Air Interlacing Jets DTY False-Twist Texturing Heberlein庐 SwissJet The Swiss original with new jet inserts for best interlacing at lowest operating costs The innovative solution for highest air interlacing performance with maximum yarn protection and lowest operating cost. Uniformity of interlacing without compromise. Lowest coefficient of variation. Gentle yarn treatment thanks to optimised ceramic surfaces. Tested by Fraycam. Modern carbon fiber reinforced housing with excellent product life. Rapid amortisation through lowest air consumption and attractive price. Exchange of jet plates by the press of a button. The slider with jet plate is locked in its housing and unlocked without tools. Cleaning of the complete jet by spray washing; cleaning of jet plate together with slider in an ultrasonic bath.
Cutting edge range of jet plates: S1, S2 and S3 series for yarns up to 240 dtex. Extremely regular interlacing with maximum knot count at yarn speeds up to 1200 m/min. S12, S16 and S18 with vortex chamber for limited knot count at high stability.
Our product range Air jets Aspirating, cutting and splicing units Bearings and rollers Friction discs Friction units Spindles Certified Quality ISO 9001-2000
Oerlikon Heberlein Temco Wattwil Inc. Bleikenstrasse 11 路 9630 Wattwil, Switzerland T +41 71 987 44 44 路 F +41 71 987 44 45 www.components.oerlikontextile.com 路 info.heberlein@oerlikon.com
Air Interlacing Jets DTY False-Twist Texturing Heberlein® SwissJet Performance characteristics Count range [dtex] (den = 0,9 dtex)
Air usage [m3/h]*
Typical range Special remarks
Jet in use
Formula applies from 0,8 bar pe = pressure [bar]
Limits of application
- Regular interlacing S1 - High interlacing density S2 - Reduced air consumption by S3 means of Air Twist Chamber (ATC).
0,562 (pe+1)
- Limited knot count - High stability
S12
0,911 (pe+1)
S13
1,189 (pe+1)
S16
1,859 (pe+1)
S18
2,772 (pe+1)
0,712 (pe+1) 0,911 (pe+1)
50 Air consumption
78
110 167 240 330 450 660 800 990 1200 1600
Interlacing density
qvn [m3/h]*
Coefficient of variation CV(%) Fp/m
Fp/m (PES dtex 110f144 HE)
22
180
20
S18
18
170
16
160
14
150
S16 12
90
SwissJet S1
80 70
Competitors
60
140
50
10 S13
8
S12, S3 S2 S1
6 4 2 0 0
1
2
3
4
5
6
pe [bar]
pe = Pressure (gauge) [bar] qvn = Air consumption [m3/h]* psi = 14,7 x bar, CFM = 0,588 x m3/h
130
Competitors
40
120 110
30
100
20 1.0
2.0
3.0
4.0
SwissJet 1.0
5.0
2.0
3.0
4.0
5.0
pe [bar]
pe [bar]
Surface quality (yarn channel)
Dimensions and weight
SwissJet
* Under standard conditions according to DIN 1343: Temperature = 0 °C, Pressure = 1,01325 bar, Relative Humidity = 0%, (1 standard cu.meter = 1,293 kg) Losses in pressurised system not considered.
Compressed air requirements – Pressure fluctuations max. ± 0,1 bar – Temperature 25 °C ± 5 °C – Relative humidity < 40% – Residual oil content < 0,1 ppm ideally oil free (1 ppm ~ 1 mg/m3) – chemically neutral – free from active abrasive particles, particle size > 1.0 μm 100% to be removed
Competitors SwissJet: Weight 49 g (without nipple and connector), dimensions in mm
Max. allowable air pressure 6 bar Subject to change without prior notice · © 2011 Oerlikon Heberlein Temco Wattwil AG, 9630 Wattwil, Switzerland 740421/04 This product is covered by property rights (patent, protected design). Further information see www.components.oerlikontextile.com