The solution to the limitations of conventional external hexagon.
• Ensures the integrity of external hexagon; • Maintains original rotational freedom; • More practicality and safety; • Increased mechanical strength to the insertion; • Transport tweezers to the safety in handling the implant.
Area of Internal torque.
58
Tweezers that ensures increased safety in the implant transport.
Externa l Hex
COMPONENTS INDICATION TABLE
Hex 2.37 mm
1 mm
Ø3
.3
mm
He x2
Internal Thread Ø 1.8
EXTERNAL HEX
Internal Thread Ø 2.0
.1 m
m
Ø 4.1
Ø
4.3
mm He x3
.3
1 mm
Ø
5.0
mm
mm
Internal Thread Ø 2.0
1 mm
Internal Thread Ø 2.5
m
•Angled Post 17° •Castable UCLA •Titanium UCLA •CoCr UCLA
•SF Mini Conical Abutment (multiple) •Angled Mini Conical Abutment 17°and 30° (multiple) •SF Conical Abutment (single) •Castable UCLA •Noble UCLA •CoCr UCLA
•Angled Post 17° and 30° •Universal Post •Customizable Post •Castable UCLA •Noble UCLA •Titanium UCLA •CoCr UCLA
•Mini Ball Attachment
•Mini Conical Abutment (multiple) •Angled Mini Conical Abutment 17°and 30° (multiple) •Conical Abutment (single) •Castable UCLA •CoCr UCLA
•Angled Post 17° •Universal Post •Castable UCLA •Titanium UCLA •CoCr UCLA
•Mini Ball Attachment
Protocol
Ø 4.3
Ø 5.0
4.5 and 5.0 mm
•Mini Conical Abutment •Angled Mini Conical Abutment 17°and 30° •Cylinder and Distal External Bar Passive Fitting Technique •Castable Cylinder of Mini Abutment •Titanium Cylinder of Mini Abutment •Brass Cylinder of Mini Abutment
4.3 mm •SF Mini Conical Abutment (multiple) •Angled Mini Conical Abutment 17° and 30° (multiple) •SF Conical Abutment (1 piece) •Castable UCLA •CoCr UCLA
•Mini Conical Abutment •Angled Mini Conical Abutment 17°and 30° •Cylinder and Distal External Bar Passive Fitting Technique •Castable Cylinder of Mini Abutment •Titanium Cylinder of Mini Abutment •Brass Cylinder of Mini Abutment
3.75 and 4.0 mm
He x2
.7 m
Overdenture
3.3 and 3.5 mm
m
Ø4
Cemented Prosthesis
•Castable UCLA •CoCr UCLA
Ø 3.3
.7 m
0.7 mm
Screw-retained Prosthesis
•Angled Post 17° •Customizable Post •Castable UCLA •Titanium UCLA •CoCr UCLA
•Mini Ball Attachment
•Mini Conical Abutment •Angled Mini Conical Abutment 17°and 30° •Cylinder and Distal External Bar Passive Fitting Technique •Castable Cylinder of Mini Abutment •Titanium Cylinder of Mini Abutment •Brass Cylinder of Mini Abutment
59
Product Characteristics: •Cylindrical implant with External Hex interface; •NeoPoros Surface; •Capture and installation with contra-angle or manual without mount use (reduction of surgical time); •Installation by the internal hexagon of the implant, increasing the mechanical strength when high torques are applied, preserving the integrity of the external hexagon; •Double thread (faster installation and less trauma); •High cutting capacity; •Suitable for bones type I and II and grafting areas in block •Cover screw and mount not included; •Prosthetic platform: 4.1mm and 5.0mm; •Perforation rotation: 800-1200 rpm; •Installation rotation: 30 rpm.
Countersink 5.0 SF
Titamax Drill 4.3
Titamax Drill 3.8
Countersink 4.1 SF
Pilot 3/3.75
Titamax Drill 3.3
Titamax Drill 3.15
Titamax Drill 3.0
Pilot 2/3
Titamax Drill 2.0
Initial Drill
Drill sequence
3.75 mm 4.0 mm 4.5 mm 5.0 mm Optional
60
Externa l Hex
7.0 mm
9.0 mm
11.0 mm
13.0 mm
15.0 mm
17.0 mm
109.284
109.285
109.286
109.287
109.288
109.302
109.303
109.304
109.305
109.306
109.327
109.328
109.329
109.295
109.296
109.297
Ø 3.75 Platform (4.1)
Ø 4.0
Platform (4.1)
Ø 4.5
Platform (5.0)
Ø 5.0 Platform (5.0)
109.294
•Use Digital Driver 0.9mm (104.039) to the
Cover Screw 4.1 mm
5.0 mm
117.018
117.003
installation of Cover Screw platform 4.1 and Digital Driver 1.2mm (104.007) to the installation of Cover Screw platform 5.0; •Do not exceed torque of 10 N.cm.
Divergent Healings
Slim Fit Healings
2.0 mm
3.0 mm
4.0 mm
Ø 4.1
106.092
106.093
106.094
Ø 5.0
106.127
106.128
106.129
2.0 mm
3.0 mm
4.0 mm
Ø 4.1
106.190
106.191
106.192
Ø 5.0
106.195
106.196
106.197
61
Internal Torque
Product Characteristics: •Cylindrical implant with External Hex interface; •NeoPoros Surface; •Capture and installation with contra-angle or manual without mount use (reduction of surgical time); •Installation through implant internal hex, increasing the mechanical resistance (when applied elevated torque), preserving the external hex integrity; •Double thread (faster installation and less trauma); •High compaction capacity (bone expansion); •Suitable for bones type III and IV; •Cover screw not included; •Simplified instrumentation in the prepare of surgical alveolus; •Prosthetic platform 4.1mm; •Perforation rotation: 800-1200 rpm; •Installation rotation: 30 rpm.
Titamax Drill 3.0
Titamax Drill 2.8
Pilot 2/3
Titamax Drill 2.0
Initial Drill
Drill sequence
3.75 mm 4.0 mm Optional
62
Externa l Hex
9.0 mm
11.0 mm
13.0 mm
15.0 mm
17.0 mm
109.582
109.583
109.584
109.585
109.586
109.588
109.589
109.590
109.591
109.592
Ø 3.75 Platform (4.1)
Ø 4.0
Platform (4.1)
•Use Digital Driver 0.9mm (104.039) to the
Cover Screw 4.1 mm
117.018
installation of Cover Screw platform 4.1; •Do not exceed torque of 10 N.cm.
Divergent Healings
Ø 4.1
Slim Fit Healings
2.0 mm
3.0 mm
4.0 mm
106.092
106.093
106.094
Ø 4.1
2.0 mm
3.0 mm
4.0 mm
106.190
106.191
106.192
63
Product Characteristics: •Conical implant with External Hex interface; •NeoPoros Surface; •Capture and installation with contra-angle or manual without mount use (reduction of surgical time); •Installation through implant internal hex, increasing the mechanical resistance (when applied elevated torque), preserving the external hex integrity; •Suitable for bones type III and IV and pos-extracting installation; •Cover screw and mount not included; •External Hex with height of 1mm: platform 4.3 and 5.0; •Perforation rotation: 500-800 rpm; •Installation rotation: 30 rpm.
Countersink 5.0 SF
Alvim Drill 5.0
Countersink 4.3
Alvim Drill 4.3
Alvim Drill 3.5
Alvim Drill 2.0
Initial Drill
Drill sequence
4.3 mm 5.0 mm Optional
64
Externa l Hex
10.0 mm
13.0 mm
16.0 mm
109.321
109.322
109.323
109.324
109.325
109.326
Ø 4.3
Ø 5.0
•Use Digital Driver 0.9mm (104.039) to the installation
Cover Screw 4.3 mm 117.006
5.0 mm 117.003
of Cover Screw platform 4.3 and Digital Driver 1.2mm (104.007) to the installation of Cover Screw platform 5.0; •Do not exceed torque of 10 N.cm.
Divergent Healings
Parallel Healings
2.0 mm
3.0 mm
4.0 mm
Ø 4.3
106.140
106.141
106.142
Ø 5.0
106.127
106.128
106.129
Ø 4.3
2.0 mm
3.0 mm
4.0 mm
106.132
106.133
106.134
Slim Fit Healings
Ø 5.0
2.0 mm
3.0 mm
4.0 mm
106.195
106.196
106.197
65
Cortical with Mount
Product Characteristics: •Cylindrical implant with External Hex; •NeoPoros Surface; •Cover screw not included; •Double thread (faster installation and less trauma); •High cutting capacity; •Suitable for bones type I and II in reduced prosthetic spaces (upper lateral incisor and lower incisor); •Prosthetic platform 3.3mm; •External Hex with height of 1mm; •Resistance to the installation torque: 45 N.cm; •Perforation rotation: 800-1200 rpm; •Installation rotation: 30 rpm.
66
Countersink 3.3
Titamax Drill 2.8
Titamax Drill 2.0
Initial Drill
Drill Sequence
9.0 mm
11.0 mm 13.0 mm
15.0 mm
17.0 mm
Ø 3.3
109.140
Cover Screw 3.3 mm
117.001
109.141
109.142
109.143
•Use Digital Driver 0.9mm (104.039) to the installation of Cover Screw platform 4.3; •Do not exceed torque of 10 N.cm.
Divergent Healings
Ø 3.3
109.144
Parallel Healings
2.0 mm
3.0 mm
4.0 mm
106.065
106.066
106.067
Ø 3.3
2.0 mm
3.0 mm
4.0 mm
106.060
106.061
106.062
67
with Mount
Product Characteristics: •Conical implant with External Hex; •NeoPoros Surface; •Cover screw not included; •Suitable for bones type III and IV in reduced prosthetic spaces (upper lateral incisor and lower incisor) and pos-extracting installation; •Prosthetic platform 3.3mm; •External Hex with height of 1mm; •Resistance to the installation torque: 45 N.cm; •Perforation rotation: 500-800 rpm; •Installation rotation: 30 rpm.
Countersink 3.3
Alvim Drill 3.5
Alvim Drill 2.0
Initial Drill
Drill sequence
Optional
68
10.0 mm 13.0 mm 16.0 mm
Ø 3.5 Platform (3.3) 109.217
Cover Screw 3.3 mm
117.001
109.218
109.219
•Use Digital Driver 0.9mm (104.039) for the installation of Cover Screw platform 3.3; •Do not exceed torque of 10 N.cm.
Divergent Healings
Ø 3.3
Parallel Healings
2.0 mm
3.0 mm
4.0 mm
106.065
106.066
106.067
Ø 3.3
2.0 mm
3.0 mm
4.0 mm
106.060
106.061
106.062
69
External Hex
The Slim Fit Line is the Neodent’s innovation for External Hex components, due to its parallel emergent profile which minimizes the bone renoval.
Reduced Osteotomy Get to know the benefits of the SLIM FIT line, and see how certain details can make all the difference: - Facilitates the fitting of the prosthetic component by reducing the interference with the cortical bone; - Preserves the cortical bone plates; - Optimizes installation; - Eases the procedures for soft tissue synthesis (stitching) by increasing the abutment’s conicity. CONVENTIONAL ABUTMENT WITH SF OSTEOTOMY
70
SF ABUTMENT WITH CONVENTIONAL OSTEOTOMY
Less Aggressive Drills For the SLIM FIT line, it is necessary to use the new
CONVENTIONAL OSTEOTOMY
SLIM FIT OSTEOTOMY (LESS BONE REMOVAL)
COUNTERSINK CONVENTIONAL
NEW DRILL COUNTERSINK SLIM FIT
Countersink SF Drill, which has a new shape that reduces the drilling diameter, reducing trauma and preserving the bone tissue.
Soft Tissue Accommodation
Emergent Profile Slim Fit
The SLIM FIT intermediaries provide an excellent accommodation of peri-implant soft tissue, easing the prosthetic procedures in surgical cases with immediate loading and tissue stabilization at long term. Emergent Profile Conventional
71
Demonstrative sequence of
Conical Abutment External Hex
Prosthetic Torque Ratchet Driver
Castabl e
Titanium
CoCr
Castabl e
Titanium
CoCr
Torque Connection 1.2
Conical Abutment Cylinder 4.1
Conical Abutment Cylinder 5.0
Protective Cylinder of Conical Abutment 4.1
Protective Cylinder of Conical Abutment 5.0
Conical Abutment Analogue 4.1
Conical Abutment Analogue 5.0
Conical Abutment Transfer 4.1 Closed Tra y
Conical Abutment Transfer 4.1 Open Tra y
Sequence 4.1 / 4.3 mm
Conical Abutment Transfer 5.0 Closed Tra y
Conical Abutment Transfer 5.0 Open Tra y
Sequence 5.0 mm
•Available in Titanium; •Minimum interocclusal space of 6.1mm on platform 4.1, and 6.7mm on platform 5.0mm, from the mucosa level; Prosthetic Torque Ratchet Driver
•Conicality 15°; •Single screw-retained prosthesis (anti-rotational); •Cylinders with screw; •Slim Fit components, that minimize bone remotion of the Countersink Drill, facilitating the intermediate seating and the tissue accommodation.
Prosthetic Abutment Driver
Torque Connection 1.6mm
20
N.cm
SF Conical Abutment 4.1mm
72
Conical Abutment 4.3mm
Conical Abutment 5.0mm
Slim Fit
Conical Abutment 1 mm
2 mm
3 mm
Ø 4.1
115.192
115.193
115.194
Ø 4.3
115.051
115.052
115.053
Ø 5.0
115.007
115.008
115.009
•Observe corresponding sequence to the component diameter and indicated torque; •For torque, use Prosthetic Abutment Driver (105.009), except for Ø 5.0 Torque Connection 1.6mm (105.006); •To torque control, use Prosthetic Torque Ratchet Driver (104.026).
Protective Cylinder of Conical Abutment Ø 4.1
106.051
Ø 5.0
106.052
•Available in Titanium; •Used to protect the component during the prosthesis construction; •To installation, use Digital Driver 1.2mm (104.007); •Observe the compatible diameter with the prosthetic component.
Conical Abutment Cylinder Castabl e
Conical Abutment Transfer Open Tra y
Closed Tra y
Ø 4.1
108.035
108.075
Ø 5.0
108.025
108.104
•Available in Titanium; •Component with molding function by prosthesis construction; •For open tray or closed tray technique; •Select transfer according to the component to be molded, as prosthetic planning; •Anti-rotational.
Titanium
CoCr
Ø 4.1
118.106
118.107
118.233
Ø 5.0
118.110
118.111
118.253
•Available in: Titanium: provisional prosthesis; CoCr: overcasting; Castable: casting. •Observe the corresponding sequence to the component diameter; •Screw included; •To screw torque, use Torque Conection 1.2mm (105.005); •Observe indicated torque; •To torque control, use Prosthetic Torque Ratchet Driver (104.026); •Anti-rotational.
Cylinder Screw of Conical Abutment
Conical Abutment Analogue Ø 4.1
101.027
Ø 5.0
101.030
•Available in Titanium; •Replica of implant platform or prosthetic component; •For prosthesis construction or prosthetic planning; •Observe compatible diameter with the prosthetic component.
Titanium
Neotorque
Ø 4.1
116.004
116.231
Ø 5.0
116.005
116.232
•Observe indicated torque; •Use Torque Connection 1.2mm (105.005); •To torque control, use Prosthetic Torque Ratchet Driver (104.026).
Neotorque
•Application of a thin pellicle with carbon basis, which promotes low friction coefficient, resulting in preload increase.
73
Demonstrative sequence of
Mini Conical Abutment Angled Mini Conical Abutment External Hex
Prosthetic Torque Ratchet Driver
Castabl e
Titanium
CoCr
Castabl e
Titanium
Nobl e / CoCr
Torque Connection 1.2
Cylinder of Mini Conical Abutment 4.1
Cylinder of Mini Conical Abutment 5.0
Protective Cylinder of Mini Conical Abutment 4.1
Protective Cylinder of Mini Conical Abutment 5.0
Mini Conical Abutment Analogue 4.1
Mini Conical Abutment Analogue 5.0
Closed Tra y Transfer Mini Conical Abutment 4.1
Closed Tra y Transfer Mini Conical Abutment 5.0
Open Tra y Transfer Mini Conical Abutment 4.1
Sequence 3.3 / 4.1 / 4.3 mm
Open Tra y Transfer Mini Conical Abutment 5.0
Sequence 5.0 mm
•Available in Titanium; •Minimum interocclusal space of 4.4mm on platform 4.1, and 4.8mm on platform 5.0mm, from the mucosa level; Prosthetic Torque Ratchet Driver
•Screw-retained and multiple prosthesis (rotational); •Conicality 20°; •Mini Angled Abutment presents 12 positions of fitting; •The cylinders come with Neotorque screw, except the castables, that comes with Titanium screw; •Slim Fit components improve tissue accommodation, installed after using Countersink Drill, which minimizes bone removal.
Torque Connection 1.2 mm
20
32
Prosthetic Abutment Driver
20
Torque Connection 1.6mm
32
N.cm
N.cm
Angl ed Mini
SF Mini Conical
Mini Conical Abutment
SF Mini Conical
Abutment 17 0 and 30 0
Abutment 4.1mm
3.3 mm / 4.3 mm
Abutment 5.0 mm
N.cm
74
Prosthetic Abutment Driver
N.cm
Angled Mini Conical Abutment
Slim Fit
Slim Fit
Mini Conical Abutment 1 mm
2 mm
3 mm
4 mm
Ø 3.3
115.134
115.135
115.136
Ø 4.1
115.187
115.188
115.189
115.190
Ø 4.3
115.054
115.055
115.056
115.057
Ø 5.0
115.197
115.198
115.199
2 mm
3 mm
4 mm
Ø 3.3
115.137
115.138
115.139
Ø 4.1
115.084
115.074
115.075
115.076
115.077
115.078
170 Ø 4.3
•Observe corresponding sequence to the component diameter; •For torque, use Prosthetic Abutment Driver (105.009), except for Ø 5.0 Torque Connection 1.6mm (105.006); •Observe indicated torque; •To torque control, use Prosthetic Torque Ratchet Driver (104.026).
Ø 5.0
115.094 115.095 115.096
Ø 4.1
115.140
115.141
Ø 4.3
115.111
115.112
Ø 5.0
115.143
115.144
300
•Minimum interocclusal space of 5.0mm for 17º and 5.5mm for 30º; •Screw-retained and multiple prosthesis (rotational); •Observe corresponding sequence to the component diameter; •For torque, use Torque Connection 1.2 (105.005); •Observe indicated torque; •To torque control, use Prosthetic Torque Ratchet Driver (104.026).
Mini Conical Abutment Cylinder
Mini Conical Abutment Transfer Open tra y
Closed tra y
Ø 4.1
108.022
108.021
Ø 5.0
108.024
108.023
Short Screw
116.036
Castabl e
Multifunctional
108.068
•Available in Titanium; •Component with molding function to the prosthesis confection; •For Open Tray or Closed Tray technique; •Select the transfer in accordance with the component to be moulded conforming to the planned prosthetics; •Rotational.
101.020
Ø 5.0
101.022
Nobl e
CoCr
118.206
118.209
Ø 4.1
118.112
118.113
Ø 5.0
118.114
118.115
CoCr for welding
118.210
118.240
•Available in: Titanium: provisional prosthesis; CoCr: overcasting; Castable: casting; Noble: gold alloy with high melting range. •Screw included; •Observe the corresponding sequence to the component diameter; •To screw torque, use Torque Conection 1.2mm (105.005); •Observe indicated torque; •To torque control, use Prosthetic Torque Ratchet Driver (104.026); •Rotational for screw-retained multiple elements.
Mini Conical Abutment Analogue Ø 4.1
Titanium
Cylinder Screw of Mini Conical Abutment Titanium Neotorque
•Available in Titanium; •Replica of prosthetic component; •For prosthesis confection or prosthetic planning.
Ø 4.1 Ø 5.0
106.054
Ø 5.0
106.055
•Available in Titanium; •Used to protect the component during the prosthesis construction; •To installation, use Digital Driver 1.2mm (104.007); •Observe the compatible diameter with the prosthetic component.
116.227
116.038
116.228
•Observe indicated torque; •Use Torque Connection 1.2mm (105.005); •To torque control, use Prosthetic Torque Ratchet Driver (104.026).
Protective Cylinder of Mini Conical Abutment Ø 4.1
116.037
Neotorque
•Application of a thin pellicle with carbon basis, which promotes low friction coefficient, resulting in preload increase.
75
Demonstrative sequence of
SF Universal Post External Hex
Ø4.5
Ø4.5
Ø4.5
Universal Post Cylinder
Universal Post Cylinder
Universal Post Cylinder
Alumina
Provisional
Castabl e
Ø4.5
Universal Post Analogue
Ø4.5
Universal Post Transfer
Prosthetic Torque Ratchet Driver
4.5
Torque Connection 1.2
Transmucous
4 ou 6
32
4.1
N.cm Neotorque Screw
•Available in Titanium; •Cemented prosthesis; •The Universal Post can be prepared according to circunstances, and, in this case, the prosthetic sequence can not be used; •Compatible with platform 4.1 and 4.3 External Hex; •Screw not included, for single elements select Neotorque Screw; •Available in two heights of cemented area: 4 or 6mm. 76
SF Universal Post
Hex Screw
Ø 4.1
4 mm
SF Universal Post
Titanium
116.180
116.002
Ø 4.3
1 mm
2 mm
3 mm
114.428
114.429
114.430
114.431
114.432
114.433
•Observe indicated torque; •Use Torque Connection 1.2mm (105.005); •To torque control, use Prosthetic Torque Ratchet Driver (104.026).
Ø 4.5 6 mm
Neotorque
Neotorque
•Application of a thin pellicle with carbon basis, which promotes low friction coefficient, resulting in preload increase.
Universal Post Analogue
6 mm
4 mm
108.044
Ø 4.5
101.040
6 mm
4 mm
Universal Post Transfer
101.041
Ø 4.5
108.045
•Available in polymer; •Component with molding function to prosthesis confection; •For closed tray technique; •Select transfer according to the component to be molded, as prosthetic planning; •Anti-rotational.
•Available in Titanium; •Replica of prosthetic component; •For prosthesis confection or prosthetic planning.
Ø 4.5 108.062
6 mm
Ø 4.5 108.063
•Components Kit of Universal Post line, containing Transfer and Provisional / Castable Cylinders.
6 mm
4 mm
Universal Post Set
4 mm
Universal Post Cylinder Alumina
Castabl e
Provisional
118.188
118.183
118.194
118.189
118.184
118.195
• Available in: Acrylic: provisional prosthesis; Alumina: for “metal free” prosthesis; Castable: casting. • Compatible with all Universal Posts, if not prepared.
77
Demonstrative sequence of
Customizable Post Angled Post External Hex
Prosthetic Torque Ratchet Driver
Torque Connection 1.2
32
32
32
N.cm
N.cm
N.cm
Neotorque Screw 4.1mm
Neotorque Screw 5.0 mm
Titanium Screw
Customizabl e Post 4.1mm
Customizabl e Post 5.0mm
Angl ed Post (17 0 and 30 0 ) 3.3/ 4.1/ 4.3 / 5.0 mm
Implant Analogue 3.3 mm / 4.1 mm / 4.3 mm / 5.0 mm
• Available in Titanium; • Cemented prosthesis; • Angled Post presents 12 positions of fitting, and include Titanium screw; • Customizable Post without screw. It is recommended to use the Neotorque screw.
78
Closed tra y Transfer
Open tra y Transfer
3.3 mm / 4.1 mm / 4.3 mm / 5.0 mm
3.3 mm / 4.1 mm / 4.3 mm / 5.0 mm
Angled Post 2 mm
170
300
3 mm
Ø 3.3
114.025 114.026
114.027
Ø 4.1
114.016
114.017
114.018
Ø 4.3
114.049 114.050
114.051
Ø 5.0
114.071
114.072
114.073
114.009
114.010
Ø 4.1
Customizable Post
4 mm
•Titanium screw included; •To torque, use Torque Connection 1.2mm (105.005); •Observe indicated torque; •To torque control, use Prosthetic Torque Ratchet Driver (104.026); •Anti-rotational.
Ø 4.1 para Ø 5.0
114.029
Ø 4.1 para Ø 6.0
114.030
Ø 5.0 para Ø 6.0
114.035
•To unitary elements, select Neotorque Screw; •Screw not included; •To installation, use Torque Connection 1.2mm (105.005); •Observe indicated torque; •To torque control, use Prosthetic Torque Ratchet Driver (104.026).
Implant Analogue Titanium
Brass
Ø 3.3
101.002
101.001
Ø 4.1
101.004
101.003
Ø 4.3
101.028
101.024
Ø 5.0
101.006
101.005
•Available in Brass and Titanium; •Replica of implant platform; •For prosthesis construction and/or prosthetic planning.
Implant Transfer
Hex Screw
Ø 3.3 Ø 4.1
Neotorque
Titanium
116.188
116.001
116.180
116.002
116.189
116.003
Ø 4.3 Ø 5.0
• Observe indicated torque; • Use Torque Connection 1.2mm (105.005); • To torque control, use Prosthetic Torque Ratchet Driver (104.026).
Neotorque
Rotational
Anti-rotational
Closed tra y
Open tra y
Ø 3.3
108.001
108.006
Ø 4.1
108.003
108.067 (SF)
Ø 4.3
108.029
108.034
Ø 5.0
108.013
108.011
Ø 3.3
108.002
Ø 4.1
108.066 (SF)
Ø 4.3
108.038
Ø 5.0
108.012
•Available in Titanium; •Component with molding function by prosthesis construction; •For open tray or closed tray technique; •Select transfer according to the implant to be molded, as prosthetic planning.
•Application of a thin pellicle with carbon basis, which promotes low friction coefficient, resulting in preload increase.
79
Demonstrative sequence of
UCLA External Hex
Prosthetic Torque Ratchet Driver
Torque Connection 1.2
32
N.cm Neotorque Screw
UCLA 3.3 mm
UCLA 4.1 mm
UCLA 4.3 mm
UCLA 5.0 mm
Analogue 3.3 mm
Analogue 4.1 mm
Analogue 4.3 mm
Analogue 5.0 mm
•Prosthetic component directly over the implant hex; •For screw-retained or cemented prosthesis; •Available in Rotational or Anti-Rotational; - Tilite and CoCr: overcastting; - Castable: casting; - Titanium: Provisional or Cemented Prosthesis - Gold: Overcasting with high melting range leagues. •With Titanium and Neotorque screw; •For unitary elements, select Neotorque screw.
80
Closed Tra y Transfer
Open Tra y Transfer
3.3 mm / 4.1 mm / 4.3 mm / 5.0 mm
3.3 mm / 4.1 mm / 4.3 mm / 5.0 mm
UCLA
Rotational
Anti-rotational
Cobalt-Chromium (Cocr)
Ø 3.3
118.212
Ø 4.1
Castabl e
Titanium
118.001
118.008
118.004
118.009
118.101
118.097 118.040
Nobl e
118.204
118.235
Ø 4.3 Ø 5.0
118.237
118.006
Ø 3.3
118.211
118.002
Ø 4.1
118.005
118.030
118.119
118.152
118.205
118.234
Ø 4.3 Ø 5.0
118.236
118.007
Hex Screw Neotorque
Ø 3.3 Implant Transfer
Rotational
Anti-rotational
Closed Tra y
Ø 3.3
108.001
Ø 4.1
108.003
Ø 4.3
108.029
Ø 5.0
108.013
Ø 3.3
108.002
Ø 4.1
108.066 (SF)
Ø 4.3
108.038
Ø 5.0
108.012
Open Tra y
108.006 108.067 (SF)
Ø 4.1
Titanium
116.188
116.001
116.180
116.002
116.189
116.003
Ø 4.3 Ø 5.0
108.034
•Observe indicated torque; •Use Torque Connection 1.2mm (105.005); •To torque control, use Prosthetic Torque Ratchet Driver (104.026).
108.011
Neotorque
•Application of a thin pellicle with carbon basis, which promotes low friction coefficient, resulting in preload increase.
•Available in Titanium; •Component with molding function by prosthesis construction; •For open tray or closed tray technique; •Select transfer according to the implant to be molded, as prosthetic planning.
Implant Analogue Titanium
Brass
Ø 3.3
101.002
101.001
Ø 4.1
101.004
101.003
Ø 4.3
101.028
101.024
Ø 5.0
101.006
101.005
•Available in Brass and Titanium; •Replica of implant platform; •For prosthesis construction and/or prosthetic planning.
81
Demonstrative sequence of
Mini Ball Attachment External Hex
O’ring with Cylinder
Protection Disk
Straight positioner
Positioner 70
Positioner 14 0
Prosthetic Torque Ratchet Driver
Prosthetic Abutment Driver
Protection Disk
Positioner
•Available in Titanium; •Application of Nitride Titanium coating to increase the wear resistance; •Directly over the implant; •It´s recommended capture the components in patient’s mouth, one by one; •O’ring with protection disc; •See the demonstrative sequence of Mini Ball Attachment on page 126.
82
32
N.cm Mini Ball Attachment 4.1
Mini Ball Attachment 4.3
Mini Ball Attachment 5.0
Castable Ball Attachment
Mini Ball Attachment 2 mm
3 mm
4 mm
Ø 4.1
102.060 102.061
Ø 4.3
102.063 102.064 102.065
Ø 5.0
102.066 102.067 102.068
102.062
102.078
•Casting in various metals; •May be cemented in natural roots or waxed in bars for overdenture retention.
•Select according to mucosa height; •To installation, use Prosthetic Abutment Driver (105.009); •Observe indicated torque; •To torque control, use Prosthetic Torque Ratchet Driver (104.026).
Positioners straight, 70 and 140
102.076
•Available in polymer; •Defines the correct distance between Attachment Ball and O’ring; •Corrects the parallelism between implants; •Essential for O’ring capturing.
O’ring with Cylinder 102.073
•Available in Titanium (cylinder); •Available in polymer (O’ring); •Positioned at the overdenture prosthesis base, has the function of Attachment Ball retention; •Not autoclavable.
Mini O’ring 102.075
•Available in polymer; •Positioned at the overdenture prosthesis base, has the function of Attachment Ball retention; •Not autoclavable.
Protection Disk 102.077
•Package with 10 units.
O’ring Remover 104.044
•Digital Driver with function of O’ring replacing to the cylinder.
O’ring Mount 104.043
•Digital Driver with function of O’ring placement to the cylinder.
83