Mountain Sports Distribution - Winter 20/21 Catalog (USA)

WINTER

2020/21 USA CATALOG

802 9 ST N, GOLDEN, BC V0A 1H2 PLACE YOUR ORDER: ONLINE: MOUNTAINSPORTSDISTRIBUTION.COM

BY E-MAIL: ORDERS@MOUNTAINSPORTSDISTRIBUTION.COM

BY PHONE: 1.888.987.7533 (SLED)

CONTENTS MOUNTAIN L AB. . . . . . . . . . . . . . . . . . . . . . . . . . . 2 HIGHMARK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 MAMMU T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 CFR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 8

MOUNTAIN LAB

Essential Gear for the Backcountry

MOUNTAIN MAMMUTLAB SKI PULL STRAP

SNOWMOBILE TOW KIT

The perfect tool to help get your snowmobile unstuck! This 700 kg sling is tough, compact, and easy to use. Simply pass an end through a ski loop and pull on both ends or girth hitch it to a ski and have two people pull. Safer, more effective, and less impact on your back than simply pulling. Easily fits inside your pocket.

Extremely lightweight and easy to use. Sets up in seconds and provides an effective way to tow a broken snowmobile home. Simply remove the belt of the broken snowmobile, girth hitch the strap to the tow snowmobile, and then loop the two straps around the broken snowmobile’s spindles. The system works well in tricky terrain and allows the rider of the broken snowmobile to continue to maintain control.

RATCHET STRAP

TOW / RECOVERY STRAP

Mountain Lab Ratchet Straps are tough! Using a 1.5 inch strap this 12ft, 3300lbs breaking strength ratchet strap with a secure hook is the best way to tie down your toys! Includes one per package.

This heavy-duty 2”, 10,000lb Tow Strap is perfect for your next outdoor adventure. With two oversized loops and a 4.78” carabiner this strap is perfect to put in your UTV, ATV, or the back of your car.

MTN-LAB-SPS / $19.99

MTN-LAB-STRP / $24.99

MTN-LAB-TOW / $29.99

MTN-LAB-TOW2 / $39.99

2 0 2 0 / 2 1 D E A L E R C ATA L O G U E

3

MOUNTAIN LAB GOGGLE SOCK

MTN-LAB-GSK / $14.99

ULTIMATE BACKCOUNTRY CHAINSAW

Mountain Lab goggle socks are designed to quickly throw on and protect your goggle lenses during transport. Made of super stretchy, quick drying microfiber. One size fits most.

MTN-LAB-SAW1 / $24.99

The Ultimate Backcountry Chainsaw is extremely compact, lightweight, and cuts through wood amazingly well. The perfect tool for all your outdoor adventures!

STEALTH

BRAAAP

MTN-LAB-GSK1

MTN-LAB-GSK2

MOUNTAIN

TRACKS

MTN-LAB-GSK3

MTN-LAB-GSK4

MOUNTAIN SLEDDER1

MOUNTAIN SLEDDER2

MTN-LAB-GSK5

MTN-LAB-GSK6

FOLDING HANDSAW MTN-LAB-SAW2 / $24.99

This is a sturdy, compact hand saw which uses a 1.2mm steel blade compared to the standard .9mm blade. Great for cutting wood.

4

M O U N TA I N S P O R T S D I S T R I B U T I O N

MOUNTAIN MAMMUTLAB X800 LUMEN FLASHLIGHT KIT

X1800 LUMEN FLASHLIGHT KIT

The x800 Flashlight Kit is the lightest flashlight in the Mountain Lab line-up and most suitable for helmet use. Featuring 800 lumens of power and up to 23.5 hours of run time, this powerful light is the ultimate tool for adventures. Kit includes quick-go connect, GoPro mount, and handlebar mount.

The X1800 packs a full 1800 lumens of light into a compact, efficient design. Designed for those that operate at high speed at night; this is the perfect choice. Kit includes quick-go connect, GoPro mount, handlebar mount, and wired remote control for handlebar use.

MTN-LAB-X800 / $79.99

KITS INCLUDES: • Micro USB charging cable • Handlebar mounting bracket • GoPro accessory mount • GoPro helmet mount • Wired remote (only available with x1800)

MTN-LAB-X1800 / $169.99

Replacement Parts

SKU

MSRP

X800 and X1800 Replacement GoPro mount

MTN-LAB-X178

$19.99

Spare X1000 Mountain Lab Batteries (3400mAh)

MTN-LAB-X172

$24.99

X1000 Handlebar Mount - Mountain Lab

MTN-LAB-X173

$19.99

Vented Bike Helmet Strap Mount

MTN-LAB-X174

$14.99

X1000 GoPro Mount Tools - 4 pcs

MTN-LAB-X176

$14.99

X1000 Mountain Lab Light Clamp

MTN-LAB-X177

$19.99

2 0 2 0 / 2 1 D E A L E R C ATA L O G U E

5

MOUNTAIN LAB BACKCOUNTRY FIRST AID KIT

BACKCOUNTRY PLUS FIRST AID KIT

Designed specifically for snowmobilers, this premium first aid kit is incredibly well-stocked and highly durable to withstand the rigors of snowmobiling. An absolute necessity in the backcountry, this kit includes 62 essential supplies to help ensure the safety of your group. Featuring a durable, water-resistant neoprene cover; this is what you need in your tunnel bag or pack. Outside dimensions of the kit are 20cm X 15cm X 4.5cm (8”x 6”x 2”).

The Backcountry Plus first aid kit provides even more supplies than our backcountry kit in a bigger case. Perfect for your sled, ATV, cabin, kayak, boat, and more! Outside dimensions: 20cm X15cm X 9cm (8” x 6” x 3.5”).

MTN-LAB-FA1 / $39.99

MTN-LAB-FA2 / $49.99

CONTENTS: • 1 emergency blanket (130cm x 210cm) • 4 latex gloves • 1 cotton triangular bandage • 1 mouth-to-mouth mask • 6 alcohol wipes • 3 dressing pads (10cm x 10cm) • 6 dressing pads - adhesive (6cm x 7cm) • 1 PBT bandage

• 10 adhesive bandages (5.6cm x 1.9cm) • 10 adhesive bandages (7.2cm x 1.9cm) • 10 adhesive bandages (7.6cm x 2.5cm) • 5 butterfly closures • 1 medical tape roll (4.5m) • 1 elastic bandage roll (4.5m) • 1 dressing bandage (18cm x 18cm) • 1 sterile gauze pad (7.5cm x 7.5cm)

CONTENTS: • Burn gel • 2 burn dressings – small • 2 burn dressings – large • 1 bandage scissors • 1 emergency blanket (130cm x 210cm) • 4 latex gloves • 2 cotton triangular bandages • 1 mouth-to-mouth mask • 12 alcohol wipes • 3 dressing pads (10cm x 10cm)

• 6 dressing pads - adhesive (6cm x 7cm) • 1 PBT bandage • 10 adhesive bandages (5.6cm x 1.9cm) • 15 adhesive bandages (7.2cm x 1.9cm) • 10 adhesive bandages (7.6cm x 2.5cm) • 5 butterfly closures • 1 medical tape roll (4.5m) • 1 elastic bandage roll (4.5m) • 2 dressing bandages (18cm x 18cm) • 2 sterile gauze pads (7.5cm x 7.5cm)

EMERGENCY BIVY MTN-LAB-BVY / $19.99

6

M O U N TA I N S P O R T S D I S T R I B U T I O N

If things go sideways and you are forced to spend a night out in the woods the Mountain Lab emergency blanket could be a crucial element for your survival. This extremely lightweight and ultra-compact bivy is made from aluminum coated polyethylene which is designed to reflect up to 90% of your body heat back to you. Take it with you wherever your next adventure leads.

FEATURES • Size: 7ft X 3ft • Waterproof • Windproof • Ultra-compact • Mountain Lab bright orange emergency colour • Polyethylene aluminum coated tear resistant material

MTN-LAB-RD1 (1 PIECE) / $119.99

MOUNTAIN MAMMUTLAB

ROAM 2W 2-WAY RADIO

MTN-LAB-RD2 (2 PIECE) / $199.99

The Mountain Lab Roam 2W 2-Way Radio has been specifically designed for backcountry users. It features an IP67 waterproof mic and transmits with the maximum power permitted as a license-free radio to ensure maximum range. It is fully compatible with other backcountry radios on the market and has 22 channels and 121 privacy codes. Can be used with or without the waterproof mic.

FEATURES • 2W Power • IP 67 Waterproof mic • 22 Channels, 121 privacy codes • NIMH USB Rechargeable batteries, standard AA Battery compatible for backup • 50+ hours run time (in stand-by mode) • FCC and IC certified • Backlit Screen • Easy to navigate menu • 10 Call tone/Roger Beep • Keyboard lock • VOX function • Flashlight/Back light//Channel Scan • Dual Watch/TOT (180s) • Room Monitor/Channel Monitor • Adjustment volume level • Low battery alarm • Compact design

REPLACEMENT SPEAKER MIC COVER MTN-LAB-RCV / $24.99

2 0 2 0 / 2 1 D E A L E R C ATA L O G U E

7

MOUNTAIN LAB BLUETOOTH HELMET SPEAKER SYSTEM MTN-LAB-SPK1 / $59.99

The Mountain Lab Bluetooth Helmet Speaker System is designed for sledders, motorbikers, skiers, snowboarders, and other outdoor enthusiasts who like to listen to music while wearing a compatible helmet. It features easy to push buttons and easy pairing with your favourite device. The 40mm HD Speakers with Advanced CVC technology provide rich sound and block ambient noise as well as helping to cut down on background noise. * Please note that this unit does not work well with helmets which do not have a place for speakers.

8

SPECIFICATIONS

FEATURES

• Bluetooth Version: Bluetooth V4.1, CSR chipset • Working Time: 4-8hrs • Stand By: 120 hrs • Charge Time: about 2hrs • Speaker: Φ40mm • Battery Capacity: 200mAh • Color: Black • Operating Frequency: 2.4GHz • Connectors: USB • Intercom cable: scalable K cable

• Wirelessly listen to music with integrated Bluetooth technology • Hands-free function • Built-in Li-ion battery, long stand-by and working time • Support power displaying on cellphone

PACKAGE INCLUDES • 1 x Headset • 1 x USB Charger Cable • 2 x Sponge Pads • 2 x Sticker for Speaker • 1 x User Manual

MOUNTAIN MAMMUTLAB FLOOR DISPLAY - NARROW MTN-LAB-DIS2 / $59.99

KNEEPADS

MTN-LAB-KNE / $49.99 Designed for adventuring, these robust knee pads are ideal for snowmobiling or out on the trail. Easy to quickly put on and take off, these are a great value and great protection.

COUNTERTOP DISPLAY MTN-LAB-DIS1 / $69.99

2 0 2 0 / 2 1 D E A L E R C ATA L O G U E

9

2021 HIGHMARK

THE PROS’ CHOICE

FOR THE FULL TEAM VISIT:

10

HIGHMARKAIRBAGS.COM

RIDER: NADINE OVERWATER

ROB ALFORD CODY BORCHERS JUSTIN BEFU CHRIS BROWN JULIE-ANN CHAPMAN CARL KUSTER JEREMY HANKE DUNCAN LEE CODY MCNOLTY ANDREW MUNSTER NADINE OVERWATER REAGAN SIEG RILEY SUHAN LOGAN THIBODEAU BRETT TURCOTTE KHAN YONG GEE

NEW COLOR CHARGER X R.A.S

$849.99

CYLINDER SOLD SEPARATELY

The CHARGER X has a diagonal zipper for easy on and off, but still provides chest protection. Built for hard-charging riders, the CHARGER X provides both protection from impacts and the security of an avalanche airbag.

2610-01782-00381-116 (L/XL) - SAND

2610-01782-0067-116 (L/XL) - SMOKE 2610-01920-0067-116 (S/M) - SMOKE

2 0 2 0 / 2 1 D E A L E R C ATA L O G U E

HIGHMARK

• Now available in S/M size • Volume: 16L • Weight: 6.85 lbs (includes Airbag + Cylinder) (5.3 lbs pack/system/R.A.S. 3.0 + 1.55 lbs cylinder) • Removable Airbag System • 3.0 Snowpulse Inflation System • Exterior shovel blade and handle carry • External front pockets • Chest protection • Kidney protection • Leg loop • Internal compartment for avalanche safety equipment • Radio pocket and attachments

11

GUIDE P.A.S.

$949.99

CYLINDER SOLD SEPARATELY

The GUIDE is the largest pack in the Highmark collection.

At 32L, there is plenty of room for a first aid kit, spare gloves, spare goggles, emergency supplies, your lunch, and everything else you need!

HIGHMARK 2610-01860-0044-1032

12

M O U N TA I N S P O R T S D I S T R I B U T I O N

• Volume: 32L • Fleece-lined Goggle Pocket • Weight: 6.05 lbs (includes airbag + cylinder) (4.5 lbs pack/system/P.A.S. 3.0 + 1.55 lbs cylinder) • Protection Airbag System • 3.0 Snowpulse Inflation System • Exterior shovel blade and handle carry • Three main stow pockets • Hip belt pockets • Adjustable height hip belt (one size fits all) • Easy Belt system • Radio pocket and attachments • Adjustable volume compression straps • Leg loop

PRO P.A.S.

$899.99

CYLINDER SOLD SEPARATELY

The original in Trauma Protection. For 7 years running the Highmark PRO has been the #1 pack worn by snowmobile riders in North America.

CYAN 2610-01761-0001-1022

HIGHMARK

• Volume: 22L • Fleece-lined Goggle Pocket • Weight: 6.05 lbs (includes airbag + cylinder) (4.5 lbs pack/system/P.A.S. 3.0 + 1.55 lbs cylinder) • Protection Airbag System • 3.0 Snowpulse Inflation System • Exterior shovel blade and handle carry • Three main stow pockets • Hip belt pockets • Leg loop • Adjustable height hip belt (one size fits all) • Easy Belt system • Radio pocket and attachments

SMOKE 2610-01761-0067-1022

2 0 2 0 / 2 1 D E A L E R C ATA L O G U E

13

SPIRE LT P.A.S.

$899.99

CYLINDER SOLD SEPARATELY

The SPIRE Vest is the avalanche airbag vest snowmobilers love. The absolute lightest vest on the market provides uncompromising comfort combined with the P.A.S. System, affording the wearer the ultimate in avalanche protection.

HIGHMARK

• Volume: 18L • Weight: 6.65 lbs (includes airbag and cylinder) (3.1 lbs pack + 2 lbs 3.0 P.A.S. + 1.55 lbs cylinder) • Protection Airbag System • 3.0 Snowpulse Inflation System • Lightweight material • Exterior shovel blade and handle carry • Fully covered, durable front zipper • Adjustable side panels allows for SM-3XL fit with two compression straps • 3 front pockets • One main storage pocket • Leg loop • Internal compartment for avalanche safety equipment • Optional protection armour available • Radio pocket and attachments

2610-01602-0067-118

14

M O U N TA I N S P O R T S D I S T R I B U T I O N

RIDGE R.A.S.

$599.99 CYLINDER SOLD SEPARATELY

Compact, super lightweight and extremely well-designed, the RIDGE is for the rider that wants to feel like they don’t have anything on their back.

Enough volume for a lunch and spare gloves this minimalistic pack is great for extreme riding or those just getting into the backcountry.

HIGHMARK

• Volume: 15L • Weight: 5.5 lbs (includes Airbag + Cylinder) (3.95 lbs pack/system/R.A.S. 3.0 + 1.55 lbs cylinder) • Removable Airbag System • 3.0 Snowpulse Inflation System • Exterior shovel blade and handle carry • Leg loop • Secure-lock belt • Internal compartment for avalanche safety equipment • Radio pocket and attachment points

2610-01582-0067-115

2 0 2 0 / 2 1 D E A L E R C ATA L O G U E

15

ACCESSORIES

CYLINDER Snowpulse Series 2.0 Cylinder

HIGHMARK

EXTRA PROTECTION Vest Armor (Chest Only)

16

PRODUCT

USAGE

Snowpulse Series 2.0 Cylinder FULL

Use with any Highmark avalanche airbag, comes with 3 Burst Discs

2610-00840-9999-1

$199.99

Snowpulse Series 2.0 Cylinder EMPTY

Use with any Highmark avalanche airbag, comes with 3 Burst Discs

2610-00850-9999-1

$199.99

Vest Armour (Chest Only)

Fits Highmark SPIRE LT

2610-00990-0001-1

$49.99

Burst Discs - 3 Pack

Needed to refill Series 2.0 Cylinders

2610-00470-9999-1

$19.99

4500psi Carbon Tank

Partners with SCUBA High Pressure Refill Connect (MSD-SCBAPB).

Stand alone approximately 8-10 MSD-SCBA-4500 fills, partnered with 3300psi tank approx. 25 fills

$1,000

3300psi 80L SCUBA Tank

Partners with SCUBA Yoke Fill Adapter (MSD-SCPB). Stand alone fills appx. 3, two tanks appx. 10 fills.

ALN-80

$350

SCUBA Yoke Fill Adapter

Connect partners with 3300psi 80L Tank

MSD-SCPB

$70

SCUBA High Pressure Refill Connect

Connect partners with 4500psi Carbon Tank

MSD-SCAPB

$350

M O U N TA I N S P O R T S D I S T R I B U T I O N

PART #

MSRP

AIRBAG COMPARISON SPIRE LT

P.A.S.

PRO

P.A.S.

CHARGER X

RIDGE

R.A.S.

R.A.S.

HIGHMARK

P.A.S.

GUIDE

Airbag System

Volume

18L

32L

22L

16L

15L

Style

Vest

Backpack

Backpack

Vest

Backpack

S/M - 3XL

S - 2X

S - 2X

S/M, L/XL

S - 2X

6.05 lbs (2744 g)

6.05 lbs (2744 g)

6.85 lbs (3107 g)

5.5 lbs (2495 g)

Height Adjustable Size Fit Exterior Shovel Handle Holder Exterior Shovel Blade Pocket Probe Sleeve Chest Armour Weight Including Cylinder & Airbag

Available 6.65 lbs (3016g)

All 2021 models come with Inflation System 3.0 2 0 2 0 / 2 1 D E A L E R C ATA L O G U E

17

LIGHTER. SMARTER. BETTER. Ultralight, ultracompact avalanche airbags. Featuring an intuitive handle with adjustable height, new user-friendly set-up and the lightest, most compact system ever designed.

HIGHMARK

HANDLE 3.0

RELIABILITY

In an emergency situation, deployment of the airbag needs to be fast and intuitive. Studies have shown that in an extreme situation, many users are over-challenged and do not manage to activate the airbag.

Always ready in an emergency: any condition ready. The avalanche airbag is a piece of safety equipment that needs to work with 100% certainty and reliability in an emergency – irrespective of weather, temperature and external pressure.

Snowpulse’s new deployment handle is more intuitive to operate and is also height-­adjustable to allow it to be adapted to the wearer’s body height. The deployment handle is now a bright orange color to make it even more visible. There is no change to the tried-and-tested “T” shape of our ­deployment handle. The handle can be folded to allow compact storage in the shoulder strap. As with all Highmark by Snowpulse packs, the handle is located on the RIGHT SHOULDER—this allows snowmobilers to keep their hand on the throttle while deploying the pack.

Only pressure cartridges offer precisely the reliability of a dependable energy store over a period of years. This technology also guarantees a very high initial pressure to unfold the airbag reliably even in situations of external loading. Our focus in the latest development was on making the system even more user-friendly and further reducing maintenance.

INFLATION SYSTEM 3.0

COMPATIBILITY

The Inflation System 3.0 describes the component used to deploy the airbag. The system activates the deployment mechanism which opens the pressure cartridge with a pin and fills the airbag.

The integrated air volume amplifier also sends ambient air to the airbag in addition to the gas stored in the pressure cartridge.

The new Airbag 3.0 generation is NOT compatible with previous seasons of backpack models from generations 1.0 and 2.0.

The Airbag 3.0 backpacks are also NOT compatible with the Protection Airbag / Removable Airbag systems from generation 2.0 (From 2011/2012 up to and including 2015/2016).

The new Airbag 3.0 systems can be installed only in 3.0 backpacks from season 2016/2017 onwards! However, the 2.0 cartridges remain unchanged and can be used with both the new 3.0 system and the older system.

One of Snowpulse’s objectives for the new development was to bring the air volume amplifier and deployment mechanism together in a single housing in order to save space and weight.

The inflation system is reliable, low-maintenance and extremely user-friendly: just screw the cartridge in and you’re ready to go!

<

18

WEIGHT The Snowpulse 3.0 is Snowpulse’s lightest airbag system of all time and weighs less than 1 liter of water. At less than 1kg, this is one of the lightest systems on the market today.

M O U N TA I N S P O R T S D I S T R I B U T I O N

THE INFLATION SYSTEMS

PROTECTION AIRBAG SYSTEM (P.A.S.) VS. REMOVABLE AIRBAG SYSTEM (R.A.S.) The R.A.S. system is a square 150L airbag that is contained in and deploys from the top of the pack. It is extremely lightweight and has a low packing volume, taking up less space in your pack.

Highmark Protection Airbag System (P.A.S.)

Highmark Removable Airbag System (R.A.S.)

Trauma Protection

Protects the wearerâ&#x20AC;&#x2DC;s head, neck and chest area

Head on Top

Can keep the head and upper body on the surface

Removable

Remove entire airbag system from backpack

Simple & Safe

Simple and intuitive operation

Light & Compact

Light and very compact airbag system

ca 870g (1.92 lbs)

ca 850g (1.85 lbs)

HIGHMARK

The P.A.S. system is a collar-shaped airbag that is contained in and deploys from the shoulder harness of the pack, and is focused on providing maximum protection from burial as well as trauma protection.

P.A.S. Up to 38% of avalanche fatalities are due to trauma to the avalanche victim. Highmark by Snowpulse is the only manufacturer to offer an airbag to snowmobilers capable of providing trauma protection.

In an emergency, only the Protection Airbag System unfolds protectively around the head, neck and chest area, increasing your chances of survival in two respects: offering the best possible protection from burial and from life-threatening trauma injuries.

Trauma Protection Head on Top Increased chance of survival

2 0 2 0 / 2 1 D E A L E R C ATA L O G U E

19

THE ABSOLUTE BEST IN AVALANCHE SAFETY.

POWERFUL SEARCH. EASY HANDLING. FAST RESCUE. Performance brings benefits only if the user can tap into it as simply as possible. Mammut has created a revolutionary operating system in the Barryvox, from front to back. From an easy-to-read display to buttons that can be operated even wearing gloves, shock-proof and break-proof housing, intuitive acoustic search guidance and a revolutionarily simple visual interface, the BarryvoxÂŽ shows that powerful performance does not need to be complicated.

MAMMUT 2020

BARRYVOX® AND BARRYVOX® S 1. Design: ergonomic design, impact-proof and break-proof. Can be operated wearing gloves 2. Display: display with background lighting, easily understandable even when wearing polarized glasses 3. Visual interface: shows the distance, direction and number of buried subjects 4. Acoustic search guidance: allows the rescuer to visually search the avalanche field while listening to audio signals from the device 5. Group test with clear instructions 6. Multiple buried subjects: digital signal processing in the event of several buried subjects 7. Marking function: buried subjects are listed and can be marked 8. Search strip width: effective digital search strip width: 70 meters 9. Receiving bandwidth: digital receiving bandwidth: up to 70 meters 10. Circular receiving field: almost identical receiving bandwidth for the X and Y antennas 11. Reverse direction function to avoid 180-degree search errors 12. Automatic switching from send to search (Auto Revert): if a rescuer does not move for 4 minutes, the device assumes a secondary avalanche and the device switches to SEND mode (motion-sensor controlled) 13. Attachment: including highly functional BarryMount carrying system

MAMMUT

14. Alkaline battery life: around 300 hours on SEND, followed by 1 hour on SEARCH 15. Device tests: automatic self-test, frequency check, and function test 16. W-Link: additional communication channel for better search performance 17. Software: updatable software 18. Fleet management: manage the device fleet via W-Link 19. Operating temperature: -25° to +45° Celsius (-13° to +113° Fahrenheit)

2 0 2 0 / 2 1 D E A L E R C ATA L O G U E

21

One hand operation Easy to operate wearing gloves and with one hand

SafeLock Prevents activation of SEARCH mode in the carrying system

Main switch (OFF, SEND, SEARCH) with SafeLock function to prevent accidental switching off or switching from SEND to SEARCH Large, clearly arranged display

Quickly Adjustable Can be quickly and easily adjusted to the size of the user’s body

BarryLeash Easily secure the Barryvox® to your wrist or the BarryMount while searching

Ergonomic device design for easy handling with clear controls

MAMMUT BarryMount carrying system The BarryMount is a high-quality carrying system for your Barryvox® or Barryvox® S. It is easy to carry, and can be quickly adjusted and opened or closed using one hand. The carrying system almost completely rules out accidental activation of search mode, increasing your safety in the terrain. It protects the device from mechanical damage, whether on tours or during transport. At the end of the season, you can simply wash the carrying system in the washing machine at 30 degrees. Clean and ready to go.

22

M O U N TA I N S P O R T S D I S T R I B U T I O N

Easy and fast operation of the Barryvox® S using a scroll button

FEATURES

Barryvox® S

Barryvox AVALANCHE SAFETY ®

KNOW-HOW

Powerful Search – search strip width of 70 m. Why performance can save lives.

Up to 70 m digital / 95 m analog

POWERFUL SEARCH

Search strip width

70 m digital / 100 m analog

Search strip width of 70 m. Or why performance can save lives 70 m digital

Number of antennas

3

If you measure 3 an avalanche transceiver on its performance, there is one value that stands out: the search strip width.

Batteries (3 x AAA)

Alkaline, Lithium

Larger, circular receiving bandwidths mean that buried transmitters are detected faster, search strips are wider, Alkaline search paths over the avalanche deposit shorter and victims are found faster.

Operating temperature range

-25 °C – +45 °C | –13 °F / +113 °F

-25strip °C –width +45 of °C70 | –13 °F +113 °Fmode) and a reliably usable receiving bandwidth of up to 70 meters, With a search meters/ (digital the Barryvox® is a among the top devices worldwide.

Frequency check

Up to 70 m digital

We insist on maximum performance, because we know:

performance Easy Handling – completely revised user interface. Why simpler is often safer. that saves time saves lives.

User navigation

12 languages

Symbolically

Display

2.2 inch fully graphic dynamic

2.0 inch segment

Acoustic Guidance

The new generation of the Barryvox® has a large, safely usable search strip of 70 meters.

TRANSEIVERS

Maximum range

Group check

This high performance reduces the search path over the avalanche deposit and therefore shortens the search time.

Self test

Speed is a decisive factor in a successful rescue.

Illuminated display Personalization Smart Search. Why direct guidance gets you to your target faster.

Smart Search Auto-Guidance Reverse direction function Multiple burials Marking function

Unmark

Mark

Automatic revert to Send mode

The new generation of the Barryvox® has a large, safely usable search strip of 70 meters.

Rescue SEND

This high performance reduces the search path over the avalanche deposit and therefore shortens the search time.

Pro Search (Analog)

Speed is a decisive factor in a successful rescue.

Advanced search settings Vital data Additional functions for institutions and organizations.

Software Update Configuration changes Fleet management Fleet configuration

MAMMUT

Scrolling in the list of buried subjects

SEARCH STRIP WIDTH OF 70 METERS

Larger, circular receiving bandwidths mean that buried transmitters are detected faster, search strips 24 are wider, search paths over the avalanche deposit shorter and victims are found faster.

With a search strip width of 70 meters (digital mode) and a reliably usable receiving bandwidth of up to 70 meters, the Barryvox® is among the top devices worldwide.

We insist on maximum performance, because we know: performance that saves time saves lives.

Customized startup text and picture Functional test with tester

2 0 2 0 / 2 1 D E A L E R C ATA L O G U E

23

BARRYVOXÂŽ $349.99

BARRYVOXÂŽ S $499.99

Technical Features Type: Digital 3-antenna device Range approx.: up to 70 m Search strip width: 70 m Dimensions: 115 mm x 67 mm x 27 mm Weight: 205 g (including batteries) Batteries: Alkaline (3 x AAA 1,5 Volt) Battery life: Alkaline: At least 300 hours SEND W-Link frequency: 869.8 MHz (Europe) / 916-926 MHz (North America) Transmitting frequency: 457 kHz Standard: EN 300718 Warranty: 5-year Mammut warranty

Technical Features Type: Digital 3-antenna device Range approx.: up to 70 m Search strip width: 70 m Dimensions: 115 mm x 67 mm x 27 mm Weight: 205 g (including batteries) Batteries: Alkaline (3 x AAA 1,5 Volt) Battery life: Alkaline: At least 300 hours SEND W-Link frequency: 8 69.8 MHz (Europe) / 916-926 MHz (North America) Transmitting frequency: 457 kHz Standard: EN 300718 Warranty: 5-year Mammut warranty

2710-00150-1012-1

2710-00140-1012-1

MAMMUT

100% Made in Switzerland, developed and produced in Switzerland

24

M O U N TA I N S P O R T S D I S T R I B U T I O N

BARRYVOX® PACKAGE TOUR $429.99

NIRVANA 25L $149.99

The Barryvox® Package Tour includes all of the traditional pieces of avalanche equipment you need for snowmobiling: inside, you will find the Barryvox® avalanche transceiver, the new, light avalanche Probe 280 Speed Lock and the Alugator Ride SE shovel. The digital 3-antenna Barryvox® avalanche transceiver is distinguished by its extremely simple operation and clear instructions. The carbon Probe 280 is safe and easy to use, even when wearing gloves. And the packing volume is reduced to the minimum with the small, compact Alugator Ride avalanche shovel, which features a blade made of hardened, anodized aluminum.

Features • Aluminum V-frame for good load transfer to the hips while maintaining freedom of movement of the upper body • High-density, 2-layer EVA back padding; hip belt and shoulder straps with stretch fabric cover • Front pocket for avalanche safety equipment • Diagonal and A-frame Ski carrying systems • Snowboard carrier • Stowable helmet carrier with snow protection • Soft-lined goggle compartment • Internal zipper pocket with key clip • Detachable, padded hip belt • Zipper pocket on hip belt • SOS label with emergency instructions • Hydration system-compatible

PACKAGE INCLUDES: • Barryvox®, digital 3-antenna avalanche transceiver • Probe 280 Speed Lock, lightweight carbon avalanche probe • Alugator Ride SE shovel made from hardened and anodized aluminum

2560-00021-0001-1025

2 0 2 0 / 2 1 D E A L E R C ATA L O G U E

MAMMUT

2620-00190-1012-1

25

NEW

ALUGATOR PRO $89.99 2620-00121-2149-1

ALUGATOR RIDE 3.0 HOE/SHOVEL $79.99

Length: Collapsed: 68 cm / Extended: 91 cm

2620-00080-00516-1

Shaft Length: Collapsed: 50 cm

Length: Collapsed: 50 cm / Extended: 90 cm Shaft Length: Collapsed: 50 cm Blade: 27.5 cm x 21.5 cm Weight: 820 g Shovel Positions: SCOOP & HOE

Blade: 28.5 cm x 23.5 cm Weight: 850 g Shovel Positions: SCOOP & HOE Features: • Hardened & anodized aluminum shovel blade

Features:

• Oval telescopic shaft with integrated grip zone

• Certification: UIAA 156 avalanche shovel standard

• Automatic zipper locking for quick, precise guidance during assembly

• Hardened, anodized aluminum shovel blade

• Ergonomically shaped T-grip for ideal transfer of strength

• Automatic zipper locking for quick, precise guidance during assembly

• Space-saving blade design

• Ergonomically shaped D-grip for optimum shovel control

• Stabilization ribs for maximum rigidity

• Space-saving blade design

• Sharpened, tilt-resistant blade with integrated steps

• Stabilization ribs for maximum stability

• Straight blade back – perfect for cutting straight snow profiles

• Sharpened, tilt-resistant blade with integrated steps

• Attachment holes for snow anchor and rescue sled

• Straight blade back - perfect for cutting straight snow profiles

• Oval telescopic shaft with integrated grip zone

• Attachment holes for snow anchor

ALUGATOR RIDE $54.99

ALUGATOR PRO LIGHT $79.99

Length: Collapsed: 61 cm / Extended: 86 cm Shaft Length: Collapsed: 44 cm Blade: 27.5 cm x 21.5 cm Weight: 695 g Shovel Positions: SCOOP

Length: Collapsed: 61 cm / Extended: 86 cm

Features:

Features:

2620-00101-2149-1

2620-00140-2149-1

Shaft Length: Collapsed: 44 cm

MAMMUT

Blade: 27.5 cm x 24 cm Weight: 630 g Shovel Positions: SCOOP

• Hardened & anodized aluminum shovel blade

• Hardened, anodized aluminum shovel blade

• Oval telescopic shaft with integrated grip zone

• Oval telescopic shaft

• Automatic zipper locking for quick, precise guidance during assembly • Ergonomically shaped T-grip for ideal transfer of strength

• Automatic zipper locking for quick, precise guidance during assembly

• Space-saving blade design

• Ergonomically shaped T-grip for efficient transfer of strength

• Stabilization ribs for maximum stability

• Space-saving blade design

• Sharpened, tilt-resistant blade with integrated steps

• Stabilization ribs for maximum stability

• Straight blade back – perfect for cutting straight snow profiles

• Sharpened, tilt-resistant blade with integrated steps

• Attachment holes for snow anchor

• Straight blade back - perfect for cutting straight snow profiles • Attachment holes for snow anchor and rescue sled

26

M O U N TA I N S P O R T S D I S T R I B U T I O N

NEW

NEW

280 SPEED LOCK $69.99 2620-00120-2149-1

CARBON 280 SPEED LOCK $99.99

2620-00100-2149-1

Length: Collapsed: 45 cm / Extended: 280 cm Tensioning System: Speed Lock System Diameter: 11 mm Segments: 7 Weight: 275 g Features:

Length: Collapsed: 45 cm / Extended: 280 cm Tensioning System: Speed Lock System Diameter: 13 mm Segments: 7 Weight: 280 g Features:

• Stable, lightweight probe segment made from high-quality carbon

• Stable, lightweight probe segment made from durable aluminum

• Extremely precise probe scaling on both sides

• Extremely precise probe scaling on both sides

• Durable tensile tensioning cord for maximum stability of probe tensioning system

• Durable tensile tensioning cord for maximum stability of probe tensioning system

• Drop-shaped probe tip for energy-saving probing

• Drop-shaped probe tip for energy-saving probing

• Suitable for use with gloves

• Practical probe cover with integrated emergency plan

• Suitable for use with gloves

• Practical probe cover with integrated emergency plan

240 SHORT $54.99

320 FAST LOCK $79.99

Length: Collapsed: 38 cm / Extended: 240 cm Tensioning System: Telescopic Lock Diameter: 11 mm Segments: 7 Weight: 245 g Features:

2620-00181-2149-1

Length: Collapsed: 45 cm / Extended: 320 cm Tensioning System: Fast Lock System Diameter: 13 mm Segments: 8 Weight: 360 g

MAMMUT

2620-00261-2149-1

Features:

• Telescopic locking – reliable, effective tensioning system

• Stable, lightweight probe segment made from durable aluminum

• Stable, lightweight probe segment made from durable aluminum

• Extremely precise probe scaling on both sides

• One-sided probe scaling

• Durable tensile tensioning cord for maximum stability of the probe tensioning system

• Durable tensile tensioning cord for maximum stability of the probe tensioning system

• Suitable for use with gloves

• Drop-shaped probe tip for energy-saving probing

• Practical probe cover with integrated emergency plan

• Drop-shaped probe tip for energy-saving probing

• Suitable for use with gloves • Practical probe cover with integrated emergency plan

2 0 2 0 / 2 1 D E A L E R C ATA L O G U E

27

CFR was started in 1999 by dedicated shredder Dave Basterrechea.

Dave started snowboarding in 1987 and was instantly hooked. Snowboarding took Dave all over the world competing and filming until he landed in Whistler BC Canada in 1997. Dave started using snowmobiles to get into the backcountry to go snowboarding that year.

Snowmobiling quickly became the way to get into the Mountains and access the amazing terrain surrounding the Whistler BC area.

Carrying your snowboard in your back pack was the only way to carry your snowboard back then.

Dave felt that carrying his snowboard on his back was getting in the way of his snowmobiling, especially when tandeming up with another person. Dave built a prototype snowboard rack for his snowmobile in the summer of 1999 and began testing that winter. The design worked. Soon Dave realized that skiers needed racks to carry there skis and poles. In 2000 Dave built a rack for skis as well. The CFR snowboard and ski racks were the first snowboard and ski racks available on the market.

In 2011 Dave was not happy with the stock handlebars on his snowmobile. They bent easy and he couldnâ&#x20AC;&#x2122;t find the sweet spot on them.

After trying all of the other handlebars on the market he decided to design his own. This started the snowmobile control division of CFR. With feedback from all of his team riders a line of signature bars and the flagship Boondocker bar were born. This will be the 4th year of production in handlebars and we have changed them every year to keep tweaking bends,rise and widths. The quest for the perfect handlebar has begun. All of the products have been tested in some of the most demanding conditions by snowmobilers,skiers and snowboarders. Bumped out icy trails in the morning and accidental rollovers with Hundreds of hours getting used and abused. CFR products are built to last.

CFR 28

M O U N TA I N S P O R T S D I S T R I B U T I O N

NEW MOTO BARS The new CFR Hard Enduro bar is designed to be able to take anything you can throw at it. Made from 7075 aerospace aluminum that is both strong, yet damp, which allows for ultimate control and feel of what’s going on under the tires. The H.E bar comes in three different heights to satisfy whatever rise you prefer.

• 1 1/8” Clamp Diameter (Requires “Oversized triple clamps or bar mounts) • Constructed from 7075 Aerospace Aluminum • Anodized black finish for long lasting good looks • Available in 3 different graphic colorways • Knurled left slide to prevent grip from slipping.

• Includes high density foam pad.

AVAILABLE COLORS:

BLACK/RED - 1” CFR-CD100 BLACK/RED - 2” CFR-CD101 BLACK/RED - 3” CFR-CD102 BLACK/WHITE - 1” CFR-CD103 BLACK/WHITE - 2” CFR-CD104 BLACK/WHITE - 3” CFR-CD105 BLACK/ORANGE - 1” CFR-CD106 BLACK/ORANGE - 2” CFR-CD107 BLACK/ORANGE - 3” CFR-CD108

BOONDOCKER 2.0 BAR $129.99

AVAILABLE COLORS: FLAT BLACK CFR-CD01.5 BLOOD RED CFR-CD3.6 HOT PINK CFR-CD12 GHOST WHITE CFR-CD03.5 BABY BLUE CFR-CD3.8 ORANGE CFR-CD3.7

PURPLE CFR-CD3.4

GREEN CFR-CD3.9

RAW CFR-CD3.3 GUN METAL GREY CFR-CD3.15

• 30” Width • 14° Pullback

2 0 2 0 / 2 1 D E A L E R C ATA L O G U E

CFR

HARD ENDURO BAR $119.99

29

H A N DLE BA RS

MUNSTER BAR $129.99

AVAILABLE COLORS: BLACK CFR-CD99 RAW CFR-CD99.1 PINK CFR-CD99.2

• 2” Rise • 29” Width • 14° Degree pull back • QR Technology

Made From 7075 heat treated super Aluminum with flex technology. Better positioning than stock bars and way stronger! The cutting edge bends dissipate bumpy conditions better than stock bars keeping you fresh and riding longer!

CB BAR $129.99

AVAILABLE COLORS: FLAT BLACK CFR-CD40 GHOST WHITE CFR-CD40.1 BLOOD RED CFR-CD40.2

• 28.5” Width • 5” Rise • 11° Pullback • 6° Bend Up

The 7/8” bar with 5” up-sweep works great as a factory bolt-on upgrade.

The bend creates the rise so no riser is needed for riders who like 5” of rise on their handlebar set up.

ROOSTER 2.0 BAR $119.99

AVAILABLE COLORS: BLACK CFR-CD300 PINK CFR-CD301

CFR

The 2020 Rooster 2.0 Bar is the next generation of the original Rooster Bar. The oversized 1 1/8” clamp along with the 7075 aluminum create a strong, yet damp feeling handlebar.

The 28” width is designed for riders with narrower shoulders or riders who wanted a narrower handlebar that was not available. The flat space still allows enough room for all of your controls and brake lever.

30

M O U N TA I N S P O R T S D I S T R I B U T I O N

• 1 1/8” Clamp • 28” Width • 0° Rise • 0° Bend • 12° PullBack

H A N DLE BA RS

SX SNOWBIKE BAR $129.99

AVAILABLE COLORS: FLAT BLACK CFR-CD41 YELLOW CFR-CD41.2 ORANGE CFR-CD41.3

AVAILABLE COLORS: MONSTER GREEN CFR-CD13 BLACK CFR-CD13.7 WHITE CFR-CD13.8 PURPLE CFR-CD13.3

GOLD CFR-CD13.9 RED CFR-CD13.6 RAW CFR-CD13.10

• 1 1/8” Diameter • 31” Width • 3” Rise • 8° Bend Up • 14° Pullback

• 1” Rise • 30” Width • 14° pull back • QR Technology

The evolution of the Turcotte handlebar is upon us now in its 5th season. When Brett switched over to Polaris he needed a new handlebar to work with the different dynamics of his new whip. We went to the drawing board and lowered the rise to 1” because of the higher steering post design on the Polaris and narrowed the handlebar to 30” wide to Brett’s liking.

CROW BAR $109.99

AVAILABLE COLORS: FLAT BLACK CFR-CD15

GHOST WHITE CFR-CD15.1 BANANA YELLOW CFR-CD15.2 ORANGE CRUSH CFR-CD15.3 RAW CFR-CD15.4

• 7/8 Diameter • 30” Width • 1” Rise • 14° pull back • 7° up bend • 37° bar ends • 10° Forward bend on hooks • Made from Hi-Grade 70-71 Aluminum

2 0 2 0 / 2 1 D E A L E R C ATA L O G U E

CFR

BRETT TURCOTTE BAR $129.99

BLUE CFR-CD41.4 RAW CFR-CD41.5

31

H AN DLE BAR AC C ES S ORIES

BAR PAD $24.99 The CFR Bar Pads are designed to fit all CFR Handlebars or any oversized large diameter handlebars. The dual density foam will protect against sharp corners and hardware on riser.

The Cordura material with CFR logo is long lasting and can withstand cold temps and all of the abuse that comes with snowmobiling. The CFR Bar pad comes in black with a colored logo.

HANDLEBAR GRIPS $29.99

CFR

AVAILABLE COLORS: BLACK CFR-CD20 RED CFR-CD21 GREEN CFR-CD24 ORANGE CFR-CD22 YELLOW CFR-CD23 WHITE CFR-CD26 HOT PINK CFR-CD27 PURPLE CFR-CD2.2 BLUE CFR-CD2.5

32

AVAILABLE COLORS: GHOST WHITE CFR-CD30 BLOOD RED CFR-CD30.1 MONSTER GREEN CFR-CD30.2 HOT PINK CFR-CD30.3 BABY BLUE CFR-CD30.4 PURPLE CFR-CD30.5 GOLD CFR-CD30.6 POLARIS ROUND CFR-CD30.7 BLACK OUT CFR-CD30.8

BAR PAD MINI $24.99 The newly designed CFR Bar Pad has a sleeker, meaner and softer design to fit all CFR Handlebars and oversized adapters. The Dual Density foam will protect you against sharp corners and riser hardware. The foam is covered with a Cordura that has CFR rubber logos sewn on. The Cordura material with stitched logos is long-lasting and can withstand pretty much almost anything.

AVAILABLE COLORS: BLACKED OUT CFR-CD31 BLUE CFR-CD31.4 GREEN CFR-CD31.6 ORANGE CFR-CD31.5 PINK CFR-CD31.2 PURPLE CFR-CD31.7 RED CFR-CD31.3 WHITE CFR-CD31.1

• 8” diamond grip surface • Compatible with hand warmers • Fits with tapered, steel & hooked bars • Sold by the pair

M O U N TA I N S P O R T S D I S T R I B U T I O N

SIGNATURE GRIP $32.99 We are happy to release the new CFR signature grip. The new grip’s graphics are designed to provide superior grip with minimal snow and ice buildup. The graphics solid and raised sections provide superior comfort and traction so your hands stay right where you want them.

AVAILABLE COLORS: BLACK CFR-CD200 • Length: 6 1/4” • Diameter: 7/8”

KNUCKS RISERS $129.99

AVAILABLE COLORS: BLACK, BLUE, GOLD, PURPLE • • • • •

CNC machined from high strength 6061 - T06 aluminum Graphics are laser etched for a durable, long-lasting look Will work with either 1-1/8” tapered bar or 7/8”bars (Adapter included) Patent pending 7/8” anti slip insert keeps bars where you want them Must have a pivot-style steering post or a double-pivot adapter

SIZE 1.25”

2"

3”

4”

Color BLACK BLUE GOLD PURPLE BLACK BLUE GOLD PURPLE BLACK BLUE GOLD PURPLE BLACK BLUE GOLD PURPLE

PART #

SIZE

Color

PART #

CFR-CD60 CFR-CD60.1 CFR-CD60.2 CFR-CD60.3 CFR-CD29 CFR-CD29.5 CFR-CD29.1 CFR-CD29.2 CFR-CD28 CFR-CD28.5 CFR-CD28.6 CFR-CD28.7 CFR-CD07 CFR-CD07.5 CFR-CD07.1 CFR-CD07.2

5”

BLACK BLUE GOLD PURPLE BLACK BLUE GOLD PURPLE BLACK BLUE GOLD PURPLE BLACK BLUE GOLD PURPLE

CFR-CD08 CFR-CD08.5 CFR-CD08.1 CFR-CD08.2 CFR-CD09 CFR-CD09.5 CFR-CD09.1 CFR-CD09.2 CFR-CD10 CFR-CD10.5 CFR-CD10.1 CFR-CD10.2 CFR-CD11 CFR-CD11.5 CFR-CD11.1 CFR-CD11.2

6”

7”

8”

HANDLEBAR HEATERS $54.99 CFR-CD18 AVAILABLE COLORS: BLACK, BLUE, GOLD, PURPLE CFR-CD17 • Universal Fit • Allows oversized 1 1/8” snowmobile handlebars to be fastened to stock 7/8” snowmobile clamp • Teardrop design prevents shearing

Color

PART #

BLACK BLUE GOLD PURPLE

CFR-CD17 CFR-CD17.5 CFR-CD17.1 CFR-CD17.2

• Universal high powered heaters that work on all snowmobiles • Three-wire universal grip heater element kit with high/low temperature features • Easily installed with 3M® self-adhesive backing tape • Extended hook design extends over the hook of the bar to heat the back portion of the handlebar as well as the flat hand area • A must when using aluminum handlebars to keep grips hot • Works with all 12V snowmobiles • Sold by the pair

MOUNTAIN STRAP ADAPTER $49.99 CFR-CD50.1 The CFR Mountain Strap Adapter allows you to attach your Ski Doo Mountain strap (2017-CURRENT) directly to the top clamps of your knucks risers for more of a stock look.

2 0 2 0 / 2 1 D E A L E R C ATA L O G U E

CFR

OVERSIZE BAR ADAPTER $54.99

33

AC CES S ORIES

TUBE ADAPTER $24.99 CFR-CD19

RIGID MOUNTAIN STRAP $79.99

• 5-1/2” tube converts stock flat-style steering post to a pivot-style steering post • Made of super-strong Chromoly steel with anodized black finish • Attaches to stock handlebar clamps or any 7/8” handlebar attachment • Positions pivoting-style risers on outside of stock handlebar clamps.

CFR-CD16.5

• The new CFR Rigid Mountain Strap allows a solid grab handle for tricky manuevers and tandem snowmobiling.

• The two forged bar nuts attach the strap to the handlebars for a solid connection with out slippage.

MOUNTAIN STRAP $54.99 CFR-CD16

• Mounts to most handlebars to allow a spot to grab for tricky manoeuvres or tandem snowmobiling

OTHER ACCESSORIES POLARIS MOUNTAIN STRAP $44.99 CFR-CD16.1

• The 12” Fabcraft Polaris handlebar Mountain Strap works flawlessly with the Chris Brown Signature Handlebar.

CFR CONNECT SYSTEM $89.99 CFR-C01

CFR

• Provides ability to easily remove/attach iRack • 4 Stainless steel buckles lock your rack down to your snowmobile tunnel • Permanent Mounting points on snowmobile are low profile stainless steel loops • Going lightweight and low pro drop the rack and go • CFR Connect system only works with the CFR iRacks and on Ski Doo XP/XM model snowmobiles with a 146” tunnel or longer

34

ARCTIC CAT ADJUSTABLE POST DELETE KIT $74.99 CFR-CD25

• Allows you to use your stock Arctic Cat steering post, but removes the height adjustable feature • Simply cut below adjustable part of steering post and install the new T-style billet block • Eliminates 90% of the slop from the stock adjustable post and saves up to 1lb in weight • Requires a riser of any height

M O U N TA I N S P O R T S D I S T R I B U T I O N

PRODUCT

PART #

CFR Tunnel Armour CFR Scrapers CFR Super Straps CFR Super Straps 8" Replacement 16" Replacement Strap 220mm Ladder Strap Aluminum Ratchet Bar Nuts

CFR-1014 CFR-1012 CFR-1013 CFR-1013.5 CFR-1001 CFR-1002 CFR-1003 CFR-1006 CFR-CD50 CFRCD28.0 CFRCD28.1 CFRCD28.1 CFR-ST02 CFR-TR7.2 CFR-TR7.1

SkiDoo Gen4 Cluster Relocate SkiDoo XM Cluster Relocate Knucks Riser Cluster Relocate XL Stickers - 9” x 8” LinQ Fastener LinQ Cargo Base Kit

MSRP $19.99 $9.99 $13.56 $15.96 $6.40 $8.00 $4.00 $16.00 $24.99 $54.99 $54.99 $54.99 $9.99 $49.99 $49.99

H ATS Otto Cap flat brim hats with sweatband insert for a comfy fit. One size fits all.

BLACK HAT W/ WHITE LOGO $29.99 CFR-SG07.11

BLACK HAT W/ PINK LOGO $29.99

CFR-SG07.14

BLACK HAT W/ BLUE LOGO $29.99 CFR-SG07.12

GREY HAT W/ GOAT SKULL $29.99 CFR-SG08.12

BLACK HAT W/ RED LOGO & METALLICA FONT $34.99

CFR

CFR-SG10.0

2 0 2 0 / 2 1 D E A L E R C ATA L O G U E

35

STORAGE

T U N N El R A C KS LINK-IT-UP RACK $289.99

The QP Bag offers 25 liters of waterproof carrying capacity and fits snugly in all of the CFR rack systems. The QP is a telescoping bag that doubles in size with a quick zipper extension to carry up to 50 liters of gear.

QP BAG $109.99 CFR-B02

• Waterproof zippers and Cordura waterproof fabric • 25 liter capacity. Un-zip the extension and up to 50 liters of capacity are possible • Clips right into all CFR rack systems and is easily removable • Shovel holder on the top enables a shovel to be carried on the deep days for quick access • Convenient carrying handle • Individual inside pocket

The CFR Dime Bag has Velcro strips that wrap around the CFR DD, i and Mountain Racks’ tubular bars in four spots to keep the bag locked into place.

• 10 L of waterproof carrying capacity • 3 layer laminate construction with waterproof zippers • Built in Velcro straps secure the Dime Bag nice and tight • Designed specifically to be used in CFR DD, i and Mountain Racks • Inside pocket for holding wallet and other valuables • Attached key hook keeps keys in a safe place.

• CFR Snow/Ice scraper included

DIME BAG $89.99 CFR-B01

Using the CFR handlebar bag lets you empty your jacket and pant pockets keeping all of your go to stuff in one go to spot.

CFR

BUCK BAG $89.99 CFR-B03

36

• Ripstop waterproof fabric and waterproof zippers • 7 external pockets, 2 internal pockets • External pockets ready for OEM heater bars (heaters not included) • 9” of clearance is needed on XM sleds between top of bag and DESS switch

M O U N TA I N S P O R T S D I S T R I B U T I O N

FLAT BLACK CFR-TR07

GHOST WHITE CFR-TR07.5

The new CFR LINK-IT-UP® Rack is the latest evolution in our rack making technology.

The LINK-IT-UP® Rack enables you to put on or take off your rack using the Ski-Doo LinQ removable brackets. All CFR bracket kits and bags work on the LINK-IT-UP® rack. * Ski-Doo LinQ cargo base kit and Fastener Brackets sold separately.

MOUNTAIN RACK $189.99 FLAT BLACK CFR-TR04 Designed by snowmobilers Dan Treadway, Rob Alford and Chris Brown • Total rack height is only 3 3/4” • Extremely strong and light weight 3/4” structural tubular aluminum.

• Carries up to a 20L/6 gallon gas jerry can • Carries up to two pairs of skis, snowboards or pow surfers with proper attachments • Compatible with CFR Dime and QP Bag • All mounting hardware is made from high grade stainless steel • 1 Pound lighter than the CFR iRack yet still as strong • 3/4” Lower than the CFR iRack

iRACK 2.0 $199.99 FLAT BLACK CFR-TR06 We added the low profile lightweight design of the Mountain Rack for a lower center of gravity and 1 pound weight savings. The CFR Connect system enables the rack to be taken on and off with no tools. (Sold separately and only available on Ski Doo XM and XP snowmobiles). Can also be installed using the LINK factory holes that come pre drilled on 2013 and newer Ski Doo snowmobiles.

• All snowboard and Ski brackets kits can be used • Compatible with CFR Dime and QP Bag • Extremely strong and lightweight 3/4” structural tubular aluminum • Carries up to a 20L 6 G fuel container • Carries up to 2 pairs of skis/snowboards with proper attachments (Sold Separately) • Mounts to most snowmobiles with a 141” track or longer • 1 LB Lighter and 3/4” lower than original iRack.

EXPEDITION RACK $299.99 FLAT BLACK CFR-TR05 The Expedition Rack carries twice as much as all of our others racks. This rack is great for people wanting to carry lots of extra gear.

• Carries 2 X 20L gas cans • Designed for sleds with 154” tracks or longer • CFR Blades recomended

BR ACK E T SYSTE M S ( D I R ECT TUNNE L M OU N T)

B R A C K ET K I T S SNOWBOARD BRACKET KIT $127.99

CFR BRACKET SYSTEMS AND BRACKET KITS

BLACK CFR-K01-B RED CFR-K01-R

• Ratchets and ladders are custom made for superior ratcheting • Nylon brackets are lightweight, strong and capable of temperatures down to -100 degrees • Injection molded straps can withstand -100 degree temperatures, but will break in a severe rollover in order to prevent damage to your equipment • Bracket kits are specifically made to fit CFR iRacks and Mountain Racks • All mounting hardware is included and is made from high-grade stainless steel that won’t rust

• Carries 1 snowboard. Another Bracket Kit can be purchased to carry 2 snowboards • Professionally used and approved by snowboarders Travis Rice, Mark Carter, Mark Landvik and Annie Boulanger

DUAL SKI BRACKET KIT $127.99 METAL SNOWBOARD BRACKET SYSTEM (DTM) $159.99 BLACK CFR-M01-B • Used by Pro Snowboarders Eric Jackson, Bjorn Leines & Mads Johnson • Metal Snowboard Rack System carries 1 snowboard on the side of most snowmobiles • Another snowboard can be carried by purchasing another Metal Snowboard Rack System

BLACK CFR-K02-B RED CFR-K02-R

• Carries one pair of skis and poles. Another DualSki Bracket Kit can be purchased to carry up to two pairs of skis • Professionally approved by Skiers Dan Treadway, Ian McIntosh, Dana Flahr, Seth Morrison and Sage Cattabriga-Alos

BOARDSKI BRACKET KIT $149.99 CFR-M02 • Metal Ski Bracket System carries one ski and pole on each side of most snowmobiles. (No other rack required) • A cost effective way of carrying a pair of skis and poles on your snowmobile

BOARDSKI BRACKET SYSTEM (DTM) $189.99 BLACK CFR-M03-B RED CFR-M03-R • The CFR DTM Boardski bracket bolts to the side of most snowmobiles (Does not work on 07 and newer Polaris snowmobiles) or Ski-Doo Summit ‘04-’07 • Carries either a pair of skis and poles or a snowboard • Another DTM Boardski Bracket System can be purchased to carry up to two skis and or snowboards

• Carries one pair of skis/poles or one snowboard • Another DualSki Bracket Kit, BoardSki Bracket Kit, PowSurf Bracket Kit or Snowboard Bracket Kit can be used on other side of rack

POW SURF BRACKET KIT $127.99 BLACK CFR-K05-B RED CFR-K05-R • Carries one snowboard or Pow Surf Board • Professionally used and approved by Grassroots Founder Jeremy Jensen

2 0 2 0 / 2 1 D E A L E R C ATA L O G U E

CFR

METAL SKI BRACKET SYSTEM (DTM) $189.99

BLACK CFR-K04-B RED CFR-K04-R

37

MOUNTAINSPORTSDISTRIBUTION.COM 802 9 STREET N, GOLDEN, BRITISH COLUMBIA, CANADA V0A 1H2 1.888.987.7533 (SLED)