Texturing Unit FTS4712/FTS4715 Friction texturing single unit series FTS4712/FTS4715 The FTS unit series FTS4712 and FTS4715 are belt driven friction texturing units for high yarn speeds. The integrated bearings, which are mounted on a compact base plate, ensure exact axial and vertical distances of the friction discs and, therefore, provide a high uniformity of yarns as well as low vibration. The friction discs are mounted via push fit on the bearing shafts and are fixed by means of a spring cap with defined pressure force. This construction and the open design of the units allow fast disc change. Due to the covering of the timing belt, contamination is avoided and thus a long service life is assured. Yarn threading is through a mobile threading device and as a result the units are particularly user- and maintenance friendly. Another significant advantage is the high visibility of the yarn path within the unit. The units can be used for initial equipment, as well as for upgrading all established high-efficiency texturing machines.
Texturing unit FTS4712-Set, mobile threading device ME15
Important Characteristics: - Disc diameter -
Disc width Max. disc combination (6 mm FS) Shaft diameter Minimum pitch
-
Yarn entry and exit guides Axial distance
-
Whorl diameter
-
Diabolo spacers Fitting caps with defined pressure force
Oerlikon Textile Components GmbH ⋅ Zweigniederlassung Hammelburg Fuldaer Str. 19 ⋅ 97762 Hammelburg, Germany T +49 97 32 87 0 ⋅ F +49 97 32 87 310 sales.temco@oerlikon.com ⋅ www.components.oerlikontextile.com
(FTS4712) (FTS4715)
(FTS4712) (FTS4715) (FTS4712) (FTS4715) (FTS4712) (FTS4715)
45 mm 50 mm 6 mm 1-8-1 12 mm 90 mm 97 mm snap-in 33.77 mm 38.5 mm 25 mm 28 mm
Texturing Unit FTS4712/FTS4715 Yarn tension measuring: The units can also be equipped with Temco yarn tension sensors (ZKS). Tey can be converted at any time by a simple exchange of covers.
Brackets: For mounting in different machine types, Temco offers the corresponding bracket types.
FTS4712 – Fric Friction disc Diameter 45 Millimeter (left (left fig. Thread delivery speed VA [m x rpm] and disc speeds ns [m x rpm] depending on D/Y VU = Disc circumferential speeds [m x rpm] VA = Thread delivery [m x rpm] ns = Disc speeds [m-1] FTS4715 – Friction disc Diameter 50 mm (right fig.)
FTS4712 – Fric riction disc Power requirement P[W] depending on disc speeds ns [m x rpm] and thread delivery speeds VA [m x rpm]* *measured in driving whorl (Ø 28 mm) on FTS4712 resp. 4715, on motor unit at motor shaft Examples: Unit without thread Unit with thread - PES dtex 167f30 draw ratio = 1.73, D/Y = 2.2 ceramik discs (combination 1/8/1) Unit with thread - PES dtex 167f30 draw ratio = 1.73, D/Y = 2.2 Polyurethane discs (combination 1/7/1)
Subject to change without notice © 2011 Oerlikon Textile Components GmbH, ZNL Hammelburg, Germany, FTS4712/FTSA4715-FE-08-2011