ZinserSpeed 5M Saves energy non-stop
New: energy-saving mode for suction and blowing Energy consumption Standard roving frame
Full power only for cleaning Up to 65% less energy used
Energy saved in energy-saving mode ZinserSpeed 5M
The new roving frame ZinserSpeed 5M for manual doffing: more economical on power, more reliable in operation, more efficient.
locations where the mains power supply is unreliable. Short power outages are bridged, while in the event of longer interruptions the roving frame shuts down in a controlled manner.
Up to 65% less energy required for suction and blowing The suction system and flyer table blowing system use far less power when operating in the new energy-saving mode. Full power is only required briefly for the cleaning cycle. You can adjust the intervals to suit your needs and material.
Spend time on production, not adjustment Easily accessible change gears speed up lot changes. The EasySpin touchscreen and feeding creel are positioned ergonomically, and you can empty the travelling cleaner centrally.
Energy-efficient bobbin rail The new energy-optimized bobbin rail drive with improved gears also uses much less energy. No additional power use by the travelling cleaner A travelling cleaner can be connected directly to the integrated interface without any additional suction system. Standard mains power failure backup Smooth operation is guaranteed, even in
Zinser technology for all-round reliability – fast central settings at the EasySpin touchscreen – product database for speedy set-up – lot data transmission via USB stick – package engineering with 4-motor drive concept – adjustable mechanical pressure arms ensure quality – non-slip sliver feeding without drafting errors – electronic system reduces servicing requirement – roving breaks monitored at each spinning unit (optional) – low creel height and additional transport rolls for the production of high-quality fine yarn
Advantages Especially economical on energy Superb roving quality Wide application spectrum from fine to coarse Reliable operation even in a power outage Short set-up and servicing times Excellent ergonomic profile High efficiency rating
Oerlikon Schlafhorst Zweigniederlassung der Oerlikon Textile GmbH & Co. KG Carlstr. 60 . 52531 Übach-Palenberg . Germany Telefon +49 2451 905 1000 . Telefax +49 2451 905 1001 www.schlafhorst.oerlikontextile.com . info.schlafhorst@oerlikon.com
t
ZinserSpeed 5M Saves energy non-stop 260 gauge Number of spindles
Machine length (L) mm
Can diameter
Machine width (B) mm
48
7,628
20“ (500 mm)
4,296
60
9,188
24“ (600 mm)
5,263
72
10,748
84
12,308
96
13,868
108
15,428
120
16,988
132
18,548
144
20,108
168
23,228
180
24,788
192
26,348
220 gauge
1200
1558
2040
Number of spindles
ZinserSpeed 5M. (Drawing illustrates a creel version for 260 mm gauge.)
Machine length (L) mm
Can diameter
Machine width (B) mm
48
6,668
20“ (500 mm)
4,803
64
8,428
24“ (600 mm)
5,825
80
10,188
96
11,948
112
13,708
128
15,468
144
17,228
160
18,988
176
20,748
192
22,508
208
24,268
368-641.055/OSC/ZIN/04-12/ZS5M/1EN
Machine data Application range Staple fibres up to 63 mm
Flyer speed max. 1,500 rpm (depending on configuration)
Raw materials Cotton, viscose rayon, manmade fibres and their blends
Gauge T 220 and 260 mm
Number of spindles 48, 60, 72, 84, 96, 108, 120, 132, 144 168, 180,192 (T = 260 mm) 48, 64, 80, 96, 112, 128, 144, 160, 176, 192, 208 (T = 220 mm) Flyer sizes (depending on configuration) 400 mm x 150 mm (16˝ x 6˝) for 220 and 260 gauge 400 mm x 175 mm (16˝ x 7˝) for 260 gauge
Count range 2,222 tex–200 tex (Nm 0.5–Nm 5.0) (Ne 0.3–Ne 3.0) Twist range 10–100 twists per meter (0.25–2.54 tpi) Draft range 3.0–15.8 fold (depending on configuration)
Oerlikon Schlafhorst Zweigniederlassung der Oerlikon Textile GmbH & Co. KG Carlstr. 60 . 52531 Übach-Palenberg . Germany Telefon +49 2451 905 1000 . Telefax +49 2451 905 1001 www.schlafhorst.oerlikontextile.com . info.schlafhorst@oerlikon.com
Drafting system 3-roller/double apron drafting system or 4-roller/double apron drafting system Options TensionControl Individual roving detection POC Restrictions For numbers of spindles from 176 and 180, respectively: applicable for cotton only