Crank Tools 04A5 Contains 14x15mm sockets & 7x8mm hex keys for crank bolt and crank arm removal. Patented interchangeable adaptor fits both square & hollow axles. Handle extendable to 270mm for extra leverage. Patented.
04A5
Crank Tools 01
Cable Tools 07
Disc Brake Tools 01
Chain Tools 08
Hex and Star Wrenches 02
Spoke Tools 09
Pedal and Axle Wrenches 03
Tire Service 10
Wrenches 03
Cleaning & Lubrication 11
Cone Wrenches 04
Air Pumps 12
Headset Wrenches 04
Accessories 13
Freewheel 05
Multi Tools 14
Cassette Tools 05
Tool Kits 15
Bottom Bracket Tools 06
Display & Storage 16-17
Safety 06
Impact Tools for Assembly Line 18
Frame & Fork Tools 07
Xpert Series – Tools for Specialists 19-25
04C2 Crank remover, with patented interchangeable adaptor fits both square & hollow axles. For use with 8mm hex key wrench. Patented. 04C2
04D2
04S1
27P3
04D2 Contains 14x15mm sockets & 8mm hex key for crank bolt and crank arm removal. Patented interchangeable adaptor fits both square & hollow axles. Patented. 04S1 Crank tool with ergonomic handle. Contains 14x15mm sockets & 8mm hex key for crank bolt and crank arm removal. Patented interchangeable adaptor fits both square & hollow axles. Patented. 04T1 Crank arm/cap installation tool. For Shimano® Hollowtech® II.
04T1
Disc Brake Tools
27P3 Professional tool for chainwheel bolt installation, Cr-V steel. No more busted knuckles while servicing your chainrings.
54A1 Hydraulic hose cutter for stainless steel braided and Kevlar hose. Flawlessly cuts hose and prevents inner tube from deforming. Contains one spare blade.
54A1 54P1
54P1 Needle driver. The needle can be inserted straight into the hose easily. Patented. 54R1 Bleed kit. Universal design for all hydraulic disc brake systems.
Contents
Third party product names used herein are used to identify such products and are for descriptive purposes only. Such names may be marks and/or registered marks of their respective owners.
55A1 Disc rotor truing tool, scales to 2.5mm. 54R1
55A1
01
Pedal and Axle Wrenches 33S1 15mm pedal wrench, off-set design, with ergonomic handle. Cr-Mo steel.
Hex and Star Wrenches
33P5 15mm & 9/16” pedal wrench, Cr-Mo steel, length: 290mm.
33S1
35V8
35VA
34H2 15mm pedal wrench, and 8x10mm hex keys for crankarm bolts and freehubs, Cr-Mo steel.
34A2
35V8 8mm hex key wrench with coating, Cr-V steel.
34S2 Lockring tool, freewheel turner (chain whip, 1/2” x 1/8”), and 15mm pedal wrench, Cr-Mo steel. Perfect tool for fixed-gear bikes.
34H2
35VA 10mm hex key wrench with coating, Cr-V steel. 36H1 Quartet Wrench, 4x5+6x8mm flex-key wrenches, Cr-V steel.
34S4 Lockring tool, freewheel turner (chain whip, 1/2" x 3/32"), and 15mm pedal wrench, Cr-Mo steel.
36Q1
36H1
34S2
36Q1 2x2.5x3x4x5x6x8mm hex key wrenches, 4x5x6mm ball-ended, Cr-V steel.
34T2 Perfect all-in-one tool for track bikes. 10mm open-ended, 5x6mm hex keys, 15mm pedal wrench & 15mm socket for axle nuts. Patented.
34S4
70Y2 4x5x6mm hex key wrenches, Kraton grip. 70Y4 4x5x6mm hex key wrench ball-ended, Kraton grip.
Wrenches
34T2
70T2 T25xT30xT40 star key wrench, Kraton grip. 74A1 6-in-1 3x4+5x6mm hex keys, +/_ screwdrivers. Patented.
34A2 10mm open-ended, 15mm pedal wrench & 14x15mm sockets for crankarm bolts and axle nuts, Cr-Mo steel.
33P5
70Y2
70Y4
25H6 6” adjustable wrench with scales to 1mm, forged.
74B1 Perfect tool for in-line skate, contains bearing pusher, 4x6mm hex keys, +/_ screwdrivers. Patented.
39B8 8~15mm dual wrench set in a storage pouch. The pouch includes two holes to hang during use of wrenches.
25H6
7M85 TwinHead Wrench set, contains 2x2.5x3x4x5x6x8mm hex key wrenches (ball-ended) and T-25 star wrench, SNCM steel.
70T2
39B8
41B8
4108-4115 Combination ratchet wrenches, 8~15mm, 5-degree ratcheting, Cr-V steel. 8mm: #4108 / 15mm: #4115. 60A2 8x9x10mm sockets, with comfortable Kraton grip.
7M85
02
41B8 8~15mm combination ratchet wrench set in a storage pouch. The pouch includes two holes to hang during use of wrenches.
74A1
74B1 4108-4115
60A2
03
Freewheel
Cone Wrenches
0903 For Suntour® compatible 2-notch freewheels, Cr-V steel. For use with 1/2” driver (#53D4) or 21mm spanner.
0502 13x15+14x16mm cone wrench set, set of 2 pieces.
09B3 For Shimano® MF compatible freewheels & Campagnolo® cassettes & splined 12-tooth bottom bracket cups found on the square type spindle systems. For use with 1/2" driver (#53D4) or 21mm spanner.
37A1-37C1 Cone wrenches, Cr-Mo steel. 37A1: 13x14mm 37B1: 15x16mm 37C1: 17x18mm 4713-4719 Cone wrench, 13mm (#4713) to 19mm (#4719), Cr-Mo steel, length: 200mm.
0502
37A1-37C1
09C1 For Shimano® CS compatible cassettes and Center Lock disc brakes, Cr-V steel. The guide pin prevents the tool from slipping out of the spline of the cassette lockring. For use with 1/2” driver (#53D4) or 21mm spanner.
4713-4719 0903
09B3
09C1
09C3
4720-4725 Cone wrench, 20mm (#4720) to 25mm (#4725), Cr-Mo steel, length: 230mm.
09C3 For Shimano® CS compatible cassettes and Center Lock disc brakes, Cr-V steel. For use with 1/2” driver (#53D4) or 21mm spanner.
47X3 13+15+17mm cone wrench set. 47X7 13~19mm cone wrench set.
09D1 For 2-notch single speed freewheels, Cr-Mo steel. For use with 24mm spanner (#4724).
4720-4725
09E1 For 4-notch BMX freewheels, Cr-Mo steel. For use with 24mm spanner (#4724).
47X3 09D1
09E1
09F3
09M3
09S3
09F3 For Suntour® compatible 4-notch freewheels, Cr-V steel. For use with 1/2” driver (#53D4) or 21mm spanner. 09M3 For Miche® compatible cassettes, Cr-V steel. For use with 1/2” driver (#53D4) or 21mm spanner. 09S3 For Shimano® Saint compatible Center Lock disc brakes, Cr-Mo steel. For use with 1/2” driver (#53D4) or 24mm spanner (#4724).
47X7
Headset Wrenches 53D4
06F2 32mm headset wrench, Cr-Mo steel.
Cassette Tools 53D4 1/2” drive wrench, with quick release function.
06F6 36mm headset wrench, Cr-Mo steel.
04
06H8 30x32+36x40mm 4-in-1 headset wrench, Cr-Mo steel.
53S1 Freewheel turner (chain whip, 1/2” x 1/8”) with ergonomic handle, for single-speed. 06F2 / 06F6
53S3 Freewheel turner (chain whip, 1/2” x 3/32”) with ergonomic handle, for multi-speed.
06H8 53S1 53S3
05
Frame & Fork Tools
Bottom Bracket Tools
16A2 H.S.S. bladed cutter to use on Ti/Alu/Cr-Mo/Carbon steel, up to 1-1/8” (28mm). Not recommended for Threaded tubes or Carbon Fiber tubes. Contains one spare H.S.S. blade.
M091 For Campagnolo® Ultra-torque / Shimano® Hollowtech II / Truvativ® Howitzer compatible crank adaptor, Cr-Mo steel. For use with 1/2” driver (#53D4) or 32mm headset wrench (#06F2). M093 BB tool, for Shimano® BBR60 crank adaptor. Cr-Mo steel. For use with 1/2” driver (#53D4). 09B3 For Campagnolo cassettes (all) and BBs (Record, Chorus, and Athena), Cr-V steel. For use with 1/2" driver (#53D4) or 21mm spanner. ®
M091
M093
09B3
11A0
16A2
16A4
16B1
11A0 Adjustable BB cup tool, pins made of Cr-Mo steel.
16A2S Spare H.S.S. blade for #16Ax series tube cutters.
11B1 For Shimano® / ISIS Drive® compatible cartridge BBs with 20 tooth in the ring, CNC engineered, Cr-Mo steel. For use with 1/2” air driver or ratchet wrench. 11B3 For Shimano® / ISIS Drive® compatible cartridge BBs with 20 tooth in the ring, CNC engineered, Cr-Mo steel. For use with 32mm headset wrench (#06F2).
16B1 Tube-end chamfering tool. Patented. 16H1
11B1
11B3
11D3
11F2
16G1 Saw guide, for up to 1-1/4” (32mm) tubes. 90-degree no swing design. Patented. 16H1 Mini hack saw, contains Bi-Metal H.S.S. saw for Carbon Fiber tubes. Not recommended for other materials.
16G1
11D3 For Shimano® / ISIS Drive® compatible cartridge BBs and Chainring lockring with 8 external notches, Cr-Mo steel. For use with 32mm headset wrench (#06F2).
16H1S Spare H.S.S. Bi-Metal saw for #16H1 series mini hack saws.
16H3
16H3 Professional hack saw. Contains carbide grit blade, especially for carbon fiber tubes. It's also adjustable to 45 degree.
11F2 For Campagnolo® Ultra-torque / Shimano® Hollowtech II / Truvativ® Howitzer compatible crank adaptor, Cr-Mo steel. 11F3 For Shimano® Hollowtech II compatible crank adaptor, Cr-Mo steel. For use with 8mm hex key (#35V8). Patented.
11F3
11H1
11R3
16H3S Carbide grit blade, for #16H3. 26A3
11H1 BB and headset lockring tool.
26A3 Frame & fork adjuster, for expanding & compressing steel forks, chain stays, and seat stays.
16H3S
11R3 Bearing cup press tool, for BB30, BB86, BB92, BB386. Patented.
Cable Tools
Safety 21C2 ABS trouser clips with 3M® “Scotchlite” reflective sheeting.
01A1 Cable pliers, with a thumb lock to hold the cable tight for one hand operation. 21C2
67A3 Pro shop cable & spoke cutter for Shimano® SIS SP. Contains inner wire and outer casing reconditioner. Patented.
21M2 Velcro safety bands with Microlite® reflective tapes. 21R2 Steel trouser clips with 3M® “Scotchlite” reflective sheeting.
67B4 Cable cutter.
51WB-53WB Safety flag, made of net-inserted fluorescent pennant and fiberglass pole. Different length and sections available.
06
16A4 H.S.S. bladed cutter to use on Ti/Alu/Cr-Mo/Carbon steel, up to 1-5/8” (42mm). Not recommended for Threaded tubes or Carbon Fiber tubes. Contains one spare H.S.S. blade.
01A1 21R2
21M2
51WB-53WB
67A3
67B4
07
Spoke Tools
Chain Tools
08A3 Cr-Mo spoke tool, for 3.20mm/80 ga./0.127" nipples, black vinyl coated.
29B2 For Shimano® compatible HG/UG/IG chains, Cr-Mo steel. Perfect for 7, 8, 9, and 10-speed chains. 84mm
45mm
29C3 For Shimano® compatible HG/UG/IG chains, up to 9-speed chains. 29C2S Spare shaft for #29C2 & #29C3. 61A4 Chain tool, for Shimano® compatible HG/UG/IG chains, Cr-Mo steel. Perfect for 6, 7, 8, 9, and 10-speed chains. Special lid insures the chain at the right position. So there is no need to put your fingers on the chain to avoid greasy and dirty. Patent pending.
29B2
29C2
29C3
29C2S
62P3 Pro shop chain tool, for Shimano® compatible HG/UG/IG chains, Cr-Mo steel. Perfect for 6, 7, 8, 9, and 10-speed chains. Connecting rivet pilot pin breaker included. Special lid insures the chain at the right position. So there is no need to put your fingers on the chain to avoid greasy and dirty. Patent pending. 62U3 Pro shop chain tool for 11-speed chains. Connecting rivet pilot pin breaker and pin peen included. Special fixed chain device to make sure the chain at the right position. So there is no need to put our fingers on the chain to avoid the hand may get greasy and dirty. Patent pending.
08C5 Stainless steel spoke tool, for 3.45mm/80 ga./0.136” nipples. Ergonomic design for high tension spokes.
61A4
08A3
08B3
08C5
1208
Connecting pilot pin breaker
12B3 Spoke tool for 3.2mm (Square) nipples with ergonomic & interval marked handle.
Offset Link chain
12C3 Spoke tool for 5.5mm (Hex) nipples with ergonomic & interval marked handle. 12A3
62B3
61A3S
62B7
Pin Peen
12B3 3.2mm
3/16"
5.5mm
12D3 Spoke tool for 3.6mm (Square) nipples with ergonomic & interval marked handle.
12D3
12C3
3.6mm
12F8
12F8 Forged 8-groove spoke tool, 10-15G, Cr-Mo steel. 12G4 Spoke tool for Shimano® wheel systems. 12H4 Spoke tool for Mavic® wheel systems.
62P3
62U3
12J4 Spoke tool for 3.20mm/80 ga./0.127" nipples.
62P3S
12K4 Spoke wrench for 3.45mm/80 ga./0.136" nipples. 12G4
12H4
12J4
12K4
12L4
12M4
62C3
62P3S Spare shaft for #62xx series. 62C3 Stainless steel go / no-go chain checker.
12L4 Spoke wrench for 12G / 13G nipples. 12M4 Spoke tool for Mavic® 6.4mm 7-spline. 12S4 Nipple wrench for deep rims. With spring tighten the nipple onto the spoke easily. With depth control to tight the nipple 3~4mm on the spoke. Also can use with 1/4" electric screwdriver.
62D1
62D1 All-in-1 master link plier, Cr-Mo steel. Patented. 62H1 Foldable chain hook. Patented.
12S5 Rotatable nipple driver for deep rims. With spring tighten the nipple onto the spoke easily. With depth control to tight the nipple 3~4mm on the spoke.
30C1 ChainMaster, for rear chain stay, dropout, and derailleur protection when you travel. Adjustable to fit different length of axles (130, 135, 160, and 165mm). Patented.
08
1208 8-groove spoke tool, for 10-15G nipples. 12A3 Spoke tool for 3/16” (Hex) nipples with ergonomic & interval marked handle.
61A3S Spare shaft for #61A3. 62B3 Pro shop chain tool for 1/2"x3/32", 1/2"x1/8" BMX chains, including YBN® “Offset Link” chains, Cr-Mo steel. Connecting rivet pilot pin breaker included. Special lid insures the chain at the right position. So there is no need to put your fingers on the chain to avoid greasy and dirty. Patent pending. 62B7 Pro shop chain tool for 1/2"x3/16" chains, Cr-Mo steel. Connecting rivet pilot pin breaker included. Special lid insures the chain at the right position. So there is no need to put your fingers on the chain to avoid greasy and dirty. Patent pending.
08B3 Cr-Mo spoke tool, for 3.30mm/80 ga./0.130" nipples, green vinyl coated.
29B2S
29B2S Spare shaft for #29B2. 29C2 For Shimano® compatible HG/UG/IG chains, up to 9-speed chains.
62H1
30C1 w/o quick release
12S4
12S5
12T4
12T4 Bladed spoke catcher, for thickness 0.9~2.0mm. Patented.
09
Cleaning & Lubrication
Tire Service 1 9 0 3 Steel tire lever set, zinc plated. 56E6 Glueless patch set AirDam, six patches per set.
C121 C115
56H2 Glueless patch set AirDam, 20 sets #56E6 per card. 1903
5 6 J 5 Glueless patch set AirDam, 50 sets #56P6 in jar.
64D3
64P3 C123 C115S
56P6 Glueless patch set AirDam, six patches per set. 64D3 Screwdriver type downhill tire lever, works for even most stubborn bicycle tires, Cr-V steel. Metal parts covered by durable nylon provide extra protection for Alu & Carbon Fiber rims. 64P3 POM tire levers, set of 3 pieces. Unique V shaped design can be easily fixed on the spokes. Air vent function added on back. Small V shaped design on back is a fulcrum on the rim for tire removal. Patented.
65A1
65B1
C133
C134
C141
C143
C145
65A1 IceToolz® tire puncture repair kit. Contains: 18 patches, 3 tire levers, 10ml adhesive, 8cm valve hose, and a sandpaper. 65B1 Tire puncture repair kit. Contains: 125ml adhesive with brush, 3 sandpapers (85x45mm), and 30 patches (Ø42mm).
66F1
66G1
56E6
6 6 F 1 Tire sealant. For all inflatable rubber tubes and tubeless tires. Contains 120ml and one small piece of valve tool for Schrader and Dunlop valves. Applicable for tire pressure under 60 PSI, and suggest replenishing after half year. One bottle fills 2 tires.
C153
C164
C172
66G1 10ml adhesive. 50 tubes in jar.
10
56H2
56J5
56P6
C173
C175
C179
C212
C272
C115 Chain scrubber, 20 total brushes with exclusive 4-sided scrubber system clean chain spotlessly. Contains one spare sponge. Rubber band added to allows it to hang on the seat stay by itself, without the need of holding the chain scrubber with your own hand. This provides more efficiency while cleaning. Patented. C115S Spare parts for #C113 & #C115. Contains brushes and two sponges. C121 Two-way brush, has soft bristles for delicate & stiff bristles for aggressive cleaning. C123 Sprocket cleaning brush, up to 10-speed. C133 Concentrated degreaser, water based degreaser is better for the environment and cleaning your bike. Volume: 4oz. / 120ml. C134 Jumbo concentrated degreaser. Water based degreaser is better for the environment and cleaning your bike. Volume: 15 oz. / 400 ml. C141 PTFE lubricant, contains PTFE & other additives to keep your chain running smooth. Volume: 4oz. / 120ml. C143 Cutting fluid. Volume: 2 oz. / 60 ml. C145 Anti-slip Paste, for assembling parts made of carbon fiber and aluminum alloy. Keeps parts from moving or loosening and ensures perfect corrosion protection, also prevents the two components seizing up. 5ml. C153 Pro shop apron, double zip center pockets, dual open side pockets, and single zip chest pocket. Tough enough for a pro shop & comfortable enough for home use. C164 Brush set, with stiff bristle for aggressive cleaning. C172 Anti-wear Copper Grease, protects metal against corrosion, heat, and water. Ideally for hubs, screws, nuts, bolts, bearings, and BBs. Highly lubricating even with small amount. Temperature range: -25°C ~ 200°C. Volume: 4 oz. / 120 ml. Contains: Copper, Graphite, Silicon. C173 Complex Calcium Sulfonate Grease for Hub, unique, high quality lubricating, an over based calcium sulfonate thickener. Combined with its mid-viscosity petroleum base fluids are as a premium, all-purpose lubricant. Complex Calcium Solfonate Grease’s high load carrying ability, excellent water resistance, oxidation and corrosion prevention, and outstanding performance in a wide temperature range, make it high performance premium grease. Recommended for application on hubs. Temperature range: -25°C ~ 200°C. Volume: 3 ml. Contains: Calcium Sulfonate. C175 Boron Nitride Grease for Ceramic Bearing, specialized with adhesion for ceramic surface. It is designed for high temperature performance, oxidation stability, water resistance, high pressure stability, low friction coefficient, and rust prevention. Boron Nitride Grease prevents high-temperature adhesion and sintering. Temperature range: -25°C ~ 200°C. Volume: 3 ml. Contains: Boron nitride, extreme pressure additive. C179 Grease gun. Ergonomic design for for all copper grease. C212 Chain scrubber and concentrated degreaser, combo set. C272 Anti-wear copper grease and grease gun, combo set.
11
Air Pumps
VeloDuo
VeloAgile
Accessories
VeloClub
A111 VeloDuo High pressure / high volume alu mini pump, telescoping design for faster and easier inflating. Presta / Schrader / Dunlop, up to 120 psi / 8.2 bar. A211 VeloAgile High pressure alu mini pump, with 2-tone T-handle and alu thumblock lever. Presta / Schrader / Dunlop, up to 120 psi / 8.2 bar. A351 VeloClub High pressure alu mini floor pump, with 2-tone T-Handle and inline gauge. Presta / Schrader / Dunlop, up to 140 psi / 9.6 bar. A451 Sport High pressure steel floor pump, with high-mount gauge. Ergonomic 2-tone handle designed. Twin-valve with thumblock lever. Presta / Schrader / Dunlop, up to 160 psi / 11.0 bar. A551 Comp High pressure steel floor pump, with top-mount gauge. Ergonomic 2-tone handle designed. Twin-valve with thumblock lever. Presta / Schrader / Dunlop, up to 160 psi / 11.0 bar. A651 Xpert High pressure alu floor pump, with top-mount gauge. Ergonomic 2-tone handle designed. Twin-valve with thumblock lever. Extra large base for excellent stability. Presta / Schrader / Dunlop, up to 160 psi / 11.0 bar.
17B1 Stainless steel bottle opener. 17H2 IceToolz® baseball cap, one size for all.
443
503
903
cm
cm
17B1
cm
A111
A211
17M3 Tape measure, measures up to 3 meters / 10 feet in centimeters & inches.
17H2
A351
17N1 Rubber hammer, 2.5lb.
Sport
Comp
Xpert
3003
3003
cm
17N1
17M3
cm
cm
A451
17W1~17W5 IceToolz® mechanic’s shirt. Made of 65% polyester and 35% cotton, wrinklefree and keeps your skin dry. Size S (17W1) - Size XXL (17W5).
store
store
2803
17R1~17R5 IceToolz® T-shirt, 100% cotton. Size S (17R1) – Size XXL (17R5).
A651
A551
A751 Hign Pressure Alu Shock Pump. Non-Scratch rubber sealing system. Schrader anti-leak chuck. Up to 300 psi / 20.6 bar with gauge. With pressure relief valve. A451H Rubber hose for all of IceToolz® high pressure floor pumps.
Width
346
A451V Pump valve. Use for all IceToolz® floor pumps, Presta / Schrader / Dunlop.
12
300 20.6
184
S M L XL XXL Size Width 45cm 49cm 53cm 57cm 61cm
10
-2~-3 psi
A751
A451H
A451V
17R1-17R5
S M L XL XXL Size Width 51cm 53.5cm 56cm 58.5cm 61cm 17W1~17W5
13
Tool Kits
Multi Tools 9 1 A 2 Pocket-17 3x4x5x6x8mm hex keys, +/_ screwdrivers, T-25 star wrench, 8x9x10mm spanners, 15mm pedal wrench, 0.127x0.130x0.136” spoke tools, tire lever, bottle opener. Pouch included. Weight: 218g.
82A8 Ultimate tool kit. 305x210x65mm.
9 1 A 4 Pocket-22 3x4x5x6x8mm hex keys, +/_ screwdrivers, T-25 star wrench, 8x9x10mm spanners, 15mm pedal wrench, 0.127x0.130x0.136” and 12x13x14x15G spoke tools, chain tool (Shimano® 7, 8, 9, 10-speed compatible), tire lever, bottle opener. Pouch included. Weight: 266g.
82F4 Essence tool kit. 305x210x65mm. 85A4 Advanced mechanic tool kit. 380x165x125mm. 91A2
91A4
85A6 Pro Shop mechanic tool kit. 380x165x125mm.
9 1 C 3 Reserve-16 2x2.5x3x4x5x6x8mm hex keys, +/_ screwdrivers, T-25 star wrench, 12x13x14x15G spoke tools, chain tool (Shimano® 7, 8, 9, 10-speed compatible), tire levers. Weight: 210g. Patented. 9 3 B 1 Release-20 2x2.5x3x4x5x6x8mm hex keys, +/_ screwdrivers, 8~15mm spanners, 14x15G spoke tools, tire levers. Weight: 176g. Patented.
82A8 91C3
93B1
82F4
94A5
9 4 A 5 Compact-10 1.5x2x2.5x3x4x5x6mm hex keys, +/_ screwdrivers, T-25 star wrench. Weight: 142g. Patented. 9 5 A 5 Compact-11 1.5x2x2.5x3x4x5x6x8mm hex keys, +/_ screwdrivers, T-25 star wrench. Weight: 150g. Patented. 9 6 K 2 Blade Man 3x4x5x6mm hex keys, +/_ screwdrivers, bottle opener, 10mm open-ended, knife, key ring. Weight: 148g. Patented.
95A5
96K2
97A3
9 7 A 3 Mighty-9 1.5x2x2.5x3x4x5x6mm hex keys, +/_ screwdrivers. Weight: 144g. 9 7 B 3 Mighty-10 1.5x2x2.5x3x4x5x6x8mm hex keys, +/_ screwdrivers. Weight: 152g. 9 7 C 3 Mighty-17 1.5x2x2.5x3x4x5x6x8mm hex keys, +/_ screwdrivers, 8x9x10x15mm spanners, 14x15G spoke wrenches, tire lever. Weight: 169g. 9 7 T 1 Star-8 T-9x10x15x20x25x27x30x40 star keys. Weight: 150g.
14
97B3
97C3
97T1 85A4
85A6
15
Display & Storage
Display & Storage
P643 Stand-By-Me, for display and repair. The height and angle of chain stay holder adjustable to fit different size and style of frames.
P511 Centipede stand, up to 29". Display your bike in home or shop so quickly. Unique design links can display with a single line, small circle, or large oval in the shop.
P646 Rear axle bike stand, up to 29�. P648 Display stand. Up to 29�, foldable for easy storage. P655 Two-way storage hook, for slat wall or regular wall. Patented.
P616 Storage stand, for 2 bikes. Extra bike holder can be added for up to 4 bikes. With a stable four legged base, and coating on holder to keep your bicycle scratch free. Patented.
P661 Storage chains, 2 pieces. It is a practical and convenient way to store your bicycle, keeping it scratch free and out of the way of children. The coating grip to protect your bicycle from scratches.
P511
P643
P648
P646
P684 Wood thread with dowels, black vinyl coated.
P616S Extra bike holder for P616 to hang more than 2 bikes. Hook angle adjustable to fit different style of frames. Patented.
P686 Machine thread with nuts and spring washers, black vinyl coated. P811 Bicyclick Set. Suitable for major sector of FLAT bars. With a simple click, stand your bike upright anywhere & everywhere.
P621 Bicycle lifter, dual pulley system, maximum height of 3 meters. GS certified.
P812 Bicyclick Duo Pack. 2 sets of P811 in the combo package.
P631 Storage rack, foldable for out of way storage. P655
P633 Storage rack, foldable for out of way storage. Hook angle adjustable to fit different style of frames. Patented.
P616
P661
P684
P686
P822 Bicyclick Duo Pack. 2 sets of P821 in the combo package.
P616S P811 P812 (P811 x 2 sets)
P821 P822 (P821 x 2 sets)
P621
16
P631
P821 Bicyclick Set. Suitable for major sector of DROP bars. With a simple click, stand your bike upright anywhere & everywhere.
P633
P831
P831 Click-Base Set. Neat & Tidy solution to stand your bike at home, yard and office. *Bicyclick set required.
17
Xpert Series – Tools for Specialists
Impact Tools for Assembly Line
E113 Star nut installation tool, for 1”, 1-1/8”, and 1-1/2” fork steerer. Patented.
M021 BB installation tool – 36mm, magnetic, left side. M031 BB installation tool – star, right side. M041 Crankarm bolt installation tool – 14mm.
E127 Advanced truing stand. Dual supports, brake rotor gauge and needle gauge. Patented.
1/2" Drive
E128 Pro shop truing stand. Dual supports, brake rotor gauge and dial gauges with meter scales to 0.01mm tolerance. Patented.
M051 BB installation tool – right side. M061 BB installation tool – cartridge.
E113
M074 BB installation tool – 4-notch lockring.
M021
M031
E132T Tool tray for repair stand.
E128
E127
M041
E132 Floor repair stand. Single clamp.
M083 BB installation tool – 3-notch lockring.
E132B Steel base for E132 – 8x600x600mm.
M091 BB installation tool - for Campagnolo® Ultra-torque / Shimano® Hollowtech II / Truvativ® Howitzer compatible crank adaptor.
E134 Floor repair stand. Dual clamp. E134B Steel base for E134 – 8x600x900mm.
M093 BB installation tool - for Shimano® BBR60 crank adaptor.
E132T
M100 Headset lock nut installation tool – 30mm. M102 Headset lock nut installation tool – 32mm.
E132
E134
Tools are optional
M051
M061
M074
M083
E137 Professional repair stand. Rotatable clamping mechanism holds Ø25.4~55mm tubes. Quick release for easy adjust and fold for travel. 3-leg stands stable and portable. Contains towel holder. E138 E137 and durable carry bag.
Steel base E132B is optional Tools are optional
M106 Headset lock nut installation tool – 36mm.
Steel base E134B is optional Tools are optional
E613 Race stand, carry bag included.
M123 Headset head cup installation tool – 43mm. M127 Headset head cup installation tool – 47mm.
18
M091
M093
M100 / M102 / M106
M123 / M127 E137 Tool tray and tools are optional
E138
E613
19
Xpert Series – Tools for Specialists
Xpert Series – Tools for Specialists
E181 Head tube reaming & facing tool. For 1" and 1-1/8" conventional headset systems. E181A, E181B, and E181F are included. E185 BB tapping & head tube reaming & facing set. E171F, E171L, E171R, E171T, E173L, E173R, E173T, E181A, and E181B are included. Patented.
E145 Headset cup / BB cup press tool, up to 1-1/2”. For head tube length up to 260mm. Patented.
E181A Head tube reamer, 30mm diameter for 1" conventional headset systems.
E145L Extension kit, extends E145 to handle the head tube up to 360mm in length. E158 Complete tap set with handle.
E181B Head tube reamer, 34mm diameter for 1-1/8" conventional headset systems. E145
E171F BB & head tube facer, up to 55mm diameter.
For headset cups
For BB cups
E181
E185
E181P + E181R: for Cane Creek E181C Head tube reamer, 34mm diameter for 1-1/8" conventional headset systems, Chris King®. E181T + E181U: for Campagnolo and FSA E181F Head tube facer, up to 45mm diameter.
E171L BB screw, English (1.37"x24TPI), for left side. Black.
E181G Head tube reaming & facing cutter, 41.4mm diameter for Cane Creek® 1-1/8" ZS compatible low profile headset systems.
E171R BB screw, English (1.37"x24TPI), for right side. Golden.
E181H Head tube reaming & facing cutter, 44mm diameter for Cane Creek® 1-1/8" ZS compatible low profile headset systems.
E171T BB screw, Italian (36mmx24TPI). Silver.
E181A / E181B
E173L Tap, English (1.37"x24TPI), for left side. Black.
E181C
E181F
E181G
E181H
E181P Head tube reaming & facing cutter for Cane Creek® 1-1/8" IS compatible integrated headset systems, top.
Facing
E173R Tap, English (1.37"x24TPI), for right side. Golden.
E181R Head tube reaming & facing cutter for Cane Creek® 1-1/8" IS compatible integrated headset systems, bottom.
E173T Tap, Italian (36mmx24TPI). Green. E175 BB English tapping & facing tool. Patented.
E181L Centering cone for the head tube inner diameter 48~54mm. Usually used in conjunction with E181S.
E158 M3x0.5P M5x0.8P 1/2”x20TPI L+R
E181L
M6x1.0P M10x1.0P 9/16”x20TPI L+R
E181S
E181P / E181T
Tapping
E181R / E181U
E181S Head tube reaming & facing cutter, 49.6mm diameter for 1-1/2" OnePointFive headset systems. E181T Head tube reaming & facing cutter for Campagnolo® Hiddenset compatible integrated headset systems, top. E181U Head tube reaming & facing cutter for Campagnolo® Hiddenset compatible integrated headset systems, bottom.
E181V
20
E171F
E171L Black E171R Golden E171T Silver
E173L Black E173R Golden E173T Green
E181V Head tube reaming & facing cutter for FSA® Integrated #44 series headset systems, 1-1/8", top. E181W Head tube reaming & facing cutter for FSA® Integrated #44 series headset systems, 1-1/4", bottom.
E175
E181W
E193
E193 Seat tube reamers, for seat post size 27.2, 30.9, and 31.6mm diameter.
21
Xpert Series – Tools for Specialists
Xpert Series – Tools for Specialists E211 One-way torque wrench, 21~105N.m, for 3/8” & 1/2” drive sockets.
E242 Crown race installation tool, for 1” and 1-1/8” fork steerer tubes.
E212 One-way torque wrench, 5~25N.m, for 1/4” & 3/8” drive sockets.
E244 Crown race installation tool, for 1”, 1-1/8”, and 1-1/2” fork steerer tubes.
E213 One-way torque screwdriver, 1~5N.m, for 1/4” drove sockets. Also contains bits of Hex, Pozi®, Phillip, Slot, Torx® (totally 32 bits), and a 1/4” adaptor.
E211
E212
E253 Crown race remover, up to 1-1/2”. E263 Frame & fork adjuster, for expanding & compressing steel forks, chain stays, and seat stays. Trapezoid thread provides extra power and longer life time. With protective rubber where tool meets bike.
E214 Two-way torque wrench, 20~100N.m, for 3/8” & 1/2” drive sockets. E216 Two-way torque wrench, 3~15N.m, for 1/4” drive sockets. Also contains bits of Hex, Phillip, Slot, Torx® (totally 17 bits), a 1/4” adaptor, and a 1/4” drive extension bar: 52mmL.
E214
E271 Disc mount facing tool, unique designed for conventional & 20mm thru-axle frames and forks.
E213
E217 Two-way digital torque wrench, 20~100N.m, for 3/8” & 1/2” drive sockets.
E242
E218 Two-way digital torque wrench, 5~25N.m, for 1/4” & 3/8” drive sockets.
E244
E217
E21K 41 piece socket & bit set.
E253
E21S 3/8” drive socket set. Contains 4/5/6/8mm hex keys and T-25. For IceToolz® torque wrenches and 3/8" drive wrench.
E281 Fork threading tool for cutting and chasing 1”x24TPI threading on non-chromed fork steerers.
E221 Headset cups remover, for 1” and 1-1/8”. E216
E223 Headset cups remover, for 1-1/4” and 1-1/2”.
E218
E231 Crown race seat cutting tool, for 26.4, 27.0, and 30.0mm diameter. E263
22
E21K
E21S
E221
E223
E231
E281
E271
23
Xpert Series – Tools for Specialists
Xpert Series – Tools for Specialists E291 Bearing puller, for BB30, BB86, BB92, and Campagnolo® Ultra-torque. Patented.
E353 Derailleur hanger alignment tool. Patented. E371 Digital protractor.
E293 Press-fit bearing removal tool. For internal diameter 24mm ~ 30mm bottom bracket bearings.
E381 Spoke tension meter, Japanese Mitutoyo® meter, scales to 0.01mm, for rim size 18” and up.
E312 Wheel centering gauge, for rim size 16”~31”. E313 Wheel centering gauge with meter scales to 0.1mm tolerance. The black tolerance tabs are designed to assign a specific range of acceptable tolerance quickly.
E382 Spoke tension meter, scales to 0.01mm, for rim size 18” and up.
E293 E291 E353
E383 Spoke tension meter, digital meter, scales to 0.01mm, for rim size 18” and up.
E371
E322 Stainless steel spoke ruler, up to 330mm / 13”. E325 Pupa seat tube gauge. Easily to check seat tube size from Ø25.0mm to Ø31.8mm. Patent pending.
E521 Stripped pedal threads repair kit. Patented. E521H 9/16" Helicoil threads, set of 5 pairs. E312
E331 Thread gauges, for metric & SAE. E341 Frame & fork end alignment tool. Align steel frames and forks. Not recommended for other materials.
E313
E322
E381
E382
E383
E521T Thread tap set for #E521. For use with re-threading the stripped pedal threads on damaged crank arms. Please use with the #E521 Stripped Pedal Threads Repair Kit. Patented.
Innovation Award
E331
24
E325
E341
E521
E521H
E521T
25