Offshore Holland | 14 2016

14 Maiden heavy lift project

Photo: Flying Focus.

Dutch knowledge is called in when the going gets tough

OH14.indd 1

07-10-16 13:25

Created and produced by

OFFSHORE WIND

OIL & GAS

MARINE ENERGY

Save the Date

Supported by

OH14.indd 2

07-10-16 13:25

November | 2016

08 | Holland+You Offshore Holland is a magazine with the objective to promote the interests and export opportunities of the Dutch supply- and service companies in the upstream oil and gas industry.

Moreover technological developments will be highlighted in order to contribute to a positive

The Dutch Economic Government Network in the different GCC economies aims to help Dutch business succeed in this increasingly challenging environment. It offers a platform for interaction between Dutch and Gulf business stakeholders online and offline.

representation and positioning of the Netherlands as innovative and ingenious partner country.

Initiators

12 | Maiden heavy lift project Allseas’ dynamically positioned single-lift installation/decommissioning and pipelay vessel ‘Pioneering Spirit’ successfully executed her maiden heavy lift project. Picture front page: Flying Focus, Holland. (www.flyingfocus.nl)

Supported by

14 | Perfection from bow to stern Royal IHC has introduced a new design philosophy for offshore vessels. The company’s new line of vessels showcases its renowned ability to transform functional requirements into optimal performance.

Advertising Navingo BV, Las Palmas Building Wilhelminakade 302, 3072 AR Rotterdam The Netherlands Contact: Jeroen Tresfon

0 4 | Welcome by the Ambassador of the Kingdom of the Netherlands in the UAE

T: +31 10 209 2600. E: jt@navingo.com

0 6 | Energy efficiency and sustainable development are key

Editorial

0 8 | Holland+You initiated to help Dutch business succeed

Han Heilig - Managing Editor T: +31 255 530577

1 2 | Maiden heavy lift project

E: han@practica.nl

1 4 | Perfection from bow to stern

Production

1 8 | Frames supplies eight filter coalescers and heat exchangers

Peter Ruiter - Practica Productions, IJmuiden

2 0 | Ground-breaking door safety test

Contribution Daniëlle Veldman (IRO) ©All copyrights reserved by Offshore Holland

2 2 | Load measurement solutions 2 3 | Floorplan Dutch Pavilion 2 4 | Company profiles Dutch exhibitors 2016

OH14.indd 3

3

07-10-16 13:25

Welcome It is with both pleasure and pride that I provide this introduction to the latest edition of Offshore Holland. The Dutch oil and gas industry belongs to the Top 5 in the world. More than 40 years of experience and knowledge in the oil, gas and maritime industry has given the Netherlands a leading position in Europe and the rest of the world.

Our maritime history and our position as a logistic hub make us a leading global knowledge economy. We can offer the UAE a unique combination of technological strength and our pragmatic, problem-solving attitude.

I am therefore delighted to welcome the Dutch participants from the oil and gas sector to the annual Abu Dhabi International Petroleum Exhibition and Conference (ADIPEC) in the energy capital of Abu Dhabi taking place from 7th November till 10th of 2016.

For more than 30 years, oil and gas professionals have gathered in growing numbers for the ADIPEC. The 2016 edition will further build on the success of last year’s event, which welcomed more than 94,000 attendees from 125 countries. This year’s theme “Transitional Strategies for an Efficient & Resilient Energy Industry” will address a range of topics, from macroeconomic factors of the global energy landscape, to a range of plenary and technical sessions addressing more specific challenges, initiatives and methodologies for creating an efficient and resilient industry.

It is undeniable that ADIPEC will take place in a global oil environment that has slowed down.

However, I must stress that Dutch oil and gas companies, still prioritize

4

OH14.indd 4

Frank Mollen, Ambassador of the Kingdom of the Netherlands in the UAE.

the UAE as an important business location because of its vibrant market and perspective for the future. Think of Shell, Boskalis, Van Oord, Fugro and IHC Merwede.

In addition the Netherlands also boasts many SMEs who provide niche technologies to the oil and gas industry here. For example, many of the 60 companies at ADIPEC 2015 were SMEs looking to offer their expertise and niche solutions, especially in the offshore sector. Dutch companies have established longstanding ties with the UAE and have weathered several oil crises in the region. The cyclical nature of the oil and gas industry demands a long-term perspective, the Dutch are here for that long term.

With this edition of ADIPEC, we are set once more to cement ties

with counterparts in the UAE and the Gulf. The Dutch pavilion this year will get a Holland+You touch.

Holland+You is a communication and branding platform initiated by the Dutch Economic network in the GCC to enhance the economic relationship between our country and the GCC region. I’m happy to see IRO collaborating with Holland+You to increase the visibility of the Dutch offshore industry during ADIPEC 2016.

I look forward to welcoming you and to successful matchmaking between Dutch companies and local and regional partners at the ADIPEC 2016.

Frank Mollen Ambassador of the Kingdom of the Netherlands in the UAE.

2016

07-10-16 13:25

IRO Exhibitions and Export programme 2016 - 2017 Date

Activity

City/Country

Offshore South East Asia

Singapore

1 - 4 May

OTC

Houston, U.S.A.

11 - 13 July

Oil & Gas Asia

Kuala Lumpur, Malaysia

5 - 8 September

Offshore Europe

Aberdeen, U.K.

2016

29 November - 2 December

2017

www.iro.nl & www.iro-noc.nl

adress

Postbus 390

phone

+31 (0)79 341 19 81

mail

info@iro.nl

13th oor 3011 XB Rotterdam

Boompjes 40 (Willemswerf)

3000 AJ Rotterdam

fax

+31 (0)79 341 97 64

site

www.iro.nl

The Netherlands

The Netherlands

postal

2016

OH14.indd 5

5

07-10-16 13:25

Sander Vergroesen, Managing Director of IRO

‘Energy efficiency and sustainable development are key’

“Looking at the energy market in the Middle East, energy efficiency as well as sustainable ways to meet the increasing demand in the region are key focus for Dutch suppliers in the oil and gas industry,” says Sander Vergroesen, Managing Director of IRO. Despite a slower progress at a number of projects and continuing challenges in the current market, he sees a stable level of activity of his member companies in the Gulf region.

Sander Vergroesen, Managing Director of IRO.

6

OH14.indd 6

2016

07-10-16 13:25

‘Next to conventional fossil energy, we also see a substantial growth in the development of renewable energy sources.’

“The IEA has predicted that the demand for energy in the Middle East will see an explosive growth,” Vergroesen continues. “Over the past decade, energy consumption has grown more than twice as fast as the world average. Driven by an increase in population and the need to develop additional infrastructure, some prestigious projects involving the development of LNG facilities and increasing the region’s refinery capacity, have been completed.”

Vergroesen is delighted to say that many of these projects have been realised in co-operation with specialised Dutch suppliers.”

material & equipment supply, onshore as well as offshore.

IRO

Holland+You

Sander Vergroesen represents IRO, The Association of Dutch Suppliers in the Oil and Gas Industry, that has been promoting the interests of Dutch supply and service companies in the upstream oil and gas industry since its foundation in 1971.

The 440 member companies cover all activities involved in the supply chain, such as engineering, field development, pipeline installation, maintenance, manufacturing and

Building on a solid collaboration with the Dutch government in the GCC countries, IRO also joined forces with the initiative Holland+You, launched by the Dutch embassies and consulate-general in the GCC. Vergroesen explains: “We are extremely happy to get the support of the Holland+You project, giving us the opportunity to enhance the visibility of the Dutch offshore industry during ADIPEC 2016.

IRO cooperates with several national and international organisations with similar interests. For the Gulf region, IRO, together with Association FME and the Dutch Ministry of Economic Affairs, participates in Dutch Energy Solutions (DES), a collaboration of oil and gas suppliers, R&D companies, associations and governmental bodies.

The objective of the cluster is to establish on-going exchange of information, knowledge and business contacts with partners in the Gulf region.

Moreover, alongside the celebration of the 45th anniversary of our association IRO this year, we also celebrate our 10th anniversary of being present at the exhibition with a Holland pavilion.

This year we have more than 25 exhibiting companies occupying a 480 square metres large pavilion in Hall 11.”

Asking Vergroesen about future opportunities in the Gulf region, he says: “For the forthcoming years, it is expected that annual spending is to increase five per cent year-on-year from USD 6.6 billion to USD 7.4 billion over 2016-2020. Research indicates that there are still over USD 300 billion of oil, gas and petrochemicals project opportunities in the region. Next to conventional fossil energy, we also see a substantial growth in the development of renewable energy sources.”

He concludes: “In this current market and looking at future predictions, the development of energy-related projects has a strong focus on energy efficiency by applying innovative techniques, as well as on sustainable solutions: exactly the strengths of many of our Dutch suppliers.”

2016

OH14.indd 7

7

07-10-16 13:25

In a region where between 65% and 95% of government revenues come from hydrocarbons, the recent slump in the oil price has, inevitably, had an impact across the different GCC economies. Although there is general consensus that lower oil prices are here to stay, at least for the foreseeable future, there are still a lot of growth opportunities in the region.

Even despite the challenge of a continued downward pressure on government spending.

The Dutch Economic Government Network in the GCC aims to help Dutch businesses succeed in this increasingly challenging environment.

8

OH14.indd 8

Holland+You is initiated to achieve this. It connects business needs in the region with Dutch solutions and offers a platform for interaction between

Dutch and Gulf business stakeholders online and offline. In this edition of Offshore Holland you can read all about this initiative.

2016

07-10-16 13:25

Holland+You is all about interaction

The GCC is an increasingly important trading partner for the Netherlands and the Dutch government. To further strengthen this partnership, the Dutch Economic Government Network in the GCC launched Holland+You. Holland+You is about three words: Generating, Connecting and Creating.

Generating more interaction between our businesses, connecting Dutch expertise and technology to demand in the GCC, and creating a platform for interaction. We believe that by joining forces and mutually sharing our knowledge, we can together contribute to healthy societies, sustainable economies and a future-proof way of living.

As part of our approach we identified a few key market sectors that are of special interests to the Netherlands.

Energy is one of these sectors. Not only are Dutch companies market leaders in the oil and gas industry and a lot of related industries, an increasing number of SME’s come up with innovative solutions to improve efficiency and enhance performance in this sector.

With the declining oil price there is a lot of interest in these innovative solutions. We aim to give Dutch companies a head start. Holland+You specializes in providing market insights, identifying potential business partners as well as providing you the right embassy network for advice and help in establishing or expanding a business within the GCC. An example of a Holland+You regional sector opportunities report that is available upon request or via the website is called “What are the opportunities for Dutch companies in the GCC energy market?”

Improve visibility of Dutch industries

Holland+You was launched in April

2015, on the King’s Day reception in Abu Dhabi. Since then we have steadily increased our network and worked hard to improve information flows between the government and the private sector. We have reached partnerships with different Dutch branch organisations like the IRO and we actively support other initiatives that promote Dutch business interests.

The idea behind Holland+You is that the Netherlands as a brand has been under-represented and can really boost the image of companies.

Companies, on their part, can greatly boost the image of the Netherlands.

Especially in the GCC, where the government and the private sector are closely intertwined, there is a lot to gain from working together.

Therefore an important part of our job is Holland Branding.

The most important aspect of Holland Branding is visibility. We do this in two ways. First of all we do a lot of promotion online. We have very active social media from which we try to promote Dutch initiatives that are taking place in the GCC. We aspire to become one of the main drivers for strengthening the economic relationship between Dutch and Gulf business.

On the other hand we also organize different activities. We provide a stage for companies, which they can use to promote themselves on big events like ADIPEC 2016 and we organise an increasing amount of events in cooperation with different business councils.

Another important reason why Holland+You was set up, is to streamline efforts in advancing business interests across the GCC. Although each GCC country has its own unique challenges and there are a lot of cultural differences between GCC countries, there are also a lot of similarities in the challenges they face. All GCC countries aim to diversify their economies, while still profiting from the oil and gas revenues. Water for example is increasingly becoming a scares commodity across the GCC and all these countries are trying to cope with growing populations. These challenges all form opportunities for those Dutch companies that offer innovative solutions for parts of these problems.

Another added value of the platform is the informative role that we can play. A big issue is a growing focus on reforming the heavily suppressed

2016

OH14.indd 9

9

07-10-16 13:25

energy, water and food prices in the GCC. Saudi Arabia and the UAE are ahead of the rest with regards to raising energy prices and cutting subsidies in response to fiscal pressures created by the slump in oil prices. Continued reforms will have wide-ranging implications for businesses based in the GCC. Holland+You can bring you into contact with the economic advisors at the different embassies who keep a close eye on these changes.

Besides our activities at the exhibition we will also organise a breakfast session and a reception. By cooperating we hope to improve our scope and bring you a better experience of ADIPEC.

Dutch companies to identify sound business prospects, target business professionals, discover potential business partners and get in touch with the Dutch economic network in the GCC.

Alongside the joint promotional and networking activities during ADIPEC 2016, the co-operation is also established to generate attention for the services of Holland+You within the group of IRO members.

These services entail the support to

What can Holland+You do for You?

Although the IRO knows the oil and gas market extremely well and offers a wide range of expertise and connections, Holland+You together with the Dutch embassies plays an important role in strengthening

Gaining foothold in the GCC market

ADIPEC 2016 is one of the biggest business events within the GCC this year and a key event within the oil and gas industry. Exhibitions play a crucial role within the way business is done in the GCC. Not only are all the big players of the industry present and is it the perfect place to see the competition, in a region where brands are very important, it is the perfect way to catch the eye of local and foreign investors and gain a foothold in the market.

The IRO and Holland+You cooperate by promoting the ADIPEC within the Dutch business community and by helping businesses increase their visibility during this exhibition.

10

OH14.indd 10

2016

07-10-16 13:25

‘In a country like Kuwait it is of significant value for us to be supported by the Dutch embassy.’

Herm Pol, Project Director van Oord

Dutch business interests. Herm Pol, Project Director of van Oord in Kuwait, explained it in an interview on our website rather nicely: “In a country like Kuwait it is of significant value for us to be supported by the Dutch embassy.

This helps us in doing business.”

The embassies have a broad network and take their role as connectors between parties very seriously.

They can point, especially for SME’s, in the right direction of important government bodies or local partners.

For instance when you have a questions about exporting to or investing in any of the GCC countries as well as requesting further information on potential business opportunities, you can contact Holland+You or the local embassies. Our teams at The Embassies in Abu Dhabi (UAE), Riyadh (Kingdom of Saudi Arabia),

Doha (Qatar), Muscat (Oman), Kuwait City (Kuwait) and the Consulate General in Dubai (UAE) are more than happy to assist you.

Holland+You also works together with the Netherlands Enterprise Agency (RVO). Together we can provide you with a more in-depth analysis of markets and possible business partners.

These so called business partner scans are done for a small fee, but include field work and a through analyses tailored to your needs. We visit possible partners and connect you with other useful contacts within the market. For more information on the business partner scan and other useful services, please visit the Netherlands Enterprise Agency (RVO) website, www.rvo.nl Besides the assistance in market research we can verify that the

company of interest is correctly registered with the corresponding local authority. We can also provide a list of law firms that can support your business during a trade dispute.

Common trade disputes include different interpretations of contracts and agreements as well as liability disputes arising from breach of local regulations and requirements.

We wish you all an enjoyable and successful exhibition in Abu Dhabi.

For readers who cannot make it; Holland+You hopes you enjoy this edition of Offshore Holland.

For more information about Holland+You please visit the website www.hollandplusyou.com or contact us via hollandplusyou@minbuza.nl.

2016

OH14.indd 11

11

07-10-16 13:25

Allseas demonstrates unique single-lift capabilities

‘Pioneering Spirit’ completes maiden heavy lift project Allseas’ dynamically positioned single-lift installation/ decommissioning and pipelay vessel ‘Pioneering Spirit’ successfully executed her maiden heavy lift project, removal of the 13,500t Yme mobile offshore production unit (MOPU) in the North Sea, 100 kilometres off the coast of Norway, on 22 August 2016 for Repsol Norge AS.

The Yme MOPU is a jack-up type platform standing on three steel legs of 3.5 metres diameter, which are inserted approximately 10 metres inside the subsea storage tank columns at 93 metres water depth.

After sea-fastening work the Yme was transported to the newly developed dismantling yard in Lutelandet, Norway.

The ‘Pioneering Spirit’ in the Yme field.

12

OH14.indd 12

2016

07-10-16 13:25

Fast lift of the Yme module.

Move in operation.

Move out operation.

2016

OH14.indd 13

13

07-10-16 13:25

Royal IHC introduces new design philosophy for offshore vessels

Perfection from bow to stern When it comes to innovative equipment and vessels for the maritime industry, Royal IHC has led the way since the 17th century. Which is why IHC’s new line of offshore vessels doesn’t just raise the bar in terms of design, safety, comfort and efficiency – it redefines it. Every single aspect, from the overall functional process and mission equipment down to the smallest detail of the control stations, has been carefully designed and engineered. Together, they result in a vessel unrivalled in quality and performance. Or as we like to call it: integrated perfection from bow to stern.

14

OH14.indd 14

2016

07-10-16 13:25

Dutch design

Royal IHC has introduced a new design philosophy for offshore vessels.

The company’s new line of vessels showcases its renowned ability to transform functional requirements into optimal performance with contemporary, safe and comfortable Dutch design.

The new signature design is the result of close cooperation with yacht

designer Mulder, and interior architect HofmanDujardin. The philosophy is to create a ‘home away from home’ in an efficient and high-tech environment.

IHC’s goal is to build purpose-built vessels with the intended mission and people in mind, so they can carry out their duties as safely and efficiently as possible.

Clear routing

Transparency and clear routing were

the focus for the layout of our new offshore vessel series. Different functional areas are separated and marked by colours and signage, while the transparent central stair well connects both worlds. Every aspect of the offshore vessels – from the functional process and mission equipment, down to the smallest detail – has been carefully designed and engineered to ensure the highest level of safety.

2016

OH14.indd 15

15

07-10-16 13:25

Home away from home

IHC has taken the experience of people on board and used this as a basis for the design, with the aim of creating an environment for the ultimate comfort of the crew.

The abundance of daylight, outdoor area space and modern furniture enhance the social interaction between crew members – boosting morale and team spirit.

The cabins are designed to feel like a retreat, with a warm and homely atmosphere. In addition, the work

16

OH14.indd 16

and recreational areas have been separated to provide the utmost quietness and comfort so the crew is able to sit back, relax and enjoy their personal space and free time.

‘Old school’ hull for maximum efficiency

retaining excellent sea- and station-keeping capabilities.

With this new concept, IHC has reinforced its reputation for providing superior functionality with unparalleled and integrated design.

The hull lines are the result from IHC’s successful series of offshore vessels. The hull has been optimised based on the company’s extensive experience, using CFD tools and model testing to accomplish low resistance during transit, while still

2016

07-10-16 13:25

2016

OH14.indd 17

17

07-10-16 13:25

Designed and supplied by Frames

Eight filter coalescers and heat exchangers for ENI Zohr Development Project in Egypt

Sample of Heat Exchanger.

Mid August this year Frames from Woerden, a supplier of oil and gas systems and solutions, is awarded a contract

by ENPPI and Belayim Petroleum Company (Petrobel) for the design and supply of eight sour gas filter coalescers and eight shell and tube heat exchangers.

18

OH14.indd 18

2016

07-10-16 13:25

gas streams that require very low liquid content. Frames provides gas filter coalescers with a high efficiency for the removal of very small liquid droplets. Frames is able to combine this technique together with the upstream scrubber vessel, thereby resulting in the optimization of the required plot space and reduced investment costs.

The Zohr field

Furthermore, gas filter coalescers can be equipped with internals that remove solid particles to provide a complete separation solution.

Reducing consumption and costs

The filter coalescers and heat exchangers will be installed at the El-Gamil Plant in Egypt. The plant is connected with the ‘super giant’ natural gas field Zohr. This field is located in the deep offshore of the Mediterranean Sea in the Shorouk Block, which covers an area of 3,765 square kilometres and a water depth ranging from 1,400 to 1,800 metres.

Business Group for Investment (BGI), we were able to provide ENPPI and Petrobel with a technically and commercially attractive offer. It took only 3 months from the request for quotation to the order award,” says Joris Vink, Sales Engineer at Frames Separation Technologies.

Removal of liquid droplets

Gas filter coalescers are applied in The Zohr Gas Field was discovered in 2015 and the goal of ENI, the operator of the field, is to start production at the end of 2017. The field will produce 2.6 billion cubic feet per day by 2019.

This is equivalent to 40 per cent of the total gas production in Egypt today.

Egypt is increasing the gas production in order to erase the natural gas supply shortages.

Shell and tube heat exchangers are applied in fluid streams (gas/oil/ water) that require cooling, condensing, heating, or evaporation.

Frames’ proven units reduce energy consumption and operational costs by efficiently transferring heat from one medium to another. The Frames Shell and Tube Heat Exchangers are designed according to TEMA and API660, and are used in different industries for onshore and offshore applications.

The El-Gamil Plant in Egypt.

One on one contact

With the ENI Zohr Development Project now on the fast track and with the goal to start production at the end of 2017, there is a need to supply the filter coalescers and heat exchangers within a year. “Due to our strongest assets; one on one contact, know-how, teamwork, and close corporation with our Egyptian agent

2016

OH14.indd 19

19

07-10-16 13:25

Door can withstand 0,56 bar blast followed by A60 rated fire

InterDam conducts a ground-breaking door safety test Architectural safety equipment company InterDam recently announced a ground-breaking door safety test. Between July and September, 2016, the company’s engineers subjected their G21 Fire Door to a single sample blast and fire test. The result was an unqualified success.

20

OH14.indd 20

2016

07-10-16 13:25

‘Post-blast, the door was intact and fully operational.’

Paul Goudswaard, R&D Director InterDam

“We have now confirmed that our standard G21 Fire Door can withstand a 0.56 bar blast followed by an A60 rated fire, while remaining structurally sound,” says Managing Director Berend Groeneveld.

Single sample test

The company has performed similar successful tests on walls at their customers’ request. But this is the first time a company has proactively subjected doors to this type of testing, with a Lloyds Register Surveyor on hand to certify that the tests were performed on a single sample.

“A blast event is quite often followed by a fire,” explains Groeneveld.

“But this blast can compromise the door’s ability to protect against this fire. And we were amazed to discover that there are no formal regulations

in place for the certification of doors under these conditions.”

parameters for higher and lower blasts and project-specific door dimensions.

Safety parameters

Industry best practice

The blast test was conducted at the TNO blast testing facilities in Rijswijk, the Netherlands. “Post-blast, the door was intact and fully operational,” says R&D Director Paul Goudswaard.

“It didn’t detach or crack, and there was no damage to the hinges, vision panel, latches or door handle.

It remained a Category One explosionresistant door. During the subsequent fire test, we exposed the door to temperatures up to almost 1000º Celsius for over an hour, and it met or exceeded all safety parameters.”

InterDam now leads the market in this type of testing, and the hope is that it will be a game-changer in terms of awareness and regulatory activities.

“We want to introduce this type of testing and quality as an industry best practice with the hope that it will lead to new regulatory norms,” says Groeneveld. “Our ultimate goal, as always, is to keep staff and equipment safe in hazardous environments.”

The final test results can now be used to calibrate our Final Element Models (FEMs) to approve alternative

InterDam has been supplying architectural items for refineries, oil & gas platforms and offshore wind substations (platforms) since 2007.

The company is based in Ridderkerk, the Netherlands.

2016

OH14.indd 21

21

07-10-16 13:25

Allseas contracted Techno Fysica

Load measurement solutions

Techno Fysica, a global load monitoring solution provider, has been awarded the design, manufacturing and completion of the vessel-specific load measurements for Allseas’ heavy lift and pipelay vessel ‘Pioneering Spirit’.

At our Centre for Measurement Techniques, based in The Netherlands, we designed various customized load measurement solutions which include 51.5 MN capacity shear pin type load cells for the lever pivots of the vessel’s topsides lift system (TLS), as well as structural stress in the hull connection beam, the stinger

22

OH14.indd 22

hang-off supports and the rollerbox forces during pipelaying.

The final deliveries we made for the TLS comprised no less than 18 large forged shaft pieces, each weighing 8 tonnes, for the so-called yoke foundation supports and adapter box.

Techno Fysica also took care of calibration of all load monitoring sensors and systems.

The company always endeavours to meet the required delivery ‘no matter how challenging’.

Technical support is always available.

In the unlikely event of a problem, advice, spares, service or a replacement unit is available at short notice.

2016

07-10-16 13:25

Dutch Pavilion in Hall 11 at ADIPEC 2016

11260 11258 Konon

Roc-Master Piping Solutions

11256 11254

Gouda Pipelife / Refractories Soluforce

11252 11250 Van Beest

HSMA / Winteb

11236 11238 Brooks

11340

Frames Royal IHC

11232 11234 Selmers

Thermo Electric

11230

11338 11334 Control Seal

IRO Lounge

11336 Damen

Astava

11332 11330

Trustlube

Ampelmann

11210

11310 GustoMSC

Boskalis

11312 11212 Stork Mokveld

Company

Booth Number

Company

Booth Number

Ampelmann

11332

Royal IHC

11340

Astava

11336

Selmers

11232

Boskalis International

11210

Stork

11312

Brooks Instrument

11236

Thermo Electric Instrumentation

11234

Control Seal

11338

Trustlube

11330

Damen Shipyards

11230

Van Beest

11252

Frames

11238

Gouda Refractories

11256

(*) Participants in IRO lounge (booth number 11334)

GustoMSC

11310

Aegex Technologies

Holland Marine Services Amsterdam/ Winteb 11250

Blue Offshore

11334

Lumasense Technologies

Kanon Loading Equipment

11258

SecurityMatters

Mokveld Valves

11212

Techno Fysica

Pipelife / Soluforce

11254

Van Heck

Roc-Master Piping Solutions

11260

West-Holland Foreign Investment Agency

IRO lounge (*)

2016

OH14.indd 23

23

07-10-16 13:25

www.aegex.com Aegex Technologies provides intrinsically safe mobile and IoT solutions for hazardous locations in oil and gas, chemical, utilities and other industries with explosive environments.

Aegex10 Intrinsically Safe Tablets are the world’s first Windows 10 tablets to be globally certified for ATEX/IECEx Zone 1 and UL Class I, II, III Division 1 areas.

Aegex Technologies CIC Rotterdam, Unit A4.002 Stationsplein 45, 3013 AK Rotterdam The Netherlands phone +31 (0)10 808 1090 mail contact@aegex.com

Stand 11334 Aegex10 IS Tablets employ industry-specific applications and synchronize with an organization’s Internet of Things, allowing users to access and transmit real-time data from within the most hazardous zones of their operations. Such cloud-based connectivity improves safety, efficiency and compliance and lowers risk, resulting in decreased downtime and optimized operations.

www.ampelmann.nl The global leader in offshore access solutions sets new standards in safety with its motion compensating systems and services.

The vision of Ampelmann is to make offshore access as easy as crossing the street.

The unique Ampelmann systems with fully motion compensating gangways allow safe, efficient and reliable transfers of personnel and cargo from vessels to offshore oil & gas platforms, turbines, F(P)SO’s and all other fixed and floating structures at sea.

Ampelmann Operations B.V. Oostsingel 209 2612 HL Delft The Netherlands phone +31 (0)20 2400 121 mail info@ampelmann.nl

Stand 11332 Ampelmann has offices in Delft, Singapore, Qatar, Brazil, Aberdeen, Brunei and Houston.

More than 3 million people have already walked to work safely on more than 200 projects worldwide.

www.astava.com Since 1956, ASTAVA has been designing and manufacturing instrumentation valves for the Oil and Gas, (petro)chemical industries and nuclear power plants. Throughout its years of vast experience in the field of design, engineering and manufacturing at its fully owned factories, ASTAVA has been able to provide its customers with Instrumentation and safety solutions.

ASTAVA B.V. Industrieweg 30 7944 HS Meppel The Netherlands phone +31 (0)522 237030 mail rfq@astava.com

Stand 11336 ASTAVA has proven that these two concepts go well together in a superb collaboration between its various departments, working closely together in order to design new and improved products. By contacting the commercial staff at an early stage, ASTAVA is able to provide an optimal solution together with the customer. Our service goes beyond delivering instrumentation valves.

www.blueoffshore.com Blue Offshore supports its customers with worldwide transport, storage, field jointing, installation and repair solutions for subsea HV cable, array cable, flexible pipe and umbilicals.

Our solutions include the rental of innovative, modular offshore deck equipment. Our full range of rental deck equipment consists of (basket) carousels, tensioners, reel hub drive systems, reels, loading towers and chutes.

Blue Offshore Laan van Nieuw Oost-Indië 191 2593 BN The Hague The Netherlands phone +31 (0)70 7113774 mail info@blueoffshore.com

24

OH14.indd 24

Stand 11334 Our basket carousels have a modular design for variable product carrying capacities, starting from 1,000 tonnes up to 7,000 tonnes.

In addition, Blue Offshore supports vessel’s deck and equipment engineering, FEM calculations, sea fastening and stability analyses.

We also provide offshore crew.

2016

07-10-16 13:25

www.boskalis.com Boskalis is a leading global services provider operating in the dredging, maritime infrastructure and maritime services sectors.

Boskalis Rosmolenweg 20 3356 LK Papendrecht The Netherlands phone +31 (0)78 69 69 000 mail barbara.neyt@boskalis.com

The company provides creative and innovative all-round solutions to infrastructural challenges in the maritime, coastal and delta regions of the world with services including the construction and maintenance of ports and waterways, land reclamation, coastal defense and riverbank protection.

Stand 11210 In addition, Boskalis offers a wide variety of marine services and contracting for the offshore energy sector including subsea, heavy transport, renewables, lifting and installation and towage and salvage.

Furthermore, Boskalis has a number of strategic partnerships in harbor towage and terminal services.

www.brooksInstrument.com MT3809G VA Flow Meter

Supreme Performance in Extreme Conditions Variable Area

Brooks Instrument B.V. Neonstraat 3 6718 WX Ede The Netherlands phone +31 (0)318 549 300 mail Brookseu@BrooksInstrument.com

Stand 11236

Brooks Instrument - a company of highly trained specialists with 70 years of experience in development and manufacturing of flowmeters.

Serving EPC companies in oil & gas industries all over the world, we have many years of experience with handling projects, project documentation and test requirements.

Our portfolio: Metal Tube & Glass Tube Variable Area Flowmeters, Thermal Mass Flow Meters/ Controllers, Coriolis Mass Flow Meters/ Controllers, Pressure Controllers & Regulators and Vaporizer systems.

Our strength is the ability to produce VA flowmeters for extreme conditions.

Brooks Instrument has manufacturing locations, sales, and service offices in the Americas, Europe, Middle East and Asia.

www.controlseal.nl

Control Seal B.V. P.O. Box 330 9900 AH Appingedam The Netherlands phone +31 (0)596 652 222 mail info@controlseal.nl

Control Seal has a unique design of its products, short lead time, competitive pricing and excellent after-sales support.

With more than 30 years of experience in the valve business and over 100 years in precise engineering, our valves are well known and appreciated by the world leading EPCs and oil and gas companies for its high performance in extreme conditions.

Stand 11338 Its products find application in refineries, molecular sieves, metering skids, tank farms, airports, pipelines and many more.

Main products are Rising Stem Ball valve, Double Block and Bleed valve, Axial Flow valve and 4 Way Diverter valve.

www.damen.com Damen Shipyards Group operates 32 shipbuilding and repair yards and delivers vessels and components in over 100 countries.

Based on its unique, standardised ship-design concept Damen is able to guarantee consistent quality.

Damen Shipyards Group P.O. Box 1 4200 AA Gorinchem The Netherlands phone +31 (0)183 639 911 mail info@damen.com

Furthermore, modular construction, keeping vessels in stock and thorough R&D leads to short delivery times and reliable performance.

Stand 11230 Damen offers a wide range of products, including tugs, workboats, naval and patrol vessels, high-speed craft, cargo vessels, dredgers, offshore vessel, ferries, pontoons and superyachts.

In addition, Damen Shiprepair & Conversion has a worldwide network of 15 repair and conversion yards with dry docks ranging up to 420 x 80 metres.

2016

OH14.indd 25

25

07-10-16 13:25

frames-group.com Frames is the vital link between the well and the pipeline in the international oil and gas industry. We provide a wide range of products and services in three segments: onshore, offshore, and floaters. Together, we design, build and deliver separation technology, oil and gas processing, flow control and safeguarding systems and modules, even integrated solutions such as total plants.

Frames Raoul Wallenbergplein 29 2404 ND Alphen aan den Rijn The Netherlands phone +31 (0)172 464 200 mail info@frames-group.com

www.goudarefractories.com Gouda Refractories successfully designs, manufactures and supplies high grade refractory linings for critical equipment in a broad range of Industries such as: no-ferrous metals, steel, environment & energy, cement, chemical and of course Petrochem.

Gouda Refractories B.V. Goudkade 11 – 16 2802 AA Gouda The Netherlands phone +31 (0)182 5914 78 mail info@goudarefractories.com

www.gustomsc.com The pioneers of offshore engineering GustoMSC is a world-renowned and leading design and engineering company, thanks to the vast knowledge and expertise of our dedicated professionals and close relationships with the most influential players in the offshore energy market.

We serve this industry by providing the best-inclass solutions for mobile offshore units.

GustoMSC BV Karel Doormanweg 35 3115 JD Schiedam The Netherlands phone +31 (0)10 288 3000 mail info@gustomsc.com

www.hmsa.nl HMSA is producer of Biological Sewage Treatment units, Grease Separators, Grey Water tanks and supplier of Vacuum Toilet systems, Fresh Water makers, UV reactors, Oily Water Separators, and Hydrophore units.

Holland Marine Services Amsterdam Vlothavenweg 16 1013 BJ Amsterdam The Netherlands phone +31 (0)20 682 0178 mail info@hmsa.nl

26

OH14.indd 26

Our products are manufactured and assembled in the workshop of our sister company, HORS in Amsterdam under our supervision.

Stand 11238 At Frames we work directly with our clients, one-on-one. Our employees are educated, experienced and qualified with all relevant certificates.

Frames is headquartered in the Netherlands and has 15 offices worldwide.

Stand 11256 Every industry with its own specific challenges.

Whether it’s a greenfield project or maintenance: Gouda Refractories seamlessly matches the design and materials selection to the specific needs of your equipment.

Lifespan, application techniques and reliability are our top priorities focussed on an optimum performance of your equipment.

Stand 11310 Recently we have launched our newly developed OCEAN1600-HE design. This largest unit in our range of Ocean drilling semi-submersibles has been designed for operations in deep water and extreme harsh environments. The Ocean series is characterized by simple construction, high safety margins, high efficiency and superior motion behavior.

Stand 11250 This gives us the advantage of 100% control on quality and guarantee of our products conform our MCA/MED quality control system, as approved and certified by Lloyd’s.

Lloyd’s Type Approval conform MEPC. Resolution 227(64), MCA/MED certificate, Type Approval certificates are accepted by all major Classification Societies.

2016

07-10-16 13:25

www.iro.nl IRO – The Association of Dutch Suppliers in the Oil & Gas Industry

IRO P.O. Box 390 3000 AJ Rotterdam The Netherlands phone +31 (0)793 411 981 mail info@iro.nl

Since its foundation in 1971 IRO has promoted the interests of Dutch supply and service companies in the upstream oil and gas industry.

Members cover all activities involved in the supply industry, such as engineering, field development, pipeline installation, maintenance, manufacturing and material & equipment supply, onshore as well as offshore.

Stand 11334 To promote the qualities of Dutch suppliers in the oil and gas industry, IRO cooperates with national and international organisations with similar interests and spreads information via publications, internet and meetings. IRO also organizes trade missions, seminars, workshops, member meetings and participation in oil and gas exhibitions worldwide.

IRO represents the interests of 440 member companies.

www.kanon.nl KANON Loading Equipment BV is a first-class supplier on the international market for liquid transfer systems. KANON distinguishes itself by designing according to the latest development with regard to efficient design, safety, ultra-low maintenance and operator convenience.

Stand 11258 Following this approach has resulted in a revolutionary, efficient design of marine loading arms for LNG. The product range which KANON offers consists of Marine loading arms, truck loading arms, folding stairs with safety cages, swivel joints and grounding devices.

Kanon Loading Equipment B.V. Edisonweg 27 3899 AZ Zeewolde The Netherlands phone +31 (0)36 5219777 mail info@kanon.nl

www.lumasenseinc.com

Lumasense Technologies GmbH Kleyerstr. 90 60326 Frankfurt am Main Germany phone +49 (0)69 973 730 mail info@lumasenseinc.com

LumaSense Technologies, Inc. is one of the most trusted providers for innovative temperature and gas sensing devices.

Our E2T infrared detection systems for sulfur recovery and flare stack monitoring are well known for years in the petrochemical industry.

With over 1,700 installations in 550 refineries and gas plants LumaSense’s E²T product line is highly recognized for accurate measurements.

Stand 11334 To support customers’ requests Lumasense has established a strong service & selling network with regional partners in the Middle East region.

www.mokveld.com

Mokveld Valves BV P.O. Box 227 2800 AE Gouda The Netherlands phone +31 (0)182 59 75 00 mail info@mokveld.com

Mokveld, experts in engineered valve systems.

For critical control and safety applications in the oil and gas industry. HIPPS, control, choke, check, on-off and surge relief valves custom made for the application. Sizes up to 84” pressure ratings up to 2500# and API 10 000.

Higher ratings upon request. Onshore, offshore and subsea.

Stand 11212 Come to stand 11212 to see the new low shear Typhoon System; a cost efficient way to debottleneck your separation and produced water treatment systems without requiring additional equipment.

2016

OH14.indd 27

27

07-10-16 13:25

www.soluforce.com SoluForce® is the originator and technological leader in the research, development, manufacture, supply and installation of Flexible Composite Pipes (also known as RTP).

The SoluForce® pipe system is completely non-metallic and are completely corrosion resistant. When it comes to making marginal offshore oil and gas fields economically viable, SoluForce pipeline solutions offer a number of

Pipelife Nederland B.V. Flevolaan 7 1601 MA Enkhuizen The Netherlands phone +31 (0)228 355 555 mail info@soluforce.com

www.roc-master.com Roc-Master Piping Solutions - one of the most experienced professional manufacturer of CRA CLAD pipes, flanges, fitting and bends as well as forged flanges in all materials, special subsea forgings, and all types of fasteners, coated bolts and nuts. We also supply Weld Overlay, precisions machining services, as well as prefabrication for clad and nonclad components.

Roc-Master Piping Solutions Horickheide 7 6035 PN Ospel The Netherlands phone +31 (0)495 641050 mail info@eresbv.nl

www.royalihc.com Royal IHC enables its customers to execute complex projects from sea level to ocean floor in the most challenging of maritime environments.

We are a reliable supplier of innovative and efficient equipment, vessels and services for the offshore, dredging and wet mining markets.

Royal IHC P.O. Box 1 2960 AA Kinderdijk The Netherlands phone +31 (0)880 152 325 mail info@royalihc.com

www.secmatters.com SecurityMatters - A premium cybersecurity solutions provider for critical infrastructures.

With more than 15 years of research and experience in the field of network intrusion detection SecurityMatters introduced in 2013 SilentDefense, a completely new approach to successfully secure ICS/SCADA networks.

SecurityMatters BV De Zaale 11 5612AJ Eindhoven The Netherlands phone +31 (0)40 239 0830 mail info@secmatters.com

28

OH14.indd 28

Stand 11254 advantages over steel and other flexible options.

Light, strong, durable and reliable – and with shorter lead times – our pipeline systems are perfect for connecting marginal wells to nearby platforms, so eliminating the need for a new drilling platform.

They are quicker, easier and cheaper to deploy with no welding required, no need for hot permits and no need for specialist pipe-laying barges.

Stand 11260 Furthermore the company is an overall supplier for the total packages used in the onshore, offshore, oil and gas industries, chemical and petrochemical industries. Roc-Master Piping Solutions was founded in 1997, has four production facilities, and more than 260 national and overseas employees.

Stand 11340 With a history steeped in Dutch shipbuilding since the mid-17th Century, we have in-depth knowledge and expertise of engineering and manufacturing high-performance integrated vessels and equipment, and providing sustainable services. With our commitment to technological innovation we strive to continuously meet the specific needs of each customer in a rapidly evolving world.

Stand 11334 Specifically designed for use in industrial control environments, SilentDefense gives end users a tool to simple and effectively operate best-of-class cyber-resilient ICS/SCADA networks.

SilentDefense’ built-in knowledge base and controls has been making worldwide customers more secure and in control.

2016

07-10-16 13:26

www.selmers.com

Selmers B.V. Biesland 3 1948 RJ Beverwijk The Netherlands phone +31 (0)251 211999 mail info@selmers.com

Selmers is a leading international supplier of plants and equipment for internal and external pipe cleaning, coating and for in-process pipe handling. The company has served its customers around the globe for more than 50 years from its headquarter and manufacturing divisions in the Netherlands. Selmers’ customers are mainly active in the pipe coating, pipe manufacturing and onshore and offshore pipeline construction industry.

Stand 11232 Selmers recognizes that the expertise, innovations, services and high quality of its products, are the core strength of its operations.

Based on its ambition, Selmers manages to stay a step ahead in providing new solutions and creating surplus value to its customers.

www.stork.com

Stork Wescon International B.V C1-Al Bateen Commercial Building 9th Floor,Al Bateen Area, 34th Street P.O. Box 636, Abu Dhabi,UAE phone +971 (0)2 632 7678 Extn.511 mail ch.meauh@stork.com

Stork, a Fluor company, maintains, modifies and assures the integrity of production facilities in the oil and gas, chemicals and process, metals and mining, power, and manufacturing industries.

Since March 1 2016, Stork has been part of Fluor Corporation, a global engineering, procurement, fabrication and construction company that designs and builds capital-efficient facilities. The combined organization is uniquely positioned to deliver integrated solutions covering the full asset life-cycle, adding value to the business and strengthening the competitive position of our Clients.

Stand 11312 We offer a wide range of seamless solutions and specialist services across all areas of asset management and maintenance, including Inspection, Engineering and Consulting services, (Advanced) Non Destructive Testing, Heat treatment, Specialized Mechanical Services, Process Equipment services, Rotating equipment maintenance & services as well as Rope Access services. We also maintain and supply products for Power Services & Heat Treatment.

www.technofysica.nl Techno Monitoring, specialized in customized design of load sensors, monitoring systems and software by combining its long-standing experience and advanced engineering technologies.

Techno Fysica BV Aalborg 5 2993 LP Barendrecht The Netherlands phone +31 (0)180 620 211 mail info@technofysica.nl

Solutions for: • Control & Monitoring: load measurements from simple, single axis load sensors to fully computerized measuring and logging systems for tension, compression, bi-directional shearforce, torque/thrust, inclination/ displacement, vibration, temperature, etc.

Stand 11334 • Client specific: static/dynamic response, telemetry, load links, deep sea load sensors • Structural stress measurement and all strain gauge applications. • Troubleshooting and system failure analysis. • Reconditioning of load cells (repair, proofload testing, calibration/ certification, all makes). • Product development and mechanical engineering (FEM calculations).

• Software development (condition monitoring, overload protection, weighing applications) • Measuring of mechanical parameters.

www.te-instrumentation.com Thermo Electric Instrumentation B.V. is the market leader in the development and production of temperature measurement systems.

Thermo Electric Instrumentation B.V. P.O. Box 85 2740 AB Waddinxveen The Netherlands phone +31 (0)85 7607 300 mail info@te-instrumentation.com

Our manufacturing and testing facilities are located in Waddinxveen, the Netherlands, where we engineer and manufacture thermocouples, RTD`s (Pt100) and thermowells for various markets and industries.

Stand 11234 Thermo Electric temperature sensors can be used for measuring, regulating, controlling and calibrating every process with a temperature range from the absolute zero point (-273 °C) up to more than 1250 °C. Our products can be utilized in processes dealing with corrosive chemicals, vibrations, electrical interventions and high pressure.

2016

OH14.indd 29

29

07-10-16 13:26

www.trustlube.com Uptime Starts here TrustLube designs, manufactures, assembles and installs automatic lubrication systems and monitoring systems for the maritime, dredging, offshore and oil & gas industry.

TrustLube B.V. Neon 7 4751 XA Oud Gastel The Netherlands phone +31 (0)88 87 87 700 mail info@trustlube.com

Our skill lies in choosing the exact dosage required for the installation to achieve a sound performance.

www.vanbeest.com Van Beest is the leading supplier of a complete range of accessories for steel wire rope, chain and synthetic rope worldwide. Our Green Pin® and Excel® products – manufactured in Holland and France – are known for their superior quality. Green Pin® shackles comply with many internationally recognized standards and can be supplied with various certificates.

Van Beest B.V. P.O. Box 57 3360 AB Sliedrecht The Netherlands phone +31 (0)184 413 300 mail sales@vanbeest.com

www.vanheckgroup.com Moving water any way you want it Van Heck operates internationally in the field of water movement. With its diversity in pump units, Van Heck operates from dredging, salvage and offshore operations to sewer renovation, cool water applications and compiling emergency plans for flooding. Every operation can be customized to meet the wishes of the client and the project’s demands.

Van Heck Ambachtsstraat 2 8391 VK Noordwolde The Netherlands phone +31 (0)561 431 739 mail info@vanheckgroup.com

www.westholland.nl The West-Holland Foreign Investment Agency assist companies in establishing their business in The Netherlands with a focus on The Hague region.

OH14.indd 30

The method of TrustLube takes care of the continuity of the industrial process and enables installations to achieve significant lubricant savings. Our sustainable TrustLube systems continually prove themselves in the most extreme conditions.

TrustLube can save on your lubricant consumption, extend the lifetime of your equipment and increase your uptime.

For more information, please contact our office.

Stand 11252 The Excel® brand covers a wide range of grade 8, grade 10 and stainless steel hooks and chain components.

Find out more about our new Green Pin® ROV Release & Retrieve shackle: specially designed for efficient lifting with an ROV.

Stand 11334 The launch of Van Heck’s newest innovation, the Sea Trophy, a submersible oil recovery pump (green and easy oil recovery), provide salvagers and the shipping industry with an astute and versatile tool to recover (fuel) oil in all unforeseen situations.

Stand 11334 Please contact Wim Rutgers – International Business Advisor for FDI from West-Holland Foreign Investment Agency (WFIA) for further information.

The Hague is home to large oil and gas operators like Shell, TAQA Energy, Q8, Wintershall, Total, Petrogas, Engie, Dana Petroleum and engineering and oil field service firms such as CB&I, Technip, Schulmberger, Jacobs, Fugro, Heerema, Allseas and SBM offshore.

Wim Rutgers P.O. Box 16067 2500 BB The Hague The Netherlands phone +31 6 24 75 66 933 mail w.rutgers@westholland.nl

30

Stand 11330

2016

07-10-16 13:26

www.winteb.com

Winteb B.V. Parallelweg 1 9672 AW Winschoten The Netherlands phone +31 (0)597 412 252 mail info@winteb.nl

WINTEB ‘THE ORIGINAL’: world’s best Air Pipe Heads, for following reasons: - Made of seawater resistant Aluminium (German DIN1725) - Non corroding - Maintenance free - Smallest + lightest design in the world - Best leakage protection - Cost saving - No suction blocking, due to patented HIAS technology - High volumetric flow

Stand 11250 - 10 years guarantee, if fitted according to instructions - Type approved by all mayor classification societies - Well established and reliable product - In-depth knowledge, 60 years of experience - Shortest delivery time, due to in-house foundry Newest development: Only producer in the world with type approval No. 5249/2016 (ILENT), according to regulations described in IMO circ.letter 3573 (‘watertight’ product-APF).

2016

OH14.indd 31

31

07-10-16 13:26

INTEGRATED PERFECTION FROM BOW TO STERN

With many decades of experience in the maritime and offshore industry, our vessels are designed with maximum efficiency in mind. Our new signature offshore vessel design combines the renowned transformation of functional requirements into optimal performance with contemporary, safe and comfortable Dutch design.

ROYALIHC.COM /SIGNATUREDESIGN

OH14.indd 32

07-10-16 13:26