Kennametal Innovations 02 Metric by MostWantIT

kennametal.com

INNOVATIONS

2021 | 02 | METRIC

HPR DRILL

For high-volume cast iron production.

Material-speciﬁc low-thrust drill point design for maximum hole straightness. Patented corner radius for long tool life and excellent hole quality.

Wide ﬂute cross section for hassle-free chip evacuation.

Ultra-high polished ﬂutes, providing minimum friction, improving chip evacuation and tool life.

INNOVATIONS Services & Support .........................................................................................................................................................................2–5 Contact Information ...................................................................................................................................................... 2–3 Spare Parts & Accessories Information • Online Catalogue ......................................................................................... 4–5 Holemaking ...................................................................................................................................................................................6–18 HPR Drill • Solid Carbide Drills ................................................................................................................................... 6–18 Milling .........................................................................................................................................................................................20–39 HARVI I TE • Solid Carbide End Mills ....................................................................................................................... 20–39 PCD Tooling.................................................................................................................................................................................40–54 Drills, End Mills, and Reamers for Aluminium Machining.......................................................................................... 40–54 General Information....................................................................................................................................................................56–58 Grades and Grade Descriptions...................................................................................................................................... 56 Key to Column Headings ................................................................................................................................................ 57 Material Cross Reference................................................................................................................................................ 58

kennametal.com

CAS — Customer Application Support

Get Fast and Reliable Answers to Your Toughest Problems Our CAS Team is the metalworking industry’s leading help desk resource for tooling application solutions and problem resolution.

Easy Access to Proven Metalworking Expertise! Kennametal Application Engineers assist customers and engineering groups throughout the world with expert tool selection and application recommendations for the entire range of Kennametal tooling.

Region

Originating Country

Language

CAS Hotline

North America

USA Mexico

English Spanish

800 835 3668 1800 253 0758

na.techsupport@kennametal.com na.techsupport@kennametal.com

Africa

South Africa

English

0800 981643

na.techsupport@kennametal.com

Europe

Austria Belgium Denmark Finland France Germany Israel Italy Netherlands Norway Poland Russia (landline) Russia (cell phone) Sweden UK Ukraine

German English/French English English French German English Italian English English Polish Russian Russian English English Russian

0800 202873 0800 80850 808 89298 0800 919412 080 5540 367 0800 0006651 1809 449889 800 916561 0800 0201 130 800 10080 0080 04411887 8800 5556394 +7 800 5556394 0207 99246 0800 032 8339 800 502664

eu.techsupport@kennametal.com eu.techsupport@kennametal.com na.techsupport@kennametal.com na.techsupport@kennametal.com eu.techsupport@kennametal.com eu.techsupport@kennametal.com na.techsupport@kennametal.com eu.techsupport@kennametal.com eu.techsupport@kennametal.com na.techsupport@kennametal.com eu.techsupport@kennametal.com eu.techsupport@kennametal.com eu.techsupport@kennametal.com na.techsupport@kennametal.com na.techsupport@kennametal.com eu.techsupport@kennametal.com

Asia Paciﬁc

Australia India Japan Korea (South) Malaysia New Zealand Singapore Taiwan Thailand

English English English English English English English English English

1800 666 667 1 800 103 5227 03 3820 2855 +82 2 2100 6100 1800 812 990 0800 450 941 1800 6221031 0800 666 197 1800 4417820

ap-kmt.techsupport@kennametal.com in.techsupport@kennametal.com ap-kmt.techsupport@kennametal.com ap-kmt.techsupport@kennametal.com ap-kmt.techsupport@kennametal.com ap-kmt.techsupport@kennametal.com ap-kmt.techsupport@kennametal.com ap-kmt.techsupport@kennametal.com ap-kmt.techsupport@kennametal.com

Numbers shown only serve the originating country listed.

kennametal.com

Service & Sales Centres Around the World

Region

Country

Sales Hotline

North America

United States Canada Mexico

+1 800 446 7738 +1 800 446 7738 +1 888 402 4963

FtMill.Service@kennametal.com toronto.service@kennametal.com k-mx.service@kennametal.com

Central/South America

Argentina Brazil Chile

+54 11 4719 0700 +55 19 3936 9200 +56 2 2264 1177

buenos-aires.ventas@kennametal.com bra.marketing@kennametal.com kennametalchile@kennametalchile.cl

Africa

Egypt South Africa

+44 1384 408060 +27 11 748 9300

na.techsupport@kennametal.com na.techsupport@kennametal.com

Europe

Austria Belgium Czech Republic France Germany Great Britain Hungary Ireland Italy Luxemborg Netherlands Poland Portugal Russia Slovakia Spain Turkey

+43 2236 3798980 +32 0800 81 372 +420 800 900 840 +33 1 60 12 81 00 +49 6003 8277 0 +44 1384 408060 +36 96 618 150 +44 1384 408060 +39 02 895 961 +32 4 248 48 48 +31 0800 44 33 201 +48 61 6656501 +351 22 4119 400 +7 495 4115386 +421 0800 044 053 +34 93 586 03 50 +90 216 574 4780

brunn.sales@kennametal.com belgium.sales@kennametal.com k-prha.sales@kennametal.com info.fr@kennametal.com rosbach.sales@kennametal.com kingswinford.service@kennametal.com gyoer.sales@kennametal.com na.techsupport@kennametal.com milano.vendite@kennametal.com liege.sales@kennametal.com netherlands.sales@kennametal.com poland.service@kennametal.com porto.service@kennametal.com moscow.information@kennametal.com k-eu-zilina.sales@kennametal.com barcelona.service@kennametal.com tr.information@kennametal.com

Asia Paciﬁc

Australia China India Indonesia Japan Korea (South) Malaysia New Zealand Singapore* Taiwan Thailand

+61 800 666 667 +86 400 889 2135 +91 800 103 5138 +65 6265 9222 +81 3 3820 2855 +82 2 2109 6100 +60 3 5569 9080 +64 0800 536626 +65 62659222 +886 4 2350 1920 +66 2 642 3455

k-au.service@kennametal.com k-cn.service@kennametal.com k-bngl.information@kennametal.com k-sg.sales@kennametal.com k-jp.service@kennametal.com k-kr-service@kennametal.com k-sg.sales@kennametal.com k-nz.service@kennametal.com k-sg.sales@kennametal.com taiwan.service@kennametal.com k-sg.sales@kennametal.com

*Vietnam and Philippines individuals should contact the Singapore office.

Visit kennametal.com to ﬁnd local Authorised Kennametal Distributors.

kennametal.com

Spare Parts & Accessories Information Lost a screw? Have to replace worn-out clamping wedges? Need to find and re-order those spare parts? Are you in need of some accessories, like a torque wrench or coolant shower plate? These tools are at your fingertips! Go to kennametal.com and find what you need in seconds. Enter the catalogue number of the corresponding tool, and it will display.

1 STEP 1

Enter the tool catalogue number here

2 STEP 2

Select the spare parts & accessories

Digitally access spare parts and accessories information to ensure you keep your operation running. Visit kennametal.com/novo and download today. It’s Free!

kennametal.com

Online Catalogue Can’t ﬁnd your paper copy of our catalogue anymore? No worries. Go to catalogues.kennametal.com to see what’s out there. Search for what you need, watch a video, and share pages with others, all from one site! Go to catalogues.kennametal.com, and if you want to check it out on your mobile device, just download the FREE app for iOS or Android™.

3 1

Search for what you need 1

Watch videos

Share with others

3 1 2

Check out our new catalogue app. Available in the Google Play™ Store or the App Store®

kennametal.com

Holemaking

HPR Drill Solid Carbide Drill for Cast Iron

Materials K

Applications Drilling

Drilling: Cross Hole

Drilling: Inclined Exit

Shank MQL

Drilling: Stacked Plates

kennametal.com/HPR-Drill

The HPR Drill is the ultimate solution for high-volume cast iron production, providing high-speed, high-feed drilling up to 8 x D with standard through coolant supply. Compared to universal drills, the HPR Drill allows for up to 2 times higher cutting parameters. HPR stands for highest metal removal rates (MRR), lowest cost-per-part (CPP), and more capacity on the shop ﬂoor.

kennametal.com

Material-speciﬁc lowthrust drill point design for maximum hole straightness.

4 margin lands. Maximum stability for cross-hole drilling and inclined exits.

Patented corner radius for long tool life and excellent hole quality.

All shanks are MQL-ready.

Patented AlTiN/AlTiSiN multilayer coating withstands abrasive and thermal loads to increase tool life.

Wide ﬂute cross section for hassle-free chip evacuation.

HPR Drill design features: • Patented corner radius, enabling long tool life, excellent hole quality, while avoiding workpiece chipping during exits. • Patented HPR point thinning, providing excellent self-centering capabilities with low thrust, enabling excellent hole straightness. • 4 margin lands, ideal for cross holes and inclined exits, providing maximum stability. • Ultra-high polished ﬂutes, providing minimum friction, improving chip evacuation and tool life. • MQL-ready! All shanks fulﬁll the DIN 6535 and 69090-03 requirements for minimum quantity lubrication.

kennametal.com

Solid Carbide Drills

TOOL SELECTION GUIDE • MATERIAL SPECIFIC DRILLS

HPR Drills

HPX Drills

SGL Drills

HPS Drills

Y-TECH™ Drills

KMH Drills

NEW!

Series

B254_HPR B255_HPR B256_HPR

B221_HPX B222_HPX

B224_HPX B225_HPX B226_HPX

B210_SGL B211_SGL B212_SGL

B284_HPS B285_HPS B286_HPS

B291_YPL B292_YPL

B941A

B951A

Page

11, 14**

16, 18, 21**

G38*

G88*

G94*

G126*

G127*

Workpiece material Primary

M S

Secondary

M S

P K

IT9–IT10

3,0–20,0mm

2,5–20,0mm

3,0–20,0mm

2,5–14,0mm

3,0–16,0mm

Drill length [L4 max]

14,0–160,0mm

14,0–85,0mm

14,0–160,0mm

12,0–160,0mm

14,0–124,0mm

14,0–77,0mm

14,0–43,0mm

14,0–45,0mm

Drilling depth L/D1

3–8 x D

3–5 x D

3–8 x D

3–5 x D

3xD

Point angle

143°

140°

135°

140°

142°

140°

Flute angle

30°

15°

30°

Hole tolerance Standard range Cutting diameter [D1]

Coolant

Operations

Flutes and margin

Corner chamfer

Shank

*See page in the Kennametal Master Catalogue 2018 • Volume Two • Rotating Tools, A-16-05217. **See page in the Kennametal Innovations 2020 • 01, A-19-05951. 䢇

Primary

嘷

Secondary

kennametal.com

Solid Carbide Drills

TOOL SELECTION GUIDE • VERSATILE DRILLS

GOdrill™

GOdrill

Kenna Universal™ Drills

Kenna Universal Drills

Series

B041A_CPG B042A_CPG

B051A_CPG B052A_CPG B053A_CPG

B966A B967A

B976A B977A B978A

Page

G8*

G14*

G130*

G134*, G139*

Workpiece material Primary

P M K N S

Secondary

M N S

IT9–IT10

Cutting diameter [D1]

1,0–20,0mm

3,0–20,0mm

2,4–20,0mm

Drill length [L4 max]

5,0–77,0mm

5,0–124,0mm

14,0–85,0mm

12,0–124,0mm

Drilling depth L/D1

3–5 x D

3–8 x D

3–5 x D

3–8 x D

Point angle

140°

140°/132°

Flute angle

30°

Hole tolerance Standard range

Coolant

Operations

Flutes and margin

Corner chamfer

Shank

*See page in the Kennametal Master Catalogue 2018 • Volume Two • Rotating Tools, A-16-05217. **See page in the Kennametal Innovations 2020 • 01, A-19-05951. 䢇

Primary

嘷

Secondary

kennametal.com

Solid Carbide Drills

HPR • CATALOGUE NUMBERING SYSTEM Each character in our catalogue number signifies a specific trait of that product. Use the following key columns and corresponding images to easily identify which attributes apply.

Solid Carbide Drills

HPR • B254 • 3 X D • INTERNAL COOLANT 䢇

first choice

嘷

alternate choice

P M K N S H

catalogue number B254A03000HPR B254A03100HPR B254A03175HPR B254A03200HPR

B254A03000HPR

D1 3,00 3,10 3,18 3 20

L 62 62 62 62

L3 20 20 20 20

L4 max 14 14 14 14

L5 0,9 0,9 0,9 09

LS 36 36 36 36

D 6 6 6 6

䢇

KCK10A

NEW!

䢇䢇䢇䢇

03000

HPR

Style

Drill Series

Length/ Coolant

Shank

Diameter

Point Geometry/ Application

B = Metric Shank

25* = Cast Iron Drills

03000 = 3mm 06350 = ¼" = E = 6,35mm

HPR = Next generation HP point for cast iron

K = Inch Shank

kennametal.com

4=~3xD 5=~5xD 6=~8xD

A = Form HA, straight round shank F = Form FE, Whistle Notch 2º (B series DIN 6535–2mm steps)

kennametal.com

Solid Carbide Drills

HPR • B254 • 3 X D • INTERNAL COOLANT 䢇

first choice

嘷

alternate choice

NEW!

catalogue number B254A03000HPR B254A03100HPR B254A03175HPR B254A03200HPR B254A03264HPR B254A03300HPR B254A03400HPR B254A03455HPR B254A03500HPR B254A03600HPR B254A03658HPR B254A03700HPR B254A03800HPR B254A03900HPR B254A03970HPR B254A04000HPR B254A04100HPR B254A04200HPR B254A04300HPR B254A04400HPR B254A04500HPR B254A04600HPR B254A04700HPR B254A04763HPR B254A04800HPR B254A04852HPR B254A04900HPR B254A05000HPR B254A05055HPR B254A05100HPR B254A05106HPR B254A05200HPR B254A05300HPR B254A05400HPR B254A05500HPR B254A05558HPR B254A05600HPR B254A05700HPR B254A05800HPR B254A06000HPR B254A06100HPR B254A06200HPR B254A06300HPR B254A06350HPR B254A06400HPR B254A06500HPR B254A06600HPR B254A06700HPR B254A06746HPR B254A06800HPR B254A07000HPR B254A07100HPR B254A07145HPR B254A07200HPR B254A07400HPR B254A07500HPR B254A07800HPR B254A07938HPR B254A08000HPR B254A08100HPR

D1 3,00 3,10 3,18 3,20 3,26 3,30 3,40 3,46 3,50 3,60 3,66 3,70 3,80 3,90 3,97 4,00 4,10 4,20 4,30 4,40 4,50 4,60 4,70 4,76 4,80 4,85 4,90 5,00 5,06 5,10 5,11 5,20 5,30 5,40 5,50 5,56 5,60 5,70 5,80 6,00 6,10 6,20 6,30 6,35 6,40 6,50 6,60 6,70 6,75 6,80 7,00 7,10 7,15 7,20 7,40 7,50 7,80 7,94 8,00 8,10

L 62 62 62 62 62 62 62 62 62 62 62 62 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 79 79 79 79 79 79 79 79 79 79 79 79 79 79 79 79 79 79 79 89

L3 20 20 20 20 20 20 20 20 20 20 20 20 24 24 24 24 24 24 24 24 24 24 24 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 34 34 34 34 34 34 34 34 34 34 34 41 41 41 41 41 41 41 41 47

L4 max 14 14 14 14 14 14 14 14 14 14 14 14 17 17 17 17 17 17 17 17 17 17 17 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 24 24 24 24 24 24 24 24 24 24 24 29 29 29 29 29 29 29 29 35

L5 0,9 0,9 0,9 0,9 1,0 1,0 1,0 1,0 1,0 1,1 1,1 1,1 1,1 1,1 1,2 1,2 1,2 1,2 1,3 1,3 1,3 1,4 1,4 1,4 1,4 1,4 1,4 1,5 1,5 1,5 1,5 1,5 1,6 1,6 1,6 1,6 1,6 1,7 1,7 1,8 1,8 1,8 1,9 1,9 1,9 1,9 1,9 2,0 2,0 2,0 2,1 2,1 2,1 2,1 2,2 2,2 2,3 2,3 2,4 2,4

LS 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 40

D 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10

䢇

KCK10A

P M K N S H

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

kennametal.com

Solid Carbide Drills

HPR • B254 • 3 X D • INTERNAL COOLANT (continued)

䢇

first choice

嘷

alternate choice

NEW!

catalogue number B254A08200HPR B254A08500HPR B254A08700HPR B254A08733HPR B254A08800HPR B254A09000HPR B254A09100HPR B254A09200HPR B254A09500HPR B254A09525HPR B254A09800HPR B254A10000HPR B254A10200HPR B254A10300HPR B254A10320HPR B254A10500HPR B254A10800HPR B254A11000HPR B254A11113HPR B254A11500HPR B254A11800HPR B254A12000HPR B254A12500HPR B254A12700HPR B254A13000HPR B254A13500HPR B254A14000HPR B254A14288HPR B254A14500HPR B254A15000HPR B254A15500HPR B254A16000HPR B254A16500HPR B254A17000HPR B254A17500HPR B254A18000HPR B254A18500HPR B254A19000HPR B254A20000HPR

D1 8,20 8,50 8,70 8,73 8,80 9,00 9,10 9,20 9,50 9,53 9,80 10,00 10,20 10,30 10,32 10,50 10,80 11,00 11,11 11,50 11,80 12,00 12,50 12,70 13,00 13,50 14,00 14,29 14,50 15,00 15,50 16,00 16,50 17,00 17,50 18,00 18,50 19,00 20,00

L 89 89 89 89 89 89 89 89 89 89 89 89 102 102 102 102 102 102 102 102 102 102 107 107 107 107 107 115 115 115 115 115 123 123 123 123 131 131 131

L3 47 47 47 47 47 47 47 47 47 47 47 47 55 55 55 55 55 55 55 55 55 55 60 60 60 60 60 65 65 65 65 65 73 73 73 73 79 79 79

L4 max 35 35 35 35 35 35 35 35 35 35 35 35 40 40 40 40 40 40 40 40 40 40 43 43 43 43 43 45 45 45 45 45 51 51 51 51 55 55 55

L5 2,4 2,5 2,6 2,6 2,6 2,6 2,7 2,7 2,8 2,8 2,9 2,9 3,0 3,0 3,0 3,1 3,2 3,2 3,3 3,4 3,5 3,5 3,7 3,7 3,8 4,0 4,1 4,2 4,3 4,4 4,6 4,7 4,8 5,0 5,1 5,3 5,4 5,6 5,9

LS 40 40 40 40 40 40 40 40 40 40 40 40 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 48 48 48 48 48 48 48 48 48 50 50 50

D 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12 14 14 14 14 14 16 16 16 16 16 18 18 18 18 20 20 20

䢇

KCK10A

P M K N S H

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

kennametal.com

Solid Carbide Drills

HPR • B255 • 5 X D • INTERNAL COOLANT 䢇

first choice

嘷

alternate choice

NEW!

catalogue number B255A03000HPR B255A03048HPR B255A03100HPR B255A03175HPR B255A03200HPR B255A03264HPR B255A03300HPR B255A03400HPR B255A03455HPR B255A03500HPR B255A03571HPR B255A03600HPR B255A03700HPR B255A03800HPR B255A03900HPR B255A03970HPR B255A04000HPR B255A04039HPR B255A04100HPR B255A04200HPR B255A04300HPR B255A04400HPR B255A04500HPR B255A04600HPR B255A04700HPR B255A04763HPR B255A04800HPR B255A04900HPR B255A05000HPR B255A05055HPR B255A05100HPR B255A05106HPR B255A05159HPR B255A05200HPR B255A05300HPR B255A05400HPR B255A05410HPR B255A05500HPR B255A05558HPR B255A05600HPR B255A05700HPR B255A05800HPR B255A05900HPR B255A05954HPR B255A06000HPR B255A06100HPR B255A06200HPR B255A06300HPR B255A06350HPR B255A06400HPR B255A06500HPR B255A06528HPR B255A06600HPR B255A06700HPR B255A06746HPR B255A06800HPR B255A06900HPR B255A07000HPR B255A07100HPR B255A07145HPR

D1 3,00 3,05 3,10 3,18 3,20 3,26 3,30 3,40 3,46 3,50 3,57 3,60 3,70 3,80 3,90 3,97 4,00 4,04 4,10 4,20 4,30 4,40 4,50 4,60 4,70 4,76 4,80 4,90 5,00 5,06 5,10 5,11 5,16 5,20 5,30 5,40 5,41 5,50 5,56 5,60 5,70 5,80 5,90 5,95 6,00 6,10 6,20 6,30 6,35 6,40 6,50 6,53 6,60 6,70 6,75 6,80 6,90 7,00 7,10 7,15

L 66 66 66 66 66 66 66 66 66 66 66 66 66 74 74 74 74 74 74 74 74 74 74 74 74 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 91 91 91 91 91 91 91 91 91 91 91 91 91 91 91

L3 28 28 28 28 28 28 28 28 28 28 28 28 28 36 36 36 36 36 36 36 36 36 36 36 36 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53

L4 max 23 23 23 23 23 23 23 23 23 23 23 23 23 29 29 29 29 29 29 29 29 29 29 29 29 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 43 43 43 43 43 43 43 43 43 43 43 43 43 43 43

L5 0,9 0,9 0,9 0,9 0,9 1,0 1,0 1,0 1,0 1,0 1,1 1,1 1,1 1,1 1,1 1,2 1,2 1,2 1,2 1,2 1,3 1,3 1,3 1,4 1,4 1,4 1,4 1,4 1,5 1,5 1,5 1,5 1,5 1,5 1,6 1,6 1,6 1,6 1,6 1,6 1,7 1,7 1,7 1,8 1,8 1,8 1,8 1,9 1,9 1,9 1,9 1,9 1,9 2,0 2,0 2,0 2,0 2,1 2,1 2,1

LS 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36

D 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

䢇

KCK10A

P M K N S H

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

kennametal.com

Solid Carbide Drills

HPR • B255 • 5 X D • INTERNAL COOLANT (continued)

䢇

first choice

嘷

alternate choice

NEW!

catalogue number B255A07200HPR B255A07300HPR B255A07400HPR B255A07500HPR B255A07541HPR B255A07600HPR B255A07700HPR B255A07800HPR B255A07900HPR B255A07938HPR B255A08000HPR B255A08100HPR B255A08200HPR B255A08300HPR B255A08334HPR B255A08400HPR B255A08500HPR B255A08600HPR B255A08700HPR B255A08733HPR B255A08800HPR B255A08900HPR B255A09000HPR B255A09100HPR B255A09129HPR B255A09200HPR B255A09300HPR B255A09400HPR B255A09500HPR B255A09525HPR B255A09600HPR B255A09700HPR B255A09800HPR B255A09900HPR B255A09921HPR B255A10000HPR B255A10100HPR B255A10200HPR B255A10300HPR B255A10320HPR B255A10400HPR B255A10500HPR B255A10600HPR B255A10700HPR B255A10716HPR B255A10800HPR B255A11000HPR B255A11100HPR B255A11113HPR B255A11200HPR B255A11500HPR B255A11509HPR B255A11600HPR B255A11700HPR B255A11800HPR B255A11900HPR B255A11908HPR B255A12000HPR B255A12100HPR B255A12200HPR

D1 7,20 7,30 7,40 7,50 7,54 7,60 7,70 7,80 7,90 7,94 8,00 8,10 8,20 8,30 8,33 8,40 8,50 8,60 8,70 8,73 8,80 8,90 9,00 9,10 9,13 9,20 9,30 9,40 9,50 9,53 9,60 9,70 9,80 9,90 9,92 10,00 10,10 10,20 10,30 10,32 10,40 10,50 10,60 10,70 10,72 10,80 11,00 11,10 11,11 11,20 11,50 11,51 11,60 11,70 11,80 11,90 11,91 12,00 12,10 12,20

L 91 91 91 91 91 91 91 91 91 91 91 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 124 124

L3 53 53 53 53 53 53 53 53 53 53 53 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 77 77

L4 max 43 43 43 43 43 43 43 43 43 43 43 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 60 60

L5 2,1 2,1 2,2 2,2 2,2 2,2 2,3 2,3 2,3 2,3 2,4 2,4 2,4 2,4 2,5 2,5 2,5 2,5 2,6 2,6 2,6 2,6 2,6 2,7 2,7 2,7 2,7 2,8 2,8 2,8 2,8 2,9 2,9 2,9 2,9 2,9 3,0 3,0 3,0 3,0 3,1 3,1 3,1 3,1 3,1 3,2 3,2 3,3 3,3 3,3 3,4 3,4 3,4 3,4 3,5 3,5 3,5 3,5 3,6 3,6

LS 36 36 36 36 36 36 36 36 36 36 36 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45

D 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 14 14

䢇

KCK10A

P M K N S H

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

kennametal.com

Solid Carbide Drills

HPR • B255 • 5 X D • INTERNAL COOLANT (continued)

䢇

first choice

嘷

alternate choice

NEW!

catalogue number B255A12300HPR B255A12304HPR B255A12400HPR B255A12500HPR B255A12600HPR B255A12700HPR B255A12800HPR B255A12900HPR B255A13000HPR B255A13100HPR B255A13500HPR B255A13700HPR B255A13800HPR B255A14000HPR B255A14100HPR B255A14200HPR B255A14288HPR B255A14500HPR B255A14700HPR B255A15000HPR B255A15300HPR B255A15400HPR B255A15500HPR B255A15800HPR B255A15875HPR B255A16000HPR B255A16300HPR B255A16500HPR B255A16670HPR B255A17000HPR B255A17463HPR B255A17500HPR B255A18000HPR B255A18500HPR B255A19000HPR B255A19050HPR B255A19500HPR B255A20000HPR

D1 12,30 12,30 12,40 12,50 12,60 12,70 12,80 12,90 13,00 13,10 13,50 13,70 13,80 14,00 14,10 14,20 14,29 14,50 14,70 15,00 15,30 15,40 15,50 15,80 15,88 16,00 16,30 16,50 16,67 17,00 17,46 17,50 18,00 18,50 19,00 19,05 19,50 20,00

L 124 124 124 124 124 124 124 124 124 124 124 124 124 124 133 133 133 133 133 133 133 133 133 133 133 133 143 143 143 143 143 143 143 153 153 153 153 153

L3 77 77 77 77 77 77 77 77 77 77 77 77 77 77 83 83 83 83 83 83 83 83 83 83 83 83 93 93 93 93 93 93 93 101 101 101 101 101

L4 max 60 60 60 60 60 60 60 60 60 60 60 60 60 60 63 63 63 63 63 63 63 63 63 63 63 63 71 71 71 71 71 71 71 77 77 77 77 77

L5 3,6 3,6 3,6 3,7 3,7 3,7 3,8 3,8 3,8 3,8 4,0 4,0 4,1 4,1 4,1 4,2 4,2 4,3 4,3 4,4 4,5 4,5 4,6 4,6 4,7 4,7 4,8 4,8 4,9 5,0 5,1 5,1 5,3 5,4 5,6 5,6 5,7 5,9

LS 45 45 45 45 45 45 45 45 45 45 45 45 45 45 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 50 50 50 50 50

D 14 14 14 14 14 14 14 14 14 14 14 14 14 14 16 16 16 16 16 16 16 16 16 16 16 16 18 18 18 18 18 18 18 20 20 20 20 20

䢇

KCK10A

P M K N S H

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

kennametal.com

Solid Carbide Drills

HPR • B256 • 8 X D • INTERNAL COOLANT 䢇

first choice

嘷

alternate choice

NEW!

catalogue number B256A03000HPR B256A03100HPR B256A03200HPR B256A03264HPR B256A03300HPR B256A03400HPR B256A03455HPR B256A03500HPR B256A03600HPR B256A03700HPR B256A03800HPR B256A03900HPR B256A04000HPR B256A04100HPR B256A04200HPR B256A04300HPR B256A04500HPR B256A04600HPR B256A04700HPR B256A04763HPR B256A04800HPR B256A04900HPR B256A05000HPR B256A05100HPR B256A05200HPR B256A05300HPR B256A05400HPR B256A05500HPR B256A05558HPR B256A05600HPR B256A05700HPR B256A05800HPR B256A06000HPR B256A06100HPR B256A06200HPR B256A06300HPR B256A06350HPR B256A06400HPR B256A06500HPR B256A06600HPR B256A06700HPR B256A06800HPR B256A07000HPR B256A07400HPR B256A07500HPR B256A07800HPR B256A08000HPR B256A08100HPR B256A08200HPR B256A08500HPR B256A08800HPR B256A09000HPR B256A09100HPR B256A09300HPR B256A09500HPR B256A09700HPR B256A09800HPR B256A10000HPR B256A10200HPR B256A10300HPR

D1 3,00 3,10 3,20 3,26 3,30 3,40 3,46 3,50 3,60 3,70 3,80 3,90 4,00 4,10 4,20 4,30 4,50 4,60 4,70 4,76 4,80 4,90 5,00 5,10 5,20 5,30 5,40 5,50 5,56 5,60 5,70 5,80 6,00 6,10 6,20 6,30 6,35 6,40 6,50 6,60 6,70 6,80 7,00 7,40 7,50 7,80 8,00 8,10 8,20 8,50 8,80 9,00 9,10 9,30 9,50 9,70 9,80 10,00 10,20 10,30

L 78 78 78 78 78 78 78 78 78 78 87 87 87 87 87 87 87 87 87 94 94 94 94 94 94 94 94 94 94 94 94 94 94 105 105 105 105 105 105 105 105 105 105 113 113 113 113 135 135 135 135 135 135 135 135 135 135 135 158 158

L3 40 40 40 40 40 40 40 40 40 40 49 49 49 49 49 49 49 49 49 56 56 56 56 56 56 56 56 56 56 56 56 56 56 67 67 67 67 67 67 67 67 67 67 74 74 74 74 92 92 92 92 92 92 92 92 92 92 92 110 110

L4 max 33 33 33 33 33 33 33 33 33 33 41 41 41 41 41 41 41 41 41 48 48 48 48 48 48 48 48 48 48 48 48 48 48 57 57 57 57 57 57 57 57 57 57 64 64 64 64 80 80 80 80 80 80 80 80 80 80 80 96 96

L5 0,9 0,9 0,9 1,0 1,0 1,0 1,0 1,0 1,1 1,1 1,1 1,1 1,2 1,2 1,2 1,3 1,3 1,4 1,4 1,4 1,4 1,4 1,5 1,5 1,5 1,6 1,6 1,6 1,6 1,6 1,7 1,7 1,8 1,8 1,8 1,9 1,9 1,9 1,9 1,9 2,0 2,0 2,1 2,2 2,2 2,3 2,4 2,4 2,4 2,5 2,6 2,6 2,7 2,7 2,8 2,9 2,9 2,9 3,0 3,0

LS 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 40 40 40 40 40 40 40 40 40 40 40 45 45

D 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 12 12

䢇

KCK10A

P M K N S H

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

kennametal.com

Solid Carbide Drills

HPR • B256 • 8 X D • INTERNAL COOLANT (continued)

䢇

first choice

嘷

alternate choice

NEW!

catalogue number B256A10400HPR B256A10500HPR B256A10700HPR B256A10800HPR B256A11000HPR B256A11500HPR B256A11800HPR B256A12000HPR B256A12200HPR B256A12500HPR B256A12700HPR B256A13000HPR B256A13500HPR B256A14000HPR B256A14500HPR B256A15000HPR B256A15500HPR B256A16000HPR B256A16500HPR B256A17000HPR B256A17500HPR B256A18000HPR

D1 10,40 10,50 10,70 10,80 11,00 11,50 11,80 12,00 12,20 12,50 12,70 13,00 13,50 14,00 14,50 15,00 15,50 16,00 16,50 17,00 17,50 18,00

L 158 158 158 158 158 158 158 158 176 176 176 176 176 176 197 197 197 197 214 214 214 214

L3 110 110 110 110 110 110 110 110 128 128 128 128 128 128 146 146 146 146 163 163 163 163

L4 max 96 96 96 96 96 96 96 96 112 112 112 112 112 112 128 128 128 128 144 144 144 144

L5 3,1 3,1 3,1 3,2 3,2 3,4 3,5 3,5 3,6 3,7 3,7 3,8 4,0 4,1 4,3 4,4 4,6 4,7 4,8 5,0 5,1 5,3

LS 45 45 45 45 45 45 45 45 45 45 45 45 45 45 48 48 48 48 48 48 48 48

D 12 12 12 12 12 12 12 12 14 14 14 14 14 14 16 16 16 16 18 18 18 18

䢇

KCK10A

P M K N S H

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

TOLERANCE nominal size range 1–3 >3–6 >6–10 >10–18 >18–25,4

D1 tolerance m7 0,002/0,012 0,004/0,016 0,006/0,021 0,007/0,025 0,008/0,029

D tolerance h6 0,000/-0,006 0,000/-0,008 0,000/-0,009 0,000/-0,011 0,000/-0,013

kennametal.com

Solid Carbide Drills

HPR DRILLS - B25_HPR • APPLICATION DATA

Material Group 1 2 K 3

min 130 90 70

kennametal.com

Cutting Speed — vc

Metric

Range — m/min

Recommended Feed Rate per Rev

Starting Value 160 130 90

max 210 180 130

mm/r mm/r mm/r

3,0 0,12–0,22 0,12–0,22 0,11–0,17

4,0 0,14–0,25 0,14–0,25 0,12–0,22

6,0 0,16–0,32 0,16–0,32 0,22–0,34

8,0 0,22–0,44 0,22–0,44 0,24–0,46

10,0 0,30–0,46 0,30–0,46 0,26–0,48

12,0 0,34–0,50 0,34–0,50 0,28–0,50

16,0 0,38–0,62 0,38–0,62 0,30–0,62

20,0 0,42–0,74 0,42–0,74 0,34–0,74

kennametal.com

Catalogue App Browse Pages

Search Products

Check out our new catalogue app. Available in the Google Play™ Store or the App Store® OR VISIT CATALOGS.KENNAMETAL.COM TODAY.

Watch a Video

Solid End Milling

HARVI™ I TE High-Performance Solid End Milling

Materials P

Applications Slotting

Helical Interpolation

3D Profiing

Plunge Milling

Side Milling/ Shoulder Milling

Trochoidal Milling

Ramping

Trochoidal Milling: Ball Nose

Slotting: Ball Nose

kennametal.com/HARVI1TE

Proprietary end face design — Twisted cutting edge increases corner stability, enabling soft cutting action even at highest ramping angles. Proprietary core design — Increases tool stability. Innovative end face design — Asymmetrical divided flutes and variable helix, enabling vibration dampening and unmatched feed rates. Proprietary relief — With AVF technology. A precision-faceted eccentric relief reduces vibrations and friction. For excellent cutting conditions in multiple materials. Proprietary flute design — Innovative chip gashes within the flutes reduce cutting forces and supports efficient chip evacuation.

kennametal.com

NEW!

Sharp edge, necked version available.

Twisted end face.

Asymmetrical divided ﬂutes and variable helix.

NEW!

Faceted eccentric relief with AVF-technology.

Short versions with sharp edge and chamfer available.

Chip gashes within the ﬂutes. NEW!

Short and long version with Ball Nose available.

HARVI™ I TE — Innovative proprietary design features driving maximum productivity. Universal character. Machines steel, stainless steel, cast iron, and high-temperature alloys with exceptional feed rates, reaching unmatched metal removal rates. Applicable for a variety of operations, including dynamic milling and extreme ramping operations. 4-fluted end mill for high-performance roughing and finishing with only one tool. HARVI I TE — Maximum metal removal. Maximum productivity. Maximum benefit.

kennametal.com

Solid Carbide End Mills

HARVI™ • TOOL SELECTION GUIDE HARVI I

HARVI I

HARVI I Chipbreaker

HARVI I Extended Reach

HARVI I TE

Series

F4AS...DL

UADE

F4AS.. WM-WX-WL/UBDE

F4BS.. WM-WX-WL

UADE

H1TE4CH..R..

H1TE4CH..N..

Page

P16*

P17*

P18*

P19*

P20*

Rougher

䢇

Finisher

嘷

Tool type

Chamfering Main operation Workpiece material Primary

P M K

P M K S

P M K

Secondary

S H

Corner style Corner radius [R¡]

—

0,50–6mm

0,50–4mm

—

0,40–0,50mm

—

0,40–0,50mm

0,15–0,35mm

4–25mm

6–25mm

6–20mm

4–25mm

Length of cut

1,8–3 x D1

3–4 x D

2–2,5 x D1

1,5 x D1

2 x D1

1,8–3 x D1

Maximum cutting depth [Ap1 max]

12–45mm

11–45mm

9–37,5mm

12–40mm

12–45mm

11–45mm

38°

36°/39°

Number of ﬂutes [ZU]

Centre cutting

Corner chamfer width [BCH] Cutter diameter [D1]

Flute helix angle

Additional operations

*See page in the Kennametal Master Catalogue 2018 • Volume Two • Rotating Tools, A-16-05217. 䢇

Primary

嘷

Secondary

kennametal.com

Solid Carbide End Mills

HARVI™ • TOOL SELECTION GUIDE HARVI I TE

HARVI I TE Ball Nose

HARVI I TE

NEW!

HARVI I TE

NEW!

HARVI I TE

NEW!

Series

H1TE4RA..N..

H1TEBN..N-L

H1TE4SE..N..

H1TE4CH..S..

H1TE4SE..S..

Page

Rougher

䢇

Finisher

嘷

Tool type

Chamfering Main operation Workpiece material Primary

Secondary

Corner style Corner radius [R¡]

0,50–6mm

—

0,1–0,35mm

—

6–25mm

2–20mm

2–25mm

Length of cut

1,5–2 x D1

1–2,5 x D1

1,8–3 x D1

1,2–2 x D1

Maximum cutting depth [Ap1 max]

9–37,5mm

2 –50mm

6–45mm

4–30mm

36°/39°

Number of ﬂutes [ZU]

Centre cutting

Corner chamfer width [BCH] Cutter diameter [D1]

Flute helix angle

Additional operations

*See page in the Kennametal Master Catalogue 2018 • Volume Two • Rotating Tools, A-16-05217.

䢇

Primary

嘷

Secondary

kennametal.com

Solid Carbide End Mills

HARVI™ • TOOL SELECTION GUIDE HARVI I Ball Nose

HARVI I Taper Ball Nose

HARVI II

Series

F4AW..WL-WX

F4AW..AWL38-AWX38

UCDE

UDDE

Page

P21*

P22*

P30*

P31–P32*

Rougher

䢇

Finisher

嘷

Tool type

Chamfering Main operation Workpiece material Primary

Secondary

P S

Corner style Corner radius [R¡]

—

0,25–0,75mm

0,20–6mm

Corner chamfer width [BCH]

—

6–16mm

4–10mm

4–25mm

6–25mm

1 x D1

5–7 x D

1,8–2,7 x D1

1,8–2,2 x D1

6–16mm

30,5–61mm

11–45mm

13–45mm

38°

Number of ﬂutes [ZU]

Centre cutting

Cutter diameter [D1] Length of cut Maximum cutting depth [Ap1 max] Flute helix angle

Additional operations

*See page in the Kennametal Master Catalogue 2018 • Volume Two • Rotating Tools, A-16-05217. 䢇

Primary

嘷

Secondary

kennametal.com

Solid Carbide End Mills

HARVI™ • TOOL SELECTION GUIDE HARVI III

HARVI III

HARVI III Ball Nose

HARVI III Taper Ball Nose

HARVI II Long

Series

UJDE

UJDE with neck

UJBE

UGDE 3 x D

UGDE 5 x D

Page

P48*

P49*

P54*

P62*

P36*

P37*

Rougher

嘷

Finisher

䢇

Tool type

Chamfering Main operation Workpiece material Primary

M S

P M S

Secondary

P H

K H

Corner style 0,50–0,75mm

0,50–6mm

—

0,20–6mm

—

10–25mm

10–20mm

4–10mm

6–25mm

2xD

3xD

1 x D1

5–7 x D

3xD

5xD

22–45mm

10–20mm

26–39mm

18–75mm

30–125mm

38°

43°

Number of ﬂutes [ZU]

Centre cutting

Corner radius [R¡] Corner chamfer width [BCH] Cutter diameter [D1] Length of cut Maximum cutting depth [Ap1 max] Flute helix angle

Additional operations

*See page in the Kennametal Master Catalogue 2018 • Volume Two • Rotating Tools, A-16-05217. 䢇

Primary

嘷

Secondary

kennametal.com

Solid Carbide End Mills

HARVI™ I TE • CATALOGUE NUMBERING SYSTEM Each character in our catalogue number signifies a specific trait of that product. Use the following key columns and corresponding images to easily identify which attributes apply. Solid Carbide End Mills

Solid Carbide End Mills

HARVI™ I TE • BALL NOSE • 4 FLUTES • REGULAR • PLAIN SHANK 䢇

first choice

嘷

alternate choice P M K N S H

order number 6768005 6768007 6768008 6768009 6768010

catalogue number H1TE4BN0200N002HAM H1TE4BN0300N003HAM H1TE4BN0400N004HAM H1TE4BN0500N005HAM H1TE4BN0600N006HAM

D1 2,00 3,00 4,00 5,00 6,00

D 4,00 4,00 4,00 6,00 6,00

D3 — 2,82 3,76 4,70 5,64

Ap1 max 2,00 3,00 4,00 5,00 6,00

L3 — 6,00 8,00 10,00 12,00

L 50,00 50,00 50,00 63,00 76,00

䢇䢇䢇嘷嘷

KCPM15

NEW!

䢇䢇䢇䢇䢇

H1TE4SE1200S016HAM

H1TE

SE RA

1200

S N

016 018

HA HB

R100

—

Series

Number of Flutes

Front End Style

Cutting Diameter D1

Flute Section Style

Length of Cut Ap1 max

Shank Style

Radius

Speciﬁc Features

Standard

H1TE = HARVI I TE

1 = 1-Flute 2 = 2-Flute 3 = 3-Flute 4 = 4-Flute 5 = 5-Flute 6 = 6-Flute 7 = 7-Flute 8 = 8-Flute 9 = 9-Flute M = Multiflute

SE = Sharp Edge CH = Chamfer RA = Radius BN = Ball Nose TB = Taper Ball Nose TO = Toroidal

Metric = D1 in mm Inch = D1 in decimal inch

N = Neck E = Extended Neck S = Short Without Neck R = Regular Without Neck L = Long Without Neck X = Extra Long Without Neck

Metric = Ap1 Max in mm

HA =Plain HB = Weldon® SL = Safe-Lock™ DL = Duo-Lock™

Inch = Ap1 Max in decimal inch

C = Chip Splitter I = Internal Coolant O = Coolant Grooves in Shank P = Polished Flutes

M= Metric Blank = Inch

Radius Metric R020 = 0,2mm R025 = 0,25mm R030 = 0,3mm R040 = 0,4mm R050 = 0,5mm R075 = 0,75mm R100 = 1,0mm R125 = 1,25mm R150 = 1,5mm R200 = 2,0mm R250 = 2,5mm R300 = 3,0mm R400 = 4,0mm R500 = 5,0mm R600 = 6,0mm

kennametal.com

Solid Carbide End Mills

HARVI™ I TE • BALL NOSE • 4 FLUTES • REGULAR • PLAIN SHANK first choice alternate choice P M K N S H

order number 6768005 6768007 6768008 6768009 6768010 6768031 6768032 6768033 6768034 6768035

catalogue number H1TE4BN0200N002HAM H1TE4BN0300N003HAM H1TE4BN0400N004HAM H1TE4BN0500N005HAM H1TE4BN0600N006HAM H1TE4BN0800N008HAM H1TE4BN1000N010HAM H1TE4BN1200N012HAM H1TE4BN1600N016HAM H1TE4BN2000N020HAM

D1 2,00 3,00 4,00 5,00 6,00 8,00 10,00 12,00 16,00 20,00

D 4,00 4,00 4,00 6,00 6,00 8,00 10,00 12,00 16,00 20,00

D3 — 2,82 3,76 4,70 5,64 7,52 9,40 11,28 15,04 18,80

Ap1 max 2,00 3,00 4,00 5,00 6,00 8,00 10,00 12,00 16,00 20,00

L3 — 6,00 8,00 10,00 12,00 16,00 20,00 24,00 32,00 40,00

L 50,00 50,00 50,00 63,00 76,00 100,00 121,00 125,00 150,00 166,00

䢇䢇䢇嘷嘷

KCPM15

NEW!

䢇嘷

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

HARVI I TE • BALL NOSE • 4 FLUTES • LONG • PLAIN SHANK 䢇

first choice

嘷

alternate choice

NEW!

order number 6767984 6767985 6767986 6767987 6767988 6767989 6767990 6768001 6768003 6768004

catalogue number H1TE4BN0200L005HAM H1TE4BN0300L008HAM H1TE4BN0400L010HAM H1TE4BN0500L013HAM H1TE4BN0600L015HAM H1TE4BN0800L020HAM H1TE4BN1000L025HAM H1TE4BN1200L030HAM H1TE4BN1600L040HAM H1TE4BN2000L050HAM

D1 2,00 3,00 4,00 5,00 6,00 8,00 10,00 12,00 16,00 20,00

D 4,00 4,00 4,00 6,00 6,00 8,00 10,00 12,00 16,00 20,00

Ap1 max 5,00 8,00 10,00 13,00 15,00 20,00 25,00 30,00 40,00 50,00

L 50,00 50,00 50,00 55,00 55,00 63,00 76,00 83,00 110,00 150,00

䢇䢇䢇嘷嘷

KCPM15

P M K N S H

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

kennametal.com

Solid Carbide End Mills

HARVI™ I TE • SQUARE END • 4 FLUTES • NECKED • PLAIN SHANK first choice alternate choice P M K N S H

order number 6769543 6769544 6769545 6769546 6769547 6769548 6769549 6769563 6769564 6769565 6769566 6769567 6769568 6769569 6769581

catalogue number H1TE4SE0200N006HAM H1TE4SE0250N006HAM H1TE4SE0300N008HAM H1TE4SE0350N010HAM H1TE4SE0400N011HAM H1TE4SE0500N013HAM H1TE4SE0600N013HAM H1TE4SE0800N016HAM H1TE4SE1000N022HAM H1TE4SE1200N026HAM H1TE4SE1400N026HAM H1TE4SE1600N032HAM H1TE4SE1800N035HAM H1TE4SE2000N038HAM H1TE4SE2500N045HAM

D1 2,00 2,50 3,00 3,50 4,00 5,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00 20,00 25,00

D 6,00 6,00 6,00 6,00 6,00 6,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00 20,00 25,00

D3 — — 2,82 3,29 3,76 4,70 5,64 7,52 9,40 11,28 13,16 15,04 16,92 18,80 24,00

Ap1 max 6,00 6,00 8,00 10,00 11,00 13,00 13,00 16,00 22,00 26,00 26,00 32,00 35,00 38,00 45,00

L3 — — 16,00 16,00 16,00 18,00 18,00 24,00 30,00 36,00 42,00 48,00 54,00 60,00 75,00

L 57,00 57,00 57,00 57,00 57,00 57,00 57,00 63,00 72,00 83,00 83,00 92,00 92,00 104,00 121,00

䢇䢇䢇嘷嘷

KCPM15

NEW!

䢇嘷

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

HARVI I TE • SQUARE END • 4 FLUTES • NECKED • WELDON® SHANK 䢇

first choice

嘷

alternate choice P M K N S H

order number 6769582 6769583 6769584 6769585 6769586 6769587 6769588 6769589 6769590 6769591 6769592 6769593 6769594 6769595 6769596

catalogue number H1TE4SE0200N006HBM H1TE4SE0250N006HBM H1TE4SE0300N008HBM H1TE4SE0350N010HBM H1TE4SE0400N011HBM H1TE4SE0500N013HBM H1TE4SE0600N013HBM H1TE4SE0800N016HBM H1TE4SE1000N022HBM H1TE4SE1200N026HBM H1TE4SE1400N026HBM H1TE4SE1600N032HBM H1TE4SE1800N035HBM H1TE4SE2000N038HBM H1TE4SE2500N045HBM

D1 2,00 2,50 3,00 3,50 4,00 5,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00 20,00 25,00

D 6,00 6,00 6,00 6,00 6,00 6,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00 20,00 25,00

D3 — — 2,82 3,29 3,76 4,70 5,64 7,52 9,40 11,28 13,16 15,04 16,92 18,80 24,00

Ap1 max 6,00 6,00 8,00 10,00 11,00 13,00 13,00 16,00 22,00 26,00 26,00 32,00 35,00 38,00 45,00

L3 — — 16,00 16,00 16,00 18,00 18,00 24,00 30,00 36,00 42,00 48,00 54,00 60,00 75,00

L 57,00 57,00 57,00 57,00 57,00 57,00 57,00 63,00 72,00 83,00 83,00 92,00 92,00 104,00 121,00

䢇䢇䢇嘷嘷

KCPM15

NEW!

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

kennametal.com

Solid Carbide End Mills

HARVI™ I TE • CHAMFERED • 4 FLUTES • SHORT • PLAIN SHANK

NEW!

䢇

first choice

嘷

alternate choice

order number 6769607 6769608 6769609 6769610 6769611 6769613 6769614 6769615 6769616 6769617 6769619 6769620 6769621 6769622 6769623

catalogue number H1TE4CH0200S004HAM H1TE4CH0250S005HAM H1TE4CH0300S006HAM H1TE4CH0350S007HAM H1TE4CH0400S008HAM H1TE4CH0500S009HAM H1TE4CH0600S010HAM H1TE4CH0800S012HAM H1TE4CH1000S014HAM H1TE4CH1200S016HAM H1TE4CH1400S018HAM H1TE4CH1600S022HAM H1TE4CH1800S024HAM H1TE4CH2000S026HAM H1TE4CH2500S030HAM

D1 2,00 2,50 3,00 3,50 4,00 5,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00 20,00 25,00

D 6,00 6,00 6,00 6,00 6,00 6,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00 20,00 25,00

Ap1 max 4,00 5,00 6,00 7,00 8,00 9,00 10,00 12,00 14,00 16,00 18,00 22,00 24,00 26,00 30,00

L 54,00 54,00 54,00 54,00 54,00 54,00 54,00 58,00 66,00 73,00 75,00 82,00 92,00 92,00 121,00

䢇䢇䢇嘷嘷

KCPM15

P M K N S H

BCH 0,10 0,10 0,10 0,10 0,15 0,15 0,15 0,20 0,25 0,25 0,25 0,35 0,35 0,35 0,35

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

HARVI I TE • CHAMFERED • 4 FLUTES • SHORT • WELDON® SHANK first choice alternate choice P M K N S H

order number 6769625 6769626 6769627 6769628 6769629 6769630 6769631 6769632 6769633 6769634 6769635 6769636 6769637 6769638 6769639

catalogue number H1TE4CH0200S004HBM H1TE4CH0250S005HBM H1TE4CH0300S006HBM H1TE4CH0350S007HBM H1TE4CH0400S008HBM H1TE4CH0500S009HBM H1TE4CH0600S010HBM H1TE4CH0800S012HBM H1TE4CH1000S014HBM H1TE4CH1200S016HBM H1TE4CH1400S018HBM H1TE4CH1600S022HBM H1TE4CH1800S024HBM H1TE4CH2000S026HBM H1TE4CH2500S030HBM

D1 2,00 2,50 3,00 3,50 4,00 5,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00 20,00 25,00

D 6,00 6,00 6,00 6,00 6,00 6,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00 20,00 25,00

Ap1 max 4,00 5,00 6,00 7,00 8,00 9,00 10,00 12,00 14,00 16,00 18,00 22,00 24,00 26,00 30,00

L 54,00 54,00 54,00 54,00 54,00 54,00 54,00 58,00 66,00 73,00 75,00 82,00 92,00 92,00 121,00

BCH 0,10 0,10 0,10 0,10 0,15 0,15 0,15 0,20 0,25 0,25 0,25 0,35 0,35 0,35 0,35

䢇䢇䢇嘷嘷

KCPM15

NEW!

䢇嘷

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

kennametal.com

Solid Carbide End Mills

HARVI™ I TE • SQUARE END • 4 FLUTES • SHORT • PLAIN SHANK

NEW!

䢇

first choice

嘷

alternate choice

order number 6769558 6769559 6769560 6769681 6769682 6769683 6769684 6769685 6769686 6769687 6769688 6769689 6769690 6769701 6769702

catalogue number H1TE4SE0200S004HAM H1TE4SE0250S005HAM H1TE4SE0300S006HAM H1TE4SE0350S007HAM H1TE4SE0400S008HAM H1TE4SE0500S009HAM H1TE4SE0600S010HAM H1TE4SE0800S012HAM H1TE4SE1000S014HAM H1TE4SE1200S016HAM H1TE4SE1400S018HAM H1TE4SE1600S022HAM H1TE4SE1800S024HAM H1TE4SE2000S026HAM H1TE4SE2500S030HAM

D1 2,00 2,50 3,00 3,50 4,00 5,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00 20,00 25,00

D 6,00 6,00 6,00 6,00 6,00 6,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00 20,00 25,00

Ap1 max 4,00 5,00 6,00 7,00 8,00 9,00 10,00 12,00 14,00 16,00 18,00 22,00 24,00 26,00 30,00

䢇䢇䢇嘷嘷

KCPM15

P M K N S H

L 54,00 54,00 54,00 54,00 54,00 54,00 54,00 58,00 66,00 73,00 75,00 82,00 92,00 92,00 121,00

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

HARVI I TE • SQUARE END • 4 FLUTES • SHORT • WELDON® SHANK 䢇

first choice

嘷

alternate choice

P M K N S H

order number 6769705 6769706 6769707 6769708 6769709 6769710 6769711 6769712 6769713 6769714 6769715 6769716 6769717 6769718 6769719

catalogue number H1TE4SE0200S004HBM H1TE4SE0250S005HBM H1TE4SE0300S006HBM H1TE4SE0350S007HBM H1TE4SE0400S008HBM H1TE4SE0500S009HBM H1TE4SE0600S010HBM H1TE4SE0800S012HBM H1TE4SE1000S014HBM H1TE4SE1200S016HBM H1TE4SE1400S018HBM H1TE4SE1600S022HBM H1TE4SE1800S024HBM H1TE4SE2000S026HBM H1TE4SE2500S030HBM

D1 2,00 2,50 3,00 3,50 4,00 5,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00 20,00 25,00

D 6,00 6,00 6,00 6,00 6,00 6,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00 20,00 25,00

Ap1 max 4,00 5,00 6,00 7,00 8,00 9,00 10,00 12,00 14,00 16,00 18,00 22,00 24,00 26,00 30,00

L 54,00 54,00 54,00 54,00 54,00 54,00 54,00 58,00 66,00 73,00 75,00 82,00 92,00 92,00 121,00

䢇䢇䢇嘷嘷

KCPM15

NEW!

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

kennametal.com

Solid Carbide End Mills

HARVI™ I TE • CHAMFERED • 4 FLUTES • PLAIN SHANK 䢇

first choice

嘷

alternate choice

order number 6767929 6767930 6767951 6767952 6675697 6675698 6675699 6675700 6675742 6675743 6675744 6675745 6675746 6675747 6675748

catalogue number H1TE4CH0200R005HAM H1TE4CH0250R006HAM H1TE4CH0300R007HAM H1TE4CH0350R008HAM H1TE4CH0400R012HAM H1TE4CH0500R013HAM H1TE4CH0600R013HAM H1TE4CH0800R016HAM H1TE4CH1000R022HAM H1TE4CH1200R026HAM H1TE4CH1400R026HAM H1TE4CH1600R032HAM H1TE4CH1800R032HAM H1TE4CH2000R038HAM H1TE4CH2500R045HAM

D1 2,00 2,50 3,00 3,50 4,00 5,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00 20,00 25,00

D 6,00 6,00 6,00 6,00 6,00 6,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00 20,00 25,00

Ap1 max 5,00 6,00 7,00 8,00 12,00 13,00 13,00 16,00 22,00 26,00 26,00 32,00 32,00 38,00 45,00

L 50,00 50,00 54,00 54,00 55,00 57,00 57,00 63,00 72,00 83,00 83,00 92,00 92,00 104,00 121,00

䢇䢇䢇嘷嘷

KCPM15

P M K N S H

BCH 0,20 0,20 0,30 0,30 0,40 0,40 0,40 0,40 0,50 0,50 0,50 0,50 0,50 0,50 0,50

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

HARVI I TE • CHAMFERED • 4 FLUTES • WELDON® SHANK first choice alternate choice P M K N S H

order number 6767953 6767954 6767955 6767956 6675749 6675750 6675751 6675752 6675753 6675754 6675755 6675756 6675757 6675758 6687137

catalogue number H1TE4CH0200R005HBM H1TE4CH0250R006HBM H1TE4CH0300R007HBM H1TE4CH0350R008HBM H1TE4CH0400R012HBM H1TE4CH0500R013HBM H1TE4CH0600R013HBM H1TE4CH0800R016HBM H1TE4CH1000R022HBM H1TE4CH1200R026HBM H1TE4CH1400R026HBM H1TE4CH1600R032HBM H1TE4CH1800R032HBM H1TE4CH2000R038HBM H1TE4CH2500R045HBM

D1 2,00 2,50 3,00 3,50 4,00 5,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00 20,00 25,00

D 6,00 6,00 6,00 6,00 6,00 6,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00 20,00 25,00

Ap1 max 5,00 6,00 7,00 8,00 12,00 13,00 13,00 16,00 22,00 26,00 26,00 32,00 32,00 38,00 45,00

L 50,00 50,00 54,00 54,00 55,00 57,00 57,00 63,00 72,00 83,00 83,00 92,00 92,00 104,00 121,00

BCH 0,20 0,20 0,30 0,30 0,40 0,40 0,40 0,40 0,50 0,50 0,50 0,50 0,50 0,50 0,50

䢇䢇䢇嘷嘷

KCPM15

䢇嘷

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

kennametal.com

Solid Carbide End Mills

HARVI™ I TE • CHAMFERED • 4 FLUTES • NECKED • PLAIN SHANK first choice alternate choice P M K N S H

order number 6767959 6767960 6767961 6767962 6676308 6676310 6676332 6676334 6676336 6676338 6676340 6676342 6676344 6676346

catalogue number H1TE4CH0200N006HAM H1TE4CH0250N006HAM H1TE4CH0300N008HAM H1TE4CH0350N010HAM H1TE4CH0400N011HAM H1TE4CH0500N013HAM H1TE4CH0600N013HAM H1TE4CH0800N016HAM H1TE4CH1000N022HAM H1TE4CH1200N026HAM H1TE4CH1400N026HAM H1TE4CH1600N032HAM H1TE4CH2000N038HAM H1TE4CH2500N045HAM

D1 2,00 2,50 3,00 3,50 4,00 5,00 6,00 8,00 10,00 12,00 14,00 16,00 20,00 25,00

D 6,00 6,00 6,00 6,00 6,00 6,00 6,00 8,00 10,00 12,00 14,00 16,00 20,00 25,00

D3 — — 2,82 3,29 3,76 4,70 5,64 7,52 9,40 11,28 13,16 15,04 18,80 24,00

Ap1 max 6,00 6,00 8,00 10,00 11,00 13,00 13,00 16,00 22,00 26,00 26,00 32,00 38,00 45,00

L3 — — 16,50 16,50 16,00 18,00 18,00 24,00 30,00 36,00 42,00 48,00 60,00 75,00

L 57,00 57,00 57,00 57,00 57,00 57,00 57,00 63,00 72,00 83,00 83,00 92,00 104,00 121,00

BCH 0,10 0,10 0,10 0,10 0,15 0,15 0,15 0,20 0,20 0,20 0,25 0,35 0,35 0,35

䢇䢇䢇嘷嘷

KCPM15

䢇嘷

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

HARVI I TE • CHAMFERED • 4 FLUTES • NECKED • WELDON® SHANK first choice alternate choice P M K N S H

order number 6767963 6767964 6767965 6767966 6676309 6676331 6676333 6676335 6676337 6676339 6676341 6676343 6676345 6676347

catalogue number H1TE4CH0200N006HBM H1TE4CH0250N006HBM H1TE4CH0300N008HBM H1TE4CH0350N010HBM H1TE4CH0400N011HBM H1TE4CH0500N013HBM H1TE4CH0600N013HBM H1TE4CH0800N016HBM H1TE4CH1000N022HBM H1TE4CH1200N026HBM H1TE4CH1400N026HBM H1TE4CH1600N032HBM H1TE4CH2000N038HBM H1TE4CH2500N045HBM

D1 2,00 2,50 3,00 3,50 4,00 5,00 6,00 8,00 10,00 12,00 14,00 16,00 20,00 25,00

D 6,00 6,00 6,00 6,00 6,00 6,00 6,00 8,00 10,00 12,00 14,00 16,00 20,00 25,00

D3 — — 2,82 3,29 3,76 4,70 5,64 7,52 9,40 11,28 13,16 15,04 18,80 24,00

Ap1 max 6,00 6,00 8,00 10,00 11,00 13,00 13,00 16,00 22,00 26,00 26,00 32,00 38,00 45,00

L3 — — 16,50 16,50 16,00 18,00 18,00 24,00 30,00 36,00 42,00 48,00 60,00 75,00

L 57,00 57,00 57,00 57,00 57,00 57,00 57,00 63,00 72,00 83,00 83,00 92,00 104,00 121,00

BCH 0,10 0,10 0,10 0,10 0,15 0,15 0,15 0,20 0,20 0,20 0,25 0,35 0,35 0,35

䢇䢇䢇嘷嘷

KCPM15

䢇嘷

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

kennametal.com

Solid Carbide End Mills

HARVI™ I TE • RADIUSED • 4 FLUTES • NECKED • PLAIN SHANK first choice alternate choice P M K N S H

order number 6767968 6767969 6676190 6676231 6676234 6676235 6676238 6676239 6676240 6676251 6676252 6676257 6676258 6676259 6676260 6676271 6676277 6676278 6676279 6676280 6676281 6676282 6676289 6676290 6676291 6676292 6676293 6676294 6676299 6676300 6676301 6676302 6676303 6676304

catalogue number H1TE4RA0400N006HAR025M H1TE4RA0400N006HAR050M H1TE4RA0600N009HAR050M H1TE4RA0600N009HAR100M H1TE4RA0800N012HAR050M H1TE4RA0800N012HAR100M H1TE4RA1000N015HAR050M H1TE4RA1000N015HAR100M H1TE4RA1000N015HAR200M H1TE4RA1000N015HAR300M H1TE4RA1000N015HAR400M H1TE4RA1200N018HAR050M H1TE4RA1200N018HAR100M H1TE4RA1200N018HAR200M H1TE4RA1200N018HAR300M H1TE4RA1200N018HAR400M H1TE4RA1600N024HAR050M H1TE4RA1600N024HAR100M H1TE4RA1600N024HAR200M H1TE4RA1600N024HAR300M H1TE4RA1600N024HAR400M H1TE4RA1600N024HAR600M H1TE4RA2000N030HAR050M H1TE4RA2000N030HAR100M H1TE4RA2000N030HAR200M H1TE4RA2000N030HAR300M H1TE4RA2000N030HAR400M H1TE4RA2000N030HAR600M H1TE4RA2500N038HAR050M H1TE4RA2500N038HAR100M H1TE4RA2500N038HAR200M H1TE4RA2500N038HAR300M H1TE4RA2500N038HAR400M H1TE4RA2500N038HAR600M

D1 4,00 4,00 6,00 6,00 8,00 8,00 10,00 10,00 10,00 10,00 10,00 12,00 12,00 12,00 12,00 12,00 16,00 16,00 16,00 16,00 16,00 16,00 20,00 20,00 20,00 20,00 20,00 20,00 25,00 25,00 25,00 25,00 25,00 25,00

D 6,00 6,00 6,00 6,00 8,00 8,00 10,00 10,00 10,00 10,00 10,00 12,00 12,00 12,00 12,00 12,00 16,00 16,00 16,00 16,00 16,00 16,00 20,00 20,00 20,00 20,00 20,00 20,00 25,00 25,00 25,00 25,00 25,00 25,00

D3 3,76 3,76 5,64 5,64 7,52 7,52 9,40 9,40 9,40 9,40 9,40 11,28 11,28 11,28 11,28 11,28 15,04 15,04 15,04 15,04 15,04 15,04 18,80 18,80 18,80 18,80 18,80 18,80 24,00 24,00 24,00 24,00 24,00 24,00

Ap1 max 6,00 6,00 9,00 9,00 12,00 12,00 15,00 15,00 15,00 15,00 15,00 18,00 18,00 18,00 18,00 18,00 24,00 24,00 24,00 24,00 24,00 24,00 30,00 30,00 30,00 30,00 30,00 30,00 37,50 37,50 37,50 37,50 37,50 37,50

L3 — — 18,00 18,00 24,00 24,00 30,00 30,00 30,00 30,00 30,00 36,00 36,00 36,00 36,00 36,00 48,00 48,00 48,00 48,00 48,00 48,00 60,00 60,00 60,00 60,00 60,00 60,00 75,00 75,00 75,00 75,00 75,00 75,00

L 57,00 57,00 63,00 63,00 68,00 68,00 76,00 76,00 76,00 76,00 76,00 83,00 83,00 83,00 83,00 83,00 100,00 100,00 100,00 100,00 100,00 100,00 115,00 115,00 115,00 115,00 115,00 115,00 135,00 135,00 135,00 135,00 135,00 135,00

R¡ 0,25 0,50 0,50 1,00 0,50 1,00 0,50 1,00 2,00 3,00 4,00 0,50 1,00 2,00 3,00 4,00 0,50 1,00 2,00 3,00 4,00 6,00 0,50 1,00 2,00 3,00 4,00 6,00 0,50 1,00 2,00 3,00 4,00 6,00

嘷䢇嘷䢇嘷

KCSM15

䢇嘷

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

kennametal.com

Solid Carbide End Mills

HARVI™ I TE • RADIUSED • 4 FLUTES • NECKED • WELDON® SHANK first choice alternate choice P M K N S H

order number 6767970 6767981 6676232 6676233 6676236 6676237 6676253 6676254 6676255 6676256 6687139 6676272 6676273 6676274 6676275 6676276 6676283 6676284 6676285 6676286 6676287 6676288 6676295 6676296 6676297 6676298 6687140 6687151 6676305 6687152 6687153 6687154 6676306 6676307

catalogue number H1TE4RA0400N006HBR025M H1TE4RA0400N006HBR050M H1TE4RA0600N009HBR050M H1TE4RA0600N009HBR100M H1TE4RA0800N012HBR050M H1TE4RA0800N012HBR100M H1TE4RA1000N015HBR050M H1TE4RA1000N015HBR100M H1TE4RA1000N015HBR200M H1TE4RA1000N015HBR300M H1TE4RA1000N015HBR400M H1TE4RA1200N018HBR050M H1TE4RA1200N018HBR100M H1TE4RA1200N018HBR200M H1TE4RA1200N018HBR300M H1TE4RA1200N018HBR400M H1TE4RA1600N024HBR050M H1TE4RA1600N024HBR100M H1TE4RA1600N024HBR200M H1TE4RA1600N024HBR300M H1TE4RA1600N024HBR400M H1TE4RA1600N024HBR600M H1TE4RA2000N030HBR050M H1TE4RA2000N030HBR100M H1TE4RA2000N030HBR200M H1TE4RA2000N030HBR300M H1TE4RA2000N030HBR400M H1TE4RA2000N030HBR600M H1TE4RA2500N038HBR050M H1TE4RA2500N038HBR100M H1TE4RA2500N038HBR200M H1TE4RA2500N038HBR300M H1TE4RA2500N038HBR400M H1TE4RA2500N038HBR600M

D 6,00 6,00 6,00 6,00 8,00 8,00 10,00 10,00 10,00 10,00 10,00 12,00 12,00 12,00 12,00 12,00 16,00 16,00 16,00 16,00 16,00 16,00 20,00 20,00 20,00 20,00 20,00 20,00 25,00 25,00 25,00 25,00 25,00 25,00

D3 3,76 3,76 5,64 5,64 7,52 7,52 9,40 9,40 9,40 9,40 9,40 11,28 11,28 11,28 11,28 11,28 15,04 15,04 15,04 15,04 15,04 15,04 18,80 18,80 18,80 18,80 18,80 18,80 24,00 24,00 24,00 24,00 24,00 24,00

R¡ 0,25 0,50 0,50 1,00 0,50 1,00 0,50 1,00 2,00 3,00 4,00 0,50 1,00 2,00 3,00 4,00 0,50 1,00 2,00 3,00 4,00 6,00 0,50 1,00 2,00 3,00 4,00 6,00 0,50 1,00 2,00 3,00 4,00 6,00

嘷䢇嘷䢇嘷

KCSM15

䢇嘷

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

kennametal.com

Solid Carbide End Mills

HARVI™ I TE • 4 FLUTES • APPLICATION DATA

Side Milling (A) and Slotting (B)

Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%. KCPM15

A Material Group 0 1 2 3 P 4 5 6 1 M 2 3 1 2 K 3 1 2 S 3 4 1 H 2

ap 1,5 x D1 1,5 x D1 1,5 x D1 1,5 x D1 1,5 x D1 1,5 x D1 1,5 x D1 1,5 x D1 1,5 x D1 1,5 x D1 1,5 x D1 1,5 x D1 1,5 x D1 1,5 x D1 1,5 x D1 1,5 x D1 1,5 x D1 1,5 x D1 1,5 x D1

ae 0,5 x D1 0,5 x D1 0,5 x D1 0,5 x D1 0,5 x D1 0,5 x D1 0,5 x D1 0,5 x D1 0,5 x D1 0,5 x D1 0,5 x D1 0,5 x D1 0,5 x D1 0,3 x D1 0,3 x D1 0,5 x D1 0,5 x D1 0,5 x D1 0,2 x D1

B ap 1,25 x D1 1,25 x D1 1,25 x D1 1,25 x D1 1,25 x D1 1,25 x D1 1,25 x D1 1,25 x D1 1,25 x D1 1,00 x D1 1,00 x D1 1,00 x D1 1,00 x D1 0,75 x D1 0,75 x D1 0,50 x D1 1,25 x D1 1,00 x D1 1,00 x D1

D1 — Diameter

Cutting Speed — vc m/min min 150 150 140 120 90 60 50 90 60 60 120 110 110 50 50 25 50 80 70

– – – – – – – – – – – – – – – – – – –

max 200 200 190 160 150 100 75 115 80 70 150 140 130 90 80 40 60 140 120

mm fz fz fz fz fz fz fz fz fz fz fz fz fz fz fz fz fz fz fz

2,0 0,011 0,011 0,011 0,009 0,008 0,007 0,006 0,009 0,007 0,006 0,011 0,009 0,007 0,009 0,007 0,005 0,006 0,008 0,006

2,5 0,013 0,013 0,013 0,011 0,010 0,009 0,008 0,011 0,009 0,008 0,013 0,011 0,009 0,011 0,009 0,006 0,007 0,010 0,008

3,0 0,016 0,016 0,016 0,013 0,012 0,011 0,009 0,013 0,011 0,009 0,016 0,013 0,011 0,013 0,011 0,007 0,009 0,012 0,009

3,5 0,027 0,027 0,027 0,022 0,021 0,018 0,016 0,022 0,018 0,016 0,027 0,022 0,018 0,022 0,018 0,012 0,015 0,021 0,016

4,0 0,031 0,031 0,031 0,026 0,024 0,021 0,018 0,026 0,021 0,018 0,031 0,026 0,021 0,026 0,021 0,014 0,017 0,024 0,018

5,0 0,040 0,040 0,040 0,033 0,030 0,027 0,022 0,033 0,027 0,022 0,040 0,033 0,027 0,033 0,027 0,018 0,023 0,030 0,022

6,0 0,048 0,048 0,048 0,040 0,036 0,032 0,027 0,040 0,032 0,027 0,048 0,040 0,032 0,040 0,032 0,021 0,028 0,036 0,027

8,0 0,066 0,066 0,066 0,055 0,049 0,044 0,037 0,055 0,044 0,037 0,066 0,055 0,044 0,055 0,044 0,029 0,040 0,049 0,037

10,0 0,079 0,079 0,079 0,067 0,059 0,053 0,044 0,067 0,053 0,044 0,079 0,067 0,053 0,067 0,053 0,035 0,049 0,059 0,044

12,0 0,091 0,091 0,091 0,077 0,069 0,062 0,051 0,077 0,062 0,051 0,091 0,077 0,062 0,077 0,062 0,041 0,057 0,069 0,051

14,0 0,102 0,102 0,102 0,087 0,077 0,070 0,057 0,087 0,070 0,057 0,102 0,087 0,070 0,087 0,070 0,046 0,064 0,077 0,057

16,0 0,111 0,111 0,111 0,096 0,084 0,077 0,063 0,096 0,077 0,063 0,111 0,096 0,077 0,096 0,077 0,051 0,071 0,084 0,063

18,0 0,119 0,119 0,119 0,104 0,091 0,083 0,067 0,104 0,083 0,067 0,119 0,104 0,083 0,104 0,083 0,055 0,076 0,091 0,067

20,0 0,125 0,125 0,125 0,111 0,097 0,089 0,071 0,111 0,089 0,071 0,125 0,111 0,089 0,111 0,089 0,059 0,082 0,097 0,071

25,0 0,136 0,136 0,136 0,125 0,107 0,100 0,078 0,125 0,100 0,078 0,136 0,125 0,100 0,125 0,100 0,067 0,092 0,107 0,078

NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machinining centres, please adjust parameters accordingly on >12mm diameter. For tools with reach >5 x D, reduce fz by 30%. Slot milling aplications — for longest reach (L3) tools, reduce Ae by 30%.

HARVI I TE • 4 FLUTES • ADJUSTMENT FACTOR FOR FEED AND SPEED CALCULATION To calculate application specific cutting data, please use KV coefficient table to the right for adaptation of cutting speed and KFz for feed respectively. Vc new = Vc * Kv Fz new = Fz * KFz

Ae/D 0,50% 1,00% 1,60% 2,00% 4,00% 5,00% 8,00% 10,00% 20,00% 30,00% 40,00% 50,00% Speed factor

2,9

2,85

2,8

1,5

1,45

1,4

1,35

1,25

1,2

Feed factor

KFz

2,8

2,6

2,5

2,4

2,3

2,2

1,7

1,25

1,02

Calculation example: Application: D = 20mm; M2 material group; Ae = 2mm Cutting data recommendation: Vc = 80m/min; fz = 0,089mm/th Adjustment coefficients:Ae = 2mm equals 10,0%; Kv = 1,35; KFz = 1,7 Final cutting data recommendation: Vc new = 80 * 1,35 = 108m/min Fz new = 0,089 * 1,7 = 0,15mm/min

kennametal.com

Solid Carbide End Mills

HARVI™ I TE • APPLICATION INFORMATION • RAMPING Angle

Ramping Style

Hole -Ø / End Mill -Ø

—

Recommendation

Page

Recommendation

Page

See application data

See application data and reduce fz by 20%

1.15–1.35*

See min. Vc of application data

See application data and reduce fz by 20%

>1.35–1.6*

See application data

See application data and reduce fz by 10%

>1.6–1.9*

See application data

—

See min Vc of application data

See application data and reduce fz by 30%

1.15–1.35*

See min. Vc of application data

See application data and reduce fz by 30%

>1.35–1.6*

See medium range Vc of application data

See application data and reduce fz by 25%

>1.6–1.9*

See application data

See application data and reduce fz by 20%

—

See Vc from plunging data

See application data and reduce fz by 40%

1.15–1.35*

See Vc from plunging data

See application data and reduce fz by 40%

>1.35–1.6*

See min. Vc of application data

See application data and reduce fz by 35%

>1.6–1.9*

See medium range Vc of application data

See application data and reduce fz by 30%

—

See Vc from plunging data

See fz from plunging data

1.15–1.35*

See Vc from plunging data

See fz from plunging data

>1.35–1.6*

See Vc from plunging data

See fz from plunging data

>1.6–1.9*

See min. speed of application data

See fz from plunging data

0º–15º

>15º–30º

30º–45º

>45º

NOTE: Z effective = 2 — for all calculations. *Calculations are based on tool path of tool-centreline. For ISO P and K materials, coolant supply into cutting zone is preferred. For ISO M, S, and H materials, coolant supply into cutting zone is required.

Linear Ramping

Helical Ramping

max. dia.

min. dia.

Min. hole Ø = End mill -Ø x 1.1 + 2x corner configuration (Re/CHF) size. Hole -Ø/End mill -Ø min 1:1.15 Max. hole Ø = 2x End mill -Ø 2x corner configuration (Re/CHF) size. Hole -Ø/End mill -Ø max 1:1.9

kennametal.com

Solid Carbide End Mills

HARVI™ I TE • APPLICATION DATA • 90º PLUNGING f in mm/rev 0,18

0,17 0,16 0,15

0,14 0,13 0,12 0,11 0,10

0,09 0,08 0,07

0,06 0,05 0,04 0,03 0,02 0,01 0

Ø in mm 2,0

4,0

8,0

10,0

12,0

14,0

16,0

18,0

20,0

25,0

Applicable

Graph Number

Vc max m/min

Max Depth

䢇

150

1,5 x Ø

Preferred

䢇

150

1,5 x Ø

Recommended

䢇

150

1,5 x Ø

Recommended

䢇

115

1xØ

Recommended

䢇

100

1xØ

Recommended

䢇

0,5 x Ø

Required

䢇

0,5 x Ø

Required

䢇

0,75 x Ø

Required

䢇

0,5 x Ø

Required

䢇

0,5 x Ø

Required

䢇

120

1,5 x Ø

Recommended

䢇

110

1xØ

Required

䢇

100

1xØ

Required

嘷

0,3 x Ø

Required

嘷

0,1 x Ø

Required

嘷

0,1 x Ø

Required

嘷

0,2 x Ø

Required

嘷

0,3 x Ø

Required

嘷

0,2 x Ø

Required

ISO Material

6,0

Note

䢇

highly recommended

嘷

recommended

kennametal.com

Solid Carbide End Mills

HARVI™ I TE • APPLICATION INFORMATION

Materials to Cut

• • • • •

Cutting Speed

• Refer to application data recommendation.

Feed Rate

• Refer to application data recommendation. • Works in same feed rate range as standard 4FL high-versatility tools, for productivity advantage follow application recommendation.

Depth of Cut

• Refer to application data recommendation.

Coolant

• External coolant preferred for steel, stainless, high-temp alloys, and hardened materials. • Pressurized air applicable for carbon steels. • Minimal quantity lubrication (MQL) and dry applicable for carbon steels.

Adaptation

• • • •

Roughing Application

• Yes.

Finishing Application

• Yes.

Milling Strategy

• Traditional milling (full slotting, high Ae side and shoulder milling). • High velocity milling (dynamic milling, trochoidal milling).

Application Range

• • • • • • •

Engineered Solutions

• Available upon request.

Reconditioning Service

• Full reconditioning available with Kennametal reconditioning procedures. • Check services under Kennametal website for detailed information.

kennametal.com

Steels (P0-P5). Stainless steels (M1-M3). Cast iron (K1-K3). High-temp alloys (S1-S4). Hardened materials (H1-H2).

Hydraulic chuck with or without sleeve preferred. Weldon® adaptor for Weldon shank tools preferred for high Ap/high Ae applications, but not recommended for finishing applications. High-performance collet (HPMC) or milling power chucks applicable. Shrink adaptor applicable.

Full slotting. Shoulder milling. Peel milling and HPC techniques. Centre cutting. Linear ramping at unlimited angle and 90° plunging. Ramping into stainless and high-temperature alloys limited by coolant configuration. Helical interpolation.

kennametal.com

Solid Carbide End Mills

HARVI™ I TE • CAUSES AND REMEDIES FOR MILLING PROBLEMS PROBLEM

CAUSE

REMEDIES

• Tool pullout.

• High axial forces. • Wrong adaptor. • Unadapted application data.

• Use Weldon® chuck if applicable or adaptor with higher clamping force. • Reduce feed per tooth.

• Unevenly colored chips when slotting deep (>1.25 x D).

• Not enough coolant in cutting zone.

• Adjust coolant method to improve coolant in cutting zone.

• Sudden breakage when milling dry in Shrink Fit or hydraulic adaptor.

• Tool is too hot and loses fit in adaptor.

• Check temperature on adaptor/spindle. • Improve coolant provision or reduce cutting speed; eventually change to HPMC or Weldon, if applicable.

• Material build-up on cutting edge.

• Cold welding of material at cutting edge.

• Increase coolant in cutting zone. • Decrease cutting speed.

• High flank wear.

• Unadapted application data. • High tool runout.

• Decrease feed rate. • Check tool runout.

• Chipping on tool.

• • • • •

• Adjust to recommended speeds and feeds. • Adjust coolant method to improve coolant in cutting zone. • Check runout; eventually change to more stable adaptor. • Adjust clamping to clamp on uncoated area only. • Minimise overhang length.

kennametal.com

Unadapted application data. Insufficient coolant. High tool runout. Unstable adaptor. Clamping on coating area.

kennametal.com

PCD Tools

PCD Tools For Aluminium Machining

Materials N

Applications Shoulder Milling

Drilling

Chamfer Milling

Drilling: Blind

Profile Milling

Reaming: Through Hole

Shoulder/Slot Milling

Reaming: Blind Hole

Pocketing

kennametal.com/PCD

PCD tools for high-speed aluminium machining, reducing machining time drastically. The extensive tool life of PCD tools provides up to 10 times higher productivity compared to carbide solutions. Various-style PCD end mills, PCD drills, and PCD reamer covering multiple applications, and aluminium machining strategies to drastically shorten cycle times and increase productivity. Ideal for roughing and finishing operations, all tools are minimum quantity lubrification (MQL) ready. The sharp cutting edges and low-friction rake surfaces guarantee high-quality surface finishes.

kennametal.com

Sharp cutting edges.

Low-friction rake surface, reducing build-up edges.

Ultra-wear resistant, long tool life.

Short lead time, through standard PCD tool offering.

MQL ready.

TOOLING TYPES Drills/Reamer

kennametal.com

End Mills

kennametal.com

PCD Tooling

TOOL SELECTION GUIDE • REAMER

Page

B467

R215

R225

R420

Workpiece material Primary

Secondary 6–20mm (.236–.787")

Range

6–18mm (.236–.709")

6–20mm (.236–.787")

IT7

IT6

Cylindricity

10 μm (.0004")

5 μm (.0002")

Position

10 μm (.0004")

7 μm (.0003")

0,6–1,2 μm (20–47 μ-in)

0,1–0,8 μm (4–32 μ-in)

Accuracy

Surface roughness (Ra) Cost / Part

extremely low

Cycle time

extremely low

20–42mm (.787–1.654")

Main Operations

䢇

Primary

嘷

Secondary

Cylindricity NOTE: Process and application-dependent. Highly depending on the premachine hole accuracy. Use of high-performance drilling/premachining tools mandatory to reach values.

Position NOTE: Process and application-dependent. Highly depending on the premachine hole accuracy. Use of high-performance drilling/premachining tools mandatory to reach values. Ra

Surface roughness NOTE: Surface roughness values are guidelines and dependent on application, coolant situation, machine, and cutting data applied.

kennametal.com

PCD Tooling

TOOL SELECTION GUIDE • ENDMILLS ALCB

ALCC

ALCR

ALSB

ALSR

Rougher

䢇

Finisher

䢇

Page Tool type

Main operation Workpiece material Primary

Secondary Corner style 0,2–0,3mm

0,2–0,3mm

0,3mm

0,4mm

—

Cutting diameter [D1]

12–20mm

6–20mm

12–20mm

25–50mm

25–40mm

Maximum cutting depth [Ap1 max]

6–20mm

10–28mm

24–40mm

15mm

32–50mm

Axial Rake Angle

3°

9°–12°

6°

Effective cutting edges [ZU]

Corner radius [R¡] Corner chamfer width [BCH]

Centre cutting

Additional Operations

䢇

Primary

嘷

Secondary

kennametal.com

Solid Carbide Drills

PCD DRILLS • CATALOGUE NUMBERING SYSTEM Each character in our catalogue number signifies a specific trait of that product. Use the following key columns and corresponding images to easily identify which attributes apply.

Solid Carbide Drills

PCD DRILL • B467 • 5 X D • INTERNAL COOLANT 䢇

first choice

嘷

alternate choice P M K N S H

B468A08500SP

D1 6,00 6,50 7,00 7,50 8,00 8 50

L 82 91 91 91 91 103

L3 44 53 53 53 53 61

L4 max 35 43 43 43 43 49

L5 1,0 1,1 1,2 1,3 1,4 14

LS 36 36 36 36 36 40

KD1415

catalogue number B467A06000SP B467A06500SP B467A07000SP B467A07500SP B467A08000SP B467A08500SP

䢇

D 6 8 8 8 8 10

䢇䢇䢇䢇䢇䢇

08500

Style

Drill Series

Length/ Coolant

Shank

Diameter

Point Geometry/ Application

B = Metric K = Inch

46* = PCD Drills

7=3xD 8=5xD 9=8xD

A = Form HA, straight round shank

08500 = 8.5mm 06350 = 1/4" = E = 6.35mm

SP = Sharp Point

PCD REAMERS • CATALOGUE NUMBERING SYSTEM Each character in our catalogue number signifies a specific trait of that product. Use the following key columns and corresponding images to easily identify which attributes apply. Hole Finishing

Hole Finishing

PCD REAMER • R215 • 5 X D • INTERNAL COOLANT first choice

嘷

alternate choice P M K N S H

catalogue number R215A06000H6SFM R215A08000H6SFM R215A10000H6SFM R215A12000H6SFM R215A14000H6SFM R215A16000H6SFM

D1 6,000 8,000 10,000 12,000 14,000 16,000

R225A08500H7HFM

D 6,000 8,000 10,000 12,000 14,000 16,000

L 79,000 92,000 106,000 124,000 135,000 150,000

L4 27,000 40,000 50,000 60,000 70,000 80,000

L10 7,013 6,895 7,023 7,108 7,248 7,248

LS 36,000 36,000 40,000 45,000 45,000 48,000

Z 2 4 4 4 4 4

䢇

KD1415

䢇

䢇䢇䢇䢇䢇䢇

08500

Style

Reamer Series

Coolant

Length

Shank

Diameter

Hole Tolerance

Flute

Metric/ Inch

H7 = Hole Tolerance

HF = Helical Fluted SF = Straight Fluted

R = Reamer

kennametal.com

1 = Solid Carbide 2 = Tipped 3 = Modular 4 = Tipped Expandalbe 5 = Modular Expandable

0 = Without coolant 1 = With central coolant 2 = With radial coolant

4=3xD 5=5xD 6=8xD

A = Form HA, straight round shank

08500 = 8.5mm 06350 = 1/4" = E = 6.35mm

M= Metric

kennametal.com

Solid Carbide Drills

PCD ENDMILLS • CATALOGUE NUMBERING SYSTEM Each character in our catalogue number signifies a specific trait of that product. Use the following key columns and corresponding images to easily identify which attributes apply. Solid Carbide End Mills

Solid Carbide End Mills

PCD END MILL • ALCB • 2 FLUTES • 1 X D • INTERNAL COOLANT first choice

嘷

alternate choice P M K N S H

order number 6752771 6752772 6752773 6752774 6752775 6752776

catalogue number ALCB2RA0600N006HAR020IM ALCB2RA0800N008HAR020IM ALCB2RA1000N010HAR020IM ALCB2RA1200N012HAR030IM ALCB2RA1600N016HAR030IM ALCB2RA20600N020HAR030IM

ALCB2RA0600N006HAR020IM

D1 6,00 8,00 10,00 12,00 16,00 20,00

D 6,00 8,00 10,00 12,00 16,00 20,00

Ap1 max 6,00 8,00 10,00 12,00 16,00 20,00

L 57,00 63,00 76,00 83,00 95,00 108,00

LS 36,00 36,00 40,00 45,00 48,00 50,00

R¡ 0,20 0,20 0,20 0,30 0,30 0,30

ZU 2 2 2 2 2 2

嘷

䢇

KD1410

䢇

䢇䢇䢇䢇䢇䢇

ALCB

0600

006

R020

Series

Number of Flutes

Front End Style

Cutting Diameter D1

Flute Section Style

Length of Cut Ap1 max

Shank Style

Radius

Speciﬁc Features

Standard

ALCB = Basic PCD end mill with carbide body

1 = 1-Flute 2 = 2-Flute 3 = 3-Flute 4 = 4-Flute 5 = 5-Flute 6 = 6-Flute 7 = 7-Flute 8 = 8-Flute 9 = 9-Flute M = Multiflute

SE = Sharp Edge CH = Chamfer RA = Radius BN = Ball Nose TB = Taper Ball Nose TO = Toroidal

N = Neck E = Extended Neck S = Short Without Neck R = Regular Without Neck L = Long Without Neck X = Extra Long Without Neck

Metric = Ap1 Max in mm Inch = Ap1 Max in decimal inch

HA =Plain HB = Weldon® SL = Safe-Lock™ DL = Duo-Lock™

ALCC = Complex PCD end mill carbide body ALCR = Roughing PCD end mill with carbide body

Metric = D1 in mm Inch = D1 in decimal inch

C = Chip Splitter I = Internal Coolant O = Coolant Grooves in Shank P = Polished Flutes

M= Metric Blank = Inch

ALSB = Basic PCD end mill with steel body ALSR = Basic PCD end mill with steel body

Radius Metric R020 R025 R030 R040 R050 R075 R100 R125 R150 R200 R250 R300 R400 R500 R600

kennametal.com

= = = = = = = = = = = = = = =

0,2mm 0,25mm 0,3mm 0,4mm 0,5mm 0,75mm 1,0mm 1,25mm 1,5mm 2,0mm 2,5mm 3,0mm 4,0mm 5,0mm 6,0mm

kennametal.com

Solid Carbide Drills

PCD DRILL • B467 • 5 X D • INTERNAL COOLANT first choice alternate choice P M K N S H

catalogue number B467A06000SP B467A06500SP B467A07000SP B467A07500SP B467A08000SP B467A08500SP B467A09000SP B467A09500SP B467A10000SP B467A10500SP B467A11000SP B467A11500SP B467A12000SP B467A12500SP B467A13000SP B467A13500SP B467A14000SP B467A14500SP B467A15000SP B467A15500SP B467A16000SP B467A16500SP B467A17000SP B467A17500SP B467A18000SP B467A18500SP B467A19000SP B467A19500SP B467A20000SP

D1 6,00 6,50 7,00 7,50 8,00 8,50 9,00 9,50 10,00 10,50 11,00 11,50 12,00 12,50 13,00 13,50 14,00 14,50 15,00 15,50 16,00 16,50 17,00 17,50 18,00 18,50 19,00 19,50 20,00

L 82 91 91 91 91 103 103 103 103 118 118 118 118 124 124 124 124 133 133 133 133 143 143 143 143 153 153 153 153

L3 44 53 53 53 53 61 61 61 61 71 41 41 41 77 77 77 44 83 83 83 83 93 93 93 93 101 101 101 101

L4 max 35 43 43 43 43 49 49 49 49 56 56 56 56 60 60 60 60 63 63 63 63 71 71 71 71 77 77 77 77

L5 1,0 1,1 1,2 1,3 1,4 1,4 1,5 1,6 1,7 1,8 1,9 2,0 2,1 2,1 2,2 2,3 2,4 2,5 2,6 2,6 2,7 2,8 2,9 3,0 3,0 3,1 3,2 3,3 3,4

LS 36 36 36 36 36 40 40 40 40 45 45 45 45 45 45 45 45 48 48 48 48 48 48 48 48 50 50 50 50

D 6 8 8 8 8 10 10 10 10 12 12 12 12 14 14 14 14 16 16 16 16 18 20 20 20 20 20 20 20

䢇

KD1415

䢇嘷

䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇䢇

kennametal.com

Hole Finishing

PCD REAMER • R215 • 5 X D • INTERNAL COOLANT 䢇

first choice

嘷

alternate choice

catalogue number R215A06000H6SFM R215A08000H6SFM R215A10000H6SFM R215A12000H6SFM R215A14000H6SFM R215A16000H6SFM R215A18000H6SFM

D1 6,000 8,000 10,000 12,000 14,000 16,000 18,000

D 6,000 8,000 10,000 12,000 14,000 16,000 18,000

L 79,000 92,000 106,000 124,000 135,000 150,000 160,000

L4 27,000 40,000 50,000 60,000 70,000 80,000 90,000

L10 7,013 6,895 7,023 7,108 7,248 7,248 7,249

LS 36,000 36,000 40,000 45,000 45,000 48,000 48,000

䢇

KD1415

P M K N S H

Z 2 4 4 4 4 4 4

䢇䢇䢇䢇䢇䢇䢇

PCD REAMER • R225 • 5 X D • INTERNAL COOLANT first choice

嘷

alternate choice P M K N S H

catalogue number R225A06000H6SFM R225A08000H6SFM R225A10000H6SFM R225A12000H6SFM R225A14000H6SFM R225A16000H6SFM R225A18000H6SFM R225A20000H6SFM

D1 6,000 8,000 10,000 12,000 14,000 16,000 18,000 20,000

D 6,000 8,000 10,000 12,000 14,000 16,000 18,000 20,000

L 79,000 92,000 106,000 124,000 135,000 105,000 160,000 163,000

L4 27,000 40,000 50,000 60,000 70,000 80,000 90,000 90,000

L10 6,888 3,553 7,023 7,108 7,248 7,248 7,249 7,249

LS 36,000 36,000 40,000 45,000 45,000 48,000 48,000 50,000

Z 2 4 4 4 4 4 4 4

䢇

KD1415

䢇

䢇䢇䢇䢇䢇䢇䢇䢇

kennametal.com

Modular Reaming Bodies

PCD MODULAR REAMER • R420 • INTERNAL COOLANT 䢇

first choice

嘷

alternate choice

catalogue number R420M20000H6SFM R420M22000H6SFM R420M25000H6SFM R420M28000H6SFM R420M30000H6SFM R420M32000H6SFM R420M36000H6SFM R420M40000H6SFM R420M42000H6SFM

D1 20,000 22,000 25,000 28,000 30,000 32,000 36,000 40,000 42,000

D 17,500 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000

L1 15,500 15,500 16,500 16,500 16,500 16,500 18,000 18,000 18,000

CSMS system size KST175 KST200 KST200 KST200 KST200 KST200 KST200 KST200 KST200

L10 7,463 7,500 7,463 7,463 7,463 7,500 7,500 7,463 7,500

䢇

KD1415

P M K N S H

Z 4 4 4 6 6 6 6 6 6

䢇䢇䢇䢇䢇䢇䢇䢇䢇

STRAIGHT SHANK BODIES 3 X D • AXIAL CLAMPING

order number 4056174 4056175 4056176 3861185 3861186 3861187 3861188 3861189

CSWS system size KST115 KST135 KST155 KST175 KST200 KST250 KST300 KST350

catalogue number SS16KST115AR3M SS20KST135AR3M SS20KST155AR3M SS20KST175AR3M SS20KST200AR3M SS25KST250AR3M SS32KST300AR3M SS32KST350AR3M

D1 14,00 16,00 18,00 20,00 22,50 27,50 32,50 37,50

D1 max 15,999 17,999 19,999 22,499 27,499 32,499 37,499 42,000

D 16,00 20,00 20,00 20,00 20,00 25,00 32,00 32,00

L 91,00 99,00 106,00 113,50 130,50 152,50 174,00 190,00

L2 35,00 39,00 45,00 51,50 65,50 80,50 94,00 108,00

LS 48,00 51,00 51,00 51,00 51,00 56,00 61,00 61,00

L2 67,00 75,00 85,00 96,50 120,50 145,50 169,00 192,00

LS 48,00 51,00 51,00 51,00 51,00 56,00 61,00 61,00

STRAIGHT SHANK BODIES 5 X D • AXIAL CLAMPING

order number 4056177 4056178 4056179 3861190 3861191 3861192 3861193 3861194

CSWS system size KST115 KST135 KST155 KST175 KST200 KST250 KST300 KST350

catalogue number SS16KST115AR5M SS20KST135AR5M SS20KST155AR5M SS20KST175AR5M SS20KST200AR5M SS25KST250AR5M SS32KST300AR5M SS32KST350AR5M

D1 14,00 16,00 18,00 20,00 22,50 27,50 32,50 37,50

D1 max 15,999 17,999 19,999 22,499 27,499 32,499 37,499 42,000

D 16,00 20,00 20,00 20,00 20,00 25,00 32,00 32,00

L 123,00 135,00 146,00 158,50 185,50 217,50 249,00 274,00

kennametal.com

Modular Reaming Bodies

STRAIGHT SHANK BODIES 3 X D • RADIAL CLAMPING

order number 3861195 3861196 3861197 3861198 3861199

CSWS system size KST175 KST200 KST250 KST300 KST350

catalogue number SS20KST175RR3M SS20KST200RR3M SS25KST250RR3M SS32KST300RR3M SS32KST350RR3M

D1 20,00 22,50 27,50 32,50 37,50

D1 max 22,499 27,499 32,499 37,499 42,000

D 20,00 20,00 25,00 32,00 32,00

L 113,50 130,50 152,50 174,00 190,00

L2 51,50 65,50 80,50 94,00 108,00

LS 51,00 51,00 56,00 61,00 61,00

L2 96,50 120,50 145,50 169,00 192,00

LS 51,00 51,00 56,00 61,00 61,00

STRAIGHT SHANK BODIES 5 X D • RADIAL CLAMPING

order number 3861200 3861201 3861202 3861203 3861204

CSWS system size KST175 KST200 KST250 KST300 KST350

catalogue number SS20KST175RR5M SS20KST200RR5M SS25KST250RR5M SS32KST300RR5M SS32KST350RR5M

D1 20,00 22,50 27,50 32,50 37,50

D1 max 22,499 27,499 32,499 37,499 42,000

D 20,00 20,00 25,00 32,00 32,00

L 158,50 185,50 217,50 249,00 274,00

kennametal.com

Holemaking

PCD DRILL • APPLICATION DATA

Material Group 1 2 N 3 4

min 150 150 150 100

Cutting Speed — vc

Metric

Range — m/min

Recommended Feed Rate (f) by Diameter

Starting Value 300 250 150 170

max 600 500 400 250

mm/r mm/r mm/r mm/r

6,0 0,10–0,18 0,12–0,20 0,10–0,18 0,10–0,18

8,0 0,12–0,20 0,14–0,22 0,12–0,20 0,12–0,20

10,0 0,14–0,22 0,16–0,24 0,14–0,22 0,14–0,22

12,0 0,16–0,24 0,18–0,26 0,16–0,24 0,16–0,24

16,0 0,18–0,26 0,20–0,28 0,18–0,26 0,18–0,26

20,0 0,20–0,28 0,22–0,30 0,20–0,28 0,20–0,28

PCD REAMER • APPLICATION DATA

Material Group 1 2 N 3 4

kennametal.com

min 150 150 150 100

Cutting Speed — vc

Metric

Range — m/min

Recommended feed per tooth (fz = mm/th)

Starting Value 350 450 400 250

max 650 600 550 350

mm/r mm/r mm/r mm/r

> = 5,0 0,06–0,16 0,06–0,16 0,05–0,16 0,05–0,16

> = 10,0 0,08–0,20 0,06–0,20 0,05–0,20 0,05–0,20

> = 16,0 0,10–0,25 0,08–0,25 0,05–0,25 0,05–0,25

> = 25,0 0,12 –0,28 0,08–0,28 0,06–0,28 0,06–0,28

> = 32,0 0,12–0,30 0,08–0,30 0,06–0,30 0,06–0,30

> = 50,0 0,12–0,30 0,10–0,30 0,08–0,30 0,08–0,30

> = 70,0 0,12–0,30 0,10–0,30 0,08–0,30 0,08–0,30

max. 100,0 0,12–0,30 0,10–0,30 0,08–0,30 0,08–0,30

kennametal.com

Solid Carbide End Mills

PCD END MILL • ALCB • 2 FLUTES • 1 X D • INTERNAL COOLANT first choice alternate choice P M K N S H

order number 6752771 6752772 6752773 6752774 6752775 6752776

catalogue number ALCB2RA0600N006HAR020IM ALCB2RA0800N008HAR020IM ALCB2RA1000N010HAR020IM ALCB2RA1200N012HAR030IM ALCB2RA1600N016HAR030IM ALCB2RA20600N020HAR030IM

D1 6,00 8,00 10,00 12,00 16,00 20,00

D 6,00 8,00 10,00 12,00 16,00 20,00

Ap1 max 6,00 8,00 10,00 12,00 16,00 20,00

L 57,00 63,00 76,00 83,00 95,00 108,00

LS 36,00 36,00 40,00 45,00 48,00 50,00

R¡ 0,20 0,20 0,20 0,30 0,30 0,30

ZU 2 2 2 2 2 2

䢇

KD1410

䢇嘷

䢇䢇䢇䢇䢇䢇

PCD END MILL • ALCC • 2 FLUTES • 1,5 X D • INTERNAL COOLANT first choice

嘷

alternate choice P M K N S H

order number 6752777 6752778 6752779 6752780 6752791 6752792

catalogue number ALCC2RA0600N010HAR020IM ALCC2RA0800N015HAR020IM ALCC2RA1000N015HAR020IM ALCC2RA1200N020HAR030IM ALCC2RA1600N025HAR030IM ALCC2RA20600N028HAR030IM

D1 6,00 8,00 10,00 12,00 16,00 20,00

D 6,00 8,00 10,00 12,00 16,00 20,00

Ap1 max 10,00 15,00 15,00 20,00 25,00 28,00

L 57,00 63,00 76,00 83,00 95,00 108,00

LS 36,00 36,00 40,00 45,00 48,00 50,00

R¡ 0,20 0,20 0,20 0,30 0,30 0,30

ZU 2 2 2 2 2 2

䢇

KD1410

䢇

䢇䢇䢇䢇䢇䢇

PCD HELICAL END MILL • ALCR • 2 FLUTES • 2 X D • INTERNAL COOLANT first choice alternate choice P M K N S H

order number 6752793 6752794 6752795

catalogue number ALCR2RA1200N024HAR030IM ALCR2RA1600N032HAR030IM ALCR2RA2000N040HAR030IM

D1 12,00 16,00 20,00

D 12,00 16,00 20,00

Ap1 max 24,00 32,00 40,00

L 83,00 95,00 108,00

LS 45,00 48,00 50,00

R¡ 0,30 0,30 0,30

ZU 2 2 2

䢇

KD1410

䢇嘷

䢇䢇䢇

kennametal.com

Shoulder Mills

PCD END MILL • ALSB • 4-5 FLUTES • 1,25 X D • INTERNAL COOLANT first choice alternate choice P M K N S H

order number 6752796 6752797 6752798 6752799

catalogue number ALSB4RA2500N015HAR040IM ALSB4RA3200N015HAR040IM ALSB4RA4000N015HAR040IM ALSB5RA5000N015HAR040IM

D1 25,00 32,00 40,00 50,00

D 25,00 32,00 32,00 32,00

Ap1 max 15,00 15,00 15,00 15,00

L 100,00 100,00 100,00 100,00

LS 56,00 60,00 60,00 60,00

R¡ 0,40 0,40 0,40 0,40

ZU 4 4 4 5

䢇

KD1410

䢇嘷

䢇䢇䢇䢇

PCD HELICAL END MILL • ALSR • 2-3 FLUTES • 1,25 X D • INTERNAL COOLANT first choice alternate choice P M K N S H

order number 6752800 6752811 6752812

catalogue number ALSR2RA2500N032HAR040IM ALSR2RA3200N040HAR040IM ALSR2RA4000N050HAR040IM

D1 25,00 32,00 40,00

D 25,00 32,00 32,00

Ap1 max 32,00 40,00 40,00

L 115,00 125,00 125,00

LS 56,00 60,00 60,00

R¡ 0,40 0,40 0,40

ZU 2 2 3

䢇

KD1410

䢇嘷

䢇䢇䢇

kennametal.com

Holemaking

PCD END MILL • ALCB • APPLICATION DATA

Side Milling (A) and Slotting (B) A Material Group 1 2 3 4 N 5 6 7

ap 1xD 1xD 1xD 1xD 1xD 1xD 1xD

Cutting Speed — vc m/min

B ae 0,25 x D 0,25 x D 0,25 x D 0,25 x D 0,25 x D 0,25 x D 0,25 x D

Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.

KD1410

ap 0.5 x D 0.5 x D 0.5 x D 0.5 x D 0.5 x D 0.5 x D 0.5 x D

min 200 200 180 200 200 150 250

– – – – – – –

D1 — Diameter max 3000 3000 1400 800 1000 800 500

6 6,0 0,070 0,070 0,060 0,060 0,050 0,040 0,040

mm Fz Fz Fz Fz Fz Fz Fz

8 8,0 0,080 0,080 0,070 0,070 0,060 0,050 0,050

10 10,0 0,090 0,090 0,080 0,080 0,070 0,060 0,060

12 12,0 0,140 0,140 0,120 0,100 0,090 0,060 0,060

16 16,0 0,160 0,160 0,140 0,120 0,100 0,080 0,080

20 20,0 0,160 0,160 0,140 0,120 0,100 0,080 0,080

PCD END MILL • ALCC • APPLICATION DATA

Side Milling (A) and Slotting (B) A Material Group 1 2 3 4 N 5 6 7

ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D

Cutting Speed — vc m/min

B ae 0,15 x D 0,15 x D 0,15 x D 0,15 x D 0,15 x D 0,15 x D 0,15 x D

Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.

KD1410

ap 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D

min 200 200 180 200 200 150 250

– – – – – – –

D1 — Diameter max 3000 3000 1400 800 1000 800 500

6 6,0 0,070 0,070 0,060 0,060 0,050 0,040 0,040

mm Fz Fz Fz Fz Fz Fz Fz

8 8,0 0,080 0,080 0,070 0,070 0,060 0,050 0,050

10 10,0 0,090 0,090 0,080 0,080 0,070 0,060 0,060

12 12,0 0,140 0,140 0,120 0,100 0,090 0,060 0,060

16 16,0 0,160 0,160 0,140 0,120 0,100 0,080 0,080

PCD HELICAL END MILL • ALCR • APPLICATION DATA

Side Milling (A) and Slotting (B) A Material Group 1 2 3 4 N 5 6 7

ap 2xD 2xD 2xD 2xD 2xD 2xD 2xD

kennametal.com

Cutting Speed — vc m/min

B ae 0,2 x D 0,2 x D 0,2 x D 0,2 x D 0,2 x D 0,2 x D 0,2 x D

Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.

KD1410

ap 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D

min 200 200 180 200 200 150 250

– – – – – – –

D1 — Diameter max 3000 3000 1400 800 1000 800 500

mm Fz Fz Fz Fz Fz Fz Fz

12 12,0 0,140 0,140 0,120 0,100 0,090 0,060 0,060

16 16,0 0,160 0,160 0,140 0,120 0,100 0,080 0,080

20 20,0 0,160 0,160 0,140 0,120 0,100 0,080 0,080

kennametal.com

Holemaking

PCD END MILL • ALSB • APPLICATION DATA

Side Milling (A) and Slotting (B) A Material Group 1 2 3 4 N 5 6 7

ap L10 L10 L10 L10 L10 L10 L10

Cutting Speed — vc m/min

B ae 0,25 x D 0,25 x D 0,25 x D 0,25 x D 0,25 x D 0,25 x D 0,25 x D

Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.

KD1410

ap 0,5*L10 0,5*L10 0,5*L10 0,5*L10 0,5*L10 0,5*L10 0,5*L10

min 200 200 180 200 200 150 250

– – – – – – –

D1 — Diameter max 3000 3000 1400 800 1000 800 500

25 25,0 0,180 0,180 0,160 0,140 0,120 0,100 0,100

mm Fz Fz Fz Fz Fz Fz Fz

32 32,0 0,200 0,200 0,180 0,160 0,120 0,100 0,100

32 40,0 0,200 0,200 0,180 0,160 0,120 0,100 0,100

50 50,0 0,220 0,220 0,200 0,180 0,140 0,120 0,120

PCD HELICAL END MILL • ALSR • APPLICATION DATA

Side Milling (A) and Slotting (B) A Material Group 1 2 3 4 N 5 6 7

ap 1,25 x D 1,25 x D 1,25 x D 1,25 x D 1,25 x D 1,25 x D 1,25 x D

kennametal.com

Cutting Speed — vc m/min

B ae 0,2 x D 0,2 x D 0,2 x D 0,2 x D 0,2 x D 0,2 x D 0,2 x D

Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.

KD1410

ap 0,25 x D 0,25 x D 0,25 x D 0,25 x D 0,25 x D 0,25 x D 0,25 x D

min 200 200 180 200 200 150 250

– – – – – – –

D1 — Diameter max 3000 3000 1400 800 1000 800 500

mm Fz Fz Fz Fz Fz Fz Fz

25 25,0 0,180 0,180 0,160 0,140 0,120 0,100 0,100

32 32,0 0,200 0,200 0,180 0,160 0,120 0,100 0,100

32 40,0 0,200 0,200 0,180 0,160 0,120 0,100 0,100

kennametal.com

3 1

Search for what you need 1

Watch videos

Share with others

3 1 2

Check out our new catalogue app. Available in the Google Play™ Store or the App Store®

kennametal.com

Grades and Grade Descriptions

HOLEMAKING wear resistance

Coating

Grade Description

toughness

KCK10A

Multilayered PVD AlTiN-based coated submicron grain carbide with superior surface finish. First choice for cast iron. This grade utilizes a newly developed coating combined with a state-of-the-art surface condition to offer extraordinary wear resistance in abrasive materials at elevated cutting conditions with improved performance consistency.

SOLID END MILLING wear resistance

KCSM15

KCPM15

Coating

Grade Description

toughness 15

Coated carbide grade with thick PVD coating and optimised chemistry and process for increased wear resistance. Outstanding protection in milling stainless steel to mitigate crater, DOCN (depth-of-cut notching), and flank wear. Excellent performance up to 52 HRC.

S H

PCD TOOLING wear resistance

KD1410

Coating

kennametal.com

Grade Description

A PCD-tip brazed to carbide for machining aluminium with a very high silicon content, abrasive non-ferrous materials, and fibre-reinforced plastics. KD1410 can be used at very high cutting speeds, even where good surface finishes are required. This grade can be used both wet or dry but is suggested to use coolant where good surface finishes are required.

toughness 15

kennametal.com

General Information

KEY TO PRODUCT TABLE COLUMN HEADINGS

Short-Name Code Ap1 max BCH BS CE CSMS CSWS D D D1 D1 D1 D1 D1 D1 max D1 max D2 D3 hm kg L L1 L1 L1 L10 L10 L2 L3 L3 L4 L4 max L5 lbs LI LS R R¡ Torque (ft. lbs.) Nm Z ZU

kennametal.com

You may notice a slight change in the appearance of our product tables and specification charts. In this catalogue, Kennametal introduces a set of short-name codes to improve the readability of tables and drawings. These codes replace full-text descriptions. The full list of codes and their definitions can be found below.

Full Text Description

Maximum Cutting Depth Corner Chamfer Width Corner Facet Length Cutting Edges Connection Style Machine Side Connection Style Workpiece Side Insert: Insert IC Size Toolholder: Shank/Bore Diameter Holemaking: Drill Diameter Holemaking: Reamer Diameter Insert: Insert Hole Size Milling: Cutter Diameter Toolholder: Clamping Diameter Toolholder: Maximum Shank/Bore Diameter Maximum Drill Diameter Body Diameter 1 Workpiece Side Neck Diameter Average Chip Thickness Weight Kilograms Overall Length Holemaking: Reamer Gage Length Holemaking: Tool Length Toolholder: Gage Length Insert Cutting Edge Length Holemaking: Reamer Cut Edge Length Usable Length Drill Flute Length Milling: Maximum Depth Holemaking: Reamer Maximum Depth Maximum Drill Depth Drill Point Length Weight Pounds Insert Length Shank Length Profile or Ball Nose Radii Corner Radius Torque Foot Pounds Torque Newton Meters Number of Flutes Number of Flutes

kennametal.com

Material Cross Reference • DIN

P M K

Steel Stainless Steel Cast Iron

material group

Material Cross Reference • DIN

N S

description

Non-Ferrous High-Temp Alloys

H C

Hardened Materials CFRP Materials

content

tensile strength RM (MPa)*

hardness (HB)

hardness (HRC)

material number

Low-Carbon Steels, Long Chipping

C <0,25%

<530

<125

–

Low-Carbon Steels, Short Chipping, Free Machining

C <0,25%

<530

<125

–

C15, Ck22, ST37-2, S235JR, 9SMnPb28, GS38

Medium- and High-Carbon Steels

C >0,25%

>530

<220

<25

ST52, S355JR, C35, GS60, Cf53

Alloy Steels and Tool Steels

C >0,25%

600–850

<330

<35

16MnCr5, Ck45, 21CrMoV5-7, 38SMn28

Alloy Steels and Tool Steels

C >0,25%

850–1400

340–450

35–48

100Cr6, 30CrNiMo8, 42CrMo4, C70W2, S6525, X120Mn12

Ferritic, Martensitic, and PH Stainless Steels

–

600–900

<330

<35

100Cr6, 30CrNiMo8, 42CrMo4, C70W2, S6525, X120Mn12

High-Strength Ferritic, Martensitic, and PH Stainless Steels

–

900–1350

350–450

35–48

X102CrMo17, G-X120Cr29

Austenitic Stainless Steel

–

<600

130–200

–

X5CrNi 18 10, X2CrNiMo 17 13 2, G-X25CrNiSi18 9, X15CrNiSi 20 12

High-Strength Austenitic Stainless and Cast Stainless Steels

–

600–800

150–230

<25

X2CrNiMo 13 4, X5NiCr 32 21, X5CrNiNb 18 10, G-X15CrNi 25-20

Duplex Stainless Steel

–

<800

135–275

<30

X8CrNiMo27 5, X2CrNiMoN22 5 3, X20CrNiSi25 4, G-X40CrNiSi27 4

Grey Cast Iron

–

125–500

120–290

<32

GG15, GG25, GG30, GG40, GTW40

Low- and Medium-Strength Ductile Irons (Nodular Irons) and Compacted Graphite Irons (CGI)

–

<600

130–260

<28

GGG40, GTS35

High-Strength Ductile Irons and Austempered Ductile Iron (ADI)

–

>600

180–350

<43

GGG60, GTW55, GTS65

Wrought Aluminium

–

AIMg1, AI99.5, AICuMg1, AICuBiPb, AIMgSi1, ALMgSiPb

Low-Silicon Aluminium Alloys and Magnesium Alloys

Si <12,2%

–

GAISiCu4, GDAISi10Mg

High-Silicon Aluminium Alloys and Magnesium Alloys

Si >12,2%

–

G-ALSi12, G-AlSi17Cu4, G-AISi21CuNiMg

Copper-, Brass-, Zinc-Based on Machinability Index Range of 70–100

–

CuZn40, Ms60, G-CuSn5ZnPb, CuZn37, CuSi3Mn

Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass

–

LEXAN®, Hostalen™, Polystyrol®, MAKROLON®

Carbon, Graphite Composites, CFRP

–

CFK, GFK

Metal Matrix Composites (MMC)

–

Iron-Based, Heat-Resistant Alloys

–

500–1200

160–260

25–48

X1NiCrMoCu32 28 7, X12NiCrSi36 16, X5NiCrAITi31 20, X40CoCrNi20 20

Cobalt-Based, Heat-Resistant Alloys

–

1000–1450

250–450

25–48

Haynes® 188, Stellite® 6,21,31

Nickel-Based, Heat-Resistant Alloys

–

600–1700

160–450

<48

INCONEL® 690, INCONEL 625, Hastelloy®, NIMONIC® 75

Titanium and Titanium Alloys

–

900–1600

300–400

33–48

Ti1, TiAI5Sn2, TiAI6V4, TiAI4Mo4Sn2

Hardened Materials

–

44–48

GX260NiCr42, GX330NiCr42, GX300CrNiSi952, GX300CrMo153, Hardox® 400

Hardened Materials

–

48–55

–

Hardened Materials

–

56–60

–

Hardened Materials

–

>60

–

CFRP, CFRP/CFRP

–

CFRP/Non-Ferrous

–

CFRP/High Temp

–

CFRP/Stainless Steel

–

CFRP/Non-Ferrous/High-Temp

–

kennametal.com

NOTES

kennametal.com

Digitally access and leverage product data and knowledge to connect systems and processes throughout the entire manufacturing lifecycle. VISIT KENNAMETAL.COM/NOVO AND DOWNLOAD TODAY.

kennametal.com

METALCUTTING SAFETY IMPORTANT SAFETY INSTRUCTIONS Read before using the tools in this catalogue! Projectile and Fragmentation Hazards:

Breathing and Skin Contact Hazards:

Modern metalcutting operations involve high spindle and cutter speeds and high temperatures and cutting forces. Hot metal chips may ﬂy off the workpiece during metalcutting. Although cutting tools are designed and manufactured to withstand high cutting forces and temperatures, they can sometimes fragment, particularly if they are subjected to over-stress, severe impact, or other abuse.

Grinding carbide or other advanced cutting tool materials produces dust or mist containing metallic particles. Breathing this dust or mist — especially over an extended period — can cause temporary or permanent lung disease or make existing medical conditions worse. Contact with this dust or mist can irritate eyes, skin, and mucous membranes and may make existing skin conditions worse.

To avoid injury:

• Always wear appropriate personal protective equipment, including safety goggles, when operating metalcutting machines or working nearby.

• Always wear breathing protection and safety goggles when grinding.

• Always make sure all machine guards are in place.

• Provide ventilation control and collect and properly dispose of dust, mist, or sludge from grinding. • Avoid skin contact with dust or mist.

For more information, read the applicable Material Safety Data Sheet provided by Kennametal and consult General Industry Safety and Health Regulations, Part 1910, Title 29 of the Code of Federal Regulations. These safety instructions are general guidelines. Many variables affect machining operations. It is impossible to cover every specific situation. The technical information included in this catalogue and recommendations on machining practices may not apply to your particular operation. For more information, consult the Kennametal Metalcutting Safety booklet, available free from Kennametal at 724 539 5747 or fax 724 539 5439. For specific product safety and environmental questions, contact our Corporate Environmental Health and Safety Office at 724 539 5066 or fax 724 539 5372.

Kennametal, the stylised K, GOdrill, HARVI, Kenna Universal, NOVO, Stellite, and Y-Tech are trademarks of Kennametal, Inc. and are used as such herein. The absence of a product, service name, or logo from this list does not constitute a waiver of the Kennametal trademark or other intellectual property rights concerning that name or logo. Android ™ is a trademark of Google Inc. App Store ® is a registered trademark of Apple Inc., registered in the U.S. and other countries. DUO-hOCK ® is a registered trademark and Duo-Lock ™ is a trademark of Haimer GmbH. Google Play ™ is a trademark of Google Inc. Hardox ® is a registered trademark of SSAB Technology AB. Hastelloy ® and Haynes ® are registered trademarks of Haynes International, Inc. Hostalen™ is a trademark of Hoechst GmbH. INCONEL ® and NIMONIC ® are registered trademarks of Huntington Alloys Corporation. INVAR ® is a registered trademark of Aperam Alloys Imphy. LEXAN ® is a registered trademark of Sabic Global Technologies B.V. MAKROLON ® is a registered trademark of Covestro Deutschland AG. Polystyrol ® is a registered trademark of BASF SE. SAFE-hOCK ® is a registered trademark and Safe-Lock ™ is a trademark of Haimer GmbH. Weldon ® is a registered trademark of Dauphin Precision Tool, LLC. ©2020 Kennametal Inc. All rights reserved.

kennametal.com

INNOVATIONS WORLD HE ADQUA RTERS

Kennametal Inc. 525 William Penn Place l Suite 3300 Pittsburgh, PA 15219 USA Tel: 1 800 446 7738 ftmill.service@kennametal.com EUROPE A N HE ADQUA RTERS

Kennametal Europe GmbH Rheingoldstrasse 50 CH 8212 Neuhausen am Rheinfall Switzerland Tel: +41 52 6750 100 neuhausen.info@kennametal.com ASIA-PACIFIC HE ADQUARTERS

Kennametal Singapore Pte. Ltd. 3A International Business Park Unit #01-02/03/05, ICON@IBP Singapore 609935 Tel: +65 6265 9222 k-sg.sales@kennametal.com INDIA HE ADQUA RTERS

Kennametal India Limited CIN: L27109KA1964PLC001546 8/9th Mile, Tumkur Road Bangalore - 560 073 Tel: +91 080 22198444 or +91 080 43281444 bangalore.information@kennametal.com

Kennametal Innovations 02 Metric

Articles inside

Grades and Grade Descriptions

Key to Column Headings