PRODUCTS CATALOG
April 2007
MADE IN USA
Evolution and eFeDeA are Odontit’s Osseointegrated Dental Implant Systems. This system was developed in 1986 based on criteria of ease of use and simplicity. The Self-Tapping Implant has a smooth, highly polished collar of 2 mm height that allows to use it with both submerged and semi-submerged techniques, one- or two-stage surgical procedure. The threaded body of the implant is doubly acid-etched, which generates a rough surface that helps reduce the loading time. This system is in full compliance with FDA regulations and Good Manufacturing Practice. All system components go through strict QC inspection procedures and have a tight tolerance of ±.0005 inch (0.01 mm). Implants are supplied in a sterile double container with Implant Mount and Cover Screw. Implant containers have a removable patient chart label for future reference.
In view of the spread of implants of all kinds, qualities, prices, and origin within the dental-implant market, we wish to remind you that ODONTIT complies with recognized legal and health standards. The approval of these standards requires strict manufacturing procedures and exhaustive quality controls. These norms allow you not to be worried and your patient to be safe; they are your support and aim to protect you, guaranteeing that you are using APPROVED products. Do not get your malpractice insurance cover withdrawn. You have invested plenty of time and effort in training, equipment, and day-to-day improvement, do not uselessly put your peace of mind, prestige and patrimony in risk using products that give you no additional benefit but do put you in a vulnerable position. Our Company has the authorizing certificates provided by the A.N.M.A.T.- Department of Health and Environment. A.N.M.A.T. Web Page: www.anmat.gov.ar
www.odontit.com • info@odontit.com
Tel. (54-11) 4825-0221 • Fax (54-11) 4903-9330 Azcuénaga 1077 • 4ºD • C1115AAE • Ciudad Autónoma de Buenos Aires • Argentina
eFeDeA Implants
.048
EFEDEA IMPLANT - MADE IN USA
FDA Self-Tapping Implant Rough Surface by Double Acid Etching & Sand Blasting - Cover Screw Made in Titanium-2nd grade Characteristics: Single Point Internal Thread PLATFORM: 4.1 mm DIAMETER: 3.75, 4.00 & 5.00 mm LENGHTS: 8, 10, 11.5, 13 & 15 mm (including collar) COLLAR: Smooth, highly polished, 2.0 mm EXTERNAL HEX: 2.70 mm flat-to-flat, 0.7 mm height ROUGH SURFACE: By Double Acid Etching & Sand Blasting Delivery: Sterile Surgical Set including Implant, Implant Mount and Cover Screw
DIAMETER
LENGHT
CATALOG #
3.75 mm
8 mm. 10 mm. 11.5 mm. 13 mm. 15 mm.
IF 3008M IF 3010M IF 3011M IF 3013M IF 3015M
4.00 mm
8 mm. 10 mm. 11.5 mm. 13 mm. 15 mm.
IF 4008M IF 4010M IF 4011M IF 4013M IF 4015M
All other measures are replaced by the 5.00 mm HEXIMPLANTS in the Evolution product line. (see page 2)
Cover Screw Catalog # HCS Tornillo de obturaci贸n temporaria.
eFeDeA Implants
1
JJG Evolution Implant System
Products Catalog
JJG EVOLUTION IMPLANT SYSTEM (Made in USA)
JJG EVOLUTION HEXIMPLANT 3.75, 4.00 y 5.00 mm COMPATIBLE Characteristics: Titanium-5th grade. Auto-Advancing & Self-Tapping Implant. Recommended for immediate loading, early or conventional procedures. DIAMETER: 3.75 mm LENGHTS: 10, 11.5, 13 mm (including collar) COLLAR: Smooth, highly polished. 2 mm height. EXTERNAL HEX: 2.70 mm flat-to-flat, 0.7 mm height (4.1 mm platform) ROUGH SURFACE: By Double Acid Etching & Sand Blasting Delivery: Sterile Surgical Set including Implant, Implant Mount and Cover Screw.
DIAMETER
LENGHT
CATALOG #
3.75 mm
10 mm. 11.5 mm. 13 mm. 15 mm.
EH3010M EH3011M EH3013M EH3015M
4.00 mm
8 mm. 10 mm. 11.5 mm. 13 mm. 15 mm.
EH4008M EH4010M EH4011M EH4013M EH4015M
5.00 mm
8 mm. 10 mm. 11.5 mm. 13 mm. 15 mm.
EH5008M EH5010M EH5011M EH5013M EH5015M
Drill no more than 3/4 the length of the implant. Instrumental necesario para su colocaci贸n: Catalog # EIDL30 Twist Drill, 3.0 mm diameter. For EH 3.75 mm diameter implants. Catalog # EIDL33 (optional) Twist Drill, 3.3 mm diameter. For EH 3.75 mm diameter implants. Catalog # EIDL35 (optional) Twist Drill, 3.5 mm diameter. For EH 4.00 mm diameter implants.
2
JJG Evolution Implant System
JJG Evolution Implant System
Catalog # EIDL40 Twist Drill, 4.0 mm diameter. For EH 5.00 mm diameter implants. Catalog # EIDL43 (optional) Twist Drill, 4.3 mm diameter. For EH 5.00 mm diameter implants. Catalog # THD48 Torque Hex Driver 0.048” Catalog # OEW Open End Wrench. Catalog # RW (optional) Ratchet Wrench. Catalog # ADL (optional) Digital Wrench Adapter.
JJG EVOLUTION SWISS IMPLANT 4.00 mm COMPATIBLE Characteristics: Titanium-5th grade. Auto-Advancing & Self-Tapping Implant. 8º Morse cone with Implant Mount/UCLA Ti. DIAMETER: 4.00 mm CUP DIAMETER: 4.80 mm LENGHTS: 10, 11.5, 13 & 15 mm (including collar) COLLAR: Smooth, highly polished. 2 mm height. With microspires in its lower part. MORSE CONE: Compatible ROUGH SURFACE: By Double Acid Etching & Sand Blasting Delivery: Sterile Surgical Set including Implant, Implant Mount/UCLA Ti with or without Cover Screw.
DIAMETER
LENGHT
CATALOG #
4.00 mm
10 mm. 11.5 mm. 13 mm. 15 mm.
ES4010M ES4011M ES4013M ES4015M
Drill no more than 3/4 the length of the implant. JJG Evolution Swiss Implant System Instrumentation: Catalog # EIDL33 Twist Drill, 3.3 mm diameter. For ES 4.00 mm diameter implants. Catalog # EIDL35 (optional) Twist Drill, 3.5 mm diameter. For ES 4.00 mm diameter implants. Catalog # THD48 Torque Hex Driver 0.048”. Catalog # OEW Open End Wrench. Catalog # RW (optional) Ratchet Wrench. Catalog # ADL (optional) Digital Wrench Adapter. Catalog # ESCS Titanium Cover Screw. JJG Evolution Implant System
3
JJG Evolution Implant System
Products Catalog
JJG EVOLUTION JJG EVOLUTION MONOBLOCK 3.00 & 3.75 Characteristics: Titanium-5th grade. Auto-Advancing & Self-Tapping Implant. One-Piece Implant/Abutment-Post. Recommended for immediate loading procedures. DIAMETER: 3.00 & 3.75 mm LENGHTS: 10, 11.5, 13 & 15 mm (including collar) COLLAR: Smooth, highly polished. 2 mm height. ABUTMENT HEIGHT: 7 mm Non-Rotating Shouldered Abutment. ROUGH SURFACE: By Double Acid Etching & Sand Blasting Delivery: Eli Implant Sterile Surgical Set.
DIAMETER
LENGHT
CATALOG #
3.00 mm
10 mm. 11.5 mm. 13 mm. 15 mm.
MB3010N MB3011N MB3013N MB3015N
3.75 mm
10 mm. 11.5 mm. 13 mm. 15 mm.
MB3010 MB3011 MB3013 MB3015
Drill no more than 3/4 the length of the implant. Catalog # CG300 Plastic gingiva former. Monoblock 3.00 mm. Catalog # AM300 Plastic abutment analog. Monoblock 3.00 mm. Catalog # CG375 Plastic gingiva former. Monoblock 3.75 mm. Catalog # AM375 Plastic abutment analog. Monoblock 3.75 mm. JJG Evolution Monoblock Implant System Instrumentation: Catalog # EIDL20 Twist Drill, 2.0 mm diameter for 3.00 mm. Catalog # EIDL25 (optional) Twist Drill, 2.5 mm diameter for 3.00 mm. Catalog # ENT Evolution Monoblock Wrench 3.00 mm. Catalog # EIDL25 Twist Drill, 2.5 mm diameter for 3.75 mm. Catalog # EIDL28 (optional) Twist Drill, 2.8 mm diameter for 3.75 mm. Catalog # EMT Evolution Monoblock Wrench 3.75 mm. Catalog # OEW Open End Wrench. Catalog # RW (optional) Ratchet Wrench. Catalog # ADL (optional) Digital Wrench Adapter. 4
JJG Evolution Implant System
JJG Evolution Implant System
JJG EVOLUTION JJG EVOLUTION BALL 2.20 Characteristics: Titanium-5th grade. Auto-Advancing & Self-Tapping Implant with Ball Attach. Recommended for immediate loading procedures. DIAMETER: 2,20 mm LENGHTS: 10, 11.5, 13 & 15 mm (including collar) COLLAR: Smooth, highly polished. 2 mm height ROUGH SURFACE: By Double Acid Etching & Sand Blasting Delivery: Eli Implant Sterile Surgical Set, Including metal housing with O’ring.
DIAMETER
LENGHT
CATALOG #
2.20 mm
10 mm. 11.5 mm. 13 mm. 15 mm.
EB2210 EB2211 EB2213 EB2215
Drill no more than 3/4 the length of the implant. Catalog # MH02A Metal housing with high retention O’ring. Catalog # MH02M Metal housing with medium retention O’ring. JJG Evolution Monoblock Ball Implant System Instrumentation: Catalog # EIDL16 Twist Drill, 1.6 mm diameter. Catalog # EIDL20 (optional) Twist Drill, 2.0 mm diameter. Catalog # EBT Evolution Ball Wrench, 2.2 mm. Catalog # OEW Open End Wrench. Catalog # RW (optional) Ratchet Wrench. Catalog # ADL (optional) Digital Wrench Adapter.
JJG EVOLUTION JJG EVOLUTION ORTHODONTIC 1.60 mm Characteristics: Titanium-5th grade. Auto-Advancing & Self-Tapping Implant. For orthodontic treatment. DIAMETER: 1.60 mm LENGHTS: 6, 8 & 10 mm SURFACE: Not processed / Delivery: Eli Implant Sterile Surgical Set
DIAMETER
LENGHT
CATALOG #
1.60 mm
6 mm. 8 mm. 10 mm.
EORT1606 EORT1608 EORT1610
JJG Evolution Orthodontic Implant System Instrumentation: Catalog # EBT/ORT Evolution BALL/ORT Wrench, 2.2 and 1.60 mm. Catalog # EIDL10 Twist Drill, 1.0 mm diameter. Catalog # ADL (optional) Digital Wrench Adapter. JJG Evolution Implant System
5
Surgical & Prosthetic Instrumentation
Products Catalog
SURGICAL & PROSTHETIC INSTRUMENTATION Catalog # FL Locator Drill. Catalog # FP Pilot Drill, 2.0 to 3.0 mm.
Twist Drill (External Irrigation System) Catalog # EIDL16 Twist Drill 1.6 mm. Catalog # EIDL20 Twist Drill 2.0 mm. Catalog # EIDL25 Twist Drill 2.5 mm. Catalog # EIDL28 Twist Drill 2.8 mm. Catalog # EIDL30 Twist Drill 3.0 mm. Catalog # EIDL33 Twist Drill 3.3 mm. Catalog # EIDL35 Twist Drill 3.5 mm. Catalog # EIDL40 Twist Drill 4.0 mm. Catalog # EIDL43 Twist Drill 4.3 mm.
Spade Drill (Internal Irrigation System) Catalog # IIDL20 Spade Drill 2.0 mm. Catalog # IIDL25 Spade Drill 2.5 mm. Catalog # IIDL30 Spade Drill 3.0 mm. Catalog # IIDL32 Spade Drill 3.2 mm. Catalog # IIDL34 Spade Drill 3.4 mm.
6
Surgical & Prosthetic Instrumentation
Surgical & Prosthetic Instrumentation
Bone Taps for Ratchet Wrench Catalog # BTL3 Latch Type Bone Tap Long 3.75 mm. Catalog # BTL4 Latch Type Bone Tap Long 4.0 mm.
Bone Taps for Mount Drivers Catalog # HBTS3 Latch Type Bone Tap Short 3.75 mm. Catalog # HBTS4 Latch Type Bone Tap Short 4.0 mm. Catalog # HBTL3 Latch Type Bone Tap Long 3.75 mm. Catalog # HBTL4 Latch Type Bone Tap Long 4.0 mm.
Countersink Drills Catalog # CSDL Countersink Drill Long 3.75 / 4.00 mm. Catalog # CSDS3 Countersink Drill Short 3.75 / 4.00 mm.
Screwdrivers Catalog # WSDL Wide Slotted Driver. Catalog # HHD38 Latch Type Driver 0,038” mechanical. Catalog # HSD Latch Type Slotted Driver. Catalog # HHD48 Latch Type Driver 0,048” mechanical. Catalog # HD50 Screwdriver 0,050”.
Implant Mount Drivers for 4x4 mm square. Catalog # IMDS Latch Mount Driver Short. Catalog # IMDL Latch Mount Driver Long.
Surgical & Prosthetic Instrumentation
7
Surgical & Prosthetic Instrumentation
Products Catalog
Drill Extender Catalog # DE Drill Extender.
Paralleling Pins Catalog # DI-2 Paralleling Pins (2 unit pack).
Open End Wrench for 4x4 mm square. Catalog # OEW Open End Wrench.
Ratchet Wrench for 4x4 mm square. Catalog # RW Ratchet Wrench. Catalog # RE Ratchet Extension.
Implant Depth Gauge Catalog # IDG Implant Depth Gauge.
Digital Wrench Adapter for 4x4 mm square. Catalog # ADL (optional) Digital Wrench Adapter.
Implant Mount Catalog # IM Implant Mount.
Torque Wrench System Catalog # TW10 Torque Wrench 10 Ncm. Catalog # TW20 Torque Wrench 20 Ncm. Catalog # TW30 Torque Wrench 30 Ncm.
8
Surgical & Prosthetic Instrumentation
Surgical & Prosthetic Instrumentation
Screwdrivers Catalog # THD48 Torque Hex Driver 0.048� (For Ratchet Wrench & Open End Wrench). Catalog # THD50 Torque Hex Driver 0.050�. Catalog # SQDL Square Driver. Catalog # THDL Slotted Driver.
Autoclavable Surgical Organizer Tray Catalog # INORG Autoclavable Surgical Organizer Tray. Measures 190 x 90 x 33 mm. Capacity for 20 elements plus long instruments.
Osteotomes Catalog # OSTEO
2 Handles: Straight for the Front Section Angled for the Rear Section 15 Interchangeable Aspirator Tips For Bone Compression (convex): 2 to 4 mm; 2.5 to 3 mm; 3 to 3.5 mm; 3.5 to 4 mm, and 4.5 to 5 mm. For Sinus Floor Elevation (concave): 1.5 to 3 mm; 2 to 3 mm; 2.5 to 4 mm, and 3 to 4 mm. For Implants: 1.8 mm; 2 mm; 3 mm; 4 mm; 2 to 2.5 mm, and 3 to 4 mm.
Trephine. Catalog # TREF Trephine.
Abutment Forceps. Catalog # PPM Abutment Forceps.
Castro Viejo needle holder forceps. Catalog # PACV Castro Viejo needle holder forceps.
Castro Viejo surgery scissors. Catalog # TCCV Castro Viejo surgery scissors.
Surgical & Prosthetic Instrumentation
9
Surgical & Prosthetic Instrumentation
Products Catalog
Molt Periosteal Elevator. Catalog # VPM Molt Periosteal Elevator. Catalog # VPB Buser Periosteal Elevator.
Lucas Curette Catalog # VCL Lucas Curette
Large Surgical Chisels. Catalog # VCQG Large Surgical Chisels. Catalog # VCQM Medium Surgical Chisels.
Osteotomes for expansion. Angled or Straight Catalog # VOEX Osteotomes for expansion. Angled or Straight (Measures 2.1, 2.75, 3.25, 3.75)
Osteotomes for sinus floor elevation Catalog # VOLS Osteotomes for sinus floor elevation (Sammer Technique). Angled or Straight (Measures 2.75, 3.25, 3.75) Catalog # VEXP Bone Expanders. Stoma-like Breaker (Measures 2.8, 3.5, 4.2)
Bone Carrier. Catalog # VIPH Bone Carrier. Catalog # VCAM Metal Suction Tip. Catalog # VCAL Caliper (Imported) Catalog # VBE2 20 element Perforated Sterilization Tray. Catalog # VBE1 10 element Perforated Sterilization Tray.
10 Surgical & Prosthetic Instrumentation
Prosthetic Abutments
PROSTHETIC ABUTMENTS Threaded-threaded Prosthetic System • 2 degrees Abutment Subgingival Height: 1, 2, 3, 4, 5, 7 mm. Emergence Profile. Shoulder Diameter: 5.2 mm. / Prosthetic Shoulder: 0.5 mm. Catalog # SA21 2º Titanium Shouldered Abutment 1 mm. Catalog # SA22 2º Titanium Shouldered Abutment 2 mm. Catalog # SA23 2º Titanium Shouldered Abutment 3 mm. Catalog # SA24 2º Titanium Shouldered Abutment 4 mm. Catalog # SA25 2º Titanium Shouldered Abutment 5 mm. Catalog # SA27 2º Titanium Shouldered Abutment 7 mm.
For Screwed Prostheses • 2º Non-Rotating Shouldered Abutment Subgingival Height: 1, 2, 3, 4, 5, 7 mm. Emergence Profile. Shoulder Diameter: 5.2 mm. / Prosthetic Shoulder: 0.5 mm. Catalog # SA21N 2º Titanium Non-Rotating Shouldered Abutment 1 mm. Catalog # SA22N 2º Titanium Non-Rotating Shouldered Abutment 2 mm. Catalog # SA23N 2º Titanium Non-Rotating Shouldered Abutment 3 mm. Catalog # SA24N 2º Titanium Non-Rotating Shouldered Abutment 4 mm. Catalog # SA25N 2º Titanium Non-Rotating Shouldered Abutment 5 mm. Catalog # SA27N 2º Titanium Non-Rotating Shouldered Abutment 7 mm.
For Screwed Prostheses • 15º Shouldered Abutment. Allows up to 30º of deviation between Implants Subgingival Height: 3, 4, 5, 7 mm. Emergence Profile. Shoulder Diameter: 5.2 mm. / Prosthetic Shoulder: 0.5 mm. Catalog # SA153 15º Titanium Shouldered Abutment 3 mm. Catalog # SA154 15º Titanium Shouldered Abutment 4 mm.
Prosthetic Abutments 11
Prosthetic Abutments
Products Catalog
Catalog # SA155 15º Titanium Shouldered Abutment 5 mm. Catalog # SA157 15º Titanium Shouldered Abutment 7 mm.
Prosthetic Screw Catalog # PSH Prosthetic Screw.
Healing Caps
Prosthetic Abutments
Catalog # SAHC2 2º Plastic Healing Cap. Catalog # SAHC15 15º Plastic Healing Cap.
Cemented Prosthesis
One Piece (non-hexed) for multiple unit prosthetics only. Attaches directly to the implant. Catalog # TTA7 Titanium Tapered Abutment 7 mm. Catalog # TTA10 Titanium Tapered Abutment 10 mm.
Cemented Prosthesis
Hexed with fastening screw. For cemented prosthetics - Attaches directly to the implant. Two Piece (hexed base) allows single tooth restoration. Catalog # TTR1 Titanium Tapered Abutment 7 mm, Hexed, with Fastening Screw. Subgingival height: 1 mm. Catalog # TTR1CH Titanium Tapered Abutment 7 mm, Shouldered and Hexed, with Fastening Screw. Subgingival height: 1 mm. Catalog # TTR2 Titanium Tapered Abutment 7 mm, Hexed, with Fastening Screw. Subgingival height: 2 mm. Catalog # TTR2CH Titanium Tapered Abutment 7 mm, Shouldered and Hexed, with Fastening Screw. Subgingival height: 2 mm. Catalog #TP Fastening Screw.
15º & 25º Pre-Angled Abutments Catalog # PA15 15º Pre-Angled Abutment with fastening screw.
12 Prosthetic Abutments
Prosthetic Abutments
Catalog # PA25 25º Pre-Angled Abutment with fastening screw. Catalog # TP Fastening Screw.
Castable UCLA Abutment UCLA with screw
Catalog # UCLA Castable Abutment, with fastening screw. Catalog # UCLA N/H Castable Abutment, Non-Hexed, with Fastening Screw. Catalog # TP Fastening Screw.
Healing Abutments
Emergence Profile - Diameter: 5.20 mm. / Heights: 3.0 & 6.0 mm. Catalog # HHA2 Titanium Healing Abutment 2 mm. Catalog # HHA3 Titanium Healing Abutment 3 mm. Catalog # HHA5 Titanium Healing Abutment 5 mm.
OVERDENTURE ABUTMENTS Ball Attach System for Implants (Including metal housing with O’ring, extra O’ring) Catalog # OR1.5 Ball Attach System. Subgingival height: 1.5 mm. Catalog # OR2 Ball Attach System. Subgingival height: 2 mm. Catalog # OR3 Ball Attach System. Subgingival height: 3 mm.
Ball Attach System for Roots (Including metal housing with O’ring, extra O’ring and Analog) Catalog # AIT Ball Attach System for Natural Root.
Prosthetic Abutments / Overdenture Abutments 13
Overdenture Abutments
Catalog # HHA6 Titanium Healing Abutment 6 mm.
Imanes
Products Catalog
MAGNETS Catalog # IM 5111 Magnet 5.5 mm diameter x 3.0 mm thick, capacity: 500 g. Catalog # IM 5112 Magnet 5.0 mm diameter x 3.0 mm thick, capacity: 400 g.
Complementos de Laboratorio
Catalog # IM 5113 Magnet 5.0 mm diameter x 1.6 mm thick, capacity: 300 g.
LABORATORY COMPONENTS For Screwed Prostheses Catalog # TCY2N 2º Non-Rotating Shouldered Abutment Plastic Transfer Coping-Cylindrical. Catalog # TCY2 2º Shouldered Abutment Plastic Transfer Coping-Cylindrical. Catalog # TCY15 15º Shouldered Abutment Plastic Transfer Coping-Cylindrical. Catalog # TCO2N 2º Non-Rotating Shouldered Abutment Plastic Transfer Coping-Conical. Catalog # TCO2 2º Shouldered Abutment Plastic Transfer Coping-Conical. Catalog # TCO15 15º Shouldered Abutment Plastic Transfer Coping-Conical.
Lab Screw for Waxing Up Catalog # TG13 Transfer Guide 13 mm. Catalog # TG18 Transfer Guide 18 mm.
Laboratory Analogs Catalog # SAA2N 2º Non-Rotating Shouldered Abutment Analog. Catalog # SAA2 2º Shouldered Abutment Analog. Catalog # SAA15 15º Shouldered Abutment Analog. Catalog # HIA Hex Implant Analog. 14 Laboratory Components
Autogenous Bone Collection Device (FDA Clearence) Catalog # ABC Autogenous Bone Collection Device. Delivery: Sterile, Disposable, Single Use Only. Catalog # SOV Vacuum Autoclavable Aspirator Tips. Delivery: 10 Non-Sterile Aspirator Tips.
Tissue Regeneration System
TISSUE REGENERATION SYSTEM
Resorbable Membranes Catalog # MECE Resorbable Membrane, Collagen, 30 x 30 mm. Catalog # MECE-M Resorbable Membrane, Collagen and Metronizadole, 15 x 30 mm. Catalog # MECE-C Resorbable Membrane, Collagen and Chlorhexidine Digluconate, 15 x 30 mm.
Non-Resorbable Membrane
BONE GRAFTING MATERIAL Catalog # RECH Fibrous Collagen Bone Grafting Material, 400 mg (2 Pack, 200 mg each). Catalog # HL1 (E) Freeze-dried Bone, 0.2 to 1 mm x 1.0 cm3. Catalog # HL1 (CED) Freeze-dried Bone 0.2 to 1 mm x 1.0 cm3. Catalog # FOSF-3 Tricalcium Phosphate 500 mg. Made in Japan (0.3 to 0.6 mm). Catalog # FOSF-6 Tricalcium Phosphate 500 mg. Made in Japan (0.6 to 1.0 mm). Catalog # TABL Freeze-dried Cortical-spongy Splint, approx. mize 10 x 20 x 3 mm.
Tissue Regeneration System / Bone Grafting Material 15
Bone Grafting Material
Catalog # 3425TI Non-Resorbable Titanium Membrane, 34 x 25 mm. Made in USA.
Sutures
Products Catalog
SUTURES SUTURFIX sutures properties: Sterilized by Gamma Radiation. In compliance with the US Pharmacopoeia (USP) Uniform-diameter Sutures. AVAILABLE SUTURES: NYLON MONOFILAMENT • BLACK SILK BRAIDED (75 cm long) SHAPES:
EYELESS ATRAUMATIC NEEDLES: Round Bodied
Reverse Cutting
SUTURES SIZES: (U.S.P.) Metric
5-0 1.5
4-0 2
3-0 3
NEEDLE LENGHTS: 16 mm. 20mm.
SUTURFIX BLACK SILK BRAIDED • 12 Pack. STERILE ATRAUMATIC SUTURE NON-REABSORBABLE U.S.P. Sterilized by Gamma Radiation NEEDLE LENGHTS: 16 & 20 mm NEEDLES: 1/2 circle & 3/8 circle. Round Bodied and Reverse Cutting USP: 3-0 & 4-0 Catalog # SK301612T Black Silk Suture, size 3-0, 16 mm, 1/2 circle, Reverse Cutting. Catalog # SK301638T Black Silk Suture, size 3-0, 16 mm, 3/8 circle, Reverse Cutting. Catalog # SK302012R Black Silk Suture, size 3-0, 20 mm, 1/2 circle, Round Bodied. Catalog # SK302012T Black Silk Suture, size 3-0, 20 mm, 1/2 circle, Reverse Cutting. Catalog # SK302038T Black Silk Suture, size 3-0, 20 mm, 3/8 circle, Reverse Cutting. Catalog # SK401612T Black Silk Suture, size 4-0, 16 mm, 1/2 circle, Reverse Cutting. Catalog # SK401638T Black Silk Suture, size 4-0, 16 mm, 3/8 circle, Reverse Cutting. Catalog # SK402012R Black Silk Suture, size 4-0, 20 mm, 1/2 circle, Round Bodied. Catalog # SK402012T Black Silk Suture, size 4-0, 20 mm, 1/2 circle, Reverse Cutting. Catalog # SK402038T Black Silk Suture, size 4-0, 20 mm, 3/8 circle, Reverse Cutting. 16 Sutures
Sutures
SUTURFIX Nylon Monofilament • 12 Pack STERILE ATRAUMATIC SUTURE NON-REABSORBABLE U.S.P. Sterilized by Gamma Radiation NEEDLE LENGHTS: 16 mm NEEDLES: 1/2 circle - Reverse Cutting USP: 5-0 Catalog # NY501612T Nylon Monofilament, size 5-0, 16 mm, 1/2 circle, Reverse Cutting. Catalog # NY501638T Nylon Monofilament, size 5-0, 16 mm, 3/8 circle, Reverse Cutting.
PRE-THREADED EYED NEEDLES • BLACK SILK BRAIDED • STERILE • 10 Pack (BY REQUEST) Catalog # S301612R Suture 3.0, 16 mm, 1/2 circle, Round Bodied. Catalog # S301612T Suture 3.0, 16 mm, 1/2 circle, Reverse Cutting. Catalog # S302012R Suture 3.0, 20 mm, 1/2 circle, Round Bodied. Catalog # S302012T Suture 3.0, 20 mm, 1/2 circle, Reverse Cutting.
EYED NEEDLES • NON-STERILE • 10 Pack (BY REQUEST) Catalog # AG1612T Needle, 16 mm, 1/2 circle, Reverse Cutting. Catalog # AG1612R Needle, 16 mm, 1/2 circle, Round Bodied. Catalog # AG2012T Needle, 20 mm, 1/2 circle, Reverse Cutting. Catalog # AG2012R Needle, 20 mm, 1/2 circle, Round Bodied.
Sutures 17
Other Products
Products Catalog
OTHER PRODUCTS CONTRA-ANGLE Catalog # CA1:1R Contra-Angle 1:1, roller bearing disassemblable handpiece. Catalog # CA1:1B Contra-Angle 1:1, bushing disassemblable handpiece. Catalog # CA16:1 Contra-Angle 16:1, roller bearing disassemblable handpiece.
MICROMOTOR Catalog # BR3000 Micromotor with physio dispenser. 400 to 24,000 rpm. Automatic Torque Control. Digital Display. forward/reverse switch. Lighting & Audible signals. Can be used with reducing contra-angles. Catalog # BR3000R Micromotor with physio dispenser & reductor. 400 to 24,000 rpm. Automatic Torque Control. Digital Display. Forward/Reverse switch. Lighting & Audio signals. Can be used with 1:1 contra-angles.
CĂ MARA INTRAORAL Catalog # CAM Intraoral camera, RCA connection to TV.
18 Other Products