is the router for all users appreciating these features â&#x20AC;&#x201C; including top end broadcasters. ... and the flexible VikinX Modular series, joined by the newest member, the 256x256 High Definition router.

All these series interconnect; sharing software configuration, control and monitoring applications, providing legacy and growth paths appreciated by both our new and existing customers.

Network Electronics is proud of our ability to offer a complete range of routing solutions. Network Electronics is a strong, trusted partner to our customers around the world.

VikinX Modular

Broadcast and Telco formats covered in our routing products: 3GHD, HD, SDI, AES, ­Analog Video & Audio, Time code, RS-422, 34/45 Mbps, 140-155 Mbits and G703.

Flashlink

The Flashlink product range covers all signal processing and distribution equipment for the fiberoptic domain and comes with several innovative housing solutions.

The processing and distribution products are capturing market prominence with a complete line of products that will do the job that they are intended for, simply and straight forward and maintenance free with a technical passion that makes this high performance range stand out from the crowd.

It could be simply video or audio distribution or change over switching or frame synchronizers, what ever your product desires are we can satisfy your wishes.

Flashlink is known for being well engineered, simple for the user and ultra reliable with a cost performance advantage.

For many years the Flashlink product range has led the industry and has become the industry standard for fiber transport systems in the broadcast and video transport arenas.

From a simple one channel fiber system up to 40 channels of uncompressed data or broadcast signal formats on one fiber, Flashlink is known world wide for its innovative transport system and control system possibilities including SNMP on all products.

Synchronisation, Delay, Multiplexing, Converters, Distribution amplifiers, change over switching

HD-SDI, SD-SDI, AES, Analog Video and Audio, 10/100/1000Mbps Ethernet, RS-422, GPIO, L-Band, TDM, SDI Time Division Multiplexers, SDH/SONET Up to STM16/OC-48, DVB-ASI, fiber Channel, IP Transport systems for Video over IP, 3R Regeneration, CWDM and DWDM system platforms and many others

network-electronics.com

| 103

Signal Transport, Processing and Distribution Rack mount, studio facilities, OB vans: Flashlink FR-2RU 19” frame for up to 10 modules and dual power supply

Mobile use, outside broadcast (OB), events MOT-BOX, lightweight rugged housing for Flashlink FR-2RU frame

Stand-alone: N-BOX single module frame

Signal formats supported

by Flashlink…

• Uncompressed SD-SDI/HD-SDI/3G-SDI • NTSC/PAL • Analog audio and video • AES and MADI • E4, STM1-16, OC3-48 • DVB-ASI, M2S (Divicom), SMPTE 310M, SDTI • RS-422, GPI/GPO • 10/100/1000Mbps Ethernet • Fiber Channel • Analog L-band signals

Functions included…

• SD-SDI/HD-SDI and AES embedding/de-embedding with analog signal support • SD-SDI and HD-SDI 2x1 changeover modules • Distribution amplifiers in all flavours • HD-SD down-conversion • Electrical to Optical and Optical to Electrical media conversion • Fiber optical signal distribution and automatic protection switching • Optical multiplexing, WDM, CWDM and DWDM • 3R-regeneration of optical signals with wavelength scheme swapping • Electrical multiplexing, TDM • AES to analog audio and analog audio to AES conversion • SDI to NTSC/PAL encoding, 10-bit and 8-bit version • NTSC/PAL to SDI decoding • Line and frame synchronization • System Controller with web and SNMP support

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Flashlink Overview

See for yourself how you can benefit from the extensive features of the Flashlink system:

Feature

Function

Benefit

Multiformat Broadcast, Telecom and Datacom

Dedicated modules for different signals

Offer one or more of these services with

platform

formats, the MR-TR range supports all

potential future expansion with the same

formats optically

platform

Multi mode fiber on receivers allow for use

Install new fiber cables or use existing

with single or multi mode fibers

infrastructure

GYDA-SC System Controller with TCP/IP web

Dynamic web site generation by system

Use web interface for full access to installed

interface

controller gives access to remotely control

system from control site, no special software

and configure system

needed

GYDA-SC operates as an SNMP agent

Easy integration into larger control systems

Single mode and multi mode compatible

All Flashlink modules have Simple Network Management Protocol support via GYDA-SC Extensive monitoring possibilities

using SNMP GPI output, front card LEDs and RS-422

Tailor monitoring to existing studio needs

control Hot-swappable architecture

Change modules without powering down

Little or no down-time on running services

system Modular and easily expandable system

10 slots per Frame, hot swappable, add

Grow with the system, no need for huge

modules without powering down on-air

initial investments

frames Supports pathological video patterns without

Extremely good low frequency response

Robust signal transport system

Any wavelength scheme, 1310nm and 1550nm,

Add the number of wavelengths needed

Flexible system design, tailored for specific

CWDM and DWDM

per fiber according to current needs

customer needs

Very compact 2RU rack mount solution

Industry leading rack size compactness

Saves rack space with increased packing

scrambling

density Dual redundant power supply

Load sharing ensures working frame as

Lower risk for power loss during critical

long as more than one of the two powers

operations

operate normally AC and/or DC power supply

AC and/or DC operation

Maximum power redundancy, flexible power sources

Extremely low power consumption

No fans needed, better reliability

Less maintenance, reduced operating cost, longer lifetime

network-electronics.com

| 105

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Flashlink Housing

Flashlink 2RU Frame – Compact and comprehensive

FR-2RU-10-2

10 module slots • Mix and match modules according to your needs

Flashlink Frame

• All cabling at the rear • A fully functioning 16-channel CWDM system in only 2RU with dual converters

Easy configuration • Short time to get on air

No fans • Low power consumption means that we have removed the most common single point of failure; the fans

Two power supply slots

AC power AC power supply module 100–260 VAC (PWR-AC15/15/5/5V) DC power (optional) DC power supply module 36–72 VDC (PWR-DC15/15/5/5V) Redundant power (optional) Dimensions 483 x 88 x 178 mm (19”, 2RU) Card slots 10 Power supply slots (reserved) 2 Internal voltages +5V, +15V, –15V Weight approx. 3 kg fully populated ­dependent on module types

• Single or redundant, load sharing power supply, AC, DC or a mix

HOT-SWAPPABLE ARCHITECTURE • Hot-swapping of modules and power supplies accessible from front means short replacement time • No re-cabling needed for module replacement/

Power Supply for Flashlink Frame

re-configuration • No electrical disturbance on other modules during hot-swapping, particularly important in on air situations

Comprehensive control and monitoring • Status monitoring through front LEDs, GPI and RS-422 simultaneously

Internal power supplies are available in both AC- and DC-versions. Mixed AC/DC operation is possible, when both power supply slots are used for redundancy. An LED in the front shows if the power is active. The internal powers can deliver 30W at ±5V, 15W at +15V and 15W at –15V at the same time.

PWR-AC15/15/5/5V Input voltage Output voltages

100-260VAC ±5V, ±15V DC

• Address setting of each frame allows for simultaneous control of 8 frames • SNMP – Simple Network Management Protocol support for use with larger Network Management Systems is standard on all modules • GYDA-SC System Controller provides web interface/SNMP for all modules connected to the controller at a remote location • Remote configuration and monitoring saves time and troubleshooting time

106 | network-electronics.com

PWR-DC15/15/5/5V Input voltage Output voltages

36-72VDC ±5V, ±15V DC

FLASHLINK HOUSINGS

N-BOX

2.1

N-BOX is an ultra compact, ruggedized and cost effective housing for the Flashlink modules.

The same Flashlink modules and backplanes can be used in the Flashlink FR-2RU-10-2 frame and in N-BOX. This interchange ability allows for easy migration and system expansion from N-BOX to the Flashlink FR-2RU-10-2 frame in case of future expansion needs.

All Flashlink modules have the same feature set regardless of housing.

Distribution Amplifiers Embedders / De-embedders Video Converters Audio Converters Synchronisation Modules Automatic Changeover Modules EO and OE Converters Datacom Interfaces HD Downconverters

N-BOX-SH1RU

N-BOX-PL1

1RU Shelf

Mounting Plate

1RU shelf for up to 4 x N-BOX, including 3 front panels for empty

Mounting plate for N-BOX, allows wall, on-table, under-table

slots

mounting, complete with screw set

N-BOX-PL2

N-BOX-PL3

Angled Mounting Plate

Interconnecting Plate

Angled mounting plate for N-BOX, allows wall, on-table, under-table

Interconnecting plate for N-BOX, allows stapling of N-BOXes,

mounting, complete set with 2 plates and screws

complete set with 2 plates and screws

network-electronics.com

| 107

FLASHLINK HOUSINGS

2.1 MOT-BOX

Flashlink MOT-BOX – Extremely lightweight mobile transport enclosure

MOT-BOX is the most compact and lightweight mobile transport enclosure available.

Robust fiber cable The MIL specified tactile fiber with hermaphroditic connectors has 4 fibers and can be delivered in lengths of 150m, 250m or 500m. The

MOT-BOX houses one Flashlink 2RU frame with modules for optical

extremely robust fiber cable ensures a reliable fiber connection.

transport, signal processing and distribution.

RUGGEDized DESIGN

Multiple fibers, multiple signals The 4 fibers allow uni- or bi-directional video with associated audio

With its ruggedized design it is the logical choice for all mission-

and RS-422 signals. By utilising TDM (electrical multiplexing) and

critical mobile and outside broadcast applications.

CWDM (optical multiplexing) the number of signals can be increased

IDEAL FOR OUTSIDE BROADCAST EVENTS

to meet specific demands.

Network Electronics is known as the supplier of routing and signal

HD-SDI, SD-SDI or analog video, the choice is yours, MOT-BOX is the

transport solutions to all major sports events in the world. Events like

ideal companion for mobile and outside broadcast productions.

the Olympic Games, FIFA World Cup, and Skiing World Cups have been broadcasted to millions of viewers with Network Electronics equipment. The MOT-BOX is the ideal solution for coverage of these

MOT-BOX

applications and any other outside broadcast event.

• The most compact and lightweight 3RU mobile transport housing

Minimised spares holding

• Holds a Flashlink 2RU frame

The MOT-BOX can be pre-configured to meet specific requirements,

• AC and DC power supply option

and also shared among several vans for e.g. news gathering,

• Supports the full set of Flashlink modules

substantially lowering the investment cost.

• Ruggedized connector backplanes for tough use

Since the modules of the mobile system are exactly the same as you

• MIL specified tactile fiber cable reels with 4 fibers (optional)

use in the studio, the number of spares can be held at a minimum.

• Breakout panels to various connectors like SC/PC or E2000

Lightweight

• Only 12kg fully populated with redundant power supply

The MOT-BOX design with rugged connectors like XLRs for audio and a hermaphroditic (both male and female) fiber connector holding 4 fibers allows for use in harsh environment. The low weight gives maximum mobility, two person lift is a thing from the past. One person can easily carry the MOT-BOX alone. In a fully loaded van close to exceeding weight limits, the low weight of the MOT-BOX will be appreciated.

108 | network-electronics.com

available

available

FLASHLINK HOUSINGS

MOT-BOX

2.1

MOT-BOX AC power

MOT-BOX

MOT-BOX Backplane Modules DC power

AC Power PWR-AC15/15/5/5V AC power supply module 100-260 VAC DC Power (optional) PWR-DC15/15/5/5V DC power supply module 36-72 VDC Dimensions (WxDxH) 530 x 570 x 215 mm with front and rear covers. 530 x 425 x 215 mm w/o front and rear covers Weight Including PSU and 10 modules: <12 kg Card slots 10 Power Supply slots 2 Internal voltages +5V, -5V, +15V, -15V

Fiber connector

MB-FR-1RU

Ethernet

1RU frame with front mounted 4-Fiber expanded beam hermaphroditic MIL connector, rear panel with 4 x SC-PC connector. Space for up to 5 MIL fiber connectors.

MB-MIL-4SC

Mil connector to 4xSC breakout for use with MB-FR-1RU

MB-BP-00 Blindplate

MB-BP-01 Backplane for ADC-AES

MB-BP-02 Backplane for DAC-AES, DA-AA or DA-AES

MB-BP-03 Backplane for SDI-OE, SDI-EO, HD-OE or HD-EO

Fiber hermaphroditic expanded beam connector

MB-BP-04 Backplane for DA-SDI ,DA-SDI-NRC, DA-HDSDI, ADC-SDI, ADC-SDI-CC, DAC-SDI, SDI-TD MB-BP-05 Backplane for AV-MUX

The optical fiber is fully protected behind a hard-coated expanded beam lens and forms a no-contact connection.

Dirt and contamination can be simply cleaned

MB-BP-06 Backplane for AAV-MUX or AVA-MUX

with a cloth (or your shirt sleeve)

MB-BP-07 Backplane for AV-DMUX, AAV-DMUX, AVA-DMUX or AV-HD/SD-XMUX

MB-BP-08 Backplane for D422-MG (RS-422)

MOT-BOX Reels with cables Singlemode tactical 4-Fiber cable terminated with expanded beam hermaphroditic MIL fiber connector MB-Reel-150 Reel with 150m MB-Reel-250 Reel with 250m MB-Reel-500 Reel with 500m

MB-BP-09 Backplane for D422-MD (GPI in and out)

MB-BP-10 Backplane with 4x SC-PC fiber connector including 4x0.5m fiber patch cord MB-BP-11 Backplane with 4x E2000/PC fiber connector including 4x0.5m fiber patch cord

network-electronics.com

| 109

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 System Controller for Flashlink GYDA-SC Web and SNMP based Control, Monitoring and Configuration – Element manager for Flashlink • Controls up to 8 Flashlink frames • 10/100Base-T Ethernet interface with TCP/IP protocol • Standard web browsers to configure and monitor Flashlink.

• Log-files are stored on compact flash card • User-friendly graphical user interface • Support for VikinX Compact and VikinX Sublime router control • SNMP system with alarm and trap filtering implemented for all modules • FTP service for online upgrades • No annual licence fee • Visualize system condition in Visio drawings (option) And many more ...

Example of web interface in GYDA-SC

System CPU Memory

400MHz Intel PXA255 StrongARM 64MB SDRAM 8MB Flash

Electrical Interfaces 2 x RS-232 or RS-422 control ports on DB9F conforming to IBM PC (RS-232) or SMTPE 207M (RS-422) 1 x 10BaseT/100Base-TX fast ethernet, full duplex capable

Power Consumption +5V DC / 3W

110 | network-electronics.com

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

System Controller for Flashlink

2.1 Example of alarm list in GYDA-SC

Site 3

Site 2

ETH SDI/ASI 2

SDI/ASI 2

CWDM

fibre

CWDM

Site 1

ETH SDI/ASI 2

SDI/ASI 2

CWDM

GYDA-SC

CWDM

4 SDI/ASI

4 4

fibre

SDI/ASI SDI/ASI ETH

CWDM

fibre

4 SDI/ASI

GYDA-SC

Site 4

Site 5

ETH SDI/ASI 2

SDI/ASI 2

GYDA-SC fibre

GYDA-SC ETH SDI/ASI 2

SDI/ASI 2

GYDA-SC

4

fibre

4 CWDM

4 SDI/ASI

CWDM

CWDM

4 SDI/ASI

CWDM

CWDM

SDI/ASI SDI/ASI ETH

Flashlink gives you the possibility to use ethernet over fiber.

With this solution you can monitor and control the whole system with GYDA-SC

Remote monitoring and control

Online monitoring

Use internet technology to connect remote sites together, enabling

GYDA-SC will continuously monitor the system for all vital

complete control of all your Flashlink equipment from all locations.

parameters, like signal quality and power supply voltages. The web

Sending technicians to remote locations for error tracing becomes

page is automatically updated with the latest information.

a thing of the past. Error correction is faster, saving money and providing better availability to the end user.

Configuration All cards can be configured through GYDA-SC. Some cards have advanced configuration possibilities which are straight-forward with GYDA-SC. The configuration is stored in GYDA-SC securing on-the-fly card replacements with minimum down time.

Alarms

GYDA-SC and SNMP applications

Logging

GYDA-SC has advanced alarm handling, where an operator can get a “system health

All Flashlink modules will generate SNMP

history with date and time of each event.

condition” report. The alarms will not be

traps according to user settings in the

The log will be stored on the flash card, and

removed from the alarm list until they are

interface configuration section on the

can not be cleared without a reset, making

acknowledged by an operator. An alarm

GYDA-SC. GYDA-SC is also able to interface

it ideal for error tracing «a posteriori».

can be acknowledged while it still is active,

and control cross point settings of the

The log file can easily be exported to your

it will then be removed automatically from

VikinX Compact routers, providing cross

computer for future reference

the alarm list, the moment the cause of the

point information via SNMP or the web

alarm is resolved.

interface.

Example of alarms:

This feature gives you the possibility to

to all users on the network. GYDA-SC

• Card removed

have:

allows anonymous/open access to the card

• Loss of signal

• Audible alarms

information. Two extra levels of protection

• Laser failure

• Alarm notification on e-mail

(observer and operator) can be enabled for

• Supply voltage out of range

• Browser pop-up on module pages with

situations where anonymous access to the

The logging facility gives the user a system

Availability and Password protection In the default setup, GYDA-SC is available

• GPI input

System visualization

alarms

system, alarm and log tabs is not wanted.

• Trap relay Manuals and technical documentation

As an optional feature you can use your

are always available since GYDA–SC has a

Visio system drawings to visualize the

complete collection of all Flashlink manuals

connection and the system status in GYDA-

in Adobe PDF format.

SC.

network-electronics.com

| 111

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Modular Distribution Amplifiers DA-3GHD

Multi Rate 3GHD-SDI Distribution Amplifier HD1 HD2 HD3 Equaliser

HD4

HD input

HD5 Bypass

HD6 HD7 HD8 Microcontroller

Remote Control

Electrical Outputs Connectors Output Return loss

75 ohm BNC - < -15dB, 5MHz -1.5GHz - < -10dB, 1.5GHz - 3GHz Output signal level 800mV +/- 10% Output signal rise / fall time 20% – 80% - SD limit: [0.4ns – 1.5ns]; <0.5ns rise/ fall var.

- HD limit: < 270ps, <100ps rise/fall var.

- 3G HD limit: <135ps, <50ps rise/fall var.

Amplitude overshoot <10% Polarity - Output 1,3 5 & 7: Non inverting electrical - Output 2, 4, 6 & 8: inverting electrical Output timing jitter - SD: <0.2 UI - HD: <1 UI - 3G HD: <1UI Output alignment jitter - SD: <0.15 UI - HD: <0.15 UI - 3G HD: <0.2UI

Electrical Inputs Connectors 75 ohm BNC Input Cable Eq. @270Mbps >300m w/Belden 8281, with BER < 10E-12 Input Cable Eq. @1485Mbps >100m w/Belden 1694A, with BER < 10E-12 Input Cable Eq. @2970Mbps >70m w/Belden 1694A, with BER < 10E-12 Input Return loss - < -15dB, 5MHz -1.5GHz - < -10dB, 1.5GHz - 3GHz Jitter tolerance - SD limit: - 10Hz-1kHz: >1 UI - 10kHz – 5MHz: >0.2 UI - HD limit: - 10Hz-100kHz: >1 UI - 100kHz–10MHz: >0.2 UI - 3G HD limit: - 10Hz-100kHz: >2 UI - 100kHz–10MHz: >0.3 UI

FeaTures Re-clocking Automatic SD/ HD detection Automatic output slew rate adjustment according to SMPTE-259M and SMPTE292M/ SMPTE424M Selectable loop bandwidth - Low: 3GHD = 3.5Mhz, HD = 1.5MHz, SD = 0.32MHz - High: 3GHD = 7MHz, HD = 3.5MHz, SD = 0.64MHz Supported clock rates 270, 1483.5, 1485, 2967, 2970Mbps Input equalizer Eq. bypass for non-video formats or low bit rates

Supported standards SMPTE

SMPTE424M, SMPTE292M, SMPTE259M, SMPTE305M, SMPTE310M

DVB-ASI EN50083-9 (on non-inverting outputs)

112 | network-electronics.com

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Modular Distribution Amplifiers

2.1

DA-SDI

DA-VA

SDI Distribution Amplifier

Analog Video Multisignal Distribution Amplifier

SDI1

Video1

SDI2 Video2

SDI3 Equaliser

SDI4

SDI input

Video input

Video3

SDI5 Bypass

Video4

SDI6 Video5

SDI7

Video6

SDI8 Microcontroller

Remote Control

Microcontroller

• SDI / ASI distribution amplifier • 6 non-inverting outputs, 2 inverting outputs • Re-clocking rates 143, 177, 270, 360, 540Mbps • Configurable reclocker bypass for non-video bitrates • Configurable EQ defeat for low bitrates

Electrical Signal Inputs Number of inputs Standard Data Rate Connector Impedance Return Loss Cable Equalization

1 SMPTE 259M 19.4Mbps – 540Mbps 75 ohm BNC female 75 ohm nominal > 15dB (5MHz-270MHz) 0 to 300m typical Belden 8281A

Electrical Signal Outputs Number of outputs 8 Connector 75 ohm BNC female Signal Level 800mVp-p ±100mV Signal Polarity All outputs non-inverting Impedance 75 ohm nominal Return Loss > 15dB (5MHz-270MHz)

Features Re-clocking rates Supported standards

143, 177, 270, 360, 540Mbps SMPTE 259M, 305.2M, 344M, 310M, DVB-ASI EN50083-9 (on non-inverting outputs), AES-3id Configuration Configurable autom. mute or bypass when not locked Input equaliser Bypass for non-video formats Configurable EQ mute

GEneral Power +5V DC / 3W Control Control system for access to setup and module status with BITE (Built-In Test Equipment) for use with GYDA-SC Control System

Remote Control

• DC to 200MHz analog video • 6 non-inverting outputs • Also suitable for SDI according to SMPTE-259M

Electrical Input Maximum input 2 Vp-p Coupling DC Impedance 75 ohm (switchable to high impedance) Connector BNC

Electrical Output Number of outputs 6 Connector BNC Impedance 75 ohm Signal polarity 6 non inverting

Analog video Frequency range Return loss Video S/N ratio Differential gain Differential phase Gain

0 to 200 MHz -3dB > 40dB @ 10MHz > 70dB < 0.1 % < 0.1 º 0dB ± 0.1dB 0-15 MHz 0dB ± 0.5dB 0-150 MHz

Analog amplifier used for SDI-video (SMPTE 259M) Gain Jitter Return loss Data rate Rise/fall overshoot Rise and fall time Rise/fall time difference

0dB < 700 ps, typ. 250 ps > 15dB @ 270MHz up to 270Mbps < 10 %, typ. 0 % > 400 ps, < 1500 ps, typ. 1000 ps < 500 ps, typ. 100 ps

General Power +5V DC / 0.1 W, ±15V DC / 1.9W Control Control system for access to setup and module status with BITE (Built-In Test Equipment) for use with GYDA-SC Control System

network-electronics.com

| 113

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Modular Distribution Amplifiers DA-AES

DA-AA

Dual Digital Audio Distribution Amplifier

Dual Analog Audio Distribution Amplifier AES 1 Output AES 1 Output

AES 1 Input

ANA 1 Output

ANA 1 Input

ANA 1 Output

AES 1 Output

ANA 1 Output Gain Settings

AES 1 Output AES 2 Output AES 2 Output

AES 2 Input

ANA 1 Output ANA 2 Output

ANA 2 Input

ANA 2 Output

AES 2 Output

ANA 2 Output Gain Settings

AES 2 Output Microcontroller

Remote Control

Microcontroller

• Digital audio distribution amplifier • Configurable as Dual 1x4 or Single 1x8 • Reports signal presence • Supports sample rate from 15 to 96kHz • Supports bit rate from 16kbps to 14Mbps

Electrical Input

ANA 2 Output Remote Control

• Analog audio distribution amplifier • Precision gain settings for -12 to +12dB • Allows mixing of 2 inputs in dual 1x4 mode • For balanced AC signals from 3.3Hz to 400kHz

Electrical Input

Number of inputs 1 or 2 Standard AES-3 Supported Sample Rate 15-96kHz Signal Amplitude 0.2-7Vp-p Connector DB15 balanced Impedance 110 ohm nominal

Number of inputs Connector Impedance Maximum Input Level Common mode rejection

2 DB15 balanced > 10k ohm +25dBu >70dB

Electrical Output Electrical Output Number of outputs Connector Signal amplitude Impedance

8 or 4+4 DB25 balanced 4Vp-p ±1Vp-p 110 ohm nominal

Number of outputs Connector Frequency response Crosstalk THD+N Impedance

Features Configurable dual 1 input to 4 outputs or single 1 input to 8 outputs

GEneral Power +5V DC / 0.5W Control Control system for access to setup and module status with BITE (Built-In Test Equipment) for use with GYDA-SC Control System

114 | network-electronics.com

Maximum Output Level Output voltage balance ratio Output common mode rejection Switched gain tolerance Gain

8 DB25 balanced (Tascam DA88) 20 Hz–80kHz ±0.2dB -100dB > 100dB ref to 20 Hz-20kHz @ 20dBu 40 ohm nominal.

Maximum 55 ohm +25dBu >30dB >50dB 0.1dB -12 to +12dB

GENERAL Power +5V / 0.1 W, ±15V / 1.9W Control Control system for access to setup and module status with BITE (Built-In Test Equipment) for use with GYDA-SC Control System

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Modular Distribution Amplifiers

2.1

DAC-MON

SDI Distribution Amplifier w/Monitoring Output CVBS 1 SDI IN

CVBS 2

EDH

CVBS 3 SDI 1 SDI 2 SDI 3

• 8-bit composite encoder and DA • 3 SDI and 3 composite outputs • Automatic standards detection • EDH monitoring • Also available as PAL-M version

Digital Serial Input Signal 4:2:2 SMPTE 259M-C, 270Mbps Equalization Automatic Impedance 75 ohm Return loss >15dB @ 270MHz Signal level nom. 800mV Connector BNC

Digital Serial Output Signal 4:2:2 SMPTE 259M-C, 270Mbps reclocked Connector BNC Number of outputs 3 Impedance 75 ohm Return loss >15dB @ 270MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V

Analog Output Connector BNC Impedance 75 ohm Formats Composite video, PAL 625/50 or NTSC 525/60 Signal level 1Vp-p Return loss >40dB up to 10MHz

Processing Performance Signal path Sampling Video bandwidth SNR

8/10 bits 27MHz 5.5MHz >60dB typical

GENERAL Power +5V DC / 2W, -15V DC / 0.6W Control Control system for access to setup and module status with BITE (Built-In Test Equipment) for use with GYDA-SC Control System

network-electronics.com

| 115

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Embedders/De-embedders Flashlink backplanes for 110 ohm AES3 or 75 ohm AES-3id All Flashlink modules for audio are for 110ohm balanced AES3 audio, but can also be ordered with a backplane for 75ohm unbalanced audio.

The tables below show the products and compatible backplanes.

Audio embedding v = Factory default backplane x = Alternative backplane

BACKPL ANE AV-MUX-C1

AV-MUX-C2

AAV-DMUX-C1

AV-HD-XMUX-C1

AV-HD-XMUX-C2

(110ohm)

(75ohm)

(110ohm)

(110ohm)

(75ohm)

AV-MUX(-xxT)

v

x

AV-DMUX (-R)

v

x

P ro d u c t

AAV-MUX (-xxT)

v

AAV-DMUX (-R)

v

AV-HD/SD-XMUX

x

v

x

AV-HD/SD-XMUX (-xxT)

x

v

x

AV-HD/SD-XMUX (-R)

x

v

x

AV-HD/SD-XMUX (-R-xxT)

x

Audio conversion v = Factory default backplane x = Alternative backplane

v

BACKPL ANE ADC-AES-C1

ADC-AES-C2

DAC-AES-C1

DAC-AES-C2

(100ohm)

(75ohm)

(110ohm)

(75ohm)

v

x v

x

P ro d u c t ADC-AES DAC-AES

Alternative backplane

Short description (see respective user manual for detailed information)

AV-MUX-C2

2 slots, 4x 75ohm BNC i/p and 4x o/p, for AES-3id

AV-HD-XMUX-C2

1 slot, 2x 75ohm BNC i/p and 2x o/p, for AES-3id

ADC-AES-C2

1 slot, 2x75ohm BNC o/p for AES-3id

DAC-AES-C2

1 slot, 2x75ohm BNC i/p for AES-3id

116 | network-electronics.com

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Embedders/De-embedders AV-MUX, AV-MUX-xxT

AV-DMUX, AV-DMUX-R

Digital Audio Embedder

Digital Audio De-embedder

AES1 Input

SRC I0

AES2 Input

SRC I0

AES3 Input

AES1 Output

AES1 Output

AES2 Output

AES2 Output

AES3 Output

SRC I0

AES4 Input

EQ

Re-clocker

EDH

4-ch Multiplexer

4-ch Multiplexer

EDH

Microcontroller

SDI Input

EQ

Re-clocker

EDH

4-ch De-multiplexer

4-ch De-multiplexer Microcontroller

Remote Control

GENERAL

Also available with 75ohm AES-3id backplane

SDI Output Remote Control

• 4-channel 24-bit AES (8 mono audio) audio de-embedder • EDH in accordance with SMPTE-RP165 • De-embedding in acc. with SMPTE-272M giving maximum compatibility to 3rd party products • Transformer balanced AES outputs • 110ohm balanced and 75ohm unbalanced version available • Optional with optical input (AV-DMUX-R)

GENERAL +5V DC / 5.3W DIP Switches/GYDA-SC Front panel LEDs and GYDA-SC SDI input loss, 4 x AES input loss, laser failure, power good

AES Audio Input/ Outputs Number of inputs 4 transf. balanced Number of outputs 4 transf. balanced Format AES3-1992 Impedance 110ohm or 75ohm Connector DB25-110ohm and BNC-75ohm Sampling rates Asynchronous to SDI 16-144kHz w/SRC enabled. Isosynchronous to SDI 48kHz

SDI Input / Output Data rate NRZ 270Mbps Video Frame rates 50 Hz and 60 Hz Input Equalization Auto. up to 35dB Impedance 75ohm Return loss >15dB @270MHz Signal level nom. 800mV Connector BNC Output rise/fall time typ. 650ps

Optical Output (optional) Transmission circuit fiber Light source Optical wavelength (ver. 13T) Optical power

AES4 Output

SDI Output

• 4-channel 24-bit AES (8 mono audio) audio embedder • Automatic insertion of sample rate converters • EDH in accordance with SMPTE-RP165 • Embedding in acc. with SMPTE-272M giving maximum compatibility to 3rd party products • Transformer balanced AES in- and outputs • Allows external sampling rates from 16-144kHz Also available w/SRC enabled with 75ohm • Can be used as 4-CH embedder, 4-CH de-embedder or AES-3id 2-CH de-embedder/embedder backplane • 110ohm balanced and 75ohm unbal. version avail.

• Optional with optical output (AV-MUX-xxT)

Power Control Monitoring GPI

AES3 Output

Optical Input

AES4 Output

SRC I0

Optical Output SDI Input

2.1

Single mode 9/125um F-P/DFB Laser 1310nm ± 40nm -7.5dBm

Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 153 Optical power for CWDM modules 0dBm Jitter (UI=unit interval) 0.135 UI max.

Connector return loss Better than 40dB typ.

Maximum reflected power 4% Connector SC/UPC according to SMPTE-297M

Power Control Monitoring GPI

+5V DC / 3.7W DIP Switches/GYDA-SC Front panel LEDs and GYDA-SC SDI input loss, 2 x audio group, optical input loss, power good

Optical Input (optional) Data rate optical 270Mbps Sensitivity Better than –20dBm typ.

Optical wavelength 1200-1620nm Transmission circuit fiber Multi mode 50/125um.

Single mode 9/125um ­compatible Connector Return loss >40dB w/SM fiber Detector overload threshold min. –6dBm, typ. –3dBm Connector SC/UPC

AES Audio Output Number of outputs 8 transf. balanced Format AES3-1992 Impedance 110ohm or 75ohm Connector DB25-110ohm and BNC-75ohm Sampling rates 48kHz

SDI Input / Output Data rate NRZ 143-540Mbps Input Equalization Auto. up to 35dB Impedance 75 ohm Return loss >15dB @270MHz Signal level nom. 800mV Connector BNC Number of outputs 1 Output rise/fall time typ. 650ps

network-electronics.com

| 117

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Embedders/De-embedders AV-HD-XMUX / AV-HD-XMUX-r / AV-HD-XMUX-T

HD Digital Audio Embedder and De-embedder

Embedder features

• All-in-one Embedder and De-embedder • Multi-format SD/HD support • Embeds and de-embeds 4 AES signals • AES inputs with sample rate conversion allowing sampling rates from 32 to 192kHz • Sample rate conversion bypass for Dolby E audio • Transformer coupled AES in- and outputs • Accepts 20 or 24 bit audio • RS-422 input for embedding of serial data or GPI information • Uninterrupted transport of AES audio in case of loss of SDI signal • Automatic mute of AES in case of AES errors

Compliant to the following Broadcast standards

Optical port features

• Optional optical input and output providing up to 30dB optical budget (SD) • Supports pathological SDI/HDSDI pattern (checkfield) • 1310nm, 1550nm and CWDM lasers available

Formats Standards SD, 270Mbps SMPTE 259M, SMPTE 272M-AC (synchronous

audio at 48kHz and extended data packets) HD, 1485 Mbps SMPTE 292M, SMPTE 274M, SMPTE 291M,

SMPTE 295M SMPTE 296M, SMPTE 299M AES AES3-1996 Optical SMPTE 297M, SMPTE 292M EDH Compliant to SMPTE-RP165

Audio processor/delay features

• Audio matrix and processor allowing group swap, channel shuffle, L/R inversion and channel summing • 4-channel AES variable audio delay line with up to 1.2s delay

Other general features

• Internal video generator • Audio Test Tone generator • Built-in EDH processor • Backplanes for balanced 110 ohm and unbalanced 75 ohm AES available • GYDA-SC enabled for remote control, status monitoring, error reporting and SNMP support

SD / HD

Optical Transmitter

Optical Receiver

optical fiber Re-clocker SDI/HD Input RS422

EDH/ DeSer.

Deembed.

Embedder

EDH/ Ser.

EQ

Tx

• Audio Matrix • Audio Delay • Group swapping • Video Generator • Audio Generator

RS422

AES1

SRC

AES2

SRC

AES2

AES3

SRC

AES3

AES4

SRC

AES1

AES4 Microcontroller

118 | network-electronics.com

SDI/HD Output

EQ Audio Processing

Rx

SD / HD optical fiber

Remote Control

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Embedders/De-embedders

Measurement conditions Audio Sampling rate Ambient temperature

48 kHz 25 ºC

GENERAL Power Control Monitoring EDH processing

+5V DC / 3.3W DIP switches, GYDA-SC system controller.

GPi Front panel LEDs GYDA-SC system controller and GPI. Full. Received flags are updated, new CRCs are calculated

Electrical video input Video Data rate 270Mbps or 1.485Gbps Video frame rate 24p, 50i, 60i, 50p or 60p Hz. Equalization Automatic up to 35dB Impedance 75 ohm Return loss >15dB @1,5GHz Signal level nom. 800mV Connector BNC

2.1

Electrical Video Output Number of HD/SDI outputs 1 Connector BNC Impedance 75 ohm Return loss > 15dB @1.5GHz Signal level nom. 800mV. Rise/fall time (SD) typically 650ps. @270Mbps Rise/fall time (HD) typically 100ps. @1485Mbps

Optical video output Transmission circuit fiber Single mode Light source F-P/DFB Laser Optical wavelength ver. 13T 1310nm ± 40nm Optical power: -7.5 or 0 dBm Optical wavelength ver. CxxxxT (16 CWDM wavelength acc. to ITU-T G.694.2) Optical power: 0 dBm Jitter (UI=unit interval) 0.135 UI max.

Connector SC/UPC HD/SDI digital serial component video

Audio outputs Optical video input Transmission circuit fiber Multi-mode 50/125 um Optical wavelength 1200–1620nm Maximum Optical power 0 dBm Minimum Optical power HD/SD –25/–30 dBm Return loss Better than 27 dB typ.

Maximum reflected power 4% Connector SC/UPC

Audio Inputs Number of AES inputs Audio data rate

4 32 kHz to 192 kHz, converted to 48 kHz if not isochronous to the video input signal Impedance (C1) 110 ohm transformer balanced Connector (C1) 25 pin D-sub. (4 Inputs + 4 outputs) Impedance (C2) 75 ohm unbalanced Connector (C2) 4 x BNC Embedded audio word length: 24 bits Embedded audio Channel status: As received when synchronous.

Otherwise fixed Sample rate converter dynamic range: 140 dB(A)

Number of AES outputs Audio data rate Impedance (C1) Connector (C1) Impedance (C2) Connector (C2)

4 48 kHz 110 transformer balanced 25 pin D-sub 75 ohm unbalanced 4 x BNC

data outputs Number of RS-422 Outputs 1 Connector RJ45

gpi outputs Signals

Power status good, video optical input loss, video electrical input loss Connector RJ45 Signal type Open drain transistor with free-wheel diode Positive signal Valid video output Maximum voltage 100 V Maximum current 150 mA

data Inputs RS-422 1 Connector RJ45 UART Baud rates 115200, 34800 Data length 5 to 8 bits Parity None, odd or even Stop bits 1, 1.5 or 2 bits GPI mode Raw data sampling frequency 93750bps (supports baud rates up to 19200) AAV-DMUX-C1: AES-3 (110 ohm)

AV-HD-XMUX-C1: AV-HD-XMUX-C2: AV-HD-MUX-C2: Transponder AES-3ID (75 ohm) AES-3ID (75 ohm)

AV-HD-XMUX-C3: 1 optical input, 2 SDI outputs and 4 BNC AES-3ID outputs

network-electronics.com

| 119

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Embedders/De-embedders AAV-MUX, AAV-MUX-xxT

AAV-DMUX, AAV-DMUX-R

Analog Audio Embedder

Analog Audio De-embedder

Bal. Input

Gain Setting

A/D Optical Input

ANA1 ANA2 ANA3

Reclocker deserialiser

SDI

ANA4

SDI Input

Audio 2R Audio 2L De-embedder

Audio 1R Audio 1L

Optical Output

EQ

Re-clocker

4-ch Multiplexer

EDH

EDH

Microcontroller

SDI Output Remote Control

• 4 channel analog audio embedder • 24 bit converters 107dB(A) typical dynamic range • Cascadable for additional audio channels • Gain adjustments with DIP switches • EDH insertion and handling • 20 or 24 bit embedding • Optional with optical output (AAV-MUX-xxT)

GENERAL

Power Control Monitoring EDH Processing Embedding level

+5V/2.6W / +15V/1W DIP switches Front panel LEDs and GYDA-SC and GPI Full. Received flags are updated, new CRCs are calculated SMPTE 272M-C Synchronous audio at 48kHz and extended data packets (24-bit optional)

VIDEO INPUT

Video data rate 270Mbps Video frame rate 50Hz or 60Hz Equalization Automatic up to 35dB Impedance 75 ohm Return loss >15dB @ 270 MHz Signal level Nom. 800 mV Connector BNC

AUDIO INPUTS

No. of ana. inputs 4 Audio data rate 48kHz Impedance 24 kohm electronically balanced Connector 25-pin D-sub Embedded audio word length: Configurable 20 or 24 bits.

Dynamic range* >100dB(A) Crosstalk < -90dB Frequency response 20-Hz-20kHz +0dB –0.1dB Common Mode Rejection Ratio (CMRR): Min 70dB, typ 80dB Group delay 12 samles, 250 us Stopband attenuation 95dB

SDI OUTPUT

No. of SDI outputs 1 Connector BNC Impedance 75ohm Return loss >15dB @ 270 MHz Signal level Nom. 800 mV Rise/fall time 650ps typ.

OPTICAL OUTPUT (optional)

Transmission circuit fiber Single mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 153 Optical power for CWDM modules 0dBm Jitter (UI = unit interval) 0.135 UI max.

Return loss >40dB Max. reflected power 4% Connector SC/UPC * Dynamic range is calculated as |(THD+N of –60dBFS signal)|+60

120 | network-electronics.com

• 4 channel analog audio de-embedder • 24 bit converters 106dB(A) typical dynamic range • Cascadable for additional audio channels • Gain adjustments on DIP switches • EDH insertion and handling • Optional with optical input (AAV-DMUX-R)

GENERAL

Power Control Monitoring EDH Processing De-Embedding level

+5V/2.4W / ±15V/2.2W DIP switches Front panel LEDs and GYDA-SC and GPI Full. Received flags are updated, new CRCs are calculated SMPTE 272M-C Synchronous audio at 48kHz and extended data packets (24-bit optional)

Analog AUDIO OUTPUTS

Number of outputs 4 electronically balanced Connector D-sub 25 pin female Common mode voltage tolerance ±15 V Output impedance (differential) 50ohm Frequency response 10 Hz–21.5kHz, +0dB -0.1dB Passband ripple ±0.0002dB Group delay 44 samples/0.9ms Stopband attenuation 75dB Dynamic range* Min. 100dB(A) (0dBFS @ +12dBu). Typ. 105dB(A) THD+N @ -1dBFS Max. –80dB, Typ. –87dB Intermodulation dist. @–12dB FS** Max. –80dB, Typ. –87dB Crosstalk Max. –85dB, Typ. –95dB

SDI OUTPUT

No. of SDI outputs 1 Connector BNC Impedance 75ohm Return loss > 15dB @270MHz Signal level nom. 800mV. Rise/fall time typically 650ps.

OPTICAL INPUT (optional) Transmission circuit fiber

Multi mode 50/125um Single mode 9/125um compatible Optical wavelength 1200-1620nm Max. Optical power 0dBm Sensitivity -20dBm, typ. -25dBm Return loss Better than 40dB typ.

Max. reflected power 4% Connector SC/UPC

VIDEO INPUT

Video Data rate 270Mbps Video frame rate 50Hz or 60Hz Equalization Automatic up to 35dB Impedance 75ohm Return loss >15dB @270MHz Signal level nom. 800mV Connector BNC * |(THD+N of –60dB FS signal)| + 60 ** SMPTE 4:1 60 Hz + 7kHz

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Embedders/De-embedders

2.1

The Global Video Transport Leader

network-electronics.com

| 121

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Embedders/De-embedders AAV-HD-XMUX(-T/R)/ AAV-SD-XMUX(-T/R)

HD/SD Analog/Digital Audio Embedder

SD / HD

Optical Transmitter

Optical Receiver

optical fiber Re-clocker SDI/HD Input RS422

EDH/ DeSer.

Deembed.

Embedder

EDH/ Ser.

EQ

SDI/HD Output

EQ Audio Processing

Rx

ANA1

A/D

ANA2

A/D

AES1

SRC

AES2

SRC

SD / HD optical fiber

Tx

• Audio Matrix • Audio Delay • Group swapping • Video Generator • Audio Generator

RS422

AES1 AES2

Microcontroller

Remote Control

• AAV-HD-XMUX can handle SD and HD digital uncompressed video • AAV-SD-XMUX can handle SD digital uncompressed video • De-embed and embed all groups of audio • Copy or move audio groups without additional delay • De-embed 2 AES3 digital audio and non-audio signals • Embed 2 AES3 digital audio and non-audio signals • Embed 4 analogue audio signals • Apply sample rate converters when needed on the AES3 inputs • Apply extra audio delay • Swap stereo channels • Make mono or sum from stereo signals • Have optical laser output • Have optical input • Transport asynchronous serial data • Generate video and audio signals • De-glitch correctly synchronised switched video

Measurement conditions Audio Sampling rate Ambient temperature

48 kHz 25ºC

General Power

+5V DC 0.7A 3.5W +-15V DC 0.017A 0.5W Control DIP switches, GYDA system controller.

Monitoring Front panel LEDs, GYDA system controller and GPI. EDH/CRC processing Full. Received flags are updated, new CRCs are calculated.

Boot time 1.2 second Digital audio inputs and outputs Conform to AES3-2003 Video inputs and outputs Conform to SMPTE 292M-1998 Data input and output Conform to EIA RS-485

122 | network-electronics.com

Processing Video latency is variable due to the de-glitcher but the values below apply when the video signal is first applied. Other latency values are maximum values.

SD latencies Video

des+4+350+256+2+ser video samples = 45.3us

Audio embedding AES+2+1+16 audio samples=20/48000 = 417us Audio de-embedding 4+16+1 audio samples =21/48000 = 438us Embedding data GPI mode 8+4+32 96kHz samples =44/96000 = 458us Embedding data UART mode 32+128+17+16 96kHz samples =193/96000 = 2.01ms De-embedd. data GPI mode 8+32+8 96kHz samples =44/96000 = 458us De-embedding UART mode 8+32+8 96kHz samples =48/96000 = 458us HD latencies Video

des+8+1024+1024+3+ser video samples = 27.6us Audio embedding AES+2+1+8=12 /48000 = 250us Audio de-embedding 2+8+1=11/48000 = 229us Embedding data GPI mode 8+4+16 96kHz samples =28/96000 = 292us Embedding data UART mode 16+128+17+16 96kHz samples =177/96000 = 1.84ms De-embedd. data GPI mode 4+16+8 96kHz samples =28/96000 = 292us De-embedding UART mode 4+16+8 96kHz samples =28/96000 = 292us

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Embedders/De-embedders

2.1

AAV-HD-XMUX(-T/R)/ AAV-SD-XMUX(-T/R)

Electrical video input AAV-HD-XMUX Video Data rate Video frame rate

270Mbps or 1,485Gbps 24p, 50i, 60i, 50p or 60p and pull down rates

AAV-SD-XMUX Video Data rate 270Mbps Video frame rate 50i and pull down 60i rates Equalisation Automatic up to 35dB Impedance 75 ohm Return loss >15dB up to 1,5GHz Signal level nom. 800mV Connector BNC

Optical video input Optical wavelength 1200-1620nm ±40 nm Maximum Optical power 0 dBm HD PIN. Min. Optical power HD/ SD -24/-28 dBm with HD PIN. Return loss Better than 27 dB. Maximum reflected power 0,04 Transmission circuit fibre Single mode HD PIN/ (Multi-mode option on request). Multi-mode PIN is standard with AAV-SD-XMUX Connector SC/UPC

Analogue audio inputs Number of inputs 4 Sampling frequency 48 kHz Differential input impedance 24 kohm Common mode input impedance 50 kohm Connector (C1 backplanes) DB-25F (Female with UNC threads) Max. signal level (0 dBFS) +12, +13.5, +15, +16.7, +18, +20, +21 or +24dBu. Level precision +- 0.1dB where Zsource < 40 ohm.

Common mode voltage tolerance +- 30V – (Maximum peak signal level) Frequency response 20 Hz – 20 kHz 0.1 dB Pass-band ripple +- 0.005 dB Stop band attenuation 80 dB Dynamic range Min. 103 dB (A), typical 107 dB(A) THD+N @ -1 dBFS Max. -90 dB, typical -96 dB. Intermodulation distortion Max. -90 dB, typical -95 dB. Crosstalk Max. -90 dB, typical -99 dB. CMRR (20 Hz – 15 kHz) Max. 70 dB @ 15 kHz, typical -90 dB @ lf.

Digital Audio Inputs Number of AES3 inputs Audio data rate

2 30 kHz to 200 kHz, converted to 48 kHz if not isochronous to the video input signal.

Input impedance 110 ohms transformer balanced.

Connector (C1 backplanes) DB-25F (Female with UNC threads) Embedded audio word length 20 or 24 bits Embedded audio Channel Status As received when isochronous, otherwise fixed.

Sample rate converter dynamic range 139 dB(A) @ 1kHz

Data inputs RS422 Connector UART mode Baud rates Data length Parity Stop bits GPI mode Raw data sampling freq.

1 8P8C Modular jack 9600 to 115200 7 or 8 bits None, odd or even 1, 1.5 or 2 bits 93750 Hz

Electrical video output Number of HD/SDI outputs 1 Connector BNC Impedance 75 ohm Return loss > 15 dB to1.5GHz Signal level nom. 800mV. Rise/fall time typically 650ps. @270Mbps. < 270ps @1.485Gbps

Optical video output Optical wavelength (13T) 1310nm ±40nm Light source FP semiconductor laser Optical power -7.5 dBm Extinction ratio >5:1 Optical wavelengths (13T0, 15T, CxxxxT) 1270, 1290, 1310, 1330, 1350, 1370, 1390, 1410, 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610nm ±6nm Light source DFB semiconductor laser Optical power 0 dBm Extinction ratio >10:1 Jitter (UI=unit interval) <0.135 UI @ SD, <0.2 UI @ HD Return loss better than 40 dB typ.

Maximum reflected power 0,04 Transmission circuit fibre 9/125um Single Mode Connector SC/UPC

Digital Audio outputs Number of AES3 outputs Audio data rate Impedance (C1 backplanes) Connector (C1 backplanes)

2 48 kHz 110 ohm transformer balanced.

DB-25F (Female with UNC threads)

Data outputs Number of RS485 outputs Connector

1 8P8C Modular jack

GPI outputs Signals Connector Signal type Maximum voltage Maximum current

Power status good, no video input lock, laser failure.

8P8C Modular jack Open drain transistor with free-wheel diode.

100 V 150 mA

network-electronics.com

| 123

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Embedders/De-embedders AAV-HD-DMUX(-R)/ AAV-SD-DMUX(-R)

HD/SD Analog / Digital Audio De-embedder

SD / HD

Optical Transmitter

Optical Receiver

optical fiber Re-clocker SDI/HD Input RS422

EDH/ DeSer.

Deembed.

Embedder

EDH/ Ser.

EQ

SDI/HD Output

EQ Audio Processing

Rx

SD / HD optical fiber

• Audio Matrix • Audio Delay • Group swapping • Video Generator • Audio Generator

Tx

RS422

A/D

ANA1

A/D

ANA2 AES1 AES2 AES3

Remote Control

Microcontroller

• AAV-HD-DMUX can handle SD and HD digital uncompressed video • AAV-SD-DMUX can handle SD digital uncompressed video • De-embed and embed all groups of audio • Copy or move audio groups without additional delay • De-embed 2 AES3 digital audio and non-audio signals • De-embed 4 analogue audio signals • Apply extra audio delay • Swap stereo channels • Make mono or sum from stereo signals • Have optical input • Transport asynchronous serial data • Generate video and audio signals • De-glitch correctly synchronised switched video

124 | network-electronics.com

AES4

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Embedders/De-embedders

2.1

AAV-HD-DMUX(-R)/ AAV-SD-DMUX(-R) Measurement conditions Audio Sampling rate 48 kHz Analogue audio output level setting +18 dBu = 0dBFS Ambient temperature 25ºC

General Power

+5V DC 0.69A 3.5W +-15V DC 0.02A 0.6W Control DIP switches, GYDA system controller.

Monitoring Front panel LEDs, GYDA system controller and GPI. EDH/CRC processing Full. Received flags are updated, new CRCs are calculated.

Boot time 1.2 second Digital audio outputs Conform to AES3-2003 Video inputs and outputs Conform to SMPTE 292M-1998 Data input and output Conform to EIA RS-485

Processing Video latency is variable due to the de-glitcher but the values below apply when the video signal is first applied. Other latency values are maximum values.

SD latencies Video

des+4+350+256+2+ser video samples = 45.3us Audio embedding AES+2+1+16 audio samples=20/48000 = 417us Audio de-embedding 4+16+1 audio samples =21/48000 = 438us Embedding GPI mode 8+4+32 96kHz samples =44/96000 = 458us Embedding UART mode 32+128+17+16 96kHz samples =193/96000 = 2.01ms De-embedding GPI mode 8+32+8 96kHz samples =44/96000 = 458us De-embedding UART mode 8+32+8 96kHz samples =48/96000 = 458us HD latencies Video

des+8+1024+1024+3+ser video samples = 27.6us Audio embedding AES+2+1+8=12 /48000 = 250us Audio de-embedding 2+8+1=11/48000 = 229us Embedding GPI mode 8+4+16 96kHz samples =28/96000 = 292us Embedding UART mode 16+128+17+16 96kHz samples =177/96000 = 1.84ms De-embedding GPI mode 4+16+8 96kHz samples =28/96000 = 292us De-embedding UART mode 4+16+8 96kHz samples =28/96000 = 292us

Electrical video input AAV-HD-DMUX Video Data rate Video frame rate

270Mbps or 1,485Gbps 24p, 25i, 30i, 50p or 60p and pull down rates. PsF formats are handled as interlaced.

AAV-SD-DMUX Video Data rate 270Mbps Video frame rate 25i and pull down 30i rates Equalisation Automatic up to 35dB Impedance 75 ohm Return loss >15dB up to 1,5GHz Signal level Nom. 800mV Connector BNC

Optical video input Optical wavelength 1200-1620nm ±40 nm Maximum Optical power 0 dBm HD PIN. Minimum Optical power HD/ SD -24/-28 dBm with HD PIN. Return loss Better than 27 dB. Maximum reflected power 0,04 Transmission circuit fibre Single mode HD PIN/ (Multi-mode option on request). Multi-mode PIN is standard with AAV-SD-DMUX Connector SC/UPC

Data inputs RS422 Connector

1 Modular jack 8P8C

Packet or UART mode Baud rates Data length Parity Stop bits

9600 to 115200 7 or 8 bits None, odd or even 1, 1.5 or 2 bits

GPI mode Raw data sampling frequency 93750 Hz

Electrical video output Number of HD/SDI outputs 1 Connector BNC Impedance 75 ohm Return loss > 15 dB to1.5GHz Signal level nom. 800mV. Rise/fall time typically 650ps. @270Mbps. < 270ps @1.485Gbps

Analogue audio outputs Number of outputs Sampling frequency Differential output impedance Common mode output impedance Connector (C1 backplane) Maximum signal level (0 dBFS) Common mode voltage tolerance Frequency response Pass-band ripple Stop band attenuation Dynamic range THD+N @ -1 dBFS Intermodulation distortion Crosstalk CMRR (1kHz BBC method)

4 48 kHz 53 ohms 20 kohm DB-25 female. +24dBu or lower in 0.5 dB steps. +-0.1 dB tolerance + 50V, -0V 20 Hz – 20 kHz +-0.2 dB +- 0.002 dB 82 dB Min. 98 dB (A) @ +12dBu = 0dBFS Max. 110 dB(A) @ +24dBu = 0dBFS Max. -90 dB, typical -96 dB. Max. -90 dB Max. -90 dB, typical -95 dB. Max. 46 dB, typical 65 dB.

Digital Audio outputs Number of AES3 outputs Audio data rate Impedance (C1 backplanes) Connector (C1 backplanes)

4 48 kHz 110 ohm transformer balanced.

DB-25 female.

Data outputs Number of RS485 outputs Connector

1 Modular jack 8P8C

GPI outputs Signals Connector Signal type Maximum voltage Maximum current

Power status good, no video input lock, laser failure.

Modular jack 8P8C Open drain transistor with free-wheel diode.

100 V 150 mA

network-electronics.com

| 125

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Embedders/De-embedders AVA-MUX, AVA-MUX-xxT

Analog Audio and Video Transport Module

CVBS or Y Line 1 Marking CVBS or C EDH processor

Audio 2R

Embedder

Serialiser

Audio 2L

SDI

Optical Output

Audio 1R Audio 1L

Occupies two slots

• 4 channel analog audio and video embedder • Termination switches and loop connectors for input video • Cascadable for additional audio channels • EDH insertion • 20 or 24 bit audio processing • Optional with optical output (AVA-MUX-xxT)

Measurement conditions Audio Sampling rate 48 kHz Ambient temperature 25ºC Measurement bandwidth 20 Hz-20 kHz Detector RMS Input overload level (0 dBFS) +18 dBu

SDI Output Video Data rate 270Mbps Number of SDI outputs 1 Connector BNC Impedance 75ohm Return loss > 15dB @270MHz Signal level nominal. 800mV Rise/fall time typically 650ps

General Power

+5V DC 0.94A 4.7W +15V DC 0.063A 0.95W -15V DC 0.027A 0.4W Control DIP switches, Gyda system controller Monitoring Front panel LEDs and Gyda system controller EDH processing Full. Received flags are updated, new CRCs are calculated Embedding level SMPTE S272M C Synchronous audio at 48 kHz and extended data packets (24 bit optional).

Embedded audio word length Configurable 20 or 24 bits.

Video processing word length 10 bits Audio delay 0.79 ms Video delay 132.3 μs

Audio Inputs Number of analog inputs 4 Differential Impedance 25 kohm, electronically balanced Connector DB25 pin, female Maximum signal level Configurable +12dBu to +24dBu (= 0dBFS) Common mode voltage tolerance ±30 V Frequency response 20Hz – 20kHz ±0.dB Passband ripple ±0.035dB Stop band attenuation 95dB Dynamic range1) Min. 101dB(A) (0dBFS = +12dBu), Typ. 107dB(A) THD+N @ -1dB FS Max. -85dB, Typ. < -95dB Intermodulation distortion2) @–12dB FS Max. -90dB Crosstalk Max. -80dB, 20Hz – 20kHz, Typ. -95dB CMRR (0 Hz – 8kHz) Min. 70dB, Typ. 80dB

126 | network-electronics.com

Optical Output (optional) Transmission circuit fiber Single mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ±40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ±40nm Optical power 0dBm Optical wavelength for CWDM See page 153 Optical power 0dBm Jitter (UI=unit interval) Max. 0.135 UI Return loss Typ. > 40dB Maximum reflected power 4% Connector SC/UPC

GPI GPI Output

Power good, SDI unlock, Embed error, Audio overload1, Audio overload2 GPI Connector RJ45 Signal type Open collector transistor Maximum voltage 50V Maximum current 400mA if only one output driven, 100mA all outputs driven

1) (THD+N of –60dB FS signal)| + 60 2) SMPTE 4:1 60 Hz + 7kHz

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Embedders/De-embedders

2.1

AVA-DMUX, AVA-DMUX-R

Analog Audio and Video Transport Module

Optical Input

Audio 2R Audio 2L Reclocker deserialiser

SDI

Audio 1R Audio 1L

De-embedder

Y, G or CVBS U, B or Y

Frame Synchroniser

Y, R or C

BB

CVBS, Y or BB

• 4 channel analog audio og video de-embedder • Component and composite video outputs • Cascadable for additional audio channels • EDH handling • Optional with optical input (AVA-DMUX-R)

Occupies two slots

Measurement conditions Audio Sampling rate 48kHz Ambient temperature 25 OC Measurement bandwidth 20 Hz-20kHz Detector RMS Input overload level (0dBFS) +18dBu

De-embedding level Audio Delay Video Delay

+5V/5.3W, +15V/1.5W, -15V/1.3W DIP switches/GYDA-SC Front panel LEDs and GYDA-SC Full. Received flags are updated, new CRCs are calculated SMPTE S272M C – Synchronous audio at 48kHz and extended data packets 0.67 ms (12+20 audio samples) 5.1us in minimum delay mode, 40ms or greater if frame buffer is used

SDI Video Input Video Data rate 270Mbps Video frame rate 50 Hz or 60 Hz Equalization Automatic up to 35dB Impedance 75ohm Return loss >15dB @270MHz Signal level nominally 800mV Connector BNC

Optical Input (optional) Transmission circuit fiber

Input signal Return loss Termination

SMPTE 170M / PAL ITU 624-4 > 35dB up to 5.75MHz 75ohm

Video Outputs Number of video outputs Formats

General Power Control Monitoring EDH processing

Black Burst reference input

Multi mode 50/125um, Single mode 9/125um comp.

Optical wavelength 1200-1620nm Maximum Optical power 0dBm Sensitivity -20dBm, typ. -25dBm Return loss Better than 40dB typ Maximum reflected power 4% Connector SC/UPC

4 YUV+CVBS, RGB+CVBS, YC+Y+CVBS, YC+BB+CVBS Connector BNC Impedance 75ohm Return loss > 35dB up to 5.75 MHz Signal level 1V

Audio Outputs Number of analog outputs Audio sampling frequency Impedance

4 electronically balanced 48kHz 50ohm differential, 5 kohm common mode Connector 25 pin D-sub De-embedded audio word length Up to 24 bits Frequency response1) 20Hz – 20kHz Dynamic range2) > 106dB(A) THD+N @ 0dBFS Better than 0.01%, –80dB Intermodulation distortion3) Better than 0.01%, –80dB Crosstalk < -90dB Noise < –75dBqp CCIR-468 weighted, < –90dBu A-weighted

GPI GPI Output

Power good, SDI unlock, de-embed error, audioA invalid, audioB invalid GPI Connector RJ45 Signal type Open collector transistor Maximum voltage 50 V Maximum current 400 mA if only one output driven, 100 mA all outputs driven 1) ±0.1dB relative to the level at 500 Hz 2) |THD+N @ -60dBFS A-weighted| + 60 3) SMPTE IM, 60 Hz + 7kHz 4:1 @ -12dBFS (RMS)

network-electronics.com

| 127

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1

The Global Video Transport Leader

128 | network-electronics.com

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

HD to SD Downconverter with Framesync and ARC

2.1

DWC-HD-DMUX

HD Down-Converter with Optical Input and Audio Decoding

HD/SD input Optical HD/SD input electrical

HD/SD OuT

reclocker/ De-serialiser

2x2 x-point HD/SD OuT

analog Video Outputs

SD

cVbS/cVbS/Y/g HD/SD De-ebedder

HD

SD Down Scaler

SD Frame buffer

SD re-embedder

Video Dac

cVbS/Y/cb/b cVbS/c/cr/r

Digital audio

audio Proc

audio buffer

audio Matrix

Stereo audio Dac

Stereo audio analog OuT

Digital audio OuT

General Power Control Monitoring

• Broadcast quality • Optical input with direct reclocked electrical output • High quality down-conversion • Analog audio monitoring • SDI and analog high quality video output • Audio delay • Internal video and audio generator • SD framestore for down-converted output • Sync input • PhaseTru™ technology improves 1080i to 576i/480i conversion

Audio outputs 5V, +/-15V DC, <7W DIP switches, GYDA system controller.

Front panel LEDs, GYDA system controller.

Electrical video input Video Data rate

270Mbps or 1,485Gbps; Conform to SMPTE 292M-1998, SMPTE 259M-C Video frame rate 1080i/29.97; 1080p/23.976; 1080i/25; 1080p/25; 720p/59.94; 720p/50 Equalization Automatic up to 35dB (eq. 300m @270Mbps with Belden 8281 / 100m @1485Mbps with Belden 1694A) Impedance 75 ohm Return loss >15dB up to 1,5GHz Signal level nom. 800mV Connector BNC

Number of AES3 outputs 1 AES3 audio data rate 48 kHz Connector AES3 RJ45 Number of balanced analog stereo audio outputs 1 Connector analog audio WECO screw terminal

Versions / options DWC-HD DWC-HD-DMUX DWC-HD-R

DWC-HD-DMUX-R

Optical video input Optical wavelength Maximum Optical power

1200-1620nm

–3 dBm HD PIN. Minimum Optical power HD/ SD –22/–28 dBm with HD PIN. Return loss better than 27 dB. Maximum reflected power 4% Transmission circuit fiber Single mode HD PIN/ (Multi-mode option on request) Connector SC/UPC

DWC-HD-M

DWC-HD-M-DMUX

DWC-HD-M-R

DWC-HD-M-DMUX-R

Electrical video output Number of HD/SDI outputs 2 Connector BNC Impedance 75 ohm Return loss > 15 dB to1.5GHz Signal level nom. 800mV. Number of Analog Video outputs 3 Analog Video output formats 3 x CVBS. component G/B/R, component Y/ Pb/Pr or S-video. PAL and NTSC. Connector BNC Impedance 75 ohm Return loss > 35 dB to30 MHz

HD down converter, SD/CVBS output HD down converter, SD/CVBS output, AES/ EBU and Stereo Analog Audio output HD down converter with high sensitivity 9/125um single mode optical input, SD/ CVBS output HD down converter with high sensitivity 9/125um single mode optical input, SD/ CVBS output, AES/EBU and Stereo Analog Audio output HD down converter for monitoring applications, SD/CVBS output, without Genlock HD down converter for monitoring applications, SD/CVBS output, without Genlock, AES/EBU and Stereo Analog Audio output HD down converter with high sensitivity 9/125um single mode optical input, for monitoring applications, SD/CVBS output, without Genlock HD down converter with high sensitivity 9/125um single mode optical input, for monitoring applications, SD/CVBS output, without Genlock, AES/EBU and Stereo Analog Audio output

network-electronics.com

| 129

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Video Conversion ADC-SDI

ADC-SDI-CC

NTSC/PAL to SDI Decoder

Video A/D Converter and Decoder

Loop

CVBS/Lum2 Genlock

Loop

SDI 1

CVBS/Y ADC CVBS/C

PAL/NTSC Field 1 Insertion

Genlock

Red/Pr

SDI 1

ADC Green/Y

EDH

Decoder

PAL/NTSC Field 1 Insertion

Decoder

SDI 2 Blue/Pb/Crom2

EDH

Video Buffer

SDI 3 Microcontroller

Input

Output 4:2:2 SMPTE 259M-C, 270Mbps > 15dB @ 270MHz nom. 800mV

Processing Performance Quantisation Sampling Video bandwidth SNR (unweight) Diff. gain Diff. phase Power

Microcontroller

Remote Control

• 10-bit component, composite or Y/C to SDI converter • Built-in video PROC-AMP • 3 SDI outputs • 5 line adaptive comb filter and selectable filter settings • Automatic standards detection • EDH processing

Digital Serial Output

Formats Composite Video PAL (625/50) NTSC (525/60) Y/C (S-Video), with active loopthrough Return loss >35dB up to 5.75MHz Signal Level nom 1000mV, ± 10mV

Signal (3x) Return loss Signal level

SDI 3

Remote Control

• 10-bit composite to SDI decoder • Automatic standards detection • EDH processing • 2x oversampling (27MHz) • Analog inputs w/ loop-through, 3 SDI outputs • 3-line adaptive comb filters and selectable filter settings

SDI 2

10 bits 27MHz (2x oversampling) 6MHz > 60dB < 0.6% < 1.00° + 5VDC / 2.2W, - 15VDC / 0.7W

SELECTABLE LUMA/CHROMA SEPARATION FILTERS • Adaptive 3-line comb filter • Fixed 2-line comb filter • Low-pass/bandpass

Signal type SMPTE 259M / ITU-R BT.601 Connector BNC Impedance 75ohm Return loss >15dB @ 270MHz Jitter < 0.2UI Peak to peak signal level 800mV ± 80mV

Composite and Y/C Input Signal type Composite video, PAL 625/50Hz or NTSC 525/60Hz Y / C (S-video) Connector BNC Impedance 75ohm Signal level 1Vp-p Return loss >40dB

Component and RGB Input Signal rate 625/50Hz or 525/60Hz Signal type RGB without setup, with separate sync.

SMPTE / EBU Y, Cr, Cb Connector BNC Impedance 75ohm Signal level Y = 1Vp-p. Cb, Cr, R, G, B = 0.7Vp-p Return loss >40dB

Processing Performance Signal path Sampling Luma/Chrome separation Video bandwidth Hue Accuracy Color Sat. Accuracy Luminance Nonlinearity SNR (unified weighted) Diff. gain Diff. phase Video processing delay Power

130 | network-electronics.com

10 bits 27MHz, 2 x oversampling Selectable 5 line adaptive comb filter or chroma trap filter 6MHz 0.5° typical 0.8% typical 0.6% typical 66dB typical <1.0% <1.0° 3 video lines +5V DC / 2.75W, -15V DC / 0.5W

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Video Conversion

2.1 DAC-SDI

SDI to NTSC/PAL Encoder and D/A Converter

Loop SDI

H-Phase Adj. EQ

Re-clocker

Frame Buffer

G/Y/CVBS

Filter

10-Bit Encoder/ DAC

EDH

Genlock

B/U/Cuma R/V/Luma CVBS/Y/ Black Burst

Microcontroller

Remote Control

• 10-bit SDI to composite encoder and 10-bit SDI to component converter in one product • Built-in frame synchronizer w/ sub-carrier and horizontal phase adjustment • Large frame buffer (4 frames) • EDH monitoring • 4x oversampling (54 MHz) • SDI input w/ loop-through, 4 analog outputs

Digital Serial Input

Analog Output

Signal

4:2:2 SMPTE 259M-C, 270Mbps, with active loop through Equalization Automatic Impedance 75 ohm Return loss >15dB @ 270MHz Signal level nom. 800mV Connector BNC

Black&Burst input Input Signal Composite PAL 625/50 or NTSC 525/60 Return loss > 35 dB up to 10MHz

Digital Serial Output Connector BNC Impedance 75 ohm Return loss >15dB @ 270MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V

Frame Delay output Output level

Open collector pulled high to 5V.

Connector BNC Impedance 75 ohm Formats Composite video, PAL 625/50 or NTSC 525/60, RGB, YUV / YCrCb Y / C (S-video), Composite and Component video is provided simultaneously Signal level 1Vp-p Return loss >35dB up to 10MHz Minimum signal delay 3µs Signal delay when locked to Black&Burst 1-2 Frames

Processing Performance Signal path Sampling Video bandwidth Hue Accuracy Color Saturation Accuracy Luminance Nonlinearity Chroma AM Noise Chroma PM Noise SNR Diff. gain Diff. phase Power

10 bits 54MHz, 4 x oversampling 6MHz 0.5° typical 0.8% typical 0.6% typical -62dB typical -72dB typical -70dB typical <1.0% <1.0° +5V DC / 3.1W, -15V DC / 0.7W

network-electronics.com

| 131

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Audio Conversion DAC-AES

ADC-AES

Dual Audio D/A Converter

Dual Audio A/D Converter Bal. Input

ANA1A

AES1

ANA2A AES Receiver Re-clocker

D/A

Lowpass filter + gain

ANA1B ANA2B

Gain Setting

A/D

AES Format + Driver

ANA1

AES1A

ANA2

AES1B

ANA3

AES2A

ANA4 AES2

ANA3A

II

AES2B

ANA4A ANA3B

AES Sync. Ref.

Clock Control PLD

Microcontroller

Microcontroller

AES Receiver

ANA4B

Remote Control

Remote Control

• 24-bit high performance AES to analog audio converter • Two independent converters on one board • Typical dynamic range of 120dBA • Transformer balanced AES inputs • Allows sampling rates from 32–96kHz

• 24-bit high performance analog audio to AES converter • Two independent converters on one board • Typical dynamic range of 117dBA • Transformer balanced AES outputs • Internal sampling rates 44.1, 48 and 96kHz Also available with 75ohm AES-3id backplane

Analog outputs Number of outputs Frequency response Passband ripple Group delay Stopband attenuation Dynamic range THD+N @ -1dB FS Crosstalk Output differential impedance

Analog inputs 2x 4 electronically balanced 20Hz > –0.1dB > 20kHz ±0.0002dB 43.5 samples 110dB Min. 112dBA, Typ. 120dBA Max. –90dB, Typ. –100dB Max. –100dB, Typ. –110dB 50 ohm

AES Audio Input Number of inputs 2 transformer. balanced Format AES3-1992 Impedance 110ohm Connector DB15-110ohm Sampling rates 29kHz–100kHz

GEneral Power +5V/1.4W / ±15V/3.5W Control Control system for access to set-up and module status with BITE (Built-In Test Equipment)

Number of inputs Frequency response Passband ripple Common mode voltage tolerance Group delay Stopband attenuation Dynamic range THD+N @ -1dB FS Crosstalk CMRR Input differential impedance

4 electronically balanced 10Hz > –0.1dB > 21.5kHz ±0.001dB +/- 30V 65 samples 110dB Min. 112dBA, Typ. 117dBA Max. -95dB, typ. -102dB Min. –100dB, Typ. –110dB Min. 70dB, Typ. 80dB 25kohm

AES Audio Outputs AND SYNC. REF INPUT Number of outputs 2x2 transformer. balanced Format AES3-1992 Impedance 110ohm Connector DB15-110ohm Internal sampling rates 44.1kHz, 48kHz, 88.2kHz External synchronisation AES3 on DB15 connector Sync. input impedance 110ohm External sampling rates 29kHz–100kHz

GEneral Power +5V/2.4W / ±15V/2.1W Control Control system for access to setup and module status with BITE (Built-In Test Equipment)

132 | network-electronics.com

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Synchronisation DLY-AES

LIS-SDI

Dual AES Audio Delay

SDI Line Synchronizer

Tracking Input

Tracking Control

AES 1

SRC

AES 2

SRC

Delay Control Input GPI x 2

2.1

Dip Sw. Setting

Delay

M U X

Delay Delay Control

d d

AES 1 (1)

Ref

AES 1 (2)

Loop

AES 2 (1)

SDI in

Sync. Sep.

Line synchroniser

EDH insertor

SDI 2 SDI 3

SDI loop

Reference Input Black Burst

SDI 1 Reclocker & EDHanalyser

AES 2 (2)

Clock Control PLD

AES-11

Tracking Delay Output

Genlock

Microcontroller

Remote Control

Microcontroller

• 2 independent audio delay signal paths • Built-in sample rate converter accepting 32, 41.1, 44.1kHz • Black-burst and AES-11 reference input • Up to 10s delay at 48kHz • Simultanous fixed delay and externally switchable dynamic delay • Delay tracking input for synchronisation with DAC-SDI, FRSSDI or other video devices • 2 AES outputs per delay line • Transformer balanced AES in- and outputs

Remote Control

• SDI 10 bit 4:2:2 line synchronizer • Analog Black Burst genlock • EDH insertion and handling in accordance with SMPTERP165 • SDI 4:2:2 input with one active loop-through output • 3 x SDI 4:2:2 line synchronized outputs • Automatic detection of 525- and 625-line format input

DIGITAL SERIAL INPUT Input format

General Power Control Monitoring

+5V DC approx. 0.3A 1.5W DIP switches, GYDA-SC Front panel LEDs and GYDA-SC

Inputs (AES3-1995) Number 2 Connector DB25 female Sample rate converter word-length 24 bits Sample rates Any between 1/3 and 3 times the reference sample rate

Reference Input Format AES11 (AES-3-ID) or analog video Connector BNC Reference Sample rate from video 48kHz Sample rates from 48, 44.1, 32kHz

Outputs (AES3-1995) Number 4 Connector DB25 female Usage Either dual outputs from delay lines 1 & 2 or quad outputs from delay line 1

Delay Minimum delay Maximum tracking delay Maximum fixed delay @ 48kHz Maximum fixed delay @ 44.1kHz Maximum fixed delay @ 32kHz

92 samples at 48kHz 230ms 10.6s 11.6s 16.1s

270Mbps scrambled NRZI 4:2:2 video (SMPTE 259M) Equalization Automatic up to 30dB Signal level 800mV nominal Return loss >15dB @ 270MHz Impedance 75 ohm Connector BNC

DIGITAL SERIAL OUTPUT Output format

270Mbps scrambled NRZI 4:2:2 video (SMPTE 259M) Number of outputs 3 synchronized outputs, 1 buffered loop of input Signal level 800mV nominal Rise/fall time typ. 650ps Jitter 0.2UI max.

Return loss >15dB @ 270MHz Impedance 75 ohm Connector BNC

REFERENCE INPUT Input format Black Burst, Composite analog (NTSC SMPTE 170M / PAL ITU 624-4) Signal level 1Vp-p Impedance 75 ohm, loop must be terminated with 75 ohm Connector BNC

DELAY ADJUSMENTS Minimum delay Maximum delay Resolution

39 samples 1 line + 39 samples down to video sample resolution

Power Input voltage

5VDC/3.0W, -15VDC/0.3W

network-electronics.com

| 133

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Synchronisation FRS-SDI

SDI Frame Synchronizer

Tracking Delay Output

Genlock

Ref Loop

Reclocker & EDHanalyser

SDI in

Frame synchroniser and Delay adj.

SDI 1 EDH insertor

SDI 2 SDI 3

Black Video Generator

SDI loop

Microcontroller

Remote Control

• SDI 10 bit 4:2:2 frame synchronizer with embedded audio handling • Analog Black Burst genlock • Selectable freeze on last good frame or black video on error or on loss of input signal • EDH insertion and handling in accordance with SMPTE-RP165 • Wide delay range, from 128us up to 232ms ­(Sample, H and V adjustment) • Audio delay tracking output • SDI 4:2:2 input with one active loop-through output • 3 x SDI 4:2:2 synchronized outputs • Automatic detection of 525- and 625-line format input

DIGITAL SERIAL INPUT Input format

270Mbps scrambled NRZI 4:2:2 video (SMPTE 259M) Equalization Automatic up to 30dB Signal level 800mV nominal Return loss >15dB @ 270MHz Impedance 75 ohm Connector BNC

DIGITAL SERIAL OUTPUT Output format

270Mbps scrambled NRZI 4:2:2 video (SMPTE 259M) Number of outputs 3 synchronized outputs, 1 buffered loop of input Signal level 800mV nominal Rise/fall time typ. 650ps Jitter 0.2UI max.

Return loss >15dB @ 270MHz Impedance 75 ohm Connector BNC

REFERENCE INPUT Input format Black Burst, Composite analog (NTSC SMPTE 170M / PAL ITU 624-4) Signal level 1Vp-p Impedance 75 ohm, loop must be terminated with 75 ohm Connector BNC

DELAY ADJUSTMENTS Minimum delay Maximum delay Resolution

120us or 2 video lines 232ms down to video sample resolution

POWER Input voltage

5VDC/3.0W, -15VDC/0.3W

134 | network-electronics.com

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Synchronisation

2.1 FRS-HD-DMUX

HD frame synchroniser with optical input • Optical input (option) • HD/SD video support • De-glitching of input signal.

• Audio de-embedding – processing – re-embedding • Audio fade out/fade in • Audio router • Audio delay • Frame Sync, adjustable up to 8 frames • Change-over and input priority between optical and electrical input, selectable • Sync input, either PAL, NTSC or HD Tri-level • Video luma, chroma, gain and level adjustment • 4 video outputs, either reclocked input or frame synchronised • AES3 (48kHz), or RS-422 data available on 1 port, synchronous to video signal • Frame delay output on GPI connector

General Power Control Monitoring EDH/CRC processing

Audio/ data outputs 5V, +/-15V DC, <5W DIP switches, GYDA system controller.

Front panel LEDs, GYDA system controller and GPI Full. Received flags are updated, new CRCs are calculated

Number of AES3 / RS-422 data outputs 1 AES3 audio data rate 48 kHz Connector AES3 / RS-422 RJ45 Number of analog stereo audio outputs 1 Connector analog audio WECO screw terminal

Electrical video input Video Data rate

270Mbps or 1,485Gbps; Conform to SMPTE 292M-1998, SMPTE 259M-C Video frame rate 24p, 50i, 60i, 50p or 60p and pull down rates Equalization Automatic up to 35dB (eq. 300m @270Mbps with Belden 8281 / 100m @1485Mbps with Belden 1694A) Impedance 75 ohm Return loss >15dB up to 1,5GHz Signal level nom. 800mV Connector BNC

Min. Optical power HD/ SD Return loss Max. reflected power Transmission circuit fiber Connector

Signals

Power status good, no video input lock, Frame delay Connector RJ45 Signal type Open drain transistor with free-wheel diode

Applications Any professional broadcast application where HD/SD frame synchronisation is requested.

Versions / options FRS-HD-SDI

Optical video input Optical wavelength Max. Optical power

GPI outputs

1200–1620nm

FRS-HD-DMUX

-3dBm HD PIN -22/-28dBm with HD PIN. better than 27dB 4% Single mode HD PIN/ (Multi-mode option on request) SC/UPC

FRS-HD-SDI-R

FRS-HD-DMUX-R

SD/HD frame sync with internal audio handling and GPI I/O control, 4 SDI outputs SD/HD frame sync, analog stereo audio out, AES out (or RS-422 data out, replaces AES), 4 SDI outputs SD/HD frame sync with high sensitivity 9/125um single mode optical input, internal audio handling and GPI I/O control, 4 SDI outputs SD/HD frame sync with high sensitivity 9/125um single mode optical input, analog stereo audio out, AES out (or RS-422 data out, replaces AES), 4 SDI outputs

Electrical video output No. of HD/SDI outputs 4 Connector BNC Impedance 75 ohm Return loss > 15 dB to1.5GHz Signal level nom. 800mV.

network-electronics.com

| 135

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Automatic Changeover Modules HDSDI-CHO-2x1

SDI-CHO-2x1

HD Changeover

SDI Changeover

Equaliser

Equaliser Outputs: HD/SD1 HD/SD2

HD/SD Main input Bypass

Switch 2x1

Bypass

Reclocker

Equaliser HD/SD Standby input

Outputs: SD1 SD2

SD Main input

HD/SD3 HD/SD4 Bypass 177M / ASI

SD Standby input

Bypass

SD3 SD4 Bypass 177M / ASI

Remote Control

Microcontroller

• Multi-rate changeover • Non-broadcast data rates also supported non-reclocked • Auto changeover on signal loss or reclock error • Configurable change back logic • Reports signal loss and bitrate • GPI control and alarms • Integrated DA with 4 re-clocked HD/SDI outputs

Electrical Input Number of input 2 Data rate NRZ 1 to 1485Mbps Equalization Automatic. Cable reclocker can be bypassed to support bit rates down to 1Mbps Impedance 75 ohm Return loss >= 15dB @ 1485MHz Signal level nom. 800mV. App. 200mV min. when equaliser switched to Bypass Connector BNC

Electrical Output Number of outputs 4 Connector BNC Impedance 75 ohm Return loss >= 15dB @ 1485MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity 2 outputs non inverting, 2 outputs inverting

Features Re-clocking Automatic clock rate detection.

Supported clock rates: 143, 177, 270, 360, 540 and 1485Mbps

GEneral Power +5V DC / 3W Max. Control Control system for access to set-up and module status with BITE (Built-In Test Equipment)

Supported standards SMPTE 292M, SMPTE 259M, SMPTE 305.2M, SMPTE 310M, SMPTE 344M DVB-ASI EN50083-9

136 | network-electronics.com

Reclocker

Bypass Microcontroller

SMPTE

Switch 2x1

Equaliser

Remote Control

• SDI changeover • Non-broadcast data rates also supported non-reclocked • Auto changeover on signal loss or reclock error • Configurable change back logic • Reports signal loss and bitrate • GPI control and alarms • Integrated DA with 4 re-clocked SDI outputs

Electrical Signal Inputs Number of inputs Standard Data Rate Connector Impedance Return Loss Cable Equalization

2 SMPTE 259M 1Mbps–540Mbps 75 ohm BNC female 75 ohm nominal > 15dB (5MHz–270MHz) 0 to 300m typical Belden 8281A

Electrical Signal Outputs Number of outputs Connector Signal Level Signal Polarity Impedance Return Loss

4 75 ohm BNC female 800mVp-p ±10% 2 outputs non-inverting, 2 outputs inverting 75 ohm nominal > 15dB (5MHz–270MHz)

Features Re-clocking rates Supported standards

143, 177, 270, 360, 540Mbps SMPTE 259M, 305.2M, 344M, 310M, DVB-ASI EN50083-9, AES-3id Re-clocking Configurable automatic mute or bypass when not locked Input equaliser Bypass for non-video formats

Control Interfaces Control Control system for access to set-up and module status with BITE (Built-In Test Equipment)

Electrical Power

+5V DC / 3W

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Optical Converters

2.1 SDI-EO

SDI Electrical to Optical Converter Inputs Optical Transmitter

SDI Input 19.4540Mbps

Optical Output

Equaliser

Distribution Amplifier

Data rate NRZ 19.4Mbps – 540Mbps Equalization Auto. up to 35dB Impedance 75 ohm Return loss >15dB @270MHz Signal level nom. 800mV Connector BNC

2 x SDI Output

SDI Output Number of outputs 2 Connector BNC Impedance 75 ohm Return loss > 15dB @270MHz

• Built-in dual output Distribution Amplifier • High performance laser for the long haul • DVB-ASI compatible • SMPTE 259M/297M compliant

Signal level Rise/fall time

nom. 800mV typ. 650ps

Standards Supported standards for electrical and optical ports: SMPTE 259M, SMPTE 297M, SMPTE 305.2M, SMPTE 310M DVB-ASI EN50083-9

SDI-EO-13T/15T

CWDM

DWDM

GEneral

GEneral

GEneral

Power Control

+5V DC / 1.6W Control system for access to set-up and module status with BITE (Built-In Test Equipment)

Optical Output Transmission circuit fiber Single mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Jitter (UI=unit interval) 0.135 UI max.

Connector return loss Better than 40dB typ.

Maximum reflected power 4% Connector SC/UPC according to SMPTE-297M

Power Control

+5V DC / 1.6W Control system for access to set-up and module status with BITE (Built-In Test Equipment)

Optical Output Transmission circuit fiber Single mode 9/125um Light source DFB Laser Optical wavelength See page 153 Optical power 0dBm Jitter (UI=unit interval) 0.135 UI max.

Connector return loss Better than 40dB typ.

Maximum reflected power 4% Connector SC/UPC according to SMPTE-297M

Power Control

+5V DC / 10W Max. 5W typically Control system for access to set-up and module status with BITE (Built-In Test Equipment)

Optical Output Transmission circuit fiber Single mode 9/125um Light source DFB Laser Optical centre wavelength See page 153 Optical power 0dBm (optionally +5dBm) Max. wavelength drift ± 0.16nm Jitter (UI=unit interval) 0.135 UI max. @ 270Mbps Connector return loss Better than 40dB typ.

Maximum reflected power 4% Connector SC/UPC acc. to SMPTE 259M

network-electronics.com

| 137

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Optical Converters SDI-EO-2

Dual SDI Electrical to Optical Converter

SD/ASI Input 1 19.4540Mbps

SD/ASI Input 2 19.4540Mbps

Equaliser

Optical Transmitter Optical Output 1 SD/ASI Output 1 19.4540Mbps

Bypass

Equaliser

Optical Transmitter Optical Output 2 SD/ASI Output 2 19.4540Mbps

Bypass

Microcontroller

Remote Control

• High-density packaging in the ultra compact 2RU frame • 1310nm, 1550nm and CWDM laser available • High performance laser for the long haul • Full DVB-ASI compatibility • Active looped SDI output • Also available with reclocking

Inputs Data rate NRZ 19.4 to 540Mbps Equalization Automatic. Cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps Impedance 75 ohm Return loss >15dB @ 270MHz Signal level nom. 800mV Connector BNC

Optical Output Transmission circuit fiber Light source Optical power Optical centre wavelength Temp. range Jitter (UI=Unit Interval) Connector return loss Maximum reflected power Connector

General Power +5V DC / 3.5W Max. Control Control system for access to setup and module status with BITE (Built-In Test Equipment)

Standards Supported standards for electrical and optical ports: SMPTE 259M, SMPTE 297M, SMPTE 305.2M, SMPTE 310M DVB-ASI EN50083-9

Electrical Output Number of outputs 1 per converter Connector BNC Impedance 75 ohm Return loss >15dB @ 270MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity Non inverting

SD/ASI Input 1 19.4540Mbps

SD/ASI Input 2 19.4540Mbps

Equaliser

Optical Transmitter Optical Output 1

Reclocker Bypass

Equaliser

SD/ASI Output 1 19.4540Mbps

Bypass 177M/ASI

# 2x2

Optical Transmitter Optical Output 2

Reclocker Bypass

SD/ASI Output 2 19.4540Mbps

Bypass 177M/ASI

Microcontroller

Also available with reclocking (SDI-EO-2-RC)

138 | network-electronics.com

Single mode F-P / DFB laser -7.5dBm @1310nm, 0dBm (DFB laser) 1310, 1550 or CWDM See page 153 0 to +40 °C 0.135 UI max. @ 270Mbps, >40dB w/SM fiber 4% SC/UPC

Remote Control

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Optical Converters

2.1

SDI-OE-S / SDI-OE-L / MF-OE-NRC

SDI-OE-2

SDI Optical to Electrical Converter

Dual SDI Optical to Electrical Converter Optical receiver Optical Input 1

Optical Receiver SDI Input Processor Optical Input

Reclocker

2 x ASI / 2 x SD / HD Output 1 19.4540Mbps

Reclocker Bypass 177M/ASI

Distribution Amplifier

#

2 x SDI Output 19.4–540Mbps

Optical receiver Optical Input 2

2x2

2 x ASI / 2 x SD / HD Output 2 19.4540Mbps

Reclocker Bypass 177M/ASI

Microcontroller

• High sensitivity receiver • Built-in dual output Distribution Amplifier • DVB-ASI compatible • SMPTE 259M/297M compliant

Optical Input Data rate optical Sensitivity

Maximum input power Optical wavelength Transmission Circuit fiber

Remote Control

• High-density packaging in the ultra compact 2RU frame • High sensitivity receiver • Full DVB-ASI compatibility • Built-in crossover allowing wavelength swap and emergency switching • Re-clocker bypass for non-video formats • 2 Output Distribution Amplifier

Optical Input 19.4Mbps – 540Mbps SDI-OE-S –20dBm typ.

SDI-OE-L Better than

–30dBm typ.

MF-OE-S-NRC –20dBm typ.

SDI-OE-S -6dBm SDI-OE-L 0dBm 1200-1620nm

Multi mode 50/125um, Single mode 9/125um compatible Return loss Better than 40dB w/Single mode fiber (typ.)

Detector overload threshold min. –6dBm, typ. –3dBm Connector SC/UPC

GEneral Power SDI-OE-S and MF-OE-S-NRC + 5V DC /1.7W Power SDI-OE-L +5V DC/1.6W, -15V DC/0.15W Control Control system for access to set-up and module status with BITE (Built-In Test Equipment)

SDI Output Number of outputs 2 Connector BNC Impedance 75 ohm Return loss > 15dB @270MHz Signal level nom. 800mV Rise/fall time typ. 650ps Jitter (UI= Unit Interval) 0.2 UI max.

Data rate optical 19.4 to 540Mbps Sensitivity: for SDI (270Mbps) Better than –30dBm Detector overload threshold min. -6dBm Optical wavelength 1200–1620nm Transmission circuit fiber Multi mode 50/125um, Single mode 9/125um compatible Connector return loss >40dB w/SM fiber Detector damage threshold >+1dBm Connector SC/UPC

General Power +5V DC / 3.2W Max. Control Control system for access to setup and module status with BITE (Built-In Test Equipment)

Electrical Output Number of outputs 2 per converter Connector BNC Impedance 75 ohm Return loss >15dB @ 270MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity 2 non inverting

Standards Supported standards for electrical and optical ports: SMPTE 292M, SMPTE 259M, SMPTE 297M, SMPTE 305.2M, SMPTE 310M, DVB-ASI EN50083-9

network-electronics.com

| 139

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Optical Converters SDI-TR / SDI-TR-D15xx and SDI-TR-C1xxx / MR-TR-2.5G (STM16 / OC48) / MR-TR-13T / MR-TR-D15xx.xx / MR-TR-C1xxx

Optical Converter and Transponder Optical Transmitter Optical Receiver

Input Processor

Optical Input

SDH / 1000BaseLX CDR

Optical Output 3x1 MUX

Equaliser

HD/SD/ASI CDR Distribution Amplifier

SD/HD/ASI Input 19.4–1485Mbps

Microcontroller

Input / CDR Select

The MR-TR-2.5G is a multi bit-rate converter and transponder module providing high performance media conversion for various signal formats from 19.4Mbps up to 2488Mbps. The unit can be configured as an Electrical to Optical or Optical to Electrical converter, or as an Optical to Optical Transponder. The unit provides a high sensitivity optical receiver and lasers 1310, 1550, CWDM and DWDM. Unmatched signal accuracy, even in critical applications with pathological signal patterns makes the MR-TR-2.5G the first choice for all optical transport demands.

The MR-TR-2.5G can transport all HD and SD signal formats in addition to DVB-ASI and SMPTE 310M. It can perform optical refreshing, reclocking and wavelength swapping up to 2488Mbps.

Optical Input Data rate optical

Remote Control

The input sensitivity is typically Better than –20dBm at 2488Mbps.

The open system platform of Network Electronics DWDM multiplexing technology allows easy interoperability with third party fiber optical systems.

The electrical input is equipped with a multi rate cable equaliser providing an Equalization of typically 100m of high quality coax cable at 1485Mbps. A distribution amplifier with 2 outputs reduces the need for additional DAs (for DVB-ASI only one can be used).

Electrical Input See table

Sensitivity for HD-SDI (1485Mbps) Better than –20dBm for SDI (270Mbps) Better than –25dBm for SDI (270Mbps) Better than –30dBm a) for SDH /SONET (622Mbps) Better than –25dBm for SDH /SONET (2488Mbps) Better than –20dBm for 1000BaseLX (1250Mbps) Better than –25dBm Detector overload threshold min. -3dBm Optical wavelength 1200–1620nm Transmission circuit fiber Single mode 9/125um Transmission circuit fiber Multi mode 50/125um, single mode 9/125um compatible a) Connector return loss >40dB w/SM fiber Detector damage threshold >+1dBm Connector SC/UPC

Optical Output Transmission circuit fiber Light source (13T versions) Light source (DWDM/CWDM) Optical power Optical centre wavelength for DWDM Optical centre wavelength for CWDM Max. wavelength drift Jitter (UI=Unit Interval)

1 x ASI / 2 x SD / HD Output

Bypass 177M / ASI

Bypass

• Multirate optical to optical transponder for 19.4 – 2488Mbps • O/E, E/O converter • 1550nm, CWDM and DWDM laser available • Supports SDI, HD-SDI, SMPTE 310 M, DVB-ASI, SDH/SONET up to STM-16/ OC-48, Gigabit Ethernet and many other signal formats • Performs 3R Regeneration

Single mode 9/125um F-P/DFB Laser (-7.5dBm or 0dBm) DFB Laser 0dBm (optionally +5dBm for DWDM) See page 153

See page 153 +/- 0.16nm (DWDM) 0.135 UI max. @ 270Mbps, 0.2 UI max. @ 1485Mbps Connector return loss >40dB w/SM fiber Maximum reflected power 4% Connector SC/UPC

Data rate NRZ 19.4 to 1485Mbps Data rate NRZ 19.4 to 540Mbps a) Equalisation Automatic. Cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps.

Impedance 75 ohm Return loss >15dB @ 1485MHz Return loss >15dB @ 270MHz a) Signal level nom.

800mV Connector BNC

Electrical Output Number of outputs 2 Connector BNC Impedance 75 ohm Return loss >15dB @ 1485MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity 1 non inverting, 1 inverting

Standards Supported standards for electrical and optical ports (MR-TR-2.5G, other versions see table): SMPTE: SMPTE 292M, SMPTE 259M, SMPTE 297M, SMPTE 305.2M, SMPTE 310M, DVB-ASI: EN50083-9 Additional supported standards for the optical ports, only optical transponder configuration: SDH / SONET: STM1 / OC3, STM4 / OC12, STM16 / OC 48 Gigabit Ethernet: IEEE 802.3, 1000BaseLX for SM fiber DWDM wavelengths ITU-T G.694.1 CWDM wavelengths: ITU-T G.694.2 a)

SDI

Supported signal formats

GENERAL Power

+5V DC / 10W Max. 5W typically (DWDM) +5V DC / 3W typically (13T and CWDM) Temperature range 0-40deg C (DWDM), 0-50degC (13T and CWDM) Control Control system for access to setup and module status with BITE (Built-In Test Equip.)

140 | network-electronics.com

ELECTRICAL PORTS Digital video [Mbps] 19.4-540

1483.5 1485

OPTICAL PORTS GbE

STM-1/ OC3

STM-4/ OC12

STM-16/ OC48

1250

155.52

622.08

2488.32

SDI-TR

X

X

X

X

MR-TR

X

X

X

X

X

MR-TR-2.5G

X

X

X

X

X

X

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Optical Converters

2.1 MR-TR-3G

Optical Converter and Transponder

Optical Receiver

Input Processor

Optical Input

SDH / 1000BaseLX CDR

3x1 SWITCH

Optical Transmitter Optical Output

HD/SD/ASI CDR

Bypass Input / CDR Select

2x1 SWITCH Equaliser SD/HD/ASI Input 143–2970Mbps (Add 1)

HD/SD/ASI CDR

• Transmitter and receiver in the same module – Add and drop signals in a DWDM ring structure • Full frame population due to reduced power consumption – Up to 8 modules per frame • 16 3G-SDI signals (8 in each direction) on the same fiber in just 2RU each end • Up to 40 3G-SDI signals on a single fiber using DWDM • High sensitivity optical receiver

Distribution Amplifier 1 x ASI / 2 x SD / HD Output

Bypass Bypass Microcontroller

Input / CDR Select

Remote Control

The MR-TR-3G for DWDM completes the second generation DWDM platform in the Flashlink range. The MR-TR-3G does everything the lower bit rate transponder modules do, and much more. The extremely low DWDM power consumption of the MR-TR-3G allows for up to 8 modules per 2RU frame.

MR-TR-3G supports bi-directional signals, thereby allowing for full add/drop capabilities in a DWDM ring structure. Furthermore, the support of 3G-SDI (3GHD) single link underlines how powerful this module is. MR-TR-3G for

DWDM allows for up to 40 uncompressed 3G-SDI signals on a single strand of fiber. Sensitivity figures for HD-SDI with pathological signal patterns in the range of -30dBm means up to 50% extended reach compared to first generation MR-TR modules.

Optical Input

Electrical Input

Data rate optical

19.4 to 2970Mbps

Sensitivity for 3G-SDI (2970Mbps) Better than –25dBm for HD-SDI (1485Mbps) Better than –30dBm for SDI (270Mbps) Better than –30dBm for SDH /SONET (622Mbps) Better than –30dBm for SDH /SONET (2488Mbps) Better than –25dBm for 1000BaseLX (1250Mbps) Better than –30dBm Detector overload threshold min. -5dBm Optical wavelength 1280–1620nm Transmission circuit fiber Single mode 9/125um Connector return loss >40dB w/SM fiber Detector damage threshold >0dBm Connector SC/UPC

Optical Output Transmission circuit fiber Light source Optical power Optical centre wavelength for DWDM Max number of ch. per fiber Channel spacing Max. wavelength drift Jitter (UI=Unit Interval) Connector return loss Maximum reflected power Connector

Single mode 9/125um DWDM DFB Laser 0dBm (optionally +5dBm) See page 153 40 100GHz +/- 0.16nm Max 0.2UI >40dB w/SM fiber 4% SC/UPC

GENERAL Power +5V DC / 3W, +15V DC/1.5W Control Control system for access to setup and module status with BITE (Built-In Test Equip.)

The open system platform of Network Electronics DWDM multiplexing technology allows easy interoperability with third party fiber optical systems.

Data rate NRC 19.4 to 2970 Mbps Data rate Reclocked 270, 1483.5, 1485, 2967 and 2970 Mbps Equalisation Automatic. Cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps Impedance 75 ohm Return loss >15dB, 5MHz – 1.5GHz >10dB, 1.5GHz – 3GHz Signal level nom.

800mV Connector BNC

Electrical Output Number of outputs 2 Connector BNC Impedance 75 ohm Return loss >15dB, 5MHz – 1.5GHz >10dB, 1.5GHz – 3GHz Jitter (UI=Unit Interval) Max 0.2UI Peak to peak signal level 800mV ±100mV Signal polarity 1 non inverting, 1 inverting

Standards Supported standards for electrical and optical ports: SMPTE: SMPTE 292M, SMPTE 259M-C, SMPTE 297M, SMPTE424M, SMPTE 305.2M, DVB-ASI: EN50083-9 Additional supported standards for the optical ports, only optical transponder configuration: SDH / SONET: STM1 / OC3, STM4 / OC12, STM16 / OC 48, STM16/OC48 w/FEC (2670 MBps) Gigabit Ethernet: IEEE 802.3, 1000BaseLX for SM fiber

network-electronics.com

| 141

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Optical Converters HD-EO-D15xx / HD-EO-C1xxx / HD-EO-13T/15T

HD-SDI Electrical to Optical Converter Electrical Input Optical Transmitter Optical Output

Equaliser HD-SDI Input 19.4-1485Mbps

Reclocker Distribution Amplifier 2 x HD-SDI Output

Data rate NRZ 19.4 to 1485Mbps Equalization Automatic. Cable equaliser and ­reclocker can be bypassed to ­support bitrates down to 2Mbps Impedance 75ohm Return loss >15dB @ 1485MHz Signal level nom. 800mV Connector BNC

Electrical Output Number of outputs 2 Connector BNC Impedance 75 ohm Return loss >15dB @ 1485MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity 1 non inverting, 1 inverting

• Built-in dual output Distribution Amplifier • High performance laser for the long haul • DVB-ASI compatible • SMPTE 259M/292M compliant

Standards Supported standards for electrical and optical ports: SMPTE 292M, SMPTE 259M, SMPTE 297M, SMPTE 305.2M, SMPTE 310M DVB-ASI: EN50083-9 DWDM: ITU-T G.694.1 CWDM: ITU-T G.694.2

HD-EO-13T/-15T

CWDM

DWDM

GEneral

GEneral

GEneral

Power

Power

Power Control

+5V DC / 3W Max. Control system for access to setup and module status with BITE (Built-In Test Equipment)

Optical Output Transmission circuit fiber Single mode 9/125um Light source F-P laser Optical power –7.5dBm or –3dBm @ 1310nm 0dBm @ 1550nm (DFB laser) Optical centre wavelength 1310nm or 1550nm Max. wavelength drift +/- 20nm @ temp. range 0 to +50 °C Jitter (UI=Unit Interval) 0.135 UI max. @ 270Mbps 0.2 UI max. @ 1485Mbps Connector return loss >40dB w/SM fiber Maximum reflected power 4% Connector SC/UPC acc. to SMPTE 259M

142 | network-electronics.com

Control

+5V DC / 3W Max. Control system for access to setup and module status with BITE (Built-In Test Equipment)

Optical Output Transmission circuit fiber Single mode 9/125um Light source DFB Laser Optical power 0dBm Optical centre wavelength for CWDM See page 153 Max. wavelength drift ± 6nm Jitter (UI=unit interval) 0.135 UI max. @ 270Mbps 0.2 UI max. @ 1485Mbps Connector return loss Better than 40dB typ.

Maximum reflected power 4% Connector SC/UPC acc. to SMPTE 259M

Control

+5V DC / 10W Max. 5W typically Control system for access to setup and module status with BITE (Built-In Test Equipment)

Optical Output Transmission circuit fiber Single mode 9/125um Light source DFB Laser Optical power 0dBm (optionally +5dBm) Optical centre wavelength See page 153 Max. wavelength drift ± 0.16nm Jitter (UI=unit interval) 0.135 UI max. @ 270Mbps 0.2 UI max. @ 1485Mbps Connector return loss Better than 40dB typ.

Maximum reflected power 4% Connector SC/UPC acc. to SMPTE 259M

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Optical Converters

2.1

HD-EO-2

Dual HD-SDI Electrical to Optical Converter SD/HD/ASI Input 1 19.41485Mbps

SD/HD/ASI Input 2 19.41485Mbps

Equaliser

Optical Transmitter Optical Output 1

Reclocker Bypass

Equaliser

SD/HD/ASI Output 1 19.41485Mbps

Bypass 177M/ASI

# 2x2

Optical Transmitter Optical Output 2

Reclocker Bypass

SD/HD/ASI Output 2 19.41485Mbps

Bypass 177M/ASI

Microcontroller

Remote Control

• High-density packaging in the ultra compact 2RU frame • 1310nm, 1550nm and CWDM laser available • High performance laser for the long haul • Full DVB-ASI compatibility • Built-in crossover allowing wavelength swap and emergency switching • Multiformat Re-clocking

Electrical Input Data rate NRZ 19.4 to 1485Mbps Equalization Automatic. Cable equaliser and ­reclocker can be bypassed to support bitrates down to 2Mbps.

Impedance 75 ohm Return loss >15dB @ 1485MHz Signal level nom. 800mV Connector BNC

General Power +5V DC / 3.5W Max. Control Control system for access to setup and module status with BITE (Built-In Test Equipment)

Electrical Output Number of outputs 1 per converter Connector BNC Impedance 75 ohm Return loss >15dB @ 1485MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity Non inverting

Optical Output Transmission circuit fiber Light source Optical power Optical centre wavelength Max. wavelength drift Temp. range Jitter (UI=Unit Interval) Connector return loss Maximum reflected power Connector

Single mode 9/125um F-P / DFB laser -7.5dBm @1310nm, 0dBm (DFB laser) 1310nm or 1550nm +/- 6nm 0 to +50 °C 0.135 UI max. @ 270Mbps, 0.2 UI max. @ 1485Mbps >40dB w/SM fiber 4% SC/UPC

Standards Supported standards for electrical and optical ports: SMPTE 292M, SMPTE 259M, SMPTE 297, SMPTE 305.2M, SMPTE 310M DVB-ASI: EN50083-9

network-electronics.com

| 143

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Optical Converters HD-OE / HD-OE-L

HD-OE-2 / HD-OE-L-2

HD-SDI Optical to Electrical Converter

Dual HD-SDI Optical to Electrical Converter

Distribution Amplifier

Optical receiver Optical Input

Optical receiver

2 x HD-SDI Output 19.4-1485Mbps

Optical Input 1

1 x ASI / 2 x SD / HD Output 1 19.41485Mbps

Reclocker Bypass 177M/ASI

#

Reclocker Optical receiver

Distribution Amplifier

2 x HD-SDI Output 19.4-1485Mbps

Optical Input 2

2x2

1 x ASI / 2 x SD / HD Output 2 19.41485Mbps

Reclocker Bypass 177M/ASI

Microcontroller

• High sensitivity receiver • Built-in quad/dual output Distribution Amplifier • DVB-ASI compatible • SMPTE 259M/292M compliant • Multi mode version available

Optical Input Data rate optical

• High-density packaging in the ultra compact 2RU frame • High sensitivity receiver • DVB-ASI compatible • Built-in crossover allowing wavelength swap and emergency switching • 2 Output Distribution Amplifier • Multiformat Re-clocking • Re-clocker bypass for non-video formats • Multi mode version available

Optical Input 19.4 to 1485Mbps

Data rate optical

Sensitivity HD-SDI (1485Mbps) Better than –20dBm HD-OE-L Better than –24dBm SDI (270Mbps) Better than –25dBm HD-OE-L Better than –25dBm Detector overload threshold Min. -3dBm Optical wavelength 1200–1620nm Transmission circuit fiber Single mode 9/125um Connector return loss >40dB w/SM fiber Detector damage threshold >+1dBm Connector SC/UPC

19.4 to 1485Mbps

Sensitivity HD-SDI (1485Mbps) Better than –20dBm HD-OE-L-2 Better than –23dBm SDI (270Mbps) Better than –25dBm Detector overload threshold min. -6dBm Optical wavelength 1200–1620nm Transmission circuit fiber Single mode 9/125um Connector return loss >40dB w/SM fiber Detector damage threshold >+1dBm Connector SC/UPC

General

GEneral Power +5V DC / 3W Max. Control Control system for access to setup and module status with BITE (Built-In Test Equipment)

Power +5V DC / 3.2W Max. Control Control system for access to setup and module status with BITE (Built-In Test Equipment)

Electrical Output

Electrical Output Number of outputs 4 (HD-OE-L has 2 outputs) Connector BNC Impedance 75 ohm Return loss >15dB @ 1485MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity 2 (1) non inverting, 2 (1) inverting

Number of outputs 2 per converter Connector BNC Impedance 75 ohm Return loss >15dB @ 1485MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity 1 non inverting

Standards

Standards Supported standards for electrical and optical ports: SMPTE 292M, SMPTE 259M, SMPTE 297M, SMPTE 305.2M, SMPTE 310M, DVB-ASI EN50083-9

HD-OE-L:

Optical receiver Optical Input

Remote Control

Distribution Amplifier Reclocker

144 | network-electronics.com

2 x HD-SDI Output 19.4-1485Mbps

Supported standards for electrical and optical ports: SMPTE 292M, SMPTE 259M, SMPTE 297M, SMPTE 305.2M, SMPTE 310M, DVB-ASI EN50083-9

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Optical Converters

2.1

AES-EO-13T/15T

AES-OE

AES Electrical to Optical Converter

AES Optical to Electrical Converter

Slicing & Filtering AES Input

Limiter Optical Transmitter

Optical Output

Optical Input

• Transport AES separately • 1310, 1550nm and CWDM versions • Electrical output for use in DWDM systems

Inputs Signal format AES-3 (AES/EBU) Impedance 110 ohm (transformer balanced) Connector DB25 female (Tascam pin layout)

Output Buffer

Optical Receiver

AES Output

• Transport AES separately • Multi mode or single mode • 1200-1620nm input

Output Signal format AES-3 (AES/EBU) Impedance 110 ohm (transformer balanced) Jitter < 20ns Connector DB25 female (Tascam pin layout)

GEneral Power +5V DC / 1.5W Control RS-422 with protocol for use with GYDASC System Controller Control system has access to set-up and module status with BITE (Built-In Test Equipment)

GEneral Power +5V DC / 1.4W Control RS-422 with protocol for use with GYDASC System Controller Control system has access to set-up and module status with BITE (Built-In Test Equipment)

Optical Output Transmission circuit fiber Single mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 153 Optical power for CWDM modules 0dBm Maximum reflected power 4% Connector SC/UPC, Return Loss Better than 40dB

Optical Input Sensitivity Better than –30dBm Max. input power -3dBm Optical wavelengths 1200-1620nm Transmission circuit fiber Multi mode 50/125um, Single mode 9/125um compatible Connector SC/UPC, Return Loss Better than 40dB

network-electronics.com

| 145

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Time Division Multiplexers SDI-TD-MUX-4

SDI-TD-DMUX-4

SDI Time Division Multiplexer

SDI Time Division De-multiplexer

Equaliser SDI/ASI 270Mbps

Reclocker Equaliser

SDI/ASI 270Mbps

4x4 switch

Equaliser

SMPTE 346M-2000

Optical Receiver

Optical Transmitter Optical Output

Reclocker

SDI/ASI 270Mbps

Sign. generator

TDM-DMUX

TDM-MUX

SMPTE 346M-2000

1.485 Gbps HD-SDI outputs

1.485 Gbps Optical Input

2x1 Changeover

1.485 Gbps Electrical Input

1.485 Gbps HD-SDI input

Sign. generator

Sign. generator

Electrical Output

Reclocker

4x4 switch

Sign. generator

Equaliser SDI/ASI 270Mbps

Reclocker

2x1 switch

Reclocker

SDI/ASI 270Mbps

2x1 switch

Reclocker

SDI/ASI 270Mbps

2x1 switch

Reclocker

SDI/ASI 270Mbps

2x1 switch

Reclocker

SDI/ASI 270Mbps

EDH Handling

EDH Handling

Microcontroller

Microcontroller

Remote Control

• 4 -Channel SDI/DVB-ASI time division demultiplexer • Transparent to AES audio or data signals in the ­vertical ancillary data space • Built-in routing switcher provides channel swapping capability • GYDA-SC enabled for remote control • Multi mode available

• 4 -Channel SDI/DVB-ASI time division multiplexer • Complies with SMPTE 346M-2000 standard for TDM of video, audio, data over HD • Uninterrupted signal transport by loss of any input feed at transmitter (MUX) • High performance optics for short and long haul applications with CWDM laser option

Electrical input Electrical input Number of inputs 4 independent SD-SDI or DVB-ASI Data rate 270Mbps Equalization Automatic up to 225m typ.

Impedance 75 ohm Return loss >15dB @ 270MHz Connector BNC

Optical output Output signal

HD-SDI with TDM payload acc. to SMPTE 346M-2000 Transmission circuit fiber Single mode 9/125um Light source F-P / DFB laser Optical power –7.5dBm @ 1310nm (F-P laser), 0 dBm (DFB laser) Optical centre wavelength 1310nm, 1550nm, CWDM acc. to ITU-T G.694.2 Max. wavelength drift ±20nm (F-P lasers), ±6nm (DFB lasers) Jitter (UI = Unit Interval) Max. 0.2UI @ 1485Mbps Connector return loss Better than 40dB w/ SM fiber Connector SC/UPC

Electrical output Output signal

HD-SDI with TDM payload acc. to SMPTE 346M-2000 Data rate 1485 Mbps Impedance 75 ohm Return loss >15dB @ 1485MHz Jitter (UI = Unit Interval) Max. 0.2UI Peak to peak signal level 0.8V ±0.1V Signal polarity Non-inverting Connector BNC

GENERAL Temperature range 0 to +45 °C Power consumption +5V/3.5 W, +15V/1.0W Control RS-422, GYDA-SC enabled, SNMP

Standards Supported standards for electrical and optical ports: SMPTE: SMPTE 346M-2000, SMPTE 292M, SMPTE 259M, SMPTE 305.2M, SMPTE 297M, SMPTE RP165 DVB-ASI: EN50083-9

146 | network-electronics.com

Remote Control

Output signal

HD-SDI with TDM payload according to SMPTE 346M-2000 Data rate 1485 Mbps Equalization Automatic up to 100m Impedance 75 ohm Return loss >15dB @ 270MHz Signal level Nom. 800mV Connector BNC

Optical input Input signal

HD-SDI with TDM payload according to SMPTE 346M-2000 Sensitivity Better than -25dBm Detector overload threshold Min. -6dBm Detector damage threshold > +1dBm Optical wavelength 1200–1620nm Transmission Circuit fiber Single mode 9/125um Multi mode 50/125um (option) Connector return loss Better than 40dB w/ SM fiber Connector SC/UPC

Electrical output Number of outputs 4 independent SD-SDI or DVB-ASI Data rate 270Mbps Impedance 75 ohm Return loss >15dB @ 270MHz Jitter (UI = Unit Interval) Max. 0.2UI Peak to peak signal level 0.8V ±0.1V Signal polarity Non-inverting Connector BNC

GENERAL Temperature range 0 to +45 °C Power consumption +5V/3.5 W, +15V /1.8W Control RS-422, GYDA-SC enabled, SNMP

Standards Supported standards for electrical and optical ports: SMPTE: SMPTE 346M-2000, SMPTE 292M, SMPTE 259M, SMPTE 305.2M, SMPTE 297M, SMPTE RP165 DVB-ASI: EN50083-9

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

RF over Fiber Modules

2.1

LB-EO

LB-OE

L-band Electrical to Optical Converter

L-band Optical to Electrical Converter

step attenuator

Optical Transmitter Optical Output

L-band

Optical Input 950-2150 MHz

Optical Receiver

Electrical Output 950-2150MHz LNB control

Monitor Output LNB power supply

LNB control

Microcontroller

Remote Control

Microcontroller

• Frequency range 950–2150 MHz • Remotely controlled digital gain and manual gain control with GYDA-SC system controller • Protocol transparent broadband transmission • F-type coaxial connector • High performance optics for short and long haul applications with CWDM laser option • Optical link budget up to 25dB • GYDA-SC enabled for remote control, status monitoring, error reporting and SNMP support

RF Characteristics

Monitor Output

step attenuator

Remote Control

• Frequency range 950–2150 MHz • Remotely controlled digital gain and manual gain control with GYDA-SC system controller • Protocol transparent broadband transmission • F-type coaxial connector • High performance optics for short and long haul applications with CWDM laser option • Optical link budget up to 25dB • GYDA-SC enabled for remote control, status monitoring, error reporting and SNMP support

RF Characteristics

Frequency band width 950-2150 MHz Return loss >10dB Connector F-type Gain flatness ±1.5dB over entire band

±0.25dB at any 36 MHz Maximum usable input signal < -5dBm Maximum input signal without damage

>+10dBm Inter modulation products < -55dBc with two carriers

–20dBm input signal, 5dB

Fiber loss Link gain 40dB 1dB compression (output) 0dBm Noise figure <10dB CNR >45dB with maximum input

power @ 36MHz SFDR (typically -25dBm) >109dBc/Hz

Optical Characteristics Wavelength 1310nm ± 10nm, 10 CWDM

channels ± 2nm

1290, 1310, 1330, 1350,

1470, 1490, 1510, 1530,

1550 and 1570nm Transmission circuit fiber 9/125um single mode Connector SC/PC Power output -3dBm, 0dBm, +3dBm Other general standards for compliance with all products: EMC EN 55103-1, 55103-2

Frequency band width Return loss Connector Gain flatness

Maximum output signal Inter modulation products

Link gain 1dB compression (output) NF (5dB optical loss) CNR

SFDR (typically -25dBm)

950-2150 MHz >10dB F-type ±1.5dB over entire band ±0.25dB at any 36 MHz < -5dBm < -55dBc with two carriers –20dBm input signal, 5dB Fiber loss 40dB 0dBm <15dB >45dB with maximum input power @ 36MHz >109dBc/Hz

Optical Characteristics Wavelength 1270-1610nm Transmission circuit fiber 9/125um single mode Connector SC/PC Maximum input power -6dBm Other general standards for compliance with all products: EMC EN 55103-1, 55103-2 Environmental RoHS, WEEE LNB control 22kHz compatible

GENRERAl Power

+5V DC/3W, –15V DC/1.5W, +15V DC/1.5W

GENERAL Power

+5V DC/3W, –15V DC/1.5W, +15V DC/1.5W

Environmental conditions

Environmental conditions Operation temp. range 0°C – 45°C Operation without damage temperature range

–10°C – 55°C

Operation temp. range 0°C – 45°C Operation without damage temperature range

–10°C – 55°C

network-electronics.com

| 147

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Datacom Interfaces ETH100

ETH1000

Fast Ethernet Converter

Gigabit Ethernet Media Converter Electrical Output to DWDM Module

Ethernet Switch w/1Mb Packet Buffer

2X 10/100 Mbps Twisted Pair Ethernet

Optical Transmitter Optical Output

Optical Transmitter Optical Output Physical interface ethernet

10/100/1000 Mbps Twisted Pair Ethernet

Optical Receiver Optical Input

Optical Receiver Optical Input

Microcontroller

• 1310, 1550nm and CWDM lasers • Electrical output for use in DWDM systems • Two electrical inputs • Onboard switch • Sensitivity better than –32dBm

Optical input Sensitivity Better than –32dBm Optical wavelength 1200–1620nm Transmission circuit fiber Multi mode 50/125um, Single mode 9/125um compatible Connector return loss Better than 40dB Detector damage threshold >+1dBm Max input power 0dBm Connector SC/UPC

Optical output Transmission circuit fiber Single mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 153 Optical power for CWDM modules 0dBm Connector return loss Better than 40dB typ.

Max.reflected power 4% Connector SC/UPC

Ethernet 2 x 10BaseT/100BaseTx on RJ-45 connectors, compliant with IEEE 802.3 and IEEE 802.3u, speed auto sensing, auto MDI/MDI-X. Also available with DWDM laser

General Power +5V DC/4W and –15VDC/0.1W Control Control system for access to setup and module status with BITE (Built-In Test Equipment)

148 | network-electronics.com

Remote Control

• 10BaseT/100BaseTx/1000BaseT auto sensing, compliant with IEEE 802.3 and IEEE 802.3u, auto MDI/MDI-X • 1310nm, 1550nm, CWDM lasers • Receiver sensitivity Better than -25dBm • Card edge LEDs and GYDA-SC enabled • Low power (2W) • Multi mode version available

Optical Input Sensitivity Better than –25dBm Optical wavelength 1200–1620nm Transmission circuit fiber Single mode 9/125um Connector return loss Better than 40dB Detector damage threshold >+1dBm Max input power –6dBm Connector SC/UPC

optical Output Transmission circuit fiber Single mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 153 Optical power for CWDM modules 0dBm Connector return loss Better than 40dB typ.

Max.reflected power 4% Connector SC/UPC

ethernet 10BaseT/100BaseTx/1000BaseT on RJ-45 connectors, compliant with IEEE 802.3 and IEEE 802.3u, speed auto sensing, auto MDI/MDI-X

General Power +5V DC / 2W Control Control system for access to setup and module status with BITE (Built-In Test Equipment)

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

RS-422 and GPI D-422

D-422-MG

RS-422 Data Transceiver

RS-422 Data Transceiver with GPI Multiplexer

Optical Transmitter RS422

2.1

Electrical Output to optional DWDM Module Optical Output

CODEC

RS422(1) RS422(8)

Optical Transmitter

GPO(1)

Optical Output

Multiplexer GPO(16) GPI(1)

Optical Receiver Optical Input

Electrical Output to optional DWDM Module

Optical Receiver Optical Input

GPI(16)

Occupies two slots • Bi-directional RS-422 to optical converter • Transports from DC up to 115.2kbps • Low latency • 1310nm, 1550nm and CWDM • Electrical output for use in DWDM system

Data inputs and outputs Signal format RS-422 Connector RJ-45 Bit Rate DC up to 115.2kbps Latency 400ns maximum single ­direction latency including 1m of fiber. ­Additional latency 5us/km of fiber.

• 8 x RS-422 bi-directional data streams • 16 x GPI in each direction • Very low latency • CWDM laser type is optional • Electrical output for use in DWDM system

Data inputs and outputs Signal format Connector Signal format Connector Bit Rate Latency

General Power +5V DC /2.4W Control RS-422 with protocol for use with GYDASC System Controller. Control system has accessto set-up and ­module status with BITE (Built-In Test Equipment)

Optical Input Sensitivity Better than –30dBm Max. input power –3dBm Optical wavelengths 1200-1620nm Transmission circuit fiber Multi mode 50/125um,

Single mode 9/125um compatible Connector SC/UPC, Return Loss Better than 40dB

Optical Output Transmission circuit fiber Single mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 153 Optical power for CWDM modules 0dBm Jitter (UI=unit interval) 0.135 UI max.

Connector return loss Better than 40dB typ.

Maximum reflected power 4% Connector SC/UPC

8 x RS-422 4 x RJ-45 16 x GPI / 16 x GPO DB 25 DC up to 115.2kbps 400ns maximum single ­direction latency including 1m of fiber. ­Additional latency 5us/km of fiber

GENeRAL Voltage +5V DC Control RS-422/4W with protocol for use with GYDA-SC System Controller. Control system has access to set-up and module status with BITE (Built-In Test Equipment)

Optical Input Sensitivity Better than –30dBm Max. input power -3dBm Optical wavelengths 1200-1620nm Transmission circuit fiber Multi mode 50/125um, Single mode 9/125um compatible Connector SC/UPC, Return Loss Better than 40dB

Optical Output Transmission circuit fiber Single mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 153 Optical power for CWDM modules 0dBm Jitter (UI=unit interval) 0.135 UI max.

Connector return loss Better than 40dB typ.

Maximum reflected power 4% Connector SC/UPC

network-electronics.com

| 149

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Automatic Protection Switching and Optical Distribution WOC-2-x-x

Wideband Optical Coupler Optical Optical wavelength Optical bandpass Connector return loss Directivity Transmission circuit fiber Connector

2nd and 3rd opt. window (1310nm and 1550nm) 1270-1350nm and 1510-1590nm >40dB w/SM fiber >55dB Single mode 9/125 um SC/UPC

Common Optical Fiber

Combiner / Splitter

X% of λ

Optical Fiber 1

(100 – X)% of λ

Optical Fiber 2

Split ratios and insertion loss ratios incl. connector losses: WOC-2-50-50 50%/50% 4.3dB/4.3dB WOC-2-90-10 90%/10% 1.4dB/11.7dB • Passive optical splitter module • 50/50 or 90/10 split ratio • For multiple distribution and linear tapped fiber busses • Directivity better than 55dB

GEneral Power Control

None None

WOC-4-25

1x4 Wideband Optical Coupler

Common Optical Fiber

Optical Optical passband 1260-1620nm Split ratio 25%/25%/25%/25% Insertion loss with connectors Max 9dB over passband Max 7.5dB at 1310nm +/- 20nm and 1550nm +/- 20nm Transmission circuit fiber Single mode 9/125 um Connector SC/UPC Return loss >40dB typ w/SM fiber Directivity >55dB typ

General Power Control

None None

150 | network-electronics.com

Combiner / Splitter

25% of λ

Optical Fiber 1

25% of λ

Optical Fiber 2

25% of λ

Optical Fiber 3

25% of λ

Optical Fiber 4

The WOC-4-25 is an all-optical Wideband Optical Coupler suitable for signal distribution to up to 4 sites at the same time.

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Optical switching and Wavelength Division Multiplexing

2.1

WOS-2x2

WDM-2

2x2 Wideband Optical Switch

Wavelength Division Multiplexer

Optical Fiber 1

Optical Fiber 2

Power

Power SPDT

Power

Power

Common Optical Fiber 1

1 1310nm + 1550nm

1+

2

2

Common Optical Fiber 2

• Optical redundancy switch • Contolled via GPI alarm input, RS-422 or GYDA-SC Control System • Tally output • Latching and non-latching version available

1310nm

WDM 1550nm

• Two channels per fiber • Bi-directional traffic on the same fiber • Can be used as multiplexer and de-multiplexer • High-isolation available on request

Optical

Optical

Optical wavelength Insertion loss Connector return loss Cross talk Repeatability Durability Switching time Transmission circuit fiber Connector

1290-1620nm 1.4dBtyp, max 2.1dB >40dB w/SM fiber <-80dB +/- 0.01dB 10 000 000 cycles 50ms typ.

Single mode 9/125 um SC/UPC

Optical wavelength Optical bandpass Insertion loss Isolation Directivity Transmission circuit fiber Connector Return loss Connector

2nd and 3rd opt. window (1310nm or 1550nm) 1280-1335nm and 1525-1575nm < 2dB > 17dB > 50dB Single mode 9/125 um >40dB w/SM fiber SC/UPC

GEneral

GENERAL Power +5V DC/ 1W Control Control system for access to setup and module status with BITE (Built-In Test Equipment)

2x2 Switch Main Position

Power Control

None None

Example

2x2 Switch Standby Position

Input 1

Output 1

Input 1

Output 1

Input 2

Output 2

Input 2

Output 2

Town A

Town B

Frame: FR-2RU-10-2

Frame: FR-2RU-10-2

Modules: 1 x WDM-2 1 x SDI-EO-13T OdBm 1 x SDI-EO-15T OdBm

Modules: 1 x WDM-2 2 x SDI-OE-S or 2 x SDI-OE-L

network-electronics.com

| 151

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Optical Multiplexing By using the all-optical Wavelength Division

Comparison of WDM technologies

Multiplexing (WDM) technique, simultaneous

Flashlink Dense WDM/Coarse WDM DWDM (100GHz)

CWDM

transport of multiple signals on the same

Max number of channels

16

fiber is possible. A standard 2-channel WDM solution enables transmission of two

Standard ITU-T G.694.1 ITU-T G.694.2

independent signals on the same fiber.

Channel spacing

Both uni-directional and bi-directional configurations are possible, as the direction of any channel can be chosen to suit the

40

0.8nm

20nm

Laser wavelength variation (0-40°C)

±0.16nm

±6.5nm

Optical amplification

Yes, EDFA

No

transport needs.

CWDM systems can be built with 8 channels pr frame (upgradable to 16 ch.), or with 16 channels in one frame (requires dual optical converters for SD/HD).

Systems incorporating DWDM are based on

WDM Channel Overview

the 8+1 architecture that has 8 channels per easy and cost efficient upgrade of capacity on the fiber as the demand grows. Optical multiplexers are available for systems with a wavelength count up to 40.

Fiber Attenuation

frame + 1 upgrade port, thereby enabling

SMF – Single mode fiber, ITU-T G.652 A and B LWPF – Low water peak single mode fiber, ITU-T G.652 C and D SMF

LWPF

To ensure maximum third party O-band

interoperability, the wavelengths used in both the CWDM as well as the DWDM systems are selected according to the standards

1250

1300

ITU-T G.694.1 for DWDM and

E-band 1350

1400

S-band

1450 1500 Wavelength (nm)

C-band

L-band

U-band

1550

1600

1650

ITU-T G.694.2 for CWDM. Optical multiplexing is format and protocol independent, so a mixture of different signals on the different wavelengths is

1310

straightforward. The only thing to bear in

2 ch WDM

1550

mind is that higher bit rate means a shorter maximum reach, and the optical budget should be calculated carefully.

1270

1470

1550

16 ch CWDM

1610

C-band

1530

152 | network-electronics.com

1565

40 ch DWDM

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Optical Multiplexing

2.1 Flashlink DWDM Wavelength Availability Chart acc. to ITU-T G.694.1

Channel (#)

Center frequency (THz)

Wavelength (nm)

20

192.0

1561.41

21

192.1

1560.61

22

192.2

1559.79

23

192.3

1558.98

24

192.4

1558.17

25

192.5

1557.36

26

192.6

1556.55

27

192.7

1555.75

28

192.8

1554.94

29

192.9

1554.13

30

193.0

1553.33

Wavelength Availability Chart

31

193.1

1552.52

acc. to ITU-T G.694.2

32

193.2

1551.72

33

193.3

1550.92

34

193.4

1550.12

Flashlink CWDM 1–8 and 9–16

Wavelength [nm]

Wavelength [nm]

Channel 1–8 Channel 9–16

1470

1270

35

193.5

1549.32

1490

1290

36

193.6

1548.51

1510

1310

1530

1330

37

193.7

1547.72

1550

1350

38

193.8

1546.92

1570

1370

39

193.9

1546.12

1590

1390

40

194.0

1545.32

1610

1410

41

194.1

1544.53

42

194.2

1543.73

43

194.3

1542.94

44

194.4

1542.14

45

194.5

1541.35

46

194.6

1540.56

47

194.7

1539.77

48

194.8

1538.98

49

194.9

1538.19

50

195.0

1537.40

51

195.1

1536.61

52

195.2

1535.82

53

195.3

1535.04

54

195.4

1534.25

55

195.5

1533.47

56

195.6

1532.68

57

195.7

1531.90

58

195.8

1531.12

59

195.9

1530.33

network-electronics.com

| 153

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Optical Multiplexing CWDM1–8 / CWDM9–16

CWDM System 16 independent channels

Ch.9 . . .

CWDM channel 9-16

Ch.16 Ch.1 . . .

Ch.9 . . .

CWDM channel 9-16

optical fiber

Ch.16

CWDM channel 1-8

CWDM channel 1-8

Ch.1 . . .

Ch.8

Ch.8

CWDM Also available in low-loss version (CWDM1–8L and CWDM9–16-L)

Specifications Operation temperature 0–40°C Wavelengths See page 153 Transmission circuit fiber Single mode 9/125 um Connector Return loss Better than 30dB typ.

Max. reflected power 4% Connector common port SC/UPC acc. to SMPTE-297M Connector common port (optional) FC/PC

1270

1470

1550

The CWDM system is based on 8-channel optical filters. 1 upgrade port for easy addition of more channels at a later stage. The wavelengths are chosen according to the ITU-T G.694.2 standard in order to ensure maximum interoperability.

The wavelengths of the signal cards must correspond to the wavelengths of the optical filters, whereas the signal formats running on those wavelengths can be chosen to suit the signal transport needs.

OPTICAL FILTERING, channels 1-8 and 9-16 Insertion loss any ch. (1-8)

5dB max total for both ends (low loss: 4dB) Insertion loss any ch. (9-16) 7dB max total for both ends (low loss: 6db) Insertion loss per upgrade port 2.0dB max Tx-Tx directivity -55dB Isolation adjacent ch.

-25dB Isolation any other ch.

-35dB

154 | network-electronics.com

1610

8 independent channels

16 independent channels

optical fiber

optical fiber

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Fiber Attenuation

Optical Multiplexing

2.1

SMF – Single mode fiber, ITU-T G.652 A and B LWPF – Low water peak single mode fiber, ITU-T G.652 C and D

SMF

LWPF

O-band 1250

1300

E-band 1350

1400

S-band

1450 1500 Wavelength (nm)

C-band

L-band

U-band

1550

1600

1650

DWDM-8C

8-channel DWDM filter with upgrade port 1310

2 ch WDM

1550

1270

1470

1550

16 ch CWDM

1610

C-band

1530

1565

• The only modular DWDM system in the broadcast market that allows the customer to grow to 40 DWDM channels, other system have a limit of 16 channels • Same form factor as CWDM allows for increased frame density of DWDM cards • In its category the most up to date specification on the market • Passive device • Lowered initial investment cost yet still provides the flexibility to grow in the future

40 ch DWDM

Optical specifications

Channel plan (product suffix)

Number of channels Up to 40 Available wavelengths See channel plan Connector SC/UPC Insertion loss (one matched pair, including connectors) 4.5dB max Insertion loss (common to upgrade) 0.8dB max Channel Spacing 100GHz Passband +/- 15.0GHz Adjacent Channel Isolation 25dB min Non-Adjacent Channel Isolation 40dB min Directivity 45dB min Return loss 45dB min PDL 0.25dB max Operating Temperature 0 – 55 OC Storage Temperature -40 – 85 OC Optical Power 300mW max

Ch. 20 . . .

Ch. 27

2

40 independent channels

40 independent channels DWDM 8C-1A

1

DWDM 8C-1B

optical fiber

Ch. 20 . . .

Ch. 27

optical fiber

DWDM-8C

1A

Ch. 28 . . .

Ch. 35

DWDM 8C-2A

DWDM 8C-2B

Ch. 28 . . .

Ch. 35

DWDM-8C

2A

Ch. 36 . . .

Ch. 43

Ch. 44 . . .

Ch. 51

Ch. 52 . . .

Ch. 59

DWDM 8C-3A

DWDM 8C-3B

DWDM 8C-4A

DWDM 8C-4B

optical fiber DWDM 8C-5A

40 independent

DWDM 8C-5B

Ch. 36 . . .

Ch. 43

Ch. 44 . . .

Ch. 51

Ch. 52 . . .

Ch. 59

DWDM-8C

3A

DWDM-8C

4A

DWDM-8C

5A

DWDM-8C

5B

3

DWDM-8C

4B

DWDM-8C

3B

4

Channel (#)

Center frequency (THz)

Wavelength (nm)

20

192.0

1561.41

21

192.1

1560.61

22

192.2

1559.79

23

192.3

1558.98

24

192.4

1558.17

25

192.5

1557.36

26

192.6

1556.55

27

192.7

1555.75

28

192.8

1554.94

29

192.9

1554.13

30

193.0

1553.33

31

193.1

1552.52

32

193.2

1551.72

33

193.3

1550.92

34

193.4

1550.12

35

193.5

1549.32

36

193.6

1548.51

37

193.7

1547.72

38

193.8

1546.92

39

193.9

1546.12

40

194.0

1545.32

41

194.1

1544.53

42

194.2

1543.73

43

194.3

1542.94

44

194.4

1542.14

45

194.5

1541.35

46

194.6

1540.56

47

194.7

1539.77

48

194.8

1538.98

49

194.9

1538.19

50

195.0

1537.40

51

195.1

1536.61

52

195.2

1535.82

53

195.3

1535.04

54

195.4

1534.25

55

195.5

1533.47

56

195.6

1532.68

57

195.7

1531.90

58

195.8

1531.12

59

195.9

1530.33

DWDM-8C

2B

DWDM-8C

1B

5

network-electronics.com

| 155

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 Optical Multiplexing DWDM-40C

40-channel DWDM multiplexer and de-multiplexer

E/O

Ch.1 Ch.2 Ch.3 Ch.4

Ch.1 Ch.2 Ch.3 Ch.4

Ch.5 Ch.6 Ch.7 Ch.8

Ch.5 Ch.6 Ch.7 Ch.8

Ch.9 Ch.10 Ch.11 Ch.12

Ch.9 Ch.10 Ch.11 Ch.12

Ch.13 Ch.14 Ch.15 Ch.16

Ch.13 Ch.14 Ch.15 Ch.16

Flashlink DWDM Wavelength Availability Chart acc. to ITU-T G.694.1

O/E O/E

Channel (#)

Center frequency (THz)

Wavelength (nm)

O/E

20

192.0

1561.41

21

192.1

1560.61

22

192.2

1559.79

23

192.3

1558.98

24

192.4

1558.17

25

192.5

1557.36

26

192.6

1556.55

27

192.7

1555.75

28

192.8

1554.94

29

192.9

1554.13

30

193.0

1553.33

31

193.1

1552.52

32

193.2

1551.72

33

193.3

1550.92

34

193.4

1550.12

35

193.5

1549.32

36

193.6

1548.51

37

193.7

1547.72

Dimensions 483x88x178mm (19”, 2RU) Channel spacing 100GHz within the C-band Wavelengths According to ITU-T G.694.1 Passband ITU +/- 12GHz Insertion loss paired mux/demux 6dB max Pair uniformity on pairs shipped together 1.5dB typ Adjacent ch. isolation 25dB Non-adjacent ch. isolation 40dB min Directivity 45dB min Connector SC/UPC Connector return loss Better than 40dB Polarisation Dependent Loss 0.25 dB max Max power 300mW Transmission circuit fiber Single mode 9/125 um

38

193.8

1546.92

39

193.9

1546.12

40

194.0

1545.32

41

194.1

1544.53

42

194.2

1543.73

43

194.3

1542.94

44

194.4

1542.14

45

194.5

1541.35

46

194.6

1540.56

47

194.7

1539.77

48

194.8

1538.98

49

194.9

1538.19

50

195.0

1537.40

51

195.1

1536.61

Uniform loss version for multi-stage EDFA application available on request.

52

195.2

1535.82

53

195.3

1535.04

54

195.4

1534.25

55

195.5

1533.47

56

195.6

1532.68

57

195.7

1531.90

58

195.8

1531.12

59

195.9

1530.33

E/O

Digital Signal In

E/O E/O E/O E/O E/O E/O E/O

Ch.17 Ch.18 Ch.19 Ch.20 Ch.21 Ch.22 Ch.23 Ch.24

Flashlink DWDM 40 ch.

MUX frame

40 independent channels optical fiber

Flashlink DWDM 40 ch.

DMUX frame

Ch.17 Ch.18 Ch.19 Ch.20 Ch.21 Ch.22 Ch.23 Ch.24

Ch.25 Ch.26 Ch.27 Ch.28

Ch.25 Ch.26 Ch.27 Ch.28

Ch.29 Ch.30 Ch.31 Ch.32

Ch.29 Ch.30 Ch.31 Ch.32

Ch.33 Ch.34 Ch.35 Ch.36

Ch.33 Ch.34 Ch.35 Ch.36

Ch.37 Ch.38 Ch.39 Ch.40

Ch.37 Ch.38 Ch.39 Ch.40

O/E O/E O/E

Digital Signal Out

E/O

O/E O/E O/E O/E

C-band

1530

1565

40 ch DWDM

The flagship of the optical transport platform is the 40-channel DWDMsystem, allowing for up to 40 signals on a single strand of optical fiber. Based on the standardised ITU-T G.694.1 channel spacing grid of 100GHz within the C-band, the 40-channel DWDM system has the same flexibility in signal formats and bit-rates as the 16-channel system using a channel spacing grid of 200GHz. The optical filtering is placed in a separate 2RU-frame doing all the filtering needed to multiplex or demultiplex the channels involved. The filtering is always sold as a corresponding pair of two frames, one for each end of the fiber. This is due to the fact that the filters are designed as a pair in order to optimise the optical characteristics of the filters and minimise insertion loss.

The direction of any channel can be reversed so the system allows for maximum flexibility while designing your optical networks.

Please contact your local Network Electronics’ sales representative to design the best solution for your needs.

156 | network-electronics.com

• C-band 100GHz channel spacing according to ITU-T G.694.1 – ensures interoperability with other standards-based DWDM systems • Flat spectrum – the DWDM-40C is ideal for uni-directional use with Erbium Doped Fiber Amplifiers (EDFAs) • This all-optical device fits in a standard Flashlink frame – no maintenance needed, no power needed • Signals can be uni- or bi-directional – supports digital video and Gigabit Ethernet running on different wavelengths • Signal and bit-rate transparent – SDI, HD-SDI, Gigabit Ethernet and SDH/ SONET run independently on separate wavelengths

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

EDFA

2.1 EDFA-B-C 17dBm

Erbium Doped fiber Amplifier – multichannel long-haul optical amplification • Full-band EDFA covers all 40 C-band DWDM channels (1528-1562nm) • Flat gain over whole spectrum, Ideal for multistage and full-band amplification • SDI Optimised, full broadcast performance – transports pathological SDI and HD-SDI signals without scrabling • Booster/in-line and pre-amp versions • The only modular EDFA available, Booster and pre-amp or two in-line EDFAs in the same frame • Very compact – occupies 3 slots in a Flashlink FR-2RU-10-2 frame • Very low power consumption, only 9W • Extensive parameter monitoring with Network Electronics GYDA-SC controller • Enables point-to-point transport of up to 40 uncompressed HD-SDI signals at long distances without electrical regeneration • Uni-directional device • Signal and bit-rate transparent

EDFA

Dimensions 3 Flashlink slots Input range 1529-1562nm Total optical input power -10dBm min, typ -6dBm Total optical output power +17dBm, +/- 1.5dBm Gain flatness @23dB gain 1.0dB Noise figure 6.0dB max over full band Polarisation dependent gain 0.5dB max Polarisation mode dispersion 0.5ps max Connector SC/UPC Input/output return loss Better than 35dB Power consumption +5V/9W max Transmission circuit fiber Single mode 9/125 um

EDFA

The Flashlink EDFA family introduced at NAB 2007 will enable broadcasters to maximize their investment in a DWDM infrastructure by providing multichannel, all-optical amplification. The EDFA family consists of a booster/ in-line amplifier and a low noise pre-amplifier.

The full-band EDFA boosts up to 40 DWDM-channels enabling the distance covered by fiber backhaul to be maximized and allowing broadcasters to upgrade their signal distribution from SD to HD over DWDM without needing to invest in infrastructure upgrades such as optical-to-electrical-to-optical in-line signal regeneration.

Such gains are even more impressive when EDFA technology is deployed in conjunction with the newly launching DWDM-40C. Network Electronics’ EDFA solution is extremely compact and extends the reach of the local network to remote locations, increasing functionality and lowering total cost of ownership. In addition, service providers offering traditional broadcast services over SDH/SONET can now deploy Flashlink EDFAs to increase the profitability and reach of their current infrastructure.

network-electronics.com

| 157

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 IP Gateways SDI-IP-GTW

SDI TO IP GATEWAY The world market is going through a major change the way in which video content is moved around. The new way is by using the Internet Protocol (IP) over Telco networks, a technology currently deployed on the Internet and in corporate networks.

The scalable and cost-effective IP networks offer an inherent flexibility of bandwidth: 10Mbps, 100Mbps, 1Gbps and 10 Gbps. This technology enables new applications and opportunities, for instance low delay uncompressed video on SDI using 270Mbps, MPEG-2 bandwidths of 1-50 MMbps, MPEG-4 part10 (H.264/AVC) SDI to IP Gateway The award winning IPTV gateway (SDI-IP-GTW) solution allows real time transport of uncompressed SDI digital video via IP over Wide Area Networks (WAN) where access to dark fiber or wavelengths is limited. Like other products in the Flashlink family, the SDI-IP-GTW provides uncompromising video quality with no signal degradation. An advanced forward error correction mechanism in accordance with Pro-MPEG Code-of-Practice #4 guarantees high quality of service.

Application Areas: • Professional broadcast contribution • Video backhaul solutions • Live event coverage

• SDI over Gigabit Ethernet/IP • IP protocol in accordance with Pro-MPEG CoP4 • Various Forward Error Correction modes, high QoS • Built-in frame synchronizer with advanced jitter suppression • Transparent to embedded AES audio or other ancillary data • Configurable as transmitter or receiver • Separated management Ethernet port with in-band management option • User friendly WEB/XML based remote control • Easy integration to NMS systems with SNMP support

Video Interfaces Input

SDI (SMPTE 259M) / SDTI (SMPTE 305M) Output 2 x SDI (SMPTE 259M) Connector Female BNC Bitrate 270Mbps SDI Clock Options Locked to Input Signal Genlock to external SDI input

Network Interfaces Type 100/1000Base-T Ethernet Protocols IEEE802.3 Ethernet RTP, ARP, IPv4, IGMPv2/3, TCP/UDP Connector RJ45 SFP Module

Production Facility

Features Video Encapsulation Pro-MPEG Forum COP-4 Forward Error Correction: Pro-MPEG Forum COP-4

Control and Management IP Network

Live Sports

Network Operations Center

SDI IN

SDI OUT 1

SDI OUT 2

TEST

Type 10/100 Base-T Features Element control through HTTP/WEB. SNMP traps for integration with Network Management System (NMS) Protocol HTTP, XML, SNMP v2 Connector RJ45 Alarm Relay 9 pin D-SUB Maintenance Port RS-232 9 pin D-SUB Physical and Power Input Voltage 100-240V AC +/- 10% Input Voltage Option 48V DC Dimensions 1RU, ½-width 19’’ (WxDxH) 210x300x44.5mm (Two units in 19’’ 1RU rack space) Installation 19’’ rack mounting kit supplied

IN ACTIVE LED YELLOW : SDI IN LED GREEN : ACTIVE

Environmental Conditions Operating Temperature Storage Temperature Relative Humidity

0°C - +50°C -20°C - +70°C 5% to 95% (non condensing)

Compliance CE CE marked in accordance with 93/68/EEC (22/07/03) Directive UL Designed for UL approval Safety IEC60950 and EN60950 EMC EN55022, EN55024,EN6100-3-2

158 | network-electronics.com

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

IP Gateways

2.1 ASI-IP-GTW

ASI TO IP GATEWAY The ASI-IP-GTW provides a gateway solution for the transmission of compressed digital video content over IP networks.

Being a member of the Flashlink product portfolio, the ASI-IP-GTW allows broadcast quality contribution and distribution of DVB ASI over Local Area, Metropolitan and Wide Area Networks.

ASI to IP Gateway The unit allows carrying of up to 8 DVB ASI transport streams over a Gigabit Ethernet connection. Forward error correction in accordance with Pro-MPEG Code-of-Practice 3 increases robustness against packet loss and guarantees high quality of service. The ASI-IP-GTW handles transport streams carrying MPEG-2, MPEG-4 (H.264) and VC.1 standard and high definition compressed video.

Transport Stream Interfaces Ports

Connector Bitrate

4 DVB ASI. Optional 8 DVB ASI User configurable as inputs or outputs.

License for 1,2,3,4 or 8 active ports Female BNC Max. 216Mbit/s

Network Interfaces Type 100/1000Base-T Ethernet Protocols IEEE802.3 Ethernet RTP, ARP, IPv4, IGMPv2/3, TCP/UDP Connector RJ45 SFP Module

Total Transport

Application Areas:

Stream Rate Ethernet MTU Length

• Professional broadcast distribution • Professional broadcast contribution • Live event coverage

Max. 450 Mbps Max. 1500 bytes

Stream Processing TS Encapsulation Forward Error Correction TS Processing

Pro-MPEG Forum COP-3.

Pro-MPEG Forum COP-3 Transparent

Control and Management

Venue

SD/HD Video Video Compression

Video Compression

ASI

Master Control / POP

ASI

Type 10/100 Base-T Features Element control through HTTP/WEB. XML Configuration import and export via HTTP. SNMP traps for integration with Network Management System (NMS) Protocol HTTP, XML, SNMP v2 Connector RJ45 Alarm Relay 9 pin D-SUB Maintenance Port RS232 DB9 male

GigE ASI-IP-GTW

ASI-IP-GTW FastE

ASI-IP-GTW

ASI-IP-GTW

Physical and Power Input Voltage Input Voltage Option Dimensions

Installation • DVB ASI over 100Base-T or 1000Base-T Ethernet • Transport stream encapsulation in accordance with Pro-MPEG CoP-3 • Flexible Forward Error Correction in accordance with Pro-MPEG CoP-3 • Up to 8 DVB-ASI transport streams in ½ 19” 1RU • Configurable as transmitter or receiver • Separated management Ethernet port with in-band management option • User friendly WEB/XML based remote control • Easy integration to NMS systems with SNMP support SDI IN

SDI OUT 1

SDI OUT 2

TEST

IN ACTIVE LED YELLOW : SDI IN LED GREEN : ACTIVE

100-240V AC +/- 10% 48V DC 1RU, ½-width 19’’ (WxDxH) 210 x 300 x 44.5mm (Two units in 19’’ 1RU rack space) 19’’ rack mounting kit supplied

Environmental Conditions Operating Temperature

0°C - +50°C

Storage Temperature Relative Humidity

-20°C - +70°C 5% to 95% (non condensing)

Compliance CE CE marked in accordance with 93/68/EEC (22/07/03) Directive UL Designed for UL approval Safety IEC60950 and EN60950 EMC EN55022, EN55024,EN6100-3-2

network-electronics.com

| 159

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

2.1 IP Gateways SDC-IP-GTW

SDI TO IP GATEWAY – JPEG2000 Video Interfaces Input Output

SDI (SMPTE 259M) SDI (SMPTE 259M) 2 main and 1 test outputs Connector Female BNC SDI Clock Locked to external SDI input The SDC-IP-GTW provides JPEG2000 compression of SDI signals, allowing costeffective transmission of high quality TV signals over Ethernet links.

Application Areas:

• Broadcast contribution with Ethernet connectivity • Studio-to-studio media exchange • In-house signal distribution and routing • Post-production • Live event coverage

Network Interfaces Type 100/1000Base-T Ethernet Protocols IEEE802.3 Ethernet RTP, ARP, IPv4, IGMPv2/3, TCP/UDP Connector RJ45 SFP Module (Option)

Video Encoding Video Encoding IP Encapsulation IP Bitrate Forward Error Correction

JPEG2000 MXF over RTP 5 to 100 Mbps Forward Error Correction based on ProMPEG Forum CoP-4 FEC

Resolutions EBU Tech.3267-E, 2nd edition; 625 lines, 50 fields/s SMPTE 125M-1995 525 lines, 59.94 fields/s • High quality video • JPEG2000 compression • 10 bit video • Intraframe encoding • Robust transmission of SDI signals • Flexible Forward Error Correction • Error concealment • Very low delay • Encoding and decoding delay less than 100ms • Ancillary data support • Transparent transfer of embedded audio and vertical ancillary data • Compact, cost-effective solutions • Complete transmitter / receiver in 1RU • User configurable as transmitter or receiver • User-friendly configuration and control • WEB/XML based remote control • Easy integration to NMS systems with SNMP trap support • Software upgradeable to HD

Audio and Ancillary data Audio formats Embedded audio (SMPTE 272M) Uncompressed, 16 channels, 20 bit Data formats Ancillary data (SMPTE 291M-1998) Transparent Audio/video delay +/- 1 line

Control and Management Type 10/100 Base-T Ethernet Features Element control through HTTP/WEB. XML SNMP traps for integration with Network Management System (NMS). SNMP control.

Protocol HTTP, XML, SNMP v2 Connector RJ45 Alarm Relay 9 pin D-SUB Maintenance Port RS232 9 pin D-SUB

Physical and Power Input Voltage Input Voltage Option Dimensions Installation SDI IN

SDI OUT 1

SDI OUT 2

100-240V AC +/- 10% -48V DC 1RU, ½-width 19’’ (WxDxH) 210 x 300 x 44.5mm. Two units in 19’’ 1RU rack space 19’’ rack mounting kit supplied

TEST

IN ACTIVE LED YELLOW : SDI IN LED GREEN : ACTIVE

Environmental Conditions Operating Temperature Storage Temperature Relative Humidity

0 °C – +50 °C -20 °C – +70 °C 5% to 95% (non condensing)

Compliance CE

73/23/EEC (Low voltage equipment) 89/336/EEC (Electromagnetic compatibility) CSA Designed for CSA approval Safety IEC60950 and EN60950 EMC EN55022, EN55024, EN6100-3-2

160 | network-electronics.com

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

IP Gateways

2.1 HDC-IP-GTW-C/-D

HD-SDI TO IP GATEWAY – JPEG2000 Video Interfaces Input

HD-SDI (SMPTE 292M) SD-SDI (SMPTE 259M) Output HD-SDI (SMPTE 292M) 2 main and 1 test outputs Connector Female BNC SDI Clock Locked to external SDI input (SD/HD) The HDC-IP-GTW provides a gateway solution for the transmission of JPEG 2000 compressed HD-SDI content over IP networks.

The HDC-IP-GTW is available as a encoder/decoder (codec, -C version) and as a cost effective decoder only version.

The HDC-IP-GTW is a multi rate video gateway and will auto-sense SD or HD bit rates.

Application Areas:

• Professional broadcast contribution with Ethernet connectivity • Studio-to-studio media exchange • In-house signal distribution and routing • Post-production • Live event coverage

Network Interfaces Type 100/1000Base-T Ethernet Protocols IEEE802.3 Ethernet RTP, ARP, IPv4, IGMPv2/3, TCP/UDP Connector RJ45 SFP Module (Option)

Video Encoding Video Encoding IP Encapsulation IP Bitrate Forward Error Correction

JPEG2000 MXF over RTP 25 to 200 Mbps Forward Error Correction based on ProMPEG Forum CoP-4 FEC

HD Resolutions SMPTE 274M-2003 System 5 1920 x 1080/59.94/I SMPTE 296M-2001 System 2 1280 x 720/59.94 SMPTE 274M-2003 System 6 1920 x 1080/50/I SMPTE 296M-2001 System 3 1280 x 720/50 SMPTE 274M-2003 System D 1920x1080/24/PsF

Audio and Ancillary data Audio formats Embedded audio (SMPTE 299M-1997) Uncompressed, 16 channels, 20 bit Data formats Ancillary data (SMPTE 291M-1998)

Control and Management • High quality video using JPEG2000 compression • Robust transmission of HDTV signals • Very low delay • Ancillary data support • Compact, cost-effective solutions • User-friendly configuration and control • Autosensing SD/HD • Forward Error Correction • Codec version (-C) and decoder only (-D) version

Type 10/100 Base-T Ethernet Features Element control through HTTP/WEB. XML SNMP traps for integration with Network Management System (NMS). SNMP control.

Protocol HTTP, XML, SNMP v2 Connector RJ45 Alarm Relay 9 pin D-SUB Maintenance Port RS232 9 pin D-SUB

Physical and Power Input Voltage Dimensions Installation SDI IN

SDI OUT 1

SDI OUT 2

100-240V AC +/- 10% 1RU, ½-width 19’’ (WxDxH) 210 x 300 x 44.5mm. Two units in 19’’ 1RU rack space 19’’ rack mounting kit supplied

TEST

IN ACTIVE LED YELLOW : SDI IN LED GREEN : ACTIVE

Environmental Conditions Operating Temperature Storage Temperature Relative Humidity

0 °C – +50 °C -20 °C – +70 °C 5% to 95% (non condensing)

Compliance CE

73/23/EEC (Low voltage equipment) 89/336/EEC (Electromagnetic compatibility) CSA Designed for CSA approval Safety IEC60950 and EN60950 EMC EN55022, EN55024, EN6100-3-2

network-electronics.com

| 161

FLASHLINK MICRO

2.1 Flashlink Micro Distribution Amplifiers Embedders / De-embedders Video Converters Audio Converters Synchronisation Modules Automatic Changeover Modules EO and OE Converters Datacom Interfaces

One Flashlink card + One in-line power supply + One N-Box = Flashlink Micro

Flashlink Micro, your ideal choice for desktop applications – High performance video/audio processing and fiber optics made simple Modules for desktop and stand alone applications have until now

Maximum functionality

been associated with medium-low to medium-high performance with

The comprehensive Flashlink Micro range covers a wide variety of

little or no reconfiguration possibilities. Well, those days are gone.

functions:

Interchangeable modules

• Audio and Video conversion, processing and synchronisation • Distribution amplifiers

– Initial cost savings combined with a future proof upgrade path

• Fiber conversion of SDI and HD-SDI signals

With Flashlink Micro, Network Electronics introduces the industry

• Embedding/de-embedding

standard Flashlink modules fitted in a compact and cost-effective

• Datacom Interfaces

housing for stand alone applications. As regular Flashlink modules are

• Automatic changeover modules for redundancy

used in the Flashlink Micro series it is no longer a trade off between form factor and module performance, the best of both worlds can

Low power consumption

finally be realised with Flashlink Micro.

All Flashlink Micro modules are designed with low power

Minimum setup time Flashlink Micro comes with an in-line brick power supply (redundant power optional, brick or rack-mount) so all you need is to connect

consumption in mind.

RUGGEDIZED enclosure design The combination of high reliability design philosophy and the

signal- and power cables and the self-contained box is up and

ruggedized enclosure design, means you can enjoy Flashlink Micro for

running with full broadcast quality in no time.

many years.

Monitoring and configuration

Future proof upgrade path

Control features like on board status LED’s and GPI interface as well as

Since the boards and back planes of Flashlink Micro are the same

RS-422 interface for GYDA-SC control is standard on all modules.

as in the Flashlink 2RU modular frame holding up to 10 modules,

Re-configuration of the module is easily done with DIP-switches on

the roadmap to future system expansion is crystal clear and straight

the module itself or via the GYDA-SC system controller for Flashlink.

forward. Interchangeable boards means that all modules in Flashlink

Flexible mounting

Micro automatically are compliant with relevant broadcast standards, as is the case for the Flashlink 2RU modular system.

Various mounting options are available for increased mounting flexibility:

In the next few pages you can see for yourself that Flashlink Micro

• 1RU Tray for 4 Flashlink Micro modules

meets or exceeds your expectations to modules for desktop or stand-

• Wall mounting

alone applications.

• On table mounting • Under the table mounting • Angled wall-, on-table- and under-the-table-mounting • Stacking of Flashlink Micro modules

162 | network-electronics.com

FLASHLINK MICRO

Distribution Amplifiers

2.1

FM-DA-SDI SDI Distribution Amplifier • SDI/AES-3id support • Automatic bit rate detection • On-board cable equaliser • Non-video bitrate support

In: 1 – Out: 8

More details, see page 113

FM-DA-AES

FM-DA-VA

Dual Digital Audio Distribution Amplifier

Analog Video Multisignal Distribution Amplifier

• Digital audio distribution amplifier • Configurable as Dual 1x4 or Single 1x8 • Reports signal presence • Supports sample rate from 15 to 96kHz • Supports bit rate from 16kbps to 14Mbps

• DC to 200MHz analog video • 6 non-inverting outputs • Also suitable for SDI according to SMPTE-259M

In: 1 – Out: 6 In: 1 or 2 – Out: 8 or 2x4

More details, see page 114

More details, see page 113

FM-DAC-MON

FM-DA-AA

SDI Distribution Amplifier w/Monitoring Output

Dual Analog Audio Distribution Amplifier

• 8-bit composite encoder and DA • 3 SDI and 3 composite outputs • Automatic standards detection • EDH monitoring

• Analog audio distribution amplifier • Precision gain settings for -12 to +12dB • Allows mixing of 2 inputs in dual 1x4 mode • For balanced AC signals from 3.3Hz to 400kHz

In 1 Out 3 re-clocked SDI and 3 NTSC/PAL composite

In: 2 – Out: 8

More details, see page 114

More details, see page 115

network-electronics.com

| 163

FLASHLINK MICRO

2.1 Embedders / De-embedders

Also available with 75ohm AES-3id backplane

FM-Av-MUX, FM-Av-MUX-13T

FM-AV-DMUX, FM-AV-DMUX-R

Digital Audio Embedder

Digital Audio De-embedder

• 4-channel 24-bit AES (8 mono audio) audio embedder • Automatic insertion of sample rate converters • EDH in accordance with SMPTE-RP165 • Embedding in acc. with SMPTE-272M giving maximum compatibility to 3rd party products • Transformer balanced AES in- and outputs • Allows external sampling rates from 16-144kHz w/SRC enabled • Can be used as 4-CH embedder, 4-CH de-embedder or 2-CH de-embedder/embedder • 110ohm balanced and 75ohm unbalalanced version available • Optional with optical output (AV-MUX-13T)

Also available with 75ohm AES-3id backplane

• 4-channel 24-bit AES (8 mono audio) audio de-embedder • EDH in accordance with SMPTE-RP165 • De-embedding in acc. with SMPTE-272M giving maximum compatibility to 3rd party products • Transformer balanced AES outputs • 110ohm balanced and 75ohm unbalanced version available • Optional with optical input (AV-DMUX-R)

More details, see page 117

More details, see page 117

FM-AAv-MUX, FM-AAv-MUX-13T

FM-AAV-DMUX, FM-AAV-DMUX-R

Analog Audio Embedder

Analog Audio De-embedder

• 4 channel analog audio embedder • 24 bit converters 107dB(A) typical dynamic range • Cascadable for additional audio channels • Gain adjustments with DIP switches • EDH insertion and handling • 20 or 24 bit embedding • Optional with optical output (AAV-MUX-13T)

More details, see page 120

164 | network-electronics.com

• 4 channel analog audio de-embedder • 24 bit converters 106dB(A) typical dynamic range • Cascadable for additional audio channels • Gain adjustments on DIP switches • EDH insertion and handling • Optional with optical input (AAV-DMUX-R)

More details, see page 120

FLASHLINK MICRO

Signal Processing and Synchronisation

2.1

FM-ADC-SDI

FM-DAC-AES

NTSC/PAL to SDI Decoder

Dual Audio D/A Converter

• 10-bit composite to SDI decoder • Automatic standards detection • EDH and field 1 ID insertion • 2x oversampling (27MHz) • Analog inputs w/ loop-through, 3 SDI outputs • 3-line adaptive comb filters and selectable filter settings

• 24-bit high performance AES to analog audio converter • Two independent converters on one board • Typical dynamic range of 120dBA • Transformer balanced AES inputs • Allows sampling rates from 32–96kHz

More details, see page 130

More details, see page 132

FM-ADC-SDI-CC

FM-ADC-AES

Video A/D Converter and Decoder

Dual Audio A/D Converter

• 10-bit component, composite or Y/C to SDI converter • Built-in video PROC-AMP • 3 SDI outputs

• 24-bit high performance analog audio to AES converter • Two independent converters on one board • Typical dynamic range of 117dBA

• 5 line adaptive comb filter and selectable filter settings • Automatic standards detection • EDH and field 1 ID insertion

• Transformer balanced AES outputs • Internal sampling rates 44.1, 48 and 96kHz Also available with 75ohm AES-3id backplane

More details, see page 132

More details, see page 130

FM-DAC-SDI

FM-DLY-AES

SDI to NTSC/PAL Encoder and D/A Converter

Dual AES Audio Delay

• 10-bit SDI to composite encoder and 10-bit SDI to component converter in one product • Built-in frame synchronizer w/ sub-carrier and horizontal phase adjustment • Large frame buffer (4 frames) • EDH monitoring • 4x oversampling (54 MHz) • SDI input w/ loop-through, 4 analog outputs

More details, see page 131

• 2 independent audio delay signal paths • Built-in sample rate converter accepting 32, 41.1, 48kHz • Black-burst and AES-11 reference input • Up to 10s delay at 48kHz • Simultanous fixed delay and externally switchable dynamic delay • Delay tracking input for synchronisation with DAC-SDI, FRS-SDI or other video devices • 2 AES outputs per delay line • Transformer balanced AES in- and outputs

More details, see page 133

FM-HDSDI-CHO-2x1

FM-LIS-SDI

HD Change-over

SDI Line Synchronizer

• Multi-rate change-over • Non-broadcast data rates also supported non-reclocked • Auto change-over on signal loss or reclock error • Configurable change back logic • Reports signal loss and bitrate • GPI control and alarms • Integrated DA with 4 re-clocked HD/SDI outputs

• SDI 10 bit 4:2:2 line synchronizer • Analog Black Burst genlock • EDH insertion and handling in accordance with SMPTERP165 • SDI 4:2:2 input with one active loop-through output • 3 x SDI 4:2:2 line synchronized outputs • Automatic detection of 525- and 625-line format input

More details, see page 136

More details, see page 133

FM-SDI-CHO-2x1

FM-FRS-SDI

SDI Change-over

SDI Frame Synchronizer

• SDI change-over • Non-broadcast data rates also supported non-reclocked • Auto change-over on signal loss or reclock error • Configurable change back logic • Reports signal loss and bitrate • GPI control and alarms • Integrated DA with 4 re-clocked SDI outputs • 2 inverted/2 non-inverted for DVB-ASI

More details, see page 136

• SDI 10 bit 4:2:2 frame synchronizer with embedded audio handling • Analog Black Burst genlock • Selectable freeze on last good frame or black video on error or on loss of input signal • EDH insertion and handling in accordance with SMPTERP165 • Wide delay range, from 128us up to 232ms ­(Sample, H and V adjustment) • Audio delay tracking output • SDI 4:2:2 input with one active loop-through output • 3 x SDI 4:2:2 synchronized outputs • Automatic detection of 525- and 625-line format input

More details, see page 134

network-electronics.com

| 165

FLASHLINK MICRO

2.1 Optical Converters FM-SDI-EO-13T

FM-SDI-OE-S

SDI Electrical to Optical converter

SDI Optical to Electrical converter

• 1310nm Single mode • Built-in dual output Distribution Amplifier • High performance laser for the long haul • DVB-ASI compatible • SMPTE 259M/297M compliant

• Sensitivity -20dBm • Max. input -6dBm • High sensitivity receiver • Built-in dual output Distribution Amplifier • DVB-ASI compatible • SMPTE 259M/297M compliant

More details, see page 137

More details, see page 139

FM-SDI-EO-2-13T

FM-SDI-OE-2

Dual SDI Electrical to Optical converter

Dual SDI Optical to Electrical converter

• 1310nm –7.5dBm F-P laser • High-density packaging in the ultra compact 2RU frame • High performance laser for the long haul • Full DVB-ASI compatibility • Built-in crossover allowing wavelength swap and emergency switching • Active looped SDI output

• Sensitivity -20dBm • Max. input -6dBm • High sensitivity receiver • Built-in dual output Distribution Amplifier • DVB-ASI compatible • SMPTE 259M/297M compliant

More details, see page 139

More details, see page 138

FM-HD-EO-13T

FM-HD-OE

HD-SDI Electrical to Optical converter

HD-SDI Optical to Electrical converter

• 1310nm Single mode • Built-in dual output Distribution Amplifier • High performance laser for the long haul • DVB-ASI compatible • SMPTE 259M/292M compliant

• High sensitivity receiver • Built-in quad output Distribution Amplifier • DVB-ASI compatible • SMPTE 259M/292M compliant

More details, see page 132

More details, see page 144

FM-HD-EO-2-13T

FM-HD-OE-2

Dual HD-SDI Electrical to Optical converter

Dual HD-SDI Optical to Electrical Converter

• 1310nm Single mode • –7.5dBm F-P laser • High-density packaging in the ultra compact 2RU frame • High performance laser for the long haul • Full DVB-ASI compatibility • Built-in crossover allowing wavelength swap and emergency switching • Multiformat Re-clocking

• High-density packaging in the ultra compact 2RU frame • High sensitivity receiver • Full DVB-ASI compatibility • Built-in crossover allowing wavelength swap and emergency switching • 2 Output Distribution Amplifier • Multiformat Re-clocking • Re-clocker bypass for non-video formats

More details, see page 143 More details, see page 144

166 | network-electronics.com

FLASHLINK MICRO

Datacom Interfaces

2.1

FM-ETH100-13T

FM-ETH1000-13T

Fast Ethernet Converter

Gigabit Ethernet Media Converter

• Transmitter and receiver on one card • 1310nm -7.5dBm F-P laser • Two electrical inputs • Onboard switch • Sensitivity Better than -32dBm

• Transmitter and receiver on one card • 10BaseT/100BaseTx/1000BaseT auto sensing, compliant with IEEE 802.3 and IEEE 802.3u, auto MDI/MDI-X • 1310nm -7.5dBm F-P laser • Receiver sensitivity better than -25dBm • Card edge LEDs and GYDA-SC enabled • Low power (2W)

More details, see page 148

More details, see page 148

Flashlink Micro Accessories N-BOX-CABLE

Y-CABLE

Cable

Cable

Cable for centralized powering of 4 x N-BOX, includes break-out for GYDA-SC control interface

Y-cable – combine two power supplies for redundancy

N-BOX-SH1RU

N-BOX-PL1

1RU Shelf

Mounting Plate

1RU shelf for up to 4 x N-BOX, including 3 front panels for empty slots

Mounting plate for N-BOX, allows wall, on-table, under-table mounting, complete with screw set

N-BOX-PL2

N-BOX-PL3

Angled Mounting Plates

Interconnecting Plate

Angled mounting plate for N-BOX, allows wall, on-table, under-table mounting, complete set with 2 plates and screws

Interconnecting plate for N-BOX, allows stapling of N-BOXes, complete set with 2 plates and screws

network-electronics.com

| 167

1RU COMPACT DISTRIBUTION AMPLIFIERS

2.1 Compact Distribution Amplifiers V0106DEQ

SDI0106Q

Video Equalising Distributor 1x6 Dual

Serial Digital Distributor 1x6 Quad

• Dual 1x6 Video • Differential inputs • Equalization for up to 300m cable • Gain range –1.8dB to +4dB • >25MHz Bandwidth • External DC control

Specification Frequency response Differential gain Differential phase Video S/N Ratio

0–25MHz –3dB < 0.2% < 0.2° > 70dB, 100kHz – 5MHz, unweighted Gain –1.8dB to +4dB Number of inputs 2 looped, balanced Return loss > 40dB to 10MHz Number of outputs 2x6 Impedance 75 ohm Max signal 2 Vp-p Equalization 0–300m RG59U or equiv.

Connector BNC AC power External power supply 100–260VAC (included) DC power ±5V, connector DB9 male Dimensions 483x44x45 mm (19”, 1RU)

168 | network-electronics.com

• Quadruple 1x6 SDI • D1 4:2:2 270Mbps component • D2 177Mbps PAL composite • High performance Broadcast Quality

SPECIFICATION Data rate 143Mbps–270Mbps Min. signal level 0.25 nom.0.8V Max. signal level 4.5V Number of inputs 4 looped Number of outputs 4x6 Impedance 75 ohm Signal processing none Connector BNC AC power External power supply 100–260VAC (included) DC power ±5V, connector DB9 male Dimensions 483x44x40 mm (19”, 1RU)

1RU COMPACT DISTRIBUTION AMPLIFIERS

Compact Distribution Amplifiers

2.1

AV0110

A0108DS

Analog Video Audio Distributor 1x10

Analog Stereo Audio Distributor 1x8 Dual

• 1x10 Video/Audio • 100kHz Audio Bandwidth • 80MHz Video Bandwidth • Broadcast Specification • Studio, CCTV, Duplication

AUDIO Frequency response 20Hz–100kHz ±0.1dB Crosstalk > –100dB THD+N < 0.003% SNR > 90dB ref. to 0dB 20Hz–20kHz Number of inputs 1 looped (stereo) Input impedance 47 k ohm Max. input level +22dBu Number of outputs 10 (stereo) Output impedance 66 ohm Connector RCA

VIDEO Frequency response 0-80MHz –3dB Differential gain < 0.07% (3.58/4.43MHz) Differential phase < 0.1° (3.58/4.43MHz) Video S/N Ratio > 68dB Gain 0dB, ±0.1dB Number of inputs 1 looped Number of outputs 10 Impedance 75 ohm Return loss > 40dB Max signal 2 Vp-p Coupling DC Connector BNC AC power External power supply 100–260VAC (included) DC power ±15V, connector DB9 male Dimensions 483x44x40 mm (19”, 1RU)

• Dual 1x8 Stereo • 100kHz Audio Bandwidth • Balanced inputs and outputs • Additional unbalanced inputs • Broadcast specification

SPECIFICATION Frequency response 20Hz–100kHz ±0.1dB Crosstalk > –100dB THD+N < 0.003% SNR > 90dB ref. to 0dB 20Hz–20kHz Number of inputs 4 mono (2 stereo) Input impedance > 10 k ohm Max. input level +23dBu Number of outputs 4x8 mono (2x8 stereo) Output impedance > 66 ohm Connector DB25 female Gain adjustment ± 6dB Unbalanced inputs 4 mono Input impedance 47 k ohm AC power External power supply 100–260VAC (included) DC power ±15V, connector DB9 male Power consumption 9W max Dimensions 483x44x45 mm (19”, 1RU)

network-electronics.com

| 169

1RU COMPACT DISTRIBUTION AMPLIFIERS

2.1 Compact Distribution Amplifiers V0106Q

AD0108Q

Analog Video Distributor 1x6 Quad

Quadruple Digital Audio AES/EBU Distributor

• Quadruple 1x6 Video • PAL, NTSC, HDTV, YC, SVGA, RGBS • 500MHz Video Bandwidth • High performance Broadcast Quality

SPECIFICATION Frequency response 0–500MHz –3dB Differential gain < 0.07% Differential phase < 0.22° Video S/N Ratio > 70dB Gain 0dB, ±0.1dB Number of inputs 4 looped Number of outputs 4x6 Impedance 75 ohm Return loss > 40dB Max signal 2 Vp-p Coupling DC Connector BNC AC power External power supply 100–260VAC (included) DC power ±5V, connector DB9 male Dimensions 483x44x40 mm (19”, 1RU)

170 | network-electronics.com

• Quadruple 1x8 AES/EBU distributor • AES3, AES-3id / S/PDIF input • 48kHz compatible • Low jitter spec

SPECIFICATION Signal type AES/EBU digital audio (Stereo) Balanced inputs 4x transformer coupled AES3-110 Signal amplitude 0,2 – 7Vp-p Connector DB25 female, impedance 110 ohm Unbalanced inputs 4x 75 ohm 1Vp-p unbalanced coax, SMPTE 276M Signal amplitude 100mVp-p to 1Vp-p Connector RCA, impedance 75 ohm Outputs 4x8 AES3-110 Signal amplitude 4Vp-p ± 1Vp-p Connector DB25 female, impedance 110 ohm Jitter 0.7ns Sampling rates 32 – 48kHz AC power External power supply 100–260VAC (included) DC power +5V, connector DB9 male Dimensions 483x44x45 mm (19”, 1RU)

SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION

Flashlink Accessories Single mode Patch Cords Order no. Description: SC/SPC-1 SC Patch Cord 1m SC/SPC-2 SC Patch Cord 2m SC/SPC-3 SC Patch Cord 3m

SC/UPC-FC/PC-1

SC-FC Patch Cord 1m

2.1 Other accessories Order no.

FR-Fan-1RU

Description Fan for ventilation, 1 RU DB25Pin ­Adaptor Small print-card with DB25 to screw-terminal 3m x XLRM-25pin Network DB25pin Audio Contact to 8 x XLRM (Male), 3 meter cable 3m x XLRM-15pin Network DB15pin Audio Contact to 4 x XLRM (Male), 3 meter cable DB15-DB25 Cable Interconnect cable ADC-AES to AV-MUX-xxxx DB25-DB15 Cable Interconnect cable AV-MUX-xxxx to ADC-AES

Power Supply For Flashlink Frame PWR-AC15/15/5/5V

SC/UPC-SC/APC

SC/APC Patch Cord

(8O cut angle) 1m

Other lengths or multi mode patch cords on request

PWR-DC15/15/5/5V

Power supply with 2 x 15V and 2 x 5V, 60W, input 110-260VAC auto-sensing, for spare or redundant supply Power supply with 2 x 15V and 2 x 5V, 60W, input 36-72VDC auto-sensing, for spare or redundant supply

3rd Party Interfaces

Multiple 3rd Party Interfaces may be used in conjunction with the Flashlink optical product range. These interfaces further expand the variety of signal formats that can be transported on all our platforms: PtP, WDM, CWDM and DWDM

PIGTAILS Order no.: SC/UPC Pigtail 1m SC/UPC Pigtail 2m SC/UPC Pigtail 3m

ATTENUATORS Order no.: SC-Attenuators 5dB SC-Attenuator 10dB

CleTop – fiber Cleaning Order no. Description: CleTop

For cleaning your

Fiber connections

CleTop Tape

Spare tape for CleTop

CAT5 – Cables Order no. Description: CAT-5/SerPort-1 m Cable connection

Frame to PC

network-electronics.com

| 171

VikinX Routers Since its introduction in 1996, the VikinX Compact range has dominated the marketplace through its simplicity, reliability and affordability. Today the product is one of the most deployed routing switchers in the world.

Reliability

VikinX Sublime

The range was followed by VikinX Modular, a range of

In 2006 we introduced VikinX Sublime, built to maintain and

modular routing products that has been built with reliability

extend our leadership in the market for small and medium

and affordability as the most important design criteria.

routing applications. VikinX Sublime raises the standard for reliability, affordability and flexibility in its segment.

The reliability of the router, due to fully redundant control architecture and extremely low power consumption are

The VikinX Sublime range offers the broadcast market the

the major reasons why the VikinX Modular product can be

most extensive range of matrix sizes available (8x8 to 64x64

found in the most mission critical applications.

and 128x2) and covers signal formats from analog video/

Unmatched flexibility

audio to HDTV also incorporating 1080p 3Gbps Single Link HD. In addition, VikinX Sublime provides many of the

Another reason is the unmatched flexibility of the VikinX

powerful control features that drove the VikinX Modular

Modular control system, offering control features far beyond

range to success.

other comparable routing systems.

VikinX Sublime offers flexible routing solutions for general As the only system available with full TCP/IP connectivity,

purpose facilities and on-air routing as well as mobile outside

VikinX Modular reduces the capital expenses necessary to

broadcast applications and sophisticated A/V applications.

install the system down to a minimum.

Reliability through design simplicity as well as easy to

Easy to use Network Electronicsâ&#x20AC;&#x2122; VikinX System Configurator is

operate user interfaces keep the operational expenses at a

developed to eliminate the obstacles installers and

low level, thus resulting in low cost of ownership.

operators face when setting-up and configuring complex routing solutions. One of the latest examples for easy-

When adding the 256x256 VikinX Modular in 2006, the line

to-use software is the VikinX System Configurator that

of modular routing products offers a wide range of different

accommodates wizards and convenient drag & drop menus

frame sizes and signal formats covered.

comfortably guiding the operator through the installation process. Together with Network Electronicsâ&#x20AC;&#x2122; proven routing hardware, the control system with all its control panel options and software features provides probably the most comprehensive and reliable routing switcher products in the business.

VIKINX Sublime

VikinX Sublime

Marking a new era

VikinX Sublime offers the broadcast industry the most extensive range of matrix sizes available (8x8 to 64x64 and 16x2 to 128x2) and covers signal formats from analogue video/audio to HDTV, with our SMPTE-292 HD products providing support for the 3Gbps dual link standard.

A full range of 3Gbps single link HD products is available, underscoring our commitment to providing future-proofed products wherever possible.

Flexible control solutions includes support for local and remote panels, equipped with professional broadcast quality programmable buttons.

VikinX Sublime provides many of the powerful control features that have made the VikinX Modular range a success story. Control options such as serial control RS-232,

Key features

• Analogue video/audio, AES, SD-SDI, E4, STM-1 from 8x8 to 64x64 • Multiformat HD-SDI from 8x8 to 64x64 with support for 3Gbps Dual Link HD • Single Link 3Gbps HD from 8x8 to 32x32 • Non-square matrix sizes from 16x2 to 128x2 • Re-clocking and non-reclocking SD/HD-SDI • Control via Ethernet, RS-232, Network Control Bus (NCB) • Space saving 5cm (2in) frame depth allowing front and rear rack mount • Flexible matrix partitioning • Flexible local and external control panels with professional broadcast quality buttons • Programmable button configuration • External control panels providing multipurpose GPI/GPO • Ultra-low power, high-reliability design • Dual DC power inlet • Redundant power supplies (brick or frame) with front indicators • Signal diagnostics (signal presence, re-clocking, EDH) • Seamless interoperability with VikinX Modular routers • Sync with loop-through, tri-level on HD routers • Mounting trays for brick power supply

Ethernet and Network Control Bus enable solutions from the VikinX Sublime range to fit into any application, from small production facilities up to large networks with centralized management through ETH-CON. In addition, numerous third party interface options allow the integration of VikinX Sublime at installations that employ proprietary vendor connectivity solutions.

VikinX Sublime offers flexible routing solutions for general purpose facility and on-air routing as well as mobile outside broadcast applications and sophisticated A/V applications.

network-electronics.com

| 173

VIKINX SUBLIME

2.2 Analog Video SL-V6464

64x64

Dimensions: 483x176x50 mm (19”, 4RU) Also available with X-Y Control Panel integrated in the front (SL-V6464-CP)

SL-V3232

32x32

Dimensions: 483x88x50 mm (19”, 2RU) Also available with X-Y Control Panel integrated in the front (SL-V3232-CP)

• Analog Video Router • Partitioning (for square routers only) • SL-V1602: expandable up to 64x2 • Built in Control Panel Available • Control via IP/Ethernet, RS-232, NCB • 5cm (2in) frame depth allowing front and rear rack mount • Ultra-low power high-reliability design • Redundant power supplies (brick or frame) with front indicators • Interoperability with VikinX Modular range of routers

SL-V1616

16x16

Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-V1616-CP)

Specifications Frequency response

0–125MHz –3dB

Differential gain 08x08, 16x16 32x32, 64x64

<0.1% (3.58/4.43MHz) <0.2% (3.58/4.43MHz)

Differential phase 08x08, 16x16 32x32, 64x64 Crosstalk Video S/N Ratio Bar tilt

<0.1° (3.58/4.43MHz) <0.2° (3.58/4.43MHz) < –60dB (3.58/4.43MHz) typ. 70dB, unweighted < 0.1%

Lum. non-linearity 08x08, 16x16 <0.1% 32x32, 64x64 <0.2% Impedance 75 ohm Return loss typ. 40dB @ 10MHz Max signal 2Vp-p Coupling DC DC offset <15mV Connector BNC AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male

SL-V0808

8x8

Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-V0808-CP)

SL-V1602

16x2

Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-V1602-CP)

174 | network-electronics.com

VIKINX SUBLIME

Analog Audio

2.2

SL-A6464

64x64

Dimensions: 483x176x50 mm (19”, 4RU) Also available with X-Y Control Panel integrated in the front (SL-A64643232-CP)

SL-A3232

32x32

Dimensions: 483x88x50 mm (19”, 2RU) Also available with X-Y Control Panel integrated in the front (SL-A3232-CP)

SL-A1616

16x16

Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-A1616-CP)

• Balanced stereo Analog Audio Router • Can be used for TimeCode routing • Built in Control Panel availbable • Partitioning (for square routers only) • SL-A1602: expandable up to128x2 • Control via IP/Ethernet, RS-232, NCB • 5cm (2in) frame depth allowing front and rear rack mount • Ultra-low power high-reliability design • Redundant power supplies (brick or frame) with front indicators • Interoperability with VikinX Modular range of routers

Specifications

SL-A0808

8x8

Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-A0808-CP)

Frequency response

20Hz–20kHz ± 0.1dB

Crosstalk 8x8, 32x32 64x64

<–100dBup to 20kHz <–90dB up to 20kHz (<–100dB up to 5kHz) THD+N < 0.01% @ +6dBu < 0.01% @ +22dBu Input impedance > 10 kohm CMRR > 60dB Output impedance < 66ohm Audio connector DB25 female AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male

SL-A1602

16x2

Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-A1602-CP)

network-electronics.com

| 175

VIKINX SUBLIME

2.2 SD Digital Video SL-SD6464

64x64

Dimensions: 483x176x50 mm (19”, 4RU) Also available with X-Y Control Panel integrated in the front (SL-SD6464N-CP and SL-SD6464R-CP (with re-clocking))

SL-SD3232

32x32

Dimensions: 483x88x50 mm (19”, 2RU) Also available with X-Y Control Panel integrated in the front (SL-SD3232N-CP and SL-SD3232R-CP (with re-clocking))

• Serieal Digital Video Router • Available versions with or without reclocking • Available with integrated control panel • Control via IP/Ethernet, RS-232, NCB • Partitioning (for square routers only) • SL-SD1602: expandable up to 64x2 • 5cm (2in) frame depth allowing front and rear rack mount • Ultra-low power high-reliability design • Redundant power supplies (brick or frame) with front indicators • Interoperability with VikinX Modular range of routers • DVB-ASI compatible

SL-SD1616

16x16

Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-SD1616N-CP and SL-SD1616R-CP (with re-clocking))

Specifications Data rate NRZ 143Mbps–540Mbps Reference input Comp. Video 1Vpp, 300mV sync, 75 ohm Equalization Reclocked routers(R)

Non-reclocked routers(N)

0 to 300m @ 270Mbps, typical Belden 8281 0 to 200m @ 270Mbps, typical Belden 8281 Re-clocking On R-versions only Impedance 75 ohm Return-loss in/out > 15dB (5MHz–540MHz) Signal level nom. 800mVp–p ±10% Rise/fall time typ. 700ps Connector BNC AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male

SL-SD0808

8x8

Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-SD0808N-CP and SL-SD0808R-CP (with re-clocking))

SL-SD1602

16x2

Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-SD1602R-CP)

176 | network-electronics.com

VIKINX SUBLIME

3G-HD Digital Video

2.2

SL-3GHD6464

64x64

Dimensions: 483x176x50 mm (19”, 4RU) Also available with X-Y Control Panel integrated in the front (SL-3GHD6464-CP)

SL-3GHD3232

32x32

Dimensions: 483x88x50 mm (19”, 2RU) Also available with X-Y Control Panel integrated in the front (SL-3GHD3232-CP)

SL-3GHD1616

16x16

Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-3GHD1616-CP)

• High Definition Video Router • Available with integrated control panel • Multiformat SD-SDI, HD-SDI and 3G-HD • Re-clocking on all standard video rates • Partitioning (for square routers only) • Single link 3Gbps, 1080p • Control via IP/Ethernet, RS-232, NCB • 5cm (2in) frame depth allowing front and rear rack mount • Ultra-low power high-reliability design • Redundant power supplies (brick or frame) with front indicators • Interoperability with VikinX Modular range of routers • DVB-ASI compatible

Specifications

SL-3GHD0808

8x8

Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-3GHD0808-CP)

SL-3GHD1602

16x2

Data rate NRZ Reference input

143Mbps–2,970Gbps NTSC or PAL Black Burst or HD Tri-Level acc. to SMPTE 274M, SMPTE 276M Equalization 0 to 100m @ 2,970Gbps, typical Belden 1694A Impedance 75 ohm Return-loss in/out < –15dB, 5MHz –1.5GHz < –10dB, 1.5GHz –3GHz Signal level nom. 800mVp-p ±10% Rise/fall time 20%–80% – SD limit: 0.4ns-1.5ns, <0.5ns rise/fall variation – HD limit: <270ps, <100ps rise/fall variation – 3G-HD limit: <135ps, <50ps rise/fall variation Connector BNC AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male

Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-3GHD1602-CP)

network-electronics.com

| 177

VIKINX SUBLIME

2.2 Digital Audio SL-AD6464-110

64x64

Dimensions: 483x176x50 mm (19”, 4RU) Also available with X-Y Control Panel integrated in the front (SL-AD6464-110-CP and SL-AD6464-75-CP)

SL-AD3232-110

32x32

Dimensions: 483x88x50 mm (19”, 2RU) Also available with X-Y Control Panel integrated in the front (SL-AD3232-110-CP and SL-AD3232-75-CP)

• Digital Audio Router – 110ohm • Available in ubalanced 75ohm version (BNC connectors) • Available with integrated Control Panel in front (CP version) • Set-up over IP based System Configurator • Partitioning (for square routers only) • SL-AD1602: expandable up to 128x2 • Control via IP/Ethernet, RS-232, NCB • 5cm (2in) frame depth allowing front and rear rack mount • Ultra-low power high-reliability design • Redundant power supplies (brick or frame) with front indicators • Interoperability with VikinX Modular range of routers

SL-AD1616-110

16x16

Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-AD1616-110-CP and SL-AD1616-75-CP)

Specifications Signal type AES/EBU digital audio (Stereo) Input impedance 110ohm Output impedance 110ohm Jitter < 0.025UI Signal level 0.2 – 7Vp-p Sampling rates 32 – 96kHz Switching mode Asynchronous Audio connector DB25 female AC power External power supply 100–260VAC DC power +15V, connector DB9 male

SL-AD0808-110

8x8

Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-AD0808-110-CP and SL-AD0808-75-CP)

SL-AD1602-110

16x2

Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-AD1602-110-CP and SL-AD1602-75-CP)

178 | network-electronics.com

VIKINX SUBLIME

RS-422 Data

2.2

SL-D32P

32 ports

Dimensions: 483x88x50 mm (19”, 2RU)

• Ported RS-422 data router • For flexible VTR/Device control • Ethernet/RS-232/NCB control • Configuration with IP based system configurator

Specifications Data rate 115.2 kbs Connector DB9 female AC Power External power supply 100–260VAC DC Power +5V, connector DB9 male

network-electronics.com

| 179

VIKINX SUBLIME

2.2 Sublime Accessories

SL-PWR-40

40W Power Supply for VikinX Sublime router series

SL-MT-2PSU

SL-PWR-90

1 RU tray for 2x SL-PWR-40 or 1 x SL-PWR-90, to be placed behind the VikinX Sublime router

90W Power Supply for VikinX Sublime router series

Can also be used with other sizes:

SL-MT-BP

Blindplate for 2 positions of SL-MT-6PSU

SL-MT-6PSU

1 RU mounting tray for 6x SL-PWR-40 or 3 x PWR-90

DB25Pin Adaptor

Small print-card with DB25 to screw-terminal

3mxXLRF-25PIN

Audio Breakout Cable DB25pin XLRF, 3 meter cable

180 | network-electronics.com

3mxXLRM-25PIN

Audio Breakout Cable DB25pin XLRM, 3 meter cable

VIKINX MODULAR

Redundancy

2.2

Power C

Power D

Any of 1–128

UPS

Any of x-point 1–128

Main input source

Output On-Air

Main signal source redundant

Any of 129–256

Any of x-point 129–256 Automatic change-over

SYSCON

SYSCON

Power B

Power A UPS

A dead power supply can break down your whole router system. A

To be able to fulfill the market requirements for mission critical

damaged Ethernet Switch can create incorrect or no communication

applications, Network Electronics includes redundancy in all our

at all in your system. The signal path could be broken, leaving you

products and solutions. You will find redundancy in the product itself,

with no video output.

the internal and external wiring, in 3rd party SNMP applications or redundancy by smart system design.

Redundancy has always been a top priority in broadcast. On-Air 24/7/365 – this is the requirement. When designing products and

Bear in mind Network Electronics’ vision of manufacturing low

solutions for the broadcast industry, redundancy is a priority for

power, compact and new technology products, software and

Network Electronics. Technical error or interruptions in the program

SNMP applications are used as enablers for redundancy. Software

signal path are important to prevent.

applications can keep overview of system condition, report abnormalities and take ACTION. Instead of bringing more hardware

Redundancy is discussed in many areas of a broadcast installation,

onboard, clever engineering and new technologies enable Network

from redundant power systems, redundant system control, redundant

Electronics to continue providing compact products with redundant

signal path and more complex monitoring applications with SNMP

designs at an affordable price.

support.

network-electronics.com

| 181

VIKINX MODULAR

2.2 Modular Frames Widest range of signal formats

VikinX Modular range of control panels provides one of the most

Network Electronics’ VikinX family of modular routers accommodates

sophisticated router control systems available.

the widest range of signal formats, including HD-SDI, SD-SDI, analog audio, AES/EBU audio and telecom. Most of these signals can all be

All routers can be controlled remotely through PCs, other

mixed in the same frame.

manufacturers control equipment or Network’s own THOR Windowsbased software.

Independent of signal format, all components are front loaded and hot-swappable. VikinX Modular allows configurations up to 256 x

New features are continuously added to make the use of the system

256 with increments of 32 x 32.

even more simple and comfortable.

Bridge Line Concept

The steadily growing number of third party interfaces allows

With the 256x256 VikinX Modular router Network Electronics

installation of VikinX Modular routers in existing third party systems.

introduces the Bridge Line Concept providing a 16 signal wide bus,

Those systems can also be controlled from a VikinX Modular control

allowing to route any signal in the router through Flashlink signal

system including the THOR Windows software in order to obtain

processing and fiberoptic devices that can be placed in dedicated

all advantages provided by the Network Electronics router control

slots in the router.

system.

Bridge-lines make it possible to internally switch line or frame-

No compromise

synchronizers, A/D and D/A converters or fiberoptical interfaces

Heat and high power consumption are the enemies of any

into the signal path, thus enabling signal error suppression, domain

electrical device. Network Electronics’ routers have ultra low power

conversion, fiberoptical conversion and trunking.

consumption and air flow to provide best possible whorking

TCP/IP Interconnectivity All VikinX Modular devices provide TCP/IP interconnectivity, an ideal

conditions to a central router, securing reliability and maximum running time.

way of operating a routing system from remote sites, independent of

Frame sizes

whether those are within a campus or on another continent.

The VikinX Modular series comes in three frames sizes.

Vikinx System Configurator

The 5RU series (S) is for routers where space is at a premium and a

Each control panel has its own database containing configuration files

maximum of 64x64 cross points is needed.

for the Software Configurable Keys. New configurations can easily be made using the VikinX System Configurator software tool.

Everything is the same for the 9RU (M) series except it has space for up to 128x128 cross points.

With the Expandable Panel Concept, allowing grouping of several panels into one logical control unit and the Customised Surface

The 21RU (L) series still uses the same building blocks and provides

Design, giving unlimited possibilities in designing user surfaces, the

256x256 cross points.

A simple, elegant router design • High Reliability • Easy Upgrades • Easy Maintenance

Physical Dimensions 483x400x340 mm (19”, 9RU)

Physical Dimensions 483x924x340 mm (19”, 21RU)

Physical Dimensions 483x220x340 mm (19”, 5RU)

182 | network-electronics.com

VIKINX MODULAR

Modular Frames Single Board Matrix Design – 32x32 matrix modules

2.2 Single Board Matrix Design – 32x32 matrix modules

2 x SYSCON 2 x Power Supplies 2 x SYSCON 2 x GYDA-VX

2 x Power Supplies

The Simple, Elegant Design • High reliability • Low power consumption • Load sharing power supplies running at very low level • Minimum number of circuit modules • Minimum number of module interconnections • Redundant Fans with plenty of air-space and low noise

Easy Serviceability • No active components on rear panel • All front loading, hot swappable modules • Minimal # of spares to stock • Easy upgrade to larger matrix sizes A Control System Architecture for today’s needs

Features

• 2 Power Supplies (4x in L) – Redundant and load sharing (single PSU (2x in L) included in the router price) • 2 System Controllers SYSCON – System controller for all VikinX modular routing switchers (single SYSCON included in the router price) – Redundant and Dual Level Control with different protocols – Crosspoint Configuration on flash card – Dual Sync Inputs – Simultaneous switching of entire matrix • Built-in monitoring matrix with 1 output per 32x32 block • Internal Bridge Lines for advanced processing and fiber (256x256 only) • SD-SDI, HD-SDI and AES digital audio routing in one frame • Mixed 525/625 operation • Tri-Level Sync • Independent Ethernet and serial ports – Fully Redundant Internal Control Architecture • 2 Status, monitoring, alarming modules GYDA-VX – Optional router control module – Signal diagnostics – Redundant SNMP and Web-based interaction

A router with the complete set of features • Meets all relevant SMPTE specifications • Includes SNMP, Web tools • High level of Redundancy

Simple and familiar interconnect • Works very well for small systems • Works very well for larger arrangements – grow with facility • Supports remote sites extremely well

Control Interfaces Serial ports: 2x RS-232/422/485 with standard SYSCON 2x RS-232/422/485 with redundant SYSCON Connector DB9 female Ethernet ports: 1x 10/100Base-T with standard SYSCON 1x 10/100Base-T with redundant SYSCON 1x 10/100Base-T with standard GYDA-VX 1x 10/100Base-T with redundant GYDA-VX Connector RJ45

Power Supplies AC Range 90-130VAC / 180-254VAC

switchable, 50-60Hz, 300W Connector IEC 320, separate input for

each power supply DC Range 36-72VDC, 300W Connector Screw terminal Alarm Power Alarm Relay contact closure Connector RJ45 Cooling Type Internal forced air

network-electronics.com

| 183

VIKINX MODULAR

2.2 SD Digital Video VD256256L

Serial Digital Video Routers

Electrical Signal Inputs Standard Data Rate Connector Impedance Return Loss Cable Equalization

SMPTE 259M 19.4Mbps – 540Mbps 75 ohm BNC female 75 ohm nominal > 15dB (5-540MHz) 0 to 300m typical Belden 8281

Electrical Signal Outputs Connector Signal Level Signal Polarity Impedance Return Loss

75 ohm BNC female 800mVp-p ±10% Non-inverting with respect to inputs 75 ohm nominal > 15dB (5-540MHz)

Reference Inputs Number of Inputs

2 standard, both reference signals supplied to both SYSCON when used in redundant mode Connectors 75 ohm BNC female, loop-thru Return Loss > 40dB (100kHz – 5MHz), >35dB (5-10MHz) Signal Format NTSC or PAL Black Burst or HD Tri-Level acc. to SMPTE 274M, SMPTE 276M Signal Level Nominal 1.0Vp-p Field Selectivity Odd / Random field selectable Timing Range Adjustable in 1 line steps

Alarm Interfaces Card Edge LEDs, RS-232/422/485 with open protocol, SNMP Agent and WEB interface with GYDA-VX. Information regarding performance of incoming signal, EDH on each signal path can be presented on one common surveillance and monitoring output.

Physical Dimensions 483x924x340 mm (19”, 21RU)

184 | network-electronics.com

VIKINX MODULAR

HD Digital Video

2.2 HD256256L

High Definition Digital Video Routers

Electrical Signal Inputs Standard Data Rate Connector Impedance Return Loss Cable Equalization

SMPTE 292M 19.4Mbps – 1485Mbps 75 ohm BNC female 75 ohm nominal > 15dB (5MHz-1.5GHz) 0 to 100m typical Belden 1694A

Electrical Signal Outputs Connector Signal Level Signal Polarity Impedance Return Loss

75 ohm BNC female 800mVp-p ±10% Non-inverting with respect to inputs 75 ohm nominal > 15dB (5MHz-1.5GHz)

Reference Inputs Number of Inputs

2 standard, both reference signals ­supplied to both SYSCON when used in redundant mode Connectors 75 ohm BNC female, loop-thru Return Loss > 40dB (100kHz – 5MHz),

>35dB (5-10MHz) Signal Format NTSC or PAL Black Burst or HD Tri-Level acc. to SMPTE 274M, SMPTE 276M Signal Level Nominal 1.0Vp-p Field selectivity Odd / Random field selectable Timing Range Adjustable in 1 line steps

Alarm Interfaces Card Edge LEDs, RS-232/422/485 with open protocol, SNMP Agent and WEB interface with GYDA-VX. Information regarding performance of incoming signal, EDH on each signal path can be presented on one common surveillance and monitoring output.

Physical Dimensions 483x924x340 mm (19”, 21RU)

network-electronics.com

| 185

VIKINX MODULAR

2.2 SD Digital Video VD128128M / VD6464S

Serial Digital Video Routers

Electrical Signal Inputs

VD128128M

Standard Data Rate Connector Impedance Return Loss Cable Equalization

SMPTE 259M 19.4Mbps – 540Mbps 75 ohm BNC female 75 ohm nominal > 15dB (5-540MHz) 0 to 300m typical Belden 8281

Electrical Signal Outputs Connector Signal Level Signal Polarity Impedance Return Loss

75 ohm BNC female 800mVp-p ±10% Non-inverting with respect to inputs 75 ohm nominal > 15dB (5-540MHz)

Reference Inputs Number of Inputs

2 standard, both reference signals supplied to both SYSCON128 when used in redundant mode Connectors 75 ohm BNC female, loop-thru Return Loss > 40dB (100kHz – 5MHz), >35dB (5-10MHz) Signal Format NTSC or PAL Black Burst or HD Tri-Level acc. to SMPTE 274M, SMPTE 276M Signal Level Nominal 1.0Vp-p Field Selectivity Odd / Random field selectable Timing Range Adjustable in 1 line steps

Alarm Interfaces Card Edge LEDs, RS-232/422/485 with open protocol, SNMP Agent and WEB interface with GYDA-VX. Information regarding performance of incoming signal, EDH on each signal path can be presented on one common surveillance and monitoring output.

VD6464S

186 | network-electronics.com

VIKINX MODULAR

HD Digital Video

2.2 HD128128M / HD6464S

High Definition Digital Video Routers

Electrical Signal Inputs

HD128128M

Standard Data Rate Connector Impedance Return Loss Cable Equalization

SMPTE 292M 19.4Mbps – 1485Mbps 75 ohm BNC female 75 ohm nominal > 15dB (5MHz-1.5GHz) 0 to 100m typical Belden 1694A

Electrical Signal Outputs Connector Signal Level Signal Polarity Impedance Return Loss

75 ohm BNC female 800mVp-p ±10% Non-inverting with respect to inputs 75 ohm nominal > 15dB (5MHz-1.5GHz)

Reference Inputs Number of Inputs

2 standard, both reference signals ­supplied to both SYSCON-SM when used in redundant mode Connectors 75 ohm BNC female, loop-thru Return Loss > 40dB (100kHz – 5MHz),

>35dB (5-10MHz) Signal Format NTSC or PAL Black Burst or HD Tri-Level acc. to SMPTE 274M, SMPTE 276M Signal Level Nominal 1.0Vp-p Field selectivity Odd / Random field selectable Timing Range Adjustable in 1 line steps

Alarm Interfaces Card Edge LEDs, RS-232/422/485 with open protocol, SNMP Agent and WEB interface with GYDA-VX. Information regarding performance of incoming signal, EDH on each signal path can be presented on one common surveillance and monitoring output.

HD6464S

network-electronics.com

| 187

VIKINX MODULAR

2.2 Analog Audio A128128M / A6464S

Analog Stereo Audio Routers

A128128M Electrical Signal Inputs Type Balanced Connector DB25 female Impedance > 10 kohm CMRR > 60dB Max. level +23dBu

Electrical Signal Outputs Type Balanced Connector DB25 female Impedance < 66 ohm CMRR > 40dB Max. level +23dBu Gain adj.

1.0dB (compensation for 600 ohm load)

Performance Frequency response Adjacent crosstalk SNR THD+N Click noise

20Hz – 125kHz (-3dB), 20Hz – 20kHz ±0.1dB > 100dB, 20Hz – 20kHz < -90dBu(A) < 0.01% at 6dBu < -50dBu

Alarm Interfaces Card Edge LEDs, RS-232/422/485 with open protocol, SNMP Agent and WEB interface with GYDA-VX

A6464S

188 | network-electronics.com

VIKINX MODULAR

Digital Audio + Telecom

2.2

AD128128M / AD6464M

Digital Audio, AES/EBU Routers

Electrical Signal Inputs Type Connector Impedance Signal level

Reference Inputs

Transformer balanced DB25 female 110 ohm > 0.2 – 7Vpp

Electrical Signal Outputs Type Connector Impedance

Transformer balanced DB25 female 110 ohm

Performance Sampling rates 32–96kHz Switching mode Asynchronous Jitter Typical 800ps

Number of Inputs

2 standard, both reference signals ­supplied to both SYSCON-128 when used in redundant mode Connectors 75 ohm BNC female, loop-thru Return Loss > 40dB (100kHz – 5MHz), >35dB (5-10MHz) Signal Format NTSC or PAL Black Burst or HD Tri-Level acc. to SMPTE 274M, SMPTE 276M Signal Level Nominal 1.0Vp-p Field selectivity Odd / Random field selectable Timing Range Adjustable in 1 line steps

Alarm Interfaces Card Edge LEDs, RS-232/422/485 with open protocol, SNMP Agent and WEB interface with GYDA-VX.

T128128-140/155M / T6464-140/155S

140/155Mbps Telecom Routers

Electrical Signal Inputs Standard ITU G.703 CMI Data Rate 140Mbps / 155Mbps Connector 75 ohm BNC female Impedance 75 ohm nominal Return Loss > 15dB (5-540MHz) Cable Equalization 0 to 300m typical Belden 8281

Electrical Signal Outputs Connector Signal Level Signal Polarity Impedance Return Loss

75 ohm BNC female 1000mVp-p ±10% Non-inverting with respect to inputs 75 ohm nominal > 15dB (5-540MHz)

Reference Inputs Number of Inputs

Connectors Return Loss Signal Format

Signal Level

2 standard, both reference signals ­supplied to both SYSCON-128 when used in redundant mode 75 ohm BNC female, loop-thru > 40dB (100kHz – 5MHz), >35dB (5-10MHz) NTSC or PAL Black Burst or HD Tri-Level acc. to SMPTE 274M, SMPTE 276M Nominal 1.0Vp-p

Alarm Interfaces Card Edge LEDs, RS-232/422/485 with open protocol, SNMP Agent and WEB interface with GYDA-VX.

network-electronics.com

| 189

VIKINX CONFIGURATION, CONTROL AND MONITORING

2.2 VikinX Configuration, Control and Monitoring

Along with the broad range of VikinX routing switchers, Network

database in an easy removable Compact Flash card. SYSCON

Electronics provides numerous possibilities to either direct or

provides both serial and Ethernet/IP interfaces. The IP connectivity

remote control of all switching devices. From simple single bus and

allows operating a routing system from remote sites, independent

X-Y control panels for smaller applications to advanced IP control

of whether those are within a campus or on another continent. Our

panels, SNMP control and web client for highly flexible large router

intelligent IP control panels automatically obtain the IP address of the

applications, there is always a control set-up that fits the needs of

redundant SYSCON in case there is an error on the main controller.

your application.

System Configurator Software

SNMP control With the GYDA-VX monitoring and control device we are offering

New panel configurations can easily be made using the VikinX System

signal diagnostics on a user friendly web interface as well as

Configurator software tool, developed to eliminate the obstacles

SNMP control, allowing our routers to be controlled by a Network

installers and operators face when setting-up and configuring

Management System.

complex routing solutions. The VikinX System Configurator accommodates wizards and convenient drag & drop menus

Intelligent CONTROL panels

comfortably guiding the operator through the installation process.

Intelligent control panels accommodate features and user interface

Router Controller

flexibility that typically require a huge selection of different products.

With the VikinX panels you can create an unlimited number of

With the VikinX Modular router controller SYSCON we have taken

different user interfaces exactly fitting your operational requirements.

system security onto new heights. Through our fully redundant

Each control panel has Software Configurable Keys allowing simple

control architecture, from the independent control ports on the

operation like Single Bus or X-Y, but also complex Multi-Level /

router to the crosspoint switch controller, we can offer the highest

Multi-Crosspoint operations. The Expandable Panel Concept allows

reliability possible in a routing system. The SYSCON control

grouping of several panels into one logical control unit. Customised

system completely avoids single points of failure, like changeovers,

Surface Design is giving unlimited freedom in designing button lay-

centralized main controllers or similar. SYSCON retains the system

outs.

Web Panel Web Panel was developed to simplify the use of routers in a computer-based environment. Network Electronics’ System Configurator contains a given number of web panel templates available to the user, fully configurable with all the features offered in the company’s VikinX IP based hardware control panels. Web Panel works with browsers like Firefox, Safari, and Opera and provides a control interface compatible with Windows, Mac and Linux.

Web Panel features: • Web Panel server features include: – Install to a single Windows web server – Activity log – Client log-in via standard web browser – IP verification for IT security • Web Panel client features include: – Platform independent, router control from PC, MAC or Linux – Web panel templates, software configurable keys – Router access according to user rights – No software installation required on client computer – Advanced router control features

190 | network-electronics.com

VIKINX CONFIGURATION, CONTROL AND MONITORING

Direct and remote control

2.2

Numerous possibilities for both direct and remote control of all components â&#x20AC;Ś through the use of panels, PCs, SYSCON, GYDA, other manufacturers control equipment and THOR

Site 3

Video L1

Site 2

Video L1

CP MDP

Video L2

Video L2 2 x CP 16 LCD

2 x CP 16 LCD

2 x CP 44 MEC

2 x CP 44 MEC

Video L3

Video L3 CP 44 MEC and CP 16 LCD

CP 44 MEC and CP 16 LCD

CP 16 LCD

CP 16 LCD

CP 44 MEC

CP 44 MEC

THOR

Additional Control

Internet

Site 1 CP MDP

THOR

VikinX Compact routers and control panels

Network Control Bus (NCB)

Router Management System VikinX System Configurator Ethernet

THOR

RS232

ETH-CON

VikinX Sublime routers

VikinX Sublime control panels

3rd party control and router systems

For direct control of the VikinX compact routers, Network Electronics

GYDA-VX gives the modular routing line a comprehensive alarming/

has developed a flexible and expandable range of compact panels.

surveillance and SNMP control. GYDA-VX is available both as single

For the VikinX modular routers, Network Electronics offers a range of

controller and dual redundant controller.

IP-based control panels that allows the use of standard Ethernet LAN. To further allow for flexibility, the ETH-CON enables compact routers

The THOR router management system is a Windows-based router

and control panels to interconnect with the modular control system.

control system for the VikinX compact and modular router series.

Thus the modular control panels can be used to control compact

THOR offers a wide and modular range of features that provides

routers and the advanced features of the modular control system are

complete control and multiple configuration options.

made available for compact routers. The SYSCON cards contain the configuration database for the modular routers and optionally for the panels on an easily replaced Compact Flash card.

network-electronics.com

| 191

VIKINX CONFIGURATION, CONTROL AND MONITORING

2.2 Control and Monitoring SYSCON-256 / SYSCON-128 / SYSCON-64

GYDA-VX

SYSCON

GYDA

System

System

CPU

400MHz Intel PXA255 StrongARM

Memory Compact Flash

Electrical Interfaces 2 x RS-232 or RS-422 control ports on DB9F conforming to IBM PC (RS-232) or SMTPE207M (RS-422) 1 x 10BaseT/100Base-TX fast ethernet, full duplex capable

Power Consumption

CPU

400MHz Intel PXA255 StrongARM

Memory Compact Flash

Electrical Interfaces 1 x 10BaseT/100Base-TX fast ethernet, full duplex capable

Power Consumption +5V, typ. 400 mA. Maximum 3W

+5V, typ. 400 mA. Maximum 3W

GYDA-VX

192 | network-electronics.com

• WEB interface tool for router monitoring and control, SNMP Agent.

• WEB interface HTTP ver. 1.1, HTML ver. 4.01, compatible with all major browsers, SNMP ver. 3.0, User Based Security Model • Monitoring and control features available on both user interfaces • Signal presence detection on inputs • Reading Re-clocker lock and lock rate 143,177,270,360,540, 1485/1483.5 on all outputs • SYSCON Error • EDH Monitoring • Possibility for separated Ethernet connections for monitoring and control

VIKINX CONFIGURATION, CONTROL AND MONITORING

Ethernet Connections

2.2

Eth-CON

ETH-CON

Ethernet connectivity for VikinX Compact and Sublime routers.

Control, configure or monitor your infrastructure from anywhere

VikinX Compact routers and control panels

Network Control Bus (NCB)

Router Management System VikinX System Configurator Ethernet

THOR

RS232

ETH-CON

VikinX Sublime routers

VikinX Sublime control panels

3rd party control and router systems

network-electronics.com

| 193

VIKINX CONFIGURATION, CONTROL AND MONITORING

2.2 Modular Control Panels Expandable Panel Concept

2 x CP 16 LCD interconnected via the EPC bus will logically appear as one panel on the VikinX modular control bus.

CP 16 LCD and CP 44 MEC interconnected via the EPC bus will logically appear as one panel on the VikinX modular control bus.

2 x CP 44 MEC interconnected via the EPC bus will logically appear as one panel on the VikinX modular control bus.

Customised Surface Design All buttons in use…

Extra overlay ready for customising comes with every IP-based Control Panel. The overlay has half stamped holes for the buttons, making it easy to customise.

SCK – Software Configurable Keys EPC – Expandable Panel Concept CSD – Customised Surface Design Example of customised panel

CSD (Customised Surface Design) gives you a greater freedom in designing your specific user surface. With CSD you can remove keys that you find unnecessary, create functional blocks, as you need them and still get a professional looking panel.

194 | network-electronics.com

VIKINX CONFIGURATION, CONTROL AND MONITORING

Modular Control Panels

2.2

CP-44-MEC

CP-16LCD

44 Software Configurable Buttons

16 Software Configurable LCD-Buttons

• 44 Software configurable mechanical buttons

Control Interfaces

• 16 software configurable LCD buttons with 36x24 pixels

Control Interfaces

Ethernet ports 1x 10/100Base-T Connector RJ45

Ethernet ports 1x 10/100Base-T Connector RJ45

Power Supplies

Power Supplies

AC Range 90-254VAC, 50-60Hz, 10W Connector IEC 320 DC Range 36-72VDC, 10W Unit Power Voltage +5V DC Connector DB9 male

AC Range 90-254VAC, 50-60Hz, 10W Connector IEC 320 DC Range 36-72VDC, 10W Unit Power Voltage +5V DC Connector DB9 male

Physical Dimensions

Physical Dimensions

483x44x45 mm (19”, 1RU)

483x44x45 mm (19”, 1RU)

For all VikinX Modular Control Panels: • Tri-color button illumination • Ethernet panel bus • Expandable Panel Concept (EPC) RS-232 port • 16 GPI ports / 16 GPO ports

network-electronics.com

| 195

VIKINX CONFIGURATION, CONTROL AND MONITORING

2.2 Modular Control Panels CP-MDP-CL

CP-MDP-BW

Master Display Panel

Master Display Panel

• 64 software configurable buttons • Easy exchangeable labelling • 320x240 QVGA color display • Customised Surface Design (CSD) option • Video preview (optional)

• 64 software configurable buttons • Easy exchangeable labelling • 320x240 QVGA b/w display • Customised Surface Design (CSD) option • Video preview (optional)

Control Interfaces

Control Interfaces

Control Interfaces Ethernet ports 1x 10/100Base-T Connector RJ45

Control Interfaces Ethernet ports 1x 10/100Base-T Connector RJ45

Power Supplies

Power Supplies

AC Range 90-254VAC, 50-60Hz, 10W Connector IEC 320 DC Range 36-72VDC, 10W Unit Power Voltage +5V DC Connector DB9 male

AC Range 90-254VAC, 50-60Hz, 10W Connector IEC 320 DC Range 36-72VDC, 10W Unit Power Voltage +5V DC Connector DB9 male

Physical Dimensions

Physical Dimensions

483x44x45 mm (19”, 2RU)

483x44x45 mm (19”, 2RU)

Video Preview on Control Panel CP-MDP The Master Display Panel (CP-MDP) includes a high resolution QVGA

Typical use for this application is preview before “Take”.

display screen where live video can be presented. “Signal presence”,

To enable video streaming to the MDP Panel, an external Video

or confirmation of video content, can be presented with a frequency

Server is required. The Network Electronics certified video server is a

of 7 pics per second.

Moxa VPort 2110.

Note: The video series is NOT provided by Network Electronics.

Master Display Panel (CP-MDP) Ethernet

Ethernet Control and preview

Ethernet Preview 7 pics per second Optional DA converter

With preview

Analogue video

Video Server (Moxa VPort 2110)

196 | network-electronics.com

VIKINX CONFIGURATION, CONTROL AND MONITORING

Sublime Control Panels Multibus X-Y Control Panel

2.2 Dualbus Control Panel

For router size: 16x2

Panel 1RU 2RU

Router 16x16, 8x8 32x32

4RU

64x64

Singlebus Control Panel All VikinX Sublime Control Panels: • Ethernet/RS-232/NCB control • Programmable • Size: 19inch – 1RU, 2RU or 4RU – depth 5cm

Optional GPI

Panel 1RU 2RU

Router 32x32, 16x16, 8x8 64x64

network-electronics.com

| 197

VIKINX CONFIGURATION, CONTROL AND MONITORING

2.2 Compact Control Panels Singlebus Control Panels

Multibus X-Y Control Panels

Sizes offered: 32 and 64 • A/V Breakaway function • Audio follow video funtion • Legendable buttons • Panel enable function • Take function

Sizes offered: 32x32 and 64x64 • A/V Breakaway function • Audio follow video funtion • Legendable buttons • Panel enable function • Take function

GPI/Tally/Joystick Control Panels

Universal, Multilevel Control Panels

Sizes offered: 32x32 and 64x64 • GPI or joystick operation • GPI-CP with single bus panel • Comprehensive user options • Tally output

• 2x16 character alphanumeric display • 8 level A/V breakaway control • Panel enable fundtion

Control System • Up to 50 Routers and Control Panels per system • Network Control Bus in all Routers and CPs • RS-232 port in all Routers and CPs • De-centralized control architecture • Local, independant sub-systems • PC/IP/Remote access possibilities over RS-232/Ethernet (via ETH-CON) • Open protocol; you may write your own software

VikinX Compact Control Panels, Reference Guide Router \ CP

Singlebus Multibus (X-Y)

CP-UNI GPI / Tally

Joystick (w/CP)

VikinX.32

(1RU) Remote

(2RU) Remote

(1RU) Remote

(2RU) Remote

VikinX.64

(2RU) Remote

(4RU) Remote

(1RU) Remote

(4RU) Remote

CAV8 / CAV16

(1RU) Remote Remote / Local

(1RU) Remote

(1RU) Remote

198 | network-electronics.com

VIKINX CONFIGURATION, CONTROL AND MONITORING

VikinX System Configurator Powerful features The VikinX System Configurator features include: • Unified configuration tool for VikinX Modular,VikinX Sublime, ETH-CON & GYDA

2.2

Full TCP/IP interconnectivity VikinX is the only system available with full TCP/IP interconnectivity.

The VikinX router range minimises initial investment cost, and operating expenses, resulting in very low cost of ownership.

• Easy system set-up through simple Wizard and Drag & Drop menus • Auto-detecttion of all hardware with listing in main menu • Interactive help menu

Guided installation The new VikinX System Configurator provides wizards and convenient drag & drop menus that comfortably guide the operator through the installation process.

Eliminate the obstacles The VikinX System Configurator is the company’s software tool

The most comprehensive and reliable routing switcher solutions

developed to eliminate the obstacles installers and operators face,

Together with Network Electronics’ proven routing hardware VikinX

when setting-up and configuring complex routing switcher solutions.

Modular and VikinX Compact, plus the new VikinX Sublime range of routing switchers, the new software solutions provide the most

Advanced help menu whereever you are in the configuration process.

comprehensive and reliable routing switcher solutions in the business.

Selecting help will answer your questions related to your current configuration area.

The manual is available as print-out.

The system configurator is made to eliminate the obstacles installers and operators face when settingup and configuring complex routing switcher solutions.

network-electronics.com

| 199

VIKINX CONFIGURATION, CONTROL AND MONITORING

2.2 THOR THOR is the Windows-based router control system for the VikinX router series RS232

• Detect your router system automatically

Network Control Bus

• Control your routers with drag & drop interface • Lock and protect your crosspoints • Switch up to 16 virtual levels simultaneously Ethernet

THOR system requirements: • WinNT, Win2000, WinXP • Intel Pentium III 500 MHz

Ethernet

Ethernet

• 128 MB RAM and 50 MB hard disk space

Ethernet

• SVGA video adapter and monitor

THOR BASIC EDITION

All editions have the following basic functions and configuration possibilities:

• Router sizes up to 64x64

Control Functions • Matrix Views • Crosspoint Lock and Protection • Salvo

THOR STANDARD EDITION

pa c re at u

e

C O N TR OL GU I Matrix view • • • •

Fe

in Ti

el

iu em

Pr

St a nd

Ba

Fu n c t ion al i ty

si

c

ar

m

d

k

Configuration • Mnemonics and Icons

Upgrade 1

Drag & Drop router control

•

•

•

Virtual Router Mapping (Multilevel control)

•

•

•

Configurable Control GUI

•

TieLines manager

•

CONTROL FEATURES Crosspoint protection (lock, protect and prohibit) • • • •

Salvos

•

•

•

•

Salvo time scheduling

•

Categories and Groups

•

•

•

Crosspoint logging

•

•

•

COMMUNICATION FEATURES Single Computer to compact routers (RS-232) • • • •

Single computer to modular routers (TCP/IP)

•

•

•

•

Multiple computers on LAN

•

•

•

Remote computer on LAN or modem (PC to PC)

•

3rd party interface (protocol converting) (PC to device)

•

CONFIGURATION FEATURES Router configuration • • • •

Mnemonics and icons

•

•

•

•

User Management with login

•

•

•

64x64

64x64

NO

NO

N.A.

Router size limitation

200 | network-electronics.com

• Router sizes up to 64x64 Includes: • Basic Edition • Drag & Drop Router Control • Categories and Groups • Crosspoint Logging • Virtual Router Mapping (Multilevel Switching) • User Management

THOR PREMIUM EDITION • No router size limitation Includes: • Standard Edition • Multiple computers on LAN

Upgrade 3

THOR TIELINE EDITION • No router size limitation • Includes: Premium Edition TieLines Manager

Upgrade 2

VIKINX CONFIGURATION, CONTROL AND MONITORING

THOR

2.2

Ext r a f e at u res These features are available in THOR if extra control GUI or communication are needed.

Some communication features need extra hardware (included in the price).

CONTROL GUI FEATURES Salvo Scheduler

COMMUNICATION FEATURES LAN Multi User Interface Ethernet Interface to VikinX Compact

Hardware adapter

Routers and VikinX Sublime

(RS-232 to Ethernet

converter) ETH-CON

3rd Party Interface ETH-CON

G Salvo Scheduler • Timed salvo takes with salvo scheduler • Advanced reoccurrence options (hourly, daily, weekly and more) • Execute many salvos in a timed sequence with salvo sequence editor

Advanced Remote Control • PC (Modem) to PC (Modem) • PC (Modem) to Device Server

Device Server

Client

Client

Client

THOR

THOR

THOR

G Ethernet Interface to VikinX Compact aND VikinX Sublime • Direct connection of a VikinX Compact and VikinX Sublime Router with/without panel to Ethernet • Includes hardware adapter • More details on ETH-CON, see p. 35

MASTER

G LAN Multi User Interface (Standard Edition only) • Graphical Editor for making custom design router control views • Windows Internet Explorer HTML based control interface

F 3rd Party Interface • We support 3rd party interfaces by protocol converting • Includes ETH-CON as protocol interface

Client

THOR G Advanced Remote Control Special router control solutions • PC (Modem) to PC (Modem), remote THOR Client, connect to Master PC (must include LAN Multiuser) • PC (Modem) to Device Server, remote serial port by modem connection

network-electronics.com

| 201

VIKINX COMPACT

2.2 Small and Medium-sized Routers

Analog VIDEO

Analog AUDIO

COMPONENT Analog VIDEO

Network Electronics’ compact VikinX routers embody the company’s pioneering spirit by providing a ground-breaking price to performance ratio in a feature-rich range.

The units’ unparalleled ultra-thin housing was designed to accommodate facilities where real estate is at a premium.

Configurations, ranging from 8 x 4 to 64 x 64, address every application from broadcast to corporate to post-production.

202 | network-electronics.com

VIKINX COMPACT

Small and Medium-sized Routers

2.2

DIGITAL VIDEO

DIGITAL AUDIO

TELECOM

RS-422 DATA

PARTITIONING TABLE Router Size (square) FORMAT

64

32

Composite Video

64x64

32x32

Y/C (SVHS)

32x32

16x16

RGB/YUV

21x21

10x10

RGB/sync

16x16

8x8

Power Supply All VikinX Compact Frame

It is possible to reconfigure the switch groups

routers are supplied with a single

for all routers in the Compact Router Line via

desk-top power supply included

the configuration switch on the back-plane to

in the price.

create several formats of routers.

network-electronics.com

| 203

VIKINX COMPACT

2.2 Analog Video V6464

V3232

64x64

32x32

Specifications

Specifications

Frequency response 0-125MHz -3dB Differential gain typ. 0.08% (3.58/4.43MHz) Differential phase typ. 0.08° (3.58/4.43MHz) Crosstalk < -60dB (3.58/4.43MHz) Video S/N Ratio typ.70dB Bar tilt < 0.1% Lum. non-linearity < 0.1% Impedance 75 ohm Return loss typ. 40dB @ 10MHz Max signal 2 Vp-p VIT input 1Vpp, 300mV sync, 75ohm DC offset typ. < 15mV Propagation delay 15ns ± 1ns Coupling DC Connector BNC AC power External power supply 100–260 VAC DC power ±5V, connector DB9 male Dimensions 483x264x100 mm (19”, 6RU)

• Power down memory • RS-232 Interface • Network Control Bus

204 | network-electronics.com

Frequency response 0-125MHz -3dB Differential gain typ. 0.06% (3.58/4.43MHz) Differential phase typ. 0.06° (3.58/4.43MHz) Crosstalk < -60dB (3.58/4.43MHz) Video S/N Ratio typ.70dB Bar tilt < 0.1% Lum. non-linearity < 0.1% Impedance 75 ohm Return loss typ. 40dB @ 10MHz Max signal 2 Vp-p VIT input 1Vpp, 300mV sync, 75ohm DC offset typ. < 15mV Propagation delay 9ns ± 1ns Coupling DC Connector BNC AC power External power supply 100–260 VAC DC power ±5V, connector DB9 male Dimensions 483x132x100 mm (19”, 3RU)

• Power down memory • RS-232 Interface • Network Control Bus

VIKINX COMPACT

Analog Audio

2.2

A6464

A3232

64x64 32x32

Specifications

Specifications

Frequency response Crosstalk Clicknoise THD+N SNR Number of inputs

20Hz-100kHz ± 0.1dB > -100dB typ. <50dBu < 0.005% > 90dB ref. to 0dB 20Hz-20kHz 64 (Stereo) electronically balanced Input impedance >10 kohm Max input level +23dBu CMRR >75dB Max. input level + 23dBu Number of outputs 64 (Stereo) electronically balanced Output impedance 66 ohm Audio connector DB25 female AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x264x100 mm (19”, 6RU)

• 100kHz Audio Bandwidth • Power down memory • Programmable format • RS-232 Interface • Network Control Bus • Also usable as Time Code router

A6464 is also available as mono.

This unit is called A6464 Mono.

Frequency response 20Hz-100kHz ±0.1dB Crosstalk > -100dB Clicknoise < 60dBu THD+N < 0.005% SNR > 90dB ref. to 0dB 20Hz-20kHz Number of inputs 32 (Stereo) electronically balanced Input impedance > 10kohm Max input level + 23dBu CMRR > 75dB Number of outputs 32 (Stereo) electronically balanced Output impedance 66 ohm Audio connector DB25 female AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x132x100 mm (19”, 3RU)

• 100kHz Audio Bandwidth • Power down memory • Programmable format • RS-232 Interface • Network Control Bus • Also usable as Time Code router

network-electronics.com

| 205

VIKINX COMPACT

2.2 Component Analog Video

If our routers were any thinner We could ship them in envelopes

Component Analog Video Everything you want in a compact feature-rich design, including: • Seamless tri-step switching • External control system compatibility • Typ. 0–110/130MHz / -3dB@0dBm input signal • Audio breakaway possible • Up to 1600 x 1200 resolution • Built-in RS-232 interface • Built-in professional control panel Available in configurations of RGBHV, plus stereo analog audio.

Sizes include 16x16, 16x8, 8x8, 8x4.

Configurations The following formats may be configured (analog stereo audio and built-in control panel are both optional): 16x16 RGBHV + AA + CP 16x8 RGBHV + AA + CP 8x8 RGBHV + AA + CP 8x4 RGBHV + AA + CP

206 | network-electronics.com

VIKINX COMPACT

Component Analog Video

2.2

CAV0808 / CAV0804

CAV1616 / CAV1608

8x8 / 8x4

16x16 / 16x8

Video specifications Frequency response Number of inputs Number of outputs

Video specifications typical 0–110MHz / -3dB @ 0dBm input signal 8 8 or 4, depending on model

Audio specifications (Optional) Number of inputs Number of outputs

8 (Stereo), true balanced 8 or 4 (Stereo), depending on model, all true balanced

General Max. power consumption Dimensions

Frequency response Number of inputs Number of outputs

typical 0–130MHz / -3dB @ 0dBm input signal 16 16 or 8, depending on model

Audio specifications (Optional) Number of inputs Number of outputs

16 (Stereo), true balanced 16 or 8 (Stereo), depending on model, all true balanced

General <20W 483x132x35 mm (19”, 3RU)

Max. power consumption Dimensions

<40W 483x264x35 mm (19”, 6RU)

CAV0808 / CAV0804 / CAV1616 / CAV1608: Video specifications Differential gain typical 0.1% (3.58/4.43MHz) Differential phase typical 0.2° (3.58/4.43MHz) Crosstalk < -55dB (3.58/4.43MHz) Video S/N Ratio typical 70dB Bar tilt < 0.1% Lum. Non-linearity < 0.1% Impedance 75 ohm Return loss typical 38dB Max signal 2 Vp-p Coupling DC DC offset typ. 5mV Propagation delay 5ns ± 1ns Connector BNC Switching Seamless w/variable delay 2-5s, or VIT, selectable via DIP-switches.

PAL/NTSC selection on DIP-switches.

VIT loop

Audio specifications (Optional) Frequency response Crosstalk Click noise THD+N SNR Input impedance CMRR Max. Input level Output impedance Connector

20Hz-100kHz ± 0.1dB > -100dB < 60dBu < 0.003% > 100dB ref. to 0db 20Hz-20kHz > 10k ohm > 75dB + 25dBu 66 ohm DB25 female

Panel specifications (Optional) Salvos

Programmable/executable on panel

General AC Power External power supplies 100 – 260 VAC DC Power ±15V, connector DB9 male, equipped with 2x DB9 connectors

network-electronics.com

| 207

VIKINX COMPACT

2.2 SD Digital Video VD6464

VD3232

64x64

32x32

Specifications

Specifications

Data rate NRZ 143Mbps–540Mbps VIT Input Comp. Video 1Vpp, 300mV sync, 75ohm Equalization Automatic up to 300m (Belden 8281) Impedance 75 ohm Return loss in/out > 18dB (10MHz–270MHz) Signal level nom. 800mV Rise/fall time typ. 700ps Connector BNC AC power External power supply 100–260 VAC DC power +5V, connector DB9 male Dimensions 483x264x100 mm (19”, 6RU)

• D1 4:2:2 270Mbps Component • 143Mbps NTSC Composite • D2 177Mbps PAL Composite • Up to 540Mbps Data rate • Input Equalization • Network Control Bus • Power down memory • RS-232 Interface • DVB-ASI compatible

208 | network-electronics.com

Data rate NRZ 143Mbps–540Mbps VIT Input Comp. Video 1Vpp, 300mV sync, looped, 75ohm Equalization Automatic up to 300m (Belden 8281) Impedance 75 ohm Return loss in/out > 18dB (10MHz–270MHz) Signal level nom. 800mV Rise/fall time typ. 700ps Connector BNC AC power External power supply 100–260 VAC DC power +5V, connector DB9 male Dimensions 483x132x100 mm (19”, 3RU)

• D1 4:2:2 270Mbps Component • 143Mbps NTSC Composite • D2 177Mbps PAL Composite • Up to 540Mbps Data rate • Input Equalization • Network Control Bus • Power down memory • RS-232 Interface • DVB-ASI compatible

VIKINX COMPACT

Digital Audio

2.2

AD6464-110

AD3232-110

64x64

32x32

Specifications Signal type AES/EBU digital audio Number of inputs 64 transformer balanced Input impedance 110 ohm Number of outputs 64 transformer balanced Output impedance 110 ohm Jitter 800ps Delay 170ns Signal level 0.2 – 7Vpp Sampling rates 32 – 96kHz Switching mode Asynchronous Audio connector DB25 female AC power External power supply 100 or 260 VAC DC power +5V, connector DB9 male Dimensions 483x132x100 mm (19”, 3RU)

Also available as unbalanced 75 ohm (AD6464-75)

• 110 ohm balanced in- and outputs • 96kHz compatible • Sampling rates 32–96kHz • Power Down Memory • Programmable format • Network Control Bus • RS-232 Interface

Specifications Signal type AES/EBU digital audio Number of inputs 32 transformer balanced Input impedance 110 ohm Number of outputs 32 transformer balanced Output impedance 110 ohm Jitter 800ps Delay 170ns Signal level 0.2 – 7Vpp Sampling rates 32 – 96kHz Switching mode Asynchronous Audio connector DB25 female AC power External power supply 100 or 260 VAC DC power +5V, connector DB9 male Dimensions 483x132x100 mm (19”, 3RU)

Also available as unbalanced 75 ohm (AD3232-75)

• 110 ohm balanced in- and outputs • 96kHz compatible • Sampling rates 32–96kHz • Power Down Memory • Programmable format • Network Control Bus • RS-232 Interface

network-electronics.com

| 209

VIKINX COMPACT

2.2 Telecom T6464-34/45

T3232-34/45

64x64

32x32

• 34Mbps or 45Mbps Data rate • Input Equalization • Output-Reclocking • Meets ITU-T G.703 for HDB3 signals • RS-232 Interface • Network Control Bus

Specifications

Specifications

Data rate 34Mbps – 45Mbps G.703 HDB3 Equalization Automatic, up to 200m (Belden 8281) Impedance 75 ohm Re-clocking On outputs Return loss > 16dB (10MHz–270MHz) Signal level 1000 mV fixed, 75 ohm load Connector BNC AC Power External power supplies 100–260 VAC DC Power ±5V, connector DB9 male Max power consumption < 17.5W Dimensions 483x616x120 mm (19”, 14RU)

• Input Equalization • Network Control Bus • RS-232 Interface

210 | network-electronics.com

Data rate 34Mbps–45Mbps G.703 HDB3 Equalization Automatic up to 200m (Belden 8281) Re-clocking on outputs Impedance 75 ohm Return-loss > 16dB Signal level 1000mV fixed on 75 ohm load Connector BNC AC power External power supply 100–260 VAC Power option 24–72V DC DC power ±5V, connector DB9 male Dimensions 483x308x100 mm (19”, 7RU)

• Input Equalization • Network Control Bus • RS-232 Interface

VIKINX COMPACT

Telecom

2.2

T6464-140/155

T3232-140/155

64x64

32x32

• 140Mbps or 155Mbps Data rate • Input Equalization • Non-Reclocking • Meets ITU-T G.703 for CMI signals • RS-232 Interface • Network Control Bus

Specifications

Specifications

Data rate 140Mbps – 155Mbps G.703 CMI Equalization Automatic, up to 200m (Belden 8281) Impedance 75 ohm Return loss > 16dB (10MHz – 270MHz) Signal level 1000 mV fixed, 75 ohm load Connector BNC AC Power External power supplies 100–260 VAC DC Power +5V, 2 pin Molex Connector Max power consumption < 80W Dimensions 483x264x120 mm (19”, 6RU)

• Input Equalization • Network Control Bus • RS-232 Interface

Data rate 140Mbps–155Mbps G.703 CMI Equalization Automatic up to 200m (Belden 8281) Impedance 75 ohm Return-loss > 16dB Signal level 1000mV fixed on 75 ohm load Connector BNC AC power External power supply 100–260 VAC Power option 24–72V DC DC power +5V, connector DB9 male Dimensions 483x132x100 mm (19”, 3RU)

• Input Equalization • Network Control Bus • RS-232 Interface

network-electronics.com

| 211

VIKINX COMPACT

2.2 RS-422 Data D3232

32x32

Specifications Data rate 5Mbps Connector DB9 female AC Power External power supply 100–260VAC DC Power +5V, connector DB9 male Dimensions 483x220x35 mm (19”, 5RU)

• Machine and edit control • State of the art quality • Power down memory • For production systems • RS-232 Interface • Network Control Bus

212 | network-electronics.com

2.2

network-electronics.com

| 213

VIKINX ACCESSORIES

2.2 VikinX Accessories All Network Electronics products have a single desktop power supply included in the unit price. Below you will find some options for single or redundant power supply in 19”-2RU.

Order no. Description: FR-PWR-1S Frame, 1 x Motherboard and 1 x Power Supply, handles up to 5 VikinX devices FR-PWR-1R Frame, 1 x Motherboard and 2 x Power Supplies, handles up to 5 VikinX devices FR-PWR-2S Frame, 2 x Motherboards and 2 x Power Supplies, handles up to 10 VikinX devices FR-PWR-2R Frame, 2 x Motherboards and 4 x Power Supplies, handles up to 10 VikinX devices FR-PWR-3S Frame, 3 x Motherboards and 3 x Power Supplies, handles up to 15 VikinX devices FR-PWR-3R Frame, 3 x Motherboards and 6 x Power Supplies, handles up to 15 VikinX devices FR-PWR-4S Frame, 4 x Motherboards and 4 x Power Supplies, handles up to 20 VikinX devices FR-PWR-4R Frame, 4 x Motherboards and 8 x Power Supplies, handles up to 20 VikinX devices Specify Power Cables (quantity of each type) when ordering FR-PWR-xx. See below.

19”-2RU power supply frame can be equipped with up to 4 Motherboards, where each Motherboard can house up to 2 power supplies (single or redundant) of all VikinX equipment (routers, amplifiers, converters) up to the VikinX.32 Router Family, as well as AD6464-110 and A6464 Mono. For A6464 Stereo, please specify PSU’s for each Mono frame!

Power Cables for FR-PWR-xx DC-DC-+/-5V Cable, 1,5m (5 ft.), interconnects FR-PWR-xx and VikinX devices +/-5V Typical products: VIDEO DC-DC-+/-15V Cable, 1,5m (5 ft.), interconnects FR-PWR-xx and VikinX devices +/-15V Typical products: AUDIO FR-PWR-2R-V Rack mount Redundant PSU solution for V6464 and AD-6464-75. Frame, 2 x Motherboards and 4 x Power Supplies, incl. dedicated DC/DC PSU-Router cable FR-PWR-3R-VD Rack mount Redundant PSU solution for VD6464. Frame, 3 x Motherboards and 6 x Power Supplies, incl. dedicated DC/DC PSURouter cable

Each motherboards have 5 DC power outlets. GPI Alarm per power supply included. Each power supply gives 60W. Autosensing 100-240VAC. Please call for 48V DC solutions.

Note that all routers and control panels are supplied with single desktop power supply as standard.

UPGRADE AND SPARE PARTS MODULES

Power Supply Module for FR-PWR-xx PWR-AC Power supply with 2 x 15V and 2 x 5V, 60W, 15/15/5/5V input 110-260VAC auto-sensing, for spare or redundant supply PWR-DC Power supply with 2 x 15V and 2 x 5V, 60W, input 15/15/5/5V 36-72VDC, for spare or redundant supply

Backplane for power supply modules for FR-PWR-xx BCK-PL Backplane for Power Supply Modules for FRPWR-xx, can hold 2 x PSU modules

Fan FR-Fan-1RU

PWR-AC15/15/5/5V

214 | network-electronics.com

Fan for ventilation, 1 RU. Please call for further instructions.

VIKINX ACCESSORIES

VikinX Accessories DESKTOP Power Supply Units (PSU) NUMBER

ITEM

DESCRIPTION

AC DESKTOP POWER FOR VIKINX SUBLIME 12876

SL-PWR-90

For SL-HD6464-R/-CP, SL-SD6464R/-CP, SL-A6464/-CP , SL-A3232/-CP, SL-V6464/-CP

12450

SL-PWR-40

For all other Sublime Routers

AC Desktop Power For VikinX Compact 12450

SL-PWR-40

For A3232, A6464 Mono A6464 (1 router requires 2 units.

Must be ordered separately)

16675

DP AC +/-5V / 35W

For AD3232-75, AD3232-110, AD6464-75, AD6464-110

12450

SL-PWR-40

For CAV0804, CAV0808, CAV1608, CAV1616, incl. Variants

16675

DP AC +/-5V / 35W

For D3232

16675

DP AC +/-5V / 35W

For RECL8

16675

DP AC +/-5V / 35W

For T3232-140/155, T3232-34/45, T6464-34/45

11082

DP AC +5V / 110W

For T6464-140/155 (For redundant power, choose FR-PWR-3R-VD)

16675

DP AC +/-5V / 35W

For V3232, V6464

16675

DP AC +/-5V / 35W

For VD3232

11082

DP AC +5V / 110W

For VD6464 (For redundant power, choose FR-PWR-3R-VD)

AC DESKTOP POWER FOR CONTROL PANELS 12450

SL-PWR-40

For Sublime Panels

16675

DP AC +/-5V / 35W

For IP Panels

11079

DP AC +/-5V / 10W

For Compact Panels

2.2 Accessories

Y-cable, for redundant power

A necessary item to combine two power supplies for redundancy TOOL-KIT RJ45-NCB Connector Matchbox (adapter) between RJ45 and NCB (Network Control Bus), incl. 2 x NCB 0.3 and 2 x RJ45-RJ45-0.3 RJ45-NCB-ADP Connector Matchbox (adapter) between RJ45 and NCB (Network Control Bus) DB25Pin Adaptor Small print-card with DB25 to screw-terminal

NCB-bus Cable incl. Connectors NCB-0,3 NCB-1,5 NCB-3,0 NCB-7,5 NCB-15

NCB (Network Control Bus) 0.3 meter cable NCB (Network Control Bus) 1.5 meter cable NCB (Network Control Bus) 3.0 meter cable NCB (Network Control Bus) 7.5 meter cable NCB (Network Control Bus) 15 meter cable

NCB-25 NCB-50 NCB-xx

NCB (Network Control Bus) 25 meter cable NCB (Network Control Bus) 50 meter cable NCB (Network Control Bus) longer lengths

Audio DB25 to XLR 3m x XLRF-25pin 3m x XLRM-25pin

Network DB25pin Audio Contact to 8 x XLRF (Female), 3 meter cable Network DB25pin Audio Contact to 8 x XLRF (Male), 3 meter cable

AC DESKTOP POWER FOR 1 RU FLASHLINK COMPACT DISTRIBUTION AMPLIFIERS 11084

DP AC +/-15V / 10W

For AV0110, A0108DS

11079

DP AC +/-5V / 10W

For AD0108Q, V0106Q, V0106DEQ, SDI0106Q

AC DESKTOP POWER FOR N-BOX 11084

DP AC +/-15V / 10W

For N-BOX (or use SL-PWR-40!)

DC DESKTOP POWER FOR VIKINX COMPACT 11081

DP DC +/-15V / 30W

For A3232, A6464 Mono A6464 (1 router requires 2 units.

Must be ordered separately)

11080

DP DC +/-5V / 30W

For AD3232-75, AD3232-110, AD6464-75, AD6464-110

11081

DP DC +/-15V / 30W

For CAV0804, CAV0808, CAV1608, CAV1616, incl. Variants

11080

DP DC +/-5V / 30W

For D3232

11080

DP DC +/-5V / 30W

For RECL8

11080

DP DC +/-5V / 30W

For T3232-140/155, T3232-34/45, T6464-34/45

11080

DP DC +/-5V / 30W

For V3232, V6464 (For redundant power, choose FR-PWR-2R-V)

11080

DP DC +/-5V / 30W

For VD3232

DC DESKTOP POWER FOR CONTROL PANELS 11081

DP DC +/-15V / 30W

For Sublime Panels

11080

DP DC +/-5V / 30W

For IP Panels

11080

DP DC +/-5V / 30W

For Compact Panels

DC DESKTOP POWER FOR 1 RU FLASHLINK COMPACT DISTRIBUTION AMPLIFIERS 11081

DP DC +/-15V / 30W

For AV0110, A0108DS

11080

DP DC +/-5V / 30W

For AD0108Q, V0106Q, V0106DEQ, SDI0106Q

DC DESKTOP POWER FOR N-BOX 11081

DP DC +/-15V / 30W

For N-BOX

network-electronics.com

| 215

NETCARE SERVICES

2.3 NetCare

NetCare is the name of the technical support activities offered by Network Electronics, for services on the purchased products.

NetCare covers: • Commissioning and Configuration Assistance • Service and Support • Product training Note: Network Electronics offers • 3-year standard warranty on hardware products from Network Electronics • 2-year standard warranty on the software products from Network Electronics

For “General Conditions for Sales” and “Limited Warranty” visit www.network-electronics.com

All details in this catalog are given information and shall not form part of any contract. All technical information is subject to be changed without notice.

216 | network-electronics.com

The Global Video Transport Leader

Video Products Group, Inc.

1600 Emerson Avenue, Oxnard, CA 93033, USA Tel: +1 (805) 247-8560 Fax: +1 (805) 247-8561

network-electronics.com • vpginc.com

Graphic design: Charlotte.no • Print: BK grafisk, Sandefjord/Norway

Network Electronics AS

P.O. Box 1020, 3204 Sandefjord, Norway Tel: +47 33 48 99 99 Fax: +47 33 48 99 98