FITTING INSTRUCTION FOR LEDGE / DIVE PUSH BUTTON CABINET PULL c/w SPRUNG LATCH & STOP / KEEP
1 Fix Strike Plate (1) into door frame. Position required is thickness of the door plus 8mm into frame. Select height required for pull and mark 2 pilot holes at 35mm centres.
Fig. 1
2 Drill pilot holes 2.5mm diameter x 6.0 deep and fit latch keep using 2 x No 8 x 1” wood screws
x
provided.
3 Mark vertical line on door 20mm in from edge at height required.
X = door thickness + 8mm
4 Mark centre hole on door to line up with centre of latch.
5 Mark 2 holes, above and below centre hole at 27mm centres. 1
6 Drill centre hole 11.5mm diameter squarely through door. Carefully avoid splintering on door.
7 Drill 2 holes above and below 5.0mm diameter squarely through door to avoid splintering. 4 3
8 Cut thread length on spring latch as shown in Fig. 1 (e.g. if door is 19mm thick ‘x’ should be cut to 27mm). Push button should protrude 6mm when assembled.
2 DOOR THICKNESS PLUS 8mm
9 Fit push button (4) to spring latch (2) and secure parts (2) and (3) through door using 2 x M4 x 30 countersunk screws provided. FIXINGS SUPPLIED
FIXINGS LIST (A) (B)
2 of #8 x 1” wood screws 2 of M4 x 30mm c/sk screws
CONTACT
B A
T : +44 (0)1271 325 325 E : sales@turnstyledesigns.com
PART NUMBER : 35701
W : www.turnstyledesigns.com
Turnstyle Designs Ltd, Baron Way, Roundswell Business Park, Barnstaple, Devon, EX31 3TB, United Kingdom