Saurer Sequins and Soutache System Technical Data Machine types
Availability: Sequins and Soutache (Spangle and Cording) device for the Saurer embroidery machines: • Epoca 05 1-1 (Standard, Pentamat and Pentacut) up to 20 m • Era Available also in combination with laser, therefore the laser height must be adjusted. In combination with cone carriers, the sequins spools will be installed above the embroidering positions. Variants:
Specifications
Sequins
from 8/4 upwards (without 20/4, 40/4,...)
Soutache
from 8/4 upwards (every repeat)
Sequins and Soutache
from 8/4 upwards (Sequins und Soutache with identical repeat and not on the same embroidering position)
Lift
only on Pentacut machines
Speed 1)
Sequins
above 400 1/min
Soutache
above 300 1/min
Sequins and Soutache
above 300 1/min
Sequins diameter
2)
4 mm, 5 mm
1) The speed depends on the article to be manufactured, the yarns used and the operating conditions. 2) Further diameters on request (each diameter needs own components).
Control system
Operation: • via integrated control unit of the embroidery machine (color touch screen monitor) • controlled with Pragmas in the embroidery program
General technical data
Embroidery height: Due to the space required by the device, the fabric surface is reduced by 40 mm at the top; the embroidery height is reduced by: Sequins: max. 47 mm Soutache: max. 70 mm Sequins und Soutache: max. 70 mm
Oerlikon Saurer Arbon Ltd. Textilstrasse 2 9320 Arbon, Switzerland Phone +41 71 447 51 11 Fax +41 71 447 54 11 www.saurer.oerlikontextile.com info.saurer@oerlikon.com DS0.0184.E00 05/10 Subject to technical modifications
·
·
·
·
·
Data format: SHC, optimally supported with EmStudio up from V3.30