Precision gear metering pumps For paint applications
Gear metering pumps for industrial and automobile paint applications
Oerlikon Barmag – the synonym for highest metering accuracy and shortest flushing times! Oerlikon Barmag has been manufacturing precision gear metering pumps since the company was founded in 1922. Since then, several million pumps of this type have been manufactured, which are primarily commissioned for spinning manmade fibers. In 1985, precision gear metering pumps for metered surface coating and paint applications have been included in the product portfolio. From this date onwards, more than 35,000 paint metering pumps have been successfully installed throughout the world. Among other things, Oerlikon Barmag pumps excel in terms of their flow-favorable construction and their lack of dead spots.
Precision gear metering pumps – Oerlikon Barmag
These are the fundamental prerequisites for carrying out effective cleaning with low consumption of flushing agents, hence preventing dye residues. The tightest tolerances and reproducible quality in the manufacture of the gears and the surrounding gear plate have the greatest influence on the conveying precision. Beyond the program shown here, we can also supply pumps of the same construction made from other materials and/or for other throughput capacities. Our specialists can advise you on the selection of the type of pump most suitable to your specific requirements.
Metering with the highest precision
The SV series paint metering pumps have proven themselves in operations for decades now. The pumps are offered in two material designs: a highalloy chromium steel with a special anti-wear protection is used for metering solvent paints.
Due to the process, the pumps are used in a viscosity range of between 20 and 200 mPas, a maximum counter-pressure of 10 bar and a temperature load of up to 40°C. The metering pump speed is dependent on the application, but should not exceed 200 rpm and a driving torque of 12 Nm.
For metering water-based paints, pumps are manufactured from non-rust and acid-resistant steel with special anti-wear protection.
Pump model Pump model feed direction dim. with without capacity of rotation A flushing holes flushing holes cc/rev. mm
dim. dim. application application B C solvent waterborne mm mm paint paint
SV99B SV100B SV95P SV95N SV96K SV96G
90,5 90,5 90,5 90,5 109 109
SV99C SV100A SV95R SV95T SV96L SV96N
1,2 1,2 3,0 3,0 6,0 6,0
105,5 105,5 115,7 115,7 130,4 130,4
75 X 75 75 X 75 64 X 64
X X X
Precision gear metering pumps – Oerlikon Barmag
GP series – the light, modular system generation
The new GP series of paint metering pumps is designed for universal use with solvent paint and water-based paint. The pumps are manufactured from non-rust and acid-resistant special steel.
and bearing rinsing features. The flushing block, which is identical for the entire series, with suitable connection adaptations for solvent feed and air pressure, is also part of the range.
Due to an additional special coating, a surface quality of 3000 HV is achieved. Fast dye changes are possible as a result of the metering pumps’ bypass
The weight-optimized metering pumps can be exchanged 1:1 in the available sizes, which cover 1.2 cc/rev. through 9 cc/rev. GP series pumps can be supplied with various seal variants and, if necessary, with a selection of accessories.
Pump model feed capacity cc/rev.
dim. direction of A rotation mm
weight
GP121C GP301C GP601C GP901C
105,6 109,6 114,1 121,5
1,8 1,9 2,2 2,5
Precision gear metering pumps – Oerlikon Barmag
1,2 3,0 6,0 9,0
kg
Quality – the key to success
Oerlikon Barmag guarantees the quality of your business processes using a management system in accordance with DIN EN ISO 9001:2000. Based on product phase-related quality planning, all Barmag products and their
components are subjected to individual quality control stages. The subsequent approval of the conveying precision and the function of all pumps using our testing equipment guarantee the highest degree of reliability and customer benefit.
Zeiss Prismo measurement device
Precision gear metering pumps – Oerlikon Barmag
Oerlikon Barmag Zweigniederlassung der Oerlikon Textile GmbH & Co. KG Leverkuser Straße 65 P.O. Box 11 02 40 42862 Remscheid GERMANY Phone +49 21 91 67-0 Fax +49 21 91 67-12 04 www.pumps.barmag.com pumpsales@barmag.de Oerlikon Textile Inc. 8801 South Boulevard P.O. Box 70 46 Charlotte N.C. 28241 U.S.A. Phone +1 704 588 00 72 Fax +1 704 588 20 47 info@saurerinc.com
The information supplied in this brochure is for guidance only. We reserve the right to modify it at any time.
OBA 112 e / 11/2007 Studio 45 / Koch Subject to changes
Oerlikon Textile Far East Ltd. Units 3807 38/F, Wu Chung House 213, Queen‘s Road East Wanchai, HONG KONG P.R.CHINA Phone +852 28 27 43 14 Fax +852 28 27 52 50 matthias.rudolph@sfe.saurer.com Oerlikon Textile India Pvt. Ltd Empire Industries Complex 414, Senapati Bapat Marg Lower Parel (West) Mumbay-400013 INDIA Phone +91 22 6652 7900 Fax +91 22 6652 7901 management@saurerindia.com