Texturing Units Temco® FTS52R Friction texturing single unit series FTS52R The FTS unit series FTS52R is a belt driven friction texturing unit and is suitable fort he highest yarn speeds. The shaft diameters 14.45 mm of the bearings have a high rigidity and, therefore, assure low vibrations at high yarn take-off speeds. The compact base plate ensures an accurate fit of the integrated high-speed bearings and ensures the exact positioning of the friction discs, which is a precondition for high yarn uniformity on the machine. The friction discs are attached to the bearing shaft via a slide fit and are secured with a spring cap that has a defined pressure force. This construction, together with the open design of the units, enables a rapid disc change. The design of the adapter support for the toothed belts prevents contamination and ensures a long belt-life. Yarn threading is through a mobile threading device and as a result the units are particularly user- and maintenance friendly. Another significant advantage is the high visibility of the yarn path within the unit. The units can be used for new equipment, as well as for upgrading all established high efficiency texturing machines. Texturing unit FTS52R-Set with mobile threading device
Important characteristics: - Disc diameter - Disc width - Max. disc combination - Shaft diameter - Minimum pitch - Yarn entry and exit guides - Axial distance - Whorl diameter - Diabolo spacers - Fitting caps with defined pressure force
Oerlikon Textile Components GmbH ⋅ Zweigniederlassung Hammelburg Fuldaer Str. 19 ⋅ 97762 Hammelburg, Germany T +49 97 32 87 0 ⋅ F +49 97 32 87 310 sales.temco@oerlikon.com ⋅ www.components.oerlikontextile.com
52 up to max. 53.5 mm 9 mm 1-8-1 14.45 mm 108 mm snap-in 37 mm 28 mm
Texturing Units Temco® FTS52R Yarn tension measuring: If desired, the brackets of the FTS52R units can be equipped with chute or with yarn tension sensors. Retrofitting is possible at any time. Brackets: Temco provides the appropriate mountings to fit he various machine types.
Thread delivery speeds VA [min∙min-1] and disc speeds ns [min-1] depending on D/Y VU = Disc circumferential speeds [m∙min-1] VA = Thread delivery speeds [m∙min-1] ns = Disc speeds [min-1]
Power requirements P[W] depending on disc speeds ns [min-1] and thread delivery speeds VA [m∙min-1] Examples: 1 Unit without thread - Polyurethane discs (stacking 1/7/1) or ceramic discs (stacking 1/10/1) 2 Unit with thread - PA 22 dtex f7 Drawing ratio = 1.34, D/Y = 2.2 - Polyurethane discs (stacking 1/4/1) 3 Unit with thread - PES 167 dtex f30 Drawing ratio = 1.73, D/Y = 2.2 - Ceramic discs (stacking 1/10/1) 1 Unit with thread - PES 167 dtex f30 Drawing ratio = 1.73, D/Y = 2.1 - Polyurethane discs (stacking 1/7/1) *) measured at FTS52R at driving whorl (dia 28 mm), on FTS52M at motor shaft
Subject to change without notice © 2011 Oerlikon Textile Components GmbH, ZNL Hammelburg,Germany, FTS52R-FE-08-2011