spk001-3_im

SPK001 SPK002 MARINE STEREO 2 WAY

COAXIAL SPEAKERS

T e c h n i c a l s p e c i f i c a t i o n s & C U T T IN G T E M PLA T E

Mounting instructions PRECAUTIONS

CONNECTING

1 Please avoid contact with inside speaker wire

1. Attach the speaker wires (supplied) to the speaker terminals be sure to connect the striped wire to the negative (–) terminal, and the other wire to the positive (+) terminal of the speaker.

2 Do not change the polarity of the speaker terminal assembly

To Amp /Stereo

3 Make sure lead and speaker terminals do not contact metal.

Connect the other end of the speaker wires to your amplifier/stereo.

4 When making connections, please refer to the instruction manual of marine stereo used.

2. Remove the speaker grille (turn anti-clockwise). Fit the speaker into the cutout and secure the speaker using the screws (supplied).

MOUNTING

Replace the speaker grille on the speaker (turn clockwise) until the grille locks into place.

1. When mounting the SPK001 in the kick panel, make sure there is a clearance of 55 mm (2.17”) behind the well.

When mounting the SPK002 in the kick panel, make sure there is a clearance of 65 mm (2.56”) behind the well.

(5.7”) 145

SPK002

(4.8”) 123

SPK001

55 (2.17”)

65 (2.56”)

2. Push out the template from this leaflet and use to mark the position of the mounting screws and the outline of the speaker hole. Drill the mounting holes and cut the hole for the speaker.

PAGE 2

T E C H N IC A L S P ECI FI CATI O N A N D CU TTI N G TEMPLATE

SPK0 01/SPK002

lle

ho

gri

) out

sh Pu ( le

ou

t)

Sp ea ke r

Ou ter ed ge of s

er ak pe

sh (Pu

Mounting Example

Mounting Template for SPK001 Please push out.

SPK001 TEMPLATE SPK001/SPK 002

T E C H N IC A L S P ECI FI CATI O N A N D CU TTI N G TEMPLATE

PAGE 3

SPK001 Cutting Template

PAGE 4

T E C H N IC A L S P ECI FI CATI O N A N D CU TTI N G TEMPLATE

SPK0 01/SPK002

ge of

lle

gri

Sp ea ke

Ou t er

ed

sp

r ke ea

sh (Pu

rh

ole

) out

o sh (Pu

ut)

Mounting Example

Mounting Template for SPK002 Please push out.

SPK002 TEMPLATE SPK001/SPK 002

T E C H N IC A L S P ECI FI CATI O N A N D CU TTI N G TEMPLATE

PAGE 5

SPK002 Cutting Template

PAGE 6

T E C H N IC A L S P ECI FI CATI O N A N D CU TTI N G TEMPLATE

SPK0 01/SPK002

Speaker driver specifications

System Power (Watts) Tweeter Efficiency (1W/1M) Frequency Response Impedance (Ohms) Weight - kgs, (lbs) Speaker Depth - mm (inches)

SPK001

SPK002

Coaxial woofer/tweeter

Coaxial woofer/tweeter

110

140

Neo PEI Dome

Neo PEI Dome

88 db

89 db

80 Hz–20 kHz

70 Hz–20 kHz

4

4

0.78 (1.72)

1.34 (2.95)

55 (2.17)

65 (2.56)

WARRANTY GME limit this warranty to the original purchaser of the equipment.

GME warrant the SPK001/SPK002 to be free from defects in material and workmanship for a period of thirty six (36) months from the date of purchase from their authorised retailer.

Should the product require servicing during this period, all labour and parts used to effect repairs will be supplied free of charge. GME reserve the right to determine whether damage has been occasioned by accident, misuse or improper installation whereby the warranty would be void, including equipment which has been damaged due to: (a) Incorrect or reverse polarity connection to a battery or power supply or to an incorrect supply voltage. (b) Operation without an antenna or by connection to an antenna which has been incorrectly installed, resulting in damage to the speaker’s output circuit.

Procedure to be followed by claimant: In the event of a defect occurring during the warranty period, the original purchaser may return the defective unit along with suitable proof of purchase date (i.e. receipt, docket, credit card slip etc.) and a full description of the defect to the retailer from whom the unit was purchased. All freight charges incurred for transportation by the retailer or GME are the purchaser’s responsibility.

GME AFTER SALES SERVICE Your speaker is especially designed for the environment encountered in land and marine installations. The use of all solid state circuitry, careful design and rigorous testing, result in high reliability. Should failure occur however, GME maintain a fully equipped service facility and spare parts stock to meet the customer’s requirements long after expiry of the warranty period.

(c) Effects of water or moisture penetration. (d) Non-factory modifications.

SPK001/SPK 002

T E C H N IC A L S P ECI FI CATI O N A N D CU TTI N G TEMPLATE

PAGE 7

A Division of

www.gme.net.au Head Office: SYDNEY- Locked Bag 2086, North Ryde N.S.W. 1670, Australia. T: (02) 9844 6666 F: (02) 9844 6600.

Melbourne 7 Micro Circuit, Dandenong South, Vic. 3165 T: (03) 9798 0988 F: (03) 9798 0177 Adelaide 14 Phillips St., Thebarton, S.A. 5031 T: (08) 8234 2633 F: (08) 8234 5138 Perth Unit 1, 10-12 Harvard Way, Canning Vale, W.A. 6155 T: (08) 9455 5744 F: (08) 9455 3110 Brisbane Unit 1, 89-101 Factory Rd., Oxley, Qld. 4075 T: (07) 3278 6444 F: (07) 3278 6555 Sydney Unit B, 22-24 College St., Gladesville, NSW. 2111 T: (02) 9879 8888 F: (02) 9816 4722 Auckland Unit 2, 24 Bishop Dunn Pl., East Tamaki, Manukau N.Z. 2013 T: (09) 274 0955 F: (09) 274 0959 For customers outside Australia and New Zealand, please contact your local GME retailer or email to: export@gme.net.au.

Part Number: 310439 Drawing Number: 44307-3

T E C H N IC A L S P ECI FI CATI O N A N D CU TTI N G TEMPLATE

SPK001/SPK002