Supervac Intelligent Vacuum Packaging

®

intelligent vacuum packaging

GK 90 / GK 126 Supervac GK 90 / GK 126 Table Top – Vacuum Packaging Machine All stainless steel construction.

Reliable.

Transparent lid.

Easy to service.

Digital control.

Hygienic design – easy to clean.

Built-in vacuum pump with motor protection.

Easy to operate.

GK 90 / GK 126 Reliability in a compact form.

Vacuum packaging for food such as meat and meat products, sausages, cheese, fish, etc. – no weight loss, longer shelf life!

GK 90

GK 126

Standard Features:

Standard Features:

1 programme.

10 programmes.

Single sealing.

Parallel sealing or Single sealing + Hot wire cut-off.

8 m3/h pump.

Vacuum sensor with steam point detection.

Optional Features for GK 126: Gas flushing.

21 m3/h pump.

Additional sealing bar (rear).

16 m3/h pump.

Technical data

GK 90 GK 126 Outside dimensions (L x W x H) ..................................................................... 370 x 500 x 300 mm 530 x 590 x 460 mm Chamber dimensions (L x W x H) .................................................................. 270 x 310 x 100 mm 420 x 370 x 180 mm Sealing bar length................................................................................................. 270 mm 420 mm Max. product length............................................................................................. 310 mm 370 mm Max. product height............................................................................................. 100 mm 180 mm Built-in Busch vacuum pump........................................................................... 8 m3/h 16 / 21 m3/h Electricity consumption .................................................................................... 0,75 kW 1,15 kW / 1,55 kW Weight approx. ....................................................................................................... 25 kg 60 kg Power supply............................................................................................................ 230V, 1Ph, 50/60Hz 230V, 1Ph, 50/60Hz

110V, 1Ph, 60Hz 110V, 1Ph, 60Hz

370

530

Subject to change without notice.

®

Supervac Maschinenbau GmbH | Jochen-Rindt-Strasse 3 | 1230 Wien | Austria | t: +43 1 616 28 80 | f: +43 1 616 28 84 | e: office@supervac.at | www.supervac.at

02/2016 | Supervac is a registered trademark of Supervac Maschinenbau GmbH. Copyright © 2016 Supervac Maschinenbau GmbH. All rights reserved.

370

340

500

460

GK 126

590

GK 90

ÂŽ

intelligent vacuum packaging

GK 160/191/193 Supervac GK 160 / GK 191 / GK 193 Single Chamber Vacuum Packaging Machines

Digital control with 10 programmes.

Waterproof to IP65.

Vacuum sensor with steam point detection.

All stainless steel construction.

Built-in vacuum pump with motor protection.

On lockable casters.

Reliable and easy to service.

GK 160: Transparent lid.

Hygienic design – easy to clean.

GK 191 / GK 193: Stainless steel lid.

Easy to operate.

GK 160 / GK 191 / GK 193 Compact and Reliable.

Standard Features: Parallel sealing or Single sealing + Hot wire cut-off.

10 programmes.

Vacuum sensor with steam point detection.

Optional Features: The Biactive Sealing guarantees safe and reliable seals despite wrinkles, grease and moisture in the seal area.

Gas flushing.

Individual control of Hot wire cut-off (GK 191 / GK 193 only).

Biactive Sealing (GK 191 / GK 193 only).

Technical data

GK 160 Outside dimensions (L x W x H)................................ 735 x 815 x 1020 mm Chamber dimensions (L x W x H)............................. 500 x 520 x 220 mm Sealing bar length front + rear............................... X Sealing bar length left + right.................................. 2 x 520 mm Sealing bar length front + right.............................. X Distance between seal bars front + rear.......... X Distance between seal bars left + right ........... 500 mm Max. product length front + right ......................... X Max. product height ...................................................... 220 mm Built-in Busch vacuum pump ................................... 40 / 63 m3/h Electricity consumption .............................................. 1.9 / 2.3 kW Weight approx. ................................................................. 180 kg Power supply...................................................................... 230V, 3Ph, 50Hz

400V, 3Ph, 50Hz

GK 160

GK 191 935 x 1000 x 1140 mm 805 x 605 x 210 mm 2 x 820 mm 2 x 620 mm 780 x 520 mm 540 mm 745 mm 805 mm 210 mm 100 / 160 m3/h 3.8 / 5.6 kW 260 kg 230V, 3Ph, 50Hz 400V, 3Ph, 50Hz

GK 191

GK 193

935

1118

1235

Subject to change without notice.

1135

1135

786

917

103

1180

ÂŽ

Supervac Maschinenbau GmbH | Jochen-Rindt-Strasse 3 | 1230 Wien | Austria | t: +43 1 616 28 80 | f: +43 1 616 28 84 | e: office@supervac.at | www.supervac.at

02/2016 | Supervac is a registered trademark of Supervac Maschinenbau GmbH. Copyright Š 2016 Supervac Maschinenbau GmbH. All rights reserved.

725

855

730

865

700

815

,

730

GK 193 1135 x 1000 x 1140 mm 1050 x 605 x 210 mm 2 x 1020 mm 2 x 620 mm 980 x 520 mm 540 mm 945 mm 1005 mm 210 mm 160 / 300 m3/h 5.6 / 9.1 kW 280 kg 230V, 3Ph, 50Hz 400V, 3Ph, 50Hz

ÂŽ

intelligent vacuum packaging

GK 255/291/293 Supervac GK 255 / GK 291 / GK 293 Double Chamber Vacuum Packaging Machines

Waterproof to IP 65.

Vacuum sensor with steam point detection.

Built-in vacuum pump with motor protection.

All stainless steel construction.

Reliable and easy to service.

On lockable casters.

Hygienic design – easy to clean.

Digital control with 10 programmes.

Easy to operate.

GK 255 / GK 291 / GK 293 Vacuum packaging for food such as meat and meat products, sausages, cheese, fish, etc.

– no weight loss, longer shelf life!

Standard Features: Parallel sealing or Single sealing + Hot wire cut-off.

10 programmes.

The Biactive Sealing guarantees safe and reliable seals despite wrinkles, grease and moisture in the seal area.

Vacuum sensor with steam point detection.

Optional Features: Gas flushing.

Individual control of Hot wire cut-off.

Biactive Sealing.

Technical Data

GK 255 Outside dimensions (L x W x H)................................ 1140 x 920 x 1205 mm Chamber dimensions (L x W x H)............................. 620 x 520 x 230 mm Sealing bar length front + rear............................... 4 x 620 mm Distance between seal bars front + rear ........ 520 mm Max. product height....................................................... 230 mm Built-in Busch vacuum pump..................................... 63 / 100 / 160 m3/h Electricity consumption................................................ 2.3 / 3.8 / 5.6 kW Weight approx. ................................................................. 350 kg Power supply...................................................................... 230V, 3Ph, 50 Hz

400V, 3Ph, 50Hz

GK 291

GK 293

55

®

Supervac Maschinenbau GmbH | Jochen-Rindt-Strasse 3 | 1230 Wien | Austria | t: +43 1 616 28 80 | f: +43 1 616 28 84 | e: office@supervac.at | www.supervac.at

02/2016 | Supervac is a registered trademark of Supervac Maschinenbau GmbH. Copyright © 2016 Supervac Maschinenbau GmbH. All rights reserved.

970

899

1265

910 899 967

1162

899 967

1205

900

1093

1440

1992

1803

1185

61

GK 293 2050 x 1275 x 1245 mm 920 x 870 x 270 mm 4 x 920 mm 870 mm 270 mm 160 / 300 m3/h 5.6 / 9.1 kW 720 kg 230V, 3Ph, 50Hz 400V, 3Ph, 50Hz

Subject to change without notice.

GK 255

GK 291 1865 x 1100 x 1230 mm 820 x 700 x 250 mm 4 x 820 mm 700 mm 250 mm 160 / 300 m3/h 5.6 / 9.1 kW 600 kg 230V, 3Ph, 50Hz 400V, 3Ph, 50Hz

®

intelligent vacuum packaging

Supervac GK 195B Fully Automatic Chamber Machine All stainless steel construction.

Single chamber machine with powered discharge conveyor in the chamber and automatic lid drive with safety frame for fully automatic operation – single cycles can be activated manually.

Automatic discharge of the products by a powered discharge conveyor with infinitely variable height adjustment (0-70mm) – removable for fast and easy cleaning.

GK 195B High Pressure Biactive Sealing for tough and reliable seals despite wrinkles, moisture and grease in the seal area.

Expansion Cushion with Snap-out Frame reduces evacuation time by up to 30% and prevents wrinkles on the upper side of the package.

Easy to maintain.

Hygienic design – easy to clean.

GK 195B The Compact and Adaptable Packaging Solution

Model GK 195B/2R 1 front and 1 side sealing bar

530

515

Standard Features: High Pressure Biactive Sealing with Spring loaded Resistance Wires.

DIGIMAT 5, Microprocessor control unit (20 programmes).

Automatically operated outfeed rollers, 130mm.

1000

Expansion Cushion with Snap-out Frame.

Model GK 195B/2 2 sealing bars, 1 front, 1 rear

Optional Features: Cut-off perforation knives or straight cut-off knives, to remove overlength of bag material parallel to the seal. Unlike hot-wire cut-off these are suitable for shrink bags, laminate bags and aluminium foil bags, and are extremely durable.

490

530

1000

Watercooled Sealing Bars.

Gas Flushing: large diameter pipes ensure fast flushing. 6 nozzles on the front/rear bars, 3 nozzles on the side bar.

1000

Recommended Vacuum Pump: 250m³/h with integral exhaust.

Model GK 195B/3R - 3 sealing bars 1 front, 1 rear and 1 side sealing bar 1000

Technical Data:

C

Water inlet

R 1/4“ - 9 mm

D

Water drain

R 1/4“ - 9 mm

K

Gas connection

R 1/4“ - 9 mm

K C D

K

B A

C

B

D

A

1200 (~47) ~1350 (~53)

~60 (~2.5)

830 (~32.5)

Supervac Ges.m.b.H. | Jochen Rindt Straße 3 | A-1230 Wien | Austria | t: +43 (0) 1 616 28 80 | f: +43 (0) 1 616 28 84 | e: office@supervac.at | www.supervac.at

Copyright © 2012 Supervac Ges.m.b.H. All rights reserved.

03/2013 | Supervac is a registered trademark of Supervac Ges.m.b.H.

R 1/4“ - 9 mm

Subject to change without notice.

Compressed air

approx. 770 lbs

~1570 (~62)

B

53“ x 36“ x 62“ 46“ x 26“ x max. 9“ 7“ 9“

840 (~33)

Mains connection

~770 (~30)

A

1350 x 920 x 1570 mm 1160 x 660 x max. 230 mm 180 mm 230 mm 250 m³/h 3.2 kW 30 Nl / min. 6 bar approx. 350 kg

1125 (~44)

1000

100 (~4) +/- 30 (~1)

530

480

Outside dimensions Chamber size Max. product height with conveyor without conveyor Recommended vacuum pump Electricity consumption (without pump) Compressed air consumption Total weight without pump

速

intelligent vacuum packaging

GK 169B/170B

Supervac GK 169B/170B

seal bar cut-off perforation pouch piercing knives

High Pressure Double Biactive Sealing and Spring Loaded Resistance Wires are standard. Tough and reliable seals despite wrinkles, moisture and grease in the seal area.

Springs keep the resistance wires taut during continuous production, increasing the working life of resistance wires and teflon.

Pouch Piercing Knives (optional) pierce evacuation slots into overlength bags which protrude from the chamber so that the closing lid cannot obstruct evacuation.

Cut-off Perforation Knives (optional) leave the operator to simply remove surplus material from the pack after the vacuum packing has been completed.

Watercooled Seal Bars (optional) are recommended if the machine runs at 3 cycles/minute continuously or heat sensitive shrink bags are used. The water cooling stabilises the temperature of the seal bars.

The conveyorised stainless steel vacuum packaging machine with increased output from only one operator.

For meat, fish, cheese and all other food and non-food products.

GK 169B: max. product height 180 mm GK 170B: max. product height 300 mm

Touch Screen Control Unit

Made of high quality stainless steel for ease of cleaning and maximum hygiene.

Simple touch control on screen.

Precision programming of machine functions.

Continuous display of cycle status in menus.

20 programmes in memory.

Alpha-numeric display for e.g. product name or bag material etc.

Integral digital vacuum meter.

Index value in mbar.

Evacuation mode : optimum possible for product. evacuation by time, 0.1 second intervals. desired final vacuum in mbar. interval evacuation.

Sealing time by 0.1 second intervals.

Cooling time by 0.1 second intervals.

Waterproof to IP65F. Service diagnostics.

Integral monitoring of operation time.

Compact GK 169B/170B High Output Vacuum Packaging Machine

v

m

Standard Features: Touch Screen Control Unit (illustrated).

High Pressure Double Biactive Sealing (illustrated).

Expansion Cushion with Snap-out Frame (illustrated).

Soft Start and Stop of Belt Controlled acceleration and braking prevent products from moving out of place as they enter the vacuum chamber.

Quick slackening of conveyor for easy cleaning.

Soft Start and Stop of Belt (illustrated).

Control box heating.

Optional Features: Pouch Piercing Knives (illustrated).

Cut-off Perforation Knives (illustrated).

Before evacuation

Shrink Bag Equipment.

Watercooled Sealing Bars.

Ridged Belt for round products.

During evacuation

Outfeed rollers 250mm or 500mm long.

Booster/vane pump combinations.

Compressed air consumption 50 Nl / min. 6 bar Electricity consumption without pump approx. 3.2 kW 250 m³/h 500 m³/h upon enquiry

Total weight without pump Total weight with integral pump

approx. 450 kg approx. 650 kg

Mains connection

B

Compressed air connection

A D

2 cu.ft. / min. 90 psi

B C

Integral vane pump or integral booster pump Other pump systems

A

B

C

1000 lbs 1440 lbs Water inlet

A D

~ 1800 (~ 71“) Water drain

Subject to change without notice.

2x 26“ 25½“ 1 8“ or 2¼“ 1 8“, 2¼“ or 3“

GK 170B: ~ 1700 (~ 67“)

2 x 660 mm 650 mm 35 or 55 mm 35, 55 or 75 mm upon inquiry

950 (37.4“)

35 x 29“ 7” 12“

640 (25.2“)

Seal bar length Distance between seal bars Fixed seal bar heights GK 169B Fixed seal bar heights GK 170B Other seal bar heights

890 x 740 mm 180 mm 300 mm

1250 (49.2“)

GK 169B GK 170B

620 (24.5“)

Chamber size Lid height

GK 169B: ~ 1550 (~ 61“)

Technical Data:

Supervac Ges.m.b.H. | Jochen Rindt Straße 3 | A-1230 Wien | Austria | t: +43 (0) 1 616 28 80 | f: +43 (0) 1 616 28 84 | e: office@supervac.at | www.supervac.at

Copyright © 2013 Supervac Ges.m.b.H. All rights reserved.

02/2013 | Supervac is a registered trademark of Supervac Ges.m.b.H.

Expansion Cushion with Snap-out Frame reduces evacuation time by up to 30% and prevents wrinkles on the upper side of the package.

速

intelligent vacuum packaging

GK 402B/403B

Supervac GK 402B/403B

seal bar cut-off perforation pouch piercing knives

High Pressure Double Biactive Sealing and Spring Loaded Resistance Wires are standard. Tough and reliable seals despite wrinkles, moisture and grease in the seal area.

Springs keep the resistance wires taut during continuous production, increasing the working life of resistance wires and teflon.

Pouch Piercing Knives (optional) pierce evacuation slots into overlength bags which protrude from the chamber so that the closing lid cannot obstruct evacuation.

Cut-off Perforation Knives (optional) leave the operator to simply remove surplus material from the pack after the vacuum packing has been completed.

Watercooled Seal Bars (optional) are recommended if the machine runs at 3 cycles/minute continuously or heat sensitive shrink bags are used. The water cooling stabilises the temperature of the seal bars.

The conveyorised stainless steel vacuum packaging machine with increased output from only one operator.

For meat, fish, cheese and all other food and non-food products.

GK 402B: with 200 mm lid height.

GK 403B: with 300 mm lid height.

Touch Screen Control Unit

Made of high quality stainless steel for ease of cleaning and maximum hygiene.

Simple touch control on screen.

Precision programming of machine functions.

Continuous display of cycle status in menus.

20 programmes in memory.

Alpha-numeric display for e.g. product name or bag material etc.

Integral digital vacuum meter.

Index value in mbar.

Evacuation mode : optimum possible for product. evacuation by time, 0.1 second intervals. desired final vacuum in mbar. interval evacuation.

Sealing time by 0.1 second intervals.

Cooling time by 0.1 second intervals.

Waterproof to IP65F. Service diagnostics.

Integral monitoring of operation time.

Compact GK 402B/403B High Output Vacuum Packaging Machine

v

m

Standard Features: Touch Screen Control Unit (illustrated).

High Pressure Double Biactive Sealing (illustrated).

Expansion Cushion with Snap-out Frame (illustrated).

Quick slackening of conveyor for easy cleaning.

Soft Start and Stop of Belt Controlled acceleration and braking prevent products from moving out of place as they enter the vacuum chamber.

Soft Start and Stop of Belt (illustrated).

Control box heating.

Optional Features: Pouch Piercing Knives (illustrated).

Cut-off Perforation Knives (illustrated).

Before evacuation

Shrink Bag Equipment.

Watercooled Sealing Bars.

Ridged Belt for round products.

During evacuation

Outfeed rollers 250mm or 500mm long.

Seal bar length Distance between seal bars Fixed seal bar heights GK 402B Fixed seal bar heights GK 403B Other seal bar heights

2 x 800 mm 650 mm 35 or 55 mm 35, 55 or 75 mm upon inquiry

2x 31½“ 25½“ 1 8“ or 2¼“ 1 8“, 2¼“ or 3“

Compressed air consumption Electricity consumption without pump

50 N l / min. 6 bar approx. 3.2 kW

2 cu.ft. / min. 90 psi

Integral vane pump or integral booster pump Other pump systems

250 m³/h 500 m³/h upon enquiry

Total weight without pump Total weight with integral pump

approx. 600 kg approx. 800 kg

Mains connection

B

Compressed air connection

C

D

D

Water drain

A

2125 (~84“)

650 (~25.5“)

620 (24.5“)

1322 lbs 1760 lbs Water inlet

B C D

Subject to change without notice.

A

A B C

Supervac Ges.m.b.H. | Jochen Rindt Straße 3 | A-1230 Wien | Austria | t: +43 (0) 1 616 28 80 | f: +43 (0) 1 616 28 84 | e: office@supervac.at | www.supervac.at

Copyright © 2013 Supervac Ges.m.b.H. All rights reserved.

04/2013 | Supervac is a registered trademark of Supervac Ges.m.b.H.

34½ x 33¾“ 8” 12“

925 (~36.5“)

870 x 860 mm 200 mm 300 mm

GK 402B GK 403B

1240 (~50“)

Chamber size Lid height

(min. 900 - max. 965)

Technical Data:

GK 402B: ~1490 (~59“) GK 403B: ~1590 (~63“)

Booster/vane pump combinations.

Expansion Cushion with Snap-out Frame reduces evacuation time by up to 30% and prevents wrinkles on the upper side of the package.

速

intelligent vacuum packaging

GK 501B

Supervac GK 501B

Trim Removal System (optional): Bag overlength is cut off by rotating knives on the way into the chamber. Surplus material drops into baskets. Adjustable rotation speed suitable for all kinds of laminate bags, gusseted bags of aluminium foil and shrink bags. Does the job of both cut-off perforation and pouch piercing knives.

High Pressure Double Biactive Sealing and Spring Loaded Resistance Wires are standard. Tough and reliable seals despite wrinkles, moisture and grease in the seal area. Springs keep the resistance wires taut during continuous production, increasing the working life of resistance wires and teflon.

Watercooled Seal Bars (optional) are recommended if the machine runs at 3 cycles/minute continuously or heat sensitive shrink bags are used. The water cooling stabilises the temperature of the seal bars.

Cut-off Perforation Knives (optional) leave the operator to simply remove surplus material from the pack after the vacuum packing has been completed.

The conveyorised stainless steel vacuum packaging machine with increased output from only one operator.

For meat, fish, cheese and all other food and non-food products.

Height Adjustable Sealing Bars (optional): Perfect appearance for all product heights.

seal bar cut-off perforation pouch piercing knives

Pouch Piercing Knives (optional) pierce evacuation slots into overlength bags which protrude from the chamber so that the closing lid cannot obstruct evacuation. (Not necessary for machines with Trim Removal System).

Touch Screen Control Unit Simple touch control on screen.

Precision programming of machine functions.

Continuous display of cycle status in menus.

20 programmes in memory.

Made of high quality stainless steel for ease of cleaning and maximum hygiene.

Alpha-numeric display for e.g. product name or bag material etc.

Integral digital vacuum meter.

Index value in mbar.

Evacuation mode : optimum possible for product. evacuation by time, 0.1 second intervals. desired final vacuum in mbar. interval evacuation.

Sealing time by 0.1 second intervals.

Cooling time by 0.1 second intervals.

Waterproof to IP65F. Service diagnostics.

Integral monitoring of operation time.

v

Compact GK 501B High Output Vacuum Packaging Machine.

m

Standard Features: Touch Screen Control Unit (illustrated).

High Pressure Double Biactive Sealing (illustrated).

Expansion Cushion with Snap-out Frame (illustrated).

Soft Start and Stop of Belt Controlled acceleration and braking prevent products from moving out of place as they enter the vacuum chamber.

Quick slackening of conveyor for easy cleaning.

Soft Start and Stop of Belt (illustrated).

Control box heating.

Optional Features: Height Adjustable Sealing Bars.

Trim Removal System (illustrated).

Before evacuation

Pouch Piercing Knives (illustrated).

Cut-off Perforation Knives (illustrated).

Shrink Bag Equipment.

During evacuation

Watercooled Sealing Bars.

Ridged Belt for round products.

Outfeed rollers 250mm or 500mm long.

Booster/vane pump combinations.

Compressed air consumption Electricity consumption without pump

50 Nl / min. 6 bar approx. 3.8 kW

Integral vane pump or integral booster pump Other pump systems

250 or 300 m³/h 500 or 1000 m³/h upon enquiry

Total weight without pump Total weight with integral pump

approx. 760 kg approx. 960 kg

Mains connection

B

Compressed air connection

C

A

D B C D 550 (~22“)

2 cu.ft. / min. 90 psi

B C

1670 lbs 2100 lbs Water inlet

A D

Water drain

~ 2834 (~112“) without trim removal ~ 3184 (~125“) with trim removal

Subject to change without notice.

2 x 1000 mm 2x 39 1 3“ 550 mm 21.6“ 0, 15, 35, 55 or 75 mm 0“, 8 , 1 3 8“, 2¼“ or 3“ upon inquiry 8 “ - 3“ 15 - 80 mm

905 (~36“)

Seal bar length Distance between seal bars Fixed seal bar heights Other seal bar heights Height adjustable seal bars

A

42.5“ x 32“ 7”

1195 (~47“)

1080 x 820 mm 180 mm upon inquiry

500 (~20“)

Chamber size Lid height Other lid heights

max. 1700 (~67“)

Technical Data:

Supervac Ges.m.b.H. | Jochen Rindt Straße 3 | A-1230 Wien | Austria | t: +43 (0) 1 616 28 80 | f: +43 (0) 1 616 28 84 | e: office@supervac.at | www.supervac.at

Copyright © 2013 Supervac Ges.m.b.H. All rights reserved.

02/2013 | Supervac is a registered trademark of Supervac Ges.m.b.H.

Expansion Cushion with Snap-out Frame reduces evacuation time by up to 30% and prevents wrinkles on the upper side of the package.

速

intelligent vacuum packaging

GK 600B / 610B

SUPERVAC GK 600B / GK 610B SERIES

Height Adjustable Sealing Bars (optional for GK 602B / GK 603B): Perfect appearance and flexibility for all product heights.

Watercooled Seal Bars (optional) are recommended if the machine runs at 3 cycles/minute continuously or heat sensitive shrink bags are used. The water cooling stabilises the temperature of the seal bars.

High Pressure Double Biactive Sealing and Spring Loaded Resistance Wires are standard. Tough and reliable seals despite wrinkles, moisture and grease in the seal area.

Springs keep the resistance wires taut during continuous production, increasing the working life of resistance wires and teflon.

Cut-off Perforation Knives (optional) leave the operator to simply remove surplus material from the pack after the vacuum packing has been completed.

The conveyorised stainless steel vacuum packaging machine with increased output for meat, fish, cheese and all other food and non-food products.

GK 602B - Standard machine with 200 mm chamber height GK 603B - Standard machine with 300 mm chamber height GK 612B - Split-belt machine for single operator use with 200 mm chamber height GK 613B - Split-belt machine for single operator use with 300 mm chamber height Touch Screen Control Unit Simple touch control on screen.

Made of high quality stainless steel for ease of cleaning and maximum hygiene.

Precision programming of machine functions.

Continuous display of cycle status in menus.

20 programmes in memory.

Programme accessable via password.

Alpha-numeric display for e.g. product name or bag material etc.

Integral digital vacuum meter.

Index value in mbar.

Evacuation mode :

Optimum possible for product.

Evacuation by time, 0.1 second intervals.

Desired final vacuum in mbar.

Interval evacuation.

Sealing time by 0.1 second intervals.

Cooling time by 0.1 second intervals.

Waterproof to IP65F.

Service diagnostics.

Integral monitoring of operation time.

Integrated control of shrink tank and drier when supplied as a complete line.

GK 600B / GK 610B Series High Output Vacuum Packaging Machines Standard Features: Touch Screen Control Unit (illustrated).

seal bar cut-off perforation pouch piercing knives

High Pressure Double Biactive Sealing (illustrated).

Expansion Cushion with Snap-out Frame (illustrated).

Pouch Piercing Knives (optional) pierce evacuation slots into overlength bags which protrude from the chamber so that the closing lid cannot obstruct evacuation. (Not necessary for machines with Trim Removal System).

Quick slackening of conveyor for easy cleaning.

Soft Start and Stop of Belt.

Control box heating.

Optional Features: Height Adjustable Sealing Bars (for GK 602B / GK 603B).

Trim Removal System.

Pouch Piercing Knives (illustrated).

Before evacuation

Cut-off Perforation Knives (illustrated).

Shrink Bag Equipment.

Watercooled Sealing Bars.

During evacuation

Ridged Belt for round products (for GK 602B / GK 603B).

Expansion Cushion with Snap-out Frame reduces evacuation time by up to 30% and prevents wrinkles on the upper side of the package.

Outfeed roller conveyor 250mm or 500mm.

Booster/vane pump combinations.

Technical Data:

Integral booster pump ...................................... 1000 or 1250 m³/h External vacuum pump ..................................... 2 x 250 or 630 m³/h Other pump systems ......................................... upon inquiry Approx. weight without pump ....................... approx. 1000 kg

A

Mains connection

C

Water inlet

B

Compressed air connection

D

Water drain

/8“ - 3“

max. 1850 ( 73“)

GK 602B / GK 603B without trim removal 2650 (~ 104“)

3.2 cu.ft. / min. 90 psi

GK 602B / GK 603B with trim removal 3000 (~ 118“)

B C D A

GK 612B / GK 613B all versions 3090 (~ 122“)

Subject to change without notice.

®

Supervac Maschinenbau GmbH | Jochen-Rindt-Strasse 3 | 1230 Wien | Austria | t: +43 1 616 28 80 | f: +43 1 616 28 84 | e: office@supervac.at | www.supervac.at

03/2016 | Supervac is a registered trademark of Supervac Maschinenbau GmbH. Copyright © 2016 Supervac Maschinenbau GmbH. All rights reserved.

Compressed air consumption ...................... 80 Nl / min. 6 bar Electricity consumption without pump.... approx. 3,8 kW

5

1380 (54“)

15 – 80 mm

C D A

910 (36“)

2 x 1000 mm 2x 39 1/3“ 830 mm 32 2/3“ 15, 35, 55 or 75 mm 5/8“, 1 3/8“, 2 1/4“ , 3“ upon inquiry

B

830 (33“)

Seal bar length .......................................................

Distance between seal bars ..........................

Fixed seal bar heights ........................................

Other seal bar heights ......................................

Height adjustable seal bars (GK 602B / GK 603B)...........................................

44“ x 43“ 8“ 12“

730 (29“)

Chamber size............................................................ 1120 x 1100 mm Lid height .................. .GK 602B / GK 612B .... 200 mm

.GK 603B / GK 613B .... 300 mm

速

intelligent vacuum packaging

GK 650B / 660B

Supervac GK 650B / GK 660B Series

Straight Cut-off Knives in chamber to cut off surplus material. Exhaust System to suck out trimmed film into a container unit sited under the machine infeed section (optional). No need to remove the bag overlength manually.

Watercooled Seal Bars (optional) only necessary when aluminium bags are used.

High Pressure Double Biactive Sealing and Spring Loaded Resistance Wires are standard. Tough and reliable seals despite wrinkles, moisture and grease in the seal area.

Springs keep the resistance wires taut during continuous production, increasing the working life of resistance wires and teflon.

Cut-off Perforation Knives (optional) leave the operator to simply remove surplus material from the pack after the vacuum packing has been completed.

The conveyorised high performance vacuum packaging machine with increased output for meat, fish, cheese and all other food and non-food products.

GK 652B – Standard machine with 200 mm lid height.

GK 653B – Standard machine with 300 mm lid height.

GK 662B – Split-belt machine for single operator use with 200 mm lid height.

GK 663B – Split-belt machine for single operator use with 300 mm lid height.

Touch Screen Control Unit Simple touch control on screen.

Made of high quality stainless steel for ease of cleaning and maximum hygiene.

7.7“ colour display.

Precision programming of machine functions.

Continuous display of cycle status in menus.

20 programmes in memory.

Programme accessible via password.

Alpha-numeric display for e.g. product name or bag material etc.

Integral digital vacuum meter.

Index value in mbar.

Evacuation mode: Optimum possible for product.

Evacuation by time, 0.1 second intervals.

Desired final vacuum in mbar.

Interval evacuation.

Sealing time by 0.1 second intervals.

Cooling time by 0.1 second intervals.

Waterproof to IP65F. Service diagnostics.

Integral monitoring of operation time.

Integrated control of shrink tank and drier when supplied as a complete line.

GK 650B / GK 660B Series High Output Vacuum Packaging Machines Standard Features: Touch Screen Control Unit (illustrated).

seal bar straight or perforation knives pouch piercing knives

High Pressure Double Biactive Sealing (illustrated).

Expansion Cushion with Snap-out Frame (illustrated).

Pouch Piercing Knives (optional) pierce evacuation slots into overlength bags which protrude from the chamber so that the closing lid cannot obstruct evacuation.

Shrink Bag Equipment.

Quick slackening of conveyor for easy cleaning.

Soft Start and Stop of Belt.

Control box heating.

Optional Features:

Before evacuation

Pouch Piercing Knives (illustrated).

Cut-off Perforation Knives (illustrated).

Straight Cut-off Knives with Exhaust System (illustrated).

During evacuation

Watercooled Sealing Bars (for use only with aluminium bags).

Expansion Cushion with Snap-out Frame reduces evacuation time by up to 30% and prevents wrinkles on the upper side of the package.

Ridged Belt for round products (for GK 652B / GK 653B).

Outfeed rollers 250mm or 500mm long.

47“ x 41“ 8“ 12“

Seal bar length Distance between seal bars Fixed seal bar heights Other seal bar heights

2 x 1100 mm 830 mm 45, 65 or 85 mm upon inquiry

2x 43.3“ 32.7“ 1.8“, 2.6“ or 3.3“

Compressed air consumption Electricity consumption without pump

150 Nl/min. 6 bar 6 cu.ft./min. 90 psi approx. 4 kW

Integral booster pump with frequency control External vacuum pump Other pump systems

1250 m³/h 630 m³/h or 2x 250 m³/h upon inquiry

Total weight without pump

approx. 1400 kg

940 (37“)

C B A H C B

3100 Ibs

A

Mains connection

C

Water inlet

B

Compressed air connection

H

Vacuum connection

H A

GK 652B – GK 663B all versions 3310 (~130“)

1500 (59“)

760 (30“)

ARB 250

Subject to change without notice.

1200 x 1050 mm 200 mm 300 mm

GK 652B / GK 662B GK 653B / GK 663B

830 (~33“)

Chamber size Lid height

max. 1940 (~76“)

Technical Data:

Supervac Ges.m.b.H. | Jochen Rindt Straße 3 | A-1230 Wien | t: +43 (0) 1 616 28 80 | f: +43 (0) 1 616 28 84 | e: office@supervac.at | www.supervac.at

Copyright © 2013 Supervac Ges.m.b.H. All rights reserved.

04/2013 | Supervac is a registered trademark of Supervac Ges.m.b.H.

Booster/vane pump combinations.

速

intelligent vacuum packaging

GK 850B / 860B

Supervac GK 850B / GK 860B Series

Straight Cut-off Knives in chamber to cut off surplus material. Exhaust System to suck out trimmed film into a container unit sited under the machine infeed section (optional). No need to remove the bag overlength manually.

Watercooled Seal Bars (optional) only necessary when aluminium bags are used.

Height Adjustable Sealing Bars (optional for GK 852B / GK 853B): Perfect appearance and flexibility for all product heights.

High Pressure Double Biactive Sealing and Spring Loaded Resistance Wires are standard. Tough and reliable seals despite wrinkles, moisture and grease in the seal area.

Springs keep the resistance wires taut during continuous production, increasing the working life of resistance wires and teflon.

Cut-off Perforation Knives (optional) leave the operator to simply remove surplus material from the pack after the vacuum packing has been completed.

The conveyorised high performance vacuum packaging machine with increased output for meat, fish, cheese and all other food and non-food products.

GK 852B – Standard machine with 200 mm lid height.

GK 853B – Standard machine with 300 mm lid height.

GK 862B – Split-belt machine for single operator use with 200 mm lid height.

GK 863B – Split-belt machine for single operator use with 300 mm lid height.

Touch Screen Control Unit Simple touch control on screen.

Made of high quality stainless steel for ease of cleaning and maximum hygiene.

7.7“ colour display.

Precision programming of machine functions.

Continuous display of cycle status in menus.

20 programmes in memory.

Programme accessible via password.

Alpha-numeric display for e.g. product name or bag material etc.

Integral digital vacuum meter.

Index value in mbar.

Evacuation mode: Optimum possible for product.

Evacuation by time, 0.1 second intervals.

Desired final vacuum in mbar.

Interval evacuation.

Sealing time by 0.1 second intervals.

Cooling time by 0.1 second intervals.

Waterproof to IP65F. Service diagnostics.

Integral monitoring of operation time.

Integrated control of shrink tank and drier when supplied as a complete line.

GK 850B / GK 860B Series High Output Vacuum Packaging Machines Standard Features: Touch Screen Control Unit (illustrated).

High Pressure Double Biactive Sealing (illustrated).

seal bar straight or perforation knives pouch piercing knives

Expansion Cushion with Snap-out Frame (illustrated).

Shrink Bag Equipment.

Pouch Piercing Knives (optional) pierce evacuation slots into overlength bags which protrude from the chamber so that the closing lid cannot obstruct evacuation.

Quick slackening of conveyor for easy cleaning.

Soft Start and Stop of Belt.

Dual Evacuation System.

Control box heating.

Optional Features: Height Adjustable Sealing Bars (for GK 852B / GK 853B).

Programmable on Touch Screen Control Unit.

Before evacuation

Pouch Piercing Knives (illustrated).

Cut-off Perforation Knives (illustrated).

Straight Cut-off Knives with Exhaust System (illustrated).

During evacuation

Watercooled Sealing Bars (for use only with aluminium bags).

Expansion Cushion with Snap-out Frame reduces evacuation time by up to 30% and prevents wrinkles on the upper side of the package.

Ridged Belt for round products (for GK 852B / GK 853B).

Outfeed rollers 250mm or 500mm long.

Seal bar length Distance between seal bars Fixed seal bar heights Other seal bar heights Height adjustable seal bars (GK 852B / GK 853B)

2 x 1300 mm 830 mm 45, 65 or 85 mm upon inquiry

2x 51“ 32.7“ 1.8“, 2.6“ or 3.3“

25 – 90 mm

1“ - 3.5“

Compressed air consumption Electricity consumption without pump

150 Nl/min. 6 bar 6 cu.ft./min. 90 psi approx. 4 kW

Integral booster pump with frequency control External vacuum pump Other pump systems

1250 m³/h 630 m³/h upon inquiry

Total weight without pump

approx. 1540 kg

C B A

max. 1940 (~76“)

55“ x 44“ 8“ 12“

H C B

A

Mains connection

C

Water inlet

B

Compressed air connection

H

Vacuum connection

H

A

GK 852B - GK 863B all versions 3680 (~ 145“)

1500 (59“)

3400 Ibs

830 (~33“)

ARB 250

Subject to change without notice.

1390 x 1110 mm 200 mm 300 mm

GK 852B / GK 862B GK 853B / GK 863B

760 (30“)

Chamber size Lid height

940 (37“)

Technical Data:

Supervac Ges.m.b.H. | Jochen Rindt Straße 3 | A-1230 Wien | t: +43 (0) 1 616 28 80 | f: +43 (0) 1 616 28 84 | e: office@supervac.at | www.supervac.at

Copyright © 2013 Supervac Ges.m.b.H. All rights reserved.

02/2013 | Supervac is a registered trademark of Supervac Ges.m.b.H.

Booster/vane pump combinations.

速

intelligent vacuum packaging

GK 1600B Supervac GK 1600B Suitable for packaging especially long products such as sausages, ham or cheese of a length of up to 1600 mm.

Industrial companies, which want to store logs of meat, cheese, etc., before slicing, can therefore package their products easily and safely.

Can be optionally used as a version for 1 product per cycle (caliber maximum 150 mm with round products, or maximum 180 mm in width and 150 mm in height with square products) or 2 products per cycle (caliber maximum 100 mm with round products).

The loading is done manually or fully automated in conjunction with a flow pack machine.

During the loading of the machine, the sealing bar is automatically recessed in order to move the product easily from the feed belt to the chamber belt.

Depending on the selected pump combination, the booster pump and rotary vane pumps required for operation can be integrated in the housing of the machine as well as that of the feed belt and outfeed belt.

Optionally available with driven feed and outfeed belt.

Convenient opening of all cover hoods facilitates easy cleaning.

Robust construction made of corrosion-resistant stainless steel.

GK 1600B High Output Vacuum Packaging Machines Standard equipment: Touch screen control.

Double biactive high-pressure sealing.

Quick easing of tension of the conveyor belt for easy cleaning.

The double biactive high-pressure sealing as well as spring-loaded resistance wires are an integral part of the standard equipment and guarantee safe and reliable seals.

Gentle start and stop of the conveyor belt.

Fixed sealing heights optional in 45, 55, 65 or 75 mm.

Convex, i.e. slightly bent up, chamber belt.

Options: Pouch Piercing knives for overlong bags.

Cut-off perforation.

Water-cooled sealing bars.

Height adjustable sealing bars in 2 steps 45 and 75 mm.

Flat chamber belt.

Simple and easy operation by finger pressure directly on the screen. The work process is monitored electronically and displayed in comprehensible and well-arranged on-screen menus.

Driven feed and outfeed belt.

Booster and rotary van pump combinations.

930 1680

2020 3700

A

Mains connection

B

Compressed air connection

C

Water inlet

Subject to change without notice.

®

Supervac Maschinenbau GmbH | Jochen-Rindt-Strasse 3 | 1230 Wien | Austria | t: +43 1 616 28 80 | f: +43 1 616 28 84 | e: office@supervac.at | www.supervac.at

04/2016 | Supervac is a registered trademark of Supervac Maschinenbau GmbH. Copyright © 2016 Supervac Maschinenbau GmbH. All rights reserved.

1035 +/- 30mm

A B C

660

Chamber size ................................................................. 1835 x 505 mm Sealing bar length ....................................................... 380 mm Maximum product length ........................................ 1600 mm Maximum product height ........................................ 150 mm Compressed air consumption .............................. 120 Nl/min. 6 bar Power supply (without vacuum pump) ............. ca. 3 kW Built-in vacuum pump, frequency-controlled.................................................. 1250 m³/h Rotary vane pump ....................................................... 630 m³/h od. 2 x 250 m³/h Total weight without pump ..................................... ca. 1800 kg

1815 +/- 30mm

Technical Data:

ÂŽ

intelligent vacuum packaging

Supervac AT 8 Hot Water Shrink Tank All stainless steel construction.

Heating by electricity and/or steam.

Touch Screen Control Unit (menu driven).

Silent running Intralox conveyor belt guarantees safe product flow.

Fully insulated - minimum heat loss.

Reduced energy consumption.

Integrated adjustable vapour exhaust.

AT 8 Hygienic design – easy to clean.

Reliable and easy to service.

Total immersion gives maximum shrink and best product appearance.

Switchable to non-dipping mode for laminate bags.

Reduction of open water surface to prevent heat loss and evaporation.

Control box heating.

The Compact Supervac Concept Automatic control of water level.

Automatic temperature control with digital display of actual and set values.

Adjustable dipping time, adjustable dipping depth.

Adjustable time for drip-off.

Stand-by function for dipping: - the drive motor of the dipping platform is switched off when there is no product on the way.

Touch Screen Control Unit including preheating timer.

Stand-by function for vapour exhaust: - ventilator is switched off when there is no product on the way.

Outfeed rollers (optional): ARB 1000 for boxing - height angle adjustable - with basin and drain for drip-off water - or alternatively ARB 180 for discharge to other conveyors.

ERB 110 infeed rollers (optional).

Integrated control for infeed and outfeed conveyors (optional).

Technical Data:

F

E

~ 50 (~ 2“)

1012 (~ 40“)

F

E

ERB110

A

Mains connection

B

Compressed air

275 (~ 11“)

R 1/4“ - Ø 9 mm min. 6 bar (85 psi)

G D

660 (~ 26“)

B

max. 905 (~ 36“)

min. 765 (~ 30“)

ARB180

C

C B

G D

A

C

Water inlet

R ½“ max. 8 bar (112 psi)

D

Water drain

R 5/4“

E

Vapour exhaust

Ø 125 mm

F

Steam connection (AT 8D)

R 3/4“

G

Overflow (AT 8D)

R 3/4“

Supervac Ges.m.b.H. | Jochen Rindt Straße 3 | A-1230 Wien | t: +43 (0) 1 616 28 80 | f: +43 (0) 1 616 28 84 | e: office@supervac.at | www.supervac.at

Copyright © 2012 Supervac Ges.m.b.H. All rights reserved.

04/2013 | Supervac is a registered trademark of Supervac Ges.m.b.H.

~ 120 (~ 5“)

Up to 7 cycles per minute.

860 x 660 mm (33.8 x 26“) 660 mm (26“) 280 mm (11“) approx. 240 litres 30 kW approx. 0.31 m/sec. 50Hz (0.37 m/sec. 60Hz) approx. 150 Nl /min. at 6 bar (85 psi) 34 kg/h at max. 6 bar (max. 85 psi) approx. 400 kg (approx. 882 lbs)

Subject to change without notice.

Dipping platform accessible without draining of water. Lid and platform swing upwards and the basin is freely accessible for cleaning.

Dipping strokes Surface of dipping platform Max. pass-through width Max. pass-through height Basin volume AT 8E: max. heating Conveyor speed Compressed air consumption AT 8D: Steam consumption (max.)

Weight

ÂŽ

intelligent vacuum packaging

Supervac AT 15 Hot Water Shrink Tank All stainless steel construction.

Heating by electricity and/or steam.

Touch Screen Control Unit (menu driven).

Silent running Intralox conveyor belt guarantees safe product flow.

Fully insulated - minimum heat loss.

Reduced energy consumption.

Integrated adjustable vapour exhaust.

AT 15 Hygienic design – easy to clean.

Reliable and easy to service.

Total immersion gives maximum shrink and best product appearance.

Switchable to non-dipping mode for laminate bags.

Reduction of open water surface to prevent heat loss and evaporation.

Control box heating.

The Supervac High Output Concept Automatic control of water level.

Automatic temperature control with digital display of actual and set values.

Adjustable dipping time, adjustable dipping depth.

Adjustable time for drip-off.

Stand-by function for dipping: - the drive motor of the dipping platform is switched off when there is no product on the way.

Touch Screen Control Unit including preheating timer.

Stand-by function for vapour exhaust: - ventilator is switched off when there is no product on the way.

Outfeed rollers (optional): ARB 1500 for boxing - height angle adjustable - with basin and drain for drip-off water or alternatively ARB 200 for discharge to other conveyors.

ERB 130 Infeed rollers (optional).

Powered silent running Intralox infeed conveyor 600mm (optional).

Integrated control for infeed and outfeed conveyors (optional).

Technical Data:

Dipping platform accessible without draining of water. Lid and platform swing upwards and basin is freely accessible for cleaning.

F ~ 50 (~ 2“)

E

B

Compressed air

R 3/8“ - Ø 12 mm min. 5 bar (70 psi)

B G D

585 (23“)

860 (~34“)

1425 (56“)

min. 810 (32“)

1130 (~44.5“)

Mains connection

F

C

A

C

Water inlet

R ½“ max. 8 bar (112 psi)

D

Water drain

R 5/4“

E

Vapour exhaust

Ø 125 mm

F

Steam connection (AT 15D)

R 1“

G

Overflow (AT 15D)

R 3/4“

Subject to change without notice.

A

B C G D

max. 950 (37“)

~ 1470 (~ 58“)

305 (12“)

1230 (48.5“)

185 (7.3“)

E ~ 120 (~ 4.7“)

Up to 7 cycles per minute.

1040 x 860 mm (41 x 34“) 860 mm (34“) 300 mm (11 ½“) approx. 460 litres 45 kW approx. 0.32 m/sec. 50Hz (0.38 m/sec. 60Hz) approx. 220 Nl / min. at 5 bar (70 psi) 65 kg/h at max. 6 bar (max. 85 psi) approx. 580 kg (approx. 1280 lbs)

Supervac Ges.m.b.H. | Jochen Rindt Straße 3 | A-1230 Wien | Austria | t: +43 (0) 1 616 28 80 | f: +43 (0) 1 616 28 84 | e: office@supervac.at | www.supervac.at

Copyright © 2012 Supervac Ges.m.b.H. All rights reserved.

04/2013 | Supervac is a registered trademark of Supervac Ges.m.b.H.

Dipping strokes Surface of dipping platform Max. pass-through width Max. pass-through height Basin volume AT 15E: max. heating Conveyor speed Compressed air consumption AT 15D: Steam consumption (max.)

Weight

®

intelligent vacuum packaging

Supervac AS 660 Automatic Spray Tunnel All stainless steel construction.

Completely insulated.

Heating by electricity and/or steam.

Touch screen control (20 programmes).

Integral wide mesh Intralox conveyor for safe product flow.

Adjustable conveyor speed 0.1 – 0.4 m/sec.

Integrated adjustable vapour exhaust.

AS 660 Hygienic design – easy to clean.

Reliable and easy to service.

Two water sprays from above and two sprays from below.

Pass through function via touch screen.

Automatic control of water temperature and water level.

Shrink temperature up to 95°C. Fitted with ERB 130 infeed rollers and ARB 130 outfeed rollers.

AS 660 Automatic Spray Tunnel for constant in line product flow.

Feed through width – 660 mm for use with constant flow of packs from vacuum packaging, thermoforming or flowwrapping machines.

Touch screen control unit (illustrated).

20 programmes in memory.

Touch Screen Control Unit including preheating timer.

Alpha numeric display.

Programmable water temperature and conveyor speed.

Preheating clock settable by time and day.

Waterproof to IP65F. Control box heating.

Technical Data:

Conveyor speed Steam consumption Weight

Two water sprays from above and two sprays from below.

660 mm 300 mm approx. 250 litres 37 kW electric heating 1 kW steam heating 0.1 – 0.4 m / sec.

50 kg/h at max. 6 bar approx. 350 kg

AS 660E AS 660D AS 660D

(26 ”) (11.8 “)

(max. 85 psi) (approx. 770 lbs)

G B C D

A

1040 (~41“)

A B

Mains connection

Compressed air (AS 660D)

R ¼“ - Ø 9 mm min. 6 bar (85 psi)

C

Water inlet

R ½“ max. 8 bar (112 psi)

D

Water drain

R ¾“

E

Vapour exhaust

Ø 125 mm

F

Steam connection (AS 660D) R ¾“

G

Overflow (AS 660D)

R 3/4“

Subject to change without notice.

680 (~27”)

1280 (~50“)

min. 760 (~30“)

max. 900 (~35“)

F E

B C A D G

max. 860 (~34“)

min. 720 (~28“)

~1375 (~54“)

F E

Supervac Ges.m.b.H. | Jochen Rindt Straße 3 | A-1230 Wien | Austria | t: +43 (0) 1 616 28 80 | f: +43 (0) 1 616 28 84 | e: office@supervac.at | www.supervac.at

Copyright © 2013 Supervac Ges.m.b.H. All rights reserved.

08/2012 | Supervac is a registered trademark of Supervac Ges.m.b.H.

Pass through width Max. product height Basin volume Electricity consumption

®

intelligent vacuum packaging

Supervac AS 400 Automatic Spray Tunnel with integrated Drier.

All stainless steel construction.

Completely insulated.

Heating by electricity and/or steam.

Touch screen control (20 programmes).

Integral wide mesh Intralox conveyor for safe product flow.

Adjustable conveyor speed 0.1 – 0.4 m/sec.

Integrated adjustable vapour exhaust.

AS 400 Hygienic design – easy to clean.

Reliable and easy to service.

Two water sprays from above and one spray from below.

One height adjustable top air knife and one bottom air knife.

Pass through function via touch screen.

Automatic control of water temperature and water level.

Shrink temperature up to 95°C. Fitted with ERB 130 infeed rollers and ARB 130 outfeed rollers.

Machine runs from left to right.

AS 400 Automatic Spray Tunnel for constant in line product flow.

Feed through width – 400 mm for use with constant flow of small products from vacuum packaging, thermoforming or flowwrapping machines.

Touch screen control unit (illustrated).

20 programmes in memory.

Touch Screen Control Unit including preheating timer.

Alpha numeric display.

Programmable water temperature and conveyor speed.

Preheating clock settable by time and day.

Waterproof to IP65F. Control box heating.

Technical Data:

Left Right

Conveyor speed Steam consumption Weight

- Two water sprays from above and one water spray from below.

- Integrated blow off unit.

400 mm 280 mm approx. 120 litres 35 kW electric heating 5 kW steam heating 0.1 – 0.4 m / sec.

34 kg/h at max. 6 bar approx. 450 kg

AS 400E AS 400D AS 400D

(16 ”) (11 “)

(max. 85 psi) (approx. 990 lbs)

A 1685 (~66”)

D A G C B A B

Mains connection

Compressed air (AS 400D)

R ¼“ - Ø 9 mm min. 6 bar (85 psi)

E

C

Water inlet

R ½“ max. 8 bar (112 psi)

D

Water drain

R ¾“

E

Vapour exhaust

Ø 125 mm

F

Steam connection (AS 400D) R ¾“

G

Overflow (AS 400D)

R 3/4“

Subject to change without notice.

F

1045 (~41“)

G B C D

400 (~16“)

~1375 (~54“)

min. 705 (~28“)

max. 845 (~33“)

min. 800 (~31“)

max. 940 (~37“)

F E

Supervac Ges.m.b.H. | Jochen Rindt Straße 3 | A-1230 Wien | Austria | t: +43 (0) 1 616 28 80 | f: +43 (0) 1 616 28 84 | e: office@supervac.at | www.supervac.at

Copyright © 2013 Supervac Ges.m.b.H. All rights reserved.

04/2013 | Supervac is a registered trademark of Supervac Ges.m.b.H.

Pass through width Max. product height Basin volume Electricity consumption

®

intelligent vacuum packaging

Supervac BL 15 Drier All high quality stainless steel construction.

2 integral Busch side channel blowers with up to 1400 m³/h output.

Fitted with top and bottom air knives for superb drying results.

Silent running.

Easy to maintain.

Hygienic design – easy to clean.

BL 15 2 top air knives, both fitted with infra red light sensors, follow the product contours and the powerful air jets remove even lying water from crevices and hollows on the product surface. The product is then ready for efficient labelling.

1 bottom air knife dries the base of the pack which can then be boxed in less expensive unlined cartons.

Control box heating.

Up-to-date Drying with Supervac BL 15 Pass-through width: 860 mm.

Stand-by function for air blowers and drive motor, when there is no product on the way.

Switchable to ‘non-drying’ mode.

Variable conveyor speed.

Powered silent running Intralox infeed conveyor 600 x 880 mm (optional). Necessary when drier is fed directly from a shrink tank or tunnel.

ERB 130 infeed rollers 130 x 880 mm (optional).

Necessary when drier is fed from a standard conveyor belt.

Simply cleaned: Slide out the complete conveyor unit. All areas are then freely accessible.

ARB 200 outfeed rollers 200 x 880mm (standard).

ARB 1500 outfeed rollers 1500 x 880mm (optional).

Technical Data: 860 mm 300 mm approx. 0.04 - 0.12 m/sec. approx. 50 Nl/min. at 5 bar 11.5 kW (50Hz) approx. 600 kg

(34“) (11½“) (70 psi) 13.5 kW (60Hz) (approx. 1325 lbs)

1780 (70“) 540 (21“)

~80 (~3“)

Powered infeed conveyor (optional)

B A D

Mains connection

B

Compressed air

860 (34“) R 3/8“ - Ø 12 mm

D

Water Drain

Powered infeed conveyor (optional)

R 3/4“

Subject to change without notice.

A

860 (34“)

B A D

min. 775 (31“) - max. 915 (36“)

~1400 (~55“)

ETB 600

1270 (50“)

1080 (43“)

296 (12“)

~80 (~3“)

Supervac Ges.m.b.H. | Jochen Rindt Straße 3 | A-1230 Wien | Austria | t: +43 (0) 1 616 28 80 | f: +43 (0) 1 616 28 84 | e: office@supervac.at | www.supervac.at

Copyright © 2013 Supervac Ges.m.b.H. All rights reserved.

04/2013 | Supervac is a registered trademark of Supervac Ges.m.b.H.

Pass-through width Max. pass-through height Variable conveyor speed Compressed air consumption Electricity consumption Weight