CIBSE
GUIDE TO BUILDING PERFORMANCE
2019
www.cibse.org
HELPING CLIENTS DELIVER BUILDING PERFORMANCE
Improve your EPC rating Save up to 35% costs Reduce carbon emissions How we can help A range of boilers and water heaters to match every building A team of experts you can rely on Long-term support with spares and service Hamworthy Heating – a British commercial boiler manufacturer and hot water specialist trusted for over 100 years.
Talk to us today: 01202 66 25 00 sales@hamworthy-heating.com hamworthy-heating.com
For the
Multi-Service
Optimal
Chilled
Indoor
Working
Beams
‘Plug n Play’ Lighting Electrical Connection Heating Circuit Return Connection Cooling Circuit Return Connection Overpipe Connection
Environment
Removable Top Side Cover
Cooling Circuit Flow Connection Heating Circuit Flow Connection Air Supply Connection
Emergency LED Indicator PIR Sensor Sprinkler Pipework Heat Exchanger Battery Sprinkler Head
Perforated Underplate
Key Benefits of MSCB’s • • • • • • • • •
Lighting via LED Boards Concealed in Diffuser AMDV (Air Management Discharge Vanes)
PA/VA Speaker Bullnose Polycarbonate Diffuser Smoke Detector
Ideal where floor-to slab height is minimal Low running costs - minimal maintenance requirements as there are no moving parts or filters Long life expectancy 100% recyclable and no refrigerant to dispose of Delivers many services in a single unit - so reducing on-site installation time Optimum levels of occupancy thermal comfort, energy efficiency and indoor air quality Beam aesthetic can be customised to client requirements 100% factory tested services delivered ‘Plug n Play’ to reduce on-site commissioning time Low noise rating
Frenger’s Active Multi-Service Chilled Beams (MSCB’s) are able to offer the highest Thermal Comfort by achieving Coanda effect at as low as 15Pa static beam air pressure. This allows Frenger’s active MSCB’s to induce room air into the heat exchanger providing greater cooling without dumping cold air directly into the occupied space. For further information on Multi Service Chilled Beams or to learn about our other product ranges please visit www.frenger.co.uk CIBSE Approved CPD for Chilled Beams
Smoke Control
Colt International is the market leader in the provision and servicing of healthy, comfortable and safe working conditions in the built environment. We specialise in the design, manufacture, installation and servicing of life safety and environmental comfort systems, and pride ourselves on our expertise built on proven experience, which delivers innovative, cost effective and sustainable solutions.
Climate Control
Louvre & Shading
Colt People Expertise built on proven experience Service
www.coltinfo.co.uk | info@coltinfo.com | 02392 451111
FOREWORD
Welcome to the CIBSE Guide to Building Performance CIBSE is delighted to introduce this new Guide which reflects the increasing demand from building users for safe, healthy and efficient buildings which meet the needs of those who occupy them. This demand to demonstrate better building performance includes health and wellbeing as well as carbon, energy and waste reduction. The Guide is also designed to be a valuable source of information for companies and those responsible for the operation and maintenance of buildings to guide them through the complexities of complying with relevant regulation and legislation, including ESOS. The Guide will help to source the products and services that enable clients to operate their buildings efficiently and effectively. It will help them to meet the corporate social responsibility requirements and health and wellbeing standards demanded today by their stakeholders, staff and customers, and to comply with mandatory reporting requirements. The editorial content of this Guide is therefore aimed at client managers who are responsible for the operation and maintenance of buildings, including operations, facilities, maintenance and premises managers and also those responsible for investment in the sustainability of buildings. We have supplied links throughout the Guide for users to obtain additional information and hope, therefore, that this Guide will provide a useful service for all those who receive and use it. We would welcome feedback on how we can improve it further.
Rowan Crowley Managing Director CIBSE Services Ltd
WWW.CIBSE.ORG
About CIBSE
CIBSE (the Chartered Institution of Building Services Engineers) received its Royal Charter in 1976 and is the standard setter and authority on building services engineering. It publishes Guidance, Information, Data and Codes which are internationally recognised as authoritative, and sets the criteria for best practice in the profession. Its technical guidance sets standards to support the building services supply chain in the UK – from engineers and contractors to clients and facilities managers. The Institution speaks for the Building Services profession and wider supply chain and is consulted by government on matters relating to construction, engineering and sustainability. It is represented on major bodies and organisations which govern construction and engineering occupations in the UK, Europe and worldwide. CIBSE is a pioneer in responding to the threat of climate change: buildings account for almost 50% of damaging carbon emissions, yet innovative services design can bring dramatic improvements in energy efficiency and reductions in carbon emissions.
About CIBSE Certification Ltd CIBSE Certification is a wholly owned subsidiary of CIBSE. Its aim is to support the values and objectives of CIBSE by providing certification services for the property industry and the wider supply chain. Full details of the services provided by CIBSE Certification are given in this Guide. CIBSE Certification provides an independent certification body for the approval of personnel, specifically LCCs and LCEAs. A number of CIBSE Certification streams are UKAS (United Kingdom Accreditation Service) accredited and audited regularly. Its Consultants, Assessors, Advisors and Inspectors are widely recognised for their extensive experience in the sustainable building industry, and include: • Low Carbon Consultants (LCCs) • Low Carbon Energy Assessors (LCEAs) • Energy Performance (EPC) and Display Energy Certificate (DEC) Assessors • Air Conditioning Inspectors (ACIs) • ESOS Lead Assessors • Section 63 Advisors (in Scotland) • Heat Networks Consultants
CIBSE GUIDE TO BUILDING PERFORMANCE 2019 |
5
CONTENTS
10
Contents 8 Helping clients deliver Building
24 Ideal Commercial heats world’s
10 Guide to the Energy Savings
26 CIBSE + UKAS = Quality assured
Performance
Opportunity Scheme (ESOS)
14 Energy Performance
Certificates for commercial buildings
16 Wellbeing in building design & operation
18 The Importance of Post Occupancy Monitoring
19 Utilize all the available energy — Heat recovery
20 Creating comfort 22 Altecnic ensures energy
efficient district heating system for new London apartments
6
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
first joint faith school
29 CIBSE Certification approved by UKAS to certify to ISO 9001
30 Air Conditioning Inspections
40 Everything FMs need to know 41 The Minimum Energy Efficiency
Standards (MEES) Would you buy an F rated fridge – or rent an F rated building?
42 Panasonic fits the bill for Major Retailer’s London Head Office
32 Preventing corrosion by
44 Rethinking collection of data for
34 Why your FM has more influence
46 Collaboration central to CPD
35 Display Energy Certificates for
48 Non-domestic Energy Performance
36 Indoor air quality – A certified
50 Underground Thermal interference
38 Is there a WISE way to deliver a
52 ISO 50001: effective management
continuous monitoring
on your health than your GP
public buildings
step towards sustainability
quality indoor climate?
energy upgrades
success
Certificates
in Ground Source Systems
of your energy use
CONTENTS
29 Published in 2019 by: CIBSE 222 Balham High Road London SW12 9BS t +44 (0)20 8675 5211 w www.cibse.org While every effort is made to ensure the accuracy of the articles included, the company cannot accept liability for loss or damage arising from the information supplied. The opinions expressed do not necessarily represent or reflect the views of CIBSE or the publisher.
59
54 DE6.1: Cyber security in building services design
55 The competency conundrum in maintenance engineering
56 CIBSE Heat Networks Consultants
59 The Grand Challenges for 2019
62
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form, by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the copyright owners. The publisher gratefully acknowledges the support of the firms whose advertisements appear in this publication. While every care has been taken in compiling this publication, the publisher cannot accept responsibility for any inaccuracies, or for the products or services advertised.
62 CIBSE training - Take control of your development
64 Honeywell Advanced Detection
– Adding smoke detection to building refurbishment projects
66 Smoke control systems – competency is key
Advertising sales and production by: Open Box M&C Regent Court, 68 Caroline Street Jewellery Quarter, Birmingham B3 1UG t +44 (0)121 200 7820 e inside@ob-mc.co.uk w www.ob-mc.co.uk
69 CIBSE Certified Assessors and Consultants - Find an Assessor near you!
WWW.CIBSE.ORG
CIBSE GUIDE TO BUILDING PERFORMANCE 2019 |
7
INTRODUCTION
Helping clients deliver Building Performance CIBSE Certification Ltd. is the wholly owned subsidiary of the Chartered Institution of Building Services Engineers (CIBSE), and its purpose is the operation of an independent certification body for the certification of personnel and management systems.
C
IBSE Certification is fully independent of CIBSE in terms of its governance, and has policies and procedures in place to ensure all aspects of its activities are carried out in an honest, impartial and unbiased manner that is fair and equitable for all applicants. This includes meeting all legislative and statutory requirements that affect the schemes. CIBSE Certification is accredited for a number of streams by the United Kingdom Accreditation Service (UKAS) for personnel certification and for management systems certification to ISO 50001 and 9001.
order to meet challenging energy, carbon and waste reduction targets in the built environment. It is equally important for building users to understand how to operate their buildings efficiently in order to facilitate energy awareness and good practice whilst ensuring optimum performance. CIBSE Certification certifies personnel that can provide a robust, impartial source of knowledge and guidance in the design and operation of energy-efficient buildings. They are widely recognised for their extensive experience in the sustainable building industry, and include:
• Low Carbon Consultants (LCCs), • Low Carbon Energy Assessors (LCEAs), • Energy Performance (EPC) and Display Energy Certificate (DEC) Assessors
• Air Conditioning Inspectors (ACIs), • ESOS Lead Assessors, • Heat Networks Consultants • Section 63 Advisors (in Scotland) We offer technical support, software support, entrance to CIBSE LCC, LCEA and ESOS Lead Assessor registers, on-going marketing of assessors and competitive rates for lodgements, along with international recognition and quality assurance.
Energy management systems Having obtained UKAS accreditation to certify Energy Management Systems against ISO 50001 in 2015 CIBSE Certification has now obtained UKAS accreditation for ISO 9001 accreditation and has applied for ISO 14001. ISO 50001 establishes a standard for operating an energy management system to help organisations improve their energy performance. This could help reduce energy costs and associated CO2 emissions. Energy management systems certified under UKAS accreditation is also one way to comply with the ESOS Regulations. The addition of ISO 9001 and ISO 14001 will allow CIBSE Certification to support organisations operating a system of integrated management systems for optimum business performance.
Why become certified with CIBSE Certification? There is an increasing demand to ensure that our buildings are constructed and operated as efficiently as possible in
8
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
“CIBSE Certification is accredited for a number of streams by the United Kingdom Accreditation Service (UKAS) for personnel certification and for management systems certification to ISO 50001 and 9001.”
INTRODUCTION
Helping clients Essentially, CIBSE Certification helps clients to minimise the carbon footprint of their buildings and meet their corporate social responsibility aims by doing more than simply ‘counting carbon’. And becoming certified with CIBSE Certification gives industry practitioners a distinct advantage in a competitive market.
What are the legislation requirements? • Since 2008, every building that is constructed, sold or rented in the UK requires an Energy Performance Certificate (EPC). This provides an Asset Rating, along with A-G energy efficiency grade for the building. It gives prospective buyers or tenants useful information on energy efficiency and carbon emissions.
A DEC comes with an Advisory Report that details how the building could be operated most energy efficiently in its first year of operation. This must be updated every seven years and does not have to be displayed in the building.
What can a Low Carbon Consultant (LCC) do?
A DEC and Advisory Report have been required for public authority buildings over 500m2 since January 2013, and from July 2015, buildings over 250m2 were included. DECs for buildings of 250-1000m2 have a 10 year validity.
• Advise on energy efficiency and
• In 2016, The Scottish Government introduced the Assessment of Energy Performance of Non-Domestic Buildings (Scotland) Regulations 2016, which created the Section 63 Advisor role.
• An Air Conditioning Inspection Report • Buildings over 250m2 that are owned or operated by a public authority and used by the general public require a Display Energy Certificate (DEC). This shows the actual energy usage and carbon emissions of the building to inform visitors and raise awareness, and must be displayed in a prominent place. A DEC is required annually for every public building over 1000m2.
• Certify that a completed building meets the carbon emissions requirement of Part L conservation
• Advise on and design low carbon and renewable technologies
• Use passive design technologies to make best use of shade and natural ventilation
• Deliver information to ensure a building is managed effectively and that it maintains optimum performance after handover An LCC Energy Management System specialist can:
produced by a certified inspector is required for air conditioning systems over 12kW (previously only for systems over 250kW in 2009). Lodgement of air conditioning inspection reports became mandatory in April 2012.
• Assist clients in the implementation of an
• In June 2014, the Department of Energy
• Suggest and implement cost-effective
and Climate Change (DECC) published the Energy Savings Opportunity Scheme (ESOS) Regulations 2014 to help the UK meet its requirements under Article 8 of the EU Energy Efficiency Directive. ESOS is a mandatory energy assessment scheme for organisations in the UK that are classified as large enterprises or are part of a large group enterprise. According to the government, the scheme will identify thousands of energy-saving initiatives in buildings, industrial activities and transportation, which could save organisations more than £31bn between 2015-2030 if all recommendations in the ESOS reports are carried out.
The CIBSE Low Carbon Consultant (LCC) CIBSE LCCs are recognised industry experts that help reduce the energy costs and carbon emissions of buildings by looking at their current and future performance. Once the relevant LCC assessment has been passed, certified candidates can join the CIBSE LCC Register for Design, Operation, Simulation or Energy Management Systems.
WWW.CIBSE.ORG
An LCC design specialist can:
Energy Management System in conformity with ISO 50001 An LCC building operation specialist can:
• Reduce a building’s energy costs energy efficiency improvements to an existing building
• Incorporate low carbon and renewable technologies
• Advise on how to develop a corporate social responsibility agenda An LCC simulation specialist can:
• Ensure accurate and complete carbon emissions calculations for compliance with Criterion 1 ADL2A
• Provide the necessary calculations for developing an EPC
CIBSE ESOS Lead Assessor ESOS regulations require that ESOS Lead Assessors are sourced from approved existing schemes run by professional bodies, such as the CIBSE Low Carbon Consultants Register. All CIBSE ESOS Lead Assessor applicants must therefore be registered as a CIBSE LCC. ■ To learn more about CIBSE Certification or find an Assessor, Consultant or Inspector on our Online Register, please visit: www.cibsecertification.co.uk
CIBSE GUIDE TO BUILDING PERFORMANCE 2019 |
9
ESOS
Guide to the Energy Savings Opportunity Scheme (ESOS) On 26 June 2014, the Department of Energy and Climate Change (DECC), now incorporated with BEIS, published the Energy Savings Opportunity Scheme (ESOS) Regulations 2014 to help meet the UK’s requirements under Article 8 of the EU Energy Efficiency Directive.
ESOS participants must:
E
SOS is an energy assessment scheme that is mandatory for organisations in the UK that are classified as large enterprises or are part of a large group enterprise (follow the flow chart to the right to identify if your organisation qualifies). According to the government, the scheme will identify thousands of energy- saving initiatives in buildings, industrial activities, and transportation, which could save organisations more than ÂŁ31bn between 2015 and 2030 if all the recommendations in the ESOS reports are carried out.
What do organisations need to do to comply with ESOS? The scheme requires qualifying organisations to undertake assessments looking at energy use and energy efficiency opportunities across the whole business at least once every four years.
10
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
1
Measure total energy consumption Measure total energy consumption across buildings, transport and industrial activities.
2
Conduct energy audits to identify costeffective energy efficiency recommendations Ensuring that at least 90% of total energy consumption is covered by an ESOS compliant energy audit, a Display Energy Certificate, a Green Deal Assessment, or that 100% of energy use has a certified ISO 50001 Energy Management System.
ESOS
Unless total energy consumption is covered by a certified ISO 50001 Energy Management System, organisations must ensure that its ESOS Assessement is conducted or reviewed by a qualified Lead Assessor.
3
Report compliance to the Environment Agency Notify the Environment Agency (as the scheme administrator) that they have complied with the scheme by 5 December 2019. Important to note: The ESOS report has to be signed off by a board member of the organisation being audited and approved by a Lead Assessor. There is no legal obligation for organisations to carry out the report’s recommendations. However, CIBSE advises that organisations entering this process with the intention of acting on recommendations with a sound economic case, will get far more out of the exercise than simply legal compliance. The money saved by acting should, in most cases, cover the cost of compliance. The scheme compliance bodies* will have the authority to apply civil penalties against an organisation found to be required to participate in ESOS and be non-compliant. *Environment Agency in England, Natural Resources Wales, Northern Ireland Environment Agency, The Scottish Environment Protection Agency (SEPA)
Timetable: Phase 2 The first compliance deadline was 5 December 2015. The second compliance phase lasts from 6 December 2015 to 5 December 2019 and the qualification date for eligible organizations is 31 December 2018. Important to note: The data used for ESOS Energy Audits must: • Cover a period of 12 consecutive months data on energy use
• Begin no earlier than 12 months before commencement of the compliance phase (i.e. 6 December 2014)
• Begin no earlier
CIBSE’s major focus is on the energy performance of buildings and CIBSE Certification Ltd was one of the first professional bodies to be approved by the Environment Agency to operate a register of ESOS Lead Assessors. CIBSE Certification can also provide assessors with experience in other sectors (industrial activities and transportation) which means you can find a suitable ESOS Lead Assessor whatever your energy mix.
“ESOS is an energy assessment scheme that is mandatory for organisations in the UK that are classified as large enterprises or are part of a large group enterprise. The scheme will identify thousands of energy- saving initiatives in buildings, industrial activities, and transportation, which could save organisations more than £31bn between 2015 and 2030.”
than 24 months before the commencement of the first ESOS Energy Audit that the participant undertakes within the compliance phase (i.e. an Energy Audit undertaken on 1 April 2019 must begin no earlier than 1 April 2017)
• Not extend beyond the 5 December 2019
WWW.CIBSE.ORG
How to find a CIBSE ESOS Lead Assessor
Organisations can be confident using CIBSE Certification registered ESOS Lead Assessors, as they:
• are recognised by the Environment Agency as eligible to perform ESOS audits, • have at least two, and typically more than four years, relevant experience in addition to the qualifications they hold, • are trained to provide high quality information.
To discuss how ESOS may affect your organisation and to find out more about how we can help you to comply, contact a CIBSE ESOS Lead Assessor today: Find an assessor near you: www.cibsecertification.co.uk/online-register
CIBSE GUIDE TO BUILDING PERFORMANCE 2019 |
11
GEBERIT MAPRESS CARBON STEEL
TREAT IT WELL AND IT WILL TREAT YOU TO TOTAL PEACE OF MIND. IN
ST
N•T
G • MA I NT E
TIO LA
NA
N
NING •
AL
C
PLAN • E
IN
ST
•S
TO R
A G E • CO
MM I
TIO LA
S
G • MA I NT E NIN N
AL
A
ANSPOR
SI
T
ANNING •
OR
IN ON
R ANS P
NC
PL E•
N • TR
T
SI
O
ANS
PO R
•S
TO R
AG E •
CO M M
IS AN
NING •
I NS
T
N
NTEN
PLAN
T IO LA
geberit.co.uk
E
•
AL
C
Specifying and installing system solutions is like everything else in life. For great results, all you need to do is follow good practice. That’s why, in project after project, time after time, Geberit Mapress Carbon Steel is resistant to degradation and a cost effective solution of choice. Quick and easy to install, with no hot works or costly one-hour cooling down period, our precision pipe fitting solutions offer leak-free, hassle-free performance, with a long system life.
GEBERIT MAPRESS CARBON STEEL
AVOIDING ACCELERATED CORROSION OF CARBON STEEL PIPES When the price of copper reached an all-time high in 2011, it signaled a shift within the industry towards precision carbon steel pipework. Durable, proven over many years and more cost-effective than stainless steel and copper (subject to copper prices), it also offers the added benefits of press-fit installation. Like any material, however, precision carbon steel comes with its own considerations. It is only suitable for specific applications,
WHY SWITCHING IS NOT THE SOLUTION
COMMISS • NING • I AN
T GE • P T L RA
It should not be installed outside buildings without adequate protection, in open systems or with excessive water treatment – all of which were reportedly evident when carbon steel sales grew faster than application and design knowledge in the post-recession period of economic activity.
GOOD PRACTICE GUIDELINES To help overcome this issue, Geberit has launched a new white paper focusing on how to prevent excessive corrosion of carbon steel pipes. One thing is clear; where corrosion of precision carbon steel has been detected, the tube is not the cause of failure. If there is significant corrosion, then the system, installation or usage of that pipework is not correct.
NG • I N NI S O AINTENA M
For some contractors and installers, particularly since the sharp 2016 fall in copper prices, switching materials has been perceived as the easiest and most convenient way to address any potential corrosion issues. However, basic corrosion science highlights a significant flaw with this approach.
namely in closed water systems - where dissolved oxygen levels are lower than open systems - with closed expansion tanks and appropriate de-aeration where required.
In fact, switching material to stainless steel, or other tubes which meet the obsolete British Standard that most people know as BS 1387:1985, will only move the problem within a system of mixed pipework materials.
N
TION LLA TA E • S TO • C
Download Geberit’s white paper: Best practice guidelines to eliminate the corrosion of precision carbon steel, for free at www.geberitmakeitright.com
THERE ARE SIX SIMPLE STEPS TO GOOD PRACTICE: 1. PLANNING:
5. TESTING:
Systems should be designed as a closed system with a closed expansion tank and the ability to purge any air – and look out for continuous under or over pressure in the system.
Should be completed with compressed air where feasible but if performing a pressure test with water, the recommended water quality should be used and the system should be left filled where possible. Once installed, fill the system once with the required water quality for commissioning and leave it filled. Completely remove air from the system and do not empty commissioned systems again.
2. TRANSPORT: Use a closed or well covered means of transportation to reduce the risk of moisture reaching the material.
3. STORAGE: Ensure you store pipes and fittings in a dry environment, preferably not on the floor. Carbon steel can be stored in contact with other materials in dry conditions but if there is a chance of moisture during storage, contact with other metals should be avoided.
6. MAINTENANCE: If you must empty an already running system, refill as quickly as possible – within 24 hours at most. It is also important to maintain an effective and ongoing water monitoring programme too.
4. INSTALLATION: Follow the plan; install pipework in accordance with specifications and apply insulation and coatings as stated.
“Precision carbon steel is durable and cost effective, but system design must be taken into account to reduce the risk of corrosion (as with any metal pipes). By following best practice guidelines, and being mindful of everything else that is in the system, contractors can reduce the risk of corrosion and protect the system and the wider project.”
ANTONY CORBETT PRODUCT MANAGER – PIPING SYSTEMS, GEBERIT
ENERGY PERFORMANCE
Energy Performance Certificates for commercial buildings An Energy Performance Certificate (EPC) is required for every commercial building when it is constructed, sold or let. This certificate gives information about the energy efficiency of the building to owners, prospective buyers and tenants.
E
PCs are produced using standard methods and assumptions about energy use to enable the energy efficiency of buildings of the same type to be compared. They are valid for ten years but must be renewed if modifications to the property are made.
An EPC sets out the energy efficiency grade of a commercial building. EPCs are required when a commercial building over 50m2 is built, sold or rented. There are two grades of buildings under the EPC requirements which relate to the complexity of the building being assessed and will affect the type of EPC assessor you will need.
• A simple building is one having “frequently occurring characteristics” such as simple heating systems, simple natural ventilation and small comfort cooling systems - those which are very similar to domestic premises in the fabric and services present, such as a block of shops with flats above them. These buildings are commonly going to be assessed by a Level 3 assessor using SBEM but they can also be assessed by a Level 4 assessor using SBEM or even a Level 5 assessor using DSM.
• A complex building is one having advanced features which can be calculated using SBEM or DSM by a Level 4 or 5 assessor respectively. A Level 4 assessor using SBEM is expected to have experience of buildings in the commercial sector, which may have both fabric and services installations that are not found in domestic buildings, i.e. any HVAC systems. A Level 5 assessor using DSM is expected to have experience of buildings in the commercial sector, which may have both fabric and services installations that are uncommon for which the asset rating is best measured using dynamic simulation.
14
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
What an Energy Performance Certificate (EPC) contains The EPC has two parts - a graphic rating and a recommendations report. The rating is calculated on the performance of the building and its building services (such as heating, lighting, air conditioning), rather than the appliances within it. This is known as an asset rating - that is, how energy efficient the building has been designed and modified.
The certificate also gives an indicator of the potential rating of the building if all the cost-effective measures suggested in the recommendations are carried out. A building’s rating will vary depending on the age, location, size and condition of the building, which are taken into account.
ENERGY PERFORMANCE
“EPCs are produced using standard methods and assumptions about energy use to enable the energy efficiency of buildings of the same type to be compared. They are valid for ten years but must be renewed if modifications to the property are made.” To produce an EPC the assessor will need information on the following:
• • • • • • • • • • • •
The size of the building and the different activity areas within it
Insulation levels in the building The systems providing heat to your building How fresh air moved around the building What keeps the building cool
How hot water is provided to bathrooms and kitchens Building management systems or controls
Electricity feed for the building Lighting systems for the building Presence of onsite energy generation How the building is used and by whom The more complete the information on these areas the more accurate the rating and recommendations are likely to be.
If you need an Energy Performance Certificate for your building, CIBSE certified Low Carbon Energy Assessors (LCEAs) can provide one. CIBSE certified Low Carbon Energy Assessors (LCEAs) have undertaken additional training so that, not only are they able to provide you with an energy performance certificate, they can also provide tailored advice to help you cut the energy costs and carbon emissions in your buildings. CIBSE certified LCEAs are not necessarily members of the Chartered Institution of Building Services Engineers (CIBSE). Energy Performance Certificates must be produced by a certified EPC energy assessor. To find a CIBSE Certification certified EPC energy assessor in your area search our Register of Low Carbon Energy Assessors.
Useful Energy Performance Certificate Documents Further information on EPCs can be found in the downloadable documents below:
• A Guide to Energy Performance Certificates for the Construction, Sale and Let of Non-dwellings (MHCLG)
• Local Weights and Measures Guidance for Energy Certificates and Air Conditioning Inspections for Buildings (MHCLG)
• Example Commercial EPCs and Renting - A Tenant’s Guide (MHCLG). ■ For more information about DECs and to search our online register for a CIBSE certified EPC Energy Assessor in your area, visit: www.cibsecertification.co.uk/epc
CIBSE GUIDE TO BUILDING PERFORMANCE 2019 |
15
HEATING SYSTEMS
Wellbeing in building design & operation During the last decade the industry has quickly evolved to tackle climate change, energy and carbon reduction - this mindset is now established and engrained as ‘part of the day job’ for building designers and operators.
“Internal environments which are thermally comfortable all year round, flooded with fresh air and making the best possible use of natural light will inevitably produce a greater sense of wellbeing and improve our experiences.” 16
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
T
he WELL Building Standard is the first of its kind to focus on strategies to support environments designed to enhance health and wellbeing. The standard targets our main body systems which enable humans to live, learn and work, grouped into 10 main concepts (Air, Water, Nourishment, Light, Movement, Thermal comfort, Sound, Material, Mind and Community) The benefits of each intervention are evidenced by a solid body of scientific work designed to have a small positive impact on our human experiences. The recent release of v2 of the standard offers the perfect opportunity to get on board with the WELL movement and really make positive changes to the buildings we occupy with alternative schemes such as FITWEL and the BCO Wellness Roadmap for Offices offering different pathways to achieving the same outcome – better buildings for us all.
Whichever route you choose, full or partial assessment, ‘in principle’ measures incorporated into new projects or refurbishments; this will certainly be a differentiator for your organisation, helping attract and retain happy and productive staff. Businesses typically spend up to 90% of their overhead costs on salaries and benefits, around 9% for rent & operations and 1% for energy. It therefore follows that the space we create for employees should be focused on getting the best out of the people we invest in. As building designers and operators, we can influence human environments for the better through the adoption of WELL concepts – for example, the Mind concept not only looks to support mental health (which affects 30% of adults during their lifetime & costs the global economy an estimated $1tn annually) but also seeks to create a positive environment by offering access to nature and advice on strategies to enhance a positive state of mind. The concept also looks at support programs to discuss mental health relating to sleep, stress and substance use. A theme running through the Movement concept is the promotion of activity at work with the introduction of active furnishings, improved ergonomics and alternative breakout areas. Using stairways, offering fitness classes and encouraging active commutes via walking running and cycling are all enhancing fitness and activity - the increased interactions this brings with fellow workers will also foster a sense of community and team spirit. Internal environments which are thermally comfortable all year round, flooded with fresh air and making the best possible use of natural light will inevitably produce a greater sense of wellbeing and improve our experiences. Building designers, Architects, MEP Engineers, Building Physicists and Lighting Designers all play a pivotal role in getting it right on the drawing board, but will space churn and layout changes have potential unintended consequences for the users? Maintaining a WELL certification will involve continuous monitoring and validation of these key indicators to ensure building performance right through the lifecycle. In summary, the wellbeing movement continues to stir up considerable interest amongst building professionals - we firmly believe that adoption of the principles for the next generation of building design can only have positive impacts for us all. ■
Architectural louvres for your building’s ventilation needs
RSH-5700 - Class A up to 3.0m/s Installed at Met Office, Exeter
www.c-sgroup.co.uk/CIBSE T: +44 (0)1296 652800
At CS we’ve been designing, manufacturing and supplying louvres globally for over 60 years. From rain defence options, which are highly effective at stopping wind driven rain whilst allowing essential flow of air in and out of the building, to ventilation louvres providing high levels of airflow. We offer solutions to meet the performance needs of most projects.
HEATING SYSTEMS
The Importance of Post Occupancy Monitoring As the old adage goes, “no news is good news.” But is this the case when it comes to building construction?
C
ontact with occupants is often performed post occupancy; however, if we take a new-build school as an example, are end users – the teachers 2 and children – really going to know what CO2 levels of 1500pm or internal temperatures of 25°C really feel like? Probably not and yet the industry is expecting these endusers to be able to identify when these figures are out of the regulatory limits and
actively feedback complaints. This is an almost impossible task for someone who has no knowledge of what to look for. Poor Indoor Air Quality (IAQ) can be very detrimental to occupants of a building, especially high levels of CO2 in spaces such as classrooms. High CO2 levels are proven to cause tiredness amongst children, in turn effecting productivity and
“High CO levels are proven to cause tiredness amongst children, in turn effecting productivity and concentration, while a well-ventilated space is proven to increase child cognition by 61%.”
concentration, while a well-ventilated space is proven to increase child cognition by 61% (Harvard and Syracuse Universities, 2017). This begs the question: is the industry designing buildings around regulations, or around end-users; and is there a difference? As part of service agreements many companies demand that contractors carry out site inspections a few months after completion to see if there are any issues, however this is still not the industry norm. Considerations such as BREEAM, Soft Landings and The Well Standard insist on more input from the end user, but until these are a standard through the construction industry, we will never truly be able to monitor wellbeing of a building’s occupants. ■
NOT ALL HYBRIDS ARE A GOOD IDEA… … but with the XBOXER Hybrid you get the best of both worlds. Our hybrid solution delivers the reassurance of our market-leading mechanical expertise and all of the benefits of a natural solution. Technology tested and trusted. NUAIRE. FOR THE COMPLETE VENTILATION SOLUTION. T 029 2085 8504 E HYBRID@NUAIRE.CO.UK W NUAIRE.CO.UK/HYBRID @NUAIREGROUP
15058_NUAIRE_HYBRID_CIBSE_HP_AD.indd 1
18
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
13/03/2019 14:08
SECTION TITLE
Utilize all the available energy — Heat recovery Utilize the high-temperature energy of superheated refrigerant gas Industrial refrigeration systems with air-cooled condensers waste energy by emitting condensation energy to the ambient air. By installing a desuperheater, much of this waste energy can be converted to hot water, with a wide range of applications. Brazed Plate Heat Exchangers (BPHEs) are an integral tool that allow extra heat to be extracted from the refrigeration system. A BPHE, called a desuperheater, is inserted between the compressor and the condenser. This enables the BPHE to extract the heat from the gases or liquids before Utilize the high-temperature energy of superheated refrigerant it goes into the condenser to be condensate (the liquid collected by condensation).
Utilize all the available energy — Heat
Utilize all the available energy Installing a BPHE helps — Heat recovery
Industrial refrigeration systems with air to increase efficiency levels towaste energy by emitting condensat achieve the demanding recent EU Ecodesign Directive thatambient air. By installing a desuperhe Utilize the high-temperature energy cover high temperature process chillers. Evaporators canwaste energy can be converted to hot of superheated refrigerant gas operate at a range of temperature levels to meet the requiredrange of applications. ndustrial refrigerationfor systems with air- of refrigerants. demands a variety cooled condensers waste energy by emitting Brazed Plate Heat Exchangers (BPHEs) condensation energy to the ambient air. BPHEs offer copper brazing as standard but also stainlessthat allow extra heat to be extracted fr By installing a desuperheater, much of this waste energy be converted hot water, steelcan and nickeltoas alternative brazing materials to meet thesystem. A BPHE, called a desuperh with a wide range of applications. between the compressor and the conde demands for various corrosive fluids. Brazed Plate Heat Exchangers (BPHEs) the BPHE to extract the heat from the ga are an integral tool that allow extra heat to be it goes into the condenser to be condensate (the liquid collected by conde extracted from the refrigeration system.
I
A BPHE, called a desuperheater, is inserted BPHEs offer copper brazing as standard Highly efficient production units in between the compressor and the condenser. but also stainless steel and nickel as Sweden, the USA, Malaysia, Slovakia, and Installing a BPHE helps to increase efficiency levels to This enables the BPHE to extract the heat alternative brazing materials to meet the China enable SWEP to serve customers all achieve from the gases or liquids before it goes into demands for the variousdemanding corrosive fluids. recent EU over Ecodesign the world. SWEP Directive is represented that in more the condenser to be condensate (the liquid than 50 countries worldwide and is a global cover high temperature process chillers. Evaporators can Starting from small beginnings in Sweden in 1983, SWEP is now the world's leading supplier collected by condensation). corporation with 900 employees and a About SWEP at a range ofintemperature levelswhere to meet the4required of compact brazed plate heatoperate exchangers (BPHEs). These used to be Installing a BPHE helps to increase capacity heat close toneeds million BPHEs Starting from small beginnings Sweden in areproduction demands for a variety of heating, refrigerants. transferred efficiently in air conditioning, refrigeration, and industrial applications. efficiency levels to achieve the demanding per annum. 1983, SWEP is now the world’s leading recent EU Ecodesign Directive that cover supplier of compact brazed plate heat SWEP is part of the global Dover high temperature process chillers. exchangers (BPHEs). These are used where Corporation, a multi-billion-dollar, NYSE-traded, Highly efficient production units in Sweden, the USA, Malaysia, Slovakia, China enable BPHEs offer copper brazing as diversified standard butand also stainless Evaporators can operate at a range of heat needs to be transferred efficiently in air manufacturer of a wide range of SWEP to serve customers all over the world. SWEP is represented in more than 50 countries steel andrefrigeration, nickel as alternative brazing materials meet the temperature levels to meet the required conditioning, heating, and proprietary products andto components for worldwide and is a global corporation with 900 employees a production capacity demands for a variety of refrigerants. industrial applications. industrial and commercial use. ■ close to demands for various corrosiveand fluids.
About SWEP
4 million BPHEs per annum.
WWW.CIBSE.ORG
CIBSE GUIDE TO BUILDING PERFORMANCE 2019 |
19
SWEP is part of the global Dover Corporation, a multi-billion-dollar, NYSE-traded, diversified manufacturer of a wide range of proprietary products and components for industrial and
HEATING SYSTEMS
Creating comfort By Carl Davison, Technical Services Manager, Kingspan Industrial Insulation
The heatwave we experienced this summer is a sign of things to come according to the Met Office. Their most recent projections suggest that summer periods of extremely high temperatures could become ‘fairly normal’ by 2040. It is therefore important that building service specifiers fully consider the risk of overheating and look to mitigate it.
R
ecent research from AECOM has suggested that the simple step of installing an enhanced specification of insulation and insulated supports on pipework in communal areas can help reduce overheating.
AECOM Research The minimum insulation requirements for hot water and heating systems are contained within the Domestic and Non-domestic Building Service Compliance Guides. For optimal system efficiency, however, the Energy Technology List (ETL) recommends a higher performance pipe insulation specification based on NES Y50 Enhanced levels. To investigate how different pipe insulation specifications can affect overheating and system performance, AECOM carried out a detailed evaluation using IES dynamic thermal modelling. The research assessed the performance of three insulation systems on LTHW (Low Temperature Hot Water) and DHW (Domestic Hot Water) pipework within a multiunit residential extra-care building with a constant circulation of hot water. The modelled specifications were: Option A – Man Made Mineral Fibre (MMMF) Pipe insulation specified to BS 5422: 2009 with rubber lined pipe support brackets. Option B – Premium phenolic pipe insulation specified to minimum standards within BS 5422: 2009 with phenolic insulation pipe support inserts. Option C – Premium phenolic pipe insulation to the enhanced ETL specification with phenolic insulation pipe support inserts. The study also considered the use of extraction fans to dissipate heat.
20
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
AECOM carried out detailed IES dynamic thermal modelling using an extra-care housing case study building.
Results To evaluate the impact of each specification on overheating, AECOM calculated the percentage of hours with a dry resultant temperature of greater than 25°C and 28°C. The results showed that, when compared with the MMMF system, the BS 5422 phenolic specification provided a reduction of up to 15% in overheating hours at a room temperature greater than 28°C and 9% at a room temperature greater than 25°C. The ETL specification offered further benefits with falls of up to 32% in overheating hours greater than 28°C and 25% in overheating hours over 25°C.
The research showed that an ETL specification of premium performance phenolic insulation and insulated pipe supports, such as those within the Kingspan Kooltherm Complete Pipe Insulation System, can reduce overheating and cut energy usage. (Image Courtesy EIC)
In some scenarios, the modelling showed that rooms with the MMMF specification would have experienced over 100 additional hours at temperatures above 28ºC when compared to the ETL specification. These reductions also produced considerable energy cost savings. The projected average energy cost of the MMMF specification was calculated at £3,973, rising to £4,105 when the impact of additional extraction fans was considered. The BS 5422 phenolic specification achieved annual savings of £431 or £463 depending on whether the impact of extraction fans was taken into account. With the ETL phenolic specification even greater savings of £1,252 and £1,384 could be achieved. Finally, the study showed that when the extract fans were considered, the ETL specification would have an immediate payback. As with all products on the ETL, it is also supported under the Enhanced Capital Allowances Scheme, enabling businesses to write-off the whole cost of investment in energy saving equipment against their taxable profits for the period during which they make the investment.
Future Proofed Whether you’re designing services for a new or existing building, its important to properly address the potential for overheating. The use of an ETL specification of pipe insulation and insulated supports is one simple way to achieve this whilst also improving the performance and cost efficiency of services. ■ For more information, please contact: Tel: +44 (0) 1544 388 601 E-mail: info@kingspaninsulation.co.uk www.kingspanindustrialinsulation.com
Kingspan Koolther Pipe Insulation can achieve aged thermal conductivities as low as 0.025 W/m·K and is FM Approved per Approval Standard Class 4924.
Limiting the effects of
Overheating in Building Services Applications
T, COS GY... UCE NER RED UCE E RED
em Syst in g tion ors sula verheating Corrid In in Pipe cts of Oal Build Effe enti The i-Resid Mult
Rising temperatures have highlighted issues with buildings overheating, and the contribution of building services to unwanted heat gains is coming under scrutiny. Recent research from AECOM has suggested that the use of an enhanced specification of pipe insulation and insulated pipe supports on hot water and heating pipework can help reduce overheating in some buildings. Our white paper examines the issues of overheating, including in void and corridor spaces, and looks at the benefits of going a step further than the base Building Regulation requirements. Contact us on news@kingspaninsulation.co.uk for your free copy or to request a CIBSE Approved CPD on this topic.
For further information: +44 (0) 808 168736 hvactechnical@kingspaninsulation.co.uk
www.kingspanindustrialinsulation.com
Glossop, Derbyshire SK13 8GP, UK.
ÂŽ Kingspan, Kooltherm and the Lion Device are Registered Trademarks of the Kingspan Group plc in the UK and other countries. All rights reserved.
HEATING SYSTEMS
Altecnic Ensures Energy Efficient District Heating System for New London Apartments A new apartment block that has been converted from offices will benefit from an energy efficient district heating system thanks to 183 Heat Interface Units (HIUs) and more than 800 dynamic thermostatic radiator valves (TRVs) from Altecnic.
M
&E contractors G&H Group worked closely with Altecnic to develop the specification for Carolyn House following its change of use from offices to an apartment block. The specification and correct installation of the central heating system will save future residents money and also ensure that every apartment has a reliable source of hot water and heating, even at times of peak demand. David Davis, Group Director for G&H, says “District heating systems such as this are becoming more common and we were keen to work closely with a manufacturer who not only supplies product but also provides technical advice and training so that we could provide an efficient and reliable solution.” Achieving maximum efficiency from such a system relies on the HIU in each apartment returning a very low temperature back onto the network. This keeps primary flow rates low, reduces heat lost from the system, ensures the greatest benefit from any included renewable energy sources and allows condensing boilers to work at their optimum efficiency.
The low heating demand in modern apartments means that only a very small flow rate of hot water is required on the space heating circuit. This low flow rate makes it difficult to balance the radiators, so there is a danger of a high space heating return temperature being passed back onto the network. This reduces the efficiency of the whole network. Working closely with Altecnic, G&H maximised the difference in temperature between the flow and return temperatures (Delta T) on each apartment’s space heating circuits. First using the DYNAMICAL® TRVs from Altecnic, it is possible to preset the maximum allowable flow rate for each radiator on the DYNAMICAL® valve before installation. Once installed, the valve finely controls the flow rate of water through each radiator regardless of changes in pressure on the space heating circuit. This ensures that the required flow is never exceeded, the maximum heat output from the radiator is maximised and the subsequent return temperature to the HIU is kept low.
“Well designed heat networks, pre-settable dynamic radiator valves and RTL within HIU’s will result in more efficient networks and greatly reduce the potential for overly warm corridors during the warmer months.”
22
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
Second the SATK32103 HIUs are equipped with Return Temperature Limitation (RTL). This allows a maximum return temperature back onto the network to be set. Once enabled and set, the HIU will control its output into the apartment to ensure that the pre-set primary return temperature is met. Not only does this mean that each apartment is efficiently heated for minimum cost to each resident, but it ensures that the overall network is efficient and protected from failure due to small Delta T’s and high primary flow rates. The lower return temperature also means that the heat network size can be reduced and a lot less energy is lost into the building fabric. Well designed heat networks, pre-settable dynamic radiator valves and RTL within HIU’s will result in more efficient networks and greatly reduce the potential for overly warm corridors during the warmer months. Davis continues, “I know that other contractors have had problems with district heating systems in the past due to the nature of commissioning such systems. We wanted to partner with a supplier that could work with us to develop the specification and provide product and training to ensure that the scheme is successfully commissioned. Every resident in this apartment block will get heating and hot water on demand even at times of peak usage, such as on a Monday morning before people go to work. “Altecnic’s HIUs and TRVs and their level of technical advice and assistance have been invaluable in this very successful project.” ■ For more information, please visit www.altecnic.co.uk
Follow Altecnic on Twitter @Altecnic Like Altecnic on Facebook @Altecnicltd Follow Altecnic on LinkedIn @Altecnic
Maximise Heat Network Efficiency SATK32 HEAT INTERFACE UNIT
The SATK32 Series of HIU’s features a sophisticated, multifunctional operating system, that offers increased flexibility for the tenant, whilst protecting from network inefficiency and failure. Manufactured by Caleffi, it’s advanced electronic features include: • Modbus input/output for remote commissioning and diagnostics • Integral room controller • Return temperature limitation • Primary flow rate limitation • Configurable preheat
T: 01785 218200 E: specifications@altecnic.co.uk
altecnic.co.uk altecnicltd/
altecnic/
company/altecnic/
HEATING SYSTEMS
Ideal Commercial heats world’s first joint faith school Ideal Commercial Boilers has supplied a state-of-the-art floor standing modular Evomod boiler for installation in the world’s first joint faith school, located south of Glasgow.
delays caused to other onsite trades. Being of modular design, the boiler was easier to install in the tight spaces available during the later stages of the project. Like all Ideal boiler systems, costing the specified products was straightforward, with the merchant able to assist in the specification process.”
Why was Evomod right for this project?
I
nstalled by engineering support services specialist, Marmac, this project marks an iconic installation of the manufacturer’s highly efficient, space-saving Evomod commercial heating solution. Forming an integral part of an £18.2million Jewish and Catholic joint faith school campus, Ideal Commercial Boilers was selected from a tender panel of manufacturers to provide a high output product capable of delivering 750kW of energy in an unusually small footprint. Comprised of stackable modules each offering a 250Kw output, the Evomod is a scalable commercial heating solution which can be increased to meet specifications of up to 1000kW. This flagship facility is a world first in multi-faith education, replacing an existing Jewish school and providing an additional primary school provision for the local Catholic community. Now complete, the building boasts a shared amphitheatre and outdoor obstacle trails, as well as sports pitches, first-class ICT facilities, modern teaching spaces, an impressive library and state of the art science laboratories. The build was completed by a 90-strong daily workforce and took nine months to
24
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
complete. Ideal Commercial Boilers’ Senior Business Development Manager for Scotland, Charlie Newell, comments on the success of the project: “This project is one we’re extremely proud to be part of. Given the heating requirements of the building and the limited square footage of the plant room, the Evomod was the perfect specification choice for this building design. “We are confident that the school will benefit from optimised energy efficiency and zone-by-zone heating comfort, with minimal maintenance required.” Boasting a stainless-steel heat exchanger, the Evomod boiler installed uses a combined flue header for all three modules, complete with flow return pipework for quick installation. Chris McCall, Operations Director for Marmac Services, adds: “Working closely with main contractor Heron Bros we were able to install the Evomod system quickly and efficiently, with no
Modulation prevents the inefficiencies of on/ off cycling by matching the output power to the thermal load of the system. Optimum efficiency and reliability were important considerations in the specification of plant for this building, given that downtime would result in lost educational provision for hundreds of children. Being a modular boiler, Evomod allows the new school to benefit from the best of both worlds. Evomod is capable of achieving a modulation rate of 5:1 per module installed, allowing each module to modulate up until the demand requires output from a further unit, and so on until the demand is met. Work is shared equally between the units in operation, meaning each module can operate at its optimum efficiency. In the unlikely event of one of the modules failing, the system will remain in operation, allowing for continuation of supply. ■ For the video case study or more information on Evomod from Ideal Commercial Boilers, visit www.idealcommercialboilers.com
NOW WITH FREE * COMMISSIONING
WE HAVE IT COVERED. @idealcommercialboilers
@idealcommercial
Ideal Boilers
* Free Commissioning Offer available until 31/12/19 and only on Evomax, EVO S, Imax Xtra, Imax Xtra EL and Evomod boilers. Subject to terms and conditions.
MANAGEMENT SYSTEM CERTIFICATION
+
= Quality assured
Lower your risk: choose CIBSE Certification for your management system certification Recognised internationally As the UKAS symbol is recognised internationally, it will help facilitate access to international markets and offers you market differentiation, with proof of good practice. Using CIBSE Certification, an accredited certification body, to carry out an independent evaluation also helps demonstrate due diligence in the event of unforeseen legal action. And... CIBSE Certification can also offer non-UKAS Certification for the following schemes:
“Using CIBSE Certification, an accredited certification body, to carry out an independent evaluation, helps demonstrate due diligence in the event of unforeseen legal action.” 26
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
U
sing CIBSE Certification to certify your Management System will allow you to use the UKAS symbol on your documentation. This will provide your customers with the assurance of the highest standards of quality and service you provide. The United Kingdom Accreditation Service (UKAS) is the sole national accreditation body for the United Kingdom. UKAS is recognised by government to assess against internationally agreed standards organisations that provide certification, testing, inspection, and calibration services. CIBSE Certification is UKAS accredited to certify:
• ISO 50001 Energy Management System • ISO 9001 Quality Management System
• ISO 14001 Environment Management System
• ISO 18001 Health and Safety Management System Interested? Please email ccms@cibse.org and we’ll respond at once.
About CIBSE Certification CIBSE Certification Limited is a wholly owned subsidiary of the Chartered Institution of Building Services Engineers (CIBSE). Originally operating as a Certification Body for personnel competence schemes (ISO17024), CIBSE Certification is now developing a capability to certify Integrated Management Systems (ISO 17021). To date, they are UKAS accredited for ISO 9001 and ISO 50001, and have applications with UKAS for ISO 14001 and ISO 45001. ■ www.cibsecertification.co.uk
Fire Protection Ltd is part of the Hotchkiss Group and one of Britain’s leading manufacturers and installers of fire-resistant ductwork. Our reputation for innovative technology and service reliability is industry wide and our fire resistant products and services safeguard many of Britain’s most prestigious buildings. Our pioneering fire rated ductwork systems result from expertise in two technologies - ductwork manufacturing, and the production of fire resistant coatings - creating an unrivalled system of fire protection - far in advance of more traditional competitor products. A continuous research and development programme ensures that we meet building specifiers’ most exacting standards, by setting new standards in the industry. Our products are exhaustively tested to meet, and often exceed, all relevant British, European and ISO standards. • Fire Protection Limited are committed to providing fire rated ductwork systems to meet British and European standards. We are strategically positioned to provide systems meeting the requirements of BS EN 1366 Parts 1, 8 & 9, in addition to our BS 476 Part 24 range of systems. • Our published Guidance Note has been widely recognised as an authoritative document covering the subject of fire resistant ductwork. • From a global perspective, Firespray International Limited provide our systems via an extensive network of approved licensees.
FIRE PROTECTION LTD Flamebar House, South Road, Templefields, Harlow, Essex CM20 2AR Tel: 01279 634 230 Fax: 01279 634 231 E-mail: info@fireprotection.co.uk Web: fireprotection.co.uk
DESIGN. DELIVER. PERFORM.
REGISTER NOW
CIBSE.ORG/B2PLIVE
The countdown to UK’s premier event for built environment solutions has begun. CIBSE Build2Perform Live 2019 is the meeting place for forward-thinking industry professionals, visionary speakers, leading industry exhibitors and young talent, delivered in a dynamic format across two days. Why attend this year? • 90+ speakers • 2,000 sector attendees • 70 leading suppliers to the sector, all in one place • Practical take-aways to use in your business immediately upon returning to your office • Theme-driven programme designed especially with a building services professional in mind • 70 hours CIBSE CPD sessions across two days • Free to attend Secure your place today www.build2perform.co.uk Follow #Build2Perform for latest news
Register via www.cibse.org/b2plive 2018 Supporters
Follow #Build2Perform 2018 Headline Theatre Sponsor
ICOM
Energy Association
Parallel Support and Learning
soundcloud.com/ build2perform
Media Partner
2019 Networking Area Sponsor
ISO 9001
CIBSE Certification approved by UKAS to certify to ISO 9001 CIBSE Certification Ltd is accredited to certify Quality Management Systems (QMS) against ISO 9001 by the United Kingdom Accreditation Service (UKAS).
Opening new business opportunities
I
SO 9001, the international standard for Quality Management Systems, is an internationally recognised quality framework for products and services which meets both customer and regulatory requirements. This further UKAS accreditation supplements the existing accreditation to certify Energy Management Systems to ISO 50001. Dr Andrew Geens, Head of CIBSE Certification, said “This is an exciting development, extending our ability to offer certification of integrated management systems for quality and energy. I hope that the building services community will support this initiative by using us for their ISO 9001 certification, and for their clients’ ISO 50001 certification. We are also working towards accreditation for ISO 14001 and ISO 45001 to further expand the scope of our management systems certification service.”
WWW.CIBSE.ORG
and benefit from their reputation as a UKAS accredited Certification Body and their industry-leading knowledge of the built environment sector. For any organisation that already has a UKAS accredited ISO 9001 certificate, the process of transferring to CIBSE Certification is very straightforward. Transfer is only available to holders of a UKAS accredited Certificate. The transfer of certification is defined as the recognition of an existing and valid management system certificate, granted by one accredited certification body, by another accredited certification body for the purpose of issuing its own certification. If you hold a non-UKAS accredited certificate you can apply to a UKAS accredited Certification Body such as CIBSE Certification for certification, but your current certificate will have no bearing on your application – you will be considered a new client.
“Running an ISO 9001 certified QMS demonstrates a business’ commitment to meeting the needs of its customers and prioritising their satisfaction.”
Coming soon… ISO14001
Running an ISO 9001 certified QMS demonstrates a business’ commitment to meeting the needs of its customers and prioritising their satisfaction. It also demonstrates a streamlined and efficient quality assurance procedure that maximises success whilst keeping costs as low as possible. The standard opens new business opportunities with clients looking for assurance over quality and fulfils requirements for some tenders – particularly in the public sector.
Apply for certification or transferring certification
Any organisation that has implemented the requirements of the standard, and operated the system for six months, may apply to CIBSE Certification for ISO 9001 certification
For the full information on the straightforward processes, please contact CIBSE Certification at ccms@cibse.org or call 020 8772 3614
Transfer to CIBSE Certification
CIBSE Certification Limited is a wholly owned subsidiary of the Chartered Institution of Building Services Engineers (CIBSE). Originally operating as a Certification Body for personnel competence schemes (ISO17024), CIBSE Certification is now developing a capability to certify Integrated Management Systems (ISO 17021). To date, they are UKAS accredited for ISO 9001 and ISO 50001, and have applications with UKAS for ISO 14001 and ISO 45001. ■
CIBSE GUIDE TO BUILDING PERFORMANCE 2019 |
29
INSTALLATION, OPERATION & MAINTENANCE SERVICES
Air Conditioning Inspections CIBSE certified Air Conditioning Inspectors can provide you with air conditioning inspection reports for both simple and complex systems.
include more complex controls that may divide the conditioned spaces into zones where different control parameters can be applied, and that could be located remotely from the equipment, or incorporated into a building management system (BMS). Centralised systems include the following:
• Centralised air systems: cooled air is
Air Conditioning Systems Explained Simple or packaged cooling systems These are generally indoor units that contain refrigerant-to-air heat exchangers and an integral air circulation fan. They are usually described as follows:
C
IBSE LCEAs are trained and certified to provide a high quality professional service, Our Energy Assessors are at the forefront of the market because they hold the knowledge and practical experience to make your building more energy efficient. You can find a CIBSE certified Air Conditioning Energy Assessor in your area by searching our register of Low Carbon Energy Assessors.
When is an Air Conditioning System Inspection Required? The Energy Performance of Buildings (Certificates and Inspections) (England and Wales) Regulations 2007 require inspection of all air conditioning systems. Since January 2009 all air conditioning systems above 250 kW must be inspected, and since January 2011 those over 12 kW must also be inspected by certified air conditioning inspectors. Lodgement of air conditioning inspection reports became mandatory in April 2012. CIBSE certifies air conditioning inspectors capable of working on both simple (Level 3 Only) & complex systems (Level 3&4).
30
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
• Unitary packaged units: with indoor and outdoor units both contained in a selfcontained ‘unitary’ housing, often installed as a ‘through the wall’ unit. • Split packaged units: a single floor, wall or ceiling mounted indoor unit connected by refrigerant pipework to a single outdoor unit. • Multi-split packaged units: a number of floor, wall or ceiling mounted indoor units connected to a common outdoor unit by their own dedicated refrigerant pipework. • Variable refrigerant flow (VRF) systems: a number of floor, wall or ceiling or mounted indoor units connected to a common outdoor unit by refrigerant pipework. All of these units may be reversible, allowing operation as a heat pump. They may include electric resistance heating. These simple packaged units or systems usually include selfcontained ‘on-board’ controls for temperature and may include a timer control function. Centralised (complex) cooling systems These systems are more extensive and complex, and are generally characterised by the use of water or air distribution systems to deliver cooling to conditioned spaces using a variety of terminal devices. They generally
produced by a cooling heat exchanger in an air handling unit (AHU) and distributed to conditioned spaces through ductwork to grilles or diffusers, or to other terminal units, in the conditioned spaces. This category includes systems where air distributed through a centralised ducted system may also be cooled at terminal devices in the conditioned spaces. • Centralised cooled water systems: cooled water is produced centrally and distributed to terminal devices in the conditioned spaces. Terminal units may transfer cooling to re-circulated room air, to fresh air drawn locally from outdoors, or to air supplied through centralized ducted systems. • Water loop/reversible heat pump systems: systems with individual reversible water to air heat pumps in the treated space that draw or return heat from or to a common temperature controlled water loop. Excess heat in the water loop is dissipated as necessary by a cooling tower (often a dry cooler), and heat in the loop provided by a central heat generator (fossil fuel boiler, electric flow boiler, or other central heat exchanger). • Additional systems: some areas may be served by packaged, split and multi-split packaged comfort cooling equipment, including variable refrigerant flow (VRF) equipment, in addition to a centralized system. Useful Air Conditioning Inspector Documents • A Guide to Air Conditioning Inspections for Buildings (DCLG) • Energy Certificates and Air Conditioning Inspections for Buildings (DCLG) • TM44: Inspection of Air Conditioning Systems (available for purchase from CIBSE Bookshop); TM44 Addendum for Scotland To find out more about Air Conditioning Inspections and to access the CIBSE Certification online register: www.cibsecertification.co.uk/aci
GB Group advert 2018_CIBSE_vis 05/12/2018 13:40 Page 1
Visit our new website:
www.gratte.com
2 Regents Wharf, All Saints Street, London, N1 9RL. Telephone 020 7837 6433 Email info@gratte.com
Accredited to the ISO 14001 Environmental Standard.
Here is the new design.
KSB - Building Information Modeling KSB UK are making great strides to provide all our customers with everything they need for BIM in the UK Market. Not only do we already provide 3D BIM Objects in a variety of file formats but we also aim to provide the Information side of BIM Level 2, such as COBie and Product Data Sheets in the near future; one simple download. For more information visit www.ksb.com
Here is the new design.
Client: Gratte Brothers Date: 05.12.18 Publication: CIBSE Size: 130x180mm
INSTALLATION, OPERATION & MAINTENANCE SERVICES
Preventing corrosion by continuous monitoring Corrosion is the invisible enemy of water systems. It has few visible symptoms but its consequences are costly in both time and money. Building owners tend to rely on sporadic sampling tests, or only react once the system has failed. It’s time to look at advancements in technology and implement methods of prevention, rather than cure, to avoid the expense and inconvenience of corrosion.
H
eating technology is advancing all the time. Pumps and boilers are becoming smaller and more efficient. New materials are introduced and applied to components such as pipework and fittings, as well as heat exchangers and valves. In general, these advances can be seen as a positive. They make systems more energy efficient and allow more space for offices or living accommodation. Yet no progress comes without down sides or without the need to adapt. We must then question whether systems are still as reliable as they used to be, whether they last as long, and if they need more or less maintenance. Progress means that systems and their components are becoming increasingly more complex, yet skill levels in the industry are dropping. As a result, systems often don’t operate anywhere near their designed efficiency. They suffer frequent breakdowns and, like modern cars, can only be fixed by experts. One thing is certain, modern heating and cooling systems need high quality, clean water as a means to transfer energy efficiently. Even relatively small amounts of dirt or sludge can cause costly breakdowns. It is then no coincidence that dirt separators of all kinds have proliferated in recent years. Whether fine mesh or bag filters, in line, side stream or with magnets, they are all designed to do one thing – keep the water clean. Insurance companies have been seeing a massive increase in claims for water loss and boiler and pump manufacturers have been receiving more and more warranty claims. Most, if not all, of these issues can be traced back to corrosion problems. Corrosion is
32
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
often not recognised as the cause for system problems, which leads to people fighting the visible symptoms and not the cause. Even if it is recognised to be corrosion, the response is all too often a chemical one, which still fails to tackle the underlying cause. By the time the problems have become visible, through failing components or blockages, costs will be spiralling. What is needed is an early warning system – something that will send a warning if corrosion levels are increasing to the point where it is damaging the system. Traditional methods of testing for corrosion are the use of corrosion coupons or analysis of water samples. A key problem with these methods is that they only give an indication as to what the current state of the water is. The real problem is that they rarely get done at all. Wouldn’t it make sense, therefore, to have an online system that continuously measures corrosion rates, without the need for coupons or samples? Until recently, equipment to measure corrosion, such as the LPR method, was prohibitively expensive for HVAC systems. Indirect measurements, such as pH or
conductivity, have been possible for some time, but require specific expertise in order to evaluate the results. Fortunately, like heating technology, sensor technology has advanced rapidly and a number of affordable corrosion monitoring systems are now available. These systems can be split into 2 categories: direct and indirect measurement. The indirect systems measure water quality parameters such as pH and conductivity, whereas the direct monitors measure corrosion directly, using a single sensor, and are therefore much more cost effective. The patented Risycor uses an electronic version of the proven coupon method. The advantage of this direct method is that only one type of sensor is required. A major advantage of monitoring systems is that they don’t just measure, but also record corrosion levels during the lifetime of the plant. Most of these systems also have the ability to send an alarm when corrosion rates exceed safe levels, or even have remote viewing functions.
These alarms give operators and FM companies plenty of time to check, locate and remedy the causes of the increased corrosion levels before they do any costly damage to the system. This goes even for systems with precision carbon steel pipework for which corrosion monitoring is a must ….for routine maintenance and correcting simpler problems a smart system could definitely have its advantages’. ■ For more detailed information about preventing corrosion by continuous monitoring, contact Gordon Pringle of HASL and ask for the CIBSE approved CPD.
“It takes 20 years to build a reputation and 5 minutes to ruin it. If you think about that, you’ll do things differently.”
HEALTH AND WELLBEING IN BUILDINGS
Why your FM has more influence on your health than your GP collated in this guidance highlight areas still under debate, research, and development, where professionals should follow updates in knowledge, solutions, and products. They are also areas of opportunities for innovation and competitive advantage as well as for collaboration between practitioners, FMs and academia, and added value to projects. Summary of Contents of TM40 2019: This has prompted a comprehensive revision of CIBSE’s TM40: Health Issues in Building Services and the resulting comprehensively updated guidance will be published in the summer of 2019 as CIBSE TM40: Health and Wellbeing in Buildings. Significant advances addressed in the new edition include: • Increased understanding of non-visual effects of light on metabolism • Growing evidence of overheating risks • Widespread deployment of LEDs, wireless technologies and consumer devices • Building occupants monitoring their environment and activities
• Overview: the ‘why’ of health and wellbeing
The guidance will be available as a single document, but it is also structured to be readable in parts that cut across themes, for example to go through the health effects of environmental factors, or guidance on the operational stage. The guidance healthy and comfortable also considers the Advances in implications of working environment.” knowledge and procurement of – Dr Hywel Davies, Technical Director, CIBSE solutions buildings and of FM contracts for Rising life expectancy, increasing levels of achieving and delivering safe and healthy chronic non-communicable disease and building outcomes. greater knowledge of the influence of our environment have highlighted the significant Emerging Themes role of the built environment in public health Knowledge and products used in buildings and in improving our wellbeing, comfort and are rapidly evolving. The Emerging Themes cognitive performance.
has more influence on your health than your GP – how FM can support health and wellbeing strategies; ways FM teams can support strategies in operation; how to procure and manage FM teams – contracts, skills, performance, objectives; cross-cutting guidance on maintenance issues; monitoring operational performance
C
onsideration of building users’ safety, health and comfort has always been fundamental to the role of building services engineers, and is increasingly important to Facilities Managers and those responsible for the operation and maintenance of “This new edition of TM40 will buildings. The be essential practical guidance potential impact of occupant health and for developers, engineers, FMs, wellbeing on and building operators alike. productivity, and Health and wellbeing is critical therefore on to building occupiers and organisational their productivity, and TM40’s performance, guidance will underpin and including profitability, support their efforts to provide is now widely known and maintain a safe, efficient, and recognised.
34
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
strategies – statistics and references; impact of the built environment; synergies and conflicts with environmental strategies; regulations and drivers; influence and limits of designers
• Procurement, Design and Construction: how to integrate health and wellbeing throughout project stages – including briefing and setting targets and procurement; control and monitoring strategies; construction impacts on site workers and the future building; handover and commissioning; postoccupancy evaluation
• Operation and Maintenance: why your FM
• Thermal conditions, Humidity, Air, Light, Acoustics, Electromagnetic fields, Water: why each factor matters; regulatory requirements; defining health and wellbeing performance in buildings; how to integrate this factor in design, construction and operation
• PLUS - Emerging Themes: the last section in all 13 chapters addresses current R & D, future trends and current limits of knowledge. ■ To find out more about the new edition of TM40 and how it can help you to deliver the corporate social responsibility and health and wellbeing standards required by stakeholders, staff and customers, please visit: www.cibse.org/TM40
DISPLAY ENERGY CERTIFICATES
Display Energy Certificates for public buildings Since January 2013 Display Energy Certificates (DECs) need to be prominently displayed in buildings over 500m2 that are occupied by public authorities or institutions providing a public service. DECs for buildings over 500m2 - 1000m2 have a 10 year validity. Some newer buildings will have this information to hand, especially if the facilities managers have been maintaining a log book or operations and maintenance manuals (O&M); but often this information will need to be collected from a variety of documents held with separate departments within the organisation.
How could your business benefit from a CIBSE certified Energy Assessor? CIBSE Low Carbon Energy Assessors (LCEAs) are trained not only to provide you with a display energy certificate but to go further, to provide tailored advice to help you cut the energy costs and carbon emissions in your buildings. The operational rating on a DEC illustrates how efficiently the building is using energy. To calculate this rating a Low Carbon Energy Assessor will require information on the:
• type of building under assessment. • total floor area of the building.
Does your building need a DEC?
• annual energy use of the building
A DEC is required annually for public buildings and those occupied by public authorities which have a total useful area greater than 500m2 and provide a public service to a large number of people and are therefore frequently visited by those people. The display energy certificate has been a requirement since 1 October 2008 and shows the actual energy usage of a building. For more detailed information on DECs see the useful documents section below.
• methods used to heat and cool the building.
DECs rate the actual or operational energy performance of a building against established benchmarks and take into consideration the ways in which occupants use the building.
WWW.CIBSE.ORG
(gas and electricity).
In addition, to ensure the accompanying Advisory Report provided by your Low Carbon Energy Assessors (LCEA) will provide relevant guidance to assist you in improving your Operational Rating in subsequent years, s/he will benefit from the following additional information:
• How the heating and cooling is controlled. • The use and method for heating/cooling water in the building.
• Type of lighting used in the building. • Any onsite energy generation (renewable, etc).
CIBSE LCEAs are trained and certified to provide a high quality professional service. Our Energy Assessors are at the forefront of the market because they hold the knowledge to make your building more energy efficient.
Useful Display Energy Certificate Documents Further information on DECs can be found in the downloadable documents below:
• Improving the Energy Efficiency of our Homes and Buildings - Display Energy Certificates Media Overview (MHCLG)
• Getting Ready for DECs (HM Government) • A Guide to Display Energy Certificates and Advisory Reports for Public Buildings (MHCLG) ■ For more information about DECs and to search our online register for a CIBSE certified DEC Energy Assessor in your area, visit: www.cibsecertification.co.uk/dec
CIBSE GUIDE TO BUILDING PERFORMANCE 2019 |
35
INDOOR AIR QUALITY
A certified step towards sustainability According to the EU, buildings are responsible for 40% of all energy consumption in member states. Ventilation is one important contributing factor and in any building, whether it be a school, a commercial property or a private house, the ventilation system constitutes approximately 30% of the total energy consumption.
Certification – a push for the entire ventilation industry The Lindab Safe circular duct system has been certified for strength and leakage according to the toughest tightness class D by Eurovent. Lindab is the first company in Europe to receive such a certificate for a duct system from the renowned organisation. “The certification is a milestone that will hopefully raise the overall standard of production in the ventilation industry”, says Torbjörn Bruzelius, Strategic Product Manager for Lindab Group. The certification is a reminder that highstandard ventilation solutions are a necessity in our efforts to reduce energy consumption and minimise strain on the environment.
Durable gaskets Lindab Safe uses a gasket made from temperature resistant and durable EPDM rubber which is fixed without tension, this means that the aging of the rubber is much slower and the gasket has good ability to maintain its sealing function and airtightness after many years in operation.
Bigger gaskets for bigger ducts
“The certification is a reminder that high-standard ventilation solutions are a necessity in our efforts to reduce energy consumption and minimise strain on the environment.” 36
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
V
entilation requires energy to work but poorly functioning systems often lead to unnecessarily high consumption. Duct systems that have not been assembled in a correct manner or components that do not fit are recurring problems that result in air leakage and high costs. The obvious way to minimise wasteful consumption is to develop air-tight ventilation systems.
The highest standard of airtightness Airtightness classification stretches from A to D where every step represents airtightness that is three times better than the former. Ventilation manufacturer Lindab believe that a minimum standard of class C should be accepted and they insist that the Lindab Safe circular duct system meets the highest standard of airtightness, what we refer to as class D, however Lindab want to do more to raise the standards in the industry.
Most European standards allow a greater tolerance range between the duct and matching fittings as the diameter increases. In order to achieve maximum sealing for all dimensions Lindab use successively bigger gasket lips as duct dimensions increase. This is one reason why they can guarantee the same tightness class D in all dimensions.
‘Pressure-proof’ Ventilation systems should be able to withstand positive and negative pressures within the tightness class. When it comes to high negative pressures, it is important to be confident that duct will not collapse. Ducts can be further supported with external flanges.
All products have airtightness in mind Pressed fittings with no spot welding used in production reduces potential leak and failure points. Female fittings with rolled edges makes fittings more rigid, of tighter tolerance and easier to install and also maintains tightness across the system. It is important that more technical products like silencers, dampers and measuring units are air tight. Lindab ensures products are recommended for tightness class C or class D. ■ For more information about Lindab Safe, contact: sales@lindab.co.uk
li nda b | we si mpl ify c onstr uct ion
Lindab Solutions
Build for the future
Customised indoor climate solutions that simplify the construction of sustainable buildings Our customised indoor climate solutions comprise all the parts you need to efficiently execute a project. You receive a complete combination of ventilation systems, products, knowledge and support – all in one package. As your partner, we put together a solution that is tailored to meet your needs, and those of the end user, while
www.lindab.co.uk
supporting you throughout the process. We help you to plan, dimension and optimise your project and provide complete documentation about your systems and products. And you can draw on the knowledge we have amassed over years of developing energy-efficient systems that meet future needs. This means you can carry out your project more efficiently, and offer your clients the perfect indoor climate.
INDOOR AIR QUALITY
Is there a WISE way to deliver a quality indoor climate? Buildings can be greener if smart technologies are integrated into the design of HVAC systems with exciting implications for improving energy efficiency and comfort, explains Robin Vollert*.
T
he current global market for ‘smart building systems’ was estimated at around £5bn in 2017 but is expected to grow to beyond £30bn by 2022. That means this sector is outstripping any other part of construction by some distance. Buildings are responsible for around 40% of global energy consumption with HVAC systems the biggest contributor, with climate, location, insulation levels etc. determining energy usage. Digital technologies allow building services designers more control over how a building will perform. Connectivity is the crucial change that allows designers to more closely match the performance of heating, cooling and ventilation systems to user demand. The availability of wireless networks means systems can be
more easily configured, commissioned and controlled. They also give engineers a route to tackling the individual pieces of equipment that consume the most energy, such as fans and chillers. Using demand control in ventilation can reduce the amount of fan energy used by as much as 80% and the energy saving for cooling and heating can be up to 40%. This is because air, cooling and heating are supplied in just the right amounts, at the right places and at the right time based on the user’s demand patterns, cutting out unnecessary operating time.
Intelligence and Simplicity
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
As well as a general lack of hard wiring throughout the network, the batteries that provide power to the individual sensors in each piece of equipment have an operating life of 10 years. The simple commission approach radically reduces the time needed to install, set up and commission the system and cuts out many potential areas where faults can occur. It also means it is much easier to reconfigure the system when changes are made to room layouts or usage patterns. We continue to add individual system components to the WISE network and have recently produced new WISE versions of our supply air diffusers, which are capable of adjusting the airflow as needed and optimising the throw of the air, even at low flow rates. This ensures a good indoor climate, with good mixing of the room air, without the risk of disrupting the occupied zone. Being able to deploy the very latest in wireless technology underpinning a robust and reliable communication network opens up all sorts of possibilities for building services systems. The WISE network is already in use in over 100 projects worldwide – including a project in Stockholm that achieved a BREEAM ‘outstanding’ rating and is now in UK buildings. ■
“WISE takes demand controlled ventilation to a new level by applying the technology across complete climate control system for entire buildings seamlessly.”
Swegon have recently made a breakthrough in wireless technology to create a fully digital, complete system solution for building ventilation, heating and cooling control. The WISE demand controlled indoor climate system is designed to be simple and reliable. The wireless installation is commissioned without communication cabling, which reduces time, cost and complexity. WISE takes demand controlled ventilation to a new level by applying the technology across complete climate control systems for entire buildings seamlessly. Communicating via wireless signal, if there is a break in the signal, the network simply reroutes the messages via a different route so there is no drop in the system’s performance.
38
Wireless commissioning
*Robin Vollert is Managing Director of Swegon UK&I. For more information visit wise.swegon.com
Organise your table and look forward to
Preventing Corrosion by Continuous Monitoring
Corrosion rate (µm/yr)
….for routine 120 maintenance and 100 correcting simpler problems a smart 80 system could 60 definitely have its 40 advantages. 20
Chris Thompson 0 Research Engineer 18.12.14 09:12 20.03.15 06:03 BSRIA
20.06.15 03:06
20.09.15 00:09
20.12.15 21:12
21.03.16 18:03
21.06.16 15:06
21.09.16 12:09
21.12.16 21:12
21.06.16 15:06
21.09.16 12:09
21.12.16 21:12
Temperature (°C) 80 60 40
Book your seat via
20 0 18.12.14 09:12
20.03.15 06:03
20.06.15 03:06
20.09.15 00:09
20.12.15 21:12
21.03.16 18:03
+ 44 1506 438083
WWW.HASL.CO.UK
FACILITIES MANAGEMENT
Everything FMs need to know CIBSE Guide M: Maintenance Engineering & Management is the guide for facilities managers, designers, maintainers, building owners and operators bringing together everything facilities managers (FMs) and designers need to know about maintaining and operating buildings in one authoritative publication.
B
uilding services engineers provide the internal environmental conditions that enable business processes to function at an optimum level while providing a safe, comfortable environment for occupants to achieve their maximum performance potential. Effective maintenance and operation is a key factor in ensuring this continues for the life of the building. Pressures on the supply, security and cost of energy are putting greater pressure on the FM industry to deliver energy efficiency. Current UK legislative requirements, such as the Minimum Energy Efficiency Standards (MEES), and the Energy Savings Opportunity Scheme (ESOS) are aimed at maximising the benefits and minimising the downsides of the energy impacts of a business. Nick Mead, then CIBSE President Elect, said at the launch of Guide M, “CIBSE’s Guide M is essential reading for everyone involved in designing, installing or operating building services. It is a comprehensive guide to good practice in the operation and maintenance of buildings.”
40
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
This guidance is intended for the benefit of all those involved in the operation and maintenance of engineering services. It aims to provide best practice for those who have responsibility for the management and maintenance of the engineering services in a building. It also aims to inform those who design and construct buildings and raise awareness of the implications their decisions have on enabling effective management and maintenance.
Performance outcomes, sharper focus The Building Services industry is concentrating on performance outcomes and closing the gap between design and operation. Working together, clients can be assisted by managing their expectations and maximising impact from their annual spends on the maintenance and management of buildings. The Guide avoids duplicating information that is available elsewhere, and references to useful documentation are provided. It identifies current good practice and addresses topics of particular interest and relevance to those involved at all levels in engineering services maintenance. This includes designers, manufacturers, installers, maintainers, building owners, occupiers and operators, professional advisors and specialist providers. It is not expected that the reader will read the publication from cover to cover; rather that it will be used for reference and guidance as needs arise.
This document is intended to bring maintenance into a sharper focus by helping building and property operators become more aware of their responsibilities and statutory duties. It will also help services designers to appreciate their role in providing installations that are safe, economic to maintain and operate, and capable of giving satisfactory performance over their full lifespan.
Presenting assets During the process of updating this Guide, the authoring Task Group collaborated with other publishers of best practice guidance including RICS (Royal Institution of Chartered Surveyors), BESA (Building and Engineering Services Association) and BSRIA Ltd to agree a structure for presenting assets (see Figure 1.1, which provides an overview of how the documents span the life cycle of a building.). This has resulted in the economic life data provided in Chapter 12 being structured by system and elements, being numbered to match NRM3 and providing maintenance task references to SFG20.
Benefit from BIM With development of Building Information Modelling (BIM), it is the management and maintenance teams that can benefit most from the increase in useful information generated in a BIM project. Users of Guide M are encouraged to look at the principles of BIM and introduce them in their existing buildings as they repair and replace assets, enabling the generation of a wealth of information that will support the long-term management of their buildings. Contents: 1 Introduction 2 Guidance for building services designers 3 Maintenance strategy and techniques 4 Maintenance contracts 5 Energy efficiency and maintenance 6 Controls for building services 7 Commissioning and testing 8 Handover procedures 9 Operating and maintenance documentation 10 Operational risk assessment and management procedures 11 Operation and maintenance costs 12 Economic life factors and end of economic life 13 Maintenance audits 14 Condition surveys 15 Legislation and compliance 16 Health and comfort 17 Training
For more Information, visit www.cibse.org/ knowledge and Search for ‘Guide M’
MEES
Would you buy an F rated fridge – or rent an F rated building? If you are the landlord of a building with an F or G rated EPC, the Minimum Energy Efficiency Standards (MEES), mean that you are no longer be able to let it.
F
rom 1 April 2018, landlords have been unable to renew existing tenancies or grant new ones unless the building has a minimum EPC rating of E or is registered as exempt.
Martin Barlow, Partner at law firm Burgess Salmon stated in the lead up to the introduction of MEES: “From April 2018, a new legal standard for minimum energy efficiency will apply to rented commercial buildings. The new legal standard brings threats and opportunities for landlords, freehold investors, developers and lenders.”
Mitigate the threat Landlords can mitigate the threat of not being able to rent by:
• Conducting an audit of
Worth checking and considering options EPCs have been produced for commercial buildings since 2008 and nearly 20% of these are F or G rated. Changes to the software since have tended to produce poorer ratings, so an E in 2008 might now be an F. But many early EPCs used (worst case) defaults as accurate information was not available, so their EPCs may now be better based on accurate data. Heating, lighting, ventilation or air conditioning equipment replaced since 2008 will have a better energy performance than the equipment it replaced.
“Assessors registered with CIBSE Certification are also certified as CIBSE Low Carbon Consultants able to advise their clients on energy improvement projects and on meeting the requirements of MEES.”
their property portfolio to better understand which properties are within scope of the MEES Regulations and whether exemptions might apply.
• Carrying out energy assessments to check whether the EPC ratings for their properties are correct.
With all these reasons why a current EPC may not be accurate, it is worth checking, and considering options such as engaging with tenants and entering into energy performance contracts where the capital costs of energy efficiency improvements are covered by the supplier and utility bill savings are shared for the benefit of both parties. There is also potential to increase rental and asset value through energy efficiency improvements, possibly alongside other upgrades: a likely side effect of MEES is to strengthen the linkage between the EPC Rating of a property and its value.
Accuracy and advice All of this requires an accurate EPC. Whilst an EPC assessor should have these skills, assessors registered with CIBSE Certification all have skills beyond the ability to produce EPCs and the associated Recommendation Report. They are not only EPC assessors, but are also certified as CIBSE Low Carbon Consultants able to advise their clients on energy improvement projects and on meeting the requirements of MEES. ■ For more information and to access the CIBSE Certification online register of assessors, please visit www.cibsecertification.co.uk
• Understanding how lease terms, break dates, renewals dates and planned refit periods fit with MEES.
• Reviewing their leases to understand their rights.
WWW.CIBSE.ORG
CIBSE GUIDE TO BUILDING PERFORMANCE 2019 |
41
SOURCING PRODUCTS & SERVICES
Panasonic fits the bill for Major Retailer’s London Head Office Being set challenging air conditioning projects by blue chip retailers is nothing unusual for AMP & Panasonic.
O
ur recent project for one of the UK’s well-known brands, created air conditioning equipment design and selection difficulties, and the added pressure of a shortened programme and restrictive logistical/AC equipment locating difficulties, the gauntlet was down, and the challenge was on. The project completion date was midDecember 2018 with a start date of early September 2018 giving approximately 3 months overall. Working hand in hand with S&G Air Conditioning Contracts Ltd, AMP set about putting a Panasonic heat pump VRF scheme together to replace the existing unserviceable chiller equipment and chilled beams serving 2 floors of their offices.
42
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
The AMP solution was to replace the existing system with six Panasonic ECOi heat pump VRF systems connected to cassette fan coils serving all cellular offices and open plan zones, which would provide the client with optimum heating and cooling across their office space. With our solution agreed by the clients’ consultant, we pushed ahead in putting together a logistics plan for positioning the VRF condensers on the roof of this 10-storey building. Ordinarily this is not an issue, when employing a crane, but unfortunately on this project the use of any mechanical lifting or crane-age was out of the question due to timescales and road closure constraints. It was then that a strip down and re-build of the external VRF condensers was considered. To enable the work to begin, the condensers had to be professionally dismantled into more manageable sections at AMP’s head office, under controlled conditions, then the equipment was be transported to site for manual handling to the 10th floor roof.
The condensers were taken to the 8th floor level via the on-site goods lift with the final two floors to roof level being negotiated by manual lifting/handling. Once this this logistical plan was agreed and in place the next phase before starting on site was to agree what Controls & BMS protocol was required. With a mixture of open plan office zones, cellular offices and meeting rooms, on both floors, it was decided to have standard Panasonic CZ-RTC5B Controls to all areas and zones with the addition of the Panasonic Eco-Navi smart sensor control covering each of the single cassette offices and meeting areas. The Eco-Navi addition in the cellular areas would ensure an energy conscious regime would be delivered. Each floor would have its own Panasonic CZ-256ESMC3 touchscreen centralised control to act as floor by floor supervisory control and monitoring stations. The existing BMS protocol was operated by Trend, so we installed the Panasonic ECOi P-Link BACnet “Open Protocol” BMS Interface, which seamlessly integrated with their existing system, to cover all the Trend monitoring and controls needs to. With all the main project specifics agreed and in motion, the project was then expanded to include secondary Panasonic Mini ECOi heat pump VRF systems to take care of the IT & server rooms. It was decided that the systems in the IT/ server room run independently of the main system, understanding that a set temperature needed to be maintained at all time so that the IT equipment would not overheat. With the design & planning processes complete the Panasonic Air Conditioning and Controls could then be delivered and installed over a six to eight-week period which due to the detailed planning went like clockwork with great teamwork between AMP & S&G Contracts Ltd. AMP Technicians helped to commission all Panasonic elements of the project to ensure that S&G Contracts Ltd delivered the project on time with the Retailer being both pleased and environmentally comfortable in time for Christmas. ■
Brighter solutions for superior aesthetics and better environments Our bespoke roof glazing solutions and continuous rooflights deliver outstanding natural light, help cut energy costs and enhance internal spaces.
Discover the possibilities, call us today. www.whitesales.co.uk | sales@whitesales.co.uk | 01483 917580
SOURCING PRODUCTS & SERVICES
Rethinking collection of data for energy upgrades By Andrew Boothroyd, Energy Upgrade and Service Director, Armstrong Fluid Technology
Reviewing an alternative approach to data collection and project implementation for energy upgrade projects, which can deliver quantifiable energy savings ahead of traditionally-timed implementation of replacement capital equipment, facilitate best-in-class system design, and provide persuasive data to win the support of stakeholders.
E
nergy upgrade projects requiring sign-off for capital expenditure frequently take as long as a year and a half to reach the implementation stage. Typically, the first 6 months are spent collecting data, months 6 to 9 involve a data analysis phase, then technology solutions and a business plan are developed in months 9 to 12. Over the next 6 months stakeholders make their decisions until (18 months after initial discussions) the project is implemented. During that year and a half, not a single kWh of energy is saved. By utilising the embedded software and connectivity of the latest generation of Armstrong DE (Design Envelope) pumps, however, the energy upgrade project phases can be optimised. The new Armstrong DE pumps can be installed ahead of the rest of the project, exploiting the in-built performance monitoring functionality of the pumps to
44
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
“Using the advanced Active Performance Management software within the Design Envelope pumps allows up to 10% of the total system energy to be saved more than a year ahead of full implementation of the upgrade.”
collect and report the necessary data, instead of installing flow meters to complete this task. Building owners and occupiers can then begin to save energy from day 1, month 1 of the initial discussions, rather than having to wait until traditional implementation. Using the advanced Active Performance Management software within the Design Envelope pumps allows up to 10% of the total system energy to be saved more than a year ahead of full implementation of the upgrade. The Armstrong DE pump’s embedded technology continuously measures the pump flow, head and power. This data can be used in conjunction with system temperatures to generate a system-specific load profile and harvest much of the data traditionally acquired through the initial phase of the upgrade process (usually the first six months). In months 6 to 12, load-specific information obtained through the pump’s advanced performance management software can then assist the system-designer with the selection of main plant equipment. The quality and accuracy of the data also helps the system designer to determine which system modifications will be the most beneficial, enabling capital expenditure costsaving opportunities to be identified.
As the newly-installed pumps begin to save energy as soon as they are installed, regular measurable energy savings are achieved throughout the design and decision-making process. These early system improvements can be demonstrated to stakeholders, articulating energy savings from day one, helping to build credibility, confidence and an improved cash flow (feasibly positive from day one with Armstrong financing). The business case for the energy upgrade essentially writes itself. To discuss this approach in more detail, contact Armstrong Fluid Technology. Tel: +44 (0)8444 145 145
About Armstrong Fluid Technology
With over 1000 employees worldwide, operating seven manufacturing facilities on three continents, Armstrong Fluid Technology is known around the world as a forerunner and innovator in the design, engineering and manufacturing of intelligent fluid flow equipment. With its expertise in fluid dynamics, heat transfer, variable speed, and demand-based control, Armstrong Fluid Technology leads the fluid systems industry, including HVAC, plumbing, and fire safety in providing the most energy efficient and cost effective solutions to building professionals and owners around the globe. ■
THE HEART OF YOUR BUILDING NOW HAS A BRAIN Mechanical equipment, cloud-based analytics and digital controls perfectly integrated for reliability and efficiency that no other company can match.
energy efficient innovation
energy efficient innovation
armstrongfluidtechnology.com
LEGISLATION
Collaboration central to CPD success Stewart Jones, Customer Technical Advisory Engineer, Conveyance Tubes at Tata Steel explores the merit of combining academia with practical industry knowledge to deliver accredited CPD courses, while addressing a wide range of industrial challenges and risks.
W
ithin the Building and Industrial Services Sector, particularly in the area of correct pipework specification, selection and compliance, there is a clear need for Continuing Professional Development (CPD) as many engineers still refer to withdrawn and outdated standards. For example, BS1387 and API are still commonly specified tube specifications, even though BS1387 was withdrawn in 2004 and API is actually an American line pipe specification, so is not a harmonised standard in accordance with relevant Regulations or Directives, such as the CPR (Construction Products Regulation) or the PED (Pressure Equipment Directive). Specifying withdrawn legacy standards can lead to procurement and compliance issues, incorrect or poor quality products getting into the supply chain, and issues with technical and service life performance that may result in early failures or increased maintenance costs throughout a building’s lifespan.
46
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
By attending appropriate CPD courses it is possible to keep up-to-date with the latest processes, products and standards, as well as technical advances, such as BIM (Building Information Modelling), as well as the use of VR (Virtual Reality) and other new methods of working. To address the pipework and challenges now faced by building services engineers, specifiers and designers, initiatives such as BISPA (the Building & Industrial Services Pipework Academy), at the School of Architecture, Building and Civil Engineering, Loughborough University, have been established. BISPA is a collaborative endeavour, combining the academic knowledge of both Loughborough and Cranfield Universities with the practical and manufacturing expertise of Tata Steel and its Tubes business. By providing a range of courses spanning all knowledge levels from novice to advanced, BISPA caters for those beginning their CPD journey as well as professionals looking to gain a more detailed insight into pipework specifications, installation best practice, corrosion awareness and the use of BIM and VR. Attendees will gain first-hand experience of using BIM software to create and modify
models in hands-on practical sessions aimed at both intermediate and advanced levels. Also within the facility are several pipework training rigs, which provide engineers with the opportunity to carry out installations and training activities. By providing a safe and controlled environment to perfect their skills, with the support of industry experts, attendees will feel confident when approaching challenges whilst on-the-job. In association with Tata Steel, course attendees will also explore the two main methods of manufacturing carbon steel welded tubes, hot-finished and cold-formed. Although these processes create products of a similar specification, they actually perform quite differently in service due to underlying factors and properties. Attendees will learn all about the technical advantages that the premium hot-finished tubes have over commodity cold-formed ones. BISPA’s corrosion CPD covers the issues associated with galvanic corrosion reactions and the risks seen when using stainless steel within traditional carbon steel and copper pipework systems. Whilst there is a perception that stainless steel is corrosion resistance, it can actually corrode, become easily contaminated, or result in increased corrosion within other parts of the system. So requires a very different mind-set during storage, fabrication and installation. Other variables that affect a product’s service life, such as pressure ratings, heat transfer, joint construction and integrity, are also covered by BISPA courses, enabling participants to obtain a thorough understanding of the main factors influencing pipework design. The accredited CPD courses provide clear guidance, enabling attendees to develop and further their career, and are approved by the Chartered Institute of Building Services Engineers (CIBSE) Attending academic and industry created CPD courses is essential for every profession for career progression as well as for improving best practice within the industry. For building services engineers and consultants who create pipe and tube specifications, CPD is essential to ensure that up-to-date standards are specified and that the correct materials are used in order to prevent the possibility of failures throughout the building’s lifespan. ■ For more information on BISPA, please visit: www.bispa.org
HOT-FINISHED VS. COLD-FORMED TUBES Whilst all tubes may look the same, they are not. Our InstallÂŽ Plus 235 hot-finished carbon steel tubes, based on EN10255/10217-2 Grade S/P235GH (GH=Get Hot) are technically superior to cold-formed alternatives. Our hot-finished tubes do not have a Heat Affected Zone (HAZ) as this is fully removed during hot-manufacturing, resulting in a superior product as it has: n n n n n n n n n n
An ordered and consistent microstructure. No internal stress that can promote cracking. Consistent and reliable mechanical properties. Improved structural integrity and ductility. Improved and consistent toughness. Higher pressure integrity. Greater factor of safety. No loss of strength during additional welding or heating. Improved performance against corrosion. Ability to be bent to tight radii without splitting, creasing or collapsing.
For more information contact: T: +44 (0) 1536 404561 technicalmarketing@tatasteel.com
www.tatasteelconstruction.com/hotvscold
CPD BIM and pipework training courses Established to support industry, we offer a range of courses and networking opportunities to improve the awareness of pipework specifications and new innovations such as BIM (Building Information Modelling). Our courses are CIBSE approved and provide both classroom and hands on training. Visit our website or contact us for further details.
CONTACT N Mark Owens E info@bispa.org T +44 (0) 7770 644364 W www.bispa.org
LEGISLATION
Non-domestic Energy Performance Certificates By Samuel Maddock MSc, MSc Sustainable Building: Performance & Design Director/Sustainability Consultant, SUS Consultants
Non-Domestic Energy Performance Certificates (NDEPC’s) have recently come to the attention of property-owners since the UK Government announced the introduction of Minimum Energy Efficiency Standards (MEES) to existing rented commercial buildings in April 2018.
T
he requirement calls for all buildings that hold a NDEPC to achieve a rating of ‘E’ or above. The incentive behind this movement is to reduce building sector energy consumption as a response to climate change, and the commitment to reducing the UK’s carbon emissions. Approximately 16% of the non-domestic building stock will need to make energy-efficiency improvements to achieve compliance with this new regulation. Failure to comply may result in landlords being unable to let the property to new or existing tenants. NDEPC’s are used to target a large expanse of the building sector, where buildings with the least energy-efficient services installed can be identified. The NDEPC Register is an effective way of monitoring this on a national scale, as all commercial buildings which meet the criteria will have an EPC under regulation. Until recently, NDEPC’s have been viewed as a ‘tick box task’ towards Part L building compliance for new buildings, but they contain a great deal of important information useful to the building owner and building users, especially in existing buildings. The structure of an EPC identifies the efficiency of building services, including; heating, ventilation, air-conditioning, hot water, and lighting systems. It also includes
48
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
the thermal performance of the building envelope. An EPC acts as a quick and costeffective method of identifying energyefficiency in buildings by comparing the building services against current benchmarks for minimum energy efficiency standards. This information is easily accessible to the building owner and can be utilised when informing the potential replacement of building systems to improve the overall energy efficiency of the building. So, a building’s EPC is the single trigger when it comes to the enforcement of MEES, which could result in extensive and costly renovation to improve the overall efficiency of a building. Non-Domestic Energy Assessors, like myself, have a lot of responsibility in ensuring the EPC reflects the true efficiency of a building, and that best EPC rating can be achieved. If a landlord has a property which triggers MEES, the first point of investigation should start with the current EPC, which has identified the building with an ‘F’ or ‘G’ rating. There are different levels to an EPC assessment, which either use a steady-state calculation or Dynamic Simulation Modelling (DSM). Both routes can be used to produce NDEPC’s, but they are dissimilar in that a steady-state calculation uses one data set per month, whereas a dynamic simulation utilises hourly data sets. Such differences can have
a huge impact on the EPC rating. For example, in commercial buildings that use forced ventilation by central fans, DSM can potentially improve the rating to avoid the implications of MEES. If a new EPC needs to be produced the landlord should assist with gathering as much information as possible for the Energy Assessor to maximise the rating. This can include operation and maintenance manuals, equipment data sheets, service records and drawings, access to the Building Management System (BMS), and arrange communication with the building services engineer. If an EPC has been carried out to its maximum potential and still achieves an ‘F’ or ‘G’ rating, then landlords will need to ensure improvements are made and show that their property complies with current standards for energy efficiency by law. This could mean that existing building services and plant equipment will need to be replaced for new high-efficiency types, which is likely to require large investment from the property-owner. This is an opportunity to introduce energy management into existing buildings without strategies already in place, as well as improving energy efficiency. By doing so, it is possible to reduce the operational and maintenance costs of the building, which could prove beneficial when leasing the building and protecting its future asset value. ■
“A building’s EPC is the single trigger when it comes to the enforcement of MEES (Minimum Energy Efficiency Standards), which could result in extensive and costly renovation to improve the overall efficiency of a building.”
Building Compliance & Energy Management Full compliance with: Energy Management (ISO 50001) Energy Performance Certificate (EPC) Building Regulations UK Part L (BRUKL) Simplified Building Energy Model (SBEM) Energy Savings Opportunity Scheme (ESOS) Minimum Energy Efficiency Standard (MEES) SUS Consultants provide building compliance and energy management for new and existing commercial properties. We see Government obligations as constructive opportunities to coordinate simple energy management into the function of buildings, benefitting the people who own them and use them. Our services ensure your premises complies with current building legislation whether you are protecting future assets, designing a new-build, or want to reduce existing energy consumption.
www.susconsultants.co.uk info@susconsultants.co.uk 02034 880 865 07944 272 353
Experienced consultancy with experienced people: • • • • •
Research-led sustainable design consultants Accredited CIBSE Low Carbon Energy Assessors Accredited CIBSE ESOS Lead Assessors Accredited CIBSE Low Carbon Consultants Dynamic Simulation Modelling Engineers
LEGISLATION
Underground Thermal interference in Ground Source Systems
P
opularity of ground coupled heat pump systems is increasing throughout Europe. As more systems are installed, the consequence is that thermal interaction between neighbouring systems is becoming a concern. As temperature effects of individual loops over time gradually move in to each other’s sphere of influence, temperature effects add up due to superposition. Many small effects can in the longer term (> 25 years) lead to loss of efficiency or even the inability to use ground source at all. Standard available design software such as EED, cannot calculate thermal effects between different systems and to quantify effects, elaborate and expensive specialist computer modelling has to be undertaken.
50
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
Robust method developed Groenholland has developed a quick and robust design tool (BUM/HUM method) that allows to effectively quantify the thermal effects between interacting locations and to correct the design of the ground source installation for the occurring temperature loss per location. The method was developed as an objective and relatively simple to use tool for the Dutch ministry of the Environment under the new ground source law (AmvB bodemenergie, 2013). The tool takes in to account the distance between interacting locations (up to a 120 meter radius), various standard soil thermal conductivities and the nett annual thermal extraction from the ground. Currently (2019) a new largely automated version of the tool is under development. Planning tool for ground source systems Another development at Groenholland is a tool for planning ground source systems in small or large scale building developments. The tool (iEEP – intelligent Earth Energy
Planner) allows the calculation of allowed energy extraction budgets per surface area (allotments). Currently, when using ground source, it is first comes first served, creating problems for latecomers wanting to use ground source heat pump systems. With the allocation of energy budgets, independent of actual system design, a limit is put on the allowed thermal interference between systems. Energy budgets are distributed as equally as possible and each system receives a specified minimum budget. Because of the very fast calculation used in the method, optimisation is feasible. International use Both above mentioned tools have generated international interest and the BUM/HUM method has been translated in to German and is undergoing it’s trials in customisation for the German market. As the underlying physics are universal the method can be applied worldwide, although always within a National or regional legislative framework. ■
Panasonic: 100 Years of Product Innovation, Leading the Way in R32 At Panasonic, we believe in technologies that improve people’s lives. Which is why we have developed a complete range of residential and commercial R32 systems that will offer you the solution that perfectly matches your project requirements. Available in an extensive range of capacities and styles - all complemented by excellent performance, efficiency and lower environmental impact.
R32 – a “small” change that changes everything
NEW 4 WAY 60X60 CASSETTE INVERTER • R32 GAS
R32 NEW REFRIGERANT GAS
NEW 4 WAY 60X60 CASSETTE
R32
A++
A+
R2 ROTARY
22dB(A)
-10°C
-15°C
R410A R22
BMS
R32
NEW REFRIGERANT GAS
6,50 SEER
Our heat pumps containing the refrigerant R32 show a drastic reduction in the value of Global Warming Potential (GWP).
Seasonal efficiency in cooling will bring you saving all year while heating. Energy efficiency rank from A+++ to D.
4,20 SCOP
Seasonal efficiency in heating will bring you saving all year while heating. Energy efficiency rank from A+++ to D.
COMPRESSOR
Inverter range provides more precise temperature control and keeps the temperature constant with lower energy consumption and a reduction in noise.
Panasonic R2 Rotary Compressor. Designed to withstand extreme conditions, it delivers high performance and efficiency.
SUPER QUIET
With Super Quiet technology our devices are much more quiet than a library (30dB(A)).
COOLING MODE
HEATING MODE
R410A/R22 RENEWAL
Down to -10°C in cooling only mode. The air conditioner works in cooling only mode with an outdoor temperature of -10°C.
Down to -15°C in heating mode. The air conditioner works in heat pump mode with an outdoor temperature as low as -15°C.
The Panasonic renewal system allows good quality existing R410A or R22 pipe work to be re-used whilst installing new high efficiency R32 systems.
INTERNET CONTROL
INTEGRATION P-LINE
This unit is Ready to be ready to connect integrated and to internet and be managed by be managed by Panasonic smartphone, centralized with a powerful systems with and user friendly CZ-CAPRA1 App to manage the comfort wherever you are.
CONNECTIVITY
Communication port to integrate the unit to home and building management systems most known standards.
5
NEW FLOOR CONSOLE TYPE INVERTER+ • R32 GAS
www.eggeassociats.net
· Easy to combine with standard 60x60 ceiling grid · New refrigerant R32 · High energy savings A+ · Quiet operation from only 23dB(A) · Drain pump included · Easy to install: Flexible piping length and compact outdoor · Can reuse old piping · Weekly timer wired control · Smartphone control (Optional) · Connectivity by KNX, Modbus and Bacnet (optional)
YEARS
COMPRESSOR WARRANTY
5 Years Warranty. We guarantee the outdoor unit compressors in the entire range for five years.
R32
NEW PACI STANDARD CEILING INVERTER+ • R32 GAS
NEW REFRIGERANT GAS
NEW FLOOR CONSOLE with new nanoe™ X air-purifying system: outstanding efficiency A++ and comfort combined with a breakthrough design
R32 NEW REFRIGERANT GAS
NEW PACI STANDARD CEILING INVERTER+ · Wide air distribution for large rooms · Horizontal air flow reaches max.9.5m. · Fresh air connection available on the unit · Slim design with 235m height fits narrow space · Silent operation · datanavi simple support tool app with remote controller (CZ-RTC5B) · Twin, Triple and Double-twin split options · Easy connection and controlled of external fan or ERV using the connector PAW-FDC on the indoor unit PCB. The external device can be control by the remote control of the Panasonic indoor unit This data refers to specific units in the line-up, see full leaflet for technical details of each model.
R32
A++
A+
6,50 SEER
4,20 SCOP
Seasonal efficiency in cooling will bring you saving all year while heating. Energy efficiency rank from A+++ to D.
Seasonal efficiency in heating will bring you saving all year while heating. Energy efficiency rank from A+++ to D.
-10°C
-15°C
R410A R22
BMS
R32
NEW REFRIGERANT GAS
Our heat pumps containing the refrigerant R32 show a drastic reduction in the value of Global Warming Potential (GWP).
COOLING MODE
Wider operation Hz range of compressor realize more high efficient operation through the year. For Big PACi Series PE2.
The air conditioner works in cooling only mode with an outdoor temperature of -10°C.
HEATING MODE
The air conditioner works in heat pump mode even when outdoor temperatures are as low as -15°C.
R410A/R22 RENEWAL
The Panasonic renewal system allows good quality existing R410A or R22 pipe work to be re-used whilst installing new high efficiency R32 systems.
INTERNET CONTROL
CONNECTIVITY
Next generation system providing a user-friendly remote control of air conditioning or heat pump units from everywhere via internet.
Communication port to integrate the unit to home and building management systems most known standards.
5
YEARS
COMPRESSOR WARRANTY
5 Years Warranty. We guarantee the outdoor unit compressors in the entire range for five years.
Discover the range now at www.ampair.co.uk or call us on 01707 378 670
ISO 50001
ISO 50001: effective management of your energy use Many UK businesses are looking to increase efficiency and reduce energy costs. Whether as part of an overall corporate strategy, a route to organisational efficiency or a key focus of a cost or carbon reduction drive, monitoring and managing your energy use effectively makes sound business sense.
I
SO 50001, the globally recognised energy management standard developed by the International Organisation for Standardisation, is the key tool in that process.
Your route to business benefits It provides a framework for effectively managing the energy that an organisation uses in its premises. It helps organisations understand where they are using energy, how that energy use can be managed effectively, and how consumption and costs can be controlled into the future. The standard is effectively a framework to:
• Develop policies and approaches for the more efficient use of energy
• Help set your own targets and objectives • Use data to better understand and make decisions about energy use
• Monitor, review and improve on an ongoing basis. Conformity with ISO 50001 is a route to a range of business benefits: organisations demonstrate responsible and efficient energy management, and can provide returns in energy and cost savings, and employee engagement. It can also provide an important business edge in public relations and satisfying tender requests for responsible energy management.
Six steps to managing your energy use 1. ISO 50001 is a voluntary standard that can help you to manage the energy you use in your buildings more effectively and efficiently 2. The standard is a strategic business tool that helps you develop an energy management system that works for your business and operations
52
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
3. Under the ISO 50001 framework, you will develop your energy management policy and targets, and measure and monitor your energy use 4. The targets you set and data you gather will help guide business decisions on the most cost effective measures to help reduce energy consumption, benefitting your business and producing savings
5. To maximise the benefits of energy management, target third party certification to ISO 50001 using a UKAS accredited Certification Body, such as CIBSE Certification Ltd 6. Ongoing monitoring and review will help ensure you deliver on your targets and keep on seeing efficiencies and business benefits.
ISO 50001
The business opportunities ISO 50001 is a relatively new standard, but its uptake is growing rapidly. It is now applied by major brand names in manufacturing industries, retail, financial services, communications and many other business sectors in the UK and internationally. The standard is not only viable for major energy users: it will form part of an integrated approach to energy management, and provide broad opportunities for improvement.
How to make the most of ISO 50001 1. Save where it pays ISO 50001 is designed to help to monitor and manage energy consumption. It offers the potential to reduce waste, and to use resources efficiently. 2. Enhance reputation and brand Early adopters of ISO 50001 report that a key benefit comes from its value to reputation and public relations: it demonstrates commitment to best practice in energy management and to reducing environmental impact.
Alongside savings in energy, the standard can help organisations to drive reductions in carbon and in overall carbon footprint. Third party certification by a UKAS accredited Certification Body, such as CIBSE Certification, provides robust confirmation of conformity with ISO 50001. Organisations gaining certification can display the ISO 50001 and UKAS logos on their promotional material. 3. Build and maintain business resilience ISO 50001 helps to embed energy resilience into an organisation, by providing a mechanism for continuous checking and review. It forms a key element of a broader strategy to ensure an organisation remains fit for the future.
“Conformity with ISO 50001 is a route to a range of business benefits: organisations demonstrate responsible and efficient energy management, and can provide returns in energy and cost savings, and employee engagement. It can also provide an important business edge in public relations and satisfying tender requests for responsible energy management.”
4. Engage employees Using energy wisely can involve activity across a whole organisation. ISO 50001 is a catalyst for engagement and team building within an organisation, as employees can identify opportunities to save energy and lead and implement efficiency initiatives and programmes. 5. Set a framework for benchmarking and reporting ISO 50001 certification adds business rigour to everyday energy consumption. The standard’s framework for benchmarking and reporting requires organisations to develop policies, set targets, and monitor progress against them, using consistent data gathering approaches.
Want to know more? CIBSE Training provide a course designed for energy professionals who are looking to gain an in-depth knowledge of the ISO 50001 Energy Management Systems (EnMS) standard, and also those who are tasked with designing, implementing and maintaining an EnMS that complies with the ISO standard. ■ To find out more, visit: www.cibsecertification.co.uk/iso50001
WWW.CIBSE.ORG
CIBSE GUIDE TO BUILDING PERFORMANCE 2019 |
53
CYBER SECURITY
DE6.1: Cyber security in building services design DE6.1, part of CIBSE’s Digital Engineering Series, is intended to assist those that commission, design, construct and operate built assets in understanding the implications of security on building services design.
Buildings form an increasingly important part of our national infrastructure as their internal systems become ‘smart’ and connected. They are becoming correspondingly more vulnerable to attack by virtue of their increasing profile and accessibility. This publication will give readers an understanding of how to carry out a basic risk/ threat assessment, and to understand their own limitations — and thus help readers to decide when to seek expert help to ensure that building services designs do not cause undue weaknesses to be designed into these vital systems.
Contents of DE6.1
• Introduction • Scope • Terms and definitions • Analysis: Context Analysis; Risk Analysis Stage one: Setting the case for security; Stage two: Assess security requirements; Stage three: Understand the design; Stage four: Cause and effect; Risk Appetite; Solutions - Basic wins; Complex solutions • Conclusion The full set of titles within the Digital Engineering Series are listed below:
• DE1: Pre-qualification Questionnaires (2016) + Template - FREE TO ALL
“This guidance considers the risks and threats associated with security, and examines these in the context of building services design and how those considerations should change our approach to basic design considerations.” 54
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
T
hese implications may revolve around national security, commercial security or private security. Each will have individual requirements, and this publication looks to provoke thought in this regard. The solutions will be a matter for each individual organisation, company or person to ascertain. This guidance considers the risks and threats associated with security, and examines these in the context of building services design and how those considerations should change our approach to basic design considerations. It also identifies the need for dedicated security experts to review and feed into each design. Building services are increasingly part of the connected world, and this presents outside actors with opportunities to interfere with these services for myriad reasons. Such interference can have commercial or functional implications, and can affect the safety of a built asset, but most of this interference can be avoided by implementing simple changes in design philosophy.
• DE2: Employer’s Information Requirements + Template - FREE TO ALL
• DE3: BIM Execution Plans + Pre-contract Template + Post-contract Template + Task Information Delivery Plan + Level of Definition Matrix FREE TO ALL • DE4: Common Data Environments • DE5: Asset Information Requirements + Template – FREE TO ALL • DE6: Security Requirements • DE6.1: Cyber security in building services design • DE7: Organisation Information Requirements + Template - FREE TO ALL • DE8: Project Information Requirements + Template - FREE TO ALL • DE9: Application of Soft Landings and Government Soft Landings in Building Services Engineering We have also provided templates that will help with organising Model Review Meetings. ■ For more information on DE6.1: www.cibse.org/de6For more information on the DE series: www.cibse.org/des
COMPETENCY MANAGEMENT
The competency conundrum in maintenance engineering To ensure engineers’ skills match their roles, organisations must continually assess the competencies of their workforce. CIBSE guide KS21 explains how competency management can be embedded in maintenance engineering.
P
art of CIBSE’s Knowledge Series, this guide on competency was published in 2018. Produced by the CIBSE Maintenance Task Group, in association with the CIBSE Facilities Management Group, the guidance offers an understanding of competence and competency, focusing on the management of building engineering systems in operational buildings. It explains what individuals and organisations need to do to become fully competent.
Competency for essential engineering, maintenance and repair KS21 Competency and competency management systems in facilities management, explains the steps organisations should consider taking to improve and manage the skills of workers. Its goal is to ensure that those involved in the operation, maintenance and management of buildings have the right level of competency to carry out essential engineering, maintenance and repair tasks. At the publication launch, co-author Jo Harris said it had been written because there was no single place to go to for information on competency in FM. This is essential because legislation is pushing organisations into ensuring individuals are competent (covered in the guidance). The challenge is, Harris continued, that there are fewer skilled engineers as a result of
WWW.CIBSE.ORG
apprenticeships being abandoned after the 2008 recession. ‘We have multiskilled people and we have diluted their knowledge. They can’t be jacks of all trades and still be competent in multiple areas.’ The guide has a particular focus on the management of competency in multidisciplinary teams. ‘A lot of managers are coming into FM from diverse backgrounds,’ said Harris. ‘They need to understand what they have to comply with and how they ensure teams are competent.’ Part of the effective management of competency is the keeping of records, says co-author Steve Gathergood, to ensure individuals’ skills are tracked over time. ‘The onus of proof of competence will always fall on the employer or organisation,’ he said.
The competence continuum Gathergood explained the competence continuum, which shows how the level of proficiency relates to the level of supervision needed. ‘Competency can be influenced by a number of external factors, such as a change in behaviour, technology or environment. It has to be continually assessed.’ By doing regular reviews, you are in a better
position to put in corrective actions, he added. For example, as an apprentice gains experience, is trained and acquires confidence, he or she moves to the right of the continuum and the line manager can step back. If the technology changes, a person may no longer be competent for the role, and will need to be retrained. The principles of the Competency Management System (CMS) are described in the guidance. The CMS cycle describes the five phases from establishing requirements and designing the CMS to implementation, maintenance, and review. ‘The aim is to ensure people are clear about what they have to perform, what’s expected of them, and how they can receive appropriate training to remain competent,’ said co-author Steve Hunter. ‘It is a strategic differentiator when you go out in the industry. It shows you have a good management structure backed up with evidence.’ Summing up at the launch, Harris said it was in everyone’s interest to monitor engineers’ competencies and to train them if they need more skills to carry out their roles. ‘Too many engineers bounce between contracts because they don’t feel valued. Task-based performance reviews can help overcome this.’ ■ KS21: Competency and competency management systems in facilities management is available from: www.cibse.org/knowledge First published in CIBSE Journal – www.cibsejournal.com
CIBSE GUIDE TO BUILDING PERFORMANCE 2019 |
55
HEAT NETWORKS
CIBSE Heat Networks Consultants CIBSE Certification is certifying individuals to become Heat Networks Consultants and have their name listed on the Heat Networks Consultants Register. Registrants on the CIBSE Heat Networks Consultants register have been certified by CIBSE Certification as competent to use the CIBSE CP1 Heat Networks: Code of Practice for the UK.
T
he government has announced the Heat Networks Investment Project (HNIP) which has funding of £320 million to support the aim of increasing the number of heat networks being built.
What can a certified Heat Networks Consultant do? CIBSE Heat Networks Consultants have been assessed on their knowledge and understanding of the Code of Practice. This will give clients employing CIBSE Heat Networks Consultants confidence that the guidance in the Code of Practice will be appropriately applied.
About Heat Networks Consultants District heating networks are now seen as one of the key solutions to deliver a low carbon energy economy, particularly in high heat density areas. If heat networks are to form a significant part of our future low
56
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
carbon energy infrastructure in the UK then they need to be designed, built and operated to a high standard to deliver customer satisfaction. A Code of Practice CP1 on heat networks has been produced by CIBSE and the Association for Decentralised Energy (ADE), in collaboration with the former Department of Climate Change (DECC), now part of BEIS. The Code covers all forms of district heating to assist in achieving that aim by raising standards right across the supply building heat to large city-wide schemes. It is designed to apply to both new networks and extensions of existing networks. Rather than just providing guidance, the Code specifies minimum requirements which must be met in order to produce a successful scheme and comply with the Code. Further information is also provided on best practice for those looking to move beyond the minimum requirements. Setting minimum (and best practice) standards should provide greater
confidence for specifiers and developers and the Code is already being used in the tendering/contracting process. To join the CIBSE Heat Networks Consultants Register, individuals must first pass an examination which assesses their competence to use the Code of Practice, and will then have to undertake Continuing Professional Development (CPD) to maintain their competence, as well as supply up to date proof of their employer’s Professional Indemnity Insurance (PII). ■ To find out more and search the online register: www.cibsecertification.co.uk/ heat-networks If you have a query about any aspect of the Heat Networks Consultants Register, please email epc@cibsecertification.org
GUILDFORD
BESA Tested
Guildford HIU Tested to the latest BESA Test Regime Oct 2018 Herz manufactured components Fully WRAS & KIWA approved dedicated Service Team UK based Technical Support with 5 Year Warranty available www.herzvalves.com
No meter creepage in standby 01483 502211
sales@herzvalves.com
Fire Protection Ltd is part of the Hotchkiss Group and one of Britain’s leading manufacturers and installers of fire-resistant ductwork. Our reputation for innovative technology and service reliability is industry wide and our fire resistant products and services safeguard many of Britain’s most prestigious buildings. Our pioneering fire rated ductwork systems result from expertise in two technologies - ductwork manufacturing, and the production of fire resistant coatings - creating an unrivalled system of fire protection - far in advance of more traditional competitor products. A continuous research and development programme ensures that we meet building specifiers’ most exacting standards, by setting new standards in the industry. Our products are exhaustively tested to meet, and often exceed, all relevant British, European and ISO standards. • Fire Protection Limited are committed to providing fire rated ductwork systems to meet British and European standards. We are strategically positioned to provide systems meeting the requirements of BS EN 1366 Parts 1, 8 & 9, in addition to our BS 476 Part 24 range of systems. • Our published Guidance Note has been widely recognised as an authoritative document covering the subject of fire resistant ductwork. • From a global perspective, Firespray International Limited provide our systems via an extensive network of approved licensees.
FIRE PROTECTION LTD Flamebar House, South Road, Templefields, Harlow, Essex CM20 2AR Tel: 01279 634 230 Fax: 01279 634 231 E-mail: info@fireprotection.co.uk Web: fireprotection.co.uk
CHALLENGES FOR 2019
The Grand Challenges for 2019 2019 threatens uncertainty and turbulence as the construction industry awaits the fallout from Brexit and what the implementation of Dame Judith Hackitt’s recommendations in the Independent Review of Building Regulations and Fire Safety mean for the sector. Liza Young of CIBSE Journal asked representatives from across the project supply chain what they need for the industry to deliver safe, comfortable and low carbon buildings.
“We are all responsible for delivering betterperforming buildings, regardless of our role. This requires all stakeholders to have an understanding of the effect of each other’s involvement in a project, and help clients achieve a building to perform as designed.” WWW.CIBSE.ORG
S
ome of the themes that emerge are the prioritising of health and wellbeing – particularly among clients and facilities managers – and some form of soft landings. Another priority was a call for more collaborative working to achieve a wellperforming building.
The facilities manager (FM): James Campbell, Troup Bywaters + Anders The FM team will have a significant part to play in achieving designed building performance, and the cost of non-performance will have a disproportionate effect considering construction cost, says James Campbell, strategic asset and facilities management partner at Troup Bywaters + Anders, and CIBSE Facilities Management Group committee member. FM teams need to be intrinsic to the construction process, because they will spend longer than anyone maintaining, operating and modifying the building to support the business and its occupants.
However, a significant delay in FM engagement during construction still exists. The BSRIA Soft Landings Framework has raised the profile and benefits of early engagement through to post-occupancy evaluations, but Campbell says soft landings is often considered a commissioning and handover ‘activity’ rather than the process starting at Stage 0, where it can deliver most benefit. Although Breeam construction standards have brought management, commissioning, aftercare and health and wellbeing to the fore, activities required to attain some credits – such as seasonal commissioning and postoccupancy evaluations – are done over a number of years, after construction, says Campbell. ‘It will again fall to the FMs to deliver these activities, so it seems logical that the later they are engaged in construction, the larger the performance gap will be during operation’. For buildings to perform, operational teams must know them intimately and understand the design philosophy of the systems and elements that influence building performance. ‘The value that FMs can bring will be proportional to this understanding, but FMs can’t be expected to gain this level of understanding if they are only engaged at commissioning – or, even worse, at handover,’ says Campbell. He adds that FMs need the support of their construction peers – architects, quantity surveyors, engineers and project managers – to raise the profile and benefits of early engagement and involvement throughout the construction phase to clients. The skills gap within the FM and building services industries can be reduced by active involvement through the construction phase, where FMs can gain first-hand experience of the technologies and construction methods used, says Campbell. Training and product knowledge can be gained through the support of manufacturers and installers. >>
CIBSE GUIDE TO BUILDING PERFORMANCE 2019 |
59
CHALLENGES FOR 2019
The consultant: Dave Grzelka, NPS North West Sound technical advice with in-depth knowledge of the sector is needed from manufacturers, says Dave Grzelka, building services engineering manager at consultant and site inspector NPS North West. As the designer’s remit is so wide, manufacturers need to cover their niche area comprehensively, have products ready in advance of any regulatory changes, and lead technological advance. ‘Manufacturers that are prepared to involve themselves in the commissioning process to enhance warranties are invaluable,’ says Grzelka. Every manufacturer will have the occasional supply or manufacturing blip, and their response to such issues will separate the fully rounded firms from those that are lacking, he adds. ‘Installers, or end users, need rapid and thorough responses to site or in-use issues. A manufacturer’s support team, which is able to respond quickly to commissioning or diagnostic problems with minimal delay, is important to achieving a successful project.’ From installers, Grzelka says the consultant needs a buy-in to the aims developed with the client, and a professional team ethic to overcome the inevitable site challenges as they occur. ‘A willingness to train operatives in new equipment and installation techniques is crucial to having a successful project,’ he says. ‘Proper planning of commissioning, with its inherent need for sequencing, and the necessity to involve the manufacturer’s team for full specialist commissioning are vital to give all available warranties to the client and offer optimum functionality.’
The consultant: Ashley Bateson, Hoare Lea Ashley Bateson, partner and head of sustainability at Hoare Lea, believes advancements in sensing and monitoring technology will be a great driver for improving the quality of the built environment. It will also challenge how the industry procures and manages buildings. Access to data on thermal comfort, air quality and other metrics in the workplace stimulates curiosity among office workers, he adds. ‘We find people are normally more interested to know about internal air quality than energy consumption. This is probably because factors that affect productivity and
60
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
wellbeing directly are more tangible than the cost of energy paid by an organisation.’ Bateson regards the democratisation of data as positive. ‘In the future, occupants will be asking how their comfort can be improved, with an expectation that employers should do something about it. Recently, we have noticed that teachers are getting more demanding about classroom comfort conditions, with one union suggesting internal conditions should not exceed 28°C, even though we are expecting a warmer climate.’ Access to good-quality data, however, will mean the industry will need to get better at delivering buildings that are fully tested and commissioned, with calibrated and validated monitoring devices, he adds. A soft landings approach to procurement will help deliver this, with greater attention to aftercare and outcomes.
The contractor: Pauline Madden, Shaylor Group Working collaboratively with industry peers and the supply chain is important for successful construction, says Pauline Madden, supply chain coordinator at Shaylor Group. ‘Bringing together dedicated teams with specialist skills and resources ensures the completed project performs to the highest possible standard,’ she adds. For a building to succeed, it is vital to understand: • The proposed use • Expected occupancy hours • How the building will be managed • Life-cycle running costs • Life expectancy of the building • Sustainability measures. Consideration of these helps identify the most suitable materials from a price, performance and appearance perspective, says Madden. It also aids the selection of an appropriate supply chain to meet building requirements. Shaylor Group’s prequalification questionnaire captures: relevant compliance, health, safety, environment and quality information; the Construction (Design and Management) Regulation requirements; capabilities; and specialisms.
‘This enables us to determine the most suitable sub-contractors for the project,’ says Madden, ‘ensuring a collaborative approach and a shared desire to produce an end product that meets the client’s expectations.’ The use of modern technologies equips the delivery team with a method of planning, designing, constructing and managing the works, she adds. The firm’s dedicated BIM department also brings efficiency to the design process by coordinating required services with the building fabric across the life-cycle of a project. ‘No matter the scale, location or sector, collaborative working, extensive project understanding, appropriate supply chain selection and new technologies are all factors in creating a building that performs.’
ISO 50001
The client: Nick Lee, CEG As a long-term investor, it is fundamental to carry out post-occupancy analysis on projects, says Nick Lee, development director at property company CEG. The firm’s project Number One, Kirkstall Forge, has been recognised for its emphasis on design and health and wellbeing. ‘What we really value is how buildings work for the people within them, and ensuring they create positive working environments. We monitor these continually to see if we can further optimise conditions, focusing on ensuring the environment is healthy and not using power unnecessarily – benefiting the planet and reducing operational costs for occupiers,’ says Lee. He adds that CEG is driven by its ability to demonstrate technically – as well as subjectively – that its buildings are better places. ‘Our customers are the occupiers, and their focus is recruiting and retaining the best staff. So our driver is to create good working environments that support these business objectives. If the place works well for its people, it is good for everyone involved.’ ■
Brexit and a potential no deal Julie Godefroy, CIBSE technical manager, says legislation already exists in the UK on energy and carbon, independent from the EU, so – in the short to medium term – there shouldn’t be too much impact after Brexit. The Clean Growth Strategy also gives some direction and co-operation will continue, through industry bodies, on things such as BSI and EN standards. The bigger impact may be felt on staff, expertise and the import of materials, she adds. The white paper on post-Brexit immigration implies that EU workers will be treated in the same way as non-EU ones, so visas will be available for ‘skilled workers’ with a salary of £30,000 or more. ‘But that is not what most engineering graduates will earn,’ says Godefroy. This could bring an upward push on salaries – good for workers, maybe less so for employers. Long term, Godefroy says, it might help to address the undervaluing of engineering, encouraging more students to take up the profession. The £30,000 figure will be consulted on. Supporting visa applications is a difficult and costly process that big firms can absorb, but which can be too much for smaller ones, she adds.
Regulations in 2019 CIBSE technical director Hywel Davies summarises what regulations to look out for in 2019: • The upcoming consultation for Conservation of Fuel and Power: Approved Document L, which will include overheating, is expected to be published in the spring
• The government is calling for evidence on the future technical guidance contained within Approved Document B (fire safety). The consultation closes at 11.45pm on 1 March 2019
• The government has published its implementation plan in response to Dame Judith Hackitt’s Independent Review of Building Regulations and Fire Safety
• The government will have to find a way of implementing the latest revision to the Energy Performance of Buildings Directive, published in June 2018. The deadline for this is 2020.
Article first published in CIBSE Journal – www.cibsejournal.com
CIBSE GUIDE TO BUILDING PERFORMANCE 2019 |
61
CIBSE TRAINING
Take control of your development
CIBSE Training regularly presents courses purpose designed for FMs, Building Managers and those wanting to achieve a level of awareness of how building services and electrical systems operate within commercial buildings, including: Facilities and Building Managers; Building Service contractors; Project Managers; Mechanical & HVAC Engineers; Architects; Energy Assessors; Air Conditioning Inspectors Attended in recent years by hundreds of these professionals, courses include:
Building Services One Day Overview
Building Services Explained (3 Days)
Covers building services in commercial buildings. The course looks at heating and cooling systems, how to use them efficiently and how they fit within a building. Electrical and renewable systems are also covered allowing you to understand their considerable impact on the building’s energy use. This course is suitable for facility managers and all those responsible for the management and maintenance of building services but without formal training in this area. For more information visit: www.cibse.org/Facilities-Management
Three-day course covering building services in commercial buildings and looking at the heating and cooling systems, how to use them efficiently, and how they fit within a building. Electrical and renewable systems are also covered allowing the delegate to understand how they can have a considerable impact on the building’s energy use. A section on Maintenance and Legislation highlights the importance of regular maintenance and keeping up to date with current legislation.
62
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
Practical Project Management The aim of this course is to understand the project manager role in the building process for design and construction, and introduce and review the CIBSE/CIOB/ RIBA/RICS/ICE Code of Practice for Project Management in the construction industry. Explains the strategies and gives practical advice for managing projects successfully. Answers questions and provides possible solutions to delegates’ current project work issues. Suitable for anyone involved in or requiring knowledge of the project management of the design and construction process: engineers, designers, project managers, architects,
CIBSE TRAINING
surveyors, buyers, commissioning, facilities and maintenance managers. Successful Design Management The aim of the course is to understand the design process, and its management, and stages of design, effects of procurement options, action plans, organisation, project culture, defining tasks, planning and control, evaluation and management of information, essential actions. To answer questions and provide possible solutions to delegates’ current project work issues. For anyone involved in or requiring knowledge of the project management of the design process in the construction industry, designers, engineers, project managers, architects, surveyors, buyers, commissioning, facilities and maintenance managers. For more information visit: www.cibse.org/Project-Management
Electrical Services Explained (3 Days)
Mechanical Services Explained (3 Days) Many people find themselves needing to deal with mechanical building services but have not received training in mechanical services. Engineering services in buildings are complex and often account for more than 40% of the capital cost of a building. Increasing demands to conserve energy and improve environmental performance mean that good
• are specialist in another branch of engineering but now have to understand mechanical services systems (for example Electrical Engineers, part of a multi-discipline team). “This course covered every aspect that I was looking to have a more thorough understanding of...” “Exceptional course and information.”
Mechanical Services 1 Day Overview Heating, cooling and ventilation are increasingly important in delivering productive and healthy workplaces, with recent warm summers highlighting the importance of mechanical services that are efficient and effective in delivering good internal environments. The course will cover the principles of design and loading calculations for mechanical services and the influence of carbon reduction and sustainability on the selection of systems and plant. Mechanical services providing comfortable and healthy environments in buildings are at the forefront of sustainable building design and delivery. They are a key element of building energy use and integration with architecture and form. This course will outline: building design and legislation influences on plant and system selection; key parameters in system choices for heating cooling and ventilation; the role of commissioning, testing and soft landings. For those wishing to get an overview of mechanical services design and the motivation for design choices. This includes those at the start of their design careers, electrical services engineers, property professionals, estate managers and client briefing teams. ■ For more information visit: www.cibse.org/Mechanical-Services
“Engineering services in buildings are complex and often account for more than 40% of the capital cost of a building. Increasing demands to conserve energy and improve environmental performance mean that good design, efficient operation and reliable maintenance of services have never been more important.”
Provides grounding in electrical services and equipment and a better appreciation of many of the issues associated with design, installation and maintenance of electrical systems. Delegates will develop their own engineering judgments and confidence when dealing with electrical issues. “Great delivery of electrical services – knowledgeable lecturer, and very helpful...” “My electrical knowledge has improved drastically thanks to this course.”
Key Areas include: legislation & guidance; basic electrical principles; HV & LV electricity generation; high voltage distribution and switchgear; transformers and substation design; low voltage distribution and switchgear; alternative and standby power supplies (generators and UPS); dangers of electricity and physiological effects of electric shock; explanation of short circuits and fault currents; protective systems using fuses and circuit breakers; lighting & lamps with simple design calculations; wiring systems and final circuits, differences between the ring and radial final circuits; examples of cable sizing calculations;
WWW.CIBSE.ORG
overview of BS7671 Wiring Regulations and Electricity at Work Regulations; inspection and testing and certification to BS7671 IEE Wiring regulations and EAWR; periodic inspection and testing of existing installations and Portable Appliance Testing; certification and reporting. For more information visit: www.cibse.org/Electrical-Services
design, efficient operation and reliable maintenance of services have never been more important. An understanding of the issues and their engineering background is exactly what this course intends to achieve. The course serves as an introduction to common HVAC systems. Heating, cooling, ventilation and water systems are all covered including important legislation. It reviews principles and provides knowledge and awareness of how and why many different mechanical building services systems are designed, operated and maintained. The course is ideally suited to those who: • have been given additional responsibility for mechanical engineering services • have responsibility for estates and engineering personnel or contractors • are Facilities Managers with overall responsibility for buildings and their services
CIBSE GUIDE TO BUILDING PERFORMANCE 2019 |
63
FIRE DETECTION & PREVENTION
Honeywell Advanced Detection – Adding smoke detection to building refurbishment projects The current levels of building and construction activity in the UK is approximately 60% of new build, whilst 40% is refurbishment and maintenance. When designing new buildings, the implementation of smoke detection can be factored in at the beginning of the process, however when dealing with refurbishments and maintenance this means you must work within existing structures and additions.
H
“The Agile Wireless Fire Detection System is a newly designed platform of wireless fire devices suitable for applications where wired fire devices cannot be installed for economic or aesthetic reasons making them ideal for a refurbishment project.”
oneywell’s Advanced Detection portfolio of smoke detection systems can cater for both scenarios but on refurbishments there are several options that can be provided. The Agile Wireless Fire Detection System is a newly designed platform of wireless fire devices suitable for all applications where wired fire devices cannot be installed for economic or aesthetic reasons making them ideal for a refurbishment project where they can be added to an existing smoke detection infrastructure. Using advanced MESH network technology, Agile offers far better performance than traditional wireless detectors (which typically feature a Star network configuration, where each device has a single communication to a central hub). Agile’s MESH network provides bi-directional communication paths to each wireless device for highly reliability and immunity to broken links. These wireless devices can be seamlessly integrated into existing panels supporting Series 200 protocols, giving the fire system the flexibility to be easily extended. Agile offers the best of both worlds, behaving just like a wired system on the fire panel (with the ability to switch between as many as 18 radio channels and two antennas per device). The system also uses an intuitive 3-in-1 software - AgileIQ™ - that simulates the
64
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
system design, checks all critical links (in line with EN-54-25 requirements) and even provides battery life predictions. These aspects combined with the use of a dongle for remote access to the system, can dramatically speed up site surveys, system quotations and ongoing maintenance. The wireless detectors use the Agile IQ software to enable easy design, configuration and maintenance. With aspiration, again Honeywell have the flexibility to deliver cost effective solutions in the deliverable of refurbishment. The VESDA-E VEA is as solution that can be used in this scenario. The VEA uses a microbore flexible pipe which are easy to install with push-fit connections and can make installation in existing infrastructure easier than running the traditional 25mm pipe. Each VESDA-E VEA has up to 40 microbore tubes which can be up to 100m in length enabling routing through an existing building space a much easier task. The VEA
has one unique feature when it comes to aspiration, each of the 40 tube is addressable allowing pinpoint detection of any smoke incident. VEA actively draws air through the 40 sample points and analyses each for the presence of smoke particles in a centrally located smoke sensor module. At the location of the VEA you can then run a centralized test and maintenance on all the sample points reducing the service time by up to 90%, allowing servicing of up to 500 addresses a day lowering total cost of ownership by up to 60%. So, when looking at this unit for a refurbishment project, it has several advantages. You can run the flexible pipes through and around existing infrastructure, the sample points are discreet enough that they can be added anywhere and you can deal with the service and maintenance of the system in a way that does not disrupt any ongoing business. The construction industry never stands still and with the pressure on delivering flexible buildings for a variety of uses in intense. Offices are being turned into flats, existing warehousing is being added to, offices are becoming more flexible spaces. The refurbishment of these spaces throws up different challenges and Honeywell are there to meet these in whatever form they take. Having flexible solutions provides options and the expertise of an industry leader is there to advise and deliver those choices. ■ To find more about the VESDA-VEA go to www.xtralis.com or for the Agile wireless www.SystemSensorEurope.com
Quickest, most cost-effective route to the safest refurb & retrofit Over 40% of all build activity in the UK is refurbishment and maintenance creating the need for easy-set-up, engineer friendly systems that can adapt quickly to meet changing site needs, while enhancing safety in the most cost-effective and unobtrusive way. AGILE WIRELESS DETECTORS • MESH technology for increased reliability – behaves just like a wired system with much quicker install and commissioning capability
www.systemsensoreurope.com VESDA-E VEA • Pinpoint addressability with 40 addressable microbore tubes with individual sampling points
www.xtralis.com
FIRE DETECTION & PROTECTION
Smoke control systems – competency is key In the event of a fire, the build-up of deadly smoke can reduce visibility, cause confusion and eventually overcome occupants long before the fire itself becomes life-threatening.
U
nless smoke is controlled and properly ventilated, escape routes can become inaccessible – both for occupants trying to escape and for firefighters entering the building. A robust smoke control system which has been properly designed, installed and maintained can ultimately save lives when incorporated into a wider fire engineering strategy.
When a fire takes hold, a well-designed and correctly installed smoke control system can: • Keep escape and access routes free from smoke • Facilitate fire-fighting operations • Delay or possibly prevent flashover, reducing the risk of the fire developing further • Protect the contents of the building from smoke damage • Reduce the risk of structural damage to the building Following the tragic Grenfell Tower fire, a number of organisations were brought together to form a steering group capable of taking forward the key recommendations laid out in Dame Judith Hackitt’s Independent Review of the Building Regulations and Fire Safety. Work has subsequently begun to improve competences for those working on the design, construction and operation of higher risk buildings and this encompasses installer competence, product testing and certification. The Smoke Control Association (SCA) has offered advice on improving guidelines within the Building Regulations and its members are fully committed to applying the latest standards for product testing, certification and system design. As is the case with other specialist sectors within the built environment, the smoke control industry has, until now, remained unregulated, making it difficult to
66
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
assess the overall competence of suppliers and contractors. However, it is critical that smoke control systems are installed and maintained by a competent person with the necessary expert knowledge in order to ensure optimum performance should a fire break out in the building. As part of a sustained campaign to raise standards, all SCA members who install smoke control systems are now required to apply for and receive SDI 19 Certification scheme accreditation, guaranteeing that they are suitably skilled and experienced in fire strategy verification, system design, installation and commissioning in accordance with the following standards and industry guideline documents:
“Following the tragic Grenfell Tower fire, a number of organisations were brought together to form a steering group capable of taking forward the key recommendations laid out in Dame Judith Hackitt’s Independent Review of the Building Regulations and Fire Safety.”
• Approved Document B • Approved Document B NI (Northern Ireland) • Technical Handbook (Scotland) • BS 9999 • BS 9991 • BS 7346 Parts 4, 5, 7 and 8 • BS 8519 • BS 8524 • EN 12101 Part 6 • Technical Reports 12101-4 & % • SCA Guidance Documents
Certified contractors will have clearly demonstrated that their trained staff consistently adhere to industry best practice and fully appreciate the importance of correct installation, inspection and maintenance, ultimately providing peace of mind for the consultant and building operator. A comprehensive maintenance programme is every bit as important as appropriate design and installation but can often be overlooked or simply forgotten about. BS EN 12101 and BS 9999 document maintenance requirements for both natural and powered smoke control systems, advising that life critical equipment should be included in a building services maintenance schedule. These standards also stipulate the frequency of tests and offer advice on what should be checked on a weekly, monthly or yearly basis. If a smoke control system fails, the consequences can be truly catastrophic. Therefore, the building operator has a duty of care to ensure that when they are looking to put a maintenance plan in place, they check that maintenance contractors are suitably qualified and fully understand the system they are working with. Taking risks or cutting corners with safety critical systems is, at best, irresponsible and negligent. Everyone involved in the design, construction and operation of high-rise buildings will soon face more stringent measures designed to improve fire safety standards and when it comes to smoke controls, competency is key. ■
THE VOICE OF THE SMOKE CONTROL INDUSTRY As experts in smoke control, SCA members lead the way in promoting and enhancing the design, manufacture, installation and maintenance of life safety smoke ventilation systems and ensuring only independently tested and certified products are installed in buildings. All SCA members are third party accredited, understand the varying smoke control requirements for all types of buildings and will provide solutions that are designed to meet the relevant UK regulations and standards.
Further information, design guides and new members application forms are available via: www.feta.co.uk/smokecontrol SCA members would be pleased to help with any product, technical or general smoke control queries, in the first instance please email smokecontrol@feta.co.uk
Performance modelling Detailed plant and controls modelling coupled with dynamic building analysis is the only way to realistically evaluate expected and as built building performance.
Building Energy Modelling Software
Through the process of compliance, space and plant sizing, detailed annual performance simulation, and monitored performance an accurate calibrated model is developed. In our experience achieving meaningful performance improvements is in the detail of plant and control operation.
Tas Consultancy Services We have engineers and building physicists who have years of experience in building performance modelling, offering you the chance to save time, money, and provide your clients with a high quality service.
Call for a quote today Tel: + 44 (0) 1908 261461 Email: Consultancy@edsl.net www.edsl.net
Environmental Design Solutions Ltd 13-14 Cofferidge Close, Stony Stratford Milton Keynes, MK11 1BY
CIBSE CERTIFIED ASSESSORS AND CONSULTANTS
CIBSE Certified Assessors and Consultants CIBSE Certification certifies personnel that can provide a robust, impartial source of knowledge and guidance in the design and operation of energy-efficient buildings. They are widely recognised for their extensive experience in the sustainable building industry, and include: • • • • • •
Low Carbon Consultants (LCCs) Low Carbon Energy Assessors (LCEAs) Air Conditioning Inspectors (ACIs) ESOS Lead Assessors Heat Networks Consultants Section 63 Advisors
Search for CIBSE Certification assessors and consultants near you, and then please visit www.cibsecertification.co.uk/Online-Register for their contact details and to search the full register to see all the assessors and consultants available to you.
Search for an assessor WWW.CIBSE.ORG
CIBSE GUIDE TO BUILDING PERFORMANCE 2019 |
69
For full contact details of any of the assessors and consultants listed here, and to search the full online register of certified energy experts, visit:
CIBSE CERTIFIED ASSESSORS AND CONSULTANTS
www.cibsecertification.co.uk/Online-Register
East Midlands Bray, Steven
Burton Hospital NHS Trust Estates Dept Burton-on-Trent Certified Qualifications:
• LCC Building Operation • LCEA DEC
Carr, Michael
Michael Carr Consultancy Ltd Grimsby Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design • LCC Building Operation • LCC Simulation • LCEA DEC • LCEA EPC Level 3 and 4 EW&NI
Doylend, Nicholas DSSR Loughborough
Certified Qualifications:
• LCC Building Design • LCC Simulation
Evans, Chris Michael Rolton Group Wellingborough
Certified Qualifications:
• LCC Building Design
Hartnett, John EDSL Northampton
Jones, Dwain
D&d Building Services Consulting Engineers Ltd Derby Certified Qualifications:
Ingleton Wood Cambridge
Kirbyshire, Mark
• LCC Building Design • LCC Simulation
Envision Energy LTD Wellingborough
Certified Qualifications:
• LCC Building Design
Purcell, Jonathan Lee
Catchpole, Adrian
Carbon Smart helps organisations, government, councils and SMEs to improve its environmental and social impact.
Qu, Shidan
• LCC Building Design • LCC Building Operation • LCC Simulation • LCEA DEC • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Certified Qualifications:
Derry Building Services Ltd Nottingham Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 3 and 4 Scotland • LCEA EPC Level 5 EW&NI • LCEA EPC Level 5 Scotland
Sellars, William
Avus Consulting LTD Corby Certified Qualifications:
Stannard, Harrison
E P Consulting Nottingham
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
Holmes, Richard Third Stone Ltd Nottingham
Couch Perry Wilkes Leicester
Certified Qualifications:
• LCC Simulation
Tysoe, Ben Paul
Building Services Design Kettering Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Ventress, Lindsay EcoAct Corby
ESOS Specialism:
ESOS Specialism:
• Office buildings • Schools • Process
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Operation
• Buildings • Transport • ISO 50001
• ESOS Lead Assessor • LCC Building Design • LCC Building Operation • LCC Energy Management Systems (EnMS) • LCC Simulation • LCEA DEC • LCEA EPC Level 3 and 4 EW&NI
Hopper, Paul
Gladwood Design Ltd Market Rasen Certified Qualifications:
• LCC Simulation
Certified Qualifications:
Walker, Derek Graham EDP Consulting Ltd Wigston
Certified Qualifications:
• LCC Building Design
Zhou, Fangyuan Pick Everard Nottingham
Certified Qualifications:
• LCC Building Design
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
Johns Slater And Haward Ipswich Certified Qualifications:
Diamond, Robert Ingleton Wood LLP Colchester ESOS Specialism:
• Buildings • ISO 14001 • Retail; Education and Healthcare
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design • LCC Building Operation • LCC Simulation • LCEA DEC • LCEA EPC Level 3 and 4 EW&NI
Brightest Fuels Leigh-on-Sea
ESOS Specialism:
• Engineering Factories • School buildings • Warehousing
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Operation
Irving, Adele
Vinci Construction UK Ltd Halstead Certified Qualifications:
• LCC Building Design
Welsh, Jason
Elmstead Energy Assessors & Building Services Frinton-on-sea Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA Air Conditioning Inspector Level 3 and 4 • LCEA EPC Level 5 EW&NI
Williams, Nathan James
The Engineering Workshop LLP Chelmsford Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Wright, Stephen Peter Ember Properties Limited Billericay Certified Qualifications:
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
We have worked with over 100 businesses during ESOS Phase 1 from professional services firms to global airlines to identify energy efficiency opportunities that align with the business’s priorities. From Lead Assessor sign off to carrying out the full ESOS engagement, we tailor our support to our clients. Several of our clients have been audited by the Environment Agency, with zero remedial actions noted. We support companies beyond compliance and help identify and realise long term energy savings and carbon neutral opportunities.
Gibson, Robin Brian
• LCEA Air Conditioning Inspector Level 3 and 4
70
105-107 Farringdon Road, London EC1R 3BU
Hive Consultants Duxford
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Hernandez, Jose
Hobbs, Mark
Burbridge, Andrew Steven
Tel: +44 (0) 207 048 0450 Email: info@carbonsmart.co.uk Website: www.carbonsmart.co.uk
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Certified Qualifications:
Certified Qualifications:
Waterman Group Nottingham
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Certified Qualifications:
Greater London
Brown, Antony
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
Certified Qualifications:
Pick Everard Leicester
Eastern Counties
Chorafa, Marguerita AECOM London
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
Compton, Clephane Sustainable Consulting London ESOS Specialism:
• Hospitality • Restaurants • Retail
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Operation
Cotton, Matthew Charles Twin and Earth Limited London Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Courtenay, Peter Bouygues UK London
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
For full contact details of any of the assessors and consultants listed here, and to search the full online register of certified energy experts, visit:
Increase comfort. Reduce risk.
CONCERNED ABOUT OVERHEATING RISKS?
Field, John
Kordel, Tom
ESOS Specialism:
ESOS Specialism:
Native-Hue Ltd London
Certified Qualifications:
Franklin, Audley RAAM Modelling London
Certified Qualifications:
• Heat Networks Consultant • LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
Gajdos, Ondrej OG Energy Ltd London
Greenlite Energy Assessors specialise in the diagnosis, avoidance and resolution of overheating risks in low energy buildings, with a proven track record for providing accurate predictions of thermal behavior. An overheating risk analysis can: Improve occupancy comfort, wellbeing & productivity
Certified Qualifications:
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Kumari, Kavita Cundall London
Certified Qualifications:
• LCC Building Design
Li Destri Nicosia, Elisabetta HTA Design LLP London
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Guzman, Andres
Mazzoni, Mauro
Certified Qualifications:
ESOS Specialism:
Colliers International London • LCC Building Operation
Inform design decision making
Halai, Roshan Nitin
For information and impartial design advice,
• Building Performance Evaluation of Buildings • Energy audits of buildings and organisations • Mechanical Building Services design engineer
• LCC Building Design • LCC Design Management Scotland • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 3 and 4 Scotland
Reduce energy demand Evaluate long term risks
XCO2 Energy London
• ISO 50001 Energy Management Systems • Measurement and Verification (M&V) using IPMVP
• ESOS Lead Assessor • LCC Building Design
calfordseaden London
CIBSE CERTIFIED ASSESSORS AND CONSULTANTS
www.cibsecertification.co.uk/Online-Register
Certified Qualifications:
Crofton Design City Ltd London • Residential, commercial and educational buildings • Energy Use
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design
Certified Qualifications:
• Heat Networks Consultant
visit www.GreenliteEA.co.uk
Hamblin, Adam Richard John RED Managed Services London Certified Qualifications:
• Heat Networks Consultant
LCEA 159756
Hocknell, Chris Creswell-Wells, Tavis Cundall London
Certified Qualifications:
• LCC Building Design
Dennis, Stevie Malcolm Hollis London
Certified Qualifications:
Cullen, Karl Alexis Patrick
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Certified Qualifications:
Doshi, Nikhil
Chapmanbdsp London
• LCC Building Design • LCC Energy Management Systems (EnMS) • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Dabidian, Nazli Mecserve Ltd London
Certified Qualifications:
• LCC Building Design • LCC Building Operation • LCC Simulation • LCEA DEC • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Dalapas, Panagiotis Konstantinos Mecserve Ltd London
Certified Qualifications:
Hodkinson Consultancy London Certified Qualifications:
Eight Associates London
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Kamath, Supriya Mecserve Ltd London
Certified Qualifications:
• LCC Building Design
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Kiani, Mohamad R
Edwards, Matthew
• Energy modelling using IESVE • LCC & process analysis • Energy performance policy
QODA Consulting Ltd London
Certified Qualifications:
• LCC Building Design
Elias, Jennifer Cundall London
Certified Qualifications:
• LCC Building Design
Waterman Group London ESOS Specialism:
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Smart GreenTech Solutions Ltd, Suite 36, 88-90 Hatton Garden, Holborn, London EC1N 8PG Tel: +44 (0)3300 881451 Email: pierre@smartgreentech-solutions.com Website: www.smartgreentech-solutions.com Smart GreenTech Solutions are an independent and multi-award-winning London based energy consultancy. We are passionate about improving the energy efficiency and indoor air quality of buildings and provide all aspects of energy management, energy efficiency, sustainability and indoor air quality monitoring, analysis, optimisation and certification. Key services include: l Smart metering for assessment
of in-use performance
l Energy Efficiency audits
and project development
l ESOS Phase 2 audits and compliance l Level 3 and 4 TM44 Air Conditioning inspections l Indoor air quality audits
and improvement plans.
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
WWW.CIBSE.ORG
CIBSE GUIDE TO BUILDING PERFORMANCE 2019 |
71
For full contact details of any of the assessors and consultants listed here, and to search the full online register of certified energy experts, visit:
CIBSE CERTIFIED ASSESSORS AND CONSULTANTS
www.cibsecertification.co.uk/Online-Register
McCrossin, Thomas
Savvopoulos, Ioannis
Thiara, Warinder Singh
Certified Qualifications:
ESOS Specialism:
ESOS Specialism:
Cavendish Engineers London
Greengage Environmental Ltd London
• LCEA Air Conditioning Inspector Level 3 and 4
• Buildings • Energy Use • Industrial Processes
Messina, Antonio Ramboll London
• Energy Audits in UK and Europe • Transport • Display Energy Certificates (DEC)
Certified Qualifications:
Tel: +44 (0) 20 8755 3775 Tel: 07787 799 282
Email: info@westlondonenergyassessors.co.uk Website: www.westlondonenergyassessors.co.uk
Sentobe, Paul
• ESOS Lead Assessor • LCC Building Design • LCC Building Operation • LCC Energy Management Systems (EnMS) • LCC Simulation • LCEA DEC • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Business Footprint Ltd Beckenham
We are a London based, energy management consultancy with focus and expertise in energy specific regulatory compliance: Energy Performance Certificates; Display Energy Certificates; Air-conditioning Inspections; Energy Savings Opportunity Scheme Compliance; BS EN 8580-1:2019; BS EN 16247; ISO 50001:2018; BREEAM In-Use certification; Energy Management Systems; Energy Systems Audits; Building Operational Management; and Heat Networks.
ESOS Specialism:
• Buildings • Distribution • Refrigeration
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Papathanasopoulos, Stefanos Cundall London
Certified Qualifications:
• LCC Building Design
Tang, Yunshan
Peirce, Christopher
Energylab London
CBRE London
Established in 2007, we provide certification services, energy management guidance and advice to the public and private sectors in the UK and Europe, most of our business being through recommendations.
Certified Qualifications:
• LCC Building Design • LCC Building Operation • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Architectural lighting
s tem sys
• Office • Retail • Leisure
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design
Walker, David
M E Design Consultancy Ltd London ESOS Specialism:
• EPC Level 3 & 4 • BREEAM UK New Construction Assessor • Specifying Energy Efficient Equipment
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI
Walker, Richard CAPITA PLC London
ESOS Specialism:
• Office Buildings • Buisness travel • Call Centres
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Operation
Stra teg ic a sse tm an ag e
O peration
S u s tain abi lity ical project management Techn
tbanda.com | @TroupBywaters
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
H
g ein ellb dw an lth ea
Management
C o ns truction
ng ildi perf u b or ming
s
er
vice s de sign
H
igh
Our whole-life approach
Engineeri ng se r
ment manage ities facil c i g ate Str
ance rform g pe ldin Bui
ing rform partne rsh -pe h Design ig
ip
H
t en m
I
nt ige ell nt
Constru ction exp erts
West London Energy Assessors, PO Box 397, Twickenham, London TW1 9EY
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
ESOS Specialism:
72
ECO HVAC Engineering Ltd Hayes
Building performance We can assess the performance of your building either at design stage or in operational use. Using the latest industry standard technology, coupled with our bespoke analytics and proven track record, we can optimise how your building performs in use to deliver benefits including costs, energy and comfort. Our services include: + Optimisation through building physics analysis + Thermal modelling and Computational Fluid Dynamics (CFD) + Façade / envelope analysis and optimisation + Thermal comfort (CIBSE TM52 & TM59) + Energy audits and ESOS
+ Operational energy predictions (CIBSE TM 54) + Soft landings management + Verification engineer & seasonal commissioning + Design vs operational performance reviews + Building performance reviews + Post occupancy evaluation
To find out more please contact: Jon Moraza | 020 7504 1495 | J.Moraza@tbanda.com
For full contact details of any of the assessors and consultants listed here, and to search the full online register of certified energy experts, visit:
CIBSE CERTIFIED ASSESSORS AND CONSULTANTS
www.cibsecertification.co.uk/Online-Register
Wilson, Gabriela
Ketchley, Keith
Troup Bywaters + Anders London
DESCO Sunderland
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
North East
Kingstone, David
Ackerley, Shaun
Parsec Consulting Engineers Ltd Darlington Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Forster, Keith Scott Screen & Forster Ltd Newcastle upon Tyne
Certified Qualifications:
Certified Qualifications:
• LCC Building Design • LCC Design Management Scotland • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 3 and 4 Scotland • LCEA EPC Level 5 EW&NI • LCEA EPC Level 5 Scotland
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI
BuroHappold Engineering Leeds
Norval, Philip
The Energy Checking Company Ltd Tyne and Wear Certified Qualifications:
• LCC Building Operation
Stephenson, Max
Avoca Consulting Engineers Ltd Meadowfield Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Zerum Liverpool
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA Air Conditioning Inspector Level 3 and 4 • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Holt, Matthew Zerum Manchester
Certified Qualifications:
ESOS Specialism:
Tatters, Graham
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI
Certified Qualifications:
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Livingstone, Sean
Walton, David
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI
• Offices and retail • Healthcare and scientific • Primary/secondary & higher education
• ESOS Lead Assessor • LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Lundy, Stephen
Axion Energy Solutions Ltd Darlington ESOS Specialism:
• Commercial & Industrial Buildings • Retail and Leisure • Energy Reduction Project Identification and Management
Certified Qualifications:
• ESOS Lead Assessor • LCC Energy Management Systems (EnMS)
Sine Consulting Coxhoe
BUUK Infrastructure Darlington
• LCC Building Design
WSP Sedgefield
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
ESOS Specialism:
• Offices • Retail • Mixed Estate
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Operation • LCEA DEC
Corkhill, Bernard
Bernie Corkhill Associates Ltd Widnes Certified Qualifications:
• LCC Building Design • LCC Building Operation • LCEA Air Conditioning Inspector Level 3 and 4 • LCEA DEC
Dreossi, Victor Mario BDP Manchester
Certified Qualifications:
Tel: 0191 691 1308 Mobile: 07921 137 500
www.neecoltd.co.uk
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
Lomas, Fiona
Warwick, David
Stem Energy Solutions Stockport
Portland House Belmont Business Park Durham DH1 1TW
Certified Qualifications:
Turley Manchester
Brown, Gary
NEECO LTD
JRB Environmental Design Ltd. Chorley
• Heat Networks Consultant
Certified Qualifications:
North West
74
Forrest, Andrew Michael
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Duggan, Neville
Seven Consulting Ltd Manchester Certified Qualifications:
• LCC Building Design
Certified Qualifications:
McIlroy, Gemma
Centrica Business Solutions Manchester Certified Qualifications:
• Heat Networks Consultant
Moran, Lee Gerard James Vital Energi Preston
Certified Qualifications:
• Heat Networks Consultant • LCC Building Design • LCC Simulation
Pickford, Matthew
S I Sealy & Associates Ltd Stockport Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Roberts, Steven
Regional Buildings Assessments LLP Blackburn Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI
Shaw, Gary Dean
Pettit Singleton Associates Preston Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI
Smith, Alan
National Design Consultancy Stalybridge Certified Qualifications:
• LCC Building Operation • LCEA DEC
For full contact details of any of the assessors and consultants listed here, and to search the full online register of certified energy experts, visit:
Smith, Geoffrey Ian ENGIE Manchester
ESOS Specialism:
• Building energy surveys to CIBSE TM22 and BS EN 16247-2 • Air conditioning surveys to CIBSE TM44 Level 3 & 4 • Energy Performance Certificates Level 3 & 4
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design • LCC Simulation • LCEA Air Conditioning Inspector Level 3 and 4 • LCEA EPC Level 3 and 4 EW&NI
Turner, Anthony John Energy Council Bury
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
Turner, Stephen Pettit Singleton Ltd Carlisle
Certified Qualifications:
• LCC Building Design • LCC Building Operation • LCC Simulation • LCEA DEC • LCEA EPC Level 3 and 4 EW&NI
Walker, Paul
Engineering Design Partnership Prestwich Certified Qualifications:
• LCC Building Design • LCC Design Management Scotland • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 3 and 4 Scotland • LCEA EPC Level 5 EW&NI • LCEA EPC Level 5 Scotland
Watt, Daniel
Watt Energy & Consulting Engineers Limited Manchester Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Welsh, Paul Alan
Paul Welsh Consulting Ltd Chester Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
Wheeler, William Martin Douglas Energy & Carbon Reduction Solutions Ltd Ashton-under-Lyne ESOS Specialism:
• Pharmaceutical manufacturing facilities • Pharmaceutical research and development (R&D) laboratories • University laboratory facilities (teaching and research)
Certified Qualifications:
• ESOS Lead Assessor • LCC Energy Management Systems (EnMS)
Ya-Alimadad, Maryam Sudlows Ltd Oldham
Certified Qualifications:
• Heat Networks Consultant
WWW.CIBSE.ORG
Overseas
Koscielniak, Michal
Troup Bywaters + Anders Glasgow Certified Qualifications:
Beckett, Janet
• LCC Design Management Scotland • LCC Simulation • LCEA EPC Level 3 and 4 Scotland • LCEA EPC Level 5 Scotland • Section 63 Advisor
Carbon Saver Consultancy Ltd Spain Certified Qualifications:
• LCC Building Design • LCC Design Management Scotland • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 3 and 4 Scotland • LCEA EPC Level 5 EW&NI • LCEA EPC Level 5 Scotland
Butler, Trevor John Archineers Limited Canada
Certified Qualifications:
• LCC Building Design
Scotland and Northern Ireland Blyth, Craig DSSR Glasgow
Certified Qualifications:
• LCC Building Design
Buick, Colin
H&J Martin Asset Management Services Newtownabbey ESOS Specialism:
• Building Services and Operation • Facility Management • Manufacturing
MacKichan, Sophie Kate DSSR Glasgow
Harley Haddow, 124-125 Princes Street, Edinburgh EH2 4AD
Certified Qualifications:
• LCC Building Design
Tel: +44 (0)131 226 3331 Email: enquiries@harleyhaddow.com Website: www.harleyhaddow.com
Magee, Brian
Harley Haddow are Mechanical, Electrical, Sustainability, Civil and Structural Consulting Engineers. We were formed in 1950 and over the last seven decades have built a reputation for high quality and extensive project experience to be one of the UK’s foremost consulting engineering practices.
• LCC Building Design
Department of Justice (NI) Lisburn Certified Qualifications:
McKinney, Carina DSSR Glasgow
Certified Qualifications:
• LCC Building Design • LCC Design Management Scotland • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 3 and 4 Scotland • LCEA EPC Level 5 EW&NI • LCEA EPC Level 5 Scotland • Section 63 Advisor
We have offices in London, Edinburgh and Glasgow and have over 100 employees including chartered engineers, graduate engineers and technicians. We are fully qualified Level 5 Low Carbon Energy Assessors and can provide full building regulations compliance modelling and EPC’s across the UK and well as Section 63 and ESOS assessments.
McNeill, David John
Engright Engineering Consultants Ltd Glasgow Certified Qualifications:
• Heat Networks Consultant
Miller, Paul Graham
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Operation • LCEA Air Conditioning Inspector Level 3 and 4 • LCEA DEC
Dubouchet, Patrick
Burke, Thomas Paul
• Energy Management for Commercial & Industrial Clients • Controls of HVAC Systems • Monitoring & Targeting
Burke Morrison Consulting Engineers Derry Certified Qualifications:
KJ Tait Engineers Edinburgh
Concept Energy Solutions Ltd West Kilbride
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
ESOS Specialism:
Mitchell, Graham
Certified Qualifications:
Graham Mitchell Trading As G.M. A/C Inspections Edinburgh
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI
• ESOS Lead Assessor • LCC Building Operation • LCEA DEC
Campbell, Andrew
• LCEA Air Conditioning Inspector Level 3 and 4
Gomez, Arrate
Peterson, Sarah
Henderson Warnock Glasgow
Certified Qualifications:
Clark, Alan
arbnco Ltd Ferniegair, Hamilton
• Heat Networks Consultant
Drysdale, Charlie Pinnacle Power Edinburgh
Certified Qualifications:
• Heat Networks Consultant
Harley Haddow Edinburgh
Certified Qualifications:
• Heat Networks Consultant
Certified Qualifications:
Certified Qualifications:
Mabbett & Associates Ltd Glasgow
• LCC Building Design • LCC Design Management Scotland • LCC Simulation
Easy Heat Systems Ltd Perth
CIBSE CERTIFIED ASSESSORS AND CONSULTANTS
www.cibsecertification.co.uk/Online-Register
ESOS Specialism:
Hermanowicz, Agnieszka Justyna
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design • LCC Design Management Scotland • LCC Simulation • LCEA EPC Level 5 EW&NI • LCEA EPC Level 5 Scotland • Section 63 Advisor
Certified Qualifications:
• LCC Building Design
Jones, Michael Sweco Edinburgh
Certified Qualifications:
• Heat Networks Consultant
King, Stewart
Ross, David
Stewart King Environmental Engineers Ltd Cornhill Certified Qualifications:
• LCC Building Design • LCC Building Operation • LCC Energy Management Systems (EnMS)
• Commercial Buildings • Energy Performance • Dynamic Simulation Modelling
Carbon Futures Glasgow Certified Qualifications:
• LCC Building Design • LCC Design Management Scotland • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 3 and 4 Scotland • LCEA EPC Level 5 EW&NI • LCEA EPC Level 5 Scotland • Section 63 Advisor
CIBSE GUIDE TO BUILDING PERFORMANCE 2019 |
75
For full contact details of any of the assessors and consultants listed here, and to search the full online register of certified energy experts, visit:
CIBSE CERTIFIED ASSESSORS AND CONSULTANTS
www.cibsecertification.co.uk/Online-Register
Scott, Martyn
Department of Finance (NI) Belfast Certified Qualifications:
• LCC Building Operation
Sharma, Amit Rybka Limited Glasgow
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
Smith, Stephen Natural Power Dunblane
Certified Qualifications:
• Heat Networks Consultant
Strachan, Stephen Changeworks Edinburgh
DSSR Glasgow
Certified Qualifications:
Van Duivenbode, Ian Francis Anthony Ramboll Glasgow
Certified Qualifications:
• LCC Building Design
Vissariou, Pafsanias-Athanasios WSP Edinburgh
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 3 and 4 Scotland • LCEA EPC Level 5 EW&NI • LCEA EPC Level 5 Scotland • Section 63 Advisor
Williamson, Fiona Patricia DSSR Glasgow
Certified Qualifications:
• Heat Networks Consultant • LCC Design Management Scotland • LCC Simulation • LCEA EPC Level 3 and 4 Scotland • LCEA EPC Level 5 Scotland • Section 63 Advisor
Wilson, Kevin Richard Glasgow City Council Glasgow
Certified Qualifications:
• LCC Building Design • LCC Design Management Scotland • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 3 and 4 Scotland • LCEA EPC Level 5 EW&NI • LCEA EPC Level 5 Scotland • Section 63 Advisor
Degrees C Environmental Ltd Hook Certified Qualifications:
South East
Brand, Michael
• LCEA Air Conditioning Inspector Level 3 and 4
Al-Jeboori, Najah
Surrey County Council Kingston upon Thames Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
ESOS Specialism:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Certified Qualifications:
Cranstone, Collyn
• LCEA Air Conditioning Inspector Level 3 and 4
Swain, Patrick
Certified Qualifications:
RINA Consulting Brighton
• Heat Networks Consultant • LCC Building Design • LCC Building Operation • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI
Alsbury, Simon
Building Performance Prediction Ltd Belfast
Beech, Michael
• LCC Design Management Scotland • LCC Simulation • LCEA EPC Level 3 and 4 Scotland • LCEA EPC Level 5 Scotland
Certified Qualifications:
• Heat Networks Consultant
76
Wood, Lindsay Ann
Energise Ltd St Neots
• Complex organisational structures including Private Equity • Energy use in building with variant occupancy (e.g. Hospitality/Leisure) • Monitoring Targeting and Metering
Energy Vision Ltd Harpenden ESOS Specialism:
• Energy Management System & energy procurement • Estate-wide buildings; energy and HVAC monitoring and management • Internet based remote BEMS; aM&T; metering and sub-metering
Certified Qualifications:
• ESOS Lead Assessor • LCC Energy Management Systems (EnMS)
Certified Qualifications:
• LCC Building Design
Christie, Trevor Baileygomm Ltd Ware
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI
Bajaj, Neil
Cleeton, Lee Alexander
Certified Qualifications:
ESOS Specialism:
Bako-Biro, Zsolt
• ESOS Lead Assessor • LCC Building Design
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Barber, Alan
Salvis Group Ltd Fareham Certified Qualifications:
• LCC Building Design
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
Certified Qualifications:
The Consultus International Group Ltd Rochford • Building Fabric • Energy from Waste
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Operation
Certified Qualifications:
• LCC Building Design • LCC Design Management Scotland • LCC Simulation • LCEA EPC Level 5 EW&NI • LCEA EPC Level 5 Scotland
GT Advanced Ltd Reading
NPS Group West Sussex
Cheng, Jonathan
Bacon, Paul Samuel
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Dunstall, Paul
ESOS Specialism:
MBA Consulting Engineers Ltd Bedford
CCA Environmental Limited Croydon
Certified Qualifications:
• LCC Building Design
Cader, Dariusz
• LCC Building Design
Certified Qualifications:
Hoare Lea LLP Maidenhead
Edge, Steve
• LCC Building Design
Apostolou, Aikaterini
Environmental Design Solutions Ltd Milton Keynes
Davies, Richard
Certified Qualifications:
BAM Construct UK Ltd St. Albans
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Certified Qualifications:
Certified Qualifications:
Burton, David
Certified Qualifications:
Cooper Homewood Engineering Consultancy Fareham
Hitecsa UK Ltd Caterham
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Mace Group Hertford
• ESOS Lead Assessor • LCC Building Operation • LCEA DEC
Daly, Patrick Michael
Certified Qualifications:
GVA Biggleswade
• Commercial Real Estate • Energy Audits & Energy Management • Low & Zero Carbon Technologies
Certified Qualifications:
Coles, Andrew
AC Consulting Engineers Ltd Chelwood Gate Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
Cranefield, Jonathan Lee Digital Energy Ltd. Epsom
Certified Qualifications:
• LCC Building Design • LCC Building Operation • LCC Simulation • LCEA DEC • LCEA EPC Level 3 and 4 EW&NI
LED Low Energy Design Ltd, 1 Blatchington Road, Hove, East Sussex, BN3 3YP Tel: +44 (0)1273 561 585 Email: info@led-ltd.co.uk Our company offers a wide range of services including mechanical and electrical engineering design consultancy for the built environment. We specialise in the production of Level 3-5 EPCs, ESOS, DEC and TM44 certification works, all accredited through CIBSE. Our lead consultant is a Chartered Engineer with over 30 years of building services experience. This ensures that the majority of our work is through repeat business and recommendations. We are continuing to expand our business throughout the UK, in a planned manner and with the delivery of successful projects and customer satisfaction as the forefront of our philosophy.
Cost-effective measures can cut energy costs by 20%. On a typical spend of £1.8m, this translates to an average annual saving of £360,0000.
Are you Ready for ESOS Phase 2? If you have more than 250 employees and an annual turnover greater than £45m, then ESOS applies to you. Let our experienced and accredited ESOS Lead Assessors take the stress out of compliance. We will:
REVIEW
Review your energy data for the last 12 months
ASSESS
Carry out rigorous ESOS assessments on operations
RECORD
Analyse and record energy use across operations
REPORT
Collate and report findings to the Environment Agency prior to 5th December 2019
IMPLEMENT
Implement energy efficiency projects that will save your business money
Our dedicated team of energy and sustainability consultants can also help with a range of business performance needs including Low Carbon Consultancy (LCC), Heat Network Assessments (HNC) and Energy Performance Certificates (EPC) or Display Energy Certificates (DEC).
For a free consultation call 0845 303 2721 or email ESTeam@aaprojects.co.uk
www.aaprojects.co.uk
For full contact details of any of the assessors and consultants listed here, and to search the full online register of certified energy experts, visit:
CIBSE CERTIFIED ASSESSORS AND CONSULTANTS
www.cibsecertification.co.uk/Online-Register
Edmondson, Martin
Keane, Martin
Certified Qualifications:
ESOS Specialism:
Next Control Systems Ltd Fleet
Baseline Energy Management Ltd Brighton
• LCC Building Operation • LCEA DEC
• Energy Efficiency in Buildings • Compliance Management • Organisational Sustainability
Edwards, Peter
Certified Qualifications:
Brinson Staniland Partnership Chathan
RPS Group PLC, 20 Western Avenue, Milton Park, Abingdon, Oxfordshire OX14 4SH
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Elphick, Stephen James Steve Elphick Associates Twickenham ESOS Specialism:
• Offices and Commercial Premises • Building Services Sustainability and Energy Savings Consultant • Low Carbon Energy Assessor (EPC DEC and ACI)
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design • LCC Building Operation • LCC Simulation • LCEA Air Conditioning Inspector Level 3 and 4 • LCEA DEC • LCEA EPC Level 3 and 4 EW&NI
Finnigan, Jessica
Ridge and Partners LLP Farnborough Certified Qualifications:
• LCC Building Design
Tel: +44 (0)20 7280 3240 Fax: 020 7283 9248 Email: thomas.vazakas@rpsgroup.com Website: www.rpsgroup.com Founded in 1970, RPS is a leading global professional services firm of 5,600 consultants and service providers. We stand out for our clients by using deep expertise to solve problems that matter, making them easy to understand and by being easy to work with. Providing a full range of energy services for property developments across the UK, our Low Carbon Consultants design and advise to give clients confidence that their development will meet the energy requirements of Building Regulations, Planning Conditions and Sustainability Assessments.
Fletcher, John
Certified Qualifications:
Fuller, Oliver
QODA Consulting (Oxford) Ltd Farringdon Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Grant, Justine
TEAM (Energy Auditing Agency Ltd.) Linford Wood ESOS Specialism:
• Offices • Campus sites • Retail
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Operation • LCEA DEC
Grenville, Colin
Erebus Environment Limited Tadley Certified Qualifications:
• LCC Building Operation
Hall, Erica Jamea Acclaro Advisory Wokingham
Salvis Group Ltd Portsmouth
Certified Qualifications:
• Heat Networks Consultant • LCC Building Design
Kimber, Richard Martin KCS Consulting Southampton
ESOS Specialism:
• BS EN16247 Energy Audits • Low Carbon Energy Assessment and Dynamic Simulation modelling • LCC Building Design and Project Management
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Kopacz, Katarzyna Mace Group Southampton
Certified Qualifications:
Hanson, Oliver
Legg, Bridget Rachel
Certified Qualifications:
ESOS Specialism:
Red Engineering Design Ltd Bicester • LCC Building Design • LCC Design Management Scotland • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 3 and 4 Scotland • LCEA EPC Level 5 EW&NI • LCEA EPC Level 5 Scotland
Hinxman, Rowland
Hinx Built Environment Limited Hayling Island Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Hobbs, Angela 4see Ltd Stubbington
ESOS Specialism:
• Built Environment • Retail • ISO 50001
Certified Qualifications:
• ESOS Lead Assessor • LCC Energy Management Systems (EnMS)
ESOS Specialism:
• Buildings • Transport • Implementation of ISO 50001
Certified Qualifications:
• ESOS Lead Assessor • LCC Energy Management Systems (EnMS)
78
Keating, Michael
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI
Healthy Buildings International Limited Spencers Wood • LCEA Air Conditioning Inspector Level 3 and 4
• ESOS Lead Assessor • LCC Building Operation • LCEA Air Conditioning Inspector Level 3 and 4 • LCEA DEC
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
Maddock, Samuel
Sustainable Urban Solutions Limited Bracknell Certified Qualifications:
• LCC Building Design • LCC Design Management Scotland • LCC Simulation • LCEA EPC Level 5 EW&NI • LCEA EPC Level 5 Scotland
May, Nick
Flow Analysis Ltd Bedford Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
Merriman, John
John Merriman Associates Fleet Certified Qualifications:
• LCEA Air Conditioning Inspector Level 3 and 4
Mistry, Rupangkumar Silcock Dawson & Partners Hatfield Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA Air Conditioning Inspector Level 3 and 4 • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Olivier, Pierre Jan
Smart GreenTech Solutions Limited Amersham Certified Qualifications:
• LCC Building Operation • LCC Energy Management Systems (EnMS) • LCEA Air Conditioning Inspector Level 3 and 4 • LCEA DEC
Inspired Energy Bromley
• Commercial Buildings • Retail Buildings
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design
Lillicrap, Colin
Colin Lillicrap Associates Ltd Berkhamsted ESOS Specialism:
• Energy management systems to ISO 50001 - ESOS scoping consultations and strategies for buildings • process and transport • data analysis - reporting and recommendations
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Mack, Colin Michael Mace Group Southampton
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
SUS Consultants Nationwide coverage Based in Berkshire Tel: +44 (0)2034 880 865 Email: info@susconsultants.co.uk Website: www.susconsultants.co.uk SUS Consultants provide building compliance and energy management for new and existing commercial properties. Our services ensure your premises complies with current building legislation whether you are protecting future assets, designing a new-build, or want to reduce existing energy consumption. We are an experienced consultancy who have engaged in commercial projects working across many different sectors such as; retail, financial, offices, storage and distribution, and hospitality.
PASCHALi - WINNER NATIONAL ENERGY EFFICIENCY AWARDS 2018 - presented by Sir Lenny Henry CBE at the NEC Birmingham
Photo by Jason Mitchell Photography
ThE mulTi-award-winning EnErgy and EnvironmEnTal ConsulTanCy ConsulTanCy: ESOS CRC SECR CDP Energy Auditing ISO 50001 ISO 14001 and ISO 9001 implementation & training M&T Due Diligence (CMVP) Carbon footprinting EnErgy PurChasing: Use our fair and transparent brokering services to save time, money and effort!
we use PasChali as our trusted energy specialists… they always add value to our business…we would highly recommend them to others 4100 Park Approach Thorpe Park Leeds LS15 8GB Email: info@paschali.co.uk Call: 0113 400 1101
www.paschali.co.uk
For full contact details of any of the assessors and consultants listed here, and to search the full online register of certified energy experts, visit:
CIBSE CERTIFIED ASSESSORS AND CONSULTANTS
www.cibsecertification.co.uk/Online-Register
Opone, Michael
Sussex Community NHS Trust Brighton Certified Qualifications:
• LCC Building Operation • LCEA DEC
Parker, Paul Sustainia Ltd West Molesey
ESOS Specialism:
• Buildings • Transport
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design • LCC Design Management Scotland • LCC Energy Management Systems (EnMS) • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 3 and 4 Scotland • LCEA EPC Level 5 EW&NI
Pope, Tom
Energy Report Ltd Fareham Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI
Sharma, Satish Kumar Kent Energy Savings Ltd Kent Certified Qualifications:
• LCC Building Operation • LCEA Air Conditioning Inspector Level 3 and 4 • LCEA DEC
Shaw, Ian CBRE Maidstone
ESOS Specialism:
• Offices • Manufacturing • Data Centres
Thompson, Andrew
Johnathan Hart Associates Ltd Cranleigh Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Tomlinson, Jason
Energy First Consultancy Ltd South Croydon Certified Qualifications:
• LCEA Air Conditioning Inspector Level 3 and 4
Uzair, Muhammad Umer Syntegra Group Reading ESOS Specialism:
• Building Services • Energy Efficient Use/Low Carbon Buildings • Energy Auditing in term of ISO 50001
Certified Qualifications:
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI
Walton, Mark
Fenton Energy Consultants Crawley Down ESOS Specialism:
• Level 5 EPC Dynamic Simulation/BRUKL • Level 4 EPC/BRUKL • DEC
ESOS Specialism:
ESOS Specialism:
Energise Ltd St Neots
Certified Qualifications:
• Hospitality & Leisure • Offices • Complex Data Analysis
Smith, Vincent John
• ESOS Lead Assessor • LCC Building Design
• ESOS Lead Assessor • LCC Building Design
Guernsey Electricity Guernsey
Certified Qualifications:
• LCC Building Design • LCC Building Operation
Thomas, Simon
Brighton Energy Services Hove
Certified Qualifications:
Willmoth, Edward KCS Consulting Portsmouth
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
ESOS Specialism:
• Buildings • Retail • Leisure
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Operation • LCEA DEC
ESOS Specialism:
• Energy and carbon management for commercial & industrial clients • Controls of HVAC Systems • Carbon Footprinting
Certified Qualifications:
Carter, Nicole
Emlett Engineering Ltd Bristol • Offices • Educational buildings • Warehousing & factories
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design • LCC Building Operation • LCC Simulation • LCEA Air Conditioning Inspector Level 3 and 4 • LCEA DEC • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
Building Compliance Ltd Weston-super-Mare Certified Qualifications:
Dale, Anthony
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Day, Dewi Dewi Day Ceredigion
Certified Qualifications:
• LCC Building Operation • LCEA DEC
Faulkes, Duncan Magnus Anthesis Bristol
Certified Qualifications:
• Heat Networks Consultant
Galliers, Shawn David Capita Ltd Gloucester
ESOS Specialism:
• Buildings
Certified Qualifications:
• ESOS Lead Assessor • Heat Networks Consultant • LCC Building Design • LCC Building Operation • LCEA DEC
Gallotta, Alberto Hoare Lea LLP Cardiff
Certified Qualifications:
1 The Coaches, Fields Road, Chedworth, Cheltenham, Gloucestershire, GL54 4NQ Tel: +44 (0)1285 721134 Mob: 07971 787363 Email: matt@inspiredefficiency.co.uk Website: www.inspiredefficiency.co.uk We work across all sectors to offer a range of services including, energy audits, compliance services (ESOS, SECR and DEC’s), energy reporting, M&V and controls optimisation. Our further specialist expertise includes: l Energy
management services to PFI projects l Energy saving projects within schools, including obtaining funding and managing onsite works l Energy
efficiency to listed heritage buildings, with expertise in the ecclesiastical sector.
Our approach to designing and implementing solutions, delivers outcomes which are realistic, pragmatic, but above all... valuable.
80
Crandon, Martin
Darren Evans Assessments Ltd Bristol
ClearLead Consulting Limited Bristol
Certified Qualifications:
Waring, Jack
Certified Qualifications:
• LCEA Air Conditioning Inspector Level 3 and 4
Bryant, George
ESOS Specialism:
4JD Consulting Limited Orpington
Southern Engineering Bristol
• LCC Building Design
Vardill, Darryl Robert
Smith, Daniel • Buildings
Certified Qualifications:
Cottrell, Derrick
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
• ESOS Lead Assessor • LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
• ESOS Lead Assessor • LCC Building Operation • LCEA DEC
Green Fish Consultancy (JCML) Tunbridge Wells
Barton, Paul
DesignCO2 Ltd Bath
• ESOS Lead Assessor • LCC Building Operation
• ESOS Lead Assessor • LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Certified Qualifications:
South West and Wales
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Gitsham, Matthew AECOM Bristol
ESOS Specialism:
• Building Services and refridgeration optimisation • Transport Distribution and Logistics • Project management and Installation of Measures
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Operation • LCEA DEC
Glendinning, Robin Ramboll Bristol
Certified Qualifications:
• Heat Networks Consultant
Griffiths, Hugh
E3 Consulting Engineers Bath Certified Qualifications:
• LCC Building Design
Holman, Paul
Aston Reef Consultant Engineers St Austell Certified Qualifications:
• LCC Building Operation • LCEA DEC
For full contact details of any of the assessors and consultants listed here, and to search the full online register of certified energy experts, visit:
Israel, Gerald
Mundow, David
Certified Qualifications:
ESOS Specialism:
GAI Associates Limited Pontypridd • LCC Building Design • LCC Building Operation • LCC Simulation • LCEA DEC • LCEA EPC Level 3 and 4 EW&NI
Johnn, Nicholas Aardvark EM Ltd Wiveliscombe
Certified Qualifications:
• LCC Energy Management Systems (EnMS)
Knapp, Andrew Coles Knapp Ltd Prestatyn
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Legge, David
e3 Sustainability Limited Wrington ESOS Specialism:
• Retail • Leisure • Education
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design
Linford, Tim TJL Associates Bridport
ESOS Specialism:
• Buildings & Building services • Lignt engineering processes • Compressed air
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design • LCC Building Operation • LCC Simulation • LCEA DEC • LCEA EPC Level 3 and 4 EW&NI
Mathias-Jones, Emma
Greengauge Building Energy Consultants Bristol Certified Qualifications:
• LCC Building Design
Midgley, Sean
Powerful Allies Limited Devizes ESOS Specialism:
• Building Engineering Services and Transport Energy • Sports, Leisure, Recreation and Entertainment Energy Management • Implementation of ISO 50001
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Operation • LCC Energy Management Systems (EnMS) • LCEA DEC
Moin, Delaram
Darren Evans Assessments Ltd Bristol Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
SMS PLC Cardiff
• Energy Reduction Project identification; procurement and delivery • Organisation wide energy management strategy development and delivery • Delivering legislative and regulatory compliance
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Operation • LCEA DEC
Phillips, Nicholas
Energy Management LLP Bristol ESOS Specialism:
Stepto, Robert
EDP Environmental Limited Exeter Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Certified Qualifications:
ESOS Specialism:
Pilcher, Alistair
• ESOS Lead Assessor • LCC Building Design • LCC Building Operation • LCC Simulation • LCEA DEC • LCEA EPC Level 3 and 4 EW&NI
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Pyrintsos, Konstantinos Ridge and Partners LLP Bristol Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Ryan, Simon Richard gridIMP Limited Bridgwater ESOS Specialism:
• Retail • Buildings
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Operation • LCEA DEC
Scott, Ian John
EDP Environmental Limited Dawlish ESOS Specialism:
• Low Carbon Consultant (DECs EPCs) • Energy Management professional • Trained in EN 50001
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design • LCC Building Operation • LCC Simulation • LCEA DEC • LCEA EPC Level 3 and 4 EW&NI
Sharpe, Dale
DAS Temperature Control Cheltenham Certified Qualifications:
• LCEA Air Conditioning Inspector Level 3 and 4
Sims, Keith Victor Cardiff University Cardiff
Tel: 07867 538869 Email: alan@alandeansystems.co.uk Website: www.alandeansystems.co.uk
Services Design Solution Ltd Exeter
Sweetman, Adrian Bruce
Up Energy Exeter
29 Hunt End Lane, Redditch, Worcestershire B97 5UW
Stevens, Adam
• Buildings • Transport • Processes
• ESOS Lead Assessor • LCC Building Design • LCC Building Operation • LCC Simulation • LCEA DEC • LCEA EPC Level 3 and 4 EW&NI
CIBSE CERTIFIED ASSESSORS AND CONSULTANTS
www.cibsecertification.co.uk/Online-Register
We are engineers and energy management consultants who specialise in providing technical support for energy reduction projects.
Acreshort Consulting Chippenham
We have extensive experience in working with companies that within their business utilise thermal processing, including; metal finishing, thermal bonding ovens, food processing and steam boilers.
• Commercial & Industrial Buildings • DECs • Green Deal
Certified Qualifications:
We can provide; site energy surveys, bespoke energy reduction project identification and implementation, ESOS compliance reports and Energy Management Systems (EnMS) e.g. ISO50001 support, for all types of businesses.
Taylor, Mark Russell Unite Students Bristol
Based in the Midlands we cover all areas of the country and will be pleased to discuss any potential or ongoing projects that you may have.
ESOS Specialism:
• ISO 50001 • Commercial Buildings • Large Estates
Certified Qualifications:
• ESOS Lead Assessor • LCC Energy Management Systems (EnMS)
Dhayal, Ashok
Evolusion Innovation UK Ltd Birmingham
West Midlands
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
Anastasakis, Konstantinos
Ridge and Partners LLP Solihull
Gupta, Charu
Building Services Design Ltd Birmingham
Certified Qualifications:
• LCC Building Design
Certified Qualifications:
Coy, Matthew
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
Certified Qualifications:
Harper, Anthony
J S Wright & Co Ltd Birmingham • Heat Networks Consultant
SVM Associates Birmingham
Davies, Michael John
Certified Qualifications:
Davies Management Associates Redditch
• LCEA Air Conditioning Inspector Level 3 and 4
ESOS Specialism:
Hinson, Kevin
• Display Energy Certificates • TM44 Air Conditioning Inspections • Non Domestic EPCs
Certified Qualifications:
MBE Consultants Limited Coventry ESOS Specialism:
• ESOS Lead Assessor • LCC Building Operation • LCEA Air Conditioning Inspector Level 3 and 4 • LCEA DEC
Davis, Shelley
Sustainability By Design Ltd Halesworth Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
• Commercial office buildings
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Operation • LCEA DEC
Kesidis, Alexandros
Couch Perry & Wilkes LLP Solihull Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
Certified Qualifications:
• LCC Building Operation • LCEA DEC WWW.CIBSE.ORG
CIBSE GUIDE TO BUILDING PERFORMANCE 2019 |
81
CIBSE CERTIFIED ASSESSORS AND CONSULTANTS
For full contact details of any of the assessors and consultants listed here, and to search the full online register of certified energy experts, visit:
www.cibsecertification.co.uk/Online-Register
Logo Variants including slogan (VERTICAL)
Logo Variants including slogan
Wade, John David
Briar Consulting Engineers Ltd Stourbridge ESOS Specialism:
• Retail • Buildings • Distribution
Certified Qualifications:
EXERGY, IV7, Innovation Village, Cheetah Road, CUTP, Coventry, Warwickshire CV1 2TL Tel: +44 (0) 2476 158 171 Email: info@exergy-global.com Website: www.exergy-global.com Exergy is an engineering company specialising in sustainable design, energy efficiency and carbon strategy. We have vast experience in delivering energy efficiency assessments and upgrading buildings to high standards. By working with us you will: l Obtain tailored engineering
solutions based on the unique needs of your organisation l Receive accurate results and a
detailed cost assessment plan l Get practical and strategic
advice on how to effectively implement identified opportunities Capitalise on your ESOS investment and contact us today.
Maloney, Keith
Maloney Associates Ltd Market Drayton ESOS Specialism:
• Sports Stadia • Retail • Production
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Operation
Smith, Scott Rolton Group Birmingham
Certified Qualifications:
• Heat Networks Consultant • LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
Turner, Mark Jeffrey Royal HaskoningDHV Birmingham
Certified Qualifications:
• LCC Building Design
Twigg, Robert David Arup Halesowen
Certified Qualifications:
• LCC Building Design
Edmond Shipway Sheffield
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
• ESOS Lead Assessor • LCC Building Design
McLeish, Tom
Yorkshire
• LCC Building Operation
Burnup, Kevin
Ambience Engineering Ltd Wetherby Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI
Dixon, Stuart
SES Engineering Services Ltd Guisborough Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Sodexo Ltd Leeds
Certified Qualifications:
Mullin, Ryan FHP Leeds
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Certified Qualifications:
• LCC Building Design • LCC Design Management Scotland • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 3 and 4 Scotland • LCEA EPC Level 5 EW&NI • LCEA EPC Level 5 Scotland
Swallow, John
TEST Consulting Limited Leeds Certified Qualifications:
Thornton, Patrick
Horizon Building Services Consultants Ltd York Certified Qualifications:
Oliver, Philip Certified Qualifications:
Walker, Nicolas
Kyoob Ltd Gateshead
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
Rodgers, Christopher
Certified Qualifications:
• LCC Building Operation • LCEA DEC
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
Thornley & Lumb Partnership Ltd Bradford
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
Sheffield City Council Sheffield
NG Bailey Ilkey
Sotnyk, Nikolas
• LCC Building Design
Dollan, Luke
Certified Qualifications:
Anderson Green Ltd Sheffield Certified Qualifications:
• LCC Building Design • LCC Building Operation • LCC Simulation • LCEA EPC Level 5 EW&NI
Ward, John Antony Betton Consulting Ltd Malton
Certified Qualifications:
Foster, Ian Stuart
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
ESOS Specialism:
Watson, Malcolm
Foster Building & Energy Services Ltd Warrington
Utilitywise PLC Wakefield
• Building • Transport • Fuel
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design • LCC Building Operation • LCEA Air Conditioning Inspector Level 3 and 4 • LCEA DEC
Garcia, Miquel
Stroma Built Environment Limited Sheffield Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Gill, Robert James Yonder Limited Leeds
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 3 and 4 EW&NI • LCEA EPC Level 5 EW&NI
Greaves, Richard Ylem EPC Limited Warrington
Certified Qualifications:
• Heat Networks Consultant • LCC Building Design
82
Green, Scott Barry
| CIBSE GUIDE TO BUILDING PERFORMANCE 2019
ESOS Specialism: SES Engineering Services Ltd, Moorside, Monks Cross Drive, York, North Yorkshire YO32 9GZ Tel: +44 (0)1904 437340 Email: pnewby@ses-ltd.co.uk Website: www.ses-ltd.co.uk As a 21st Century MEP Contractor, SES has a pivotal role in the performance of the buildings we are involved in. SES develops and creates solutions that optimise efficiency and performance in use. Our in-house building physics engineering team are CIBSE Low Carbon Energy Assessors, complemented by our CIBSE Low Carbon Consultants and digital engineering team, giving us strength in depth. Through collaboration - driven by a culture of performance excellence - we seek to understand our customer's goals, engineer in granular detail from the outset and take an holistic approach to ensure that our designs and installations create tangible value.
• Process refrigeration • Energy Management Systems • Building HVAC Systems
Certified Qualifications:
• ESOS Lead Assessor • LCC Building Design • LCC Building Operation • LCC Simulation • LCEA Air Conditioning Inspector Level 3 and 4 • LCEA DEC • LCEA EPC Level 3 and 4 EW&NI
Watts, Richard James
Evolution Technical Services Ltd Elland Certified Qualifications:
• LCC Building Design • LCC Building Operation
Yousuf, Sharib NG Bailey Leeds
Certified Qualifications:
• LCC Building Design • LCC Simulation • LCEA EPC Level 5 EW&NI
BIM. ACCURATE PIPE DESIGN at your fingertips
FREE!
FEATURING CONNECT TO BETTER
REVIT CONTENT PACKAGE Download yours today!
• Quickest way to a complete ‘as built’ pipe system • Precise designs with intelligent assistance • Fully integrated Bill of Materials Download now at wavin.co.uk/bim
Years of advanced product development...
Result:
NEW COLOUR Since its introduction in 1994, our GOLD air handling unit has been supplied in a distinctive gold finish. We are now changing our approach and will meet the future in grey! However, under the grey colour the really big news is hidden. A uniquely flexible platform. Our highly efficient counterflow heat exchanger. An integrated heat pump and cooling solution. Nevertheless, our new colour is stylish.
swegon.co.uk