Designer's Choice D type Coverplate EJs DzD: Revolutionary design combines slim visual width, low profile, and hidden fixings. This floor coverplate system is designed for use in polished concrete, roll-coat epoxy, tiles, vinyl and other floor finishes. Low profile and slender width allows for minimal substrate rebating. Leaves no visual grout line when applied to polish or trowel-finished concrete. Suitable for high-end retail/commercial fit-outs with rebating constraints. Stadiums, transit-centres and other buildings with suspended-slab or slab-on-ground concrete.
Dz D Previous Model No: UADJ
Performance Concealed Fixings Low profile / Retrofit High Capacity Low Maintenance Bead blasted cover plate Slip resistance Class V Tested to AS4586 2013
Compatible Finishes Tiles Vinyl Carpet Epoxy Exposed Concrete
Standard Length 4.8m
Standard Finish Anodised
Options
No bump option:
Product Dz100D Dz120D Dz165D Dz220D Dz45DW Dz115DNB
A: Coverplate Width Thick 100 4 120 5 165 5 220 6 45 3 115 4
Min. 6 16 61 128 0 21
B: Gap Mid. Max. 48 90 63 110 108 155 223 318 19 38 69 116
Mvmt. 84 94 94 190 38 95
Min. 122 132 177 244 60 125
C: Exposed Width Mid. 164 179 224 339 79 173
Max. 206 226 271 434 98 220
Block Out: 43D x 9E x 15F x 10G Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Designer's Choice FTAq type Waterproof Carparks Stadium EJ DzFTAq: A high-movement polyethylene foam waterseal with pedestrian friendly rubber tread-piece. The specially formulated, highly flexible polyethylene foam is simple to install.. including welding of junctions and upturns. This results in a 100% waterproof seal. Negates the use of surface-mount plates which present trip-hazards, work loose, and become noisy. Ideal for stadium-plats and roof-top carparks. (see also Aquo)
Dz FTAq Previous Model No: Uniseal PB/AR
Performance UV stable High movement range 100% waterproof seal Pedestrian friendly support for High Heels Shopping Trolley
Compatible Finishes Epoxy Exposed Concrete
Standard Length Cut to size
Options
A: Seal Product Dz30FTAq Dz40FTAq Dz50FTAq Dz60FTAq Dz70FTAq Dz80FTAq Dz90FTAq Dz100FTAq Dz110FTAq Dz120FTAq Dz130FTAq Dz140FTAq Dz150FTAq
B: Gap
Width
Thick
Min.
Mid.
Max.
30 40 50 60 70 80 90 100 110 120 130 140 150
40 40 50 50 50 50 50 50 50 50 90 90 90
12 16 20 24 28 32 36 40 44 48 52 56 60
25 33 43 51 60 68 77 85 94 102 111 119 128
38 50 65 78 91 104 117 130 143 156 169 182 195
Length per Length per 8lt C: Installation 1.5lt Flextread Kit Gap Mvmt. Adhesive Kit (10mm Depth) 26 23 9.0 31.6 34 30 9.0 24.2 45 38 7.5 19.1 54 45 7.5 16.2 63 53 7.5 13.7 72 60 7.5 12.1 81 68 7.5 10.7 90 75 7.5 9.7 99 83 7.5 8.8 108 90 7.5 8.1 117 98 4.5 7.4 126 105 4.5 6.9 135 113 4.5 6.4
Disclaimer: Dz FTAq flex-tread is a semi-rigid rubber compound applied to the surface of AqP water seal. It is designed to provide flush mount support for shopping trolley, passenger vehicle and pedestrian traffic. Dz FTAq flex-tread does not have the flexibility of the AqP installed below it, and therefore may crack during movement. This does not affect performance of Dz FTAq flex-tread, or the AqP water seal below it. All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.3 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Designer's Choice MF type Coverplate EJs DzMF: A 2 piece expansion joint cover system. It is intended for slab-on-ground applications. The DzMF is widely used in supermarkets & department stores. It has a 3mm edge height for integration with vinyl/vinyl tiles, but can be packed or installed in rebates to allow for ceramic tiles or polished concrete floor finishes. DzMF is purpose designed for flush mounting which overcomes the horizontal impact issues of surface-mount systems.
Dz MF Previous Model No: UAFM
Performance Low profile / Retrofit Flush mount Smooth transition
Compatible Finishes Ceramic Tiles Vinyl Vinyl Tiles Polished Concrete
Standard Length 3.6m
Standard Finish Anodised Aluminium
Options
Product Dz MF
A: Coverplate A1 Width A2 Width Thick 86 46 3-4
Min. 0
B: Gap Mid. Max. 9 17
Mvmt. 17
C: Exposed Width Min. Mid. Max. 111 120 128
Block Out: 115D x 3E Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Designer's Choice T type Coverplate EJs DzT: This coverplate system is designed to house floor-finishes up to 16mm thick. The installed system presents minimal visual impact. Traditional recessed-coverplate EJ systems are quite deep and wide. They need large concrete rebates which can be difficult to achieve. DzT requires a substantially smaller concrete recess. It can house a range of floor finishes, and accommodates substantial movement. Suitable applications are tiles, terrazite, vinyl, carpet and epoxy floors‌.. in buildings such as convention centres, shopping malls, airport terminals, hotels, museums. The system is supplied assembled.
Dz T Previous Model No: UADT
Performance Thermal & shrinkage movement Concealed fixings Minimum visual impact High Capacity
Compatible Finishes Tiles Vinyl Carpet Epoxy Terrazite
Standard Length 4.8m
Standard Finish Mill Finish
Options
Product Dz140T
A: Coverplate Width 140
Min. 12
B: Gap Mid. Max. 53 93
Mvmt. 81
C: Exposed Width Min. Mid. Max. 156 197 237
Block Out: 62D x 27E x 12F x 12G Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.2 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Flexo C Coverplate EJs FxC: The most widely used floor coverplate expansion joint system. FxC is used in retail centres, supermarket and department–store trading floors, airports terminals, apartment developments, public buildings etc. Offering multi-directional movement, and composite c-bars, it is compatible with most floor finishes. Coverplate available in Stainless Steel, Bead-blasted Aluminium, Natural or Colour Anodised Aluminium.
Fx C Previous Model No: UAC
Performance Concealed Fixings Thermally Dynamic High Capacity Low Maintenance Bead blasted cover plate Slip resistance Class V Tested to AS4586 2013
Compatible Finishes Tiles Vinyl Carpet Epoxy
Standard Length 4.8m
Standard Finish Anodised Aluminium
Options
No bump option:
A: Coverplate Product Width Thick Min. Fx50C 50 3 6 Fx70C 70 3 6 Fx100C 100 4 35 Fx45CW 50 3 27 Fx75CW 75 3 47 Fx75CNB 75 3 7 Fx110CNB 110 5 32 Fx CS Stainless Steel Model Available
B: Gap Mid. Max. 21 35 33 60 61 86 41 54 61 74 34 61 64 96
Mvmt. 29 54 51 27 27 54 64
C: Exposed Width Min. Mid. Max. 63 78 92 82 109 136 111 137 162 56 70 83 81 95 108 87 114 141 112 144 176
Block Out: 90D x 35E
Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Flexo CT Coverplate EJs FxCT: Developed from the FxC range which is the most widely used floor coverplate expansion joint system. FxCT is suited for integration with deep floor finishes such as terrazzo, pavers, marble, granite and other stone-tiles. FxCT can be supplied with coverplates finished in stainless steel, natural and colour anodised aluminium, or bead-blasted. It is used in retail centres, airports terminals, apartment developments, public buildings etc.
Fx CT Previous Model No: UAC T
Performance Concealed Fixings Thermally Dynamic High Capacity Low Maintenance Bead blasted cover plate Slip resistance Class V Tested to AS4586 2013
Compatible Finishes Tiles / Paver / Terrazzo Exposed Aggregate / Stone / Granite
Standard Length 4.8m
Standard Finish Anodised Aluminium
Options
No bump option:
A: Coverplate Product Width Thick Fx50CT Small 50 3 Fx50CT Medium 50 3 Fx50CT Large 50 3 Fx70CT Small 70 3 Fx70CT Medium 70 3 Fx70CT Large 70 3 Fx100CT Small 100 3 Fx100CT Medium 100 3 Fx100CT Large 100 3 Fx165CT Small 165 5 Fx165CT Medium 165 5 Fx165CT Large 165 5 Fx CTS Stainless Steel Model Available
Min. 6 6 6 6 6 6 36 36 36 101 101 101
B: Gap Mid. Max. 21 35 21 35 21 35 36 60 36 60 36 60 81 90 81 90 81 90 178 153 178 153 178 153
Mvmt. 29 29 29 54 54 54 54 54 54 52 52 52
C: Exposed Width Min. Mid. Max. 63 78 92 63 78 92 63 78 92 82 109 136 82 109 136 82 109 136 111 138 165 111 138 165 111 138 165 177 203 229 177 203 229 177 203 229
E: Depth 36 51 71 36 51 71 36 51 71 36 51 71
Block Out: 80D x E Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and Rev.1 capabilities. Thiscapabilities. data sheet produced 17.03.2015. Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Flexo D Coverplate EJs FxD: Low profile, floor coverplate system designed for retrofit, or where substrate rebating has minimal requirement. A widely used, versatile system, suitable for refurbishments and new-to-old slab jointing. The FxD can also be specified in works where substrate rebate specification is an unknown factor. FxD can be supplied with coverplates finished in stainless steel, natural and colour anodised aluminium, or bead-blasted. Is used in retail buildings, supermarkets and department stores, mixed-use developments, public and other buildings.
Fx D Previous Model No: UAD
Performance Concealed Fixings Low profile / Retrofit High Capacity Low Maintenance Bead blasted cover plate Slip resistance Class V Tested to AS4586 2013
Compatible Finishes Tiles Vinyl Carpet Epoxy Concrete
Standard Length 4.8m
Standard Finish Anodised Aluminium
Options
No bump option:
A: Coverplate Product Width Thick Fx70D 70 3 Fx100D 100 4 Fx80DNB 80 3 Fx110DNB 110 4 Fx DS Stainless Steel Model Available
Min. 6 30 6 38
B: Gap Mid. Max. 33 59 57 83 33 59 68 97
Mvmt. 53 53 53 59
C: Exposed Width Min. Mid. Max. 116 143 169 141 168 194 116 143 169 148 178 207
Block Out: 55D x 19E Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.2 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Flexo CH Coverplate EJs FxCH: A heavy duty architectural floor coverplate system designed for use with heavy pedestrian, and infrequent service-equipment traffic. Suitable for use in concourse areas such as stadiums, convention centres, airport terminals. FxCH can be supplied with coverplates finished in natural and colour anodised aluminium, or bead-blasted. There is also an optional “T� bracket modification, for use in exposed agg, terrazzo, stone or paving.
Fx CH Previous Model No: UAC HD
Performance Heavy duty Concealed Fixings High Capacity Low Maintenance Bead blasted cover plate Slip resistance Class V Tested to AS4586 2013
Compatible Finishes Tiles Vinyl Epoxy
Standard Length 4.8m
Standard Finish Anodised Aluminium
Options
"T" Bracket option:
Product Fx130CH Fx165CH Fx220CH
A: Coverplate Width Thick 130 6 165 5 220 6
Min. 6 41 96
B: Gap Mid. Max. 60 114 95 149 150 204
Mvmt. 108 108 108
C: Exposed Width Min. Mid. Max. 170 224 278 205 259 313 260 314 368
Block Out: 120D x 40E
Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Brawny Coverplate EJs By C: An Extra Heavy Duty floor coverplate system designed for use with heavy rolling traffic such as forklifts, pallet trolleys, scissor-lifts. Suitable for use in loading docks, back of house areas, bulky-goods retail trading-floors. Unique square-edge design minimises wheel impact, which promotes longevity. Accommodates multi-directional movement. By C is normally supplied with high grade mill-finish alloy coverplates. But can be supplied with stainless steel, natural and colour-anodised aluminium, or bead-blasted coverplate. There is also an optional “T” bracket modification, for use in exposed agg, terrazzo, stone or paving.
By C Previous Model No: UAC EHD
Performance Extra heavy duty Concealed Fixings High Capacity Bead blasted cover plate Slip resistance Class V Tested to AS4586 2013
Compatible Finishes Tiles Vinyl Epoxy Concrete
Standard Length 4.8m
Standard Finish
Anodised Aluminium Base Mill finish Coverplate
Options
T brackets for paving
"T" Bracket option:
Product By110C By140C By160C
A: Coverplate Width Thick 110 6 140 6 160 8
Min. 8 38 58
B: Gap Mid. Max. 49 89 79 119 99 139
Mvmt. 81 81 81
C: Exposed Width Min. Mid. Max. 120 161 201 150 191 231 170 211 251
Vertical Movement ±15 ±15 ±15
Block Out: 100D x 40E Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.3 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Brawny Coverplate EJs By SM: The BySM is an innovative carpark coverplate system which offers multi-directional movement including ‘differential-vertical’. The BySM is designed as a platform over the AquoP(Uniseal PB) EJ system. AqP(UPB) has been in use for 12 years, and has successfully waterproofed kilometers of multistory carpark EJs including critical waterproofing of expansion joints in roof-tops & carparks. Alternatively BySM can be integrated with the AquoH(Uniseal HP) waterproofing EJ system. It is supplied in surface mounted (BySM HD), or flush mounted (ByFM HD) sections. A unique system which overcomes issues associated with weight transfer from one slab to another.
By SM Previous Model No: UASM HD
Performance Horizontal & Vertical Movement Surface mounted High Capacity
Compatible Finishes Epoxy Concrete Polished/Burnished Concrete
Standard Length 4.8m
Standard Finish
*AqP(Uniseal PB) not included.
Mill finish
Options
Product By350SM HD By440SM HD By350FM HD By440FM HD
A: Coverplate Width Thick 50 6 140 6 50 6 140 6
Min. 0 65 0 65
Mid. 35 100 35 100
B: Gap Max. Mvmt. Vert. Mvmt. 70 70 10 135 70 10 70 70 10 135 70 10
C: Exposed Width Min. Mid. Max. 320 355 390 410 445 480 295 330 365 385 420 455
Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Brawny B1 Bridge Joint ByB1: A bridge expansion joint for transport infrastructures which experience heavy duty traffic. Designed-for, and used in some Queensland motorways. The ByB1 type expansion joints do not have current RTA approval. Flat wearing surface provide smooth and bump-free transition for all types of traffics. ByB1 is a retro-fit type BJ, installed after cutting existing bitumen recess.
By B1 Previous Model No: UBJ 1
Performance Extra heavy duty Concealed Fixings Retrofit High Capacity
Compatible Finishes Asphalt Epoxy Exposed Concrete
Standard Length 6.0m
Standard Finish Mill Finish
Options
Product ByB1 Drape Seal ByB1 Flush Seal
A: Retainer Width Thick 104 50 104 50
Min. 12 27
B: Gap Mid. Max. 75 137 82 137
Mvmt. 125 110
C: Exposed Width Min. Mid. Max. 208 271 333 223 278 333
Block Out: 120D x 55E Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Brawny B2 Bridge Joint ByB2: A bridge expansion joint for transport infrastructures which experience heavy duty traffic. Designed-for, and used in some Queensland motorways. The ByB2 type expansion joints do not have current Australian RTA approval. Flat wearing surface provide smooth and bump-free transition for all types of traffics. ByB2 is a cast-in-situ type BJ, installed before concrete is poured.
By B2 Previous Model No: UBJ 2
Performance Extra heavy duty Cast-in High Capacity
Compatible Finishes Asphalt Epoxy Exposed Concrete
Standard Length 6.0m
Standard Finish Mill Finish
Options
Product ByB2 Drape Seal ByB2 Flush Seal
A: Retainer Width Thick 93 46 93 46
Min. 12 27
B: Gap Mid. Max. 75 137 82 137
Mvmt. 125 110
C: Exposed Width Min. Mid. Max. 186 249 311 201 256 311
Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Morpho L Thermoplastic Seal EJs MoL: The seal is purposely designed with smooth ripples to allow the seal to open, rather than stretch & break. Floor seal system designed for hospital, food preparation areas, laboratories, cleaners rooms or wherever hygiene is imperative. The Morpho seal is made from dual-compound thermoplastic with UV inhibitors. Colour options are available for minimum quantity production runs. Mo L is lower profile design.
Mo L Previous Model No: UAST LP
Performance Architectural floor seal Santoprene primary seal Weather / Anti-pathogenic seal UV stable No bump transition
Compatible Finishes Tiles Vinyl Carpet Epoxy
Standard Length 4.8m
Standard Finish Anodised
Colour Option
Black Grey Beige Other colour options available
Options
Anti-bacteria installation solution
Product Mo35L Mo50L Mo75L Mo50DL
A: Seal Width Thick 35 19 50 19 75 19 50x2 19
Min. 49 56 75 98
B: Gap Mid. Max. 52 55 63 70 87 99 112 126
Mvmt. 6 14 24 28
C: Exposed Width Min. Mid. Max. 35 38 41 42 49 56 61 73 85 84 98 112
Block Out: 90D x 35E Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Morpho T Thermoplastic Seal EJs MoT: The seal is purposely designed with smooth ripples to allow the seal to open, rather than stretch & break. Floor seal system designed for hospital, food preparation areas, laboratories, cleaners rooms or wherever hygiene is imperative. The MoT seal is made from dual-compound thermoplastic with UV inhibitors. Colour options are available for minimum quantity production runs.
Mo T Previous Model No: UAST
Performance Architectural floor seal Santoprene primary seal Weather / Anti-pathogenic seal UV stable No bump transition
Compatible Finishes Tiles Epoxy Stone / Granite Terrazite
Standard Length 4.8m
Standard Finish Anodised
Colour Option
Black Grey Beige Other colour options available
Options
Anti-bacteria installation solution
Product Mo35T Mo50T Mo75T Mo50DT
A: Seal Width Thick 35 19 50 19 75 19 50x2 19
Min. 49 56 75 98
B: Gap Mid. Max. 52 55 63 70 87 99 112 126
Mvmt. 6 14 24 28
C: Exposed Width Min. Mid. Max. 35 38 41 42 49 56 61 73 85 84 98 112
Block Out: 45D x 48E Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Neo A Control Joints NeA: Control joints are designed to accommodate the difference in thermal movement between hard floor-finishes and (concrete) substrate. Known as the coefficient of expansion….this difference means that Ne A Control Joints are set out in a grid pattern throughout the hard floor, and according to Australian and International building standards. Control Joints are not used over movement gaps. Ne A, flanged control joints, can be supplied using the following angle trim types: Stainless Steel, alloy, brass……. Neoprene is in the following colours: Black, grey, off-white.
Ne A Previous Model No: UCJA
Performance Control Joint for hard floor finishes Custom made to order
Compatible Finishes Tiles Granite Terrazzo Marble
Standard Length Aluminium: 3.6m Stainless Steel: 1.8m Brass: 3.6m
Colour Option Black Grey Off-white
Product Ne10/6A Ne10/12A Ne12/6A Ne12/12A Ne15/6A Ne15/12A Ne20/6A Ne20/12A Ne22/6A Ne22/12A Ne25/6A Ne25/12A
A: Seal 6 12 6 12 6 12 6 12 6 12 6 12
B: Exposed Width 11.2 17.2 11.2 17.2 11.2 17.2 11.2 17.2 11.2 17.2 11.2 17.2
C: Depth 10 10 12 12 15 15 20 20 22 22 25 25
Movement 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10%
Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Thiscapabilities. data sheet produced 17.03.2015. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Neo Control Joints Ne: Control joints are designed to accommodate the difference in thermal movement between hard floor-finishes and (concrete) substrate. Known as the coefficient of expansion….this difference means that Ne Control Joints are set out in a grid pattern throughout the hard floor, and according to Australian and International building standards. Control Joints are not used over movement gaps. Ne straight control joints, can be supplied using the following sheet-metal types: Stainless Steel, alloy, zinc, brass…….and neoprene in the following colours: Black, grey, off-white.
Ne Previous Model No: UCJ
Performance Control Joint for hard floor finishes Custom made to order
Compatible Finishes Tiles Terrazzo Paving Stone
Standard Length Aluminium: 1.8m Stainless Steel: 1.8m Zinc: 1.8m Brass: 2.0m
Colour Option Black Grey Off-white
Tail option:
Loop option:
Turn over for dimension table Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Thiscapabilities. data sheet produced 17.03.2015. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Neo Control Joints Continue from last page
Ne Previous Model No: UCJ
Product Ne22/6 Aluminium Ne22/12 Aluminium Ne31/6 Aluminium Ne31/12 Aluminium Ne40/6 Aluminium Ne40/12 Aluminium Ne50/6 Aluminium Ne50/12 Aluminium Ne22/6 Stainless Steel Ne22/12 Stainless Steel Ne31/6 Stainless Steel Ne31/12 Stainless Steel Ne40/6 Stainless Steel Ne40/12 Stainless Steel Ne50/6 Stainless Steel Ne50/12 Stainless Steel Ne22/6 Zinc Ne22/12 Zinc Ne31/6 Zinc Ne31/12 Zinc Ne40/6 Zinc Ne40/12 Zinc Ne50/6 Zinc Ne50/12 Zinc Ne22/6 Brass Ne22/12 Brass Ne31/6 Brass Ne31/12 Brass Ne40/6 Brass Ne40/12 Brass Ne50/6 Brass Ne50/12 Brass
A: Seal 6 12 6 12 6 12 6 12 6 12 6 12 6 12 6 12 6 12 6 12 6 12 6 12 6 12 6 12 6 12 6 12
B: Exposed Width 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.4 8.4 8.4 8.4 8.4 8.4 8.4 8.4
C: Depth 22 22 31 31 40 40 50 50 22 22 31 31 40 40 50 50 22 22 31 31 40 40 50 50 22 22 31 31 40 40 50 50
Movement 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10%
Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Thiscapabilities. data sheet produced 17.03.2015. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Vertos P Coverplate EJs for Walls VtP: The VtP is a coverplate-type wall expansion joint system. It is designed to be integrated with finishes such as plasterboard, render, aluminium-panel, and others. VtP can be installed in walls or ceilings internally or externally. Where structural movement joints are designed into corners, obtuse or acute angles can be accommodated. The system has adequate seismic function. It has an optional PVC gland for external applications. VtP can be powder-coated to a colour option, or supplied in a stainless-steel finish.
Vt P Previous Model No: UP
Performance Concealed fixings Seismic movement Colour range available
Standard Length 3.6m
Standard Finish Anodised Aluminium
Cover Plates
Options
Product Vt130P Vt150P Vt180P Vt220P Vt90PN
A: Coverplate Width Thick 130 1.6 150 1.6 180 1.6 220 1.6 90 1.6
Min. 10 30 60 100 32
B: Gap Mid. Max. 65 120 85 140 115 170 155 210 57 82
Mvmt. 110 110 110 110 50
Min. 152 172 202 242 112
C: Exposed Width Mid. 165 205 205 297 137
Max. 262 282 312 352 162
Block Out: 70D x 18E (40D x 18E for Vt PN) Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.2 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Vertos S Thermoplastic Seal EJs for Walls Vt S
VtS: Wall to wall expansion joint system uses a combination of extruded-aluminium retainers, and extruded thermoplastic cover. The Vt S has high movement with seismic capability. Can be integrated with most wall finishes. A secondary PVC seal is used for external applications. Vt S spitter-boots can be supplied as an accessory for drainage. Thermoplastic colour options are available, and the system can be adapted for wall- corner use (VtSJ).
Previous Model No: UASF
Performance Facade Joint Santoprene primary seal Optional secondary waterproof seal UV stable Colour range available
Standard Length 4.8m
Standard Finish Anodised Aluminium
Colour Options
Black Grey Beige Other colour options available
Options
Wall/Corner Installation
Wall/Corner Installation:
Product Vt50S Vt75S Vt100S Vt150S Vt225S Vt300S
A: Seal Width Thick 50 2.5 75 2.5 100 2.5 75x2 2.5 100x2 2.5 75x4 2.5
Min. 30 30 30 60 60 60
B: Gap Mid. Max. 53 75 73 115 120 210 145 230 240 420 230 400
Mvmt. 45 85 180 170 360 340
C: Exposed Width Min. Mid. Max. 30 53 75 30 73 115 30 120 210 60 145 230 60 240 420 60 230 400
Block Out: 68D Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Vertos C Thermoplastic Seal EJs for Ceilings Vt C
VtC: Ceiling to ceiling expansion joint system uses a combination of extruded-aluminium retainers, and extruded thermoplastic cover. The VtC has high movement with seismic capability. Can be integrated with most ceiling finishes. Thermoplastic colour options are available, and the system can be adapted for ceiling to wall use (VtCW).
Previous Model No: UCW
Performance Ceiling Joint Santoprene primary seal Optional secondary waterproof seal UV stable Colour range available
Standard Length 4.8m
Standard Finish Anodised Aluminium
Colour Options
Black Grey Beige Other colour options available
Options
Product Vt50C Vt75C Vt100C Vt150C Vt225C
A: Seal Width Thick 50 2.5 75 2.5 100 2.5 75x2 2.5 100x2 2.5
Min. 30 30 30 60 60
B: Gap Mid. Max. 53 75 73 115 120 210 145 230 240 420
Mvmt. 45 85 180 170 360
C: Exposed Width Min. Mid. Max. 30 53 75 30 73 115 30 120 210 60 145 230 60 240 420
Block Out: 40D Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Thiscapabilities. data sheet produced 17.03.2015. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Pyrotx I Fire Seals for EJs PyI: High-movement firesealing system. PyI is very simply installed by insertion into masonry floors and walls. The range of sizes are suitable for gaps 20mm to 100m. The system is tested/certified to AS 1530.4 and BS476. PyI has seismic capability, and can be used in conjunction with most Unison coverplates and waterseal systems.
Py I Previous Model No: UFI
Performance Expansion Joint Fireseal High fire resistance High movement capacity Certified to 250mm gaps Floor application Wall application on both sides Compatible with coverplates & water seals Structural/Thermal/Seismic movements 2/4 hours fire rating Tested and comply with: AS 1530.4 AS 4072.1 BS 476.20
*Coverplate for illustration purpose. Not included
Standard Length 1.2m
Product Py25I - 2hrs Py35I - 2hrs Py35I - 4hrs Py50I - 2hrs Py50I - 4hrs Py75I - 2hrs Py75I - 4hrs Py100I - 2hrs Py100I - 4hrs
A: Seal Width Depth 32 35 38 50 38 75 64 66 64 91 100 91 100 91 126 116 126 116
Min. 10 15 15 18 18 29 29 34 34
B: Gap Mid. Max. 20 30 25 35 25 35 34 50 34 50 52 75 52 75 71 100 71 100
Mvmt. 20 20 20 32 32 46 46 66 66
C: Min. Installation Width 10 15 15 18 18 35 35 45 45
Disclaimer: All All design design rights rights reserved. reserved. Design Design and and specifications specifications are are subject subject to to change change without without notice. notice. The The manufacturer manufacturer does does not not accept accept liability liability where where the the material material Disclaimer: on these these pages pages is is misconceived, misconceived, exploited, exploited, or or lacks lacks conformity. conformity. The The intention intention of of this this information information is is to to provide provide aa reasonable reasonable description description of of products, products, procedures procedures and and on capabilities. Thiscapabilities. data sheet Rev.2 produced 17.03.2015. Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Pyrotx B Fire Blankets for EJs PyB: Designed to accommodate seismic activity, PyB is a very high movement fire-blanket system. The PyB is tested/certified to Australian and British standards for gaps of 250mm‌. with movement well in excess of this. PyB can be used in walls and floors, and can be applied in conjunction with a range of Unison coverplate systems.
Py B Previous Model No: UFB
Performance Expansion Joint Fireseal High fire resistance High movement capacity Certified to 250mm gaps Floor application Wall application on both sides Compatible with coverplates & water seals Tested and comply with: AS 1530.4 AS 4072.1 BS 476.20 *Coverplate for illustration purpose. Not included
Standard Length 7.3m
Product Py25/300B Py25/400B Py25/600B
A: Seal Width Thick 300 25 400 25 600 25
Min. 50 50 50
B: Gap Mid. Max. 113 175 163 275 263 475
C: Installation Width Mvmt. 125 225 425
70 70 70
Block Out: 200D Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Thiscapabilities. data sheet produced 17.03.2015. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
SeiMax T Coverplate EJs SiT: An architectural floor expansion joint system. It has a deep ‘pan’ type coverplate to suit thick floor finishes such as terrazzo, granite, stone etc. The caulked edges split thermal movement in two, and minimise visual presence. SiT accommodates multi-directional and seismic movement. The system is finished in natural anodised alloy. The SiT is supplied fully assembled, including caulked edges for fast & simple installation. Suitable for use in commercial and government buildings such as shopping malls, airport terminals, convention and exhibition centres, hospitals.
Si T Previous Model No: SUACT
Performance Thermal & seismic movement Concealed fixings Minimum visual impact High Capacity
Compatible Finishes Tiles Vinyl Stone Epoxy Terrazzo Exposed Concrete
Standard Length 4.8m
Standard Finish Anodised Aluminium
Options
Product Si170T Si270T Si370T
A: Coverplate Width 170 270 370
Min. 90 190 290
B: Gap Mid. Max. 102 114 202 214 302 314
Mvmt. 24 24 24
C: Exposed Width Min. Mid. Max. 288 300 312 388 400 412 488 500 512
Seismic Movement 78 112 262
Block Out: 120D x 60E Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
SeiMax G Coverplate EJs SiG: An architectural floor expansion joint system. It has a deep ‘pan’ type coverplate to suit thick floor finishes such as terrazzo, granite, stone etc. SiG accommodates multi-directional and seismic movement. The system is finished in natural anodised alloy. Suitable for use in commercial and government buildings such as shopping malls, airport terminals, convention and exhibition centres.
Si G Previous Model No: GBR
Performance Thermal & seismic movement Concealed fixings High Capacity Low Maintenance
Compatible Finishes Tiles Vinyl Paving Epoxy Terrazzo Exposed Concrete
Standard Length 4.8m
Standard Finish Anodised Aluminium
Options
Product Si110G Si170G Si270G Si370G
A: Coverplate Width 110 170 270 370
Min. 25 85 185 285
B: Gap Mid. Max. 53 80 113 140 213 240 313 340
Mvmt. 55 55 55 55
C: Exposed Width Min. Mid. Max. 290 318 345 360 388 415 460 488 515 560 588 615
Seismic Movement 77 137 237 337
Block Out: 110D x 60E x 25F x 20G Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
SeiMax D Coverplate EJs SiD: An architectural floor expansion joint system with a combination of recessed coverplate and thermoplastic seals. This seismic system is designed to house a range of floor-finishes. The seals and floor-finish provide a flush transition. Seals are purpose-designed with smooth ripples to accommodate more movement than other inferior designs. They are made from dual-durometer santoprene for use in areas where hygiene is imperative. SiD floor joint systems are prominently used in hospitals‌.but this type of system can be used for many applications such as apartments, public buildings (museums), retail centres, airport terminals and other commercial buildings.
Si D Previous Model No: SUAST
Performance No bump transition Weather / Anti-pathogenic seal Concealed fixings Thermal & seismic movement
Compatible Finishes Tiles Vinyl Epoxy Exposed Concrete
Standard Length 4.8m
Standard Finish Anodised Aluminium
Options
Product Si140D Si180D Si220D Si260D
A: Coverplate Width 140 180 220 260
Min. 90 130 170 210
B: Gap Mid. Max. 104 118 144 158 184 198 224 238
Mvmt. 28 28 28 28
C: Exposed Width Min. Mid. Max. 120 134 148 160 174 188 200 214 228 240 254 268
Seismic Movement 78 78 78 78
Block Out: 90D x 30E Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
SeiMax R Coverplate EJs SiR: Roof coverplate expansion joint system. Provides multi-directional seismic or other movement. Can be powder-coated to a range of colours. The system is a ridge-cap shaped aluminium coverplate system using cbar type coupling. It is not trafficable. Secondary water seal is included. Drainage spigots are available as an accessory item. The system can be supplied in a roof-wall version.
Si R Previous Model No: SURAC
Performance Roof seismic joint Primary & secondary weather seal Thermal & seismic movement
Standard Length 4.8m
Standard Finish Anodised Aluminium
Options
Roof/Wall Installation:
Product Si170R Si270R Si370R
A: Coverplate Width Thick 170 48 270 48 370 48
Min. 40 40 40
B: Gap Mid. Max. 75 110 125 210 175 310
Mvmt. 70 170 270
C: Exposed Width Min. Mid. Max. 345 380 415 445 530 615 545 680 815
Block Out: 125D x 90E Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Aquo P
Waterproof Carparks Stadium EJ AqP: Specially formulated polyethylene foam waterseal expansion joint. Where traditional waterseals leak (at junctions and upturns), AqP uses simple, quality welding technology. When correctly installed the system provides a 100% waterproof expansion joint seal. It has UV inhibitors for longevity and is tested to a 3 metre head of water, making it ideal for concrete swimming pools and dams. AqP can be used in conjunction with Unison coverplate and firerating systems. It is suitable for most types of construction including internal and external expansion joint waterproofing: Multi-story carparks, rooftop carparks, hospitals, retail centres, amenities, stadiums (especially plats), convention centres. (See also DzPFT)
Aq P Previous Model No: Uniseal PB
Performance UV stable High movement range 100% waterproof seal Pedestrian friendly support for High Heels Shopping Trolley
Compatible Finishes Epoxy Exposed Concrete
Standard Length Cut to size
Options
Product Aq30P Aq40P Aq50P Aq60P Aq70P Aq80P Aq90P Aq100P Aq110P Aq120P Aq130P Aq140P Aq150P
A: Seal B: Seal Width Depth 30 40 40 40 50 50 60 50 70 50 80 50 90 50 100 50 110 50 120 50 130 90 140 90 150 90
Min. 12 16 20 24 28 32 36 40 44 48 52 56 60
C: Gap Mid. Max. 25 38 33 50 43 65 51 78 60 91 68 104 77 117 85 130 94 143 102 156 111 169 119 182 128 195
Mvmt. 26 34 45 54 63 72 81 90 99 108 117 126 135
D: Installation Length per 1.5lt Gap Adhesive Kit 23 9.0 30 9.0 38 7.5 45 7.5 53 7.5 60 7.5 68 7.5 75 7.5 83 7.5 90 7.5 98 4.5 105 4.5 113 4.5
Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015
Aquo P
Waterproof Carparks Stadium EJ AqP: Specially formulated polyethylene foam waterseal expansion joint. Where traditional waterseals leak (at junctions and upturns), AqP uses simple, quality welding technology. When correctly installed the system provides a 100% waterproof expansion joint seal. It has UV inhibitors for longevity and is tested to a 3 metre head of water, making it ideal for concrete swimming pools and dams. AqP can be used in conjunction with Unison coverplate and firerating systems. It is suitable for most types of construction including internal and external expansion joint waterproofing: Multi-story carparks, rooftop carparks, hospitals, retail centres, amenities, stadiums (especially plats), convention centres. (See also DzPFT)
Aq P Previous Model No: Uniseal PB
Performance UV stable High movement range 100% waterproof seal Pedestrian friendly support for High Heels Shopping Trolley
Compatible Finishes Epoxy Exposed Concrete
Standard Length Cut to size
Options
Product Aq30P Aq40P Aq50P Aq60P Aq70P Aq80P Aq90P Aq100P Aq110P Aq120P Aq130P Aq140P Aq150P
A: Seal B: Seal Width Depth 30 40 40 40 50 50 60 50 70 50 80 50 90 50 100 50 110 50 120 50 130 90 140 90 150 90
Min. 12 16 20 24 28 32 36 40 44 48 52 56 60
C: Gap Mid. Max. 25 38 33 50 43 65 51 78 60 91 68 104 77 117 85 130 94 143 102 156 111 169 119 182 128 195
Mvmt. 26 34 45 54 63 72 81 90 99 108 117 126 135
D: Installation Length per 1.5lt Gap Adhesive Kit 23 9.0 30 9.0 38 7.5 45 7.5 53 7.5 60 7.5 68 7.5 75 7.5 83 7.5 90 7.5 98 4.5 105 4.5 113 4.5
Disclaimer: All design rights reserved. Design and specifications are subject to change without notice. The manufacturer does not accept liability where the material on these pages is misconceived, exploited, or lacks conformity. The intention of this information is to provide a reasonable description of products, procedures and capabilities. Rev.1 Copyright Unison Joints
www.unisonjoints.com.au
Ph 1300 214 015