Saurer Epoca 05 Second Generation Foundation 1-1 Machine types
Standard Man. Pentamat Pentamat Pentacut
without embroidering position selector manual embroidering position selector with standard thread feed roller automatic embroidering position selector automatic embroidering position selector with thread cutting device
Options:
• Universal roller cloth system FastSpan, suitable to all common roller cloths; device for fabric pull-through • Pentafeed: single thread feed with manual switching for standard machines • Cone carriers: 4/4, 8/4 • Winding sensor • other embroidery lengths on request
Saurer Epoca 05
Illustration
œrlikon
s aurer
Specifications
œrlikon
œrlikon
Saur er Epoca 05
Saurer Epoca 05
saure r
Embroidery length
[yard] [m]
No. of embroidering positions
10.6 9.7
16.3 14.9
22.0 20.1
27.7 25.3
33.4 30.5
360
552
744
936
1128
7.6
12.8
18.0
23.2
28.4
33.6
Fabric shaft length
[m]
5.2
10.4
15.6
20.8
26.0
31.2
[t]
5.0
7.5
10.0
13.0
-
-
Single main drive
[t] [1/min]
Double main drive [1/min] 1)
-
-
-
13.5
16.5
19.5
510
510
500
450
-
-
-
-
-
500
480
430
The speed depends on the article to be manufactured, the yarns used and the operating conditions.
Embroidery height 2)
[mm]
1650
Machine height
from floor operating height
[m] [m]
3.0 0.95
Room height
minimum recommended
[m] [m]
3.3 3.8
Machine width
net
[m]
1.4
2)
Restriction for machines with thread cutting and roller cloths with longitudinal tension rods: The thread cutting device can be used 10 cm above the lower longitudinal tension rod and higher.
Oerlikon Saurer Arbon Ltd. Textilstrasse 2 9320 Arbon, Switzerland Phone +41 71 447 51 11 Fax +41 71 447 54 11 www.saurer.oerlikontextile.com info.saurer@oerlikon.com DS0.0164.E01 09/09 Subject to technical modifications
·
4.9 4.5 168
Double main drive
·
Saurer Epoca 05
[m]
Maximum speed 1)
·
saur er
Machine length Net weight (approx.) Single main drive
·
œrlikon
saurer
·
Saurer Epoca 05 Second Generation Foundation 1-1 General technical data
Smallest needle repeat: 4/4 french inch = 27.07 mm Lateral movement: max. 116/4 repeat = 785 mm Smallest stitch unit: 0.1 mm horizontally and vertically Boring depth: 0 to 20 mm stepless (= max. Ø 4.2 mm with borer 12%)
Fabric shaft-Ø: without cloth: 92 mm; wound with fabric: max. 106 mm Spool sizes: normal: Ø 50 x 85 mm Cones: Ø 110 x 230 mm (4/4, with 5 rows) Ø 125 x 230 mm (8/4, with 3 rows) Shuttles: Only Saurer "Silenzio" Bobbin size: 43 0/-0.2 x 14.7 0/-0.2 mm
Control system
Operation: Color touch screen monitor, manual control unit, keyboard for wind-up, foot switch Thread monitor: Standard/Man.Pentamat: segmental monitoring Pentamat/Pentacut: OptiPoint (single embroidering position monitoring)
Connections
Electrical supply: 3 x 400 VAC +/- 10% + PE 50/60 Hz +/- 2% A transformer is needed for other voltages (option)! We recommend using an UPS for the entire company. Overvoltage protection in accordance with our specification is required.
Data format: Standard Highlevel Code (SHC) Data interface: LAN; USB; diskette
Pre-fusing: 32 A time-delay 3 phases (supply wire gauge min. 4 x 16 mm2) If local regulations require the installation of RCCB's, use an RCCB with a sensitivity of 300 mA, selective, pulse-power stable and inverter proof. Compressed air (customer): Compressed air supply 7 to 10 bar
For further specifications refer to document DS0.0169.E30.
DS0.0164.E01 09/09
Subject to technical modifications