SUPAFEND® DOCK WHEELS
Type A Single Bracket
376002
High Impact Nylon Hubs
376006
Supafend® Dock Wheels are designed to protect and guide your boat while manoeuvring in and out of your marina berth. This product is best located on the corner or “blind spot” and many boat owners are also locating them at intervals up the length of their marina. Their capacity to protect and move with your boat is unrivalled.
The unique closed-cell PU foam formulation and injection technique was designed exclusively for Supafend by the worlds leading global PU Foam specialist corporation. This has ensured correct internal dispersion and adhesion of the foam to the PVC wheel while producing optimum cushioning. Dock Wheel hubs are made of Dupont Supertuff Zytel Nylon that will not corrode or crack and does not require bearings, bushings or any form of lubrication. They are hard-wearing and will not seize against its axle.
Part No. Width 376002 210mm 376006 140mm
Diameter 350mm 350mm
Weight 6.5kg 4.5kg
Includes Wheel and Bracket Wheel only
Single Wheel Bracket (designation Type-A) suited to most vessels up to 40 feet, it is designed and manufactured from Galvanized Steel for strength, multi-fit fixing, and anti-corrosive qualities. The PVC wheel can be removed/reinstalled easily and securely into its axle via a unique injection molded Nylon Cap. The Multi-Fit base plate with slotted bolting pattern enables it to be fixed simply to the top surface of most wooden marinas, including various “multi-layered” plank configurations. Four large galvanized coach screws are supplied with the Dock Wheel.
SUPAFEND® DOCK FENDERS Supafend® Dock Fenders are “one-piece” rotationally molded, manufactured from the same exceptionally strong UV stabilized, non-marking PVC material used in our Dock Wheel. This design incorporates eleven lugs for permanent fixing with eleven stainless steel TEK screws supplied with each fender. This product is supplied fully inflated at 1 psi and this characteristic of low inflation progressively increases internally with any roll-on or contact from your boat, providing the ultimate in marina protection - 24 hours per day! If required, they can be simply reinflated with a sportsball pump and inflation needle. New & Improved Supafend Corner Fenders are the exact matching complement to Supafend® Dock Fenders with the added benefit that they are now foam-filled for maximum protection. They are injected with the same formulation used in our Dock Wheels which was exclusively developed for Supafend® by a world-leading company specializing in closed-cell PU foam. These corner fenders provide smart and continuous fendering along your marina berth when fitted together with Supafend Straight Dock Fenders. 338mm
376024
376022
Accessories for Inflatable Boats
The wheel is non-marking and consists of a sealed one-piece rotationally molded tyre made of Marine Grade PVC with special ultra-high UV resistant additives to prevent perishing under our severe Southern Hemisphere sunlight and climate.
338mm
376032
Supafend® Corner Fender options are: • Straight • 90 degree - right angle bend, suited for many marinas, pontoons and jettys • 135 degree - suitable to waler corners with this external angle For the ultimate in protection, both corner fenders are able to be fitted in conjunction with a Supafend® air-filled Dock Wheel! Part No. 376024 376022 376032
Length 980mm 676mm 676mm
Height 150mm 150mm 150mm
Width 105mm 105mm 105mm
Type Straight Corner 90 degree Corner 135 degree
Supplement Catalogue
P.1