Sam Allen Deck fittings

Deck Fittings & Hardware

Deck Fittings & Hardware

STAINLESS STEEL LOUVRE VENTILATORS

STAINLESS STEEL ROUND LOUVRE VENTILATOR

30501

Part No. 30510 30515

30507

Size 100mm x 100mm 130mm x 130mm

30504

PLASTIC AIR VENTILATOR Manufactured in white ABS plastic material.

Complete with anti-bug net.

30505

30506

Part No. Length Width Shape Colour 29932 250mm 90mm Rectangular White 29934 100mm 100mm Round White

Part No. 30501 30504 30505 30506 30507

AIR VENTILATOR WITH HOSE TAIL Manufactured in white ABS plastic material. with hose tail to suit 75mm ventilation hose.

Part No. Length Width Shape 29930 90mm 90mm Square

Colour White

LOUVER VENTILATOR Manufactured in plastic material. Available in Black or White

Part No. Length Width Colour 29936 260mm 125mm Black 29938 260mm 125mm White

Length Width Height 325mm 112mm 27mm 127mm 115mm 0.8mm 127mm 65mm 0.8mm 230mm 115mm 0.8mm 228mm 127mm 0.8mm

Deck Fittings & Hardware

Deck Fittings & Hardware

ALUMINIUM SCUPPER VENTS The ideal vent for draining the deck of your boat, air pressurizing your caravan, van body or as a vent to allow air flow in. The spring loaded door gives you a good seal when closed.

Part No. 3710 3712 3711 3713 3715 3714

Description Length Width Aluminium Scupper Vent 165mm 112mm White Powder Coated Scupper Vent 165mm 112mm Aluminium Scupper Vent 240mm 148mm White Powder Coated Scupper Vent 240mm 148mm Repair kit, spring & seal to suit 3711 & 3713 Repair kit, spring & seal to suit 3710 & 3712

OVAL TELESCOPIC SCUPPER WITH FLAP

Lid Opening 115 x 63mm 115 x 63mm 188 x 95mm 188 x 95mm

316G STAINLESS STEEL RECTANGULAR HAWSE PIPE

Telescopic Scupper with 5 degree angle which allows total drainage.

Part No. 29906

Part No. 29920

Length 50mm

Description Rectangle

Overall Size 153 x 82mm

Opening Size 100 x 50mm

316G STAINLESS STEEL OVAL HAWSE PIPE

Width Max Depth Colour 150mm 75mm White

SCUPPER VALVE Made from white nylon material with a rubber flap valve that opens to let water out then seals back to prevent water entering.

Supplied with S/S screws.

Part No. 29900 29904

Description Oval Oval

Overall Size 177 x 101mm 239 x 135mm

Opening Size 115 x 40mm 180 x 75mm

316G STAINLESS STEEL TRIANGULAR HAWSE PIPE

Part No. 45486 70mm diameter

STAINLESS STEEL CLAM VENTS Commonly used as anchor well drain covers or for covering thru-transom wiring connections.

Part No. 29903

Description Triangle

Overall Size 203 x 125mm

BAITWELL INTAKE WATER CIRCULATOR

Part No. 30731 30732

Length 40mm 53mm

Width 44mm 54mm

Height 13mm 25mm

Part No. Colour T/S hose 29922 Black &White 3/4” 29924 White 5/8”

Opening Size 125 x 76mm

Deck Fittings & Hardware

NYLON OUTBOARD WELL DRAINS White Nylon Well Drains with push-on end fitting

Part No. 29780 58mm long x 25mm dia 29775 83mm long x 25mm dia 29785 White collar to suit well drains

Deck Fittings & Hardware

HIGH QUALITY “NAIRN” SLOP STOPPERS & TRIM RINGS Part No. 295087 White round slop stopper 295088 Black round slop stopper 295085 White round panel grommet / trim ring 295086 Black round panel grommet / trim ring 295090 Black oval slop stopper 295084 Black oval panel grommet / trim ring

PLASTIC DRAIN SOCKETS Made from white plastic. All drain sockets to suit snap handle bung below 23133.

23130 with 28mm barbed tail.

Part No. 23131 62mm x 33mm 23130 100mm x 33mm 23132 155mm x 33mm

SNAP HANDLE BUNG Expanding Snap Handle Bung made of plastic material Part No. 23133

23134

23137

23mm (Suits above drain sockets) 35mm 40mm

BLACK PLASTIC BUNGS 25mm cutout, ID hole 19mm 23632 - Black Assembly 23632B - Black Bung only 30mm cutout, ID hole 23mm 23634 - Black Assembly 23634B - Black Bung only

BLACK PLASTIC BUNGS High flow nylon drain plug.

40mm cutout, ID hole 30mm 23635 - Black Assembly 23635B - Black Bung only 23636 - White Assembly 23636B - White Bung only 50mm cutout, ID hole 40mm 23638 - Black Assembly 23638B - Black Bung only 23640 - White Assembly 23640B - White Bung only

RUBBER BUNGS - BLACK Suitable for plugging bung hole sizes ranging from 10mm to 25mm. Sold in packs of 25 Part No. 23104 23106 23108 23110 23112 23114 23115

10mm Size 4 12mm Size 5 15mm Size 6 17mm Size 7 19mm Size 8 22mm Size 9 25mm Size 10

20mm COARSE THREAD DRAIN BUNGS Drill Hole 25mm Part No. 23140

Chrome Plated Base 20mm Plastic plug with chrome plated base complete

23135

Stainless Steel Base 20mm Plastic plug with stainless steel base complete

All Plastic 20mm Drain Bungs 20mm Coarse thread plug and base complete with White nylon washer 23144 23144B with Blue nylon washer Spare Parts T/S Coarse Thread 20mm Bungs 23142 20mm Coarse thread plug only 23142W White nylon washer T/S 20mm plug

NAIRN DRAIN BUNGS 30mm Coarse Thread Drain Bungs with 40mm drill hole Part No. 23148

23149 23149W

30mm Coarse thread plug & base complete 30mm Coarse thread plug only White nylon washer T/S 30mm plug

FINE THREAD DRAIN BUNGS High quality 20mm Fine Thread Drain Bungs with 25mm drill hole and stainless steel spring.

Part No. 235110 235108 235109 235113

Black drill hole 25mm Black replacement bung White drill hole 25mm White replacement bung

COARSE SELF DRAINER

Part No. 23143

Coarse Self Drainer Bung 25mm

Deck Fittings & Hardware

Deck Fittings & Hardware

316G HEAVY DUTY S/S STRAP HINGES Solid cast 316g stainless steel hinges with a solid S/S pin Sold in pairs

Part No. 29730 29732

Length Width 104mm 26mm 154mm 26mm

Length Ratio 52mm/52mm 77mm/77mm

STAINLESS STEEL 316 G TAKE APART HINGES Heavy Duty left or right hand take apart hinges made from 316 grade polished stainless steel.

Part No. 29758 29759

CAST 316 SS HEAVY DUTY BUTT HINGES

Description Size Left hand hinge 85 x 50mm Right hand hinge 85 x 50mm

316 SS LARGE HATCH HINGES Sold per pair

Sold per pair

Part No. Length 38860 100mm

Width Thickness 100mm 4mm

Part No. Length 38865 132mm

Part No. Length 29731 60mm

Width 60mm

Thickness 4mm

316G STAINLESS STEEL OVAL HINGE

Part No. 29980 75 x 38mm. Thincast. Both barrel ends closed Made from Stainless Steel Grade 316

Thickness 6mm

SS 316 G DUAL PIN HINGE

STAINLESS STEEL 316 G ROUND PLATE DECK HINGE Heavy duty cast 316 grade stainless steel hinge. Sold per pair

Width 115mm

Sold per pair Heavy duty cast 316 grade stainless steel hinge has dual hinge pins to allow a full 180° opening action. It features countersunk holes with a high polish finish for an attractive appearance.

Part No. 29909 41mm x 70mm Sold per pair

316 G STAINLESS STEEL HATCH HINGE

Part No. 29755 76mm x 64mm (3” x 2 1/2”) Made from Stainless Steel Grade 316

CAST 316g STAINLESS STEEL HINGES LOW PROFILE A range of high quality hinges made from 316g S/S, mirror polished. These hinges are very strong yet have an unobstructed low profile, only 3mm thick and fully enclosed hinge pin arrangement (no hinge pins showing) making then very attractive and practical.

Sold in pairs only.

Part No. 29911 29912 29915 29916 29917 29918 29919

Length 38mm 50mm 60mm 76mm 76mm 104mm 52mm

Width 38mm 50mm 38mm 38mm 38mm 38mm 38mm

Length Ratio 19mm/19mm 25mm/25mm 20mm/40mm 20mm/55mm 38mm/38mm 52mm/52mm 16mm/36mm

29911

29912

Offset 29915

10mm

29917 & 29918

29916

29919

Deck Fittings & Hardware

Deck Fittings & Hardware

CLASSIC STYLE STAINLESS STEEL OFFSET HINGES

304G STAINLESS STEEL DOUBLE HINGE

Sold in pairs only. Size = Open Length x Height

304 G Stainless Steel Electro Polished HD Flush Mount Stamped Strap Hinge

Light duty 304 Stainless Steel.

Part No. 29718 70mm L x 55mm W 10mm Offset Ratio 10mm/45mm

Part No. 29725 40mm x 70mm

304G STAINLESS STEEL BUTT HINGES

304G SS PIANO BUTT HINGE ~ Flat 33mm x 2000mm ~ 18 Gauge Material ~ 2mm Pin Drilled ~ 60mm centres ~ 4mm Holes

304 grade stainless steel hinges with fixed pin. Sold in pairs.

Part No. 38550 38700 38850 38100

Part No. L101S 50mm x 40mm 70mm x 50mm 85mm x 60mm 100mm x 75mm

STAINLESS STEEL STRAP HINGES Sold in pairs only. Size = Open Length x Height

LIGHT DUTY STAINLESS STEEL BUTT HINGES Sold in pairs

Part No. 38750 38765 38775

CHROME PLATED BRONZE SEPARATING HINGES Chrome plated bronze seperating hinges sold in pairs

Length Width 51mm (2”) 34mm 63mm (2 1/2”) 40mm 76mm (3”) 48mm

Part No. 29750 55mm x 50mm (2 1/8” x 2”)

304g STAINLESS STEEL HINGES Sold in pairs

Part No. 29724 29722 29713 29720 29715 29711

Length 40mm 53mm 75mm 76mm 87.5mm 130mm

Width 38mm 37mm 40mm 40mm 37.5mm 40mm

TAKE APART HINGE 316 Stainless Steel take apart hinge with spring loaded pin.

Sold in pairs.

World Class Products

29715

Part No. 29751 Length 68mm x Width 32mm x Thickness 3mm

SNAP APART HINGES

29713

29711

29724

Part No. 29728 102mm x 30mm Length Ratio 51mm/51mm

29720

29722

304G STAINLESS STEEL HINGE

Sold each

Part No. Length Width 29374 127mm 47mm

Offset 34mm

Made from glass re-inforced nylon these hinges are sturdy enough to tackle any job. They are ideal for hatch & locker lids that need to removed from time to time as they have a spring loaded trigger release so they can be mounted in both horizontal & vertical applications. * Glass re-inforced Nylon * Stainless Steel Spring * No Tools Required * Use Vertically or Horizntally * 72mm x 52mm Part No. 93660 93662

White - Sold in Pairs Black - Sold in Pairs

Deck Fittings & Hardware

Deck Fittings & Hardware

NYLON BUTT HINGES

SS STEEL BURLEY BUCKET

Quality nylon hinges with a stainless steel pin.

Available in white.

Part No. 35168A 35168B 35168C

Length 51mm 76mm 102mm

Part No. SM144

SM144B

SM158

Width 28mm 41mm 59mm

BLACK PLASTIC HINGE

Heavy duty black plastic hinge.

Part No. 29868 29870

B 40mm 48mm

A D E 40mm 25.5mm 10mm 48mm 12.5mm 30mm

S/S Burley Bucket Height 39cm, Width 18cm Depth 17cm, Weight 2kgs Mounting Brackets T/S S/S Burley Bucket Burley Bucket Chomper in S/S

316SS BURLEY BUCKET This high quality 316g stainless steel burley bucket will withstand the toughest of fishing environments.

Manufactured of 2mm A thick tube and a solid 3mm flange all in 316g, The right amount of holes lets the perfect amount of burley into the ocean, landing you the biggest fish.

B

C

D

World Class Part No. A B C D 49910 Height 49cm 31.2cm 17.8cm Dia 12.6cm Products

CONTOURED NYLON HINGES Manufactured in three sizes, available in black or white, with stainless steel pins. UV stabilized nylon material, contour design for added strength.

Sold in pairs only. Size - Open Length x Height

LIVE BAIT SCOOP Part No. SM129

SM129R

Live Bait Plate & Scoop for Hose Connection Live Bait Plate & Scoop for Pump Connection (Suits Rule 360/500 Pump)

STAINLESS STEEL TABLE BRACKET 29762 & 29768 Part No. 29760 29766 29762 29768 29764 29770

Length 40mm 40mm 58mm 58mm 78mm 78mm

Used to mount tables, shelves, bunks etc onto bulkheads. Can be easily removed.

29766 & 29760 Width 36mm 36mm 36mm 36mm 36mm 36mm

Colour Black White Black White Black White

Part No. 29726 Wall Bracket 84mm x 53mm Table Bracket 73mm x 44mm Sold in pairs 29764 & 29770

QUALITY BOAT LETTERS & NUMBERS Quality “Jac Paper” self adhesive letters & numbers in two sizes. Meets industry standard in size & shape. Already bagged in pairs for your convenience.

Part No. 23100 23100W 23102 23102W

4” (100mm) Black 4” (100mm) White 8” (200mm) Black 8” (200mm) White

STAINLESS STEEL REMOVABLE OUTBOARD BRACKET Stainless Steel rotating outboard motor bracket for swim platforms with a birch ply pad. Rotates 3600.

Fully removable so you can bring it out when you need it. A non intrusive mounting plate remains on the platform when not in use. It also has a quick release nob on top for easier removal.

The 4 bolt mounting plate has 8mm hole diameter Part No. 70300 Max 15 HP. 35kg Engine weight

Deck Fittings & Hardware

Deck Fittings & Hardware

SS REMOVABLE ROD HOLDER Mount Bracket Inside Dia. Tube Length

4 x 3-3/4” 1-5/8” 8-1/2”

HEAVY DUTY FLUSH MOUNT ROD HOLDERS Top Quality Line Heavy Duty Heavy Duty white PVC insert.

Part No. 49140 30 Degree Angle or Straight.

316 Casting Stainless Steel Flange, 4” Diameter 2” 304 Polished Stainless Steel Tube Closed bottom type with 1/2” tube drain tail.

Part No. 49121 Straight 49122 30 degree angle World Class Products

CAST ALLOY ROD HOLDER SS 316 OUTRIGGER POLE HOLDER 30 degree angle - Round Head 10mm dia (4”).

Heavy duty cast 316 stainless steel.

Flush mount.

Use with all outrigger poles with 1-1/8” butt diameter.

Use 1/4” mounting bolts.

Part No. 49124

Our new range of raw cast aluminium products are ideal for Boat Builders as they are designed for welding in place.

Part No. 49432 Dimensions: Oval Top: 105mm L x 85mm W Shaft Length: 240mm Outside Dia: 50mm

World Class Products

ALLOY ROD HOLDER STAINLESS STEEL ROD HOLDERS WITH STORAGE SPACE This high-styled rod holder has a place for your fillet knife, pliers, baits & a convenient shelf for extra line or scents. Stores rods upright. Fabricated from polished 304 stainless steel, with injection molded ABS inserts to protect valuable rods and tools.

Stainless steel mounting hardware included.

Part No. 49132 Double Rod Holder

Length - 11”

Height - 9 1/4”

Depth - 3”

This bright dipped anodised alloy 30o deck mount rod holder with gimble comes complete with a lug for rod security.

Length: 8 1/2” Diameter top: 4” Part No. 49430

304SS ROD HOLDERS Robustly constructed high quality stainless steel rod holders with slimline 60mm diameter head with rolled top for elegant flush mounting. Stainless rod gimbal pin through shaft. Choice of 30 degree World Class angle shaft or straight 90 degree shaft.

Products

World Class Products Part No. 49133 Triple Rod Holder

Length - 13 1/2”

Height - 9 1/4”

Depth - 3”

Part No. 49972 Part No. 49979 Part No. 49299 Angled Shaft - Pair Angled Shaft - each Vertical Shaft - each World Class Products

Head size 60mm x 80mm Bore Size 40mm

Length 215mm Cut out size 45mm

Deck Fittings & Hardware

Deck Fittings & Hardware

SS ROWLOCK ROD HOLDER

SS 304 SIDE MOUNT ROD HOLDER With stainless mounting bracket.

Port & Starboard ( Left & Right handed) Stainless Steel Rod Holders Tube Length - 150mm Shaft Diameter - 10mm Sold in pairs

3/4 BSP female thread for drain.

Part No. 49108

Part No. 49202

STAINLESS STEEL 316G CLAMP ON ROD HOLDER

This clamp-on rod holder has a polished stainless steel tube with a hard plastic liner & a Stainless Steel 316G clamp. Corrosion resistant.

ID 42

Length 235

LARGE OVAL S/S ROD HOLDER Oval Head - Standard with Sealing Cap

All 304g polished S/S complete with plug type hinged black PVC sealing cap, black rubber mounting gasket & solid S/S rod gimbal pin through shaft.

Head size Length Cut hole Shaft ID shaft angle

115mm x 87mm 210mm x 50mm 40mm 30 degree

Part No. 49120

Part No. Suits rails 49128 20mm to 25mm 49129 Suits rails 32mm

World Class Products

ROD HOLDER Plastic/Stainless Steel Side Mount Length - 270mm with solid plastic insert in one end.

Solid plastic mounts can be moved to any length.

Width - 85mm Sold separately

Part No. A 49123 3-3/8”

B 4-1/4”

C 9”

D 30o

ID 1-1/2”

PREMIUM PLASTIC ROD HOLDER with Large Oval Head Robust premium quality, UV stabilised plastic rod holder with large, heavy duty oval shaped head, shaft angled to 30 degrees and built in rod gimble.

Part No. 49200

ROD HOLDER Universal Side Mount - Nylon High quality UV stabilized rod holder with moulded gimble in base.

Mounting Bracket -134mm x 75mm Length - 235mm x Shaft ID - 43mm Sold separately Part No.

CAST 316 SS FLUSH MOUNT ROD HOLDER WITH CAP

49218 White 49216 Black

Head size Length Cut hole size Shaft ID

86mm x 58mm 235mm 50mm 43mm

Part No. 49220 White 30o Angled Shaft 49222 Black 30o Angled Shaft UV Stabilised Sealing Cap T/S Oval Shaped Head Rod Holders 49230 White 49232 Black

Deck Fittings & Hardware

Deck Fittings & Hardware

ALLOY ADJUSTABLE ROD HOLDERS Adjustable clamp on rod holder fits pipe size 25mm - 50mm.

Made from Quality Polished anodised Aluminium with Internal locking positions which turn every 180 to adjust the angle of attack. Easy installation with an Allen Wrench.

Available in Silver or Gold.

STAINLESS STEEL ROD HOLDER

Part No. SM130 Angled Rod Holder SM130S Straight Rod Holder SM130R Righthand Clamp to Vertical Rail. Max Rail size 20mm SM130RH Righthand Clamp to

Horizontal Rail.

Max Rail size 20mm

ADJUSTABLE ABS PLASTIC ROD HOLDER World Class Products

Robustly constucted rod holder with full ratchet style adjustment up/down & side to side. It has a reccess for the rod reel to sit in & a clip to lock the rod into the rod holder.

Part No. 49420 Fits pipe size 25mm-30mm Silver 49421 Fits pipe size 25mm-30mm Gold 49423 Fits pipe size 40mm-50mm Gold 49424 Fits pipe size 40mm-50mm Silver

NYLON DRAIN Made from Black Nylon to suit a 2” Rod Holder.

Body ID: 2” Tail ID: 7/16” Part No. 49645

NYLON ROD HOLDER INSERTS High quality UV stabilised nylon inserts for rod holders.

Ideal for rocket launcher racks etc. Saves rod holder from damage & finishes the aluminium or stainless steel tube neatly.

World Class Products

Part No. 49641 Black 2” imperial suits 2” (50.8mm)

O.D imperial tube. Max tube wall thickness 1.5mm 49643 Grey 50mm metric suits metric thick wall aluminium

tube. Fits inside 50mm O.D tube. Max tube wall

thickness 3mm.

Part No. 49118 Adjustable rod holder with side mount bracket 49117 Optional extra side mount 49119 Optional extra rail mount adaptor 49115 Optional extra flush deck mount

PREMIUM PLASTIC ROD HOLDER with Slimline Head Robust premium quality, UV stabilised, narrow head plastic flush mount rod holders with moulded gimble in base.

Head size Length Cut hole size Shaft ID

86mm x 58mm 235mm 50mm 43mm

Part No. 49208 White Straight Shaft 49210 Black Straight Shaft 49204 White 30o Angled Shaft 49206 Black 30o Angled Shaft UV Stabilised Sealing Cap T/S Narrow Head Rod Holders 49226 White 49228 Black

Deck Fittings & Hardware

Deck Fittings & Hardware

THE ‘ULTIMATE’ DELUXE 316G STAINLESS STEEL BAIT STATION Designed by Fisherman - For Fisherman!

This ‘one of a kind’ bait station features four angled rod holders, two conveniently placed drink holders, an ergonomically designed channel at the back of the nylon cutting board for ease of draining PLUS the bonus ‘fisherman feature’, two knife, plyer, hook & Iure storage brackets.

Also available as an ‘optional extra’ are removable and adjustable legs for compact storage. The legs fit into standard 40mm ID vertical Rod Holders. Selling the legs seperately to the station also allows boat builders, marine fabricators and retail customers to weld there own feet to suit there specific application.

World Class Products

Overall Height: 700mm Overall Width: 700mm Overall Depth: 450mm Adjustable Width: Min 300mm

Max 500mm Length of Legs 430mm Part No. 49900 Bait Station

49902 Adjustable Legs

Straight stainless steel rod holder to mount bait station.

Sold Each.

Deck Fittings & Hardware

Deck Fittings & Hardware

FOLDING TARGA BAR Folding Targa Bar constructed of Silver Anodised Aluminium.

Tube Diameter Maxium Width Minimum Width Height

40mm 2325mm 1975mm 1153mm

Part No. 29300

D.I.Y. ROCKET LAUNCHER PACKAGE! Are you sick of having rods all over the floor? Then give your boat an affordable upgrade today with this modern alloy adjustable folding rocket launcher!

This awesome fisherman’s package includes your choice of silver or gold rod holders along with the ultimate in targa bars.

SPECS Tube Diameter - 40mm Maxium Width - 2325mm Minimum Width - 1975mm Height - 1153mm

CALL US FO QUOTR A E DAY! TO!

Deck Fittings & Hardware

SKY PYLON ELEVATOR Get that extra height with this tripod designed pylon elevator that bolts straight on to any towing tower (including flat or curved surfaces)!

You’ll be unstoppable as it swivels in all directions allowing for maximum swing.

Deck Fittings & Hardware

PREMIUM WAKEBOARD RACKS Made out of premium silver anodized alloy and features adjustable clamp to suit 1 1/4” (42mm) & 1 1/2” IPS (48mm) pipe and anti-rotation pin.

Durable rubber lining for maximum grip & protection of board.

Heavy duty shock cord for solid board security.

Sold in pairs. One pair needed per side.

Part No. 293410 Part No. 293400

BESSEL PLATE TO SUIT 293415 Solid brite anodised aluminium stock for strength and anodised for long lasting durability.

Dimensions: 7 1/2” Long x 4” Wide 2 1/2” Centre Hole

SKY PYLON Solid brite anodised aluminium stock for strength and anodised for long lasting durability.

Part No. 293417 Price on application

Dimensions: 33” (840mm) x 2 7/16 diameter Part No. 293415 Price on application

WAKEBOARD TOWER LIGHT BAR This silver anodised alloy light bar ergonomically fits on the under side of most wake towers allowing for easy installation for spot lights.

Part No. 293420 Price on application

Deck Fittings & Hardware

Polished Stainless Steel Towel Rail

Deck Fittings & Hardware

Stainless Steel Double Robe Hook

Part No. 30356

Part No. 30350 30352

Length 450mm 600mm

Stainless Steel Robe Hook

Stainless Steel Part Recessed Toilet Roll Holder Part No. 30358

Stainless Steel Towel Triangle

Part No. 30354

Part No. 30362

Stainless Steel Toilet Roll Holder with Hood

Stainless 3mt Retractable Clothes

Part No. 30366

Stainless Steel Soap Dish Part No. 30364

Stainless Steel Toilet Roll Holder Part No. 30368

Stainless Steel Toothbrush & Tumbler Holder

Part No. 30360

Part No. 30370

Deck Fittings & Hardware

Deck Fittings & Hardware

NAIRN INSPECTION PORTS The size quoted is the inside hole size.

Excellent quality Australian made nylon inspection ports with rubber “O” ring lid seals. All ports other than 8” are screw in type (8” is pry-out type).

All White

All White with Kit Bag White with clear Lid

Part No.

36101 36102 36101C 36102C 36101L 36102L 36110L 36114

36106 36104 36105 36103 36106K 36104K 36105K 36103K 36106L 36104L 36105L 36115

36107 36108 36107C 36108C 36107K 36108K 36107CK 36108CK 36107L 36108L 36108CL 36116 36119

36112 36118

UV STABILIZED WATER RESISTANT PLASTIC INSPECTION PORTS

Colour Overall 100mm (4”) Inspection Ports All White 145mm All Black 145mm White with clear Lid 145mm Black with clear Lid 145mm White Lid Only N/A Black Lid Only N/A Clear Lid Only N/A “O” Ring Only N/A 125mm (5”) Inspection Ports All White 170mm All Black 170mm White with clear Lid 170mm Black with clear Lid 170mm All White with Kit Bag 170mm All Black with Kit Bag 170mm White/Clear with Kit Bag 170mm Black/Clear with Kit Bag 170mm White Lid Only N/A Black Lid Only N/A Clear Lid Only N/A “O” Ring Only N/A 150mm (6”) Inspection Ports All White 195MM All Black 195MM White with clear Lid 195MM Black with clear Lid 195MM All White with Kit Bag 195MM All Black with Kit Bag 195MM White/Clear with Kit Bag 195MM Black/Clear with Kit Bag 195MM White Lid Only N/A Black Lid Only N/A Clear Lid Only N/A “O” Ring Only N/A 6” Kit Bag Only N/A 200mm (8”) Inspection Ports All White - Pop-Out Style 252mm “O” Ring Only N/A

115mm 115mm 115mm 115mm N/A N/A N/A N/A 140mm 140mm 140mm 140mm 140mm 140mm 140mm 140mm N/A N/A N/A N/A 165MM 165MM 165MM 165MM 165MM 165MM 165MM 165MM N/A N/A N/A N/A N/A 212mm N/A

KAYAK INSPECTION PORTS 100% waterproof Australian made Kayak Inspection Ports.

Part No. 36750 100mm (4”) White Inspection port 36751 100mm (4”) Black Inspection port 36758 150mm (6”) White Inspection port

Part No. 36755 125mm (5”) Black Inspection port 36754 125mm (5”) White Inspection port 36759 150mm (6”) Black Inspection port

Cut-out

Part No. 36762 36764

150mm White 150mm Black

Deck Fittings & Hardware

Deck Fittings & Hardware

ALLOY SURVEY DECK PLATES

Part No. 29159 75mm (3”) - Slot Key Drive 29158 100mm (4”) - with Deck Key 29160 150mm (6”) - with Deck Key

Overall 120mm 140mm 208mm

Cut-out 85mm 108mm 160mm

HD CAST 316 S/S DECK FILLER High quality heavy duty cast 316 grade stainless steel deck fillers to suit 38mm (1 1/2”) or 50mm (2”) hose. Supplied complete with opening key. The name plate is cast into the filler in large print.

Part No. To suit 38mm (1 1/2”) Hose 29634 Water deck filler 29636 Diesel deck filler 29638 Fuel deck filler Waste Deck Filler 29640

316 Grade SS SURVEY DECK PLATES

Part No. Overall 29155 100mm (4”) Blank Plate 140mm 29157 100mm (4”) - No Sea Spanner 140mm 29166 150mm Stainless Steel Deck Plate 225mm

Comes with stainless steel key and O Ring 29157S Sea Spanner T/S Stainless Steel 29157

BRONZE SURVEY DECK PLATES

Part No. 29152 75mm (3”) - Slot Key Drive 29154 100mm (4”) - with Deck Key 29156 150mm (6”) - with Deck Key

To suit 50mm (2”) Hose 29632 Water deck filler 29633 Diesel deck filler 29630 Gas deck filler

Cut-out 110mm 110mm 158mm

Overall 120mm 140mm 208mm

Cut-out 85mm 108mm 160mm

VENTED FUEL DECK FILLER Allows fuel breather and filler to be combined.

Made from black plastic.

Stainless steel Cap with stainless steel wire retainer.

Suits 38mm Hose.

To suit 50mm (2”) Hose with 300 bend 29625 Fuel deck filler

SS 316 THRU-HULL WITH MESH STRAINER

Part No. 29820

38mm

Suitable raw water intake for gen-set or live bait tank.

SS316 DECK FILLER WITH LOCK Part No. 45068

20mm

NYLON DECK FILLERS

With special lock and key.

With matching symbol.

Patent pending.

These black low profile nylon deck fillers feature a quick & easy opening cap with “O”-ring seal and stainless safety chain. Universal type with 6 pair of silver metallic stick-on name plates; FUEL, GAS, DIESEL, WATER & WASTE.

Part No. 29824 29837

To suit 38mm (1 1/2”) Hose To suit 50mm (2”) Hose

Part No. Hose Size 29669 1-1/2” 29668 2”

A B Marking 3” 3-1/2” Water 3” 3-1/2” Diesel

Deck Fittings & Hardware

Deck Fittings & Hardware

NYLON DECK FILLER WITH COLOURED CAP

SS 316 DECK FILLER CAPS ONLY

Replaceable coloured cap with matching symbol.

Part No. Hose Size 29660 1-1/2” 29661 1-1/2”

A 3” 3”

B 3” 3”

Marking Water with Blue Cap Fuel with Red Cap

Part No. 29645 29646 29647

Description 1 1/4” bsp Deck Filler Cap 1 1/2” bsp Deck Filler Cap 2” bsp Deck Filler Cap

Caps to Suit 29634, 636, 638 & 640 29632, 633 & 630 29625

ALLOY DECK FILLERS & DRAIN BUNGS Alloy Deck fillers/drain bungs are designed to be welded, they have no pre-drilled holes & all come complete with rubber O seals in the cap

29600

29601

29605

29604 29609

Part No. 29600 29601

29604 29605 29606 29607

29609

29612

29610 29616 29618 29613 29614 29620

29622

29608

1 1/2” BSP 1 1/2” BSP Ridge Type Cap Complete Deck Filler 1 1/2” BSP Ridge Type Cap & “O” Ring Only 1 3/4” BSP 1 3/4” BSP Ridge Type Cap Complete Deck Filler 1 3/4” BSP Ridge Type Cap & “O” Ring Only 1 3/4” BSP Slot Type Cap Complete Deck Filler 1 3/4” BSP Slot Type Cap Complete Deck Filler & “O” Ring Only Alloy 1 3/4” BSP to 2” Hose Tail Attachment for deck fillers.

1 3/4” BSP Slotted Cap. Suits 2” Hose 1 1/2” UNF 1 1/2” UNF Marked “FUEL” Cap. Suits 1 1/2” Hose 1 1/2” UNF Ridge Type Cap Complete Deck Filler 1 1/2” UNF Ridge Type Cap & “O” Ring Only 1 1/2” UNF Marked “FUEL”, Easy grip Cap - Complete Deck Filler 1 1/2” UNF Marked “FUEL”, Easy grip Cap & “O” Ring Only 1 1/2” UNF Marked “FUEL” Easy grip Cap with breather - Complete Deck Filler 1 1/2” UNF Marked “FUEL” Easy grip Cap with breather & “O” Ring Only Alloy 1 1/2” UNF to 1 1/2” Hose Tail Attachment for deck fillers.

29607

29618

29606

29608

29612

29610

29616

29614 29613

29620

29622

Deck Fittings & Hardware

Deck Fittings & Hardware

CHROME PLATED BRONZE DECK FILLERS WITH RAISED CAPS The cap comes with a nurled edge for grip and a chain so you can’t loose it.

Part No. 29151A To suit 38mm (1 1/2”) Hose 29151 To suit 50mm (2”) Hose

S/S LOW SILHOUETTE DECK CLEATS Strong, corrosion resistant, 316 gradeS/S, open base deck cleats. Fastening holes 40mm apart centre to centre.

Part No. 56760 56762 56764

Length 150mm 200mm 240mm

Height 30mm 40mm 45mm

Width 60mm 60mm 65mm

Weight 340g 500g 810g

ALLOY DOCK CLEATS

SS FAIRLEAD PAIRS

Heavy duty aluminium alloy dock cleats for wharves, marinas etc. Large hole for mooring ropes and a solid base.

Part No. Length 29431 114mm 29432 152mm

Line Size 13mm 19mm

Weight 270g 540g

Part No. 293721 293720

316G S/S DECK CLEATS Strong, corrosion resistant, 316 grade, open base deck cleats.

All have a 4 hole base.

Length 350mm 290mm

Height 105mm 90mm

CAST ALLOY CLEAT Our new range of raw cast aluminium products are ideal for Boat Builders as they are designed for welding in place.

Part No. 293719 Dimensions: Base: 125mm L x 75mm W Overall Height: 65mm Overall Length: 230mm

Part No. 29175 29176 29177 29179

Length 150mm 200mm 250mm 300mm

Width 43mm 52mm 70mm 70mm

Height 31mm 39mm 47mm 56mm

Mount 6 c/s 6 c/s 8 c/s 8 c/s

STAINLESS STEEL POP UP CLEATS High Quality Pop Up Cleats made from highly polished 316 grade Stainless Steel. The cleat simply pulls up from the base and sits almost flush on the deck when not in use.

World Class Products

NYLON DECK CLEATS Moulded in tough black nylon. Through bolted.

Part No. 29950 110mm black 29952 160mm black 29790 150mm white

S/S HEAVY DUTY DECK CLEATS Strong, corrosion resistant, 316 grade, open base deck cleats. All have a 4 hole base.

Part No. 29171 29172

Depth Length 90mm 125mm 90mm 150mm

Width 40mm 40mm

Part No. 29176HD 29177HD

Length 200mm 250mm

Width 52mm 70mm

Height 39mm 47mm

Mount 6 c/s 8 c/s

Deck Fittings & Hardware

Deck Fittings & Hardware

STAINLESS STEEL SKI TOW EYES

STAINLESS STEEL SKI HOOK Shaft, nut, washer & cast stainless steel base.

Overall Length 120mm

Stainless Steel solid welded construction, stainless steel nuts & washers included.

Part No.

29710 29710A

Outside Ring Dia 60mm 75mm

Part No. 29712

Hull Thickness 48mm 50mm

Mount Screws 8mm 10mm

Protrusion 40mm 35mm

316G CAST S/S SPLIT BOLLARDS Highly Polished Finish & Gentle Rake

Heavy duty 316g S/S split bollard allows securing of the anchor chain. Split will accept from 8mm to 13mm general link chain.

ALUMINIUM CROSS BOLLARDS Upright style, plain marine grade alloy.

Designed for welding.

Pilot holes drilled.

Part No. 29104 29116 29105

Height Width Base Shaft 85mm 80mm 60 x 62 22mm 150mm 100mm 100mm 100 x 75 24mm

316 SS SOLID BOLLARD Part No. Height Width Base Hole DiaShaft SPLIT BOLLARD NO PIN 29101 84mm 94mm 62mm 41mm 20mm

SPRING LOADED CAPTIVE PIN MODEL Offers the ability of securing the chain into the bollard 29100 84mm 122mm 62mm 41mm 20mm 29102 115mm 140mm 86mm 57mm 20mm

CAST ALLOY RAKED BOLLARD Our new range of raw cast aluminium products are ideal for Boat Builders as they are designed for welding in place.

Part No. 29108

Dimensions: Base: 97mm L x 68mm W Overall Height: 105mm Overall Width: 100mm

Traditionally styled heavy duty 316g polished stainless steel bollards to suit most size boats.

World Class Products

Part No. 29096 29098 29099

Base W 140 x 85mm 140mm 60 x 60mm 90mm 76 x 76mm 110mm

H 155m 90mm 115mm

Hole Size 10mm 6mm 8mm

BLACK PLASTIC BOW ROLLER World Class Products

Universal black plastic bow roller with blockage for anchor up to 10kg.

CHROME PLATED BOW ROLLERS Part No. 29128

29129

Small bow roller - with pin Small bow roller - without pin

Part No. Length Width 29449 260mm 80mm

29128

29129

SPARE ROLLERS To suit Anchor Bow Roller

ALLOY BOW ROLLERS Part No. 29130

29131

Small plain alloy - No pin Medium plain alloy - No pin

Part No. 29425 29427

Length 54mm 70mm

Width 62mm 62mm

Deck Fittings & Hardware

Deck Fittings & Hardware

Stainless Steel AUSTRALIAN MADE BOW ROLLERS

S/S 316G BOW ROLLERS WITH PIN

Heavy Duty formed stainless steel bow rollers. Bright polished finish. 50mm Polyurethane roller with spring loaded pin.

Part No. 29402A 29402P

100mm x 57mm Base ALLOY 3 Fixing Holes Spare pin to suit 29402

Heavy duty pressed 316 grade stainless steel bow rollers with 50mm black nylon poly rollers. Quick release captive pin retains rope or chain on rollers.

Part No. 29435 29436

Extended Bow Rollers 29406 150mm x 57mm Base 3 Fixing Holes 29405 200mm x 70mm Base 4 Fixing Holes 29408 205mm x 57mm Base 4 Fixing Holes 29409 Extension Kit

Hinged Bow Rollers Highly polished with polyurethane rollers and removable anchor retaining pin with knurled knob and spring.

29410 100mm x 57mm Base 3 Fixing Holes 29412 145mm x 57mm Base 4 Fixing Holes 29414 190mm x 57mm Base 4 Fixing Holes 29416 240mm x 57mm Base 4 Fixing Holes 29418 Optional Nose Section

Hinged Anchor Devices 29420 205mm x 70mm Base 4 Fixing Holes 29422 255mm x 70mm Base 4 Fixing Holes

Spare Rollers 29424 2” Poly Roller 29424B 2” Poly Roller Black 29426 2 1/4” Poly Roller 29426B 2 1/4” Poly Roller Black

Depth Length 100mm 195mm 125mm 230mm

Width 55mm 55mm

Stainless Steel BOW ROLLERS Danforth to 20kg

Part No. 29488 29490 29492

Depth

90mm

Length Width 300mm 400mm 75mm 500mm

Weight 15kg 20kg 20kg

S/S LARGE NOSE ANCHOR DEVICE AUSTRALIAN MADE

Part No. 29421 Suits 20lb anchor perfectly

Base 115mm x 55mm

3 Fixing Holes 29423 Extra Large

HINGED BOW ROLLERS

STAINLESS STEEL BOW ROLLERS Suits Self Aligned (Bruce Style) Anchors

Part No. 29480 29482 29484

Weight 2.5 - 10kg 2.5 - 10kg 10 - 30kg

Depth 90mm 120mm 110mm

Length 320mm 500mm 600mm

Width 75mm 90mm 95mm

Made from heavy duty stainless steel, this bow roller has a double hinged nose section, designed to securely store the anchor as well as automatically deploy & retrieve the anchor. Spring loaded quick release captive pin to retain anchor & warp.

Part No. 29438

Length 330mm

Depth 105mm

Width 55mm

Deck Fittings & Hardware

Deck Fittings & Hardware

S/S DOUBLE ACTION CABIN HOOK Constructed in 316 Grade Stainless Steel for maximum strength and corrosion resistance

S/S SWIVEL HASP 316 Grade Stainless Steel Constuction Part No. 29898 75mm Flush Mount

S/S HASP & STAPLES 304g Pressed Stainless Steel Constuction.

Part No. 30300 100mm

SATIN SS INDICATOR DOOR BOLT

Part No. 30400 Satin Stainless Steel Indicator Door Bolt.

Part No. 29708 3” Standard 29709 Twistlock

S/S LOCKABLE HASP/STAPLE

DOOR STOP / HOLDER Spring loaded door stop/holder in polished chrome plated brass.

Overall length = 65mm.

Complete with pedestal and bracket.

Lockable Hasp (Stamped) Width 1-1/8” Length 3”

Part No. 29705

SS MAGNETIC DOOR STOP

Part No. 29744

DOOR HOLDER

Stainless steel door catch with cast tongue for strong & secure holding. Roller operation for ease of securing & releasing.

Part No. Clamp Tongue

Base Base 29779 40mm x 35mm 42mm x 24mm 29778 34mm x 20mm 30mm x 18mm

Screw Total Gauge Height 8csh 42mm 8csh 28mm

DOOR STOP CATCH Made from Cast 316g Stainless Steel. Spring loaded door catch complete with pedestal and bracket

Part No. 29746

Length 85mm

Base Screw Guage 50mm 6csh

Cast 316g SS capsulated magnet with rubber cover for quiet closure.

Part No. 29776

SS ADJUSTABLE MAGNETIC DOOR STOP

Part No. 29777

Deck Fittings & Hardware

Deck Fittings & Hardware

SS 316G BARREL BOLTS

LARGE CUPBOARD CLIP ASSEMBLY

Barrel Bolts in highly polished 316g stainless steel.

7 x 4 countersunk fastening holes.

Two piece assembly used to keep doors open or closed Part No. 35189

NYLON DECK BUSH Part No. 30288 30292 30290

Length 75mm 105mm 90mm

Width 30mm 36mm 36mm

Part No. 35119 57 x 40mm To suit up to 20mm rope

WHITE NYLON TUBE CLIPS White Nylon Tube Clips with 2 fastening holes. Size is measured by outside diameter of tube.

Part No.

35143D 35143C 35143B 35143A

BLACK PLASTIC SADDLE Part No. 35148

25mm (1”) 32mm (1 1/4”) 38mm (1 1/2”) 44mm (1 3/4”)

NYLON FLUSH PULL CATCH VULTAIL HEAVY DUTY PIPE CLIPS Part No. 45500 45501 45502 45503 45504 45505 45506

1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 3”

Nylon flush pull catch with spring return. Supplied complete with spacer ring and S/S keeper. Simply lift catch to release.

Self latching.

60mm diameter x 34mm deep Hole cut out 48mm Suits panel thickness 7mm to 18mm Part No. 35600 White

S/S FLUSH HATCH COVER PULL SMALL CUPBOARD CLIP ASSEMBLY Part No. 35190 Small flat cupboard clip

Flush mounting stainless steel hatch pull suits hatches or engine covers up to 45mm thick.

Pin Length 60mm Lift Ring Dia 32mm Part No. 29793

NYLON DECK HOOK WHITE ABS FLUSH PULL CATCH Part No. 35145 25mm deep x 23mm high

NYLON DECK EYE

Made of ABS material. Suitable for materials of 10/20 mm thickness.

Bore the materials with Ø 50 mm.

Part No. 35605

Part No. 35133

Deck Fittings & Hardware

Deck Fittings & Hardware

S/S 316G HEAVY DUTY LATCHES

Part No. 29997

PULL RINGS Part No. Length Width 29748 Chrome Plated Brass Rectangular 44mm 37mm 29742 H/D Cast 316g S/S Large Handle 76mm 57mm 29329 304g Pressed SS Large handle 76mm 57mm 30234 316g Flush S/S with lift handle 47mm 38mm 29747 316g Flush S/S with lift handle 64mm 46mm 29707 Stainless Steel with spring 62mm 52mm

Description Length Width Round latch 75mm 75mm

S/S 316G FLUSH LATCHES High Quality 316 Grade Stainless Steel Flush Latches. Simply installed in a 50mm hole.

29748

29887

29742

29329

29899

Part No. Description Dia 29887 Round latch 50mm 29899 Round latch 50mm

30234

HATCH FASTENERS

29707

29747

Q LOCKS

Part No. 29700 Chrome plated brass anti-rattle

fastener. Lever action, with eye for

padlock. Bolt down area size

70mm x 45mm.

Q Lock is robust, lockable, tamper proof, snag proof & water tight. Ideal for use on cockpit & gas bottle lockers.

29700

29789

Cast 316 S/S anti-rattle fastener. Lever action, with eye for padlock. Bolt down area size 70mm x 45mm.

29789

29791

Toggle Latch fully adjustable, constructed entirely in 304g S/S & polished to a bright finish.

76mm long.

29792

Toggle Latch fully adjustable, constructed entirely in 304g S/S & polished to a bright finish.

125mm long.

29704

Flat Mount chrome plated brass.

Long shank lever action with an eye for a padlock.

Bolt down size 75mm x 28mm.

29706

“T�-Bar hatch fastener.

Made from quality chrome plated polished bronze.

Open Length 100mm.

Closed Length 50mm.

29791 29792

29704

29706

Part No. 29752 Q lock Only 29754 Q lock with Allen Key

Deck Fittings & Hardware

Deck Fittings & Hardware

KING DOOR CLOSERS

~ ~ ~

~ ~

~ ~ ~ ~ ~

Power adjustable Full Range Door Closer Basically Back Check Function Available (Delayed Action Optional) Barrier Free (BF) Models Allow Reductions in Spring Power so that Door Opening is Easier For Disabled Delayed Action (DA) Models Slow Door Closing so Passage is Eased for People with Disabilities Combined Action Models have Both Barrier Free and Delayed Action features, with an Adjustment Range of 1/2 to 4 ANSI Grade 1A-156.4 Standards Applicable UL and CUL Listed All Models Come with a Full Cover to Hide Screws and Spindles The Cover is Corrosion Resistant Each Unit is Packed with a Parallel Arm Bracket

Part No. K900BCSS

Chrome Plated Door Closer

Please contact our office for more information on our extensive range of door closers!

Deck Fittings & Hardware

Deck Fittings & Hardware

SS 316 DOOR SET

CYLINDER MORTISE LOCK 35 - 45mm Left or right hand to open

All 316 Stainless Steel Casting.

Door thickness from 25mm - 35mm.

Part No. 30430 (L or R) Backset 54.5mm Door Thickness 35-45mm Cylinder 6 pin tumbler

Part No. 30422

S/S CABIN HANDRAILS - OVAL Internal mounting

INDICATOR MORTISE LOCK 35 - 45mm Left or right hand to open Part No. 30438 (L or R) Door Thickness 35-45mm Backset 54.5mm

Part No. 29804 20” (500mm)

Made of high quality heavy duty polished stainless steel, with 1/4” X 2” stud.

S/S ROUND HAND RAILS Internal mounting with flanged ends

SLIDING MORTISE LOCK 35 - 45mm Left or right hand to open Part No. 30436 (L or R) Door Thickness 35-45mm Backset 57mm Cylinder 6pin tumbler

Part No. 29810 8” (200mm)

Overall Length 236mm 29812 11” (280mm)

Overall Length 318mm

Made of high quality heavy duty polished stainless steel, with 5/16” x 2” stud.

CHROME PLATED CABIN RAILS 8mm Internal Thread

S/S 316 GRADE SLIDING DOOR LOCK WITH KEY All 316 SS for door thickness from 1 to 1 3/8”. Can be locked from outside with key.

Part No. SM160 225mm SM162 450mm

Part No. 30424

316 GRADE STAINLESS STEEL DOOR & LOCK SET All 316 Stainless Steel Casting for Door Thickness from 25mm-35mm Locks By Turn Button From Inside

Part No. SM163 600mm SM164 900mm

316G STAINLESS STEEL LIFT HANDLE 150mm Stainless Steel Grade 316 Lift Handle Part No. 29799

Part No. 30420

STAINLESS STEEL HAND RAILS with flat ends & 8mm holes

PASSAGE LATCH 35 - 45mm Left or right hand to open Part No. 30432 (L or R) Backset 54.5mm Door Thickness 35-45mm

Part No. SM135 SM136

225mm 300m

Part No. SM137 SM138

450mm 600mm

Deck Fittings & Hardware

Deck Fittings & Hardware

S/S OVAL HAND RAILS Internal mounting

Made of high quality heavy duty polished stainless steel, with 5/16” x 2” stud Part No. 29806 18” (457mm) Overall Length 457mm 29808 24” (606mm) Overall Length 606mm

STAINLESS STEEL CABIN RAILS 2 x 5mm Countersunk Holes Each End

Part No. SM139 225mm SM140 300mm SM141 450mm

Part No. SM142 610mm SM143 900mm

260mm 350mm 450mm 500mm 655mm

S/S HEAVY DUTY STAUNCHION BASE Reinforced heavy duty staunchion base made in 316 grade stainless steel. 4 degree angled top with 2 x allen screws for holding the staunchion (can be drilled & riveted).

Takes 25mm diameter staunchion.

Part No. 56744

NYLON STEP/HANDLE For use as a large handle or a transom step. Manufactured from high impact black nylon.

High Quality End Plates made from highly polished 316 grade Stainless Steel.

Dia Hole Dia 45mm 8mm 50mm 10mm

Part No. 29657

ROUND BASE FOR WELDING Made of stainless steel 316.

Tube OD Base OD Angle 1” 3” 45o 1” 3 60o 1” 3” 90o

S/S FLAG POLE SOCKET TOP MOUNTED

Base size 90 x 72mm 4 x 6mm C’sunk fastening holes

316G STAINLESS STEEL END PLATES

Part No. 56920 56921 56922

Part No. 29784 7/8” (22mm) 60 degree end fitting 29783 7/8” (22mm) centre fitting 29784A 1” (25mm) 60 degree stanchion end fitting 29783A 1” (25mm) 60 degree stanchion centre fitting

Part No. 56750

Manufactured from heavy duty 25mm diameter polished 304 grade stainless steel. These bolt through style hand rails have a wave pattern hand grip underneath and flared ends. The studs are 45mm long with 5/16” whitworth thread & hex nut and they are welded into the hand rail base. All handrails are 60mm height above deck.

Part No. 56945 56950

Stainless Steel Grade 316 , make your own hand rails to any desired length using the end and centre fittings.

These fittings suit 22mm (7/8”) and 25mm (1”) O.D. tube.

Tube fits internally.

S/S Grade 316 Flag Pole Socket Tube OD 25mm (1”) Base 2 5/8” Weight 2500g

STAINLESS STEEL GRIP HAND RAILS

Part No. 29814 29815 29816 29817 29818

S/S HAND RAIL FITTINGS

Fastener 1/4” 1/4” 1/4”

Length Height Depth 165mm 43mm 65mm

Deck Fittings & Hardware

S/S 900 TEE RAIL FITTING

Deck Fittings & Hardware

SS 316 25MM TUBE JOINER

S/S Grade 316 900 Tee Rail Fitting Tube OD 25mm (1”) Weight 185g Part No. Length Tube O.D. 56742 75mm(3”) 25mm(1”)

Part No. 56736

S/S 600 UNIVERSAL TEE RAIL FITTING S/S Grade 316 600 Universal Tee Rail Fitting Tube OD 25mm (1”) Weight 200g Part No. 56738

SPORTS LADDER This superb quality 316g Stainless Steel 3 Step Boat Ladder can be fixed and removed with ease. The ideal dive boat ladder with wide 390mm steps offers easy access for divers wearing flippers.

The transom mount plate has a sliding catch locking mechanism to ensure ladder remains fixed when climbing in & out of the boat.

S/S 600 ROUND BASE RAIL FITTING S/S Grade 316 600 Universal Round Base Fitting Tube OD 25mm (1”) Base 2 3/4” Weight 270g Part No. 56740 Part No. Length Width Pole Dia 47242 930mm 360mm 46mm

SS 316 RECT. RAIL BASE 90O Part No. Base 56732 1-7/8” x 31/2”

Tube O.D. 1”

MAST FOLDING STEPS For climbing masts or easier & safer sail stowing. Folds flat, securely & rattle free. Safe working load of 140kg. The “Mast Step” is manufactured from a special combination of “Nylon/ Glass fibre” which, together with its design, gives the step a safe working load of 140kg (310lbs). The steps are UV stabilized and provide safe and secure footholds in many situations including; climbing or working on a mast, getting in or out of large lockers or lazerettes, or climbing onto coach roofs. Each step weighs only 165 grams & can be folded flat when not in use. One simply unfolds the steps as one ascends or descends. Although the steps provide a secure foothold, it is strongly recommended to use a harness with a safety line attached when climbing a mast.

Features Part No. • Lightweight 70730 Grey Mast Step • Corrosion free 70732 White Mast Step • No electrolysis 70734 Black Mast Step • No rattling • Fold flat • UV stabilized • Available in Grey, White and Black

Safe working load of 140kg.

Folds flat, securely & rattle free.

SS RETRACTABLE LADDER WITH CATCH Have you had enough of your ladder skiing behind the boat?

Our new patented exclusive push button under platform ladder solves the problem! No velcro strap needed, just push the button to release the catch for use and then simply slide back into the bracket after. It’s that easy!

Part No. Length Extended 47268 600mm 47269 870mm

Leg Width Mounting Plate 220mm 300mm x 290mm 220mm 300mm x 290mm

SS 3 STEP FOLDING LADDER

Part No. Length Length Width 47243 890mm Open 395mm Closed 209mm

Deck Fittings & Hardware

Deck Fittings & Hardware

STAINLESS STEEL HINGED FOLDING LADDER Made from 316G Highly Polished Stainless Steel with all tig welded construction. These 4 Step Folding Ladders feature hinged mount brackets at the top and also the middle, enabling easy fitting to most transoms. They fold away with a strong nylon clip and have grooved nylon tread for extra grip and comfort.

Available with or without posts

STAINLESS STEEL UNDER PLATFORM LADDER Made from Quality 304 grade Stainless Steel. This U/Platform ladder is designed to be mounted under the duckboard or recess, and folds away with a strong velcro belt. The 3 steps feature grooved nylon tread for extra grip and comfort.

Length 46cm. Width 26cm. Height 30cm Overall Length Open 850mm Closed 450mm Distance between rungs 230mm Tube Diameter 24mm (1�)

Tube Thickness 1.6mm (1/16�)

Gross Weight 3kg

Part No. 47266 Extended length 890mm Length retracted 375mm Width 290mm

Part No. 47241 No post 47240 With post

STAINLESS STEEL TELESCOPIC BOARDING LADDER

SS 4 RUNG OPEN TOP LADDER Made from 316g highly polished stainless steel,this 4 rung folding ladder is ideal when transom space is at premium. The ladder is thinner than standard versions being only 210mm wide.

Fold down telescopic boarding ladder for mounting on horizontal surfaces such as duckboards or pontoons. Made from quality Stainless Steel these ladders are available in 2 step or 3 step with grooved nylon anti-slip tread on steps.

World Class Products

Mounting holes (centre - centre) are only 195mm apart vertically and 225mm horizontally to allow mounting in a very small area.

Length opened - 800mm Length folded - 490mm Width - 210mm Part No. 47270

STAINLESS STEEL BOARDING LADDER

Part No. SM147

Part No. 47260 2 Step Length Extended 597mm Length Folded 343mm Width 297mm Short Mounting Legs 90mm Part No. 47261 2 Step Length Extended 597mm Length Folded 343mm Width 297mm Long Mounting Legs 150mm Part No. 47262 3 Step Length Extended 900mm Length Folded 381mm Width 305mm

Deck Fittings & Hardware

Deck Fittings & Hardware

SAVE YOUR KEEL with KEELGUARD Eliminate costly repairs!

Invest in one Megaware KeelGuard and bring yourself years of worry-free boating. As you know, wear or damage to your keel can cause the protective gel-coat finish to break down, enabling moisture to reach and damage the fibreglass laminates. But you can put that worry behind when you install KeelGuard, a powerful shock and abrasive resistant protector that safe guards the surface of your boat or personal water craft like nothing else can.

Step one Rough the keel surface with the provided ScotchBrite pad to remove waxes, release agents and surface materials.

Step two Wipe with cleaning agent to remove all contaminants.

KeelGuard is an ultra tough Polycor composite for dependable protection. It adheres along the keel using an extremely strong 3M pressure sensitive acrylic adhesive. This remarkable adhesive is very similar to that used by NASA on the space shuttle and specified by architects to seal windows of skyscrapers.

Step three Apply the provided 3M primer along the keel line.

Enjoy worry free boating!

Step four Pull back the protective tape and centre the KeelGuard protector evenly along keel.

Please Note: Warranty is void if used on keel roller trailors.

Part No. 24505 24505BLU 24505GREY 24506 24506BLK 24506BLU 24507

Colour White Blue Grey White Black Blue White

Width 5” 5” 5” 5” 5” 5” 5”

Length 5 ft 5 ft 5 ft 6 ft 6 ft 6 ft 7 ft

T/S Boats 15 to 16 ft 15 to 16 ft 15 to 16 ft 17 to 18 ft 17 to 18 ft 17 to 18 ft 19 to 22 ft

Step five Press on the KeelGuard protector with specially designed burnishing tool.

BOFOR MARINE EQUIPMENT Bofor Classic Hatch, Ultra Slim Hatch and Clamping Portholes are CE approved & certified at design category A on area II. Certificate of EC Type-Approval issued upon request.

Simple conventional designs for quick and safe fixing. These heavy duty hatches are made of top quality aluminium alloy extrusion, hand polished and deep anodised for maximum corrosion resistance. A thick acrylic with UV addition is fixed on the self supporting frame carefully by quality sealant to give 100% waterproofing. Square, Rectangular and trapezoid shapes and many sizes to choose from. Can be locked from inside by a button switch on the handle. External handles enable hatch to open from outside if not locked.

Friction hinge to open in any position. Adjustable by M8 inbus bolt & nut in the hinge. Joints are waterproof by neoprene. Beige ABS trim moulding to suit any hull thickness.

Installation Instructions 1 Before installation, please check the following: Check that the hatch can be fitted in the planned position. the maximum tolerance is +/- 1 mm. Check that you don’t damage anything in this area such as superstructure, electrical cables, lamps, deck equipment & that it can be opened freely.

2 Mark the cut-out with a pencil using the frame of the hatch as a template. Check this cut-out with the dimensions in the table referring to your hatch. Next cut out the deck. See previous change.

3 Place the hatch in the hole & present the ABS trim from the inside. Cut out this ABS frame to adjust it between the roof & the hatch.

4. Before installation, clear away dust and clean the surface of the deck where you want to fit the hatch. Apply sealant to the inner surface of the lower frame. Fix the hatch with screw type M5. Surplus sealant must taken off after drying.

5 Check that the hatch is operating well when opening, closing and locking.

6 This hatch needs low maintenance. It must be cleaned regularly with clean water. Do not use abrasive cleaner which can damage the appearance of the alloy or of the glass.

Fastening Sizes for use on hatches and portholes.

Deck Thickness mm Fastenings

3 to 6 M5 x 12

6 to 10 M5 x 16

10 to 14 M5 x 20

14 to 18 M5 x 25

18 to 20 M5 x 30

22 to 27 M5 x 35

28 to 32 M5 x 40

32 to 36 M5 x 45

Deck Fittings & Hardware

Deck Fittings & Hardware

Certificate of EC Type-Approval issued upon request

Flyscreens and ABS Trims Sold Separately CLASSIC HATCH ONLY Part No. Shape Acrylic thick Weight Cut Out Radius Cut Out Cx D Overall Size A x B 36200 Square 10mm 1.5kg 40mm 202 x 202mm 240 x 240mm 36201 Rectangular 10mm 2kg 40mm 202 x 347mm 240 x 385mm 36202 Square 10mm 2kg 40mm 260 x 260mm 300 x 300mm 36203 Rectangular 10mm 5kg 40mm 320 x 450mm 360 x 490mm 36204 Square 10mm 5.6kg 40mm 420 x 420mm 455 x 455mm 36205 Rectangular 10mm 6kg 40mm 370 x 500mm 410 x 540mm 36206 Square 10mm 6.8kg 40mm 505 x 500mm 545 x 545mm 36207 Square 12mm 10.4kg 40mm 620 x 620mm 660 x 660mm 36208 Square 12mm 12.5kg 40mm 700 x 700mm 740 x 740mm

ABS TRIM ONLY Part No. Shape Hatch Type T/S Hatch Size T/S Part No. 36220 Square Classic 240 x 240mm 36200 36221 Rectangular Classic 240 x 385mm 36201 36222 Square Classic 300 x 300mm 36202 36223 Rectangular Classic 360 x 490mm 36203 36224 Square Classic 460 x 460mm 36204 36225 Rectangular Classic 410 x 540mm 36205 36226 Square Classic 545 x 545mm 36206 36227 Square Classic 660 x 660mm 36207

FLYSCREEN ONLY Part No. Shape Hatch Type T/S Hatch Size T/S Part No. 36240 Square Classic 240 x 240mm 36200 36241 Rectangular Classic 240 x 385mm 36201 36242 Square Classic 300 x 300mm 36202 36243 Rectangular Classic 360 x 490mm 36203 36244 Square Classic 460 x 460mm 36204 36245 Rectangular Classic 410 x 540mm 36205 36246 Square Classic 545 x 545mm 36206 36247 Square Classic 660 x 660mm 36207 36500 Handle set to suit Bofor Hatches

Deck Fittings & Hardware

Deck Fittings & Hardware

Certificate of EC Type-Approval issued upon request.

Flyscreens and ABS Trims Sold Separately. Bofor Ultra Slim Hatch, is only 20mm high from deck.

ULTRA SLIM HATCH ONLY Part No. Overall Size A x B Cut Out using Trim C x D Cut Out radius Weight Acrylic thick 36300 270 x 270mm 205 x 205mm 40mm 1.1kg 10mm 36301 325 x 325mm 260 x 260mm 40mm 1.6kg 10mm 36302 385 x 515mm 320 x 450mm 40mm 3.5kg 10mm 36303 480 x 480mm 420 x 420mm 40mm 4.2kg 10mm 36304 575 x 575mm 505 x 505mm 40mm 5.3kg 10mm 36305 480 x 480mm 425 x 425mm 208mm 3.4kg 10mm 36306 594 x 594mm 575 x 575mm 258mm 5kg 10mm Black finish available on request.

ABS TRIM ONLY Part No. 36320 36321 36322 36323 36324 36325 36326

T/S Part No. 36300 36301 36302 36303 36304 36305 36306

T/S Hatch Size 270 x 270mm 325 x 325mm 385 x 515mm 480 x 480mm 575 x 575mm 480 x 480mm 575 x 575mm

Hatch Type Ultra Slim Ultra Slim Ultra Slim Ultra Slim Ultra Slim Ultra Slim Ultra Slim

Shape Square Square Rectangular Square Square Round Round

Shape Square Square Rectangular Square Square Round Round

FLYSCREEN ONLY Part No. T/S Part No. T/S Hatch Size Hatch Type Shape 36340 36300 270 x 270mm Ultra Slim Square 36341 36301 325 x 325mm Ultra Slim Square 36342 36302 385 x 515mm Ultra Slim Rectangular 36343 36303 480 x 480mm Ultra Slim Square 36344 36304 575 x 575mm Ultra Slim Square 36345 36305 480 x 480mm Ultra Slim Round 36346 36306 575 x 575mm Ultra Slim Round

Classic Hatch

Ultra Slim Hatch

Deck Fittings & Hardware

Deck Fittings & Hardware

Certificate of EC Type-Approval issued upon request.

Flyscreens and ABS Trims Sold Separately FIXED PORTHOLES ONLY Part No. Shape Acrylic thick Weight Cut Out radius Cut Out C x D Overall Size A x B 36400 Rectangular 6mm 1.6kg 55mm 156 x 303mm 184 x 330mm 36401 Rectangular 6mm 2kg 55mm 156 x 405mm 184 x 433mm 36402 Rectangular 6mm 1.7kg 55mm 171 x 347mm 200 x 375mm 36403 Rectangular 6mm 2.4kg 55mm 171 x 429mm 200 x 457mm 36404 Rectangular 6mm 2.7kg 55mm 171 x 627mm 200 x 655mm 36405 Oval 6mm 1.7kg 86mm 171 x 347mm 200 x 375mm 36406 Oval 6mm 1.9kg 86mm 171 x 375mm 200 x 400mm 36407 Oval 6mm 2.2kg 86mm 171 x 405mm 200 x 433mm 36408 Eliptical 6mm 1.7kg 55 x 370mm 175 x 380mm 200 x 400mm 36409 Eliptical 6mm 2.4kg 55 x 395mm 225 x 480mm 250 x 500mm 36431 Eliptical 6mm 2.4kg tba 155 x 340mm 180 x 355mm

ABS TRIM ONLY Part No. Shape Port Type T/S Port Size T/S Part No 36410 Rectangular Fixed 184 x 330mm 36400 36411 Rectangular Fixed 184 x 433mm 36401 36412 Rectangular Fixed 200 x 375mm 36402 36413 Rectangular Fixed 200 x 457mm 36403 36414 Rectangular Fixed 200 x 655mm 36404 36415 Oval Fixed 200 x 375mm 36405 36416 Oval Fixed 200 x 400mm 36406 36417 Oval Fixed 200 x 433mm 36407

FLYSCREEN ONLY Part No. Shape Port Type T/S Port Size T/S Part No 36460 Rectangular Fixed 184 x 330mm 36400 36461 Rectangular Fixed 184 x 433mm 36401 36462 Rectangular Fixed 200 x 375mm 36402 36463 Rectangular Fixed 200 x 457mm 36403 36464 Rectangular Fixed 200 x 655mm 36404 36465 Oval Fixed 200 x 375mm 36405 36466 Oval Fixed 200 x 400mm 36406 36467 Oval Fixed 200 x 433mm 36407

Deck Fittings & Hardware

Deck Fittings & Hardware

Certificate of EC Type-Approval issued upon request.

Flyscreens and ABS Trims Sold Separately OPENING PORTHOLES ONLY Part No. Overall Size A x B Cut Out C x D Cut Out Radius Weight Acrylic thick 36420 184 x 330mm 156 x 303mm 55mm 1.6kg 6mm 36421 184 x 433mm 156 x 405mm 55mm 2kg 6mm 36422 200 x 375mm 171 x 347mm 55mm 1.7kg 6mm 36423 200 x 457mm 171 x 429mm 55mm 2.4kg 6mm 36424 200 x 655mm 171 x 627mm 55mm 2.7kg 6mm 36425 200 x 375mm 171 x 347mm 86mm 1.7kg 6mm 36426 200 x 400mm 171 x 375mm 86mm 1.9kg 6mm 36427 200 x 433mm 171 x 405mm 86mm 2.2kg 6mm 36428 200 x 400mm 175 x 380mm 55 x 370mm 1.7kg 6mm 36429 250 x 500mm 225 x 480mm 55 x 395mm 2.4kg 6mm

ABS TRIM ONLY Part No. T/S Part No T/S Port Size Port Type Shape 36440 36420 184 x 330mm Opening Rectangular 36441 36421 184 x 433mm Opening Rectangular 36442 36422 200 x 375mm Opening Rectangular 36443 36423 200 x 457mm Opening Rectangular 36444 36424 200 x 655mm Opening Rectangular 36445 36425 200 x 375mm Opening Oval 36446 36426 200 x 400mm Opening Oval 36447 36427 200 x 433mm Opening Oval 36448 36428 200 x 400mm Opening Eliptical 36449 36429 250 x 500mm Opening Eliptical

FLYSCREEN ONLY Part No. T/S Part No T/S Port Size Port Type Shape 36460 36420 184 x 330mm Opening Rectangular 36461 36421 184 x 433mm Opening Rectangular 36462 36422 200 x 375mm Opening Rectangular 36463 36423 200 x 457mm Opening Rectangular 36464 36424 200 x 655mm Opening Rectangular 36465 36425 200 x 375mm Opening Oval 36466 36426 200 x 400mm Opening Oval 36467 36427 200 x 433mm Opening Oval 36468 36428 200 x 400mm Opening Eliptical 36469 36429 250 x 500mm Opening Eliptical

Shape Rectangular Rectangular Rectangular Rectangular Rectangular Oval Oval Oval Eliptical Eliptical

Deck Fittings & Hardware

Deck Fittings & Hardware

SO-PAC ACCESS HATCHES

For Storage Lockers, Inspection Hatches, Anchor Lockers and Cockpit Floor Storage.

Features: UV Resistant ASA Plastic, Low Profile, Almost Flush Fitting, Reinforced Lid with Non Skid Surface, Supports Normal Crew Foot Traffic, Easy to Install.

Part No. 93256 93257 93260 93261 93266 93267 93992

93994

93996

93998

93272 93273 93286 93287 93274 93275 93288 93290 93292 93294 93296 93298 93297 93299 93300 93302 93270 93271 93276

Series 3000 Outside Frame Clear Opening Series 3000 Classic Small Access Hatch White 381 x 280mm 280 x 180mm Series 3000 Classic Small Access Hatch Grey 381 x 280mm 280 x 180mm Series 3000 Classic Medium Access Hatch White 402 x 328mm 290 x 216mm Series 3000 Classic Medium Access Hatch Grey 402 x 328mm 290 x 216mm Series 3000 Classic Large Access Hatch White 595 x 348mm 495 x 246mm Series 3000 Classic Large Access Hatch Grey 595 x 348mm 495 x 246mm Series 3000 Classic Round Access Hatch 8” White 265mm 180mm Removable lid with twist lock lift ring handle Series 3000 Classic Round Access Hatch 8” Grey 265mm 180mm Removable lid with twist lock lift ring handle Series 3000 Classic Round Access Hatch 10” White 315mm 231mm Removable lid with twist lock lift ring handle Series 3000 Classic Round Access Hatch 10” Grey 315mm 231mm Removable lid with twist lock lift ring handle Latch Kit to suit Series 3000 Small White Hatches Latch Kit to suit Series 3000 Small Grey Hatches Latch Kit to suit Series 3000 Medium & Large White Hatches Latch Kit to suit Series 3000 Medium & Large Grey Hatches White Latch Kit to suit 93992 & 93996 Grey Latch Kit to suit 93994 & 93998 Series 4000 Series 4000 180 Degree Opening Hatch Small White 375 x 285mm 292 x 192mm Series 4000 180 Degree Opening Hatch Small Grey 375 x 285mm 292 x 192mm Series 4000 180 Degree Opening Hatch Medium White 395 x 335mm 312 x 242mm Series 4000 180 Degree Opening Hatch Medium Grey 395 x 335mm 312 x 242mm Series 4000 180 Degree Opening Hatch Large White 595 x 355mm 512 x 262mm Series 4000 180 Degree Opening Hatch Large Grey 595 x 355mm 512 x 262mm Lockable Series 4000 180 Degree Opening Hatch Large White 595 x 355mm 512 x 262mm Lockable Series 4000 180 Degree Opening Hatch Large Grey 595 x 355mm 512 x 262mm Series 4000 latch Kit to suit Grey Hatches Series 4000 latch Kit to suit White Hatches Series 4000 White replacement screw insert Series 4000 Grey replacement screw insert Stainless steel lock to suit.

Cutout 305 x 205mm 305 x 205mm 328 x 254mm 328 x 254mm 525 x 280mm 525 x 280mm 210mm 210mm 260mm 260mm

305 x 205mm 305 x 205mm 325 x 255mm 325 x 255mm 525 x 275mm 525 x 275mm 525 x 275mm 525 x 275mm

WHITE HATCH GUARANTEED WON’T GO YELLOW STRONGEST PLASTIC HATCH ON THE MARKET

Deck Fittings & Hardware

Deck Fittings & Hardware

S/S SPRING HATCH STAY

ADJUSTABLE HATCH STAY Chrome plated brass telescopic hatch adjusters with positive locking nut. One end swivels and the other end pivots, allowing a variety of installation positions.

Part No. 36360 250mm-475mm 36362 310mm-530mm 36237 330mm-660mm

Stainless steel spring style hatch and window support. When hatch or window is in an open position the spring coil becomes a rigid support. To close, apply side pressure to the middle of the spring coil and the support will collapse to a closed position.

Part No. 36364 36365

IMPORTED TACKLE BOX HATCH

Length 235mm 280mm

Spring Dia 11mm 16mm

WHITE POLYCARBONATE HATCH 480mm x 480mm Cut out size: 430mm x 430mm and comes complete with a polycarbonate internal dress trim.

Part No. 38212 Tackle Box Hatch with draws.

Opening 1800 375mm x 275mm x 160mm

MID GREY ACCESS HATCHES

Imported Economy Italian Storage Hatches made from “Walk On” PVC Plastic material. Featuring full 180 degree door opening.

The hatch is closed down via two sturdy internal handles, the handles have two settings: setting one is to lock down and seal hatch: setting two is to close hatch from external intruders but let in ventilation.

The hatch can be locked into any open Position by twisting hatch adjuster to lock.

Part No. 36190

38230

38236

38234

Part No. 38230 38232 38234 38236 38237 38241 38242 38244 38246 38247

HATCH SHADE

38232

Length 375mm 380mm 460mm 600mm 600mm 375mm 380mm 460mm 600mm 600mm

Width 280mm 380mm 510mm 360mm 250mm 280mm 380mm 510mm 360mm 250mm

Cut out Colour 200 x 300mm Dark Grey 305 x 305mm Dark Grey 390 x 440mm Dark Grey 280 x 530mm Dark Grey 175 x 530mm Dark Grey 200 x 300mm White 305 x 305mm White 390 x 440mm White 280 x 530mm White 175 x 530mm White

Part No. 57001 14” x 14” 57002 25 1/2” x 32” 57003 18 1/2” x 30”

To deploy, simply pull the lead rail and hook to the latch on the other side of the hatch. Installs over hatches 30” wide and up to 23” long. Overall dimension of the case is 35” long by 2 1/2” wide. One year warranty on parts and labor.

ALUMINIUM HATCHES These hatches are not hinged and the lids are removable. These sturdy aluminium hatches are white powder coated. They can be stood on and mount flush into the deck. The lids are also removable for easy access.

Part No. 36160 36155 36150

Overall Size 370 x 270mm 600 x 350mm 510 x 458mm

Cut Out 307 x 206mm 538 x 286mm 447 x 393mm

Opening 260 x 160mm 490 x 240mm 400 x 345mm

Deck Fittings & Hardware

Deck Fittings & Hardware

WHITE ACCESS HATCHES

WHITE STORAGE HATCHES Deluxe hatches made from UV inhibited polycarbonate material and fitted with a storage box. Featuring reinforced construction, full 180 degree door opening and screw holes completely covered by the non-skid lid for an attractive flush finish.

New stronger recessed handles.

38218

38214

38200 38213

Part No. 38200 38204 38208 38218 38219

38219

Size Opening Overall size Cut out Small 1800.

375 x 275mm 295 x 200mm 375 x 375mm 300 x 300mm Medium 1800.

Large 1800 600 x 355mm 530 x 280mm Lock to suit above hatches Spare handle to suit 38200-38208

38218 38216 38219

Part No. 38213 38214 38216 38218 38219

Size Overall size Cut out Small 375 x 275mm 298 x 198mm Medium 375 x 375mm 275 x 275mm Large 600 x 355mm 500 x 250mm Lock to suit above hatches Spare handle to suit 38213-38216

38208

38204

WHITE PLASTIC FLUSH MOUNT CASES Ideal for recessed filler

Part No. OPEN CASE 28506 28504 28502

Length Height Width 370mm 120mm 100mm 180mm 110mm 100mm 150mm 110mm 80mm

RECTANGULAR HOLD (all horizontal mount) 28520 370mm 120mm 100mm

28520

CASE WITH DOOR 28514 370mm 120mm 100mm 28512 180mm 110mm 100mm 28510 150mm 110mm 80mm

28500

RECESS FLUSH MOUNT 28500 150mm 110mm 78mm All measuremnts shown are internal dimensions

28514

MOSQUITO NET HATCH COVER The Mosquito Net Hatch Cover fits over the hatch to prevent mosquito’s from entering the Cabin. The tubes at the bottom can be filled with a lead cord or a bar of aluminium to keep the net down when windy.

Part No. 36780 36782 36784 36786

Length 32cm 44cm 54cm 62cm

Width 32cm 44cm 54cm 62cm

28512

28510

28506

28504

28502

Deck Fittings & Hardware

Deck Fittings & Hardware

ULTRAFLEX AV HATCH LIFTERS The AV Hatch lifters are electromechanical products, especially designed for marine use on pleasure boats. They allow full or partial opening and closing of heavy engine hatches, peak tanks, hatch beams etc. By activating a switch, it is possible to lift the hatch to any desired position from closed to full open, an internal self-locking mechanism will maintain the position preventing any accidental hatch closing. In case of an emergency, the lifter is fitted with a stainless steel telescopic ram for manual operation. The lifters are supplied with all mounting hardware. The AV hatches do not require any maintenance, are easy to install and are made of materials resistant to corrosion.

83900 X - 827mm + 450mm Stroke 83904 X - 977mm + 600mm Stroke 83906 X - 977mm + 600mm Stroke TECHNICAL FEATURES * According to the load required, the AV hatch lifter can be mounted individually, or in twin cylinder installation for heavier loads. It is also possible to install more than two AV actuators in multiple applications. * Maximum load for single installations: 1200N (120 kg -265 Ibs.) * Maximum load for dual installations: 2400N (240 kg -530 Ibs.) * Supplied with all mounting hardware. * Stainless Steel telescopic ram for manual operation in case of emergency. * Available on request without manual emergency opening device for high performance boats. * Circuit breaker to stop accidental overloading of the system and electronic stop at closed or full open position. * IP 65 protection rated * Speed: 25 mm/sec with no load applied * Current absorption in single installations: 10A at 12V, 5A at 24V * Current absorption in dual installations: 20A at 12V, 10A at 24V 12V RELAY BOX * Meets 150 8846 MARINE anti-deflagration requirements.

It contains the relays needed for cycle revertion.

Part No. 83898 83900 83904 83906

12V 10 amp 300mm Stroke Hatch Lifters 12V 10 amp 450mm Stroke Hatch Lifters 12V 10 amp 600mm Stroke Hatch Lifters 24V 10 amp 600mm Stroke Hatch Lifters

Part No. 84230

ULYSSES SERIES ELECTRICAL LINEAR ACTUATORS Technical Features: Maximum Load: 650N (65kg) Maximum load is recommended not to be exceeded.

Supplied with all mounting hardware.

Aluminium ram.

Circuit breaker to stop accidental overloading of the system and electronic stop at closed or full open position.

IP65 protection rated.

Speed: 5mm/sec no load applied, 6mm/sec loaded.

Current absorption: 2A at 12V Part No. 83901 83903

Volts 12V DC 12V DC

Stroke 180mm 300mm

Length A O Esternal 488mm 34mm 608mm 34mm

Deck Fittings & Hardware

Deck Fittings & Hardware

STAINLESS STEEL LIFT-O-MAT MARINE HATCH STRUTS Improve safety and convenience around hatches, lids and flaps on your vessel by installing Stabilus Lift-O-Mat Inox Gas Springs. No more hatches laying around on deck or slamming closed causing injury to family or crew. Made from attractive, rust resistant 316 grade stainless steel, Stabilus Lift-O-Mat gas springs are easy to install and are available in a variety of sizes and pressures to suit all applications.

There are four size options to choose from. These hatch sizes and weights are approximate and need not be square. If you need extra pressure added to the strut contact us to arrange so.

Mounting Instructions 1. Mount Flat Brackets into position on frame as per chart & diagram A B. 2. Clip shaft end of strut onto bracket.

3. Clip Right-Angled Brackets into tube end.

4. Open hatch to desired position C and mark where bracket is to be fixed on hatch.

Remove bracket from strut by releasing pressure on spring clip with small screwdriver .

5. Screw bracket onto hatch and clip tube end back on. Ensure spring clip is in place.

NB: Hatch Pack 4 has stainless steel ball sockets and clips.

Remove clips before fitting brackets and replace when installation is complete.

NOTE: Position of hatch should not be more than 8O0 as strut is not designed to take load weight of hatch. If you need to go up or over 9O0 a separate devise will be needed to hold hatch open.

Part No. 93671

Description Hatch Size S/S Gastay Unit 40 - 60cm Single Strut only

Hatch Weight 2 - 5kg

Mounting Positions A x B 75mm x 50mm

Part No. 93672 93673 93674

Description Hatch Size Hatch Weight Mounting Positions A x B S/S Gastay Kit 2 60 - 80cm 5 - 15kg 140mm x 70mm S/S Gastay Kit 3 80 - 100cm 15 - 25kg 150mm x 70mm S/S Gastay Kit 4 100 - 150cm 25 - 35kg 200mm x 70mm 93672, 93673 & 93674 All sold in pairs with SS Mounting Hardware

HYDRAULIC TRIM TAB UNIT All you need to install this set of trim tabs is in this kit (less trim tab flaps). A modern control panel with a unique protection circuit which prevents simultaneous inversion of the flaps during up/down positioning. 12v hydraulic unit with two electro valves, two quick connect fittings for the oil hoses, one tank with filling cap & two stainless steel fixing brackets suitable for both horizontal & flush mounting. 5 meters of high resistance polyamide hose. 2 gaskets for cylinder bases. 2 threaded water proof extension feed through cables for cylinders. 2 cylinders made of reinforced plastic material, violent impact resistant. Swivel type fixing at 180 degrees complete with a double joint.

Simple mechanism cylinders with spring retraction.

Part No. 55200 55225 55226

Complete kit less tabs 8m cable t/s 55200 control panel 8m cable t/s 55200 hydraulic pump

HYDRAULIC TRIM TABS 2 trim tab flaps formed with hinges in one piece of 2mm stainless steel.

Depth: Distance from hinge to end of flap Length: Distance along hinge Part No. 55220 285mm long x 250mm deep 55222 450mm long x 250mm deep RAMS TO SUIT TRIM TABS A pair of black cylinders with special attachment suitable to be used with throughhull rigid hose or external passage of the oil. Complete with all the connectors for double use.

Part No. 55230 CIRCUIT BOARD & PLUG ASSEMBLY TO SUIT TRIM TABS ‘Rele’ panel 12 Volts c/w painted circuit card and connection cable.

Part No. 55228

Deck Fittings & Hardware

Deck Fittings & Hardware

NO ELECTRICS - NO HYDRAULICS JUST PHYSICS AND HUMAN INGENUITY This unique system is the only one of its kind in the industry. The internal valve system is truly ‘smart’ in its design of controlling your boat’s performance. It will reduce the minimum planing by 33%. It will provide a level, more comfortable ride at lower speeds. It will improve economy, handling and safety. As the boat speed increases, the water pressure also increases. Once the water pressure exceeds the Actuator (max LIFT period) the trim plates begin to move upward until they are horizontal with the bottom of the boat. The internal valve system dampens the trim plate movement which eliminates any instant reaction to minor water pressure variances. SMART TABS provide smooth & undetectable reaction to boat speed, creating a level, more comfortable ride at lower speeds. All mounting hardware, instructions and templates are included. SMART TABS require no through hull drilling.

Part No.

Boat Length

Motor Size

Motor Type

Model

55108

3.0 - 3.4 - 3.7mtrs

5 -15 HP

2 or 4 stroke

ST781-20

Boat Type

55100

3.0 - 3.4 - 3.7mtrs

8 - 18 HP

2 or 4 stroke

ST780-20

55110

3.0 - 3.4 - 3.7mtrs

20 - 25 HP

2 or 4 stroke

ST780-30

55120

4.0 - 4.3 - 4.6mtrs

30 - 40 HP

2 stroke

ST980-30

55130

3.7 - 4.0 - 4.3mtrs

40 - 50 HP

4 stroke

ST980-40

4.3 - 4.6 - 4.9mtrs

50 - 80 HP

2 stroke

55140

4.6 - 4.9 - 5.2+mtrs

40 - 60 HP

2 or 4 stroke

ST1290-40

55150

4.6 - 4.9 - 5.2+mtrs

75 - 100 HP

4 stroke

ST1290-60

4.9 - 5.2 - 5.5+mtrs

70 - 140 HP

2 stroke

55160

5.2 - 5.5 - 5.8mtrs

150 - 240 HP 2 or 4 stroke

6.1 - 6.4 - 6.7mtrs

55162

7 - 9.1mtrs

2 or 4 stroke

ST1290-80

ST1610-120

Note: Inboard engines and Jet drives are the same as 4 stroke outboards.

REPLACEMENT RAMS Part No. 55102 55122 55132 55152 55161

20lb 30lb 40lb 60lb 80lb

Deck Fittings & Hardware

Deck Fittings & Hardware

The ST 1610 Series is ideal for low profile Fiber Glass, Aluminum, and RIB design boat with transom widths less than 10 feet (trailerable boats). This heavy duty system provides an active suspension system for the boat that increases stability and smooths the ride even in rough seas. Easier planing at slower speeds, increased payload performance, improved tracking and handling are available automatically without the need for pilot interface. No switches, no electric or hydraulic connections, and no maintenance. Specially designed for boats between 23’ and 30”, under 10’ in width, and up to 8,500 Lbs gross weight. The ST1610 series features two nitrogen gas actuators per plate providing increased stern lift and twice the reactive dampening, eliminating any instant changes from water pressure variances. This fully automatic and active system provides smooth and undetectable reaction to boat speed, and water conditions creating a level more comfortable ride.

Part No.

55162

Boat Length 7mts - 9.1mts MaxWidth 9’10” Gross Weight 6500 lbs System Contents : * 2 Trim Plates * 2 Hinges (seven holes 2” on center) * 4 Gas Actuators * (GA5000-60 or GA5000-80) * 4 Plate Brackets and Transom Brackets * All Mounting Hardware, Sealant Material, Instructions & Mounting Templates

The new SX series incorporates all of the fully automatic features of our popular smart tabs with the rust and corrosion free benefits of molded composite materials. Full assembly can be completed in seconds and the installation in minutes with nothing more than one drill and a phillips screw driver.

Smart Tabs SX provide un-equaled performance and durability with no maintenance in fresh or salt water. The system can be specifically tuned to maximize the performance of any power boat, and tracking ribs have been added to improve handling at higher speeds.

The patented SMART TABS are one of a kind trim and stabilizer system that automatically adjusts to the sea conditions, without the need for expensive electric or hydraulic hardware and switches. The system constantly reacts to the water conditions, boat speed, and balance providing remarkable improvements on any boat.

Part No. 55163 55164 55166 55168

Boat Length 3.6m to 4.6m 4.3m to 5.2m 4.6m to 5.8m 4.9m to 6.2m

HP 25HP - 35HP 40HP - 80HP 60HP - 140HP 140HP - 150HP