PRODUCT CATALOGUE
product catalog
The Jonite Story The majesty of natural stone is perhaps best expressed by the magnificence of the stone castles of England. Inspired by the rustic appeal of natural stone, we wondered if the material could be used to make functional and beautiful grates. Yet, the sheer cost of using thick slabs of natural stone proved to be commercially unviable. Natural stone, although having aesthetic appeal, was too weak and unreliable to satisfy safety standards and requirements. A new solution had to be found. In 1994, Jonite pioneered the world’s first reinforced decorative stone grating. Incorporating the beauty of stone with uncompromising load bearing strength, the marriage of aesthetics and performance remained unchallenged in the industry. Inspired by the rustic appeal of natural stone, Jonite was developed through years of extensive research and development, leading edge technology and driven by a team of dedicated and passionate personnel. With over 20 years of being a manufacturer of architectural and decorative stone grates, Jonite is your partner in hardscape design. At Jonite, we recognise the transformational potential of space. With our eye for detail, exquisite craftsmanship and the infinite possibilities we offer in texture and colour, our engaging designs complement the vision of international architects and designers. Today we are proud to offer you the durability, sustainability and sheer beauty of natural stone with Jonite.
Jonite, Your Green Partner Jonite aims to protect the environment by incorporating at least 30% recycled content in our products. The use of Jonite in place of steel and cast iron will contribute to the lowering of carbon emissions from the steel and iron work industries worldwide.
Jonite is your partner in green and sustainable design. Green Label certified, Jonite meets the Singapore Environment Council's requirements for 30% or more recycled content. In the drive towards sustainable construction, the Building and Construction Authority of Singapore Green Mark scheme recognises the use of Green Label certified products and awards merit points for their usage.
Through the LEEDÂŽ (Leadership in Energy and Environmental Design) green building certification programme, the U.S. Green Building Council is transforming the built environment. As a member of the USGBC and with the usage of recycled content, Jonite products contribute toward satisfying MR Credit 4: Recycled Content under LEED. The LEED Green Building Rating System is the nationally accepted benchmark for the design, construction and operation of high performance green building in the U.S.A.
product catalog
CHANNEL GRATES
PERFORMANCE • Light Duty (A15) • Heavy Duty (B125) • Extra Heavy Duty (C250) • Custom Heavy Duty (D400, E600, F900) APPLICATION • Pedestrian areas • Light Vehicular areas • Heavy Vehicular areas • Fire Engine Access and Aircraft moving areas COMPLIANCE Compliant with BS EN 124:1994 COMPATIBLE DRAIN WIDTH 75mm to 425mm on Channel Grates) THICKNESS 25mm to 75mm MATERIAL Jonite Stone (reinforced) OPTIONAL • Custom Sizes, Colours and Patterns • L-Trimmers • Stud Trimmers • Heel-guard Grates • Custom Curve Grates • Custom Lockable Grates • Custom Grates for Highly Corrosive Environments STANDARD COLOURS Please refer to Colour Samples
Jonite Stone (reinforced) Channel Grates have redefined the role of gratings in the architectural industry. With Jonite, gratings have moved beyond merely being functional into the realm of design elements. Durability The unique material properties of Jonite products which prevents rust and corrosion mean they are equally suited to last a lifetime for both indoor and outdoor applications. High Load Performance Jonite Stone (reinforced) Channel Grates are engineered to sustain load performances from pedestrian to vehicular according to the standards as specified, and are compliant with International Standards such as BS EN 124:1994 & BS EN 1433:2008. High Mechanical Properties Jonite absorbs much less heat from the Sun than traditional ferrous gratings, making it a more comfortable material to have around the house and in children’s playgrounds. In addition, it has tremendous slip resistance tested by international classifications. This provides a much-needed safety feature.
CHANNEL GRATES Optional Features and Accessories
Heel-Guard Grates
Lockable Grates
Specially designed with elegant ladies in mind, Jonite’s Heel-Guard Grates have slim 6mm slots and small radius fillets to prevent high heels from being caught in the grates. Compliant with Americans with Disabilities Act (ADA) requirements, these are extremely useful for cut-off or scupper drains of the entrance or concourse areas of a building.
Jonite gratings are relatively safe from vandals even without a locking system. Metal gratings are most commonly stolen to be sold for scrap; Jonite has no scrap value and is thus safe from theft. However, it is a mandatory requirement in many countries for public gratings to have locking systems installed. Our Lockable Grates are customisable to any size.
L-Trimmers
Custom Curve Grates Of Various Radii
L-Trimmers are always recommended for gratings built for heavy-duty applications and above. They are designed to provide aesthetic flair as well as ideal support for all Jonite gratings.
Jonite Curve Grates are available in any radius at an affordable cost. We also maintain a list of Custom Curve Grates for architects to keep costs low. This list is available upon request.
product catalog
SUMP COVERS
PERFORMANCE • Light Duty (A15) • Heavy Duty (B125) • Extra Heavy Duty (C250) • Custom Heavy Duty (D400, E600, F900) APPLICATION • Pedestrian areas • Light Vehicular areas • Heavy Vehicular areas • Fire Engine Access and Aircraft moving areas COMPLIANCE Compliant with BS EN 124:1994 COMPATIBLE DRAIN WIDTH Please refer to General Specifications on Sump Covers THICKNESS 25mm to 75mm MATERIAL Jonite Stone (reinforced) OPTIONAL • Custom Sizes, Colours and Patterns • L-Trimmer Frames • Stud Trimmer Frames • Heel-Guard Grates • Custom Lockable Grates • Custom Hinged System • Splines • Customisation of Grates for Highly Corrosive Environments STANDARD COLOURS Please refer to Colour Samples
Jonite Sump Covers are designed to be used on point drainage systems, intermediaries of open channel drainage as well as kerb-side discharge. With load capabilities similar to channel grates, our Jonite Sump Covers offer style, security and functionlity. Cost-Effective And Sustainable Jonite Sump Covers come in a wide range of standard sizes that can be assembled with the addition of Jonite splines to form huge covers, giving you cost effectiveness and sustainability. For bigger multiple covers, a metal sub-frame may be used. However, the sub-frame must be designed to sustain the required loading on the entire cover.
product catalog
SUMP COVERS Optional Features and Accessories
Lockable System The optional Lockable System feature for our Sump Covers is available upon request and is available for all applications and sizes. The L-Trimmer Frame comes with embedded nuts and stainless steel 304 fastening bolts.
Hinged System The optional Hinged System feature for our Sump Covers is available upon request and is suitable for all applications and sizes. The exposed hinge components are made of stainless steel 304 with weather-proof polyurethane dampers.
Spline
L-Trimmer Frames L-Trimmer Frames are mainly used for supporting sump covers, especially for heavy-duty applications and above. They provide a perfect flat surface and seating allowance to maximise performance of the sump cover. Our frames are aesthetically designed to work within the overall look and feel of the area.
Multiple Sump Covers Using Metal Spline Method Huge Sump Covers may not be attainable in Jonite, but using Jonite’s standard Sump Covers in sectional form is a more cost effective solution. They are supported by metal splines specially designed to sustain the required loads as illustrated.
Splines Splines are available in matching look and feel to the grates they are used with. They are reinforced and strengthened to sustain the load of two or more covers, according to the load required. Both ends of the spline must be embedded into the concrete with sufficient seating of the recommended sump.
product catalog
CREATIVE GRATES
PERFORMANCE • Pedestrian: Light Duty (5KN-A15) (Strictly for pedestrian use only) • ADA Compliant (Selected models only) APPLICATION • Pedestrian COMPATIBLE DRAIN WIDTH 60mm to 260mm (Please refer to General Specifications on Creative Grates) THICKNESS 19mm to 35mm MATERIAL Jonite Stone (reinforced) OPTIONAL • Custom Sizes, Colours and Patterns • L-Trimmers • Stud Trimmers STANDARD COLOURS Please refer to Colour Samples
Our Jonite Creative Grates inspire originality on a different level. A variety of more creative designs have also been created for enhanced sensibilities. Creative Collection Jonite Creative Grates come in four categories: Pattern, Nature, Modern and Avant-Garde Collections. Our comprehensive range offers a multitude of themes and designs for architects to choose from. Should you need to look for something special, Jonite’s custom design services is always ready to take on the challenge of customising a design just for you. Specific Load Constraints These creative grates are suitable strictly for pedestrian use at 5KN static loading (i.e. approximately six to seven persons standing on one piece of grate). However, heavy loading capacities are achievable with customised solutions from our Design Services.
product catalog
CREATIVE GRATES A new concept in creativity
*Specially designed for pool grates
Chiseled Rain (The Avant-Garde Collection) Patterned with natural chisel marks, Chiseled Rain’s geometrical abstraction lends itself well to a variety of themes; whether contemporary or traditional, western or oriental.
Rain Swing (The Avant-Garde Collection)
Cross Stitch (The Modern Collection)
Capture the dynamic motion of raindrops while reliving the tranquility of it. The Rain Swing collection carefully exuberates the delicate contours, weaving details to its majestic outlook. Discover the charms within and experience the serendipity of the Rain Swing.
Cross Stitch is simple in design but presents a higher performance than most of the other designs. Its weave pattern displays an elegant contemporary outlook of a timeless design.
product catalog
POOL GRATES
PERFORMANCE Pedestrian: Light Duty (6KN) (Strictly for pedestrian use only) COLLECTION • BabyPebbles • ChiseledRain APPLICATION • Pool Overflows • Pool Decks • Home Scuppers COMPATIBLE DRAIN WIDTH 190mm to 310mm (Please refer to General Specifications on Pool Grates) THICKNESS 25mm to 30mm MATERIAL Jonite Stone (reinforced)
(Surface texture is smoother than Channel Grates and Tree Grates)
OPTIONAL • Custom Sizes, Colours and Patterns • Custom Curves • L-Trimmers • Stud Trimmers
Swimming pools are no longer seen as just an amenity; they are today part of an enticing landscape. With its natural good looks and suitability superior to natural granite, Jonite makes for the perfect pool grates.
STANDARD COLOURS Please refer to Colour Samples
Toddler-Friendly The small elliptical holes of Baby Pebbles and thin slit slots of Chiseled Rain eliminate the danger of toddlers catching their toes in the grating.
OTHER APPLICATIONS • Water Feature Grates • Underwater Grates
Consistency Of Colour Jonite’s low water absorption of 0.5% enables gratings to maintain their colour when in contact with pool water, unlike natural granite and stone slabs.
(Darker colours are suitable only for non-chlorinated water systems.)
POOL GRATES Optional Features and Accessories
Custom Curve Grate Jonite Curve Grates are available in any radius at an affordable cost. We also maintain a shortlist of Custom Curve Grates for architects to keep costs low. This list is available upon request.
Grate Tiles And 90째 Corners Pool Grates
Stud Trimmers
Grate Tiles are used in irregular drain connections, and are cut according to site requirements by the installer.
This feature improves the efficiency of the flow rate of an existing pool grate. They can also be used individually for non-perforated granite or stone slabs which are well under the acceptable flow rate.
Available in limited models only, the 90째 Corners Pool Grates allow a perfect perpendicular turn.
product catalog
FLOOR TRAPS
PERFORMANCE • Pedestrian: Light Duty (6KN) (Strictly for pedestrian use only) • Vehicular: Heavy Duty (up to B125) (For selected models/customise only) APPLICATION • Pool decks • Home drains • Landscape areas COMPLIANCE Compliant with PSB SS 213:1979 (unless otherwise stated) THICKNESS 25mm to 45mm (Please refer to General Specifications on Floor Traps) MATERIAL Jonite Stone (reinforced) OPTIONAL • Custom Sizes, Colours, Textures and Patterns • Universal Adaptors • PVC Strainers • Foul Air Restrainer STANDARD COLOURS Please refer to Colour Samples
Jonite has created the world’s first stone homogenous floor trap, achieving desired spontaneity through functional designs. Our aim is to continue designing floor traps that blend seamlessly into any flooring. Versatile Colour-Matching Jonite is available in a wide range of standard colours developed to assist architects to quickly pick the colour they need. More specialised colours are also possible with our unlimited Colour Customisation process which allows Jonite to be calibrated to any hue or shade desired. Functionality And Sustainability Jonite Foor Traps are engineered to fulfil crucial functions while remaining an integral component of the structural floor. Waterproofing is foremost in our designs, as is the prevention of infiltration by insects and foul air. Special PVC strainers and restrainers fitted with our Floor Traps work to achieve a much cleaner environment.
product catalog
FLOOR TRAPS Floor-bonded
Tile-Up Collection Clean, seamless and corrosion free, our Tile-Up Collection uses existing floor tiles with slit gaps as the solution preferred by architects. Developed in answer to the usual option of raw concrete screeds, unstable covers and untidy holes, the Tile-Up Collection is aesthetically pleasing, easily to install and an effective system. Mini shower traps and other customisable shapes are also available.
Classic Collection Retaining the features of conventional floor traps, the classic collection is exclusive with the use of Jonite stone, durable yet aesthetically pleasing. You will be pampered with a choice of 16 different standard colors or limitless custom colors to suit your application.
Modern Collection Complete your drain application with style and practicality; our modern collection offers everything except the mundane features of a typical floor trap. The irregular design allows smoother particle filtration into the pipes and gives way to easy cleaning.
Hinged Collection
PVC Foul-Air Restrainer And PVC Strainer
Do away with the hassle of handling of floor traps; our Hinged Collection is the perfect partner for applications that requires frequent access to the pipes for cleaning. Cleaning and maintenance can now be instant and fast without the hesitation of lifting the floor traps.
Jonite Floor Traps are designed to accomodate PVC strainers and Foul-air Restrainers to prevent insects and unpleasant odours from arising. Hair clots around floor traps will also become a thing of the past.
product catalog
TREE GRATES
PERFORMANCE • Strictly pedestrian only • ADA Compliant (Selected models only) APPLICATION • Pedestrian areas COMPATIBLE SIZES Please refer to General Specifications on Tree Grates THICKNESS 30mm MATERIAL Jonite Stone (reinforced) OPTIONAL • Custom Sizes, Colours, Textures and Patterns • Metal Supporting Frames • Special Design for Vehicular Loading • Special Design for Highly Corrosive Environment STANDARD COLOURS Please refer to Colour Samples
Available in a variety of designs, shapes and sizes, Jonite Tree Grates effortlessly integrate into the cityscape, providing space for trees to grow and develop. ADA compliant Complied to the Americans with Disabilities Act (ADA), selected Jonite Tree Grates are certified ADA compliant. This makes our tree grates popular in hospitals, clinics and residential areas. Night Illumination Jonite Tree Grates allows fully customisable light ports or sockets for the installation of many different types and sizes of lights for night illumination this will add an exciting dimension to the natural beauty of trees. Embossed Insignia With Jonite, you can easily emboss a corporate insignia or municipal logo right onto the tree grates in use in your environment, giving it an exclusive identity to the locale.
product catalog
TREE GRATES A Complete Tree Protection System Jonite Stone (reinforced) Tree Grates
Design Services
Jonite Stone (reinforced) Tree Grates come in a wide range of attractive designs, and are also customisable in terms of colours, sizes, designs and application.
Jonite’s advantage lies in its low tooling cost, passing on savings to architects and allowing them to customise and formulate new and creative aesthetics to support their design theme. Our team of designers are able to customise an identical design for both tree and channel grates, creating a beautiful combination. This integrated collection will stand to offer enhanced design choices for architects.
Metal Supporting Frames Usually assembled in two sections or more, Metal Supporting Frames are used in supporting the sectional panels of Jonite Tree Grates away from the soil. This maintains a good clearance for rooting and prevents soil compression caused by placing tree grates directly onto the soil surface.
Concrete Bases Concrete Bases can either be cast on site or prefabricated by a local contractor. The lower base openings allow excessive water to drain off, while the concrete base itself controls surface rooting, retaining good soil condition. In some cases, a complete concrete pit for the tree is incorporated into the ground.
TOILET GRATES
PERFORMANCE Pedestrian : Light Duty (6KN - A15) (Strictly for pedestrian only) COLLECTION Slotted Model Waveline Model APPLICATION Shopping Malls Public Toilets Schools, etc COMPLIANCE Compliant with BS EN 124:1994 (Selected models only) COMPATIBLE DRAIN WIDTH 150mm to 464mm (Please refer to General Specifications on Toilet Grates) THICKNESS 20mm to 25mm MATERIAL Jonite Stone (reinforced) OPTIONAL Custom Sizes, Colours and Patterns Custom Curves STANDARD COLOURS Please refer to Colour Samples
Jonite Toilet Grates have redefined the way public toilets are seen. With natural stone textures and contemporary designs, Jonite has truly transformed the landscape of a toilet. Beautiful Yet Functional Jonite Toilet Grates are beautifully crafted yet created to serve a specific need of dispersing excess and unwanted liquids in highly populated public toilets. Be it in urinals, wash basins or even in cubicles, Jonite Toilet Grates performs purposefully and more. Easy Cleaning Having low water absorption characteristics, Jonite Toilet Grates are not so suspectible to stains. Without the need to use acid wash, our toilet grates are easy to maintain.
TOILET GRATES Toilets redeďŹ ned
R8
9
Rounded Edge Profiles With its specially rounded curve profiles, liquids are easily flushed away from the surface of the grates. This prevents any liquids from stagnating on the surface as well as easy cleaning and maintenance. Even with the rounded curve profiles, the matte stone textures still provides a natural slip resistance.
Slotted Design
Waveline Design Customisation Jonite Toilet Grates comes in two standard designs, the Slotted and the Waveline, they are fully customisable, in terms of colours, designs, sizes and textures, they are all available upon request.
STREET BENCHES
The Banco Series
Banco BR 300
PERFORMANCE • General Public • Weatherproof APPLICATION • Public Nature Parks • Commercial Open Spaces • Outdoor Amenities COMPATIBLE SIZES Refer to General Specifications on Street Benches MATERIAL • Jonite Stone (reinforced) OPTIONAL • Special Design to Architect’s Specification • Special LED lightings embedment • Custom Sizes, Colours, Textures & Patterns • Custom Metal or Timber Panels integration • Custom Anchorage System subject to ground condition and substrates used STANDARD COLOURS Please refer to Colour Samples
Jonite brings you the first collection of Banco Series Street Benches for nature parks and open spaces. An exciting new concept by attempting to eliminate the perception of conventional bulky and heavy stone furniture. Philosophy The Banco Series is created using contemporary, ergonomic and versatile designs of structure elements such as pedestals and panels using various Jonite creative panels. Customisable with unlimited colours, patterns & textures. Alternatively, it allows integration with other materials tastefully with simplicity, reducing installation time as well as customisation cost. Custom Design on Panel Grates The Banco Benches can easily create special designs representing a corporate insignia or municipal logo on the panel-grate, giving an exclusive identity to the parks or commercial open spaces.
STREET BENCHES Stylishly modular Custom accessories derived from the same design theme such as trashbins, bollards and signages.
Top-Arc Component
The assembling time for the Banco BR 300, 2 seater takes less than 10 minutes with 2 men
Standard Panel-Grate
Lower-Arc Component
Mini PanelGrate (back)
Intermediate Pedestal Centre-Arc Component
Fastened stainless steel stud-rods through the pedestals and capped with plugs
Mini PanelGrate (front)
Fastened to the floor through the pedestal with expanded bolting system capped with plugs
Banco BR 300
End Pedestal
Standard Panel-Grate 500
50
500
50
50
500
Intermediate Pedestal
638
Lower-Arc Component
Mini PanelGrate (front) 1150mm (2 Seater)
End Pedestal
Banco
1700mm (3 Seater)
SS 210
823
780
638
Substrate Concrete Base
447
447
Dome-plug Final Floor Level
Free standing w/o ground anchorage is available for all designs. Special surface base-plate may be required depending on application.
Dome-plug Final Floor Level
Tile / Carpet Embedded Anchorage Fixing System (may be required depending on type of construction)
Embedded Anchorage Fixing System Concrete Base
(may be required depending on type of construction)
50
product catalog
CUSTOMISATION
Jonite’s Design Department comprises of a team of creative designers and experienced engineers working in close collaboration with our Research and Development team. With our integrated operations, we bring you a one-stop support service that assists architects all the way from design concept to the final physical product. Customisation For All Standard Products Our design services are able to customise all Jonite standard products such as pool grates, channel grates, sump grates, floor traps and tree grates in terms of size, application and even special functions as required. Unique Technology Jonite is a proprietary formulation and original technology that can be applied to more than just the standard products currently in our catalogue. Eminently attractive, Jonite presents endless possibilities in size, colours, performance and application and is limited only by one’s imagination. Solution Ideas A vast range of products in architectural, construction and even industrial applications such as cladding, bollards, street furniture, containment, external feature walls and machine base can be achieved. We listen to your requirements, producing feasible proposals that aim to achieve cost effectiveness, functionality, practicality and aesthetics.
product catalog
CUSTOMISATION Realising your ideas
Our design team is dedicated to working hand-in-hand with architects and designers to overcome the constraints of different materials so as to achieve the designs of your visions.
Bespoke Designs Designs on Jonite products can be tailor-made to suit any application for any environment, empowering architects to make bold and imaginative statements.
Corporate Logos Corporate logos or municipal insignias can be easily embossed onto the products, adding an exclusive identity to any project.
Submergible Vertical Grate An extremely strong and durable vertical grate to be used underwater for dolphin pools, constructed with no metal fasteners, yet aesthetically pleasing and functional.
Circular Grate For Water Feature Commissioned for use within a hard-standing area, this grate boasts a D400 (11.5 tonne wheel-load) performance. Laboratory testing for strength and destruction was carried out prior to production to ensure utmost safety.
Vertical Facades Enhancing any hardscape is easy with Jonite. The flexibility of customisation in the material would allow it to fit into any environment, whether indoors or outdoors.
Home And Street Furniture Working with perforations, textures, fusion of materials and customised designs, the possibilities of creating home or street furniture are limitless.
product catalog
ACCESSORIES for Standard Products Extend functionality and add more flair to standard Jonite Channel Grates, Sump Covers, Pool Grates and Tree Grates.
Channel Grates 90° Corner Grate (Channel Grates/Pool Grates)
Tile Strips (Channel Grates/Sump Covers)
Grate Shim (Channel Grates/Sump Covers)
L-Trimmer (Channel Grates/Pool Grates)
90° Corner Grate Available in limited channel and pool grate categories only. In place of the corner grate, two pieces of regular grates may be used. However, for heavy duty and above applications, it is advisable to incorporate a spline below the grate to sustain the required load.
Custom Curve Grate (Channel Grates/Pool Grates)
Grate Shims And Tile Strips A Grate Shim is a flat strip of various thickness and approximately 30mm width, used to raise the grating to the desired height. It is fused permanently to the base of the grating during the fabrication process. Tile Strips give an added flair to the edge of gratings covering concrete drains. Installable with SealFix™ 103, these tile strips are approximately 10mm thick and made of similar material as the grating.
‘L’ Curve Trimmer
Grate Tile (Channel Grates/Pool Grates)
Custom Curve Grates And L-Curve Trimmers Jonite curve grates are available in any radius at an affordable cost. We also maintain a shortlist of custom curve grates for architects to keep costs low. This list is available upon request.
Sump Grates
Grate Tiles Grate Tiles are used when a drain encounters an irregular joint. The light duty models may be cut on site by the installer. Heavy duty and above models should be factory fabricated according to templates attained from site by the installer.
L-Trimmer Frame (Sump Covers only)
Spline (Sump Covers)
L-Trimmers And L-Trimmer Frames L-Trimmers and L-Trimmer Frames are recommended for Heavy Duty Gratings and above, providing aesthetical flair and high performance support for channel grates and sump covers.
Splines Splines are available in matching look and feel to the grates they are used with. They are reinforced and strengthened to sustain the load of two pieces of grates or more, according to the load required. Both ends of the spline must be embedded into the concrete with sufficient seating of the recommended sump.
product catalog
ACCESSORIES for Standard Products 285
Pool Grates 300
Tree Grates
240
Reducer (Tree Grates)
Tree Grate Reducers Reducers come in various inner and outer diameters and simple universal patterns, enabling them to suit various tree-grate models. Its main purpose is to allow a simple removal when the growth of the tree requires expansion of the tree grate.
Pool Grate Blank Ends Blank Ends come with a wider allowance of 50mm on each side of the grate for trimming, thus creating curvature without using curve grates. Alternatively, they can also be used for end pieces with odd lengths.
MAINTENANCE Accessories Repair Kit
Jonite, like any other natural stone material, can be chipped by hard or sharp objects at impact or damaged as a result of mishandling. Our handy Repair Kit, an epoxy putty filler system, allows you to easily make needed repairs. The pre-mixed filler comes in standard colours that can be custommatched as required. The repair is not superficial; rather it fuses to the core of the affected area as an integral unit, creating an even stronger bond than its original state. This formulation is specially designed for Jonite products only.
SealFix™ 103
ShieldFix™ 108
Kleansol™ 511
Lifting Hooks
SealFix™ 103 is a two-part epoxy mortar specially formulated for fixing Jonite components such as L-Trimmers or Frames used for heavy-duty performance. It has high strength bonding, is impermeable and chemical-resistant and suitable for ‘dry-fixing’.
All Jonite products are impregnated with a film of ShieldFix™ 108, a clear stone sealer. It acts as a protective veil during installation and handling. It has a very high compressive strength, remarkable cohesion and superior hardness and high wear-and-tear resistance, it is suitable even for driveways.
A new propriety solution, Kleansol™ 511 is a stain and algae removal solution specially formulated for soiled Jonite products, especially pool grates. For normal cleaning, apply the solution to the surface for 15 to 30 minutes before scrubbing or water-jetting. For heavily soiled gratings, soak for a day or two.
Lifting hooks are used for the installation and removal of gratings. Most gratings are designed with an up-lift force of less than 50kg, requiring only a maximum of two people to lift. For heavier gratings, a pair of T-hooks is recommended. T-hooks are available in steel and various materials to suit different sizes of gratings, and can also be used to pick up small pieces of gravel stuck between grating slots during maintenance.
Surface Preparation Surface to be sealed must be flat, solid and stable. All loose particles, oil, paint, wax or any substance that may inhibit adhesion must be removed. Adequate preparation via suitable mechanical means like scrabbling, grit blasting or needle gunning is crucial.
Surface Preparation 1. ShieldFix™ 108 is a two-component solvent-based coating in a matt finish. 2. Re-coating is possible if attempted in a proper environment and clean surface condition, using the correct application method.
Packing 1. Available in 1-litre, 5-litre and 25litre packing. PVC containers of 75litre and 125-litre capacity for soaking are available upon request. 2. Glass marbles for the stacking of gratings during soaking are also available upon request.
product catalog
LOADING SPECIFICATION Compliant with BS EN 124:1994 Static Load
Understanding Loads Affecting Grates: Static Loads refers to load applied vertically to the grating with no other movement, such as load from a stationary vehicle. TEST BLOCK
This is classified as in BS EN 124:1994 Test-loads Table:
Class A15 B125 C250
Text-load KN 15 125 250
Class D400 E600 F900
Test-load KN 400 600 900
Wheel Load
Wheel-loads refer to the weight of the vehicle and its typical load depending on the type of the wheels. Pneumatic tyres spread the load like the test-block in the illustration and solid tyres post a greater point load, which is only recommended for Class E600 and F900. Vehicle movement, speed, braking and traffic frequency are the consolidated consideration of dynamic loads.
Vehicle Moving
Dynamic Load
Dynamic Effect
Selection Of Appropriate Load Class According To BS EN 124:1994 Group 1 – (Class A15)
Group 4 – (Class D400) Areas strictly for pedestrians and pedal cyclists. House drains, pool decks, courtyards, park-walkways and pedestrian compound within precincts.
Group 2 – (Class B125)
Carriageways of roads, hard- standing areas for fire-engine access and packing areas for heavy vehicles. Generally for slow-moving vehicles not exceeding 11.5 tonnes in wheelload.
Group 5 – (Minimum Class E600) Public footways and comparable areas, car porches and parks. Generally for slow-moving vehicles not exceeding 3 tonnes in wheel-load.
Group 3 – (Class C250)
Areas imposing high wheel-loads such as docks, airfield pavements and heavy forklift loadings. Generally for slow-moving vehicles not exceeding 20 tonnes in wheel-load.
Group 6 – (Minimum Class F900) Used as curb-side grates in heavy vehicle parking areas and entrances of small precincts. Generally for slow-moving vehicles not exceeding 5 tonnes in wheel-load.
Areas imposingparticularly high wheel-loads such as airport taxiway amd vehicles with soild tyres. Generally for slow-moving vehicles exceeding 20 tonnes in wheel load.
product catalog
INSTALLATION Using the right methods Typical Installation of Light-Duty Gratings Pedestrian Load
2 to 3mm gap
Pedestrian Load
2 to 3mm gap
Drain Width
Drain Width
Install with Metal ‘L’ Fish Tail.
Install directly on the flat and level concrete or tiles.
Typical Installation of Heavy-Duty Gratings And Above Vehicular Load
3 to 4mm gap
1.5 to 3mm gap
Vehicular Load
Drain Width
Drain Width SealFix™ 103
Install with Inverted or Fabricated ‘L’ metal to allow a 90° seating, which prevents breaking caused by ‘point seating’.
Install with Jonite L-Trimmer using Dry Fixing method by SealFix™ 103 (Epoxy Motar).
Vehicular Load Extruded ‘L’
Drain Width Inverted or Fabricated ‘L’ NOT RECOMMENDED FOR HEAVY DUTY APPLICATION
Mild-steel extruded ‘L’ section is not flat on the inner side, thus reducing the seating area and weakening the grating during heavy application. A chamfered corner as seen may not overcome the situation. Alternatively, the Inverted or Fabricated ‘L’ metal allows a perpendicular seating of the grating.
Point Seating effect occurs when the grate is not seated perpendicular to the ‘L’ section.
Installation Orientation The Right Orientation For Gratings Installation
The Incorrect Orientation For Gratings Installation
Drain Surface Opening Shoulder Height Shoulder Width
Drain Width
NOTE: All channel grates including sump covers are designed and strengthened based on the transverse direction or the width of the grates. Drain Shoulder
GENERAL SPECIFICATIONS
LANDSCAPE
DRIVEWAY
STANDARD CHANNEL GRATES ALL LOAD CLASSES ARE IN COMPLIANCE WITH EN124.1994
GRATINGS:- Generally there are 5 types of standard widths that are able to cover openings from 75mm to 385mm. S1 is suitable for scupper drain indoors and outdoors, C1 to C3 are for most common house drains including carporches. C4 is used for wider drains such as in parks, commercial and industrial surrounds.
S1
PART NO.
WEIGHT
MODEL
DRAIN WIDTH
LOAD CLASS
ACTUAL GRATING SIZE
C1
31110
3 kg
S1-125H25LD
75 to 90mm
A15
125W x 500L x 25mm(t)
31111
6.5 kg
S1-125H25HD
75 to 85mm
B125
125W x 500L x 25mm(t)
31112
4 kg
C1-210H25LD
128 to 170mm
A15
210W x 500L x 25mm(t)
31113
8.5 kg
C1-210H35HD
128 to 160mm
B125
210W x 500L x 35mm(t)
31114
6 kg
C2-292H25LD
210 to 242mm
A15
292W x 500L x 25mm(t)
31115
10 kg
C2-292H35HD
210 to 232mm
B125
292W x 500L x 35mm(t)
31116
8 kg
C3-355H25LD
273 to 305mm
A15
355W x 500L x 25mm(t)
31117
15 kg
C3-355H35HD
273 to 295mm
B125
355W x 500L x 35mm(t)
31118
13 kg
C4-435H35LD
345 to 385mm
A15
435W x 420L x 35mm(t)
31119
28 kg
C4-435H50HD
345 to 375mm
B125
435W x 420L x 50mm(t)
C2
C3
HIGH PERFORMANCE CHANNEL GRATES ALL LOAD CLASSES ARE IN COMPLIANCE WITH EN124.1994 C4
HIGH PERFORMANCE GRATINGS:- This range of gratings is specially designed for heavy loading applications such as car-park entrances, hard-standing areas, driveways and kerb sides. L-Trimmers are strongly recommended to be used to ensure a flat and level seating of gratings. PART NO.
WEIGHT
MODEL
DRAIN WIDTH
LOAD CLASS
ACTUAL GRATING SIZE
C250 D400
210W x 500L x 35mm(t)
C250 D400
292W x 500L x 35mm(t) 292W x 500L x 50mm(t)
C250 D400
355W x 500L x 75mm(t)
32110
12 kg
C1-210H35EHD
128 to 150mm
32111
C1-210H50CHD
128 to 150mm
32112
17 kg 15 kg
C2-292H35EHD
210 to 230mm
32113
24 kg
C2-292H50CHD
210 to 230mm
32114
27 kg
C3-355H50EHD
273 to 285mm
32115
47 kg
C3-355H75CHD
273 to 285mm
32116
45 kg
C4-435H70EHD
345 to 365mm
C250
435W x 420L x 70mm(t)
32125
52 kg
C4-435H75CHD
345 to 365mm
D400
435W x 420L x 75mm(t)
32117
113 kg
D1-167H35EHD
100 to 117mm
17.5 kg
D1-167H50CHD
100 to 117mm
C250 D400
167W x 750L x 35mm(t)
32118 32121
38 kg
D3-495H75EHD
395 to 425mm
C250
495W x 370L x 75mm(t)
32122
44 kg 16.5 kg
D3-495H75CHD
395 to 425mm
D400
495W x 370L x 75mm(t)
32123
BW1-260H50EHD*
200mm
C250
260W x 500L x 50mm(t)
32124
25 kg
BW2-400H50EHD*
330mm
C250
400W x 500L x 50mm(t)
210W x 500L x 50mm(t)
D1
355W x 500L x 50mm(t) D3
167W x 750L x 50mm(t)
BW1
*BW1 & BW2 models are designed with broad slots of 35mm wide. It has maximum water breaking efficiency. BW2
CUSTOM-CUT CHANNEL GRATES ALL LOAD CLASSES ARE IN COMPLIANCE WITH EN124.1994
CUSTOM-CUT GRATINGS:- This range of gratings is specially designed for replacement purposes without any form of construction work on existing drains. The longitudinal side of the gratings has a wider edging so that they can be cut to attain required widths. The cutting of the grating must be pre-attained and factory cut. PART NO.
WEIGHT
MODEL
DRAIN WIDTH
LOAD CLASS
ACTUAL GRATING SIZE
33110
7 kg
CC1-275H25LD
140 to 225mm
A15
275W x 500L x 25mm(t)
33111
12 kg 14 kg
CC1-275H35HD
140 to 215mm
B125
275W x 500L x 35mm(t)
CC1-275H35EHD
140 to 205mm
C250
275W x 500L x 35mm(t)
CC2-330H25LD
200 to 280mm
A15
330W x 500L x 25mm(t)
33114
7.5 kg 16 kg
CC2-330H35HD
200 to 270mm
B125
330W x 500L x 35mm(t)
33115
23 kg
CC2-330H50EHD
200 to 260mm
C250
330W x 500L x 50mm(t) 50mm
33112
CC1
CC2
CC1 min. width: 180mm for LD & 200mm for HD & EHD
33113
CC2 min. width: 250mm for LD & 270mm for HD & EHD
33116
15 kg
CC3-410H35LD
275 to 360mm
A15
410W x 500L x 35mm(t)
33117
22 kg
CC3-410H35HD
275 to 350mm
B125
410W x 500L x 35mm(t)
33118
29 kg
CC3-410H50EHD
275 to 340mm
C250
410W x 500L x 50mm(t)
CC3
CC3 min. width: 335mm for LD & 345mm for HD & EHD
All products are fully customisable in design and sizes if required.
DESIGN SERVICES
Jonite reserves the right to change the designs or specifications without notice
GENERAL SPECIFICATIONS
LANDSCAPE
DRIVEWAY
COMPONENTS FOR CHANNEL GRATES PART N0.
WEIGHT
MODEL
LOAD CLASS
ACTUAL GRATING SIZE
o
A15
Suitable for standard C1-210H25LD
o
B125
Suitable for standard C1-210H35HD
o
C250
Suitable for standard C1-210H35EHD
o
A15
Suitable for standard C2-293H25LD
o
B125
Suitable for standard C2-292H35HD
o
C250
Suitable for standard C2-292H35EHD
A15
Suitable for standard C3-355H25LD
o
B125
Suitable for standard C3-355H35HD
o
C250 A15
Suitable for standard S1-125H25LD
34110C
3.5 kg
90 C1-H25LD
34111C
5 kg
90 C1-H35HD
34112C
6 kg
90 C1-H35EHD
34113C
90 C2-H25LD
34114C
7 kg 11 kg
34115C
13 kg
34116C
10 kg
90 C2-H35EHD o 90 C3-H25LD
34117C
19 kg
90 C3-H35HD
34118C
28 kg
90 C3-H50EHD
34119C
1.7 kg
90 S1-H25LD
34120C
3 kg
90 S1-H25HD
B125
Suitable for standard S1-125H25HD
34121C
1.5 kg
L-TRIMMER-25LD
N.A
60W x 500L x 35mm(t)
34122C
2 kg
L-TRIMMER-35HD/EHD
N.A
60W x 500L x 50mm(t)
34123C
3 kg
L-TRIMMER-50EHD/CHD
N.A
65W x 500L x 65mm(t)
34124C
3.8 kg
L-TRIMMER-70EHD/CHD
N.A
65W x 420L x 85mm(t)
34125C
L-TRIMMER-75EHD/CHD L-SLIM-TRIMMER-25LD/HD
N.A
65W x 500L x 90mm(t)
34126C
4.5 kg 0.5 kg
40W x 500L x 35mm(t)
34127C
0.6 kg
TS-50-LD (Tile-Strip)
N.A N.A
34128C
0.8 kg
TS-50-HD/EHD (Tile-Strip)
N.A
50W x 500L x 15mm(t)
34129C
10 kg
GT-400H25LD (Grate-Tile)
A15
400W x 400L x 25mm(t)
34130C
12 kg
GT-500H25LD (Grate-Tile)
A15
500W x 500L x 25mm(t)
34131C
14 kg
GT-400H35HD (Grate-Tile)
B125
400W x 400L x 35mm(t)
34132C
16 kg
GT-500H35HD (Grate-Tile)
B125
500W x 500L x 35mm(t)
90 C2-H35HD
o
o
Suitable for standard C3-355H50EHD
50W x 500L x 10mm(t)
NOTE: All Grate-Tiles that are Heavy Duty and above must be pre-fabricated according to templates submitted by installers.
LD, HD & EHD L-TRIMMER
S1 CORNER GRATE
LD & HD GRATE-TILE LD & HD TILE-STRIP
C1, C2 & C3 CORNER GRATE
MAINTENANCE & MISCELLANEOUS ACCESSORIES PART N0.
WEIGHT
TYPE
DESCRIPTION
41110MA
N.A.
T-HOOKS for LD & HD
Mildsteel Welded Rod
2 pcs/set
41111MA
N.A.
T-HOOKS for EHD & CHD
Mildsteel Welded Rod
2 pcs/set 2 kg/set (gross wt.)
PACKING
41112MA
2 kg/set
REPAIR KIT for Standard Colours
2 Parts Epoxy Putty
41113MA
2 kg/set
2 Parts Epoxy Putty
2 kg/set (gross wt.)
41114MA
12 kg/set
REPAIR KIT for Custom Colours SEALFIX™ 103
2 Parts Epoxy Mortar
12 kg/set (gross wt.)
41115MA
1 kg/litre 1 kg/litre
SHIELDFIX™ 108 KLEANSOL™511
Protective Stone Sealer Algae & Stain Remover
1 litre 1, 5 & 25 litres
41116MA
Jonite reserves the right to change the designs or specifications without notice
All products are fully customisable in design and sizes if required.
DESIGN SERVICES
GENERAL SPECIFICATIONS
LANDSCAPE
DRIVEWAY
SUMP COVERS ALL LOAD CLASSES ARE IN COMPLIANCE WITH EN124.1994
PART NO.
WEIGHT
MODEL
PIT SIZE
LOAD CLASS
ACTUAL GRATING SIZE
51110
4 kg
SC300-300H25LD
250 x 250mm
A15
300W x 300L x 25mm(t)
51111
8 kg
SC300-300H35HD
230 x 230mm
B125
300W x 300L x 35mm(t)
51112
9 kg
SC300-600H25LD
250 x 550mm
A15
300W x 600L x 25mm(t)
51113
15kg
SC300-600H35HD
240 x 540mm
B125
300W x 600L x 35mm(t)
51114
12 kg
SC335-510H35LD
285 x 460mm
A15
335W x 510L x 35mm(t)
51115
18 kg
SC335-510H35HD
295 x 450mm
B125
335W x 510L x 35mm(t)
51116
20 kg
SC340-1000H35LD
290 x 950mm
A15
340W x 1000L x 35mm(t)
51117
30 kg
SC340-1000H35HD
280 x 940mm
B125
340W x 1000L x 35mm(t)
51118 51119
27 kg
SC385-923H35LD
335 x 873mm
A15
385W x 923L x 35mm(t)
35 kg
SC385-923H35HD
325 x 863mm
B125
385W x 923L x 35mm(t)
51120
10 kg
SC400-400H35LD
350 x 350mm
A15
400W x 400L x 35mm(t)
51121
16 kg
SC400-400H35HD
340 x 340mm
B125
400W x 400L x 35mm(t)
51122
19 kg
SC400-500H35LD
350 x 450mm
A15
400W x 500L x 35mm(t)
51123
26 kg
SC400-500H35HD
340 x 440mm
B125
400W x 500L x 35mm(t)
51124
23 kg
SC420-625H35LD
370 x 575mm
A15
420W x 625L x 35mm(t)
51125
SC420-625H35HD
360 x 565mm
B125
420W x 625L x 35mm(t)
51126
25 kg 28 kg
SC435-873H35LD
385 x 823mm
A15
435W x 873L x 35mm(t)
51127
42 kg
SC435-873H35HD
375 x 813mm
B125
435W x 873L x 35mm(t)
51128
16 kg
SC500-500H35LD
450 x 450mm
A15
500W x 500L x 35mm(t)
51129
25 kg
SC500-500H35HD
440 x 440mm
B125
500W x 500L x 35mm(t)
51130
20 kg
SC550-550H35LD
500 x 500mm
A15
550W x 550L x 35mm(t)
51131 51132
44 kg 16 kg
SC550-550H50HD
490 x 490mm 600 x 275mm
B125 A15
550W x 550L x 50mm(t)
SC650-325H35LD
51133
31 kg
SC650-325H50HD
590 x 265mm
B125
650W x 325L x 50mm(t)
SC300-300H25LD
SC300-600H25LD
SC400-400H35LD
SC500-500H35LD
650W x 325L x 35mm(t)
NOTE: It is advisable to reconfirm the pit size of the sump prior to order. SC550-550H35LD
HIGH PERFORMANCE SUMP COVERS ALL LOAD CLASSES ARE IN COMPLIANCE WITH EN124.1994
PART NO.
WEIGHT
MODEL
PIT SIZE
LOAD CLASS
ACTUAL GRATING SIZE
52110
35 kg
SSC350-700H50EHD
280 x 630mm
C250
350W x 700L x 50mm(t)
52117
64 kg
SSC350-700H75CHD
280 x 630mm
D400
350W x 700Lx 75mm(t)
52111
20 kg
SSC357-357H50EHD
277 x 277mm
C250
357W x 357L x 50mm(t)
52112 52114
25 kg
SSC357-357H50CHD
277 x 277mm
D400
357W x 357L x 50mm(t)
38 kg
SSC517-432H50EHD
447 x 362mm
C250
52115
SSC517-432H75CHD
447 x 362mm
52118 52119
53 kg 36 kg 65 kg
SSC500-500H50EHD SSC500-500H75CHD
430 x 430mm 430 x 430mm
D400 C250
517W x 432L x 50mm(t) 517W x 432L x 75mm(t)
52120 52121
35kg 45kg
SSC300-600H35EHD SSC300-600H50CHD
230 x 530mm 230 x 530mm
D400 C250 D400
500W x 500L x 50mm(t) 500W x 500L x 75mm(t)
SSC350-700H50EHD
SSC517-432H50EHD
300W x 600L x 35mm(t) 300W x 600L x 50mm(t)
TRIMMER FRAMES FOR SUMP COVERS PART N0.
WEIGHT
MODEL
TYPE OF COMPONENTS
53110C
4 kg
TRF300-300H25
suitable for SC300-300H25LD
53111C
6 kg
TRF300-300H35
suitable for SC300-300H35HD
53112C 53113C
6 kg 8 kg
TRF300-600H25 TRF300-600H35
suitable for SC300-600H25LD suitable for SC300-600H35HD
53114C
9 kg
TRF400-400H35
suitable for SC400-400H35LD / HD
53115C
10 kg
TRF500-500H35
suitable for SC500-500H35LD / HD
53116C
9 kg
TRF357-357H50
suitable for SC357-357H50HD / EHD
SSC500-500H50EHD
SSC300-600H35EHD
Jonite reserves the right to change the designs or specifications without notice
CUSTOM SPLINES Our Design Services would be able to assist you in determining the appropriate spline according to the sustaining load as required by the Sump Covers.
INTERNAL PIT SIZE
STANDARD TRIMMER FRAME
All products are fully customisable in design and sizes if required.
DESIGN SERVICES
GENERAL SPECIFICATIONS
LANDSCAPE
CREATIVE DESIGN GRATES ALL CREATIVE DESIGN GRATINGS ARE STRICTLY FOR PEDESTRIAN APPLICATION ONLY UNLESS SPECIFIED OTHERWISE
CREATIVE DESIGN GRATINGS:- This range of gratings are created with various floral or graphic designs that allows the gratings to blend in more aesthetically with different landscapes and architecture. The grates are limited to only pedestrian application.
PATTERN COLLECTION PART N0.
WEIGHT
MODEL
DRAIN WIDTH
LOAD CLASS
ACTUAL GRATING SIZE
61115
2 kg
BABY PEBBLES-86
56 to 62mm
A15
86W x 498L x 23mm(t)
61116
2.5 kg
BABY PEBBLES-122
80 to 100mm
6KN
122W x 498L x 19mm(t)
61110
2.5 kg
BABY PEBBLES-125
80 to 100mm
6KN
125W x 500L x 25mm(t)
61111
3 kg
BABY PEBBLES-150
100 to 125mm
6KN
150W x 500L x 25mm(t)
61112
5 kg
BABY PEBBLES-210
160 to 170mm
6KN
210W x 500L x 25mm(t)
61113
8 kg
BABY PEBBLES-300
245 to 260mm
6KN
300W x 500L x 35mm(t)
61114
4.5 kg
CRESTS-292
220 to 250mm
6KN
292W x 335L x 25mm(t)
61117
3.2 kg
KEYHOLES-122
92mm
A15
122W x 498L x 19mm(t)
61118
4.5kg
KEYHOLES-300
250mm
6KN
300W x 500L x 25mm(t)
BABY PEBBLES-86 BABY PEBBLES-122
BABY PEBBLES-125
BABY PEBBLES-150 BABY PEBBLE-210 BABY PEBBLE-300
KEYHOLES-122
CRESTS
KEYHOLES-300
NATURE COLLECTION PART N0.
WEIGHT
MODEL
DRAIN WIDTH
LOAD CLASS
ACTUAL GRATING SIZE
62110 62111
4 kg
FLORAL-300
250mm
6KN
300W x 380L x 25mm(t)
4 kg
LEAVES-310
210 to 260mm
5KN
310W x 335L x 25mm(t)
62112
5.5 kg
FOREST-300
250mm
5KN
300W x 500L x 25mm(t)
62113
3.3 kg
PALM-122
92mm
A15
122W x 498L x 19mm(t)
62114
5 kg
PALM-300
250mm
6KN
300W x 500L x 25mm(t)
FLORAL
FOREST
LEAVES
PALM-122
PALM-300
All products are fully customisable in design and sizes if required.
DESIGN SERVICES
GENERAL SPECIFICATIONS
LANDSCAPE
MODERN COLLECTION PART N0.
WEIGHT
MODEL
DRAIN WIDTH
LOAD CLASS
ACTUAL GRATING SIZE
63115
2.5 kg
CROSS-STITCH-86
60mm
A15
86W x 498L x 23mm(t)
63116
6.5 kg
CROSS-STITCH-122
92mm
A15
122W x 498L x 19mm(t)
63110
4 kg
CROSS-STITCH-300
250mm
6KN
300W x 500L x 25mm(t)
63111
5.5 kg
WAVELINE-210
160 to 170mm
A15
210W x 500L x 25mm(t)
63112 63114
5 kg 5 kg
SHREDDER-210 CUBOID-210
160 to 170mm 160 to 170mm
A15 6KN
210W x 500L x 25mm(t) 210W x 500L x 25mm(t)
63117
5 kg
INTERLACE-122
92mm
A15
122W x 498L x 19mm(t)
63118
4.5 kg
INTERLACE-300
250mm
6KN
300W x 500L x 25mm(t)
63119 63120
5 kg 4 kg
SQUARE-SLOTS-122 SQUARE-SLOTS-300
80mm 250mm
A15 A15
122W x 498L x 19mm(t) 300W x 500L x 25mm(t)
CROSS-STITCH-86 CROSS-STITCH-122 WAVELINE CROSS-STITCH-300
INTERLACE-122 SHREDDER
CUBOID INTERLACE-300
SQUARE-SLOTS-122
SQUARE-SLOTS-300
AVANT-GARDE COLLECTION PART N0.
WEIGHT
MODEL
DRAIN WIDTH
LOAD CLASS
ACTUAL GRATING SIZE
64115
3 kg
CHISELED-122
92mm
A15
122W x 498L x 19mm(t)
64116
4.5kg
CHISELED-300
250mm
6KN
300W x 500L x 25mm(t)
64110 64113
6.5 kg 6kg
CHISELED-RAIN-292 RAINING-300
220 to 250mm 250mm
6KN 6KN
292W x 500L x 25mm(t) 300W x 500L x 25mm(t)
64114
6 kg
RAIN-SWING-300
250mm
6KN
300W x 500L x 25mm(t)
CHISELED-122
CHISELED-RAIN
CHISELED-300
RAINING
All products are fully customisable in design and sizes if required.
RAIN-SWING
DESIGN SERVICES
GENERAL SPECIFICATIONS
LANDSCAPE
POOL GRATES BP245H25
ALL POOL GRATES ARE STRICTLY FOR POOL PEDESTRIAN APPLICATION ONLY
BABY PEBBLE COLLECTION PART N0.
WEIGHT
MODEL
DRAIN WIDTH
LOAD CLASS
ACTUAL GRATING SIZE
65110
3 kg
BP245H25
190 to 215mm
6 KN
245W x 300L x 25mm(t)
65111
3.5 kg 5 kg
BP300H25
240 to 270mm
6 KN
300W x 300L x 25mm(t)
BP350H30
280 to 310mm
6 KN
350W x 300L x 30mm(t)
65112
BP300H25
BP350H30
CHISELED RAIN COLLECTION PART N0.
WEIGHT
MODEL
DRAIN WIDTH
LOAD CLASS
ACTUAL GRATING SIZE
66110
3 kg
CR245H25
190 to 215mm
6 KN
245W x 300L x 25mm(t)
66111
3.5 kg
CR300H25
240 to 270mm
6 KN
300W x 300L x 25mm(t)
66112
5 kg
CR350H30
280 to 310mm
6 KN
350W x 300L x 30mm(t)
o
90 CORNER GRATE for all sizes
COMPONENTS FOR POOL GRATES BABY PEBBLE COMPONENTS PART N0.
WEIGHT
MODEL
67110C 67111C
3 kg 3.5 kg
90 BP245H25 o 90 BP300H25
67112C
6 kg
67113C 67114C 67115C
7 kg
Blank-Ends for all sizes
TYPE OF COMPONENTS
ACTUAL GRATING SIZE
BP Corner-Grate
Suitable for BP245H25
BP Corner-Grate
Suitable for BP300H25
90 BP350H30
BP Corner-Grate
Suitable for BP350H25
4 kg
BE-BP245H25
50mm *BLANK-ENDS for BP245H25
245W x 300L x 25mm(t)
5 kg
BE-BP300H25 BE-BP350H30
50mm *BLANK-ENDS for BP300H25
300W x 300L x 25mm(t)
50mm *BLANK-ENDS for BP350H25
350W x 300L x 30mm(t)
o
o
CR245H25
CR300H25
CHISELED RAIN COMPONENTS PART NO.
WEIGHT
MODEL
68110C
3 kg
90 CR245H25
TYPE OF COMPONENTS
ACTUAL GRATING SIZE
o
CR Corner-Grate
Suitable for CR245H25
68111C
3.5 kg
90 CR300H25
o
CR Corner-Grate
Suitable for CR300H25
68112C
6 kg
68113C
4 kg
90 CR350H30
CR Corner-Grate
Suitable for CR350H25
BE-CR245H25
50mm *BLANK-ENDS for CR245H25
68114C 68115C
5 kg
BE-CR300H25
50mm *BLANK-ENDS for CR300H25
245W x 300L x 25mm(t) 300W x 300L x 25mm(t)
7 kg
BE-CR350H30
50mm *BLANK-ENDS for CR350H30
350W x 300L x 30mm(t)
o
CR350H30
o
90 CORNER GRATE for all sizes
ALL POOL GRATE COMPONENTS PART NO.
WEIGHT
MODEL
TYPE OF COMPONENTS
ACTUAL GRATING SIZE
69110C
10 kg
PGT-400H25
POOL GRATE-TILE (regular)
400W x 400L x 25mm(t)
69111C
12 kg
PGT-500H25
POOL GRATE-TILE (large)
500W x 500L x 25mm(t)
69112C
11 kg
PGT-400H30
POOL GRATE-TILE (regular)
400W x 400L x 30mm(t)
69113C
13 kg
PGT-500H30
POOL GRATE-TILE (large)
500W x 500L x 30mm(t)
69114C
1.5kg
L-TRIMMER 25-PG
Suitable for all Pool Grates of 25mm(t)
60W x 300L x 35mm(t)
69115C
2 kg
L-TRIMMER 30-PG
Suitable for all Pool Grates of 30mm(t)
60W x 300L x 40mm(t)
69116C
1.6kg
STUDS-TRIMMER 25-PG
Suitable for all Pool Grates of 25mm(t)
60W x 300L x 35mm(t)
69117C
1.6kg
STUDS-TRIMMER 30-PG
Suitable for all Pool Grates of 30mm(t)
60W x 300L x 40mm(t)
Blank-Ends for all sizes
POOL GRATE-TILES for Regular or Large size
Jonite reserves the right to change the designs or specifications without notice
POOL GRATE L-TRIMMER
NOTE: 1. The part numbers stipulated here may not necessarily run in order. 2. The surface texture of the poolgrate is one grade smoother than gratings. 3. It is advisable to select lighter colours for pool grates due to white powdery deposits from chlorine in the pool unless non-chlorinated water is used. 4. *Blank-Ends are specially designed with 50mm more blank spacing on both sides of the grate for trimming during installation which will create a much neater appearance.
All products are fully customisable in design and sizes if required.
DESIGN SERVICES
POOL GRATE STUDS-TRIMMER
GENERAL SPECIFICATIONS
INTERIORS
LANDSCAPE
DRIVEWAY
FLOOR TRAPS ALL FLOOR TRAPS ARE STRICTLY FOR PEDESTRIAN APPLICATION ONLY
TILE-UP COLLECTION PART NO.
WEIGHT
MODEL
TYPE
OVERALL DIMENSION
71110 71111
1.5 kg 0.3 kg
FTUS-148/158 FTUS-90/100 Shower
Tile-up Trap (Square) Tile-up Trap (Shower Square)
158W x 158L x 30mm(t) 100W x 100L x 25mm(t)
HINGED COLLECTION
TILE-UP TRAP (Square)
TILE-UP TRAP
(All square base)
PART NO.
WEIGHT
72110
2 kg
72111
2.1 kg
FHS- 125/ 200 Blank
72112
2.3 kg
72113
1.2 kg
FHS- 125/ 200 Dome *FHS- 125/158
72114 72115
1.2 kg 1.3 kg
FHS- 125/158 Blank FHS- 125/158 Dome
MODEL *FHS- 125/ 200
(Shower Square)
TYPE
OVERALL DIMENSION
Hinged Trap (Large)
200W x 200L x 30mm(t)
Hinged Trap Blank (Large)
200W x 200L x 30mm(t)
Hinged Trap Dome (Large)
200W x 200L x 30(45)mm(t)
Hinged Trap (Square)
158W x 158L x 30mm(t)
Hinged Trap Blank
158W x 158L x 30mm(t)
Hinged Trap Dome
158W x 158L x 30(45)mm(t)
HINGED TRAP BLANK
CLASSIC COLLECTION MODEL
TYPE
PART NO.
WEIGHT
73110
0.9 kg
*FCR-145/165
Classic Round Trap
165mm Dia. x 30mm(t)
73111 73112
1 kg 0.25 kg
*FCSR-135/158
Classic Square Trap (with Round cover) Classic Shower Trap (Round)
158W x 158L x 30mm(t) 100mm Dia. x 25mm(t)
*FCR90/100 Shower
*HINGED TRAP
OVERALL DIMENSION
HINGED TRAP DOME
MODERN COLLECTION PART NO.
WEIGHT
MODEL
TYPE
74110
1 kg
FMAS- 135/158
Modern Americ Square
158W x 158L x 30mm(t)
74111
0.9 kg
Modern Americ Round
165mm Dia. x 30mm(t)
74112
0.9 kg
FMAR- 145/165 FMSR- 145/165
Modern Slotted
165mm Dia. x 30mm(t)
OVERALL DIMENSION
HINGED TRAP (Large)
DRIVEWAY COLLECTION
FLOOR TRAPS FOR HEAVY DUTY / LIGHT VEHICULAR APPLICATION (not exceeding 3 tonnes wheel-loads):-
PART NO.
WEIGHT
MODEL
TYPE
OVERALL DIMENSION
75110
4 kg 5 kg
FHS-158/200HD FHS-158/200HD Blank
Driveway Trap (B125) Driveway Trap Blank (B125)
200W x 200L x 45mm(t)
75111
200W x 200L x 45mm(t)
HINGED TRAP BLANK (Large)
ACCESSORIES PART NO.
WEIGHT
MODEL
TYPE
OVERALL DIMENSION
76110A
N.A.
PVC STRAINER LARGE
Suitable for 90mm outlet only
98mm Diameter x 44mm(t)
76111A
N.A.
PVC STRAINER SMALL
Suitable for 68mm outlet only
78mm Diameter x 40mm(t) *Compliant with PSB standards
*CLASSIC SQUARE TRAP
MODERN SLOTTED
MODERN AMERIC ROUND
MODERN AMERIC SQUARE
HINGED TRAP DOME (Large)
PVC STRAINER LARGE DRIVEWAY TRAP BLANK
PVC STRAINER SMALL
CLASSIC ROUND TRAP
DRIVEWAY TRAP
*CLASSIC SHOWER TRAP
Jonite reserves the right to change the designs or specifications without notice
All products are fully customisable in design and sizes if required.
DESIGN SERVICES
GENERAL SPECIFICATIONS
LANDSCAPE
TREE GRATES ALL TREE GRATES ARE STRICTLY FOR PEDESTRIAN APPLICATION ONLY
FIREWORK COLLECTION The Firework Collection is one of the most popular patterns available. This collection has broad profile openings with design patterns resembling enchanting bursts of fireworks. The Port holes have an opening of 260mm diameter with an optional cover that can be fixed permanently to the panel if lighting fixtures are not required. Optional reducers can also be used for the expandibility of the tree-wells. PART NO.
WEIGHT
81110
47 kg
81111
55 kg
81112
59 kg
81113
120 kg
81114
80 kg
81115
91 kg
81116
72 kg
81117
154 kg
81118
135 kg
81119
140 kg
81120 81121C
130 kg
MODEL FIREWORK S1000 FIREWORK S1100 FIREWORK S1200 FIREWORK S1500/600(optional light port) FIREWORK S1500/1100(optional light port) FIREWORK R1500/600 FIREWORK R1500/1100 FIREWORK S1800/600 FIREWORK S1800/750 FIREWORK R1800/600 FIREWORK R1800/750 FIREWORK REDUCER R600
9 kg
OVERALL DIMENSION
INNER WELL
PER SET
1000W x 1000L x 30mm(t) 1100W x 1100L x 30mm(t) 1200W x 1200L x 30mm(t) 1500W x 1500L x 30mm(t)
545mm Dia. 600mm Dia. 600mm Dia. 600mm Dia.
2pcs
1500W x 1500L x 30mm(t) 1500mm Dia. x 30mm(t) 1500mm Dia. x 30mm(t) 1800W x 1800L x 30mm(t) 1800W x 1800L x 30mm(t)
1100mm Dia. 600mm Dia. 1100mm Dia. 600mm Dia. 750mm Dia.
1800mm Dia. x 30mm(t) 1800mm Dia. x 30mm(t) 600mm Dia. x 30mm(t)
600mm Dia. 750mm Dia. 450mm Dia.
2pcs 2pcs 4pcs 4pcs 4pcs 4pcs 4pcs 4pcs 4pcs 4pcs 2pcs
(suitable for all Firework Models with 600mm Inner Well)
FIREWORK S1100 FIREWORK S1200 with REDUCER
FIREWORK S1500/600 c/w Light Port Holes
FIREWORK R1500/600 with REDUCER
FIREWORK COMBINATION with REDUCER
BLOSSOM COLLECTION Resembling the blooming of a flower, the Blossom Collection is simple and elegant with medium slot widths. The tree-well is not expandable and the collection is limited to 3 sizes. It does not have any port holes and if a lighting fixture is required, they have to be surface mounted. PART NO.
WEIGHT
82110
96 kg
82111
147 kg
82112
190 kg
MODEL
OVERALL DIMENSION
INNER WELL
PER SET
1320W x 1320L x 30mm(t)
500mm Dia. 500mm Dia. 500mm Dia.
4pcs 4pcs 4pcs
BLOSSOM S1320 BLOSSOM R1800 BLOSSOM S1800
1800mm Dia. x 30mm(t) 1800W x 1800L x 30mm(t)
BLOSSOM S1320 BLOSSOM R1800
BLOSSOM S1800
Jonite reserves the right to change the designs or specifications without notice
All products are fully customisable in design and sizes if required.
DESIGN SERVICES
GENERAL SPECIFICATIONS
LANDSCAPE
CONCENTRIC COLLECTION The Concentric Collection is a modern and contemporary design with the smallest slot width of 6mm which is both heels and wheelchair friendly. It has the maximum expandibility of tree-wells. This collection has the most comprehensive combination of Square, Semi-Circle or Quarter Circle sections that allows many different formations. The port holes have an opening of 260mm diameter with an optional cover that can be fixed permanently to the panel if a lighting fixture is not required.
PART NO.
WEIGHT
83110
34 kg
CONCENTRIC S800
800W x 800L x 30mm(t)
350mm Dia.
2pcs
83111
29 kg
CONCENTRIC R800
800mm Dia. x 30mm(t)
350mm Dia.
2pcs
OVERALL DIMENSION
MODEL
INNER WELL
PER SET
83112
34 kg
CONCENTRIC Combo SR800
N.A.
350mm Dia.
2pcs
83113
68 kg
CONCENTRIC S1000
1000W x 1000L x 30mm(t)
350mm Dia.
2pcs
83114
48 kg 58 kg
CONCENTRIC R1000
1000mm Dia. x 30mm(t)
350mm Dia.
2pcs
83115
CONCENTRIC Combo SR1000
N.A.
350mm Dia.
2pcs
83116
103 kg
CONCENTRIC S1200
1200W x 1200L x 30mm(t)
350mm Dia.
2pcs
83117
73 kg
CONCENTRIC R1200
1200mm Dia. x 30mm(t)
350mm Dia.
2pcs
83118
88 kg
CONCENTRIC Combo SR1200
N.A.
350mm Dia.
2pcs
83119
238 kg
CONCENTRIC S2000
2000W x 2000L x 30mm(t)
600mm Dia.
4pcs
83120 83121
235 kg 212 kg
CONCENTRIC S2000(w/light port) CONCENTRIC R2000(w/light port)
2000W x 2000L x 30mm(t) 2000mm Dia. x 30mm(t)
350mm Dia. 350mm Dia.
4pcs 4pcs
83122
247 kg
CONCENTRIC Combo SR2000(w/light port)
N.A.
350mm Dia.
4pcs
CONCENTRIC S2000 c/w Light Port Covers
CONCENTRIC R800
CONCENTRIC COMBO
PAVILLION COLLECTION The Pavillion Collection is a model that is inspired by timber plank flooring. A single sizeof 1500mm square with a rectangular tree-well. It has thin long slots of 7mm wide which can be considered heel-guard friendly.
PART NO.
WEIGHT
84110
29 kg
MODEL PAVILION S1500
OVERALL DIMENSION
INNER WELL
PER SET
1500W x 1500L x 30mm(t)
703 x 675mm
4pcs
WHEEL COLLECTION FIRE WHEEL:- This hypnotic design is a consolidated set of R2000 and R1000 tree grates. It has broad perforation for R2000 and medium perforation for R1000. Both set of tree grates can be used individually or as a combined set for a smaller tree-well. WAGON WHEEL:- This unique wheel design is a single size tree grate of R1800 with an optional reducer of R500 for added aesthetic flair or future expandibility. It comes with 2 small port holes of 75mm diameter which is catered for specific lighting fixtures. PART NO.
WEIGHT
85110
50 kg
85111
140 kg
85112 85113
MODEL
OVERALL DIMENSION
INNER WELL
PER SET
FIRE WHEEL R1000
1000mm Dia. x 30mm(t)
400mm Dia.
2pcs
FIRE WHEEL R2000
2000mm Dia. x 30mm(t)
1000mm Dia.
8pcs
130 kg
WAGON WHEEL R1800
800mm Dia.
4pcs
23 kg
WAGON WHEEL REDUCER R800
1800mm Dia. x 30mm(t) 800mm Dia. x 30mm(t)
500mm Dia.
2pcs
PAVILION S1500
WAGON WHEEL R1800 with REDUCER
FIREWHEEL R1000 in FIREWHEEL R2000
2000 1000
1800 800
Jonite reserves the right to change the designs or specifications without notice
All products are fully customisable in design and sizes if required.s
DESIGN SERVICES
GENERAL SPECIFICATIONS
LANDSCAPE
FANTASY COLLECTION The Fantasy Collection is a very exclusive set of designs with very broad and thin sets of perforation profiles. This allows the installation of lighting fixtures beneath the tree grate without the need of port holes. The tree-well is expandable to the limit of its pattern. PART NO.
WEIGHT
86110
148 kg
86111
165 kg
86112
137 kg
86113
125 kg
MODEL
OVERALL DIMENSION
INNER WELL
PER SET
FANTASY S1800/400
1800W x 1800L x 30mm(t)
400mm Dia.
4pcs
FANTASY S1800/650
1800W x 1800L x 30mm(t)
650mm Dia.
4pcs
FANTASY R1800/400
1800mm Dia. x 30mm(t)
400mm Dia.
4pcs
FANTASY R1800/650
1800mm Dia. x 30mm(t)
650mm Dia.
4pcs
FANTASY S1800
FANTASY R1800
BURNING SUN COLLECTION The Burning Sun Collection takes its design after the symbol of the Sun. Its S1500 model comes with 4 optional port hole covers. The R2000 model is a round tree grate with a huge tree-well in 8 identical sections. PART NO.
WEIGHT
OVERALL DIMENSION
INNER WELL
PER SET
87110
55 kg
87111
105 kg
BURNING SUN R1200
1200mm Dia. x 30mm(t)
400mm Dia.
2pcs
BURNING SUN S1500/450
1500W x 1500L x 30mm(t)
450mm Dia.
87112
4pcs
99 kg
BURNING SUN S1500/590
1500W x 1500L x 30mm(t)
590mm Dia.
87113
4pcs
138 kg
BURNING SUN R2000
2000mm Dia. x 30mm(t)
1200mm Dia.
8pcs
MODEL
BURNING-SUN S1500 (c/w Light Port Covers)
BURNING-SUN R1200
BURNING-SUN R2000
CARRIAGE COLLECTION The Carriage Collection is a highly expandable design that is very suitable for trees that grow very quickly. It has a simple and wide perforation profile and come in only two sizes; the R1200 & R1800.
PART NO.
WEIGHT
MODEL
OVERALL DIMENSION
INNER WELL
PER SET
88110
46 kg
CARRIAGE R1200
1200mm Dia. x 30mm(t)
450mm Dia.
2pcs
88111
140 kg
CARRIAGE R1800
1800mm Dia. x 30mm(t)
600mm Dia.
4pcs
CARRIAGE R1800 CARRIAGE R1200
Jonite reserves the right to change the designs or specifications without notice
All products are fully customisable in design and sizes if required.
DESIGN SERVICES
GENERAL SPECIFICATIONS
LANDSCAPE
STARCUT COLLECTION The Starcut Collection, with graphical designs resembling stars, comes in the form of square and rectangular panels that allow many different configurations to attain different sizes. It is a cost effective solution for a custom tree grate. A supporting frame must be designed to sustain the loading required. PART NO.
WEIGHT
89110
35 kg 18 kg
89111
OVERALL DIMENSION
INNER WELL
PER SET
STARCUT 1200
600W x 1200L x 30mm(t)
N.A.
N.A.
STARCUT 600
600W x 600L x 30mm(t)
N.A.
N.A.
4 Panels Formation
STARCUT 1200 (panel grate)
6 Panels Formation
STARCUT 600 (panel grate)
SQUARE MOSAIC COLLECTION The Square Mosaic Collection, a disorientation of different sizes of scattered mosaic brings out a chic and contemporary design. Its formation is very versatile for a tree grate with 500mm grid support. Similar to the Pebble Hole Collection, Tree-Rings can be used on various formations. PART NO.
WEIGHT
90110
15 kg
MODEL SQUARE MOSAIC 500
OVERALL DIMENSION
INNER WELL
PER SET
500W x 500L x 30mm(t)
N.A.
N.A.
SQUARE MOSAIC 500 (panel grate)
TREE-RING
STARGRATE COLLECTION This Stargrate Collection has designs expressing bursts of explosions resembling that of a star. This collection comes with medium sized slot widths and without port holes. The R2000 & R1800 tree-wells are designed to expand 40% of the design profile accordingly. The S4000 is a huge grate that is made of 16 sections forming a tree-well of 2000mm diameter. If required, R2000 can be combined with S4000 for a smaller tree-well. PART NO.
WEIGHT
MODEL
OVERALL DIMENSION
INNER WELL
PER SET
91110
72 kg
STARGRATE R1500
4pcs
140 kg
STARGRATE R1800
1500mm Dia. x 30mm(t) 1800mm Dia. x 30mm(t)
700mm Dia.
91111
600mm Dia.
4pcs
91112
198 kg
STARGRATE R2000/700
2000mm Dia. x 30mm(t)
700mm Dia.
4pcs
91113
172 kg
STARGRATE R2000/980
2000mm Dia. x 30mm(t)
980mm Dia.
4pcs
91114C
19 kg
STARGRATE REDUCER 400
700mm Dia. x 30mm(t)
400mm Dia.
2pcs
91115
800 kg
4000W x 4000L x 30mm(t)
2000mm Dia.
16pcs
(Suitable for all STARGRATE Models with 700mm Inner Well)
STARGRATE S4000
STARGRATE R1800
STARGRATE S4000
0
60
4000
0
200
0 70
STARGRATE R2000
STARGRATE R1500 c/w REDUCER Jonite reserves the right to change the designs or specifications without notice
All products are fully customisable in design and sizes if required.
DESIGN SERVICES
GENERAL SPECIFICATIONS
LANDSCAPE
PEBBLE HOLE COLLECTION The Pebble Hole Collection is a huge collection of many different panels of shapes and sizes to form many different formations of various shapes and sizes as required. Some Pebble Hole designs come with light port holes as well. Expandability is however limited due to the design of random holes. SMALL TREE GRATE PANELS
(Using multiple small Tree Grate Panels, various sizes of formation can be achieved. Tree-wells can be allocated anywhere within the panels)
PART NO.
WEIGHT
MODEL
92110
11 kg
92111 92112
12 kg 19 kg
92113C
6 kg
TREE-RING R400(450mm Cut Out Dia.)
92114C
9 kg
TREE-RING R600(650mm Cut Out Dia.)
92115C
35 kg
TREE-RING R2300(2350mm Cut Out Dia.)
OVERALL DIMENSION
INNER WELL
PER SET
PEBBLE-HOLE 460/443(panel grate)
460W x 443L x 30mm(t)
N.A.
N.A.
PEBBLE-HOLE 475/475 (panel grate) PEBBLE-HOLE 600/600 (panel grate)
475W x 475L x 30mm(t)
N.A.
N.A.
600W x 600L x 30mm(t) 500mm Dia. x 55mm(t)
N.A.
N.A.
N.A.
N.A.
700mm Dia. x 55mm(t) 2400mm Dia. x 55mm(t)
N.A.
N.A.
N.A.
N.A.
PEBBLE-HOLES 460/443 (panel grate)
PEBBLE-HOLES 475/475 (panel grate)
TREE-RING
PEBBLE-HOLES 600/ 600 (panel grate)
REGULAR TREE GRATE FORMATION
PART NO.
WEIGHT
MODEL
OVERALL DIMENSION
PER SET
INNER WELL
92116
34 kg
PEBBLE-HOLE R1000
1000mm Dia. 30mm(t)
450mm Dia.
2pcs
92117
70 kg
1200W x 1200L x 30mm(t)
450mm Dia.
4pcs
92118
60kg
PEBBLE-HOLE S1200 PEBBLE-HOLE R1500 (c/w light port 200mm Dia.)
1500mm Dia. x 30mm(t)
800mm Dia.
4pcs
92119
108 kg
PEBBLE-HOLE S1600 (c/w light port 200mm Dia.)
1600W x 1600L x 30mm(t)
800mm Dia.
4pcs
92120
100 kg
PH-HORSE SHOES (c/w light port 200mm Dia.)
2250W x 1500L x 30mm(t)
800 x 1550mm
2pcs
PH-HORSE SHOES (200mm Dia. Port Holes)
PEBBLE-HOLE R1000
PEBBLE-HOLE S1200
PEBBLE-HOLE R1500 (200mm Dia. Port Holes)
PEBBLE-HOLE S1600 (200mm Dia. Port Holes)
LARGE TREE GRATE FORMATION
OVERALL DIMENSION
INNER WELL
PER SET
PH SQ-LH 1000 (w/light port 200mm Dia.)
1000W x 1000L x 30mm(t) 1000W x 1000L x 30mm(t)
N.A. 1200mm Dia. (full formation)
N.A. N.A.
38 kg
PH SQ-RH 1000 (w/light port 200mm Dia.)
1000W x 1000L x 30mm(t)
1200mm Dia. (full formation)
N.A.
17 kg
750W x 750L x 30mm(t)
800mm Dia. (full formation)
N.A.
22 kg
PH SHACLE-CURVE 750 PH SHACKLE 750A (w/light port 200mm Dia.)
750W x 750L x 30mm(t)
800mm Dia. (full formation)
N.A.
24 kg
PH SHACKLE 750
750W x 750L x 30mm(t)
800mm Dia. (full formation)
N.A.
PART NO.
WEIGHT
92121
54 kg
MODEL PH SQUARE 1000 (panel grate)
92122
38 kg
92123 92124 92125 92126
PH SHACKLE 750
PH SQUARE 1000 (panel grate)
10 Panels Formation (5000mm x 2000mm)
PH SQ-LH 1000
PH SHACKLECURVE 750
PH SQ-RH 1000
4 Panels F ormation (2000mm x 2000mm)
8 Panels SHACKLE Formation (3000mm x 1500mm)
PH SHACKLE 750A
4 Panels SHACKLE Formation (1500mm x 1500mm) or (1500mm Dia.) Jonite reserves the right to change the designs or specifications without notice
All products are fully customisable in design and sizes if required.
DESIGN SERVICES
GENERAL SPECIFICATIONS
LANDSCAPE
THE PEBBLE HOLE COLLECTION
HOT DIP GALVANIZED METAL SUPPORT FRAME
Pebble Hole panel grates can be used as tree grates for huge existing trees which are off-centre from common tree-grates formation. The metal support frame below can be adjusted together with the panel grates to accommodate any position of the tree-well.
All tree-grates require supporting frames except tree-grates that come in 2 sections and are 1200mm or less in size. These are optional and come separately for each individual model.
a. Di
Di
86 0m m
Dia
86 0m m
mm
1200
1500
2000
a.
2000
3000
NOTE: Metal support frame - All tree grates that exceed 2 sections/panels and or above the size of 1200mm in size should be incorporated with metal supports. (metal support is optional/excluded and is separately specified.)
CENTRICAL COLLECTION The Centrical Collection is a simple and modern design comprising of 16 pieces of small curve grates forming a huge tree-well of 4000mm diameter or 3200mm diameter with a tree-well of 2400mm diameter. The tree-well is expandables as required according to the design profile constraint. Its slot width is a mere 12mm and can be easily assembled. Within the tree-well of 2400mm diameter various diameters of inserts or reducers can be achieved via customisation. PART NO.
WEIGHT
93110
260 kg
93111
208 kg
MODEL CENTRICAL R4000(Curve Panel Grates) CENTRICAL R3200 (Curve Panel Grates)
OVERALL DIMENSION
INNER WELL
PER SET
4000mm Dia. x 30mm(t)
2400mm Dia.
3200mm Dia. x 30mm(t)
2400mm Dia.
16pcs 16pcs
FALLEN LEAVES COLLECTION The Fallen Leaves Collection comes in 3 circular radii, R2000, R3000 & R5000. The R2000 has a tree-well of 600mm, the R3000 is a bigger tree grate that has a tree-well of 2000mm diameter and the R5000 is the biggest with a tree-well of 3000mm. A dazzling formation can be formed by combining all 3 tree grates. PART NO.
WEIGHT
94110
144 kg
94111
245 kg
94112
440 kg
MODEL
OVERALL DIMENSION
INNER WELL
PER SET
FALLEN LEAVES R2000
2000mm Dia. x 30mm(t)
600mm Dia.
8pcs
FALLEN LEAVES R3000
3000mm Dia. x 30mm(t)
2000mm Dia.
8pcs
FALLEN LEAVES R5000
5000mm Dia. x 30mm(t)
3000mm Dia.
48pcs
THREAD-BALL COLLECTION The Thread-Ball Collection comes in 4 curved sections and creatively formed into a playful thread-ball design that is suitable for all contemporary theme. PART NO.
WEIGHT
95110
82 kg
MODEL THREAD-BALL R1500
OVERALL DIMENSION
INNER WELL
PER SET
1500mm Dia. x 30mm(t)
560mm x 560mm
4pcs
FALLEN LEAVES COMBINATION
2400
CENTRICAL R4000
4000
3000 5000
2000
1500
560
THREAD-BALL R1500 Jonite reserves the right to change the designs or specifications without notice
All products are fully customisable in design and sizes if required.
DESIGN SERVICES
GENERAL SPECIFICATIONS
INTERIORS
LANDSCAPE
TOILET GRATES ALL TOILET GRATINGS ARE STRICTLY FOR PEDESTRIAN APPLICATION ONLY UNLESS SPECIFIED OTHERWISE
TOILET GRATES:- This range of grates were specially created for mass usage in heavy populated malls and public areas. With its rounded curved profiles, liquids can be easily flushed away from the surface. This prevents liquids from stagnating on the surface of the grates as well as easy cleaning and maintenance.
SLOTTED COLLECTION PART NO.
WEIGHT
MODEL
DRAIN WIDTH
LOAD CLASS
ACTUAL GRATING SIZE
12110
4.8 kg
TGS-200
159mm to 164mm
A15
200W x 500L x 25mm(t)
12111
5 kg
TGS-210
169mm to 174mm
A15
210W x 500L x 25mm(t)
12112
6 kg
TGS-250
209mm to 214mm
A15
250W x 500L x 25mm(t)
12113
7 kg
TGS-300
259mm to 264mm
A15
300W x 500L x 25mm(t)
TGS - 200
TGS - 210
TGS - 250
TGS - 300
WAVELINE COLLECTION PART NO.
WEIGHT
MODEL
DRAIN WIDTH
LOAD CLASS
ACTUAL GRATING SIZE
11110
4 kg
TGW-185
A15
11111
5 kg
TGW-210
150mm to 155mm 169mm to 174mm
A15
185W x 500L x 20mm(t) 210W x 500L x 25mm(t)
11112
5.3 kg
TGW-220
179mm to 184mm
A15
220W x 500L x 25mm(t)
11113
6 kg
TGW-250
209mm to 214mm
A15
250W x 500L x 25mm(t)
11114 11115
6.6 kg 7.5 kg
TGW-275
234mm to 239mm 459mm to 464mm
A15
275W x 500L x 25mm(t) 500W x 250L x 25mm(t)
TGW-500
TGW - 185
6KN
TGW - 210
TGW - 220 TGW - 500 TGW - 250
TGW - 275
COMPONENTS FOR TOILET GRATES SLOTTED COLLECTION COMPONENTS PART NO.
WEIGHT
MODEL
14110
2.9 kg
90 TGS-200
14111
3 kg
90 TGS-210
o o
DRAIN WIDTH
LOAD CLASS
ACTUAL GRATING SIZE
159mm to 164mm 169mm to 174mm
A15
SUITABLE FOR TGS-200
A15
SUITABLE FOR TGS-210
DRAIN WIDTH
LOAD CLASS
ACTUAL GRATING SIZE
209mm to 214mm 459mm to 464mm
A15 A15
SUITABLE FOR TGW-250
WAVELINE COLLECTION COMPONENTS PART NO.
WEIGHT
MODEL
13110
7.6 kg
o
13111
12.5 kg
o
90 TGS - 200
90 TGW-250 o 90 TGW-500
SUITABLE FOR TGW-500
o
90 TGS - 210
o
90 TGW - 250
o
90 TGW - 500
Jonite reserves the right to change the designs or specifications without notice
All products are fully customisable in design and sizes if required.
DESIGN SERVICES
GENERAL SPECIFICATIONS
INTERIORS
LANDSCAPE LANDSCAPE
STREET BENCHES The Banco Collection created using contemporary, ergonomic and versatile designs of structure elements such as pedestals and panels using various creative components. Customisable with unlimited colours, patterns & textures.
BANCO COLLECTION BR SERIES PART N0.
WEIGHT
MODEL
ACTUAL BENCH SIZE
21110 21111
140 kg
BR 300-2 SEATER
1150L x 823W x 780mmH
190 kg
BR 300-3 SEATER
1700L x 823W x 780mmH
BR 300
SS SERIES PART NO.
WEIGHT
MODEL
ACTUAL BENCH SIZE
21112 21113
125 kg
SS 210-2 SEATER
1150L x 638W x 447mmH
168 kg
SS 210-3 SEATER
1700L x 638W x 447mmH
SS 210
Note: 1. All Banco Collection come without installation & assembly. All components are in knockdown system. 2. All Banco Collection are either mounted permanently by authorised installer or assembled free standing by incorporating stainless steel stands which comes separately.
All products are fully customisable in design and sizes if required.
DESIGN SERVICES
Jonite reserves the right to change the designs or specifications without notice
GENERAL SPECIFICATIONS
LANDSCAPE
USA DECORATIVE GRATES ALL CREATIVE DESIGN GRATINGS ARE STRICTLY FOR PEDESTRIAN APPLICATION ONLY UNLESS SPECIFIED OTHERWISE
USA DECORATIVE GRATES:- Specifically designed to fit compatible catch basins and channels, this range of gratings comes in a variety of modern, ornate or nature-inspired designs which are ADA compliant. The grates are limited to only pedestrian application.
BASIN GRATES PART N0.
WEIGHT
MODEL
LOAD CLASS
ACTUAL GRATING SIZE
U31110
5.7 kg 5.2 kg
U31112
5.8 kg
U31113
5.6 kg
U31114
6 kg
U31115
5.3 kg
BG-CHISELED-300 BG-CROSS-STITCH-300 BG-KEYHOLES-300 BG-INTERLACE-300 BG-PALM-300 BG-PEBBLES-300
A15
U31111
6KN
300W x 300L x 29mm(t) 300W x 300L x 29mm(t) 300W x 300L x 29mm(t) 300W x 300L x 29mm(t) 300W x 300L x 29mm(t) 300W x 300L x 29mm(t)
U31116
5.5 kg
BG-SQUARE-SLOTS-300
A15
300W x 300L x 29mm(t)
CHISELED
CROSS-STITCH
KEYHOLES
A15 A15 A15 A15
INTERLACE
PALM
PEBBLES
SQUARE-SLOTS
TRENCH GRATES PART N0.
WEIGHT
MODEL
LOAD CLASS
ACTUAL GRATING SIZE
U32110
3 kg
A15
U32111 U32112
2.8 kg 3.2 kg
U32113
3.6 kg
U32114
3.3 kg
U32115
124W x 500L x 19mm(t) 124W x 500L x 19mm(t) 124W x 500L x 19mm(t) 124W x 500L x 19mm(t) 124W x 500L x 19mm(t) 124W x 500L x 19mm(t)
U32116
2.8 kg 3 kg
TG-CHISELED-124 TG-CROSS-STITCH-124 TG-KEYHOLES-124 TG-INTERLACE-124 TG-PALM-124 TG-PEBBLES-124
A15
U32117
6 kg
TG-SQUARE-SLOTS-124LD TG-SQUARE-SLOTS-124HD
A15 A15 A15 A15 6KN B125
124W x 500L x 19mm(t) 124W x 500L x 19/35mm(t)
CHISELED
CROSS-STITCH
KEYHOLES
INTERLACE
PALM
PEBBLES
SQUARE-SLOTS LD
SQUARE-SLOTS HD
MINI GRATES PART N0.
WEIGHT
U33112 U33115
MODEL
LOAD CLASS
ACTUAL GRATING SIZE
2.5 kg
MG-INTERLACE-78
A15
78W x 610L x 21/25mm(t)
2.1 kg
MG-PEBBLES-78
A15
78W x 610L x 21/25mm(t)
INTERLACE
PEBBLES Jonite reserves the right to change the designs or specifications without notice
All products are fully customisable in design and sizes if required.
DESIGN SERVICES
GENERAL SPECIFICATIONS
LANDSCAPE
USA TREE GRATES USA TREE GRATES COLLECTION:- Deliberately designed to match the USA Decorative Grates, the USA Tree Grate Collection is designed to be lockable, ADA (Americans with Disabilities Act) Compliant and with expandable inner diameters. With the exception of Square-Slots model, all tree grates have inner rings which are expandable to 460mm, 530mm & 600mm when required.
CHISELED PART NO.
WEIGHT
U41110
86 kg
U41111
135 kg
OVERALL DIMENSION
INNER WELL
PER SET
CHISELED S1200
1200mm x 1200mm x 30mm(t)
390mm Dia.
2pcs
CHISELED S1500
1500mm x 1500mm x 30mm(t)
390mm Dia.
4pcs
OVERALL DIMENSION
INNER WELL
PER SET
MODEL
CHISELED S1200 CHISELED S1500
KEYHOLES PART NO.
WEIGHT
MODEL
U42110
90 kg
KEYHOLES S1200
1200mm x 1200mm x 30mm(t)
390mm Dia.
2pcs
U42111
140 kg
KEYHOLES S1500
1500mm x 1500mm x 30mm(t)
390mm Dia.
4pcs
OVERALL DIMENSION
INNER WELL
PER SET
KEYHOLES S1200 KEYHOLES S1500
CROSS-STITCH PART NO.
WEIGHT
MODEL
U43110
86 kg
CROSS-STITCH S1200
1200mm x 1200mm x 30mm(t)
390mm Dia.
2pcs
U43111
135 kg
CROSS-STITCH S1500
1500mm x 1500mm x 30mm(t)
390mm Dia.
4pcs
CROSS-STITCH S1200 CROSS-STITCH S1500 Jonite reserves the right to change the designs or specifications without notice
All products are fully customisable in design and sizes if required.
DESIGN SERVICES
GENERAL SPECIFICATIONS
LANDSCAPE
INTERLACE PART NO.
WEIGHT
U44110
87 kg
MODEL INTERLACE S1200
U44111
136 kg
INTERLACE S1500
OVERALL DIMENSION
INNER WELL
PER SET
1200mm x 1200mm x 30mm(t)
390mm Dia.
2pcs
1500mm x 1500mm x 30mm(t)
390mm Dia.
4pcs
OVERALL DIMENSION
INNER WELL
PER SET
INTERLACE S1200 INTERLACE S1500
PALM PART NO.
WEIGHT
MODEL
U45110
90 kg
PALM S1200
1200mm x 1200mm x 30mm(t)
390mm Dia.
2pcs
U45111
140 kg
PALM S1500
1500mm x 1500mm x 30mm(t)
390mm Dia.
4pcs
INNER WELL
PER SET
PALM S1200 PALM S1500
SQUARE-SLOTS PART NO.
WEIGHT
MODEL
OVERALL DIMENSION
U46110
84 kg
SQUARE-SLOTS S1200
1200mm x 1200mm x 30mm(t)
390Wx390L
2pcs
U46111
132 kg
SQUARE-SLOTS S1500
1500mm x 1500mm x 30mm(t)
390Wx390L
4pcs
SQUARE-SLOTS S1200 SQUARE-SLOTS S1500 Jonite reserves the right to change the designs or specifications without notice
All products are fully customisable in design and sizes if required.
DESIGN SERVICES
product catalog
COMPLIANCE AND STANDARDS The ‘USGBC Member Logo’ is a trademark owned by the U.S. Green Building Council and is used by permission. The logo signifies only that Jonite Private Limited is a USGBC member; USGBC does not review, certify, or endorse the products or services offered by its members.
‘LEED’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.
022-016 Eco-Friendly Building Material
ISO 9001:2008 / FS 73051
BS EN 124:1994 Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control This European Standard applies to gully tops and manhole tops with a clear opening up to and including 1000 mm, for installation within areas subjected to pedestrian and/or vehicular traffic.
www.jonite.com
Copyright Š Copyright Reserved 2015. The materials, drawings and the design shown here are the exclusive property of Jonite Pte Ltd. It shall not be copied nor its contents communicated or reproduced in any form and for any purpose without the prior specific authority in writing of Jonite Pte Ltd. Disclaimer All reasonable care has been taken in compiling the information in this catalogue. All recommendations and suggestions on the use of Jonite products are made without guarantee since the conditions of use are beyond the control of the Company. It is the customer’s responsibility to ensure that each product is fit for its intended purpose and that the actual conditions of use are suitable and appropriate.
This catalogue and any advice provided by Jonite Pte Ltd are free of change and accordingly, no liability of any kind (including liability for negligence) will attach to the Company or its agents arising out of or in connection with or in relation to this catalogue or any such advice. Any goods supplied by the Company will be supplied solely upon its standard conditions of sale, copies of which are available on request. The company’s policy of continuous product development and improvements renders specifications liable to modification. Information provided in this catalogue is therefore subject to change without prior notification.