Bryan Donkin RMG Gas Controls Limited
COMPANY PROFILE
regulate automate
store
measure evaluate
deliver
secure register
distribute
consume
Introduction
Founded in 1803, Bryan Donkin RMG Gas Controls Limited became a member of the RMG Group during January 1996. The parent company RMG Regel + Messtechnik GMBH - Germany, is well established in the design and manufacture of High Pressure Gas Control, Measurement and Analysing Equipment. Bryan Donkin RMG Gas Controls Limited has an enviable reputation as a ‘Worldleader’ in the design, manufacture and marketing of Gas Control Equipment to the Gas Industry. This has been achieved by combining some 200 years of experience and expertise, together with an impressive yet calculated strategy of continuous product development, investment and total quality commitment to all aspects of the business. It was in 1847 that the Company designed its first product for the gas industry and in the years to come there have been many ‘firsts’, earning Bryan Donkin RMG Gas Controls Limited a reputation as innovators with unmatched knowledge in the Gas Industry. The Company’s understanding of the need for continued research and development has led to a range of revolutionary products that have quickly established themselves as the standard for domestic, industrial and commercial markets. It is because of these reasons that a large majority of Gas Utilities and Customers have quickly identified the advantages of specifying Bryan Donkin RMG as their standard gas control equipment, guaranteeing long lasting reliability, quality and service. Service to the gas industries worldwide is now the cornerstone of the RMG Group activities, with representation throughout the world via a network of agents/representatives and joint ventures providing global satellite manufacturing facilities.
Quality The Company recognises that success is determined by its ability to satisfy our Customers requirement for quality and reliability in its products and efficiency in its service. The primary objective of the Company, therefore, is to adopt a total quality approach to all aspects of the business, driven by policies which perpetuate continuous improvement. A close understanding of our Customers needs is fundamental to this policy. To support this Policy, the Company is accredited to ISO 9001:2000 by Lloyd’s Register Quality Assurance.
Training & Development There is a positive commitment from the most senior level within the organisation to train and develop its employees. The Management Team is committed to pursuing a comprehensive programme of training and development to enable all employees to meet the business challenges. As the Company has developed, so its aims and strategy have altered to take account of changing markets and conditions. The management has endeavoured to share this information about the Company’s plans and intended direction with all employees to enable them to fully participate in the Company’s future success.
Manufacturing Programme
Regulators Gas pressure regulators are available in a wide variety of sizes and versions to suit pressures up to 100 Barg. These range from low pressure domestic service regulators, industrial/commercial regulators, large low pressure gas holder control valves to distribution and gas transmission regulators. Several of the regulator types have the option of an integral safety cut-off device and/or in built relief valve, with most having the facility for quick and easy maintenance by use of cartridge type construction, allowing the main regulator to remain in the gas line. Regulators are available in aluminium, cast iron, ductile iron or cast steel and can be supplied direct acting or pilot operated. A comprehensive range of control systems is also available together with a battery powered clocking system to facilitate multiple pressure settings of the regulator.
System Protection Equipment The worldwide gas industry has a most impressive safety record. The Bryan Donkin RMG range of safety devices – comprising slam shut security valves, non-return valves, overpressure relief valves and stream selection valves have been designed to enhance this record. Other equipment to compliment the product range includes a range of filters for installations requiring both inline and angle types.
Gas Pressure Reducing Stations (PRS) Bryan Donkin RMG Gas Controls Limited, has successfully engineered gas pressure reducing stations for over 50 years embodying the extensive range of control equipment manufactured by both the Company and the RMG Group. Skid mounted, pre-packaged pressure reducing and/or metering stations are designed and built to meet individual customer requirements and specifications. Units range from domestic meter boxes to high pressure gas transmission units. These typically include, filter, regulators, isolation valves and as necessary slamshut, safety relief valve and stream discrimination valves. Units are supplied worldwide to a wide range of industries including gas, steel, process, chemical etc. All designs take account of modern practices in the control of gases and incorporate features to provide a unit of high integrity. Factory built units are pre-tested and give users a high level of quality assurance, whilst simplifying on-site installation/commissioning and provide considerable savings in man power.
Below Ground Gas Control Modules Bryan Donkin RMG, manufacture a wide range of specifically designed below ground modules. These designs are completely self-contained, having all the essential elements of a conventional pressure reducing station. They are designed for use on gas distribution systems and industrial applications, where above ground space is restricted or minimum levels of environmental or aesthetic intrusion are required. The below ground range of modules include the Krysalis™, Krysalis16™ and Krysalis19™ these models have all working parts contained within a removable cartridge, which is retained by 6 bolts, together with a removable filter element contained within a separate chamber. All being housed in a ductile iron body which is installed underground into the gas main. The 280 Vector Module™ contains all the elements required for a gas pressure reduction station. The main elements, e.g. the regulator and slamshut, are well established products designed as removable cartridges to simplify maintenance. The Vector Module range also incorporates a separate filter chamber allowing replacement/cleaning of the filter element without removal of the main control cartridge(s). All the control elements are housed in a fabricated steel body. All models have corrosion protection by way of a high integrity glass flake epoxy coating. Above ground is a vent stack, which contains vent pipe for atmospheric reference pressure and relief valve together with the necessary instrumentation and pressure reference points. All units can be supplied as stand alone items or pre-packaged into a skid assembly which will considerably reduce on-site installation time.
Customer Training If you repair or service your own equipment, our Product and Maintenance Training Courses, give you the opportunity to learn the technology behind the features and functions and help you to effectively troubleshoot and maintain our product. Courses range from basic practical training to formal qualifications. We also welcome requests for tailor-made courses that will meet your specific training needs.
Spares & Service Regulator Maintenance is essential to ensure safe and accurate operation of equipment. Where continuity of supply must be guaranteed, we would recommend a frequent maintenance policy be considered. Our service team will be pleased to assist with your specific requirements.
Technical Support All our sales team undergo extensive product training and are able to give expert advise and would welcome the opportunity to discuss your particular requirements.
Worldwide Agents/Representatives Serving the gas industry worldwide requires us to have a ‘international’ presence, to this end we have a dedicated network of exclusive agents/representatives throughout the world. These appointed agents/representatives are in constant contact with Bryan Donkin RMG – Chesterfield, UK., and are given full support, product training and are aware of the latest product enhancements and developments to the Bryan Donkin RMG range of products and would be pleased to assist with any technical questions or product selection. Bryan Donkin RMG Gas Controls Limited is a progressive Company, developing new products and improving designs on a continuous basis, thereby ensuring our customers are utilising the most up to date gas control products. We very much hope that our brief introduction to the Company has provided you with sufficient data to assess our capabilities and experience. Naturally, both the sales team and our worldwide representatives are always on-hand for further discussion and look forward to being of service to your business in the near future.
General Information Bryan Donkin RMG Gas Controls Limited Address Enterprise Drive, Holmewood, Chesterfield, Derbyshire, England S42 5UZ tel +44 (0) 1246 501 501 fax +44 (0) 1246 501 500 e-mail sales@bdrmg.co.uk training training@bdrmg.co.uk web www.rmg.com Registered No. 3123056 England VAT No. 657 864 776 Registered Office Enterprise Drive, Holmewood, Chesterfield, Derbyshire, England S42 5UZ Type of Company Wholly owned subsidiary, Limited Company Nature of Business Manufacture & design of Gas Control Equipment, including, regulators, filters, safety devices and pressure reduction/metering stations. Associations The Institute of Gas Engineers and Managers (IGEM) Quality Assurance Auditors ISO 9001:2000 & PED 97/23/EC Lloyds Register Quality Assurance
SERVING THE GAS INDUSTRY WORLDWIDE
WWW.RMG.COM
Bryan Donkin RMG Gas Controls Ltd. Enterprise Drive, Holmewood, Chesterfield S42 5UZ, England Tel +44 (0)1246 501-501 | Fax +44 (0)1246 501-500 GERMANY RMG Regel + Messtechnik GmbH Osterholzstrasse45 D-34123, Kassel, Germany Tel +49 (0)561 5007-0 Fax +49 (0)561 5007-107
WÄGA Wärme-Gastechnik GmbH Osterholzstrasse 45 D-34123 Kassel, Germany Tel +49 (0)561 5007-0 Fax +49 (0)561 5007-207
RMG Messtechnik GmbH Otto-Hahn-Strasse 5 D-35510 Butzbach, Germany Tel +49 (0)6033 897-0 Fax +49 (0)6033 897-130
RMG-Gaselan Regel + Messtechnik GmbH Julius-Pintsch-Ring 3 D-15517 Fürstenwalde, Germany Tel +49 (0)3361 356-60 Fax +49 (0)3361 356-836
CANADA Bryan Donkin RMG Canada Ltd. 50 Clarke Street South, Woodstock Ontario N4S OA8, Canada Tel +1 (0)519 53 98 531 Fax +1 (0)519 53 73 339 POLAND Gazomet Sp. z o.o. ul. Sarnowska 2 63-900 Rawicz, Poland Tel +48 (0)65 546 24 01 Fax +48 (0)65 546 24 08
UNITED STATES OF AMERICA Mercury Instruments Inc. U.S.A. 3940 Virginia Avenue Cincinnati, Ohio U.S.A. 45227 Tel +1 (0)513 272 1111 Fax +1 (0)513 272 0211
Your local contact can be found on WWW.RMG.COM e-Mail: sales@bdrmg.co.uk