Mobile Document Camera
http://152.1.189.114/CED_tutorials/mobile_document_camera.htm
Mobile Document Camera 1. Open the Elmo. The side will fold down. The best way to release the side pieces are to grab from the back of the and pull in an outward direction (See Figure 1).
Figure 1 2. Raise the neck up (See Figure 2).
Figure 1.2 3. The cable that connects the laptop to the projector, plug it in to the VGA port on the back on the Elmo into the RGB Output port . Plug this cable in to the RGB Output port.
1 of 4
10/30/2007 2:54 PM
Mobile Document Camera
http://152.1.189.114/CED_tutorials/mobile_document_camera.htm
Figure 1.3 5. The VGA cable that is in the black, connect one end to the RGB Input port. Connect the other end to the computer VGA port.
Figure 1.4 6. Retrieve the power chord from the black case. On the right side of the Elmo stand if facing the unit, plug it in to the round port labeled DC IN 12V. Plug the other end in to the wall outlet.
2 of 4
10/30/2007 2:54 PM
Mobile Document Camera
http://152.1.189.114/CED_tutorials/mobile_document_camera.htm
Figure 1.5 7. There are three toggle switches on the side above the power input. The bottom switch powers on the unit. The second switch switches from Elmo to the computer screen. The top switch turns the Lamp On.
Figure 1.6 8.. To Zoom in, use the Tele button on top of the camera. To zoom out, press the Wide button.
3 of 4
10/30/2007 2:54 PM
Mobile Document Camera
http://152.1.189.114/CED_tutorials/mobile_document_camera.htm
Figure 1.7 9. If the room is too bright or too dark, adjust the Gain on the right side of the camera. Press the Up button to make the screen brighter. Press the Down button to make the screen darker.
Figure 1.8 10. Remember to reconnected the projector to the back of the computer when you are finished using the unit.
Return to Main Page
4 of 4
10/30/2007 2:54 PM