catalogue custom coping
profiles
Custom coping is a fabricated edge along the side of a tile or paver. They are used to provide a smooth edge/boundary for pools, countertops, staircase steps, building corners, decks and verandahs. The most popular profiles are the drop edge and bullnose. Along with functional and safety benefits they help complete the look and aesthetically elevate your project.
half bullnose laminated full bullnose
Simple and modern round edge profile which suits just about any application. This economical profile is characterised by a delicate curved edge and flat bottom. Pool builders and designers love it, it’s perfect for stair nosing, skirting tiles and pool edging.
full bullnose
If your theme is uncluttered and minimalist, then this may be the profile for you. This neat, fully rounded edge is designed to offer soft and safe edges with a clean look.
A traditional profile for those who prefer a more prominent style than the full bullnose. This coping is great for providing an elegant heritage look. Our laminated products have a strip of the same tile bonded to the underside of the tile edge, then bullnosed with either a honed or polished finish.
mitred drop edge (50mm)
Our number 1 best seller. Mitred drop edges are best for a seamless modern look that descend in an L shape around your pool. Each piece is cut at a perfect 45 degree angle and is guaranteed to be free of chips and rough edges.
available ranges
External tiles
Alpine Atlas
Bologna MK2
Burlington Stone MK2
Canyon Stone
Como
Concept Stone
Concrete Fusion
Gaden
Glocal
Mexicana
Motley
Mystone Travertino
availability
External tiles
Orion
Orvieto
Pavillion
Pietra Di Ostuni
Pietra Lavica
Promenade
Quartziti
Regina
Riverdale
Storica
Studio 39
Tech Lab Evo
by state
Pavers (20mm porcelain)
Ascoli Travertine
Beaton
Ceppo
Mineral Pavers
Stone Age
Stone Union
Toorak
important note
1. Unsupported edges (the hang over) at the pool edge for half bullnose and full bullnose profiles must have a tile thickness minimum of 20mm or more.
2. Laminated full bullnose and mitered drop edge tiles must be fully supported with 100% adhesive coverage to the laminated or drop edge underside surface to ensure adequate support”.
3. Please note 10mm tiles unsupported at edges are not to be used as pool coping tiles.