On the tools WASTEWATER PUMPS
Working with small bore wastewater pumps In the first of five small bore wastewater pump training articles, Saniflo gives an introduction to the available types. Wastewater pumps can provide alternative, innovative, efficient and cost-effective plumbing solutions in situations where access to existing gravity drainage is not possible: Fixtures may be below the existing sewer/drainage level A new bathroom, laundry or kitchen is being installed in the middle of an existing building, away from any current services or fixtures Design constraints make it too difficult to access conventional drainage. This series will review three types of small bore wastewater pumps: macerator pumps, greywater pumps and lifting stations.
bathroom—toilet, shower, vanity basin and bath, or a combination of these fixtures. Typical macerator pump.
2. Greywater pumps
Typical greywater pump.
A greywater pump is specifically designed to take the incoming wastewater from fixtures such as a kitchen sink, dishwasher, laundry tub, washing machine, hand basin and/or shower, and discharge it through a small-bore pipe to the nearest gravity drainage connection.
3. Lifting stations A lifting station is a larger greywater or combined black- and greywater pump with a larger diameter bore, designed for higher output performance to take the waste from multiple fixtures in demanding commercial or domestic applications. It can be installed remotely from the fixtures.
Typical greywater lifting station.
1. Macerator pumps A macerator grinds/chops organic toilet waste with blades or cutter assemblies rotating at high speed. This fine slurry is then discharged from the pump via a small-bore pipe to the nearest gravity drainage connection. A macerator pump can discharge wastewater from a full
Typical combination lifting station.
Visit the Saniflo Plumber Portal at www.saniflo.co.nz/plumberportal
KEMPRESS® STAINLESS STEEL. FASTER. SAFER. SMARTER. • Made from 316L stainless steel • Higher corrosion resistance and durability Low carbon content and min. 2.3% molybdenum • High strength and smooth finish Precision TIG welding, facilitating the perfect “press fit”
• Huge range of tube and fittings Huge range of tube and fittings in sizes 15 -108mm and pressures up to 4000kPa for Water, Gas & Industrial applications • High performance quality stainless system Fittings made from MM Kembla Stainless Steel tube, ensuring precise tolerances, tightly controlled quality and full range annealing to ensure material properties required of the highest performance system • National availability, technical and sales support Renowned MM Kembla quality, reliability and service Contact MM Kembla for a huge range of stainless steel tube and press fittings and finish fast and in front.
S TA I N L E S S S T E E L Phone: 09 274 0111 or 0800 KEMBLA Email: sales@kembla.co.nz www.kembla.co.nz
MM Kembla NZ Ad 185 x 130mm.indd 1
046
nzplumber
7/2/19 11:58 am
